Changeset 1563 for LMDZ5/trunk/libf/dyn3d

Timestamp:

Aug 29, 2011, 3:32:52 PM (13 years ago)

Author:

jghattas

Message:

• Added reading of paramter type_trac from *.def file : type_trac=lmdz(default), inca or repr(soon). While running with INCA, 2 parameters are now necessare in .def : type_trac=inca and config_inca=aero/chem. If type_trac=lmdz or repr, config_inca will not be used.

• Removed print of ecrit_mth, ecrit_day etc in physiq.F. Removed the variable ecrit_hf2mth which is no longer used.

Location:

LMDZ5/trunk/libf/dyn3d

Files:

• ce0l.F90 (modified) (1 diff)
• conf_gcm.F (modified) (5 diffs)
• dynredem.F (modified) (4 diffs)
• gcm.F (modified) (2 diffs)
• infotrac.F90 (modified) (4 diffs)

LMDZ5/trunk/libf/dyn3d/ce0l.F90

@@ -67 +67 @@
 #endif
 
-  IF (config_inca /= 'none') THEN
+  IF (type_trac == 'inca') THEN
 #ifdef INCA
     CALL init_const_lmdz(nbtr,anneeref,dayref,iphysiq,day_step,nday)

LMDZ5/trunk/libf/dyn3d/conf_gcm.F

@@ -13 +13 @@
       use ioipsl_getincom
 #endif
+      USE infotrac, ONLY : type_trac
       IMPLICIT NONE
 c-----------------------------------------------------------------------
@@ -571 +572 @@
        offline = .FALSE.
        CALL getin('offline',offline)
+     
+!Config  Key  = type_trac
+!Config  Desc = Choix de couplage avec model de chimie INCA ou REPROBUS
+!Config  Def  = lmdz
+!Config  Help = 
+!Config         'lmdz' = pas de couplage, pur LMDZ
+!Config         'inca' = model de chime INCA 
+!Config         'repr' = model de chime REPROBUS
+      type_trac = 'lmdz'
+      CALL getin('type_trac',type_trac)
 
 !Config  Key  = config_inca
@@ -643 +654 @@
       write(lunout,*)' tauyy = ', tauyy
       write(lunout,*)' offline = ', offline
+      write(lunout,*)' type_trac = ', type_trac
       write(lunout,*)' config_inca = ', config_inca
       write(lunout,*)' ok_dynzon = ', ok_dynzon 
@@ -761 +773 @@
        offline = .FALSE.
        CALL getin('offline',offline)
+
+!Config  Key  = type_trac
+!Config  Desc = Choix de couplage avec model de chimie INCA ou REPROBUS
+!Config  Def  = lmdz
+!Config  Help = 
+!Config         'lmdz' = pas de couplage, pur LMDZ
+!Config         'inca' = model de chime INCA 
+!Config         'repr' = model de chime REPROBUS
+      type_trac = 'lmdz'
+      CALL getin('type_trac',type_trac)
 
 !Config  Key  = config_inca
@@ -886 +908 @@
       write(lunout,*)' tauy = ', tauy
       write(lunout,*)' offline = ', offline
+      write(lunout,*)' type_trac = ', type_trac
       write(lunout,*)' config_inca = ', config_inca
       write(lunout,*)' ok_dynzon = ', ok_dynzon

LMDZ5/trunk/libf/dyn3d/dynredem.F

@@ -641 +641 @@
 #endif
 
-      IF (config_inca /= 'none') THEN
+      IF (type_trac == 'inca') THEN
 ! Ajout Anne pour lecture valeurs traceurs dans un fichier start_trac.nc
          ierr_file = NF_OPEN ("start_trac.nc", NF_NOWRITE,nid_trac)
@@ -654 +654 @@
       do iq=1,nqtot 
 
-         IF (config_inca == 'none') THEN
+         IF (type_trac /= 'inca') THEN
             ierr = NF_INQ_VARID(nid, tname(iq), nvarid)
             IF (ierr .NE. NF_NOERR) THEN
@@ -666 +666 @@
             ierr = NF_PUT_VAR_REAL (nid,nvarid,q(1,1,iq))
 #endif
-        ELSE ! config_inca = 'chem' ou 'aero'
+        ELSE ! type_trac = inca
 ! lecture de la valeur du traceur dans start_trac.nc
            IF (ierr_file .ne. 2) THEN
@@ -730 +730 @@
 #endif
           ENDIF ! (ierr_file .ne. 2)
-       END IF   ! config_inca
+       END IF   !type_trac
       
       ENDDO

LMDZ5/trunk/libf/dyn3d/gcm.F

@@ -212 +212 @@
 c-----------------------------------------------------------------------
 
-      IF (config_inca /= 'none') THEN
+      IF (type_trac == 'inca') THEN
 #ifdef INCA
       call init_const_lmdz(nbtr,anneeref,dayref,iphysiq,day_step,nday, 
@@ -263 +263 @@
       endif ! of if (read_start)
 
-      IF (config_inca /= 'none') THEN
+      IF (type_trac == 'inca') THEN
 #ifdef INCA
          call init_inca_dim(klon,llm,iim,jjm,

LMDZ5/trunk/libf/dyn3d/infotrac.F90

@@ -32 +32 @@
   SUBROUTINE infotrac_init
     USE control_mod
+
     IMPLICIT NONE
 !=======================================================================
@@ -85 +86 @@
     
 
-    IF (config_inca=='none') THEN
-       type_trac='lmdz'
+    ! Coherence test between parameter type_trac and config_inca
+    IF (type_trac=='inca') THEN
+       WRITE(lunout,*) 'You have choosen to couple with INCA chemestry model : type_trac=', &
+            type_trac,' config_inca=',config_inca
+       IF (config_inca/='aero' .AND. config_inca/='chem') THEN
+          WRITE(lunout,*) 'Incoherence between type_trac and config_inca. Model stops. Modify run.def'
+          CALL abort_gcm('infotrac_init','Incoherence between type_trac and config_inca',1)
+       END IF
+    ELSE IF (type_trac == 'lmdz') THEN
+       WRITE(lunout,*) 'Tracers are treated in LMDZ only : type_trac=', type_trac
     ELSE
-       type_trac='inca'
-    END IF
+       WRITE(lunout,*) 'type_trac=',type_trac,' not possible. Model stops'
+       CALL abort_gcm('infotrac_init','bad parameter',1)
+    END IF
+
+
+    ! Test if config_inca is other then none for run without INCA
+    IF (type_trac/='inca' .AND. config_inca/='none') THEN
+       WRITE(lunout,*) 'config_inca will now be changed to none as you do not couple with INCA model'
+       config_inca='none'
+    END IF
+
 
 !-----------------------------------------------------------------------
@@ -119 +137 @@
          nbtr=nqtrue
        endif
-    ELSE
-       ! nbtr has been read from INCA by init_cont_lmdz() in gcm.F 
+    ELSE ! type_trac=inca
+       ! nbtr has been read from INCA by init_const_lmdz() in gcm.F 
        nqtrue=nbtr+2
     END IF
@@ -128 +146 @@
        CALL abort_gcm('infotrac_init','Not enough tracers',1)
     END IF
+    
+       
 !
 ! Allocate variables depending on nqtrue and nbtr