SUBROUTINE dynredem0_loc(fichnom,iday_end,phis) ! !------------------------------------------------------------------------------- ! Write the NetCDF restart file (initialization). !------------------------------------------------------------------------------- #ifdef CPP_IOIPSL USE IOIPSL #endif USE parallel_lmdz USE mod_hallo USE infotrac USE netcdf, ONLY: NF90_CREATE, NF90_DEF_DIM, NF90_INQ_VARID, NF90_GLOBAL, & NF90_CLOSE, NF90_PUT_ATT, NF90_UNLIMITED, NF90_CLOBBER, & NF90_64BIT_OFFSET USE dynredem_mod, ONLY: cre_var, put_var, err, modname, fil USE strings_mod, ONLY: maxlen USE comvert_mod, ONLY: ap,bp,aps,bps,presnivs,pseudoalt,pa,preff, & nivsig,nivsigs USE comconst_mod, ONLY: cpp, daysec, dtvr, g, kappa, omeg, rad USE logic_mod, ONLY: fxyhypb, ysinus USE serre_mod, ONLY: clon,clat,grossismx,grossismy,dzoomx,dzoomy, & taux,tauy USE temps_mod, ONLY: annee_ref, day_ref, itau_dyn, itaufin, start_time USE ener_mod, ONLY: etot0,ptot0,ztot0,stot0,ang0 IMPLICIT NONE include "dimensions.h" include "paramet.h" include "comgeom.h" include "description.h" include "iniprint.h" !=============================================================================== ! Arguments: CHARACTER(LEN=*), INTENT(IN) :: fichnom !--- FILE NAME INTEGER, INTENT(IN) :: iday_end !--- REAL, INTENT(IN) :: phis(ijb_u:ije_u)!--- GROUND GEOPOTENTIAL !=============================================================================== ! Local variables: INTEGER :: iq, l INTEGER, PARAMETER :: length=100 REAL :: tab_cntrl(length) !--- RUN PARAMETERS TABLE REAL :: phis_glo(ip1jmp1) ! For NetCDF: CHARACTER(LEN=maxlen) :: unites INTEGER :: indexID INTEGER :: rlonuID, rlonvID, rlatuID, rlatvID INTEGER :: sID, sigID, nID, vID, timID INTEGER :: yyears0, jjour0, mmois0 REAL :: zan0, zjulian, hours !=============================================================================== modname='dynredem0'; fil=fichnom CALL Gather_field_u(phis,phis_glo,1) IF(mpi_rank/=0) RETURN #ifdef CPP_IOIPSL CALL ymds2ju(annee_ref, 1, iday_end, 0.0, zjulian) CALL ju2ymds(zjulian, yyears0, mmois0, jjour0, hours) #else ! set yyears0, mmois0, jjour0 to 0,1,1 (hours is not used) yyears0=0 mmois0=1 jjour0=1 #endif tab_cntrl(:) = 0. tab_cntrl(1) = REAL(iim) tab_cntrl(2) = REAL(jjm) tab_cntrl(3) = REAL(llm) tab_cntrl(4) = REAL(day_ref) tab_cntrl(5) = REAL(annee_ref) tab_cntrl(6) = rad tab_cntrl(7) = omeg tab_cntrl(8) = g tab_cntrl(9) = cpp tab_cntrl(10) = kappa tab_cntrl(11) = daysec tab_cntrl(12) = dtvr tab_cntrl(13) = etot0 tab_cntrl(14) = ptot0 tab_cntrl(15) = ztot0 tab_cntrl(16) = stot0 tab_cntrl(17) = ang0 tab_cntrl(18) = pa tab_cntrl(19) = preff ! ..... parameters for zoom ...... tab_cntrl(20) = clon tab_cntrl(21) = clat tab_cntrl(22) = grossismx tab_cntrl(23) = grossismy ! IF ( fxyhypb ) THEN tab_cntrl(24) = 1. tab_cntrl(25) = dzoomx tab_cntrl(26) = dzoomy tab_cntrl(27) = 0. tab_cntrl(28) = taux tab_cntrl(29) = tauy ELSE tab_cntrl(24) = 0. tab_cntrl(25) = dzoomx tab_cntrl(26) = dzoomy tab_cntrl(27) = 0. tab_cntrl(28) = 0. tab_cntrl(29) = 0. IF( ysinus ) tab_cntrl(27) = 1. END IF tab_cntrl(30) = REAL(iday_end) tab_cntrl(31) = REAL(itau_dyn + itaufin) ! start_time: start_time of simulation (not necessarily 0.) tab_cntrl(32) = start_time !--- File creation CALL err(NF90_CREATE(fichnom,IOR(NF90_CLOBBER,NF90_64BIT_OFFSET),nid)) !--- Some global attributes CALL err(NF90_PUT_ATT(nid,NF90_GLOBAL,"title","Fichier demarrage dynamique")) !--- Dimensions CALL err(NF90_DEF_DIM(nid,"index", length, indexID)) CALL err(NF90_DEF_DIM(nid,"rlonu", iip1, rlonuID)) CALL err(NF90_DEF_DIM(nid,"rlatu", jjp1, rlatuID)) CALL err(NF90_DEF_DIM(nid,"rlonv", iip1, rlonvID)) CALL err(NF90_DEF_DIM(nid,"rlatv", jjm, rlatvID)) CALL err(NF90_DEF_DIM(nid,"sigs", llm, sID)) CALL err(NF90_DEF_DIM(nid,"sig", llmp1, sigID)) CALL err(NF90_DEF_DIM(nid,"temps", NF90_UNLIMITED, timID)) !--- Define and save invariant fields CALL put_var(nid,"controle","Parametres de controle" ,[indexID],tab_cntrl) CALL put_var(nid,"rlonu" ,"Longitudes des points U",[rlonuID],rlonu) CALL put_var(nid,"rlatu" ,"Latitudes des points U" ,[rlatuID],rlatu) CALL put_var(nid,"rlonv" ,"Longitudes des points V",[rlonvID],rlonv) CALL put_var(nid,"rlatv" ,"Latitudes des points V" ,[rlatvID],rlatv) CALL put_var(nid,"nivsigs" ,"Numero naturel des couches s" ,[sID] ,nivsigs) CALL put_var(nid,"nivsig" ,"Numero naturel des couches sigma",[sigID],nivsig) CALL put_var(nid,"ap" ,"Coefficient A pour hybride" ,[sigID],ap) CALL put_var(nid,"bp" ,"Coefficient B pour hybride" ,[sigID],bp) CALL put_var(nid,"presnivs","" ,[sID] ,presnivs) ! covariant <-> contravariant <-> natural conversion coefficients CALL put_var(nid,"cu","Coefficient de passage pour U",[rlonuID,rlatuID],cu) CALL put_var(nid,"cv","Coefficient de passage pour V",[rlonvID,rlatvID],cv) CALL put_var(nid,"aire","Aires de chaque maille" ,[rlonvID,rlatuID],aire) CALL put_var(nid,"phisinit","Geopotentiel au sol" ,[rlonvID,rlatuID],phis_glo) !--- Define fields saved later WRITE(unites,"('days since ',i4,'-',i2.2,'-',i2.2,' 00:00:00')"),& yyears0,mmois0,jjour0 CALL cre_var(nid,"temps","Temps de simulation",[timID],unites) CALL cre_var(nid,"ucov" ,"Vitesse U" ,[rlonuID,rlatuID,sID,timID]) CALL cre_var(nid,"vcov" ,"Vitesse V" ,[rlonvID,rlatvID,sID,timID]) CALL cre_var(nid,"teta" ,"Temperature",[rlonvID,rlatuID,sID,timID]) DO iq=1,nqtot CALL cre_var(nid,tracers(iq)%name,tracers(iq)%longName,[rlonvID,rlatuID,sID,timID]) END DO CALL cre_var(nid,"masse","Masse d air" ,[rlonvID,rlatuID,sID,timID]) CALL cre_var(nid,"ps" ,"Pression au sol",[rlonvID,rlatuID ,timID]) CALL err(NF90_CLOSE (nid)) WRITE(lunout,*)TRIM(modname)//': iim,jjm,llm,iday_end',iim,jjm,llm,iday_end WRITE(lunout,*)TRIM(modname)//': rad,omeg,g,cpp,kappa',rad,omeg,g,cpp,kappa END SUBROUTINE dynredem0_loc ! !------------------------------------------------------------------------------- !------------------------------------------------------------------------------- ! SUBROUTINE dynredem1_loc(fichnom,time,vcov,ucov,teta,q,masse,ps) ! !------------------------------------------------------------------------------- ! Purpose: Write the NetCDF restart file (append). !------------------------------------------------------------------------------- USE parallel_lmdz USE mod_hallo USE infotrac USE control_mod USE netcdf, ONLY: NF90_OPEN, NF90_NOWRITE, NF90_GET_VAR, NF90_INQ_VARID, & NF90_CLOSE, NF90_WRITE, NF90_PUT_VAR, NF90_NoErr USE dynredem_mod, ONLY: dynredem_write_u, dynredem_write_v, dynredem_read_u, & err, modname, fil, msg USE temps_mod, ONLY: itau_dyn, itaufin IMPLICIT NONE include "dimensions.h" include "paramet.h" include "description.h" include "comgeom.h" include "iniprint.h" !=============================================================================== ! Arguments: CHARACTER(LEN=*), INTENT(IN) :: fichnom !-- FILE NAME REAL, INTENT(IN) :: time !-- TIME REAL, INTENT(IN) :: vcov(ijb_v:ije_v,llm) !-- V COVARIANT WIND REAL, INTENT(IN) :: ucov(ijb_u:ije_u,llm) !-- U COVARIANT WIND REAL, INTENT(IN) :: teta(ijb_u:ije_u,llm) !-- POTENTIAL TEMPERATURE REAL, INTENT(INOUT) :: q(ijb_u:ije_u,llm,nqtot) !-- TRACERS REAL, INTENT(IN) :: masse(ijb_u:ije_u,llm) !-- MASS PER CELL REAL, INTENT(IN) :: ps(ijb_u:ije_u) !-- GROUND PRESSURE !=============================================================================== ! Local variables: INTEGER :: l, iq, nid, vID, ierr, nid_trac, vID_trac INTEGER, SAVE :: nb=0 INTEGER, PARAMETER :: length=100 REAL :: tab_cntrl(length) ! tableau des parametres du run CHARACTER(LEN=maxlen) :: var, dum LOGICAL :: lread_inca !=============================================================================== !$OMP MASTER IF(mpi_rank==0) THEN !++++++++++++++++++++++++++++++++++++++++++++++++++++++++ modname='dynredem1_loc'; fil=fichnom fil=fichnom CALL err(NF90_OPEN(fil,NF90_WRITE,nid),"open",fil) !--- Write/extend time coordinate nb = nb + 1 var="temps" CALL err(NF90_INQ_VARID(nid,var,vID),"inq",var) CALL err(NF90_PUT_VAR(nid,vID,[time]),"put",var) WRITE(lunout,*)TRIM(modname)//": Saving for ", nb, time !--- Rewrite control table (itaufin undefined in dynredem0) var="controle" CALL err(NF90_INQ_VARID(nid,var,vID),"inq",var) CALL err(NF90_GET_VAR(nid,vID,tab_cntrl),"get",var) tab_cntrl(31)=DBLE(itau_dyn + itaufin) CALL err(NF90_INQ_VARID(nid,var,vID),"inq",var) CALL err(NF90_PUT_VAR(nid,vID,tab_cntrl),"put",var) END IF !++++++++++++++++++++++++++++++++++++++++++++++++++++++++ !$OMP END MASTER !--- Save fields CALL dynredem_write_u(nid,"ucov" ,ucov ,llm) CALL dynredem_write_v(nid,"vcov" ,vcov ,llm) CALL dynredem_write_u(nid,"teta" ,teta ,llm) CALL dynredem_write_u(nid,"masse",masse,llm) CALL dynredem_write_u(nid,"ps" ,ps ,1) !--- Tracers in file "start_trac.nc" (added by Anne) lread_inca=.FALSE. !$OMP MASTER fil="start_trac.nc" IF(type_trac=='inca' .OR. type_trac=='inco') INQUIRE(FILE=fil,EXIST=lread_inca) IF(lread_inca) CALL err(NF90_OPEN(fil,NF90_NOWRITE,nid_trac),"open") !$OMP END MASTER !$OMP BARRIER !--- Save tracers DO iq=1,nqtot; var=TRIM(tracers(iq)%name); ierr=-1 IF(lread_inca) THEN !--- Possibly read from "start_trac.nc" !$OMP MASTER fil="start_trac.nc" ierr=NF90_INQ_VARID(nid_trac,var,vID_trac) dum='inq'; IF(ierr==NF90_NoErr) dum='fnd' WRITE(lunout,*)msg(dum,var) !$OMP END MASTER !$OMP BARRIER IF(ierr==NF90_NoErr) CALL dynredem_read_u(nid_trac,var,q(:,:,iq),llm) END IF fil=fichnom CALL dynredem_write_u(nid,var,q(:,:,iq),llm) END DO !$OMP MASTER IF(mpi_rank==0) THEN !++++++++++++++++++++++++++++++++++++++++++++++++++++++++ CALL err(NF90_CLOSE(nid),"close") fil="start_trac.nc" IF(lread_inca) CALL err(NF90_CLOSE(nid_trac),"close") END IF !++++++++++++++++++++++++++++++++++++++++++++++++++++++++ !$OMP END MASTER END SUBROUTINE dynredem1_loc