Index: LMDZ6/branches/Ocean_skin/libf/phylmd/dyn1d/lmdz1d.F90
===================================================================
--- LMDZ6/branches/Ocean_skin/libf/phylmd/dyn1d/lmdz1d.F90	(revision 3428)
+++ LMDZ6/branches/Ocean_skin/libf/phylmd/dyn1d/lmdz1d.F90	(revision 3605)
@@ -1,2 +1,5 @@
+!
+! $Id$
+!
 !#ifdef CPP_1D
 !#include "../dyn3d/mod_const_mpi.F90"
@@ -6,1271 +9,20 @@
 
 
-      PROGRAM lmdz1d
+   PROGRAM lmdz1d
 
-   USE ioipsl, only: ju2ymds, ymds2ju, ioconf_calendar
-   USE phys_state_var_mod, ONLY : phys_state_var_init, phys_state_var_end, &
-       clwcon, detr_therm, &
-       qsol, fevap, z0m, z0h, agesno, &
-       du_gwd_rando, du_gwd_front, entr_therm, f0, fm_therm, &
-       falb_dir, falb_dif, &
-       ftsol, pbl_tke, pctsrf, radsol, rain_fall, snow_fall, ratqs, &
-       rnebcon, rugoro, sig1, w01, solaire_etat0, sollw, sollwdown, &
-       solsw, t_ancien, q_ancien, u_ancien, v_ancien, wake_cstar, &
-       wake_delta_pbl_TKE, delta_tsurf, wake_fip, wake_pe, &
-       wake_deltaq, wake_deltat, wake_s, wake_dens, &
-       zgam, zmax0, zmea, zpic, zsig, &
-       zstd, zthe, zval, ale_bl, ale_bl_trig, alp_bl, ql_ancien, qs_ancien, &
-       prlw_ancien, prsw_ancien, prw_ancien
-  
-   USE dimphy
-   USE surface_data, only : type_ocean,ok_veget
-   USE pbl_surface_mod, only : ftsoil, pbl_surface_init, &
-                                 pbl_surface_final
-   USE fonte_neige_mod, only : fonte_neige_init, fonte_neige_final 
+   USE ioipsl, only: getin
 
-   USE infotrac ! new
-   USE control_mod
-   USE indice_sol_mod
-   USE phyaqua_mod
-!  USE mod_1D_cases_read
-   USE mod_1D_cases_read2
-   USE mod_1D_amma_read
-   USE print_control_mod, ONLY: lunout, prt_level
-   USE iniphysiq_mod, ONLY: iniphysiq
-   USE mod_const_mpi, ONLY: comm_lmdz
-   USE physiq_mod, ONLY: physiq
-   USE comvert_mod, ONLY: presnivs, ap, bp, dpres,nivsig, nivsigs, pa, &
-                          preff, aps, bps, pseudoalt, scaleheight
-   USE temps_mod, ONLY: annee_ref, calend, day_end, day_ini, day_ref, &
-                        itau_dyn, itau_phy, start_time
+   INTEGER forcing_type
 
-      implicit none
-#include "dimensions.h"
-#include "YOMCST.h"
-!!#include "control.h"
-#include "clesphys.h"
-#include "dimsoil.h"
-!#include "indicesol.h"
+   CALL getin('forcing_type',forcing_type)
 
-#include "compar1d.h"
-#include "flux_arp.h"
-#include "date_cas.h"
-#include "tsoilnudge.h"
-#include "fcg_gcssold.h"
-!!!#include "fbforcing.h"
-#include "compbl.h"
+   IF (forcing_type==1000) THEN
+           CALL scm
+   ELSE
+           CALL old_lmdz1d
+   ENDIF
 
-!=====================================================================
-! DECLARATIONS
-!=====================================================================
+   END
 
-!---------------------------------------------------------------------
-!  Externals
-!---------------------------------------------------------------------
-      external fq_sat
-      real fq_sat
-
-!---------------------------------------------------------------------
-!  Arguments d' initialisations de la physique (USER DEFINE)
-!---------------------------------------------------------------------
-
-      integer, parameter :: ngrid=1
-      real :: zcufi    = 1.
-      real :: zcvfi    = 1.
-
-!-      real :: nat_surf
-!-      logical :: ok_flux_surf
-!-      real :: fsens
-!-      real :: flat
-!-      real :: tsurf
-!-      real :: rugos
-!-      real :: qsol(1:2)
-!-      real :: qsurf
-!-      real :: psurf
-!-      real :: zsurf
-!-      real :: albedo
-!-
-!-      real :: time     = 0.
-!-      real :: time_ini
-!-      real :: xlat 
-!-      real :: xlon 
-!-      real :: wtsurf 
-!-      real :: wqsurf 
-!-      real :: restart_runoff 
-!-      real :: xagesno 
-!-      real :: qsolinp 
-!-      real :: zpicinp 
-!-
-      real :: fnday 
-      real :: day, daytime 
-      real :: day1
-      real :: heure
-      integer :: jour
-      integer :: mois
-      integer :: an
- 
-!---------------------------------------------------------------------
-!  Declarations related to forcing and initial profiles 
-!---------------------------------------------------------------------
-
-        integer :: kmax = llm
-        integer llm700,nq1,nq2
-        INTEGER, PARAMETER :: nlev_max=1000, nqmx=1000
-        real timestep, frac
-        real height(nlev_max),tttprof(nlev_max),qtprof(nlev_max)
-        real  uprof(nlev_max),vprof(nlev_max),e12prof(nlev_max)
-        real  ugprof(nlev_max),vgprof(nlev_max),wfls(nlev_max)
-        real  dqtdxls(nlev_max),dqtdyls(nlev_max)
-        real  dqtdtls(nlev_max),thlpcar(nlev_max)
-        real  qprof(nlev_max,nqmx)
-
-!        integer :: forcing_type
-        logical :: forcing_les     = .false.
-        logical :: forcing_armcu   = .false.
-        logical :: forcing_rico    = .false.
-        logical :: forcing_radconv = .false.
-        logical :: forcing_toga    = .false.
-        logical :: forcing_twpice  = .false.
-        logical :: forcing_amma    = .false.
-        logical :: forcing_dice    = .false.
-        logical :: forcing_gabls4  = .false.
-
-        logical :: forcing_GCM2SCM = .false.
-        logical :: forcing_GCSSold = .false.
-        logical :: forcing_sandu   = .false.
-        logical :: forcing_astex   = .false.
-        logical :: forcing_fire    = .false.
-        logical :: forcing_case    = .false.
-        logical :: forcing_case2   = .false.
-        integer :: type_ts_forcing ! 0 = SST constant; 1 = SST read from a file
-!                                                            (cf read_tsurf1d.F)
-
-!vertical advection computation
-!       real d_t_z(llm), d_q_z(llm)
-!       real d_t_dyn_z(llm), dq_dyn_z(llm)
-!       real zz(llm)
-!       real zfact
-
-!flag forcings
-        logical :: nudge_wind=.true.
-        logical :: nudge_thermo=.false.
-        logical :: cptadvw=.true.
-!=====================================================================
-! DECLARATIONS FOR EACH CASE
-!=====================================================================
-!
-#include "1D_decl_cases.h"
-!
-!---------------------------------------------------------------------
-!  Declarations related to nudging
-!---------------------------------------------------------------------
-     integer :: nudge_max
-     parameter (nudge_max=9)
-     integer :: inudge_RHT=1
-     integer :: inudge_UV=2
-     logical :: nudge(nudge_max)
-     real :: t_targ(llm)
-     real :: rh_targ(llm)
-     real :: u_targ(llm)
-     real :: v_targ(llm)
-!
-!---------------------------------------------------------------------
-!  Declarations related to vertical discretization:
-!---------------------------------------------------------------------
-      real :: pzero=1.e5
-      real :: play (llm),zlay (llm),sig_s(llm),plev(llm+1)
-      real :: playd(llm),zlayd(llm),ap_amma(llm+1),bp_amma(llm+1)
-
-!---------------------------------------------------------------------
-!  Declarations related to variables
-!---------------------------------------------------------------------
-
-      real :: phi(llm)
-      real :: teta(llm),tetal(llm),temp(llm),u(llm),v(llm),w(llm)
-      REAL rot(1, llm) ! relative vorticity, in s-1
-      real :: rlat_rad(1),rlon_rad(1)
-      real :: omega(llm+1),omega2(llm),rho(llm+1)
-      real :: ug(llm),vg(llm),fcoriolis
-      real :: sfdt, cfdt
-      real :: du_phys(llm),dv_phys(llm),dt_phys(llm)
-      real :: dt_dyn(llm)
-      real :: dt_cooling(llm),d_t_adv(llm),d_t_nudge(llm)
-      real :: d_u_nudge(llm),d_v_nudge(llm)
-      real :: du_adv(llm),dv_adv(llm)
-      real :: du_age(llm),dv_age(llm)
-      real :: alpha
-      real :: ttt
-
-      REAL, ALLOCATABLE, DIMENSION(:,:):: q
-      REAL, ALLOCATABLE, DIMENSION(:,:):: dq
-      REAL, ALLOCATABLE, DIMENSION(:,:):: dq_dyn
-      REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_adv
-      REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_nudge
-!      REAL, ALLOCATABLE, DIMENSION(:):: d_th_adv
-
-!---------------------------------------------------------------------
-!  Initialization of surface variables
-!---------------------------------------------------------------------
-      real :: run_off_lic_0(1)
-      real :: fder(1),snsrf(1,nbsrf),qsurfsrf(1,nbsrf)
-      real :: tsoil(1,nsoilmx,nbsrf)
-!     real :: agesno(1,nbsrf)
-
-!---------------------------------------------------------------------
-!  Call to phyredem
-!---------------------------------------------------------------------
-      logical :: ok_writedem =.true.
-      real :: sollw_in = 0.
-      real :: solsw_in = 0.
-      
-!---------------------------------------------------------------------
-!  Call to physiq
-!---------------------------------------------------------------------
-      logical :: firstcall=.true.
-      logical :: lastcall=.false.
-      real :: phis(1)    = 0.0
-      real :: dpsrf(1)
-
-!---------------------------------------------------------------------
-!  Initializations of boundary conditions 
-!---------------------------------------------------------------------
-      integer, parameter :: yd = 360
-      real :: phy_nat (yd) = 0.0 ! 0=ocean libre,1=land,2=glacier,3=banquise
-      real :: phy_alb (yd)  ! Albedo land only (old value condsurf_jyg=0.3)
-      real :: phy_sst (yd)  ! SST (will not be used; cf read_tsurf1d.F)
-      real :: phy_bil (yd) = 1.0 ! Ne sert que pour les slab_ocean
-      real :: phy_rug (yd) ! Longueur rugosite utilisee sur land only
-      real :: phy_ice (yd) = 0.0 ! Fraction de glace
-      real :: phy_fter(yd) = 0.0 ! Fraction de terre
-      real :: phy_foce(yd) = 0.0 ! Fraction de ocean
-      real :: phy_fsic(yd) = 0.0 ! Fraction de glace
-      real :: phy_flic(yd) = 0.0 ! Fraction de glace
-
-!---------------------------------------------------------------------
-!  Fichiers et d'autres variables
-!---------------------------------------------------------------------
-      integer :: k,l,i,it=1,mxcalc
-      integer :: nsrf
-      integer jcode
-      INTEGER read_climoz 
-!
-      integer :: it_end ! iteration number of the last call
-!Al1
-      integer ecrit_slab_oc !1=ecrit,-1=lit,0=no file
-      data ecrit_slab_oc/-1/
-!
-!     if flag_inhib_forcing = 0, tendencies of forcing are added
-!                           <> 0, tendencies of forcing are not added
-      INTEGER :: flag_inhib_forcing = 0
-
-!=====================================================================
-! INITIALIZATIONS 
-!=====================================================================
-      du_phys(:)=0.
-      dv_phys(:)=0.
-      dt_phys(:)=0.
-      dt_dyn(:)=0.
-      dt_cooling(:)=0.
-      d_t_adv(:)=0.
-      d_t_nudge(:)=0.
-      d_u_nudge(:)=0.
-      d_v_nudge(:)=0.
-      du_adv(:)=0.
-      dv_adv(:)=0.
-      du_age(:)=0.
-      dv_age(:)=0.
-      
-! Initialization of Common turb_forcing
-       dtime_frcg = 0.
-       Turb_fcg_gcssold=.false.
-       hthturb_gcssold = 0.
-       hqturb_gcssold = 0.
-
-
-
-
-!---------------------------------------------------------------------
-! OPTIONS OF THE 1D SIMULATION (lmdz1d.def => unicol.def)
-!---------------------------------------------------------------------
-!Al1
-        call conf_unicol
-!Al1 moves this gcssold var from common fcg_gcssold to 
-        Turb_fcg_gcssold = xTurb_fcg_gcssold
-! --------------------------------------------------------------------
-        close(1)
-!Al1
-        write(*,*) 'lmdz1d.def lu => unicol.def'
-
-! forcing_type defines the way the SCM is forced:
-!forcing_type = 0 ==> forcing_les = .true.
-!             initial profiles from file prof.inp.001
-!             no forcing by LS convergence ; 
-!             surface temperature imposed ;
-!             radiative cooling may be imposed (iflag_radia=0 in physiq.def)
-!forcing_type = 1 ==> forcing_radconv = .true.
-!             idem forcing_type = 0, but the imposed radiative cooling 
-!             is set to 0 (hence, if iflag_radia=0 in physiq.def, 
-!             then there is no radiative cooling at all)
-!forcing_type = 2 ==> forcing_toga = .true.
-!             initial profiles from TOGA-COARE IFA files 
-!             LS convergence and SST imposed from TOGA-COARE IFA files 
-!forcing_type = 3 ==> forcing_GCM2SCM = .true.
-!             initial profiles from the GCM output
-!             LS convergence imposed from the GCM output
-!forcing_type = 4 ==> forcing_twpice = .true.
-!             initial profiles from TWP-ICE cdf file 
-!             LS convergence, omega and SST imposed from TWP-ICE files 
-!forcing_type = 5 ==> forcing_rico = .true.
-!             initial profiles from RICO files 
-!             LS convergence imposed from RICO files 
-!forcing_type = 6 ==> forcing_amma = .true.
-!             initial profiles from AMMA nc file 
-!             LS convergence, omega and surface fluxes imposed from AMMA file  
-!forcing_type = 7 ==> forcing_dice = .true.
-!             initial profiles and large scale forcings in dice_driver.nc
-!             Different stages: soil model alone, atm. model alone
-!             then both models coupled
-!forcing_type = 8 ==> forcing_gabls4 = .true.
-!             initial profiles and large scale forcings in gabls4_driver.nc
-!forcing_type >= 100 ==> forcing_case = .true.
-!             initial profiles and large scale forcings in cas.nc
-!             LS convergence, omega and SST imposed from CINDY-DYNAMO files 
-!             101=cindynamo
-!             102=bomex
-!forcing_type >= 100 ==> forcing_case2 = .true.
-!             temporary flag while all the 1D cases are not whith the same cas.nc forcing file
-!             103=arm_cu2 ie arm_cu with new forcing format
-!             104=rico2 ie rico with new forcing format
-!forcing_type = 40 ==> forcing_GCSSold = .true.
-!             initial profile from GCSS file
-!             LS convergence imposed from GCSS file
-!forcing_type = 50 ==> forcing_fire = .true.
-!             forcing from fire.nc
-!forcing_type = 59 ==> forcing_sandu = .true.
-!             initial profiles from sanduref file: see prof.inp.001
-!             SST varying with time and divergence constante: see ifa_sanduref.txt file
-!             Radiation has to be computed interactively
-!forcing_type = 60 ==> forcing_astex = .true.
-!             initial profiles from file: see prof.inp.001 
-!             SST,divergence,ug,vg,ufa,vfa varying with time : see ifa_astex.txt file
-!             Radiation has to be computed interactively
-!forcing_type = 61 ==> forcing_armcu = .true.
-!             initial profiles from file: see prof.inp.001 
-!             sensible and latent heat flux imposed: see ifa_arm_cu_1.txt
-!             large scale advective forcing & radiative tendencies applied below 1000m: see ifa_arm_cu_2.txt
-!             use geostrophic wind ug=10m/s vg=0m/s. Duration of the case 53100s 
-!             Radiation to be switched off
-!
-      if (forcing_type <=0) THEN
-       forcing_les = .true.
-      elseif (forcing_type .eq.1) THEN
-       forcing_radconv = .true.
-      elseif (forcing_type .eq.2) THEN
-       forcing_toga    = .true.
-      elseif (forcing_type .eq.3) THEN
-       forcing_GCM2SCM = .true.
-      elseif (forcing_type .eq.4) THEN
-       forcing_twpice = .true.
-      elseif (forcing_type .eq.5) THEN
-       forcing_rico = .true.
-      elseif (forcing_type .eq.6) THEN
-       forcing_amma = .true.
-      elseif (forcing_type .eq.7) THEN
-       forcing_dice = .true.
-      elseif (forcing_type .eq.8) THEN
-       forcing_gabls4 = .true.
-      elseif (forcing_type .eq.101) THEN ! Cindynamo starts 1-10-2011 0h
-       forcing_case = .true.
-       year_ini_cas=2011
-       mth_ini_cas=10
-       day_deb=1
-       heure_ini_cas=0.
-       pdt_cas=3*3600.         ! forcing frequency
-      elseif (forcing_type .eq.102) THEN ! Bomex starts 24-6-1969 0h
-       forcing_case = .true.
-       year_ini_cas=1969
-       mth_ini_cas=6
-       day_deb=24
-       heure_ini_cas=0.
-       pdt_cas=1800.         ! forcing frequency
-      elseif (forcing_type .eq.103) THEN ! Arm_cu starts 21-6-1997 11h30
-       forcing_case2 = .true.
-       year_ini_cas=1997
-       mth_ini_cas=6
-       day_deb=21
-       heure_ini_cas=11.5
-       pdt_cas=1800.         ! forcing frequency
-      elseif (forcing_type .eq.104) THEN ! rico starts 16-12-2004 0h
-       forcing_case2 = .true.
-       year_ini_cas=2004
-       mth_ini_cas=12
-       day_deb=16
-       heure_ini_cas=0.
-       pdt_cas=1800.         ! forcing frequency
-      elseif (forcing_type .eq.105) THEN ! bomex starts 16-12-2004 0h
-       forcing_case2 = .true.
-       year_ini_cas=1969
-       mth_ini_cas=6
-       day_deb=24
-       heure_ini_cas=0.
-       pdt_cas=1800.         ! forcing frequency
-      elseif (forcing_type .eq.106) THEN ! ayotte_24SC starts 6-11-1992 0h
-       forcing_case2 = .true.
-       year_ini_cas=1992
-       mth_ini_cas=11
-       day_deb=6
-       heure_ini_cas=10.
-       pdt_cas=86400.        ! forcing frequency
-      elseif (forcing_type .eq.40) THEN
-       forcing_GCSSold = .true.
-      elseif (forcing_type .eq.50) THEN
-       forcing_fire = .true.
-      elseif (forcing_type .eq.59) THEN
-       forcing_sandu   = .true.
-      elseif (forcing_type .eq.60) THEN
-       forcing_astex   = .true.
-      elseif (forcing_type .eq.61) THEN
-       forcing_armcu = .true.
-       IF(llm.NE.19.AND.llm.NE.40) stop 'Erreur nombre de niveaux !!'
-      else
-       write (*,*) 'ERROR : unknown forcing_type ', forcing_type
-       stop 'Forcing_type should be 0,1,2,3,4,5,6 or 40,59,60,61'
-      ENDIF
-      print*,"forcing type=",forcing_type
-
-! if type_ts_forcing=0, the surface temp of 1D simulation is constant in time
-! (specified by tsurf in lmdz1d.def); if type_ts_forcing=1, the surface temperature
-! varies in time according to a forcing (e.g. forcing_toga) and is passed to read_tsurf1d.F
-! through the common sst_forcing.
-
-        type_ts_forcing = 0
-        if (forcing_toga.or.forcing_sandu.or.forcing_astex .or. forcing_dice)                 &
-     &    type_ts_forcing = 1
-!
-! Initialization of the logical switch for nudging
-     jcode = iflag_nudge
-     do i = 1,nudge_max
-       nudge(i) = mod(jcode,10) .ge. 1
-       jcode = jcode/10
-     enddo
-!---------------------------------------------------------------------
-!  Definition of the run
-!---------------------------------------------------------------------
-
-      call conf_gcm( 99, .TRUE. )
-!-----------------------------------------------------------------------
-!   Choix du calendrier
-!   -------------------
-
-!      calend = 'earth_365d'
-      if (calend == 'earth_360d') then
-        call ioconf_calendar('360d')
-        write(*,*)'CALENDRIER CHOISI: Terrestre a 360 jours/an'
-      else if (calend == 'earth_365d') then
-        call ioconf_calendar('noleap')
-        write(*,*)'CALENDRIER CHOISI: Terrestre a 365 jours/an'
-      else if (calend == 'earth_366d') then
-        call ioconf_calendar('all_leap')
-        write(*,*)'CALENDRIER CHOISI: Terrestre bissextile'
-      else if (calend == 'gregorian') then
-        call ioconf_calendar('gregorian') ! not to be used by normal users
-        write(*,*)'CALENDRIER CHOISI: Gregorien'
-      else
-        write (*,*) 'ERROR : unknown calendar ', calend
-        stop 'calend should be 360d,earth_365d,earth_366d,gregorian'
-      endif
-!-----------------------------------------------------------------------
-!
-!c Date :
-!      La date est supposee donnee sous la forme [annee, numero du jour dans 
-!      l annee] ; l heure est donnee dans time_ini, lu dans lmdz1d.def.
-!      On appelle ymds2ju pour convertir [annee, jour] en [jour Julien].
-!      Le numero du jour est dans "day". L heure est traitee separement.
-!      La date complete est dans "daytime" (l'unite est le jour).
-      if (nday>0) then
-         fnday=nday
-      else
-         fnday=-nday/float(day_step)
-      endif
-      print *,'fnday=',fnday
-!     start_time doit etre en FRACTION DE JOUR
-      start_time=time_ini/24.
-
-! Special case for arm_cu which lasts less than one day : 53100s !! (MPL 20111026)
-      IF(forcing_type .EQ. 61) fnday=53100./86400.
-      IF(forcing_type .EQ. 103) fnday=53100./86400.
-! Special case for amma which lasts less than one day : 64800s !! (MPL 20120216)
-      IF(forcing_type .EQ. 6) fnday=64800./86400.
-!     IF(forcing_type .EQ. 6) fnday=50400./86400.
- IF(forcing_type .EQ. 8 ) fnday=129600./86400. 
-      annee_ref = anneeref
-      mois = 1
-      day_ref = dayref
-      heure = 0.
-      itau_dyn = 0
-      itau_phy = 0
-      call ymds2ju(annee_ref,mois,day_ref,heure,day)
-      day_ini = int(day)
-      day_end = day_ini + int(fnday)
-
-      IF (forcing_type .eq.2) THEN
-! Convert the initial date of Toga-Coare to Julian day
-      call ymds2ju                                                          &
-     & (year_ini_toga,mth_ini_toga,day_ini_toga,heure,day_ju_ini_toga)
-
-      ELSEIF (forcing_type .eq.4) THEN
-! Convert the initial date of TWPICE to Julian day
-      call ymds2ju                                                          &
-     & (year_ini_twpi,mth_ini_twpi,day_ini_twpi,heure_ini_twpi              &
-     & ,day_ju_ini_twpi)
-      ELSEIF (forcing_type .eq.6) THEN
-! Convert the initial date of AMMA to Julian day
-      call ymds2ju                                                          &
-     & (year_ini_amma,mth_ini_amma,day_ini_amma,heure_ini_amma              &
-     & ,day_ju_ini_amma)
-      ELSEIF (forcing_type .eq.7) THEN
-! Convert the initial date of DICE to Julian day
-      call ymds2ju                                                         &
-     & (year_ini_dice,mth_ini_dice,day_ini_dice,heure_ini_dice             & 
-     & ,day_ju_ini_dice)
- ELSEIF (forcing_type .eq.8 ) THEN
-! Convert the initial date of GABLS4 to Julian day
-      call ymds2ju                                                         &
-     & (year_ini_gabls4,mth_ini_gabls4,day_ini_gabls4,heure_ini_gabls4     & 
-     & ,day_ju_ini_gabls4)
-      ELSEIF (forcing_type .gt.100) THEN
-! Convert the initial date to Julian day
-      day_ini_cas=day_deb
-      print*,'time case',year_ini_cas,mth_ini_cas,day_ini_cas
-      call ymds2ju                                                         &
-     & (year_ini_cas,mth_ini_cas,day_ini_cas,heure_ini_cas*3600            &
-     & ,day_ju_ini_cas)
-      print*,'time case 2',day_ini_cas,day_ju_ini_cas
-      ELSEIF (forcing_type .eq.59) THEN
-! Convert the initial date of Sandu case to Julian day
-      call ymds2ju                                                          &
-     &   (year_ini_sandu,mth_ini_sandu,day_ini_sandu,                       &
-     &    time_ini*3600.,day_ju_ini_sandu)
-
-      ELSEIF (forcing_type .eq.60) THEN
-! Convert the initial date of Astex case to Julian day
-      call ymds2ju                                                          &
-     &   (year_ini_astex,mth_ini_astex,day_ini_astex,                        &
-     &    time_ini*3600.,day_ju_ini_astex)
-
-      ELSEIF (forcing_type .eq.61) THEN
-! Convert the initial date of Arm_cu case to Julian day
-      call ymds2ju                                                          &
-     & (year_ini_armcu,mth_ini_armcu,day_ini_armcu,heure_ini_armcu          &
-     & ,day_ju_ini_armcu)
-      ENDIF
-
-      IF (forcing_type .gt.100) THEN
-      daytime = day + heure_ini_cas/24. ! 1st day and initial time of the simulation 
-      ELSE
-      daytime = day + time_ini/24. ! 1st day and initial time of the simulation 
-      ENDIF
-! Print out the actual date of the beginning of the simulation :
-      call ju2ymds(daytime,year_print, month_print,day_print,sec_print)
-      print *,' Time of beginning : ',                                      &
-     &        year_print, month_print, day_print, sec_print
-
-!---------------------------------------------------------------------
-! Initialization of dimensions, geometry and initial state
-!---------------------------------------------------------------------
-!      call init_phys_lmdz(1,1,llm,1,(/1/)) ! job now done via iniphysiq
-!     but we still need to initialize dimphy module (klon,klev,etc.)  here.
-      call init_dimphy(1,llm)
-      call suphel
-      call infotrac_init 
-
-      if (nqtot>nqmx) STOP 'Augmenter nqmx dans lmdz1d.F'
-      allocate(q(llm,nqtot)) ; q(:,:)=0.
-      allocate(dq(llm,nqtot)) 
-      allocate(dq_dyn(llm,nqtot)) 
-      allocate(d_q_adv(llm,nqtot)) 
-      allocate(d_q_nudge(llm,nqtot)) 
-!      allocate(d_th_adv(llm)) 
-
-      q(:,:) = 0.
-      dq(:,:) = 0.
-      dq_dyn(:,:) = 0.
-      d_q_adv(:,:) = 0.
-      d_q_nudge(:,:) = 0.
-
-!
-!   No ozone climatology need be read in this pre-initialization
-!          (phys_state_var_init is called again in physiq)
-      read_climoz = 0
-!
-      call phys_state_var_init(read_climoz)
-
-      if (ngrid.ne.klon) then
-         print*,'stop in inifis'
-         print*,'Probleme de dimensions :'
-         print*,'ngrid = ',ngrid
-         print*,'klon  = ',klon
-         stop
-      endif
-!!!=====================================================================
-!!! Feedback forcing values for Gateaux differentiation (al1)
-!!!=====================================================================
-!!! Surface Planck forcing bracketing call radiation
-!!      surf_Planck = 0.
-!!      surf_Conv   = 0.
-!!      write(*,*) 'Gateaux-dif Planck,Conv:',surf_Planck,surf_Conv
-!!! a mettre dans le lmdz1d.def ou autre
-!!
-!!
-      qsol = qsolinp
-      qsurf = fq_sat(tsurf,psurf/100.)
-      day1= day_ini
-      time=daytime-day
-      ts_toga(1)=tsurf ! needed by read_tsurf1d.F
-      rho(1)=psurf/(rd*tsurf*(1.+(rv/rd-1.)*qsurf)) 
-
-!
-!! mpl et jyg le 22/08/2012 : 
-!!  pour que les cas a flux de surface imposes marchent
-      IF(.NOT.ok_flux_surf.or.max(abs(wtsurf),abs(wqsurf))>0.) THEN
-       fsens=-wtsurf*rcpd*rho(1)
-       flat=-wqsurf*rlvtt*rho(1)
-       print *,'Flux: ok_flux wtsurf wqsurf',ok_flux_surf,wtsurf,wqsurf
-      ENDIF
-      print*,'Flux sol ',fsens,flat
-!!      ok_flux_surf=.false.
-!!      fsens=-wtsurf*rcpd*rho(1)
-!!      flat=-wqsurf*rlvtt*rho(1)
-!!!!
-
-! Vertical discretization and pressure levels at half and mid levels:
-
-      pa   = 5e4
-!!      preff= 1.01325e5
-      preff = psurf
-      IF (ok_old_disvert) THEN
-        call disvert0(pa,preff,ap,bp,dpres,presnivs,nivsigs,nivsig)
-        print *,'On utilise disvert0'
-        aps(1:llm)=0.5*(ap(1:llm)+ap(2:llm+1))
-        bps(1:llm)=0.5*(bp(1:llm)+bp(2:llm+1))
-        scaleheight=8.
-        pseudoalt(1:llm)=-scaleheight*log(presnivs(1:llm)/preff)
-      ELSE
-        call disvert()
-        print *,'On utilise disvert'
-!       Nouvelle version disvert permettant d imposer ap,bp (modif L.Guez) MPL 18092012
-!       Dans ce cas, on lit ap,bp dans le fichier hybrid.txt
-      ENDIF
-
-      sig_s=presnivs/preff
-      plev =ap+bp*psurf
-      play = 0.5*(plev(1:llm)+plev(2:llm+1))
-      zlay=-rd*300.*log(play/psurf)/rg ! moved after reading profiles
-
-      IF (forcing_type .eq. 59) THEN
-! pour forcing_sandu, on cherche l'indice le plus proche de 700hpa#3000m
-      write(*,*) '***********************'
-      do l = 1, llm
-       write(*,*) 'l,play(l),presnivs(l): ',l,play(l),presnivs(l)
-       if (trouve_700 .and. play(l).le.70000) then
-         llm700=l
-         print *,'llm700,play=',llm700,play(l)/100.
-         trouve_700= .false.
-       endif
-      enddo
-      write(*,*) '***********************'
-      ENDIF
-
-!
-!=====================================================================
-! EVENTUALLY, READ FORCING DATA :
-!=====================================================================
-
-#include "1D_read_forc_cases.h"
-
-      if (forcing_GCM2SCM) then
-        write (*,*) 'forcing_GCM2SCM not yet implemented'
-        stop 'in initialization'
-      endif ! forcing_GCM2SCM
-
-      print*,'mxcalc=',mxcalc
-!     print*,'zlay=',zlay(mxcalc)
-      print*,'play=',play(mxcalc)
-
-!Al1 pour SST forced, appell?? depuis ocean_forced_noice
-      ts_cur = tsurf ! SST used in read_tsurf1d
-!=====================================================================
-! Initialisation de la physique : 
-!=====================================================================
-
-!  Rq: conf_phys.F90 lit tous les flags de physiq.def; conf_phys appele depuis physiq.F
-!
-! day_step, iphysiq lus dans gcm.def ci-dessus
-! timestep: calcule ci-dessous from rday et day_step
-! ngrid=1
-! llm: defini dans .../modipsl/modeles/LMDZ4/libf/grid/dimension
-! rday: defini dans suphel.F (86400.)
-! day_ini: lu dans run.def (dayref)
-! rlat_rad,rlon-rad: transformes en radian de rlat,rlon lus dans lmdz1d.def (en degres)
-! airefi,zcufi,zcvfi initialises au debut de ce programme
-! rday,ra,rg,rd,rcpd declares dans YOMCST.h et calcules dans suphel.F
-      day_step = float(nsplit_phys)*day_step/float(iphysiq)
-      write (*,*) 'Time step divided by nsplit_phys (=',nsplit_phys,')'
-      timestep =rday/day_step
-      dtime_frcg = timestep
-!
-      zcufi=airefi
-      zcvfi=airefi
-!
-      rlat_rad(1)=xlat*rpi/180.
-      rlon_rad(1)=xlon*rpi/180.
-
-     ! Ehouarn: iniphysiq requires arrays related to (3D) dynamics grid,
-     ! e.g. for cell boundaries, which are meaningless in 1D; so pad these 
-     ! with '0.' when necessary
-      call iniphysiq(iim,jjm,llm, &
-           1,comm_lmdz, &
-           rday,day_ini,timestep,  &
-           (/rlat_rad(1),0./),(/0./), &
-           (/0.,0./),(/rlon_rad(1),0./),  &
-           (/ (/airefi,0./),(/0.,0./) /), &
-           (/zcufi,0.,0.,0./), &
-           (/zcvfi,0./), &
-           ra,rg,rd,rcpd,1)
-      print*,'apres iniphysiq'
-
-! 2 PARAMETRES QUI DEVRAIENT ETRE LUS DANS run.def MAIS NE LE SONT PAS ICI:
-      co2_ppm= 330.0
-      solaire=1370.0
-
-! Ecriture du startphy avant le premier appel a la physique.
-! On le met juste avant pour avoir acces a tous les champs
-
-      if (ok_writedem) then
-
-!--------------------------------------------------------------------------
-! pbl_surface_init (called here) and pbl_surface_final (called by phyredem)
-! need : qsol fder snow qsurf evap rugos agesno ftsoil
-!--------------------------------------------------------------------------
-
-        type_ocean = "force"
-        run_off_lic_0(1) = restart_runoff 
-        call fonte_neige_init(run_off_lic_0)
-
-        fder=0.
-        snsrf(1,:)=snowmass ! masse de neige des sous surface
-        qsurfsrf(1,:)=qsurf ! humidite de l'air des sous surface
-        fevap=0.
-        z0m(1,:)=rugos     ! couverture de neige des sous surface
-        z0h(1,:)=rugosh    ! couverture de neige des sous surface
-        agesno  = xagesno
-        tsoil(:,:,:)=tsurf
-!------ AMMA 2e run avec modele sol et rayonnement actif (MPL 23052012)
-!       tsoil(1,1,1)=299.18
-!       tsoil(1,2,1)=300.08
-!       tsoil(1,3,1)=301.88
-!       tsoil(1,4,1)=305.48
-!       tsoil(1,5,1)=308.00
-!       tsoil(1,6,1)=308.00
-!       tsoil(1,7,1)=308.00
-!       tsoil(1,8,1)=308.00
-!       tsoil(1,9,1)=308.00
-!       tsoil(1,10,1)=308.00
-!       tsoil(1,11,1)=308.00
-!-----------------------------------------------------------------------
-        call pbl_surface_init(fder, snsrf, qsurfsrf, tsoil)
-
-!------------------ prepare limit conditions for limit.nc -----------------
-!--   Ocean force
-
-        print*,'avant phyredem'
-        pctsrf(1,:)=0.
-          if (nat_surf.eq.0.) then
-          pctsrf(1,is_oce)=1.
-          pctsrf(1,is_ter)=0.
-          pctsrf(1,is_lic)=0.
-          pctsrf(1,is_sic)=0.
-        else if (nat_surf .eq. 1) then 
-          pctsrf(1,is_oce)=0.
-          pctsrf(1,is_ter)=1.
-          pctsrf(1,is_lic)=0.
-          pctsrf(1,is_sic)=0.
-        else if (nat_surf .eq. 2) then 
-          pctsrf(1,is_oce)=0.
-          pctsrf(1,is_ter)=0.
-          pctsrf(1,is_lic)=1.
-          pctsrf(1,is_sic)=0.
-        else if (nat_surf .eq. 3) then 
-          pctsrf(1,is_oce)=0.
-          pctsrf(1,is_ter)=0.
-          pctsrf(1,is_lic)=0.
-          pctsrf(1,is_sic)=1.
-
-     end if
-
-
-        print*,'nat_surf,pctsrf(1,is_oce),pctsrf(1,is_ter)',nat_surf         &
-     &        ,pctsrf(1,is_oce),pctsrf(1,is_ter)
-
-        zmasq=pctsrf(1,is_ter)+pctsrf(1,is_lic)
-        zpic = zpicinp
-        ftsol=tsurf
-        nsw=6 ! on met le nb de bandes SW=6, pour initialiser
-              ! 6 albedo, mais on peut quand meme tourner avec
-              ! moins. Seules les 2 ou 4 premiers seront lus
-        falb_dir=albedo
-        falb_dif=albedo
-        rugoro=rugos 
-        t_ancien(1,:)=temp(:)
-        q_ancien(1,:)=q(:,1)
-        ql_ancien = 0.
-        qs_ancien = 0.
-        prlw_ancien = 0.
-        prsw_ancien = 0.
-        prw_ancien = 0.
-!jyg<
-!!        pbl_tke(:,:,:)=1.e-8
-        pbl_tke(:,:,:)=0.
-        pbl_tke(:,2,:)=1.e-2
-        PRINT *, ' pbl_tke dans lmdz1d '
-        if (prt_level .ge. 5) then 
-         DO nsrf = 1,4
-           PRINT *,'pbl_tke(1,:,',nsrf,') ',pbl_tke(1,:,nsrf)
-         ENDDO
-        end if
-
-!>jyg
-
-        rain_fall=0.
-        snow_fall=0.
-        solsw=0.
-        sollw=0.
-        sollwdown=rsigma*tsurf**4
-        radsol=0.
-        rnebcon=0.
-        ratqs=0.
-        clwcon=0.
-        zmax0 = 0.
-        zmea=0.
-        zstd=0.
-        zsig=0.
-        zgam=0.
-        zval=0. 
-        zthe=0. 
-        sig1=0.
-        w01=0.
-        wake_cstar = 0.
-        wake_deltaq = 0.
-        wake_deltat = 0.
-        wake_delta_pbl_TKE(:,:,:) = 0.
-        delta_tsurf = 0.
-        wake_fip = 0.
-        wake_pe = 0.
-        wake_s = 0.
-        wake_dens = 0.
-        ale_bl = 0.
-        ale_bl_trig = 0.
-        alp_bl = 0.
-        IF (ALLOCATED(du_gwd_rando)) du_gwd_rando = 0.
-        IF (ALLOCATED(du_gwd_front)) du_gwd_front = 0.
-        entr_therm = 0.
-        detr_therm = 0.
-        f0 = 0.
-        fm_therm = 0.
-        u_ancien(1,:)=u(:)
-        v_ancien(1,:)=v(:)
- 
-!------------------------------------------------------------------------
-! Make file containing restart for the physics (startphy.nc)
-!
-! NB: List of the variables to be written by phyredem (via put_field):
-! rlon,rlat,zmasq,pctsrf(:,is_ter),pctsrf(:,is_lic),pctsrf(:,is_oce)
-! pctsrf(:,is_sic),ftsol(:,nsrf),tsoil(:,isoil,nsrf),qsurf(:,nsrf)
-! qsol,falb_dir(:,nsrf),falb_dif(:,nsrf),evap(:,nsrf),snow(:,nsrf)
-! radsol,solsw,sollw, sollwdown,fder,rain_fall,snow_fall,frugs(:,nsrf)
-! agesno(:,nsrf),zmea,zstd,zsig,zgam,zthe,zpic,zval,rugoro
-! t_ancien,q_ancien,,frugs(:,is_oce),clwcon(:,1),rnebcon(:,1),ratqs(:,1)
-! run_off_lic_0,pbl_tke(:,1:klev,nsrf), zmax0,f0,sig1,w01
-! wake_deltat,wake_deltaq,wake_s,wake_dens,wake_cstar,
-! wake_fip,wake_delta_pbl_tke(:,1:klev,nsrf)
-!
-! NB2: The content of the startphy.nc file depends on some flags defined in
-! the ".def" files. However, since conf_phys is not called in lmdz1d.F90, these flags have 
-! to be set at some arbitratry convenient values.
-!------------------------------------------------------------------------
-!Al1 =============== restart option ==========================
-        if (.not.restart) then
-          iflag_pbl = 5
-          call phyredem ("startphy.nc")
-        else
-! (desallocations)
-        print*,'callin surf final'
-          call pbl_surface_final( fder, snsrf, qsurfsrf, tsoil)
-        print*,'after surf final'
-          CALL fonte_neige_final(run_off_lic_0)
-        endif
-
-        ok_writedem=.false.
-        print*,'apres phyredem'
-
-      endif ! ok_writedem
-      
-!------------------------------------------------------------------------
-! Make file containing boundary conditions (limit.nc) **Al1->restartdyn***
-! --------------------------------------------------
-! NB: List of the variables to be written in limit.nc 
-!     (by writelim.F, subroutine of 1DUTILS.h):
-!        phy_nat,phy_alb,phy_sst,phy_bil,phy_rug,phy_ice,
-!        phy_fter,phy_foce,phy_flic,phy_fsic)
-!------------------------------------------------------------------------
-      do i=1,yd
-        phy_nat(i)  = nat_surf
-        phy_alb(i)  = albedo
-        phy_sst(i)  = tsurf ! read_tsurf1d will be used instead
-        phy_rug(i)  = rugos
-        phy_fter(i) = pctsrf(1,is_ter)
-        phy_foce(i) = pctsrf(1,is_oce)
-        phy_fsic(i) = pctsrf(1,is_sic)
-        phy_flic(i) = pctsrf(1,is_lic)
-      enddo
-
-! fabrication de limit.nc
-      call writelim (1,phy_nat,phy_alb,phy_sst,phy_bil,phy_rug,             &
-     &               phy_ice,phy_fter,phy_foce,phy_flic,phy_fsic)
-
-
-      call phys_state_var_end
-!Al1
-      if (restart) then
-        print*,'call to restart dyn 1d'
-        Call dyn1deta0("start1dyn.nc",plev,play,phi,phis,presnivs,          &
-     &              u,v,temp,q,omega2)
-
-       print*,'fnday,annee_ref,day_ref,day_ini',                            &
-     &     fnday,annee_ref,day_ref,day_ini
-!**      call ymds2ju(annee_ref,mois,day_ini,heure,day)
-       day = day_ini
-       day_end = day_ini + nday
-       daytime = day + time_ini/24. ! 1st day and initial time of the simulation 
-
-! Print out the actual date of the beginning of the simulation :
-       call ju2ymds(daytime, an, mois, jour, heure)
-       print *,' Time of beginning : y m d h',an, mois,jour,heure/3600.
-
-       day = int(daytime)
-       time=daytime-day
-  
-       print*,'****** intialised fields from restart1dyn *******'
-       print*,'plev,play,phi,phis,presnivs,u,v,temp,q,omega2'
-       print*,'temp(1),q(1,1),u(1),v(1),plev(1),phis :'
-       print*,temp(1),q(1,1),u(1),v(1),plev(1),phis
-! raz for safety
-       do l=1,llm
-         dq_dyn(l,1) = 0.
-       enddo
-      endif
-!Al1 ================  end restart =================================
-      IF (ecrit_slab_oc.eq.1) then
-         open(97,file='div_slab.dat',STATUS='UNKNOWN')
-       elseif (ecrit_slab_oc.eq.0) then
-         open(97,file='div_slab.dat',STATUS='OLD')
-       endif
-!
-!---------------------------------------------------------------------
-!    Initialize target profile for RHT nudging if needed
-!---------------------------------------------------------------------
-      if (nudge(inudge_RHT)) then
-        call nudge_RHT_init(plev,play,temp,q(:,1),t_targ,rh_targ)
-      endif
-      if (nudge(inudge_UV)) then
-        call nudge_UV_init(plev,play,u,v,u_targ,v_targ)
-      endif
-!
-!=====================================================================
-       CALL iophys_ini
-! START OF THE TEMPORAL LOOP :
-!=====================================================================
-           
-      it_end = nint(fnday*day_step)
-!test JLD     it_end = 10
-      do while(it.le.it_end)
-
-       if (prt_level.ge.1) then
-         print*,'XXXXXXXXXXXXXXXXXXX ITAP,day,time=',                       &
-     &             it,day,time,it_end,day_step
-         print*,'PAS DE TEMPS ',timestep
-       endif
-!Al1 demande de restartphy.nc
-       if (it.eq.it_end) lastcall=.True.
-
-!---------------------------------------------------------------------
-! Interpolation of forcings in time and onto model levels
-!---------------------------------------------------------------------
-
-#include "1D_interp_cases.h"
-
-      if (forcing_GCM2SCM) then
-        write (*,*) 'forcing_GCM2SCM not yet implemented'
-        stop 'in time loop'
-      endif ! forcing_GCM2SCM
-
-!---------------------------------------------------------------------
-!  Geopotential :
-!---------------------------------------------------------------------
-
-        phi(1)=RD*temp(1)*(plev(1)-play(1))/(.5*(plev(1)+play(1)))
-        do l = 1, llm-1
-          phi(l+1)=phi(l)+RD*(temp(l)+temp(l+1))*                           &
-     &    (play(l)-play(l+1))/(play(l)+play(l+1))
-        enddo
-
-!---------------------------------------------------------------------
-! Listing output for debug prt_level>=1
-!---------------------------------------------------------------------
-       if (prt_level>=1) then
-         print *,' avant physiq : -------- day time ',day,time
-         write(*,*) 'firstcall,lastcall,phis',                               &
-     &               firstcall,lastcall,phis
-       end if
-       if (prt_level>=5) then
-         write(*,'(a10,2a4,4a13)') 'BEFOR1 IT=','it','l',                   &
-     &        'presniv','plev','play','phi'
-         write(*,'(a10,2i4,4f13.2)') ('BEFOR1 IT= ',it,l,                   &
-     &         presnivs(l),plev(l),play(l),phi(l),l=1,llm)
-         write(*,'(a11,2a4,a11,6a8)') 'BEFOR2','it','l',                    &
-     &         'presniv','u','v','temp','q1','q2','omega2'
-         write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('BEFOR2 IT= ',it,l,         &
-     &   presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
-       endif
-
-!---------------------------------------------------------------------
-!   Call physiq :
-!---------------------------------------------------------------------
-       call physiq(ngrid,llm, &
-                    firstcall,lastcall,timestep, &
-                    plev,play,phi,phis,presnivs, &
-                    u,v, rot, temp,q,omega2, &
-                    du_phys,dv_phys,dt_phys,dq,dpsrf)
-                firstcall=.false.
-
-!---------------------------------------------------------------------
-! Listing output for debug
-!---------------------------------------------------------------------
-        if (prt_level>=5) then
-          write(*,'(a11,2a4,4a13)') 'AFTER1 IT=','it','l',                  &
-     &        'presniv','plev','play','phi'
-          write(*,'(a11,2i4,4f13.2)') ('AFTER1 it= ',it,l,                  &
-     &    presnivs(l),plev(l),play(l),phi(l),l=1,llm)
-          write(*,'(a11,2a4,a11,6a8)') 'AFTER2','it','l',                   &
-     &         'presniv','u','v','temp','q1','q2','omega2'
-          write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('AFTER2 it= ',it,l,       &
-     &    presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
-          write(*,'(a11,2a4,a11,5a8)') 'AFTER3','it','l',                   &
-     &         'presniv','du_phys','dv_phys','dt_phys','dq1','dq2'    
-           write(*,'(a11,2i4,f11.2,5f8.2)') ('AFTER3 it= ',it,l,            &
-     &      presnivs(l),86400*du_phys(l),86400*dv_phys(l),                   &
-     &       86400*dt_phys(l),86400*dq(l,1),dq(l,2),l=1,llm)
-          write(*,*) 'dpsrf',dpsrf
-        endif
-!---------------------------------------------------------------------
-!   Add physical tendencies :
-!---------------------------------------------------------------------
-
-       fcoriolis=2.*sin(rpi*xlat/180.)*romega
-       if (forcing_radconv .or. forcing_fire) then
-         fcoriolis=0.0
-         dt_cooling=0.0
-         d_t_adv=0.0
-         d_q_adv=0.0
-       endif
-!      print*, 'calcul de fcoriolis ', fcoriolis
-
-       if (forcing_toga .or. forcing_GCSSold .or. forcing_twpice            &
-     &    .or.forcing_amma .or. forcing_type.eq.101) then
-         fcoriolis=0.0 ; ug=0. ; vg=0.
-       endif
-
-       if(forcing_rico) then
-          dt_cooling=0.
-       endif
-
-!CRio:Attention modif sp??cifique cas de Caroline
-      if (forcing_type==-1) then
-         fcoriolis=0.
-!Nudging
-        
-!on calcule dt_cooling
-        do l=1,llm
-        if (play(l).ge.20000.) then
-            dt_cooling(l)=-1.5/86400.
-        elseif ((play(l).ge.10000.).and.((play(l).lt.20000.))) then
-            dt_cooling(l)=-1.5/86400.*(play(l)-10000.)/(10000.)-1./86400.*(20000.-play(l))/10000.*(temp(l)-200.)
-        else
-            dt_cooling(l)=-1.*(temp(l)-200.)/86400.
-        endif
-        enddo
-
-      endif     
-!RC
-      if (forcing_sandu) then
-         ug(1:llm)=u_mod(1:llm)
-         vg(1:llm)=v_mod(1:llm)
-      endif
-
-      IF (prt_level >= 5) print*, 'fcoriolis, xlat,mxcalc ', &
-                                   fcoriolis, xlat,mxcalc
-
-!       print *,'u-ug=',u-ug
-
-!!!!!!!!!!!!!!!!!!!!!!!!
-! Geostrophic wind
-! Le calcul ci dessous est insuffisamment precis
-!      du_age(1:mxcalc)=fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
-!      dv_age(1:mxcalc)=-fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
-!!!!!!!!!!!!!!!!!!!!!!!!
-       sfdt = sin(0.5*fcoriolis*timestep)
-       cfdt = cos(0.5*fcoriolis*timestep)
-!       print *,'fcoriolis,sfdt,cfdt,timestep',fcoriolis,sfdt,cfdt,timestep
-!
-        du_age(1:mxcalc)= -2.*sfdt/timestep*                                &
-     &          (sfdt*(u(1:mxcalc)-ug(1:mxcalc)) -                          &
-     &           cfdt*(v(1:mxcalc)-vg(1:mxcalc))  )
-!!     : fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
-!
-       dv_age(1:mxcalc)= -2.*sfdt/timestep*                                 &
-     &          (cfdt*(u(1:mxcalc)-ug(1:mxcalc)) +                           &
-     &           sfdt*(v(1:mxcalc)-vg(1:mxcalc))  )
-!!     : -fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
-!
-!!!!!!!!!!!!!!!!!!!!!!!!
-!  Nudging
-!!!!!!!!!!!!!!!!!!!!!!!!
-      d_t_nudge(:) = 0.
-      d_q_nudge(:,:) = 0.
-      d_u_nudge(:) = 0.
-      d_v_nudge(:) = 0.
-      if (nudge(inudge_RHT)) then
-        call nudge_RHT(timestep,plev,play,t_targ,rh_targ,temp,q(:,1),     &
-    &                  d_t_nudge,d_q_nudge(:,1))
-      endif
-      if (nudge(inudge_UV)) then
-        call nudge_UV(timestep,plev,play,u_targ,v_targ,u,v,     &
-    &                  d_u_nudge,d_v_nudge)
-      endif
-!
-!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-!         call  writefield_phy('dv_age' ,dv_age,llm)
-!         call  writefield_phy('du_age' ,du_age,llm)
-!         call  writefield_phy('du_phys' ,du_phys,llm)
-!         call  writefield_phy('u_tend' ,u,llm)
-!         call  writefield_phy('u_g' ,ug,llm)
-!
-!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-!! Increment state variables
-!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-    IF (flag_inhib_forcing == 0) then ! if tendency of forcings should be added
-
-! pour les cas sandu et astex, on reclacule u,v,q,temp et teta dans 1D_nudge_sandu_astex.h
-! au dessus de 700hpa, on relaxe vers les profils initiaux
-      if (forcing_sandu .OR. forcing_astex) then
-#include "1D_nudge_sandu_astex.h"
-      else
-        u(1:mxcalc)=u(1:mxcalc) + timestep*(                                &
-     &              du_phys(1:mxcalc)                                       &
-     &             +du_age(1:mxcalc)+du_adv(1:mxcalc)                       &
-     &             +d_u_nudge(1:mxcalc) )            
-        v(1:mxcalc)=v(1:mxcalc) + timestep*(                                 &
-     &              dv_phys(1:mxcalc)                                       &
-     &             +dv_age(1:mxcalc)+dv_adv(1:mxcalc)                       &
-     &             +d_v_nudge(1:mxcalc) )
-        q(1:mxcalc,:)=q(1:mxcalc,:)+timestep*(                              &
-     &                dq(1:mxcalc,:)                                        &
-     &               +d_q_adv(1:mxcalc,:)                                   &
-     &               +d_q_nudge(1:mxcalc,:) )
-
-        if (prt_level.ge.3) then
-          print *,                                                          &
-     &    'physiq-> temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1) ',         &
-     &              temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1)
-           print* ,'dv_phys=',dv_phys
-           print* ,'dv_age=',dv_age
-           print* ,'dv_adv=',dv_adv
-           print* ,'d_v_nudge=',d_v_nudge
-           print*, v
-           print*, vg
-        endif
-
-        temp(1:mxcalc)=temp(1:mxcalc)+timestep*(                            &
-     &              dt_phys(1:mxcalc)                                       &
-     &             +d_t_adv(1:mxcalc)                                      &
-     &             +d_t_nudge(1:mxcalc)                                      &
-     &             +dt_cooling(1:mxcalc))  ! Taux de chauffage ou refroid.
-
-      endif  ! forcing_sandu or forcing_astex
-
-        teta=temp*(pzero/play)**rkappa
-!
-!---------------------------------------------------------------------
-!   Nudge soil temperature if requested
-!---------------------------------------------------------------------
-
-      IF (nudge_tsoil .AND. .NOT. lastcall) THEN
-       ftsoil(1,isoil_nudge,:) = ftsoil(1,isoil_nudge,:)                     &
-     &  -timestep/tau_soil_nudge*(ftsoil(1,isoil_nudge,:)-Tsoil_nudge)
-      ENDIF
-
-!---------------------------------------------------------------------
-!   Add large-scale tendencies (advection, etc) :
-!---------------------------------------------------------------------
-
-!cc nrlmd
-!cc        tmpvar=teta
-!cc        call advect_vert(llm,omega,timestep,tmpvar,plev)
-!cc
-!cc        teta(1:mxcalc)=tmpvar(1:mxcalc)
-!cc        tmpvar(:)=q(:,1)
-!cc        call advect_vert(llm,omega,timestep,tmpvar,plev)
-!cc        q(1:mxcalc,1)=tmpvar(1:mxcalc)
-!cc        tmpvar(:)=q(:,2)
-!cc        call advect_vert(llm,omega,timestep,tmpvar,plev)
-!cc        q(1:mxcalc,2)=tmpvar(1:mxcalc)
-
-   END IF ! end if tendency of tendency should be added
-
-!---------------------------------------------------------------------
-!   Air temperature :
-!---------------------------------------------------------------------        
-        if (lastcall) then
-          print*,'Pas de temps final ',it
-          call ju2ymds(daytime, an, mois, jour, heure)
-          print*,'a la date : a m j h',an, mois, jour ,heure/3600.
-        endif
-
-!  incremente day time
-!        print*,'daytime bef',daytime,1./day_step
-        daytime = daytime+1./day_step
-!Al1dbg
-        day = int(daytime+0.1/day_step)
-!        time = max(daytime-day,0.0)
-!Al1&jyg: correction de bug
-!cc        time = real(mod(it,day_step))/day_step
-        time = time_ini/24.+real(mod(it,day_step))/day_step
-!        print*,'daytime nxt time',daytime,time
-        it=it+1
-
-      enddo
-
-!Al1
-      if (ecrit_slab_oc.ne.-1) close(97)
-
-!Al1 Call to 1D equivalent of dynredem (an,mois,jour,heure ?)
-! -------------------------------------
-       call dyn1dredem("restart1dyn.nc",                                    &
-     &              plev,play,phi,phis,presnivs,                            &
-     &              u,v,temp,q,omega2)
-
-        CALL abort_gcm ('lmdz1d   ','The End  ',0)
-
-      end
 
 #include "1DUTILS.h"
