!$Id $ ! MODULE traclmdz_mod ! ! In this module all tracers specific to LMDZ are treated. This module is used ! only if running without any other chemestry model as INCA or REPROBUS. ! IMPLICIT NONE REAL,DIMENSION(:,:),ALLOCATABLE,SAVE :: masktr ! Masque reservoir de sol traceur !$OMP THREADPRIVATE(masktr) ! Masque de l'echange avec la surface (1 = reservoir) ou (possible >= 1 ) REAL,DIMENSION(:,:),ALLOCATABLE,SAVE :: fshtr ! Flux surfacique dans le reservoir de sol !$OMP THREADPRIVATE(fshtr) REAL,DIMENSION(:),ALLOCATABLE,SAVE :: hsoltr ! Epaisseur equivalente du reservoir de sol !$OMP THREADPRIVATE(hsoltr) ! !Radioelements: !-------------- ! REAL,DIMENSION(:),ALLOCATABLE,SAVE :: tautr ! Constante de decroissance radioactive !$OMP THREADPRIVATE(tautr) REAL,DIMENSION(:),ALLOCATABLE,SAVE :: vdeptr ! Vitesse de depot sec dans la couche Brownienne !$OMP THREADPRIVATE(vdeptr) REAL,DIMENSION(:),ALLOCATABLE,SAVE :: scavtr ! Coefficient de lessivage !$OMP THREADPRIVATE(scavtr) REAL,DIMENSION(:,:),ALLOCATABLE,SAVE :: srcbe ! Production du beryllium7 dans l atmosphere (U/s/kgA) !$OMP THREADPRIVATE(srcbe) LOGICAL,DIMENSION(:),ALLOCATABLE,SAVE :: radio ! radio(it) = true => decroisssance radioactive !$OMP THREADPRIVATE(radio) REAL,DIMENSION(:,:),ALLOCATABLE,SAVE :: trs ! Conc. radon ds le sol !$OMP THREADPRIVATE(trs) INTEGER,SAVE :: id_aga ! Identification number for tracer : Age of stratospheric air !$OMP THREADPRIVATE(id_aga) INTEGER,SAVE :: lev_1p5km ! Approximative vertical layer number at 1.5km above surface, used for calculation of the age of air. The result shouldn't be that sensible to the exactness of this value as long as it is in the lower troposphere. !$OMP THREADPRIVATE(lev_1p5km) INTEGER,SAVE :: id_rn, id_pb ! Identification number for tracer : radon (Rn222), lead (Pb210) !$OMP THREADPRIVATE(id_rn, id_pb) INTEGER,SAVE :: id_be ! Activation et position du traceur Be7 [ id_be=0 -> desactive ] !$OMP THREADPRIVATE(id_be) INTEGER,SAVE :: id_pcsat, id_pcocsat, id_pcq ! traceurs pseudo-vapeur CL qsat, qsat_oc, q !$OMP THREADPRIVATE(id_pcsat, id_pcocsat, id_pcq) INTEGER,SAVE :: id_pcs0, id_pcos0, id_pcq0 ! traceurs pseudo-vapeur CL qsat, qsat_oc, q ! ! qui ne sont pas transportes par la convection !$OMP THREADPRIVATE(id_pcs0, id_pcos0, id_pcq0) INTEGER, SAVE:: id_o3 !$OMP THREADPRIVATE(id_o3) ! index of ozone tracer with Cariolle parameterization ! 0 means no ozone tracer LOGICAL,SAVE :: rnpb=.FALSE. ! Presence du couple Rn222, Pb210 !$OMP THREADPRIVATE(rnpb) CONTAINS SUBROUTINE traclmdz_from_restart(trs_in) ! This subroutine initialize the module saved variable trs with values from restart file (startphy.nc). ! This subroutine is called from phyetat0 after the field trs_in has been read. USE dimphy USE infotrac_phy ! Input argument REAL,DIMENSION(klon,nbtr), INTENT(IN) :: trs_in ! Local variables INTEGER :: ierr ! Allocate restart variables trs ALLOCATE( trs(klon,nbtr), stat=ierr) IF (ierr /= 0) CALL abort_physic('traclmdz_from_restart', 'pb in allocation 1',1) ! Initialize trs with values read from restart file trs(:,:) = trs_in(:,:) END SUBROUTINE traclmdz_from_restart SUBROUTINE traclmdz_init(pctsrf, xlat, xlon, ftsol, tr_seri, t_seri, pplay, sh, pdtphys, aerosol, lessivage) ! This subroutine allocates and initialize module variables and control variables. ! Initialization of the tracers should be done here only for those not found in the restart file. USE dimphy USE infotrac_phy USE regr_pr_comb_coefoz_m, ONLY: alloc_coefoz USE press_coefoz_m, ONLY: press_coefoz USE mod_grid_phy_lmdz USE mod_phys_lmdz_para USE indice_sol_mod USE print_control_mod, ONLY: lunout ! Input variables REAL,DIMENSION(klon,nbsrf),INTENT(IN) :: pctsrf ! Pourcentage de sol f(nature du sol) REAL,DIMENSION(klon),INTENT(IN) :: xlat ! latitudes en degres pour chaque point REAL,DIMENSION(klon),INTENT(IN) :: xlon ! longitudes en degres pour chaque point REAL,DIMENSION(klon,nbsrf),INTENT(IN) :: ftsol ! Temperature du sol (surf)(Kelvin) REAL,DIMENSION(klon,klev,nbtr),INTENT(INOUT) :: tr_seri! Concentration Traceur [U/KgA] REAL,DIMENSION(klon,klev),INTENT(IN) :: t_seri ! Temperature REAL,DIMENSION(klon,klev),INTENT(IN) :: pplay ! pression pour le mileu de chaque couche (en Pa) REAL,DIMENSION(klon,klev),INTENT(IN) :: sh ! humidite specifique REAL,INTENT(IN) :: pdtphys ! Pas d'integration pour la physique (seconde) ! Output variables LOGICAL,DIMENSION(nbtr), INTENT(OUT) :: aerosol LOGICAL,INTENT(OUT) :: lessivage ! Local variables INTEGER :: ierr, it, iiq, i, k REAL, DIMENSION(klon_glo,klev) :: varglo ! variable temporaire sur la grille global REAL, DIMENSION(klev) :: mintmp, maxtmp LOGICAL :: zero ! RomP >>> profil initial Be7 integer ilesfil parameter (ilesfil=1) integer irr,kradio real beryllium(klon,klev) ! profil initial Pb210 integer ilesfil2 parameter (ilesfil2=1) integer irr2,kradio2 real plomb(klon,klev) !! RomP <<< ! -------------------------------------------- ! Allocation ! -------------------------------------------- ALLOCATE( scavtr(nbtr), stat=ierr) IF (ierr /= 0) CALL abort_physic('traclmdz_init', 'pb in allocation 9',1) scavtr(:)=1. ALLOCATE( radio(nbtr), stat=ierr) IF (ierr /= 0) CALL abort_physic('traclmdz_init', 'pb in allocation 11',1) radio(:) = .false. ! Par defaut pas decroissance radioactive ALLOCATE( masktr(klon,nbtr), stat=ierr) IF (ierr /= 0) CALL abort_physic('traclmdz_init', 'pb in allocation 2',1) ALLOCATE( fshtr(klon,nbtr), stat=ierr) IF (ierr /= 0) CALL abort_physic('traclmdz_init', 'pb in allocation 3',1) ALLOCATE( hsoltr(nbtr), stat=ierr) IF (ierr /= 0) CALL abort_physic('traclmdz_init', 'pb in allocation 4',1) ALLOCATE( tautr(nbtr), stat=ierr) IF (ierr /= 0) CALL abort_physic('traclmdz_init', 'pb in allocation 5',1) tautr(:) = 0. ALLOCATE( vdeptr(nbtr), stat=ierr) IF (ierr /= 0) CALL abort_physic('traclmdz_init', 'pb in allocation 6',1) vdeptr(:) = 0. lessivage = .TRUE. !!jyg(20130206) : le choix d activation du lessivage est fait dans phytrac avec iflag_lscav !! call getin('lessivage',lessivage) !! if(lessivage) then !! print*,'lessivage lsc ON' !! else !! print*,'lessivage lsc OFF' !! endif aerosol(:) = .FALSE. ! Tous les traceurs sont des gaz par defaut ! ! Recherche des traceurs connus : Be7, O3, CO2,... ! -------------------------------------------- id_rn=0; id_pb=0; id_aga=0; id_be=0; id_o3=0 id_pcsat=0; id_pcocsat=0; id_pcq=0; id_pcs0=0; id_pcos0=0; id_pcq0=0 DO it=1,nbtr !! iiq=niadv(it+2) ! jyg iiq=niadv(it+nqo) ! jyg IF ( tname(iiq) == "RN" ) THEN id_rn=it ! radon ELSE IF ( tname(iiq) == "PB") THEN id_pb=it ! plomb ! RomP >>> profil initial de PB210 open (ilesfil2,file='prof.pb210',status='old',iostat=irr2) IF (irr2 == 0) THEN read(ilesfil2,*) kradio2 print*,'number of levels for pb210 profile ',kradio2 do k=kradio2,1,-1 read (ilesfil2,*) plomb(:,k) enddo close(ilesfil2) do k=1,klev do i=1,klon tr_seri(i,k,id_pb)=plomb(i,k) !! print*, 'tr_seri',i,k,tr_seri(i,k,id_pb) enddo enddo ELSE print *, 'Prof.pb210 does not exist: use restart values' ENDIF ! RomP <<< ELSE IF ( tname(iiq) == "Aga" .OR. tname(iiq) == "AGA" ) THEN ! Age of stratospheric air id_aga=it radio(id_aga) = .FALSE. aerosol(id_aga) = .FALSE. pbl_flg(id_aga) = 0 ! Find the first model layer above 1.5km from the surface IF (klev>=30) THEN lev_1p5km=6 ! NB! This value is for klev=39 ELSE IF (klev>=10) THEN lev_1p5km=5 ! NB! This value is for klev=19 ELSE lev_1p5km=klev/2 END IF ELSE IF ( tname(iiq) == "BE" .OR. tname(iiq) == "Be" .OR. & tname(iiq) == "BE7" .OR. tname(iiq) == "Be7" ) THEN ! Recherche du Beryllium 7 id_be=it ALLOCATE( srcbe(klon,klev) ) radio(id_be) = .TRUE. aerosol(id_be) = .TRUE. ! le Be est un aerosol !jyg le 13/03/2013 ; ajout de pplay en argument de init_be !!! CALL init_be(pctsrf,masktr(:,id_be),tautr(id_be),vdeptr(id_be),scavtr(id_be),srcbe) CALL init_be(pctsrf,pplay,masktr(:,id_be),tautr(id_be),vdeptr(id_be),scavtr(id_be),srcbe) WRITE(lunout,*) 'Initialisation srcBe: OK' ! RomP >>> profil initial de Be7 open (ilesfil,file='prof.be7',status='old',iostat=irr) IF (irr == 0) THEN read(ilesfil,*) kradio print*,'number of levels for Be7 profile ',kradio do k=kradio,1,-1 read (ilesfil,*) beryllium(:,k) enddo close(ilesfil) do k=1,klev do i=1,klon tr_seri(i,k,id_be)=beryllium(i,k) !! print*, 'tr_seri',i,k,tr_seri(i,k,id_be) enddo enddo ELSE print *, 'Prof.Be7 does not exist: use restart values' ENDIF ! RomP <<< ELSE IF (tname(iiq)=="O3" .OR. tname(iiq)=="o3") THEN ! Recherche de l'ozone : parametrization de la chimie par Cariolle id_o3=it CALL alloc_coefoz ! allocate ozone coefficients CALL press_coefoz ! read input pressure levels ELSE IF ( tname(iiq) == "pcsat" .OR. tname(iiq) == "Pcsat" ) THEN id_pcsat=it ELSE IF ( tname(iiq) == "pcocsat" .OR. tname(iiq) == "Pcocsat" ) THEN id_pcocsat=it ELSE IF ( tname(iiq) == "pcq" .OR. tname(iiq) == "Pcq" ) THEN id_pcq=it ELSE IF ( tname(iiq) == "pcs0" .OR. tname(iiq) == "Pcs0" ) THEN id_pcs0=it conv_flg(it)=0 ! No transport by convection for this tracer ELSE IF ( tname(iiq) == "pcos0" .OR. tname(iiq) == "Pcos0" ) THEN id_pcos0=it conv_flg(it)=0 ! No transport by convection for this tracer ELSE IF ( tname(iiq) == "pcq0" .OR. tname(iiq) == "Pcq0" ) THEN id_pcq0=it conv_flg(it)=0 ! No transport by convection for this tracer ELSE WRITE(lunout,*) 'This is an unknown tracer in LMDZ : ', trim(tname(iiq)) END IF END DO ! ! Valeurs specifiques pour les traceurs Rn222 et Pb210 ! ---------------------------------------------- IF ( id_rn/=0 .AND. id_pb/=0 ) THEN rnpb = .TRUE. radio(id_rn)= .TRUE. radio(id_pb)= .TRUE. pbl_flg(id_rn) = 0 ! au lieu de clsol=true ! CL au sol calcule pbl_flg(id_pb) = 0 ! au lieu de clsol=true aerosol(id_rn) = .FALSE. aerosol(id_pb) = .TRUE. ! le Pb est un aerosol CALL initrrnpb (ftsol,pctsrf,masktr,fshtr,hsoltr,tautr,vdeptr,scavtr) END IF ! ! Check if all tracers have restart values ! ---------------------------------------------- DO it=1,nbtr !! iiq=niadv(it+2) ! jyg iiq=niadv(it+nqo) ! jyg ! Test if tracer is zero everywhere. ! Done by master process MPI and master thread OpenMP CALL gather(tr_seri(:,:,it),varglo) IF (is_mpi_root .AND. is_omp_root) THEN mintmp=MINVAL(varglo,dim=1) maxtmp=MAXVAL(varglo,dim=1) IF (MINVAL(mintmp,dim=1)==0. .AND. MAXVAL(maxtmp,dim=1)==0.) THEN ! Tracer is zero everywhere zero=.TRUE. ELSE zero=.FALSE. END IF END IF ! Distribute variable at all processes CALL bcast(zero) ! Initalize tracer that was not found in restart file. IF (zero) THEN ! The tracer was not found in restart file or it was equal zero everywhere. WRITE(lunout,*) "The tracer ",trim(tname(iiq))," will be initialized" IF (it==id_pcsat .OR. it==id_pcq .OR. & it==id_pcs0 .OR. it==id_pcq0) THEN tr_seri(:,:,it) = 100. ELSE IF (it==id_pcocsat .OR. it==id_pcos0) THEN DO i = 1, klon IF ( pctsrf (i, is_oce) == 0. ) THEN tr_seri(i,:,it) = 0. ELSE tr_seri(i,:,it) = 100. END IF END DO ELSE ! No specific initialization exist for this tracer tr_seri(:,:,it) = 0. END IF END IF END DO END SUBROUTINE traclmdz_init SUBROUTINE traclmdz(nstep, julien, gmtime, pdtphys, t_seri, paprs, pplay, & cdragh, coefh, yu1, yv1, ftsol, pctsrf, xlat, xlon, couchelimite, sh, & rh, pphi, ustar, wstar, ale_bl, ale_wake, zu10m, zv10m, & tr_seri, source, d_tr_cl,d_tr_dec, zmasse) !RomP USE dimphy USE infotrac_phy USE regr_pr_comb_coefoz_m, ONLY: regr_pr_comb_coefoz USE o3_chem_m, ONLY: o3_chem USE indice_sol_mod INCLUDE "YOMCST.h" !========================================================================== ! -- DESCRIPTION DES ARGUMENTS -- !========================================================================== ! Input arguments ! !Configuration grille,temps: INTEGER,INTENT(IN) :: nstep ! nombre d'appels de la physiq INTEGER,INTENT(IN) :: julien ! Jour julien REAL,INTENT(IN) :: gmtime REAL,INTENT(IN) :: pdtphys ! Pas d'integration pour la physique (seconde) REAL,DIMENSION(klon),INTENT(IN) :: xlat ! latitudes pour chaque point REAL, INTENT(IN):: xlon(:) ! dim(klon) longitude ! !Physique: !-------- REAL,DIMENSION(klon,klev),INTENT(IN) :: t_seri ! Temperature REAL,DIMENSION(klon,klev+1),INTENT(IN) :: paprs ! pression pour chaque inter-couche (en Pa) REAL,DIMENSION(klon,klev),INTENT(IN) :: pplay ! pression pour le mileu de chaque couche (en Pa) REAL,intent(in):: zmasse (:, :) ! dim(klon,klev) density of air, in kg/m2 !Couche limite: !-------------- ! REAL,DIMENSION(klon),INTENT(IN) :: cdragh ! coeff drag pour T et Q REAL,DIMENSION(klon,klev),INTENT(IN) :: coefh ! coeff melange CL (m**2/s) REAL,DIMENSION(klon),INTENT(IN) :: yu1 ! vents au premier niveau REAL,DIMENSION(klon),INTENT(IN) :: yv1 ! vents au premier niveau LOGICAL,INTENT(IN) :: couchelimite REAL,DIMENSION(klon,klev),INTENT(IN) :: sh ! humidite specifique REAL,DIMENSION(klon,klev),INTENT(IN) :: rh ! Humidite relative REAL,DIMENSION(klon,klev),INTENT(IN) :: pphi ! geopotentie REAL,DIMENSION(klon),INTENT(IN) :: ustar ! ustar (m/s) REAL,DIMENSION(klon),INTENT(IN) :: wstar,ale_bl,ale_wake ! wstar (m/s) and Avail. Lifti. Energ. REAL,DIMENSION(klon),INTENT(IN) :: zu10m ! vent zonal 10m (m/s) REAL,DIMENSION(klon),INTENT(IN) :: zv10m ! vent zonal 10m (m/s) ! Arguments necessaires pour les sources et puits de traceur: REAL,DIMENSION(klon,nbsrf),INTENT(IN) :: ftsol ! Temperature du sol (surf)(Kelvin) REAL,DIMENSION(klon,nbsrf),INTENT(IN) :: pctsrf ! Pourcentage de sol f(nature du sol) ! InOutput argument REAL,DIMENSION(klon,klev,nbtr),INTENT(INOUT) :: tr_seri ! Concentration Traceur [U/KgA] ! Output argument REAL,DIMENSION(klon,nbtr), INTENT(OUT) :: source ! a voir lorsque le flux de surface est prescrit REAL,DIMENSION(klon,klev,nbtr), INTENT(OUT) :: d_tr_cl ! Td couche limite/traceur !======================================================================================= ! -- VARIABLES LOCALES TRACEURS -- !======================================================================================= INTEGER :: i, k, it INTEGER :: lmt_pas ! number of time steps of "physics" per day REAL,DIMENSION(klon) :: d_trs ! Td dans le reservoir REAL,DIMENSION(klon,klev) :: qsat ! pression de la vapeur a saturation REAL,DIMENSION(klon,klev,nbtr) :: d_tr_dec ! Td radioactive REAL :: zrho ! Masse Volumique de l'air KgA/m3 REAL :: amn, amx ! !================================================================= ! Ajout de la production en Be7 (Beryllium) srcbe U/s/kgA !================================================================= ! IF ( id_be /= 0 ) THEN DO k = 1, klev DO i = 1, klon tr_seri(i,k,id_be) = tr_seri(i,k,id_be)+srcbe(i,k)*pdtphys END DO END DO WRITE(*,*) 'Ajout srcBe dans tr_seri: OK' END IF !================================================================= ! Update pseudo-vapor tracers !================================================================= CALL q_sat(klon*klev,t_seri,pplay,qsat) IF ( id_pcsat /= 0 ) THEN DO k = 1, klev DO i = 1, klon IF ( pplay(i,k).GE.85000.) THEN tr_seri(i,k,id_pcsat) = qsat(i,k) ELSE tr_seri(i,k,id_pcsat) = MIN (qsat(i,k), tr_seri(i,k,id_pcsat)) END IF END DO END DO END IF IF ( id_pcocsat /= 0 ) THEN DO k = 1, klev DO i = 1, klon IF ( pplay(i,k).GE.85000.) THEN IF ( pctsrf (i, is_oce) > 0. ) THEN tr_seri(i,k,id_pcocsat) = qsat(i,k) ELSE tr_seri(i,k,id_pcocsat) = 0. END IF ELSE tr_seri(i,k,id_pcocsat) = MIN (qsat(i,k), tr_seri(i,k,id_pcocsat)) END IF END DO END DO END IF IF ( id_pcq /= 0 ) THEN DO k = 1, klev DO i = 1, klon IF ( pplay(i,k).GE.85000.) THEN tr_seri(i,k,id_pcq) = sh(i,k) ELSE tr_seri(i,k,id_pcq) = MIN (qsat(i,k), tr_seri(i,k,id_pcq)) END IF END DO END DO END IF IF ( id_pcs0 /= 0 ) THEN DO k = 1, klev DO i = 1, klon IF ( pplay(i,k).GE.85000.) THEN tr_seri(i,k,id_pcs0) = qsat(i,k) ELSE tr_seri(i,k,id_pcs0) = MIN (qsat(i,k), tr_seri(i,k,id_pcs0)) END IF END DO END DO END IF IF ( id_pcos0 /= 0 ) THEN DO k = 1, klev DO i = 1, klon IF ( pplay(i,k).GE.85000.) THEN IF ( pctsrf (i, is_oce) > 0. ) THEN tr_seri(i,k,id_pcos0) = qsat(i,k) ELSE tr_seri(i,k,id_pcos0) = 0. END IF ELSE tr_seri(i,k,id_pcos0) = MIN (qsat(i,k), tr_seri(i,k,id_pcos0)) END IF END DO END DO END IF IF ( id_pcq0 /= 0 ) THEN DO k = 1, klev DO i = 1, klon IF ( pplay(i,k).GE.85000.) THEN tr_seri(i,k,id_pcq0) = sh(i,k) ELSE tr_seri(i,k,id_pcq0) = MIN (qsat(i,k), tr_seri(i,k,id_pcq0)) END IF END DO END DO END IF !================================================================= ! Update tracer : Age of stratospheric air !================================================================= IF (id_aga/=0) THEN ! Bottom layers DO k = 1, lev_1p5km tr_seri(:,k,id_aga) = 0.0 END DO ! Layers above 1.5km DO k = lev_1p5km+1,klev-1 tr_seri(:,k,id_aga) = tr_seri(:,k,id_aga) + pdtphys END DO ! Top layer tr_seri(:,klev,id_aga) = tr_seri(:,klev-1,id_aga) END IF !====================================================================== ! -- Calcul de l'effet de la couche limite -- !====================================================================== IF (couchelimite) THEN source(:,:) = 0.0 IF (id_be /=0) THEN DO i=1, klon zrho = pplay(i,1)/t_seri(i,1)/RD source(i,id_be) = - vdeptr(id_be)*tr_seri(i,1,id_be)*zrho END DO END IF END IF DO it=1, nbtr IF (couchelimite .AND. pbl_flg(it) == 0 .AND. (it==id_rn .OR. it==id_pb)) THEN ! couche limite avec quantite dans le sol calculee CALL cltracrn(it, pdtphys, yu1, yv1, & cdragh, coefh,t_seri,ftsol,pctsrf, & tr_seri(:,:,it),trs(:,it), & paprs, pplay, zmasse * rg, & masktr(:,it),fshtr(:,it),hsoltr(it),& tautr(it),vdeptr(it), & xlat,d_tr_cl(:,:,it),d_trs) DO k = 1, klev DO i = 1, klon tr_seri(i,k,it) = tr_seri(i,k,it) + d_tr_cl(i,k,it) END DO END DO ! Traceur dans le reservoir sol DO i = 1, klon trs(i,it) = trs(i,it) + d_trs(i) END DO END IF END DO !====================================================================== ! Calcul de l'effet du puits radioactif !====================================================================== CALL radio_decay (radio,rnpb,pdtphys,tautr,tr_seri,d_tr_dec) DO it=1,nbtr WRITE(solsym(it),'(i2)') it END DO DO it=1,nbtr IF(radio(it)) then DO k = 1, klev DO i = 1, klon tr_seri(i,k,it) = tr_seri(i,k,it) + d_tr_dec(i,k,it) END DO END DO CALL minmaxqfi(tr_seri(:,:,it),0.,1.e33,'puits rn it='//solsym(it)) END IF END DO !====================================================================== ! Parameterization of ozone chemistry !====================================================================== IF (id_o3 /= 0) then lmt_pas = NINT(86400./pdtphys) IF (MOD(nstep - 1, lmt_pas) == 0) THEN ! Once per day, update the coefficients for ozone chemistry: CALL regr_pr_comb_coefoz(julien, xlat, paprs, pplay) END IF CALL o3_chem(julien, gmtime, t_seri, zmasse, pdtphys, xlat, & xlon, tr_seri(:, :, id_o3)) END IF END SUBROUTINE traclmdz SUBROUTINE traclmdz_to_restart(trs_out) ! This subroutine is called from phyredem.F where the module ! variable trs is written to restart file (restartphy.nc) USE dimphy USE infotrac_phy REAL,DIMENSION(klon,nbtr), INTENT(OUT) :: trs_out INTEGER :: ierr IF ( ALLOCATED(trs) ) THEN trs_out(:,:) = trs(:,:) ELSE ! No previous allocate of trs. This is the case for create_etat0_limit. trs_out(:,:) = 0.0 END IF END SUBROUTINE traclmdz_to_restart END MODULE traclmdz_mod