MODULE oasis

  ! This module contains subroutines for initialization, sending and receiving
  ! towards the coupler OASIS3. It also contains some parameters for the coupling.

  ! This module should always be compiled. With the coupler OASIS3 available the cpp key
  ! CPP_COUPLE should be set and the entier of this file will then be compiled.
  ! In a forced mode CPP_COUPLE should not be defined and the compilation ends before
  ! the CONTAINS, without compiling the subroutines.

  USE dimphy
  USE lmdz_phys_para
  USE lmdz_write_field_phy

#ifdef CPP_COUPLE
! Use of Oasis-MCT coupler 
#if defined CPP_OMCT
  USE mod_prism
! Use of Oasis3 coupler 
#else 
  USE mod_prism_proto
  USE mod_prism_def_partition_proto
  USE mod_prism_get_proto
  USE mod_prism_put_proto
#endif
#endif

  IMPLICIT NONE

  ! Id for fields sent to ocean
  INTEGER, PARAMETER :: ids_tauxxu = 1
  INTEGER, PARAMETER :: ids_tauyyu = 2
  INTEGER, PARAMETER :: ids_tauzzu = 3
  INTEGER, PARAMETER :: ids_tauxxv = 4
  INTEGER, PARAMETER :: ids_tauyyv = 5
  INTEGER, PARAMETER :: ids_tauzzv = 6
  INTEGER, PARAMETER :: ids_windsp = 7
  INTEGER, PARAMETER :: ids_shfice = 8
  INTEGER, PARAMETER :: ids_shfoce = 9
  INTEGER, PARAMETER :: ids_shftot = 10
  INTEGER, PARAMETER :: ids_nsfice = 11
  INTEGER, PARAMETER :: ids_nsfoce = 12
  INTEGER, PARAMETER :: ids_nsftot = 13
  INTEGER, PARAMETER :: ids_dflxdt = 14
  INTEGER, PARAMETER :: ids_totrai = 15
  INTEGER, PARAMETER :: ids_totsno = 16
  INTEGER, PARAMETER :: ids_toteva = 17
  INTEGER, PARAMETER :: ids_icevap = 18
  INTEGER, PARAMETER :: ids_ocevap = 19
  INTEGER, PARAMETER :: ids_calvin = 20
  INTEGER, PARAMETER :: ids_liqrun = 21
  INTEGER, PARAMETER :: ids_runcoa = 22
  INTEGER, PARAMETER :: ids_rivflu = 23
  INTEGER, PARAMETER :: ids_atmco2 = 24
  INTEGER, PARAMETER :: ids_taumod = 25
  INTEGER, PARAMETER :: ids_qraioc = 26
  INTEGER, PARAMETER :: ids_qsnooc = 27
  INTEGER, PARAMETER :: ids_qraiic = 28
  INTEGER, PARAMETER :: ids_qsnoic = 29
  INTEGER, PARAMETER :: ids_delta_sst = 30, ids_delta_sal = 31, ids_dter = 32, &
          ids_dser = 33, ids_dt_ds = 34

  INTEGER, PARAMETER :: maxsend = 34  ! Maximum number of fields to send

  ! Id for fields received from ocean

  INTEGER, PARAMETER :: idr_sisutw = 1
  INTEGER, PARAMETER :: idr_icecov = 2
  INTEGER, PARAMETER :: idr_icealw = 3
  INTEGER, PARAMETER :: idr_icetem = 4
  INTEGER, PARAMETER :: idr_curenx = 5
  INTEGER, PARAMETER :: idr_cureny = 6
  INTEGER, PARAMETER :: idr_curenz = 7
  INTEGER, PARAMETER :: idr_oceco2 = 8
  ! bulk salinity of the surface layer of the ocean, in ppt
  INTEGER, PARAMETER :: idr_sss = 9
  INTEGER, PARAMETER :: idr_ocedms = 10
  INTEGER, PARAMETER :: idr_ocen2o = 11

  INTEGER, PARAMETER :: maxrecv = 11     ! Maximum number of fields to receive
  INTEGER, PARAMETER :: maxrecv_phys = 9      ! Maximum number of fields to receive in physiq (without fields received in INCA model )
  ! will be changed in next version - INCA fields will be received in LMDZ (like for ORCHIDEE fields)
  ! and then send by routine in INCA model

  TYPE, PUBLIC :: FLD_CPL            ! Type for coupling field information
    CHARACTER(len = 8) :: name      ! Name of the coupling field
    LOGICAL :: action    ! To be exchanged or not
    INTEGER :: nid       ! Id of the field
  END TYPE FLD_CPL

  TYPE(FLD_CPL), DIMENSION(maxsend), SAVE, PUBLIC :: infosend   ! Information for sending coupling fields
  !$OMP THREADPRIVATE(infosend)
  TYPE(FLD_CPL), DIMENSION(maxrecv), SAVE, PUBLIC :: inforecv   ! Information for receiving coupling fields
  !$OMP THREADPRIVATE(inforecv)

  LOGICAL, SAVE :: cpl_current
  !$OMP THREADPRIVATE(cpl_current)

#ifdef CPP_COUPLE

CONTAINS

  SUBROUTINE inicma
!************************************************************************************
!**** *INICMA*  - Initialize coupled mode communication for atmosphere
!                 and exchange some initial information with Oasis

!     Rewrite to take the PRISM/psmile library into account
!     LF 09/2003

    USE IOIPSL
    USE surface_data, ONLY: version_ocean
    USE carbon_cycle_mod, ONLY: carbon_cycle_cpl
    USE lmdz_wxios, ONLY: wxios_context_init
    USE chemistry_cycle_mod, ONLY: dms_cycle_cpl, n2o_cycle_cpl
    USE lmdz_xios  
    USE lmdz_print_control, ONLY: lunout
    USE lmdz_grid_phy, ONLY: nbp_lon, nbp_lat, grid_type, unstructured, regular_lonlat
    USE lmdz_geometry, ONLY: ind_cell_glo
    USE lmdz_phys_mpi_data, ONLY: klon_mpi_para_nb
    USE config_ocean_skin_m, ONLY: activate_ocean_skin
    USE lmdz_abort_physic, ONLY: abort_physic

! Local variables
!************************************************************************************
    INTEGER                            :: comp_id
    INTEGER                            :: ierror, il_commlocal
    INTEGER                            :: il_part_id
    INTEGER, ALLOCATABLE               :: ig_paral(:)
    INTEGER, DIMENSION(2)              :: il_var_nodims
    INTEGER, DIMENSION(4)              :: il_var_actual_shape
    INTEGER                            :: il_var_type
    INTEGER                            :: jf
    CHARACTER (len = 6)                :: clmodnam
    CHARACTER (len = 20)               :: modname = 'inicma'
    CHARACTER (len = 80)               :: abort_message 
    LOGICAL, SAVE                      :: cpl_current_omp
    INTEGER, DIMENSION(klon_mpi)       :: ind_cell_glo_mpi

!*    1. Initializations
!        ---------------
!************************************************************************************
    WRITE(lunout,*) ' '
    WRITE(lunout,*) ' '
    WRITE(lunout,*) ' ROUTINE INICMA'
    WRITE(lunout,*) ' **************'
    WRITE(lunout,*) ' '
    WRITE(lunout,*) ' '

! Define the model name

    IF (grid_type==unstructured) THEN
        clmodnam = 'icosa'                 ! as in $NBMODEL in Cpl/Nam/namcouple.tmp
    ELSE IF (grid_type==regular_lonlat) THEN
        clmodnam = 'LMDZ'                  ! as in $NBMODEL in Cpl/Nam/namcouple.tmp
    ELSE
	abort_message='Pb : type of grid unknown'
	CALL abort_physic(modname,abort_message,1)
    ENDIF


!************************************************************************************
! Define if coupling ocean currents or not
!************************************************************************************
!$OMP MASTER
    cpl_current_omp = .FALSE.
    CALL getin('cpl_current', cpl_current_omp)
!$OMP END MASTER
!$OMP BARRIER
    cpl_current = cpl_current_omp
    WRITE(lunout,*) 'Couple ocean currents, cpl_current = ',cpl_current 

!************************************************************************************
! Gather global index to be used for oasis decomposition
!************************************************************************************
    CALL gather_omp(ind_cell_glo,ind_cell_glo_mpi)

!************************************************************************************
! Define coupling variables
!************************************************************************************

! Atmospheric variables to send

!$OMP MASTER
    infosend(:)%action = .FALSE.

    infosend(ids_tauxxu)%action = .TRUE. ; infosend(ids_tauxxu)%name = 'COTAUXXU'
    infosend(ids_tauyyu)%action = .TRUE. ; infosend(ids_tauyyu)%name = 'COTAUYYU'
    infosend(ids_tauzzu)%action = .TRUE. ; infosend(ids_tauzzu)%name = 'COTAUZZU'
    infosend(ids_tauxxv)%action = .TRUE. ; infosend(ids_tauxxv)%name = 'COTAUXXV'
    infosend(ids_tauyyv)%action = .TRUE. ; infosend(ids_tauyyv)%name = 'COTAUYYV'
    infosend(ids_tauzzv)%action = .TRUE. ; infosend(ids_tauzzv)%name = 'COTAUZZV'
    infosend(ids_windsp)%action = .TRUE. ; infosend(ids_windsp)%name = 'COWINDSP'
    infosend(ids_shfice)%action = .TRUE. ; infosend(ids_shfice)%name = 'COSHFICE'
    infosend(ids_nsfice)%action = .TRUE. ; infosend(ids_nsfice)%name = 'CONSFICE'
    infosend(ids_dflxdt)%action = .TRUE. ; infosend(ids_dflxdt)%name = 'CODFLXDT'
    infosend(ids_calvin)%action = .TRUE. ; infosend(ids_calvin)%name = 'COCALVIN'
    
    IF (activate_ocean_skin == 2) THEN
       infosend(ids_delta_sst)%action = .TRUE.
       infosend(ids_delta_sst)%name = 'CODELSST'
       infosend(ids_delta_sal)%action = .TRUE.
       infosend(ids_delta_sal)%name = 'CODELSSS'
       infosend(ids_dter)%action = .TRUE.
       infosend(ids_dter)%name = 'CODELTER'
       infosend(ids_dser)%action = .TRUE.
       infosend(ids_dser)%name = 'CODELSER'
       infosend(ids_dt_ds)%action = .TRUE.
       infosend(ids_dt_ds)%name = 'CODTDS'
    end if
           
    IF (version_ocean=='nemo') THEN
        infosend(ids_shftot)%action = .TRUE. ; infosend(ids_shftot)%name = 'COQSRMIX'
        infosend(ids_nsftot)%action = .TRUE. ; infosend(ids_nsftot)%name = 'COQNSMIX'
        infosend(ids_totrai)%action = .TRUE. ; infosend(ids_totrai)%name = 'COTOTRAI'
        infosend(ids_totsno)%action = .TRUE. ; infosend(ids_totsno)%name = 'COTOTSNO'
        infosend(ids_toteva)%action = .TRUE. ; infosend(ids_toteva)%name = 'COTOTEVA'
        infosend(ids_icevap)%action = .TRUE. ; infosend(ids_icevap)%name = 'COICEVAP'
        infosend(ids_liqrun)%action = .TRUE. ; infosend(ids_liqrun)%name = 'COLIQRUN'
        infosend(ids_taumod)%action = .TRUE. ; infosend(ids_taumod)%name = 'COTAUMOD'
        IF (carbon_cycle_cpl) THEN
            infosend(ids_atmco2)%action = .TRUE. ; infosend(ids_atmco2)%name = 'COATMCO2'
        ENDIF
        infosend(ids_qraioc)%action = .TRUE. ; infosend(ids_qraioc)%name = 'COQRAIOC'
        infosend(ids_qsnooc)%action = .TRUE. ; infosend(ids_qsnooc)%name = 'COQSNOOC'
        infosend(ids_qraiic)%action = .TRUE. ; infosend(ids_qraiic)%name = 'COQRAIIC'
        infosend(ids_qsnoic)%action = .TRUE. ; infosend(ids_qsnoic)%name = 'COQSNOIC'
        
    ELSE IF (version_ocean=='opa8') THEN
        infosend(ids_shfoce)%action = .TRUE. ; infosend(ids_shfoce)%name = 'COSHFOCE'
        infosend(ids_nsfoce)%action = .TRUE. ; infosend(ids_nsfoce)%name = 'CONSFOCE'
        infosend(ids_icevap)%action = .TRUE. ; infosend(ids_icevap)%name = 'COTFSICE'
        infosend(ids_ocevap)%action = .TRUE. ; infosend(ids_ocevap)%name = 'COTFSOCE'
        infosend(ids_totrai)%action = .TRUE. ; infosend(ids_totrai)%name = 'COTOLPSU'
        infosend(ids_totsno)%action = .TRUE. ; infosend(ids_totsno)%name = 'COTOSPSU'
        infosend(ids_runcoa)%action = .TRUE. ; infosend(ids_runcoa)%name = 'CORUNCOA'
        infosend(ids_rivflu)%action = .TRUE. ; infosend(ids_rivflu)%name = 'CORIVFLU'
   ENDIF
        
! Oceanic variables to receive

   inforecv(:)%action = .FALSE.

   inforecv(idr_sisutw)%action = .TRUE. ; inforecv(idr_sisutw)%name = 'SISUTESW'
   inforecv(idr_icecov)%action = .TRUE. ; inforecv(idr_icecov)%name = 'SIICECOV'
   inforecv(idr_icealw)%action = .TRUE. ; inforecv(idr_icealw)%name = 'SIICEALW'
   inforecv(idr_icetem)%action = .TRUE. ; inforecv(idr_icetem)%name = 'SIICTEMW'

   IF (activate_ocean_skin >= 1) THEN
      inforecv(idr_sss)%action = .TRUE.
      inforecv(idr_sss)%name = 'SISUSALW'
   end if
   
   IF (cpl_current ) THEN
       inforecv(idr_curenx)%action = .TRUE. ; inforecv(idr_curenx)%name = 'CURRENTX'
       inforecv(idr_cureny)%action = .TRUE. ; inforecv(idr_cureny)%name = 'CURRENTY'
       inforecv(idr_curenz)%action = .TRUE. ; inforecv(idr_curenz)%name = 'CURRENTZ'
   ENDIF

   IF (carbon_cycle_cpl ) THEN
       inforecv(idr_oceco2)%action = .TRUE. ; inforecv(idr_oceco2)%name = 'SICO2FLX'
   ENDIF
   IF (dms_cycle_cpl) THEN 
      inforecv(idr_ocedms)%action = .TRUE. ; inforecv(idr_ocedms)%name = 'SIDMSFLX'
   ENDIF
   IF (n2o_cycle_cpl) THEN 
      inforecv(idr_ocen2o)%action = .TRUE. ; inforecv(idr_ocen2o)%name = 'SIN2OFLX'
   ENDIF
 

!************************************************************************************
! Here we go: psmile initialisation
!************************************************************************************
    IF (is_sequential) THEN
       CALL prism_init_comp_proto (comp_id, clmodnam, ierror)
       
       IF (ierror .NE. PRISM_Ok) THEN
          abort_message=' Probleme init dans prism_init_comp '
          CALL abort_physic(modname,abort_message,1)
       ELSE
          WRITE(lunout,*) 'inicma : init psmile ok '
       ENDIF
    ENDIF

    CALL prism_get_localcomm_proto (il_commlocal, ierror)
!************************************************************************************
! Domain decomposition
!************************************************************************************
    IF (grid_type==unstructured) THEN

      ALLOCATE( ig_paral(klon_mpi_para_nb(mpi_rank) + 2) ) 

      ig_paral(1) = 4                                      ! points partition for //
      ig_paral(2) = klon_mpi_para_nb(mpi_rank)             ! nb of local cells

      DO jf=1, klon_mpi_para_nb(mpi_rank)
        ig_paral(2+jf) = ind_cell_glo_mpi(jf)
      ENDDO

    ELSE IF (grid_type==regular_lonlat) THEN

      ALLOCATE( ig_paral(3) )

      ig_paral(1) = 1                            ! apple partition for //
      ig_paral(2) = (jj_begin-1)*nbp_lon+ii_begin-1  ! offset
      ig_paral(3) = (jj_end*nbp_lon+ii_end) - (jj_begin*nbp_lon+ii_begin) + 1

      IF (mpi_rank==mpi_size-1) ig_paral(3)=ig_paral(3)+nbp_lon-1
    ELSE
      abort_message='Pb : type of grid unknown'
      CALL abort_physic(modname,abort_message,1)
    ENDIF


    WRITE(lunout,*) mpi_rank,'ig_paral--->',ig_paral(2),ig_paral(3)
    
    ierror=PRISM_Ok
    CALL prism_def_partition_proto (il_part_id, ig_paral, ierror)

    IF (ierror .NE. PRISM_Ok) THEN
       abort_message=' Probleme dans prism_def_partition '
       CALL abort_physic(modname,abort_message,1)
    ELSE
       WRITE(lunout,*) 'inicma : decomposition domaine psmile ok '
    ENDIF

    il_var_nodims(1) = 2                        ! rank of field array (1d or 2d)
    il_var_nodims(2) = 1                        ! always 1 in current oasis version" doc oasis3mct p18

    il_var_actual_shape(1) = 1                  ! min of 1st dimension (always 1)
    il_var_actual_shape(2) = nbp_lon            ! max of 1st dimension
    il_var_actual_shape(3) = 1                  ! min of 2nd dimension (always 1)
    il_var_actual_shape(4) = nbp_lat            ! max of 2nd dimension
   
    il_var_type = PRISM_Real

!************************************************************************************
! Oceanic Fields to receive
! Loop over all possible variables
!************************************************************************************
    DO jf=1, maxrecv
       IF (inforecv(jf)%action) THEN
          CALL prism_def_var_proto(inforecv(jf)%nid, inforecv(jf)%name, il_part_id, &
               il_var_nodims, PRISM_In, il_var_actual_shape, il_var_type, &
               ierror)
          IF (ierror .NE. PRISM_Ok) THEN
             WRITE(lunout,*) 'inicma : Problem with prism_def_var_proto for field : ',&
                  inforecv(jf)%name
             abort_message=' Problem in CALL to prism_def_var_proto for fields to receive'
             CALL abort_physic(modname,abort_message,1)
          ENDIF
       ENDIF
    END DO


    IF (dms_cycle_cpl .OR. n2o_cycle_cpl) THEN
       CALL init_inca_oasis(inforecv(idr_ocedms:idr_ocen2o))
    ENDIF

!************************************************************************************
! Atmospheric Fields to send
! Loop over all possible variables
!************************************************************************************
    DO jf=1,maxsend
       IF (infosend(jf)%action) THEN
          CALL prism_def_var_proto(infosend(jf)%nid, infosend(jf)%name, il_part_id, &
               il_var_nodims, PRISM_Out, il_var_actual_shape, il_var_type, &
               ierror)
          IF (ierror .NE. PRISM_Ok) THEN
             WRITE(lunout,*) 'inicma : Problem with prism_def_var_proto for field : ',&
                  infosend(jf)%name
             abort_message=' Problem in CALL to prism_def_var_proto for fields to send'
             CALL abort_physic(modname,abort_message,1)
          ENDIF
       ENDIF
    END DO
    
!************************************************************************************
! End definition
!************************************************************************************

    IF (using_xios) CALL xios_oasis_enddef()

    CALL prism_enddef_proto(ierror)
    IF (ierror .NE. PRISM_Ok) THEN
       abort_message=' Problem in CALL to prism_endef_proto'
       CALL abort_physic(modname,abort_message,1)
    ELSE
       WRITE(lunout,*) 'inicma : endef psmile ok '
    ENDIF

!$OMP END MASTER
    
  END SUBROUTINE inicma

!************************************************************************************

  SUBROUTINE fromcpl(ktime, tab_get)
! ======================================================================
! L. Fairhead (09/2003) adapted From L.Z.X Li: this SUBROUTINE reads the SST
! and Sea-Ice provided by the coupler. Adaptation to psmile library
!======================================================================

    USE lmdz_print_control, ONLY: lunout
    USE lmdz_grid_phy, ONLY: nbp_lon, nbp_lat
    USE lmdz_abort_physic, ONLY: abort_physic
! Input arguments
!************************************************************************************
    INTEGER, INTENT(IN)                               ::  ktime

! Output arguments
!************************************************************************************
    REAL, DIMENSION(nbp_lon, jj_nb,maxrecv_phys), INTENT(OUT) :: tab_get

! Local variables
!************************************************************************************
    INTEGER                       :: ierror, i
    INTEGER                       :: istart,iend
    CHARACTER (len = 20)          :: modname = 'fromcpl'
    CHARACTER (len = 80)          :: abort_message 
    REAL, DIMENSION(nbp_lon*jj_nb)    :: field

!************************************************************************************
    WRITE (lunout,*) ' '
    WRITE (lunout,*) 'Fromcpl: Reading fields from CPL, ktime=',ktime
    WRITE (lunout,*) ' '
    
    istart=ii_begin
    IF (is_south_pole_dyn) THEN
       iend=(jj_end-jj_begin)*nbp_lon+nbp_lon
    ELSE
       iend=(jj_end-jj_begin)*nbp_lon+ii_end
    ENDIF
    
    DO i = 1, maxrecv_phys
      IF (inforecv(i)%action .AND. inforecv(i)%nid .NE. -1) THEN
          field(:) = -99999.
          CALL prism_get_proto(inforecv(i)%nid, ktime, field(istart:iend), ierror)
          tab_get(:,:,i) = RESHAPE(field(:),(/nbp_lon,jj_nb/))
       
          IF (ierror .NE. PRISM_Ok .AND. ierror.NE.PRISM_Recvd .AND. &
             ierror.NE.PRISM_FromRest &
             .AND. ierror.NE.PRISM_Input .AND. ierror.NE.PRISM_RecvOut &
             .AND. ierror.NE.PRISM_FromRestOut) THEN
              WRITE (lunout,*)  'Error with receiving filed : ', inforecv(i)%name, ktime   
              abort_message=' Problem in prism_get_proto '
              CALL abort_physic(modname,abort_message,1)
          ENDIF
      ENDIF
    END DO
    
    
  END SUBROUTINE fromcpl

!************************************************************************************

  SUBROUTINE intocpl(ktime, last, tab_put) 
! ======================================================================
! L. Fairhead (09/2003) adapted From L.Z.X Li: this SUBROUTINE provides the
! atmospheric coupling fields to the coupler with the psmile library.
! IF last time step, writes output fields to binary files.
! ======================================================================


    USE lmdz_print_control, ONLY: lunout
    USE lmdz_grid_phy, ONLY: nbp_lon, nbp_lat
    USE lmdz_abort_physic, ONLY: abort_physic
! Input arguments
!************************************************************************************
    INTEGER, INTENT(IN)                              :: ktime
    LOGICAL, INTENT(IN)                              :: last
    REAL, DIMENSION(nbp_lon, jj_nb, maxsend), INTENT(IN) :: tab_put

! Local variables
!************************************************************************************
    LOGICAL                          :: checkout
    INTEGER                          :: istart,iend
    INTEGER                          :: wstart,wend
    INTEGER                          :: ierror, i
    REAL, DIMENSION(nbp_lon*jj_nb)       :: field
    CHARACTER (len = 20),PARAMETER   :: modname = 'intocpl'
    CHARACTER (len = 80)             :: abort_message 

!************************************************************************************
    checkout=.FALSE.

    WRITE(lunout,*) ' '
    WRITE(lunout,*) 'Intocpl: sending fields to CPL, ktime= ', ktime
    WRITE(lunout,*) 'last = ', last
    WRITE(lunout,*)


    istart=ii_begin
    IF (is_south_pole_dyn) THEN
       iend=(jj_end-jj_begin)*nbp_lon+nbp_lon
    ELSE
       iend=(jj_end-jj_begin)*nbp_lon+ii_end
    ENDIF
    
    IF (checkout) THEN   
       wstart=istart
       wend=iend
       IF (is_north_pole_dyn) wstart=istart+nbp_lon-1
       IF (is_south_pole_dyn) wend=iend-nbp_lon+1
       
       DO i = 1, maxsend
          IF (infosend(i)%action) THEN
             field = RESHAPE(tab_put(:,:,i),(/nbp_lon*jj_nb/))
             CALL writefield_phy(infosend(i)%name,field(wstart:wend),1)
          END IF
       END DO
    END IF

!************************************************************************************
! PRISM_PUT
!************************************************************************************

    DO i = 1, maxsend
      IF (infosend(i)%action .AND. infosend(i)%nid .NE. -1 ) THEN
          field = RESHAPE(tab_put(:,:,i),(/nbp_lon*jj_nb/))
          CALL prism_put_proto(infosend(i)%nid, ktime, field(istart:iend), ierror)
          
          IF (ierror .NE. PRISM_Ok .AND. ierror.NE.PRISM_Sent .AND. ierror.NE.PRISM_ToRest &
             .AND. ierror.NE.PRISM_LocTrans .AND. ierror.NE.PRISM_Output .AND. &
             ierror.NE.PRISM_SentOut .AND. ierror.NE.PRISM_ToRestOut) THEN
              WRITE (lunout,*) 'Error with sending field :', infosend(i)%name, ktime   
              abort_message=' Problem in prism_put_proto '
              CALL abort_physic(modname,abort_message,1)
          ENDIF
      ENDIF
    END DO
   
!************************************************************************************
! Finalize PSMILE for the case is_sequential, if parallel finalization is done 
! from Finalize_parallel in dyn3dpar/parallel.F90
!************************************************************************************

    IF (last) THEN
       IF (is_sequential) THEN 
          CALL prism_terminate_proto(ierror)
          IF (ierror .NE. PRISM_Ok) THEN
             abort_message=' Problem in prism_terminate_proto '
             CALL abort_physic(modname,abort_message,1)
          ENDIF
       ENDIF
    ENDIF
    
    
  END SUBROUTINE intocpl

#endif

END MODULE oasis