! Simulateur COSP : Cfmip Observation Simulator Package ! ISCCP, Radar (QuickBeam), Lidar et Parasol (ACTSIM), MISR, RTTOVS !Idelkadi Abderrahmane Aout-Septembre 2009 First Version !Idelkadi Abderrahmane Nov 2015 version v1.4.0 subroutine phys_cosp2( itap,dtime,freq_cosp, & ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, & ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, & Nptslmdz,Nlevlmdz,lon,lat, presnivs,overlaplmdz,sunlit, & ref_liq,ref_ice,fracTerLic,u_wind,v_wind,phis,phi,ph,p,skt,t, & sh,rh,tca,cca,mr_lsliq,mr_lsice,fl_lsrainI,fl_lssnowI, & fl_ccrainI,fl_ccsnowI,mr_ozone,dtau_s,dem_s) !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!! Inputs : ! itap, !Increment de la physiq ! dtime, !Pas de temps physiq ! overlap, !Overlap type in SCOPS ! Npoints, !Nb de points de la grille physiq ! Nlevels, !Nb de niveaux verticaux ! Ncolumns, !Number of subcolumns ! lon,lat, !Longitudes et latitudes de la grille LMDZ ! ref_liq,ref_ice, !Rayons effectifs des particules liq et ice (en microm) ! fracTerLic, !Fraction terre a convertir en masque ! u_wind,v_wind, !Vents a 10m ??? ! phi, !Geopotentiel ! phis, !Geopotentiel sol ! ph, !pression pour chaque inter-couche ! p, !Pression aux milieux des couches ! skt,t, !Temp au sol et temp 3D ! sh, !Humidite specifique ! rh, !Humidite relatif ! tca, !Fraction nuageuse ! cca !Fraction nuageuse convective ! mr_lsliq, !Liq Cloud water content ! mr_lsice, !Ice Cloud water content ! mr_ccliq, !Convective Cloud Liquid water content ! mr_ccice, !Cloud ice water content ! fl_lsrain, !Large scale precipitation lic ! fl_lssnow, !Large scale precipitation ice ! fl_ccrain, !Convective precipitation lic ! fl_ccsnow, !Convective precipitation ice ! mr_ozone, !Concentration ozone (Kg/Kg) ! dem_s !Cloud optical emissivity ! dtau_s !Cloud optical thickness ! emsfc_lw = 1. !Surface emissivity dans radlwsw.F90 !!! Outputs : ! calipso2D, !Lidar Low/heigh/Mean/Total-level Cloud Fraction ! calipso3D, !Lidar Cloud Fraction (532 nm) ! cfadlidar, !Lidar Scattering Ratio CFAD (532 nm) ! parasolrefl, !PARASOL-like mono-directional reflectance ! atb, !Lidar Attenuated Total Backscatter (532 nm) ! betamol, !Lidar Molecular Backscatter (532 nm) ! cfaddbze, !Radar Reflectivity Factor CFAD (94 GHz) ! clcalipso2, !Cloud frequency of occurrence as seen by CALIPSO but not CloudSat ! dbze, !Efective_reflectivity_factor ! cltlidarradar, !Lidar and Radar Total Cloud Fraction ! clMISR, !Cloud Fraction as Calculated by the MISR Simulator ! clisccp2, !Cloud Fraction as Calculated by the ISCCP Simulator ! boxtauisccp, !Optical Depth in Each Column as Calculated by the ISCCP Simulator ! boxptopisccp, !Cloud Top Pressure in Each Column as Calculated by the ISCCP Simulator ! tclisccp, !Total Cloud Fraction as Calculated by the ISCCP Simulator ! ctpisccp, !Mean Cloud Top Pressure as Calculated by the ISCCP Simulator ! tauisccp, !Mean Optical Depth as Calculated by the ISCCP Simulator ! albisccp, !Mean Cloud Albedo as Calculated by the ISCCP Simulator ! meantbisccp, !Mean all-sky 10.5 micron brightness temperature as calculated by the ISCCP Simulator ! meantbclrisccp !Mean clear-sky 10.5 micron brightness temperature as calculated by the ISCCP Simulator !!! AI rajouter les nouvelles sorties !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! AI rajouter !INCLUDE "cosp_defs.h" ! USE MOD_COSP_CONSTANTS ! USE MOD_COSP_TYPES ! USE MOD_COSP USE mod_phys_lmdz_para USE mod_grid_phy_lmdz use ioipsl use iophy use cosp_output_mod use cosp_output_write_mod USE lmdz_xios, ONLY : using_xios ! use MOD_COSP_Modis_Simulator, only : cosp_modis ! use mod_cosp_config, only : vgrid_zl,vgrid_zu,vgrid_z USE MOD_COSP_INTERFACE_v1p4, ONLY: cosp => cosp_interface_v1p4, & cosp_gridbox,construct_cosp_vgrid, & construct_cosp_gridbox, & free_cosp_gridbox => destroy_cosp_gridbox, & free_cosp_sgradar => destroy_cosp_sgradar, & free_cosp_radarstats => destroy_cosp_radarstats, & free_cosp_sglidar => destroy_cosp_sglidar, & free_cosp_lidarstats => destroy_cosp_lidarstats, & free_cosp_isccp => destroy_cosp_isccp, & free_cosp_misr => destroy_cosp_misr, & free_cosp_rttov => destroy_cosp_rttov, & free_cosp_modis => destroy_cosp_modis, & free_cosp_vgrid => destroy_cosp_vgrid, & free_cosp_subgrid => destroy_cosp_subgrid, & construct_cosp_subgrid,cosp_config,cosp_subgrid, & cosp_sglidar,cosp_lidarstats, & construct_cosp_lidarstats,construct_cosp_sglidar, & cosp_isccp,construct_cosp_isccp,cosp_misr, & construct_cosp_misr,cosp_rttov,construct_cosp_rttov,& cosp_sgradar,cosp_radarstats, & construct_cosp_radarstats,construct_cosp_sgradar, & cosp_modis,construct_cosp_modis, & cosp_vgrid,I_CVCLIQ,I_LSCLIQ,I_CVCICE,I_LSCICE, & I_LSRAIN,I_LSSNOW,I_LSGRPL,I_CVRAIN,I_CVSNOW use cosp_read_otputkeys IMPLICIT NONE ! Local variables character(len=64),PARAMETER :: cosp_input_nl='cosp_input_nl.txt' character(len=64),PARAMETER :: cosp_output_nl='cosp_output_nl.txt' integer, save :: isccp_topheight,isccp_topheight_direction,overlap integer,save :: Ncolumns ! Number of subcolumns in SCOPS integer, save :: Npoints ! Number of gridpoints !$OMP THREADPRIVATE(Npoints) integer, save :: Nlevels ! Number of levels Integer :: Nptslmdz,Nlevlmdz ! Nb de points issus de physiq.F integer, save :: Nlr ! Number of levels in statistical outputs integer, save :: Npoints_it ! Max number of gridpoints to be processed in one iteration ! integer :: i type(cosp_config),save :: cfg ! Configuration options !$OMP THREADPRIVATE(cfg) type(cosp_gridbox) :: gbx ! Gridbox information. Input for COSP type(cosp_subgrid) :: sgx ! Subgrid outputs type(cosp_sgradar) :: sgradar ! Output from radar simulator type(cosp_sglidar) :: sglidar ! Output from lidar simulator type(cosp_isccp) :: isccp ! Output from ISCCP simulator !! AI rajout modis type(cosp_modis) :: modis ! Output from MODIS simulator !! type(cosp_misr) :: misr ! Output from MISR simulator !! AI rajout rttovs type(cosp_rttov) :: rttov ! Output from RTTOV !! type(cosp_vgrid) :: vgrid ! Information on vertical grid of stats type(cosp_radarstats) :: stradar ! Summary statistics from radar simulator type(cosp_lidarstats) :: stlidar ! Summary statistics from lidar simulator integer :: t0,t1,count_rate,count_max integer :: Nlon,Nlat real(wp),save :: radar_freq,k2,ZenAng,co2,ch4,n2o,co,emsfc_lw !$OMP THREADPRIVATE(emsfc_lw) integer,dimension(RTTOV_MAX_CHANNELS),save :: Channels real(wp),dimension(RTTOV_MAX_CHANNELS),save :: Surfem integer, save :: surface_radar,use_mie_tables,use_gas_abs,do_ray,melt_lay integer, save :: Nprmts_max_hydro,Naero,Nprmts_max_aero,lidar_ice_type integer, save :: platform,satellite,Instrument,Nchannels logical, save :: use_vgrid,csat_vgrid,use_precipitation_fluxes,use_reff ! Declaration necessaires pour les sorties IOIPSL integer :: ii real :: ecrit_day,ecrit_hf,ecrit_mth, missing_val logical :: ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, ok_all_xml logical, save :: debut_cosp=.true. !$OMP THREADPRIVATE(debut_cosp) logical, save :: first_write=.true. !$OMP THREADPRIVATE(first_write) !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Input variables from LMDZ-GCM integer :: overlaplmdz ! overlap type: 1=max, 2=rand, 3=max/rand ! cosp input (output lmdz) real,dimension(Nptslmdz,Nlevlmdz) :: height,phi,p,ph,T,sh,rh,tca,cca,mr_lsliq,mr_lsice,mr_ccliq,mr_ccice, & fl_lsrain,fl_lssnow,fl_ccrain,fl_ccsnow,fl_lsgrpl, & zlev,zlev_half,mr_ozone,radliq,radice,dtau_s,dem_s,ref_liq,ref_ice real,dimension(Nptslmdz,Nlevlmdz) :: fl_lsrainI,fl_lssnowI,fl_ccrainI,fl_ccsnowI real,dimension(Nptslmdz) :: lon,lat,skt,fracTerLic,u_wind,v_wind,phis,sunlit real,dimension(Nlevlmdz) :: presnivs integer :: itap,k,ip real :: dtime,freq_cosp real,dimension(2) :: time_bnds double precision :: d_dtime double precision,dimension(2) :: d_time_bnds namelist/COSP_INPUT/overlap,isccp_topheight,isccp_topheight_direction, & npoints_it,ncolumns,use_vgrid,Nlr,csat_vgrid, & radar_freq,surface_radar,use_mie_tables, & use_gas_abs,do_ray,melt_lay,k2,Nprmts_max_hydro,Naero,Nprmts_max_aero, & lidar_ice_type,use_precipitation_fluxes,use_reff, & platform,satellite,Instrument,Nchannels, & Channels,Surfem,ZenAng,co2,ch4,n2o,co !---------------- End of declaration of variables -------------- !+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ! Read namelist with COSP inputs !+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ print*,'Entree phys_cosp2' if (debut_cosp) then NPoints=Nptslmdz Nlevels=Nlevlmdz ! Lecture du namelist input ! CALL read_cosp_input IF (is_master) THEN OPEN(10,file=cosp_input_nl,status='old') READ(10,nml=cosp_input) CLOSE(10) ENDIF !$OMP BARRIER CALL bcast(overlap) CALL bcast(isccp_topheight) CALL bcast(isccp_topheight_direction) CALL bcast(npoints_it) CALL bcast(ncolumns) CALL bcast(use_vgrid) CALL bcast(Nlr) CALL bcast(csat_vgrid) CALL bcast(radar_freq) CALL bcast(surface_radar) CALL bcast(use_mie_tables) CALL bcast(use_gas_abs) CALL bcast(do_ray) CALL bcast(melt_lay) CALL bcast(k2) CALL bcast(Nprmts_max_hydro) CALL bcast(Naero) CALL bcast(Nprmts_max_aero) CALL bcast(lidar_ice_type) CALL bcast(use_precipitation_fluxes) CALL bcast(use_reff) CALL bcast(platform) CALL bcast(satellite) CALL bcast(Instrument) CALL bcast(Nchannels) CALL bcast(Channels) CALL bcast(Surfem) CALL bcast(ZenAng) CALL bcast(co2) CALL bcast(ch4) CALL bcast(n2o) CALL bcast(co) print*,'ok read cosp_input_nl' ! Clefs Outputs initialisation IF (using_xios) THEN call cosp_outputkeys_init(cfg) ELSE call read_cosp_output_nl(itap,cosp_output_nl,cfg) ENDIF print*,' Cles des differents simulateurs cosp a itap :',itap print*,'Lradar_sim,Llidar_sim,Lisccp_sim,Lmisr_sim,Lmodis_sim,Lrttov_sim,Lstats', & cfg%Lradar_sim,cfg%Llidar_sim,cfg%Lisccp_sim,cfg%Lmisr_sim,cfg%Lmodis_sim, & cfg%Lrttov_sim,cfg%Lstats if (overlaplmdz/=overlap) then print*,'Attention overlaplmdz different de overlap lu dans namelist ' endif print*,'Fin lecture Namelists, debut_cosp =',debut_cosp endif ! debut_cosp !!! Ici on modifie les cles logiques pour les outputs selon les champs actives dans les .xml if ((itap>1).and.(first_write))then IF (using_xios) call read_xiosfieldactive(cfg) first_write=.false. print*,' Cles des differents simulateurs cosp a itap :',itap print*,'Lradar_sim,Llidar_sim,Lisccp_sim,Lmisr_sim,Lmodis_sim,Lrttov_sim,Lstats', & cfg%Lradar_sim,cfg%Llidar_sim,cfg%Lisccp_sim,cfg%Lmisr_sim,cfg%Lmodis_sim, & cfg%Lrttov_sim,cfg%Lstats endif time_bnds(1) = dtime-dtime/2. time_bnds(2) = dtime+dtime/2. d_time_bnds=time_bnds d_dtime=dtime !+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ! Allocate memory for gridbox type !+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ! AI mars 2017 ! print *, 'Allocating memory for gridbox type...' ! Surafce emissivity emsfc_lw = 1. call construct_cosp_gridbox(d_dtime,d_time_bnds,radar_freq,surface_radar,use_mie_tables,use_gas_abs, & do_ray,melt_lay,k2, & Npoints,Nlevels,Ncolumns,N_HYDRO,Nprmts_max_hydro,Naero,Nprmts_max_aero,Npoints_it, & lidar_ice_type,isccp_topheight,isccp_topheight_direction,overlap,emsfc_lw, & use_precipitation_fluxes,use_reff, & Platform,Satellite,Instrument,Nchannels,ZenAng, & channels(1:Nchannels),surfem(1:Nchannels),co2,ch4,n2o,co,gbx) !+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ! Here code to populate input structure !+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ! print *, 'Populating input structure...' gbx%longitude = lon gbx%latitude = lat gbx%p = p ! gbx%ph = ph gbx%zlev = phi/9.81 zlev_half(:,1) = phis(:)/9.81 do k = 2, Nlevels do ip = 1, Npoints zlev_half(ip,k) = phi(ip,k)/9.81 + & (phi(ip,k)-phi(ip,k-1))/9.81 * (ph(ip,k)-p(ip,k)) / (p(ip,k)-p(ip,k-1)) enddo enddo gbx%zlev_half = zlev_half gbx%T = T gbx%q = rh*100. gbx%sh = sh ! On ne veut pas que cosp distingue les nuages stratiformes et convectifs ! on passe les contenus totaux (conv+strat) gbx%cca = 0. !convective_cloud_amount (1) gbx%tca = tca ! total_cloud_amount (1) gbx%psfc = ph(:,1) !pression de surface gbx%skt = skt !Skin temperature (K) do ip = 1, Npoints if (fracTerLic(ip)>=0.5) then gbx%land(ip) = 1. else gbx%land(ip) = 0. endif enddo gbx%mr_ozone = mr_ozone !mass_fraction_of_ozone_in_air (kg/kg) ! A voir l equivalent LMDZ (u10m et v10m) gbx%u_wind = u_wind !eastward_wind (m s-1) gbx%v_wind = v_wind !northward_wind ! sunlit calcule a partir de la fraction d ensoleillement par jour ! do ip = 1, Npoints ! if (sunlit(ip).le.0.) then ! gbx%sunlit(ip)=0. ! else ! gbx%sunlit(ip)=1. ! endif ! enddo gbx%sunlit=sunlit ! A voir l equivalent LMDZ mr_ccliq = 0.0 mr_ccice = 0.0 gbx%mr_hydro(:,:,I_LSCLIQ) = mr_lsliq !mixing_ratio_large_scale_cloud_liquid (kg/kg) gbx%mr_hydro(:,:,I_LSCICE) = mr_lsice !mixing_ratio_large_scale_cloud_ic gbx%mr_hydro(:,:,I_CVCLIQ) = mr_ccliq !mixing_ratio_convective_cloud_liquid gbx%mr_hydro(:,:,I_CVCICE) = mr_ccice !mixing_ratio_convective_cloud_ice ! A revoir fl_lsrain = fl_lsrainI + fl_ccrainI fl_lssnow = fl_lssnowI + fl_ccsnowI gbx%rain_ls = fl_lsrain !flux_large_scale_cloud_rain (kg m^-2 s^-1) gbx%snow_ls = fl_lssnow !flux_large_scale_cloud_snow ! A voir l equivalent LMDZ fl_lsgrpl=0. fl_ccsnow = 0. fl_ccrain = 0. gbx%grpl_ls = fl_lsgrpl !flux_large_scale_cloud_graupel gbx%rain_cv = fl_ccrain !flux_convective_cloud_rain gbx%snow_cv = fl_ccsnow !flux_convective_cloud_snow gbx%Reff(:,:,I_LSCLIQ) = ref_liq*1e-6 gbx%Reff(:,:,I_LSCICE) = ref_ice*1e-6 !! AI A revoir gbx%Reff(:,:,I_CVCLIQ) = ref_liq*1e-6 gbx%Reff(:,:,I_CVCICE) = ref_ice*1e-6 ! ISCCP simulator gbx%dtau_s = dtau_s gbx%dtau_c = 0. gbx%dem_s = dem_s gbx%dem_c = 0. !+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ! Define new vertical grid !+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ! print *, 'Defining new vertical grid...' call construct_cosp_vgrid(gbx,Nlr,use_vgrid,csat_vgrid,vgrid) print*,'Nlvgrid,use_vgrid,csat_vgrid ',Nlr,use_vgrid,csat_vgrid print*,'vgrid%z, vgrid%mz ',vgrid%z, vgrid%mz !+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ! Allocate memory for other types !+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ! print *, 'Allocating memory for other types...' call construct_cosp_subgrid(Npoints, Ncolumns, Nlevels, sgx) if (cfg%Lradar_sim) call construct_cosp_sgradar(Npoints,Ncolumns,Nlevels,N_HYDRO,sgradar) if (cfg%Lradar_sim) call construct_cosp_radarstats(Npoints,Ncolumns,vgrid%Nlvgrid,N_HYDRO,stradar) if (cfg%Llidar_sim) call construct_cosp_sglidar(Npoints,Ncolumns,Nlevels,N_HYDRO,PARASOL_NREFL,sglidar) if (cfg%Llidar_sim) call construct_cosp_lidarstats(Npoints,Ncolumns,vgrid%Nlvgrid,N_HYDRO,PARASOL_NREFL,stlidar) if (cfg%Lisccp_sim) call construct_cosp_isccp(Npoints,Ncolumns,Nlevels,isccp) !! AI rajout if (cfg%Lmodis_sim) call construct_cosp_modis(Npoints,modis) !! if (cfg%Lmisr_sim) call construct_cosp_misr(Npoints,misr) ! call construct_cosp_rttov(cfg,Npoints,Nchannels,rttov) if (debut_cosp) then !$OMP MASTER print *, ' Open outpts files and define axis' call cosp_output_open(Nlevlmdz, Ncolumns, presnivs, dtime, freq_cosp, & ok_mensuelCOSP, ok_journeCOSP, ok_hfCOSP, ok_all_xml, & ecrit_mth, ecrit_day, ecrit_hf, use_vgrid, vgrid) !$OMP END MASTER !$OMP BARRIER debut_cosp=.false. endif ! debut_cosp !!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ! Call simulator !+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ print*,'call simulateur' call cosp(overlap,Ncolumns,cfg,vgrid,gbx,sgx,sgradar,sglidar, & isccp,misr,modis,rttov,stradar,stlidar) !!!!!!!!!!!!!!!!!! Ecreture des sorties Cosp !!!!!!!!!!!!!!r!!!!!!:!!!!! print *, 'Calling write output' call cosp_output_write(Nlevlmdz, Npoints, Ncolumns, itap, dtime, freq_COSP, missing_val, & cfg, gbx, vgrid, sglidar, sgradar, stlidar, stradar, & isccp, misr, modis) !+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ! Deallocate memory in derived types !+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ print *, 'Deallocating memory...' call free_cosp_gridbox(gbx) print *, 'free_cosp_gridbox' call free_cosp_subgrid(sgx) print *, 'ffree_cosp_subgrid' call free_cosp_vgrid(vgrid) print *, 'free_cosp_vgrid' if (cfg%Lradar_sim) call free_cosp_sgradar(sgradar) if (cfg%Lradar_sim) call free_cosp_radarstats(stradar) if (cfg%Llidar_sim) call free_cosp_sglidar(sglidar) if (cfg%Llidar_sim) call free_cosp_lidarstats(stlidar) if (cfg%Lisccp_sim) call free_cosp_isccp(isccp) if (cfg%Lmisr_sim) call free_cosp_misr(misr) if (cfg%Lmodis_sim) call free_cosp_modis(modis) if (cfg%Lrttov_sim) call free_cosp_rttov(rttov) print *, 'End phys_cosp2' !+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ! Time in s. Only for testing purposes ! call system_clock(t1,count_rate,count_max) ! print *,(t1-t0)*1.0/count_rate end subroutine phys_cosp2