! ! $Id: physiq_mod.F90 3908 2021-05-20 07:11:13Z idelkadi $ ! !#define IO_DEBUG MODULE physiq_mod IMPLICIT NONE CONTAINS SUBROUTINE physiq (nlon,nlev, & debut,lafin,pdtphys_, & paprs,pplay,pphi,pphis,presnivs, & u,v,rot,t,qx, & flxmass_w, & d_u, d_v, d_t, d_qx, d_ps) ! For clarity, the "USE" section is now arranged in alphabetical order, ! with a separate section for CPP keys ! PLEASE try to follow this rule USE ACAMA_GWD_rando_m, only: ACAMA_GWD_rando USE aero_mod USE add_phys_tend_mod, only : add_pbl_tend, add_phys_tend, diag_phys_tend, prt_enerbil, & & fl_ebil, fl_cor_ebil USE assert_m, only: assert USE change_srf_frac_mod USE conf_phys_m, only: conf_phys USE carbon_cycle_mod, ONLY : infocfields_init, RCO2_glo, carbon_cycle_rad USE CFMIP_point_locations ! IM stations CFMIP USE cmp_seri_mod USE dimphy USE etat0_limit_unstruct_mod USE FLOTT_GWD_rando_m, only: FLOTT_GWD_rando USE fonte_neige_mod, ONLY : fonte_neige_get_vars USE geometry_mod, ONLY: cell_area, latitude_deg, longitude_deg USE ioipsl, only: histbeg, histvert, histdef, histend, histsync, & histwrite, ju2ymds, ymds2ju, getin USE ioipsl_getin_p_mod, ONLY : getin_p USE indice_sol_mod USE infotrac_phy, ONLY: nqtot, nbtr, nqo, type_trac,ok_isotopes, & nqtottr,itr_indice ! C Risi USE iophy USE limit_read_mod, ONLY : init_limit_read USE mod_grid_phy_lmdz, ONLY: nbp_lon, nbp_lat, nbp_lev, klon_glo, grid1dTo2d_glo, grid_type, unstructured USE mod_phys_lmdz_mpi_data, only: is_mpi_root USE mod_phys_lmdz_para USE netcdf95, only: nf95_close USE netcdf, only: nf90_fill_real ! IM for NMC files USE open_climoz_m, only: open_climoz ! ozone climatology from a file USE ozonecm_m, only: ozonecm ! ozone of J.-F. Royer USE pbl_surface_mod, ONLY : pbl_surface USE phyaqua_mod, only: zenang_an USE phystokenc_mod, ONLY: offline, phystokenc USE phys_cal_mod, only: year_len, mth_len, days_elapsed, jh_1jan, & year_cur, mth_cur,jD_cur, jH_cur, jD_ref, day_cur, hour !! USE phys_local_var_mod, ONLY : a long list of variables !! ==> see below, after "CPP Keys" section USE phys_state_var_mod ! Variables sauvegardees de la physique USE phys_output_mod USE phys_output_ctrlout_mod USE print_control_mod, ONLY: mydebug=>debug , lunout, prt_level USE readaerosol_mod, ONLY : init_aero_fromfile USE readaerosolstrato_m, ONLY : init_readaerosolstrato USE radlwsw_m, only: radlwsw USE regr_horiz_time_climoz_m, ONLY: regr_horiz_time_climoz USE regr_pr_time_av_m, only: regr_pr_time_av USE surface_data, ONLY : type_ocean, ok_veget, landice_opt USE time_phylmdz_mod, only: annee_ref, current_time, day_ini, day_ref, & day_step_phy, itau_phy, pdtphys, raz_date, start_time, update_time USE tracinca_mod, ONLY: config_inca USE tropopause_m, ONLY: dyn_tropopause USE vampir USE VERTICAL_LAYERS_MOD, ONLY: aps,bps, ap, bp USE write_field_phy USE lscp_mod, ONLY : lscp !USE cmp_seri_mod ! USE add_phys_tend_mod, only : add_pbl_tend, add_phys_tend, diag_phys_tend, prt_enerbil, & ! & fl_ebil, fl_cor_ebil !!!!!!!!!!!!!!!!!! "USE" section for CPP keys !!!!!!!!!!!!!!!!!!!!!!!! ! ! #ifdef CPP_Dust USE phytracr_spl_mod, ONLY: phytracr_spl, phytracr_spl_out_init USE phys_output_write_spl_mod #else USE phytrac_mod, ONLY : phytrac_init, phytrac USE phys_output_write_mod #endif #ifdef REPROBUS USE CHEM_REP, ONLY : Init_chem_rep_xjour, & d_q_rep,d_ql_rep,d_qi_rep,ptrop,ttrop, & ztrop, gravit,itroprep, Z1,Z2,fac,B #endif #ifdef CPP_RRTM USE YOERAD, ONLY : NRADLP USE YOESW, ONLY : RSUN #endif #ifdef CPP_StratAer USE strataer_mod, ONLY: strataer_init #endif #ifdef CPP_XIOS USE xios, ONLY: xios_update_calendar, xios_context_finalize, & xios_get_field_attr, xios_field_is_active USE wxios, ONLY: missing_val, missing_val_omp #endif #ifndef CPP_XIOS USE paramLMDZ_phy_mod #endif #ifdef ISO USE infotrac_phy, ONLY: & iqiso,iso_num,iso_indnum,zone_num,ok_isotrac, & niso,ntraciso,nqtottr,itr_indice ! ajout C Risi pour isos USE isotopes_mod, ONLY: iso_eau,iso_HDO,iso_O18,iso_O17,iso_HTO, & & bidouille_anti_divergence,ok_bidouille_wake, & & modif_ratqs,essai_convergence,iso_init,ridicule_rain,tnat, & & ridicule,ridicule_snow USE isotopes_routines_mod, ONLY: iso_tritium #ifdef ISOVERIF USE isotopes_verif_mod, ONLY: errmax,errmaxrel, & & deltalim,deltalim_snow, deltaD,deltaO,nlevmaxO17, & & iso_verif_positif_nostop,iso_verif_egalite_vect2D, & & iso_verif_aberrant_enc_vect2D,iso_verif_noNaN_vect2D, & & iso_verif_noNaN,iso_verif_aberrant_vect2D, & & iso_verif_o18_aberrant,iso_verif_aberrant_o17, & & iso_verif_aberrant,iso_verif_egalite_choix, & & iso_verif_aberrant_encadre,iso_verif_egalite, & & iso_verif_aberrant_choix,iso_verif_positif, & & iso_verif_positif_choix_vect,iso_verif_o18_aberrant_nostop, & & iso_verif_init, & & iso_verif_positif_strict_nostop,iso_verif_O18_aberrant_enc_vect2D #endif #ifdef ISOTRAC USE isotrac_mod, ONLY: option_traceurs,iso_traceurs_init, & & option_tmin,nzone_temp USE isotrac_routines_mod, only: initialise_bassins_boites, & & isotrac_recolorise_general,isotrac_recolorise_conv, & & iso_verif_traceur_jbid_vect,iso_verif_traceur_jbid_pos_vect #ifdef ISOVERIF USE isotrac_routines_mod, only: iso_verif_traceur_pbidouille USE isotopes_verif_mod, ONLY: iso_verif_traceur, & & iso_verif_traceur_justmass,iso_verif_traceur_vect, & & iso_verif_trac17_q_deltad,iso_verif_trac_masse_vect, & & iso_verif_tracpos_choix_nostop #endif #endif #endif ! ! !!!!!!!!!!!!!!!!!! END "USE" for CPP keys !!!!!!!!!!!!!!!!!!!!!! USE phys_local_var_mod, ONLY: phys_local_var_init, phys_local_var_end, & ! [Variables internes non sauvegardees de la physique] ! Variables locales pour effectuer les appels en serie t_seri,q_seri,ql_seri,qs_seri,u_seri,v_seri,tr_seri, & ! Dynamic tendencies (diagnostics) d_t_dyn,d_q_dyn,d_ql_dyn,d_qs_dyn,d_u_dyn,d_v_dyn,d_tr_dyn, & d_q_dyn2d,d_ql_dyn2d,d_qs_dyn2d, & ! Physic tendencies d_t_con,d_q_con,d_u_con,d_v_con, & d_tr, & !! to be removed?? (jyg) d_t_wake,d_q_wake, & d_t_lwr,d_t_lw0,d_t_swr,d_t_sw0, & d_t_ajsb,d_q_ajsb, & d_t_ajs,d_q_ajs,d_u_ajs,d_v_ajs, & d_t_ajs_w,d_q_ajs_w, & d_t_ajs_x,d_q_ajs_x, & ! d_t_eva,d_q_eva,d_ql_eva,d_qi_eva, & d_t_lsc,d_q_lsc,d_ql_lsc,d_qi_lsc, & d_t_lscst,d_q_lscst, & d_t_lscth,d_q_lscth, & plul_st,plul_th, & ! d_t_vdf,d_q_vdf,d_u_vdf,d_v_vdf,d_t_diss, & d_t_vdf_w,d_q_vdf_w, & d_t_vdf_x,d_q_vdf_x, & d_ts, & ! d_t_oli,d_u_oli,d_v_oli, & d_t_oro,d_u_oro,d_v_oro, & d_t_oro_gw,d_u_oro_gw,d_v_oro_gw, & d_t_lif,d_u_lif,d_v_lif, & d_t_ec, & ! du_gwd_hines,dv_gwd_hines,d_t_hin, & dv_gwd_rando,dv_gwd_front, & east_gwstress,west_gwstress, & d_q_ch4, & ! Special RRTM ZLWFT0_i,ZSWFT0_i,ZFLDN0, & ZFLUP0,ZFSDN0,ZFSUP0, & ! topswad_aero,solswad_aero, & topswai_aero,solswai_aero, & topswad0_aero,solswad0_aero, & !LW additional toplwad_aero,sollwad_aero, & toplwai_aero,sollwai_aero, & toplwad0_aero,sollwad0_aero, & ! topsw_aero,solsw_aero, & topsw0_aero,solsw0_aero, & topswcf_aero,solswcf_aero, & tausum_aero,tau3d_aero, & drytausum_aero, & ! !variables CFMIP2/CMIP5 topswad_aerop, solswad_aerop, & topswai_aerop, solswai_aerop, & topswad0_aerop, solswad0_aerop, & topsw_aerop, topsw0_aerop, & solsw_aerop, solsw0_aerop, & topswcf_aerop, solswcf_aerop, & !LW diagnostics toplwad_aerop, sollwad_aerop, & toplwai_aerop, sollwai_aerop, & toplwad0_aerop, sollwad0_aerop, & ! ptstar, pt0, slp, & ! bils, & ! cldh, cldl,cldm, cldq, cldt, & JrNt, & dthmin, evap, fder, plcl, plfc, & prw, prlw, prsw, & s_lcl, s_pblh, s_pblt, s_therm, & cdragm, cdragh, & zustar, zu10m, zv10m, rh2m, qsat2m, & zq2m, zt2m, zn2mout, weak_inversion, & zt2m_min_mon, zt2m_max_mon, & ! pour calcul_divers.h t2m_min_mon, t2m_max_mon, & ! pour calcul_divers.h ! s_pblh_x, s_pblh_w, & s_lcl_x, s_lcl_w, & ! slab_wfbils, tpot, tpote, & ue, uq, ve, vq, zxffonte, & uwat, vwat, & zxfqcalving, zxfluxlat, & zxrunofflic, & zxtsol, snow_lsc, zxfqfonte, zxqsurf, & delta_qsurf, & rain_lsc, rain_num, & ! sens_x, sens_w, & zxfluxlat_x, zxfluxlat_w, & ! d_t_vdf_x, d_t_vdf_w, & d_q_vdf_x, d_q_vdf_w, & pbl_tke_input, tke_dissip, l_mix, wprime,& t_therm, q_therm, u_therm, v_therm, & cdragh_x, cdragh_w, & cdragm_x, cdragm_w, & kh, kh_x, kh_w, & ! wake_k, & alp_wake, & wake_h, wake_omg, & ! tendencies of delta T and delta q: d_deltat_wk, d_deltaq_wk, & ! due to wakes d_deltat_wk_gw, d_deltaq_wk_gw, & ! due to wake induced gravity waves d_deltat_vdf, d_deltaq_vdf, & ! due to vertical diffusion d_deltat_the, d_deltaq_the, & ! due to thermals d_deltat_ajs_cv, d_deltaq_ajs_cv, & ! due to dry adjustment of (w) before convection ! tendencies of wake fractional area and wake number per unit area: d_s_wk, d_dens_a_wk, d_dens_wk, & ! due to wakes !!! d_s_vdf, d_dens_a_vdf, d_dens_vdf, & ! due to vertical diffusion !!! d_s_the, d_dens_a_the, d_dens_the, & ! due to thermals ! ptconv, ratqsc, & wbeff, convoccur, zmax_th, & sens, flwp, fiwp, & alp_bl_conv,alp_bl_det, & alp_bl_fluct_m,alp_bl_fluct_tke, & alp_bl_stat, n2, s2, & proba_notrig, random_notrig, & !! cv_gen, & !moved to phys_state_var_mod ! dnwd0, & omega, & epmax_diag, & ! Deep convective variables used in phytrac pmflxr, pmflxs, & wdtrainA, wdtrainS, wdtrainM, & upwd, dnwd, & ep, & da, mp, & phi, & wght_cvfd, & phi2, & d1a, dam, & ev, & elij, & qtaa, & clw, & epmlmMm, eplaMm, & sij, & ! cldemi, & cldfra, cldtau, fiwc, & fl, re, flwc, & ref_liq, ref_ice, theta, & ref_liq_pi, ref_ice_pi, & zphi, zx_rh, zx_rhl, zx_rhi, & pmfd, pmfu, & ! t2m, fluxlat, & fsollw, evap_pot, & fsolsw, wfbils, wfbilo, & wfevap, wfrain, wfsnow, & prfl, psfl, fraca, Vprecip, & zw2, & ! fluxu, fluxv, & fluxt, & ! uwriteSTD, vwriteSTD, & !pour calcul_STDlev.h wwriteSTD, phiwriteSTD, & !pour calcul_STDlev.h qwriteSTD, twriteSTD, rhwriteSTD, & !pour calcul_STDlev.h ! beta_prec, & rneb, & zxsnow,snowhgt,qsnow,to_ice,sissnow,runoff,albsol3_lic #ifdef ISO USE phys_local_var_mod, ONLY: xt_seri,xtl_seri,xts_seri, & d_xt_eva,d_xtl_eva,d_xti_eva, & d_xt_dyn,d_xtl_dyn,d_xts_dyn, & d_xt_con, d_xt_wake, & d_xt_ajsb, d_xt_ajs, & d_xt_ajs_w, d_xt_ajs_x, & d_xt_vdf, d_xt_vdf_w, d_xt_vdf_x, & d_xt_eva, d_xt_lsc, d_xtl_lsc, d_xti_lsc, & d_xt_ch4,d_xt_prod_nucl,d_xt_cosmo,d_xt_decroiss, & zxfxtcalving, xtevap,xtprw, & xt_therm, dxtvdf_w, dxtvdf_x, & zxfxtcalving, zxfxtfonte, & zxxtrunofflic, & ! pas besoin du runoff, c'est seulement quand on couple à sisvat h1_diag,runoff_diag,xtrunoff_diag,zxxtsnow,xtVprecip,xtVprecipi, & xtrain_lsc,xtsnow_lsc,pxtrfl,pxtsfl,xtclw,d_deltaxt_wk, & d_deltaxt_the,d_deltaxt_vdf,d_deltaxt_ajs_cv, & xtwdtrainA,xtev #ifdef DIAGISO USE phys_local_var_mod, ONLY: fq_detrainement,fq_ddft,fq_fluxmasse,fq_evapprecip, & fxt_detrainement,fxt_ddft,fxt_fluxmasse,fxt_evapprecip, & f_detrainement,q_detrainement,xt_detrainement, & qlp,xtlp,qvp,xtvp,q_the,xt_the #endif #endif ! IMPLICIT NONE !>====================================================================== !! !! Auteur(s) Z.X. Li (LMD/CNRS) date: 19930818 !! !! Objet: Moniteur general de la physique du modele !!AA Modifications quant aux traceurs : !!AA - uniformisation des parametrisations ds phytrac !!AA - stockage des moyennes des champs necessaires !!AA en mode traceur off-line !!====================================================================== !! CLEFS CPP POUR LES IO !! ===================== #define histNMC !!====================================================================== !! modif ( P. Le Van , 12/10/98 ) !! !! Arguments: !! !! nlon----input-I-nombre de points horizontaux !! nlev----input-I-nombre de couches verticales, doit etre egale a klev !! debut---input-L-variable logique indiquant le premier passage !! lafin---input-L-variable logique indiquant le dernier passage !! jD_cur -R-jour courant a l'appel de la physique (jour julien) !! jH_cur -R-heure courante a l'appel de la physique (jour julien) !! pdtphys-input-R-pas d'integration pour la physique (seconde) !! paprs---input-R-pression pour chaque inter-couche (en Pa) !! pplay---input-R-pression pour le mileu de chaque couche (en Pa) !! pphi----input-R-geopotentiel de chaque couche (g z) (reference sol) !! pphis---input-R-geopotentiel du sol !! presnivs-input_R_pressions approximat. des milieux couches ( en PA) !! u-------input-R-vitesse dans la direction X (de O a E) en m/s !! v-------input-R-vitesse Y (de S a N) en m/s !! t-------input-R-temperature (K) !! qx------input-R-humidite specifique (kg/kg) et d'autres traceurs !! d_t_dyn-input-R-tendance dynamique pour "t" (K/s) !! d_q_dyn-input-R-tendance dynamique pour "q" (kg/kg/s) !! d_ql_dyn-input-R-tendance dynamique pour "ql" (kg/kg/s) !! d_qs_dyn-input-R-tendance dynamique pour "qs" (kg/kg/s) !! flxmass_w -input-R- flux de masse verticale !! d_u-----output-R-tendance physique de "u" (m/s/s) !! d_v-----output-R-tendance physique de "v" (m/s/s) !! d_t-----output-R-tendance physique de "t" (K/s) !! d_qx----output-R-tendance physique de "qx" (kg/kg/s) !! d_ps----output-R-tendance physique de la pression au sol !!====================================================================== integer jjmp1 ! parameter (jjmp1=jjm+1-1/jjm) ! => (jjmp1=nbp_lat-1/(nbp_lat-1)) ! integer iip1 ! parameter (iip1=iim+1) include "regdim.h" include "dimsoil.h" include "clesphys.h" include "thermcell.h" include "dimpft.h" !====================================================================== LOGICAL, SAVE :: ok_volcan ! pour activer les diagnostics volcaniques !$OMP THREADPRIVATE(ok_volcan) INTEGER, SAVE :: flag_volc_surfstrat ! pour imposer le cool/heat rate à la surf/strato !$OMP THREADPRIVATE(flag_volc_surfstrat) LOGICAL ok_cvl ! pour activer le nouveau driver pour convection KE PARAMETER (ok_cvl=.TRUE.) LOGICAL ok_gust ! pour activer l'effet des gust sur flux surface PARAMETER (ok_gust=.FALSE.) INTEGER, SAVE :: iflag_radia ! active ou non le rayonnement (MPL) !$OMP THREADPRIVATE(iflag_radia) !====================================================================== LOGICAL check ! Verifier la conservation du modele en eau PARAMETER (check=.FALSE.) LOGICAL ok_stratus ! Ajouter artificiellement les stratus PARAMETER (ok_stratus=.FALSE.) !====================================================================== REAL amn, amx INTEGER igout !====================================================================== ! Clef iflag_cycle_diurne controlant l'activation du cycle diurne: ! en attente du codage des cles par Fred ! iflag_cycle_diurne est initialise par conf_phys et se trouve ! dans clesphys.h (IM) !====================================================================== ! Modele thermique du sol, a activer pour le cycle diurne: !cc LOGICAL soil_model !cc PARAMETER (soil_model=.FALSE.) !====================================================================== ! Dans les versions precedentes, l'eau liquide nuageuse utilisee dans ! le calcul du rayonnement est celle apres la precipitation des nuages. ! Si cette cle new_oliq est activee, ce sera une valeur moyenne entre ! la condensation et la precipitation. Cette cle augmente les impacts ! radiatifs des nuages. !cc LOGICAL new_oliq !cc PARAMETER (new_oliq=.FALSE.) !====================================================================== ! Clefs controlant deux parametrisations de l'orographie: !c LOGICAL ok_orodr !cc PARAMETER (ok_orodr=.FALSE.) !cc LOGICAL ok_orolf !cc PARAMETER (ok_orolf=.FALSE.) !====================================================================== LOGICAL ok_journe ! sortir le fichier journalier SAVE ok_journe !$OMP THREADPRIVATE(ok_journe) ! LOGICAL ok_mensuel ! sortir le fichier mensuel SAVE ok_mensuel !$OMP THREADPRIVATE(ok_mensuel) ! LOGICAL ok_instan ! sortir le fichier instantane SAVE ok_instan !$OMP THREADPRIVATE(ok_instan) ! LOGICAL ok_LES ! sortir le fichier LES SAVE ok_LES !$OMP THREADPRIVATE(ok_LES) ! LOGICAL callstats ! sortir le fichier stats SAVE callstats !$OMP THREADPRIVATE(callstats) ! LOGICAL ok_region ! sortir le fichier regional PARAMETER (ok_region=.FALSE.) !====================================================================== REAL seuil_inversion SAVE seuil_inversion !$OMP THREADPRIVATE(seuil_inversion) INTEGER iflag_ratqs SAVE iflag_ratqs !$OMP THREADPRIVATE(iflag_ratqs) real facteur REAL wmax_th(klon) REAL tau_overturning_th(klon) INTEGER lmax_th(klon) INTEGER limbas(klon) REAL ratqscth(klon,klev) REAL ratqsdiff(klon,klev) REAL zqsatth(klon,klev) !====================================================================== ! INTEGER ivap ! indice de traceurs pour vapeur d'eau PARAMETER (ivap=1) INTEGER iliq ! indice de traceurs pour eau liquide PARAMETER (iliq=2) !CR: on ajoute la phase glace INTEGER isol ! indice de traceurs pour eau glace PARAMETER (isol=3) ! ! ! Variables argument: ! INTEGER nlon INTEGER nlev REAL,INTENT(IN) :: pdtphys_ ! NB: pdtphys to be used in physics is in time_phylmdz_mod LOGICAL debut, lafin REAL paprs(klon,klev+1) REAL pplay(klon,klev) REAL pphi(klon,klev) REAL pphis(klon) REAL presnivs(klev) !JLD REAL znivsig(klev) !JLD real pir REAL u(klon,klev) REAL v(klon,klev) REAL, intent(in):: rot(klon, klev) ! relative vorticity, in s-1, needed for frontal waves REAL t(klon,klev),thetal(klon,klev) ! thetal: ligne suivante a decommenter si vous avez les fichiers ! MPL 20130625 ! fth_fonctions.F90 et parkind1.F90 ! sinon thetal=theta ! REAL fth_thetae,fth_thetav,fth_thetal REAL qx(klon,klev,nqtot) REAL flxmass_w(klon,klev) REAL d_u(klon,klev) REAL d_v(klon,klev) REAL d_t(klon,klev) REAL d_qx(klon,klev,nqtot) REAL d_ps(klon) ! variables pour tend_to_tke REAL duadd(klon,klev) REAL dvadd(klon,klev) REAL dtadd(klon,klev) #ifndef CPP_XIOS REAL, SAVE :: missing_val=nf90_fill_real #endif !! Variables moved to phys_local_var_mod !! ! Variables pour le transport convectif !! real da(klon,klev),phi(klon,klev,klev),mp(klon,klev) !! real wght_cvfd(klon,klev) !! ! Variables pour le lessivage convectif !! ! RomP >>> !! real phi2(klon,klev,klev) !! real d1a(klon,klev),dam(klon,klev) !! real ev(klon,klev) !! real clw(klon,klev),elij(klon,klev,klev) !! real epmlmMm(klon,klev,klev),eplaMm(klon,klev) !! ! RomP <<< !IM definition dynamique o_trac dans phys_output_open ! type(ctrl_out) :: o_trac(nqtot) ! variables a une pression donnee ! include "declare_STDlev.h" ! ! include "radopt.h" ! ! INTEGER debug INTEGER n !ym INTEGER npoints !ym PARAMETER(npoints=klon) ! INTEGER nregISCtot PARAMETER(nregISCtot=1) ! ! imin_debut, nbpti, jmin_debut, nbptj : parametres pour sorties ! sur 1 region rectangulaire y compris pour 1 point ! imin_debut : indice minimum de i; nbpti : nombre de points en ! direction i (longitude) ! jmin_debut : indice minimum de j; nbptj : nombre de points en ! direction j (latitude) !JLD INTEGER imin_debut, nbpti !JLD INTEGER jmin_debut, nbptj !IM: region='3d' <==> sorties en global CHARACTER*3 region PARAMETER(region='3d') LOGICAL ok_hf ! SAVE ok_hf !$OMP THREADPRIVATE(ok_hf) INTEGER, PARAMETER :: longcles=20 REAL, SAVE :: clesphy0(longcles) !$OMP THREADPRIVATE(clesphy0) ! ! Variables propres a la physique INTEGER, SAVE :: itap ! compteur pour la physique !$OMP THREADPRIVATE(itap) INTEGER, SAVE :: abortphy=0 ! Reprere si on doit arreter en fin de phys !$OMP THREADPRIVATE(abortphy) ! REAL,SAVE :: solarlong0 !$OMP THREADPRIVATE(solarlong0) ! ! Parametres de l'Orographie a l'Echelle Sous-Maille (OESM): ! !IM 141004 REAL zulow(klon),zvlow(klon),zustr(klon), zvstr(klon) REAL zulow(klon),zvlow(klon) ! INTEGER igwd,idx(klon),itest(klon) ! ! REAL,allocatable,save :: run_off_lic_0(:) ! !$OMP THREADPRIVATE(run_off_lic_0) !ym SAVE run_off_lic_0 !KE43 ! Variables liees a la convection de K. Emanuel (sb): ! REAL, SAVE :: bas, top ! cloud base and top levels !$OMP THREADPRIVATE(bas, top) !------------------------------------------------------------------ ! Upmost level reached by deep convection and related variable (jyg) ! INTEGER izero INTEGER k_upper_cv !------------------------------------------------------------------ ! Compteur de l'occurence de cvpas=1 INTEGER Ncvpaseq1 SAVE Ncvpaseq1 !$OMP THREADPRIVATE(Ncvpaseq1) ! !========================================================================== !CR04.12.07: on ajoute les nouvelles variables du nouveau schema !de convection avec poches froides ! Variables li\'ees \`a la poche froide (jyg) !! REAL mipsh(klon,klev) ! mass flux shed by the adiab ascent at each level !! Moved to phys_state_var_mod ! REAL wape_prescr, fip_prescr INTEGER it_wape_prescr SAVE wape_prescr, fip_prescr, it_wape_prescr !$OMP THREADPRIVATE(wape_prescr, fip_prescr, it_wape_prescr) ! ! variables supplementaires de concvl REAL Tconv(klon,klev) !! variable moved to phys_local_var_mod !! REAL sij(klon,klev,klev) !! ! !! ! variables pour tester la conservation de l'energie dans concvl !! REAL, DIMENSION(klon,klev) :: d_t_con_sat !! REAL, DIMENSION(klon,klev) :: d_q_con_sat !! REAL, DIMENSION(klon,klev) :: dql_sat REAL, SAVE :: alp_bl_prescr=0. REAL, SAVE :: ale_bl_prescr=0. REAL, SAVE :: wake_s_min_lsp=0.1 !$OMP THREADPRIVATE(alp_bl_prescr,ale_bl_prescr) !$OMP THREADPRIVATE(wake_s_min_lsp) REAL ok_wk_lsp(klon) !RC ! Variables li\'ees \`a la poche froide (jyg et rr) INTEGER, SAVE :: iflag_wake_tend ! wake: if =0, then wake state variables are ! updated within calwake !$OMP THREADPRIVATE(iflag_wake_tend) INTEGER, SAVE :: iflag_alp_wk_cond=0 ! wake: if =0, then Alp_wk is the average lifting ! power provided by the wakes; else, Alp_wk is the ! lifting power conditionned on the presence of a ! gust-front in the grid cell. !$OMP THREADPRIVATE(iflag_alp_wk_cond) REAL t_w(klon,klev),q_w(klon,klev) ! temperature and moisture profiles in the wake region REAL t_x(klon,klev),q_x(klon,klev) ! temperature and moisture profiles in the off-wake region REAL wake_dth(klon,klev) ! wake : temp pot difference REAL wake_omgbdth(klon,klev) ! Wake : flux of Delta_Theta ! transported by LS omega REAL wake_dp_omgb(klon,klev) ! Wake : vertical gradient of ! large scale omega REAL wake_dtKE(klon,klev) ! Wake : differential heating ! (wake - unpertubed) CONV REAL wake_dqKE(klon,klev) ! Wake : differential moistening ! (wake - unpertubed) CONV REAL wake_dp_deltomg(klon,klev) ! Wake : gradient vertical de wake_omg REAL wake_spread(klon,klev) ! spreading term in wake_delt ! !pourquoi y'a pas de save?? ! !!! INTEGER, SAVE, DIMENSION(klon) :: wake_k !!! !$OMP THREADPRIVATE(wake_k) #ifdef ISO REAL xt_x(ntraciso,klon,klev) REAL xt_w(ntraciso,klon,klev) #endif ! !jyg< !cc REAL wake_pe(klon) ! Wake potential energy - WAPE !>jyg REAL wake_fip_0(klon) ! Average Front Incoming Power (unconditionned) REAL wake_gfl(klon) ! Gust Front Length !!! REAL wake_dens(klon) ! moved to phys_state_var_mod ! ! REAL dt_dwn(klon,klev) REAL dq_dwn(klon,klev) REAL M_dwn(klon,klev) REAL M_up(klon,klev) REAL dt_a(klon,klev) REAL dq_a(klon,klev) REAL d_t_adjwk(klon,klev) !jyg REAL d_q_adjwk(klon,klev) !jyg LOGICAL,SAVE :: ok_adjwk=.FALSE. !$OMP THREADPRIVATE(ok_adjwk) INTEGER,SAVE :: iflag_adjwk=0 !jyg !$OMP THREADPRIVATE(iflag_adjwk) !jyg REAL,SAVE :: oliqmax=999.,oicemax=999. !$OMP THREADPRIVATE(oliqmax,oicemax) REAL, SAVE :: alp_offset !$OMP THREADPRIVATE(alp_offset) REAL, SAVE :: dtcon_multistep_max=1.e6 !$OMP THREADPRIVATE(dtcon_multistep_max) REAL, SAVE :: dqcon_multistep_max=1.e6 !$OMP THREADPRIVATE(dqcon_multistep_max) #ifdef ISO REAL dxt_dwn(ntraciso,klon,klev) REAL dxt_a(ntraciso,klon,klev) REAL d_xt_adjwk(ntraciso,klon,klev) #endif ! !RR:fin declarations poches froides !========================================================================== REAL ztv(klon,klev),ztva(klon,klev) REAL zpspsk(klon,klev) REAL ztla(klon,klev),zqla(klon,klev) REAL zthl(klon,klev) !cc nrlmd le 10/04/2012 !--------Stochastic Boundary Layer Triggering: ALE_BL-------- !---Propri\'et\'es du thermiques au LCL real zlcl_th(klon) ! Altitude du LCL calcul\'e ! continument (pcon dans ! thermcell_main.F90) real fraca0(klon) ! Fraction des thermiques au LCL real w0(klon) ! Vitesse des thermiques au LCL real w_conv(klon) ! Vitesse verticale de grande \'echelle au LCL real tke0(klon,klev+1) ! TKE au d\'ebut du pas de temps real therm_tke_max0(klon) ! TKE dans les thermiques au LCL real env_tke_max0(klon) ! TKE dans l'environnement au LCL !JLD !---D\'eclenchement stochastique !JLD integer :: tau_trig(klon) REAL,SAVE :: random_notrig_max=1. !$OMP THREADPRIVATE(random_notrig_max) !--------Statistical Boundary Layer Closure: ALP_BL-------- !---Profils de TKE dans et hors du thermique real therm_tke_max(klon,klev) ! Profil de TKE dans les thermiques real env_tke_max(klon,klev) ! Profil de TKE dans l'environnement !-------Activer les tendances de TKE due a l'orograp??ie--------- INTEGER, SAVE :: addtkeoro !$OMP THREADPRIVATE(addtkeoro) REAL, SAVE :: alphatkeoro !$OMP THREADPRIVATE(alphatkeoro) LOGICAL, SAVE :: smallscales_tkeoro !$OMP THREADPRIVATE(smallscales_tkeoro) !cc fin nrlmd le 10/04/2012 ! Variables locales pour la couche limite (al1): ! !Al1 REAL pblh(klon) ! Hauteur de couche limite !Al1 SAVE pblh !34EK ! ! Variables locales: ! !AA !AA Pour phytrac REAL u1(klon) ! vents dans la premiere couche U REAL v1(klon) ! vents dans la premiere couche V !@$$ LOGICAL offline ! Controle du stockage ds "physique" !@$$ PARAMETER (offline=.false.) !@$$ INTEGER physid REAL frac_impa(klon,klev) ! fractions d'aerosols lessivees (impaction) REAL frac_nucl(klon,klev) ! idem (nucleation) ! RomP >>> REAL beta_prec_fisrt(klon,klev) ! taux de conv de l'eau cond (fisrt) ! RomP <<< REAL :: calday !IM cf FH pour Tiedtke 080604 REAL rain_tiedtke(klon),snow_tiedtke(klon) ! !IM 050204 END REAL devap(klon) ! evaporation et sa derivee REAL dsens(klon) ! chaleur sensible et sa derivee #ifdef ISO REAL dxtevap(ntraciso,klon) #endif ! ! Conditions aux limites ! ! REAL :: day_since_equinox ! Date de l'equinoxe de printemps INTEGER, parameter :: mth_eq=3, day_eq=21 REAL :: jD_eq LOGICAL, parameter :: new_orbit = .TRUE. ! INTEGER lmt_pas SAVE lmt_pas ! frequence de mise a jour !$OMP THREADPRIVATE(lmt_pas) real zmasse(klon, nbp_lev),exner(klon, nbp_lev) ! (column-density of mass of air in a cell, in kg m-2) real, parameter:: dobson_u = 2.1415e-05 ! Dobson unit, in kg m-2 !IM sorties REAL un_jour PARAMETER(un_jour=86400.) INTEGER itapm1 !pas de temps de la physique du(es) mois precedents SAVE itapm1 !mis a jour le dernier pas de temps du mois en cours !$OMP THREADPRIVATE(itapm1) !====================================================================== ! ! Declaration des procedures appelees ! EXTERNAL angle ! calculer angle zenithal du soleil EXTERNAL alboc ! calculer l'albedo sur ocean EXTERNAL ajsec ! ajustement sec EXTERNAL conlmd ! convection (schema LMD) !KE43 EXTERNAL conema3 ! convect4.3 EXTERNAL fisrtilp ! schema de condensation a grande echelle (pluie) !AA ! JBM (3/14) fisrtilp_tr not loaded ! EXTERNAL fisrtilp_tr ! schema de condensation a grande echelle (pluie) ! ! stockage des coefficients necessaires au ! ! lessivage OFF-LINE et ON-LINE EXTERNAL hgardfou ! verifier les temperatures EXTERNAL nuage ! calculer les proprietes radiatives !C EXTERNAL o3cm ! initialiser l'ozone EXTERNAL orbite ! calculer l'orbite terrestre EXTERNAL phyetat0 ! lire l'etat initial de la physique EXTERNAL phyredem ! ecrire l'etat de redemarrage de la physique EXTERNAL suphel ! initialiser certaines constantes EXTERNAL transp ! transport total de l'eau et de l'energie !IM EXTERNAL haut2bas !variables de haut en bas EXTERNAL ini_undefSTD !initialise a 0 une variable a 1 niveau de pression EXTERNAL undefSTD !somme les valeurs definies d'1 var a 1 niveau de pression ! EXTERNAL moy_undefSTD !moyenne d'1 var a 1 niveau de pression ! EXTERNAL moyglo_aire ! moyenne globale d'1 var ponderee par l'aire de la maille (moyglo_pondaire) ! par la masse/airetot (moyglo_pondaima) et la vraie masse (moyglo_pondmass) ! ! ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! Local variables ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! REAL rhcl(klon,klev) ! humiditi relative ciel clair REAL dialiq(klon,klev) ! eau liquide nuageuse REAL diafra(klon,klev) ! fraction nuageuse REAL cldliq(klon,klev) ! eau liquide nuageuse ! !XXX PB REAL fluxq(klon,klev, nbsrf) ! flux turbulent d'humidite ! REAL zxfluxt(klon, klev) REAL zxfluxq(klon, klev) REAL zxfluxu(klon, klev) REAL zxfluxv(klon, klev) #ifdef ISO real fluxxt(ntraciso,klon,klev, nbsrf) REAL zxfluxxt(ntraciso,klon, klev) #endif ! Le rayonnement n'est pas calcule tous les pas, il faut donc ! sauvegarder les sorties du rayonnement !ym SAVE heat,cool,albpla,topsw,toplw,solsw,sollw,sollwdown !ym SAVE sollwdownclr, toplwdown, toplwdownclr !ym SAVE topsw0,toplw0,solsw0,sollw0, heat0, cool0 ! INTEGER itaprad SAVE itaprad !$OMP THREADPRIVATE(itaprad) ! REAL conv_q(klon,klev) ! convergence de l'humidite (kg/kg/s) REAL conv_t(klon,klev) ! convergence de la temperature(K/s) ! #ifdef INCA REAL zxsnow_dummy(klon) #endif REAL zsav_tsol(klon) ! REAL dist, rmu0(klon), fract(klon) REAL zrmu0(klon), zfract(klon) REAL zdtime, zdtime1, zdtime2, zlongi ! REAL qcheck REAL z_avant(klon), z_apres(klon), z_factor(klon) LOGICAL zx_ajustq ! REAL za REAL zx_t, zx_qs, zdelta, zcor real zqsat(klon,klev) ! INTEGER i, k, iq, j, nsrf, ll, l INTEGER itr ! C Risi #ifdef ISO real zxt_apres(ntraciso,klon) REAL xt_iso(klon,klev),xtl_iso(klon,klev) REAL zxt_factor(ntraciso,klon),zxt_avant(ntraciso,klon) INTEGER ixt real wake_deltaq_prec(klon,klev) #endif ! REAL t_coup PARAMETER (t_coup=234.0) !ym A voir plus tard !! !ym REAL zx_relief(iim,jjmp1) !ym REAL zx_aire(iim,jjmp1) ! ! Grandeurs de sorties REAL s_capCL(klon) REAL s_oliqCL(klon), s_cteiCL(klon) REAL s_trmb1(klon), s_trmb2(klon) REAL s_trmb3(klon) ! La convection n'est pas calculee tous les pas, il faut donc ! sauvegarder les sorties de la convection !ym SAVE !ym SAVE !ym SAVE ! INTEGER itapcv, itapwk SAVE itapcv, itapwk !$OMP THREADPRIVATE(itapcv, itapwk) !KE43 ! Variables locales pour la convection de K. Emanuel (sb): REAL tvp(klon,klev) ! virtual temp of lifted parcel CHARACTER*40 capemaxcels !max(CAPE) REAL rflag(klon) ! flag fonctionnement de convect INTEGER iflagctrl(klon) ! flag fonctionnement de convect ! -- convect43: INTEGER ntra ! nb traceurs pour convect4.3 REAL dtvpdt1(klon,klev), dtvpdq1(klon,klev) REAL dplcldt(klon), dplcldr(klon) !? . condm_con(klon,klev),conda_con(klon,klev), !? . mr_con(klon,klev),ep_con(klon,klev) !? . ,sadiab(klon,klev),wadiab(klon,klev) ! -- !34EK ! ! Variables du changement ! ! con: convection ! lsc: condensation a grande echelle (Large-Scale-Condensation) ! ajs: ajustement sec ! eva: evaporation de l'eau liquide nuageuse ! vdf: couche limite (Vertical DiFfusion) ! ! tendance nulles REAL, dimension(klon,klev):: du0, dv0, dt0, dq0, dql0, dqi0 #ifdef ISO REAL, dimension(ntraciso,klon,klev):: dxt0, dxtl0, dxti0 #endif REAL, dimension(klon) :: dsig0, ddens0 INTEGER, dimension(klon) :: wkoccur1 ! tendance buffer pour appel de add_phys_tend REAL, DIMENSION(klon,klev) :: d_q_ch4_dtime #ifdef ISO REAL, DIMENSION(ntraciso,klon,klev) :: d_xt_ch4_dtime #endif ! ! Flag pour pouvoir ne pas ajouter les tendances. ! Par defaut, les tendances doivente etre ajoutees et ! flag_inhib_tend = 0 ! flag_inhib_tend > 0 : tendances non ajoutees, avec un nombre ! croissant de print quand la valeur du flag augmente !!! attention, ce flag doit etre change avec prudence !!! INTEGER :: flag_inhib_tend = 0 ! 0 is the default value !! INTEGER :: flag_inhib_tend = 2 ! ! Logical switch to a bug : reseting to 0 convective variables at the ! begining of physiq. LOGICAL, SAVE :: ok_bug_cv_trac = .TRUE. !$OMP THREADPRIVATE(ok_bug_cv_trac) ! ! Logical switch to a bug : changing wake_deltat when thermals are active ! even when there are no wakes. LOGICAL, SAVE :: ok_bug_split_th = .TRUE. !$OMP THREADPRIVATE(ok_bug_split_th) ! !******************************************************** ! declarations !******************************************************** !IM 081204 END ! REAL pen_u(klon,klev), pen_d(klon,klev) REAL pde_u(klon,klev), pde_d(klon,klev) INTEGER kcbot(klon), kctop(klon), kdtop(klon) ! REAL ratqsbas,ratqshaut,tau_ratqs SAVE ratqsbas,ratqshaut,tau_ratqs !$OMP THREADPRIVATE(ratqsbas,ratqshaut,tau_ratqs) REAL, SAVE :: ratqsp0=50000., ratqsdp=20000. !$OMP THREADPRIVATE(ratqsp0, ratqsdp) ! Parametres lies au nouveau schema de nuages (SB, PDF) REAL, SAVE :: fact_cldcon REAL, SAVE :: facttemps !$OMP THREADPRIVATE(fact_cldcon,facttemps) LOGICAL, SAVE :: ok_newmicro !$OMP THREADPRIVATE(ok_newmicro) INTEGER, SAVE :: iflag_cld_th !$OMP THREADPRIVATE(iflag_cld_th) !IM logical ptconv(klon,klev) !passe dans phys_local_var_mod !IM cf. AM 081204 BEG LOGICAL ptconvth(klon,klev) REAL picefra(klon,klev) !IM cf. AM 081204 END ! ! Variables liees a l'ecriture de la bande histoire physique ! !====================================================================== ! ! !JLD integer itau_w ! pas de temps ecriture = itap + itau_phy ! ! ! Variables locales pour effectuer les appels en serie ! !IM RH a 2m (la surface) REAL Lheat INTEGER length PARAMETER ( length = 100 ) REAL tabcntr0( length ) ! !JLD INTEGER ndex2d(nbp_lon*nbp_lat) !IM ! !IM AMIP2 BEG !JLD REAL moyglo, mountor !IM 141004 BEG REAL zustrdr(klon), zvstrdr(klon) REAL zustrli(klon), zvstrli(klon) REAL zustrph(klon), zvstrph(klon) REAL aam, torsfc !IM 141004 END !IM 190504 BEG ! INTEGER imp1jmp1 ! PARAMETER(imp1jmp1=(iim+1)*jjmp1) !ym A voir plus tard ! REAL zx_tmp((nbp_lon+1)*nbp_lat) ! REAL airedyn(nbp_lon+1,nbp_lat) !IM 190504 END !JLD LOGICAL ok_msk !JLD REAL msk(klon) !ym A voir plus tard !ym REAL zm_wo(jjmp1, klev) !IM AMIP2 END ! REAL zx_tmp_fi2d(klon) ! variable temporaire grille physique REAL zx_tmp_fi3d(klon,klev) ! variable temporaire pour champs 3D !JLD REAL zx_tmp_2d(nbp_lon,nbp_lat) !JLD REAL zx_lon(nbp_lon,nbp_lat) !JLD REAL zx_lat(nbp_lon,nbp_lat) ! INTEGER nid_ctesGCM SAVE nid_ctesGCM !$OMP THREADPRIVATE(nid_ctesGCM) ! !IM 280405 BEG ! INTEGER nid_bilKPins, nid_bilKPave ! SAVE nid_bilKPins, nid_bilKPave ! !$OMP THREADPRIVATE(nid_bilKPins, nid_bilKPave) ! REAL ve_lay(klon,klev) ! transport meri. de l'energie a chaque niveau vert. REAL vq_lay(klon,klev) ! transport meri. de l'eau a chaque niveau vert. REAL ue_lay(klon,klev) ! transport zonal de l'energie a chaque niveau vert. REAL uq_lay(klon,klev) ! transport zonal de l'eau a chaque niveau vert. ! !JLD REAL zjulian !JLD SAVE zjulian !JLD!$OMP THREADPRIVATE(zjulian) !JLD INTEGER nhori, nvert !JLD REAL zsto !JLD REAL zstophy, zout CHARACTER*20 modname CHARACTER*80 abort_message LOGICAL, SAVE :: ok_sync, ok_sync_omp !$OMP THREADPRIVATE(ok_sync) REAL date0 ! essai writephys INTEGER fid_day, fid_mth, fid_ins PARAMETER (fid_ins = 1, fid_day = 2, fid_mth = 3) INTEGER prof2d_on, prof3d_on, prof2d_av, prof3d_av PARAMETER (prof2d_on = 1, prof3d_on = 2, prof2d_av = 3, prof3d_av = 4) REAL ztsol(klon) REAL q2m(klon,nbsrf) ! humidite a 2m #ifdef ISO REAL d_xtw(ntraciso),d_xtl(ntraciso), d_xts(ntraciso) #endif !IM: t2m, q2m, ustar, u10m, v10m et t2mincels, t2maxcels CHARACTER*40 t2mincels, t2maxcels !t2m min., t2m max CHARACTER*40 tinst, tave REAL cldtaupi(klon,klev) ! Cloud optical thickness for ! pre-industrial (pi) aerosols INTEGER :: naero ! Aerosol optical properties CHARACTER*4, DIMENSION(naero_grp) :: rfname REAL, DIMENSION(klon,klev) :: mass_solu_aero ! total mass ! concentration ! for all soluble ! aerosols[ug/m3] REAL, DIMENSION(klon,klev) :: mass_solu_aero_pi ! - " - (pre-industrial value) ! Parameters LOGICAL ok_ade, ok_aie ! Apply aerosol (in)direct effects or not LOGICAL ok_alw ! Apply aerosol LW effect or not LOGICAL ok_cdnc ! ok cloud droplet number concentration (O. Boucher 01-2013) REAL bl95_b0, bl95_b1 ! Parameter in Boucher and Lohmann (1995) SAVE ok_ade, ok_aie, ok_alw, ok_cdnc, bl95_b0, bl95_b1 !$OMP THREADPRIVATE(ok_ade, ok_aie, ok_alw, ok_cdnc, bl95_b0, bl95_b1) LOGICAL, SAVE :: aerosol_couple ! true : calcul des aerosols dans INCA ! false : lecture des aerosol dans un fichier !$OMP THREADPRIVATE(aerosol_couple) LOGICAL, SAVE :: chemistry_couple ! true : use INCA chemistry O3 ! false : use offline chemistry O3 !$OMP THREADPRIVATE(chemistry_couple) INTEGER, SAVE :: flag_aerosol !$OMP THREADPRIVATE(flag_aerosol) LOGICAL, SAVE :: flag_bc_internal_mixture !$OMP THREADPRIVATE(flag_bc_internal_mixture) ! !--STRAT AEROSOL INTEGER, SAVE :: flag_aerosol_strat !$OMP THREADPRIVATE(flag_aerosol_strat) ! !--INTERACTIVE AEROSOL FEEDBACK ON RADIATION LOGICAL, SAVE :: flag_aer_feedback !$OMP THREADPRIVATE(flag_aer_feedback) !c-fin STRAT AEROSOL ! ! Declaration des constantes et des fonctions thermodynamiques ! LOGICAL,SAVE :: first=.TRUE. !$OMP THREADPRIVATE(first) ! VARIABLES RELATED TO OZONE CLIMATOLOGIES ; all are OpenMP shared ! Note that pressure vectors are in Pa and in stricly ascending order INTEGER,SAVE :: read_climoz ! Read ozone climatology ! (let it keep the default OpenMP shared attribute) ! Allowed values are 0, 1 and 2 ! 0: do not read an ozone climatology ! 1: read a single ozone climatology that will be used day and night ! 2: read two ozone climatologies, the average day and night ! climatology and the daylight climatology INTEGER,SAVE :: ncid_climoz ! NetCDF file identifier REAL, POINTER, SAVE :: press_cen_climoz(:) ! Pressure levels REAL, POINTER, SAVE :: press_edg_climoz(:) ! Edges of pressure intervals REAL, POINTER, SAVE :: time_climoz(:) ! Time vector CHARACTER(LEN=13), PARAMETER :: vars_climoz(2) & = ["tro3 ","tro3_daylight"] ! vars_climoz(1:read_climoz): variables names in climoz file. ! vars_climoz(1:read_climoz-2) if read_climoz>2 (temporary) REAL :: ro3i ! 0<=ro3i<=360 ; required time index in NetCDF file for ! the ozone fields, old method. include "YOMCST.h" include "YOETHF.h" include "FCTTRE.h" !IM 100106 BEG : pouvoir sortir les ctes de la physique include "conema3.h" include "fisrtilp.h" include "nuage.h" include "compbl.h" !IM 100106 END : pouvoir sortir les ctes de la physique ! ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! Declarations pour Simulateur COSP !============================================================ real :: mr_ozone(klon,klev), phicosp(klon,klev) !IM stations CFMIP INTEGER, SAVE :: nCFMIP !$OMP THREADPRIVATE(nCFMIP) INTEGER, PARAMETER :: npCFMIP=120 INTEGER, ALLOCATABLE, SAVE :: tabCFMIP(:) REAL, ALLOCATABLE, SAVE :: lonCFMIP(:), latCFMIP(:) !$OMP THREADPRIVATE(tabCFMIP, lonCFMIP, latCFMIP) INTEGER, ALLOCATABLE, SAVE :: tabijGCM(:) REAL, ALLOCATABLE, SAVE :: lonGCM(:), latGCM(:) !$OMP THREADPRIVATE(tabijGCM, lonGCM, latGCM) INTEGER, ALLOCATABLE, SAVE :: iGCM(:), jGCM(:) !$OMP THREADPRIVATE(iGCM, jGCM) logical, dimension(nfiles) :: phys_out_filestations logical, parameter :: lNMC=.FALSE. !IM betaCRF REAL, SAVE :: pfree, beta_pbl, beta_free !$OMP THREADPRIVATE(pfree, beta_pbl, beta_free) REAL, SAVE :: lon1_beta, lon2_beta, lat1_beta, lat2_beta !$OMP THREADPRIVATE(lon1_beta, lon2_beta, lat1_beta, lat2_beta) LOGICAL, SAVE :: mskocean_beta !$OMP THREADPRIVATE(mskocean_beta) REAL, dimension(klon, klev) :: beta ! facteur sur cldtaurad et ! cldemirad pour evaluer les ! retros liees aux CRF REAL, dimension(klon, klev) :: cldtaurad ! epaisseur optique ! pour radlwsw pour ! tester "CRF off" REAL, dimension(klon, klev) :: cldtaupirad ! epaisseur optique ! pour radlwsw pour ! tester "CRF off" REAL, dimension(klon, klev) :: cldemirad ! emissivite pour ! radlwsw pour tester ! "CRF off" REAL, dimension(klon, klev) :: cldfrarad ! fraction nuageuse #ifdef INCA ! set de variables utilisees pour l'initialisation des valeurs provenant de INCA REAL, DIMENSION(klon,klev,naero_grp,nbands) :: init_tauinca REAL, DIMENSION(klon,klev,naero_grp,nbands) :: init_pizinca REAL, DIMENSION(klon,klev,naero_grp,nbands) :: init_cginca REAL, DIMENSION(klon,klev,nbands) :: init_ccminca #endif REAL, DIMENSION(klon,nbtr) :: init_source !lwoff=y : offset LW CRE for radiation code and other schemes REAL, SAVE :: betalwoff !OMP THREADPRIVATE(betalwoff) ! INTEGER :: nbtr_tmp ! Number of tracer inside concvl REAL, dimension(klon,klev) :: sh_in ! Specific humidity entering in phytrac REAL, dimension(klon,klev) :: ch_in ! Condensed humidity entering in phytrac (eau liquide) integer iostat REAL, dimension(klon,klev+1) :: tke_dissip_ave, l_mix_ave, wprime_ave REAL zzz !albedo SB >>> REAL,DIMENSION(6), SAVE :: SFRWL !$OMP THREADPRIVATE(SFRWL) !albedo SB <<< !--OB variables for mass fixer (hard coded for now) LOGICAL, PARAMETER :: mass_fixer=.FALSE. REAL qql1(klon),qql2(klon),corrqql #ifdef ISO real xtql1(ntraciso,klon),xtql2(ntraciso,klon),corrxtql(ntraciso) #endif REAL pi pi = 4. * ATAN(1.) ! Ehouarn: set value of jjmp1 since it is no longer a "fixed parameter" jjmp1=nbp_lat !====================================================================== ! Gestion calendrier : mise a jour du module phys_cal_mod ! pdtphys=pdtphys_ CALL update_time(pdtphys) phys_tstep=NINT(pdtphys) #ifdef CPP_XIOS IF (.NOT. debut .AND. is_omp_master) CALL xios_update_calendar(itap+1) #endif !====================================================================== ! Ecriture eventuelle d'un profil verticale en entree de la physique. ! Utilise notamment en 1D mais peut etre active egalement en 3D ! en imposant la valeur de igout. !======================================================================d IF (prt_level.ge.1) THEN igout=klon/2+1/klon write(lunout,*) 'DEBUT DE PHYSIQ !!!!!!!!!!!!!!!!!!!!' write(lunout,*) 'igout, lat, lon ',igout, latitude_deg(igout), & longitude_deg(igout) write(lunout,*) & 'nlon,klev,nqtot,debut,lafin, jD_cur, jH_cur,pdtphys' write(lunout,*) & nlon,klev,nqtot,debut,lafin, jD_cur, jH_cur,pdtphys write(lunout,*) 'paprs, play, phi, u, v, t' DO k=1,klev write(lunout,*) paprs(igout,k),pplay(igout,k),pphi(igout,k), & u(igout,k),v(igout,k),t(igout,k) ENDDO write(lunout,*) 'ovap (g/kg), oliq (g/kg)' DO k=1,klev write(lunout,*) qx(igout,k,1)*1000,qx(igout,k,2)*1000. ENDDO ENDIF ! Quick check on pressure levels: CALL assert(paprs(:, nbp_lev + 1) < paprs(:, nbp_lev), & "physiq_mod paprs bad order") IF (first) THEN CALL init_etat0_limit_unstruct IF (.NOT. create_etat0_limit) CALL init_limit_read(days_elapsed) !CR:nvelles variables convection/poches froides WRITE(lunout,*) '=================================================' WRITE(lunout,*) 'Allocation des variables locales et sauvegardees' WRITE(lunout,*) '=================================================' CALL phys_local_var_init ! ! appel a la lecture du run.def physique CALL conf_phys(ok_journe, ok_mensuel, & ok_instan, ok_hf, & ok_LES, & callstats, & solarlong0,seuil_inversion, & fact_cldcon, facttemps,ok_newmicro,iflag_radia, & iflag_cld_th,iflag_ratqs,ratqsbas,ratqshaut,tau_ratqs, & ok_ade, ok_aie, ok_alw, ok_cdnc, ok_volcan, flag_volc_surfstrat, aerosol_couple, & chemistry_couple, flag_aerosol, flag_aerosol_strat, flag_aer_feedback, & flag_bc_internal_mixture, bl95_b0, bl95_b1, & ! nv flags pour la convection et les ! poches froides read_climoz, & alp_offset) CALL phys_state_var_init(read_climoz) CALL phys_output_var_init IF (read_climoz>=1 .AND. create_etat0_limit .AND. grid_type==unstructured) & CALL regr_horiz_time_climoz(read_climoz,ok_daily_climoz) #ifdef CPP_StratAer CALL strataer_init #endif print*, '=================================================' ! !CR: check sur le nb de traceurs de l eau IF ((iflag_ice_thermo.gt.0).and.(nqo==2)) THEN WRITE (lunout, *) ' iflag_ice_thermo==1 requires 3 H2O tracers ', & '(H2Ov, H2Ol, H2Oi) but nqo=', nqo, '. Might as well stop here.' abort_message='see above' CALL abort_physic(modname,abort_message,1) ENDIF Ncvpaseq1 = 0 dnwd0=0.0 ftd=0.0 fqd=0.0 cin=0. !ym Attention pbase pas initialise dans concvl !!!! pbase=0 !IM 180608 itau_con=0 first=.FALSE. ENDIF ! first !ym => necessaire pour iflag_con != 2 pmfd(:,:) = 0. pen_u(:,:) = 0. pen_d(:,:) = 0. pde_d(:,:) = 0. pde_u(:,:) = 0. aam=0. d_t_adjwk(:,:)=0 d_q_adjwk(:,:)=0 #ifdef ISO d_xt_adjwk(:,:,:)=0 #endif alp_bl_conv(:)=0. torsfc=0. forall (k=1: nbp_lev) zmasse(:, k) = (paprs(:, k)-paprs(:, k+1)) / rg modname = 'physiq' IF (debut) THEN CALL suphel ! initialiser constantes et parametres phys. ! tau_gl : constante de rappel de la temperature a la surface de la glace - en tau_gl=5. CALL getin_p('tau_gl', tau_gl) ! tau_gl : constante de rappel de la temperature a la surface de la glace - en ! secondes tau_gl=86400.*tau_gl WRITE(lunout,*) 'debut physiq_mod tau_gl=',tau_gl CALL getin_p('iflag_alp_wk_cond', iflag_alp_wk_cond) CALL getin_p('random_notrig_max',random_notrig_max) CALL getin_p('ok_adjwk',ok_adjwk) IF (ok_adjwk) iflag_adjwk=2 ! for compatibility with older versions ! iflag_adjwk: ! 0 = Default: no convective adjustment of w-region ! 1 => convective adjustment but state variables are unchanged ! 2 => convective adjustment and state variables are changed CALL getin_p('iflag_adjwk',iflag_adjwk) CALL getin_p('dtcon_multistep_max',dtcon_multistep_max) CALL getin_p('dqcon_multistep_max',dqcon_multistep_max) CALL getin_p('oliqmax',oliqmax) CALL getin_p('oicemax',oicemax) CALL getin_p('ratqsp0',ratqsp0) CALL getin_p('ratqsdp',ratqsdp) iflag_wake_tend = 0 CALL getin_p('iflag_wake_tend',iflag_wake_tend) ok_bad_ecmwf_thermo=.TRUE. ! By default thermodynamical constants are set ! in rrtm/suphec.F90 (and rvtmp2 is set to 0). CALL getin_p('ok_bad_ecmwf_thermo',ok_bad_ecmwf_thermo) CALL getin_p('ok_bug_cv_trac',ok_bug_cv_trac) CALL getin_p('ok_bug_split_th',ok_bug_split_th) fl_ebil = 0 ! by default, conservation diagnostics are desactivated CALL getin_p('fl_ebil',fl_ebil) fl_cor_ebil = 0 ! by default, no correction to ensure energy conservation CALL getin_p('fl_cor_ebil',fl_cor_ebil) iflag_phytrac = 1 ! by default we do want to call phytrac CALL getin_p('iflag_phytrac',iflag_phytrac) #ifdef CPP_Dust IF (iflag_phytrac.EQ.0) THEN WRITE(lunout,*) 'In order to run with SPLA, iflag_phytrac will be forced to 1' iflag_phytrac = 1 ENDIF #endif nvm_lmdz = 13 CALL getin_p('NVM',nvm_lmdz) WRITE(lunout,*) 'iflag_alp_wk_cond=', iflag_alp_wk_cond WRITE(lunout,*) 'random_ntrig_max=', random_notrig_max WRITE(lunout,*) 'ok_adjwk=', ok_adjwk WRITE(lunout,*) 'iflag_adjwk=', iflag_adjwk WRITE(lunout,*) 'qtcon_multistep_max=',dtcon_multistep_max WRITE(lunout,*) 'qdcon_multistep_max=',dqcon_multistep_max WRITE(lunout,*) 'ratqsp0=', ratqsp0 WRITE(lunout,*) 'ratqsdp=', ratqsdp WRITE(lunout,*) 'iflag_wake_tend=', iflag_wake_tend WRITE(lunout,*) 'ok_bad_ecmwf_thermo=',ok_bad_ecmwf_thermo WRITE(lunout,*) 'ok_bug_cv_trac=', ok_bug_cv_trac WRITE(lunout,*) 'ok_bug_split_th=', ok_bug_split_th WRITE(lunout,*) 'fl_ebil=', fl_ebil WRITE(lunout,*) 'fl_cor_ebil=', fl_cor_ebil WRITE(lunout,*) 'iflag_phytrac=', iflag_phytrac WRITE(lunout,*) 'NVM=', nvm_lmdz !--PC: defining fields to be exchanged between LMDz, ORCHIDEE and NEMO WRITE(lunout,*) 'Call to infocfields from physiq' CALL infocfields_init ENDIF IF (prt_level.ge.1) print *,'CONVERGENCE PHYSIQUE THERM 1 ' !====================================================================== ! Gestion calendrier : mise a jour du module phys_cal_mod ! ! CALL phys_cal_update(jD_cur,jH_cur) ! ! Si c'est le debut, il faut initialiser plusieurs choses ! ******** ! IF (debut) THEN !rv CRinitialisation de wght_th et lalim_conv pour la !definition de la couche alimentation de la convection a partir !des caracteristiques du thermique wght_th(:,:)=1. lalim_conv(:)=1 !RC ustar(:,:)=0. ! u10m(:,:)=0. ! v10m(:,:)=0. rain_con(:)=0. snow_con(:)=0. topswai(:)=0. topswad(:)=0. solswai(:)=0. solswad(:)=0. wmax_th(:)=0. tau_overturning_th(:)=0. IF (type_trac == 'inca' .OR. type_trac == 'inco') THEN ! jg : initialisation jusqu'au ces variables sont dans restart ccm(:,:,:) = 0. tau_aero(:,:,:,:) = 0. piz_aero(:,:,:,:) = 0. cg_aero(:,:,:,:) = 0. config_inca='none' ! default CALL getin_p('config_inca',config_inca) ELSE config_inca='none' ! default ENDIF tau_aero(:,:,:,:) = 1.e-15 piz_aero(:,:,:,:) = 1. cg_aero(:,:,:,:) = 0. IF (aerosol_couple .AND. (config_inca /= "aero" & .AND. config_inca /= "aeNP ")) THEN abort_message & = 'if aerosol_couple is activated, config_inca need to be ' & // 'aero or aeNP' CALL abort_physic (modname,abort_message,1) ENDIF rnebcon0(:,:) = 0.0 clwcon0(:,:) = 0.0 rnebcon(:,:) = 0.0 clwcon(:,:) = 0.0 ! print*,'iflag_coupl,iflag_clos,iflag_wake', & iflag_coupl,iflag_clos,iflag_wake print*,'iflag_cycle_diurne', iflag_cycle_diurne ! IF (iflag_con.EQ.2.AND.iflag_cld_th.GT.-1) THEN abort_message = 'Tiedtke needs iflag_cld_th=-2 or -1' CALL abort_physic (modname,abort_message,1) ENDIF ! ! ! Initialiser les compteurs: ! itap = 0 itaprad = 0 itapcv = 0 itapwk = 0 ! C Risi: vérifier compatibilité des options isotopiques entre ! dyn3dmem et physiq #ifdef ISO write(*,*) 'physiq 1846a: ok_isotopes,ntraciso,niso=',ok_isotopes,ntraciso,niso if (.not.ok_isotopes) then CALL abort_gcm('physiq 1756','options iso incompatibles',1) endif #ifdef ISOTRAC if (.not.ok_isotrac) then CALL abort_gcm('physiq 1758','options isotrac incompatibles',1) endif #else ! #ifdef ISOTRAC if (ok_isotrac) then CALL abort_gcm('physiq 1762','options isotrac incompatibles',1) endif #endif !! #ifdef ISOTRAC ! -> on supprime opion ISOTRAC, tout passe par ok_isotrac #else ! #ifdef ISO if (ok_isotopes) then CALL abort_gcm('physiq 1772','options iso incompatibles',1) endif #endif ! #ifdef ISO #ifdef ISO ! initialisations isotopiques #ifdef ISOVERIF write(*,*) 'physiq 1366: call iso_init' write(*,*) 'ok_isotopes=',ok_isotopes #endif if (ok_isotopes) then call iso_init() endif #ifdef ISOTRAC if (ok_isotrac) then write(*,*) 'physiq 1416: call iso_traceurs_init' call iso_traceurs_init() endif #endif !write(*,*) 'gcm 265: ntraciso=',ntraciso #ifdef ISOVERIF write(*,*) 'physiq 1421: call iso_verif_init' call iso_verif_init() #endif #endif ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! Un petit travail \`a faire ici. ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! IF (iflag_pbl>1) THEN PRINT*, "Using method MELLOR&YAMADA" ENDIF ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! FH 2008/05/02 changement lie a la lecture de nbapp_rad dans ! phylmd plutot que dyn3d ! Attention : la version precedente n'etait pas tres propre. ! Il se peut qu'il faille prendre une valeur differente de nbapp_rad ! pour obtenir le meme resultat. !jyg for fh< WRITE(lunout,*) 'Pas de temps phys_tstep pdtphys ',phys_tstep,pdtphys IF (abs(phys_tstep-pdtphys)>1.e-10) THEN abort_message='pas de temps doit etre entier en seconde pour orchidee et XIOS' CALL abort_physic(modname,abort_message,1) ENDIF !>jyg IF (MOD(NINT(86400./phys_tstep),nbapp_rad).EQ.0) THEN radpas = NINT( 86400./phys_tstep)/nbapp_rad ELSE WRITE(lunout,*) 'le nombre de pas de temps physique doit etre un ', & 'multiple de nbapp_rad' WRITE(lunout,*) 'changer nbapp_rad ou alors commenter ce test ', & 'mais 1+1<>2' abort_message='nbre de pas de temps physique n est pas multiple ' & // 'de nbapp_rad' CALL abort_physic(modname,abort_message,1) ENDIF IF (nbapp_cv .EQ. 0) nbapp_cv=86400./phys_tstep IF (nbapp_wk .EQ. 0) nbapp_wk=86400./phys_tstep print *,'physiq, nbapp_cv, nbapp_wk ',nbapp_cv,nbapp_wk IF (MOD(NINT(86400./phys_tstep),nbapp_cv).EQ.0) THEN cvpas_0 = NINT( 86400./phys_tstep)/nbapp_cv cvpas = cvpas_0 print *,'physiq, cvpas ',cvpas ELSE WRITE(lunout,*) 'le nombre de pas de temps physique doit etre un ', & 'multiple de nbapp_cv' WRITE(lunout,*) 'changer nbapp_cv ou alors commenter ce test ', & 'mais 1+1<>2' abort_message='nbre de pas de temps physique n est pas multiple ' & // 'de nbapp_cv' CALL abort_physic(modname,abort_message,1) ENDIF IF (MOD(NINT(86400./phys_tstep),nbapp_wk).EQ.0) THEN wkpas = NINT( 86400./phys_tstep)/nbapp_wk ! print *,'physiq, wkpas ',wkpas ELSE WRITE(lunout,*) 'le nombre de pas de temps physique doit etre un ', & 'multiple de nbapp_wk' WRITE(lunout,*) 'changer nbapp_wk ou alors commenter ce test ', & 'mais 1+1<>2' abort_message='nbre de pas de temps physique n est pas multiple ' & // 'de nbapp_wk' CALL abort_physic(modname,abort_message,1) ENDIF ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! CALL init_iophy_new(latitude_deg,longitude_deg) !=================================================================== !IM stations CFMIP nCFMIP=npCFMIP OPEN(98,file='npCFMIP_param.data',status='old', & form='formatted',iostat=iostat) IF (iostat == 0) THEN READ(98,*,end=998) nCFMIP 998 CONTINUE CLOSE(98) CONTINUE IF(nCFMIP.GT.npCFMIP) THEN print*,'nCFMIP > npCFMIP : augmenter npCFMIP et recompiler' CALL abort_physic("physiq", "", 1) ELSE print*,'physiq npCFMIP=',npCFMIP,'nCFMIP=',nCFMIP ENDIF ! ALLOCATE(tabCFMIP(nCFMIP)) ALLOCATE(lonCFMIP(nCFMIP), latCFMIP(nCFMIP)) ALLOCATE(tabijGCM(nCFMIP)) ALLOCATE(lonGCM(nCFMIP), latGCM(nCFMIP)) ALLOCATE(iGCM(nCFMIP), jGCM(nCFMIP)) ! ! lecture des nCFMIP stations CFMIP, de leur numero ! et des coordonnees geographiques lonCFMIP, latCFMIP ! CALL read_CFMIP_point_locations(nCFMIP, tabCFMIP, & lonCFMIP, latCFMIP) ! ! identification des ! 1) coordonnees lonGCM, latGCM des points CFMIP dans la ! grille de LMDZ ! 2) indices points tabijGCM de la grille physique 1d sur ! klon points ! 3) indices iGCM, jGCM de la grille physique 2d ! CALL LMDZ_CFMIP_point_locations(nCFMIP, lonCFMIP, latCFMIP, & tabijGCM, lonGCM, latGCM, iGCM, jGCM) ! ELSE ALLOCATE(tabijGCM(0)) ALLOCATE(lonGCM(0), latGCM(0)) ALLOCATE(iGCM(0), jGCM(0)) ENDIF #ifdef CPP_IOIPSL !$OMP MASTER ! FH : if ok_sync=.true. , the time axis is written at each time step ! in the output files. Only at the end in the opposite case ok_sync_omp=.FALSE. CALL getin('ok_sync',ok_sync_omp) CALL phys_output_open(longitude_deg,latitude_deg,nCFMIP,tabijGCM, & iGCM,jGCM,lonGCM,latGCM, & jjmp1,nlevSTD,clevSTD,rlevSTD, phys_tstep,ok_veget, & type_ocean,iflag_pbl,iflag_pbl_split,ok_mensuel,ok_journe, & ok_hf,ok_instan,ok_LES,ok_ade,ok_aie, & read_climoz, phys_out_filestations, & aerosol_couple, & flag_aerosol_strat, pdtphys, paprs, pphis, & pplay, lmax_th, ptconv, ptconvth, ivap, & d_u, d_t, qx, d_qx, zmasse, ok_sync_omp) !$OMP END MASTER !$OMP BARRIER ok_sync=ok_sync_omp freq_outNMC(1) = ecrit_files(7) freq_outNMC(2) = ecrit_files(8) freq_outNMC(3) = ecrit_files(9) WRITE(lunout,*)'OK freq_outNMC(1)=',freq_outNMC(1) WRITE(lunout,*)'OK freq_outNMC(2)=',freq_outNMC(2) WRITE(lunout,*)'OK freq_outNMC(3)=',freq_outNMC(3) #ifndef CPP_XIOS CALL ini_paramLMDZ_phy(phys_tstep,nid_ctesGCM) #endif #endif ecrit_reg = ecrit_reg * un_jour ecrit_tra = ecrit_tra * un_jour !XXXPB Positionner date0 pour initialisation de ORCHIDEE date0 = jD_ref WRITE(*,*) 'physiq date0 : ',date0 ! ! CALL create_climoz(read_climoz) IF (.NOT. create_etat0_limit) CALL init_aero_fromfile(flag_aerosol) !! initialise aero from file for XIOS interpolation (unstructured_grid) IF (.NOT. create_etat0_limit) CALL init_readaerosolstrato(flag_aerosol_strat) !! initialise aero strato from file for XIOS interpolation (unstructured_grid) #ifdef CPP_COSP IF (ok_cosp) THEN ! DO k = 1, klev ! DO i = 1, klon ! phicosp(i,k) = pphi(i,k) + pphis(i) ! ENDDO ! ENDDO CALL phys_cosp(itap,phys_tstep,freq_cosp, & ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, & ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, & klon,klev,longitude_deg,latitude_deg,presnivs,overlap, & JrNt,ref_liq,ref_ice, & pctsrf(:,is_ter)+pctsrf(:,is_lic), & zu10m,zv10m,pphis, & zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, & qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, & prfl(:,1:klev),psfl(:,1:klev), & pmflxr(:,1:klev),pmflxs(:,1:klev), & mr_ozone,cldtau, cldemi) ENDIF #endif #ifdef CPP_COSP2 IF (ok_cosp) THEN ! DO k = 1, klev ! DO i = 1, klon ! phicosp(i,k) = pphi(i,k) + pphis(i) ! ENDDO ! ENDDO CALL phys_cosp2(itap,phys_tstep,freq_cosp, & ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, & ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, & klon,klev,longitude_deg,latitude_deg,presnivs,overlap, & JrNt,ref_liq,ref_ice, & pctsrf(:,is_ter)+pctsrf(:,is_lic), & zu10m,zv10m,pphis, & zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, & qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, & prfl(:,1:klev),psfl(:,1:klev), & pmflxr(:,1:klev),pmflxs(:,1:klev), & mr_ozone,cldtau, cldemi) ENDIF #endif #ifdef CPP_COSPV2 IF (ok_cosp) THEN DO k = 1, klev DO i = 1, klon phicosp(i,k) = pphi(i,k) + pphis(i) ENDDO ENDDO CALL lmdz_cosp_interface(itap,phys_tstep,freq_cosp, & ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, & ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, & klon,klev,longitude_deg,latitude_deg,presnivs,overlap, & JrNt,ref_liq,ref_ice, & pctsrf(:,is_ter)+pctsrf(:,is_lic), & zu10m,zv10m,pphis, & phicosp,paprs(:,1:klev),pplay,zxtsol,t_seri, & qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, & prfl(:,1:klev),psfl(:,1:klev), & pmflxr(:,1:klev),pmflxs(:,1:klev), & mr_ozone,cldtau, cldemi) ENDIF #endif ! ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! Nouvelle initialisation pour le rayonnement RRTM ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! CALL iniradia(klon,klev,paprs(1,1:klev+1)) ! Initialisation des champs dans phytrac* qui sont utilisés par phys_output_write* #ifdef CPP_Dust ! Quand on utilise SPLA, on force iflag_phytrac=1 CALL phytracr_spl_out_init() CALL phys_output_write_spl(itap, pdtphys, paprs, pphis, & pplay, lmax_th, aerosol_couple, & ok_ade, ok_aie, ivap, ok_sync, & ptconv, read_climoz, clevSTD, & ptconvth, d_t, qx, d_qx, d_tr_dyn, zmasse, & flag_aerosol, flag_aerosol_strat, ok_cdnc) #else ! phys_output_write écrit des variables traceurs seulement si iflag_phytrac == 1 ! donc seulement dans ce cas on doit appeler phytrac_init() IF (iflag_phytrac == 1 ) THEN CALL phytrac_init() ENDIF CALL phys_output_write(itap, pdtphys, paprs, pphis, & pplay, lmax_th, aerosol_couple, & ok_ade, ok_aie, ok_volcan, ivap, iliq, isol, ok_sync,& ptconv, read_climoz, clevSTD, & ptconvth, d_u, d_t, qx, d_qx, zmasse, & flag_aerosol, flag_aerosol_strat, ok_cdnc) #endif #ifdef CPP_XIOS IF (is_omp_master) CALL xios_update_calendar(1) #endif IF(read_climoz>=1 .AND. create_etat0_limit) CALL regr_horiz_time_climoz(read_climoz,ok_daily_climoz) CALL create_etat0_limit_unstruct CALL phyetat0 ("startphy.nc",clesphy0,tabcntr0) !jyg< IF (iflag_pbl<=1) THEN ! No TKE for Standard Physics pbl_tke(:,:,:)=0. ELSE IF (klon_glo==1) THEN pbl_tke(:,:,is_ave) = 0. DO nsrf=1,nbsrf DO k = 1,klev+1 pbl_tke(:,k,is_ave) = pbl_tke(:,k,is_ave) & +pctsrf(:,nsrf)*pbl_tke(:,k,nsrf) ENDDO ENDDO ELSE pbl_tke(:,:,is_ave) = 0. !ym missing init : maybe must be initialized in the same way that for klon_glo==1 ?? !>jyg ENDIF !IM begin print*,'physiq: clwcon rnebcon ratqs',clwcon(1,1),rnebcon(1,1) & ,ratqs(1,1) !IM end #ifdef ISO #ifdef ISOTRAC ! on initialise les cartes des bassins pour les traceurs si besoin: call initialise_bassins_boites(presnivs) #endif #endif ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! ! on remet le calendrier a zero ! IF (raz_date .eq. 1) THEN itau_phy = 0 ENDIF ! IF (ABS(phys_tstep-pdtphys).GT.0.001) THEN ! WRITE(lunout,*) 'Pas physique n est pas correct',phys_tstep, & ! pdtphys ! abort_message='Pas physique n est pas correct ' ! ! call abort_physic(modname,abort_message,1) ! phys_tstep=pdtphys ! ENDIF IF (nlon .NE. klon) THEN WRITE(lunout,*)'nlon et klon ne sont pas coherents', nlon, & klon abort_message='nlon et klon ne sont pas coherents' CALL abort_physic(modname,abort_message,1) ENDIF IF (nlev .NE. klev) THEN WRITE(lunout,*)'nlev et klev ne sont pas coherents', nlev, & klev abort_message='nlev et klev ne sont pas coherents' CALL abort_physic(modname,abort_message,1) ENDIF ! IF (phys_tstep*REAL(radpas).GT.21600..AND.iflag_cycle_diurne.GE.1) THEN WRITE(lunout,*)'Nbre d appels au rayonnement insuffisant' WRITE(lunout,*)"Au minimum 4 appels par jour si cycle diurne" abort_message='Nbre d appels au rayonnement insuffisant' CALL abort_physic(modname,abort_message,1) ENDIF WRITE(lunout,*)"Clef pour la convection, iflag_con=", iflag_con WRITE(lunout,*)"Clef pour le driver de la convection, ok_cvl=", & ok_cvl ! !KE43 ! Initialisation pour la convection de K.E. (sb): IF (iflag_con.GE.3) THEN WRITE(lunout,*)"*** Convection de Kerry Emanuel 4.3 " WRITE(lunout,*) & "On va utiliser le melange convectif des traceurs qui" WRITE(lunout,*)"est calcule dans convect4.3" WRITE(lunout,*)" !!! penser aux logical flags de phytrac" DO i = 1, klon ema_cbmf(i) = 0. ema_pcb(i) = 0. ema_pct(i) = 0. ! ema_workcbmf(i) = 0. ENDDO !IM15/11/02 rajout initialisation ibas_con,itop_con cf. SB =>BEG DO i = 1, klon ibas_con(i) = 1 itop_con(i) = 1 ENDDO !IM15/11/02 rajout initialisation ibas_con,itop_con cf. SB =>END !================================================================ !CR:04.12.07: initialisations poches froides ! Controle de ALE et ALP pour la fermeture convective (jyg) IF (iflag_wake>=1) THEN CALL ini_wake(0.,0.,it_wape_prescr,wape_prescr,fip_prescr & ,alp_bl_prescr, ale_bl_prescr) ! 11/09/06 rajout initialisation ALE et ALP du wake et PBL(YU) ! print*,'apres ini_wake iflag_cld_th=', iflag_cld_th ! ! Initialize tendencies of wake state variables (for some flag values ! they are not computed). d_deltat_wk(:,:) = 0. d_deltaq_wk(:,:) = 0. d_deltat_wk_gw(:,:) = 0. d_deltaq_wk_gw(:,:) = 0. d_deltat_vdf(:,:) = 0. d_deltaq_vdf(:,:) = 0. d_deltat_the(:,:) = 0. d_deltaq_the(:,:) = 0. d_deltat_ajs_cv(:,:) = 0. d_deltaq_ajs_cv(:,:) = 0. d_s_wk(:) = 0. d_dens_wk(:) = 0. #ifdef ISO d_deltaxt_wk(:,:,:) = 0. d_deltaxt_vdf(:,:,:) = 0. d_deltaxt_the(:,:,:) = 0. d_deltaxt_ajs_cv(:,:,:) = 0. #endif ENDIF ! do i = 1,klon ! Ale_bl(i)=0. ! Alp_bl(i)=0. ! enddo !ELSE ! ALLOCATE(tabijGCM(0)) ! ALLOCATE(lonGCM(0), latGCM(0)) ! ALLOCATE(iGCM(0), jGCM(0)) ENDIF DO i=1,klon rugoro(i) = f_rugoro * MAX(1.0e-05, zstd(i)*zsig(i)/2.0) ENDDO !34EK IF (ok_orodr) THEN ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! FH sans doute a enlever de finitivement ou, si on le ! garde, l'activer justement quand ok_orodr = false. ! ce rugoro est utilise par la couche limite et fait double emploi ! avec les param\'etrisations sp\'ecifiques de Francois Lott. ! DO i=1,klon ! rugoro(i) = MAX(1.0e-05, zstd(i)*zsig(i)/2.0) ! ENDDO ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! IF (ok_strato) THEN CALL SUGWD_strato(klon,klev,paprs,pplay) ELSE CALL SUGWD(klon,klev,paprs,pplay) ENDIF DO i=1,klon zuthe(i)=0. zvthe(i)=0. IF (zstd(i).gt.10.) THEN zuthe(i)=(1.-zgam(i))*cos(zthe(i)) zvthe(i)=(1.-zgam(i))*sin(zthe(i)) ENDIF ENDDO ENDIF ! ! lmt_pas = NINT(86400./phys_tstep * 1.0) ! tous les jours WRITE(lunout,*)'La frequence de lecture surface est de ', & lmt_pas ! capemaxcels = 't_max(X)' t2mincels = 't_min(X)' t2maxcels = 't_max(X)' tinst = 'inst(X)' tave = 'ave(X)' !IM cf. AM 081204 BEG write(lunout,*)'AVANT HIST IFLAG_CON=',iflag_con !IM cf. AM 081204 END ! !============================================================= ! Initialisation des sorties !============================================================= #ifdef CPP_XIOS ! Get "missing_val" value from XML files (from temperature variable) !$OMP MASTER CALL xios_get_field_attr("temp",default_value=missing_val_omp) !$OMP END MASTER !$OMP BARRIER missing_val=missing_val_omp #endif #ifdef CPP_XIOS ! Need to put this initialisation after phyetat0 as in the coupled model the XIOS context is only ! initialised at that moment ! Get "missing_val" value from XML files (from temperature variable) !$OMP MASTER CALL xios_get_field_attr("temp",default_value=missing_val_omp) !$OMP END MASTER !$OMP BARRIER missing_val=missing_val_omp #endif CALL printflag( tabcntr0,radpas,ok_journe, & ok_instan, ok_region ) ! ! ! ! Prescrire l'ozone dans l'atmosphere ! ! !c DO i = 1, klon !c DO k = 1, klev !c CALL o3cm (paprs(i,k)/100.,paprs(i,k+1)/100., wo(i,k),20) !c ENDDO !c ENDDO ! IF (type_trac == 'inca' .OR. type_trac == 'inco') THEN ! ModThL #ifdef INCA CALL VTe(VTphysiq) CALL VTb(VTinca) calday = REAL(days_elapsed) + jH_cur WRITE(lunout,*) 'initial time chemini', days_elapsed, calday CALL chemini( & rg, & ra, & cell_area, & latitude_deg, & longitude_deg, & presnivs, & calday, & klon, & nqtot, & nqo+nqCO2, & pdtphys, & annee_ref, & year_cur, & day_ref, & day_ini, & start_time, & itau_phy, & date0, & io_lon, & io_lat, & chemistry_couple, & init_source, & init_tauinca, & init_pizinca, & init_cginca, & init_ccminca) ! initialisation des variables depuis le restart de inca ccm(:,:,:) = init_ccminca tau_aero(:,:,:,:) = init_tauinca piz_aero(:,:,:,:) = init_pizinca cg_aero(:,:,:,:) = init_cginca ! CALL VTe(VTinca) CALL VTb(VTphysiq) #endif ENDIF IF (type_trac == 'repr') THEN #ifdef REPROBUS CALL chemini_rep( & presnivs, & pdtphys, & annee_ref, & day_ref, & day_ini, & start_time, & itau_phy, & io_lon, & io_lat) #endif ENDIF !$omp single IF (read_climoz >= 1) CALL open_climoz(ncid_climoz, press_cen_climoz, & press_edg_climoz, time_climoz, ok_daily_climoz, adjust_tropopause) !$omp end single ! !IM betaCRF pfree=70000. !Pa beta_pbl=1. beta_free=1. lon1_beta=-180. lon2_beta=+180. lat1_beta=90. lat2_beta=-90. mskocean_beta=.FALSE. !albedo SB >>> SELECT CASE(nsw) CASE(2) SFRWL(1)=0.45538747 SFRWL(2)=0.54461211 CASE(4) SFRWL(1)=0.45538747 SFRWL(2)=0.32870591 SFRWL(3)=0.18568763 SFRWL(4)=3.02191470E-02 CASE(6) SFRWL(1)=1.28432794E-03 SFRWL(2)=0.12304168 SFRWL(3)=0.33106142 SFRWL(4)=0.32870591 SFRWL(5)=0.18568763 SFRWL(6)=3.02191470E-02 END SELECT !albedo SB <<< OPEN(99,file='beta_crf.data',status='old', & form='formatted',err=9999) READ(99,*,end=9998) pfree READ(99,*,end=9998) beta_pbl READ(99,*,end=9998) beta_free READ(99,*,end=9998) lon1_beta READ(99,*,end=9998) lon2_beta READ(99,*,end=9998) lat1_beta READ(99,*,end=9998) lat2_beta READ(99,*,end=9998) mskocean_beta 9998 Continue CLOSE(99) 9999 Continue WRITE(*,*)'pfree=',pfree WRITE(*,*)'beta_pbl=',beta_pbl WRITE(*,*)'beta_free=',beta_free WRITE(*,*)'lon1_beta=',lon1_beta WRITE(*,*)'lon2_beta=',lon2_beta WRITE(*,*)'lat1_beta=',lat1_beta WRITE(*,*)'lat2_beta=',lat2_beta WRITE(*,*)'mskocean_beta=',mskocean_beta !lwoff=y : offset LW CRE for radiation code and other schemes !lwoff=y : betalwoff=1. betalwoff=0. IF (ok_lwoff) THEN betalwoff=1. ENDIF WRITE(*,*)'ok_lwoff=',ok_lwoff ! !lwoff=y to begin only sollw and sollwdown are set up to CS values sollw = sollw + betalwoff * (sollw0 - sollw) sollwdown(:)= sollwdown(:) + betalwoff *(-1.*ZFLDN0(:,1) - & sollwdown(:)) ENDIF ! ! **************** Fin de IF ( debut ) *************** ! ! ! Incrementer le compteur de la physique ! itap = itap + 1 IF (is_master .OR. prt_level > 9) THEN IF (prt_level > 5 .or. MOD(itap,5) == 0) THEN WRITE(LUNOUT,*)'Entering physics elapsed seconds since start ', current_time WRITE(LUNOUT,100)year_cur,mth_cur,day_cur,hour/3600. 100 FORMAT('Date = ',i4.4,' / ',i2.2, ' / ',i2.2,' : ',f20.17) ENDIF ENDIF ! ! ! Update fraction of the sub-surfaces (pctsrf) and ! initialize, where a new fraction has appeared, all variables depending ! on the surface fraction. ! CALL change_srf_frac(itap, phys_tstep, days_elapsed+1, & pctsrf, fevap, z0m, z0h, agesno, & falb_dir, falb_dif, ftsol, ustar, u10m, v10m, pbl_tke & #ifdef ISO ,fxtevap & #endif & ) ! Update time and other variables in Reprobus IF (type_trac == 'repr') THEN #ifdef REPROBUS CALL Init_chem_rep_xjour(jD_cur-jD_ref+day_ref) print*,'xjour equivalent rjourvrai',jD_cur-jD_ref+day_ref CALL Rtime(debut) #endif ENDIF ! Tendances bidons pour les processus qui n'affectent pas certaines ! variables. du0(:,:)=0. dv0(:,:)=0. dt0 = 0. dq0(:,:)=0. dql0(:,:)=0. dqi0(:,:)=0. #ifdef ISO dxt0(:,:,:)=0. dxtl0(:,:,:)=0. dxti0(:,:,:)=0. #endif dsig0(:) = 0. ddens0(:) = 0. wkoccur1(:)=1 ! ! Mettre a zero des variables de sortie (pour securite) ! DO i = 1, klon d_ps(i) = 0.0 ENDDO DO k = 1, klev DO i = 1, klon d_t(i,k) = 0.0 d_u(i,k) = 0.0 d_v(i,k) = 0.0 ENDDO ENDDO DO iq = 1, nqtot DO k = 1, klev DO i = 1, klon d_qx(i,k,iq) = 0.0 ENDDO ENDDO ENDDO beta_prec_fisrt(:,:)=0. beta_prec(:,:)=0. ! ! Output variables from the convective scheme should not be set to 0 ! since convection is not always called at every time step. IF (ok_bug_cv_trac) THEN da(:,:)=0. mp(:,:)=0. phi(:,:,:)=0. ! RomP >>> phi2(:,:,:)=0. epmlmMm(:,:,:)=0. eplaMm(:,:)=0. d1a(:,:)=0. dam(:,:)=0. pmflxr(:,:)=0. pmflxs(:,:)=0. ! RomP <<< ENDIF ! ! Ne pas affecter les valeurs entrees de u, v, h, et q ! DO k = 1, klev DO i = 1, klon t_seri(i,k) = t(i,k) u_seri(i,k) = u(i,k) v_seri(i,k) = v(i,k) q_seri(i,k) = qx(i,k,ivap) ql_seri(i,k) = qx(i,k,iliq) !CR: ATTENTION, on rajoute la variable glace IF (nqo.eq.2) THEN qs_seri(i,k) = 0. ELSE IF (nqo.eq.3) THEN qs_seri(i,k) = qx(i,k,isol) ENDIF ENDDO ENDDO ! C Risi: dispatcher les isotopes dans les xt_seri #ifdef ISO #ifdef ISOVERIF ! write(*,*) 'physiq 1847: qx(1,1,:)=',qx(1,1,:) write(*,*) 'physiq 1846b: ok_isotopes,ntraciso,niso=',ok_isotopes,ntraciso,niso #endif do ixt=1,ntraciso #ifdef ISOVERIF write(*,*) 'physiq tmp 1762a: ixt,iqiso_vap=',ixt,iqiso(ixt,ivap) write(*,*) 'physiq tmp 1762b: ixt,iqiso_liq=',ixt,iqiso(ixt,iliq) if (nqo.eq.3) then write(*,*) 'physiq tmp 1762c: ixt,iqiso_liq=',ixt,iqiso(ixt,iliq) endif !if (nqo.eq.3) then #endif if (ixt.gt.niso) then write(*,*) 'izone,iiso=',zone_num(iqiso(ixt,ivap)),iso_indnum(iqiso(ixt,ivap)) endif DO k = 1, klev DO i = 1, klon xt_seri(ixt,i,k) = qx(i,k,iqiso(ixt,ivap)) xtl_seri(ixt,i,k) = qx(i,k,iqiso(ixt,iliq)) if (nqo.eq.2) then xts_seri(ixt,i,k) = 0. else if (nqo.eq.3) then xts_seri(ixt,i,k) = qx(i,k,iqiso(ixt,isol)) endif enddo !DO i = 1, klon enddo ! DO k = 1, klev !write(*,*) 'physiq tmp 1897: dispatch termine pour ixt=',ixt enddo !do ixt=1,niso ! write(*,*) 'physiq tmp 1898: dispatch termine pour tous' #endif ! #ifdef ISO ! !--OB mass fixer IF (mass_fixer) THEN !--store initial water burden qql1(:)=0.0 DO k = 1, klev qql1(:)=qql1(:)+(q_seri(:,k)+ql_seri(:,k)+qs_seri(:,k))*zmasse(:,k) ENDDO #ifdef ISO #ifdef ISOVERIF write(*,*) 'physiq tmp 1913' #endif do ixt=1,ntraciso xtql1(ixt,:)=0.0 DO k = 1, klev xtql1(ixt,:)=xtql1(ixt,:)+(xt_seri(ixt,:,k)+xtl_seri(ixt,:,k)+xts_seri(ixt,:,k))*zmasse(:,k) ENDDO enddo !do ixt=1,ntraciso #endif ENDIF !--fin mass fixer tke0(:,:)=pbl_tke(:,:,is_ave) !C Risi:Nombre de traceurs de l'eau: nqo ! IF (nqtot.GE.3) THEN IF (nqtot.GE.(nqo+1)) THEN ! DO iq = 3, nqtot ! DO iq = nqo+1, nqtot ! CR: on modifie directement le code ici. ! les isotopes ne sont pas dispatchés dans tr_seri, il faut les enlever. ! on a prévu pour ça un tableau d'indice dans infotrac #ifdef ISOVERIF write(*,*) 'physiq 1971: nqtottr=',nqtottr #endif do itr=1,nqtottr iq=itr_indice(itr) !#ifdef ISOVERIF ! write(*,*) 'physiq 1973: itr,iq=',itr,iq ! write(*,*) 'qx(1,1,iq)=',qx(1,1,iq) !#endif DO k = 1, klev DO i = 1, klon tr_seri(i,k,itr) = qx(i,k,iq) ! modif C Risi ENDDO ENDDO !DO k = 1, klev !write(*,*) 'physiq 1980' enddo !do itr=1,nqtottr ELSE !IF (nqtot.GE.(nqo+1)) THEN DO k = 1, klev DO i = 1, klon tr_seri(i,k,1) = 0.0 ENDDO ENDDO ENDIF !IF (nqtot.GE.(nqo+1)) THEN ! ! Temporary solutions adressing ticket #104 and the non initialisation of tr_ancien ! LF IF (debut) THEN WRITE(lunout,*)' WARNING: tr_ancien initialised to tr_seri' ! DO iq = nqo+1, nqtot ! tr_ancien(:,:,iq-nqo)=tr_seri(:,:,iq-nqo) ! ENDDO ! modif CRisi: do itr=1,nqtottr tr_ancien(:,:,itr)=tr_seri(:,:,itr) enddo ENDIF ! DO i = 1, klon ztsol(i) = 0. ENDDO DO nsrf = 1, nbsrf DO i = 1, klon ztsol(i) = ztsol(i) + ftsol(i,nsrf)*pctsrf(i,nsrf) ENDDO ENDDO ! Initialize variables used for diagnostic purpose IF (flag_inhib_tend .ne. 0) CALL init_cmp_seri ! Diagnostiquer la tendance dynamique #ifdef ISOVERIF !write(*,*) 'physiq tmp 2010: ancien_ok=',ancien_ok if ((iso_HDO.gt.0).and.(iso_O18.gt.0)) then do i=1,klon do k=1,klev if (q_seri(i,k).gt.ridicule) then if (iso_verif_o18_aberrant_nostop( & & xt_seri(iso_HDO,i,k)/q_seri(i,k), & & xt_seri(iso_O18,i,k)/q_seri(i,k), & & 'physiq 2099 qv').eq.1) then write(*,*) 'physic 2444: i,k,q_seri(i,k)=',i,k,q_seri(i,k) write(*,*) 'xt_seri(:,i,k)=',xt_seri(:,i,k) stop endif ! if (iso_verif_o18_aberrant_nostop endif !if (q_seri(i,k).gt.errmax) then if (ql_seri(i,k).gt.ridicule) then if (iso_verif_o18_aberrant_nostop( & & xtl_seri(iso_HDO,i,k)/ql_seri(i,k), & & xtl_seri(iso_O18,i,k)/ql_seri(i,k), & & 'physiq 2099 ql').eq.1) then write(*,*) 'i,k,ql_seri(i,k)=',i,k,ql_seri(i,k) stop endif ! if (iso_verif_o18_aberrant_nostop endif !if (q_seri(i,k).gt.errmax) then if (qs_seri(i,k).gt.ridicule) then if (iso_verif_o18_aberrant_nostop( & & xts_seri(iso_HDO,i,k)/qs_seri(i,k), & & xts_seri(iso_O18,i,k)/qs_seri(i,k), & & 'physiq 2099 qs').eq.1) then write(*,*) 'i,k,qs_seri(i,k)=',i,k,qs_seri(i,k) stop endif ! if (iso_verif_o18_aberrant_nostop endif !if (q_seri(i,k).gt.errmax) then enddo !k=1,klev enddo !i=1,klon endif !if ((iso_HDO.gt.0).and.(iso_O18.gt.0)) then #endif ! IF (ancien_ok) THEN ! d_u_dyn(:,:) = (u_seri(:,:)-u_ancien(:,:))/phys_tstep d_v_dyn(:,:) = (v_seri(:,:)-v_ancien(:,:))/phys_tstep d_t_dyn(:,:) = (t_seri(:,:)-t_ancien(:,:))/phys_tstep d_q_dyn(:,:) = (q_seri(:,:)-q_ancien(:,:))/phys_tstep d_ql_dyn(:,:) = (ql_seri(:,:)-ql_ancien(:,:))/phys_tstep d_qs_dyn(:,:) = (qs_seri(:,:)-qs_ancien(:,:))/phys_tstep CALL water_int(klon,klev,q_seri,zmasse,zx_tmp_fi2d) d_q_dyn2d(:)=(zx_tmp_fi2d(:)-prw_ancien(:))/phys_tstep CALL water_int(klon,klev,ql_seri,zmasse,zx_tmp_fi2d) d_ql_dyn2d(:)=(zx_tmp_fi2d(:)-prlw_ancien(:))/phys_tstep CALL water_int(klon,klev,qs_seri,zmasse,zx_tmp_fi2d) d_qs_dyn2d(:)=(zx_tmp_fi2d(:)-prsw_ancien(:))/phys_tstep ! !! RomP >>> td dyn traceur IF (nqtot.GT.nqo) THEN ! jyg ! DO iq = nqo+1, nqtot ! jyg DO itr=1,nqtottr ! C Risi modif directe d_tr_dyn(:,:,itr)=(tr_seri(:,:,itr)-tr_ancien(:,:,itr))/phys_tstep ! jyg ENDDO ENDIF ! !! RomP <<< #ifdef ISO ! write(*,*) 'physiq tmp 2112' DO k = 1, klev DO i = 1, klon do ixt=1,ntraciso d_xt_dyn(ixt,i,k) = & & (xt_seri(ixt,i,k)-xt_ancien(ixt,i,k))/phys_tstep d_xtl_dyn(ixt,i,k) = & & (xtl_seri(ixt,i,k)-xtl_ancien(ixt,i,k))/phys_tstep d_xts_dyn(ixt,i,k) = & & (xts_seri(ixt,i,k)-xts_ancien(ixt,i,k))/phys_tstep enddo ! do ixt=1,ntraciso ENDDO ENDDO #ifdef ISOVERIF DO k = 1, klev DO i = 1, klon do ixt=1,ntraciso call iso_verif_noNaN(xt_seri(ixt,i,k),'physiq 2220') call iso_verif_noNaN(xtl_seri(ixt,i,k),'physiq 2220b') call iso_verif_noNaN(xts_seri(ixt,i,k),'physiq 2220b') call iso_verif_noNaN(d_xt_dyn(ixt,i,k),'physiq 2220c') call iso_verif_noNaN(d_xtl_dyn(ixt,i,k),'physiq 2220d') call iso_verif_noNaN(d_xts_dyn(ixt,i,k),'physiq 2220e') enddo ! do ixt=1,ntraciso enddo enddo #endif #ifdef ISOVERIF if (iso_eau.gt.0) then DO k = 1, klev DO i = 1, klon call iso_verif_egalite_choix(xt_seri(iso_eau,i,k), & & q_seri(i,k),'physiq 2033a',errmax,errmaxrel) call iso_verif_egalite_choix(xtl_seri(iso_eau,i,k), & & ql_seri(i,k),'physiq 2033al',errmax,errmaxrel) call iso_verif_egalite_choix(xts_seri(iso_eau,i,k), & & qs_seri(i,k),'physiq 2033as',errmax,errmaxrel) call iso_verif_egalite_choix(xt_ancien(iso_eau,i,k), & & q_ancien(i,k),'physiq 2033b',errmax,errmaxrel) call iso_verif_egalite_choix(d_xt_dyn(iso_eau,i,k), & & d_q_dyn(i,k),'physiq 2033c',errmax,errmaxrel) enddo enddo endif if (iso_HDO.gt.0) then DO k = 1, klev DO i = 1, klon if (q_seri(i,k).gt.3e-3) then call iso_verif_positif(deltaD(xt_seri(iso_eau,i,k) & & /q_seri(i,k))+400.0,'physiq 2045a') call iso_verif_positif(deltaD(xt_ancien(iso_eau,i,k) & & /q_ancien(i,k))+400.0,'physiq 2045b') ! call iso_verif_egalite_choix(d_xt_dyn(iso_hdo,i,k) & ! & /tnat(iso_hdo),d_q_dyn(i,k),'physiq 2045c',1e-7,0.4) endif enddo enddo endif #ifdef ISOTRAC DO k = 1, klev DO i = 1, klon call iso_verif_traceur(xt_seri(1,i,k),'physiq 2065') call iso_verif_traceur(xt_ancien(1,i,k),'physiq 2066') enddo enddo #endif #endif #endif ELSE ! ancien_OK d_u_dyn(:,:) = 0.0 d_v_dyn(:,:) = 0.0 d_t_dyn(:,:) = 0.0 d_q_dyn(:,:) = 0.0 d_ql_dyn(:,:) = 0.0 d_qs_dyn(:,:) = 0.0 d_q_dyn2d(:) = 0.0 d_ql_dyn2d(:) = 0.0 d_qs_dyn2d(:) = 0.0 #ifdef ISO ! write(*,*) 'physiq tmp 2115' ! i=496 ! k=18 ! write(*,*) 'physiq 2105: q_seri(i,k),ql_seri(i,k),qs_seri(i,k),ridicule=', & ! q_seri(i,k),ql_seri(i,k),qs_seri(i,k),ridicule DO k = 1, klev DO i = 1, klon do ixt=1,ntraciso d_xt_dyn(ixt,i,k)= 0.0 d_xtl_dyn(ixt,i,k)= 0.0 d_xts_dyn(ixt,i,k)= 0.0 enddo enddo enddo ! write(*,*) 'physiq tmp 2125' #endif ! !! RomP >>> td dyn traceur IF (nqtot.GT.nqo) THEN ! jyg ! DO iq = nqo+1, nqtot ! jyg ! d_tr_dyn(:,:,iq-nqo)= 0.0 ! jyg ! Modif C Risi: DO itr=1,nqtottr d_tr_dyn(:,:,itr)= 0.0 ENDDO ENDIF ! !! RomP <<< ancien_ok = .TRUE. ENDIF ! ! Ajouter le geopotentiel du sol: ! DO k = 1, klev DO i = 1, klon zphi(i,k) = pphi(i,k) + pphis(i) ENDDO ENDDO ! ! Verifier les temperatures ! !IM BEG IF (check) THEN amn=MIN(ftsol(1,is_ter),1000.) amx=MAX(ftsol(1,is_ter),-1000.) DO i=2, klon amn=MIN(ftsol(i,is_ter),amn) amx=MAX(ftsol(i,is_ter),amx) ENDDO ! PRINT*,' debut avant hgardfou min max ftsol',itap,amn,amx ENDIF !(check) THEN !IM END ! CALL hgardfou(t_seri,ftsol,'debutphy',abortphy) IF (abortphy==1) Print*,'ERROR ABORT hgardfou debutphy' ! !IM BEG IF (check) THEN amn=MIN(ftsol(1,is_ter),1000.) amx=MAX(ftsol(1,is_ter),-1000.) DO i=2, klon amn=MIN(ftsol(i,is_ter),amn) amx=MAX(ftsol(i,is_ter),amx) ENDDO ! PRINT*,' debut apres hgardfou min max ftsol',itap,amn,amx ENDIF !(check) THEN !IM END ! ! Mettre en action les conditions aux limites (albedo, sst, etc.). ! Prescrire l'ozone et calculer l'albedo sur l'ocean. ! ! Update ozone if day change IF (MOD(itap-1,lmt_pas) == 0) THEN IF (read_climoz <= 0) THEN ! Once per day, update ozone from Royer: IF (solarlong0<-999.) then ! Generic case with evolvoing season zzz=real(days_elapsed+1) ELSE IF (abs(solarlong0-1000.)<1.e-4) then ! Particular case with annual mean insolation zzz=real(90) ! could be revisited IF (read_climoz/=-1) THEN abort_message ='read_climoz=-1 is recommended when ' & // 'solarlong0=1000.' CALL abort_physic (modname,abort_message,1) ENDIF ELSE ! Case where the season is imposed with solarlong0 zzz=real(90) ! could be revisited ENDIF wo(:,:,1)=ozonecm(latitude_deg, paprs,read_climoz,rjour=zzz) #ifdef REPROBUS ptrop=dyn_tropopause(t_seri, ztsol, paprs, pplay, rot)/100. DO i = 1, klon Z1=t_seri(i,itroprep(i)+1) Z2=t_seri(i,itroprep(i)) fac=(Z1-Z2)/alog(pplay(i,itroprep(i)+1)/pplay(i,itroprep(i))) B=Z2-fac*alog(pplay(i,itroprep(i))) ttrop(i)= fac*alog(ptrop(i))+B ! Z1= 1.e-3 * ( pphi(i,itroprep(i)+1)+pphis(i) ) / gravit Z2= 1.e-3 * ( pphi(i,itroprep(i)) +pphis(i) ) / gravit fac=(Z1-Z2)/alog(pplay(i,itroprep(i)+1)/pplay(i,itroprep(i))) B=Z2-fac*alog(pplay(i,itroprep(i))) ztrop(i)=fac*alog(ptrop(i))+B ENDDO #endif ELSE !--- ro3i = elapsed days number since current year 1st january, 0h ro3i=days_elapsed+jh_cur-jh_1jan !--- scaling for old style files (360 records) IF(SIZE(time_climoz)==360.AND..NOT.ok_daily_climoz) ro3i=ro3i*360./year_len IF(adjust_tropopause) THEN CALL regr_pr_time_av(ncid_climoz, vars_climoz(1:read_climoz), & ro3i, 'C', press_cen_climoz, pplay, wo, paprs(:,1), & time_climoz , longitude_deg, latitude_deg, & dyn_tropopause(t_seri, ztsol, paprs, pplay, rot)) ELSE CALL regr_pr_time_av(ncid_climoz, vars_climoz(1:read_climoz), & ro3i, 'C', press_cen_climoz, pplay, wo, paprs(:,1), & time_climoz ) ENDIF ! Convert from mole fraction of ozone to column density of ozone in a ! cell, in kDU: FORALL (l = 1: read_climoz) wo(:, :, l) = wo(:, :, l) * rmo3 / rmd & * zmasse / dobson_u / 1e3 ! (By regridding ozone values for LMDZ only once a day, we ! have already neglected the variation of pressure in one ! day. So do not recompute "wo" at each time step even if ! "zmasse" changes a little.) ENDIF ENDIF ! ! Re-evaporer l'eau liquide nuageuse ! CALL reevap (klon,klev,iflag_ice_thermo,t_seri,q_seri,ql_seri,qs_seri, & & d_t_eva,d_q_eva,d_ql_eva,d_qi_eva & #ifdef ISO ,xt_seri,xtl_seri,xts_seri,d_xt_eva,d_xtl_eva,d_xti_eva & #endif & ) CALL add_phys_tend & (du0,dv0,d_t_eva,d_q_eva,d_ql_eva,d_qi_eva,paprs,& 'eva',abortphy,flag_inhib_tend,itap,0 & #ifdef ISO & ,d_xt_eva,d_xtl_eva,d_xti_eva & #endif & ) CALL prt_enerbil('eva',itap) !========================================================================= ! Calculs de l'orbite. ! Necessaires pour le rayonnement et la surface (calcul de l'albedo). ! doit donc etre plac\'e avant radlwsw et pbl_surface ! !! jyg 17 Sep 2010 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! CALL ymds2ju(year_cur, mth_eq, day_eq,0., jD_eq) day_since_equinox = (jD_cur + jH_cur) - jD_eq ! ! choix entre calcul de la longitude solaire vraie ou valeur fixee a ! solarlong0 IF (solarlong0<-999.) THEN IF (new_orbit) THEN ! calcul selon la routine utilisee pour les planetes CALL solarlong(day_since_equinox, zlongi, dist) ELSE ! calcul selon la routine utilisee pour l'AR4 CALL orbite(REAL(days_elapsed+1),zlongi,dist) ENDIF ELSE zlongi=solarlong0 ! longitude solaire vraie dist=1. ! distance au soleil / moyenne ENDIF IF (prt_level.ge.1) write(lunout,*)'Longitude solaire ',zlongi,solarlong0,dist ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! Calcul de l'ensoleillement : ! ============================ ! Pour une solarlong0=1000., on calcule un ensoleillement moyen sur ! l'annee a partir d'une formule analytique. ! Cet ensoleillement est sym\'etrique autour de l'\'equateur et ! non nul aux poles. IF (abs(solarlong0-1000.)<1.e-4) THEN CALL zenang_an(iflag_cycle_diurne.GE.1,jH_cur, & latitude_deg,longitude_deg,rmu0,fract) swradcorr(:) = 1.0 JrNt(:) = 1.0 zrmu0(:) = rmu0(:) ELSE ! recode par Olivier Boucher en sept 2015 SELECT CASE (iflag_cycle_diurne) CASE(0) ! Sans cycle diurne CALL angle(zlongi, latitude_deg, fract, rmu0) swradcorr = 1.0 JrNt = 1.0 zrmu0 = rmu0 CASE(1) ! Avec cycle diurne sans application des poids ! bit comparable a l ancienne formulation cycle_diurne=true ! on integre entre gmtime et gmtime+radpas zdtime=phys_tstep*REAL(radpas) ! pas de temps du rayonnement (s) CALL zenang(zlongi,jH_cur,0.0,zdtime, & latitude_deg,longitude_deg,rmu0,fract) zrmu0 = rmu0 swradcorr = 1.0 ! Calcul du flag jour-nuit JrNt = 0.0 WHERE (fract.GT.0.0) JrNt = 1.0 CASE(2) ! Avec cycle diurne sans application des poids ! On integre entre gmtime-pdtphys et gmtime+pdtphys*(radpas-1) ! Comme cette routine est appele a tous les pas de temps de ! la physique meme si le rayonnement n'est pas appele je ! remonte en arriere les radpas-1 pas de temps ! suivant. Petite ruse avec MOD pour prendre en compte le ! premier pas de temps de la physique pendant lequel ! itaprad=0 zdtime1=phys_tstep*REAL(-MOD(itaprad,radpas)-1) zdtime2=phys_tstep*REAL(radpas-MOD(itaprad,radpas)-1) CALL zenang(zlongi,jH_cur,zdtime1,zdtime2, & latitude_deg,longitude_deg,rmu0,fract) ! ! Calcul des poids ! zdtime1=-phys_tstep !--on corrige le rayonnement pour representer le zdtime2=0.0 !--pas de temps de la physique qui se termine CALL zenang(zlongi,jH_cur,zdtime1,zdtime2, & latitude_deg,longitude_deg,zrmu0,zfract) swradcorr = 0.0 WHERE (rmu0.GE.1.e-10 .OR. fract.GE.1.e-10) & swradcorr=zfract/fract*zrmu0/rmu0 ! Calcul du flag jour-nuit JrNt = 0.0 WHERE (zfract.GT.0.0) JrNt = 1.0 END SELECT ENDIF sza_o = ACOS (rmu0) *180./pi IF (mydebug) THEN CALL writefield_phy('u_seri',u_seri,nbp_lev) CALL writefield_phy('v_seri',v_seri,nbp_lev) CALL writefield_phy('t_seri',t_seri,nbp_lev) CALL writefield_phy('q_seri',q_seri,nbp_lev) ENDIF !cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc ! Appel au pbl_surface : Planetary Boudary Layer et Surface ! Cela implique tous les interactions des sous-surfaces et la ! partie diffusion turbulent du couche limit. ! ! Certains varibales de sorties de pbl_surface sont utiliser que pour ! ecriture des fihiers hist_XXXX.nc, ces sont : ! qsol, zq2m, s_pblh, s_lcl, ! s_capCL, s_oliqCL, s_cteiCL,s_pblT, ! s_therm, s_trmb1, s_trmb2, s_trmb3, ! zu10m, zv10m, fder, ! zxqsurf, delta_qsurf, ! rh2m, zxfluxu, zxfluxv, ! frugs, agesno, fsollw, fsolsw, ! d_ts, fevap, fluxlat, t2m, ! wfbils, wfbilo, fluxt, fluxu, fluxv, ! ! Certains ne sont pas utiliser du tout : ! dsens, devap, zxsnow, zxfluxt, zxfluxq, q2m, fluxq ! ! Calcul de l'humidite de saturation au niveau du sol IF (iflag_pbl/=0) THEN !jyg+nrlmd< !!jyg IF (prt_level .ge. 2 .and. mod(iflag_pbl_split,2) .eq. 1) THEN IF (prt_level .ge. 2 .and. mod(iflag_pbl_split,10) .ge. 1) THEN print *,'debut du splitting de la PBL, wake_s = ', wake_s(:) print *,'debut du splitting de la PBL, wake_deltat = ', wake_deltat(:,1) print *,'debut du splitting de la PBL, wake_deltaq = ', wake_deltaq(:,1) ENDIF ! !! !>jyg+nrlmd ! !-------gustiness calculation-------! !ym : Warning gustiness non inialized for iflag_gusts=2 & iflag_gusts=3 gustiness=0 !ym missing init IF (iflag_gusts==0) THEN gustiness(1:klon)=0 ELSE IF (iflag_gusts==1) THEN gustiness(1:klon)=f_gust_bl*ale_bl(1:klon)+f_gust_wk*ale_wake(1:klon) ELSE IF (iflag_gusts==2) THEN gustiness(1:klon)=f_gust_bl*ale_bl_stat(1:klon)+f_gust_wk*ale_wake(1:klon) ! ELSE IF (iflag_gusts==2) THEN ! do i = 1, klon ! gustiness(i)=f_gust_bl*ale_bl(i)+sigma_wk(i)*f_gust_wk& ! *ale_wake(i) !! need to make sigma_wk accessible here ! enddo ! ELSE IF (iflag_gusts==3) THEN ! do i = 1, klon ! gustiness(i)=f_gust_bl*alp_bl(i)+f_gust_wk*alp_wake(i) ! enddo ENDIF CALL pbl_surface( & phys_tstep, date0, itap, days_elapsed+1, & debut, lafin, & longitude_deg, latitude_deg, rugoro, zrmu0, & sollwdown, cldt, & rain_fall, snow_fall, solsw, solswfdiff, sollw, & gustiness, & t_seri, q_seri, u_seri, v_seri, & !nrlmd+jyg< wake_deltat, wake_deltaq, wake_cstar, wake_s, & !>nrlmd+jyg pplay, paprs, pctsrf, & ftsol,SFRWL,falb_dir,falb_dif,ustar,u10m,v10m,wstar, & !albedo SB <<< cdragh, cdragm, u1, v1, & beta_aridity, & !albedo SB >>> ! albsol1, albsol2, sens, evap, & albsol_dir, albsol_dif, sens, evap, & !albedo SB <<< albsol3_lic,runoff, snowhgt, qsnow, to_ice, sissnow, & zxtsol, zxfluxlat, zt2m, qsat2m, zn2mout, & d_t_vdf, d_q_vdf, d_u_vdf, d_v_vdf, d_t_diss, & !nrlmd< !jyg< d_t_vdf_w, d_q_vdf_w, & d_t_vdf_x, d_q_vdf_x, & sens_x, zxfluxlat_x, sens_w, zxfluxlat_w, & !>jyg delta_tsurf,wake_dens, & cdragh_x,cdragh_w,cdragm_x,cdragm_w, & kh,kh_x,kh_w, & !>nrlmd coefh(1:klon,1:klev,1:nbsrf+1), coefm(1:klon,1:klev,1:nbsrf+1), & slab_wfbils, & qsol, zq2m, s_pblh, s_lcl, & !jyg< s_pblh_x, s_lcl_x, s_pblh_w, s_lcl_w, & !>jyg s_capCL, s_oliqCL, s_cteiCL,s_pblT, & s_therm, s_trmb1, s_trmb2, s_trmb3, & zustar, zu10m, zv10m, fder, & zxqsurf, delta_qsurf, rh2m, zxfluxu, zxfluxv, & z0m, z0h, agesno, fsollw, fsolsw, & d_ts, fevap, fluxlat, t2m, & wfbils, wfbilo, wfevap, wfrain, wfsnow, & fluxt, fluxu, fluxv, & dsens, devap, zxsnow, & zxfluxt, zxfluxq, q2m, fluxq, pbl_tke, & !nrlmd+jyg< wake_delta_pbl_TKE, & !>nrlmd+jyg treedrg & #ifdef ISO & ,xtrain_fall, xtsnow_fall,xt_seri, & & wake_deltaxt,xtevap,fxtevap, & & d_xt_vdf,d_xt_vdf_w,d_xt_vdf_x, & & xtsol,dxtevap,zxxtsnow,zxfluxxt,fluxxt, & & h1_diag,runoff_diag,xtrunoff_diag & #endif & ) !FC #ifdef ISO ! write(*,*) 'physiq 2402: apres pbl_surface' #ifdef ISOVERIF do i=1,klon do k=1,klev do ixt=1,ntraciso call iso_verif_noNaN(d_xt_vdf(ixt,i,k),'physiq 1993a') call iso_verif_noNaN(xt_seri(ixt,i,k),'physiq 1993b') enddo !do ixt=1,ntraciso enddo enddo #endif #ifdef ISOVERIF do i=1,klon do k=1,klev #ifdef ISOTRAC call iso_verif_traceur_justmass(d_xt_vdf(1,i,k),'physiq 2443') #endif enddo enddo ! verif iso_eau !write(*,*) 'physiq tmp 2748: iso_eau=',iso_eau !write(*,*) 'use_iso=',use_iso !write(*,*) 'iso_eau.gt.0=',iso_eau.gt.0 !write(*,*) 'd_xt_vdf(iso_eau,1,1),d_q_vdf(1,1)=',d_xt_vdf(iso_eau,1,1),d_q_vdf(1,1) !write(*,*) 'bidouille_anti_divergence=',bidouille_anti_divergence if (iso_eau.gt.0) then ! write(*,*) 'physiq 2665: d_q_vdf,d_xt_vdf(iso_eau,554,19)=',d_q_vdf(554,19),d_xt_vdf(iso_eau,554,19) ! write(*,*) 'd_q_vdf,d_xt_vdf(iso_eau,2,1)=',d_q_vdf(2,1),d_xt_vdf(iso_eau,2,1) do i=1,klon ! write(*,*) 'physiq 2667: i,k=',i,k ! write(*,*) 'd_q_vdf,d_xt_vdf(iso_eau,554,19)=',d_q_vdf(554,19),d_xt_vdf(iso_eau,554,19) ! write(*,*) 'd_q_vdf,d_xt_vdf(iso_eau,2,1)=',d_q_vdf(2,1),d_xt_vdf(iso_eau,2,1) do k=1,klev ! write(*,*) 'physiq 2670: i,k=',i,k ! write(*,*) 'd_q_vdf,d_xt_vdf(iso_eau,554,19)=',d_q_vdf(554,19),d_xt_vdf(iso_eau,554,19) ! write(*,*) 'd_q_vdf,d_xt_vdf(iso_eau,2,1)=',d_q_vdf(2,1),d_xt_vdf(iso_eau,2,1) ! write(*,*) 'd_q_vdf,d_xt_vdf(iso_eau,i,k)=',d_q_vdf(i,k),d_xt_vdf(iso_eau,i,k) call iso_verif_egalite_choix( & & d_xt_vdf(iso_eau,i,k),d_q_vdf(i,k), & & 'physiq 1984',errmax,errmaxrel) call iso_verif_egalite_choix( & & xt_seri(iso_eau,i,k),q_seri(i,k), & & 'physiq 1985',errmax,errmaxrel) do nsrf=1,nbsrf call iso_verif_egalite_choix(fluxxt(iso_eau,i,k,nsrf), & & fluxq(i,k,nsrf),'physiq 1991',errmax,errmaxrel) enddo !do nsrf=1,nbsrf enddo !k=1,klev enddo !i=1,klon endif !if (iso_eau.gt.0) then if ((iso_HDO.gt.0).and.(iso_O18.gt.0)) then do i=1,klon do k=1,klev if (q_seri(i,k).gt.ridicule) then if (iso_verif_o18_aberrant_nostop( & & xt_seri(iso_HDO,i,k)/q_seri(i,k), & & xt_seri(iso_O18,i,k)/q_seri(i,k), & & 'physiq 4177, apres pbl_surface').eq.1) then write(*,*) 'i,k,q_seri(i,k)=',i,k,q_seri(i,k) stop endif ! if (iso_verif_o18_aberrant_nostop endif !if (q_seri(i,k).gt.errmax) then enddo !k=1,klev enddo !i=1,klon endif !if ((iso_HDO.gt.0).and.(iso_O18.gt.0)) then !write(*,*) 'physiq tmp 2689' #endif !#ifdef ISOVERIF #endif !#ifdef ISO ! ! Add turbulent diffusion tendency to the wake difference variables !!jyg IF (mod(iflag_pbl_split,2) .NE. 0) THEN IF (mod(iflag_pbl_split,10) .NE. 0) THEN !jyg< d_deltat_vdf(:,:) = d_t_vdf_w(:,:)-d_t_vdf_x(:,:) d_deltaq_vdf(:,:) = d_q_vdf_w(:,:)-d_q_vdf_x(:,:) CALL add_wake_tend & (d_deltat_vdf, d_deltaq_vdf, dsig0, ddens0, ddens0, wkoccur1, 'vdf', abortphy & #ifdef ISO ,d_deltaxt_vdf & #endif ) ELSE d_deltat_vdf(:,:) = 0. d_deltaq_vdf(:,:) = 0. !>jyg #ifdef ISO d_deltaxt_vdf(:,:,:) = 0. #endif ENDIF !--------------------------------------------------------------------- ! ajout des tendances de la diffusion turbulente IF (klon_glo==1) THEN CALL add_pbl_tend & (d_u_vdf,d_v_vdf,d_t_vdf+d_t_diss,d_q_vdf,dql0,dqi0,paprs,& 'vdf',abortphy,flag_inhib_tend,itap & #ifdef ISO & ,d_xt_vdf,dxtl0,dxti0 & #endif & ) ELSE CALL add_phys_tend & (d_u_vdf,d_v_vdf,d_t_vdf+d_t_diss,d_q_vdf,dql0,dqi0,paprs,& 'vdf',abortphy,flag_inhib_tend,itap,0 & #ifdef ISO & ,d_xt_vdf,dxtl0,dxti0 & #endif & ) ENDIF #ifdef ISOVERIF write(*,*) 'physiq tmp 2736' #endif CALL prt_enerbil('vdf',itap) !-------------------------------------------------------------------- IF (mydebug) THEN CALL writefield_phy('u_seri',u_seri,nbp_lev) CALL writefield_phy('v_seri',v_seri,nbp_lev) CALL writefield_phy('t_seri',t_seri,nbp_lev) CALL writefield_phy('q_seri',q_seri,nbp_lev) ENDIF !albedo SB >>> albsol1=0. albsol2=0. falb1=0. falb2=0. SELECT CASE(nsw) CASE(2) albsol1=albsol_dir(:,1) albsol2=albsol_dir(:,2) falb1=falb_dir(:,1,:) falb2=falb_dir(:,2,:) CASE(4) albsol1=albsol_dir(:,1) albsol2=albsol_dir(:,2)*SFRWL(2)+albsol_dir(:,3)*SFRWL(3) & +albsol_dir(:,4)*SFRWL(4) albsol2=albsol2/(SFRWL(2)+SFRWL(3)+SFRWL(4)) falb1=falb_dir(:,1,:) falb2=falb_dir(:,2,:)*SFRWL(2)+falb_dir(:,3,:)*SFRWL(3) & +falb_dir(:,4,:)*SFRWL(4) falb2=falb2/(SFRWL(2)+SFRWL(3)+SFRWL(4)) CASE(6) albsol1=albsol_dir(:,1)*SFRWL(1)+albsol_dir(:,2)*SFRWL(2) & +albsol_dir(:,3)*SFRWL(3) albsol1=albsol1/(SFRWL(1)+SFRWL(2)+SFRWL(3)) albsol2=albsol_dir(:,4)*SFRWL(4)+albsol_dir(:,5)*SFRWL(5) & +albsol_dir(:,6)*SFRWL(6) albsol2=albsol2/(SFRWL(4)+SFRWL(5)+SFRWL(6)) falb1=falb_dir(:,1,:)*SFRWL(1)+falb_dir(:,2,:)*SFRWL(2) & +falb_dir(:,3,:)*SFRWL(3) falb1=falb1/(SFRWL(1)+SFRWL(2)+SFRWL(3)) falb2=falb_dir(:,4,:)*SFRWL(4)+falb_dir(:,5,:)*SFRWL(5) & +falb_dir(:,6,:)*SFRWL(6) falb2=falb2/(SFRWL(4)+SFRWL(5)+SFRWL(6)) END SELECt !albedo SB <<< CALL evappot(klon,nbsrf,ftsol,pplay(:,1),cdragh, & t_seri(:,1),q_seri(:,1),u_seri(:,1),v_seri(:,1),evap_pot) ENDIF ! =================================================================== c ! Calcul de Qsat DO k = 1, klev DO i = 1, klon zx_t = t_seri(i,k) IF (thermcep) THEN zdelta = MAX(0.,SIGN(1.,rtt-zx_t)) zx_qs = r2es * FOEEW(zx_t,zdelta)/pplay(i,k) zx_qs = MIN(0.5,zx_qs) zcor = 1./(1.-retv*zx_qs) zx_qs = zx_qs*zcor ELSE !! IF (zx_t.LT.t_coup) THEN !jyg IF (zx_t.LT.rtt) THEN !jyg zx_qs = qsats(zx_t)/pplay(i,k) ELSE zx_qs = qsatl(zx_t)/pplay(i,k) ENDIF ENDIF zqsat(i,k)=zx_qs ENDDO ENDDO IF (prt_level.ge.1) THEN write(lunout,*) 'L qsat (g/kg) avant clouds_gno' write(lunout,'(i4,f15.4)') (k,1000.*zqsat(igout,k),k=1,klev) ENDIF ! ! Appeler la convection (au choix) ! DO k = 1, klev DO i = 1, klon conv_q(i,k) = d_q_dyn(i,k) & + d_q_vdf(i,k)/phys_tstep conv_t(i,k) = d_t_dyn(i,k) & + d_t_vdf(i,k)/phys_tstep ENDDO ENDDO IF (check) THEN za = qcheck(klon,klev,paprs,q_seri,ql_seri,cell_area) WRITE(lunout,*) "avantcon=", za ENDIF zx_ajustq = .FALSE. IF (iflag_con.EQ.2) zx_ajustq=.TRUE. IF (zx_ajustq) THEN DO i = 1, klon z_avant(i) = 0.0 ENDDO DO k = 1, klev DO i = 1, klon z_avant(i) = z_avant(i) + (q_seri(i,k)+ql_seri(i,k)) & *(paprs(i,k)-paprs(i,k+1))/RG ENDDO ENDDO ENDIF ! Calcule de vitesse verticale a partir de flux de masse verticale DO k = 1, klev DO i = 1, klon omega(i,k) = RG*flxmass_w(i,k) / cell_area(i) ENDDO ENDDO IF (prt_level.ge.1) write(lunout,*) 'omega(igout, :) = ', & omega(igout, :) ! ! Appel de la convection tous les "cvpas" ! !!jyg IF (MOD(itapcv,cvpas).EQ.0) THEN !! print *,' physiq : itapcv, cvpas, itap-1, cvpas_0 ', & !! itapcv, cvpas, itap-1, cvpas_0 IF (MOD(itapcv,cvpas).EQ.0 .OR. MOD(itap-1,cvpas_0).EQ.0) THEN ! ! Mettre a zero des variables de sortie (pour securite) ! pmflxr(:,:) = 0. pmflxs(:,:) = 0. wdtrainA(:,:) = 0. wdtrainS(:,:) = 0. wdtrainM(:,:) = 0. upwd(:,:) = 0. dnwd(:,:) = 0. ep(:,:) = 0. da(:,:)=0. mp(:,:)=0. wght_cvfd(:,:)=0. phi(:,:,:)=0. phi2(:,:,:)=0. epmlmMm(:,:,:)=0. eplaMm(:,:)=0. d1a(:,:)=0. dam(:,:)=0. elij(:,:,:)=0. ev(:,:)=0. qtaa(:,:)=0. clw(:,:)=0. sij(:,:,:)=0. #ifdef ISO xtclw(:,:,:)=0. xtev(:,:,:)=0. xtwdtrainA(:,:,:) = 0. #endif ! IF (iflag_con.EQ.1) THEN abort_message ='reactiver le call conlmd dans physiq.F' CALL abort_physic (modname,abort_message,1) ! CALL conlmd (phys_tstep, paprs, pplay, t_seri, q_seri, conv_q, ! . d_t_con, d_q_con, ! . rain_con, snow_con, ibas_con, itop_con) ELSE IF (iflag_con.EQ.2) THEN #ifdef ISO CALL abort_gcm('physiq 2770','isos pas prevus ici',1) #endif CALL conflx(phys_tstep, paprs, pplay, t_seri, q_seri, & conv_t, conv_q, -evap, omega, & d_t_con, d_q_con, rain_con, snow_con, & pmfu, pmfd, pen_u, pde_u, pen_d, pde_d, & kcbot, kctop, kdtop, pmflxr, pmflxs) d_u_con = 0. d_v_con = 0. WHERE (rain_con < 0.) rain_con = 0. WHERE (snow_con < 0.) snow_con = 0. DO i = 1, klon ibas_con(i) = klev+1 - kcbot(i) itop_con(i) = klev+1 - kctop(i) ENDDO ELSE IF (iflag_con.GE.3) THEN ! nb of tracers for the KE convection: ! MAF la partie traceurs est faite dans phytrac ! on met ntra=1 pour limiter les appels mais on peut ! supprimer les calculs / ftra. #ifdef ISOVERIF do k = 1, klev do i = 1, klon call iso_verif_positif(q_seri(i,k),'physic 2929') enddo enddo #endif #ifdef ISO #ifdef ISOVERIF write(*,*) 'physiq 2877' call iso_verif_noNaN_vect2D( & & wake_deltaxt, & & 'physiq 2704c, wake_deltaxt',ntraciso,klon,klev) do k = 1, klev do i = 1, klon do ixt=1,ntraciso call iso_verif_noNaN(xt_seri(ixt,i,k),'physiq 2757') enddo ! do ixt=1,ntraciso enddo !do i = 1, klon enddo !do k = 1, klev if (iso_eau.gt.0) then call iso_verif_egalite_vect2D( & & xt_seri,q_seri, & & 'physiq 2704a, avant calcul undi',ntraciso,klon,klev) call iso_verif_egalite_vect2D( & & wake_deltaxt,wake_deltaq, & & 'physiq 2704b, wake_deltaq',ntraciso,klon,klev) endif if (iso_HDO.gt.0) then call iso_verif_aberrant_enc_vect2D( & & xt_seri,q_seri, & & 'physiq 2709, avant calcul undi',ntraciso,klon,klev) endif if ((iso_HDO.gt.0).and.(iso_O18.gt.0)) then do k = 1, klev do i = 1, klon if (q_seri(i,k).gt.ridicule) then if (iso_verif_o18_aberrant_nostop( & & xt_seri(iso_HDO,i,k)/q_seri(i,k), & & xt_seri(iso_O18,i,k)/q_seri(i,k), & & 'physiq 2947, avant calcul undi').eq.1) then write(*,*) 'physic 3315: i,k,q_seri(i,k)=',i,k,q_seri(i,k) stop endif ! if (iso_verif_o18_aberrant_nostop endif !if (q_seri(i,k).gt.errmax) then enddo !do i = 1, klon enddo !do k = 1, klev endif !if ((iso_HDO.gt.0).and.(iso_O18.gt.0)) then #endif #endif ntra = 1 !======================================================================= !ajout pour la parametrisation des poches froides: calcul de !t_w et t_x: si pas de poches froides, t_w=t_x=t_seri IF (iflag_wake>=1) THEN DO k=1,klev DO i=1,klon t_w(i,k) = t_seri(i,k) + (1-wake_s(i))*wake_deltat(i,k) q_w(i,k) = q_seri(i,k) + (1-wake_s(i))*wake_deltaq(i,k) t_x(i,k) = t_seri(i,k) - wake_s(i)*wake_deltat(i,k) q_x(i,k) = q_seri(i,k) - wake_s(i)*wake_deltaq(i,k) #ifdef ISO do ixt=1,ntraciso xt_w(ixt,i,k) = xt_seri(ixt,i,k) + (1-wake_s(i))*wake_deltaxt(ixt,i,k) xt_x(ixt,i,k) = xt_seri(ixt,i,k) - wake_s(i)*wake_deltaxt(ixt,i,k) enddo #ifdef ISOVERIF if (iso_eau.gt.0) then call iso_verif_egalite(wake_deltaq(i,k),wake_deltaxt(iso_eau,i,k),'physiq 3337') call iso_verif_egalite(q_w(i,k),xt_w(iso_eau,i,k),'physiq 3338') endif #endif #endif ENDDO ENDDO ELSE !IF (iflag_wake>=1) THEN t_w(:,:) = t_seri(:,:) q_w(:,:) = q_seri(:,:) t_x(:,:) = t_seri(:,:) q_x(:,:) = q_seri(:,:) #ifdef ISO do ixt=1,ntraciso xt_w(ixt,:,:) = xt_seri(ixt,:,:) xt_x(ixt,:,:) = xt_seri(ixt,:,:) enddo #endif ENDIF !IF (iflag_wake>=1) THEN #ifdef ISOVERIF if (iso_eau.gt.0) then DO k=1,klev DO i=1,klon call iso_verif_egalite(q_w(i,k),xt_w(iso_eau,i,k),'physiq 3358') enddo enddo endif ! if (iso_eau.gt.0) then #endif ! !jyg< ! Perform dry adiabatic adjustment on wake profile ! The corresponding tendencies are added to the convective tendencies ! after the call to the convective scheme. IF (iflag_wake>=1) then IF (iflag_adjwk >= 1) THEN limbas(:) = 1 CALL ajsec(paprs, pplay, t_w, q_w, limbas, & d_t_adjwk, d_q_adjwk & #ifdef ISO & ,xt_w,d_xt_adjwk & #endif & ) ! DO k=1,klev DO i=1,klon IF (wake_s(i) .GT. 1.e-3) THEN t_w(i,k) = t_w(i,k) + d_t_adjwk(i,k) q_w(i,k) = q_w(i,k) + d_q_adjwk(i,k) d_deltat_ajs_cv(i,k) = d_t_adjwk(i,k) d_deltaq_ajs_cv(i,k) = d_q_adjwk(i,k) #ifdef ISO do ixt=1,ntraciso xt_w(ixt,i,k) = xt_w(ixt,i,k) + d_xt_adjwk(ixt,i,k) d_deltaxt_ajs_cv(ixt,i,k) = d_xt_adjwk(ixt,i,k) enddo #endif ELSE d_deltat_ajs_cv(i,k) = 0. d_deltaq_ajs_cv(i,k) = 0. #ifdef ISO do ixt=1,ntraciso d_deltaxt_ajs_cv(ixt,i,k) = 0. enddo #endif ENDIF ENDDO ENDDO IF (iflag_adjwk == 2) THEN CALL add_wake_tend & (d_deltat_ajs_cv, d_deltaq_ajs_cv, dsig0, ddens0, ddens0, wkoccur1, 'ajs_cv', abortphy & #ifdef ISO ,d_deltaxt_ajs_cv & #endif ) ENDIF ! (iflag_adjwk == 2) ENDIF ! (iflag_adjwk >= 1) ENDIF ! (iflag_wake>=1) !>jyg ! !! print *,'physiq. q_w(1,k), q_x(1,k) ', & !! (k, q_w(1,k), q_x(1,k),k=1,25) !jyg< CALL alpale( debut, itap, phys_tstep, paprs, omega, t_seri, & alp_offset, it_wape_prescr, wape_prescr, fip_prescr, & ale_bl_prescr, alp_bl_prescr, & wake_pe, wake_fip, & Ale_bl, Ale_bl_trig, Alp_bl, & Ale, Alp , Ale_wake, Alp_wake) !>jyg ! ! sb, oct02: ! Schema de convection modularise et vectorise: ! (driver commun aux versions 3 et 4) ! IF (ok_cvl) THEN ! new driver for convectL ! #ifdef ISO #ifdef ISOVERIF write(*,*) 'physic 2553: avant appel concvl' do k = 1, klev do i = 1, klon do ixt=1,ntraciso call iso_verif_noNaN(xt_seri(ixt,i,k),'physiq 2925a') call iso_verif_noNaN(xt_x(ixt,i,k),'physiq 2925b') enddo ! do ixt=1,ntraciso call iso_verif_positif(q_seri(i,k),'physic 3133a') if (iso_eau.gt.0) then call iso_verif_egalite_choix( & & xt_seri(iso_eau,i,k),q_seri(i,k), & & 'physic 2559a',errmax,errmaxrel) call iso_verif_egalite_choix( & & xt_x(iso_eau,i,k),q_x(i,k), & & 'physic 2559b',errmax,errmaxrel) call iso_verif_egalite_choix( & & xt_w(iso_eau,i,k),q_w(i,k), & & 'physic 2559c',errmax,errmaxrel) endif !if (iso_eau.gt.0) then if (iso_HDO.gt.0) then if (q_seri(i,k).gt.ridicule) then call iso_verif_aberrant_encadre( & & xt_seri(iso_hdo,i,k)/q_seri(i,k), & & 'physic 2657a') endif !if (q_seri(i,k).gt.ridicule) then if (q_x(i,k).gt.ridicule) then call iso_verif_aberrant_encadre( & & xt_x(iso_hdo,i,k)/q_x(i,k), & & 'physic 2657b') endif !if (q_x(i,k).gt.ridicule) then if (q_w(i,k).gt.ridicule) then call iso_verif_aberrant_encadre( & & xt_w(iso_hdo,i,k)/q_w(i,k), & & 'physic 2657b') endif !if (q_x(i,k).gt.ridicule) then endif !if (iso_HDO.gt.0) then if ((iso_HDO.gt.0).and.(iso_O18.gt.0)) then if (q_seri(i,k).gt.ridicule) then call iso_verif_O18_aberrant( & & xt_seri(iso_HDO,i,k)/q_seri(i,k), & & xt_seri(iso_O18,i,k)/q_seri(i,k), & & 'physiq 3285') endif ! if (q_seri(i,k).gt.ridicule) then endif ! if ((iso_HDO.gt.0).and.(iso_O18.gt.0)) then if ((iso_O17.gt.0).and.(iso_O18.gt.0)) then if ((q_seri(i,k).gt.ridicule).and.(l.lt.nlevmaxO17)) then call iso_verif_aberrant_o17(xt_seri(iso_o17,i,k) & & /q_seri(i,k),xt_seri(iso_o18,i,k) & & /q_seri(i,k),'physiq 2781: avat clmain') endif !if (q_seri(i,k).gt.ridicule) then endif ! if ((iso_O17.gt.0).and.(iso_O18.gt.0)) then #ifdef ISOTRAC call iso_verif_traceur(xt_seri(1,i,k),'physiq 2975a') call iso_verif_traceur(xt_x(1,i,k),'physiq 2975b') call iso_verif_traceur(xt_w(1,i,k),'physiq 2975b') if (iso_verif_tracpos_choix_nostop(xt_seri(1,i,k), & & 'physiq 3060, avantconcvl',1e-5) & & .eq.1) then write(*,*) 'i,k=',i,k stop endif !if (iso_verif_tracpos_choix_nostop(xt_seri(1,i,k), if (option_tmin.eq.1) then call iso_verif_trac17_q_deltaD(xt_seri(1,i,k), & & 'physiq 1456, avant concvl') endif #endif enddo !do k=1,nlev enddo !do i=1,klon #endif !ISOVERIF if ((bidouille_anti_divergence).and. & & (iso_eau.gt.0)) then do k=1,klev do i=1,klon xt_seri(iso_eau,i,k)= q_seri(i,k) xt_x(iso_eau,i,k)= q_x(i,k) xt_w(iso_eau,i,k)= q_w(i,k) enddo !do i=1,klon enddo !do k=1,klev endif !if ((bidouille_anti_divergence).and. & #endif !jyg< ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! Calculate the upmost level of deep convection loops: k_upper_cv ! (near 22 km) k_upper_cv = klev !izero = klon/2+1/klon !DO k = klev,1,-1 ! IF (pphi(izero,k) > 22.e4) k_upper_cv = k !ENDDO ! FH : nouveau calcul base sur un profil global sans quoi ! le modele etait sensible au decoupage de domaines DO k = klev,1,-1 IF (-7*log(presnivs(k)/presnivs(1)) > 25.) k_upper_cv = k ENDDO IF (prt_level .ge. 5) THEN Print *, 'upmost level of deep convection loops: k_upper_cv = ', & k_upper_cv ENDIF ! !>jyg IF (type_trac == 'repr') THEN nbtr_tmp=ntra ELSE nbtr_tmp=nbtr ENDIF !jyg iflag_con est dans clesphys !c CALL concvl (iflag_con,iflag_clos, CALL concvl (iflag_clos, & phys_tstep, paprs, pplay, k_upper_cv, t_x,q_x, & t_w,q_w,wake_s, & u_seri,v_seri,tr_seri,nbtr_tmp, & ALE,ALP, & sig1,w01, & d_t_con,d_q_con,d_u_con,d_v_con,d_tr, & rain_con, snow_con, ibas_con, itop_con, sigd, & ema_cbmf,plcl,plfc,wbeff,convoccur,upwd,dnwd,dnwd0, & Ma,mipsh,Vprecip,cape,cin,tvp,Tconv,iflagctrl, & pbase,bbase,dtvpdt1,dtvpdq1,dplcldt,dplcldr,qcondc,wd, & ! RomP >>> !! . pmflxr,pmflxs,da,phi,mp, !! . ftd,fqd,lalim_conv,wght_th) pmflxr,pmflxs,da,phi,mp,phi2,d1a,dam,sij,qtaa,clw,elij, & ftd,fqd,lalim_conv,wght_th, & ev, ep,epmlmMm,eplaMm, & wdtrainA, wdtrainS, wdtrainM,wght_cvfd,qtc_cv,sigt_cv, & tau_cld_cv,coefw_cld_cv,epmax_diag & #ifdef ISO & ,xt_x,xt_w,d_xt_con,xtrain_con,xtsnow_con & & ,xtVprecip,xtVprecipi & & ,xtclw,fxtd,xtev,xtwdtrainA & #ifdef DIAGISO & , qlp,xtlp,qvp,xtvp & ! juste diagnostique & , fq_detrainement,fq_ddft,fq_fluxmasse,fq_evapprecip & & , fxt_detrainement,fxt_ddft,fxt_fluxmasse,fxt_evapprecip & & , f_detrainement,q_detrainement,xt_detrainement & #endif #endif & ) ! RomP <<< #ifdef ISO #ifdef ISOVERIF ! write(*,*) 'q_detrainement(1,:)=',q_detrainement(1,:) call iso_verif_noNaN_vect2D(d_xt_con, & & 'physiq 3203a apres conv',ntraciso,klon,klev) call iso_verif_noNaN_vect2D(xt_seri, & & 'physiq 3203b apres conv',ntraciso,klon,klev) if (iso_HDO.gt.0) then call iso_verif_aberrant_enc_vect2D( & & xt_seri,q_seri, & & 'physiq 3619a',ntraciso,klon,klev) endif if ((iso_HDO.gt.0).and.(iso_O18.gt.0)) then call iso_verif_O18_aberrant_enc_vect2D( & & xt_seri,q_seri, & & 'physiq 3619b',ntraciso,klon,klev) endif #endif #ifdef ISOVERIF #ifdef ISOTRAC call iso_verif_trac_masse_vect(d_xt_con,klon,klev, & & 'physiq 3003 apres tend concvl', & & errmax,errmaxrel) call iso_verif_traceur_vect(xt_seri,klon,klev, & & 'physiq 3005 apres tend concvl') #endif #endif #endif !IM begin ! print*,'physiq: cin pbase dnwd0 ftd fqd ',cin(1),pbase(1), ! .dnwd0(1,1),ftd(1,1),fqd(1,1) !IM end !IM cf. FH clwcon0=qcondc pmfu(:,:)=upwd(:,:)+dnwd(:,:) ! !jyg< ! If convective tendencies are too large, then call convection ! every time step cvpas = cvpas_0 DO k=1,k_upper_cv DO i=1,klon IF (d_t_con(i,k) > 6.721 .AND. d_t_con(i,k) < 6.722 .AND.& d_q_con(i,k) > -.0002171 .AND. d_q_con(i,k) < -.0002170) THEN dtcon_multistep_max = 3. dqcon_multistep_max = 0.02 ENDIF ENDDO ENDDO ! DO k=1,k_upper_cv DO i=1,klon !! IF (abs(d_t_con(i,k)) > 0.24 .OR. & !! abs(d_q_con(i,k)) > 2.e-2) THEN IF (abs(d_t_con(i,k)) > dtcon_multistep_max .OR. & abs(d_q_con(i,k)) > dqcon_multistep_max) THEN cvpas = 1 !! print *,'physiq1, i,k,d_t_con(i,k),d_q_con(i,k) ', & !! i,k,d_t_con(i,k),d_q_con(i,k) ENDIF ENDDO ENDDO !!! Ligne a ne surtout pas remettre sans avoir murement reflechi (jyg) !!! call bcast(cvpas) !!! ------------------------------------------------------------ !>jyg ! DO i = 1, klon IF (iflagctrl(i).le.1) itau_con(i)=itau_con(i)+cvpas ENDDO ! !jyg< ! Add the tendency due to the dry adjustment of the wake profile IF (iflag_wake>=1) THEN IF (iflag_adjwk == 2) THEN DO k=1,klev DO i=1,klon ftd(i,k) = ftd(i,k) + wake_s(i)*d_t_adjwk(i,k)/phys_tstep fqd(i,k) = fqd(i,k) + wake_s(i)*d_q_adjwk(i,k)/phys_tstep d_t_con(i,k) = d_t_con(i,k) + wake_s(i)*d_t_adjwk(i,k) d_q_con(i,k) = d_q_con(i,k) + wake_s(i)*d_q_adjwk(i,k) #ifdef ISO do ixt=1,ntraciso fxtd(ixt,i,k) = fxtd(ixt,i,k) + wake_s(i)*d_xt_adjwk(ixt,i,k)/phys_tstep d_xt_con(ixt,i,k) = d_xt_con(ixt,i,k) + wake_s(i)*d_xt_adjwk(ixt,i,k) enddo #endif ENDDO ENDDO ENDIF ! (iflag_adjwk = 2) ENDIF ! (iflag_wake>=1) !>jyg ! ELSE ! ok_cvl ! MAF conema3 ne contient pas les traceurs CALL conema3 (phys_tstep, & paprs,pplay,t_seri,q_seri, & u_seri,v_seri,tr_seri,ntra, & sig1,w01, & d_t_con,d_q_con,d_u_con,d_v_con,d_tr, & rain_con, snow_con, ibas_con, itop_con, & upwd,dnwd,dnwd0,bas,top, & Ma,cape,tvp,rflag, & pbase & ,bbase,dtvpdt1,dtvpdq1,dplcldt,dplcldr & ,clwcon0) ENDIF ! ok_cvl ! ! Correction precip rain_con = rain_con * cvl_corr snow_con = snow_con * cvl_corr #ifdef ISO xtrain_con = xtrain_con * cvl_corr xtsnow_con = xtsnow_con * cvl_corr #endif ! IF (.NOT. ok_gust) THEN do i = 1, klon wd(i)=0.0 enddo ENDIF ! =================================================================== c ! Calcul des proprietes des nuages convectifs ! ! calcul des proprietes des nuages convectifs clwcon0(:,:)=fact_cldcon*clwcon0(:,:) IF (iflag_cld_cv == 0) THEN CALL clouds_gno & (klon,klev,q_seri,zqsat,clwcon0,ptconv,ratqsc,rnebcon0) ELSE CALL clouds_bigauss & (klon,klev,q_seri,zqsat,qtc_cv,sigt_cv,ptconv,ratqsc,rnebcon0) ENDIF ! =================================================================== c DO i = 1, klon itop_con(i) = min(max(itop_con(i),1),klev) ibas_con(i) = min(max(ibas_con(i),1),itop_con(i)) ENDDO DO i = 1, klon ! C Risi modif: pour éviter pb de dépassement d'indice dans les cas ! où i n'est pas un point convectif et donc ibas_con(i)=0 ! c'est un pb indépendant des isotopes if (ibas_con(i).gt.0) then ema_pcb(i) = paprs(i,ibas_con(i)) else ! if (ibas_con(i).gt.0) then ema_pcb(i) = 0.0 endif ! if (ibas_con(i).gt.0) then ENDDO DO i = 1, klon ! L'idicage de itop_con peut cacher un pb potentiel ! FH sous la dictee de JYG, CR ema_pct(i) = paprs(i,itop_con(i)+1) IF (itop_con(i).gt.klev-3) THEN IF (prt_level >= 9) THEN write(lunout,*)'La convection monte trop haut ' write(lunout,*)'itop_con(,',i,',)=',itop_con(i) ENDIF ENDIF ENDDO ELSE IF (iflag_con.eq.0) THEN write(lunout,*) 'On n appelle pas la convection' clwcon0=0. rnebcon0=0. d_t_con=0. d_q_con=0. d_u_con=0. d_v_con=0. rain_con=0. snow_con=0. bas=1 top=1 #ifdef ISO d_xt_con=0. xtrain_con=0. xtsnow_con=0. #endif ELSE WRITE(lunout,*) "iflag_con non-prevu", iflag_con CALL abort_physic("physiq", "", 1) ENDIF ! CALL homogene(paprs, q_seri, d_q_con, u_seri,v_seri, ! . d_u_con, d_v_con) !jyg Reinitialize proba_notrig and itapcv when convection has been called proba_notrig(:) = 1. itapcv = 0 ENDIF ! (MOD(itapcv,cvpas).EQ.0 .OR. MOD(itapcv,cvpas_0).EQ.0) ! itapcv = itapcv+1 ! ! Compter les steps ou cvpas=1 IF (cvpas == 1) THEN Ncvpaseq1 = Ncvpaseq1+1 ENDIF IF (mod(itap,1000) == 0) THEN print *,' physiq, nombre de steps ou cvpas = 1 : ', Ncvpaseq1 ENDIF !!!jyg Appel diagnostique a add_phys_tend pour tester la conservation de !!! l'energie dans les courants satures. !! d_t_con_sat(:,:) = d_t_con(:,:) - ftd(:,:)*dtime !! d_q_con_sat(:,:) = d_q_con(:,:) - fqd(:,:)*dtime !! dql_sat(:,:) = (wdtrainA(:,:)+wdtrainM(:,:))*dtime/zmasse(:,:) !! CALL add_phys_tend(d_u_con, d_v_con, d_t_con_sat, d_q_con_sat, dql_sat, & !! dqi0, paprs, 'convection_sat', abortphy, flag_inhib_tend,& !! itap, 1) !! call prt_enerbil('convection_sat',itap) !! !! CALL add_phys_tend(d_u_con, d_v_con, d_t_con, d_q_con, dql0, dqi0, paprs, & 'convection',abortphy,flag_inhib_tend,itap,0 & #ifdef ISO & ,d_xt_con,dxtl0,dxti0 & #endif & ) CALL prt_enerbil('convection',itap) !------------------------------------------------------------------------- IF (mydebug) THEN CALL writefield_phy('u_seri',u_seri,nbp_lev) CALL writefield_phy('v_seri',v_seri,nbp_lev) CALL writefield_phy('t_seri',t_seri,nbp_lev) CALL writefield_phy('q_seri',q_seri,nbp_lev) ENDIF IF (check) THEN za = qcheck(klon,klev,paprs,q_seri,ql_seri,cell_area) WRITE(lunout,*)"aprescon=", za zx_t = 0.0 za = 0.0 DO i = 1, klon za = za + cell_area(i)/REAL(klon) zx_t = zx_t + (rain_con(i)+ & snow_con(i))*cell_area(i)/REAL(klon) ENDDO zx_t = zx_t/za*phys_tstep WRITE(lunout,*)"Precip=", zx_t ENDIF IF (zx_ajustq) THEN DO i = 1, klon z_apres(i) = 0.0 #ifdef ISO do ixt=1,ntraciso zxt_apres(ixt,i) = 0.0 enddo !do ixt=1,ntraciso #endif ENDDO DO k = 1, klev DO i = 1, klon z_apres(i) = z_apres(i) + (q_seri(i,k)+ql_seri(i,k)) & *(paprs(i,k)-paprs(i,k+1))/RG ENDDO ENDDO #ifdef ISO DO k = 1, klev DO i = 1, klon do ixt=1,ntraciso zxt_apres(ixt,i) = zxt_apres(ixt,i) & & + (xt_seri(ixt,i,k)+xtl_seri(ixt,i,k)) & & *(paprs(i,k)-paprs(i,k+1))/RG enddo ! do ixt=1,ntraciso ENDDO ENDDO #endif DO i = 1, klon z_factor(i) = (z_avant(i)-(rain_con(i)+snow_con(i))*phys_tstep) & /z_apres(i) ENDDO #ifdef ISO DO i = 1, klon do ixt=1,ntraciso zxt_factor(ixt,i) = (zxt_avant(ixt,i)-(xtrain_con(ixt,i) & & +xtsnow_con(ixt,i))*phys_tstep)/zxt_apres(ixt,i) enddo ! do ixt=1,ntraciso ENDDO #endif DO k = 1, klev DO i = 1, klon IF (z_factor(i).GT.(1.0+1.0E-08) .OR. & z_factor(i).LT.(1.0-1.0E-08)) THEN q_seri(i,k) = q_seri(i,k) * z_factor(i) #ifdef ISO do ixt=1,ntraciso xt_seri(ixt,i,k)=xt_seri(ixt,i,k)*zxt_factor(ixt,i) enddo ! do ixt=1,ntraciso #endif ENDIF ENDDO ENDDO ENDIF zx_ajustq=.FALSE. #ifdef ISO #ifdef ISOVERIF write(*,*) 'physiq 3425: apres convection' if (iso_HDO.gt.0) then call iso_verif_aberrant_enc_vect2D( & & xt_seri,q_seri, & & 'physiq 3691a',ntraciso,klon,klev) endif if ((iso_HDO.gt.0).and.(iso_O18.gt.0)) then call iso_verif_O18_aberrant_enc_vect2D( & & xt_seri,q_seri, & & 'physiq 3691b',ntraciso,klon,klev) endif #ifdef ISOTRAC call iso_verif_traceur_vect(xt_seri,klon,klev, & & 'physiq 3386 avant wakes') #endif #endif #endif ! !========================================================================== !RR:Evolution de la poche froide: on ne fait pas de separation wake/env !pour la couche limite diffuse pour l instant ! ! ! nrlmd le 22/03/2011---Si on met les poches hors des thermiques ! il faut rajouter cette tendance calcul\'ee hors des poches ! froides ! IF (iflag_wake>=1) THEN ! ! ! Call wakes every "wkpas" step ! IF (MOD(itapwk,wkpas).EQ.0) THEN ! DO k=1,klev DO i=1,klon dt_dwn(i,k) = ftd(i,k) dq_dwn(i,k) = fqd(i,k) M_dwn(i,k) = dnwd0(i,k) M_up(i,k) = upwd(i,k) dt_a(i,k) = d_t_con(i,k)/phys_tstep - ftd(i,k) dq_a(i,k) = d_q_con(i,k)/phys_tstep - fqd(i,k) #ifdef ISO do ixt=1,ntraciso dxt_dwn(ixt,i,k) = fxtd(ixt,i,k) dxt_a(ixt,i,k) = d_xt_con(ixt,i,k)/phys_tstep - fxtd(ixt,i,k) enddo !do ixt=1,ntraciso #endif ENDDO ENDDO IF (iflag_wake==2) THEN ok_wk_lsp(:)=max(sign(1.,wake_s(:)-wake_s_min_lsp),0.) DO k = 1,klev dt_dwn(:,k)= dt_dwn(:,k)+ & ok_wk_lsp(:)*(d_t_eva(:,k)+d_t_lsc(:,k))/phys_tstep dq_dwn(:,k)= dq_dwn(:,k)+ & ok_wk_lsp(:)*(d_q_eva(:,k)+d_q_lsc(:,k))/phys_tstep #ifdef ISO do ixt=1,ntraciso dxt_dwn(:,k,ixt)= dxt_dwn(:,k,ixt)+ & ok_wk_lsp(:)*(d_xt_eva(:,k,ixt)+d_xt_lsc(:,k,ixt))/phys_tstep enddo #endif ENDDO ELSEIF (iflag_wake==3) THEN ok_wk_lsp(:)=max(sign(1.,wake_s(:)-wake_s_min_lsp),0.) DO k = 1,klev DO i=1,klon IF (rneb(i,k)==0.) THEN ! On ne tient compte des tendances qu'en dehors des ! nuages (c'est-\`a-dire a priri dans une region ou ! l'eau se reevapore). dt_dwn(i,k)= dt_dwn(i,k)+ & ok_wk_lsp(i)*d_t_lsc(i,k)/phys_tstep dq_dwn(i,k)= dq_dwn(i,k)+ & ok_wk_lsp(i)*d_q_lsc(i,k)/phys_tstep #ifdef ISO do ixt=1,ntraciso dxt_dwn(:,k,ixt)= dxt_dwn(:,k,ixt)+ & ok_wk_lsp(:)*d_xt_lsc(:,k,ixt)/phys_tstep enddo #endif ENDIF ENDDO ENDDO ENDIF #ifdef ISOVERIF write(*,*) 'physiq 3977: verif des inputs de calwake' DO k = 1,klev DO i=1,klon if (iso_eau.gt.0) then call iso_verif_egalite(q_seri(i,k),xt_seri(iso_eau,i,k),'physiq 3981a') call iso_verif_egalite(dq_dwn(i,k),dxt_dwn(iso_eau,i,k),'physiq 3981b') call iso_verif_egalite(dq_a(i,k),dxt_a(iso_eau,i,k),'physiq 3981c') call iso_verif_egalite(wake_deltaq(i,k),wake_deltaxt(iso_eau,i,k),'physiq 3981d') endif enddo enddo #endif ! !calcul caracteristiques de la poche froide CALL calWAKE (iflag_wake_tend, paprs, pplay, phys_tstep, & t_seri, q_seri, omega, & dt_dwn, dq_dwn, M_dwn, M_up, & dt_a, dq_a, cv_gen, & sigd, cin, & wake_deltat, wake_deltaq, wake_s, awake_dens, wake_dens, & wake_dth, wake_h, & !! wake_pe, wake_fip, wake_gfl, & wake_pe, wake_fip_0, wake_gfl, & !! jyg d_t_wake, d_q_wake, & wake_k, t_x, q_x, & wake_omgbdth, wake_dp_omgb, & wake_dtKE, wake_dqKE, & wake_omg, wake_dp_deltomg, & wake_spread, wake_Cstar, d_deltat_wk_gw, & d_deltat_wk, d_deltaq_wk, d_s_wk, d_dens_a_wk, d_dens_wk & #ifdef ISO & ,xt_seri,dxt_dwn,dxt_a & & ,wake_deltaxt,d_xt_wake,xt_x,d_deltaxt_wk & #endif & ) ! !jyg Reinitialize itapwk when wakes have been called itapwk = 0 ENDIF ! (MOD(itapwk,wkpas).EQ.0) ! itapwk = itapwk+1 #ifdef ISOVERIF write(*,*) 'physiq 4020: verif des outputs de calwake' DO k = 1,klev DO i=1,klon if (iso_eau.gt.0) then call iso_verif_egalite(d_q_wake(i,k),d_xt_wake(iso_eau,i,k),'physiq 4023a') call iso_verif_egalite(q_x(i,k),xt_x(iso_eau,i,k),'physiq 4023b') call iso_verif_egalite(d_deltaq_wk(i,k),d_deltaxt_wk(iso_eau,i,k),'physiq 4023c') endif enddo enddo #endif ! !----------------------------------------------------------------------- ! ajout des tendances des poches froides CALL add_phys_tend(du0,dv0,d_t_wake,d_q_wake,dql0,dqi0,paprs,'wake', & abortphy,flag_inhib_tend,itap,0 & #ifdef ISO & ,d_xt_wake,dxtl0,dxti0 & #endif & ) CALL prt_enerbil('wake',itap) !------------------------------------------------------------------------ ! Increment Wake state variables IF (iflag_wake_tend .GT. 0.) THEN CALL add_wake_tend & (d_deltat_wk, d_deltaq_wk, d_s_wk, d_dens_a_wk, d_dens_wk, wake_k, & 'wake', abortphy & #ifdef ISO ,d_deltaxt_wk & #endif ) CALL prt_enerbil('wake',itap) ENDIF ! (iflag_wake_tend .GT. 0.) ! IF (prt_level .GE. 10) THEN print *,' physiq, after calwake, wake_s: ',wake_s(:) print *,' physiq, after calwake, wake_deltat: ',wake_deltat(:,1) print *,' physiq, after calwake, wake_deltaq: ',wake_deltaq(:,1) ENDIF IF (iflag_alp_wk_cond .GT. 0.) THEN CALL alpale_wk(phys_tstep, cell_area, wake_k, wake_s, wake_dens, wake_fip_0, & wake_fip) ELSE wake_fip(:) = wake_fip_0(:) ENDIF ! (iflag_alp_wk_cond .GT. 0.) ENDIF ! (iflag_wake>=1) ! !=================================================================== ! Convection seche (thermiques ou ajustement) !=================================================================== ! CALL stratocu_if(klon,klev,pctsrf,paprs, pplay,t_seri & ,seuil_inversion,weak_inversion,dthmin) d_t_ajsb(:,:)=0. d_q_ajsb(:,:)=0. d_t_ajs(:,:)=0. d_u_ajs(:,:)=0. d_v_ajs(:,:)=0. d_q_ajs(:,:)=0. clwcon0th(:,:)=0. #ifdef ISO d_xt_ajs(:,:,:)=0.0 d_xt_ajsb(:,:,:)=0.0 #endif ! ! fm_therm(:,:)=0. ! entr_therm(:,:)=0. ! detr_therm(:,:)=0. ! IF (prt_level>9) WRITE(lunout,*) & 'AVANT LA CONVECTION SECHE , iflag_thermals=' & ,iflag_thermals,' nsplit_thermals=',nsplit_thermals IF (iflag_thermals<0) THEN ! Rien ! ==== IF (prt_level>9) WRITE(lunout,*)'pas de convection seche' #ifdef ISO #ifdef ISOVERIF call iso_verif_noNaN_vect2D(xt_seri,'physiq 3971', & & ntraciso,klon,klev) #endif #ifdef ISOVERIF write(*,*) 'physiq 3570' do k=1,klev do i=1,klon if (iso_eau.gt.0) then call iso_verif_egalite_choix(xt_seri(iso_eau,i,k), & & q_seri(i,k),'physiq 2765',errmax,errmaxrel) endif !if (iso_eau.gt.0) then if (iso_HDO.gt.0) then if (q_seri(i,k).gt.ridicule) then call iso_verif_aberrant_encadre(xt_seri(iso_HDO,i,k)/ & & q_seri(i,k),'physiq 2770') endif !if (abs(d_q_ajs(i,k)).gt.ridicule) then endif !if (iso_HDO.gt.0) then if ((iso_HDO.gt.0).and.(iso_O18.gt.0)) then if (q_seri(i,k).gt.ridicule) then if (iso_verif_o18_aberrant_nostop( & & xt_seri(iso_HDO,i,k)/q_seri(i,k), & & xt_seri(iso_O18,i,k)/q_seri(i,k), & & 'physiq 3978, avant calltherm').eq.1) then write(*,*) 'physic 4115: i,k,q_seri(i,k)=',i,k,q_seri(i,k) stop endif ! if (iso_verif_o18_aberrant_nostop endif !if (q_seri(i,k).gt.errmax) then endif !if ((iso_HDO.gt.0).and.(iso_O18.gt.0)) then if ((iso_O17.gt.0).and.(iso_O18.gt.0)) then if ((q_seri(i,k).gt.ridicule).and.(l.lt.nlevmaxO17)) then call iso_verif_aberrant_o17(xt_seri(iso_o17,i,k) & & /q_seri(i,k),xt_seri(iso_o18,i,k) & & /q_seri(i,k),'physiq 3178: avant clmain') endif !if (q_seri(i,k).gt.ridicule) then endif !if (iso_O17.gt.0) then #ifdef ISOTRAC call iso_verif_traceur(xt_seri(1,i,k),'physiq 3389') if (iso_verif_tracpos_choix_nostop(xt_seri(1,i,k), & & 'physiq 3481, avant ajsec',1e-5) & & .eq.1) then write(*,*) 'i,k=',i,k #ifdef ISOVERIF stop #endif !#ifdef ISOVERIF endif !if (iso_verif_tracpos_choix_nostop(xt_seri(1,i,k), #endif !#ifdef ISOTRAC enddo !do i=1,klon enddo !do k=1,klev #endif !#ifdef ISOVERIF if ((iso_eau.gt.0).and.(bidouille_anti_divergence)) then do k=1,klev do i=1,klon xt_seri(iso_eau,i,k)=q_seri(i,k) enddo !do i=1,klon enddo !do k=1,klev #ifdef ISOTRAC call iso_verif_traceur_jbid_vect(xt_seri, & & klon,klev) #endif endif !if ((iso_eau.gt.0).and.(bidouille_anti_divergence)) then #endif !#ifdef ISO ELSE ! Thermiques ! ========== IF (prt_level>9) WRITE(lunout,*)'JUSTE AVANT , iflag_thermals=' & ,iflag_thermals,' nsplit_thermals=',nsplit_thermals !cc nrlmd le 10/04/2012 DO k=1,klev+1 DO i=1,klon pbl_tke_input(i,k,is_oce)=pbl_tke(i,k,is_oce) pbl_tke_input(i,k,is_ter)=pbl_tke(i,k,is_ter) pbl_tke_input(i,k,is_lic)=pbl_tke(i,k,is_lic) pbl_tke_input(i,k,is_sic)=pbl_tke(i,k,is_sic) ENDDO ENDDO !cc fin nrlmd le 10/04/2012 IF (iflag_thermals>=1) THEN !jyg< !! IF (mod(iflag_pbl_split/2,2) .EQ. 1) THEN IF (mod(iflag_pbl_split/10,10) .GE. 1) THEN ! Appel des thermiques avec les profils exterieurs aux poches DO k=1,klev DO i=1,klon t_therm(i,k) = t_seri(i,k) - wake_s(i)*wake_deltat(i,k) q_therm(i,k) = q_seri(i,k) - wake_s(i)*wake_deltaq(i,k) u_therm(i,k) = u_seri(i,k) v_therm(i,k) = v_seri(i,k) #ifdef ISO do ixt=1,ntraciso xt_therm(ixt,i,k) = xt_seri(ixt,i,k) - wake_s(i)*wake_deltaxt(ixt,i,k) enddo !do ixt=1,ntraciso #endif ENDDO ENDDO ELSE ! Appel des thermiques avec les profils moyens DO k=1,klev DO i=1,klon t_therm(i,k) = t_seri(i,k) q_therm(i,k) = q_seri(i,k) u_therm(i,k) = u_seri(i,k) v_therm(i,k) = v_seri(i,k) #ifdef ISO do ixt=1,ntraciso xt_therm(ixt,i,k) = xt_seri(ixt,i,k) enddo !do ixt=1,ntraciso #endif ENDDO ENDDO ENDIF #ifdef ISO #ifdef ISOTRAC ! ajout C Risi juillet 2020: pas sure de ce que je fais... call iso_verif_traceur_jbid_pos_vect(klon,klev,xt_seri) call iso_verif_traceur_jbid_pos_vect(klon,klev,xt_therm) #endif #endif !>jyg CALL calltherm(pdtphys & ,pplay,paprs,pphi,weak_inversion & ! ,u_seri,v_seri,t_seri,q_seri,zqsat,debut & !jyg ,u_therm,v_therm,t_therm,q_therm,zqsat,debut & !jyg ,d_u_ajs,d_v_ajs,d_t_ajs,d_q_ajs & ,fm_therm,entr_therm,detr_therm & ,zqasc,clwcon0th,lmax_th,ratqscth & ,ratqsdiff,zqsatth & !on rajoute ale et alp, et les !caracteristiques de la couche alim ,Ale_bl,Alp_bl,lalim_conv,wght_th, zmax0, f0, zw2,fraca & ,ztv,zpspsk,ztla,zthl & !cc nrlmd le 10/04/2012 ,pbl_tke_input,pctsrf,omega,cell_area & ,zlcl_th,fraca0,w0,w_conv,therm_tke_max0,env_tke_max0 & ,n2,s2,ale_bl_stat & ,therm_tke_max,env_tke_max & ,alp_bl_det,alp_bl_fluct_m,alp_bl_fluct_tke & ,alp_bl_conv,alp_bl_stat & !cc fin nrlmd le 10/04/2012 ,zqla,ztva & #ifdef ISO & ,xt_therm,d_xt_ajs & #ifdef DIAGISO & ,q_the,xt_the & #endif #endif & ) ! !jyg< !!jyg IF (mod(iflag_pbl_split/2,2) .EQ. 1) THEN IF (mod(iflag_pbl_split/10,10) .GE. 1) THEN ! Si les thermiques ne sont presents que hors des ! poches, la tendance moyenne associ\'ee doit etre ! multipliee par la fraction surfacique qu'ils couvrent. DO k=1,klev DO i=1,klon ! d_deltat_the(i,k) = - d_t_ajs(i,k) d_deltaq_the(i,k) = - d_q_ajs(i,k) ! d_u_ajs(i,k) = d_u_ajs(i,k)*(1.-wake_s(i)) d_v_ajs(i,k) = d_v_ajs(i,k)*(1.-wake_s(i)) d_t_ajs(i,k) = d_t_ajs(i,k)*(1.-wake_s(i)) d_q_ajs(i,k) = d_q_ajs(i,k)*(1.-wake_s(i)) #ifdef ISO do ixt=1,ntraciso d_deltaxt_the(ixt,i,k) = - d_xt_ajs(ixt,i,k) d_xt_ajs(ixt,i,k) = d_xt_ajs(ixt,i,k)*(1.-wake_s(i)) enddo #endif ! ENDDO ENDDO ! IF (ok_bug_split_th) THEN CALL add_wake_tend & (d_deltat_the, d_deltaq_the, dsig0, ddens0, ddens0, wkoccur1, 'the', abortphy & #ifdef ISO ,d_deltaxt_the & #endif &) ELSE CALL add_wake_tend & (d_deltat_the, d_deltaq_the, dsig0, ddens0, ddens0, wake_k, 'the', abortphy & #ifdef ISO ,d_deltaxt_the & #endif &) ENDIF CALL prt_enerbil('the',itap) ! ENDIF ! (mod(iflag_pbl_split/10,10) .GE. 1) ! CALL add_phys_tend(d_u_ajs,d_v_ajs,d_t_ajs,d_q_ajs, & dql0,dqi0,paprs,'thermals', abortphy,flag_inhib_tend,itap,0 & #ifdef ISO & ,d_xt_ajs,dxtl0,dxti0 & #endif & ) CALL prt_enerbil('thermals',itap) ! ! CALL alpale_th( phys_tstep, lmax_th, t_seri, cell_area, & cin, s2, n2, & ale_bl_trig, ale_bl_stat, ale_bl, & alp_bl, alp_bl_stat, & proba_notrig, random_notrig, cv_gen) !>jyg ! ------------------------------------------------------------------ ! Transport de la TKE par les panaches thermiques. ! FH : 2010/02/01 ! if (iflag_pbl.eq.10) then ! call thermcell_dtke(klon,klev,nbsrf,pdtphys,fm_therm,entr_therm, ! s rg,paprs,pbl_tke) ! endif ! ------------------------------------------------------------------- DO i=1,klon ! zmax_th(i)=pphi(i,lmax_th(i))/rg !CR:04/05/12:correction calcul zmax zmax_th(i)=zmax0(i) ENDDO ENDIF ! Ajustement sec ! ============== ! Dans le cas o\`u on active les thermiques, on fait partir l'ajustement ! a partir du sommet des thermiques. ! Dans le cas contraire, on demarre au niveau 1. IF (iflag_thermals>=13.or.iflag_thermals<=0) THEN IF (iflag_thermals.eq.0) THEN IF (prt_level>9) WRITE(lunout,*)'ajsec' limbas(:)=1 ELSE limbas(:)=lmax_th(:) ENDIF ! Attention : le call ajsec_convV2 n'est maintenu que momentanneement ! pour des test de convergence numerique. ! Le nouveau ajsec est a priori mieux, meme pour le cas ! iflag_thermals = 0 (l'ancienne version peut faire des tendances ! non nulles numeriquement pour des mailles non concernees. #ifdef ISO #ifdef ISOVERIF call iso_verif_noNaN_vect2D(xt_seri,'physiq 4112', & & ntraciso,klon,klev) #endif #ifdef ISOVERIF write(*,*) 'physiq 3691c: avant call ajsec' if (iso_eau.gt.0) then call iso_verif_egalite_vect2D( & & xt_seri,q_seri, & & 'physiq 3727, avant ajsec',ntraciso,klon,klev) endif if (iso_HDO.gt.0) then call iso_verif_aberrant_enc_vect2D( & & xt_seri,q_seri, & & 'physiq 3732, avant ajsec',ntraciso,klon,klev) endif if ((iso_HDO.gt.0).and.(iso_O18.gt.0)) then do k = 1, klev do i = 1, klon if (q_seri(i,k).gt.ridicule) then if (iso_verif_o18_aberrant_nostop( & & xt_seri(iso_HDO,i,k)/q_seri(i,k), & & xt_seri(iso_O18,i,k)/q_seri(i,k), & & 'physiq 4051, avant ajsec').eq.1) then write(*,*) 'physiq 4367: i,k,q_seri(i,k)=',i,k,q_seri(i,k) stop endif ! if (iso_verif_o18_aberrant_nostop endif !if (q_seri(i,k).gt.errmax) then enddo !do i = 1, klon enddo !do k = 1, klev endif !if ((iso_HDO.gt.0).and.(iso_O18.gt.0)) then #ifdef ISOTRAC call iso_verif_traceur_vect(xt_seri,klon,klev, & & 'physiq 3600 avant ajsec') #endif !#ifdef ISOTRAC #endif !#ifdef ISOVERIF #endif !#ifdef ISO IF (iflag_thermals==0) THEN ! Calling adjustment alone (but not the thermal plume model) CALL ajsec_convV2(paprs, pplay, t_seri,q_seri & , d_t_ajsb, d_q_ajsb & #ifdef ISO & ,xt_seri,d_xt_ajsb & #endif & ) ELSE IF (iflag_thermals>0) THEN ! Calling adjustment above the top of thermal plumes CALL ajsec(paprs, pplay, t_seri,q_seri,limbas & , d_t_ajsb, d_q_ajsb & #ifdef ISO & ,xt_seri,d_xt_ajsb & #endif & ) ENDIF !-------------------------------------------------------------------- ! ajout des tendances de l'ajustement sec ou des thermiques CALL add_phys_tend(du0,dv0,d_t_ajsb,d_q_ajsb,dql0,dqi0,paprs, & 'ajsb',abortphy,flag_inhib_tend,itap,0 & #ifdef ISO & ,d_xt_ajsb,dxtl0,dxti0 & #endif & ) CALL prt_enerbil('ajsb',itap) d_t_ajs(:,:)=d_t_ajs(:,:)+d_t_ajsb(:,:) d_q_ajs(:,:)=d_q_ajs(:,:)+d_q_ajsb(:,:) #ifdef ISO d_xt_ajs(:,:,:)=d_xt_ajs(:,:,:)+d_xt_ajsb(:,:,:) #endif !--------------------------------------------------------------------- ENDIF ENDIF ! !=================================================================== ! Computation of ratqs, the width (normalized) of the subrid scale ! water distribution tke_dissip_ave(:,:)=0. l_mix_ave(:,:)=0. wprime_ave(:,:)=0. DO nsrf = 1, nbsrf DO i = 1, klon tke_dissip_ave(i,:) = tke_dissip_ave(i,:) + tke_dissip(i,:,nsrf)*pctsrf(i,nsrf) l_mix_ave(i,:) = l_mix_ave(i,:) + l_mix(i,:,nsrf)*pctsrf(i,nsrf) wprime_ave(i,:) = wprime_ave(i,:) + wprime(i,:,nsrf)*pctsrf(i,nsrf) ENDDO ENDDO CALL calcratqs(klon,klev,prt_level,lunout, & iflag_ratqs,iflag_con,iflag_cld_th,pdtphys, & ratqsbas,ratqshaut,ratqsp0, ratqsdp, & tau_ratqs,fact_cldcon,wake_s, wake_deltaq, & ptconv,ptconvth,clwcon0th, rnebcon0th, & paprs,pplay,t_seri,q_seri, qtc_cv, sigt_cv, zqsat, & pbl_tke(:,:,is_ave),tke_dissip_ave,l_mix_ave,wprime_ave,t2m,q2m,fm_therm, & ratqs,ratqsc,ratqs_inter) ! ! Appeler le processus de condensation a grande echelle ! et le processus de precipitation !------------------------------------------------------------------------- IF (prt_level .GE.10) THEN print *,'itap, ->fisrtilp ',itap ENDIF ! #ifdef ISO #ifdef ISOVERIF write(*,*) 'physiq 3837: verif avant ilp' #endif #ifdef ISOVERIF if (iso_eau.gt.0) then call iso_verif_egalite_vect2D( & & xt_seri,q_seri, & & 'physiq 3709, avant ilp',ntraciso,klon,klev) endif if (iso_HDO.gt.0) then call iso_verif_aberrant_enc_vect2D( & & xt_seri,q_seri, & & 'physiq 3714, avant ilp',ntraciso,klon,klev) endif #endif #ifdef ISOVERIF do k=1,klev do i=1,klon if ((iso_O17.gt.0).and.(iso_O18.gt.0)) then if ((q_seri(i,k).gt.ridicule).and.(l.lt.nlevmaxO17)) then call iso_verif_aberrant_o17(xt_seri(iso_o17,i,k) & & /q_seri(i,k),xt_seri(iso_o18,i,k) & & /q_seri(i,k),'physiq 3389') endif !if (q_seri(i,k).gt.ridicule) then endif !if (iso_O17.gt.0) then if ((iso_HDO.gt.0).and.(iso_O18.gt.0)) then if (q_seri(i,k).gt.ridicule) then if (iso_verif_o18_aberrant_nostop( & & xt_seri(iso_HDO,i,k)/q_seri(i,k), & & xt_seri(iso_O18,i,k)/q_seri(i,k), & & 'physiq 4177, avant il pleut').eq.1) then write(*,*) 'physic 4475: i,k,q_seri(i,k)=',i,k,q_seri(i,k) stop endif ! if (iso_verif_o18_aberrant_nostop endif !if (q_seri(i,k).gt.errmax) then endif !if ((iso_HDO.gt.0).and.(iso_O18.gt.0)) then #ifdef ISOTRAC call iso_verif_traceur(xt_seri(1,i,k),'physiq 3609') call iso_verif_traceur_pbidouille(xt_seri(1,i,k), & & 'physiq 3609') if (iso_verif_tracpos_choix_nostop(xt_seri(1,i,k), & & 'physiq 3707, avant fisrtilp',1e-5) & & .eq.1) then write(*,*) 'i,k=',i,k #ifdef ISOVERIF stop #endif endif if (option_tmin.eq.1) then call iso_verif_trac17_q_deltaD(xt_seri(1,i,k), & & 'physiq 3905, avant ilp') endif #endif !ISOTRAC enddo !do i=1,klon enddo !do k=1,klev ! verif température do k=1,klev do i=1,klon call iso_verif_positif(370.0-t_seri(i,k), & & 'physiq 3535, avant il pleut') call iso_verif_positif(t_seri(i,k)-100.0, & & 'physiq 3537, avant il pleut') enddo enddo write(*,*) 'physiq 3113: appel de fisrtilp' #endif !ISOVERIF if ((bidouille_anti_divergence).and. & & (iso_eau.gt.0)) then do k=1,klev do i=1,klon xt_seri(iso_eau,i,k)= q_seri(i,k) enddo !do i=1,klon enddo !do k=1,klev endif !if ((bidouille_anti_divergence).and. & #endif !ISO picefra(:,:)=0. IF (ok_new_lscp) THEN CALL lscp(phys_tstep,paprs,pplay, & t_seri, q_seri,ptconv,ratqs, & d_t_lsc, d_q_lsc, d_ql_lsc, d_qi_lsc, rneb, cldliq, picefra, & rain_lsc, snow_lsc, & pfrac_impa, pfrac_nucl, pfrac_1nucl, & frac_impa, frac_nucl, beta_prec_fisrt, & prfl, psfl, rhcl, & zqasc, fraca,ztv,zpspsk,ztla,zthl,iflag_cld_th, & iflag_ice_thermo) ELSE CALL fisrtilp(phys_tstep,paprs,pplay, & t_seri, q_seri,ptconv,ratqs, & d_t_lsc, d_q_lsc, d_ql_lsc, d_qi_lsc, rneb, cldliq, & rain_lsc, snow_lsc, & pfrac_impa, pfrac_nucl, pfrac_1nucl, & frac_impa, frac_nucl, beta_prec_fisrt, & prfl, psfl, rhcl, & zqasc, fraca,ztv,zpspsk,ztla,zthl,iflag_cld_th, & iflag_ice_thermo & #ifdef ISO & ,xt_seri,xtrain_lsc,xtsnow_lsc & & ,d_xt_lsc,d_xtl_lsc,d_xti_lsc,pxtrfl,pxtsfl & #endif & ) ENDIF ! WHERE (rain_lsc < 0) rain_lsc = 0. WHERE (snow_lsc < 0) snow_lsc = 0. #ifdef ISO WHERE (xtrain_lsc < 0) xtrain_lsc = 0. WHERE (xtsnow_lsc < 0) xtsnow_lsc = 0. #endif #ifdef ISO #ifdef ISOVERIF DO k = 1, klev do i=1,klon if (iso_O18.gt.0.and.iso_HDO.gt.0) then if (ql_seri(i,k).gt.ridicule) then call iso_verif_aberrant( & & xtl_seri(iso_HDO,i,k)/ql_seri(i,k),'physiq 4330') if (iso_O18.gt.0) then call iso_verif_o18_aberrant( & & xtl_seri(iso_HDO,i,k)/ql_seri(i,k), & & xtl_seri(iso_O18,i,k)/ql_seri(i,k), & & 'physiq 4335, avant il pleut') endif ! if (iso_O18.gt.0) then endif !if (ql_seri(i,k).gt.errmax) then endif !if (iso_HDO.gt.0) then ENDDO ! i=1,klon ENDDO !DO k = 1, klev #endif #endif !+JLD ! write(*,9000) 'phys lsc',"enerbil: bil_q, bil_e,",rain_lsc+snow_lsc & ! & ,((rcw-rcpd)*rain_lsc + (rcs-rcpd)*snow_lsc)*t_seri(1,1)-rlvtt*rain_lsc+rlstt*snow_lsc & ! & ,rain_lsc,snow_lsc ! write(*,9000) "rcpv","rcw",rcpv,rcw,rcs,t_seri(1,1) !-JLD CALL add_phys_tend(du0,dv0,d_t_lsc,d_q_lsc,d_ql_lsc,d_qi_lsc,paprs, & 'lsc',abortphy,flag_inhib_tend,itap,0 & #ifdef ISO & ,d_xt_lsc,d_xtl_lsc,d_xti_lsc & #endif & ) CALL prt_enerbil('lsc',itap) rain_num(:)=0. DO k = 1, klev DO i = 1, klon IF (ql_seri(i,k)>oliqmax) THEN rain_num(i)=rain_num(i)+(ql_seri(i,k)-oliqmax)*zmasse(i,k)/pdtphys #ifdef ISO do ixt=1,ntraciso xtl_seri(ixt,i,k)=xtl_seri(ixt,i,k)/ql_seri(i,k)*oliqmax enddo #endif ql_seri(i,k)=oliqmax ENDIF ENDDO ENDDO IF (nqo==3) THEN DO k = 1, klev DO i = 1, klon IF (qs_seri(i,k)>oicemax) THEN rain_num(i)=rain_num(i)+(qs_seri(i,k)-oicemax)*zmasse(i,k)/pdtphys #ifdef ISO do ixt=1,ntraciso xts_seri(ixt,i,k)=xts_seri(ixt,i,k)/qs_seri(i,k)*oliqmax enddo #endif qs_seri(i,k)=oicemax ENDIF ENDDO ENDDO ENDIF !--------------------------------------------------------------------------- DO k = 1, klev DO i = 1, klon cldfra(i,k) = rneb(i,k) !CR: a quoi ca sert? Faut-il ajouter qs_seri? IF (.NOT.new_oliq) cldliq(i,k) = ql_seri(i,k) ENDDO ENDDO #ifdef ISO !#ifdef ISOVERIF ! write(*,*) 'physiq 4030: verif apres ajout lsc' !#endif #ifdef ISOVERIF call iso_verif_noNaN_vect2D(xt_seri,'physiq 4565', & & ntraciso,klon,klev) #endif #ifdef ISOVERIF if (iso_eau.gt.0) then call iso_verif_egalite_vect2D( & & xt_seri,q_seri, & & 'physiq 2599, apres ajout lsc',ntraciso,klon,klev) endif if (iso_HDO.gt.0) then call iso_verif_aberrant_enc_vect2D( & & xt_seri,q_seri, & & 'physiq 2866, apres ajout lsc',ntraciso,klon,klev) endif #endif #ifdef ISOVERIF DO k = 1, klev DO i = 1, klon if (iso_eau.gt.0) then call iso_verif_egalite_choix( & & xtl_seri(iso_eau,i,k),ql_seri(i,k), & & 'physiq 2601',errmax,errmaxrel) endif !if (iso_eau.gt.0) then if (iso_HDO.gt.0) then if (q_seri(i,k).gt.ridicule) then if (iso_O18.gt.0) then if (iso_verif_o18_aberrant_nostop( & & xt_seri(iso_HDO,i,k)/q_seri(i,k), & & xt_seri(iso_O18,i,k)/q_seri(i,k), & & 'physiq 2863, after il pleut').eq.1) then write(*,*) 'physic 4656: i,k,q_seri(i,k)=',i,k,q_seri(i,k) stop endif endif ! if (iso_O18.gt.0) then endif !if (q_seri(i,k).gt.errmax) then if (ql_seri(i,k).gt.ridicule) then call iso_verif_aberrant( & & xtl_seri(iso_HDO,i,k)/ql_seri(i,k),'physiq 2871') if (iso_O18.gt.0) then if (iso_verif_o18_aberrant_nostop( & & xtl_seri(iso_HDO,i,k)/ql_seri(i,k), & & xtl_seri(iso_O18,i,k)/ql_seri(i,k), & & 'physiq 2872, after il pleut').eq.1) then write(*,*) 'i,k,ql_seri(i,k)=',i,k,ql_seri(i,k) write(*,*) 'd_ql_lsc(i,k)=',d_ql_lsc(i,k) write(*,*) 'deltaD(d_ql_lsc(i,k))=',deltaD( & & d_xtl_lsc(iso_HDO,i,k)/d_ql_lsc(i,k)) write(*,*) 'deltaO(d_ql_lsc(i,k))=',deltaO( & & d_xtl_lsc(iso_O18,i,k)/d_ql_lsc(i,k)) stop endif endif ! if (iso_O18.gt.0) then endif !if (ql_seri(i,k).gt.errmax) then endif !if (iso_HDO.gt.0) then ENDDO ! i=1,klon ENDDO !DO k = 1, klev if ((iso_O17.gt.0).and.(iso_O18.gt.0)) then do i=1,klon do k=1,nlev if ((q_seri(i,k).gt.ridicule).and.(l.lt.nlevmaxO17)) then call iso_verif_aberrant_o17(xt_seri(iso_o17,i,k) & & /q_seri(i,k),xt_seri(iso_o18,i,k) & & /q_seri(i,k),'physiq 3549') endif !if (q_seri(i,k).gt.ridicule) then enddo !do k=1,nlev enddo !do i=1,klon endif !if (iso_O17.gt.0) then #endif !#ifdef ISOVERIF #ifdef ISOTRAC #ifdef ISOVERIF call iso_verif_traceur_vect(xt_seri,klon,klev,'physiq 3794') if (option_tmin.eq.1) then if (nzone_temp.ge.5) then call iso_verif_tag17_q_deltaD_vect(xt_seri,klon,klev, & & 'physiq 3385: apres ilp') endif ! if (nzone_temp.ge.5) then endif !if (option_tmin.eq.1) then #endif !#ifdef ISOVERIF if (bidouille_anti_divergence) then call iso_verif_traceur_jbid_vect(xt_seri, & & klon,klev) endif ! si tag 22, on recolorise les zones très convectives dans les ! tropiques if (option_traceurs.eq.22) then call isotrac_recolorise_conv(xt_seri,latitude_deg,presnivs,rain_con) endif #endif !#ifdef ISOTRAC #endif !#ifdef ISO IF (check) THEN za = qcheck(klon,klev,paprs,q_seri,ql_seri,cell_area) WRITE(lunout,*)"apresilp=", za zx_t = 0.0 za = 0.0 DO i = 1, klon za = za + cell_area(i)/REAL(klon) zx_t = zx_t + (rain_lsc(i) & + snow_lsc(i))*cell_area(i)/REAL(klon) ENDDO zx_t = zx_t/za*phys_tstep WRITE(lunout,*)"Precip=", zx_t ENDIF IF (mydebug) THEN CALL writefield_phy('u_seri',u_seri,nbp_lev) CALL writefield_phy('v_seri',v_seri,nbp_lev) CALL writefield_phy('t_seri',t_seri,nbp_lev) CALL writefield_phy('q_seri',q_seri,nbp_lev) ENDIF ! !------------------------------------------------------------------- ! PRESCRIPTION DES NUAGES POUR LE RAYONNEMENT !------------------------------------------------------------------- ! 1. NUAGES CONVECTIFS ! !IM cf FH ! IF (iflag_cld_th.eq.-1) THEN ! seulement pour Tiedtke IF (iflag_cld_th.le.-1) THEN ! seulement pour Tiedtke snow_tiedtke=0. ! print*,'avant calcul de la pseudo precip ' ! print*,'iflag_cld_th',iflag_cld_th IF (iflag_cld_th.eq.-1) THEN rain_tiedtke=rain_con ELSE ! print*,'calcul de la pseudo precip ' rain_tiedtke=0. ! print*,'calcul de la pseudo precip 0' DO k=1,klev DO i=1,klon IF (d_q_con(i,k).lt.0.) THEN rain_tiedtke(i)=rain_tiedtke(i)-d_q_con(i,k)/pdtphys & *(paprs(i,k)-paprs(i,k+1))/rg ENDIF ENDDO ENDDO ENDIF ! ! call dump2d(iim,jjm,rain_tiedtke(2:klon-1),'PSEUDO PRECIP ') ! ! Nuages diagnostiques pour Tiedtke CALL diagcld1(paprs,pplay, & !IM cf FH. rain_con,snow_con,ibas_con,itop_con, rain_tiedtke,snow_tiedtke,ibas_con,itop_con, & diafra,dialiq) DO k = 1, klev DO i = 1, klon IF (diafra(i,k).GT.cldfra(i,k)) THEN cldliq(i,k) = dialiq(i,k) cldfra(i,k) = diafra(i,k) ENDIF ENDDO ENDDO ELSE IF (iflag_cld_th.ge.3) THEN ! On prend pour les nuages convectifs le max du calcul de la ! convection et du calcul du pas de temps precedent diminue d'un facteur ! facttemps facteur = pdtphys *facttemps DO k=1,klev DO i=1,klon rnebcon(i,k)=rnebcon(i,k)*facteur IF (rnebcon0(i,k)*clwcon0(i,k).GT.rnebcon(i,k)*clwcon(i,k)) THEN rnebcon(i,k)=rnebcon0(i,k) clwcon(i,k)=clwcon0(i,k) ENDIF ENDDO ENDDO ! On prend la somme des fractions nuageuses et des contenus en eau IF (iflag_cld_th>=5) THEN DO k=1,klev ptconvth(:,k)=fm_therm(:,k+1)>0. ENDDO IF (iflag_coupl==4) THEN ! Dans le cas iflag_coupl==4, on prend la somme des convertures ! convectives et lsc dans la partie des thermiques ! Le controle par iflag_coupl est peut etre provisoire. DO k=1,klev DO i=1,klon IF (ptconv(i,k).AND.ptconvth(i,k)) THEN cldliq(i,k)=cldliq(i,k)+rnebcon(i,k)*clwcon(i,k) cldfra(i,k)=min(cldfra(i,k)+rnebcon(i,k),1.) ELSE IF (ptconv(i,k)) THEN cldfra(i,k)=rnebcon(i,k) cldliq(i,k)=rnebcon(i,k)*clwcon(i,k) ENDIF ENDDO ENDDO ELSE IF (iflag_coupl==5) THEN DO k=1,klev DO i=1,klon cldfra(i,k)=min(cldfra(i,k)+rnebcon(i,k),1.) cldliq(i,k)=cldliq(i,k)+rnebcon(i,k)*clwcon(i,k) ENDDO ENDDO ELSE ! Si on est sur un point touche par la convection ! profonde et pas par les thermiques, on prend la ! couverture nuageuse et l'eau nuageuse de la convection ! profonde. !IM/FH: 2011/02/23 ! definition des points sur lesquels ls thermiques sont actifs DO k=1,klev DO i=1,klon IF (ptconv(i,k).AND. .NOT.ptconvth(i,k)) THEN cldfra(i,k)=rnebcon(i,k) cldliq(i,k)=rnebcon(i,k)*clwcon(i,k) ENDIF ENDDO ENDDO ENDIF ELSE ! Ancienne version cldfra(:,:)=min(max(cldfra(:,:),rnebcon(:,:)),1.) cldliq(:,:)=cldliq(:,:)+rnebcon(:,:)*clwcon(:,:) ENDIF ENDIF ! plulsc(:)=0. ! do k=1,klev,-1 ! do i=1,klon ! zzz=prfl(:,k)+psfl(:,k) ! if (.not.ptconvth.zzz.gt.0.) ! enddo prfl, psfl, ! enddo ! ! 2. NUAGES STARTIFORMES ! IF (ok_stratus) THEN CALL diagcld2(paprs,pplay,t_seri,q_seri, diafra,dialiq) DO k = 1, klev DO i = 1, klon IF (diafra(i,k).GT.cldfra(i,k)) THEN cldliq(i,k) = dialiq(i,k) cldfra(i,k) = diafra(i,k) ENDIF ENDDO ENDDO ENDIF ! ! Precipitation totale ! DO i = 1, klon rain_fall(i) = rain_con(i) + rain_lsc(i) snow_fall(i) = snow_con(i) + snow_lsc(i) ENDDO #ifdef ISO DO i = 1, klon do ixt=1,ntraciso xtrain_fall(ixt,i)=xtrain_con(ixt,i) + xtrain_lsc(ixt,i) xtsnow_fall(ixt,i)=xtsnow_con(ixt,i) + xtsnow_lsc(ixt,i) enddo ENDDO !DO i = 1, klon #ifdef ISOVERIF if (iso_eau.gt.0) then DO i = 1, klon call iso_verif_egalite_choix(xtsnow_fall(iso_eau,i), & & snow_fall(i),'physiq 3387', & & errmax,errmaxrel) if (iso_verif_positif_nostop(xtrain_lsc(iso_eau,i), & & 'physiq 4298').eq.1) then if (rain_lsc(i).ge.0.0) then write(*,*) 'rain_fall(i)=',rain_lsc(i) stop endif !if (rain_con(i).ge.0.0) then endif !if (iso_verif_positif_nostop if (iso_verif_positif_nostop(xtrain_fall(iso_eau,i), & & 'physiq 3405').eq.1) then if (rain_fall(i).ge.0.0) then write(*,*) 'rain_fall(i)=',rain_fall(i) stop endif !if (rain_con(i).ge.0.0) then endif !if (iso_verif_positif_nostop ENDDO !DO i = 1, klon endif !if (iso_eau.gt.0) then if (iso_HDO.gt.0) then DO i = 1, klon call iso_verif_aberrant_choix(xtsnow_fall(iso_hdo,i), & & snow_fall(i),ridicule_snow, & & deltalim_snow,'physiq 3856') enddo !DO i = 1, klon endif #ifdef ISOTRAC DO i = 1, klon call iso_verif_traceur(xtrain_fall(1,i),'physiq 4012') call iso_verif_traceur(xtsnow_fall(1,i),'physiq 4013') enddo #endif #endif #ifdef ISOVERIF do i=1,klon do ixt=1,ntraciso call iso_verif_noNaN(xtsnow_con(ixt,i), & & 'physiq 4942') call iso_verif_noNaN(xtsnow_lsc(ixt,i), & & 'physiq 4942') call iso_verif_noNaN(xtsnow_fall(ixt,i), & & 'physiq 4942') enddo !do ixt=1,ntraciso enddo ! do klon #endif #endif #ifdef ISO if ((iso_eau.gt.0).and.(bidouille_anti_divergence)) then do i=1,klon xtrain_fall(iso_eau,i)=rain_fall(i) enddo !do i=1,klon endif #endif ! ! Calculer l'humidite relative pour diagnostique ! DO k = 1, klev DO i = 1, klon zx_t = t_seri(i,k) IF (thermcep) THEN !! if (iflag_ice_thermo.eq.0) then !jyg zdelta = MAX(0.,SIGN(1.,rtt-zx_t)) !! else !jyg !! zdelta = MAX(0.,SIGN(1.,t_glace_min-zx_t)) !jyg !! endif !jyg zx_qs = r2es * FOEEW(zx_t,zdelta)/pplay(i,k) zx_qs = MIN(0.5,zx_qs) zcor = 1./(1.-retv*zx_qs) zx_qs = zx_qs*zcor ELSE !! IF (zx_t.LT.t_coup) THEN !jyg IF (zx_t.LT.rtt) THEN !jyg zx_qs = qsats(zx_t)/pplay(i,k) ELSE zx_qs = qsatl(zx_t)/pplay(i,k) ENDIF ENDIF zx_rh(i,k) = q_seri(i,k)/zx_qs IF (iflag_ice_thermo .GT. 0) THEN zx_rhl(i,k) = q_seri(i,k)/(qsatl(zx_t)/pplay(i,k)) zx_rhi(i,k) = q_seri(i,k)/(qsats(zx_t)/pplay(i,k)) ENDIF zqsat(i,k)=zx_qs ENDDO ENDDO !IM Calcul temp.potentielle a 2m (tpot) et temp. potentielle ! equivalente a 2m (tpote) pour diagnostique ! DO i = 1, klon tpot(i)=zt2m(i)*(100000./paprs(i,1))**RKAPPA IF (thermcep) THEN IF(zt2m(i).LT.RTT) then Lheat=RLSTT ELSE Lheat=RLVTT ENDIF ELSE IF (zt2m(i).LT.RTT) THEN Lheat=RLSTT ELSE Lheat=RLVTT ENDIF ENDIF tpote(i) = tpot(i)* & EXP((Lheat *qsat2m(i))/(RCPD*zt2m(i))) ENDDO IF (type_trac == 'inca' .OR. type_trac == 'inco') THEN ! ModThL #ifdef INCA CALL VTe(VTphysiq) CALL VTb(VTinca) calday = REAL(days_elapsed + 1) + jH_cur CALL chemtime(itap+itau_phy-1, date0, phys_tstep, itap) CALL AEROSOL_METEO_CALC( & calday,pdtphys,pplay,paprs,t,pmflxr,pmflxs, & prfl,psfl,pctsrf,cell_area, & latitude_deg,longitude_deg,u10m,v10m) zxsnow_dummy(:) = 0.0 CALL chemhook_begin (calday, & days_elapsed+1, & jH_cur, & pctsrf(1,1), & latitude_deg, & longitude_deg, & cell_area, & paprs, & pplay, & coefh(1:klon,1:klev,is_ave), & pphi, & t_seri, & u, & v, & rot, & wo(:, :, 1), & q_seri, & zxtsol, & zt2m, & zxsnow_dummy, & solsw, & albsol1, & rain_fall, & snow_fall, & itop_con, & ibas_con, & cldfra, & nbp_lon, & nbp_lat-1, & tr_seri(:,:,1+nqCO2:nbtr), & ftsol, & paprs, & cdragh, & cdragm, & pctsrf, & pdtphys, & itap) CALL VTe(VTinca) CALL VTb(VTphysiq) #endif ENDIF !type_trac = inca or inco IF (type_trac == 'repr') THEN #ifdef REPROBUS !CALL chemtime_rep(itap+itau_phy-1, date0, dtime, itap) CALL chemtime_rep(itap+itau_phy-1, date0, phys_tstep, itap) #endif ENDIF ! ! Appeler le rayonnement mais calculer tout d'abord l'albedo du sol. ! IF (MOD(itaprad,radpas).EQ.0) THEN ! !jq - introduce the aerosol direct and first indirect radiative forcings !jq - Johannes Quaas, 27/11/2003 (quaas@lmd.jussieu.fr) IF (flag_aerosol .GT. 0) THEN IF (iflag_rrtm .EQ. 0) THEN !--old radiation IF (.NOT. aerosol_couple) THEN ! CALL readaerosol_optic( & debut, flag_aerosol, itap, jD_cur-jD_ref, & pdtphys, pplay, paprs, t_seri, rhcl, presnivs, & mass_solu_aero, mass_solu_aero_pi, & tau_aero, piz_aero, cg_aero, & tausum_aero, tau3d_aero) ENDIF ELSE ! RRTM radiation IF (aerosol_couple .AND. config_inca == 'aero' ) THEN abort_message='config_inca=aero et rrtm=1 impossible' CALL abort_physic(modname,abort_message,1) ELSE ! #ifdef CPP_RRTM IF (NSW.EQ.6) THEN !--new aerosol properties SW and LW ! #ifdef CPP_Dust !--SPL aerosol model CALL splaerosol_optic_rrtm( ok_alw, pplay, paprs, t_seri, rhcl, & tr_seri, mass_solu_aero, mass_solu_aero_pi, & tau_aero_sw_rrtm, piz_aero_sw_rrtm, cg_aero_sw_rrtm, & tausum_aero, tau3d_aero) #else !--climatologies or INCA aerosols CALL readaerosol_optic_rrtm( debut, aerosol_couple, ok_alw, ok_volcan, & flag_aerosol, flag_bc_internal_mixture, itap, jD_cur-jD_ref, & pdtphys, pplay, paprs, t_seri, rhcl, presnivs, & tr_seri, mass_solu_aero, mass_solu_aero_pi, & tau_aero_sw_rrtm, piz_aero_sw_rrtm, cg_aero_sw_rrtm, & tausum_aero, drytausum_aero, tau3d_aero) #endif IF (flag_aerosol .EQ. 7) THEN CALL MACv2SP(pphis,pplay,paprs,longitude_deg,latitude_deg, & tau_aero_sw_rrtm,piz_aero_sw_rrtm,cg_aero_sw_rrtm) ENDIF ! ELSE IF (NSW.EQ.2) THEN !--for now we use the old aerosol properties ! CALL readaerosol_optic( & debut, flag_aerosol, itap, jD_cur-jD_ref, & pdtphys, pplay, paprs, t_seri, rhcl, presnivs, & mass_solu_aero, mass_solu_aero_pi, & tau_aero, piz_aero, cg_aero, & tausum_aero, tau3d_aero) ! !--natural aerosols tau_aero_sw_rrtm(:,:,1,:)=tau_aero(:,:,3,:) piz_aero_sw_rrtm(:,:,1,:)=piz_aero(:,:,3,:) cg_aero_sw_rrtm (:,:,1,:)=cg_aero (:,:,3,:) !--all aerosols tau_aero_sw_rrtm(:,:,2,:)=tau_aero(:,:,2,:) piz_aero_sw_rrtm(:,:,2,:)=piz_aero(:,:,2,:) cg_aero_sw_rrtm (:,:,2,:)=cg_aero (:,:,2,:) ! !--no LW optics tau_aero_lw_rrtm(:,:,:,:) = 1.e-15 ! ELSE abort_message='Only NSW=2 or 6 are possible with ' & // 'aerosols and iflag_rrtm=1' CALL abort_physic(modname,abort_message,1) ENDIF #else abort_message='You should compile with -rrtm if running ' & // 'with iflag_rrtm=1' CALL abort_physic(modname,abort_message,1) #endif ! ENDIF ENDIF ELSE !--flag_aerosol = 0 tausum_aero(:,:,:) = 0. drytausum_aero(:,:) = 0. mass_solu_aero(:,:) = 0. mass_solu_aero_pi(:,:) = 0. IF (iflag_rrtm .EQ. 0) THEN !--old radiation tau_aero(:,:,:,:) = 1.e-15 piz_aero(:,:,:,:) = 1. cg_aero(:,:,:,:) = 0. ELSE tau_aero_sw_rrtm(:,:,:,:) = 1.e-15 tau_aero_lw_rrtm(:,:,:,:) = 1.e-15 piz_aero_sw_rrtm(:,:,:,:) = 1.0 cg_aero_sw_rrtm(:,:,:,:) = 0.0 ENDIF ENDIF ! !--WMO criterion to determine tropopause CALL stratosphere_mask(missing_val, pphis, t_seri, pplay, latitude_deg) ! !--STRAT AEROSOL !--updates tausum_aero,tau_aero,piz_aero,cg_aero IF (flag_aerosol_strat.GT.0) THEN IF (prt_level .GE.10) THEN PRINT *,'appel a readaerosolstrat', mth_cur ENDIF IF (iflag_rrtm.EQ.0) THEN IF (flag_aerosol_strat.EQ.1) THEN CALL readaerosolstrato(debut) ELSE abort_message='flag_aerosol_strat must equal 1 for rrtm=0' CALL abort_physic(modname,abort_message,1) ENDIF ELSE #ifdef CPP_RRTM #ifndef CPP_StratAer !--prescribed strat aerosols !--only in the case of non-interactive strat aerosols IF (flag_aerosol_strat.EQ.1) THEN CALL readaerosolstrato1_rrtm(debut) ELSEIF (flag_aerosol_strat.EQ.2) THEN CALL readaerosolstrato2_rrtm(debut, ok_volcan) ELSE abort_message='flag_aerosol_strat must equal 1 or 2 for rrtm=1' CALL abort_physic(modname,abort_message,1) ENDIF #endif #else abort_message='You should compile with -rrtm if running ' & // 'with iflag_rrtm=1' CALL abort_physic(modname,abort_message,1) #endif ENDIF ELSE tausum_aero(:,:,id_STRAT_phy) = 0. ENDIF ! #ifdef CPP_RRTM #ifdef CPP_StratAer !--compute stratospheric mask CALL stratosphere_mask(missing_val, pphis, t_seri, pplay, latitude_deg) !--interactive strat aerosols CALL calcaerosolstrato_rrtm(pplay,t_seri,paprs,debut) #endif #endif !--fin STRAT AEROSOL ! ! Calculer les parametres optiques des nuages et quelques ! parametres pour diagnostiques: ! IF (aerosol_couple.AND.config_inca=='aero') THEN mass_solu_aero(:,:) = ccm(:,:,1) mass_solu_aero_pi(:,:) = ccm(:,:,2) ENDIF IF (ok_newmicro) then ! AI IF (iflag_rrtm.NE.0) THEN IF (iflag_rrtm.EQ.1) THEN #ifdef CPP_RRTM IF (ok_cdnc.AND.NRADLP.NE.3) THEN abort_message='RRTM choix incoherent NRADLP doit etre egal a 3 ' & // 'pour ok_cdnc' CALL abort_physic(modname,abort_message,1) ENDIF #else abort_message='You should compile with -rrtm if running with '//'iflag_rrtm=1' CALL abort_physic(modname,abort_message,1) #endif ENDIF CALL newmicro (flag_aerosol, ok_cdnc, bl95_b0, bl95_b1, & paprs, pplay, t_seri, cldliq, picefra, cldfra, & cldtau, cldemi, cldh, cldl, cldm, cldt, cldq, & flwp, fiwp, flwc, fiwc, & mass_solu_aero, mass_solu_aero_pi, & cldtaupi, re, fl, ref_liq, ref_ice, & ref_liq_pi, ref_ice_pi) ELSE CALL nuage (paprs, pplay, & t_seri, cldliq, picefra, cldfra, cldtau, cldemi, & cldh, cldl, cldm, cldt, cldq, & ok_aie, & mass_solu_aero, mass_solu_aero_pi, & bl95_b0, bl95_b1, & cldtaupi, re, fl) ENDIF ! !IM betaCRF ! cldtaurad = cldtau cldtaupirad = cldtaupi cldemirad = cldemi cldfrarad = cldfra ! IF (lon1_beta.EQ.-180..AND.lon2_beta.EQ.180..AND. & lat1_beta.EQ.90..AND.lat2_beta.EQ.-90.) THEN ! ! global ! !IM 251017 begin ! print*,'physiq betaCRF global zdtime=',zdtime !IM 251017 end DO k=1, klev DO i=1, klon IF (pplay(i,k).GE.pfree) THEN beta(i,k) = beta_pbl ELSE beta(i,k) = beta_free ENDIF IF (mskocean_beta) THEN beta(i,k) = beta(i,k) * pctsrf(i,is_oce) ENDIF cldtaurad(i,k) = cldtau(i,k) * beta(i,k) cldtaupirad(i,k) = cldtaupi(i,k) * beta(i,k) cldemirad(i,k) = cldemi(i,k) * beta(i,k) cldfrarad(i,k) = cldfra(i,k) * beta(i,k) ENDDO ENDDO ! ELSE ! ! regional ! DO k=1, klev DO i=1,klon ! IF (longitude_deg(i).ge.lon1_beta.AND. & longitude_deg(i).le.lon2_beta.AND. & latitude_deg(i).le.lat1_beta.AND. & latitude_deg(i).ge.lat2_beta) THEN IF (pplay(i,k).GE.pfree) THEN beta(i,k) = beta_pbl ELSE beta(i,k) = beta_free ENDIF IF (mskocean_beta) THEN beta(i,k) = beta(i,k) * pctsrf(i,is_oce) ENDIF cldtaurad(i,k) = cldtau(i,k) * beta(i,k) cldtaupirad(i,k) = cldtaupi(i,k) * beta(i,k) cldemirad(i,k) = cldemi(i,k) * beta(i,k) cldfrarad(i,k) = cldfra(i,k) * beta(i,k) ENDIF ! ENDDO ENDDO ! ENDIF !lecture de la chlorophylle pour le nouvel albedo de Sunghye Baek IF (ok_chlorophyll) THEN print*,"-- reading chlorophyll" CALL readchlorophyll(debut) ENDIF !--if ok_suntime_rrtm we use ancillay data for RSUN !--previous values are therefore overwritten !--this is needed for CMIP6 runs !--and only possible for new radiation scheme IF (iflag_rrtm.EQ.1.AND.ok_suntime_rrtm) THEN #ifdef CPP_RRTM CALL read_rsun_rrtm(debut) #endif ENDIF IF (mydebug) THEN CALL writefield_phy('u_seri',u_seri,nbp_lev) CALL writefield_phy('v_seri',v_seri,nbp_lev) CALL writefield_phy('t_seri',t_seri,nbp_lev) CALL writefield_phy('q_seri',q_seri,nbp_lev) ENDIF ! !sonia : If Iflag_radia >=2, pertubation of some variables !input to radiation (DICE) ! IF (iflag_radia .ge. 2) THEN zsav_tsol (:) = zxtsol(:) CALL perturb_radlwsw(zxtsol,iflag_radia) ENDIF IF (aerosol_couple.AND.config_inca=='aero') THEN #ifdef INCA CALL radlwsw_inca & (chemistry_couple, kdlon,kflev,dist, rmu0, fract, solaire, & paprs, pplay,zxtsol,albsol1, albsol2, t_seri,q_seri, & size(wo,3), wo, & cldfrarad, cldemirad, cldtaurad, & heat,heat0,cool,cool0,albpla, & topsw,toplw,solsw,sollw, & sollwdown, & topsw0,toplw0,solsw0,sollw0, & lwdn0, lwdn, lwup0, lwup, & swdn0, swdn, swup0, swup, & ok_ade, ok_aie, & tau_aero, piz_aero, cg_aero, & topswad_aero, solswad_aero, & topswad0_aero, solswad0_aero, & topsw_aero, topsw0_aero, & solsw_aero, solsw0_aero, & cldtaupirad, & topswai_aero, solswai_aero) #endif ELSE ! !IM calcul radiatif pour le cas actuel ! RCO2 = RCO2_act RCH4 = RCH4_act RN2O = RN2O_act RCFC11 = RCFC11_act RCFC12 = RCFC12_act ! !--interactive CO2 in ppm from carbon cycle IF (carbon_cycle_rad.AND..NOT.debut) THEN RCO2=RCO2_glo ENDIF ! IF (prt_level .GE.10) THEN print *,' ->radlwsw, number 1 ' ENDIF ! CALL radlwsw & (dist, rmu0, fract, & !albedo SB >>> ! paprs, pplay,zxtsol,albsol1, albsol2, & paprs, pplay,zxtsol,SFRWL,albsol_dir, albsol_dif, & !albedo SB <<< t_seri,q_seri,wo, & cldfrarad, cldemirad, cldtaurad, & ok_ade.OR.flag_aerosol_strat.GT.0, ok_aie, ok_volcan, flag_volc_surfstrat, & flag_aerosol, flag_aerosol_strat, flag_aer_feedback, & tau_aero, piz_aero, cg_aero, & tau_aero_sw_rrtm, piz_aero_sw_rrtm, cg_aero_sw_rrtm, & ! Rajoute par OB pour RRTM tau_aero_lw_rrtm, & cldtaupirad, & ! zqsat, flwcrad, fiwcrad, & zqsat, flwc, fiwc, & ref_liq, ref_ice, ref_liq_pi, ref_ice_pi, & heat,heat0,cool,cool0,albpla, & heat_volc,cool_volc, & topsw,toplw,solsw,solswfdiff,sollw, & sollwdown, & topsw0,toplw0,solsw0,sollw0, & lwdnc0, lwdn0, lwdn, lwupc0, lwup0, lwup, & swdnc0, swdn0, swdn, swupc0, swup0, swup, & topswad_aero, solswad_aero, & topswai_aero, solswai_aero, & topswad0_aero, solswad0_aero, & topsw_aero, topsw0_aero, & solsw_aero, solsw0_aero, & topswcf_aero, solswcf_aero, & !-C. Kleinschmitt for LW diagnostics toplwad_aero, sollwad_aero,& toplwai_aero, sollwai_aero, & toplwad0_aero, sollwad0_aero,& !-end ZLWFT0_i, ZFLDN0, ZFLUP0, & ZSWFT0_i, ZFSDN0, ZFSUP0) !lwoff=y, betalwoff=1. : offset LW CRE for radiation code and other !schemes toplw = toplw + betalwoff * (toplw0 - toplw) sollw = sollw + betalwoff * (sollw0 - sollw) lwdn = lwdn + betalwoff * (lwdn0 - lwdn) lwup = lwup + betalwoff * (lwup0 - lwup) sollwdown(:)= sollwdown(:) + betalwoff *(-1.*ZFLDN0(:,1) - & sollwdown(:)) cool = cool + betalwoff * (cool0 - cool) #ifndef CPP_XIOS !--OB 30/05/2016 modified 21/10/2016 !--here we return swaero_diag and dryaod_diag to FALSE !--and histdef will switch it back to TRUE if necessary !--this is necessary to get the right swaero at first step !--but only in the case of no XIOS as XIOS is covered elsewhere IF (debut) swaerofree_diag = .FALSE. IF (debut) swaero_diag = .FALSE. IF (debut) dryaod_diag = .FALSE. !--IM 15/09/2017 here we return ok_4xCO2atm to FALSE !--as for swaero_diag, see above IF (debut) ok_4xCO2atm = .FALSE. ! !IM 2eme calcul radiatif pour le cas perturbe ou au moins un !IM des taux doit etre different du taux actuel !IM Par defaut on a les taux perturbes egaux aux taux actuels ! IF (RCO2_per.NE.RCO2_act.OR. & RCH4_per.NE.RCH4_act.OR. & RN2O_per.NE.RN2O_act.OR. & RCFC11_per.NE.RCFC11_act.OR. & RCFC12_per.NE.RCFC12_act) ok_4xCO2atm =.TRUE. #endif ! IF (ok_4xCO2atm) THEN ! RCO2 = RCO2_per RCH4 = RCH4_per RN2O = RN2O_per RCFC11 = RCFC11_per RCFC12 = RCFC12_per ! IF (prt_level .GE.10) THEN print *,' ->radlwsw, number 2 ' ENDIF ! CALL radlwsw & (dist, rmu0, fract, & !albedo SB >>> ! paprs, pplay,zxtsol,albsol1, albsol2, & paprs, pplay,zxtsol,SFRWL,albsol_dir, albsol_dif, & !albedo SB <<< t_seri,q_seri,wo, & cldfrarad, cldemirad, cldtaurad, & ok_ade.OR.flag_aerosol_strat.GT.0, ok_aie, ok_volcan, flag_volc_surfstrat, & flag_aerosol, flag_aerosol_strat, flag_aer_feedback, & tau_aero, piz_aero, cg_aero, & tau_aero_sw_rrtm, piz_aero_sw_rrtm, cg_aero_sw_rrtm, & ! Rajoute par OB pour RRTM tau_aero_lw_rrtm, & cldtaupi, & ! zqsat, flwcrad, fiwcrad, & zqsat, flwc, fiwc, & ref_liq, ref_ice, ref_liq_pi, ref_ice_pi, & heatp,heat0p,coolp,cool0p,albplap, & heat_volc,cool_volc, & topswp,toplwp,solswp,solswfdiffp,sollwp, & sollwdownp, & topsw0p,toplw0p,solsw0p,sollw0p, & lwdnc0p, lwdn0p, lwdnp, lwupc0p, lwup0p, lwupp, & swdnc0p, swdn0p, swdnp, swupc0p, swup0p, swupp, & topswad_aerop, solswad_aerop, & topswai_aerop, solswai_aerop, & topswad0_aerop, solswad0_aerop, & topsw_aerop, topsw0_aerop, & solsw_aerop, solsw0_aerop, & topswcf_aerop, solswcf_aerop, & !-C. Kleinschmitt for LW diagnostics toplwad_aerop, sollwad_aerop,& toplwai_aerop, sollwai_aerop, & toplwad0_aerop, sollwad0_aerop,& !-end ZLWFT0_i, ZFLDN0, ZFLUP0, & ZSWFT0_i, ZFSDN0, ZFSUP0) endif !ok_4xCO2atm ENDIF ! aerosol_couple itaprad = 0 ! ! If Iflag_radia >=2, reset pertubed variables ! IF (iflag_radia .ge. 2) THEN zxtsol(:) = zsav_tsol (:) ENDIF ENDIF ! MOD(itaprad,radpas) itaprad = itaprad + 1 IF (iflag_radia.eq.0) THEN IF (prt_level.ge.9) THEN PRINT *,'--------------------------------------------------' PRINT *,'>>>> ATTENTION rayonnement desactive pour ce cas' PRINT *,'>>>> heat et cool mis a zero ' PRINT *,'--------------------------------------------------' ENDIF heat=0. cool=0. sollw=0. ! MPL 01032011 solsw=0. radsol=0. swup=0. ! MPL 27102011 pour les fichiers AMMA_profiles et AMMA_scalars swup0=0. lwup=0. lwup0=0. lwdn=0. lwdn0=0. ENDIF ! ! Calculer radsol a l'exterieur de radlwsw ! pour prendre en compte le cycle diurne ! recode par Olivier Boucher en sept 2015 ! radsol=solsw*swradcorr+sollw IF (ok_4xCO2atm) THEN radsolp=solswp*swradcorr+sollwp ENDIF ! ! Ajouter la tendance des rayonnements (tous les pas) ! avec une correction pour le cycle diurne dans le SW ! DO k=1, klev d_t_swr(:,k)=swradcorr(:)*heat(:,k)*phys_tstep/RDAY d_t_sw0(:,k)=swradcorr(:)*heat0(:,k)*phys_tstep/RDAY d_t_lwr(:,k)=-cool(:,k)*phys_tstep/RDAY d_t_lw0(:,k)=-cool0(:,k)*phys_tstep/RDAY ENDDO CALL add_phys_tend(du0,dv0,d_t_swr,dq0,dql0,dqi0,paprs,'SW',abortphy,flag_inhib_tend,itap,0 & #ifdef ISO & ,dxt0,dxtl0,dxti0 & #endif & ) CALL prt_enerbil('SW',itap) CALL add_phys_tend(du0,dv0,d_t_lwr,dq0,dql0,dqi0,paprs,'LW',abortphy,flag_inhib_tend,itap,0 & #ifdef ISO & ,dxt0,dxtl0,dxti0 & #endif & ) CALL prt_enerbil('LW',itap) ! IF (mydebug) THEN CALL writefield_phy('u_seri',u_seri,nbp_lev) CALL writefield_phy('v_seri',v_seri,nbp_lev) CALL writefield_phy('t_seri',t_seri,nbp_lev) CALL writefield_phy('q_seri',q_seri,nbp_lev) ENDIF ! Calculer l'hydrologie de la surface ! ! CALL hydrol(dtime,pctsrf,rain_fall, snow_fall, zxevap, ! . agesno, ftsol,fqsurf,fsnow, ruis) ! ! ! Calculer le bilan du sol et la derive de temperature (couplage) ! DO i = 1, klon ! bils(i) = radsol(i) - sens(i) - evap(i)*RLVTT ! a la demande de JLD bils(i) = radsol(i) - sens(i) + zxfluxlat(i) ENDDO ! !moddeblott(jan95) ! Appeler le programme de parametrisation de l'orographie ! a l'echelle sous-maille: ! IF (prt_level .GE.10) THEN print *,' call orography ? ', ok_orodr ENDIF ! IF (ok_orodr) THEN ! ! selection des points pour lesquels le shema est actif: igwd=0 DO i=1,klon itest(i)=0 ! IF ((zstd(i).gt.10.0)) THEN IF (((zpic(i)-zmea(i)).GT.100.).AND.(zstd(i).GT.10.0)) THEN itest(i)=1 igwd=igwd+1 idx(igwd)=i ENDIF ENDDO ! igwdim=MAX(1,igwd) ! IF (ok_strato) THEN CALL drag_noro_strato(0,klon,klev,phys_tstep,paprs,pplay, & zmea,zstd, zsig, zgam, zthe,zpic,zval, & igwd,idx,itest, & t_seri, u_seri, v_seri, & zulow, zvlow, zustrdr, zvstrdr, & d_t_oro, d_u_oro, d_v_oro) ELSE CALL drag_noro(klon,klev,phys_tstep,paprs,pplay, & zmea,zstd, zsig, zgam, zthe,zpic,zval, & igwd,idx,itest, & t_seri, u_seri, v_seri, & zulow, zvlow, zustrdr, zvstrdr, & d_t_oro, d_u_oro, d_v_oro) ENDIF ! ! ajout des tendances !----------------------------------------------------------------------- ! ajout des tendances de la trainee de l'orographie CALL add_phys_tend(d_u_oro,d_v_oro,d_t_oro,dq0,dql0,dqi0,paprs,'oro', & abortphy,flag_inhib_tend,itap,0 & #ifdef ISO & ,dxt0,dxtl0,dxti0 & #endif & ) CALL prt_enerbil('oro',itap) !---------------------------------------------------------------------- ! ENDIF ! fin de test sur ok_orodr ! IF (mydebug) THEN CALL writefield_phy('u_seri',u_seri,nbp_lev) CALL writefield_phy('v_seri',v_seri,nbp_lev) CALL writefield_phy('t_seri',t_seri,nbp_lev) CALL writefield_phy('q_seri',q_seri,nbp_lev) ENDIF IF (ok_orolf) THEN ! ! selection des points pour lesquels le shema est actif: igwd=0 DO i=1,klon itest(i)=0 IF ((zpic(i)-zmea(i)).GT.100.) THEN itest(i)=1 igwd=igwd+1 idx(igwd)=i ENDIF ENDDO ! igwdim=MAX(1,igwd) ! IF (ok_strato) THEN CALL lift_noro_strato(klon,klev,phys_tstep,paprs,pplay, & latitude_deg,zmea,zstd,zpic,zgam,zthe,zpic,zval, & igwd,idx,itest, & t_seri, u_seri, v_seri, & zulow, zvlow, zustrli, zvstrli, & d_t_lif, d_u_lif, d_v_lif ) ELSE CALL lift_noro(klon,klev,phys_tstep,paprs,pplay, & latitude_deg,zmea,zstd,zpic, & itest, & t_seri, u_seri, v_seri, & zulow, zvlow, zustrli, zvstrli, & d_t_lif, d_u_lif, d_v_lif) ENDIF ! ajout des tendances de la portance de l'orographie CALL add_phys_tend(d_u_lif, d_v_lif, d_t_lif, dq0, dql0, dqi0, paprs, & 'lif', abortphy,flag_inhib_tend,itap,0 & #ifdef ISO & ,dxt0,dxtl0,dxti0 & #endif & ) CALL prt_enerbil('lif',itap) ENDIF ! fin de test sur ok_orolf IF (ok_hines) then ! HINES GWD PARAMETRIZATION east_gwstress=0. west_gwstress=0. du_gwd_hines=0. dv_gwd_hines=0. CALL hines_gwd(klon, klev, phys_tstep, paprs, pplay, latitude_deg, t_seri, & u_seri, v_seri, zustr_gwd_hines, zvstr_gwd_hines, d_t_hin, & du_gwd_hines, dv_gwd_hines) zustr_gwd_hines=0. zvstr_gwd_hines=0. DO k = 1, klev zustr_gwd_hines(:)=zustr_gwd_hines(:)+ du_gwd_hines(:, k)/phys_tstep & * (paprs(:, k)-paprs(:, k+1))/rg zvstr_gwd_hines(:)=zvstr_gwd_hines(:)+ dv_gwd_hines(:, k)/phys_tstep & * (paprs(:, k)-paprs(:, k+1))/rg ENDDO d_t_hin(:, :)=0. CALL add_phys_tend(du_gwd_hines, dv_gwd_hines, d_t_hin, dq0, dql0, & dqi0, paprs, 'hin', abortphy,flag_inhib_tend,itap,0 & #ifdef ISO & ,dxt0,dxtl0,dxti0 & #endif & ) CALL prt_enerbil('hin',itap) ENDIF IF (.not. ok_hines .and. ok_gwd_rando) then ! ym missing init for east_gwstress & west_gwstress -> added in phys_local_var_mod CALL acama_GWD_rando(PHYS_TSTEP, pplay, latitude_deg, t_seri, u_seri, & v_seri, rot, zustr_gwd_front, zvstr_gwd_front, du_gwd_front, & dv_gwd_front, east_gwstress, west_gwstress) zustr_gwd_front=0. zvstr_gwd_front=0. DO k = 1, klev zustr_gwd_front(:)=zustr_gwd_front(:)+ du_gwd_front(:, k)/phys_tstep & * (paprs(:, k)-paprs(:, k+1))/rg zvstr_gwd_front(:)=zvstr_gwd_front(:)+ dv_gwd_front(:, k)/phys_tstep & * (paprs(:, k)-paprs(:, k+1))/rg ENDDO CALL add_phys_tend(du_gwd_front, dv_gwd_front, dt0, dq0, dql0, dqi0, & paprs, 'front_gwd_rando', abortphy,flag_inhib_tend,itap,0 & #ifdef ISO & ,dxt0,dxtl0,dxti0 & #endif & ) CALL prt_enerbil('front_gwd_rando',itap) ENDIF IF (ok_gwd_rando) THEN CALL FLOTT_GWD_rando(PHYS_TSTEP, pplay, t_seri, u_seri, v_seri, & rain_fall + snow_fall, zustr_gwd_rando, zvstr_gwd_rando, & du_gwd_rando, dv_gwd_rando, east_gwstress, west_gwstress) CALL add_phys_tend(du_gwd_rando, dv_gwd_rando, dt0, dq0, dql0, dqi0, & paprs, 'flott_gwd_rando', abortphy,flag_inhib_tend,itap,0 & #ifdef ISO & ,dxt0,dxtl0,dxti0 & #endif & ) CALL prt_enerbil('flott_gwd_rando',itap) zustr_gwd_rando=0. zvstr_gwd_rando=0. DO k = 1, klev zustr_gwd_rando(:)=zustr_gwd_rando(:)+ du_gwd_rando(:, k)/phys_tstep & * (paprs(:, k)-paprs(:, k+1))/rg zvstr_gwd_rando(:)=zvstr_gwd_rando(:)+ dv_gwd_rando(:, k)/phys_tstep & * (paprs(:, k)-paprs(:, k+1))/rg ENDDO ENDIF ! STRESS NECESSAIRES: TOUTE LA PHYSIQUE IF (mydebug) THEN CALL writefield_phy('u_seri',u_seri,nbp_lev) CALL writefield_phy('v_seri',v_seri,nbp_lev) CALL writefield_phy('t_seri',t_seri,nbp_lev) CALL writefield_phy('q_seri',q_seri,nbp_lev) ENDIF DO i = 1, klon zustrph(i)=0. zvstrph(i)=0. ENDDO DO k = 1, klev DO i = 1, klon zustrph(i)=zustrph(i)+(u_seri(i,k)-u(i,k))/phys_tstep* & (paprs(i,k)-paprs(i,k+1))/rg zvstrph(i)=zvstrph(i)+(v_seri(i,k)-v(i,k))/phys_tstep* & (paprs(i,k)-paprs(i,k+1))/rg ENDDO ENDDO ! !IM calcul composantes axiales du moment angulaire et couple des montagnes ! IF (is_sequential .and. ok_orodr) THEN CALL aaam_bud (27,klon,klev,jD_cur-jD_ref,jH_cur, & ra,rg,romega, & latitude_deg,longitude_deg,pphis, & zustrdr,zustrli,zustrph, & zvstrdr,zvstrli,zvstrph, & paprs,u,v, & aam, torsfc) ENDIF !IM cf. FLott END !DC Calcul de la tendance due au methane IF (ok_qch4) THEN CALL METHOX(1,klon,klon,klev,q_seri,d_q_ch4,pplay) ! ajout de la tendance d'humidite due au methane d_q_ch4_dtime(:,:) = d_q_ch4(:,:)*phys_tstep #ifdef ISO d_xt_ch4_dtime(:,:,:) = d_xt_ch4(:,:,:)*phys_tstep #endif CALL add_phys_tend(du0, dv0, dt0, d_q_ch4_dtime, dql0, dqi0, paprs, & 'q_ch4', abortphy,flag_inhib_tend,itap,0 & #ifdef ISO & ,d_xt_ch4_dtime,dxtl0,dxti0 & #endif & ) d_q_ch4(:,:) = d_q_ch4_dtime(:,:)/phys_tstep #ifdef ISO d_xt_ch4(:,:,:) = d_xt_ch4_dtime(:,:,:)/phys_tstep #endif ENDIF ! ! !=============================================================== ! Additional tendency of TKE due to orography !=============================================================== ! ! Inititialization !------------------ addtkeoro=0 CALL getin_p('addtkeoro',addtkeoro) IF (prt_level.ge.5) & print*,'addtkeoro', addtkeoro alphatkeoro=1. CALL getin_p('alphatkeoro',alphatkeoro) alphatkeoro=min(max(0.,alphatkeoro),1.) smallscales_tkeoro=.FALSE. CALL getin_p('smallscales_tkeoro',smallscales_tkeoro) dtadd(:,:)=0. duadd(:,:)=0. dvadd(:,:)=0. ! Choices for addtkeoro: ! ** 0 no TKE tendency from orography ! ** 1 we include a fraction alphatkeoro of the whole tendency duoro ! ** 2 we include a fraction alphatkeoro of the gravity wave part of duoro ! IF (addtkeoro .GT. 0 .AND. ok_orodr ) THEN ! ------------------------------------------- ! selection des points pour lesquels le schema est actif: IF (addtkeoro .EQ. 1 ) THEN duadd(:,:)=alphatkeoro*d_u_oro(:,:) dvadd(:,:)=alphatkeoro*d_v_oro(:,:) ELSE IF (addtkeoro .EQ. 2) THEN IF (smallscales_tkeoro) THEN igwd=0 DO i=1,klon itest(i)=0 ! Etienne: ici je prends en compte plus de relief que la routine drag_noro_strato ! car on peut s'attendre a ce que les petites echelles produisent aussi de la TKE ! Mais attention, cela ne va pas dans le sens de la conservation de l'energie! IF (zstd(i).GT.1.0) THEN itest(i)=1 igwd=igwd+1 idx(igwd)=i ENDIF ENDDO ELSE igwd=0 DO i=1,klon itest(i)=0 IF (((zpic(i)-zmea(i)).GT.100.).AND.(zstd(i).GT.10.0)) THEN itest(i)=1 igwd=igwd+1 idx(igwd)=i ENDIF ENDDO ENDIF CALL drag_noro_strato(addtkeoro,klon,klev,phys_tstep,paprs,pplay, & zmea,zstd, zsig, zgam, zthe,zpic,zval, & igwd,idx,itest, & t_seri, u_seri, v_seri, & zulow, zvlow, zustrdr, zvstrdr, & d_t_oro_gw, d_u_oro_gw, d_v_oro_gw) zustrdr(:)=0. zvstrdr(:)=0. zulow(:)=0. zvlow(:)=0. duadd(:,:)=alphatkeoro*d_u_oro_gw(:,:) dvadd(:,:)=alphatkeoro*d_v_oro_gw(:,:) ENDIF ! TKE update from subgrid temperature and wind tendencies !---------------------------------------------------------- forall (k=1: nbp_lev) exner(:, k) = (pplay(:, k)/paprs(:,1))**RKAPPA CALL tend_to_tke(pdtphys,paprs,exner,t_seri,u_seri,v_seri,dtadd,duadd,dvadd,pctsrf,pbl_tke) ! ! Prevent pbl_tke_w from becoming negative wake_delta_pbl_tke(:,:,:) = max(wake_delta_pbl_tke(:,:,:), -pbl_tke(:,:,:)) ! ENDIF ! ----- !=============================================================== #ifdef ISO #ifdef ISOVERIF if (iso_HDO.gt.0) then call iso_verif_aberrant_enc_vect2D( & & xt_seri,q_seri, & & 'physiq 5924, juste apres methox',ntraciso,klon,klev) endif if ((iso_HDO.gt.0).and.(iso_O18.gt.0)) then do i=1,klon do k=1,klev if (q_seri(i,k).gt.ridicule) then if (iso_verif_o18_aberrant_nostop( & & xt_seri(iso_HDO,i,k)/q_seri(i,k), & & xt_seri(iso_O18,i,k)/q_seri(i,k), & & 'physiq 5937, juste apres methox, qv').eq.1) then write(*,*) 'physic 2444: i,k,q_seri(i,k)=',i,k,q_seri(i,k) write(*,*) 'xt_seri(:,i,k)=',xt_seri(:,i,k) stop endif ! if (iso_verif_o18_aberrant_nostop endif !if (q_seri(i,k).gt.errmax) then if (ql_seri(i,k).gt.ridicule) then if (iso_verif_o18_aberrant_nostop( & & xtl_seri(iso_HDO,i,k)/ql_seri(i,k), & & xtl_seri(iso_O18,i,k)/ql_seri(i,k), & & 'physiq 5937, juste apres methox, ql').eq.1) then write(*,*) 'i,k,ql_seri(i,k)=',i,k,ql_seri(i,k) stop endif ! if (iso_verif_o18_aberrant_nostop endif !if (q_seri(i,k).gt.errmax) then if (qs_seri(i,k).gt.ridicule) then if (iso_verif_o18_aberrant_nostop( & & xts_seri(iso_HDO,i,k)/qs_seri(i,k), & & xts_seri(iso_O18,i,k)/qs_seri(i,k), & & 'physiq 5937, juste apres methox, qs').eq.1) then write(*,*) 'i,k,qs_seri(i,k)=',i,k,qs_seri(i,k) stop endif ! if (iso_verif_o18_aberrant_nostop endif !if (q_seri(i,k).gt.errmax) then enddo !k=1,klev enddo !i=1,klon endif !if ((iso_HDO.gt.0).and.(iso_O18.gt.0)) then #endif #endif !==================================================================== ! Interface Simulateur COSP (Calipso, ISCCP, MISR, ..) !==================================================================== ! Abderrahmane 24.08.09 IF (ok_cosp) THEN ! adeclarer #ifdef CPP_COSP IF (itap.eq.1.or.MOD(itap,NINT(freq_cosp/phys_tstep)).EQ.0) THEN IF (prt_level .GE.10) THEN print*,'freq_cosp',freq_cosp ENDIF mr_ozone=wo(:, :, 1) * dobson_u * 1e3 / zmasse ! print*,'Dans physiq.F avant appel cosp ref_liq,ref_ice=', ! s ref_liq,ref_ice CALL phys_cosp(itap,phys_tstep,freq_cosp, & ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, & ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, & klon,klev,longitude_deg,latitude_deg,presnivs,overlap, & JrNt,ref_liq,ref_ice, & pctsrf(:,is_ter)+pctsrf(:,is_lic), & zu10m,zv10m,pphis, & zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, & qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, & prfl(:,1:klev),psfl(:,1:klev), & pmflxr(:,1:klev),pmflxs(:,1:klev), & mr_ozone,cldtau, cldemi) ! L calipso2D,calipso3D,cfadlidar,parasolrefl,atb,betamol, ! L cfaddbze,clcalipso2,dbze,cltlidarradar, ! M clMISR, ! R clisccp2,boxtauisccp,boxptopisccp,tclisccp,ctpisccp, ! I tauisccp,albisccp,meantbisccp,meantbclrisccp) ENDIF #endif #ifdef CPP_COSP2 IF (itap.eq.1.or.MOD(itap,NINT(freq_cosp/phys_tstep)).EQ.0) THEN IF (prt_level .GE.10) THEN print*,'freq_cosp',freq_cosp ENDIF mr_ozone=wo(:, :, 1) * dobson_u * 1e3 / zmasse print*,'Dans physiq.F avant appel ' ! s ref_liq,ref_ice CALL phys_cosp2(itap,phys_tstep,freq_cosp, & ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, & ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, & klon,klev,longitude_deg,latitude_deg,presnivs,overlap, & JrNt,ref_liq,ref_ice, & pctsrf(:,is_ter)+pctsrf(:,is_lic), & zu10m,zv10m,pphis, & zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, & qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, & prfl(:,1:klev),psfl(:,1:klev), & pmflxr(:,1:klev),pmflxs(:,1:klev), & mr_ozone,cldtau, cldemi) ENDIF #endif #ifdef CPP_COSPV2 IF (itap.eq.1.or.MOD(itap,NINT(freq_cosp/phys_tstep)).EQ.0) THEN ! IF (MOD(itap,NINT(freq_cosp/phys_tstep)).EQ.0) THEN IF (prt_level .GE.10) THEN print*,'freq_cosp',freq_cosp ENDIF DO k = 1, klev DO i = 1, klon phicosp(i,k) = pphi(i,k) + pphis(i) ENDDO ENDDO mr_ozone=wo(:, :, 1) * dobson_u * 1e3 / zmasse print*,'Dans physiq.F avant appel ' ! s ref_liq,ref_ice CALL lmdz_cosp_interface(itap,phys_tstep,freq_cosp, & ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, & ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, & klon,klev,longitude_deg,latitude_deg,presnivs,overlap, & JrNt,ref_liq,ref_ice, & pctsrf(:,is_ter)+pctsrf(:,is_lic), & zu10m,zv10m,pphis, & zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, & qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, & prfl(:,1:klev),psfl(:,1:klev), & pmflxr(:,1:klev),pmflxs(:,1:klev), & mr_ozone,cldtau, cldemi) ENDIF #endif ENDIF !ok_cosp !c==================================================================== !c Ajout de la production de tritium (naturelle et essais nucléaires) !c==================================================================== !C #ifdef ISO #ifdef ISOVERIF call iso_verif_noNaN_vect2D(xt_seri, & & 'physiq 5595: avant appel tritium',ntraciso,klon,klev) #endif call iso_tritium(paprs,pplay, & & zphi,phys_tstep, & & d_xt_prod_nucl, & & d_xt_cosmo, & & d_xt_decroiss, & & xt_seri) #ifdef ISOVERIF call iso_verif_noNaN_vect2D(xt_seri, & & 'physiq 5607: apres appel tritium',ntraciso,klon,klev) if (iso_HTO.gt.0) then ! Tritium ixt=iso_HTO do i=1,klon do k=1,klev if (iso_verif_positif_strict_nostop(xt_seri(ixt,i,k), & & 'physiq 5620 : xt_seri(HTO) nul ou negatif').eq.1) then write(*,*) 'ixt,i,klon,k,klev=',ixt,i,klon,k,klev write(*,*) 'xt_seri(iso_HTO,i,k)=',xt_seri(ixt,i,k) stop endif enddo enddo endif #endif ! write(*,*)'itap=',itap ! write(*,*)'itau_phy=',itau_phy ! write(*,*)'jD_cur=',jD_cur #endif !ifdef ISO ! Marine IF (ok_airs) then IF (itap.eq.1.or.MOD(itap,NINT(freq_airs/phys_tstep)).EQ.0) THEN write(*,*) 'je vais appeler simu_airs, ok_airs, freq_airs=', ok_airs, freq_airs CALL simu_airs(itap,rneb, t_seri, cldemi, fiwc, ref_ice, pphi, pplay, paprs,& & map_prop_hc,map_prop_hist,& & map_emis_hc,map_iwp_hc,map_deltaz_hc,map_pcld_hc,map_tcld_hc,& & map_emis_Cb,map_pcld_Cb,map_tcld_Cb,& & map_emis_ThCi,map_pcld_ThCi,map_tcld_ThCi,& & map_emis_Anv,map_pcld_Anv,map_tcld_Anv,& & map_emis_hist,map_iwp_hist,map_deltaz_hist,map_rad_hist,& & map_ntot,map_hc,map_hist,& & map_Cb,map_ThCi,map_Anv,& & alt_tropo ) ENDIF ENDIF ! ok_airs ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !AA !AA Installation de l'interface online-offline pour traceurs !AA !==================================================================== ! Calcul des tendances traceurs !==================================================================== ! IF (type_trac=='repr') THEN !MM pas d'impact, car on recupere q_seri,tr_seri,t_seri via phys_local_var_mod !MM dans Reprobus sh_in(:,:) = q_seri(:,:) #ifdef REPROBUS d_q_rep(:,:) = 0. d_ql_rep(:,:) = 0. d_qi_rep(:,:) = 0. #endif ELSE sh_in(:,:) = qx(:,:,ivap) IF (nqo .EQ. 3) THEN ch_in(:,:) = qx(:,:,iliq) + qx(:,:,isol) ELSE ch_in(:,:) = qx(:,:,iliq) ENDIF ENDIF #ifdef CPP_Dust ! Avec SPLA, iflag_phytrac est forcé =1 CALL phytracr_spl ( debut,lafin , jD_cur,jH_cur,iflag_con, & ! I pdtphys,ftsol, & ! I t,q_seri,paprs,pplay,RHcl, & ! I pmfu, pmfd, pen_u, pde_u, pen_d, pde_d, & ! I coefh(1:klon,1:klev,is_ave), cdragh, cdragm, u1, v1, & ! I u_seri, v_seri, latitude_deg, longitude_deg, & pphis,pctsrf,pmflxr,pmflxs,prfl,psfl, & ! I da,phi,phi2,d1a,dam,mp,ep,sigd,sij,clw,elij, & ! I epmlmMm,eplaMm,upwd,dnwd,itop_con,ibas_con, & ! I ev,wdtrainA, wdtrainM,wght_cvfd, & ! I fm_therm, entr_therm, rneb, & ! I beta_prec_fisrt,beta_prec, & !I zu10m,zv10m,wstar,ale_bl,ale_wake, & ! I d_tr_dyn,tr_seri) #else IF (iflag_phytrac == 1 ) THEN CALL phytrac ( & itap, days_elapsed+1, jH_cur, debut, & lafin, phys_tstep, u, v, t, & paprs, pplay, pmfu, pmfd, & pen_u, pde_u, pen_d, pde_d, & cdragh, coefh(1:klon,1:klev,is_ave), fm_therm, entr_therm, & u1, v1, ftsol, pctsrf, & zustar, zu10m, zv10m, & wstar(:,is_ave), ale_bl, ale_wake, & latitude_deg, longitude_deg, & frac_impa,frac_nucl, beta_prec_fisrt,beta_prec, & presnivs, pphis, pphi, albsol1, & sh_in, ch_in, rhcl, cldfra, rneb, & diafra, cldliq, itop_con, ibas_con, & pmflxr, pmflxs, prfl, psfl, & da, phi, mp, upwd, & phi2, d1a, dam, sij, wght_cvfd, & !<jyg write(lunout,*) 'd_ps ',d_ps(igout) write(lunout,*) 'd_u, d_v, d_t, d_qx1, d_qx2 ' DO k=1,klev write(lunout,*) d_u(igout,k),d_v(igout,k),d_t(igout,k), & d_qx(igout,k,1),d_qx(igout,k,2) ENDDO ENDIF !============================================================ ! Calcul de la temperature potentielle !============================================================ DO k = 1, klev DO i = 1, klon !JYG/IM theta en debut du pas de temps !JYG/IM theta(i,k)=t(i,k)*(100000./pplay(i,k))**(RD/RCPD) !JYG/IM theta en fin de pas de temps de physique theta(i,k)=t_seri(i,k)*(100000./pplay(i,k))**(RD/RCPD) ! thetal: 2 lignes suivantes a decommenter si vous avez les fichiers ! MPL 20130625 ! fth_fonctions.F90 et parkind1.F90 ! sinon thetal=theta ! thetal(i,k)=fth_thetal(pplay(i,k),t_seri(i,k),q_seri(i,k), ! : ql_seri(i,k)) thetal(i,k)=theta(i,k) ENDDO ENDDO ! ! 22.03.04 BEG !============================================================= ! Ecriture des sorties !============================================================= #ifdef CPP_IOIPSL ! Recupere des varibles calcule dans differents modules ! pour ecriture dans histxxx.nc ! Get some variables from module fonte_neige_mod CALL fonte_neige_get_vars(pctsrf, & zxfqcalving, zxfqfonte, zxffonte, zxrunofflic & #ifdef ISO & ,zxfxtcalving, zxfxtfonte,zxxtrunofflic & #endif & ) !============================================================= ! Separation entre thermiques et non thermiques dans les sorties ! de fisrtilp !============================================================= IF (iflag_thermals>=1) THEN d_t_lscth=0. d_t_lscst=0. d_q_lscth=0. d_q_lscst=0. DO k=1,klev DO i=1,klon IF (ptconvth(i,k)) THEN d_t_lscth(i,k)=d_t_eva(i,k)+d_t_lsc(i,k) d_q_lscth(i,k)=d_q_eva(i,k)+d_q_lsc(i,k) ELSE d_t_lscst(i,k)=d_t_eva(i,k)+d_t_lsc(i,k) d_q_lscst(i,k)=d_q_eva(i,k)+d_q_lsc(i,k) ENDIF ENDDO ENDDO DO i=1,klon plul_st(i)=prfl(i,lmax_th(i)+1)+psfl(i,lmax_th(i)+1) plul_th(i)=prfl(i,1)+psfl(i,1) ENDDO ENDIF !On effectue les sorties: #ifdef CPP_Dust CALL phys_output_write_spl(itap, pdtphys, paprs, pphis, & pplay, lmax_th, aerosol_couple, & ok_ade, ok_aie, ivap, ok_sync, & ptconv, read_climoz, clevSTD, & ptconvth, d_t, qx, d_qx, d_tr_dyn, zmasse, & flag_aerosol, flag_aerosol_strat, ok_cdnc) #else CALL phys_output_write(itap, pdtphys, paprs, pphis, & pplay, lmax_th, aerosol_couple, & ok_ade, ok_aie, ok_volcan, ivap, iliq, isol, & ok_sync, ptconv, read_climoz, clevSTD, & ptconvth, d_u, d_t, qx, d_qx, zmasse, & flag_aerosol, flag_aerosol_strat, ok_cdnc) #endif #ifndef CPP_XIOS CALL write_paramLMDZ_phy(itap,nid_ctesGCM,ok_sync) #endif #endif ! Pour XIOS : On remet des variables a .false. apres un premier appel IF (debut) THEN #ifdef CPP_XIOS swaero_diag=.FALSE. swaerofree_diag=.FALSE. dryaod_diag=.FALSE. ok_4xCO2atm= .FALSE. ! write (lunout,*)'ok_4xCO2atm= ',swaero_diag, swaerofree_diag, dryaod_diag, ok_4xCO2atm IF (is_master) THEN !--setting up swaero_diag to TRUE in XIOS case IF (xios_field_is_active("topswad").OR.xios_field_is_active("topswad0").OR. & xios_field_is_active("solswad").OR.xios_field_is_active("solswad0").OR. & xios_field_is_active("topswai").OR.xios_field_is_active("solswai").OR. & (iflag_rrtm==1.AND.(xios_field_is_active("toplwad").OR.xios_field_is_active("toplwad0").OR. & xios_field_is_active("sollwad").OR.xios_field_is_active("sollwad0")))) & !!!--for now these fields are not in the XML files so they are omitted !!! xios_field_is_active("toplwai").OR.xios_field_is_active("sollwai") !))) & swaero_diag=.TRUE. !--setting up swaerofree_diag to TRUE in XIOS case IF (xios_field_is_active("SWdnSFCcleanclr").OR.xios_field_is_active("SWupSFCcleanclr").OR. & xios_field_is_active("SWupTOAcleanclr").OR.xios_field_is_active("rsucsaf").OR. & xios_field_is_active("rsdcsaf") .OR. xios_field_is_active("LWdnSFCcleanclr").OR. & xios_field_is_active("LWupTOAcleanclr")) & swaerofree_diag=.TRUE. !--setting up dryaod_diag to TRUE in XIOS case DO naero = 1, naero_tot-1 IF (xios_field_is_active("dryod550_"//name_aero_tau(naero))) dryaod_diag=.TRUE. ENDDO ! !--setting up ok_4xCO2atm to TRUE in XIOS case IF (xios_field_is_active("rsut4co2").OR.xios_field_is_active("rlut4co2").OR. & xios_field_is_active("rsutcs4co2").OR.xios_field_is_active("rlutcs4co2").OR. & xios_field_is_active("rsu4co2").OR.xios_field_is_active("rsucs4co2").OR. & xios_field_is_active("rsd4co2").OR.xios_field_is_active("rsdcs4co2").OR. & xios_field_is_active("rlu4co2").OR.xios_field_is_active("rlucs4co2").OR. & xios_field_is_active("rld4co2").OR.xios_field_is_active("rldcs4co2")) & ok_4xCO2atm=.TRUE. ENDIF !$OMP BARRIER CALL bcast(swaero_diag) CALL bcast(swaerofree_diag) CALL bcast(dryaod_diag) CALL bcast(ok_4xCO2atm) ! write (lunout,*)'ok_4xCO2atm= ',swaero_diag, swaerofree_diag, dryaod_diag, ok_4xCO2atm #endif ENDIF !==================================================================== ! Arret du modele apres hgardfou en cas de detection d'un ! plantage par hgardfou !==================================================================== IF (abortphy==1) THEN abort_message ='Plantage hgardfou' CALL abort_physic (modname,abort_message,1) ENDIF ! 22.03.04 END ! !==================================================================== ! Si c'est la fin, il faut conserver l'etat de redemarrage !==================================================================== ! #ifdef ISO #ifdef ISOVERIF if (iso_HDO.gt.0) then call iso_verif_aberrant_enc_vect2D( & & xt_ancien,q_ancien, & & 'physiq 6577',ntraciso,klon,klev) endif write(*,*) 'physiq 3731: verif avant phyisoredem' do k=1,klev do i=1,klon if (iso_eau.gt.0) then call iso_verif_egalite_choix(xt_ancien(iso_eau,i,k), & & q_ancien(i,k),'physiq 3728: avant phyisoredem', & & errmax,errmaxrel) endif ! if (iso_eau.gt.0) then #ifdef ISOTRAC if (ok_isotrac) then call iso_verif_traceur(xt_ancien(1,i,k),'physiq 4802') endif !if (ok_isotrac) then #endif enddo enddo !do k=1,klev #endif #endif ! ISO IF (lafin) THEN itau_phy = itau_phy + itap CALL phyredem ("restartphy.nc") ! open(97,form="unformatted",file="finbin") ! write(97) u_seri,v_seri,t_seri,q_seri ! close(97) IF (is_omp_master) THEN IF (read_climoz >= 1) THEN IF (is_mpi_root) CALL nf95_close(ncid_climoz) DEALLOCATE(press_edg_climoz) ! pointer DEALLOCATE(press_cen_climoz) ! pointer ENDIF ENDIF #ifdef CPP_XIOS IF (is_omp_master) CALL xios_context_finalize #endif WRITE(lunout,*) ' physiq fin, nombre de steps ou cvpas = 1 : ', Ncvpaseq1 ENDIF ! first=.false. END SUBROUTINE physiq END MODULE physiq_mod