! Contains "legacy" xer* functions required by some other very old external code

! Amaury (07/24) WTF ??? We have 1000+ lines of code JUST to allow calling xermsg to print some error message !!??
! Get rid of this 🤢

MODULE lmdz_xer
  IMPLICIT NONE; PRIVATE
  PUBLIC xermsg
CONTAINS

  !DECK XERMSG
  SUBROUTINE XERMSG(LIBRAR, SUBROU, MESSG, NERR, LEVEL)
    IMPLICIT NONE
    !***BEGIN PROLOGUE  XERMSG
    !***PURPOSE  Process error messages for SLATEC and other libraries.
    !***LIBRARY   SLATEC (XERROR)
    !***CATEGORY  R3C
    !***TYPE      ALL (XERMSG-A)
    !***KEYWORDS  ERROR MESSAGE, XERROR
    !***AUTHOR  Fong, Kirby, (NMFECC at LLNL)
    !***DESCRIPTION
    !
    !   XERMSG processes a diagnostic message in a manner determined by the
    !   value of LEVEL and the current value of the library error control
    !   flag, KONTRL.  See SUBROUTINE XSETF for details.
    !
    !    LIBRAR   A character constant (or character variable) with the name
    !         of the library.  This will be 'SLATEC' for the SLATEC
    !         Common Math Library.  The error handling package is
    !         general enough to be used by many libraries
    !         simultaneously, so it is desirable for the routine that
    !         detects and reports an error to identify the library name
    !         as well as the routine name.
    !
    !    SUBROU   A character constant (or character variable) with the name
    !             of the routine that detected the error.  Usually it is the
    !         name of the routine that is calling XERMSG.  There are
    !         some instances where a user callable library routine calls
    !         lower level subsidiary routines where the error is
    !         detected.  In such cases it may be more informative to
    !         supply the name of the routine the user called rather than
    !         the name of the subsidiary routine that detected the
    !         error.
    !
    !    MESSG    A character constant (or character variable) with the text
    !         of the error or warning message.  In the example below,
    !         the message is a character constant that contains a
    !         generic message.
    !
    !               CALL XERMSG ('SLATEC', 'MMPY',
    !              *'THE ORDER OF THE MATRIX EXCEEDS THE ROW DIMENSION',
    !              *3, 1)
    !
    !         It is possible (and is sometimes desirable) to generate a
    !         specific message--e.g., one that contains actual numeric
    !         values.  Specific numeric values can be converted into
    !         character strings using formatted WRITE statements into
    !         character variables.  This is called standard Fortran
    !         internal file I/O and is exemplified in the first three
    !         lines of the following example.  You can also catenate
    !         substrings of characters to construct the error message.
    !         Here is an example showing the use of both writing to
    !         an internal file and catenating character strings.
    !
    !               CHARACTER*5 CHARN, CHARL
    !               WRITE (CHARN,10) N
    !               WRITE (CHARL,10) LDA
    !            10 FORMAT(I5)
    !               CALL XERMSG ('SLATEC', 'MMPY', 'THE ORDER'//CHARN//
    !              *   ' OF THE MATRIX EXCEEDS ITS ROW DIMENSION OF'//
    !              *   CHARL, 3, 1)
    !
    !         There are two subtleties worth mentioning.  One is that
    !         the // for character catenation is used to construct the
    !         error message so that no single character constant is
    !         continued to the next line.  This avoids confusion as to
    !         whether there are trailing blanks at the end of the line.
    !         The second is that by catenating the parts of the message
    !             as an actual argument rather than encoding the entire
    !         message into one large character variable, we avoid
    !         having to know how long the message will be in order to
    !         declare an adequate length for that large character
    !         variable.  XERMSG calls XERPRN to print the message using
    !         multiple lines if necessary.  If the message is very long,
    !         XERPRN will break it into pieces of 72 characters (as
    !         requested by XERMSG) for printing on multiple lines.
    !         Also, XERMSG asks XERPRN to prefix each line with ' *  '
    !         so that the total line length could be 76 characters.
    !         Note also that XERPRN scans the error message backwards
    !         to ignore trailing blanks.  Another feature is that
    !         the substring '$$' is treated as a new line sentinel
    !         by XERPRN.  If you want to construct a multiline
    !         message without having to count out multiples of 72
    !         characters, just use '$$' as a separator.  '$$'
    !         obviously must occur within 72 characters of the
    !         start of each line to have its intended effect since
    !         XERPRN is asked to wrap around at 72 characters in
    !         addition to looking for '$$'.
    !
    !    NERR     An integer value that is chosen by the library routine's
    !         author.  It must be in the range -99 to 999 (three
    !         printable digits).  Each distinct error should have its
    !         own error number.  These error numbers should be described
    !         in the machine readable documentation for the routine.
    !         The error numbers need be unique only within each routine,
    !         so it is reasonable for each routine to start enumerating
    !         errors from 1 and proceeding to the next integer.
    !
    !    LEVEL    An integer value in the range 0 to 2 that indicates the
    !         level (severity) of the error.  Their meanings are
    !
    !        -1  A warning message.  This is used if it is not clear
    !            that there really is an error, but the user's attention
    !            may be needed.  An attempt is made to only print this
    !            message once.
    !
    !         0  A warning message.  This is used if it is not clear
    !            that there really is an error, but the user's attention
    !            may be needed.
    !
    !         1  A recoverable error.  This is used even if the error is
    !            so serious that the routine cannot return any useful
    !            answer.  If the user has told the error package to
    !            return after recoverable errors, then XERMSG will
    !            return to the Library routine which can then return to
    !            the user's routine.  The user may also permit the error
    !            package to terminate the program upon encountering a
    !            recoverable error.
    !
    !         2  A fatal error.  XERMSG will not return to its caller
    !            after it receives a fatal error.  This level should
    !            hardly ever be used; it is much better to allow the
    !            user a chance to recover.  An example of one of the few
    !            cases in which it is permissible to declare a level 2
    !            error is a reverse communication Library routine that
    !            is likely to be called repeatedly until it integrates
    !            across some interval.  If there is a serious error in
    !            the input such that another step cannot be taken and
    !            the Library routine is called again without the input
    !            error having been corrected by the caller, the Library
    !            routine will probably be called forever with improper
    !            input.  In this case, it is reasonable to declare the
    !            error to be fatal.
    !
    !    Each of the arguments to XERMSG is input; none will be modified by
    !    XERMSG.  A routine may make multiple calls to XERMSG with warning
    !    level messages; however, after a CALL to XERMSG with a recoverable
    !    error, the routine should return to the user.  Do not try to call
    !    XERMSG with a second recoverable error after the first recoverable
    !    error because the error package saves the error number.  The user
    !    can retrieve this error number by calling another entry point in
    !    the error handling package and then clear the error number when
    !    recovering from the error.  Calling XERMSG in succession causes the
    !    old error number to be overwritten by the latest error number.
    !    This is considered harmless for error numbers associated with
    !    warning messages but must not be done for error numbers of serious
    !    errors.  After a CALL to XERMSG with a recoverable error, the user
    !    must be given a chance to CALL NUMXER or XERCLR to retrieve or
    !    clear the error number.
    !***REFERENCES  R. E. Jones and D. K. Kahaner, XERROR, the SLATEC
    !             Error-handling Package, SAND82-0800, Sandia
    !             Laboratories, 1982.
    !***ROUTINES CALLED  FDUMP, J4SAVE, XERCNT, XERHLT, XERPRN, XERSVE
    !***REVISION HISTORY  (YYMMDD)
    !   880101  DATE WRITTEN
    !   880621  REVISED AS DIRECTED AT SLATEC CML MEETING OF FEBRUARY 1988.
    !       THERE ARE TWO BASIC CHANGES.
    !       1.  A NEW ROUTINE, XERPRN, IS USED INSTEAD OF XERPRT TO
    !           PRINT MESSAGES.  THIS ROUTINE WILL BREAK LONG MESSAGES
    !           INTO PIECES FOR PRINTING ON MULTIPLE LINES.  '$$' IS
    !           ACCEPTED AS A NEW LINE SENTINEL.  A PREFIX CAN BE
    !           ADDED TO EACH LINE TO BE PRINTED.  XERMSG USES EITHER
    !           ' ***' OR ' *  ' AND LONG MESSAGES ARE BROKEN EVERY
    !           72 CHARACTERS (AT MOST) SO THAT THE MAXIMUM LINE
    !           LENGTH OUTPUT CAN NOW BE AS GREAT AS 76.
    !       2.  THE TEXT OF ALL MESSAGES IS NOW IN UPPER CASE SINCE THE
    !           FORTRAN STANDARD DOCUMENT DOES NOT ADMIT THE EXISTENCE
    !           OF LOWER CASE.
    !   880708  REVISED AFTER THE SLATEC CML MEETING OF JUNE 29 AND 30.
    !       THE PRINCIPAL CHANGES ARE
    !       1.  CLARIFY COMMENTS IN THE PROLOGUES
    !       2.  RENAME XRPRNT TO XERPRN
    !       3.  REWORK HANDLING OF '$$' IN XERPRN TO HANDLE BLANK LINES
    !           SIMILAR TO THE WAY FORMAT STATEMENTS HANDLE THE /
    !           CHARACTER FOR NEW RECORDS.
    !   890706  REVISED WITH THE HELP OF FRED FRITSCH AND REG CLEMENS TO
    !       CLEAN UP THE CODING.
    !   890721  REVISED TO USE NEW FEATURE IN XERPRN TO COUNT CHARACTERS IN
    !       PREFIX.
    !   891013  REVISED TO CORRECT COMMENTS.
    !   891214  Prologue converted to Version 4.0 format.  (WRB)
    !   900510  Changed test on NERR to be -9999999 < NERR < 99999999, but
    !       NERR .NE. 0, and on LEVEL to be -2 < LEVEL < 3.  Added
    !       LEVEL=-1 logic, changed calls to XERSAV to XERSVE, and
    !       XERCTL to XERCNT.  (RWC)
    !   920501  Reformatted the REFERENCES section.  (WRB)
    !***END PROLOGUE  XERMSG
    CHARACTER(len = *) :: LIBRAR, SUBROU, MESSG
    CHARACTER(len = 8) :: XLIBR, XSUBR
    CHARACTER(len = 72) :: TEMP
    CHARACTER(len = 20) :: LFIRST
    INTEGER :: NERR, LEVEL, LKNTRL
    INTEGER :: J4SAVE, MAXMES, KDUMMY, I, KOUNT, LERR, LLEVEL
    INTEGER :: MKNTRL, LTEMP
    !***FIRST EXECUTABLE STATEMENT  XERMSG
    LKNTRL = J4SAVE (2, 0, .FALSE.)
    MAXMES = J4SAVE (4, 0, .FALSE.)
    !
    !   LKNTRL IS A LOCAL COPY OF THE CONTROL FLAG KONTRL.
    !   MAXMES IS THE MAXIMUM NUMBER OF TIMES ANY PARTICULAR MESSAGE
    !      SHOULD BE PRINTED.
    !
    !   WE PRINT A FATAL ERROR MESSAGE AND TERMINATE FOR AN ERROR IN
    !      CALLING XERMSG.  THE ERROR NUMBER SHOULD BE POSITIVE,
    !      AND THE LEVEL SHOULD BE BETWEEN 0 AND 2.
    !
    IF (NERR<-9999999 .OR. NERR>99999999 .OR. NERR==0 .OR. &
            LEVEL<-1 .OR. LEVEL>2) THEN
      CALL XERPRN (' ***', -1, 'FATAL ERROR IN...$$ ' // &
              'XERMSG -- INVALID ERROR NUMBER OR LEVEL$$ ' // &
              'JOB ABORT DUE TO FATAL ERROR.', 72)
      CALL XERSVE (' ', ' ', ' ', 0, 0, 0, KDUMMY)
      CALL XERHLT (' ***XERMSG -- INVALID INPUT')
      RETURN
    ENDIF
    !
    !   RECORD THE MESSAGE.
    !
    I = J4SAVE (1, NERR, .TRUE.)
    CALL XERSVE (LIBRAR, SUBROU, MESSG, 1, NERR, LEVEL, KOUNT)
    !
    !   HANDLE PRINT-ONCE WARNING MESSAGES.
    !
    IF (LEVEL==-1 .AND. KOUNT>1) RETURN
    !
    !   ALLOW TEMPORARY USER OVERRIDE OF THE CONTROL FLAG.
    !
    XLIBR = LIBRAR
    XSUBR = SUBROU
    LFIRST = MESSG
    LERR = NERR
    LLEVEL = LEVEL
    CALL XERCNT (XLIBR, XSUBR, LFIRST, LERR, LLEVEL, LKNTRL)
    !
    LKNTRL = MAX(-2, MIN(2, LKNTRL))
    MKNTRL = ABS(LKNTRL)
    !
    !   SKIP PRINTING IF THE CONTROL FLAG VALUE AS RESET IN XERCNT IS
    !   ZERO AND THE ERROR IS NOT FATAL.
    !
    IF (LEVEL<2 .AND. LKNTRL==0) GO TO 30
    IF (LEVEL==0 .AND. KOUNT>MAXMES) GO TO 30
    IF (LEVEL==1 .AND. KOUNT>MAXMES .AND. MKNTRL==1) GO TO 30
    IF (LEVEL==2 .AND. KOUNT>MAX(1, MAXMES)) GO TO 30
    !
    !   ANNOUNCE THE NAMES OF THE LIBRARY AND SUBROUTINE BY BUILDING A
    !   MESSAGE IN CHARACTER VARIABLE TEMP (NOT EXCEEDING 66 CHARACTERS)
    !   AND SENDING IT OUT VIA XERPRN.  PRINT ONLY IF CONTROL FLAG
    !   IS NOT ZERO.
    !
    IF (LKNTRL /= 0) THEN
      TEMP(1:21) = 'MESSAGE FROM ROUTINE '
      I = MIN(LEN(SUBROU), 16)
      TEMP(22:21 + I) = SUBROU(1:I)
      TEMP(22 + I:33 + I) = ' IN LIBRARY '
      LTEMP = 33 + I
      I = MIN(LEN(LIBRAR), 16)
      TEMP(LTEMP + 1:LTEMP + I) = LIBRAR (1:I)
      TEMP(LTEMP + I + 1:LTEMP + I + 1) = '.'
      LTEMP = LTEMP + I + 1
      CALL XERPRN (' ***', -1, TEMP(1:LTEMP), 72)
    ENDIF
    !
    !   IF LKNTRL IS POSITIVE, PRINT AN INTRODUCTORY LINE BEFORE
    !   PRINTING THE MESSAGE.  THE INTRODUCTORY LINE TELLS THE CHOICE
    !   FROM EACH OF THE FOLLOWING THREE OPTIONS.
    !   1.  LEVEL OF THE MESSAGE
    !          'INFORMATIVE MESSAGE'
    !          'POTENTIALLY RECOVERABLE ERROR'
    !          'FATAL ERROR'
    !   2.  WHETHER CONTROL FLAG WILL ALLOW PROGRAM TO CONTINUE
    !          'PROG CONTINUES'
    !          'PROG ABORTED'
    !   3.  WHETHER OR NOT A TRACEBACK WAS REQUESTED.  (THE TRACEBACK
    !       MAY NOT BE IMPLEMENTED AT SOME SITES, SO THIS ONLY TELLS
    !       WHAT WAS REQUESTED, NOT WHAT WAS DELIVERED.)
    !          'TRACEBACK REQUESTED'
    !          'TRACEBACK NOT REQUESTED'
    !   NOTICE THAT THE LINE INCLUDING FOUR PREFIX CHARACTERS WILL NOT
    !   EXCEED 74 CHARACTERS.
    !   WE SKIP THE NEXT BLOCK IF THE INTRODUCTORY LINE IS NOT NEEDED.
    !
    IF (LKNTRL > 0) THEN
      !
      !   THE FIRST PART OF THE MESSAGE TELLS ABOUT THE LEVEL.
      !
      IF (LEVEL <= 0) THEN
        TEMP(1:20) = 'INFORMATIVE MESSAGE,'
        LTEMP = 20
      ELSEIF (LEVEL == 1) THEN
        TEMP(1:30) = 'POTENTIALLY RECOVERABLE ERROR,'
        LTEMP = 30
      ELSE
        TEMP(1:12) = 'FATAL ERROR,'
        LTEMP = 12
      ENDIF
      !
      !   THEN WHETHER THE PROGRAM WILL CONTINUE.
      !
      IF ((MKNTRL==2 .AND. LEVEL>=1) .OR. &
              (MKNTRL==1 .AND. LEVEL==2)) THEN
        TEMP(LTEMP + 1:LTEMP + 14) = ' PROG ABORTED,'
        LTEMP = LTEMP + 14
      ELSE
        TEMP(LTEMP + 1:LTEMP + 16) = ' PROG CONTINUES,'
        LTEMP = LTEMP + 16
      ENDIF
      !
      !   FINALLY TELL WHETHER THERE SHOULD BE A TRACEBACK.
      !
      IF (LKNTRL > 0) THEN
        TEMP(LTEMP + 1:LTEMP + 20) = ' TRACEBACK REQUESTED'
        LTEMP = LTEMP + 20
      ELSE
        TEMP(LTEMP + 1:LTEMP + 24) = ' TRACEBACK NOT REQUESTED'
        LTEMP = LTEMP + 24
      ENDIF
      CALL XERPRN (' ***', -1, TEMP(1:LTEMP), 72)
    ENDIF
    !
    !   NOW SEND OUT THE MESSAGE.
    !
    CALL XERPRN (' *  ', -1, MESSG, 72)
    !
    !   IF LKNTRL IS POSITIVE, WRITE THE ERROR NUMBER AND REQUEST A
    !      TRACEBACK.
    !
    IF (LKNTRL > 0) THEN
      WRITE (TEMP, '(''ERROR NUMBER = '', I8)') NERR
      DO I = 16, 22
        IF (TEMP(I:I) /= ' ') GO TO 20
      END DO
      !
      20   CALL XERPRN (' *  ', -1, TEMP(1:15) // TEMP(I:23), 72)
    ENDIF
    !
    !   IF LKNTRL IS NOT ZERO, PRINT A BLANK LINE AND AN END OF MESSAGE.
    !
    IF (LKNTRL /= 0) THEN
      CALL XERPRN (' *  ', -1, ' ', 72)
      CALL XERPRN (' ***', -1, 'END OF MESSAGE', 72)
      CALL XERPRN ('    ', 0, ' ', 72)
    ENDIF
    !
    !   IF THE ERROR IS NOT FATAL OR THE ERROR IS RECOVERABLE AND THE
    !   CONTROL FLAG IS SET FOR RECOVERY, THEN RETURN.
    !
    30   IF (LEVEL<=0 .OR. (LEVEL==1 .AND. MKNTRL<=1)) RETURN
    !
    !   THE PROGRAM WILL BE STOPPED DUE TO AN UNRECOVERED ERROR OR A
    !   FATAL ERROR.  PRINT THE REASON FOR THE ABORT AND THE ERROR
    !   SUMMARY IF THE CONTROL FLAG AND THE MAXIMUM ERROR COUNT PERMIT.
    !
    IF (LKNTRL>0 .AND. KOUNT<MAX(1, MAXMES)) THEN
      IF (LEVEL == 1) THEN
        CALL XERPRN &
                (' ***', -1, 'JOB ABORT DUE TO UNRECOVERED ERROR.', 72)
      ELSE
        CALL XERPRN(' ***', -1, 'JOB ABORT DUE TO FATAL ERROR.', 72)
      ENDIF
      CALL XERSVE (' ', ' ', ' ', -1, 0, 0, KDUMMY)
      CALL XERHLT (' ')
    ELSE
      CALL XERHLT (MESSG)
    ENDIF

  END SUBROUTINE XERMSG

  !DECK I1MACH
  INTEGER FUNCTION I1MACH(I)
    IMPLICIT NONE
    !***BEGIN PROLOGUE  I1MACH
    !***PURPOSE  Return integer machine dependent constants.
    !***LIBRARY   SLATEC
    !***CATEGORY  R1
    !***TYPE      INTEGER (I1MACH-I)
    !***KEYWORDS  MACHINE CONSTANTS
    !***AUTHOR  Fox, P. A., (Bell Labs)
    ! Hall, A. D., (Bell Labs)
    ! Schryer, N. L., (Bell Labs)
    !***DESCRIPTION
    !
    !   I1MACH can be used to obtain machine-dependent parameters for the
    !   local machine environment.  It is a function subprogram with one
    !   (input) argument and can be referenced as follows:
    !
    !    K = I1MACH(I)
    !
    !   where I=1,...,16.  The (output) value of K above is determined by
    !   the (input) value of I.  The results for various values of I are
    !   discussed below.
    !
    !   I/O unit numbers:
    ! I1MACH( 1) = the standard input unit.
    ! I1MACH( 2) = the standard output unit.
    ! I1MACH( 3) = the standard punch unit.
    ! I1MACH( 4) = the standard error message unit.
    !
    !   Words:
    ! I1MACH( 5) = the number of bits per integer storage unit.
    ! I1MACH( 6) = the number of characters per integer storage unit.
    !
    !   Integers:
    ! assume integers are represented in the S-digit, base-A form
    !
    !            sign ( X(S-1)*A**(S-1) + ... + X(1)*A + X(0) )
    !
    !            where 0 .LE. X(I) .LT. A for I=0,...,S-1.
    ! I1MACH( 7) = A, the base.
    ! I1MACH( 8) = S, the number of base-A digits.
    ! I1MACH( 9) = A**S - 1, the largest magnitude.
    !
    !   Floating-Point Numbers:
    ! Assume floating-point numbers are represented in the T-digit,
    ! base-B form
    !            sign (B**E)*( (X(1)/B) + ... + (X(T)/B**T) )
    !
    !            where 0 .LE. X(I) .LT. B for I=1,...,T,
    !            0 .LT. X(1), and EMIN .LE. E .LE. EMAX.
    ! I1MACH(10) = B, the base.
    !
    !   Single-Precision:
    ! I1MACH(11) = T, the number of base-B digits.
    ! I1MACH(12) = EMIN, the smallest exponent E.
    ! I1MACH(13) = EMAX, the largest exponent E.
    !
    !   Double-Precision:
    ! I1MACH(14) = T, the number of base-B digits.
    ! I1MACH(15) = EMIN, the smallest exponent E.
    ! I1MACH(16) = EMAX, the largest exponent E.
    !
    !   To alter this function for a particular environment, the desired
    !   set of DATA statements should be activated by removing the C from
    !   column 1.  Also, the values of I1MACH(1) - I1MACH(4) should be
    !   checked for consistency with the local operating system.
    !
    !***REFERENCES  P. A. Fox, A. D. Hall and N. L. Schryer, Framework for
    !             a portable library, ACM Transactions on Mathematical
    !             Software 4, 2 (June 1978), pp. 177-188.
    !***ROUTINES CALLED  (NONE)
    !***REVISION HISTORY  (YYMMDD)
    !   750101  DATE WRITTEN
    !   891012  Added VAX G-floating constants.  (WRB)
    !   891012  REVISION DATE from Version 3.2
    !   891214  Prologue converted to Version 4.0 format.  (BAB)
    !   900618  Added DEC RISC constants.  (WRB)
    !   900723  Added IBM RS 6000 constants.  (WRB)
    !   901009  Correct I1MACH(7) for IBM Mainframes. Should be 2 not 16.
    !       (RWC)
    !   910710  Added HP 730 constants.  (SMR)
    !   911114  Added Convex IEEE constants.  (WRB)
    !   920121  Added SUN -r8 compiler option constants.  (WRB)
    !   920229  Added Touchstone Delta i860 constants.  (WRB)
    !   920501  Reformatted the REFERENCES section.  (WRB)
    !   920625  Added Convex -p8 and -pd8 compiler option constants.
    !       (BKS, WRB)
    !   930201  Added DEC Alpha and SGI constants.  (RWC and WRB)
    !   930618  Corrected I1MACH(5) for Convex -p8 and -pd8 compiler
    !       options.  (DWL, RWC and WRB).
    !   100623  Use Fortran 95 intrinsic functions (Lionel GUEZ)
    !***END PROLOGUE  I1MACH
    !
    INTEGER :: IMACH(16), OUTPUT
    SAVE IMACH
    EQUIVALENCE (IMACH(4), OUTPUT)
    INTEGER :: I
    !***FIRST EXECUTABLE STATEMENT  I1MACH
    IMACH(1) = 5
    IMACH(2) = 6
    IMACH(3) = 6
    IMACH(4) = 6
    IMACH(5) = bit_size(0)
    IMACH(6) = IMACH(5) / 8
    IMACH(7) = radix(0)
    IMACH(8) = digits(0)
    IMACH(9) = huge(0)
    IMACH(10) = radix(0.)
    IMACH(11) = digits(0.)
    IMACH(12) = minexponent(0.)
    IMACH(13) = maxexponent(0.)
    IMACH(14) = digits(0d0)
    IMACH(15) = minexponent(0d0)
    IMACH(16) = maxexponent(0d0)
    IF (I < 1  .OR.  I > 16) GO TO 10
    !
    I1MACH = IMACH(I)
    RETURN
    !
    10   CONTINUE
    WRITE (UNIT = OUTPUT, FMT = 9000)
    9000   FORMAT ('1ERROR    1 IN I1MACH - I OUT OF BOUNDS')
    !
    ! CALL FDUMP
    !
    STOP
  END FUNCTION I1MACH

  !DECK XGETUA
  SUBROUTINE XGETUA(IUNITA, N)
    IMPLICIT NONE
    !***BEGIN PROLOGUE  XGETUA
    !***PURPOSE  Return unit number(s) to which error messages are being
    ! sent.
    !***LIBRARY   SLATEC (XERROR)
    !***CATEGORY  R3C
    !***TYPE      ALL (XGETUA-A)
    !***KEYWORDS  ERROR, XERROR
    !***AUTHOR  Jones, R. E., (SNLA)
    !***DESCRIPTION
    !
    ! Abstract
    !    XGETUA may be called to determine the unit number or numbers
    !    to which error messages are being sent.
    !    These unit numbers may have been set by a CALL to XSETUN,
    !    or a CALL to XSETUA, or may be a default value.
    !
    ! Description of Parameters
    !  --Output--
    !    IUNIT - an array of one to five unit numbers, depending
    !            on the value of N.  A value of zero refers to the
    !            default unit, as defined by the I1MACH machine
    !            constant routine.  Only IUNIT(1),...,IUNIT(N) are
    !            defined by XGETUA.  The values of IUNIT(N+1),...,
    !            IUNIT(5) are not defined (for N .LT. 5) or altered
    !            in any way by XGETUA.
    !    N     - the number of units to which copies of the
    !            error messages are being sent.  N will be in the
    !            range from 1 to 5.
    !
    !***REFERENCES  R. E. Jones and D. K. Kahaner, XERROR, the SLATEC
    !             Error-handling Package, SAND82-0800, Sandia
    !             Laboratories, 1982.
    !***ROUTINES CALLED  J4SAVE
    !***REVISION HISTORY  (YYMMDD)
    !   790801  DATE WRITTEN
    !   861211  REVISION DATE from Version 3.2
    !   891214  Prologue converted to Version 4.0 format.  (BAB)
    !   920501  Reformatted the REFERENCES section.  (WRB)
    !***END PROLOGUE  XGETUA
    DIMENSION IUNITA(5)
    INTEGER :: IUNITA, N, J4SAVE, INDEX, I
    !***FIRST EXECUTABLE STATEMENT  XGETUA
    N = J4SAVE(5, 0, .FALSE.)
    DO I = 1, N
      INDEX = I + 4
      IF (I==1) INDEX = 3
      IUNITA(I) = J4SAVE(INDEX, 0, .FALSE.)
    END DO

  END SUBROUTINE XGETUA

  !DECK XERSVE
  SUBROUTINE XERSVE(LIBRAR, SUBROU, MESSG, KFLAG, NERR, LEVEL, &
          ICOUNT)
    IMPLICIT NONE
    !***BEGIN PROLOGUE  XERSVE
    !***SUBSIDIARY
    !***PURPOSE  Record that an error has occurred.
    !***LIBRARY   SLATEC (XERROR)
    !***CATEGORY  R3
    !***TYPE      ALL (XERSVE-A)
    !***KEYWORDS  ERROR, XERROR
    !***AUTHOR  Jones, R. E., (SNLA)
    !***DESCRIPTION
    !
    ! *Usage:
    !
    !    INTEGER  KFLAG, NERR, LEVEL, ICOUNT
    !    CHARACTER * (len) LIBRAR, SUBROU, MESSG
    !
    !    CALL XERSVE (LIBRAR, SUBROU, MESSG, KFLAG, NERR, LEVEL, ICOUNT)
    !
    ! *Arguments:
    !
    !    LIBRAR :IN    is the library that the message is from.
    !    SUBROU :IN    is the SUBROUTINE that the message is from.
    !    MESSG  :IN    is the message to be saved.
    !    KFLAG  :IN    indicates the action to be performed.
    !                  when KFLAG > 0, the message in MESSG is saved.
    !                  when KFLAG=0 the tables will be dumped and
    !                  cleared.
    !                  when KFLAG < 0, the tables will be dumped and
    !                  not cleared.
    !    NERR   :IN    is the error number.
    !    LEVEL  :IN    is the error severity.
    !    ICOUNT :OUT   the number of times this message has been seen,
    !                  or zero if the table has overflowed and does not
    !                  contain this message specifically.  When KFLAG=0,
    !                  ICOUNT will not be altered.
    !
    ! *Description:
    !
    !   Record that this error occurred and possibly dump and clear the
    !   tables.
    !
    !***REFERENCES  R. E. Jones and D. K. Kahaner, XERROR, the SLATEC
    !             Error-handling Package, SAND82-0800, Sandia
    !             Laboratories, 1982.
    !***ROUTINES CALLED  I1MACH, XGETUA
    !***REVISION HISTORY  (YYMMDD)
    !   800319  DATE WRITTEN
    !   861211  REVISION DATE from Version 3.2
    !   891214  Prologue converted to Version 4.0 format.  (BAB)
    !   900413  Routine modified to remove reference to KFLAG.  (WRB)
    !   900510  Changed to add LIBRARY NAME and SUBROUTINE to calling
    !       sequence, use IF-THEN-ELSE, make number of saved entries
    !       easily changeable, changed routine name from XERSAV to
    !       XERSVE.  (RWC)
    !   910626  Added LIBTAB and SUBTAB to SAVE statement.  (BKS)
    !   920501  Reformatted the REFERENCES section.  (WRB)
    !***END PROLOGUE  XERSVE
    INTEGER, PARAMETER :: LENTAB = 10
    INTEGER :: LUN(5)
    CHARACTER(len = *) :: LIBRAR, SUBROU, MESSG
    CHARACTER(len = 8) :: LIBTAB(LENTAB), SUBTAB(LENTAB), LIB, SUB
    CHARACTER(len = 20) :: MESTAB(LENTAB), MES
    DIMENSION NERTAB(LENTAB), LEVTAB(LENTAB), KOUNT(LENTAB)
    SAVE LIBTAB, SUBTAB, MESTAB, NERTAB, LEVTAB, KOUNT, KOUNTX, NMSG
    DATA KOUNTX/0/, NMSG/0/
    INTEGER :: NERR, LEVEL, KONTRL
    INTEGER :: NERTAB, LEVTAB, KOUNT, KOUNTX, NMSG
    INTEGER :: KFLAG, ICOUNT, NUNIT, KUNIT, IUNIT, I1MACH, I
    !***FIRST EXECUTABLE STATEMENT  XERSVE
    !
    IF (KFLAG<=0) THEN
      !
      !    Dump the table.
      !
      IF (NMSG==0) RETURN
      !
      !    Print to each unit.
      !
      CALL XGETUA (LUN, NUNIT)
      DO KUNIT = 1, NUNIT
        IUNIT = LUN(KUNIT)
        IF (IUNIT==0) IUNIT = I1MACH(4)
        !
        !       Print the table header.
        !
        WRITE (IUNIT, 9000)
        !
        !       Print body of table.
        !
        DO I = 1, NMSG
          WRITE (IUNIT, 9010) LIBTAB(I), SUBTAB(I), MESTAB(I), &
                  NERTAB(I), LEVTAB(I), KOUNT(I)
        END DO
        !
        !       Print number of other errors.
        !
        IF (KOUNTX/=0) WRITE (IUNIT, 9020) KOUNTX
        WRITE (IUNIT, 9030)
      END DO
      !
      !    Clear the error tables.
      !
      IF (KFLAG==0) THEN
        NMSG = 0
        KOUNTX = 0
      ENDIF
    ELSE
      !
      !    PROCESS A MESSAGE...
      !    SEARCH FOR THIS MESSG, OR ELSE AN EMPTY SLOT FOR THIS MESSG,
      !    OR ELSE DETERMINE THAT THE ERROR TABLE IS FULL.
      !
      LIB = LIBRAR
      SUB = SUBROU
      MES = MESSG
      DO I = 1, NMSG
        IF (LIB==LIBTAB(I) .AND. SUB==SUBTAB(I) .AND. &
                MES==MESTAB(I) .AND. NERR==NERTAB(I) .AND. &
                LEVEL==LEVTAB(I)) THEN
          KOUNT(I) = KOUNT(I) + 1
          ICOUNT = KOUNT(I)
          RETURN
        ENDIF
      END DO
      !
      IF (NMSG<LENTAB) THEN
        !
        !       Empty slot found for new message.
        !
        NMSG = NMSG + 1
        LIBTAB(I) = LIB
        SUBTAB(I) = SUB
        MESTAB(I) = MES
        NERTAB(I) = NERR
        LEVTAB(I) = LEVEL
        KOUNT (I) = 1
        ICOUNT = 1
      ELSE
        !
        !       Table is full.
        !
        KOUNTX = KOUNTX + 1
        ICOUNT = 0
      ENDIF
    ENDIF
    RETURN
    !
    ! Formats.
    !
    9000   FORMAT ('0          ERROR MESSAGE SUMMARY' / &
            ' LIBRARY    SUBROUTINE MESSAGE START             NERR', &
            '     LEVEL     COUNT')
    9010   FORMAT (1X, A, 3X, A, 3X, A, 3I10)
    9020   FORMAT ('0OTHER ERRORS NOT INDIVIDUALLY TABULATED = ', I10)
    9030   FORMAT (1X)
  END SUBROUTINE XERSVE

  !DECK XERPRN
  SUBROUTINE XERPRN(PREFIX, NPREF, MESSG, NWRAP)
    IMPLICIT NONE
    !***BEGIN PROLOGUE  XERPRN
    !***SUBSIDIARY
    !***PURPOSE  Print error messages processed by XERMSG.
    !***LIBRARY   SLATEC (XERROR)
    !***CATEGORY  R3C
    !***TYPE      ALL (XERPRN-A)
    !***KEYWORDS  ERROR MESSAGES, PRINTING, XERROR
    !***AUTHOR  Fong, Kirby, (NMFECC at LLNL)
    !***DESCRIPTION
    !
    ! This routine sends one or more lines to each of the (up to five)
    ! LOGICAL units to which error messages are to be sent.  This routine
    ! is called several times by XERMSG, sometimes with a single line to
    ! print and sometimes with a (potentially very long) message that may
    ! wrap around into multiple lines.
    !
    ! PREFIX  Input argument of type CHARACTER.  This argument contains
    !     characters to be put at the beginning of each line before
    !     the body of the message.  No more than 16 characters of
    !     PREFIX will be used.
    !
    ! NPREF   Input argument of type INTEGER.  This argument is the number
    !     of characters to use from PREFIX.  If it is negative, the
    !     intrinsic function LEN is used to determine its length.  If
    !         it is zero, PREFIX is not used.  If it exceeds 16 or if
    !     LEN(PREFIX) exceeds 16, ONLY the first 16 characters will be
    !     used.  If NPREF is positive and the length of PREFIX is less
    !     than NPREF, a copy of PREFIX extended with blanks to length
    !     NPREF will be used.
    !
    ! MESSG   Input argument of type CHARACTER.  This is the text of a
    !     message to be printed.  If it is a long message, it will be
    !     broken into pieces for printing on multiple lines.  Each line
    !     will start with the appropriate prefix and be followed by a
    !     piece of the message.  NWRAP is the number of characters per
    !     piece; that is, after each NWRAP characters, we break and
    !     start a new line.  In addition the characters '$$' embedded
    !     in MESSG are a sentinel for a new line.  The counting of
    !     characters up to NWRAP starts over for each new line.  The
    !     value of NWRAP typically used by XERMSG is 72 since many
    !     older error messages in the SLATEC Library are laid out to
    !     rely on wrap-around every 72 characters.
    !
    ! NWRAP   Input argument of type INTEGER.  This gives the maximum size
    !     piece into which to break MESSG for printing on multiple
    !     lines.  An embedded '$$' ends a line, and the count restarts
    !     at the following character.  If a line break does not occur
    !     on a blank (it would split a word) that word is moved to the
    !     next line.  Values of NWRAP less than 16 will be treated as
    !     16.  Values of NWRAP greater than 132 will be treated as 132.
    !     The actual line length will be NPREF + NWRAP after NPREF has
    !     been adjusted to fall between 0 and 16 and NWRAP has been
    !     adjusted to fall between 16 and 132.
    !
    !***REFERENCES  R. E. Jones and D. K. Kahaner, XERROR, the SLATEC
    !             Error-handling Package, SAND82-0800, Sandia
    !             Laboratories, 1982.
    !***ROUTINES CALLED  I1MACH, XGETUA
    !***REVISION HISTORY  (YYMMDD)
    !   880621  DATE WRITTEN
    !   880708  REVISED AFTER THE SLATEC CML SUBCOMMITTEE MEETING OF
    !       JUNE 29 AND 30 TO CHANGE THE NAME TO XERPRN AND TO REWORK
    !       THE HANDLING OF THE NEW LINE SENTINEL TO BEHAVE LIKE THE
    !       SLASH CHARACTER IN FORMAT STATEMENTS.
    !   890706  REVISED WITH THE HELP OF FRED FRITSCH AND REG CLEMENS TO
    !       STREAMLINE THE CODING AND FIX A BUG THAT CAUSED EXTRA BLANK
    !       LINES TO BE PRINTED.
    !   890721  REVISED TO ADD A NEW FEATURE.  A NEGATIVE VALUE OF NPREF
    !       CAUSES LEN(PREFIX) TO BE USED AS THE LENGTH.
    !   891013  REVISED TO CORRECT ERROR IN CALCULATING PREFIX LENGTH.
    !   891214  Prologue converted to Version 4.0 format.  (WRB)
    !   900510  Added code to break messages between words.  (RWC)
    !   920501  Reformatted the REFERENCES section.  (WRB)
    !***END PROLOGUE  XERPRN
    CHARACTER(len = *) :: PREFIX, MESSG
    INTEGER :: NPREF, NWRAP
    CHARACTER(len = 148) :: CBUFF
    INTEGER :: IU(5), NUNIT
    CHARACTER(len = 2) :: NEWLIN
    PARAMETER (NEWLIN = '$$')
    INTEGER :: N, I1MACH, I, LPREF, LWRAP, LENMSG, NEXTC
    INTEGER :: LPIECE, IDELTA
    !***FIRST EXECUTABLE STATEMENT  XERPRN
    CALL XGETUA(IU, NUNIT)
    !
    !   A ZERO VALUE FOR A LOGICAL UNIT NUMBER MEANS TO USE THE STANDARD
    !   ERROR MESSAGE UNIT INSTEAD.  I1MACH(4) RETRIEVES THE STANDARD
    !   ERROR MESSAGE UNIT.
    !
    N = I1MACH(4)
    DO I = 1, NUNIT
      IF (IU(I) == 0) IU(I) = N
    END DO
    !
    !   LPREF IS THE LENGTH OF THE PREFIX.  THE PREFIX IS PLACED AT THE
    !   BEGINNING OF CBUFF, THE CHARACTER BUFFER, AND KEPT THERE DURING
    !   THE REST OF THIS ROUTINE.
    !
    IF (NPREF < 0) THEN
      LPREF = LEN(PREFIX)
    ELSE
      LPREF = NPREF
    ENDIF
    LPREF = MIN(16, LPREF)
    IF (LPREF /= 0) CBUFF(1:LPREF) = PREFIX
    !
    !   LWRAP IS THE MAXIMUM NUMBER OF CHARACTERS WE WANT TO TAKE AT ONE
    !   TIME FROM MESSG TO PRINT ON ONE LINE.
    !
    LWRAP = MAX(16, MIN(132, NWRAP))
    !
    !   SET LENMSG TO THE LENGTH OF MESSG, IGNORE ANY TRAILING BLANKS.
    !
    LENMSG = LEN(MESSG)
    N = LENMSG
    DO I = 1, N
      IF (MESSG(LENMSG:LENMSG) /= ' ') GO TO 30
      LENMSG = LENMSG - 1
    END DO
    30   CONTINUE
    !
    !   IF THE MESSAGE IS ALL BLANKS, THEN PRINT ONE BLANK LINE.
    !
    IF (LENMSG == 0) THEN
      CBUFF(LPREF + 1:LPREF + 1) = ' '
      DO I = 1, NUNIT
        WRITE(IU(I), '(A)') CBUFF(1:LPREF + 1)
      END DO
      RETURN
    ENDIF
    !
    !   SET NEXTC TO THE POSITION IN MESSG WHERE THE NEXT SUBSTRING
    !   STARTS.  FROM THIS POSITION WE SCAN FOR THE NEW LINE SENTINEL.
    !   WHEN NEXTC EXCEEDS LENMSG, THERE IS NO MORE TO PRINT.
    !   WE LOOP BACK TO LABEL 50 UNTIL ALL PIECES HAVE BEEN PRINTED.
    !
    !   WE LOOK FOR THE NEXT OCCURRENCE OF THE NEW LINE SENTINEL.  THE
    !   INDEX INTRINSIC FUNCTION RETURNS ZERO IF THERE IS NO OCCURRENCE
    !   OR IF THE LENGTH OF THE FIRST ARGUMENT IS LESS THAN THE LENGTH
    !   OF THE SECOND ARGUMENT.
    !
    !   THERE ARE SEVERAL CASES WHICH SHOULD BE CHECKED FOR IN THE
    !   FOLLOWING ORDER.  WE ARE ATTEMPTING TO SET LPIECE TO THE NUMBER
    !   OF CHARACTERS THAT SHOULD BE TAKEN FROM MESSG STARTING AT
    !   POSITION NEXTC.
    !
    !   LPIECE .EQ. 0   THE NEW LINE SENTINEL DOES NOT OCCUR IN THE
    !                   REMAINDER OF THE CHARACTER STRING.  LPIECE
    !                   SHOULD BE SET TO LWRAP OR LENMSG+1-NEXTC,
    !                   WHICHEVER IS LESS.
    !
    !   LPIECE .EQ. 1   THE NEW LINE SENTINEL STARTS AT MESSG(NEXTC:
    !                   NEXTC).  LPIECE IS EFFECTIVELY ZERO, AND WE
    !                   PRINT NOTHING TO AVOID PRODUCING UNNECESSARY
    !                   BLANK LINES.  THIS TAKES CARE OF THE SITUATION
    !                   WHERE THE LIBRARY ROUTINE HAS A MESSAGE OF
    !                   EXACTLY 72 CHARACTERS FOLLOWED BY A NEW LINE
    !                   SENTINEL FOLLOWED BY MORE CHARACTERS.  NEXTC
    !                   SHOULD BE INCREMENTED BY 2.
    !
    !   LPIECE .GT. LWRAP+1  REDUCE LPIECE TO LWRAP.
    !
    !   ELSE            THIS LAST CASE MEANS 2 .LE. LPIECE .LE. LWRAP+1
    !                   RESET LPIECE = LPIECE-1.  NOTE THAT THIS
    !                   PROPERLY HANDLES THE END CASE WHERE LPIECE .EQ.
    !                   LWRAP+1.  THAT IS, THE SENTINEL FALLS EXACTLY
    !                   AT THE END OF A LINE.
    !
    NEXTC = 1
    50   LPIECE = INDEX(MESSG(NEXTC:LENMSG), NEWLIN)
    IF (LPIECE == 0) THEN
      !
      !   THERE WAS NO NEW LINE SENTINEL FOUND.
      !
      IDELTA = 0
      LPIECE = MIN(LWRAP, LENMSG + 1 - NEXTC)
      IF (LPIECE < LENMSG + 1 - NEXTC) THEN
        DO I = LPIECE + 1, 2, -1
          IF (MESSG(NEXTC + I - 1:NEXTC + I - 1) == ' ') THEN
            LPIECE = I - 1
            IDELTA = 1
            GOTO 54
          ENDIF
        END DO
      ENDIF
      54   CBUFF(LPREF + 1:LPREF + LPIECE) = MESSG(NEXTC:NEXTC + LPIECE - 1)
      NEXTC = NEXTC + LPIECE + IDELTA
    ELSEIF (LPIECE == 1) THEN
      !
      !   WE HAVE A NEW LINE SENTINEL AT MESSG(NEXTC:NEXTC+1).
      !   DON'T PRINT A BLANK LINE.
      !
      NEXTC = NEXTC + 2
      GO TO 50
    ELSEIF (LPIECE > LWRAP + 1) THEN
      !
      !   LPIECE SHOULD BE SET DOWN TO LWRAP.
      !
      IDELTA = 0
      LPIECE = LWRAP
      DO I = LPIECE + 1, 2, -1
        IF (MESSG(NEXTC + I - 1:NEXTC + I - 1) == ' ') THEN
          LPIECE = I - 1
          IDELTA = 1
          GOTO 58
        ENDIF
      END DO
      58   CBUFF(LPREF + 1:LPREF + LPIECE) = MESSG(NEXTC:NEXTC + LPIECE - 1)
      NEXTC = NEXTC + LPIECE + IDELTA
    ELSE
      !
      !   IF WE ARRIVE HERE, IT MEANS 2 .LE. LPIECE .LE. LWRAP+1.
      !   WE SHOULD DECREMENT LPIECE BY ONE.
      !
      LPIECE = LPIECE - 1
      CBUFF(LPREF + 1:LPREF + LPIECE) = MESSG(NEXTC:NEXTC + LPIECE - 1)
      NEXTC = NEXTC + LPIECE + 2
    ENDIF
    !
    !   PRINT
    !
    DO I = 1, NUNIT
      WRITE(IU(I), '(A)') CBUFF(1:LPREF + LPIECE)
    END DO
    !
    IF (NEXTC <= LENMSG) GO TO 50

  END SUBROUTINE XERPRN

  !DECK XERHLT
  SUBROUTINE XERHLT(MESSG)
    !***BEGIN PROLOGUE  XERHLT
    !***SUBSIDIARY
    !***PURPOSE  Abort program execution and print error message.
    !***LIBRARY   SLATEC (XERROR)
    !***CATEGORY  R3C
    !***TYPE      ALL (XERHLT-A)
    !***KEYWORDS  ABORT PROGRAM EXECUTION, ERROR, XERROR
    !***AUTHOR  Jones, R. E., (SNLA)
    !***DESCRIPTION
    !
    ! Abstract
    !    ***Note*** machine dependent routine
    !    XERHLT aborts the execution of the program.
    !    The error message causing the abort is given in the calling
    !    sequence, in case one needs it for printing on a dayfile,
    !    for example.
    !
    ! Description of Parameters
    !    MESSG is as in XERMSG.
    !
    !***REFERENCES  R. E. Jones and D. K. Kahaner, XERROR, the SLATEC
    !             Error-handling Package, SAND82-0800, Sandia
    !             Laboratories, 1982.
    !***ROUTINES CALLED  (NONE)
    !***REVISION HISTORY  (YYMMDD)
    !   790801  DATE WRITTEN
    !   861211  REVISION DATE from Version 3.2
    !   891214  Prologue converted to Version 4.0 format.  (BAB)
    !   900206  Routine changed from user-callable to subsidiary.  (WRB)
    !   900510  Changed calling sequence to delete length of character
    !       and changed routine name from XERABT to XERHLT.  (RWC)
    !   920501  Reformatted the REFERENCES section.  (WRB)
    !***END PROLOGUE  XERHLT
    CHARACTER(len = *) :: MESSG
    !***FIRST EXECUTABLE STATEMENT  XERHLT
    STOP
  END SUBROUTINE XERHLT

  !DECK XERCNT
  SUBROUTINE XERCNT(LIBRAR, SUBROU, MESSG, NERR, LEVEL, KONTRL)
    IMPLICIT NONE
    !***BEGIN PROLOGUE  XERCNT
    !***SUBSIDIARY
    !***PURPOSE  Allow user control over handling of errors.
    !***LIBRARY   SLATEC (XERROR)
    !***CATEGORY  R3C
    !***TYPE      ALL (XERCNT-A)
    !***KEYWORDS  ERROR, XERROR
    !***AUTHOR  Jones, R. E., (SNLA)
    !***DESCRIPTION
    !
    ! Abstract
    !    Allows user control over handling of individual errors.
    !    Just after each message is recorded, but before it is
    !    processed any further (i.e., before it is printed or
    !    a decision to abort is made), a CALL is made to XERCNT.
    !    If the user has provided his own version of XERCNT, he
    !    can then override the value of KONTROL used in processing
    !    this message by redefining its value.
    !    KONTRL may be set to any value from -2 to 2.
    !    The meanings for KONTRL are the same as in XSETF, except
    !    that the value of KONTRL changes only for this message.
    !    If KONTRL is set to a value outside the range from -2 to 2,
    !    it will be moved back into that range.
    !
    ! Description of Parameters
    !
    !  --Input--
    !    LIBRAR - the library that the routine is in.
    !    SUBROU - the SUBROUTINE that XERMSG is being called from
    !    MESSG  - the first 20 characters of the error message.
    !    NERR   - same as in the CALL to XERMSG.
    !    LEVEL  - same as in the CALL to XERMSG.
    !    KONTRL - the current value of the control flag as set
    !             by a CALL to XSETF.
    !
    !  --Output--
    !    KONTRL - the new value of KONTRL.  If KONTRL is not
    !             defined, it will remain at its original value.
    !             This changed value of control affects only
    !             the current occurrence of the current message.
    !
    !***REFERENCES  R. E. Jones and D. K. Kahaner, XERROR, the SLATEC
    !             Error-handling Package, SAND82-0800, Sandia
    !             Laboratories, 1982.
    !***ROUTINES CALLED  (NONE)
    !***REVISION HISTORY  (YYMMDD)
    !   790801  DATE WRITTEN
    !   861211  REVISION DATE from Version 3.2
    !   891214  Prologue converted to Version 4.0 format.  (BAB)
    !   900206  Routine changed from user-callable to subsidiary.  (WRB)
    !   900510  Changed calling sequence to include LIBRARY and SUBROUTINE
    !       names, changed routine name from XERCTL to XERCNT.  (RWC)
    !   920501  Reformatted the REFERENCES section.  (WRB)
    !***END PROLOGUE  XERCNT
    CHARACTER(len = *) :: LIBRAR, SUBROU, MESSG
    INTEGER :: NERR, LEVEL, KONTRL
    !***FIRST EXECUTABLE STATEMENT  XERCNT

  END SUBROUTINE XERCNT

  !DECK J4SAVE
  FUNCTION J4SAVE(IWHICH, IVALUE, ISET)
    IMPLICIT NONE
    !***BEGIN PROLOGUE  J4SAVE
    !***SUBSIDIARY
    !***PURPOSE  Save or reCALL global variables needed by error
    ! handling routines.
    !***LIBRARY   SLATEC (XERROR)
    !***TYPE      INTEGER (J4SAVE-I)
    !***KEYWORDS  ERROR MESSAGES, ERROR NUMBER, RECALL, SAVE, XERROR
    !***AUTHOR  Jones, R. E., (SNLA)
    !***DESCRIPTION
    !
    ! Abstract
    !    J4SAVE saves and recalls several global variables needed
    !    by the library error handling routines.
    !
    ! Description of Parameters
    !  --Input--
    !    IWHICH - Index of item desired.
    !            = 1 Refers to current error number.
    !            = 2 Refers to current error control flag.
    !            = 3 Refers to current unit number to which error
    !                messages are to be sent.  (0 means use standard.)
    !            = 4 Refers to the maximum number of times any
    !                 message is to be printed (as set by XERMAX).
    !            = 5 Refers to the total number of units to which
    !                 each error message is to be written.
    !            = 6 Refers to the 2nd unit for error messages
    !            = 7 Refers to the 3rd unit for error messages
    !            = 8 Refers to the 4th unit for error messages
    !            = 9 Refers to the 5th unit for error messages
    !    IVALUE - The value to be set for the IWHICH-th parameter,
    !             if ISET is .TRUE. .
    !    ISET   - If ISET=.TRUE., the IWHICH-th parameter will BE
    !             given the value, IVALUE.  If ISET=.FALSE., the
    !             IWHICH-th parameter will be unchanged, and IVALUE
    !             is a dummy parameter.
    !  --Output--
    !    The (old) value of the IWHICH-th parameter will be returned
    !    in the function value, J4SAVE.
    !
    !***SEE ALSO  XERMSG
    !***REFERENCES  R. E. Jones and D. K. Kahaner, XERROR, the SLATEC
    !             Error-handling Package, SAND82-0800, Sandia
    !             Laboratories, 1982.
    !***ROUTINES CALLED  (NONE)
    !***REVISION HISTORY  (YYMMDD)
    !   790801  DATE WRITTEN
    !   891214  Prologue converted to Version 4.0 format.  (BAB)
    !   900205  Minor modifications to prologue.  (WRB)
    !   900402  Added TYPE section.  (WRB)
    !   910411  Added KEYWORDS section.  (WRB)
    !   920501  Reformatted the REFERENCES section.  (WRB)
    !***END PROLOGUE  J4SAVE
    LOGICAL :: ISET
    INTEGER :: IPARAM(9)
    SAVE IPARAM
    DATA IPARAM(1), IPARAM(2), IPARAM(3), IPARAM(4)/0, 2, 0, 10/
    DATA IPARAM(5)/1/
    DATA IPARAM(6), IPARAM(7), IPARAM(8), IPARAM(9)/0, 0, 0, 0/
    INTEGER :: J4SAVE, IWHICH, IVALUE
    !***FIRST EXECUTABLE STATEMENT  J4SAVE
    J4SAVE = IPARAM(IWHICH)
    IF (ISET) IPARAM(IWHICH) = IVALUE

  END FUNCTION J4SAVE


END MODULE lmdz_xer