! radiation_flux.F90 - Derived type to store the output fluxes ! (C) Copyright 2014- ECMWF. ! This software is licensed under the terms of the Apache Licence Version 2.0 ! which can be obtained at http://www.apache.org/licenses/LICENSE-2.0. ! In applying this licence, ECMWF does not waive the privileges and immunities ! granted to it by virtue of its status as an intergovernmental organisation ! nor does it submit to any jurisdiction. ! Author: Robin Hogan ! Email: r.j.hogan@ecmwf.int ! Modifications ! 2017-09-08 R. Hogan Store g-point fluxes ! 2017-10-23 R. Hogan Renamed single-character variables ! 2019-01-08 R. Hogan Added "indexed_sum_profile" ! 2019-01-14 R. Hogan out_of_physical_bounds calls routine in radiation_config ! 2021-01-20 R. Hogan Added heating_rate_out_of_physical_bounds function module radiation_flux use parkind1, only : jprb implicit none public !--------------------------------------------------------------------- ! This derived type contains the output from the radiation ! calculation. Currently this is solely flux profiles, but in ! future surface fluxes in each band may be stored in order that the ! calling program can compute surface-radiation such as ! photosynthetically active radiation and UV index. type flux_type ! All the following are broad-band fluxes in W m-2 with ! dimensions (ncol,nlev+1). Note that only those fluxes that are ! requested will be used, so clear-sky and direct-beam arrays may ! not be allocated real(jprb), allocatable, dimension(:,:) :: & & lw_up, lw_dn, & ! Upwelling and downwelling longwave & sw_up, sw_dn, & ! Upwelling and downwelling shortwave & sw_dn_direct, & ! Direct-beam shortwave into a horizontal plane & lw_up_clear, lw_dn_clear, & ! Clear-sky quantities... & sw_up_clear, sw_dn_clear, & & sw_dn_direct_clear ! As above but fluxes in each spectral band in W m-2 with ! dimensions (nband,ncol,nlev+1). These are only allocated if ! config%do_save_spectral_flux==.true. real(jprb), allocatable, dimension(:,:,:) :: & & lw_up_band, lw_dn_band, & ! Upwelling and downwelling longwave & sw_up_band, sw_dn_band, & ! Upwelling and downwelling shortwave & sw_dn_direct_band, & ! Direct-beam shortwave & lw_up_clear_band, lw_dn_clear_band, & ! Clear-sky quantities... & sw_up_clear_band, sw_dn_clear_band, & & sw_dn_direct_clear_band ! Surface downwelling quantaties at each g point, dimensioned ! (ng,ncol), that are always saved by the solver, except for the ! clear-sky ones that are only produced if ! config%do_clear==.true. real(jprb), allocatable, dimension(:,:) :: & & lw_dn_surf_g, lw_dn_surf_clear_g, & & sw_dn_diffuse_surf_g, sw_dn_direct_surf_g, & & sw_dn_diffuse_surf_clear_g, sw_dn_direct_surf_clear_g ! Shortwave downwelling spectral fluxes in W m-2 at the surface, ! from which quantities such as photosynthetically active and UV ! radiation can be computed. Only allocated in ! config%do_surface_sw_spectral_flux==.true. Note that the ! clear-sky quantities are only computed if ! config%do_clear==.true., but direct fluxes are computed whether ! or not do_direct==.true.. The dimensions are (nband,ncol). real(jprb), allocatable, dimension(:,:) :: & & sw_dn_surf_band, sw_dn_direct_surf_band, & & sw_dn_surf_clear_band, sw_dn_direct_surf_clear_band ! Surface downwelling fluxes in W m-2 at the spectral resolution ! needed by any subsequent canopy radiative transfer. If ! config%use_canopy_full_spectrum_[sw|lw] then these will be at ! g-point resolution; otherwise they will be at ! config%n_albedo_bands and config%n_emiss_bands resolution. real(jprb), allocatable, dimension(:,:) :: & & lw_dn_surf_canopy, & & sw_dn_diffuse_surf_canopy, sw_dn_direct_surf_canopy ! Diagnosed cloud cover from the short- and long-wave solvers real(jprb), allocatable, dimension(:) :: & & cloud_cover_lw, cloud_cover_sw ! Longwave derivatives needed by Hogan and Bozzo (2015) method ! for approximate longwave updates in between the full radiation ! calls: rate of change of upwelling broad-band flux with respect ! to surface value, dimensioned (ncol,nlev+1) real(jprb), allocatable, dimension(:,:) :: & & lw_derivatives contains procedure :: allocate => allocate_flux_type procedure :: deallocate => deallocate_flux_type procedure :: calc_surface_spectral procedure :: out_of_physical_bounds procedure :: heating_rate_out_of_physical_bounds end type flux_type ! Added for DWD (2020) #ifdef __SX__ logical, parameter :: use_indexed_sum_vec = .true. #else logical, parameter :: use_indexed_sum_vec = .false. #endif contains !--------------------------------------------------------------------- ! Allocate arrays for flux profiles, using config to define which ! fluxes are needed. The arrays are dimensioned for columns between ! istartcol, iendcol and levels from 1 to nlev+1 subroutine allocate_flux_type(this, config, istartcol, iendcol, nlev) use yomhook, only : lhook, dr_hook use radiation_io, only : nulerr, radiation_abort use radiation_config, only : config_type integer, intent(in) :: istartcol, iendcol, nlev class(flux_type), intent(inout) :: this type(config_type), intent(in) :: config real(jprb) :: hook_handle if (lhook) call dr_hook('radiation_flux:allocate',0,hook_handle) ! Allocate longwave arrays if (config%do_lw) then allocate(this%lw_up(istartcol:iendcol,nlev+1)) allocate(this%lw_dn(istartcol:iendcol,nlev+1)) if (config%do_clear) then allocate(this%lw_up_clear(istartcol:iendcol,nlev+1)) allocate(this%lw_dn_clear(istartcol:iendcol,nlev+1)) end if if (config%do_save_spectral_flux) then if (config%n_spec_lw == 0) then write(nulerr,'(a)') '*** Error: number of LW spectral points to save not yet defined ' & & // 'so cannot allocate spectral flux arrays' call radiation_abort() end if allocate(this%lw_up_band(config%n_spec_lw,istartcol:iendcol,nlev+1)) allocate(this%lw_dn_band(config%n_spec_lw,istartcol:iendcol,nlev+1)) if (config%do_clear) then allocate(this%lw_up_clear_band(config%n_spec_lw, & & istartcol:iendcol,nlev+1)) allocate(this%lw_dn_clear_band(config%n_spec_lw, & & istartcol:iendcol,nlev+1)) end if end if if (config%do_lw_derivatives) then allocate(this%lw_derivatives(istartcol:iendcol,nlev+1)) end if ! Allocate g-point downwelling fluxes at surface passed from ! solver to surface_intermediate%partition allocate(this%lw_dn_surf_g(config%n_g_lw,istartcol:iendcol)) if (config%do_clear) then allocate(this%lw_dn_surf_clear_g(config%n_g_lw,istartcol:iendcol)) end if if (config%do_canopy_fluxes_lw) then ! Downward fluxes at top of canopy at the spectral resolution ! used in the canopy radiative transfer scheme allocate(this%lw_dn_surf_canopy(config%n_canopy_bands_lw,istartcol:iendcol)) end if end if ! Allocate shortwave arrays if (config%do_sw) then allocate(this%sw_up(istartcol:iendcol,nlev+1)) allocate(this%sw_dn(istartcol:iendcol,nlev+1)) if (config%do_sw_direct) then allocate(this%sw_dn_direct(istartcol:iendcol,nlev+1)) end if if (config%do_clear) then allocate(this%sw_up_clear(istartcol:iendcol,nlev+1)) allocate(this%sw_dn_clear(istartcol:iendcol,nlev+1)) if (config%do_sw_direct) then allocate(this%sw_dn_direct_clear(istartcol:iendcol,nlev+1)) end if end if if (config%do_save_spectral_flux) then if (config%n_spec_sw == 0) then write(nulerr,'(a)') '*** Error: number of SW spectral points to save not yet defined ' & & // 'so cannot allocate spectral flux arrays' call radiation_abort() end if allocate(this%sw_up_band(config%n_spec_sw,istartcol:iendcol,nlev+1)) allocate(this%sw_dn_band(config%n_spec_sw,istartcol:iendcol,nlev+1)) if (config%do_sw_direct) then allocate(this%sw_dn_direct_band(config%n_spec_sw, & & istartcol:iendcol,nlev+1)) end if if (config%do_clear) then allocate(this%sw_up_clear_band(config%n_spec_sw, & & istartcol:iendcol,nlev+1)) allocate(this%sw_dn_clear_band(config%n_spec_sw, & & istartcol:iendcol,nlev+1)) if (config%do_sw_direct) then allocate(this%sw_dn_direct_clear_band(config%n_spec_sw, & & istartcol:iendcol, nlev+1)) end if end if end if if (config%do_surface_sw_spectral_flux) then if (config%n_bands_sw == 0) then write(nulerr,'(a)') '*** Error: number of SW bands not yet defined ' & & // 'so cannot allocate surface spectral flux arrays' call radiation_abort() end if allocate(this%sw_dn_surf_band(config%n_bands_sw,istartcol:iendcol)) allocate(this%sw_dn_direct_surf_band(config%n_bands_sw,istartcol:iendcol)) if (config%do_clear) then allocate(this%sw_dn_surf_clear_band(config%n_bands_sw, & & istartcol:iendcol)) allocate(this%sw_dn_direct_surf_clear_band(config%n_bands_sw, & & istartcol:iendcol)) end if end if ! Allocate g-point downwelling fluxes at surface passed from ! solver to surface_intermediate%partition allocate(this%sw_dn_diffuse_surf_g(config%n_g_sw,istartcol:iendcol)) allocate(this%sw_dn_direct_surf_g (config%n_g_sw,istartcol:iendcol)) if (config%do_clear) then allocate(this%sw_dn_diffuse_surf_clear_g(config%n_g_sw,istartcol:iendcol)) allocate(this%sw_dn_direct_surf_clear_g (config%n_g_sw,istartcol:iendcol)) end if if (config%do_canopy_fluxes_sw) then ! Downward fluxes at top of canopy at the spectral resolution ! used in the canopy radiative transfer scheme allocate(this%sw_dn_diffuse_surf_canopy(config%n_canopy_bands_sw,istartcol:iendcol)) allocate(this%sw_dn_direct_surf_canopy (config%n_canopy_bands_sw,istartcol:iendcol)) end if end if ! Allocate cloud cover arrays allocate(this%cloud_cover_lw(istartcol:iendcol)) allocate(this%cloud_cover_sw(istartcol:iendcol)) ! Some solvers may not write to cloud cover, so we initialize to ! an unphysical value this%cloud_cover_lw = -1.0_jprb this%cloud_cover_sw = -1.0_jprb if (lhook) call dr_hook('radiation_flux:allocate',1,hook_handle) end subroutine allocate_flux_type !--------------------------------------------------------------------- ! Deallocate flux arrays subroutine deallocate_flux_type(this) use yomhook, only : lhook, dr_hook class(flux_type), intent(inout) :: this real(jprb) :: hook_handle if (lhook) call dr_hook('radiation_flux:deallocate',0,hook_handle) if (allocated(this%lw_up)) then deallocate(this%lw_up) if (allocated(this%lw_dn)) deallocate(this%lw_dn) if (allocated(this%lw_up_clear)) deallocate(this%lw_up_clear) if (allocated(this%lw_dn_clear)) deallocate(this%lw_dn_clear) end if if (allocated(this%sw_up)) then deallocate(this%sw_up) if (allocated(this%sw_dn)) deallocate(this%sw_dn) if (allocated(this%sw_up_clear)) deallocate(this%sw_up_clear) if (allocated(this%sw_dn_clear)) deallocate(this%sw_dn_clear) if (allocated(this%sw_dn_direct)) deallocate(this%sw_dn_direct) if (allocated(this%sw_dn_direct_clear)) & & deallocate(this%sw_dn_direct_clear) end if if (allocated(this%lw_up_band)) then deallocate(this%lw_up_band) if (allocated(this%lw_dn_band)) deallocate(this%lw_dn_band) if (allocated(this%lw_up_clear_band)) deallocate(this%lw_up_clear_band) if (allocated(this%lw_dn_clear_band)) deallocate(this%lw_dn_clear_band) end if if (allocated(this%sw_up_band)) then deallocate(this%sw_up_band) if (allocated(this%sw_dn_band)) deallocate(this%sw_dn_band) if (allocated(this%sw_up_clear_band)) deallocate(this%sw_up_clear_band) if (allocated(this%sw_dn_clear_band)) deallocate(this%sw_dn_clear_band) if (allocated(this%sw_dn_direct_band)) deallocate(this%sw_dn_direct_band) if (allocated(this%sw_dn_direct_clear_band)) & & deallocate(this%sw_dn_direct_clear_band) end if if (allocated(this%sw_dn_surf_band)) then deallocate(this%sw_dn_surf_band) deallocate(this%sw_dn_direct_surf_band) end if if (allocated(this%sw_dn_surf_clear_band)) then deallocate(this%sw_dn_surf_clear_band) deallocate(this%sw_dn_direct_surf_clear_band) end if if (allocated(this%lw_dn_surf_canopy)) deallocate(this%lw_dn_surf_canopy) if (allocated(this%sw_dn_diffuse_surf_canopy)) deallocate(this%sw_dn_diffuse_surf_canopy) if (allocated(this%sw_dn_direct_surf_canopy)) deallocate(this%sw_dn_direct_surf_canopy) if (allocated(this%cloud_cover_sw)) then deallocate(this%cloud_cover_sw) end if if (allocated(this%cloud_cover_lw)) then deallocate(this%cloud_cover_lw) end if if (allocated(this%lw_derivatives)) then deallocate(this%lw_derivatives) end if if (allocated(this%lw_dn_surf_g)) deallocate(this%lw_dn_surf_g) if (allocated(this%lw_dn_surf_clear_g)) deallocate(this%lw_dn_surf_clear_g) if (allocated(this%sw_dn_diffuse_surf_g)) deallocate(this%sw_dn_diffuse_surf_g) if (allocated(this%sw_dn_direct_surf_g)) deallocate(this%sw_dn_direct_surf_g) if (allocated(this%sw_dn_diffuse_surf_clear_g)) deallocate(this%sw_dn_diffuse_surf_clear_g) if (allocated(this%sw_dn_direct_surf_clear_g)) deallocate(this%sw_dn_direct_surf_clear_g) if (lhook) call dr_hook('radiation_flux:deallocate',1,hook_handle) end subroutine deallocate_flux_type !--------------------------------------------------------------------- ! Calculate surface downwelling fluxes in each band using the ! downwelling surface fluxes at each g point subroutine calc_surface_spectral(this, config, istartcol, iendcol) use yomhook, only : lhook, dr_hook use radiation_config, only : config_type class(flux_type), intent(inout) :: this type(config_type), intent(in) :: config integer, intent(in) :: istartcol, iendcol integer :: jcol, jband, jalbedoband, nalbedoband ! Longwave surface downwelling in each band needed to compute ! canopy fluxes real(jprb) :: lw_dn_surf_band(config%n_bands_lw,istartcol:iendcol) real(jprb) :: hook_handle if (lhook) call dr_hook('radiation_flux:calc_surface_spectral',0,hook_handle) if (config%do_sw .AND. config%do_surface_sw_spectral_flux) then if (use_indexed_sum_vec) then call indexed_sum_vec(this%sw_dn_direct_surf_g, & & config%i_band_from_reordered_g_sw, & & this%sw_dn_direct_surf_band, istartcol, iendcol) call indexed_sum_vec(this%sw_dn_diffuse_surf_g, & & config%i_band_from_reordered_g_sw, & & this%sw_dn_surf_band, istartcol, iendcol) DO jcol = istartcol,iendcol this%sw_dn_surf_band(:,jcol) & & = this%sw_dn_surf_band(:,jcol) & & + this%sw_dn_direct_surf_band(:,jcol) end do else DO jcol = istartcol,iendcol call indexed_sum(this%sw_dn_direct_surf_g(:,jcol), & & config%i_band_from_reordered_g_sw, & & this%sw_dn_direct_surf_band(:,jcol)) call indexed_sum(this%sw_dn_diffuse_surf_g(:,jcol), & & config%i_band_from_reordered_g_sw, & & this%sw_dn_surf_band(:,jcol)) this%sw_dn_surf_band(:,jcol) & & = this%sw_dn_surf_band(:,jcol) & & + this%sw_dn_direct_surf_band(:,jcol) end do end if if (config%do_clear) then if (use_indexed_sum_vec) then call indexed_sum_vec(this%sw_dn_direct_surf_clear_g, & & config%i_band_from_reordered_g_sw, & & this%sw_dn_direct_surf_clear_band, istartcol, iendcol) call indexed_sum_vec(this%sw_dn_diffuse_surf_clear_g, & & config%i_band_from_reordered_g_sw, & & this%sw_dn_surf_clear_band, istartcol, iendcol) DO jcol = istartcol,iendcol this%sw_dn_surf_clear_band(:,jcol) & & = this%sw_dn_surf_clear_band(:,jcol) & & + this%sw_dn_direct_surf_clear_band(:,jcol) end do else DO jcol = istartcol,iendcol call indexed_sum(this%sw_dn_direct_surf_clear_g(:,jcol), & & config%i_band_from_reordered_g_sw, & & this%sw_dn_direct_surf_clear_band(:,jcol)) call indexed_sum(this%sw_dn_diffuse_surf_clear_g(:,jcol), & & config%i_band_from_reordered_g_sw, & & this%sw_dn_surf_clear_band(:,jcol)) this%sw_dn_surf_clear_band(:,jcol) & & = this%sw_dn_surf_clear_band(:,jcol) & & + this%sw_dn_direct_surf_clear_band(:,jcol) end do end if end if end if ! do_surface_sw_spectral_flux ! Fluxes in bands required for canopy radiative transfer if (config%do_sw .AND. config%do_canopy_fluxes_sw) then if (config%use_canopy_full_spectrum_sw) then this%sw_dn_diffuse_surf_canopy(:,istartcol:iendcol) = this%sw_dn_diffuse_surf_g(:,istartcol:iendcol) this%sw_dn_direct_surf_canopy (:,istartcol:iendcol) = this%sw_dn_direct_surf_g (:,istartcol:iendcol) else if (config%do_nearest_spectral_sw_albedo) then if (use_indexed_sum_vec) then call indexed_sum_vec(this%sw_dn_direct_surf_g, & & config%i_albedo_from_band_sw(config%i_band_from_reordered_g_sw), & & this%sw_dn_direct_surf_canopy, istartcol, iendcol) call indexed_sum_vec(this%sw_dn_diffuse_surf_g, & & config%i_albedo_from_band_sw(config%i_band_from_reordered_g_sw), & & this%sw_dn_diffuse_surf_canopy, istartcol, iendcol) else DO jcol = istartcol,iendcol call indexed_sum(this%sw_dn_direct_surf_g(:,jcol), & & config%i_albedo_from_band_sw(config%i_band_from_reordered_g_sw), & & this%sw_dn_direct_surf_canopy(:,jcol)) call indexed_sum(this%sw_dn_diffuse_surf_g(:,jcol), & & config%i_albedo_from_band_sw(config%i_band_from_reordered_g_sw), & & this%sw_dn_diffuse_surf_canopy(:,jcol)) end do end if else ! More accurate calculations using weights, but requires ! this%sw_dn_[direct_]surf_band to be defined, i.e. ! config%do_surface_sw_spectral_flux == .true. nalbedoband = size(config%sw_albedo_weights,1) this%sw_dn_diffuse_surf_canopy(:,istartcol:iendcol) = 0.0_jprb this%sw_dn_direct_surf_canopy (:,istartcol:iendcol) = 0.0_jprb DO jband = 1,config%n_bands_sw DO jalbedoband = 1,nalbedoband if (config%sw_albedo_weights(jalbedoband,jband) /= 0.0_jprb) then ! Initially, "diffuse" is actually "total" this%sw_dn_diffuse_surf_canopy(jalbedoband,istartcol:iendcol) & & = this%sw_dn_diffuse_surf_canopy(jalbedoband,istartcol:iendcol) & & + config%sw_albedo_weights(jalbedoband,jband) & & * this%sw_dn_surf_band(jband,istartcol:iendcol) this%sw_dn_direct_surf_canopy(jalbedoband,istartcol:iendcol) & & = this%sw_dn_direct_surf_canopy(jalbedoband,istartcol:iendcol) & & + config%sw_albedo_weights(jalbedoband,jband) & & * this%sw_dn_direct_surf_band(jband,istartcol:iendcol) end if end do end do ! Subtract the direct from total to get diffuse this%sw_dn_diffuse_surf_canopy(:,istartcol:iendcol) & & = this%sw_dn_diffuse_surf_canopy(:,istartcol:iendcol) & & - this%sw_dn_direct_surf_canopy(:,istartcol:iendcol) end if end if ! do_canopy_fluxes_sw if (config%do_lw .AND. config%do_canopy_fluxes_lw) then if (config%use_canopy_full_spectrum_lw) then this%lw_dn_surf_canopy(:,istartcol:iendcol) = this%lw_dn_surf_g(:,istartcol:iendcol) else if (config%do_nearest_spectral_lw_emiss) then if (use_indexed_sum_vec) then call indexed_sum_vec(this%lw_dn_surf_g, & & config%i_emiss_from_band_lw(config%i_band_from_reordered_g_lw), & & this%lw_dn_surf_canopy, istartcol, iendcol) else DO jcol = istartcol,iendcol call indexed_sum(this%lw_dn_surf_g(:,jcol), & & config%i_emiss_from_band_lw(config%i_band_from_reordered_g_lw), & & this%lw_dn_surf_canopy(:,jcol)) end do end if else ! Compute fluxes in each longwave emissivity interval using ! weights; first sum over g points to get the values in bands if (use_indexed_sum_vec) then call indexed_sum_vec(this%lw_dn_surf_g, & & config%i_band_from_reordered_g_lw, & & lw_dn_surf_band, istartcol, iendcol) else DO jcol = istartcol,iendcol call indexed_sum(this%lw_dn_surf_g(:,jcol), & & config%i_band_from_reordered_g_lw, & & lw_dn_surf_band(:,jcol)) end do end if nalbedoband = size(config%lw_emiss_weights,1) this%lw_dn_surf_canopy(:,istartcol:iendcol) = 0.0_jprb DO jband = 1,config%n_bands_lw DO jalbedoband = 1,nalbedoband if (config%lw_emiss_weights(jalbedoband,jband) /= 0.0_jprb) then this%lw_dn_surf_canopy(jalbedoband,istartcol:iendcol) & & = this%lw_dn_surf_canopy(jalbedoband,istartcol:iendcol) & & + config%lw_emiss_weights(jalbedoband,jband) & & * lw_dn_surf_band(jband,istartcol:iendcol) end if end do end do end if end if if (lhook) call dr_hook('radiation_flux:calc_surface_spectral',1,hook_handle) end subroutine calc_surface_spectral !--------------------------------------------------------------------- ! Return .true. if the most important flux variables are out of a ! physically sensible range, optionally only considering columns ! between istartcol and iendcol function out_of_physical_bounds(this, istartcol, iendcol) result(is_bad) use yomhook, only : lhook, dr_hook use radiation_check, only : out_of_bounds_2d class(flux_type), intent(inout) :: this integer, optional,intent(in) :: istartcol, iendcol logical :: is_bad real(jprb) :: hook_handle if (lhook) call dr_hook('radiation_flux:out_of_physical_bounds',0,hook_handle) is_bad = out_of_bounds_2d(this%lw_up, 'lw_up', 10.0_jprb, 900.0_jprb, .false., i1=istartcol, i2=iendcol) & & .or. out_of_bounds_2d(this%lw_dn, 'lw_dn', 0.0_jprb, 800.0_jprb, .false., i1=istartcol, i2=iendcol) & & .or. out_of_bounds_2d(this%sw_up, 'sw_up', 0.0_jprb, 1500.0_jprb, .false., i1=istartcol, i2=iendcol) & & .or. out_of_bounds_2d(this%sw_dn, 'sw_dn', 0.0_jprb, 1500.0_jprb, .false., i1=istartcol, i2=iendcol) & & .or. out_of_bounds_2d(this%sw_dn_direct, 'sw_dn_direct', 0.0_jprb, 1500.0_jprb, .false., i1=istartcol, i2=iendcol) & & .or. out_of_bounds_2d(this%lw_derivatives, 'lw_derivatives', 0.0_jprb, 1.0_jprb, .false., i1=istartcol, i2=iendcol) & & .or. out_of_bounds_2d(this%sw_dn_surf_band, 'sw_dn_surf_band', 0.0_jprb, 1500.0_jprb, & & .false., j1=istartcol, j2=iendcol) & & .or. out_of_bounds_2d(this%sw_dn_surf_clear_band, 'sw_dn_surf_clear_band', 0.0_jprb, 1500.0_jprb, & & .false., j1=istartcol, j2=iendcol) if (lhook) call dr_hook('radiation_flux:out_of_physical_bounds',1,hook_handle) end function out_of_physical_bounds !--------------------------------------------------------------------- ! Return .true. if the heating rates are out of a physically ! sensible range, optionally only considering columns between ! istartcol and iendcol. This function allocates and deallocates ! memory due to the requirements for inputs of out_of_bounds_2d. function heating_rate_out_of_physical_bounds(this, nlev, istartcol, iendcol, pressure_hl) result(is_bad) use radiation_check, only : out_of_bounds_2d use radiation_constants, only : AccelDueToGravity ! "Cp" (J kg-1 K-1) real(jprb), parameter :: SpecificHeatDryAir = 1004.0 class(flux_type), intent(inout) :: this integer, intent(in) :: istartcol, iendcol, nlev logical :: is_bad real(jprb), intent(in) :: pressure_hl(:,:) real(jprb), allocatable :: hr_K_day(:,:) real(jprb) :: scaling(istartcol:iendcol,nlev) allocate(hr_K_day(istartcol:iendcol,nlev)) scaling = -(24.0_jprb * 3600.0_jprb * AccelDueToGravity / SpecificHeatDryAir) & & / (pressure_hl(istartcol:iendcol,2:nlev+1) - pressure_hl(istartcol:iendcol,1:nlev)) ! Shortwave hr_K_day = scaling * (this%sw_dn(istartcol:iendcol,2:nlev+1) - this%sw_up(istartcol:iendcol,2:nlev+1) & & -this%sw_dn(istartcol:iendcol,1:nlev) + this%sw_up(istartcol:iendcol,1:nlev)) is_bad = out_of_bounds_2d(hr_K_day, 'sw_heating_rate_K_day', 0.0_jprb, 200.0_jprb, & & .false., i1=istartcol, i2=iendcol) ! Longwave hr_K_day = scaling * (this%lw_dn(istartcol:iendcol,2:nlev+1) - this%lw_up(istartcol:iendcol,2:nlev+1) & & -this%lw_dn(istartcol:iendcol,1:nlev) + this%lw_up(istartcol:iendcol,1:nlev)) is_bad = is_bad .or. out_of_bounds_2d(hr_K_day, 'lw_heating_rate_K_day', -250.0_jprb, 150.0_jprb, & & .false., i1=istartcol, i2=iendcol) deallocate(hr_K_day) end function heating_rate_out_of_physical_bounds !--------------------------------------------------------------------- ! Sum elements of "source" into "dest" according to index "ind". ! "source" and "ind" should have the same size and bounds, and no ! element of "ind" should refer outside the bounds of "dest". This ! version increments existing contents of "dest". pure subroutine add_indexed_sum(source, ind, dest) real(jprb), intent(in) :: source(:) integer, intent(in) :: ind(:) real(jprb), intent(inout) :: dest(:) integer :: ig, jg, istart, iend istart = lbound(source,1) iend = ubound(source,1) DO jg = istart, iend ig = ind(jg) dest(ig) = dest(ig) + source(jg) end do end subroutine add_indexed_sum !--------------------------------------------------------------------- ! As "add_indexed_sum" but this version overwrites existing contents ! of "dest" pure subroutine indexed_sum(source, ind, dest) real(jprb), intent(in) :: source(:) integer, intent(in) :: ind(:) real(jprb), intent(out) :: dest(:) integer :: ig, jg, istart, iend dest = 0.0 istart = lbound(source,1) iend = ubound(source,1) DO jg = istart, iend ig = ind(jg) dest(ig) = dest(ig) + source(jg) end do end subroutine indexed_sum !--------------------------------------------------------------------- ! Vectorized version of "add_indexed_sum" subroutine indexed_sum_vec(source, ind, dest, ist, iend) real(jprb), intent(in) :: source(:,:) integer, intent(in) :: ind(:) real(jprb), intent(out) :: dest(:,:) integer, intent(in) :: ist, iend integer :: ig, jg, jc dest = 0.0 DO jg = lbound(source,1), ubound(source,1) ig = ind(jg) DO jc = ist, iend dest(ig,jc) = dest(ig,jc) + source(jg,jc) end do end do end subroutine indexed_sum_vec !--------------------------------------------------------------------- ! As "add_indexed_sum" but a whole vertical profiles pure subroutine add_indexed_sum_profile(source, ind, dest) real(jprb), intent(in) :: source(:,:) integer, intent(in) :: ind(:) real(jprb), intent(out) :: dest(:,:) integer :: ig, jg, istart, iend, jlev, nlev istart = lbound(source,1) iend = ubound(source,1) nlev = size(source,2) DO jlev = 1,nlev DO jg = istart, iend ig = ind(jg) dest(ig,jlev) = dest(ig,jlev) + source(jg,jlev) end do end do end subroutine add_indexed_sum_profile !--------------------------------------------------------------------- ! As "indexed_sum" but a whole vertical profiles pure subroutine indexed_sum_profile(source, ind, dest) real(jprb), intent(in) :: source(:,:) integer, intent(in) :: ind(:) real(jprb), intent(out) :: dest(:,:) integer :: ig, jg, istart, iend, jlev, nlev dest = 0.0 istart = lbound(source,1) iend = ubound(source,1) nlev = size(source,2) DO jlev = 1,nlev DO jg = istart, iend ig = ind(jg) dest(ig,jlev) = dest(ig,jlev) + source(jg,jlev) end do end do end subroutine indexed_sum_profile end module radiation_flux