SUBROUTINE cv3p2_closure(nloc, ncum, nd, icb, inb, pbase, plcl, p, ph, tv, & tvp, buoy, supmax, ok_inhib, ale, alp, omega,sig, w0, ptop2, cape, cin, m, & iflag, coef, plim1, plim2, asupmax, supmax0, asupmaxmin, cbmflast, plfc, & wbeff) ! ************************************************************** ! * ! CV3P2_CLOSURE * ! Ale & Alp Closure of Convect3 * ! * ! written by : Kerry Emanuel * ! vectorization: S. Bony * ! modified by : Jean-Yves Grandpeix, 18/06/2003, 19.32.10 * ! Julie Frohwirth, 14/10/2005 17.44.22 * ! ************************************************************** USE lmdz_print_control, ONLY: prt_level, lunout USE lmdz_abort_physic, ONLY: abort_physic IMPLICIT NONE include "cvthermo.h" include "cv3param.h" include "cvflag.h" include "YOMCST2.h" include "YOMCST.h" include "conema3.h" ! input: INTEGER, INTENT (IN) :: ncum, nd, nloc INTEGER, DIMENSION (nloc), INTENT (IN) :: icb, inb REAL, DIMENSION (nloc), INTENT (IN) :: pbase, plcl REAL, DIMENSION (nloc, nd), INTENT (IN) :: p REAL, DIMENSION (nloc, nd+1), INTENT (IN) :: ph REAL, DIMENSION (nloc, nd), INTENT (IN) :: tv, tvp, buoy REAL, DIMENSION (nloc, nd), INTENT (IN) :: supmax LOGICAL, INTENT (IN) :: ok_inhib ! enable convection inhibition by dryness REAL, DIMENSION (nloc), INTENT (IN) :: ale, alp REAL, DIMENSION (nloc, nd), INTENT (IN) :: omega ! input/output: INTEGER, DIMENSION (nloc), INTENT (INOUT) :: iflag REAL, DIMENSION (nloc, nd), INTENT (INOUT) :: sig, w0 REAL, DIMENSION (nloc), INTENT (INOUT) :: ptop2 ! output: REAL, DIMENSION (nloc), INTENT (OUT) :: cape, cin REAL, DIMENSION (nloc, nd), INTENT (OUT) :: m REAL, DIMENSION (nloc), INTENT (OUT) :: plim1, plim2 REAL, DIMENSION (nloc, nd), INTENT (OUT) :: asupmax REAL, DIMENSION (nloc), INTENT (OUT) :: supmax0 REAL, DIMENSION (nloc), INTENT (OUT) :: asupmaxmin REAL, DIMENSION (nloc), INTENT (OUT) :: cbmflast, plfc REAL, DIMENSION (nloc), INTENT (OUT) :: wbeff ! local variables: INTEGER :: il, i, j, k, icbmax INTEGER, DIMENSION (nloc) :: i0, klfc REAL :: deltap, fac, w, amu REAL, DIMENSION (nloc, nd) :: rhodp ! Factor such that m=rhodp*sig*w REAL :: dz REAL :: pbmxup REAL, DIMENSION (nloc, nd) :: dtmin, sigold REAL, DIMENSION (nloc, nd) :: coefmix REAL, DIMENSION (nloc) :: dtminmax REAL, DIMENSION (nloc) :: pzero, ptop2old REAL, DIMENSION (nloc) :: cina, cinb INTEGER, DIMENSION (nloc) :: ibeg INTEGER, DIMENSION (nloc) :: nsupmax REAL :: supcrit REAL, DIMENSION (nloc, nd) :: temp REAL, DIMENSION (nloc) :: p1, pmin REAL, DIMENSION (nloc) :: asupmax0 LOGICAL, DIMENSION (nloc) :: ok REAL, DIMENSION (nloc, nd) :: siglim, wlim, mlim REAL, DIMENSION (nloc) :: wb2 REAL, DIMENSION (nloc) :: cbmf0 ! initial cloud base mass flux REAL, DIMENSION (nloc) :: cbmflim ! cbmf given by Cape closure REAL, DIMENSION (nloc) :: cbmfalp ! cbmf given by Alp closure REAL, DIMENSION (nloc) :: cbmfalpb ! bounded cbmf given by Alp closure REAL, DIMENSION (nloc) :: cbmfmax ! upper bound on cbmf REAL, DIMENSION (nloc) :: coef REAL, DIMENSION (nloc) :: xp, xq, xr, discr, b3, b4 REAL, DIMENSION (nloc) :: theta, bb REAL :: term1, term2, term3 REAL, DIMENSION (nloc) :: alp2 ! Alp with offset !CR: variables for new erosion of adiabiatic ascent REAL, DIMENSION (nloc, nd) :: mad, me, betalim, beta_coef REAL, DIMENSION (nloc, nd) :: med, md !jyg< ! coef_peel is now in the common cv3_param !! REAL :: coef_peel !! PARAMETER (coef_peel=0.25) !>jyg REAL :: sigmax PARAMETER (sigmax=0.1) !! PARAMETER (sigmax=10.) CHARACTER (LEN=20) :: modname = 'cv3p2_closure' CHARACTER (LEN=80) :: abort_message INTEGER,SAVE :: igout=1 !$OMP THREADPRIVATE(igout) IF (prt_level>=20) print *,' -> cv3p2_closure, Ale ',ale(igout) ! ------------------------------------------------------- ! -- Initialization ! ------------------------------------------------------- DO il = 1, ncum alp2(il) = max(alp(il), 1.E-5) ! IM alp2(il) = max(alp(il), 1.E-12) END DO pbmxup = 50. ! PBMXUP+PBCRIT = cloud depth above which mixed updraughts ! exist (if any) IF (prt_level>=20) PRINT *, 'cv3p2_closure nloc ncum nd icb inb nl', nloc, & ncum, nd, icb(nloc), inb(nloc), nl DO k = 1, nl DO il = 1, ncum rhodp(il,k) = 0.007*p(il, k)*(ph(il,k)-ph(il,k+1))/tv(il, k) END DO END DO !CR+jyg: initializations (up to nd) for erosion of adiabatic ascent and of m and wlim DO k = 1,nd DO il = 1, ncum mad(il,k)=0. me(il,k)=0. betalim(il,k)=1. wlim(il,k)=0. m(il, k) = 0.0 ENDDO ENDDO ! ------------------------------------------------------- ! -- Reset sig(i) and w0(i) for i>inb and i=(inb(il)+1))) THEN sig(il, k) = beta*sig(il, k) + 2.*alpha*buoy(il, inb(il))*abs(buoy(il,inb(il))) sig(il, k) = amax1(sig(il,k), 0.0) w0(il, k) = beta*w0(il, k) END IF END DO END DO ! IF(prt.level.GE.20) PRINT*,'cv3p2_closure apres 100' ! compute icbmax: icbmax = 2 DO il = 1, ncum icbmax = max(icbmax, icb(il)) END DO ! IF(prt.level.GE.20) PRINT*,'cv3p2_closure apres 200' ! update sig and w0 below cloud base: DO k = 1, icbmax DO il = 1, ncum IF (k<=icb(il)) THEN sig(il, k) = beta*sig(il, k) - 2.*alpha*buoy(il, icb(il))*buoy(il,icb(il)) sig(il, k) = amax1(sig(il,k), 0.0) w0(il, k) = beta*w0(il, k) END IF END DO END DO IF (prt_level>=20) PRINT *, 'cv3p2_closure apres 300' ! ------------------------------------------------------------- ! -- Reset fractional areas of updrafts and w0 at initial time ! -- and after 10 time steps of no convection ! ------------------------------------------------------------- !jyg< IF (ok_convstop) THEN DO k = 1, nl - 1 DO il = 1, ncum IF (sig(il,nd)<1.5 .OR. sig(il,nd)>noconv_stop) THEN sig(il, k) = 0.0 w0(il, k) = 0.0 END IF END DO END DO ELSE DO k = 1, nl - 1 DO il = 1, ncum IF (sig(il,nd)<1.5 .OR. sig(il,nd)>12.0) THEN sig(il, k) = 0.0 w0(il, k) = 0.0 END IF END DO END DO ENDIF ! (ok_convstop) !>jyg IF (prt_level>=20) PRINT *, 'cv3p2_closure apres 400' ! ------------------------------------------------------- ! -- Compute initial cloud base mass flux (Cbmf0) ! ------------------------------------------------------- DO il = 1, ncum cbmf0(il) = 0.0 END DO DO k = 1, nl DO il = 1, ncum IF (k>=icb(il) .AND. k<=inb(il) & .AND. icb(il)+1<=inb(il)) THEN cbmf0(il) = cbmf0(il) + sig(il, k)*w0(il,k)*rhodp(il,k) END IF END DO END DO ! ------------------------------------------------------------- ! jyg1 ! -- Calculate adiabatic ascent top pressure (ptop) ! ------------------------------------------------------------- ! c 1. Start at first level where precipitations form DO il = 1, ncum pzero(il) = plcl(il) - pbcrit END DO ! c 2. Add offset DO il = 1, ncum pzero(il) = pzero(il) - pbmxup END DO DO il = 1, ncum ptop2old(il) = ptop2(il) END DO DO il = 1, ncum ! CR:c est quoi ce 300?? p1(il) = pzero(il) - 300. END DO ! compute asupmax=abs(supmax) up to lnm+1 DO il = 1, ncum ok(il) = .TRUE. nsupmax(il) = inb(il) END DO DO i = 1, nl DO il = 1, ncum IF (i>icb(il) .AND. i<=inb(il)) THEN IF (p(il,i)<=pzero(il) .AND. supmax(il,i)<0 .AND. ok(il)) THEN nsupmax(il) = i ok(il) = .FALSE. END IF ! end IF (P(i) ... ) END IF ! end IF (icb+1 le i le inb) END DO END DO IF (prt_level>=20) PRINT *, 'cv3p2_closure apres 2.' DO i = 1, nl DO il = 1, ncum asupmax(il, i) = abs(supmax(il,i)) END DO END DO DO il = 1, ncum asupmaxmin(il) = 10. pmin(il) = 100. ! IM ?? asupmax0(il) = 0. END DO ! c 3. Compute in which level is Pzero ! IM bug i0 = 18 DO il = 1, ncum i0(il) = nl END DO DO i = 1, nl DO il = 1, ncum IF (i>icb(il) .AND. i<=inb(il)) THEN IF (p(il,i)<=pzero(il) .AND. p(il,i)>=p1(il)) THEN IF (pzero(il)>p(il,i) .AND. pzero(il)=20) PRINT *, 'cv3p2_closure apres 3.' ! c 4. Compute asupmax at Pzero DO i = 1, nl DO il = 1, ncum IF (i>icb(il) .AND. i<=inb(il)) THEN IF (p(il,i)<=pzero(il) .AND. p(il,i)>=p1(il)) THEN asupmax0(il) = ((pzero(il)-p(il,i0(il)-1))*asupmax(il,i0(il))- & (pzero(il)-p(il,i0(il)))*asupmax(il,i0(il)-1))/(p(il,i0(il))-p(il,i0(il)-1)) END IF END IF END DO END DO DO i = 1, nl DO il = 1, ncum IF (p(il,i)==pzero(il)) THEN asupmax(i, il) = asupmax0(il) END IF END DO END DO IF (prt_level>=20) PRINT *, 'cv3p2_closure apres 4.' ! c 5. Compute asupmaxmin, minimum of asupmax DO i = 1, nl DO il = 1, ncum IF (i>icb(il) .AND. i<=inb(il)) THEN IF (p(il,i)<=pzero(il) .AND. p(il,i)>=p1(il)) THEN IF (asupmax(il,i)=20) THEN PRINT *, 'cv3p2_closure il asupmax0 asupmaxmin', il, asupmax0(il), & asupmaxmin(il), pzero(il), pmin(il) END IF IF (asupmax0(il)=20) PRINT *, 'cv3p2_closure apres 5.' ! Compute Supmax at Pzero DO i = 1, nl DO il = 1, ncum IF (i>icb(il) .AND. i<=inb(il)) THEN IF (p(il,i)<=pzero(il)) THEN supmax0(il) = ((p(il,i)-pzero(il))*asupmax(il,i-1)- & (p(il,i-1)-pzero(il))*asupmax(il,i))/(p(il,i)-p(il,i-1)) GO TO 425 END IF ! end IF (P(i) ... ) END IF ! end IF (icb+1 le i le inb) END DO END DO 425 CONTINUE IF (prt_level>=20) PRINT *, 'cv3p2_closure apres 425.' ! c 6. Calculate ptop2 DO il = 1, ncum IF (asupmaxmin(il)supcrit1 .AND. asupmaxmin(il)supcrit2) THEN ptop2(il) = ph(il, inb(il)) END IF END DO IF (prt_level>=20) PRINT *, 'cv3p2_closure apres 6.' ! c 7. Compute multiplying factor for adiabatic updraught mass flux IF (ok_inhib) THEN DO i = 1, nl DO il = 1, ncum IF (i<=nl) THEN coefmix(il, i) = (min(ptop2(il),ph(il,i))-ph(il,i))/(ph(il,i+1)-ph(il,i)) coefmix(il, i) = min(coefmix(il,i), 1.) END IF END DO END DO ELSE ! when inhibition is not taken into account, coefmix=1 DO i = 1, nl DO il = 1, ncum IF (i<=nl) THEN coefmix(il, i) = 1. END IF END DO END DO END IF ! ok_inhib IF (prt_level>=20) PRINT *, 'cv3p2_closure apres 7.' ! ------------------------------------------------------------------- ! ------------------------------------------------------------------- ! jyg2 ! ========================================================================== ! ------------------------------------------------------------- ! -- Calculate convective inhibition (CIN) ! ------------------------------------------------------------- ! do i=1,nloc ! PRINT*,'avant cine p',pbase(i),plcl(i) ! enddo ! do j=1,nd ! do i=1,nloc ! PRINT*,'avant cine t',tv(i),tvp(i) ! enddo ! enddo CALL cv3_cine(nloc, ncum, nd, icb, inb, pbase, plcl, p, ph, tv, tvp, cina, & cinb, plfc) DO il = 1, ncum cin(il) = cina(il) + cinb(il) END DO IF (prt_level>=20) PRINT *, 'cv3p2_closure after cv3_cine: cina, cinb, cin ', & cina(igout), cinb(igout), cin(igout) ! ------------------------------------------------------------- ! --Update buoyancies to account for Ale ! ------------------------------------------------------------- CALL cv3_buoy(nloc, ncum, nd, icb, inb, pbase, plcl, p, ph, ale, cin, tv, & tvp, buoy) IF (prt_level>=20) PRINT *, 'cv3p2_closure after cv3_buoy' ! ------------------------------------------------------------- ! -- Calculate convective available potential energy (cape), ! -- vertical velocity (w), fractional area covered by ! -- undilute updraft (sig), and updraft mass flux (m) ! ------------------------------------------------------------- DO il = 1, ncum cape(il) = 0.0 dtminmax(il) = -100. END DO ! compute dtmin (minimum buoyancy between ICB and given level k): DO k = 1, nl DO il = 1, ncum dtmin(il, k) = 100.0 END DO END DO DO k = 1, nl DO j = minorig, nl DO il = 1, ncum IF ((k>=(icb(il)+1)) .AND. (k<=inb(il)) .AND. (j>=icb(il)) & .AND. (j<=(k-1))) THEN dtmin(il, k) = amin1(dtmin(il,k), buoy(il,j)) END IF END DO END DO END DO !jyg< ! Store maximum of dtmin ! C est pas terrible d avoir ce test sur Ale+Cin encore une fois ici. ! A REVOIR ! DO k = 1, nl DO il = 1, ncum IF (k>=(icb(il)+1) .AND. k<=inb(il) .AND. ale(il)+cin(il)>0.) THEN dtminmax(il) = max(dtmin(il,k), dtminmax(il)) ENDIF END DO END DO ! prevent convection when ale+cin <= 0 DO k = 1, nl DO il = 1, ncum IF (k>=(icb(il)+1) .AND. k<=inb(il)) THEN dtmin(il,k) = min(dtmin(il,k), dtminmax(il)) ENDIF END DO END DO !>jyg IF (prt_level >= 20) THEN print *,'cv3p2_closure: dtmin ', (k, dtmin(igout,k), k=1,nl) print *,'cv3p2_closure: dtminmax ', dtminmax(igout) ENDIF ! the interval on which cape is computed starts at pbase : DO k = 1, nl DO il = 1, ncum IF ((k>=(icb(il)+1)) .AND. (k<=inb(il))) THEN IF (iflag_mix_adiab==1) THEN !CR:computation of cape from LCL: keep flag or to modify in all cases? deltap = min(plcl(il), ph(il,k-1)) - min(plcl(il), ph(il,k)) ELSE deltap = min(pbase(il), ph(il,k-1)) - min(pbase(il), ph(il,k)) ENDIF cape(il) = cape(il) + rrd*buoy(il, k-1)*deltap/p(il, k-1) cape(il) = amax1(0.0, cape(il)) sigold(il, k) = sig(il, k) ! jyg Coefficient coefmix limits convection to levels where a ! sufficient ! fraction of mixed draughts are ascending. siglim(il, k) = coefmix(il, k)*alpha1*dtmin(il, k)*abs(dtmin(il,k)) siglim(il, k) = amax1(siglim(il,k), 0.0) siglim(il, k) = amin1(siglim(il,k), 0.01) ! c fac=AMIN1(((dtcrit-dtmin(il,k))/dtcrit),1.0) fac = 1. wlim(il, k) = fac*sqrt(cape(il)) amu = siglim(il, k)*wlim(il, k) !! rhodp(il,k) = 0.007*p(il, k)*(ph(il,k)-ph(il,k+1))/tv(il, k) !cor jyg : computed earlier mlim(il, k) = amu*rhodp(il,k) ! PRINT*, 'siglim ', k,siglim(1,k) END IF END DO END DO IF (prt_level>=20) PRINT *, 'cv3p2_closure apres 600' DO il = 1, ncum ! IM beg IF (prt_level>=20) THEN PRINT *, 'cv3p2_closure il icb mlim ph ph+1 ph+2', il, icb(il), & mlim(il, icb(il)+1), ph(il, icb(il)), ph(il, icb(il)+1), & ph(il, icb(il)+2) END IF IF (icb(il)+1<=inb(il)) THEN ! IM end mlim(il, icb(il)) = 0.5*mlim(il,icb(il)+1)*(ph(il,icb(il))-ph(il,icb(il)+1))/ & (ph(il,icb(il)+1)-ph(il,icb(il)+2)) ! IM beg END IF !(icb(il.le.inb(il))) THEN ! IM end END DO IF (prt_level>=20) PRINT *, 'cv3p2_closure apres 700' ! ------------------------------------------------------------------------ ! c Compute Cloud base mass flux given by Cape closure (cbmflim = cbmf of ! c elementary systems), cbmf given by Alp closure (cbmfalp), cbmf given by Alp ! c closure with an upper bound imposed (cbmfalpb) and cbmf resulting from ! c time integration (cbmflast). ! ------------------------------------------------------------------------ DO il = 1, ncum cbmflim(il) = 0. cbmfalp(il) = 0. cbmfalpb(il) = 0. cbmflast(il) = 0. END DO ! c 1. Compute cloud base mass flux of elementary system (Cbmflim) DO k = 1, nl DO il = 1, ncum ! old IF (k .ge. icb(il) .AND. k .le. inb(il)) THEN ! IM IF (k .ge. icb(il)+1 .AND. k .le. inb(il)) THEN IF (k>=icb(il) .AND. k<=inb(il) & !cor jyg .AND. icb(il)+1<=inb(il)) THEN !cor jyg cbmflim(il) = cbmflim(il) + mlim(il, k) END IF END DO END DO IF (prt_level>=20) PRINT *, 'cv3p2_closure after cbmflim: cbmflim ', cbmflim(igout) ! 1.5 Compute cloud base mass flux given by Alp closure (Cbmfalp), maximum ! allowed mass flux (Cbmfmax) and bounded mass flux (Cbmfalpb) ! Cbmfalpb is set to zero if Cbmflim (the mass flux of elementary cloud) ! is exceedingly small. DO il = 1, ncum wb2(il) = sqrt(2.*max(ale(il)+cin(il),0.)) END DO DO il = 1, ncum IF (plfc(il)<100.) THEN ! This is an irealistic value for plfc => no calculation of wbeff wbeff(il) = 100.1 ELSE ! Calculate wbeff IF (NINT(flag_wb)==0) THEN wbeff(il) = wbmax ELSE IF (NINT(flag_wb)==1) THEN wbeff(il) = wbmax/(1.+500./(ph(il,1)-plfc(il))) ELSE IF (NINT(flag_wb)==2) THEN wbeff(il) = wbmax*(0.01*(ph(il,1)-plfc(il)))**2 END IF END IF END DO !CR:Compute k at plfc DO il=1,ncum klfc(il)=nl ENDDO DO k=1,nl DO il=1,ncum IF ((plfc(il)=ph(il,k+1))) THEN klfc(il)=k endif ENDDO ENDDO !RC DO il = 1, ncum ! jyg Modification du coef de wb*wb pour conformite avec papier Wake ! c cbmfalp(il) = alp2(il)/(0.5*wb*wb-Cin(il)) cbmfalp(il) = alp2(il)/(2.*wbeff(il)*wbeff(il)-cin(il)) !CR: Add large-scale component to the mass-flux !encore connu sous le nom "Experience du tube de dentifrice" IF ((coef_clos_ls>0.).AND.(plfc(il)>0.)) THEN cbmfalp(il) = cbmfalp(il) - coef_clos_ls*min(0.,1./RG*omega(il,klfc(il))) endif !RC IF (cbmfalp(il)==0 .AND. alp2(il)/=0.) THEN WRITE (lunout, *) 'cv3p2_closure cbmfalp=0 and alp NE 0 il alp2 alp cin ' , & il, alp2(il), alp(il), cin(il) abort_message = '' CALL abort_physic(modname, abort_message, 1) END IF cbmfmax(il) = sigmax*wb2(il)*100.*p(il, icb(il))/(rrd*tv(il,icb(il))) END DO !jyg< IF (OK_intermittent) THEN DO il = 1, ncum IF (cbmflim(il)>1.E-6) THEN cbmfalpb(il) = min(cbmfalp(il), (cbmfmax(il)-beta*cbmf0(il))/(1.-beta)) ! PRINT*,'cbmfalpb',cbmfalpb(il),cbmfmax(il) END IF END DO ELSE !>jyg DO il = 1, ncum IF (cbmflim(il)>1.E-6) THEN ! ATTENTION TEST CR ! if (cbmfmax(il).lt.1.e-12) THEN cbmfalpb(il) = min(cbmfalp(il), cbmfmax(il)) ! else ! cbmfalpb(il) = cbmfalp(il) ! END IF ! PRINT*,'cbmfalpb',cbmfalp(il),cbmfmax(il) END IF END DO ENDIF !(OK_intermittent) IF (prt_level>=20) PRINT *, 'cv3p2_closure apres cbmfalpb: cbmfalpb ',cbmfalpb(igout) ! c 2. Compute coefficient and apply correction DO il = 1, ncum coef(il) = (cbmfalpb(il)+1.E-10)/(cbmflim(il)+1.E-10) END DO IF (prt_level>=20) PRINT *, 'cv3p2_closure apres coef_plantePLUS' DO k = 1, nl DO il = 1, ncum IF (k>=icb(il)+1 .AND. k<=inb(il)) THEN amu = beta*sig(il, k)*w0(il, k) + (1.-beta)*coef(il)*siglim(il, k)*wlim(il, k) w0(il, k) = wlim(il, k) w0(il, k) = max(w0(il,k), 1.E-10) sig(il, k) = amu/w0(il, k) sig(il, k) = min(sig(il,k), 1.) ! c amu = 0.5*(SIG(il,k)+sigold(il,k))*W0(il,k) !jyg m(il, k) = amu*0.007*p(il, k)*(ph(il,k)-ph(il,k+1))/tv(il, k) m(il, k) = amu*rhodp(il,k) END IF END DO END DO ! jyg2 DO il = 1, ncum w0(il, icb(il)) = 0.5*w0(il, icb(il)+1) m(il, icb(il)) = 0.5*m(il, icb(il)+1)*(ph(il,icb(il))-ph(il,icb(il)+1))/ & (ph(il,icb(il)+1)-ph(il,icb(il)+2)) sig(il, icb(il)) = sig(il, icb(il)+1) sig(il, icb(il)-1) = sig(il, icb(il)) END DO IF (prt_level>=20) PRINT *, 'cv3p2_closure apres w0_sig_M: w0, sig ', & (k,w0(igout,k),sig(igout,k), k=icb(igout),inb(igout)) !CR: new erosion of adiabatic ascent: modification of m !computation of the sum of ascending fluxes IF (iflag_mix_adiab==1) THEN !Verification sum(me)=sum(m) DO k = 1,nd DO il = 1, ncum md(il,k)=0. med(il,k)=0. ENDDO ENDDO DO k = nl,1,-1 DO il = 1, ncum md(il,k)=md(il,k+1)+m(il,k+1) ENDDO ENDDO DO k = nl,1,-1 DO il = 1, ncum IF ((k>=(icb(il))) .AND. (k<=inb(il))) THEN mad(il,k)=mad(il,k+1)+m(il,k+1) ENDIF ! PRINT*,"mad",il,k,mad(il,k) ENDDO ENDDO !CR: erosion of each adiabatic ascent during its ascent !Computation of erosion coefficient beta_coef DO k = 1, nl DO il = 1, ncum IF ((k>=(icb(il)+1)) .AND. (k<=inb(il)) .AND. (mlim(il,k)>0.)) THEN ! PRINT*,"beta_coef",il,k,icb(il),inb(il),buoy(il,k),tv(il,k),wlim(il,k),wlim(il,k+1) beta_coef(il,k)=RG*coef_peel*buoy(il,k)/tv(il,k)/((wlim(il,k)+wlim(il,k+1))/2.)**2 ELSE beta_coef(il,k)=0. ENDIF ENDDO ENDDO ! PRINT*,"apres beta_coef" DO k = 1, nl DO il = 1, ncum IF ((k>=(icb(il)+1)) .AND. (k<=inb(il))) THEN ! PRINT*,"dz",il,k,tv(il, k-1) dz = (ph(il,k-1)-ph(il,k))/(p(il, k-1)/(rrd*tv(il, k-1))*RG) betalim(il,k)=betalim(il,k-1)*exp(-1.*beta_coef(il,k-1)*dz) ! betalim(il,k)=betalim(il,k-1)*exp(-RG*coef_peel*buoy(il,k-1)/tv(il,k-1)/5.**2*dz) ! PRINT*,"me",il,k,mlim(il,k),buoy(il,k),wlim(il,k),mad(il,k) dz = (ph(il,k)-ph(il,k+1))/(p(il, k)/(rrd*tv(il, k))*RG) ! me(il,k)=betalim(il,k)*(m(il,k)+RG*coef_peel*buoy(il,k)/tv(il,k)/((wlim(il,k)+wlim(il,k+1))/2.)**2*dz*mad(il,k)) me(il,k)=betalim(il,k)*(m(il,k)+beta_coef(il,k)*dz*mad(il,k)) ! PRINT*,"B/w2",il,k,RG*coef_peel*buoy(il,k)/tv(il,k)/((wlim(il,k)+wlim(il,k+1))/2.)**2*dz END IF !Modification of m m(il,k)=me(il,k) END DO END DO ! DO il = 1, ncum ! dz = (ph(il,icb(il))-ph(il,icb(il)+1))/(p(il, icb(il))/(rrd*tv(il, icb(il)))*RG) ! m(il,icb(il))=m(il,icb(il))+RG*coef_peel*buoy(il,icb(il))/tv(il,icb(il)) & ! /((wlim(il,icb(il))+wlim(il,icb(il)+1))/2.)**2*dz*mad(il,icb(il)) ! PRINT*,"wlim(icb)",icb(il),wlim(il,icb(il)),m(il,icb(il)) ! ENDDO !Verification sum(me)=sum(m) DO k = nl,1,-1 DO il = 1, ncum med(il,k)=med(il,k+1)+m(il,k+1) ! PRINT*,"somme(me),somme(m)",il,k,icb(il),med(il,k),md(il,k),me(il,k),m(il,k),wlim(il,k) ENDDO ENDDO ENDIF !(iflag_mix_adiab) !RC ! c 3. Compute final cloud base mass flux; ! c set iflag to 3 if cloud base mass flux is exceedingly small and is ! c decreasing (i.e. if the final mass flux (cbmflast) is greater than ! c the target mass flux (cbmfalpb)). ! c If(ok_convstop): set iflag to 4 if no positive buoyancy has been met !jyg DO il = 1, ncum !jyg cbmflast(il) = 0. !jyg END DO DO k = 1, nl DO il = 1, ncum IF (k>=icb(il) .AND. k<=inb(il)) THEN !IMpropo?? IF ((k.ge.(icb(il)+1)).AND.(k.le.inb(il))) THEN cbmflast(il) = cbmflast(il) + m(il, k) END IF END DO END DO IF (prt_level>=20) PRINT *, 'cv3p2_closure apres cbmflast: cbmflast ',cbmflast(igout) DO il = 1, ncum IF (cbmflast(il)<1.E-6 .AND. cbmflast(il)>=cbmfalpb(il)) THEN iflag(il) = 3 END IF END DO !jyg< IF (ok_convstop) THEN DO il = 1, ncum IF (dtminmax(il) <= 0.) THEN iflag(il) = 4 END IF END DO ELSE !>jyg DO k = 1, nl DO il = 1, ncum IF (iflag(il)>=3) THEN m(il, k) = 0. sig(il, k) = 0. w0(il, k) = 0. END IF END DO END DO ENDIF ! (ok_convstop) IF (prt_level >= 10) THEN print *,'cv3p2_closure: iflag ',iflag(igout) ENDIF ! c 4. Introduce a correcting factor for coef, in order to obtain an ! effective ! c sigdz larger in the present case (using cv3p2_closure) than in the ! old ! c closure (using cv3_closure). IF (1==0) THEN DO il = 1, ncum ! c coef(il) = 2.*coef(il) coef(il) = 5.*coef(il) END DO ! version CVS du ..2008 ELSE IF (iflag_cvl_sigd==0) THEN ! test pour verifier qu on fait la meme chose qu avant: sid constant coef(1:ncum) = 1. ELSE coef(1:ncum) = min(2.*coef(1:ncum), 5.) coef(1:ncum) = max(2.*coef(1:ncum), 0.2) END IF END IF IF (prt_level>=20) PRINT *, 'cv3p2_closure FIN' END SUBROUTINE cv3p2_closure