PROGRAM ce0l !------------------------------------------------------------------------------- ! Purpose: Initial states and boundary conditions files creation: ! * start.nc for dynamics (using etat0dyn routine) ! * startphy.nc for physics (using etat0phys routine) ! * limit.nc for forced runs (using limit_netcdf routine) !------------------------------------------------------------------------------- ! Notes: ! * extrap=.T. (default) for data extrapolation, like for the SSTs when file ! does contain ocean points only. ! * "masque" can be: ! - read from file "o2a.nc" (for coupled runs). ! - read from file "startphy0.nc" (from a previous run). ! - created in etat0phys or etat0dyn (for forced runs). ! It is then passed to limit_netcdf to ensure consistancy. !------------------------------------------------------------------------------- USE ioipsl, ONLY: ioconf_calendar, getin, flininfo, flinopen, flinget, flinclo USE control_mod, ONLY: day_step, dayref, nsplit_phys USE etat0dyn, ONLY: etat0dyn_netcdf USE etat0phys, ONLY: etat0phys_netcdf USE limit, ONLY: limit_netcdf USE netcdf, ONLY: nf90_open, nf90_nowrite, nf90_close, nf90_noerr, & nf90_inquire_dimension, nf90_inq_dimid, nf90_inq_varid, nf90_get_var USE lmdz_infotrac, ONLY: init_infotrac USE dimphy, ONLY: klon USE test_disvert_m, ONLY: test_disvert USE lmdz_filtreg, ONLY: inifilr USE iniphysiq_mod, ONLY: iniphysiq USE mod_const_mpi, ONLY: comm_lmdz #ifdef CPP_PARA USE mod_const_mpi, ONLY: init_const_mpi USE parallel_lmdz, ONLY: init_parallel, mpi_rank, omp_rank, using_mpi USE bands, ONLY: read_distrib, distrib_phys USE mod_hallo, ONLY: init_mod_hallo USE mod_interface_dyn_phys, ONLY: init_interface_dyn_phys USE lmdz_xios, ONLY: using_xios, xios_finalize #endif USE comconst_mod, ONLY: cpp, daysec, dtphys, dtvr, g, kappa, omeg, r, rad, & pi, jmp1 USE logic_mod, ONLY: iflag_phys, ok_etat0, ok_limit USE comvert_mod, ONLY: pa, preff, pressure_exner USE temps_mod, ONLY: calend, day_ini, dt USE lmdz_mpi USE lmdz_iniprint, ONLY: lunout, prt_level USE lmdz_comgeom2 USE lmdz_dimensions, ONLY: iim, jjm, llm, ndm USE lmdz_paramet USE lmdz_conf_gcm, ONLY: conf_gcm IMPLICIT NONE !------------------------------------------------------------------------------- ! Local variables: REAL :: masque(iip1, jjp1) !--- CONTINENTAL MASK REAL :: phis (iip1, jjp1) !--- GROUND GEOPOTENTIAL CHARACTER(LEN = 256) :: modname, fmt, calnd !--- CALENDAR TYPE LOGICAL :: use_filtre_fft LOGICAL, PARAMETER :: extrap = .FALSE. !--- Local variables for ocean mask reading: INTEGER :: nid_o2a, iml_omask, jml_omask, j INTEGER :: fid, iret, llm_tmp, ttm_tmp, itaul(1) REAL, ALLOCATABLE :: lon_omask(:, :), dlon_omask(:), ocemask(:, :) REAL, ALLOCATABLE :: lat_omask(:, :), dlat_omask(:), ocetmp (:, :) REAL :: date, lev(1) !--- Local variables for land mask from startphy0 file reading INTEGER :: nid_sta, nid_nph, nid_msk, nphys REAL, ALLOCATABLE :: masktmp(:) #ifdef CPP_PARA INTEGER ierr #else ! for iniphysiq in serial mode INTEGER, PARAMETER :: mpi_rank = 0 INTEGER :: distrib_phys(mpi_rank:mpi_rank) = (jjm - 1) * iim + 2 #endif !------------------------------------------------------------------------------- modname = "ce0l" !--- Constants pi = 4. * ATAN(1.) rad = 6371229. daysec = 86400. omeg = 2. * pi / daysec g = 9.8 kappa = 0.2857143 cpp = 1004.70885 jmp1 = jjm + 1 preff = 101325. pa = 50000. CALL conf_gcm(99, .TRUE.) dtvr = daysec / REAL(day_step) WRITE(lunout, *)'dtvr', dtvr CALL iniconst() CALL inigeom() !--- Calendar choice calnd = 'gregorian' SELECT CASE(calend) CASE('earth_360d');CALL ioconf_calendar('360_day'); calnd = 'with 360 days/year' CASE('earth_365d');CALL ioconf_calendar('noleap'); calnd = 'with no leap year' CASE('earth_366d');CALL ioconf_calendar('366d'); calnd = 'with leap years only' CASE('gregorian'); CALL ioconf_calendar('gregorian') CASE('standard'); CALL ioconf_calendar('gregorian') CASE('julian'); CALL ioconf_calendar('julian'); calnd = 'julian' CASE('proleptic_gregorian'); CALL ioconf_calendar('gregorian') !--- DC Bof... => IOIPSL a mettre a jour: proleptic_gregorian /= gregorian CASE DEFAULT CALL abort_gcm('ce0l', 'Bad choice for calendar', 1) END SELECT WRITE(lunout, *)'CHOSEN CALENDAR: Earth ' // TRIM(calnd) #ifdef CPP_PARA !--- Physical grid + parallel initializations CALL init_const_mpi() CALL init_parallel() CALL read_distrib() CALL init_mod_hallo() #endif WRITE(lunout, *)'---> klon=', klon !--- Tracers initializations CALL init_infotrac() CALL inifilr() CALL iniphysiq(iim, jjm, llm, & distrib_phys(mpi_rank), comm_lmdz, & daysec, day_ini, dtphys / nsplit_phys, & rlatu, rlatv, rlonu, rlonv, aire, cu, cv, rad, g, r, cpp, iflag_phys) IF(pressure_exner) CALL test_disvert #ifdef CPP_PARA IF (mpi_rank==0.AND.omp_rank==0) THEN #endif use_filtre_fft = .FALSE. CALL getin('use_filtre_fft', use_filtre_fft) IF(use_filtre_fft) THEN WRITE(lunout, *)"FFT filter not available for sequential dynamics." WRITE(lunout, *)"Your setting of variable use_filtre_fft is not used." ENDIF !--- LAND MASK. THREE CASES: ! 1) read from ocean model file "o2a.nc" (coupled runs) ! 2) read from previous run file="startphy0.nc" ! 3) computed from topography file "Relief.nc" (masque(:,:)=-99999.) ! In the first case, the mask from the ocean model is used compute the ! weights to ensure ocean fractions are the same for atmosphere and ocean. !******************************************************************************* IF(nf90_open("o2a.nc", nf90_nowrite, nid_o2a)==nf90_noerr) THEN iret = nf90_close(nid_o2a) WRITE(lunout, *)'BEWARE !! Ocean mask "o2a.nc" file found' WRITE(lunout, *)'Coupled run.' CALL flininfo("o2a.nc", iml_omask, jml_omask, llm_tmp, ttm_tmp, nid_o2a) IF(iml_omask/=iim .OR.jml_omask/=jjp1) THEN WRITE(lunout, *)'Mismatching dimensions for ocean mask' WRITE(lunout, *)'iim = ', iim, ' iml_omask = ', iml_omask WRITE(lunout, *)'jjp1 = ', jjp1, ' jml_omask = ', jml_omask CALL abort_gcm(modname, '', 1) END IF ALLOCATE(ocemask(iim, jjp1), lon_omask(iim, jjp1), dlon_omask(iim)) ALLOCATE(ocetmp (iim, jjp1), lat_omask(iim, jjp1), dlat_omask(jjp1)) CALL flinopen("o2a.nc", .FALSE., iml_omask, jml_omask, llm_tmp, & lon_omask, lat_omask, lev, ttm_tmp, itaul, date, dt, fid) CALL flinget(fid, "OceMask", iim, jjp1, llm_tmp, ttm_tmp, 1, 1, ocetmp) CALL flinclo(fid) dlon_omask(1:iim) = lon_omask(1:iim, 1) dlat_omask(1:jjp1) = lat_omask(1, 1:jjp1) ocemask = ocetmp IF(dlat_omask(1)=1) THEN WRITE(fmt, "(i4,'i1)')")iim ; fmt = '(' // ADJUSTL(fmt) WRITE(lunout, *)'OCEAN MASK :' WRITE(lunout, fmt) NINT(ocemask) END IF masque(1:iim, :) = 1. - ocemask(:, :) masque(iip1, :) = masque(1, :) DEALLOCATE(ocemask) ELSE IF(nf90_open("startphy0.nc", nf90_nowrite, nid_sta)==nf90_noerr) THEN WRITE(lunout, *)'BEWARE !! File "startphy0.nc" found.' WRITE(lunout, *)'Getting the land mask from a previous run.' iret = nf90_inq_dimid(nid_sta, 'points_physiques', nid_nph) iret = nf90_inquire_dimension(nid_sta, nid_nph, len = nphys) IF(nphys/=klon) THEN WRITE(lunout, *)'Mismatching dimensions for land mask' WRITE(lunout, *)'nphys = ', nphys, ' klon = ', klon iret = nf90_close(nid_sta) CALL abort_gcm(modname, '', 1) END IF ALLOCATE(masktmp(klon)) iret = nf90_inq_varid(nid_sta, 'masque', nid_msk) iret = nf90_get_var(nid_sta, nid_msk, masktmp) iret = nf90_close(nid_sta) CALL gr_fi_dyn(1, klon, iip1, jjp1, masktmp, masque) IF(prt_level>=1) THEN WRITE(fmt, "(i4,'i1)')")iip1 ; fmt = '(' // ADJUSTL(fmt) WRITE(lunout, *)'LAND MASK :' WRITE(lunout, fmt) NINT(masque) END IF DEALLOCATE(masktmp) ELSE WRITE(lunout, *)'BEWARE !! No ocean mask "o2a.nc" file or "startphy0.nc" file found' WRITE(lunout, *)'Land mask will be built from the topography file.' masque(:, :) = -99999. END IF phis(:, :) = -99999. IF(ok_etat0) THEN WRITE(lunout, '(//)') WRITE(lunout, *) ' ************************ ' WRITE(lunout, *) ' *** etat0phy_netcdf *** ' WRITE(lunout, *) ' ************************ ' CALL etat0phys_netcdf(masque, phis) WRITE(lunout, '(//)') WRITE(lunout, *) ' ************************ ' WRITE(lunout, *) ' *** etat0dyn_netcdf *** ' WRITE(lunout, *) ' ************************ ' CALL etat0dyn_netcdf(masque, phis) END IF IF(ok_limit) THEN WRITE(lunout, '(//)') WRITE(lunout, *) ' ********************* ' WRITE(lunout, *) ' *** Limit_netcdf *** ' WRITE(lunout, *) ' ********************* ' WRITE(lunout, '(//)') CALL limit_netcdf(masque, phis, extrap) END IF WRITE(lunout, '(//)') WRITE(lunout, *) ' *************************** ' WRITE(lunout, *) ' *** grilles_gcm_netcdf *** ' WRITE(lunout, *) ' *************************** ' WRITE(lunout, '(//)') CALL grilles_gcm_netcdf_sub(masque, phis) #ifdef CPP_PARA END IF IF (using_xios) CALL xios_finalize IF (using_mpi) CALL MPI_FINALIZE(ierr) #endif END PROGRAM ce0l !-------------------------------------------------------------------------------