! $Header$ SUBROUTINE convect3(dtime, epmax, ok_adj, t1, r1, rs, u, v, tra, p, ph, nd, & ndp1, nl, ntra, delt, iflag, ft, fr, fu, fv, ftra, precip, icb, inb, & upwd, dnwd, dnwd0, sig, w0, mike, mke, ma, ments, qents, tps, tls, sigij, & cape, tvp, pbase, buoybase, & ! ccc * ! DTVPDT1,DTVPDQ1,DPLCLDT,DPLCLDR) dtvpdt1, dtvpdq1, dplcldt, dplcldr, & ! sbl ft2, fr2, fu2, fv2, wd, qcond, qcondc) ! sbl ! *** THE PARAMETER NA SHOULD IN GENERAL EQUAL ND *** ! ################################################################# ! Fleur Introduction des traceurs dans convect3 le 6 juin 200 ! ################################################################# USE dimphy USE infotrac_phy, ONLY: nbtr IMPLICIT NONE INTEGER na PARAMETER (na=60) REAL deltac ! cld PARAMETER (deltac=0.01) ! cld INTEGER nent(na) INTEGER nd, ndp1, nl, ntra, iflag, icb, inb REAL dtime, epmax, delt, precip, cape REAL dplcldt, dplcldr REAL t1(nd), r1(nd), rs(nd), u(nd), v(nd), tra(nd, ntra) REAL p(nd), ph(ndp1) REAL ft(nd), fr(nd), fu(nd), fv(nd), ftra(nd, ntra) REAL sig(nd), w0(nd) REAL uent(na, na), vent(na, na), traent(na, na, nbtr), tratm(na) REAL up(na), vp(na), trap(na, nbtr) REAL m(na), mp(na), ment(na, na), qent(na, na), elij(na, na) REAL sij(na, na), tvp(na), tv(na), water(na) REAL rp(na), ep(na), th(na), wt(na), evap(na), clw(na) REAL sigp(na), b(na), tp(na), cpn(na) REAL lv(na), lvcp(na), h(na), hp(na), gz(na) REAL t(na), rr(na) REAL ft2(nd), fr2(nd), fu2(nd), fv2(nd) ! added sbl REAL u1(nd), v1(nd) ! added sbl REAL buoy(na) ! Lifted parcel buoyancy REAL dtvpdt1(nd), dtvpdq1(nd) ! Derivatives of parcel virtual ! temperature wrt T1 and Q1 REAL clw_new(na), qi(na) REAL wd, betad ! for gust factor (sb) REAL qcondc(nd) ! interface cld param (sb) REAL qcond(nd), nqcond(na), wa(na), maa(na), siga(na), axc(na) ! cld LOGICAL ice_conv, ok_adj PARAMETER (ice_conv=.TRUE.) ! ccccccccccccccccccccccccccccccccccccccccccccc ! declaration des variables a sortir ! cccccccccccccccccccccccccccccccccccccccccccc REAL mke(nd) REAL mike(nd) REAL ma(nd) REAL tps(nd) !temperature dans les ascendances non diluees REAL tls(nd) !temperature potentielle REAL ments(nd, nd) REAL qents(nd, nd) REAL sigij(klev, klev) REAL pbase ! pressure at the cloud base level REAL buoybase ! buoyancy at the cloud base level ! ccccccccccccccccccccccccccccccccccccccccccccc REAL :: cpv,cl,cpvmcl,eps,alv0,rdcp,pbcrit,ptcrit,sigd,spfac REAL :: tau,beta,alpha,dtcrit,dtovsh,ahm,rm,um,vm,dphinv REAL :: a2,x,tvx,tvy,plcl,pden,dpbase,tvpbase,tvbase,tdif REAL :: ath1,ath,delti,deltap,dcape,dlnp,sigold,dtmin,fac,w REAL :: amu,rti,cpd,bf2,anum,denom,dei,altem,cwat,stemp,qp REAL :: scrit,alt,smax,asij,wgh,sjmax,sjmin,smid,delp,delm REAL :: asum,bsum,csum,wflux,tinv,wdtrain,awat,afac,afac1,afac2 REAL :: bfac,pr1,pr2,sigt,b6,c6,revap,tevap,delth,amfac,amp2 REAL :: xf,tf,af,bf,fac2,ur,sru,d,ampmax,dpinv,am,amde,cpinv REAL :: amp1,ad,rat,ax,bx,cx,dx,ex,dsum INTEGER :: nk,i,j,nopt,jn,k,im,jm,n REAL dnwd0(nd) ! precipitation driven unsaturated downdraft flux REAL dnwd(nd), dn1 ! in-cloud saturated downdraft mass flux REAL upwd(nd), up1 ! in-cloud saturated updraft mass flux ! *** ASSIGN VALUES OF THERMODYNAMIC CONSTANTS *** ! *** THESE SHOULD BE CONSISTENT WITH *** ! *** THOSE USED IN CALLING PROGRAM *** ! *** NOTE: THESE ARE ALSO SPECIFIED IN SUBROUTINE TLIFT *** ! sb CPD=1005.7 ! sb CPV=1870.0 ! sb CL=4190.0 ! sb CPVMCL=CL-CPV ! sb RV=461.5 ! sb RD=287.04 ! sb EPS=RD/RV ! sb ALV0=2.501E6 ! cccccccccccccccccccccc ! constantes coherentes avec le modele du Centre Europeen ! sb RD = 1000.0 * 1.380658E-23 * 6.0221367E+23 / 28.9644 ! sb RV = 1000.0 * 1.380658E-23 * 6.0221367E+23 / 18.0153 ! sb CPD = 3.5 * RD ! sb CPV = 4.0 * RV ! sb CL = 4218.0 ! sb CPVMCL=CL-CPV ! sb EPS=RD/RV ! sb ALV0=2.5008E+06 ! ccccccccccccccccccccc ! on utilise les constantes thermo du Centre Europeen: (SB) include "YOMCST.h" cpd = rcpd cpv = rcpv cl = rcw cpvmcl = cl - cpv eps = rd/rv alv0 = rlvtt nk = 1 ! origin level of the lifted parcel ! ccccccccccccccccccccc ! *** INITIALIZE OUTPUT ARRAYS AND PARAMETERS *** DO i = 1, nd ft(i) = 0.0 fr(i) = 0.0 fu(i) = 0.0 fv(i) = 0.0 ft2(i) = 0.0 fr2(i) = 0.0 fu2(i) = 0.0 fv2(i) = 0.0 DO j = 1, ntra ftra(i, j) = 0.0 END DO qcondc(i) = 0.0 ! cld qcond(i) = 0.0 ! cld nqcond(i) = 0.0 ! cld t(i) = t1(i) rr(i) = r1(i) u1(i) = u(i) ! added sbl v1(i) = v(i) ! added sbl END DO DO i = 1, nl rdcp = (rd*(1.-rr(i))+rr(i)*rv)/(cpd*(1.-rr(i))+rr(i)*cpv) th(i) = t(i)*(1000.0/p(i))**rdcp END DO ! ************************************************************ ! * CALCUL DES TEMPERATURES POTENTIELLES A SORTIR ! ************************************************************ DO i = 1, nd rdcp = (rd*(1.-rr(i))+rr(i)*rv)/(cpd*(1.-rr(i))+rr(i)*cpv) tls(i) = t(i)*(1000.0/p(i))**rdcp END DO ! *********************************************************** precip = 0.0 wd = 0.0 ! sb iflag = 1 ! *** SPECIFY PARAMETERS *** ! *** PBCRIT IS THE CRITICAL CLOUD DEPTH (MB) BENEATH WHICH THE *** ! *** PRECIPITATION EFFICIENCY IS ASSUMED TO BE ZERO *** ! *** PTCRIT IS THE CLOUD DEPTH (MB) ABOVE WHICH THE PRECIP. *** ! *** EFFICIENCY IS ASSUMED TO BE UNITY *** ! *** SIGD IS THE FRACTIONAL AREA COVERED BY UNSATURATED DNDRAFT *** ! *** SPFAC IS THE FRACTION OF PRECIPITATION FALLING OUTSIDE *** ! *** OF CLOUD *** ! *** ALPHA AND BETA ARE PARAMETERS THAT CONTROL THE RATE OF *** ! *** APPROACH TO QUASI-EQUILIBRIUM *** ! *** (THEIR STANDARD VALUES ARE 1.0 AND 0.96, RESPECTIVELY) *** ! *** (BETA MUST BE LESS THAN OR EQUAL TO 1) *** ! *** DTCRIT IS THE CRITICAL BUOYANCY (K) USED TO ADJUST THE *** ! *** APPROACH TO QUASI-EQUILIBRIUM *** ! *** IT MUST BE LESS THAN 0 *** pbcrit = 150.0 ptcrit = 500.0 sigd = 0.01 spfac = 0.15 ! sb: ! EPMAX=0.993 ! precip efficiency less than unity ! EPMAX=1. ! precip efficiency less than unity ! jyg ! CC BETA=0.96 ! Beta is now expressed as a function of the characteristic time ! of the convective process. ! CC Old value : TAU = 15000. !(for dtime = 600.s) ! CC Other value (inducing little change) :TAU = 8000. tau = 8000. beta = 1. - dtime/tau ! jyg ! CC ALPHA=1.0 alpha = 1.5E-3*dtime/tau ! Increase alpha in order to compensate W decrease alpha = alpha*1.5 ! jyg (voir CONVECT 3) ! CC DTCRIT=-0.2 dtcrit = -2. ! gf&jyg ! CC DT pour l'overshoot. dtovsh = -0.2 ! *** INCREMENT THE COUNTER *** sig(nd) = sig(nd) + 1.0 sig(nd) = amin1(sig(nd), 12.1) ! *** IF NOPT IS AN INTEGER OTHER THAN 0, CONVECT *** ! *** RETURNS ARRAYS T AND R THAT MAY HAVE BEEN *** ! *** ALTERED BY DRY ADIABATIC ADJUSTMENT; OTHERWISE *** ! *** THE RETURNED ARRAYS ARE UNALTERED. *** nopt = 0 ! NOPT=1 ! sbl ! *** PERFORM DRY ADIABATIC ADJUSTMENT *** ! *** DO NOT BYPASS THIS EVEN IF THE CALLING PROGRAM HAS A *** ! *** BOUNDARY LAYER SCHEME !!! *** IF (ok_adj) THEN ! added sbl DO i = nl - 1, 1, -1 jn = 0 DO j = i + 1, nl IF (th(j)=2000.0) THEN iflag = 2 RETURN END IF ! jyg1 ! Essais de modification de ICB ! *** CALCULATE FIRST LEVEL ABOVE LCL (=ICB) *** ! C ICB=NL-1 ! C DO 50 I=2,NL-1 ! C IF(P(I).LT.PLCL)THEN ! C ICB=MIN(ICB,I) ! ICB sup ou egal a 2 ! C END IF ! C 50 CONTINUE ! C IF(ICB.EQ.(NL-1))THEN ! C IFLAG=3 ! C RETURN ! C END IF ! *** CALCULATE LAYER CONTAINING LCL (=ICB) *** icb = nl - 1 ! sb DO 50 I=2,NL-1 DO i = 3, nl - 1 ! modif sb pour que ICB soit sup/egal a 2 ! la modification consiste a comparer PLCL a PH et non a P: ! ICB est defini par : PH(ICB)p(icb)) THEN ! sb CALL TLIFT(P,T,RR,RS,GZ,PLCL,ICB,TVP,TP,CLW,ND,NL) CALL tlift(p, t, rr, rs, gz, plcl, icb, nk, tvp, tp, clw, nd, nl, & dtvpdt1, dtvpdq1) ELSE ! sb CALL TLIFT(P,T,RR,RS,GZ,PLCL,ICB+1,TVP,TP,CLW,ND,NL) CALL tlift(p, t, rr, rs, gz, plcl, icb+1, nk, tvp, tp, clw, nd, nl, & dtvpdt1, dtvpdq1) END IF ! jyg2 ! ***************************************************************************** ! *** SORTIE DE LA TEMPERATURE DE L ASCENDANCE NON DILUE ! ***************************************************************************** DO i = 1, nd tps(i) = tp(i) END DO ! ***************************************************************************** ! *** SET THE PRECIPITATION EFFICIENCIES AND THE FRACTION OF *** ! *** PRECIPITATION FALLING OUTSIDE OF CLOUD *** ! *** THESE MAY BE FUNCTIONS OF TP(I), P(I) AND CLW(I) *** DO i = 1, nl pden = ptcrit - pbcrit ! jyg ! cc EP(I)=(P(ICB)-P(I)-PBCRIT)/PDEN ! sb EP(I)=(PLCL-P(I)-PBCRIT)/PDEN ep(i) = (plcl-p(i)-pbcrit)/pden*epmax ! sb ep(i) = amax1(ep(i), 0.0) ! sb EP(I)=AMIN1(EP(I),1.0) ep(i) = amin1(ep(i), epmax) ! sb sigp(i) = spfac ! *** CALCULATE VIRTUAL TEMPERATURE AND LIFTED PARCEL *** ! *** VIRTUAL TEMPERATURE *** tv(i) = t(i)*(1.+rr(i)/eps-rr(i)) ! cd1 ! . Keep all liquid water in lifted parcel (-> adiabatic CAPE) ! cc TVP(I)=TVP(I)-TP(I)*(RR(1)-EP(I)*CLW(I)) ! !!! sb TVP(I)=TVP(I)-TP(I)*RR(1) ! calcule dans tlift ! cd2 ! *** Calculate first estimate of buoyancy buoy(i) = tvp(i) - tv(i) END DO ! *** Set Cloud Base Buoyancy at (Plcl+DPbase) level buoyancy dpbase = -40. !That is 400m above LCL pbase = plcl + dpbase tvpbase = tvp(icb)*(pbase-p(icb+1))/(p(icb)-p(icb+1)) + & tvp(icb+1)*(p(icb)-pbase)/(p(icb)-p(icb+1)) tvbase = tv(icb)*(pbase-p(icb+1))/(p(icb)-p(icb+1)) + & tv(icb+1)*(p(icb)-pbase)/(p(icb)-p(icb+1)) ! test sb: ! @ WRITE(*,*) '++++++++++++++++++++++++++++++++++++++++' ! @ WRITE(*,*) 'plcl,dpbas,tvpbas,tvbas,tvp(icb),tvp(icb1) ! @ : ,tv(icb),tv(icb1)' ! @ WRITE(*,*) plcl,dpbase,tvpbase,tvbase,tvp(icb) ! @ L ,tvp(icb+1),tv(icb),tv(icb+1) ! @ WRITE(*,*) '++++++++++++++++++++++++++++++++++++++++' ! fin test sb buoybase = tvpbase - tvbase ! C Set buoyancy = BUOYBASE for all levels below BASE. ! C For safety, set : BUOY(ICB) = BUOYBASE DO i = icb, nl IF (p(i)>=pbase) THEN buoy(i) = buoybase END IF END DO buoy(icb) = buoybase ! sb3d print *,'buoybase,tvp_tv,tvpbase,tvbase,pbase,plcl' ! sb3d $, buoybase,tvp(icb)-tv(icb),tvpbase,tvbase,pbase,plcl ! sb3d print *,'TVP ',(tvp(i),i=1,nl) ! sb3d print *,'TV ',(tv(i),i=1,nl) ! sb3d print *, 'P ',(p(i),i=1,nl) ! sb3d print *,'ICB ',icb ! test sb: ! @ WRITE(*,*) '@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@' ! @ WRITE(*,*) 'icb,icbs,inb,buoybase:' ! @ WRITE(*,*) icb,icb+1,inb,buoybase ! @ WRITE(*,*) 'k,tvp,tv,tp,buoy,ep: ' ! @ do k=1,nl ! @ WRITE(*,*) k,tvp(k),tv(k),tp(k),buoy(k),ep(k) ! @ enddo ! @ WRITE(*,*) '@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@' ! fin test sb ! *** MAKE SURE THAT COLUMN IS DRY ADIABATIC BETWEEN THE SURFACE *** ! *** AND CLOUD BASE, AND THAT LIFTED AIR IS POSITIVELY BUOYANT *** ! *** AT CLOUD BASE *** ! *** IF NOT, RETURN TO CALLING PROGRAM AFTER RESETTING *** ! *** SIG(I) AND W0(I) *** ! jyg ! CC TDIF=TVP(ICB)-TV(ICB) tdif = buoy(icb) ath1 = th(1) ! jyg ! CC ATH=TH(ICB-1)-1.0 ath = th(icb-1) - 5.0 ! ATH=0. ! ajout sb ! IF (ICB.GT.1) ATH=TH(ICB-1)-5.0 ! modif sb IF (tdifath1) THEN DO i = 1, nl sig(i) = beta*sig(i) - 2.*alpha*tdif*tdif sig(i) = amax1(sig(i), 0.0) w0(i) = beta*w0(i) END DO iflag = 0 RETURN END IF ! *** IF THIS POINT IS REACHED, MOIST CONVECTIVE ADJUSTMENT IS NECESSARY ! *** ! *** NOW INITIALIZE VARIOUS ARRAYS USED IN THE COMPUTATIONS ! *** DO i = 1, nl hp(i) = h(i) wt(i) = 0.001 rp(i) = rr(i) up(i) = u(i) vp(i) = v(i) DO j = 1, ntra trap(i, j) = tra(i, j) END DO nent(i) = 0 water(i) = 0.0 evap(i) = 0.0 b(i) = 0.0 mp(i) = 0.0 m(i) = 0.0 lv(i) = alv0 - cpvmcl*(t(i)-273.15) lvcp(i) = lv(i)/cpn(i) DO j = 1, nl qent(i, j) = rr(j) elij(i, j) = 0.0 ment(i, j) = 0.0 sij(i, j) = 0.0 uent(i, j) = u(j) vent(i, j) = v(j) DO k = 1, ntra traent(i, j, k) = tra(j, k) END DO END DO END DO delti = 1.0/delt ! *** FIND THE FIRST MODEL LEVEL (INB) ABOVE THE PARCEL'S *** ! *** LEVEL OF NEUTRAL BUOYANCY *** inb = nl - 1 DO i = icb, nl - 1 ! jyg ! CC IF((TVP(I)-TV(I)).LT.DTCRIT)THEN IF (buoy(i)INB AND I12.0) THEN DO i = 1, nl - 1 sig(i) = 0.0 w0(i) = 0.0 END DO END IF ! *** CALCULATE LIQUID WATER STATIC ENERGY OF LIFTED PARCEL *** DO i = icb, inb hp(i) = h(1) + (lv(i)+(cpd-cpv)*t(i))*ep(i)*clw(i) END DO ! *** CALCULATE CONVECTIVE AVAILABLE POTENTIAL ENERGY (CAPE), *** ! *** VERTICAL VELOCITY (W), FRACTIONAL AREA COVERED BY *** ! *** UNDILUTE UPDRAFT (SIG), AND UPDRAFT MASS FLUX (M) *** cape = 0.0 DO i = icb + 1, inb ! jyg1 ! CC CAPE=CAPE+RD*(TVP(I-1)-TV(I-1))*(PH(I-1)-PH(I))/P(I-1) ! CC DCAPE=RD*BUOY(I-1)*(PH(I-1)-PH(I))/P(I-1) ! CC DLNP=(PH(I-1)-PH(I))/P(I-1) ! The interval on which CAPE is computed starts at PBASE : deltap = min(pbase, ph(i-1)) - min(pbase, ph(i)) cape = cape + rd*buoy(i-1)*deltap/p(i-1) dcape = rd*buoy(i-1)*deltap/p(i-1) dlnp = deltap/p(i-1) ! jyg2 ! sb3d print *,'buoy,dlnp,dcape,cape',buoy(i-1),dlnp,dcape,cape ! test sb: ! @ WRITE(*,*) '############################################' ! @ WRITE(*,*) 'cape,rrd,buoy,deltap,p,pbase,ph:' ! @ : ,cape,rd,buoy(i-1),deltap,p(i-1),pbase,ph(i) ! @ WRITE(*,*) '############################################' ! fin test sb cape = amax1(0.0, cape) sigold = sig(i) dtmin = 100.0 DO j = icb, i - 1 ! jyg ! CC DTMIN=AMIN1(DTMIN,(TVP(J)-TV(J))) dtmin = amin1(dtmin, buoy(j)) END DO ! sb3d print *, 'DTMIN, BETA, ALPHA, SIG = ',DTMIN,BETA,ALPHA,SIG(I) sig(i) = beta*sig(i) + alpha*dtmin*abs(dtmin) sig(i) = amax1(sig(i), 0.0) sig(i) = amin1(sig(i), 0.01) fac = amin1(((dtcrit-dtmin)/dtcrit), 1.0) ! jyg ! C Essais de reduction de la vitesse ! C FAC = FAC*.5 w = (1.-beta)*fac*sqrt(cape) + beta*w0(i) amu = 0.5*(sig(i)+sigold)*w m(i) = amu*0.007*p(i)*(ph(i)-ph(i+1))/tv(i) ! --------- test sb: ! WRITE(*,*) '############################################' ! WRITE(*,*) 'k,amu,buoy(k-1),deltap,w,beta,fac,cape,w0(k)' ! WRITE(*,*) i,amu,buoy(i-1),deltap ! : ,w,beta,fac,cape,w0(i) ! WRITE(*,*) '############################################' ! --------- w0(i) = w END DO w0(icb) = 0.5*w0(icb+1) m(icb) = 0.5*m(icb+1)*(ph(icb)-ph(icb+1))/(ph(icb+1)-ph(icb+2)) sig(icb) = sig(icb+1) sig(icb-1) = sig(icb) ! jyg1 ! sb3d print *, 'Cloud base, c. top, CAPE',ICB,INB,cape ! sb3d print *, 'SIG ',(sig(i),i=1,inb) ! sb3d print *, 'W ',(w0(i),i=1,inb) ! sb3d print *, 'M ',(m(i), i=1,inb) ! sb3d print *, 'Dt1 ',(tvp(i)-tv(i),i=1,inb) ! sb3d print *, 'Dt_vrai ',(buoy(i),i=1,inb) ! jyg2 ! *** CALCULATE ENTRAINED AIR MASS FLUX (MENT), TOTAL WATER MIXING *** ! *** RATIO (QENT), TOTAL CONDENSED WATER (ELIJ), AND MIXING *** ! *** FRACTION (SIJ) *** DO i = icb, inb rti = rr(1) - ep(i)*clw(i) DO j = icb - 1, inb bf2 = 1. + lv(j)*lv(j)*rs(j)/(rv*t(j)*t(j)*cpd) anum = h(j) - hp(i) + (cpv-cpd)*t(j)*(rti-rr(j)) denom = h(i) - hp(i) + (cpd-cpv)*(rr(i)-rti)*t(j) dei = denom IF (abs(dei)<0.01) dei = 0.01 sij(i, j) = anum/dei sij(i, i) = 1.0 altem = sij(i, j)*rr(i) + (1.-sij(i,j))*rti - rs(j) altem = altem/bf2 cwat = clw(j)*(1.-ep(j)) stemp = sij(i, j) IF ((stemp<0.0 .OR. stemp>1.0 .OR. altem>cwat) .AND. j>i) THEN anum = anum - lv(j)*(rti-rs(j)-cwat*bf2) denom = denom + lv(j)*(rr(i)-rti) IF (abs(denom)<0.01) denom = 0.01 sij(i, j) = anum/denom altem = sij(i, j)*rr(i) + (1.-sij(i,j))*rti - rs(j) altem = altem - (bf2-1.)*cwat END IF IF (sij(i,j)>0.0 .AND. sij(i,j)<0.95) THEN qent(i, j) = sij(i, j)*rr(i) + (1.-sij(i,j))*rti uent(i, j) = sij(i, j)*u(i) + (1.-sij(i,j))*u(nk) vent(i, j) = sij(i, j)*v(i) + (1.-sij(i,j))*v(nk) DO k = 1, ntra traent(i, j, k) = sij(i, j)*tra(i, k) + (1.-sij(i,j))*tra(nk, k) END DO elij(i, j) = altem elij(i, j) = amax1(0.0, elij(i,j)) ment(i, j) = m(i)/(1.-sij(i,j)) nent(i) = nent(i) + 1 END IF sij(i, j) = amax1(0.0, sij(i,j)) sij(i, j) = amin1(1.0, sij(i,j)) END DO ! *** IF NO AIR CAN ENTRAIN AT LEVEL I ASSUME THAT UPDRAFT DETRAINS ! *** ! *** AT THAT LEVEL AND CALCULATE DETRAINED AIR FLUX AND PROPERTIES ! *** IF (nent(i)==0) THEN ment(i, i) = m(i) qent(i, i) = rr(nk) - ep(i)*clw(i) uent(i, i) = u(nk) vent(i, i) = v(nk) DO j = 1, ntra traent(i, i, j) = tra(nk, j) END DO elij(i, i) = clw(i) sij(i, i) = 1.0 END IF DO j = icb - 1, inb sigij(i, j) = sij(i, j) END DO END DO ! *** NORMALIZE ENTRAINED AIR MASS FLUXES TO REPRESENT EQUAL *** ! *** PROBABILITIES OF MIXING *** DO i = icb, inb IF (nent(i)/=0) THEN qp = rr(1) - ep(i)*clw(i) anum = h(i) - hp(i) - lv(i)*(qp-rs(i)) + (cpv-cpd)*t(i)*(qp-rr(i)) denom = h(i) - hp(i) + lv(i)*(rr(i)-qp) + (cpd-cpv)*t(i)*(rr(i)-qp) IF (abs(denom)<0.01) denom = 0.01 scrit = anum/denom alt = qp - rs(i) + scrit*(rr(i)-qp) IF (scrit<=0.0 .OR. alt<=0.0) scrit = 1.0 smax = 0.0 asij = 0.0 DO j = inb, icb - 1, -1 IF (sij(i,j)>1.0E-16 .AND. sij(i,j)<0.95) THEN wgh = 1.0 IF (j>i) THEN sjmax = amax1(sij(i,j+1), smax) sjmax = amin1(sjmax, scrit) smax = amax1(sij(i,j), smax) sjmin = amax1(sij(i,j-1), smax) sjmin = amin1(sjmin, scrit) IF (sij(i,j)<(smax-1.0E-16)) wgh = 0.0 smid = amin1(sij(i,j), scrit) ELSE sjmax = amax1(sij(i,j+1), scrit) smid = amax1(sij(i,j), scrit) sjmin = 0.0 IF (j>1) sjmin = sij(i, j-1) sjmin = amax1(sjmin, scrit) END IF delp = abs(sjmax-smid) delm = abs(sjmin-smid) asij = asij + wgh*(delp+delm) ment(i, j) = ment(i, j)*(delp+delm)*wgh END IF END DO asij = amax1(1.0E-16, asij) asij = 1.0/asij DO j = icb - 1, inb ment(i, j) = ment(i, j)*asij END DO asum = 0.0 bsum = 0.0 DO j = icb - 1, inb asum = asum + ment(i, j) ment(i, j) = ment(i, j)*sig(j) bsum = bsum + ment(i, j) END DO bsum = amax1(bsum, 1.0E-16) bsum = 1.0/bsum DO j = icb - 1, inb ment(i, j) = ment(i, j)*asum*bsum END DO csum = 0.0 DO j = icb - 1, inb csum = csum + ment(i, j) END DO IF (csum1) THEN DO j = 1, i - 1 awat = elij(j, i) - (1.-ep(i))*clw(i) awat = amax1(awat, 0.0) wdtrain = wdtrain + 10.0*awat*ment(j, i) END DO END IF ! *** FIND RAIN WATER AND EVAPORATION USING PROVISIONAL *** ! *** ESTIMATES OF RP(I)AND RP(I-1) *** wt(i) = 45.0 IF (iPH(I), PR1=1 & PR2=0 ! Pour PH(I+1)0.0) THEN revap = 0.5*(-b6+sqrt(b6*b6+4.*c6)) evap(i) = sigt*afac*revap water(i) = revap*revap ELSE evap(i) = -evap(i+1) + 0.02*(wdtrain+sigd*wt(i)*water(i+1))/(sigd*(ph(i & )-ph(i+1))) END IF ! *** CALCULATE PRECIPITATING DOWNDRAFT MASS FLUX UNDER *** ! *** HYDROSTATIC APPROXIMATION *** IF (i==1) GO TO 360 tevap = amax1(0.0, evap(i)) delth = amax1(0.001, (th(i)-th(i-1))) mp(i) = 10.*lvcp(i)*sigd*tevap*(p(i-1)-p(i))/delth ! *** IF HYDROSTATIC ASSUMPTION FAILS, *** ! *** SOLVE CUBIC DIFFERENCE EQUATION FOR DOWNDRAFT THETA *** ! *** AND MASS FLUX FROM TWO SIMULTANEOUS DIFFERENTIAL EQNS *** amfac = sigd*sigd*70.0*ph(i)*(p(i-1)-p(i))*(th(i)-th(i-1))/(tv(i)*th(i)) amp2 = abs(mp(i+1)*mp(i+1)-mp(i)*mp(i)) IF (amp2>(0.1*amfac)) THEN xf = 100.0*sigd*sigd*sigd*(ph(i)-ph(i+1)) tf = b(i) - 5.0*(th(i)-th(i-1))*t(i)/(lvcp(i)*sigd*th(i)) af = xf*tf + mp(i+1)*mp(i+1)*tinv bf = 2.*(tinv*mp(i+1))**3 + tinv*mp(i+1)*xf*tf + & 50.*(p(i-1)-p(i))*xf*tevap fac2 = 1.0 IF (bf<0.0) fac2 = -1.0 bf = abs(bf) ur = 0.25*bf*bf - af*af*af*tinv*tinv*tinv IF (ur>=0.0) THEN sru = sqrt(ur) fac = 1.0 IF ((0.5*bf-sru)<0.0) fac = -1.0 mp(i) = mp(i+1)*tinv + (0.5*bf+sru)**tinv + & fac*(abs(0.5*bf-sru))**tinv ELSE d = atan(2.*sqrt(-ur)/(bf+1.0E-28)) IF (fac2<0.0) d = 3.14159 - d mp(i) = mp(i+1)*tinv + 2.*sqrt(af*tinv)*cos(d*tinv) END IF mp(i) = amax1(0.0, mp(i)) b(i-1) = b(i) + 100.0*(p(i-1)-p(i))*tevap/(mp(i)+sigd*0.1) - & 10.0*(th(i)-th(i-1))*t(i)/(lvcp(i)*sigd*th(i)) b(i-1) = amax1(b(i-1), 0.0) END IF ! *** LIMIT MAGNITUDE OF MP(I) TO MEET CFL CONDITION *** ampmax = 2.0*(ph(i)-ph(i+1))*delti amp2 = 2.0*(ph(i-1)-ph(i))*delti ampmax = amin1(ampmax, amp2) mp(i) = amin1(mp(i), ampmax) ! *** FORCE MP TO DECREASE LINEARLY TO ZERO *** ! *** BETWEEN CLOUD BASE AND THE SURFACE *** IF (p(i)>p(icb)) THEN mp(i) = mp(icb)*(p(1)-p(i))/(p(1)-p(icb)) END IF 360 CONTINUE ! *** FIND MIXING RATIO OF PRECIPITATING DOWNDRAFT *** IF (i==inb) GO TO 400 rp(i) = rr(i) IF (mp(i)>mp(i+1)) THEN rp(i) = rp(i+1)*mp(i+1) + rr(i)*(mp(i)-mp(i+1)) + & 5.*sigd*(ph(i)-ph(i+1))*(evap(i+1)+evap(i)) rp(i) = rp(i)/mp(i) up(i) = up(i+1)*mp(i+1) + u(i)*(mp(i)-mp(i+1)) up(i) = up(i)/mp(i) vp(i) = vp(i+1)*mp(i+1) + v(i)*(mp(i)-mp(i+1)) vp(i) = vp(i)/mp(i) DO j = 1, ntra trap(i, j) = trap(i+1, j)*mp(i+1) + trap(i, j)*(mp(i)-mp(i+1)) trap(i, j) = trap(i, j)/mp(i) END DO ELSE IF (mp(i+1)>1.0E-16) THEN rp(i) = rp(i+1) + 5.0*sigd*(ph(i)-ph(i+1))*(evap(i+1)+evap(i))/mp(i+1 & ) up(i) = up(i+1) vp(i) = vp(i+1) DO j = 1, ntra trap(i, j) = trap(i+1, j) END DO END IF END IF rp(i) = amin1(rp(i), rs(i)) rp(i) = amax1(rp(i), 0.0) 400 END DO ! *** CALCULATE SURFACE PRECIPITATION IN MM/DAY *** precip = wt(1)*sigd*water(1)*8640.0 ! sb *** Calculate downdraft velocity scale and surface temperature and ! *** ! sb *** water vapor fluctuations ! *** ! sb (inspire de convect 4.3) ! BETAD=10.0 betad = 5.0 wd = betad*abs(mp(icb))*0.01*rd*t(icb)/(sigd*p(icb)) 405 CONTINUE ! *** CALCULATE TENDENCIES OF LOWEST LEVEL POTENTIAL TEMPERATURE *** ! *** AND MIXING RATIO *** dpinv = 1.0/(ph(1)-ph(2)) am = 0.0 DO k = 2, inb am = am + m(k) END DO IF ((0.1*dpinv*am)>=delti) iflag = 4 ft(1) = 0.1*dpinv*am*(t(2)-t(1)+(gz(2)-gz(1))/cpn(1)) ft(1) = ft(1) - 0.5*lvcp(1)*sigd*(evap(1)+evap(2)) ft(1) = ft(1) - 0.09*sigd*mp(2)*t(1)*b(1)*dpinv ft(1) = ft(1) + 0.01*sigd*wt(1)*(cl-cpd)*water(2)*(t(2)-t(1))*dpinv/cpn(1) fr(1) = 0.1*mp(2)*(rp(2)-rr(1))* & ! correction bug conservation eau ! 1 DPINV+SIGD*0.5*(EVAP(1)+EVAP(2)) dpinv + sigd*0.5*(evap(1)+evap(2)) ! IM cf. SBL ! 1 DPINV+SIGD*EVAP(1) fr(1) = fr(1) + 0.1*am*(rr(2)-rr(1))*dpinv fu(1) = fu(1) + 0.1*dpinv*(mp(2)*(up(2)-u(1))+am*(u(2)-u(1))) fv(1) = fv(1) + 0.1*dpinv*(mp(2)*(vp(2)-v(1))+am*(v(2)-v(1))) DO j = 1, ntra ftra(1, j) = ftra(1, j) + 0.1*dpinv*(mp(2)*(trap(2,j)-tra(1, & j))+am*(tra(2,j)-tra(1,j))) END DO amde = 0.0 DO j = 2, inb fr(1) = fr(1) + 0.1*dpinv*ment(j, 1)*(qent(j,1)-rr(1)) fu(1) = fu(1) + 0.1*dpinv*ment(j, 1)*(uent(j,1)-u(1)) fv(1) = fv(1) + 0.1*dpinv*ment(j, 1)*(vent(j,1)-v(1)) DO k = 1, ntra ftra(1, k) = ftra(1, k) + 0.1*dpinv*ment(j, 1)*(traent(j,1,k)-tra(1,k)) END DO END DO ! *** CALCULATE TENDENCIES OF POTENTIAL TEMPERATURE AND MIXING RATIO *** ! *** AT LEVELS ABOVE THE LOWEST LEVEL *** ! *** FIRST FIND THE NET SATURATED UPDRAFT AND DOWNDRAFT MASS FLUXES *** ! *** THROUGH EACH LEVEL *** DO i = 2, inb dpinv = 1.0/(ph(i)-ph(i+1)) cpinv = 1.0/cpn(i) amp1 = 0.0 DO k = i + 1, inb + 1 amp1 = amp1 + m(k) END DO DO k = 1, i DO j = i + 1, inb + 1 amp1 = amp1 + ment(k, j) END DO END DO IF ((0.1*dpinv*amp1)>=delti) iflag = 4 ad = 0.0 DO k = 1, i - 1 DO j = i, inb ad = ad + ment(j, k) END DO END DO ft(i) = 0.1*dpinv*(amp1*(t(i+1)-t(i)+(gz(i+1)-gz(i))*cpinv)-ad*(t(i)-t(i- & 1)+(gz(i)-gz(i-1))*cpinv)) - 0.5*sigd*lvcp(i)*(evap(i)+evap(i+1)) rat = cpn(i-1)*cpinv ft(i) = ft(i) - 0.09*sigd*(mp(i+1)*t(i)*b(i)-mp(i)*t(i-1)*rat*b(i-1))* & dpinv ft(i) = ft(i) + 0.1*dpinv*ment(i, i)*(hp(i)-h(i)+t(i)*(cpv-cpd)*(rr(i)- & qent(i,i)))*cpinv ft(i) = ft(i) + 0.01*sigd*wt(i)*(cl-cpd)*water(i+1)*(t(i+1)-t(i))*dpinv* & cpinv fr(i) = 0.1*dpinv*(amp1*(rr(i+1)-rr(i))-ad*(rr(i)-rr(i-1))) fu(i) = fu(i) + 0.1*dpinv*(amp1*(u(i+1)-u(i))-ad*(u(i)-u(i-1))) fv(i) = fv(i) + 0.1*dpinv*(amp1*(v(i+1)-v(i))-ad*(v(i)-v(i-1))) DO k = 1, ntra ftra(i, k) = ftra(i, k) + 0.1*dpinv*(amp1*(tra(i+1,k)-tra(i, & k))-ad*(tra(i,k)-tra(i-1,k))) END DO DO k = 1, i - 1 awat = elij(k, i) - (1.-ep(i))*clw(i) awat = amax1(awat, 0.0) fr(i) = fr(i) + 0.1*dpinv*ment(k, i)*(qent(k,i)-awat-rr(i)) fu(i) = fu(i) + 0.1*dpinv*ment(k, i)*(uent(k,i)-u(i)) fv(i) = fv(i) + 0.1*dpinv*ment(k, i)*(vent(k,i)-v(i)) ! (saturated updrafts resulting from mixing) ! cld qcond(i) = qcond(i) + (elij(k,i)-awat) ! cld nqcond(i) = nqcond(i) + 1. ! cld DO j = 1, ntra ftra(i, j) = ftra(i, j) + 0.1*dpinv*ment(k, i)*(traent(k,i,j)-tra(i,j & )) END DO END DO DO k = i, inb fr(i) = fr(i) + 0.1*dpinv*ment(k, i)*(qent(k,i)-rr(i)) fu(i) = fu(i) + 0.1*dpinv*ment(k, i)*(uent(k,i)-u(i)) fv(i) = fv(i) + 0.1*dpinv*ment(k, i)*(vent(k,i)-v(i)) DO j = 1, ntra ftra(i, j) = ftra(i, j) + 0.1*dpinv*ment(k, i)*(traent(k,i,j)-tra(i,j & )) END DO END DO fr(i) = fr(i) + 0.5*sigd*(evap(i)+evap(i+1)) + 0.1*(mp(i+1)*(rp(i+ & 1)-rr(i))-mp(i)*(rp(i)-rr(i-1)))*dpinv fu(i) = fu(i) + 0.1*(mp(i+1)*(up(i+1)-u(i))-mp(i)*(up(i)-u(i-1)))*dpinv fv(i) = fv(i) + 0.1*(mp(i+1)*(vp(i+1)-v(i))-mp(i)*(vp(i)-v(i-1)))*dpinv DO j = 1, ntra ftra(i, j) = ftra(i, j) + 0.1*dpinv*(mp(i+1)*(trap(i+1,j)-tra(i, & j))-mp(i)*(trap(i,j)-trap(i-1,j))) END DO ! (saturated downdrafts resulting from mixing) ! cld DO k = i + 1, inb ! cld qcond(i) = qcond(i) + elij(k, i) ! cld nqcond(i) = nqcond(i) + 1. ! cld END DO ! cld ! (particular case: no detraining level is found) ! cld IF (nent(i)==0) THEN ! cld qcond(i) = qcond(i) + (1-ep(i))*clw(i) ! cld nqcond(i) = nqcond(i) + 1. ! cld END IF ! cld IF (nqcond(i)/=0.) THEN ! cld qcond(i) = qcond(i)/nqcond(i) ! cld END IF ! cld END DO ! *** MOVE THE DETRAINMENT AT LEVEL INB DOWN TO LEVEL INB-1 *** ! *** IN SUCH A WAY AS TO PRESERVE THE VERTICALLY *** ! *** INTEGRATED ENTHALPY AND WATER TENDENCIES *** ! test sb: ! @ WRITE(*,*) '--------------------------------------------' ! @ WRITE(*,*) 'inb,ft,hp,h,t,rr,qent,ment,water,waterp,wt,mp,b' ! @ WRITE(*,*) inb,ft(inb),hp(inb),h(inb) ! @ : ,t(inb),rr(inb),qent(inb,inb) ! @ : ,ment(inb,inb),water(inb) ! @ : ,water(inb+1),wt(inb),mp(inb),b(inb) ! @ WRITE(*,*) '--------------------------------------------' ! fin test sb: ax = 0.1*ment(inb, inb)*(hp(inb)-h(inb)+t(inb)*(cpv-cpd)*(rr(inb)-qent(inb, & inb)))/(cpn(inb)*(ph(inb)-ph(inb+1))) ft(inb) = ft(inb) - ax ft(inb-1) = ft(inb-1) + ax*cpn(inb)*(ph(inb)-ph(inb+1))/(cpn(inb-1)*(ph(inb & -1)-ph(inb))) bx = 0.1*ment(inb, inb)*(qent(inb,inb)-rr(inb))/(ph(inb)-ph(inb+1)) fr(inb) = fr(inb) - bx fr(inb-1) = fr(inb-1) + bx*(ph(inb)-ph(inb+1))/(ph(inb-1)-ph(inb)) cx = 0.1*ment(inb, inb)*(uent(inb,inb)-u(inb))/(ph(inb)-ph(inb+1)) fu(inb) = fu(inb) - cx fu(inb-1) = fu(inb-1) + cx*(ph(inb)-ph(inb+1))/(ph(inb-1)-ph(inb)) dx = 0.1*ment(inb, inb)*(vent(inb,inb)-v(inb))/(ph(inb)-ph(inb+1)) fv(inb) = fv(inb) - dx fv(inb-1) = fv(inb-1) + dx*(ph(inb)-ph(inb+1))/(ph(inb-1)-ph(inb)) DO j = 1, ntra ex = 0.1*ment(inb, inb)*(traent(inb,inb,j)-tra(inb,j))/ & (ph(inb)-ph(inb+1)) ftra(inb, j) = ftra(inb, j) - ex ftra(inb-1, j) = ftra(inb-1, j) + ex*(ph(inb)-ph(inb+1))/(ph(inb-1)-ph( & inb)) END DO ! *** HOMOGINIZE TENDENCIES BELOW CLOUD BASE *** asum = 0.0 bsum = 0.0 csum = 0.0 dsum = 0.0 DO i = 1, icb - 1 asum = asum + ft(i)*(ph(i)-ph(i+1)) bsum = bsum + fr(i)*(lv(i)+(cl-cpd)*(t(i)-t(1)))*(ph(i)-ph(i+1)) csum = csum + (lv(i)+(cl-cpd)*(t(i)-t(1)))*(ph(i)-ph(i+1)) dsum = dsum + t(i)*(ph(i)-ph(i+1))/th(i) END DO DO i = 1, icb - 1 ft(i) = asum*t(i)/(th(i)*dsum) fr(i) = bsum/csum END DO ! *** RESET COUNTER AND RETURN *** sig(nd) = 2.0 DO i = 1, nd upwd(i) = 0.0 dnwd(i) = 0.0 ! sb dnwd0(i) = - mp(i) END DO DO i = 1, nl dnwd0(i) = -mp(i) END DO DO i = nl + 1, nd dnwd0(i) = 0. END DO DO i = icb, inb upwd(i) = 0.0 dnwd(i) = 0.0 DO k = i, inb up1 = 0.0 dn1 = 0.0 DO n = 1, i - 1 up1 = up1 + ment(n, k) dn1 = dn1 - ment(k, n) END DO upwd(i) = upwd(i) + m(k) + up1 dnwd(i) = dnwd(i) + dn1 END DO END DO ! ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc ! DETERMINATION DE LA VARIATION DE FLUX ASCENDANT ENTRE ! DEUX NIVEAU NON DILUE Mike ! ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc ! sb do i=1,ND ! sb Mike(i)=M(i) ! sb enddo DO i = 1, nl mike(i) = m(i) END DO DO i = nl + 1, nd mike(i) = 0. END DO DO i = 1, nd ma(i) = 0 END DO ! sb do i=1,nd ! sb do j=i,nd ! sb Ma(i)=Ma(i)+M(j) ! sb enddo ! sb enddo DO i = 1, nl DO j = i, nl ma(i) = ma(i) + m(j) END DO END DO DO i = nl + 1, nd ma(i) = 0. END DO DO i = 1, icb - 1 ma(i) = 0 END DO ! cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc ! ICB REPRESENTE DE NIVEAU OU SE TROUVE LA ! BASE DU NUAGE , ET INB LE TOP DU NUAGE ! ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc DO i = 1, nd mke(i) = upwd(i) + dnwd(i) END DO ! *** Diagnose the in-cloud mixing ratio *** ! cld ! *** of condensed water *** ! cld ! cld DO i = 1, nd ! cld maa(i) = 0.0 ! cld wa(i) = 0.0 ! cld siga(i) = 0.0 ! cld END DO ! cld DO i = nk, inb ! cld DO k = i + 1, inb + 1 ! cld maa(i) = maa(i) + m(k) ! cld END DO ! cld END DO ! cld DO i = icb, inb - 1 ! cld axc(i) = 0. ! cld DO j = icb, i ! cld axc(i) = axc(i) + rd*(tvp(j)-tv(j))*(ph(j)-ph(j+1))/p(j) ! cld END DO ! cld IF (axc(i)>0.0) THEN ! cld wa(i) = sqrt(2.*axc(i)) ! cld END IF ! cld END DO ! cld DO i = 1, nl ! cld IF (wa(i)>0.0) & ! cld siga(i) = maa(i)/wa(i)*rd*tvp(i)/p(i)/100./deltac ! cld siga(i) = min(siga(i), 1.0) ! cld qcondc(i) = siga(i)*clw(i)*(1.-ep(i)) & ! cld +(1.-siga(i))*qcond(i) ! cld END DO ! cld ! @$$cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc ! @$$ CALL writeg1d(1,klev,ma,'ma ','ma ') ! @$$ CALL writeg1d(1,klev,upwd,'upwd ','upwd ') ! @$$ CALL writeg1d(1,klev,dnwd,'dnwd ','dnwd ') ! @$$ CALL writeg1d(1,klev,dnwd0,'dnwd0 ','dnwd0 ') ! @$$ CALL writeg1d(1,klev,tvp,'tvp ','tvp ') ! @$$ CALL writeg1d(1,klev,tra(1:klev,3),'tra3 ','tra3 ') ! @$$ CALL writeg1d(1,klev,tra(1:klev,4),'tra4 ','tra4 ') ! @$$ CALL writeg1d(1,klev,tra(1:klev,5),'tra5 ','tra5 ') ! @$$ CALL writeg1d(1,klev,tra(1:klev,6),'tra6 ','tra6 ') ! @$$ CALL writeg1d(1,klev,tra(1:klev,7),'tra7 ','tra7 ') ! @$$ CALL writeg1d(1,klev,tra(1:klev,8),'tra8 ','tra8 ') ! @$$ CALL writeg1d(1,klev,tra(1:klev,9),'tra9 ','tra9 ') ! @$$ CALL writeg1d(1,klev,tra(1:klev,10),'tra10','tra10') ! @$$ CALL writeg1d(1,klev,tra(1:klev,11),'tra11','tra11') ! @$$ CALL writeg1d(1,klev,tra(1:klev,12),'tra12','tra12') ! @$$ CALL writeg1d(1,klev,tra(1:klev,13),'tra13','tra13') ! @$$ CALL writeg1d(1,klev,tra(1:klev,14),'tra14','tra14') ! @$$ CALL writeg1d(1,klev,tra(1:klev,15),'tra15','tra15') ! @$$ CALL writeg1d(1,klev,tra(1:klev,16),'tra16','tra16') ! @$$ CALL writeg1d(1,klev,tra(1:klev,17),'tra17','tra17') ! @$$ CALL writeg1d(1,klev,tra(1:klev,18),'tra18','tra18') ! @$$ CALL writeg1d(1,klev,tra(1:klev,19),'tra19','tra19') ! @$$ CALL writeg1d(1,klev,tra(1:klev,20),'tra20','tra20 ') ! @$$ CALL writeg1d(1,klev,trap(1:klev,1),'trp1','trp1') ! @$$ CALL writeg1d(1,klev,trap(1:klev,2),'trp2','trp2') ! @$$ CALL writeg1d(1,klev,trap(1:klev,3),'trp3','trp3') ! @$$ CALL writeg1d(1,klev,trap(1:klev,4),'trp4','trp4') ! @$$ CALL writeg1d(1,klev,trap(1:klev,5),'trp5','trp5') ! @$$ CALL writeg1d(1,klev,trap(1:klev,10),'trp10','trp10') ! @$$ CALL writeg1d(1,klev,trap(1:klev,12),'trp12','trp12') ! @$$ CALL writeg1d(1,klev,trap(1:klev,15),'trp15','trp15') ! @$$ CALL writeg1d(1,klev,trap(1:klev,20),'trp20','trp20') ! @$$ CALL writeg1d(1,klev,ftra(1:klev,1),'ftr1 ','ftr1 ') ! @$$ CALL writeg1d(1,klev,ftra(1:klev,2),'ftr2 ','ftr2 ') ! @$$ CALL writeg1d(1,klev,ftra(1:klev,3),'ftr3 ','ftr3 ') ! @$$ CALL writeg1d(1,klev,ftra(1:klev,4),'ftr4 ','ftr4 ') ! @$$ CALL writeg1d(1,klev,ftra(1:klev,5),'ftr5 ','ftr5 ') ! @$$ CALL writeg1d(1,klev,ftra(1:klev,6),'ftr6 ','ftr6 ') ! @$$ CALL writeg1d(1,klev,ftra(1:klev,7),'ftr7 ','ftr7 ') ! @$$ CALL writeg1d(1,klev,ftra(1:klev,8),'ftr8 ','ftr8 ') ! @$$ CALL writeg1d(1,klev,ftra(1:klev,9),'ftr9 ','ftr9 ') ! @$$ CALL writeg1d(1,klev,ftra(1:klev,10),'ftr10','ftr10') ! @$$ CALL writeg1d(1,klev,ftra(1:klev,11),'ftr11','ftr11') ! @$$ CALL writeg1d(1,klev,ftra(1:klev,12),'ftr12','ftr12') ! @$$ CALL writeg1d(1,klev,ftra(1:klev,13),'ftr13','ftr13') ! @$$ CALL writeg1d(1,klev,ftra(1:klev,14),'ftr14','ftr14') ! @$$ CALL writeg1d(1,klev,ftra(1:klev,15),'ftr15','ftr15') ! @$$ CALL writeg1d(1,klev,ftra(1:klev,16),'ftr16','ftr16') ! @$$ CALL writeg1d(1,klev,ftra(1:klev,17),'ftr17','ftr17') ! @$$ CALL writeg1d(1,klev,ftra(1:klev,18),'ftr18','ftr18') ! @$$ CALL writeg1d(1,klev,ftra(1:klev,19),'ftr19','ftr19') ! @$$ CALL writeg1d(1,klev,ftra(1:klev,20),'ftr20','ftr20 ') ! @$$ CALL writeg1d(1,klev,mp,'mp ','mp ') ! @$$ CALL writeg1d(1,klev,Mke,'Mke ','Mke ') ! cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc END SUBROUTINE convect3 ! ---------------------------------------------------------------------------