Changeset 5216 for LMDZ6/trunk


Ignore:
Timestamp:
Sep 23, 2024, 12:42:02 PM (3 months ago)
Author:
dcugnet
Message:
  • Remove INCA retro-compatibility with "traceur.def" (containing only water tracers but getting chemical species from an internal INCA routine).
  • Introduce in dynamics a "is_master" variable that works also in sequential mode. It allows to avoid repeating messages for each process and task.
Location:
LMDZ6/trunk/libf
Files:
2 edited

Legend:

Unmodified
Added
Removed

  • LMDZ6/trunk/libf/dyn3d_common/infotrac.F90

    r5199 r5216  
    33MODULE infotrac
    44
    5    USE       strings_mod, ONLY: msg, fmsg, maxlen, cat, dispTable, int2str, bool2str, strStack, strParse
    6    USE readTracFiles_mod, ONLY: trac_type, readTracersFiles, tracers, setGeneration, itZonIso, nzone, tran0, isoZone, &
    7         delPhase, niso, getKey, isot_type, processIsotopes,  isotope, maxTableWidth, iqIsoPha, nphas, ixIso, isoPhas, &
    8         addPhase, iH2O, addKey, isoSelect, testTracersFiles, isoKeys, indexUpdate,  iqWIsoPha, nbIso, ntiso, isoName, isoCheck
     5   USE       strings_mod, ONLY: msg, maxlen, cat, dispTable, int2str, bool2str, strStack, strParse, strCount
     6   USE readTracFiles_mod, ONLY: readTracersFiles, maxTableWidth, isot_type, addPhase, addKey, iH2O, &
     7        indexUpdate, trac_type, testTracersFiles, processIsotopes, tracers, delPhase, getKey, tran0, &
     8        isoKeys, isoName, isoZone, isoPhas, isoSelect, itZonIso, nbIso, isotope, & 
     9           niso,   ntiso,   nzone,   nphas,            iqIsoPha, ixIso, isoCheck
    910   USE readTracFiles_mod, ONLY: new2oldH2O, newHNO3, oldHNO3
     11
    1012   IMPLICIT NONE
    1113
    … …  
    3032   PUBLIC :: isoKeys, isoName, isoZone, isoPhas            !--- Isotopes keys & names, tagging zones names, phases
    3133   PUBLIC ::    niso,   ntiso,   nzone,   nphas            !--- Number of   "   "
    32    PUBLIC :: itZonIso                                      !--- index "it" in "isoName(1:niso)" = f(tagging idx, isotope idx)
    33    PUBLIC :: iqIsoPha                                      !--- index "iq" in "qx"              = f(isotope idx,   phase idx)
     34   PUBLIC :: itZonIso                                      !--- Index "it" in "isoName(1:niso)" = f(tagging idx, isotope idx)
     35   PUBLIC :: iqIsoPha                                      !--- Index "iq" in "qx"              = f(isotope idx,   phase idx)
    3436   PUBLIC :: isoCheck                                      !--- Run isotopes checking routines
    3537   !=== FOR BOTH TRACERS AND ISOTOPES
    … …  
    118120SUBROUTINE init_infotrac
    119121   USE control_mod, ONLY: planet_type
     122#ifdef CPP_PARA
     123   USE parallel_lmdz, ONLY: is_master
     124#endif
    120125#ifdef REPROBUS
    121126   USE CHEM_REP, ONLY: Init_chem_rep_trac
    … …  
    153158   INTEGER :: nqINCA
    154159#endif
     160#ifndef CPP_PARA
     161   LOGICAL               :: is_master=.TRUE.
     162#endif
    155163   CHARACTER(LEN=2)      ::   suff(9)                                !--- Suffixes for schemes of order 3 or 4 (Prather)
    156164   CHARACTER(LEN=3)      :: descrq(30)                               !--- Advection scheme description tags
    157    CHARACTER(LEN=maxlen) :: msg1, texp, ttp                          !--- Strings for messages and expanded tracers type
     165   CHARACTER(LEN=maxlen) :: msg1, texp, ttp, nam, val                !--- Strings for messages and expanded tracers type
    158166   INTEGER :: fType                                                  !--- Tracers description file type ; 0: none
    159167                                                                     !--- 1/2/3: "traceur.def"/"tracer.def"/"tracer_*.def"
    160168   INTEGER :: nqtrue                                                 !--- Tracers nb from tracer.def (no higher order moments)
    161169   INTEGER :: iad                                                    !--- Advection scheme number
    162    INTEGER :: iq, jq, nt, im, nm                                     !--- Indexes and temporary variables
     170   INTEGER :: iq, jq, nt, im, nm, ig                                 !--- Indexes and temporary variables
    163171   LOGICAL :: lerr, ll
    164172   TYPE(trac_type), ALLOCATABLE, TARGET :: ttr(:)
    … …  
    175183   descrq(30)    =  'PRA'
    176184
    177    lerr=strParse(type_trac, '|', types_trac, n=nt)
    178    IF (nt .GT. 1) THEN
    179       IF (nt .GT. 2) CALL abort_gcm(modname, 'you need to modify type_trac, this version is not supported by lmdz', 1)
    180       IF (nt .EQ. 2) type_trac=types_trac(2)
    181    ENDIF
     185   CALL msg('type_trac = "'//TRIM(type_trac)//'"', modname, is_master)
     186   IF(strCount(type_trac, '|', nt)) CALL abort_gcm(modname, 'Could''nt parse the "type_trac" string with delimiter "|"', 1)
     187   IF(nt >= 3) CALL abort_gcm(modname, 'you need to modify type_trac, this version is not supported by lmdz', 1)
     188   IF(strParse(type_trac, '|', types_trac, n=nt)) CALL abort_gcm(modname, "couldn't parse "//'"type_trac"', 1)
     189   IF(nt == 2) type_trac = types_trac(2) ! TO BE DELETED SOON
    182190
    183191   CALL msg('type_trac = "'//TRIM(type_trac)//'"', modname)
    184192
    185    
     193!##############################################################################################################################
     194   IF(is_master) THEN                                                !=== SKIPED IF ALREADY DONE
     195!##############################################################################################################################
    186196   !--- MESSAGE ABOUT THE CHOSEN CONFIGURATION
    187197   msg1 = 'For type_trac = "'//TRIM(type_trac)//'":'
    … …  
    211221#endif
    212222   END SELECT
    213 
    214    nqCO2 = COUNT( [type_trac == 'inco', type_trac == 'co2i'] )
     223!##############################################################################################################################
     224   END IF
     225!##############################################################################################################################
    215226
    216227!==============================================================================================================================
    … …  
    222233   IF(testTracersFiles(modname, texp, fType, .TRUE.)) CALL abort_gcm(modname, 'problem with tracers file(s)',1)
    223234   ttp = type_trac; IF(fType /= 1) ttp = texp
    224    IF(readTracersFiles(ttp, lRepr=type_trac=='repr')) CALL abort_gcm(modname, 'problem with tracers file(s)',1)
    225 
    226 !==============================================================================================================================
    227 ! 1) Get various numbers: "nqtrue" (first order only tracers), "nqo" (water phases), 'nbtr' (tracers passed to physics), etc.
    228 !==============================================================================================================================
    229235   !---------------------------------------------------------------------------------------------------------------------------
    230236   IF(fType == 0) CALL abort_gcm(modname, 'Missing "traceur.def", "tracer.def" or "tracer_<keyword>.def tracers file.',1)
    231237   !---------------------------------------------------------------------------------------------------------------------------
    232    IF(fType == 1 .AND. ANY(['inca', 'inco'] == type_trac)) THEN      !=== FOUND OLD STYLE INCA "traceur.def"
     238   IF(fType == 1 .AND. ANY(['inca', 'inco'] == type_trac)) &                   !=== FOUND OLD STYLE INCA "traceur.def"
     239      CALL abort_gcm(modname, 'retro-compatibility with old-style INCA traceur.def files has been disabled.', 1)
    233240   !---------------------------------------------------------------------------------------------------------------------------
    234 #ifdef INCA
    235       nqo = SIZE(tracers) - nqCO2
    236       CALL Init_chem_inca_trac(nqINCA)                               !--- Get nqINCA from INCA
    237       nbtr = nqINCA + nqCO2                                          !--- Number of tracers passed to phytrac
    238       nqtrue = nbtr + nqo                                            !--- Total number of "true" tracers
    239       IF(ALL([2,3] /= nqo)) CALL abort_gcm(modname, 'Only 2 or 3 water phases allowed ; found nqo='//TRIM(int2str(nqo)), 1)
    240       ALLOCATE(hadv(nqtrue), hadv_inca(nqINCA), conv_flg_inca(nqINCA), solsym_inca(nqINCA))
    241       ALLOCATE(vadv(nqtrue), vadv_inca(nqINCA),  pbl_flg_inca(nqINCA))
    242       CALL init_transport(solsym_inca, conv_flg_inca, pbl_flg_inca, hadv_inca, vadv_inca)
    243       ALLOCATE(ttr(nqtrue))
    244       ttr(1:nqo+nqCO2)                  = tracers
    245       ttr(1    :      nqo   )%component = 'lmdz'
    246       ttr(1+nqo:nqCO2+nqo   )%component = 'co2i'
    247       ttr(1+nqo+nqCO2:nqtrue)%component = 'inca'
    248       ttr(1+nqo      :nqtrue)%name      = [('CO2     ', iq=1, nqCO2), solsym_inca]
    249       ttr(1+nqo+nqCO2:nqtrue)%parent    = tran0
    250       ttr(1+nqo+nqCO2:nqtrue)%phase     = 'g'
    251       lerr = getKey('hadv', had, ky=tracers(:)%keys)
    252       lerr = getKey('vadv', vad, ky=tracers(:)%keys)
    253       hadv(1:nqo+nqCO2) = had(:); hadv(1+nqo+nqCO2:nqtrue) = hadv_inca
    254       vadv(1:nqo+nqCO2) = vad(:); vadv(1+nqo+nqCO2:nqtrue) = vadv_inca
    255       CALL MOVE_ALLOC(FROM=ttr, TO=tracers)
    256       DO iq = 1, nqtrue
    257          t1 => tracers(iq)
    258          CALL addKey('name',      t1%name,      t1%keys)
    259          CALL addKey('component', t1%component, t1%keys)
    260          CALL addKey('parent',    t1%parent,    t1%keys)
    261          CALL addKey('phase',     t1%phase,     t1%keys)
    262       END DO
    263       IF(setGeneration(tracers)) CALL abort_gcm(modname,'See above',1) !- SET FIELDS %iGeneration, %gen0Name
    264       DEALLOCATE(had, hadv_inca, vad, vadv_inca, conv_flg_inca, pbl_flg_inca, solsym_inca)
    265 #endif
    266    !---------------------------------------------------------------------------------------------------------------------------
    267    ELSE                                                              !=== OTHER CASES (OLD OR NEW FORMAT, NO INCA MODULE)
    268    !---------------------------------------------------------------------------------------------------------------------------
     241
     242   IF(readTracersFiles(ttp, lRepr=type_trac == 'repr')) CALL abort_gcm(modname, 'problem with tracers file(s)',1)
     243
     244!==============================================================================================================================
     245! 1) Get various numbers: "nqtrue" (first order only tracers), "nqo" (water phases), 'nbtr' (tracers passed to physics), etc.
     246!==============================================================================================================================
    269247   nqtrue = SIZE(tracers)                                                                               !--- "true" tracers
    270248   nqo    =      COUNT(tracers(:)%component == 'lmdz' .AND. delPhase(tracers(:)%name)     == 'H2O')     !--- Water phases
    … …  
    274252   nqINCA =      COUNT(tracers(:)%component == 'inca')
    275253#endif
     254#ifdef REPROBUS
     255   CALL Init_chem_rep_trac(nbtr, nqo, tracers(:)%name)                         !--- Transfert the number of tracers to Reprobus
     256#endif
     257
     258!==============================================================================================================================
     259! 2) Calculate nqtot, number of tracers needed (greater if advection schemes 20 or 30 have been chosen).
     260!==============================================================================================================================
    276261   IF(getKey('hadv', hadv, ky=tracers(:)%keys)) CALL abort_gcm(modname, 'missing key "hadv"', 1)
    277262   IF(getKey('vadv', vadv, ky=tracers(:)%keys)) CALL abort_gcm(modname, 'missing key "vadv"', 1)
    278    !---------------------------------------------------------------------------------------------------------------------------
    279    END IF
    280    !---------------------------------------------------------------------------------------------------------------------------
    281 
    282 #ifdef REPROBUS
    283    CALL Init_chem_rep_trac(nbtr, nqo, tracers(:)%name)
    284 #endif
    285 
    286 !==============================================================================================================================
    287 ! 2) Calculate nqtot, number of tracers needed (greater if advection schemes 20 or 30 have been chosen).
    288 !==============================================================================================================================
    289263   DO iq = 1, nqtrue
    290264      IF( hadv(iq)<20 .OR. (ANY(hadv(iq)==[20,30]) .AND. hadv(iq)==vadv(iq)) ) CYCLE
    … …  
    361335
    362336   !=== TEST ADVECTION SCHEME
    363    DO iq = 1, nqtot ; t1 => tracers(iq); iad = t1%iadv
     337   DO iq = 1, nqtot ; t1 => tracers(iq)
     338      iad = t1%iadv
     339      ig  = t1%iGeneration
     340      nam = t1%name
     341      val = 'iadv='//TRIM(int2str(iad))
    364342
    365343      !--- ONLY TESTED VALUES FOR TRACERS FOR NOW:               iadv = 14, 10 (and 0 for non-transported tracers)
    366       IF(ALL([10,14,0] /= iad)) &
    367          CALL abort_gcm(modname, 'Not tested for iadv='//TRIM(int2str(iad))//' ; 10 or 14 only are allowed !', 1)
    368 
    369       !--- ONLY TESTED VALUES FOR PARENTS HAVING CHILDS FOR NOW: iadv = 14, 10 (PARENTS: TRACERS OF GENERATION 1)
    370       IF(ALL([10,14] /= iad) .AND. t1%iGeneration == 1 .AND. ANY(tracers(:)%iGeneration > 1)) &
    371          CALL abort_gcm(modname, 'iadv='//TRIM(int2str(iad))//' not implemented for parents ; 10 or 14 only are allowed !', 1)
    372 
    373       !--- ONLY TESTED VALUES FOR CHILDS FOR NOW:                iadv = 10     (CHILDS:  TRACERS OF GENERATION GREATER THAN 1)
    374       IF(fmsg('WARNING ! iadv='//TRIM(int2str(iad))//' not implemented for childs. Setting iadv=10 for "'//TRIM(t1%name)//'"',&
    375          modname, iad /= 10 .AND. t1%iGeneration > 1)) t1%iadv = 10
    376 
    377       !--- ONLY VALID SCHEME NUMBER FOR WATER VAPOUR:            iadv = 14
    378       ll = t1%name /= addPhase('H2O','g')
    379       IF(fmsg('WARNING ! iadv=14 is valid for water vapour only. Setting iadv=10 for "'//TRIM(t1%name)//'".', &
    380          modname, iad == 14 .AND. ll))                 t1%iadv = 10
     344      IF(ALL([10,14,0] /= iad)) CALL abort_gcm(modname, TRIM(val)//' has not been tested yet ; 10 or 14 only are allowed !', 1)
     345
     346      !--- ONLY TESTED VALUES SO FAR FOR PARENTS HAVING CHILDREN: iadv = 14, 10 (PARENTS: TRACERS OF GENERATION 0)
     347      IF(ALL([10,14] /= iad) .AND. ig == 0 .AND. ANY(tracers(:)%parent==nam)) &
     348         CALL abort_gcm(modname, TRIM(val)//' is not implemented for parents ; 10 or 14 only are allowed !', 1)
     349
     350      !--- ONLY TESTED VALUES SO FAR FOR DESCENDANTS (TRACERS OF GENERATION > 0): iadv = 10 ; WATER VAPOUR: iadv = 14
     351      lerr = iad /= 10 .AND. ig > 0;                     IF(lerr) tracers(iq)%iadv = 10
     352      CALL msg('WARNING! '//TRIM(val)//  ' not implemented for children. Setting iadv=10 for "'//TRIM(nam)//'"', modname, lerr)
     353      lerr = iad == 14 .AND. nam /= addPhase('H2O','g'); IF(lerr) tracers(iq)%iadv = 10
     354      CALL msg('WARNING! '//TRIM(val)//' is valid for water vapour only. Setting iadv=10 for "'//TRIM(nam)//'"', modname, lerr)
    381355   END DO
    382356
    … …  
    386360
    387361   !--- Convection / boundary layer activation for all tracers
    388    ALLOCATE(conv_flg(nbtr)); conv_flg(1:nbtr) = 1
    389    ALLOCATE( pbl_flg(nbtr));  pbl_flg(1:nbtr) = 1
     362   IF(.NOT.ALLOCATED(conv_flg)) ALLOCATE(conv_flg(nbtr)); conv_flg(1:nbtr) = 1
     363   IF(.NOT.ALLOCATED( pbl_flg)) ALLOCATE( pbl_flg(nbtr));  pbl_flg(1:nbtr) = 1
    390364
    391365   !--- Note: nqtottr can differ from nbtr when nmom/=0
    … …  
    395369
    396370   !=== DISPLAY THE RESULTS
     371   IF(.NOT.is_master) RETURN
    397372   CALL msg('nqo    = '//TRIM(int2str(nqo)),    modname)
    398373   CALL msg('nbtr   = '//TRIM(int2str(nbtr)),   modname)
    … …  
    413388                  t%iso_iName, t%iso_iZone, t%iso_iPhase), nColMax=maxTableWidth, nHead=2, sub=modname))   &
    414389      CALL abort_gcm(modname, "problem with the tracers table content", 1)
    415    IF(niso > 0) THEN
    416       CALL msg('Where, for isotopes family "'//TRIM(isotope%parent)//'":', modname)
     390   CALL msg('No isotopes identified.', modname, nbIso == 0)
     391   IF(nbIso == 0) RETURN
     392      CALL msg('For isotopes family "H2O":', modname)
    417393      CALL msg('  isoKeys%name = '//strStack(isoKeys%name), modname)
    418       CALL msg('  isoName = '//strStack(isoName),      modname)
    419       CALL msg('  isoZone = '//strStack(isoZone),      modname)
    420       CALL msg('  isoPhas = '//TRIM(isoPhas),          modname)
    421    ELSE
    422       CALL msg('No isotopes identified.', modname)
    423    END IF
    424    CALL msg('end', modname)
     394      CALL msg('  isoName = '//strStack(isoName),  modname)
     395      CALL msg('  isoZone = '//strStack(isoZone),  modname)
     396      CALL msg('  isoPhas = '//    TRIM(isoPhas),  modname)
    425397
    426398END SUBROUTINE init_infotrac

  • LMDZ6/trunk/libf/phylmd/infotrac_phy.F90

    r5200 r5216  
    33MODULE infotrac_phy
    44
    5    USE       strings_mod, ONLY: msg, fmsg, maxlen, cat, dispTable, int2str, bool2str, strStack, strParse, strIdx
    6    USE readTracFiles_mod, ONLY: trac_type, readTracersFiles, tracers, setGeneration, itZonIso, nzone, tran0, isoZone, &
    7         delPhase, niso, getKey, isot_type, processIsotopes,  isotope, maxTableWidth, iqIsoPha, nphas, ixIso, isoPhas, &
    8         addPhase, iH2O, addKey, isoSelect, testTracersFiles, isoKeys, indexUpdate,  iqWIsoPha, nbIso, ntiso, isoName, isoCheck
     5   USE       strings_mod, ONLY: msg, maxlen, cat, dispTable, int2str, bool2str, strStack, strParse, strCount, strIdx
     6   USE readTracFiles_mod, ONLY: readTracersFiles, maxTableWidth, isot_type, addPhase, addKey, iH2O, &
     7        indexUpdate, trac_type, testTracersFiles, processIsotopes, tracers, delPhase, getKey, tran0, &
     8        isoKeys, isoName, isoZone, isoPhas, isoSelect, itZonIso, nbIso, isotope, & 
     9           niso,   ntiso,   nzone,   nphas, iqWIsoPha, iqIsoPha, ixIso, isoCheck
    910   USE readTracFiles_mod, ONLY: new2oldH2O
    1011   IMPLICIT NONE
    … …  
    135136SUBROUTINE init_infotrac_phy
    136137   USE ioipsl_getin_p_mod, ONLY: getin_p
     138   USE mod_phys_lmdz_para, ONLY: is_master, is_omp_master
    137139#ifdef REPROBUS
    138140   USE CHEM_REP, ONLY: Init_chem_rep_trac
    … …  
    196198
    197199   CALL getin_p('type_trac',type_trac)
    198 
    199    lerr=strParse(type_trac, '|', types_trac, n=nt)
    200    IF (nt .GT. 1) THEN
    201       IF (nt .GT. 2) CALL abort_physic(modname, 'you need to modify type_trac, this version is not supported by lmdz', 1)
    202       IF (nt .EQ. 2) type_trac=types_trac(2)
    203    ENDIF
     200   CALL msg('type_trac = "'//TRIM(type_trac)//'"', modname, is_master)
     201   IF(strCount(type_trac, '|', nt)) CALL abort_physic(modname, 'Could''nt parse the "type_trac" string with delimiter "|"', 1)
     202   IF(nt >= 3) CALL abort_physic(modname, 'you need to modify type_trac, this version is not supported by lmdz', 1)
     203   IF(strParse(type_trac, '|', types_trac, n=nt)) CALL abort_physic(modname, "couldn't parse "//'"type_trac"', 1)
     204   IF(nt == 2) type_trac = types_trac(2) ! TO BE DELETED SOON
    204205
    205206   CALL msg('type_trac = "'//TRIM(type_trac)//'"', modname)
    … …  
    207208
    208209!##############################################################################################################################
    209    IF(lInit) THEN                                                    !=== SKIPED IF ALREADY DONE IN dyn3d_common/infotrac  ####
     210   IF(lInit .AND. is_master) THEN                                    !=== SKIPED IF ALREADY DONE
    210211!##############################################################################################################################
    211212   !--- MESSAGE ABOUT THE CHOSEN CONFIGURATION
    … …  
    240241!##############################################################################################################################
    241242
    242    nqCO2 = COUNT( [type_trac == 'inco', type_trac == 'co2i'] )
    243 
    244243!==============================================================================================================================
    245244! 0) DETERMINE THE TYPE OF THE INPUT TRACERS DESCRIPTION FILE AND READ IT
    … …  
    248247   IF(texp == 'inco') texp = 'co2i|inca'
    249248   IF(texp /= 'lmdz') texp = 'lmdz|'//TRIM(texp)
    250    IF(testTracersFiles(modname, texp, fType, lInit)) CALL abort_physic(modname, 'problem with tracers file(s)',1)
     249   IF(testTracersFiles(modname, texp, fType, lInit.AND.is_master)) CALL abort_physic(modname, 'problem with tracers file(s)',1)
    251250   ttp = type_trac; IF(fType /= 1) ttp = texp
    252 
    253 !##############################################################################################################################
    254    IF(lInit) THEN
    255       IF(readTracersFiles(ttp, lRepr=type_trac=='repr')) CALL abort_physic(modname, 'problem with tracers file(s)',1)
    256    ELSE
    257       CALL msg('No tracers description file(s) reading needed: already done in the dynamics', modname)
    258    END IF
    259 !##############################################################################################################################
    260 
    261 !==============================================================================================================================
    262 ! 1) Get various numbers: "nqtrue" (first order only tracers), "nqo" (water phases), 'nbtr' (tracers passed to physics), etc.
    263 !==============================================================================================================================
    264251   !---------------------------------------------------------------------------------------------------------------------------
    265252   IF(fType == 0) CALL abort_physic(modname, 'Missing "traceur.def", "tracer.def" or "tracer_<keyword>.def tracers file.',1)
    266253   !---------------------------------------------------------------------------------------------------------------------------
    267    IF(fType == 1 .AND. ANY(['inca', 'inco'] == type_trac) .AND. lInit) THEN  !=== FOUND OLD STYLE INCA "traceur.def"
     254   IF(fType == 1 .AND. ANY(['inca', 'inco'] == type_trac)) &                   !=== FOUND OLD STYLE INCA "traceur.def"
     255      CALL abort_physic(modname, 'retro-compatibility with old-style INCA traceur.def files has been disabled.', 1)
    268256   !---------------------------------------------------------------------------------------------------------------------------
    269 #ifdef INCA
    270       nqo = SIZE(tracers) - nqCO2
    271       CALL Init_chem_inca_trac(nqINCA)                               !--- Get nqINCA from INCA
    272       nbtr = nqINCA + nqCO2                                          !--- Number of tracers passed to phytrac
    273       nqtrue = nbtr + nqo                                            !--- Total number of "true" tracers
    274       IF(ALL([2,3] /= nqo)) CALL abort_physic(modname, 'Only 2 or 3 water phases allowed ; found nqo='//TRIM(int2str(nqo)), 1)
    275       ALLOCATE(hadv(nqtrue), hadv_inca(nqINCA), conv_flg_inca(nqINCA), solsym_inca(nqINCA))
    276       ALLOCATE(vadv(nqtrue), vadv_inca(nqINCA),  pbl_flg_inca(nqINCA))
    277       CALL init_transport(solsym_inca, conv_flg_inca, pbl_flg_inca, hadv_inca, vadv_inca)
    278       ALLOCATE(ttr(nqtrue))
    279       ttr(1:nqo+nqCO2)                  = tracers
    280       ttr(1    :      nqo   )%component = 'lmdz'
    281       ttr(1+nqo:nqCO2+nqo   )%component = 'co2i'
    282       ttr(1+nqo+nqCO2:nqtrue)%component = 'inca'
    283       ttr(1+nqo      :nqtrue)%name      = [('CO2     ', iq=1, nqCO2), solsym_inca]
    284       ttr(1+nqo+nqCO2:nqtrue)%parent    = tran0
    285       ttr(1+nqo+nqCO2:nqtrue)%phase     = 'g'
    286       lerr = getKey('hadv', had, ky=tracers(:)%keys)
    287       lerr = getKey('vadv', vad, ky=tracers(:)%keys)
    288       hadv(1:nqo+nqCO2) = had(:); hadv(1+nqo+nqCO2:nqtrue) = hadv_inca
    289       vadv(1:nqo+nqCO2) = vad(:); vadv(1+nqo+nqCO2:nqtrue) = vadv_inca
    290       CALL MOVE_ALLOC(FROM=ttr, TO=tracers)
    291       DO iq = 1, nqtrue
    292          t1 => tracers(iq)
    293          CALL addKey('name',      t1%name,      t1%keys)
    294          CALL addKey('component', t1%component, t1%keys)
    295          CALL addKey('parent',    t1%parent,    t1%keys)
    296          CALL addKey('phase',     t1%phase,     t1%keys)
    297       END DO
    298       IF(setGeneration(tracers)) CALL abort_physic(modname,'See below',1) !- SET FIELDS %iGeneration, %gen0Name
    299       DEALLOCATE(had, hadv_inca, vad, vadv_inca, conv_flg_inca, pbl_flg_inca, solsym_inca)
    300 #endif
    301    !---------------------------------------------------------------------------------------------------------------------------
    302    ELSE                                                              !=== OTHER CASES (OLD OR NEW FORMAT, NO INCA MODULE)
    303    !---------------------------------------------------------------------------------------------------------------------------
     257
     258!##############################################################################################################################
     259   IF(lInit) THEN
     260      IF(readTracersFiles(ttp, lRepr=type_trac == 'repr')) CALL abort_physic(modname, 'problem with tracers file(s)',1)
     261   END IF
     262   CALL msg('No tracers description file(s) reading needed: already done', modname, .NOT.lInit.AND.is_master)
     263!##############################################################################################################################
     264
     265!==============================================================================================================================
     266! 1) Get various numbers: "nqtrue" (first order only tracers), "nqo" (water phases), 'nbtr' (tracers passed to physics), etc.
     267!==============================================================================================================================
    304268   nqtrue = SIZE(tracers)                                                                               !--- "true" tracers
    305269   nqo    =      COUNT(tracers(:)%component == 'lmdz' .AND. delPhase(tracers(:)%name)     == 'H2O')     !--- Water phases
    … …  
    309273   nqINCA =      COUNT(tracers(:)%component == 'inca')
    310274#endif
     275#ifdef REPROBUS
     276   CALL Init_chem_rep_trac(nbtr, nqo, tracers(:)%name)                         !--- Transfert the number of tracers to Reprobus
     277#endif
     278
     279!##############################################################################################################################
     280   IF(lInit) THEN                                                    !=== SKIPED IF ALREADY DONE IN dyn3d_common/infotrac  ####
     281!##############################################################################################################################
     282
     283!==============================================================================================================================
     284! 2) Calculate nqtot, number of tracers needed (greater if advection schemes 20 or 30 have been chosen).
     285!==============================================================================================================================
    311286   IF(getKey('hadv', hadv, ky=tracers(:)%keys)) CALL abort_physic(modname, 'missing key "hadv"', 1)
    312287   IF(getKey('vadv', vadv, ky=tracers(:)%keys)) CALL abort_physic(modname, 'missing key "vadv"', 1)
    313    !---------------------------------------------------------------------------------------------------------------------------
    314    END IF
    315    !---------------------------------------------------------------------------------------------------------------------------
    316 
    317 #ifdef REPROBUS
    318    CALL Init_chem_rep_trac(nbtr, nqo, tracers(:)%name)                         !--- Transfert the number of tracers to Reprobus
    319 #endif
    320 
    321 !##############################################################################################################################
    322    IF(lInit) THEN                                                    !=== SKIPED IF ALREADY DONE IN dyn3d_common/infotrac  ####
    323 !##############################################################################################################################
    324 
    325 !==============================================================================================================================
    326 ! 2) Calculate nqtot, number of tracers needed (greater if advection schemes 20 or 30 have been chosen).
    327 !==============================================================================================================================
    328288   DO iq = 1, nqtrue
    329289      IF( hadv(iq)<20 .OR. (ANY(hadv(iq)==[20,30]) .AND. hadv(iq)==vadv(iq)) ) CYCLE
    … …  
    412372
    413373   !=== DISPLAY THE RESULTS
     374   IF(.NOT.is_master) RETURN
    414375   CALL msg('nqo    = '//TRIM(int2str(nqo)),    modname)
    415376   CALL msg('nbtr   = '//TRIM(int2str(nbtr)),   modname)
    … …  
    431392                  t%iso_iName, t%iso_iZone, t%iso_iPhase), nColMax=maxTableWidth, nHead=2, sub=modname))   &
    432393      CALL abort_physic(modname, "problem with the tracers table content", 1)
    433    IF(niso > 0) THEN
    434       CALL msg('Where, for isotopes family "'//TRIM(isotope%parent)//'":', modname)
     394   CALL msg('No isotopes identified.', modname, nbIso == 0)
     395   IF(nbIso == 0) RETURN
     396      CALL msg('For isotopes family "H2O":', modname)
    435397      CALL msg('  isoKeys%name = '//strStack(isoKeys%name), modname)
    436       CALL msg('  isoName = '//strStack(isoName),      modname)
    437       CALL msg('  isoZone = '//strStack(isoZone),      modname)
    438       CALL msg('  isoPhas = '//TRIM(isoPhas),          modname)
    439    ELSE
    440       CALL msg('No isotopes identified.', modname)
    441    END IF
     398      CALL msg('  isoName = '//strStack(isoName),  modname)
     399      CALL msg('  isoZone = '//strStack(isoZone),  modname)
     400      CALL msg('  isoPhas = '//    TRIM(isoPhas),  modname)
    442401
    443402#ifdef ISOVERIF
    … …  
    463422   END IF
    464423#endif
    465    CALL msg('end', modname)
    466424
    467425END SUBROUTINE init_infotrac_phy
Note: See TracChangeset for help on using the changeset viewer.