! ! $Id: dynredem_p.F 1635 2012-07-12 11:37:16Z acozic $ ! c SUBROUTINE dynredem0_p(fichnom,iday_end,phis) #ifdef CPP_IOIPSL USE IOIPSL #endif USE parallel USE infotrac use netcdf95, only: NF95_PUT_VAR IMPLICIT NONE c======================================================================= c Ecriture du fichier de redemarrage sous format NetCDF (initialisation) c======================================================================= c Declarations: c ------------- #include "dimensions.h" #include "paramet.h" #include "comconst.h" #include "comvert.h" #include "comgeom2.h" #include "temps.h" #include "ener.h" #include "logic.h" #include "netcdf.inc" #include "description.h" #include "serre.h" c Arguments: c ---------- INTEGER iday_end REAL phis(iip1, jjp1) CHARACTER*(*) fichnom c Local: c ------ INTEGER iq,l INTEGER length PARAMETER (length = 100) REAL tab_cntrl(length) ! tableau des parametres du run INTEGER ierr character*20 modname character*80 abort_message c Variables locales pour NetCDF: c INTEGER dims2(2), dims3(3), dims4(4) INTEGER idim_index INTEGER idim_rlonu, idim_rlonv, idim_rlatu, idim_rlatv INTEGER idim_s, idim_sig INTEGER idim_tim INTEGER nid,nvarid REAL zan0,zjulian,hours INTEGER yyears0,jjour0, mmois0 character*30 unites c----------------------------------------------------------------------- if (mpi_rank==0) then modname='dynredem0_p' #ifdef CPP_IOIPSL call ymds2ju(annee_ref, 1, iday_end, 0.0, zjulian) call ju2ymds(zjulian, yyears0, mmois0, jjour0, hours) #else ! set yyears0, mmois0, jjour0 to 0,1,1 (hours is not used) yyears0=0 mmois0=1 jjour0=1 #endif DO l=1,length tab_cntrl(l) = 0. ENDDO tab_cntrl(1) = REAL(iim) tab_cntrl(2) = REAL(jjm) tab_cntrl(3) = REAL(llm) tab_cntrl(4) = REAL(day_ref) tab_cntrl(5) = REAL(annee_ref) tab_cntrl(6) = rad tab_cntrl(7) = omeg tab_cntrl(8) = g tab_cntrl(9) = cpp tab_cntrl(10) = kappa tab_cntrl(11) = daysec tab_cntrl(12) = dtvr tab_cntrl(13) = etot0 tab_cntrl(14) = ptot0 tab_cntrl(15) = ztot0 tab_cntrl(16) = stot0 tab_cntrl(17) = ang0 tab_cntrl(18) = pa tab_cntrl(19) = preff c c ..... parametres pour le zoom ...... tab_cntrl(20) = clon tab_cntrl(21) = clat tab_cntrl(22) = grossismx tab_cntrl(23) = grossismy c IF ( fxyhypb ) THEN tab_cntrl(24) = 1. tab_cntrl(25) = dzoomx tab_cntrl(26) = dzoomy tab_cntrl(27) = 0. tab_cntrl(28) = taux tab_cntrl(29) = tauy ELSE tab_cntrl(24) = 0. tab_cntrl(25) = dzoomx tab_cntrl(26) = dzoomy tab_cntrl(27) = 0. tab_cntrl(28) = 0. tab_cntrl(29) = 0. IF( ysinus ) tab_cntrl(27) = 1. ENDIF tab_cntrl(30) = REAL(iday_end) tab_cntrl(31) = REAL(itau_dyn + itaufin) c start_time: start_time of simulation (not necessarily 0.) tab_cntrl(32) = start_time c c ......................................................... c c Creation du fichier: c ierr = NF_CREATE(fichnom, NF_CLOBBER, nid) IF (ierr.NE.NF_NOERR) THEN WRITE(6,*)" Pb d ouverture du fichier "//fichnom WRITE(6,*)' ierr = ', ierr CALL ABORT ENDIF c c Preciser quelques attributs globaux: c ierr = NF_PUT_ATT_TEXT (nid, NF_GLOBAL, "title", 27, . "Fichier demmarage dynamique") c c Definir les dimensions du fichiers: c ierr = NF_DEF_DIM (nid, "index", length, idim_index) ierr = NF_DEF_DIM (nid, "rlonu", iip1, idim_rlonu) ierr = NF_DEF_DIM (nid, "rlatu", jjp1, idim_rlatu) ierr = NF_DEF_DIM (nid, "rlonv", iip1, idim_rlonv) ierr = NF_DEF_DIM (nid, "rlatv", jjm, idim_rlatv) ierr = NF_DEF_DIM (nid, "sigs", llm, idim_s) ierr = NF_DEF_DIM (nid, "sig", llmp1, idim_sig) ierr = NF_DEF_DIM (nid, "temps", NF_UNLIMITED, idim_tim) c ierr = NF_ENDDEF(nid) ! sortir du mode de definition c c Definir et enregistrer certains champs invariants: c ierr = NF_REDEF (nid) cIM 220306 BEG #ifdef NC_DOUBLE ierr = NF_DEF_VAR (nid,"controle",NF_DOUBLE,1,idim_index,nvarid) #else ierr = NF_DEF_VAR (nid,"controle",NF_FLOAT,1,idim_index,nvarid) #endif cIM 220306 END ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 22, . "Parametres de controle") ierr = NF_ENDDEF(nid) call NF95_PUT_VAR(nid,nvarid,tab_cntrl) c ierr = NF_REDEF (nid) cIM 220306 BEG #ifdef NC_DOUBLE ierr = NF_DEF_VAR (nid,"rlonu",NF_DOUBLE,1,idim_rlonu,nvarid) #else ierr = NF_DEF_VAR (nid,"rlonu",NF_FLOAT,1,idim_rlonu,nvarid) #endif cIM 220306 END ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 23, . "Longitudes des points U") ierr = NF_ENDDEF(nid) call NF95_PUT_VAR(nid,nvarid,rlonu) c ierr = NF_REDEF (nid) cIM 220306 BEG #ifdef NC_DOUBLE ierr = NF_DEF_VAR (nid,"rlatu",NF_DOUBLE,1,idim_rlatu,nvarid) #else ierr = NF_DEF_VAR (nid,"rlatu",NF_FLOAT,1,idim_rlatu,nvarid) #endif cIM 220306 END ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 22, . "Latitudes des points U") ierr = NF_ENDDEF(nid) call NF95_PUT_VAR (nid,nvarid,rlatu) c ierr = NF_REDEF (nid) cIM 220306 BEG #ifdef NC_DOUBLE ierr = NF_DEF_VAR (nid,"rlonv",NF_DOUBLE,1,idim_rlonv,nvarid) #else ierr = NF_DEF_VAR (nid,"rlonv",NF_FLOAT,1,idim_rlonv,nvarid) #endif cIM 220306 END ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 23, . "Longitudes des points V") ierr = NF_ENDDEF(nid) call NF95_PUT_VAR(nid,nvarid,rlonv) c ierr = NF_REDEF (nid) cIM 220306 BEG #ifdef NC_DOUBLE ierr = NF_DEF_VAR (nid,"rlatv",NF_DOUBLE,1,idim_rlatv,nvarid) #else ierr = NF_DEF_VAR (nid,"rlatv",NF_FLOAT,1,idim_rlatv,nvarid) #endif cIM 220306 END ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 22, . "Latitudes des points V") ierr = NF_ENDDEF(nid) call NF95_PUT_VAR(nid,nvarid,rlatv) c ierr = NF_REDEF (nid) cIM 220306 BEG #ifdef NC_DOUBLE ierr = NF_DEF_VAR (nid,"nivsigs",NF_DOUBLE,1,idim_s,nvarid) #else ierr = NF_DEF_VAR (nid,"nivsigs",NF_FLOAT,1,idim_s,nvarid) #endif cIM 220306 END ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 28, . "Numero naturel des couches s") ierr = NF_ENDDEF(nid) call NF95_PUT_VAR(nid,nvarid,nivsigs) c ierr = NF_REDEF (nid) cIM 220306 BEG #ifdef NC_DOUBLE ierr = NF_DEF_VAR (nid,"nivsig",NF_DOUBLE,1,idim_sig,nvarid) #else ierr = NF_DEF_VAR (nid,"nivsig",NF_FLOAT,1,idim_sig,nvarid) #endif cIM 220306 END ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 32, . "Numero naturel des couches sigma") ierr = NF_ENDDEF(nid) call NF95_PUT_VAR(nid,nvarid,nivsig) c ierr = NF_REDEF (nid) cIM 220306 BEG #ifdef NC_DOUBLE ierr = NF_DEF_VAR (nid,"ap",NF_DOUBLE,1,idim_sig,nvarid) #else ierr = NF_DEF_VAR (nid,"ap",NF_FLOAT,1,idim_sig,nvarid) #endif cIM 220306 END ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 26, . "Coefficient A pour hybride") ierr = NF_ENDDEF(nid) call NF95_PUT_VAR(nid,nvarid,ap) c ierr = NF_REDEF (nid) cIM 220306 BEG #ifdef NC_DOUBLE ierr = NF_DEF_VAR (nid,"bp",NF_DOUBLE,1,idim_sig,nvarid) #else ierr = NF_DEF_VAR (nid,"bp",NF_FLOAT,1,idim_sig,nvarid) #endif cIM 220306 END ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 26, . "Coefficient B pour hybride") ierr = NF_ENDDEF(nid) call NF95_PUT_VAR(nid,nvarid,bp) c ierr = NF_REDEF (nid) cIM 220306 BEG #ifdef NC_DOUBLE ierr = NF_DEF_VAR (nid,"presnivs",NF_DOUBLE,1,idim_s,nvarid) #else ierr = NF_DEF_VAR (nid,"presnivs",NF_FLOAT,1,idim_s,nvarid) #endif cIM 220306 END ierr = NF_ENDDEF(nid) call NF95_PUT_VAR(nid,nvarid,presnivs) c c Coefficients de passage cov. <-> contra. <--> naturel c ierr = NF_REDEF (nid) dims2(1) = idim_rlonu dims2(2) = idim_rlatu cIM 220306 BEG #ifdef NC_DOUBLE ierr = NF_DEF_VAR (nid,"cu",NF_DOUBLE,2,dims2,nvarid) #else ierr = NF_DEF_VAR (nid,"cu",NF_FLOAT,2,dims2,nvarid) #endif cIM 220306 END ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 29, . "Coefficient de passage pour U") ierr = NF_ENDDEF(nid) call NF95_PUT_VAR(nid,nvarid,cu) c ierr = NF_REDEF (nid) dims2(1) = idim_rlonv dims2(2) = idim_rlatv cIM 220306 BEG #ifdef NC_DOUBLE ierr = NF_DEF_VAR (nid,"cv",NF_DOUBLE,2,dims2,nvarid) #else ierr = NF_DEF_VAR (nid,"cv",NF_FLOAT,2,dims2,nvarid) #endif cIM 220306 END ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 29, . "Coefficient de passage pour V") ierr = NF_ENDDEF(nid) call NF95_PUT_VAR(nid,nvarid,cv) c c Aire de chaque maille: c ierr = NF_REDEF (nid) dims2(1) = idim_rlonv dims2(2) = idim_rlatu cIM 220306 BEG #ifdef NC_DOUBLE ierr = NF_DEF_VAR (nid,"aire",NF_DOUBLE,2,dims2,nvarid) #else ierr = NF_DEF_VAR (nid,"aire",NF_FLOAT,2,dims2,nvarid) #endif cIM 220306 END ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 22, . "Aires de chaque maille") ierr = NF_ENDDEF(nid) call NF95_PUT_VAR(nid,nvarid,aire) c c Geopentiel au sol: c ierr = NF_REDEF (nid) dims2(1) = idim_rlonv dims2(2) = idim_rlatu cIM 220306 BEG #ifdef NC_DOUBLE ierr = NF_DEF_VAR (nid,"phisinit",NF_DOUBLE,2,dims2,nvarid) #else ierr = NF_DEF_VAR (nid,"phisinit",NF_FLOAT,2,dims2,nvarid) #endif cIM 220306 END ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 19, . "Geopotentiel au sol") ierr = NF_ENDDEF(nid) call NF95_PUT_VAR(nid,nvarid,phis) c c Definir les variables pour pouvoir les enregistrer plus tard: c ierr = NF_REDEF (nid) ! entrer dans le mode de definition c cIM 220306 BEG #ifdef NC_DOUBLE ierr = NF_DEF_VAR (nid,"temps",NF_DOUBLE,1,idim_tim,nvarid) #else ierr = NF_DEF_VAR (nid,"temps",NF_FLOAT,1,idim_tim,nvarid) #endif cIM 220306 END ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 19, . "Temps de simulation") write(unites,200)yyears0,mmois0,jjour0 200 format('days since ',i4,'-',i2.2,'-',i2.2,' 00:00:00') ierr = NF_PUT_ATT_TEXT (nid, nvarid, "units", 30, . unites) c dims4(1) = idim_rlonu dims4(2) = idim_rlatu dims4(3) = idim_s dims4(4) = idim_tim cIM 220306 BEG #ifdef NC_DOUBLE ierr = NF_DEF_VAR (nid,"ucov",NF_DOUBLE,4,dims4,nvarid) #else ierr = NF_DEF_VAR (nid,"ucov",NF_FLOAT,4,dims4,nvarid) #endif cIM 220306 END ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 9, . "Vitesse U") c dims4(1) = idim_rlonv dims4(2) = idim_rlatv dims4(3) = idim_s dims4(4) = idim_tim cIM 220306 BEG #ifdef NC_DOUBLE ierr = NF_DEF_VAR (nid,"vcov",NF_DOUBLE,4,dims4,nvarid) #else ierr = NF_DEF_VAR (nid,"vcov",NF_FLOAT,4,dims4,nvarid) #endif cIM 220306 END ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 9, . "Vitesse V") c dims4(1) = idim_rlonv dims4(2) = idim_rlatu dims4(3) = idim_s dims4(4) = idim_tim cIM 220306 BEG #ifdef NC_DOUBLE ierr = NF_DEF_VAR (nid,"teta",NF_DOUBLE,4,dims4,nvarid) #else ierr = NF_DEF_VAR (nid,"teta",NF_FLOAT,4,dims4,nvarid) #endif cIM 220306 END ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 11, . "Temperature") c dims4(1) = idim_rlonv dims4(2) = idim_rlatu dims4(3) = idim_s dims4(4) = idim_tim DO iq=1,nqtot cIM 220306 BEG #ifdef NC_DOUBLE ierr = NF_DEF_VAR (nid,tname(iq),NF_DOUBLE,4,dims4,nvarid) #else ierr = NF_DEF_VAR (nid,tname(iq),NF_FLOAT,4,dims4,nvarid) #endif cIM 220306 END ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 12,ttext(iq)) ENDDO c dims4(1) = idim_rlonv dims4(2) = idim_rlatu dims4(3) = idim_s dims4(4) = idim_tim cIM 220306 BEG #ifdef NC_DOUBLE ierr = NF_DEF_VAR (nid,"masse",NF_DOUBLE,4,dims4,nvarid) #else ierr = NF_DEF_VAR (nid,"masse",NF_FLOAT,4,dims4,nvarid) #endif cIM 220306 END ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 12, . "C est quoi ?") c dims3(1) = idim_rlonv dims3(2) = idim_rlatu dims3(3) = idim_tim cIM 220306 BEG #ifdef NC_DOUBLE ierr = NF_DEF_VAR (nid,"ps",NF_DOUBLE,3,dims3,nvarid) #else ierr = NF_DEF_VAR (nid,"ps",NF_FLOAT,3,dims3,nvarid) #endif cIM 220306 END ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 15, . "Pression au sol") c ierr = NF_ENDDEF(nid) ! sortir du mode de definition ierr = NF_CLOSE(nid) ! fermer le fichier PRINT*,'iim,jjm,llm,iday_end',iim,jjm,llm,iday_end PRINT*,'rad,omeg,g,cpp,kappa', , rad,omeg,g,cpp,kappa endif ! mpi_rank==0 RETURN END SUBROUTINE dynredem1_p(fichnom,time, . vcov,ucov,teta,q,masse,ps) USE parallel USE infotrac USE control_mod use netcdf, only: NF90_get_VAR use netcdf95, only: NF95_PUT_VAR IMPLICIT NONE c================================================================= c Ecriture du fichier de redemarrage sous format NetCDF c================================================================= #include "dimensions.h" #include "paramet.h" #include "description.h" #include "netcdf.inc" #include "comvert.h" #include "comgeom.h" #include "temps.h" INTEGER l REAL vcov(iip1,jjm,llm),ucov(iip1, jjp1,llm) REAL teta(iip1, jjp1,llm) REAL ps(iip1, jjp1),masse(iip1, jjp1,llm) REAL q(iip1, jjp1, llm, nqtot) CHARACTER*(*) fichnom REAL time INTEGER nid, nvarid, nid_trac, nvarid_trac REAL trac_tmp(ip1jmp1,llm) INTEGER ierr, ierr_file INTEGER iq INTEGER length PARAMETER (length = 100) REAL tab_cntrl(length) ! tableau des parametres du run character*20 modname character*80 abort_message c INTEGER nb SAVE nb DATA nb / 0 / logical exist_file call Gather_Field(ucov,ip1jmp1,llm,0) call Gather_Field(vcov,ip1jm,llm,0) call Gather_Field(teta,ip1jmp1,llm,0) call Gather_Field(masse,ip1jmp1,llm,0) call Gather_Field(ps,ip1jmp1,1,0) do iq=1,nqtot call Gather_Field(q(:,:,:,iq),ip1jmp1,llm,0) enddo if (mpi_rank==0) then modname = 'dynredem1' ierr = NF_OPEN(fichnom, NF_WRITE, nid) IF (ierr .NE. NF_NOERR) THEN PRINT*, "Pb. d ouverture "//fichnom CALL abort ENDIF c Ecriture/extension de la coordonnee temps nb = nb + 1 ierr = NF_INQ_VARID(nid, "temps", nvarid) IF (ierr .NE. NF_NOERR) THEN print *, NF_STRERROR(ierr) abort_message='Variable temps n est pas definie' CALL abort_gcm(modname,abort_message,ierr) ENDIF call NF95_PUT_VAR(nid,nvarid,time,start=(/nb/)) PRINT*, "Enregistrement pour ", nb, time c c Re-ecriture du tableau de controle, itaufin n'est plus defini quand c on passe dans dynredem0 ierr = NF_INQ_VARID (nid, "controle", nvarid) IF (ierr .NE. NF_NOERR) THEN abort_message="dynredem1: Le champ est absent" ierr = 1 CALL abort_gcm(modname,abort_message,ierr) ENDIF ierr = NF90_GET_VAR(nid, nvarid, tab_cntrl) tab_cntrl(31) = REAL(itau_dyn + itaufin) call NF95_PUT_VAR(nid,nvarid,tab_cntrl) c Ecriture des champs c ierr = NF_INQ_VARID(nid, "ucov", nvarid) IF (ierr .NE. NF_NOERR) THEN PRINT*, "Variable ucov n est pas definie" CALL abort ENDIF call NF95_PUT_VAR(nid,nvarid,ucov) ierr = NF_INQ_VARID(nid, "vcov", nvarid) IF (ierr .NE. NF_NOERR) THEN PRINT*, "Variable vcov n est pas definie" CALL abort ENDIF call NF95_PUT_VAR(nid,nvarid,vcov) ierr = NF_INQ_VARID(nid, "teta", nvarid) IF (ierr .NE. NF_NOERR) THEN PRINT*, "Variable teta n est pas definie" CALL abort ENDIF call NF95_PUT_VAR(nid,nvarid,teta) IF (type_trac == 'inca') THEN ! Ajout Anne pour lecture valeurs traceurs dans un fichier start_trac.nc inquire(FILE="start_trac.nc", EXIST=exist_file) print *, "EXIST", exist_file if (exist_file) then ierr_file = NF_OPEN ("start_trac.nc", NF_NOWRITE,nid_trac) IF (ierr_file .NE.NF_NOERR) THEN write(6,*)' Pb d''ouverture du fichier start_trac.nc' write(6,*)' ierr = ', ierr_file ENDIF else ierr_file = 2 endif END IF do iq=1,nqtot IF (type_trac /= 'inca') THEN ierr = NF_INQ_VARID(nid, tname(iq), nvarid) IF (ierr .NE. NF_NOERR) THEN PRINT*, "Variable tname(iq) n est pas definie" CALL abort ENDIF call NF95_PUT_VAR(nid,nvarid,q(:,:,:,iq)) ELSE ! type_trac = inca ! lecture de la valeur du traceur dans start_trac.nc IF (ierr_file .ne. 2) THEN ierr = NF_INQ_VARID (nid_trac, tname(iq), nvarid_trac) IF (ierr .NE. NF_NOERR) THEN PRINT*, tname(iq),"est absent de start_trac.nc" ierr = NF_INQ_VARID(nid, tname(iq), nvarid) IF (ierr .NE. NF_NOERR) THEN PRINT*, "Variable ", tname(iq)," n est pas definie" CALL abort ENDIF call NF95_PUT_VAR(nid,nvarid,q(:,:,:,iq)) ELSE PRINT*, tname(iq), "est present dans start_trac.nc" ierr = NF90_GET_VAR(nid_trac, nvarid_trac, trac_tmp) IF (ierr .NE. NF_NOERR) THEN PRINT*, "Lecture echouee pour", tname(iq) CALL abort ENDIF ierr = NF_INQ_VARID(nid, tname(iq), nvarid) IF (ierr .NE. NF_NOERR) THEN PRINT*, "Variable ", tname(iq)," n est pas definie" CALL abort ENDIF call NF95_PUT_VAR(nid, nvarid, trac_tmp) ENDIF ! IF (ierr .NE. NF_NOERR) ! fin lecture du traceur ELSE ! si il n'y a pas de fichier start_trac.nc ! print *, 'il n y a pas de fichier start_trac' ierr = NF_INQ_VARID(nid, tname(iq), nvarid) IF (ierr .NE. NF_NOERR) THEN PRINT*, "Variable tname(iq) n est pas definie" CALL abort ENDIF call NF95_PUT_VAR(nid,nvarid,q(:,:,:,iq)) ENDIF ! (ierr_file .ne. 2) END IF !type_trac ENDDO c ierr = NF_INQ_VARID(nid, "masse", nvarid) IF (ierr .NE. NF_NOERR) THEN PRINT*, "Variable masse n est pas definie" CALL abort ENDIF call NF95_PUT_VAR(nid,nvarid,masse) c ierr = NF_INQ_VARID(nid, "ps", nvarid) IF (ierr .NE. NF_NOERR) THEN PRINT*, "Variable ps n est pas definie" CALL abort ENDIF call NF95_PUT_VAR(nid,nvarid,ps) ierr = NF_CLOSE(nid) c endif ! mpi_rank==0 RETURN END