! ! $Id: ocean_forced_mod.F90 3327 2018-05-16 13:58:59Z jbmadeleine $ ! MODULE ocean_forced_mod ! ! This module is used for both the sub-surfaces ocean and sea-ice for the case of a ! forced ocean, "ocean=force". ! IMPLICIT NONE CONTAINS ! !**************************************************************************************** ! SUBROUTINE ocean_forced_noice( & itime, dtime, jour, knon, knindex, & p1lay, cdragh, cdragq, cdragm, precip_rain, precip_snow, & temp_air, spechum, & AcoefH, AcoefQ, BcoefH, BcoefQ, & AcoefU, AcoefV, BcoefU, BcoefV, & ps, u1, v1, gustiness, & radsol, snow, agesno, & qsurf, evap, fluxsens, fluxlat, flux_u1, flux_v1, & tsurf_new, dflux_s, dflux_l) ! ! This subroutine treats the "open ocean", all grid points that are not entierly covered ! by ice. ! The routine receives data from climatologie file limit.nc and does some calculations at the ! surface. ! USE dimphy USE calcul_fluxs_mod USE limit_read_mod USE mod_grid_phy_lmdz USE indice_sol_mod USE phys_output_var_mod, ONLY : sens_prec_liq_o, sens_prec_sol_o, lat_prec_liq_o, lat_prec_sol_o INCLUDE "YOMCST.h" INCLUDE "clesphys.h" ! Input arguments !**************************************************************************************** INTEGER, INTENT(IN) :: itime, jour, knon INTEGER, DIMENSION(klon), INTENT(IN) :: knindex REAL, INTENT(IN) :: dtime REAL, DIMENSION(klon), INTENT(IN) :: p1lay REAL, DIMENSION(klon), INTENT(IN) :: cdragh, cdragq, cdragm REAL, DIMENSION(klon), INTENT(IN) :: precip_rain, precip_snow REAL, DIMENSION(klon), INTENT(IN) :: temp_air, spechum REAL, DIMENSION(klon), INTENT(IN) :: AcoefH, AcoefQ, BcoefH, BcoefQ REAL, DIMENSION(klon), INTENT(IN) :: AcoefU, AcoefV, BcoefU, BcoefV REAL, DIMENSION(klon), INTENT(IN) :: ps REAL, DIMENSION(klon), INTENT(IN) :: u1, v1, gustiness ! In/Output arguments !**************************************************************************************** REAL, DIMENSION(klon), INTENT(INOUT) :: radsol REAL, DIMENSION(klon), INTENT(INOUT) :: snow REAL, DIMENSION(klon), INTENT(INOUT) :: agesno !? put to 0 in ocean ! Output arguments !**************************************************************************************** REAL, DIMENSION(klon), INTENT(OUT) :: qsurf REAL, DIMENSION(klon), INTENT(OUT) :: evap, fluxsens, fluxlat REAL, DIMENSION(klon), INTENT(OUT) :: flux_u1, flux_v1 REAL, DIMENSION(klon), INTENT(OUT) :: tsurf_new REAL, DIMENSION(klon), INTENT(OUT) :: dflux_s, dflux_l ! Local variables !**************************************************************************************** INTEGER :: i, j REAL, DIMENSION(klon) :: cal, beta, dif_grnd REAL, DIMENSION(klon) :: alb_neig, tsurf_lim, zx_sl REAL, DIMENSION(klon) :: u0, v0 REAL, DIMENSION(klon) :: u1_lay, v1_lay LOGICAL :: check=.FALSE. REAL, DIMENSION(klon) :: sens_prec_liq, sens_prec_sol REAL, DIMENSION(klon) :: lat_prec_liq, lat_prec_sol !**************************************************************************************** ! Start calculation !**************************************************************************************** IF (check) WRITE(*,*)' Entering ocean_forced_noice' !**************************************************************************************** ! 1) ! Read sea-surface temperature from file limit.nc ! !**************************************************************************************** !--sb: !!jyg if (knon.eq.1) then ! single-column model if (klon_glo.eq.1) then ! single-column model CALL read_tsurf1d(knon,tsurf_lim) ! new else ! GCM CALL limit_read_sst(knon,knindex,tsurf_lim) endif ! knon !sb-- !**************************************************************************************** ! 2) ! Flux calculation ! !**************************************************************************************** ! Set some variables for calcul_fluxs cal = 0. beta = 1. dif_grnd = 0. alb_neig(:) = 0. agesno(:) = 0. sens_prec_liq = 0.; sens_prec_sol = 0.; lat_prec_liq = 0.; lat_prec_sol = 0. ! Suppose zero surface speed u0(:)=0.0 v0(:)=0.0 u1_lay(:) = u1(:) - u0(:) v1_lay(:) = v1(:) - v0(:) ! Calcul de tsurf_new, evap, fluxlat, fluxsens, dflux_s, dflux_l and qsurf CALL calcul_fluxs(knon, is_oce, dtime, & tsurf_lim, p1lay, cal, beta, cdragh, cdragq, ps, & precip_rain, precip_snow, snow, qsurf, & radsol, dif_grnd, temp_air, spechum, u1_lay, v1_lay, gustiness, & f_qsat_oce,AcoefH, AcoefQ, BcoefH, BcoefQ, & tsurf_new, evap, fluxlat, fluxsens, dflux_s, dflux_l, & sens_prec_liq, sens_prec_sol, lat_prec_liq, lat_prec_sol) do j = 1, knon i = knindex(j) sens_prec_liq_o(i,1) = sens_prec_liq(j) sens_prec_sol_o(i,1) = sens_prec_sol(j) lat_prec_liq_o(i,1) = lat_prec_liq(j) lat_prec_sol_o(i,1) = lat_prec_sol(j) enddo ! - Flux calculation at first modele level for U and V CALL calcul_flux_wind(knon, dtime, & u0, v0, u1, v1, gustiness, cdragm, & AcoefU, AcoefV, BcoefU, BcoefV, & p1lay, temp_air, & flux_u1, flux_v1) END SUBROUTINE ocean_forced_noice ! !*************************************************************************************** ! SUBROUTINE ocean_forced_ice( & itime, dtime, jour, knon, knindex, & tsurf_in, p1lay, cdragh, cdragm, precip_rain, precip_snow, temp_air, spechum, & AcoefH, AcoefQ, BcoefH, BcoefQ, & AcoefU, AcoefV, BcoefU, BcoefV, & ps, u1, v1, gustiness, & radsol, snow, qsol, agesno, tsoil, & qsurf, alb1_new, alb2_new, evap, fluxsens, fluxlat, flux_u1, flux_v1, & tsurf_new, dflux_s, dflux_l) ! ! This subroutine treats the ocean where there is ice. ! The routine reads data from climatologie file and does flux calculations at the ! surface. ! USE dimphy USE calcul_fluxs_mod USE surface_data, ONLY : calice, calsno USE limit_read_mod USE fonte_neige_mod, ONLY : fonte_neige USE indice_sol_mod USE phys_output_var_mod, ONLY : sens_prec_liq_o, sens_prec_sol_o, lat_prec_liq_o, lat_prec_sol_o ! INCLUDE "indicesol.h" INCLUDE "dimsoil.h" INCLUDE "YOMCST.h" INCLUDE "clesphys.h" ! Input arguments !**************************************************************************************** INTEGER, INTENT(IN) :: itime, jour, knon INTEGER, DIMENSION(klon), INTENT(IN) :: knindex REAL, INTENT(IN) :: dtime REAL, DIMENSION(klon), INTENT(IN) :: tsurf_in REAL, DIMENSION(klon), INTENT(IN) :: p1lay REAL, DIMENSION(klon), INTENT(IN) :: cdragh, cdragm REAL, DIMENSION(klon), INTENT(IN) :: precip_rain, precip_snow REAL, DIMENSION(klon), INTENT(IN) :: temp_air, spechum REAL, DIMENSION(klon), INTENT(IN) :: AcoefH, AcoefQ, BcoefH, BcoefQ REAL, DIMENSION(klon), INTENT(IN) :: AcoefU, AcoefV, BcoefU, BcoefV REAL, DIMENSION(klon), INTENT(IN) :: ps REAL, DIMENSION(klon), INTENT(IN) :: u1, v1, gustiness ! In/Output arguments !**************************************************************************************** REAL, DIMENSION(klon), INTENT(INOUT) :: radsol REAL, DIMENSION(klon), INTENT(INOUT) :: snow, qsol REAL, DIMENSION(klon), INTENT(INOUT) :: agesno REAL, DIMENSION(klon, nsoilmx), INTENT(INOUT) :: tsoil ! Output arguments !**************************************************************************************** REAL, DIMENSION(klon), INTENT(OUT) :: qsurf REAL, DIMENSION(klon), INTENT(OUT) :: alb1_new ! new albedo in visible SW interval REAL, DIMENSION(klon), INTENT(OUT) :: alb2_new ! new albedo in near IR interval REAL, DIMENSION(klon), INTENT(OUT) :: evap, fluxsens, fluxlat REAL, DIMENSION(klon), INTENT(OUT) :: flux_u1, flux_v1 REAL, DIMENSION(klon), INTENT(OUT) :: tsurf_new REAL, DIMENSION(klon), INTENT(OUT) :: dflux_s, dflux_l ! Local variables !**************************************************************************************** LOGICAL :: check=.FALSE. INTEGER :: i, j REAL :: zfra REAL, PARAMETER :: t_grnd=271.35 REAL, DIMENSION(klon) :: cal, beta, dif_grnd, capsol REAL, DIMENSION(klon) :: alb_neig, tsurf_tmp REAL, DIMENSION(klon) :: soilcap, soilflux REAL, DIMENSION(klon) :: u0, v0 REAL, DIMENSION(klon) :: u1_lay, v1_lay REAL, DIMENSION(klon) :: sens_prec_liq, sens_prec_sol REAL, DIMENSION(klon) :: lat_prec_liq, lat_prec_sol !**************************************************************************************** ! Start calculation !**************************************************************************************** IF (check) WRITE(*,*)'Entering surface_seaice, knon=',knon !**************************************************************************************** ! 1) ! Flux calculation : tsurf_new, evap, fluxlat, fluxsens, flux_u1, flux_v1 ! dflux_s, dflux_l and qsurf !**************************************************************************************** tsurf_tmp(:) = tsurf_in(:) ! calculate the parameters cal, beta, capsol and dif_grnd CALL calbeta(dtime, is_sic, knon, snow, qsol, beta, capsol, dif_grnd) IF (soil_model) THEN ! update tsoil and calculate soilcap and soilflux CALL soil(dtime, is_sic, knon, snow, tsurf_tmp, tsoil,soilcap, soilflux) cal(1:knon) = RCPD / soilcap(1:knon) radsol(1:knon) = radsol(1:knon) + soilflux(1:knon) dif_grnd = 1.0 / tau_gl ELSE dif_grnd = 1.0 / tau_gl cal = RCPD * calice WHERE (snow > 0.0) cal = RCPD * calsno ENDIF beta = 1.0 sens_prec_liq = 0.; sens_prec_sol = 0.; lat_prec_liq = 0.; lat_prec_sol = 0. ! Suppose zero surface speed u0(:)=0.0 v0(:)=0.0 u1_lay(:) = u1(:) - u0(:) v1_lay(:) = v1(:) - v0(:) CALL calcul_fluxs(knon, is_sic, dtime, & tsurf_tmp, p1lay, cal, beta, cdragh, cdragh, ps, & precip_rain, precip_snow, snow, qsurf, & radsol, dif_grnd, temp_air, spechum, u1_lay, v1_lay, gustiness, & f_qsat_oce,AcoefH, AcoefQ, BcoefH, BcoefQ, & tsurf_new, evap, fluxlat, fluxsens, dflux_s, dflux_l, & sens_prec_liq, sens_prec_sol, lat_prec_liq, lat_prec_sol) do j = 1, knon i = knindex(j) sens_prec_liq_o(i,2) = sens_prec_liq(j) sens_prec_sol_o(i,2) = sens_prec_sol(j) lat_prec_liq_o(i,2) = lat_prec_liq(j) lat_prec_sol_o(i,2) = lat_prec_sol(j) enddo ! - Flux calculation at first modele level for U and V CALL calcul_flux_wind(knon, dtime, & u0, v0, u1, v1, gustiness, cdragm, & AcoefU, AcoefV, BcoefU, BcoefV, & p1lay, temp_air, & flux_u1, flux_v1) !**************************************************************************************** ! 2) ! Calculations due to snow and runoff ! !**************************************************************************************** CALL fonte_neige( knon, is_sic, knindex, dtime, & tsurf_tmp, precip_rain, precip_snow, & snow, qsol, tsurf_new, evap) ! Calculation of albedo at snow (alb_neig) and update the age of snow (agesno) ! CALL albsno(klon, knon, dtime, agesno(:), alb_neig(:), precip_snow(:)) WHERE (snow(1:knon) .LT. 0.0001) agesno(1:knon) = 0. alb1_new(:) = 0.0 DO i=1, knon zfra = MAX(0.0,MIN(1.0,snow(i)/(snow(i)+10.0))) alb1_new(i) = alb_neig(i) * zfra + 0.6 * (1.0-zfra) ENDDO alb2_new(:) = alb1_new(:) END SUBROUTINE ocean_forced_ice !************************************************************************ ! 1D case !************************************************************************ SUBROUTINE read_tsurf1d(knon,sst_out) ! This subroutine specifies the surface temperature to be used in 1D simulations USE dimphy, ONLY : klon INTEGER, INTENT(IN) :: knon ! nomber of points on compressed grid REAL, DIMENSION(klon), INTENT(OUT) :: sst_out ! tsurf used to force the single-column model INTEGER :: i ! COMMON defined in lmdz1d.F: real ts_cur common /sst_forcing/ts_cur DO i = 1, knon sst_out(i) = ts_cur ENDDO END SUBROUTINE read_tsurf1d ! !************************************************************************ ! END MODULE ocean_forced_mod