!$Id: infotrac.F90 4301 2022-10-20 11:57:21Z dcugnet $ ! MODULE infotrac_phy USE strings_mod, ONLY: msg, maxlen, cat, dispTable, int2str, bool2str, strStack, strParse, strCount, strIdx USE readTracFiles_mod, ONLY: readTracersFiles, maxTableWidth, isot_type, addPhase, addKey, iH2O, & indexUpdate, trac_type, testTracersFiles, processIsotopes, tracers, delPhase, getKey, tran0, & isoKeys, isoName, isoZone, isoPhas, isoSelect, itZonIso, nbIso, isotope, & niso, ntiso, nzone, nphas, iqWIsoPha, iqIsoPha, ixIso, isoCheck USE readTracFiles_mod, ONLY: new2oldH2O IMPLICIT NONE PRIVATE !=== FOR TRACERS: PUBLIC :: init_infotrac_phy !--- Initialization of the tracers PUBLIC :: tracers, type_trac !--- Full tracers database, tracers type keyword PUBLIC :: nqtot, nbtr, nqo, nqCO2, nqtottr !--- Main dimensions PUBLIC :: conv_flg, pbl_flg !--- Convection & boundary layer activation keys PUBLIC :: new2oldH2O !--- For backwards compatibility in phyetat0 PUBLIC :: addPhase, delPhase !--- Add/remove the phase from the name of a tracer #if defined CPP_StratAer || defined REPROBUS PUBLIC :: nbtr_bin, nbtr_sulgas !--- Number of aerosols bins and sulfur gases for StratAer model PUBLIC :: id_OCS_strat, id_SO2_strat, id_H2SO4_strat, id_BIN01_strat, id_TEST_strat #endif !=== FOR ISOTOPES: General PUBLIC :: isot_type, nbIso !--- Derived type, full isotopes families database + nb of families PUBLIC :: isoSelect, ixIso !--- Isotopes family selection tool + selected family index !=== FOR ISOTOPES: Specific to water PUBLIC :: iH2O !--- Value of "ixIso" for "H2O" isotopes class PUBLIC :: ivap, iliq, isol !=== FOR ISOTOPES: Depending on the selected isotopes family PUBLIC :: isotope !--- Selected isotopes database (argument of getKey) PUBLIC :: isoKeys, isoName, isoZone, isoPhas !--- Isotopes keys & names, tagging zones names, phases PUBLIC :: niso, ntiso, nzone, nphas !--- Number of " " PUBLIC :: itZonIso !--- Index "it" in "isoName(1:niso)" = f(tagging idx, isotope idx) PUBLIC :: iqIsoPha !--- Index "iq" in "qx" = f(isotope idx, phase idx) PUBLIC :: iqWIsoPha !--- Same as iqIsoPha but with normal water phases PUBLIC :: isoCheck !--- Run isotopes checking routines !=== FOR BOTH TRACERS AND ISOTOPES PUBLIC :: getKey !--- Get a key from "tracers" or "isotope" !=== CONVENTIONS FOR TRACERS NUMBERS: ! |--------------------+-----------------------+-----------------+---------------+----------------------------| ! | water in different | water tagging | water isotopes | other tracers | additional tracers moments | ! | phases: H2O_[glsrb]| isotopes | | | for higher order schemes | ! |--------------------+-----------------------+-----------------+---------------+----------------------------| ! | | | | | | ! |<-- nqo -->|<-- nqo*niso* nzone -->|<-- nqo*niso -->|<-- nbtr -->|<-- (nmom) -->| ! | | | | ! | |<-- nqo*niso*(nzone+1) = nqo*ntiso -->|<-- nqtottr = nbtr + nmom -->| ! | = nqtot - nqo*(ntiso+1) | ! | | ! |<-- nqtrue = nbtr + nqo*(ntiso+1) -->| | ! | | ! |<-- nqtot = nqtrue + nmom -->| ! | | ! |-----------------------------------------------------------------------------------------------------------| ! NOTES FOR THIS TABLE: ! * Used "niso", "nzone" and "ntiso" are components of "isotopes(ip)" for water (isotopes(ip)%parent == 'H2O'), ! since water is so far the sole tracers family, except passive CO2, removed from the main tracers table. ! * For water, "nqo" is equal to the more general field "isotopes(ip)%nphas". ! * "niso", "nzone", "ntiso", "nphas" are defined for other isotopic tracers families, if any. ! !=== DERIVED TYPE EMBEDDING MOST OF THE TRACERS-RELATED QUANTITIES (LENGTH: nqtot) ! Each entry is accessible using "%" sign. ! |-------------+------------------------------------------------------+-------------+------------------------+ ! | entry | Meaning | Former name | Possible values | ! |-------------+------------------------------------------------------+-------------+------------------------+ ! | name | Name (short) | tname | | ! | keys | key/val pairs accessible with "getKey" routine | / | | ! | gen0Name | Name of the 1st generation ancestor | / | | ! | parent | Name of the parent | / | | ! | longName | Long name (with adv. scheme suffix) for outputs | ttext | | ! | type | Type (so far: tracer or tag) | / | tracer,tag | ! | phase | Phases list ("g"as / "l"iquid / "s"olid | | [g|l|s|r|b] | ! | | "r"(cloud) / "b"lowing) | / | | ! | component | Name(s) of the merged/cumulated section(s) | / | coma-separated names | ! | iGeneration | Generation (>=1) | / | | ! | iqParent | Index of the parent tracer | iqpere | 1:nqtot | ! | iqDescen | Indexes of the childs (all generations) | iqfils | 1:nqtot | ! | nqDescen | Number of the descendants (all generations) | nqdesc | 1:nqtot | ! | nqChildren | Number of childs (1st generation only) | nqfils | 1:nqtot | ! | isAdvected | Advected tracers flag (.TRUE. if iadv >= 0) | / | nqtrue .TRUE. values | ! | isInPhysics | Tracers not extracted from the main table in physics | / | nqtottr .TRUE. values | ! | iso_iGroup | Isotopes group index in isotopes(:) | / | 1:nbIso | ! | iso_iName | Isotope name index in isotopes(iso_iGroup)%trac(:) | iso_indnum | 1:niso | ! | iso_iZone | Isotope zone index in isotopes(iso_iGroup)%zone(:) | zone_num | 1:nzone | ! | iso_iPhas | Isotope phase index in isotopes(iso_iGroup)%phas(:) | phase_num | 1:nphas | ! +-------------+------------------------------------------------------+-------------+------------------------+ ! !=== DERIVED TYPE EMBEDDING MOST OF THE ISOTOPES-RELATED QUANTITIES (LENGTH: nbIso, NUMBER OF ISOTOPES FAMILIES) ! Each entry is accessible using "%" sign. ! |-----------------+--------------------------------------------------+--------------------+-----------------+ ! | entry | length | Meaning | Former name | Possible values | ! |-----------------+--------------------------------------------------+--------------------+-----------------+ ! | parent | Parent tracer (isotopes family name) | | | ! | keys | niso | Isotopes keys/values pairs list + number | | | ! | trac | ntiso | Isotopes + tagging tracers list + number | / | ntraciso | | ! | zone | nzone | Geographic tagging zones list + number | / | ntraceurs_zone | | ! | phase | nphas | Phases list + number | | [g|l|s|r|b] 1:5 | ! | iqIsoPha | Index in "qx" = f(name(1:ntiso)),phas) | iqiso | 1:nqtot | ! | iqWIsoPha | Index in "qx" = f(name(1:ntiso+nqo)),phas) | / | 1:nqtot | ! | itZonIso | Index in "trac(1:ntiso)"= f(zone, name(1:niso)) | index_trac | 1:ntiso | ! +-----------------+--------------------------------------------------+--------------------+-----------------+ !=== INDICES FOR WATER INTEGER, SAVE :: ivap, iliq, isol !$OMP THREADPRIVATE(ivap, iliq, isol) !=== DIMENSIONS OF THE TRACERS TABLES AND OTHER SCALAR VARIABLES INTEGER, SAVE :: nqtot, & !--- Tracers nb in dynamics (incl. higher moments + H2O) nbtr, & !--- Tracers nb in physics (excl. higher moments + H2O) nqo, & !--- Number of water phases nqtottr, & !--- Number of tracers passed to phytrac (TO BE DELETED ?) nqCO2 !--- Number of tracers of CO2 (ThL) CHARACTER(LEN=maxlen), SAVE :: type_trac !--- Keyword for tracers type(s) !$OMP THREADPRIVATE(nqtot, nbtr, nqo, nqtottr, nqCO2, type_trac) !=== VARIABLES FOR INCA INTEGER, DIMENSION(:), SAVE, ALLOCATABLE :: & conv_flg, pbl_flg !--- Convection / boundary layer activation (nbtr) !$OMP THREADPRIVATE(conv_flg, pbl_flg) #if defined CPP_StratAer || defined REPROBUS !=== SPECIFIC TO STRATOSPHERIC AEROSOLS (CK/OB) INTEGER, SAVE :: nbtr_bin, nbtr_sulgas !--- number of aerosols bins and sulfur gases for StratAer model !$OMP THREADPRIVATE(nbtr_bin, nbtr_sulgas) INTEGER, SAVE :: id_OCS_strat, id_SO2_strat, id_H2SO4_strat, id_BIN01_strat, id_TEST_strat !$OMP THREADPRIVATE(id_OCS_strat, id_SO2_strat, id_H2SO4_strat, id_BIN01_strat, id_TEST_strat) #endif CONTAINS SUBROUTINE init_infotrac_phy USE ioipsl_getin_p_mod, ONLY: getin_p USE mod_phys_lmdz_para, ONLY: is_master, is_omp_master #ifdef REPROBUS USE CHEM_REP, ONLY: Init_chem_rep_trac #endif IMPLICIT NONE !============================================================================================================================== ! ! Auteur: P. Le Van /L. Fairhead/F.Hourdin ! ------- ! ! Modifications: ! -------------- ! 05/94: F.Forget Modif special traceur ! 02/02: M-A Filiberti Lecture de traceur.def ! 01/22: D. Cugnet Nouveaux tracer.def et tracer_*.def + encapsulation (types trac_type et isot_type) ! ! Objet: ! ------ ! GCM LMD nouvelle grille ! !============================================================================================================================== ! ... modification de l'integration de q ( 26/04/94 ) .... !------------------------------------------------------------------------------------------------------------------------------ ! Declarations: INCLUDE "dimensions.h" INCLUDE "iniprint.h" !------------------------------------------------------------------------------------------------------------------------------ ! Local variables INTEGER, ALLOCATABLE :: hadv(:), vadv(:) !--- Horizontal/vertical transport scheme number #ifdef INCA INTEGER, ALLOCATABLE :: had (:), hadv_inca(:), conv_flg_inca(:), &!--- Variables specific to INCA vad (:), vadv_inca(:), pbl_flg_inca(:) CHARACTER(LEN=8), ALLOCATABLE :: solsym_inca(:) !--- Tracers names for INCA INTEGER :: nqINCA #endif #ifdef CPP_StratAer CHARACTER(LEN=maxlen), ALLOCATABLE :: tnames(:) #endif CHARACTER(LEN=2) :: suff(9) !--- Suffixes for schemes of order 3 or 4 (Prather) CHARACTER(LEN=3) :: descrq(30) !--- Advection scheme description tags CHARACTER(LEN=maxlen) :: msg1, texp, ttp !--- Strings for messages and expanded tracers type INTEGER :: fType !--- Tracers description file type ; 0: none !--- 1/2/3: "traceur.def"/"tracer.def"/"tracer_*.def" INTEGER :: nqtrue !--- Tracers nb from tracer.def (no higher order moments) INTEGER :: iad !--- Advection scheme number INTEGER :: iq, jq, nt, im, nm !--- Indexes and temporary variables LOGICAL :: lerr, lInit TYPE(trac_type), ALLOCATABLE, TARGET :: ttr(:) TYPE(trac_type), POINTER :: t1, t(:) CHARACTER(LEN=maxlen), ALLOCATABLE :: types_trac(:) !--- Keywords for tracers type(s), parsed version CHARACTER(LEN=*), PARAMETER :: modname="init_infotrac_phy" !------------------------------------------------------------------------------------------------------------------------------ ! Initialization : !------------------------------------------------------------------------------------------------------------------------------ suff = ['x ','y ','z ','xx','xy','xz','yy','yz','zz'] descrq( 1:30) = ' ' descrq( 1: 2) = ['LMV','BAK'] descrq(10:20) = ['VL1','VLP','FH1','FH2','VLH',' ','PPM','PPS','PPP',' ','SLP'] descrq(30) = 'PRA' CALL getin_p('type_trac',type_trac) CALL msg('type_trac = "'//TRIM(type_trac)//'"', modname, is_master) IF(strCount(type_trac, '|', nt)) CALL abort_physic(modname, 'Could''nt parse the "type_trac" string with delimiter "|"', 1) IF(nt >= 3) CALL abort_physic(modname, 'you need to modify type_trac, this version is not supported by lmdz', 1) IF(strParse(type_trac, '|', types_trac, n=nt)) CALL abort_physic(modname, "couldn't parse "//'"type_trac"', 1) IF(nt == 2) type_trac = types_trac(2) ! TO BE DELETED SOON CALL msg('type_trac = "'//TRIM(type_trac)//'"', modname) lInit = .NOT.ALLOCATED(tracers) !############################################################################################################################## IF(lInit .AND. is_master) THEN !=== SKIPED IF ALREADY DONE !############################################################################################################################## !--- MESSAGE ABOUT THE CHOSEN CONFIGURATION msg1 = 'For type_trac = "'//TRIM(type_trac)//'":' SELECT CASE(type_trac) CASE('inca'); CALL msg(TRIM(msg1)//' coupling with INCA chemistry model', modname) CASE('inco'); CALL msg(TRIM(msg1)//' coupling jointly with INCA and CO2 cycle', modname) CASE('repr'); CALL msg(TRIM(msg1)//' coupling with REPROBUS chemistry model', modname) CASE('co2i'); CALL msg(TRIM(msg1)//' you have chosen to run with CO2 cycle', modname) CASE('coag'); CALL msg(TRIM(msg1)//' tracers are treated for COAGULATION tests', modname) CASE('lmdz'); CALL msg(TRIM(msg1)//' tracers are treated in LMDZ only', modname) CASE DEFAULT; CALL abort_physic(modname,'type_trac='//TRIM(type_trac)//' not possible yet.',1) END SELECT !--- COHERENCE TEST BETWEEN "type_trac" AND PREPROCESSING KEYS SELECT CASE(type_trac) CASE('inca', 'inco') #ifndef INCA CALL abort_physic(modname, 'You must add cpp key INCA and compile with INCA code', 1) #endif CASE('repr') #ifndef REPROBUS CALL abort_physic(modname, 'You must add cpp key REPROBUS and compile with REPROBUS code', 1) #endif CASE('coag') #ifndef CPP_StratAer CALL abort_physic(modname, 'You must add cpp key StratAer and compile with StratAer code', 1) #endif END SELECT !############################################################################################################################## END IF !############################################################################################################################## !============================================================================================================================== ! 0) DETERMINE THE TYPE OF THE INPUT TRACERS DESCRIPTION FILE AND READ IT !============================================================================================================================== texp = type_trac !=== EXPANDED (WITH "|" SEPARATOR) "type_trac" IF(texp == 'inco') texp = 'co2i|inca' IF(texp /= 'lmdz') texp = 'lmdz|'//TRIM(texp) IF(testTracersFiles(modname, texp, fType, lInit.AND.is_master)) CALL abort_physic(modname, 'problem with tracers file(s)',1) ttp = type_trac; IF(fType /= 1) ttp = texp !--------------------------------------------------------------------------------------------------------------------------- IF(fType == 0) CALL abort_physic(modname, 'Missing "traceur.def", "tracer.def" or "tracer_.def tracers file.',1) !--------------------------------------------------------------------------------------------------------------------------- IF(fType == 1 .AND. ANY(['inca', 'inco'] == type_trac)) & !=== FOUND OLD STYLE INCA "traceur.def" CALL abort_physic(modname, 'retro-compatibility with old-style INCA traceur.def files has been disabled.', 1) !--------------------------------------------------------------------------------------------------------------------------- !############################################################################################################################## IF(lInit) THEN IF(readTracersFiles(ttp, lRepr=type_trac == 'repr')) CALL abort_physic(modname, 'problem with tracers file(s)',1) END IF CALL msg('No tracers description file(s) reading needed: already done', modname, .NOT.lInit.AND.is_master) !############################################################################################################################## !============================================================================================================================== ! 1) Get various numbers: "nqtrue" (first order only tracers), "nqo" (water phases), 'nbtr' (tracers passed to physics), etc. !============================================================================================================================== nqtrue = SIZE(tracers) !--- "true" tracers nqo = COUNT(tracers(:)%component == 'lmdz' .AND. delPhase(tracers(:)%name) == 'H2O') !--- Water phases nbtr = nqtrue-COUNT(tracers(:)%component == 'lmdz' .AND. delPhase(tracers(:)%gen0Name) == 'H2O') !--- Passed to phytrac nqCO2 = COUNT( [type_trac == 'inco', type_trac == 'co2i'] ) #ifdef INCA nqINCA = COUNT(tracers(:)%component == 'inca') #endif #ifdef REPROBUS CALL Init_chem_rep_trac(nbtr, nqo, tracers(:)%name) !--- Transfert the number of tracers to Reprobus #endif !############################################################################################################################## IF(lInit) THEN !=== SKIPED IF ALREADY DONE IN dyn3d_common/infotrac #### !############################################################################################################################## !============================================================================================================================== ! 2) Calculate nqtot, number of tracers needed (greater if advection schemes 20 or 30 have been chosen). !============================================================================================================================== IF(getKey('hadv', hadv, ky=tracers(:)%keys)) CALL abort_physic(modname, 'missing key "hadv"', 1) IF(getKey('vadv', vadv, ky=tracers(:)%keys)) CALL abort_physic(modname, 'missing key "vadv"', 1) DO iq = 1, nqtrue IF( hadv(iq)<20 .OR. (ANY(hadv(iq)==[20,30]) .AND. hadv(iq)==vadv(iq)) ) CYCLE WRITE(msg1,'("The choice hadv=",i0,", vadv=",i0,a)')hadv(iq),vadv(iq),' for "'//TRIM(tracers(iq)%name)//'" is not available' CALL abort_physic(modname, TRIM(msg1), 1) END DO nqtot = COUNT( hadv< 20 .AND. vadv< 20 ) & !--- No additional tracer + 4*COUNT( hadv==20 .AND. vadv==20 ) & !--- 3 additional tracers + 10*COUNT( hadv==30 .AND. vadv==30 ) !--- 9 additional tracers !--- More tracers due to the choice of advection scheme => assign total number of tracers IF( nqtot /= nqtrue ) THEN CALL msg('The choice of advection scheme for one or more tracers makes it necessary to add tracers') CALL msg('The number of true tracers is '//TRIM(int2str(nqtrue))) CALL msg('The total number of tracers needed is '//TRIM(int2str(nqtot))) END IF !============================================================================================================================== ! 3) Determine the advection scheme ; needed to compute the full tracers list, the long names, nqtot and %isAdvected !============================================================================================================================== ALLOCATE(ttr(nqtot)) jq = nqtrue+1; tracers(:)%iadv = -1 DO iq = 1, nqtrue t1 => tracers(iq) !--- VERIFY THE CHOICE OF ADVECTION SCHEME iad = -1 IF(hadv(iq) == vadv(iq) ) iad = hadv(iq) IF(hadv(iq)==10 .AND. vadv(iq)==16) iad = 11 WRITE(msg1,'("Bad choice of advection scheme for ",a,": hadv = ",i0,", vadv = ",i0)')TRIM(t1%name), hadv(iq), vadv(iq) IF(iad == -1) CALL abort_physic(modname, msg1, 1) !--- SET FIELDS longName, isAdvected, isInPhysics t1%longName = t1%name; IF(iad > 0) t1%longName=TRIM(t1%name)//descrq(iad) t1%isAdvected = iad >= 0 t1%isInPhysics= delPhase(t1%gen0Name) /= 'H2O' .OR. t1%component /= 'lmdz' !=== MORE EXCEPTIONS ? CO2i, SURSAT CLOUD H2O ttr(iq) = t1 !--- DEFINE THE HIGHER ORDER TRACERS, IF ANY nm = 0 IF(iad == 20) nm = 3 !--- 2nd order scheme IF(iad == 30) nm = 9 !--- 3rd order scheme IF(nm == 0) CYCLE !--- No higher moments ttr(jq+1:jq+nm) = t1 ttr(jq+1:jq+nm)%name = [ (TRIM(t1%name) //'-'//TRIM(suff(im)), im=1, nm) ] ttr(jq+1:jq+nm)%gen0Name = [ (TRIM(t1%name) //'-'//TRIM(suff(im)), im=1, nm) ] ttr(jq+1:jq+nm)%parent = [ (TRIM(t1%parent) //'-'//TRIM(suff(im)), im=1, nm) ] ttr(jq+1:jq+nm)%longName = [ (TRIM(t1%longName)//'-'//TRIM(suff(im)), im=1, nm) ] ttr(jq+1:jq+nm)%isAdvected = [ (.FALSE., im=1, nm) ] ttr(jq+1:jq+nm)%isInPhysics = [ (.FALSE., im=1, nm) ] jq = jq + nm END DO DEALLOCATE(hadv, vadv) CALL MOVE_ALLOC(FROM=ttr, TO=tracers) !--- SET FIELDS iqParent, iqDescen, nqDescen, nqChildren, iGeneration IF(indexUpdate(tracers)) CALL abort_physic(modname, 'problem with tracers indices update', 1) !############################################################################################################################## END IF !############################################################################################################################## !############################################################################################################################## IF(.NOT.lInit) THEN !############################################################################################################################## nqtot = SIZE(tracers) !############################################################################################################################## ELSE !############################################################################################################################## !=== READ PHYSICAL PARAMETERS FOR ISOTOPES niso = 0; nzone = 0; nphas = nqo; ntiso = 0; isoCheck = .FALSE. IF(processIsotopes()) CALL abort_physic(modname, 'Problem when processing isotopes parameters', 1) !############################################################################################################################## END IF !############################################################################################################################## !--- Convection / boundary layer activation for all tracers IF(.NOT.ALLOCATED(conv_flg)) ALLOCATE(conv_flg(nbtr)); conv_flg(1:nbtr) = 1 IF(.NOT.ALLOCATED( pbl_flg)) ALLOCATE( pbl_flg(nbtr)); pbl_flg(1:nbtr) = 1 !--- Note: nqtottr can differ from nbtr when nmom/=0 nqtottr = nqtot - COUNT(delPhase(tracers%gen0Name) == 'H2O' .AND. tracers%component == 'lmdz') IF(COUNT(tracers%iso_iName == 0) - COUNT(delPhase(tracers%name) == 'H2O' .AND. tracers%component == 'lmdz') /= nqtottr) & CALL abort_physic(modname, 'problem with the computation of nqtottr', 1) !=== DISPLAY THE RESULTS IF(.NOT.is_master) RETURN CALL msg('nqo = '//TRIM(int2str(nqo)), modname) CALL msg('nbtr = '//TRIM(int2str(nbtr)), modname) CALL msg('nqtrue = '//TRIM(int2str(nqtrue)), modname) CALL msg('nqtot = '//TRIM(int2str(nqtot)), modname) CALL msg('niso = '//TRIM(int2str(niso)), modname) CALL msg('ntiso = '//TRIM(int2str(ntiso)), modname) #ifdef INCA CALL msg('nqCO2 = '//TRIM(int2str(nqCO2)), modname) CALL msg('nqINCA = '//TRIM(int2str(nqINCA)), modname) #endif t => tracers CALL msg('Information stored in '//TRIM(modname)//': ', modname) IF(dispTable('isssssssssiiiiiiii', ['iq ', 'name', 'lNam', 'g0Nm', 'prnt', 'type', 'phas', 'comp', & 'isPh', 'isAd', 'iGen', 'iqPr', 'nqDe', 'nqCh', 'iGrp', 'iNam', 'iZon', 'iPha'], & cat(t%name, t%longName, t%gen0Name, t%parent, t%type, t%phase, t%component, & bool2str(t%isInPhysics), bool2str(t%isAdvected)), & cat([(iq, iq=1, nqtot)], t%iGeneration, t%iqParent, t%nqDescen, t%nqChildren, t%iso_iGroup, & t%iso_iName, t%iso_iZone, t%iso_iPhase), nColMax=maxTableWidth, nHead=2, sub=modname)) & CALL abort_physic(modname, "problem with the tracers table content", 1) CALL msg('No isotopes identified.', modname, nbIso == 0) IF(nbIso == 0) RETURN CALL msg('For isotopes family "H2O":', modname) CALL msg(' isoKeys%name = '//strStack(isoKeys%name), modname) CALL msg(' isoName = '//strStack(isoName), modname) CALL msg(' isoZone = '//strStack(isoZone), modname) CALL msg(' isoPhas = '// TRIM(isoPhas), modname) #ifdef ISOVERIF CALL msg('iso_iName = '//strStack(int2str(PACK(tracers(:)%iso_iName, MASK=tracers(:)%iso_iGroup==iH2O))), modname) #endif #ifdef CPP_StratAer IF (type_trac == 'coag') THEN nbtr_bin = COUNT([(tracers(iq)%name(1:3)=='BIN', iq=1, nqtot)]) nbtr_sulgas = COUNT([(tracers(iq)%name(1:3)=='GAS', iq=1, nqtot)]) tnames = PACK(tracers(:)%name, MASK=tracers(:)%isInPhysics) id_BIN01_strat = strIdx(tnames, 'BIN01' ) id_OCS_strat = strIdx(tnames, 'GASOCS' ) id_SO2_strat = strIdx(tnames, 'GASSO2' ) id_H2SO4_strat = strIdx(tnames, 'GASH2SO4') id_TEST_strat = strIdx(tnames, 'GASTEST' ) CALL msg('nbtr_bin ='//TRIM(int2str(nbtr_bin )), modname) CALL msg('nbtr_sulgas ='//TRIM(int2str(nbtr_sulgas )), modname) CALL msg('id_BIN01_strat ='//TRIM(int2str(id_BIN01_strat)), modname) CALL msg('id_OCS_strat ='//TRIM(int2str(id_OCS_strat )), modname) CALL msg('id_SO2_strat ='//TRIM(int2str(id_SO2_strat )), modname) CALL msg('id_H2SO4_strat ='//TRIM(int2str(id_H2SO4_strat)), modname) CALL msg('id_TEST_strat ='//TRIM(int2str(id_TEST_strat )), modname) END IF #endif END SUBROUTINE init_infotrac_phy END MODULE infotrac_phy