MODULE limit ! !******************************************************************************* ! Author : L. Fairhead, 27/01/94 !------------------------------------------------------------------------------- ! Purpose: Boundary conditions files building for new model using climatologies. ! Both grids have to be regular. !------------------------------------------------------------------------------- ! Note: This routine is designed to work for Earth !------------------------------------------------------------------------------- ! Modification history: ! * 23/03/1994: Z. X. Li ! * 09/1999: L. Fairhead (netcdf reading in LMDZ.3.3) ! * 07/2001: P. Le Van ! * 11/2009: L. Guez (ozone day & night climatos, see etat0_netcdf.F90) ! * 12/2009: D. Cugnet (f77->f90, calendars, files from coupled runs) !------------------------------------------------------------------------------- USE ioipsl, ONLY: flininfo, flinopen, flinget, flinclo USE assert_eq_m, ONLY: assert_eq USE cal_tools_m, ONLY: year_len, mid_month USE conf_dat_m, ONLY: conf_dat2d, conf_dat3d USE dimphy, ONLY: klon, zmasq USE geometry_mod, ONLY: longitude_deg, latitude_deg USE phys_state_var_mod, ONLY: pctsrf USE control_mod, ONLY: anneeref USE init_ssrf_m, ONLY: start_init_subsurf CHARACTER(LEN=20), PARAMETER :: & fsst(5)=['amipbc_sst_1x1.nc ','amip_sst_1x1.nc ','cpl_atm_sst.nc '& ,'histmth_sst.nc ','sstk.nc '] CHARACTER(LEN=20), PARAMETER :: & fsic(5)=['amipbc_sic_1x1.nc ','amip_sic_1x1.nc ','cpl_atm_sic.nc '& ,'histmth_sic.nc ','ci.nc '] CHARACTER(LEN=10), PARAMETER :: & vsst(5)=['tosbcs ','tos ','SISUTESW ','tsol_oce ','sstk '], & vsic(5)=['sicbcs ','sic ','SIICECOV ','pourc_sic ','ci '] CHARACTER(LEN=10), PARAMETER :: & frugo='Rugos.nc ', falbe='Albedo.nc ', frelf='Relief.nc ', & vrug='RUGOS ', valb='ALBEDO ', vrel='RELIEF ' CONTAINS !------------------------------------------------------------------------------- ! SUBROUTINE limit_netcdf(masque, phis, extrap) ! !------------------------------------------------------------------------------- ! Author : L. Fairhead, 27/01/94 !------------------------------------------------------------------------------- ! Purpose: Boundary conditions files building for new model using climatologies. ! Both grids have to be regular. !------------------------------------------------------------------------------- ! Note: This routine is designed to work for Earth !------------------------------------------------------------------------------- ! Modification history: ! * 23/03/1994: Z. X. Li ! * 09/1999: L. Fairhead (netcdf reading in LMDZ.3.3) ! * 07/2001: P. Le Van ! * 11/2009: L. Guez (ozone day & night climatos, see etat0_netcdf.F90) ! * 12/2009: D. Cugnet (f77->f90, calendars, files from coupled runs) ! * 04/2016: D. Cugnet (12/14 recs SST/SIC files: cyclic/interannual runs) ! * 05/2017: D. Cugnet (linear time interpolation for BCS files) !------------------------------------------------------------------------------- #ifndef CPP_1D USE indice_sol_mod USE netcdf, ONLY: NF90_OPEN, NF90_CREATE, NF90_CLOSE, & NF90_DEF_DIM, NF90_DEF_VAR, NF90_PUT_VAR, NF90_PUT_ATT, & NF90_NOERR, NF90_NOWRITE, NF90_DOUBLE, NF90_GLOBAL, & NF90_CLOBBER, NF90_ENDDEF, NF90_UNLIMITED, NF90_FLOAT USE inter_barxy_m, ONLY: inter_barxy USE netcdf95, ONLY: nf95_def_var, nf95_put_att, nf95_put_var USE comconst_mod, ONLY: pi USE phys_cal_mod, ONLY: calend IMPLICIT NONE !------------------------------------------------------------------------------- ! Arguments: include "iniprint.h" include "dimensions.h" include "paramet.h" REAL, DIMENSION(iip1,jjp1), INTENT(INOUT) :: masque ! land mask REAL, DIMENSION(iip1,jjp1), INTENT(INOUT) :: phis ! ground geopotential LOGICAL, INTENT(IN) :: extrap ! SST extrapolation flag !------------------------------------------------------------------------------- ! Local variables: include "comgeom2.h" !--- INPUT NETCDF FILES NAMES -------------------------------------------------- CHARACTER(LEN=20) :: icefile, sstfile, dumstr, fnam CHARACTER(LEN=10) :: varname !--- OUTPUT VARIABLES FOR NETCDF FILE ------------------------------------------ REAL :: fi_ice(klon), verif(klon) REAL, POINTER :: phy_rug(:,:)=>NULL(), phy_ice(:,:)=>NULL() REAL, POINTER :: phy_sst(:,:)=>NULL(), phy_alb(:,:)=>NULL() REAL, ALLOCATABLE :: phy_bil(:,:), pctsrf_t(:,:,:) INTEGER :: nbad !--- VARIABLES FOR OUTPUT FILE WRITING ----------------------------------------- INTEGER :: ierr, nid, ndim, ntim, k, dims(2), ix_sic, ix_sst INTEGER :: id_tim, id_SST, id_BILS, id_RUG, id_ALB INTEGER :: id_FOCE, id_FSIC, id_FTER, id_FLIC, varid_longitude, varid_latitude INTEGER :: NF90_FORMAT INTEGER :: ndays !--- Depending on the output calendar CHARACTER(LEN=256) :: str !--- INITIALIZATIONS ----------------------------------------------------------- #ifdef NC_DOUBLE NF90_FORMAT=NF90_DOUBLE #else NF90_FORMAT=NF90_FLOAT #endif CALL inigeom !--- MASK, GROUND GEOPOT. & SUBSURFACES COMPUTATION (IN CASE ok_etat0==.FALSE.) IF(ALL(masque==-99999.)) THEN CALL start_init_orog0(rlonv,rlatu,phis,masque) CALL gr_dyn_fi(1,iip1,jjp1,klon,masque,zmasq) !--- To physical grid ALLOCATE(pctsrf(klon,nbsrf)) CALL start_init_subsurf(.FALSE.) !--- TO MATCH EXACTLY WHAT WOULD BE DONE IN etat0phys_netcdf WHERE( masque(:,:)=1.0 ) fi_ice=1.0 WHERE(fi_ice=1.0-zmasq) pctsrf_t(:,is_sic,k)=1.0-zmasq pctsrf_t(:,is_oce,k)=0.0 ELSEWHERE pctsrf_t(:,is_oce,k)=1.0-zmasq-pctsrf_t(:,is_sic,k) WHERE(pctsrf_t(:,is_oce,k)0) WRITE(lunout,*) 'pb sous maille pour nb points = ',nbad nbad=COUNT(ABS(SUM(pctsrf_t(:,:,k),DIM=2)-1.0)>EPSFRA) IF(nbad>0) WRITE(lunout,*) 'pb sous surface pour nb points = ',nbad END DO DEALLOCATE(phy_ice) !--- SST TREATMENT ------------------------------------------------------------- CALL msg(0,""); CALL msg(0," *** TRAITEMENT DE LA SST ***") ! Input SST file selection ! Open file only to test if available DO ix_sst=1,SIZE(fsst) IF ( NF90_OPEN(TRIM(fsst(ix_sst)),NF90_NOWRITE,nid)==NF90_NOERR ) THEN sstfile=fsst(ix_sst); varname=vsst(ix_sst); EXIT END IF END DO IF(ix_sst==SIZE(fsst)+1) THEN WRITE(lunout,*) 'ERROR! No sst input file was found.' WRITE(lunout,*) 'One of following files must be available : ' DO k=1,SIZE(fsst); WRITE(lunout,*) TRIM(fsst(k)); END DO CALL abort_physic('limit_netcdf','No sst file was found',1) END IF CALL ncerr(NF90_CLOSE(nid),sstfile) CALL msg(0,'Fichier choisi pour la temperature de mer: '//TRIM(sstfile)) CALL get_2Dfield(sstfile,varname,'SST',ndays,phy_sst,flag=extrap) !--- ALBEDO TREATMENT ---------------------------------------------------------- CALL msg(0,""); CALL msg(0," *** TRAITEMENT DE L'ALBEDO ***") CALL get_2Dfield(falbe,valb,'ALB',ndays,phy_alb) !--- REFERENCE GROUND HEAT FLUX TREATMENT -------------------------------------- ALLOCATE(phy_bil(klon,ndays)); phy_bil=0.0 !--- OUTPUT FILE WRITING ------------------------------------------------------- CALL msg(0,""); CALL msg(0,' *** Ecriture du fichier limit : debut ***') fnam="limit.nc" !--- File creation CALL ncerr(NF90_CREATE(fnam,NF90_CLOBBER,nid),fnam) CALL ncerr(NF90_PUT_ATT(nid,NF90_GLOBAL,"title","Fichier conditions aux limites"),fnam) str='File produced using ce0l executable.' str=TRIM(str)//NEW_LINE(' ')//'Sea Ice Concentration built from' SELECT CASE(ix_sic) CASE(1); str=TRIM(str)//' Amip mid-month boundary condition (BCS).' CASE(2); str=TRIM(str)//' Amip monthly mean observations.' CASE(3); str=TRIM(str)//' IPSL coupled model outputs.' CASE(4); str=TRIM(str)//' LMDZ model outputs.' CASE(5); str=TRIM(str)//' ci.nc file.' END SELECT str=TRIM(str)//NEW_LINE(' ')//'Sea Surface Temperature built from' SELECT CASE(ix_sst) CASE(1); str=TRIM(str)//' Amip mid-month boundary condition (BCS).' CASE(2); str=TRIM(str)//' Amip monthly mean observations.' CASE(3); str=TRIM(str)//' IPSL coupled model outputs.' CASE(4); str=TRIM(str)//' LMDZ model outputs.' CASE(5); str=TRIM(str)//' sstk.nc file.' END SELECT CALL ncerr(NF90_PUT_ATT(nid,NF90_GLOBAL,"history",TRIM(str)),fnam) !--- Dimensions creation CALL ncerr(NF90_DEF_DIM(nid,"points_physiques",klon,ndim),fnam) CALL ncerr(NF90_DEF_DIM(nid,"time",NF90_UNLIMITED,ntim),fnam) dims=[ndim,ntim] !--- Variables creation CALL ncerr(NF90_DEF_VAR(nid,"TEMPS",NF90_FORMAT,[ntim],id_tim),fnam) CALL ncerr(NF90_DEF_VAR(nid,"FOCE", NF90_FORMAT,dims,id_FOCE),fnam) CALL ncerr(NF90_DEF_VAR(nid,"FSIC", NF90_FORMAT,dims,id_FSIC),fnam) CALL ncerr(NF90_DEF_VAR(nid,"FTER", NF90_FORMAT,dims,id_FTER),fnam) CALL ncerr(NF90_DEF_VAR(nid,"FLIC", NF90_FORMAT,dims,id_FLIC),fnam) CALL ncerr(NF90_DEF_VAR(nid,"SST", NF90_FORMAT,dims,id_SST),fnam) CALL ncerr(NF90_DEF_VAR(nid,"BILS", NF90_FORMAT,dims,id_BILS),fnam) CALL ncerr(NF90_DEF_VAR(nid,"ALB", NF90_FORMAT,dims,id_ALB),fnam) CALL ncerr(NF90_DEF_VAR(nid,"RUG", NF90_FORMAT,dims,id_RUG),fnam) call nf95_def_var(nid, "longitude", NF90_FLOAT, ndim, varid_longitude) call nf95_def_var(nid, "latitude", NF90_FLOAT, ndim, varid_latitude) !--- Attributes creation CALL ncerr(NF90_PUT_ATT(nid,id_tim, "title","Jour dans l annee"),fnam) CALL ncerr(NF90_PUT_ATT(nid,id_tim, "calendar",calend),fnam) CALL ncerr(NF90_PUT_ATT(nid,id_FOCE,"title","Fraction ocean"),fnam) CALL ncerr(NF90_PUT_ATT(nid,id_FSIC,"title","Fraction glace de mer"),fnam) CALL ncerr(NF90_PUT_ATT(nid,id_FTER,"title","Fraction terre"),fnam) CALL ncerr(NF90_PUT_ATT(nid,id_FLIC,"title","Fraction land ice"),fnam) CALL ncerr(NF90_PUT_ATT(nid,id_SST ,"title","Temperature superficielle de la mer"),fnam) CALL ncerr(NF90_PUT_ATT(nid,id_BILS,"title","Reference flux de chaleur au sol"),fnam) CALL ncerr(NF90_PUT_ATT(nid,id_ALB, "title","Albedo a la surface"),fnam) CALL ncerr(NF90_PUT_ATT(nid,id_RUG, "title","Rugosite"),fnam) call nf95_put_att(nid, varid_longitude, "standard_name", "longitude") call nf95_put_att(nid, varid_longitude, "units", "degrees_east") call nf95_put_att(nid, varid_latitude, "standard_name", "latitude") call nf95_put_att(nid, varid_latitude, "units", "degrees_north") CALL ncerr(NF90_ENDDEF(nid),fnam) !--- Variables saving CALL ncerr(NF90_PUT_VAR(nid,id_tim,[(REAL(k),k=1,ndays)]),fnam) CALL ncerr(NF90_PUT_VAR(nid,id_FOCE,pctsrf_t(:,is_oce,:),[1,1],[klon,ndays]),fnam) CALL ncerr(NF90_PUT_VAR(nid,id_FSIC,pctsrf_t(:,is_sic,:),[1,1],[klon,ndays]),fnam) CALL ncerr(NF90_PUT_VAR(nid,id_FTER,pctsrf_t(:,is_ter,:),[1,1],[klon,ndays]),fnam) CALL ncerr(NF90_PUT_VAR(nid,id_FLIC,pctsrf_t(:,is_lic,:),[1,1],[klon,ndays]),fnam) CALL ncerr(NF90_PUT_VAR(nid,id_SST ,phy_sst(:,:),[1,1],[klon,ndays]),fnam) CALL ncerr(NF90_PUT_VAR(nid,id_BILS,phy_bil(:,:),[1,1],[klon,ndays]),fnam) CALL ncerr(NF90_PUT_VAR(nid,id_ALB ,phy_alb(:,:),[1,1],[klon,ndays]),fnam) CALL ncerr(NF90_PUT_VAR(nid,id_RUG ,phy_rug(:,:),[1,1],[klon,ndays]),fnam) call nf95_put_var(nid, varid_longitude, longitude_deg) call nf95_put_var(nid, varid_latitude, latitude_deg) CALL ncerr(NF90_CLOSE(nid),fnam) CALL msg(0,""); CALL msg(0,' *** Ecriture du fichier limit : fin ***') DEALLOCATE(pctsrf_t,phy_sst,phy_bil,phy_alb,phy_rug) !=============================================================================== ! CONTAINS ! !=============================================================================== !------------------------------------------------------------------------------- ! SUBROUTINE get_2Dfield(fnam, varname, mode, ndays, champo, flag, mask) ! !----------------------------------------------------------------------------- ! Comments: ! There are two assumptions concerning the NetCDF files, that are satisfied ! with files that are conforming NC convention: ! 1) The last dimension of the variables used is the time record. ! 2) Dimensional variables have the same names as corresponding dimensions. !----------------------------------------------------------------------------- USE netcdf, ONLY: NF90_OPEN, NF90_INQ_VARID, NF90_INQUIRE_VARIABLE, & NF90_CLOSE, NF90_INQ_DIMID, NF90_INQUIRE_DIMENSION, NF90_GET_VAR, & NF90_GET_ATT USE pchsp_95_m, only: pchsp_95 USE pchfe_95_m, only: pchfe_95 USE arth_m, only: arth USE indice_sol_mod IMPLICIT NONE include "dimensions.h" include "paramet.h" include "comgeom2.h" !----------------------------------------------------------------------------- ! Arguments: CHARACTER(LEN=*), INTENT(IN) :: fnam ! NetCDF file name CHARACTER(LEN=10), INTENT(IN) :: varname ! NetCDF variable name CHARACTER(LEN=3), INTENT(IN) :: mode ! RUG, SIC, SST or ALB INTEGER, INTENT(IN) :: ndays ! current year number of days REAL, POINTER, DIMENSION(:, :) :: champo ! output field = f(t) LOGICAL, OPTIONAL, INTENT(IN) :: flag ! extrapol. (SST) old ice (SIC) REAL, OPTIONAL, DIMENSION(iim, jjp1), INTENT(IN) :: mask !------------------------------------------------------------------------------ ! Local variables: !--- NetCDF INTEGER :: ncid, varid ! NetCDF identifiers CHARACTER(LEN=30) :: dnam ! dimension name !--- dimensions INTEGER :: dids(4) ! NetCDF dimensions identifiers REAL, ALLOCATABLE :: dlon_ini(:) ! initial longitudes vector REAL, ALLOCATABLE :: dlat_ini(:) ! initial latitudes vector REAL, POINTER :: dlon(:), dlat(:) ! reordered lon/lat vectors !--- fields INTEGER :: imdep, jmdep, lmdep ! dimensions of 'champ' REAL, ALLOCATABLE :: champ(:,:) ! wanted field on initial grid REAL, ALLOCATABLE :: yder(:), timeyear(:) REAL :: champint(iim,jjp1) ! interpolated field REAL, ALLOCATABLE :: champtime(:,:,:) REAL, ALLOCATABLE :: champan(:,:,:) !--- input files CHARACTER(LEN=20) :: fnam_m, fnam_p ! previous/next files names CHARACTER(LEN=20) :: cal_in ! calendar CHARACTER(LEN=20) :: unit_sic ! attribute "units" in sea-ice file CHARACTER(LEN=20) :: unit_sst ! attribute "units" in sst file INTEGER :: ndays_in ! number of days !--- misc INTEGER :: i, j, k, l, ll ! loop counters REAL, ALLOCATABLE :: work(:,:) ! used for extrapolation CHARACTER(LEN=128):: title, mess ! for messages LOGICAL :: is_bcs ! flag for BCS data LOGICAL :: extrp ! flag for extrapolation REAL :: chmin, chmax, timeday, al INTEGER ierr, idx integer n_extrap ! number of extrapolated points logical skip !------------------------------------------------------------------------------ !---Variables depending on keyword 'mode' ------------------------------------- NULLIFY(champo) SELECT CASE(mode) CASE('RUG'); title='Rugosite' CASE('SIC'); title='Sea-ice' CASE('SST'); title='SST' CASE('ALB'); title='Albedo' END SELECT extrp=.FALSE.; IF(PRESENT(flag).AND.mode=='SST') extrp=flag is_bcs=(mode=='SIC'.AND.ix_sic==1).OR.(mode=='SST'.AND.ix_sst==1) idx=INDEX(fnam,'.nc')-1 !--- GETTING SOME DIMENSIONAL VARIABLES FROM FILE ----------------------------- CALL msg(5,' Now reading file : '//TRIM(fnam)) CALL ncerr(NF90_OPEN(fnam, NF90_NOWRITE, ncid),fnam) CALL ncerr(NF90_INQ_VARID(ncid, trim(varname), varid),fnam) CALL ncerr(NF90_INQUIRE_VARIABLE(ncid, varid, dimids=dids),fnam) !--- Read unit for sea-ice and sst only IF (mode=='SIC') THEN ierr=NF90_GET_ATT(ncid, varid, 'units', unit_sic); CALL strclean(unit_sic) IF(ierr/=NF90_NOERR) THEN; unit_sic='%' CALL msg(0,'No unit in sea-ice file. Take percentage as default value') ELSE IF(TRIM(unit_sic)=="%") THEN CALL msg(0,'Sea-ice cover is a PERCENTAGE.') ELSE IF(ANY(unit_sic==["1.0","1 "])) THEN; unit_sic="1" CALL msg(0,'Sea-ice cover is a FRACTION.') ELSE CALL abort_physic('SIC','Unrecognized sea-ice unit: '//TRIM(unit_sic),1) END IF END IF IF (mode=='SST') THEN ierr=NF90_GET_ATT(ncid, varid, 'units', unit_sst); CALL strclean(unit_sst) IF(ierr/=NF90_NOERR) THEN CALL msg(0,'No unit in sst file. Take default: kelvins.') unit_sst='X' ELSE IF(ANY(unit_sst==["degC ","DegC "])) THEN; unit_sst='C' CALL msg(0,'Sea-surface temperature is in CELCIUS DEGREES.') ELSE IF(ANY(unit_sst==["K ","Kelvin"])) THEN; unit_sst='K' CALL msg(0,'Sea-surface temperature is in KELVINS.') ELSE CALL abort_physic('SST','Unrecognized sst unit: '//TRIM(unit_sst),1) END IF END IF !--- Longitude CALL ncerr(NF90_INQUIRE_DIMENSION(ncid, dids(1), name=dnam, len=imdep),fnam) ALLOCATE(dlon_ini(imdep), dlon(imdep)) CALL ncerr(NF90_INQ_VARID(ncid, dnam, varid), fnam) CALL ncerr(NF90_GET_VAR(ncid, varid, dlon_ini), fnam) CALL msg(5,'variable '//TRIM(dnam)//' dimension ', imdep) !--- Latitude CALL ncerr(NF90_INQUIRE_DIMENSION(ncid, dids(2), name=dnam, len=jmdep),fnam) ALLOCATE(dlat_ini(jmdep), dlat(jmdep)) CALL ncerr(NF90_INQ_VARID(ncid, dnam, varid), fnam) CALL ncerr(NF90_GET_VAR(ncid, varid, dlat_ini), fnam) CALL msg(5,'variable '//TRIM(dnam)//' dimension ', jmdep) !--- Time (variable is not needed - it is rebuilt - but calendar is) CALL ncerr(NF90_INQUIRE_DIMENSION(ncid, dids(3), name=dnam, len=lmdep), fnam) ALLOCATE(timeyear(lmdep+2)) CALL ncerr(NF90_INQ_VARID(ncid, dnam, varid), fnam) cal_in=' ' IF(NF90_GET_ATT(ncid, varid, 'calendar', cal_in)/=NF90_NOERR) THEN SELECT CASE(mode) CASE('RUG', 'ALB'); cal_in='360d' CASE('SIC', 'SST'); cal_in='gregorian' END SELECT CALL msg(0,'WARNING: missing "calendar" attribute for "time" in '& &//TRIM(fnam)//'. Choosing default value.') END IF CALL strclean(cal_in) !--- REMOVE (WEIRD) NULL CHARACTERS CALL msg(0,'var, calendar, dim: '//TRIM(dnam)//' '//TRIM(cal_in), lmdep) !--- Determining input file number of days, depending on calendar ndays_in=year_len(anneeref, cal_in) !--- Rebuilding input time vector (field from input file might be unreliable) IF(lmdep==12) THEN timeyear=mid_month(anneeref, cal_in) CALL msg(0,'Monthly input file(s) for '//TRIM(title)//'.') ELSE IF(lmdep==ndays_in) THEN timeyear=[(REAL(k)-0.5,k=0,ndays_in+1)] CALL msg(0,'Daily input file (no time interpolation).') ELSE WRITE(mess,'(a,i3,a,i3,a)')'Mismatching input file: found',lmdep, & ' records, 12/',ndays_in,' (monthly/daily needed).' CALL abort_physic('mid_month',TRIM(mess),1) END IF !--- GETTING THE FIELD AND INTERPOLATING IT ---------------------------------- ALLOCATE(champ(imdep, jmdep), champtime(iim, jjp1, lmdep+2)) IF(extrp) ALLOCATE(work(imdep, jmdep)) CALL msg(5,'') CALL msg(5,'READ AND INTERPOLATE HORIZONTALLY ', lmdep, ' FIELDS.') CALL ncerr(NF90_INQ_VARID(ncid, varname, varid), fnam) DO l=1, lmdep CALL ncerr(NF90_GET_VAR(ncid,varid,champ,[1,1,l],[imdep,jmdep,1]),fnam) !--- Check whether values are acceptable for SIC, depending on unit. !--- Dropped for mid-month boundary conditions datasets (BCS, ix_sic==1) IF(mode=='SIC'.AND.ix_sic/=1) THEN IF(TRIM(unit_sic)=="1".OR.TRIM(unit_sic)=="1.0") THEN IF(ANY(champ>1.0+EPSFRA)) & CALL abort_physic('SIC','Found sea-ice fractions greater than 1.') ELSE IF(TRIM(unit_sic)=="%") THEN IF(ANY(champ>100.0+EPSFRA)) & CALL abort_physic('SIC','Found sea-ice percentages greater than 100.') ! IF(MAXVAL(champ)< 1.01) & ! CALL abort_physic('SIC','All sea-ice percentages lower than 1.') END IF END IF CALL conf_dat2d(title, dlon_ini, dlat_ini, dlon, dlat, champ, .TRUE.) IF(extrp) CALL extrapol(champ,imdep,jmdep,999999.,.TRUE.,.TRUE.,2,work) IF(l==1) THEN CALL msg(5,"----------------------------------------------------------") CALL msg(5,"$$$ Barycentrique interpolation for "//TRIM(title)//" $$$") CALL msg(5,"----------------------------------------------------------") END IF IF(mode=='RUG') champ=LOG(champ) CALL inter_barxy(dlon,dlat(:jmdep-1),champ,rlonu(:iim),rlatv,champint) IF(mode=='RUG') THEN champint=EXP(champint) WHERE(NINT(mask)/=1) champint=0.001 END IF champtime(:, :, l+1)=champint END DO CALL ncerr(NF90_CLOSE(ncid), fnam) !--- FIRST RECORD: LAST ONE OF PREVIOUS YEAR (CURRENT YEAR IF UNAVAILABLE) fnam_m=fnam(1:idx)//'_m.nc' IF(NF90_OPEN(fnam_m,NF90_NOWRITE,ncid)==NF90_NOERR) THEN CALL msg(0,'Reading previous year file ("'//TRIM(fnam_m)//'") last record for '//TRIM(title)) CALL ncerr(NF90_INQ_VARID(ncid, varname, varid),fnam_m) CALL ncerr(NF90_INQUIRE_VARIABLE(ncid, varid, dimids=dids),fnam_m) CALL ncerr(NF90_INQUIRE_DIMENSION(ncid, dids(3), len=l), fnam_m) CALL ncerr(NF90_GET_VAR(ncid,varid,champ,[1,1,l],[imdep,jmdep,1]),fnam_m) CALL ncerr(NF90_CLOSE(ncid), fnam_m) CALL conf_dat2d(title, dlon_ini, dlat_ini, dlon, dlat, champ, .TRUE.) IF(extrp) CALL extrapol(champ,imdep,jmdep,999999.,.TRUE.,.TRUE.,2,work) IF(mode=='RUG') champ=LOG(champ) CALL inter_barxy(dlon,dlat(:jmdep-1),champ,rlonu(:iim),rlatv,champint) IF(mode=='RUG') THEN champint=EXP(champint) WHERE(NINT(mask)/=1) champint=0.001 END IF champtime(:, :, 1)=champint ELSE CALL msg(0,'Using current year file ("'//TRIM(fnam)//'") last record for '//TRIM(title)) champtime(:, :, 1)=champtime(:, :, lmdep+1) END IF !--- LAST RECORD: FIRST ONE OF NEXT YEAR (CURRENT YEAR IF UNAVAILABLE) fnam_p=fnam(1:idx)//'_p.nc' IF(NF90_OPEN(fnam_p,NF90_NOWRITE,ncid)==NF90_NOERR) THEN CALL msg(0,'Reading next year file ("'//TRIM(fnam_p)//'") first record for '//TRIM(title)) CALL ncerr(NF90_INQ_VARID(ncid, varname, varid),fnam_p) CALL ncerr(NF90_GET_VAR(ncid,varid,champ,[1,1,1],[imdep,jmdep,1]),fnam_p) CALL ncerr(NF90_CLOSE(ncid), fnam_p) CALL conf_dat2d(title, dlon_ini, dlat_ini, dlon, dlat, champ, .TRUE.) IF(extrp) CALL extrapol(champ,imdep,jmdep,999999.,.TRUE.,.TRUE.,2,work) IF(mode=='RUG') champ=LOG(champ) CALL inter_barxy(dlon,dlat(:jmdep-1),champ,rlonu(:iim),rlatv,champint) IF(mode=='RUG') THEN champint=EXP(champint) WHERE(NINT(mask)/=1) champint=0.001 END IF champtime(:, :, lmdep+2)=champint ELSE CALL msg(0,'Using current year file ("'//TRIM(fnam)//'") first record for '//TRIM(title)) champtime(:, :, lmdep+2)=champtime(:, :, 2) END IF DEALLOCATE(dlon_ini, dlat_ini, dlon, dlat, champ) IF(extrp) DEALLOCATE(work) !--- TIME INTERPOLATION ------------------------------------------------------ IF(prt_level>0) THEN IF(ndays/=ndays_in) THEN WRITE(lunout,*)'DIFFERENT YEAR LENGTHS:' WRITE(lunout,*)' In the input file: ',ndays_in WRITE(lunout,*)' In the output file: ',ndays END IF IF(lmdep==ndays_in) THEN WRITE(lunout, *)'NO TIME INTERPOLATION.' WRITE(lunout, *)' Daily input file.' ELSE IF( is_bcs) WRITE(lunout, *)'LINEAR TIME INTERPOLATION.' IF(.NOT.is_bcs) WRITE(lunout, *)'SPLINES TIME INTERPOLATION.' WRITE(lunout, *)' Input time vector: ', timeyear WRITE(lunout, *)' Output time vector from 0 to ', ndays-1 END IF END IF ALLOCATE(champan(iip1, jjp1, ndays)) IF(lmdep==ndays_in) THEN !--- DAILY DATA: NO TIME INTERPOLATION champan(1:iim,:,:)=champtime ELSE IF(is_bcs) THEN !--- BCS DATA: LINEAR TIME INTERPOLATION l=1 DO k=1, ndays timeday = (REAL(k)-0.5)*REAL(ndays_in)/ndays IF(timeyear(l+1)= 271.38') WHERE(champan<271.38) champan=271.38 END IF !--- SPECIAL FILTER FOR SIC: 0.01.0) champan=1.0 WHERE(champan<0.0) champan=0.0 END IF !--- DYNAMICAL TO PHYSICAL GRID ---------------------------------------------- ALLOCATE(champo(klon, ndays)) DO k=1, ndays CALL gr_dyn_fi(1, iip1, jjp1, klon, champan(1, 1, k), champo(1, k)) END DO DEALLOCATE(champan) END SUBROUTINE get_2Dfield ! !------------------------------------------------------------------------------- !------------------------------------------------------------------------------- ! SUBROUTINE start_init_orog0(lon_in,lat_in,phis,masque) ! !------------------------------------------------------------------------------- USE grid_noro_m, ONLY: grid_noro0 IMPLICIT NONE !=============================================================================== ! Purpose: Compute "phis" just like it would be in start_init_orog. !=============================================================================== ! Arguments: REAL, INTENT(IN) :: lon_in(:), lat_in(:) ! dim (iml) (jml) REAL, INTENT(INOUT) :: phis(:,:), masque(:,:) ! dim (iml,jml) !------------------------------------------------------------------------------- ! Local variables: CHARACTER(LEN=256) :: modname="start_init_orog0" INTEGER :: fid, llm_tmp,ttm_tmp, iml,jml, iml_rel,jml_rel, itau(1) REAL :: lev(1), date, dt, deg2rad REAL, ALLOCATABLE :: lon_rad(:), lon_ini(:), lon_rel(:,:), relief_hi(:,:) REAL, ALLOCATABLE :: lat_rad(:), lat_ini(:), lat_rel(:,:) !------------------------------------------------------------------------------- iml=assert_eq(SIZE(lon_in),SIZE(phis,1),SIZE(masque,1),TRIM(modname)//" iml") jml=assert_eq(SIZE(lat_in),SIZE(phis,2),SIZE(masque,2),TRIM(modname)//" jml") IF(iml/=iip1) CALL abort_gcm(TRIM(modname),'iml/=iip1',1) IF(jml/=jjp1) CALL abort_gcm(TRIM(modname),'jml/=jjp1',1) pi=2.0*ASIN(1.0); deg2rad=pi/180.0 IF(ANY(phis/=-99999.)) RETURN !--- phis ALREADY KNOWN !--- HIGH RESOLUTION OROGRAPHY CALL flininfo(frelf, iml_rel, jml_rel, llm_tmp, ttm_tmp, fid) ALLOCATE(lat_rel(iml_rel,jml_rel),lon_rel(iml_rel,jml_rel)) CALL flinopen(frelf, .FALSE., iml_rel, jml_rel, llm_tmp, lon_rel, lat_rel, & lev, ttm_tmp, itau, date, dt, fid) ALLOCATE(relief_hi(iml_rel,jml_rel)) CALL flinget(fid, vrel, iml_rel, jml_rel, llm_tmp, ttm_tmp, 1, 1, relief_hi) CALL flinclo(fid) !--- IF ANGLES ARE IN DEGREES, THEY ARE CONVERTED INTO RADIANS ALLOCATE(lon_ini(iml_rel),lat_ini(jml_rel)) lon_ini(:)=lon_rel(:,1); IF(MAXVAL(lon_rel)>pi) lon_ini=lon_ini*deg2rad lat_ini(:)=lat_rel(1,:); IF(MAXVAL(lat_rel)>pi) lat_ini=lat_ini*deg2rad !--- FIELDS ARE PROCESSED TO BE ON STANDARD ANGULAR DOMAINS ALLOCATE(lon_rad(iml_rel),lat_rad(jml_rel)) CALL conf_dat2d(vrel, lon_ini, lat_ini, lon_rad, lat_rad, relief_hi, .FALSE.) DEALLOCATE(lon_ini,lat_ini) !--- COMPUTING SURFACE GEOPOTENTIAL USING ROUTINE grid_noro0 WRITE(lunout,*) WRITE(lunout,*)'*** Compute surface geopotential ***' !--- CALL OROGRAPHY MODULE (REDUCED VERSION) TO COMPUTE FIELDS CALL grid_noro0(lon_rad, lat_rad, relief_hi, lon_in, lat_in, phis, masque) phis = phis * 9.81 phis(iml,:) = phis(1,:) DEALLOCATE(relief_hi,lon_rad,lat_rad) END SUBROUTINE start_init_orog0 ! !------------------------------------------------------------------------------- !------------------------------------------------------------------------------- ! SUBROUTINE msg(lev,str1,i,str2) ! !------------------------------------------------------------------------------- ! Arguments: INTEGER, INTENT(IN) :: lev CHARACTER(LEN=*), INTENT(IN) :: str1 INTEGER, OPTIONAL, INTENT(IN) :: i CHARACTER(LEN=*), OPTIONAL, INTENT(IN) :: str2 !------------------------------------------------------------------------------- IF(prt_level>=lev) THEN IF(PRESENT(str2)) THEN WRITE(lunout,*) TRIM(str1), i, TRIM(str2) ELSE IF(PRESENT(i)) THEN WRITE(lunout,*) TRIM(str1), i ELSE WRITE(lunout,*) TRIM(str1) END IF END IF END SUBROUTINE msg ! !------------------------------------------------------------------------------- !------------------------------------------------------------------------------- ! SUBROUTINE ncerr(ncres,fnam) ! !------------------------------------------------------------------------------- ! Purpose: NetCDF errors handling. !------------------------------------------------------------------------------- USE netcdf, ONLY : NF90_NOERR, NF90_STRERROR IMPLICIT NONE !------------------------------------------------------------------------------- ! Arguments: INTEGER, INTENT(IN) :: ncres CHARACTER(LEN=*), INTENT(IN) :: fnam !------------------------------------------------------------------------------- IF(ncres/=NF90_NOERR) THEN WRITE(lunout,*)'Problem with file '//TRIM(fnam)//' in routine limit_netcdf.' CALL abort_physic('limit_netcdf',NF90_STRERROR(ncres),1) END IF END SUBROUTINE ncerr ! !------------------------------------------------------------------------------- !------------------------------------------------------------------------------- ! SUBROUTINE strclean(s) ! !------------------------------------------------------------------------------- IMPLICIT NONE !------------------------------------------------------------------------------- ! Purpose: Remove tail null characters from the input string. !------------------------------------------------------------------------------- ! Parameters: CHARACTER(LEN=*), INTENT(INOUT) :: s !------------------------------------------------------------------------------- ! Local variable: INTEGER :: k !------------------------------------------------------------------------------- k=LEN_TRIM(s); DO WHILE(ICHAR(s(k:k))==0); s(k:k)=' '; k=LEN_TRIM(s); END DO END SUBROUTINE strclean ! !------------------------------------------------------------------------------- #endif ! of #ifndef CPP_1D END SUBROUTINE limit_netcdf END MODULE limit ! !*******************************************************************************