! $Header$ SUBROUTINE cv_driver(len, nd, ndp1, ntra, iflag_con, t1, q1, qs1, u1, v1, & tra1, p1, ph1, iflag1, ft1, fq1, fu1, fv1, ftra1, precip1, vprecip1, & cbmf1, sig1, w01, icb1, inb1, delt, ma1, upwd1, dnwd1, dnwd01, qcondc1, & wd1, cape1, da1, phi1, mp1, phi21, d1a1, dam1, sij1, clw1, elij1, & ! ! RomP evap1, ep1, epmlmmm1, eplamm1, & ! RomP wdtraina1, wdtrainm1, & ! RomP epmax_diag1 & ! epmax_cape #ifdef ISO & ,xt1,fxt1 & & ,xtprecip1,xtvprecip1 & & , xtevap1,xtclw1,xtwdtraina1 & #ifdef DIAGISO & , water1,xtwater1,qp1,xtp1 & & , fq_detrainement1,fq_ddft1,fq_fluxmasse1,fq_evapprecip1 & & , fxt_detrainement1,fxt_ddft1,fxt_fluxmasse1, fxt_evapprecip1 & & , f_detrainement1,q_detrainement1,xt_detrainement1 & #endif #endif & ) USE dimphy #ifdef ISO USE infotrac_phy, ONLY: ntraciso=>ntiso,niso,itZonIso,nzone USE isotopes_mod, ONLY: iso_eau,iso_HDO,ridicule,bidouille_anti_divergence #ifdef ISOVERIF use isotopes_verif_mod, ONLY: errmax,errmaxrel,Tmin_verif,deltalim, & iso_verif_egalite_choix,iso_verif_aberrant_choix, & iso_verif_aberrant, iso_verif_positif,iso_verif_positif_nostop #endif #ifdef ISOTRAC use isotrac_mod, only: option_traceurs,izone_ddft,izone_revap, & & izone_poubelle, index_zone,option_tmin,izone_cond #ifdef ISOVERIF USE isotopes_verif_mod, ONLY: iso_verif_traceur,iso_verif_traceur_justmass, & & iso_verif_trac_masse_vect use isotrac_routines_mod, ONLY: iso_verif_traceur_pbidouille #endif #endif #endif USE cv30_routines_mod, ONLY: cv30_param, cv30_prelim, cv30_feed, cv30_undilute1, cv30_trigger, cv30_compress, cv30_undilute2, & cv30_closure, cv30_epmax_fn_cape, cv30_mixing, cv30_unsat, cv30_yield, cv30_tracer, cv30_uncompress IMPLICIT NONE ! .............................START PROLOGUE............................ ! All argument names (except len,nd,ntra,nloc,delt and the flags) have a ! "1" appended. ! The "1" is removed for the corresponding compressed (local) variables. ! PARAMETERS: ! Name Type Usage Description ! ---------- ---------- ------- ---------------------------- ! len Integer Input first (i) dimension ! nd Integer Input vertical (k) dimension ! ndp1 Integer Input nd + 1 ! ntra Integer Input number of tracors ! iflag_con Integer Input version of convect (3/4) ! t1 Real Input temperature ! q1 Real Input specific hum ! qs1 Real Input sat specific hum ! u1 Real Input u-wind ! v1 Real Input v-wind ! tra1 Real Input tracors ! p1 Real Input full level pressure ! ph1 Real Input half level pressure ! iflag1 Integer Output flag for Emanuel conditions ! ft1 Real Output temp tend ! fq1 Real Output spec hum tend ! fu1 Real Output u-wind tend ! fv1 Real Output v-wind tend ! ftra1 Real Output tracor tend ! precip1 Real Output precipitation ! VPrecip1 Real Output vertical profile of ! precipitations ! cbmf1 Real Output cloud base mass flux ! sig1 Real In/Out section adiabatic updraft ! w01 Real In/Out vertical velocity within adiab ! updraft ! delt Real Input time step ! Ma1 Real Output mass flux adiabatic updraft ! upwd1 Real Output total upward mass flux ! (adiab+mixed) ! dnwd1 Real Output saturated downward mass flux ! (mixed) ! dnwd01 Real Output unsaturated downward mass flux ! qcondc1 Real Output in-cld mixing ratio of ! condensed water ! wd1 Real Output downdraft velocity scale for ! sfc fluxes ! cape1 Real Output CAPE ! wdtrainA1 Real Output precipitation detrained from ! adiabatic draught; ! used in tracer transport (cvltr) ! wdtrainM1 Real Output precipitation detrained from mixed ! draughts; ! used in tracer transport (cvltr) ! da1 Real Output used in tracer transport (cvltr) ! phi1 Real Output used in tracer transport (cvltr) ! mp1 Real Output used in tracer transport (cvltr) ! phi21 Real Output used in tracer transport (cvltr) ! d1a1 Real Output used in tracer transport (cvltr) ! dam1 Real Output used in tracer transport (cvltr) ! evap1 Real Output ! ep1 Real Output ! sij1 Real Output ! elij1 Real Output ! S. Bony, Mar 2002: ! * Several modules corresponding to different physical processes ! * Several versions of convect may be used: ! - iflag_con=3: version lmd (previously named convect3) ! - iflag_con=4: version 4.3b (vect. version, previously convect1/2) ! + tard: - iflag_con=5: version lmd with ice (previously named convectg) ! S. Bony, Oct 2002: ! * Vectorization of convect3 (ie version lmd) ! ..............................END PROLOGUE............................. ! Input INTEGER len INTEGER nd INTEGER ndp1 INTEGER noff INTEGER iflag_con INTEGER ntra REAL delt REAL t1(len, nd) REAL q1(len, nd) REAL qs1(len, nd) REAL u1(len, nd) REAL v1(len, nd) REAL tra1(len, nd, ntra) REAL p1(len, nd) REAL ph1(len, ndp1) ! Output INTEGER iflag1(len) REAL ft1(len, nd) REAL fq1(len, nd) REAL fu1(len, nd) REAL fv1(len, nd) REAL ftra1(len, nd, ntra) REAL precip1(len) REAL cbmf1(len) REAL sig1(klon, klev) REAL w01(klon, klev) REAL vprecip1(len, nd+1) REAL evap1(len, nd) !RomP REAL ep1(len, nd) !RomP REAL ma1(len, nd) REAL upwd1(len, nd) REAL dnwd1(len, nd) REAL dnwd01(len, nd) REAL qcondc1(len, nd) ! cld REAL wd1(len) ! gust REAL cape1(len) ! RomP >>> REAL wdtraina1(len, nd), wdtrainm1(len, nd) REAL sij1(len, nd, nd), elij1(len, nd, nd) REAL da1(len, nd), phi1(len, nd, nd), mp1(len, nd) REAL phi21(len, nd, nd) REAL d1a1(len, nd), dam1(len, nd) REAL epmlmmm1(len, nd, nd), eplamm1(len, nd) ! RomP <<< REAL epmax_diag1 (len) ! epmax_cape #ifdef ISO real xt1(ntraciso,len,nd) real fxt1(ntraciso,len,nd) real xtprecip1(ntraciso,len) real xtvprecip1(ntraciso,len,nd+1) real xtevap1(ntraciso,len,nd) real xtwdtraina1(ntraciso,len,nd) real xtelij1(ntraciso,len, nd, nd) #ifdef DIAGISO real water1(len,nd) real xtwater1(ntraciso,len,nd) real qp1(len,nd),xtp1(ntraciso,len,nd) real fq_detrainement1(len,nd) real f_detrainement1(len,nd) real q_detrainement1(len,nd) real fq_ddft1(len,nd) real fq_fluxmasse1(len,nd) real fq_evapprecip1(len,nd) real fxt_detrainement1(ntraciso,len,nd) real xt_detrainement1(ntraciso,len,nd) real fxt_ddft1(ntraciso,len,nd) real fxt_fluxmasse1(ntraciso,len,nd) real fxt_evapprecip1(ntraciso,len,nd) #endif #ifdef ISOVERIF real deltaD #endif #endif ! ------------------------------------------------------------------- ! Original Prologue by Kerry Emanuel. ! ------------------------------------------------------------------- ! --- ARGUMENTS ! ------------------------------------------------------------------- ! --- On input: ! t: Array of absolute temperature (K) of dimension ND, with first ! index corresponding to lowest model level. Note that this array ! will be altered by the subroutine if dry convective adjustment ! occurs and if IPBL is not equal to 0. ! q: Array of specific humidity (gm/gm) of dimension ND, with first ! index corresponding to lowest model level. Must be defined ! at same grid levels as T. Note that this array will be altered ! if dry convective adjustment occurs and if IPBL is not equal to 0. ! qs: Array of saturation specific humidity of dimension ND, with first ! index corresponding to lowest model level. Must be defined ! at same grid levels as T. Note that this array will be altered ! if dry convective adjustment occurs and if IPBL is not equal to 0. ! u: Array of zonal wind velocity (m/s) of dimension ND, witth first ! index corresponding with the lowest model level. Defined at ! same levels as T. Note that this array will be altered if ! dry convective adjustment occurs and if IPBL is not equal to 0. ! v: Same as u but for meridional velocity. ! tra: Array of passive tracer mixing ratio, of dimensions (ND,NTRA), ! where NTRA is the number of different tracers. If no ! convective tracer transport is needed, define a dummy ! input array of dimension (ND,1). Tracers are defined at ! same vertical levels as T. Note that this array will be altered ! if dry convective adjustment occurs and if IPBL is not equal to 0. ! p: Array of pressure (mb) of dimension ND, with first ! index corresponding to lowest model level. Must be defined ! at same grid levels as T. ! ph: Array of pressure (mb) of dimension ND+1, with first index ! corresponding to lowest level. These pressures are defined at ! levels intermediate between those of P, T, Q and QS. The first ! value of PH should be greater than (i.e. at a lower level than) ! the first value of the array P. ! nl: The maximum number of levels to which convection can penetrate, plus ! 1. ! NL MUST be less than or equal to ND-1. ! delt: The model time step (sec) between calls to CONVECT ! ---------------------------------------------------------------------------- ! --- On Output: ! iflag: An output integer whose value denotes the following: ! VALUE INTERPRETATION ! ----- -------------- ! 0 Moist convection occurs. ! 1 Moist convection occurs, but a CFL condition ! on the subsidence warming is violated. This ! does not cause the scheme to terminate. ! 2 Moist convection, but no precip because ep(inb) lt 0.0001 ! 3 No moist convection because new cbmf is 0 and old cbmf is 0. ! 4 No moist convection; atmosphere is not ! unstable ! 6 No moist convection because ihmin le minorig. ! 7 No moist convection because unreasonable ! parcel level temperature or specific humidity. ! 8 No moist convection: lifted condensation ! level is above the 200 mb level. ! 9 No moist convection: cloud base is higher ! then the level NL-1. ! ft: Array of temperature tendency (K/s) of dimension ND, defined at ! same ! grid levels as T, Q, QS and P. ! fq: Array of specific humidity tendencies ((gm/gm)/s) of dimension ND, ! defined at same grid levels as T, Q, QS and P. ! fu: Array of forcing of zonal velocity (m/s^2) of dimension ND, ! defined at same grid levels as T. ! fv: Same as FU, but for forcing of meridional velocity. ! ftra: Array of forcing of tracer content, in tracer mixing ratio per ! second, defined at same levels as T. Dimensioned (ND,NTRA). ! precip: Scalar convective precipitation rate (mm/day). ! VPrecip: Vertical profile of convective precipitation (kg/m2/s). ! wd: A convective downdraft velocity scale. For use in surface ! flux parameterizations. See convect.ps file for details. ! tprime: A convective downdraft temperature perturbation scale (K). ! For use in surface flux parameterizations. See convect.ps ! file for details. ! qprime: A convective downdraft specific humidity ! perturbation scale (gm/gm). ! For use in surface flux parameterizations. See convect.ps ! file for details. ! cbmf: The cloud base mass flux ((kg/m**2)/s). THIS SCALAR VALUE MUST ! BE STORED BY THE CALLING PROGRAM AND RETURNED TO CONVECT AT ! ITS NEXT CALL. That is, the value of CBMF must be "remembered" ! by the calling program between calls to CONVECT. ! det: Array of detrainment mass flux of dimension ND. ! ------------------------------------------------------------------- ! Local arrays INTEGER i, k, n, il, j INTEGER icbmax INTEGER nk1(klon) INTEGER icb1(klon) INTEGER inb1(klon) INTEGER icbs1(klon) REAL plcl1(klon) REAL tnk1(klon) REAL qnk1(klon) REAL gznk1(klon) REAL pnk1(klon) REAL qsnk1(klon) REAL pbase1(klon) REAL buoybase1(klon) REAL lv1(klon, klev) REAL cpn1(klon, klev) REAL tv1(klon, klev) REAL gz1(klon, klev) REAL hm1(klon, klev) REAL h1(klon, klev) REAL tp1(klon, klev) REAL tvp1(klon, klev) REAL clw1(klon, klev) REAL th1(klon, klev) #ifdef ISO integer ixt real xtclw1(ntraciso,klon,klev) REAL xtnk1(ntraciso,klon) #endif INTEGER ncum ! (local) compressed fields: ! ym integer nloc ! ym parameter (nloc=klon) ! pour l'instant #define nloc klon INTEGER idcum(nloc) INTEGER iflag(nloc), nk(nloc), icb(nloc) INTEGER nent(nloc, klev) INTEGER icbs(nloc) INTEGER inb(nloc), inbis(nloc) REAL cbmf(nloc), plcl(nloc), tnk(nloc), qnk(nloc), gznk(nloc) REAL t(nloc, klev), q(nloc, klev), qs(nloc, klev) REAL u(nloc, klev), v(nloc, klev) REAL gz(nloc, klev), h(nloc, klev), lv(nloc, klev), cpn(nloc, klev) REAL p(nloc, klev), ph(nloc, klev+1), tv(nloc, klev), tp(nloc, klev) REAL clw(nloc, klev) REAL dph(nloc, klev) REAL pbase(nloc), buoybase(nloc), th(nloc, klev) REAL tvp(nloc, klev) REAL sig(nloc, klev), w0(nloc, klev) REAL hp(nloc, klev), ep(nloc, klev), sigp(nloc, klev) REAL frac(nloc), buoy(nloc, klev) REAL cape(nloc) REAL m(nloc, klev), ment(nloc, klev, klev), qent(nloc, klev, klev) REAL uent(nloc, klev, klev), vent(nloc, klev, klev) REAL ments(nloc, klev, klev), qents(nloc, klev, klev) REAL sij(nloc, klev, klev), elij(nloc, klev, klev) REAL qp(nloc, klev), up(nloc, klev), vp(nloc, klev) REAL wt(nloc, klev), water(nloc, klev), evap(nloc, klev) REAL b(nloc, klev), ft(nloc, klev), fq(nloc, klev) REAL fu(nloc, klev), fv(nloc, klev) REAL upwd(nloc, klev), dnwd(nloc, klev), dnwd0(nloc, klev) REAL ma(nloc, klev), mike(nloc, klev), tls(nloc, klev) REAL tps(nloc, klev), qprime(nloc), tprime(nloc) REAL precip(nloc) REAL vprecip(nloc, klev+1) REAL tra(nloc, klev, ntra), trap(nloc, klev, ntra) REAL ftra(nloc, klev, ntra), traent(nloc, klev, klev, ntra) REAL qcondc(nloc, klev) ! cld REAL wd(nloc) ! gust ! RomP >>> REAL da(nloc, klev), phi(nloc, klev, klev), mp(nloc, klev) REAL epmlmmm(nloc, klev, klev), eplamm(nloc, klev) REAL phi2(nloc, klev, klev) REAL d1a(nloc, klev), dam(nloc, klev) REAL wdtraina(nloc, klev), wdtrainm(nloc, klev) REAL sigd(nloc) ! RomP <<< REAL epmax_diag(nloc) ! epmax_cape #ifdef ISO real xt(ntraciso,nloc,klev) real xtnk(ntraciso,nloc) real xtclw(ntraciso,nloc,klev) real xtp(ntraciso,nloc,klev) real xtent(ntraciso,nloc,klev,klev) real xtelij(ntraciso,nloc,klev,klev) ! real xtep(ntraciso,nloc,klev) ! le 7 mai: on supprime xtep real xtwater(ntraciso,nloc,klev) real xtevap(ntraciso,nloc,klev) real fxt(ntraciso,nloc,klev) real xtprecip(ntraciso,nloc) real xtvprecip(ntraciso,nloc,klev+1) real xtwdtraina(ntraciso,nloc,klev) #ifdef DIAGISO real fxt_detrainement(ntraciso,nloc,klev) real fxt_fluxmasse(ntraciso,nloc,klev) real fxt_evapprecip(ntraciso,nloc,klev) real fxt_ddft(ntraciso,nloc,klev) real fq_detrainement(nloc,klev) real f_detrainement(nloc,klev) real q_detrainement(nloc,klev) real xt_detrainement(ntraciso,nloc,klev) real fq_fluxmasse(nloc,klev) real fq_evapprecip(nloc,klev) real fq_ddft(nloc,klev) #endif #ifdef ISOTRAC integer iiso,ixt_ddft,ixt_poubelle,ixt_revap integer izone !#ifdef ISOVERIF ! integer iso_verif_positif_nostop !#endif #endif #endif #ifdef ISO ! verif #ifdef ISOVERIF write(*,*) 'cv_driver 391: ENTREE dans cv_driver' ! write(*,*) 'nloc=',nloc if (iso_eau.gt.0) then do k = 1, klev do i = 1, nloc call iso_verif_egalite_choix(xt1(iso_eau,i,k),q1(i,k), & & 'cv_driver 343',errmax,errmaxrel) enddo enddo endif !if (iso_eau.gt.0) then if (iso_HDO.gt.0) then do k = 1, klev do i = 1, nloc if (q1(i,k).gt.ridicule) then call iso_verif_aberrant(xt1(iso_hdo,i,k)/q1(i,k), & & 'cv_driver 362') endif !if (q1(i,k).gt.ridicule) then enddo enddo endif !if (iso_eau.gt.0) then #ifdef ISOTRAC do k = 1, klev do i = 1, klon call iso_verif_traceur(xt1(1,i,k),'cv_driver 413') enddo enddo #endif #endif ! end verif #endif nent(:, :) = 0 ! ------------------------------------------------------------------- ! --- SET CONSTANTS AND PARAMETERS ! ------------------------------------------------------------------- ! print *, '-> cv_driver' !jyg ! -- set simulation flags: ! (common cvflag) CALL cv_flag(0) ! -- set thermodynamical constants: ! (common cvthermo) CALL cv_thermo(iflag_con) ! -- set convect parameters ! includes microphysical parameters and parameters that ! control the rate of approach to quasi-equilibrium) ! (common cvparam) IF (iflag_con==30) THEN CALL cv30_param(nd, delt) END IF IF (iflag_con==4) THEN CALL cv_param(nd) #ifdef ISO write(*,*) 'cv_driver 454: isos pas prevus ici' stop #endif END IF ! --------------------------------------------------------------------- ! --- INITIALIZE OUTPUT ARRAYS AND PARAMETERS ! --------------------------------------------------------------------- inb(:) = 0.0 inb1(:) = 0.0 icb1(:) = 0.0 ft1(:, :) = 0.0 fq1(:, :) = 0.0 fu1(:, :) = 0.0 fv1(:, :) = 0.0 tvp1(:, :) = 0.0 tp1(:, :) = 0.0 clw1(:, :) = 0.0 ! ym clw(:, :) = 0.0 gz1(:, :) = 0. vprecip1(:, :) = 0. ma1(:, :) = 0.0 upwd1(:, :) = 0.0 dnwd1(:, :) = 0.0 dnwd01(:, :) = 0.0 qcondc1(:, :) = 0.0 ftra1(:, :, :) = 0.0 elij1(:, :, :) = 0.0 sij1(:, :, :) = 0.0 precip1(:) = 0.0 iflag1(:) = 0 wd1(:) = 0.0 cape1(:) = 0.0 epmax_diag1(:) = 0.0 ! epmax_cape #ifdef ISOVERIF #ifdef ISOTRAC do k=1,klev do i=1,klon call iso_verif_traceur(xt1(1,i,k),'cv_driver 510') enddo enddo #endif #endif #ifdef ISO fxt1(:,:,:)=0.0 xtclw1(:,:,:)=0.0 xtclw(:,:,:)=0.0 xtvprecip1(:,:,:) = 0. xtelij1(:, :, :, :) = 0.0 #endif IF (iflag_con==30) THEN DO il = 1, len sig1(il, nd) = sig1(il, nd) + 1. sig1(il, nd) = amin1(sig1(il,nd), 12.1) END DO END IF ! RomP >>> wdtraina1(:, :) = 0. wdtrainm1(:, :) = 0. da1(:, :) = 0. phi1(:, :, :) = 0. epmlmmm1(:, :, :) = 0. eplamm1(:, :) = 0. mp1(:, :) = 0. evap1(:, :) = 0. ep1(:, :) = 0. sij1(:, :, :) = 0. elij1(:, :, :) = 0. phi21(:, :, :) = 0. d1a1(:, :) = 0. dam1(:, :) = 0. ! RomP <<< #ifdef ISO xtwdtraina1(:,:,:)=0.0 xtevap1(:,:,:)=0.0 xtelij1(:,:,:,:)=0.0 #ifdef DIAGISO xtwater1(:,:,:)=0.0 fxt_detrainement1(:,:,:)=0.0 xt_detrainement1(:,:,:)=0.0 fxt_ddft1(:,:,:)=0.0 fxt_fluxmasse1(:,:,:)=0.0 fxt_evapprecip1(:,:,:)=0.0 xtp1(:,:,:)=0.0 water1(:,:)=0.0 qp1(:,:)=0.0 fq_detrainement1(:,:)=0.0 fq_ddft1(:,:)=0.0 fq_fluxmasse1(:,:)=0.0 fq_evapprecip1(:,:)=0.0 #endif #endif ! -------------------------------------------------------------------- ! --- CALCULATE ARRAYS OF GEOPOTENTIAL, HEAT CAPACITY & STATIC ENERGY ! -------------------------------------------------------------------- IF (iflag_con==30) THEN ! print*,'Emanuel version 30 ' CALL cv30_prelim(len, nd, ndp1, t1, q1, p1, ph1 & ! nd->na , lv1, cpn1, tv1, gz1, h1, hm1, th1) END IF IF (iflag_con==4) THEN CALL cv_prelim(len, nd, ndp1, t1, q1, p1, ph1, lv1, cpn1, tv1, gz1, h1, & hm1) END IF ! -------------------------------------------------------------------- ! --- CONVECTIVE FEED ! -------------------------------------------------------------------- IF (iflag_con==30) THEN CALL cv30_feed(len, nd, t1, q1, qs1, p1, ph1, hm1, gz1 & ! ! nd->na , nk1, icb1, icbmax, iflag1, tnk1, qnk1, gznk1, plcl1 & #ifdef ISO ,xt1,xtnk1 & #endif ) END IF IF (iflag_con==4) THEN CALL cv_feed(len, nd, t1, q1, qs1, p1, hm1, gz1, nk1, icb1, icbmax, & iflag1, tnk1, qnk1, gznk1, plcl1) END IF ! -------------------------------------------------------------------- ! --- UNDILUTE (ADIABATIC) UPDRAFT / 1st part ! (up through ICB for convect4, up through ICB+1 for convect3) ! Calculates the lifted parcel virtual temperature at nk, the ! actual temperature, and the adiabatic liquid water content. ! -------------------------------------------------------------------- IF (iflag_con==30) THEN #ifdef ISOVERIF write(*,*) 'cv_driver 593: avant cv3_undilute1' do k=1,klev do i=1,klon if (iso_HDO.gt.0) then if (q1(i,k).gt.ridicule) then call iso_verif_aberrant(xt1(iso_hdo,i,k)/q1(i,k), & & 'cv_driver 502') endif ! if (q1(i,k).gt.ridicule) then endif !if (iso_HDO.gt.0) then #ifdef ISOTRAC call iso_verif_traceur(xt1(1,i,k),'cv_driver 601') #endif enddo enddo #endif CALL cv30_undilute1(len, nd, t1, q1, qs1, gz1, plcl1, p1, nk1, icb1 & ! nd->na , tp1, tvp1, clw1, icbs1 & #ifdef ISO & ,xt1,xtclw1 & #endif & ) #ifdef ISO !c--debug #ifdef ISOVERIF write(*,*) 'cv_driver 621: apres cv3_undilute1' do k = 1, klev do i = 1, klon if (iso_eau.gt.0) then call iso_verif_egalite_choix(xtclw1(iso_eau,i,k),clw1(i,k), & & 'undil1',errmax,errmaxrel) call iso_verif_egalite_choix(xt1(iso_eau,i,k),q1(i,k), & & 'undil1',errmax,errmaxrel) endif !if (iso_eau.gt.0) then #ifdef ISOTRAC call iso_verif_traceur(xt1(1,i,k),'cv_driver 623') #endif enddo enddo #endif !write(*,*) 'SORTIE DE CV3_UNDILUTE1' #endif END IF IF (iflag_con==4) THEN CALL cv_undilute1(len, nd, t1, q1, qs1, gz1, p1, nk1, icb1, icbmax, tp1, & tvp1, clw1) END IF ! ------------------------------------------------------------------- ! --- TRIGGERING ! ------------------------------------------------------------------- IF (iflag_con==30) THEN CALL cv30_trigger(len, nd, icb1, plcl1, p1, th1, tv1, tvp1 & ! ! nd->na , pbase1, buoybase1, iflag1, sig1, w01) END IF IF (iflag_con==4) THEN CALL cv_trigger(len, nd, icb1, cbmf1, tv1, tvp1, iflag1) END IF ! ===================================================================== ! --- IF THIS POINT IS REACHED, MOIST CONVECTIVE ADJUSTMENT IS NECESSARY ! ===================================================================== ncum = 0 DO i = 1, len IF (iflag1(i)==0) THEN ncum = ncum + 1 idcum(ncum) = i END IF END DO ! print*,'cv_driver : klon, ncum = ',len,ncum IF (ncum>0) THEN ! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ! --- COMPRESS THE FIELDS ! (-> vectorization over convective gridpoints) ! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ IF (iflag_con==30) THEN #ifdef ISO #ifdef ISOVERIF !write(*,*) 'xt1(iso_eau,1,1),q1(1,1)=',xt1(iso_eau,1,1),q1(1,1) !write(*,*) 'xt1(iso_eau,14,1),q1(14,1)=',xt1(iso_eau,14,1),q1(14,1) do k = 1, klev do i = 1, nloc if (iso_eau.gt.0) then call iso_verif_egalite_choix(xtclw1(iso_eau,i,k),clw1(i,k), & & 'cv_driver 541a',errmax,errmaxrel) call iso_verif_egalite_choix(xt1(iso_eau,i,k),q1(i,k), & & 'cv_driver 541b',errmax,errmaxrel) endif ! if (iso_eau.gt.0) then #ifdef ISOTRAC call iso_verif_traceur(xt1(1,i,k),'cv_driver 689') #endif enddo enddo #endif #endif CALL cv30_compress(len, nloc, ncum, nd, ntra, iflag1, nk1, icb1, icbs1, & plcl1, tnk1, qnk1, gznk1, pbase1, buoybase1, t1, q1, qs1, u1, v1, & gz1, th1, tra1, h1, lv1, cpn1, p1, ph1, tv1, tp1, tvp1, clw1, sig1, & w01, iflag, nk, icb, icbs, plcl, tnk, qnk, gznk, pbase, buoybase, t, & q, qs, u, v, gz, th, tra, h, lv, cpn, p, ph, tv, tp, tvp, clw, sig, & w0 & #ifdef ISO & ,xtnk1,xt1,xtclw1 & & ,xtnk,xt,xtclw & #endif & ) #ifdef ISO #ifdef ISOVERIF write(*,*) 'cv_driver 720: apres cv3_compress' do k = 1, klev do i = 1, ncum if (iso_eau.gt.0) then call iso_verif_egalite_choix(xtclw(iso_eau,i,k),clw(i,k), & & 'cv_driver 598',errmax,errmaxrel) call iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), & & 'cv_driver 600',errmax,errmaxrel) endif ! if (iso_eau.gt.0) then if (iso_HDO.gt.0) then call iso_verif_aberrant_choix( & & xt(iso_HDO,i,k),q(i,k), & & ridicule,deltalim,'cv_driver 735, apres compress') endif !if (iso_HDO.gt.0) then #ifdef ISOTRAC call iso_verif_traceur(xt(1,i,k),'cv_driver 726') #endif enddo enddo if (iso_eau.gt.0) then do i = 1, ncum call iso_verif_egalite_choix(xtnk(iso_eau,i),qnk(i), & & 'cv_driver 834',errmax,errmaxrel) enddo endif !if (iso_eau.gt.0) then #endif #endif END IF IF (iflag_con==4) THEN CALL cv_compress(len, nloc, ncum, nd, iflag1, nk1, icb1, cbmf1, plcl1, & tnk1, qnk1, gznk1, t1, q1, qs1, u1, v1, gz1, h1, lv1, cpn1, p1, ph1, & tv1, tp1, tvp1, clw1, iflag, nk, icb, cbmf, plcl, tnk, qnk, gznk, t, & q, qs, u, v, gz, h, lv, cpn, p, ph, tv, tp, tvp, clw, dph) END IF ! ------------------------------------------------------------------- ! --- UNDILUTE (ADIABATIC) UPDRAFT / second part : ! --- FIND THE REST OF THE LIFTED PARCEL TEMPERATURES ! --- & ! --- COMPUTE THE PRECIPITATION EFFICIENCIES AND THE ! --- FRACTION OF PRECIPITATION FALLING OUTSIDE OF CLOUD ! --- & ! --- FIND THE LEVEL OF NEUTRAL BUOYANCY ! ------------------------------------------------------------------- IF (iflag_con==30) THEN CALL cv30_undilute2(nloc, ncum, nd, icb, icbs, nk & !na->nd , tnk, qnk, gznk, t, q, qs, gz, p, h, tv, lv, pbase, buoybase, plcl, & inb, tp, tvp, clw, hp, ep, sigp, buoy & #ifdef ISO & ,xtnk,xt,xtclw & #endif & ) #ifdef ISO #ifdef ISOVERIF write(*,*) 'cv_driver 863: apres call cv30_undilute2' do k = 1, klev do i = 1, ncum if (iso_eau.gt.0) then call iso_verif_egalite_choix(xtclw(iso_eau,i,k),clw(i,k), & & 'cv_driver 650',errmax,errmaxrel) call iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), & & 'cv_driver 652',errmax,errmaxrel) endif ! if (iso_eau.gt.0) then if (iso_HDO.gt.0) then call iso_verif_aberrant_choix( & & xt(iso_HDO,i,k),q(i,k), & & ridicule,deltalim,'cv_driver 794, apres undilute2') endif !if (iso_HDO.gt.0) then #ifdef ISOTRAC call iso_verif_traceur(xt(1,i,k),'cv_driver 780trac') call iso_verif_traceur(xtclw(1,i,k),'cv_driver 781trac') #endif enddo enddo #endif !write(*,*) 'SORTIE CV3_UNDILUTE2' #endif END IF IF (iflag_con==4) THEN CALL cv_undilute2(nloc, ncum, nd, icb, nk, tnk, qnk, gznk, t, q, qs, & gz, p, dph, h, tv, lv, inb, inbis, tp, tvp, clw, hp, ep, sigp, frac) END IF ! ------------------------------------------------------------------- ! --- CLOSURE ! ------------------------------------------------------------------- IF (iflag_con==30) THEN CALL cv30_closure(nloc, ncum, nd, icb, inb & ! na->nd , pbase, p, ph, tv, buoy, sig, w0, cape, m) ! epmax_cape call cv30_epmax_fn_cape(nloc,ncum,nd & ,cape,ep,hp,icb,inb,clw,nk,t,h,lv & ,epmax_diag) ! on écrase ep et recalcule hp END IF IF (iflag_con==4) THEN CALL cv_closure(nloc, ncum, nd, nk, icb, tv, tvp, p, ph, dph, plcl, & cpn, iflag, cbmf) END IF ! ------------------------------------------------------------------- ! --- MIXING ! ------------------------------------------------------------------- IF (iflag_con==30) THEN CALL cv30_mixing(nloc, ncum, nd, nd, ntra, icb, nk, inb & ! ! na->nd , ph, t, q, qs, u, v, tra, h, lv, qnk, hp, tv, tvp, ep, clw, m, sig, & ment, qent, uent, vent, sij, elij, ments, qents, traent & #ifdef ISO & ,xt,xtnk,xtclw & & ,xtent,xtelij & #endif & ) #ifdef ISO #ifdef ISOVERIF write(*,*) 'cv_driver 837: apres cv3_mixing' do k = 1, klev do j = 1, klev do i = 1, ncum if (iso_eau.gt.0) then call iso_verif_egalite_choix(xtelij(iso_eau,i,j,k), & & elij(i,j,k),'cv_driver 881',errmax,errmaxrel) call iso_verif_egalite_choix(xtent(iso_eau,i,j,k), & & qent(i,j,k),'cv_driver 882',errmax,errmaxrel) endif ! if (iso_eau.gt.0) then #ifdef ISOTRAC call iso_verif_traceur_justmass(xtent(1,i,j,k), & & 'cv_driver 846') call iso_verif_traceur_justmass(xtelij(1,i,j,k), & & 'cv_driver 847') ! on ne verifie pas le deltaD ici car peut depasser le seuil ! raisonable pour temperatures tres froides. #endif enddo enddo enddo !do k = 1, klev do k = 1, klev do i = 1, ncum if (iso_eau.gt.0) then call iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), & & 'cv_driver 709',errmax,errmaxrel) endif ! if (iso_eau.gt.0) then #ifdef ISOTRAC call iso_verif_traceur(xt(1,i,k),'cv_driver 856') if (option_tmin.eq.1) then if (iso_verif_positif_nostop(xtclw(itZonIso( & & izone_cond,iso_eau),i,k)-xtclw(iso_eau,i,k) & & ,'cv_driver 909').eq.1) then write(*,*) 'i,k=',i,k write(*,*) 'xtclw=',xtclw(:,i,k) stop endif !if (iso_verif_positif_nostop(xtclw(itZonIso( endif !if ((option_traceurs.eq.17).or. #endif enddo enddo !do k = 1, klev #endif #endif END IF IF (iflag_con==4) THEN CALL cv_mixing(nloc, ncum, nd, icb, nk, inb, inbis, ph, t, q, qs, u, v, & h, lv, qnk, hp, tv, tvp, ep, clw, cbmf, m, ment, qent, uent, vent, & nent, sij, elij) END IF ! ------------------------------------------------------------------- ! --- UNSATURATED (PRECIPITATING) DOWNDRAFTS ! ------------------------------------------------------------------- IF (iflag_con==30) THEN #ifdef ISO #ifdef ISOVERIF do k = 1, klev do i = 1, ncum if (iso_eau.gt.0) then call iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), & & 'cv_driver 753',errmax,errmaxrel) endif ! if (iso_eau.gt.0) then #ifdef ISOTRAC call iso_verif_traceur(xt(1,i,k),'cv_driver 885') #endif enddo enddo !do k = 1, klev #endif #endif ! RomP >>> CALL cv30_unsat(nloc, ncum, nd, nd, ntra, icb, inb & ! na->nd , t, q, qs, gz, u, v, tra, p, ph, th, tv, lv, cpn, ep, sigp, clw, m, & ment, elij, delt, plcl, mp, qp, up, vp, trap, wt, water, evap, b, & wdtraina, wdtrainm & #ifdef ISO & ,xt,xtclw,xtelij & & ,xtp,xtwater,xtevap,xtwdtraina & #endif & ) ! RomP <<< #ifdef ISO ! write(*,*) 'klev=',klev #ifdef ISOVERIF write(*,*) 'cv_driver 930: apres cv3_unsat' do k = 1, klev do i = 1, ncum if (iso_eau.gt.0) then ! write(*,*) 'i,k=',i,k call iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), & & 'cv_driver 778',errmax,errmaxrel) call iso_verif_egalite_choix(xtp(iso_eau,i,k), & & qp(i,k),'cv_driver 780',errmax,errmaxrel) call iso_verif_egalite_choix( & & xtwater(iso_eau,i,k),water(i,k), & & 'cv_driver 782',errmax,errmaxrel) call iso_verif_egalite_choix(xtevap(iso_eau,i,k), & & evap(i,k),'cv_driver 784',errmax,errmaxrel) endif ! if (iso_eau.gt.0) then #ifdef ISOTRAC call iso_verif_traceur(xt(1,i,k),'cv_driver 939') call iso_verif_traceur(xtp(1,i,k),'cv_driver 940') call iso_verif_traceur(xtwater(1,i,k),'cv_driver 941') call iso_verif_traceur_justmass(xtevap(1,i,k), & & 'cv_driver 942') if (bidouille_anti_divergence) then call iso_verif_traceur_pbidouille( & & xtp(1,i,k),'cv_driver 956') call iso_verif_traceur_pbidouille( & & xtwater(1,i,k),'cv_driver 958') endif #endif enddo !do i = 1, ncum enddo !do k = 1, klev #endif #endif END IF IF (iflag_con==4) THEN CALL cv_unsat(nloc, ncum, nd, inb, t, q, qs, gz, u, v, p, ph, h, lv, & ep, sigp, clw, m, ment, elij, iflag, mp, qp, up, vp, wt, water, evap) END IF #ifdef ISO #ifdef ISOTRAC if (option_traceurs.eq.6) then ! on colorie les ddfts en rouge, le reste est en blanc. do k = 1, klev do i = 1, ncum do iiso=1,niso ixt_ddft=itZonIso(izone_ddft,iiso) ixt_poubelle=itZonIso(izone_poubelle,iiso) xtp(ixt_ddft,i,k)=xtp(ixt_ddft,i,k) & & +xtp(ixt_poubelle,i,k) xtp(ixt_poubelle,i,k)=0.0 enddo !do iiso=1,niso #ifdef ISOVERIF call iso_verif_traceur(xtp(1,i,k),'cv_driver 990') #endif enddo !do i = 1, ncum enddo !do k = 1, klev else if (option_traceurs.eq.19) then ! on colorie les ddfts, mais on sauve la revap do k = 1, klev do i = 1, ncum do izone=1,nzone if (izone.eq.izone_ddft) then do iiso=1,niso ixt_ddft=itZonIso(izone,iiso) ixt_revap=itZonIso(izone_revap,iiso) xtp(ixt_ddft,i,k)=xtp(iiso,i,k)-xtp(ixt_revap,i,k) enddo !do iiso=1,niso elseif (izone.eq.izone_ddft) then ! rien a faire else !if (izone.eq.izone_ddft) then do iiso=1,niso ixt=itZonIso(izone,iiso) xtp(ixt,i,k)=0.0 enddo !do iiso=1,niso endif !if (izone.eq.izone_ddft) then enddo !do izone=1,nzone #ifdef ISOVERIF call iso_verif_traceur(xtp(1,i,k),'cv_driver 1059') #endif enddo !do i = 1, ncum enddo !do k = 1, klev endif !if (option_traceurs.eq.6) then #endif #endif ! ------------------------------------------------------------------- ! --- YIELD ! (tendencies, precipitation, variables of interface with other ! processes, etc) ! ------------------------------------------------------------------- IF (iflag_con==30) THEN CALL cv30_yield(nloc, ncum, nd, nd, ntra & ! na->nd , icb, inb, delt, t, q, u, v, tra, gz, p, ph, h, hp, lv, cpn, th, ep, & clw, m, tp, mp, qp, up, vp, trap, wt, water, evap, b, ment, qent, & uent, vent, nent, elij, traent, sig, tv, tvp, iflag, precip, vprecip, & ft, fq, fu, fv, ftra, upwd, dnwd, dnwd0, ma, mike, tls, tps, qcondc, & wd & #ifdef ISO & ,xt,xtclw,xtp,xtwater,xtevap & & ,xtent,xtelij,xtprecip,fxt,xtVPrecip & #ifdef DIAGISO & ,fq_detrainement,fq_ddft,fq_fluxmasse,fq_evapprecip & & ,fxt_detrainement,fxt_ddft,fxt_fluxmasse,fxt_evapprecip & & ,f_detrainement,q_detrainement,xt_detrainement & #endif #endif & ) #ifdef ISOVERIF DO k = 1, nd DO i = 1, ncum if (iso_eau.gt.0) then call iso_verif_egalite_choix(fxt(iso_eau,i,k), & & fq(i,k),'cv_driver 1086',errmax,errmaxrel) endif !if (iso_HDO.gt.0) then if (iso_HDO.gt.0) then if (q(i,k).gt.ridicule) then call iso_verif_aberrant( & & (xt(iso_HDO,i,k)+delt*fxt(iso_HDO,i,k)) & & /(q(i,k)+delt*fq(i,k)),'cv_driver 855') endif endif #ifdef ISOTRAC call iso_verif_traceur(xt(1,i,k),'cv_driver 1008') #endif enddo enddo #endif END IF IF (iflag_con==4) THEN CALL cv_yield(nloc, ncum, nd, nk, icb, inb, delt, t, q, u, v, gz, p, & ph, h, hp, lv, cpn, ep, clw, frac, m, mp, qp, up, vp, wt, water, & evap, ment, qent, uent, vent, nent, elij, tv, tvp, iflag, wd, qprime, & tprime, precip, cbmf, ft, fq, fu, fv, ma, qcondc) END IF ! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ! --- passive tracers ! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ IF (iflag_con==30) THEN ! RomP >>> CALL cv30_tracer(nloc, len, ncum, nd, nd, ment, sij, da, phi, phi2, & d1a, dam, ep, vprecip, elij, clw, epmlmmm, eplamm, icb, inb) ! RomP <<< END IF ! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ! --- UNCOMPRESS THE FIELDS ! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ! set iflag1 =42 for non convective points DO i = 1, len iflag1(i) = 42 END DO IF (iflag_con==30) THEN CALL cv30_uncompress(nloc, len, ncum, nd, ntra, idcum, iflag, precip, & vprecip, evap, ep, sig, w0 & !RomP , ft, fq, fu, fv, ftra, inb, ma, upwd, dnwd, dnwd0, qcondc, wd, cape, & da, phi, mp, phi2, d1a, dam, sij & !RomP , elij, clw, epmlmmm, eplamm & !RomP , wdtraina, wdtrainm,epmax_diag & !RomP , iflag1, precip1, vprecip1, evap1, ep1, sig1, w01 & !RomP , ft1, fq1, fu1, fv1, ftra1, inb1, ma1, upwd1, dnwd1, dnwd01, & qcondc1, wd1, cape1, da1, phi1, mp1, phi21, d1a1, dam1, sij1 & !RomP , elij1, clw1, epmlmmm1, eplamm1 & !RomP , wdtraina1, wdtrainm1,epmax_diag1 & !RomP #ifdef ISO & ,xtprecip,fxt,xtVPrecip,xtevap,xtclw,xtwdtraina & & ,xtprecip1,fxt1,xtVPrecip1,xtevap1,xtclw1,xtwdtraina1 & #ifdef DIAGISO & , water,xtwater,qp,xtp & & , fq_detrainement,fq_ddft,fq_fluxmasse,fq_evapprecip & & , fxt_detrainement,fxt_ddft,fxt_fluxmasse, fxt_evapprecip & & , f_detrainement,q_detrainement,xt_detrainement & & , water1,xtwater1,qp1,xtp1 & & , fq_detrainement1,fq_ddft1,fq_fluxmasse1,fq_evapprecip1 & & , fxt_detrainement1,fxt_ddft1,fxt_fluxmasse1, fxt_evapprecip1 & & , f_detrainement1,q_detrainement1,xt_detrainement1 & #endif #endif & ) !RomP #ifdef ISO #ifdef ISOVERIF DO k = 1, nd DO i = 1, len if (iso_eau.gt.0) then call iso_verif_egalite_choix(fxt1(iso_eau,i,k), & & fq1(i,k),'cv_driver 1170',errmax,errmaxrel) endif !if (iso_HDO.gt.0) then if (iso_HDO.gt.0) then if (q1(i,k).gt.ridicule) then call iso_verif_aberrant( & & (xt1(iso_HDO,i,k)+delt*fxt1(iso_HDO,i,k)) & & /(q1(i,k)+delt*fq1(i,k)),'cv_driver 2554') endif endif enddo !DO i = 1, len enddo !DO k = 1, nd #ifdef ISOTRAC call iso_verif_trac_masse_vect(fxt1,len,nd, & & 'cv_driver 1200',errmax,errmaxrel) #endif #endif #endif END IF IF (iflag_con==4) THEN CALL cv_uncompress(nloc, len, ncum, nd, idcum, iflag, precip, cbmf, ft, & fq, fu, fv, ma, qcondc, iflag1, precip1, cbmf1, ft1, fq1, fu1, fv1, & ma1, qcondc1) END IF END IF ! ncum>0 ! print *, 'fin cv_driver ->' !jyg RETURN END SUBROUTINE cv_driver ! ================================================================== SUBROUTINE cv_flag(iflag_ice_thermo) USE cvthermo_mod_h, ONLY: cpd, cpv, cl, ci, rrv, rrd, lv0, lf0, g, rowl, t0, clmcpv, clmcpd, cpdmcp, cpvmcpd, cpvmcl & , clmci, eps, epsi, epsim1, ginv, hrd, grav USE cvflag_mod_h, ONLY: icvflag_Tpa, cvflag_grav, cvflag_ice, ok_optim_yield, ok_entrain, ok_homo_tend, & ok_convstop, ok_intermittent, cvflag_prec_eject, qsat_depends_on_qt, adiab_ascent_mass_flux_depends_on_ejectliq, keepbug_ice_frac USE ioipsl_getin_p_mod, ONLY : getin_p USE yomcst_mod_h, ONLY: RPI, RCLUM, RHPLA, RKBOL, RNAVO & , RDAY, REA, REPSM, RSIYEA, RSIDAY, ROMEGA & , R_ecc, R_peri, R_incl & , RA, RG, R1SA & , RSIGMA & , R, RMD, RMV, RD, RV, RCPD & , RMO3, RMCO2, RMC, RMCH4, RMN2O, RMCFC11, RMCFC12 & , RCPV, RCVD, RCVV, RKAPPA, RETV, eps_w & , RCW, RCS & , RLVTT, RLSTT, RLMLT, RTT, RATM & , RESTT, RALPW, RBETW, RGAMW, RALPS, RBETS, RGAMS & , RALPD, RBETD, RGAMD IMPLICIT NONE ! Argument : iflag_ice_thermo : ice thermodynamics is taken into account if ! iflag_ice_thermo >=1 INTEGER iflag_ice_thermo ! -- si .TRUE., on rend la gravite plus explicite et eventuellement ! differente de 10.0 dans convect3: cvflag_grav = .TRUE. cvflag_ice = iflag_ice_thermo >= 1 ! ! si icvflag_Tpa=0, alors la fraction de glace dans l'ascendance adiabatique est ! fonction de la temperature de l'environnement et la temperature de l'ascendance est ! calculee en deux iterations, une en supposant qu'il n'y a pas de glace et l'autre ! en ajoutant la glace (ancien schema d'Arnaud Jam). ! si icvflag_Tpa=1, alors la fraction de glace dans l'ascendance adiabatique est ! fonction de la temperature de l'environnement et la temperature de l'ascendance est ! calculee en une seule iteration. ! si icvflag_Tpa=2, alors la fraction de glace dans l'ascendance adiabatique est ! fonction de la temperature de l'ascendance et la temperature de l'ascendance est ! calculee en une seule iteration. icvflag_Tpa=0 call getin_p('icvflag_Tpa', icvflag_Tpa) RETURN END SUBROUTINE cv_flag ! ================================================================== SUBROUTINE cv_thermo(iflag_con) USE yomcst_mod_h, ONLY: RPI, RCLUM, RHPLA, RKBOL, RNAVO & , RDAY, REA, REPSM, RSIYEA, RSIDAY, ROMEGA & , R_ecc, R_peri, R_incl & , RA, RG, R1SA & , RSIGMA & , R, RMD, RMV, RD, RV, RCPD & , RMO3, RMCO2, RMC, RMCH4, RMN2O, RMCFC11, RMCFC12 & , RCPV, RCVD, RCVV, RKAPPA, RETV, eps_w & , RCW, RCS & , RLVTT, RLSTT, RLMLT, RTT, RATM & , RESTT, RALPW, RBETW, RGAMW, RALPS, RBETS, RGAMS & , RALPD, RBETD, RGAMD USE cvthermo_mod_h, ONLY: cpd, cpv, cl, ci, rrv, rrd, lv0, lf0, g, rowl, t0, clmcpv, clmcpd, cpdmcp, cpvmcpd, cpvmcl & , clmci, eps, epsi, epsim1, ginv, hrd, grav IMPLICIT NONE ! ------------------------------------------------------------- ! Set thermodynamical constants for convectL ! ------------------------------------------------------------- INTEGER iflag_con ! original set from convect: IF (iflag_con==4) THEN cpd = 1005.7 cpv = 1870.0 cl = 4190.0 rrv = 461.5 rrd = 287.04 lv0 = 2.501E6 g = 9.8 t0 = 273.15 grav = g ELSE ! constants consistent with LMDZ: cpd = rcpd cpv = rcpv cl = rcw ci = rcs rrv = rv rrd = rd lv0 = rlvtt lf0 = rlstt - rlvtt g = rg ! not used in convect3 ! ori t0 = RTT t0 = 273.15 ! convect3 (RTT=273.16) ! maf grav= 10. ! implicitely or explicitely used in convect3 grav = g ! implicitely or explicitely used in convect3 END IF rowl = 1000.0 !(a quelle variable de YOMCST cela correspond-il?) clmcpv = cl - cpv clmcpd = cl - cpd clmci = cl - ci cpdmcp = cpd - cpv cpvmcpd = cpv - cpd cpvmcl = cl - cpv ! for convect3 eps = rrd/rrv epsi = 1.0/eps epsim1 = epsi - 1.0 ! ginv=1.0/g ginv = 1.0/grav hrd = 0.5*rrd RETURN END SUBROUTINE cv_thermo