MODULE etat0phys ! !******************************************************************************* ! Purpose: Create physical initial state using atmospheric fields from a ! database of atmospheric to initialize the model. !------------------------------------------------------------------------------- ! Comments: ! ! * This module is designed to work for Earth (and with ioipsl) ! ! * etat0phys_netcdf routine can access to NetCDF data through subroutines: ! "start_init_phys" for variables contained in file "ECPHY.nc": ! 'ST' : Surface temperature ! 'CDSW' : Soil moisture ! "start_init_orog" for variables contained in file "Relief.nc": ! 'RELIEF' : High resolution orography ! ! * The land mask and corresponding weights can be: ! 1) computed using the ocean mask from the ocean model (to ensure ocean ! fractions are the same for atmosphere and ocean) for coupled runs. ! File name: "o2a.nc" ; variable name: "OceMask" ! 2) computed from topography file "Relief.nc" for forced runs. ! ! * Allowed values for read_climoz flag are 0, 1 and 2: ! 0: do not read an ozone climatology ! 1: read a single ozone climatology that will be used day and night ! 2: read two ozone climatologies, the average day and night climatology ! and the daylight climatology !------------------------------------------------------------------------------- ! * There is a big mess with the longitude size. Should it be iml or iml+1 ? ! I have chosen to use the iml+1 as an argument to this routine and we declare ! internaly smaller fields when needed. This needs to be cleared once and for ! all in LMDZ. A convention is required. !------------------------------------------------------------------------------- USE ioipsl, ONLY: flininfo, flinopen, flinget, flinclo USE assert_eq_m, ONLY: assert_eq USE dimphy USE phys_state_var_mod, ONLY: zmea, zstd, zsig, zgam, zthe, zpic, zval, z0m, & rlon, solsw, radsol, t_ancien, wake_deltat, wake_s, rain_fall, qsol, z0h, & rlat, sollw, rugoro, q_ancien, wake_deltaq, wake_pe, snow_fall, ratqs,w01, & sig1, ftsol, clwcon, fm_therm, wake_Cstar, pctsrf, entr_therm,radpas, f0,& zmax0,fevap, rnebcon,falb_dir, wake_fip, agesno, detr_therm, pbl_tke, & phys_state_var_init PRIVATE PUBLIC :: etat0phys_netcdf include "iniprint.h" include "dimensions.h" include "paramet.h" include "comgeom2.h" include "comvert.h" include "comconst.h" include "dimsoil.h" include "temps.h" include "comdissnew.h" include "serre.h" include "clesphys.h" REAL, SAVE :: deg2rad REAL, SAVE, ALLOCATABLE :: tsol(:) ! REAL, SAVE, ALLOCATABLE :: rugo(:,:) ! ??? COMPUTED BUT NOT USED ??? INTEGER, SAVE :: iml_phys, jml_phys, llm_phys, ttm_phys, fid_phys REAL, ALLOCATABLE, SAVE :: lon_phys(:,:), lat_phys(:,:), levphys_ini(:) CHARACTER(LEN=256), PARAMETER :: orofname="Relief.nc" CHARACTER(LEN=256), PARAMETER :: title="RELIEF" CONTAINS !------------------------------------------------------------------------------- ! SUBROUTINE etat0phys_netcdf(ib, masque, phis) ! !------------------------------------------------------------------------------- ! Purpose: Creates initial states !------------------------------------------------------------------------------- ! Note: This routine is designed to work for Earth !------------------------------------------------------------------------------- USE control_mod USE fonte_neige_mod USE pbl_surface_mod USE regr_lat_time_climoz_m, ONLY: regr_lat_time_climoz USE indice_sol_mod USE conf_phys_m, ONLY: conf_phys USE exner_hyb_m, ONLY: exner_hyb USE exner_milieu_m, ONLY: exner_milieu USE test_disvert_m, ONLY: test_disvert USE grid_atob_m, ONLY: grille_m IMPLICIT NONE !------------------------------------------------------------------------------- ! Arguments: LOGICAL, INTENT(IN) :: ib !--- Barycentric interpolation REAL, INTENT(INOUT) :: masque(:,:) !--- Land mask dim(iip1,jjp1) REAL, INTENT(INOUT) :: phis (:,:) !--- Ground geopotential dim(iip1,jjp1) !------------------------------------------------------------------------------- ! Local variables: CHARACTER(LEN=256) :: modname="etat0phys_netcdf", fmt INTEGER :: i, j, l, ji, iml, jml REAL :: phystep REAL, DIMENSION(SIZE(masque,1),SIZE(masque,2)) :: masque_tmp REAL, DIMENSION(klon) :: sn, rugmer, run_off_lic_0, fder REAL, DIMENSION(klon,nbsrf) :: qsolsrf, snsrf REAL, DIMENSION(klon,nsoilmx,nbsrf) :: tsoil !--- Local variables for sea-ice reading: LOGICAL :: read_mask INTEGER :: iml_lic, jml_lic, isst(klon-2) INTEGER :: fid, llm_tmp, ttm_tmp, itaul(1) REAL, ALLOCATABLE :: dlon_lic(:), lon_lic(:,:), fraclic(:,:) REAL, ALLOCATABLE :: dlat_lic(:), lat_lic(:,:) REAL :: date, lev(1), dummy REAL :: flic_tmp(SIZE(masque,1),SIZE(masque,2)) !--- Arguments for conf_phys LOGICAL :: ok_journe, ok_mensuel, ok_instan, ok_hf, ok_LES, callstats REAL :: solarlong0, seuil_inversion, fact_cldcon, facttemps LOGICAL :: ok_newmicro INTEGER :: iflag_radia, iflag_cldcon, iflag_ratqs REAL :: ratqsbas, ratqshaut, tau_ratqs LOGICAL :: ok_ade, ok_aie, ok_cdnc, aerosol_couple INTEGER :: flag_aerosol LOGICAL :: flag_aerosol_strat LOGICAL :: new_aod REAL :: bl95_b0, bl95_b1 INTEGER :: read_climoz !--- Read ozone climatology REAL :: alp_offset deg2rad= pi/180.0 iml=assert_eq(SIZE(masque,1),SIZE(phis,1),TRIM(modname)//" iml") jml=assert_eq(SIZE(masque,2),SIZE(phis,2),TRIM(modname)//" jml") ! Grid construction and miscellanous initializations. !******************************************************************************* CALL conf_phys( ok_journe, ok_mensuel, ok_instan, ok_hf, ok_LES, & callstats, & solarlong0,seuil_inversion, & fact_cldcon, facttemps,ok_newmicro,iflag_radia, & iflag_cldcon, & iflag_ratqs,ratqsbas,ratqshaut,tau_ratqs, & ok_ade, ok_aie, ok_cdnc, aerosol_couple, & flag_aerosol, flag_aerosol_strat, new_aod, & bl95_b0, bl95_b1, & read_climoz, & alp_offset) CALL phys_state_var_init(read_climoz) co2_ppm0 = co2_ppm !--- Initial atmospheric CO2 conc. from .def file rlat(1) = pi/2. DO j=2,jjm; rlat((j-2)*iim+2:(j-1)*iim+1)=rlatu(j); END DO rlat(klon) = - pi/2. rlat(:)=rlat(:)*(180.0/pi) rlon(1) = 0.0 DO j=2,jjm; rlon((j-2)*iim+2:(j-1)*iim+1)=rlonv(1:iim); END DO rlon(klon) = 0.0 rlon(:)=rlon(:)*(180.0/pi) ! Compute ground geopotential, sub-cells quantities and possibly the mask. !******************************************************************************* read_mask=ANY(masque/=-99999.); masque_tmp=masque CALL start_init_orog(rlonv, rlatu, phis, masque_tmp) WRITE(fmt,"(i4,'i1)')")iml ; fmt='('//ADJUSTL(fmt) IF(.NOT.read_mask) THEN !--- Keep mask form orography masque=masque_tmp IF(prt_level>=1) THEN WRITE(lunout,*)'BUILT MASK :' WRITE(lunout,fmt) NINT(masque) END IF WHERE( masque(:,:)=1) & !--- Ozone climatology CALL regr_lat_time_climoz(read_climoz) ! Sub-surfaces initialization !******************************************************************************* !--- Read and interpolate on model T-grid soil fraction and soil ice fraction. CALL flininfo("landiceref.nc", iml_lic, jml_lic, llm_tmp, ttm_tmp, fid) ALLOCATE( lat_lic(iml_lic,jml_lic),lon_lic(iml_lic, jml_lic)) ALLOCATE(dlat_lic(jml_lic), dlon_lic(iml_lic)) ALLOCATE( fraclic(iml_lic,jml_lic)) CALL flinopen("landiceref.nc", .FALSE., iml_lic, jml_lic, llm_tmp, & & lon_lic, lat_lic, lev, ttm_tmp, itaul, date, dt, fid) CALL flinget(fid, 'landice', iml_lic, jml_lic, llm_tmp, ttm_tmp, 1,1, fraclic) CALL flinclo(fid) WRITE(lunout,*)'landice dimensions: iml_lic, jml_lic : ',iml_lic,jml_lic IF(MAXVAL(lon_lic)>pi) lon_lic=lon_lic*pi/180. !--- Conversion to degrees IF(MAXVAL(lat_lic)>pi) lat_lic=lat_lic*pi/180. dlon_lic(:)=lon_lic(:,1) dlat_lic(:)=lat_lic(1,:) CALL grille_m(dlon_lic, dlat_lic, fraclic, rlonv(1:iim), rlatu, flic_tmp(1:iim,:) ) flic_tmp(iml,:)=flic_tmp(1,:) !--- To the physical grid pctsrf(:,:) = 0. CALL gr_dyn_fi(1, iml, jml, klon, flic_tmp, pctsrf(:,is_lic)) !--- Adequation with soil/sea mask WHERE(pctsrf(:,is_lic)EPSFRA) THEN IF(pctsrf(ji,is_lic)>=zmasq(ji)) THEN pctsrf(ji,is_lic)=zmasq(ji) pctsrf(ji,is_ter)=0. ELSE pctsrf(ji,is_ter)=zmasq(ji)-pctsrf(ji,is_lic) IF(pctsrf(ji,is_ter)0.) isst=1 !--- It is checked that the sub-surfaces sum is equal to 1. ji=COUNT((ABS(SUM(pctsrf(:,:),dim=2))-1.0)>EPSFRA) IF(ji/=0) WRITE(lunout,*) 'Sub-cell distribution problem for ',ji,' points' ! Write physical initial state !******************************************************************************* WRITE(lunout,*)'phystep ',dtvr,iphysiq,nbapp_rad phystep = dtvr * FLOAT(iphysiq) radpas = NINT (86400./phystep/ FLOAT(nbapp_rad) ) WRITE(lunout,*)'phystep =', phystep, radpas ! Init: ftsol, snsrf, qsolsrf, tsoil, rain_fall, snow_fall, solsw, sollw, z0 !******************************************************************************* DO i=1,nbsrf; ftsol(:,i) = tsol; END DO DO i=1,nbsrf; snsrf(:,i) = sn; END DO falb_dir(:,is_ter,:) = 0.08 falb_dir(:,is_lic,:) = 0.6 falb_dir(:,is_oce,:) = 0.5 falb_dir(:,is_sic,:) = 0.6 fevap(:,:) = 0. DO i=1,nbsrf; qsolsrf(:,i)=150.; END DO DO i=1,nbsrf; DO j=1,nsoilmx; tsoil(:,j,i) = tsol; END DO; END DO rain_fall = 0. snow_fall = 0. solsw = 165. sollw = -53. t_ancien = 273.15 q_ancien = 0. agesno = 0. z0m(:,is_oce) = rugmer(:) z0m(:,is_ter) = MAX(1.0e-05,zstd(:)*zsig(:)/2.0) z0m(:,is_lic) = MAX(1.0e-05,zstd(:)*zsig(:)/2.0) z0m(:,is_sic) = 0.001 z0h(:,:)=z0m(:,:) fder = 0.0 clwcon = 0.0 rnebcon = 0.0 ratqs = 0.0 run_off_lic_0 = 0.0 rugoro = 0.0 ! Before phyredem calling, surface modules and values to be saved in startphy.nc ! are initialized !******************************************************************************* dummy = 1.0 pbl_tke(:,:,:) = 1.e-8 zmax0(:) = 40. f0(:) = 1.e-5 sig1(:,:) = 0. w01(:,:) = 0. wake_deltat(:,:) = 0. wake_deltaq(:,:) = 0. wake_s(:) = 0. wake_cstar(:) = 0. wake_fip(:) = 0. wake_pe = 0. fm_therm = 0. entr_therm = 0. detr_therm = 0. CALL fonte_neige_init(run_off_lic_0) CALL pbl_surface_init( fder, snsrf, qsolsrf, tsoil ) CALL phyredem( "startphy.nc" ) ! WRITE(lunout,*)'CCCCCCCCCCCCCCCCCC REACTIVER SORTIE VISU DANS ETAT0' ! WRITE(lunout,*)'entree histclo' CALL histclo() END SUBROUTINE etat0phys_netcdf ! !------------------------------------------------------------------------------- !------------------------------------------------------------------------------- ! SUBROUTINE start_init_orog(lon_in,lat_in,phis,masque) ! !=============================================================================== ! Comment: ! This routine launch grid_noro, which computes parameters for SSO scheme as ! described in LOTT & MILLER (1997) and LOTT(1999). !=============================================================================== USE conf_dat_m, ONLY: conf_dat2d ! USE grid_atob_m, ONLY: rugsoro USE grid_noro_m, ONLY: grid_noro IMPLICIT NONE !------------------------------------------------------------------------------- ! Arguments: REAL, INTENT(IN) :: lon_in(:), lat_in(:) ! dim (iml) (jml) REAL, INTENT(INOUT) :: phis(:,:), masque(:,:) ! dim (iml,jml) !------------------------------------------------------------------------------- ! Local variables: CHARACTER(LEN=256) :: modname="start_init_orog" CHARACTER(LEN=256) :: title="RELIEF" INTEGER :: fid, llm_tmp,ttm_tmp, iml,jml, iml_rel,jml_rel, itau(1) REAL :: lev(1), date, dt REAL, ALLOCATABLE :: lon_rad(:), lon_ini(:), lon_rel(:,:), relief_hi(:,:) REAL, ALLOCATABLE :: lat_rad(:), lat_ini(:), lat_rel(:,:), tmp_var (:,:) REAL, ALLOCATABLE :: zmea0(:,:), zstd0(:,:), zsig0(:,:) REAL, ALLOCATABLE :: zgam0(:,:), zthe0(:,:), zpic0(:,:), zval0(:,:) !------------------------------------------------------------------------------- iml=assert_eq(SIZE(lon_in),SIZE(phis,1),SIZE(masque,1),TRIM(modname)//" iml") jml=assert_eq(SIZE(lat_in),SIZE(phis,2),SIZE(masque,2),TRIM(modname)//" jml") !--- HIGH RESOLUTION OROGRAPHY CALL flininfo(orofname, iml_rel, jml_rel, llm_tmp, ttm_tmp, fid) ALLOCATE(lat_rel(iml_rel,jml_rel),lon_rel(iml_rel,jml_rel)) CALL flinopen(orofname, .FALSE., iml_rel, jml_rel, llm_tmp, lon_rel, lat_rel,& lev, ttm_tmp, itau, date, dt, fid) ALLOCATE(relief_hi(iml_rel,jml_rel)) CALL flinget(fid, title, iml_rel, jml_rel, llm_tmp, ttm_tmp, 1, 1, relief_hi) CALL flinclo(fid) !--- IF ANGLES ARE IN DEGREES, THEY ARE CONVERTED INTO RADIANS ALLOCATE(lon_ini(iml_rel),lat_ini(jml_rel)) lon_ini(:)=lon_rel(:,1); IF(MAXVAL(lon_rel)>pi) lon_ini=lon_ini*deg2rad lat_ini(:)=lat_rel(1,:); IF(MAXVAL(lat_rel)>pi) lat_ini=lat_ini*deg2rad !--- FIELDS ARE PROCESSED TO BE ON STANDARD ANGULAR DOMAINS ALLOCATE(lon_rad(iml_rel),lat_rad(jml_rel)) CALL conf_dat2d(title, lon_ini, lat_ini, lon_rad, lat_rad, relief_hi, .FALSE.) DEALLOCATE(lon_ini,lat_ini) !--- COMPUTING THE REQUIRED FIELDS USING ROUTINE grid_noro WRITE(lunout,*) WRITE(lunout,*)'*** Compute parameters needed for gravity wave drag code ***' !--- ALLOCATIONS OF SUB-CELL SCALES QUANTITIES ALLOCATE(zmea0(iml,jml),zstd0(iml,jml)) !--- Mean orography and std deviation ALLOCATE(zsig0(iml,jml),zgam0(iml,jml)) !--- Slope and nisotropy ALLOCATE(zthe0(iml,jml)) !--- Highest slope orientation ALLOCATE(zpic0(iml,jml),zval0(iml,jml)) !--- Peaks and valley heights !--- CALL OROGRAPHY MODULE TO COMPUTE FIELDS CALL grid_noro(lon_rad,lat_rad,relief_hi,lon_in,lat_in,phis,zmea0,zstd0, & zsig0,zgam0,zthe0,zpic0,zval0,masque) phis = phis * 9.81 phis(iml,:) = phis(1,:) !--- COMPUTE SURFACE ROUGHNESS ! WRITE(lunout,*) ! WRITE(lunout,*)'*** Compute surface roughness induced by the orography ***' ! ALLOCATE(tmp_var(iml-1,jml)) ! CALL rugsoro(lon_rad, lat_rad, relief_hi, lon_in(1:iml-1), lat_in, tmp_var) ! ALLOCATE(rugo(iml,jml)); rugo(1:iml-1,:)=tmp_var; rugo(iml,:)=tmp_var(1,:) ! DEALLOCATE(tmp_var) DEALLOCATE(relief_hi,lon_rad,lat_rad) !--- PUT QUANTITIES TO PHYSICAL GRID CALL gr_dyn_fi(1,iml,jml,klon,zmea0,zmea); DEALLOCATE(zmea0) CALL gr_dyn_fi(1,iml,jml,klon,zstd0,zstd); DEALLOCATE(zstd0) CALL gr_dyn_fi(1,iml,jml,klon,zsig0,zsig); DEALLOCATE(zsig0) CALL gr_dyn_fi(1,iml,jml,klon,zgam0,zgam); DEALLOCATE(zgam0) CALL gr_dyn_fi(1,iml,jml,klon,zthe0,zthe); DEALLOCATE(zthe0) CALL gr_dyn_fi(1,iml,jml,klon,zpic0,zpic); DEALLOCATE(zpic0) CALL gr_dyn_fi(1,iml,jml,klon,zval0,zval); DEALLOCATE(zval0) END SUBROUTINE start_init_orog ! !------------------------------------------------------------------------------- !------------------------------------------------------------------------------- ! SUBROUTINE start_init_phys(lon_in,lat_in,lon_in2,lat_in2,ibar,phis) ! !=============================================================================== ! Purpose: Compute tsol and qsol, knowing phis. !=============================================================================== IMPLICIT NONE !------------------------------------------------------------------------------- ! Arguments: REAL, INTENT(IN) :: lon_in (:), lat_in (:) ! dim (iml) (jml) REAL, INTENT(IN) :: lon_in2(:), lat_in2(:) ! dim (iml) (jml2) LOGICAL, INTENT(IN) :: ibar REAL, INTENT(IN) :: phis(:,:) ! dim (iml,jml) !------------------------------------------------------------------------------- ! Local variables: CHARACTER(LEN=256) :: modname="start_init_phys", physfname="ECPHY.nc" REAL :: date, dt INTEGER :: iml, jml, jml2, itau(1) REAL, ALLOCATABLE :: lon_rad(:), lon_ini(:), var_ana(:,:) REAL, ALLOCATABLE :: lat_rad(:), lat_ini(:) REAL, ALLOCATABLE :: ts(:,:), qs(:,:) !------------------------------------------------------------------------------- iml=assert_eq(SIZE(lon_in),SIZE(phis,1),SIZE(lon_in2),TRIM(modname)//" iml") jml=assert_eq(SIZE(lat_in),SIZE(phis,2), TRIM(modname)//" jml") jml2=SIZE(lat_in2) WRITE(lunout,*)'Opening the surface analysis' CALL flininfo(physfname, iml_phys, jml_phys, llm_phys, ttm_phys, fid_phys) WRITE(lunout,*) 'Values read: ', iml_phys, jml_phys, llm_phys, ttm_phys ALLOCATE(lat_phys(iml_phys,jml_phys),lon_phys(iml_phys,jml_phys)) ALLOCATE(levphys_ini(llm_phys)) CALL flinopen(physfname, .FALSE., iml_phys, jml_phys, llm_phys, & lon_phys,lat_phys,levphys_ini,ttm_phys,itau,date,dt,fid_phys) !--- IF ANGLES ARE IN DEGREES, THEY ARE CONVERTED INTO RADIANS ALLOCATE(lon_ini(iml_phys),lat_ini(jml_phys)) lon_ini(:)=lon_phys(:,1); IF(MAXVAL(lon_phys)>pi) lon_ini=lon_ini*deg2rad lat_ini(:)=lat_phys(1,:); IF(MAXVAL(lat_phys)>pi) lat_ini=lat_ini*deg2rad ALLOCATE(var_ana(iml_phys,jml_phys),lon_rad(iml_phys),lat_rad(jml_phys)) CALL get_var_phys('ST' ,ts) !--- SURFACE TEMPERATURE CALL get_var_phys('CDSW',qs) !--- SOIL MOISTURE CALL flinclo(fid_phys) DEALLOCATE(var_ana,lon_rad,lat_rad,lon_ini,lat_ini) !--- TSOL AND QSOL ON PHYSICAL GRID ALLOCATE(tsol(klon)) CALL gr_dyn_fi(1,iml,jml,klon,ts,tsol) CALL gr_dyn_fi(1,iml,jml,klon,qs,qsol) DEALLOCATE(ts,qs) CONTAINS !------------------------------------------------------------------------------- ! SUBROUTINE get_var_phys(title,field) ! !------------------------------------------------------------------------------- USE conf_dat_m, ONLY: conf_dat2d IMPLICIT NONE !------------------------------------------------------------------------------- ! Arguments: CHARACTER(LEN=*), INTENT(IN) :: title REAL, ALLOCATABLE, INTENT(INOUT) :: field(:,:) !------------------------------------------------------------------------------- ! Local variables: INTEGER :: tllm !------------------------------------------------------------------------------- SELECT CASE(title) CASE('SP'); tllm=0 CASE('ST','CDSW'); tllm=llm_phys END SELECT IF(ALLOCATED(field)) RETURN ALLOCATE(field(iml,jml)); field(:,:)=0. CALL flinget(fid_phys,title,iml_phys,jml_phys,tllm,ttm_phys,1,1,var_ana) CALL conf_dat2d(title, lon_ini, lat_ini, lon_rad, lat_rad, var_ana, ibar) CALL interp_startvar(title, ibar, .TRUE., lon_rad, lat_rad, var_ana, & lon_in, lat_in, lon_in2, lat_in2, field) END SUBROUTINE get_var_phys ! !------------------------------------------------------------------------------- ! END SUBROUTINE start_init_phys ! !------------------------------------------------------------------------------- !------------------------------------------------------------------------------- ! SUBROUTINE interp_startvar(nam,ibar,ibeg,lon,lat,vari,lon1,lat1,lon2,lat2,varo) ! !------------------------------------------------------------------------------- USE inter_barxy_m, ONLY: inter_barxy USE grid_atob_m, ONLY: grille_m IMPLICIT NONE !------------------------------------------------------------------------------- ! Arguments: CHARACTER(LEN=*), INTENT(IN) :: nam LOGICAL, INTENT(IN) :: ibar, ibeg REAL, INTENT(IN) :: lon(:), lat(:) ! dim (ii) (jj) REAL, INTENT(IN) :: vari(:,:) ! dim (ii,jj) REAL, INTENT(IN) :: lon1(:), lat1(:) ! dim (i1) (j1) REAL, INTENT(IN) :: lon2(:), lat2(:) ! dim (i1) (j2) REAL, INTENT(OUT) :: varo(:,:) ! dim (i1) (j1) !------------------------------------------------------------------------------- ! Local variables: CHARACTER(LEN=256) :: modname="interp_startvar" INTEGER :: ii, jj, i1, j1, j2 REAL, ALLOCATABLE :: vtmp(:,:) !------------------------------------------------------------------------------- ii=assert_eq(SIZE(lon), SIZE(vari,1),TRIM(modname)//" ii") jj=assert_eq(SIZE(lat), SIZE(vari,2),TRIM(modname)//" jj") i1=assert_eq(SIZE(lon1),SIZE(lon2),SIZE(varo,1),TRIM(modname)//" i1") j1=assert_eq(SIZE(lat1), SIZE(varo,2),TRIM(modname)//" j1") j2=SIZE(lat2) ALLOCATE(vtmp(i1-1,j1)) IF(ibar) THEN IF(ibeg.AND.prt_level>1) THEN WRITE(lunout,*)"--------------------------------------------------------" WRITE(lunout,*)"$$$ Interpolation barycentrique pour "//TRIM(nam)//" $$$" WRITE(lunout,*)"--------------------------------------------------------" END IF CALL inter_barxy(lon, lat(:jj-1), vari, lon2(:i1-1), lat2, vtmp) ELSE CALL grille_m (lon, lat, vari, lon1, lat1, vtmp) END IF CALL gr_int_dyn(vtmp, varo, i1-1, j1) END SUBROUTINE interp_startvar ! !------------------------------------------------------------------------------- END MODULE etat0phys ! !*******************************************************************************