source: LMDZ6/trunk/libf/phylmdiso/surf_landice_mod.F90 @ 4933

Last change on this file since 4933 was 4835, checked in by evignon, 9 months ago

commission pour la suite du travail sur la mise a jour
de la param de neige soufflee

File size: 25.9 KB
Line 
1!
2MODULE surf_landice_mod
3 
4  IMPLICIT NONE
5
6CONTAINS
7!
8!****************************************************************************************
9!
10  SUBROUTINE surf_landice(itime, dtime, knon, knindex, &
11       rlon, rlat, debut, lafin, &
12       rmu0, lwdownm, albedo, pphi1, &
13       swnet, lwnet, tsurf, p1lay, &
14       cdragh, cdragm, precip_rain, precip_snow, precip_bs, temp_air, spechum, &
15       AcoefH, AcoefQ, BcoefH, BcoefQ, &
16       AcoefU, AcoefV, BcoefU, BcoefV, &
17       AcoefQBS, BcoefQBS, &
18       ps, u1, v1, gustiness, rugoro, pctsrf, &
19       snow, qsurf, qsol, qbs1, agesno, &
20       tsoil, z0m, z0h, SFRWL, alb_dir, alb_dif, evap, fluxsens, fluxlat, fluxbs, &
21       tsurf_new, dflux_s, dflux_l, &
22       alt, slope, cloudf, &
23       snowhgt, qsnow, to_ice, sissnow, &
24       alb3, runoff, &
25       flux_u1, flux_v1 &
26#ifdef ISO
27         &      ,xtprecip_rain, xtprecip_snow,xtspechum,Rland_ice &
28         &      ,xtsnow,xtsol,xtevap &
29#endif               
30           &    )
31
32    USE dimphy
33    USE surface_data,     ONLY : type_ocean, calice, calsno, landice_opt, iflag_albcalc
34    USE fonte_neige_mod,  ONLY : fonte_neige,run_off_lic,fqcalving_global,ffonte_global,fqfonte_global,runofflic_global
35    USE cpl_mod,          ONLY : cpl_send_landice_fields
36    USE calcul_fluxs_mod
37    USE phys_local_var_mod, ONLY : zxrhoslic, zxustartlic, zxqsaltlic
38    USE phys_output_var_mod, ONLY : snow_o,zfra_o
39#ifdef ISO   
40    USE fonte_neige_mod,  ONLY : xtrun_off_lic
41    USE infotrac_phy, ONLY : ntiso,niso
42    USE isotopes_routines_mod, ONLY: calcul_iso_surf_lic_vectall
43#ifdef ISOVERIF
44    use isotopes_mod, ONLY: iso_eau,ridicule
45    use isotopes_verif_mod
46#endif
47#endif
48    USE geometry_mod,     ONLY : longitude,latitude
49
50!FC
51    USE ioipsl_getin_p_mod, ONLY : getin_p
52    USE lmdz_blowing_snow_ini, ONLY : c_esalt_bs, zeta_bs, pbst_bs, prt_bs, rhoice_bs, rhohard_bs
53    USE lmdz_blowing_snow_ini, ONLY : rhofresh_bs, tau_eqsalt_bs, tau_dens0_bs, tau_densmin_bs
54#ifdef CPP_INLANDSIS
55    USE surf_inlandsis_mod,  ONLY : surf_inlandsis
56#endif
57
58    USE indice_sol_mod
59
60!    INCLUDE "indicesol.h"
61    INCLUDE "dimsoil.h"
62    INCLUDE "YOMCST.h"
63    INCLUDE "clesphys.h"
64
65! Input variables
66!****************************************************************************************
67    INTEGER, INTENT(IN)                           :: itime, knon
68    INTEGER, DIMENSION(klon), INTENT(in)          :: knindex
69    REAL, INTENT(in)                              :: dtime
70    REAL, DIMENSION(klon), INTENT(IN)             :: swnet ! net shortwave radiance
71    REAL, DIMENSION(klon), INTENT(IN)             :: lwnet ! net longwave radiance
72    REAL, DIMENSION(klon), INTENT(IN)             :: tsurf
73    REAL, DIMENSION(klon), INTENT(IN)             :: p1lay
74    REAL, DIMENSION(klon), INTENT(IN)             :: cdragh, cdragm
75    REAL, DIMENSION(klon), INTENT(IN)             :: precip_rain, precip_snow, precip_bs
76    REAL, DIMENSION(klon), INTENT(IN)             :: temp_air, spechum
77    REAL, DIMENSION(klon), INTENT(IN)             :: AcoefH, AcoefQ
78    REAL, DIMENSION(klon), INTENT(IN)             :: BcoefH, BcoefQ
79    REAL, DIMENSION(klon), INTENT(IN)             :: AcoefU, AcoefV, BcoefU, BcoefV
80    REAL, DIMENSION(klon), INTENT(IN)             :: AcoefQBS, BcoefQBS
81    REAL, DIMENSION(klon), INTENT(IN)             :: ps
82    REAL, DIMENSION(klon), INTENT(IN)             :: u1, v1, gustiness, qbs1
83    REAL, DIMENSION(klon), INTENT(IN)             :: rugoro
84    REAL, DIMENSION(klon,nbsrf), INTENT(IN)       :: pctsrf
85#ifdef ISO
86    REAL, DIMENSION(ntiso,klon), INTENT(IN)       :: xtprecip_rain, xtprecip_snow
87    REAL, DIMENSION(ntiso,klon), INTENT(IN)       :: xtspechum
88#endif
89
90    LOGICAL,  INTENT(IN)                          :: debut   !true if first step
91    LOGICAL,  INTENT(IN)                          :: lafin   !true if last step
92    REAL, DIMENSION(klon), INTENT(IN)             :: rlon, rlat
93    REAL, DIMENSION(klon), INTENT(IN)             :: rmu0
94    REAL, DIMENSION(klon), INTENT(IN)             :: lwdownm !ylwdown
95    REAL, DIMENSION(klon), INTENT(IN)             :: albedo  !mean albedo
96    REAL, DIMENSION(klon), INTENT(IN)             :: pphi1   
97    REAL, DIMENSION(klon), INTENT(IN)             :: alt   !mean altitude of the grid box 
98    REAL, DIMENSION(klon), INTENT(IN)             :: slope   !mean slope in grid box 
99    REAL, DIMENSION(klon), INTENT(IN)             :: cloudf  !total cloud fraction
100
101! In/Output variables
102!****************************************************************************************
103    REAL, DIMENSION(klon), INTENT(INOUT)          :: snow, qsol
104    REAL, DIMENSION(klon), INTENT(INOUT)          :: agesno
105    REAL, DIMENSION(klon, nsoilmx), INTENT(INOUT) :: tsoil
106#ifdef ISO
107    REAL, DIMENSION(niso,klon), INTENT(INOUT)          :: xtsnow, xtsol
108    REAL, DIMENSION(niso,klon), INTENT(INOUT)        :: Rland_ice
109#endif
110
111! Output variables
112!****************************************************************************************
113    REAL, DIMENSION(klon), INTENT(OUT)            :: qsurf
114    REAL, DIMENSION(klon), INTENT(OUT)            :: z0m, z0h
115!albedo SB >>>
116!    REAL, DIMENSION(klon), INTENT(OUT)            :: alb1  ! new albedo in visible SW interval
117!    REAL, DIMENSION(klon), INTENT(OUT)            :: alb2  ! new albedo in near IR interval
118    REAL, DIMENSION(6), INTENT(IN)                :: SFRWL
119    REAL, DIMENSION(klon,nsw), INTENT(OUT)        :: alb_dir,alb_dif
120!albedo SB <<<
121    REAL, DIMENSION(klon), INTENT(OUT)            :: evap, fluxsens, fluxlat
122    REAL, DIMENSION(klon), INTENT(OUT)            :: fluxbs
123    REAL, DIMENSION(klon), INTENT(OUT)            :: tsurf_new
124    REAL, DIMENSION(klon), INTENT(OUT)            :: dflux_s, dflux_l     
125    REAL, DIMENSION(klon), INTENT(OUT)            :: flux_u1, flux_v1
126
127    REAL, DIMENSION(klon), INTENT(OUT)           :: alb3
128    REAL, DIMENSION(klon), INTENT(OUT)           :: qsnow   !column water in snow [kg/m2]
129    REAL, DIMENSION(klon), INTENT(OUT)           :: snowhgt !Snow height (m)
130    REAL, DIMENSION(klon), INTENT(OUT)           :: to_ice
131    REAL, DIMENSION(klon), INTENT(OUT)           :: sissnow
132    REAL, DIMENSION(klon), INTENT(OUT)           :: runoff  !Land ice runoff
133#ifdef ISO
134    REAL, DIMENSION(ntiso,klon), INTENT(OUT)     :: xtevap     
135!    real, DIMENSION(niso,klon) :: xtrun_off_lic_0_diag ! est une variable globale de
136!    fonte_neige
137#endif
138 
139
140! Local variables
141!****************************************************************************************
142    REAL, DIMENSION(klon)    :: soilcap, soilflux
143    REAL, DIMENSION(klon)    :: cal, beta, dif_grnd
144    REAL, DIMENSION(klon)    :: zfra, alb_neig
145    REAL, DIMENSION(klon)    :: radsol
146    REAL, DIMENSION(klon)    :: u0, v0, u1_lay, v1_lay, ustar
147    INTEGER                  :: i,j,nt
148    REAL, DIMENSION(klon)    :: fqfonte,ffonte
149    REAL, DIMENSION(klon)    :: run_off_lic_frac
150#ifdef ISO       
151      real, parameter :: t_coup = 273.15
152      real, dimension(klon) :: fqfonte_diag
153      real, dimension(klon) :: fq_fonte_diag
154      real, dimension(klon) ::  snow_evap_diag
155      real, dimension(klon) ::  fqcalving_diag
156      real max_eau_sol_diag 
157      real, dimension(klon) ::  runoff_diag
158      real, dimension(klon) ::    run_off_lic_diag
159      real ::  coeff_rel_diag
160      integer ixt
161      REAL, DIMENSION(niso,klon) :: xtsnow_prec,xtsol_prec
162      REAL, DIMENSION(klon) :: snow_prec,qsol_prec
163!      real, DIMENSION(klon) :: run_off_lic_0_diag
164#endif
165
166    REAL, DIMENSION(klon)    :: emis_new                  !Emissivity
167    REAL, DIMENSION(klon)    :: swdown,lwdown
168    REAL, DIMENSION(klon)    :: precip_snow_adv, snow_adv !Snow Drift precip./advection (not used in inlandsis)
169    REAL, DIMENSION(klon)    :: erod                      !erosion of surface snow (flux, kg/m2/s like evap)
170    REAL, DIMENSION(klon)    :: zsl_height, wind_velo     !surface layer height, wind spd
171    REAL, DIMENSION(klon)    :: dens_air,  snow_cont_air  !air density; snow content air
172    REAL, DIMENSION(klon)    :: alb_soil                  !albedo of underlying ice
173    REAL, DIMENSION(klon)    :: pexner                    !Exner potential
174    REAL                     :: pref
175    REAL, DIMENSION(klon,nsoilmx) :: tsoil0               !modif
176    REAL                          :: dtis                ! subtimestep
177    LOGICAL                       :: debut_is, lafin_is  ! debut and lafin for inlandsis
178
179    CHARACTER (len = 20)                      :: modname = 'surf_landice'
180    CHARACTER (len = 80)                      :: abort_message
181
182
183    REAL,DIMENSION(klon) :: alb1,alb2
184    REAL,DIMENSION(klon) :: precip_totsnow, evap_totsnow
185    REAL, DIMENSION (klon,6) :: alb6
186    REAL                   :: esalt
187    REAL                   :: lambdasalt,fluxsalt, csalt, nunu, aa, bb, cc
188    REAL                   :: tau_dens, maxerosion, fluxbs_2
189    REAL, DIMENSION(klon)  :: ws1, rhod, rhos, ustart0, ustart, qsalt, hsalt
190
191! End definition
192!****************************************************************************************
193!FC
194!FC
195   REAL,SAVE :: alb_vis_sno_lic
196  !$OMP THREADPRIVATE(alb_vis_sno_lic)
197   REAL,SAVE :: alb_nir_sno_lic
198  !$OMP THREADPRIVATE(alb_nir_sno_lic)
199  LOGICAL, SAVE :: firstcall = .TRUE.
200  !$OMP THREADPRIVATE(firstcall)
201
202
203!FC firtscall initializations
204!******************************************************************************************
205#ifdef ISO
206#ifdef ISOVERIF
207!     write(*,*) 'surf_land_ice 1499'   
208     do i=1,knon
209        if (iso_eau.gt.0) then
210             call iso_verif_egalite_choix(xtsnow(iso_eau,i),snow(i), &
211    &            'surf_land_ice 126',errmax,errmaxrel)
212        endif !if (iso_eau.gt.0) then     
213      enddo !do i=1,knon 
214#endif
215#endif
216
217  IF (firstcall) THEN
218  alb_vis_sno_lic=0.77
219  CALL getin_p('alb_vis_sno_lic',alb_vis_sno_lic)
220           PRINT*, 'alb_vis_sno_lic',alb_vis_sno_lic
221  alb_nir_sno_lic=0.77
222  CALL getin_p('alb_nir_sno_lic',alb_nir_sno_lic)
223           PRINT*, 'alb_nir_sno_lic',alb_nir_sno_lic
224 
225  firstcall=.false.
226  ENDIF
227!******************************************************************************************
228
229! Initialize output variables
230    alb3(:) = 999999.
231    alb2(:) = 999999.
232    alb1(:) = 999999.
233    fluxbs(:)=0. 
234    runoff(:) = 0.
235!****************************************************************************************
236! Calculate total absorbed radiance at surface
237!
238!****************************************************************************************
239    radsol(:) = 0.0
240    radsol(1:knon) = swnet(1:knon) + lwnet(1:knon)
241
242!****************************************************************************************
243
244!****************************************************************************************
245!  landice_opt = 0 : soil_model, calcul_flux, fonte_neige, ... 
246!  landice_opt = 1  : prepare and call INterace Lmdz SISvat (INLANDSIS)
247!****************************************************************************************
248
249
250    IF (landice_opt .EQ. 1) THEN
251
252!****************************************************************************************   
253! CALL to INLANDSIS interface
254!****************************************************************************************
255#ifdef CPP_INLANDSIS
256
257#ifdef ISO
258        CALL abort_gcm('surf_landice 235','isotopes pas dans INLANDSIS',1)
259#endif
260
261        debut_is=debut
262        lafin_is=.false.
263        ! Suppose zero surface speed
264        u0(:)            = 0.0
265        v0(:)            = 0.0
266
267
268        CALL calcul_flux_wind(knon, dtime, &
269         u0, v0, u1, v1, gustiness, cdragm, &
270         AcoefU, AcoefV, BcoefU, BcoefV, &
271         p1lay, temp_air, &
272         flux_u1, flux_v1)
273
274       
275       ! Set constants and compute some input for SISVAT
276       ! = 1000 hPa
277       ! and calculate incoming flux for SW and LW interval: swdown, lwdown
278       swdown(:)        = 0.0
279       lwdown(:)        = 0.0
280       snow_cont_air(:) = 0.  ! the snow content in air is not a prognostic variable of the model     
281       alb_soil(:)      = 0.4 ! before albedo(:) but here it is the ice albedo that we have to set
282       ustar(:)         = 0.
283       pref             = 100000.       
284       DO i = 1, knon
285          swdown(i)        = swnet(i)/(1-albedo(i))
286          lwdown(i)        = lwdownm(i)
287          wind_velo(i)     = u1(i)**2 + v1(i)**2
288          wind_velo(i)     = wind_velo(i)**0.5
289          pexner(i)        = (p1lay(i)/pref)**(RD/RCPD)
290          dens_air(i)      = p1lay(i)/RD/temp_air(i)  ! dry air density
291          zsl_height(i)    = pphi1(i)/RG     
292          tsoil0(i,:)      = tsoil(i,:) 
293          ustar(i)= (cdragm(i)*(wind_velo(i)**2))**0.5   
294       END DO
295       
296
297
298        dtis=dtime
299
300          IF (lafin) THEN
301            lafin_is=.true.
302          END IF
303
304          CALL surf_inlandsis(knon, rlon, rlat, knindex, itime, dtis, debut_is, lafin_is,&
305            rmu0, swdown, lwdown, albedo, pexner, ps, p1lay, precip_rain, precip_snow,   &
306            zsl_height, wind_velo, ustar, temp_air, dens_air, spechum, tsurf,&
307            rugoro, snow_cont_air, alb_soil, alt, slope, cloudf, &
308            radsol, qsol, tsoil0, snow, zfra, snowhgt, qsnow, to_ice, sissnow,agesno,   &
309            AcoefH, AcoefQ, BcoefH, BcoefQ, cdragm, cdragh, &
310            run_off_lic, fqfonte, ffonte, evap, erod, fluxsens, fluxlat,dflux_s, dflux_l, &
311            tsurf_new, alb1, alb2, alb3, alb6, &
312            emis_new, z0m, z0h, qsurf)
313
314          debut_is=.false.
315
316
317        ! Treatment of snow melting and calving
318
319        ! for consistency with standard LMDZ, add calving to run_off_lic
320        run_off_lic(:)=run_off_lic(:) + to_ice(:)
321
322        DO i = 1, knon
323           ffonte_global(knindex(i),is_lic)    = ffonte(i)
324           fqfonte_global(knindex(i),is_lic)   = fqfonte(i)! net melting= melting - refreezing
325           fqcalving_global(knindex(i),is_lic) = to_ice(i) ! flux
326           runofflic_global(knindex(i)) = run_off_lic(i)
327        ENDDO
328        ! Here, we assume that the calving term is equal to the to_ice term
329        ! (no ice accumulation)
330
331
332#else
333       abort_message='Pb de coherence: landice_opt = 1  mais CPP_INLANDSIS = .false.'
334       CALL abort_physic(modname,abort_message,1)
335#endif
336
337
338    ELSE
339
340!****************************************************************************************
341! Soil calculations
342!
343!****************************************************************************************
344
345    ! EV: use calbeta
346    CALL calbeta(dtime, is_lic, knon, snow, qsol, beta, cal, dif_grnd)
347
348
349    ! use soil model and recalculate properly cal
350    IF (soil_model) THEN
351       CALL soil(dtime, is_lic, knon, snow, tsurf, qsol, &
352        & longitude(knindex(1:knon)), latitude(knindex(1:knon)), tsoil, soilcap, soilflux)
353       cal(1:knon) = RCPD / soilcap(1:knon)
354       radsol(1:knon)  = radsol(1:knon) + soilflux(1:knon)
355    ELSE
356       cal = RCPD * calice
357       WHERE (snow > 0.0) cal = RCPD * calsno
358    ENDIF
359
360
361!****************************************************************************************
362! Calulate fluxes
363!
364!****************************************************************************************
365!    beta(:) = 1.0
366!    dif_grnd(:) = 0.0
367
368! Suppose zero surface speed
369    u0(:)=0.0
370    v0(:)=0.0
371    u1_lay(:) = u1(:) - u0(:)
372    v1_lay(:) = v1(:) - v0(:)
373
374    CALL calcul_fluxs(knon, is_lic, dtime, &
375         tsurf, p1lay, cal, beta, cdragh, cdragh, ps, &
376         precip_rain, precip_snow, snow, qsurf,  &
377         radsol, dif_grnd, temp_air, spechum, u1_lay, v1_lay, gustiness, &
378         1.,AcoefH, AcoefQ, BcoefH, BcoefQ, &
379         tsurf_new, evap, fluxlat, fluxsens, dflux_s, dflux_l)
380
381
382#ifdef ISO
383   ! verif
384#ifdef ISOVERIF
385     !write(*,*) 'surf_land_ice 1499'   
386     do i=1,knon
387       if (iso_eau.gt.0) then
388           if (snow(i).gt.ridicule) then
389             call iso_verif_egalite_choix(xtsnow(iso_eau,i),snow(i), &
390    &            'surf_land_ice 1151',errmax,errmaxrel)
391            endif !if ((snow(i).gt.ridicule)) then
392        endif !if (iso_eau.gt.0) then     
393      enddo !do i=1,knon 
394#endif
395!#ifdef ISOVERIF
396
397    do i=1,knon
398      snow_prec(i)=snow(i)
399      do ixt=1,niso
400      xtsnow_prec(ixt,i)=xtsnow(ixt,i)
401      enddo !do ixt=1,niso
402      ! initialisation:
403      fq_fonte_diag(i)=0.0
404      fqfonte_diag(i)=0.0
405      snow_evap_diag(i)=0.0
406    enddo !do i=1,knon
407#endif         
408!#ifdef ISO
409    CALL calcul_flux_wind(knon, dtime, &
410         u0, v0, u1, v1, gustiness, cdragm, &
411         AcoefU, AcoefV, BcoefU, BcoefV, &
412         p1lay, temp_air, &
413         flux_u1, flux_v1)
414
415
416!****************************************************************************************
417! Calculate albedo
418!
419!****************************************************************************************
420
421!
422!IM: plusieurs choix/tests sur l'albedo des "glaciers continentaux"
423!       alb1(1 : knon)  = 0.6 !IM cf FH/GK
424!       alb1(1 : knon)  = 0.82
425!       alb1(1 : knon)  = 0.77 !211003 Ksta0.77
426!       alb1(1 : knon)  = 0.8 !KstaTER0.8 & LMD_ARMIP5
427!IM: KstaTER0.77 & LMD_ARMIP6   
428
429! Attantion: alb1 and alb2 are not the same!
430    alb1(1:knon)  = alb_vis_sno_lic
431    alb2(1:knon)  = alb_nir_sno_lic
432
433
434!****************************************************************************************
435! Rugosity
436!
437!****************************************************************************************
438    z0m = z0m_landice
439    z0h = z0h_landice
440    !z0m = SQRT(z0m**2+rugoro**2)
441
442
443!****************************************************************************************
444! Simple blowing snow param
445!****************************************************************************************
446! we proceed in 2 steps:
447! first we erode - if possible -the accumulated snow during the time step
448! then we update the density of the underlying layer and see if we can also erode
449! this layer
450
451
452   if (ok_bs) then
453       fluxbs(:)=0.
454       do j=1,klon
455          ws1(j)=(u1(j)**2+v1(j)**2)**0.5
456          ustar(j)=(cdragm(j)*(u1(j)**2+v1(j)**2))**0.5
457          rhod(j)=p1lay(j)/RD/temp_air(j)
458          ustart0(j) =(log(2.868)-log(1.625))/0.085*sqrt(cdragm(j))
459       enddo
460
461       ! 1st step: erosion of fresh snow accumulated during the time step
462       do j=1, knon
463
464           rhos(j)=rhofresh_bs
465           ! blowing snow flux formula used in MAR
466           ustart(j)=ustart0(j)*exp(max(rhoice_bs/rhofresh_bs-rhoice_bs/rhos(j),0.))*exp(max(0.,rhos(j)-rhohard_bs))
467           ! we have multiplied by exp to prevent erosion when rhos>rhohard_bs
468           ! computation of qbs at the top of the saltation layer
469           ! default formulation from MAR model (Amory et al. 2021, Gallee et al. 2001)
470           esalt=1./(c_esalt_bs*max(1.e-6,ustar(j)))
471           hsalt(j)=0.08436*(max(1.e-6,ustar(j))**1.27)
472           qsalt(j)=(max(ustar(j)**2-ustart(j)**2,0.))/(RG*hsalt(j))*esalt
473           ! calculation of erosion (flux positive towards the surface here)
474           ! consistent with implicit resolution of turbulent mixing equation
475           ! Nemoto and Nishimura 2004 show that steady-state saltation is achieved within a time tau_eqsalt_bs of about 10s
476           ! we thus prevent snowerosion (snow particle transfer from the saltation layer to the first model level)
477           ! integrated over tau_eqsalt_bs to exceed the total mass of snow particle in the saltation layer
478           ! (rho*qsalt*hsalt)
479           ! during this first step we also lower bound the erosion to the amount of fresh snow accumulated during the time step
480           maxerosion=min(precip_snow(j),hsalt(j)*qsalt(j)*rhod(j)/tau_eqsalt_bs)
481
482           fluxbs(j)=rhod(j)*ws1(j)*cdragm(j)*(AcoefQBS(j)-qsalt(j)) &
483                   / (1.-rhod(j)*ws1(j)*cdragm(j)*BcoefQBS(j)*dtime)
484           !fluxbs(j)= rhod*ws1(j)*cdragm(j)*(qbs1(j)-qsalt(j))
485           fluxbs(j)=max(-maxerosion,fluxbs(j))
486       enddo
487
488
489       ! we now compute the snow age of the overlying layer (snow surface after erosion of the fresh snow accumulated during the time step)
490       ! this is done through the routine albsno
491       CALL albsno(klon,knon,dtime,agesno(:),alb_neig(:), precip_snow(:)+fluxbs(:))
492
493       ! 2nd step:
494       ! computation of threshold friction velocity
495       ! which depends on surface snow density
496       do j = 1, knon
497           ! estimation of snow density
498           ! snow density increases with snow age and
499           ! increases even faster in case of sedimentation of blowing snow or rain
500           tau_dens=max(tau_densmin_bs, tau_dens0_bs*exp(-abs(precip_bs(j))/pbst_bs - &
501                    abs(precip_rain(j))/prt_bs)*exp(-max(tsurf(j)-RTT,0.)))
502           rhos(j)=rhofresh_bs+(rhohard_bs-rhofresh_bs)*(1.-exp(-agesno(j)*86400.0/tau_dens))
503           ! blowing snow flux formula used in MAR
504           ustart(j)=ustart0(j)*exp(max(rhoice_bs/rhofresh_bs-rhoice_bs/rhos(j),0.))*exp(max(0.,rhos(j)-rhohard_bs))
505           ! we have multiplied by exp to prevent erosion when rhos>rhohard_bs
506           ! computation of qbs at the top of the saltation layer
507           ! default formulation from MAR model (Amory et al. 2021, Gallee et al. 2001)
508           esalt=c_esalt_bs*ustar(j)
509           hsalt(j)=0.08436*(max(1.e-6,ustar(j))**1.27)
510           qsalt(j)=(max(ustar(j)**2-ustart(j)**2,0.))/(RG*hsalt(j))*esalt
511           ! calculation of erosion (flux positive towards the surface here)
512           ! consistent with implicit resolution of turbulent mixing equation
513           ! Nemoto and Nishimura 2004 show that steady-state saltation is achieved within a time tau_eqsalt_bs of about 10s
514           ! we thus prevent snowerosion (snow particle transfer from the saltation layer to the first model level)
515           ! integrated over tau_eqsalt_bs to exceed the total mass of snow particle in the saltation layer
516           ! (rho*qsalt*hsalt)
517           maxerosion=hsalt(j)*qsalt(j)*rhod(j)/tau_eqsalt_bs
518           fluxbs_2=rhod(j)*ws1(j)*cdragm(j)*(AcoefQBS(j)-qsalt(j)) &
519                   / (1.-rhod(j)*ws1(j)*cdragm(j)*BcoefQBS(j)*dtime)
520           !fluxbs_2= rhod*ws1(j)*cdragm(j)*(qbs1(j)-qsalt(j))
521           fluxbs_2=max(-maxerosion,fluxbs_2)
522           fluxbs(j)=fluxbs(j)+fluxbs_2
523       enddo
524
525       ! for outputs       
526        do j=1, knon
527              i = knindex(j)
528              zxustartlic(i) = ustart(j)
529              zxrhoslic(i) = rhos(j)
530              zxqsaltlic(i)=qsalt(j)
531        enddo
532
533
534  else
535  ! those lines are useful to calculate the snow age
536       CALL albsno(klon,knon,dtime,agesno(:),alb_neig(:), precip_snow(:))
537
538  endif ! if ok_bs
539
540
541
542
543
544
545!****************************************************************************************
546! Calculate snow amount
547!   
548!****************************************************************************************
549    IF (ok_bs) THEN
550      precip_totsnow(:)=precip_snow(:)+precip_bs(:)
551      evap_totsnow(:)=evap(:)-fluxbs(:) ! flux bs is positive towards the surface (snow erosion)
552    ELSE
553      precip_totsnow(:)=precip_snow(:)
554      evap_totsnow(:)=evap(:)
555    ENDIF
556
557    CALL fonte_neige(knon, is_lic, knindex, dtime, &
558         tsurf, precip_rain, precip_totsnow, &
559         snow, qsol, tsurf_new, evap_totsnow &
560#ifdef ISO   
561     & ,fq_fonte_diag,fqfonte_diag,snow_evap_diag,fqcalving_diag   &
562     & ,max_eau_sol_diag,runoff_diag,run_off_lic_diag,coeff_rel_diag   &
563#endif
564     &   )
565
566
567#ifdef ISO
568#ifdef ISOVERIF
569      do i=1,knon 
570       if (iso_eau.gt.0) then 
571          call iso_verif_egalite_choix(Rland_ice(iso_eau,i),1.0, &
572     &         'surf_landice_mod 217',errmax,errmaxrel)
573       endif !if (iso_eau.gt.0) then   
574      enddo !do i=1,knon 
575#endif
576!#ifdef ISOVERIF
577
578       call calcul_iso_surf_lic_vectall(klon,knon, &
579     &           evap,snow_evap_diag,Tsurf_new,snow, &
580     &           fq_fonte_diag,fqfonte_diag,dtime,t_coup, &
581     &           precip_snow,xtprecip_snow,precip_rain,xtprecip_rain, snow_prec,xtsnow_prec, &
582     &           xtspechum,spechum,ps,Rland_ice, &
583     &           xtevap,xtsnow,fqcalving_diag, &
584     &           knindex,is_lic,run_off_lic_diag,coeff_rel_diag &
585     &  )
586
587!        call fonte_neige_export_xtrun_off_lic_0(knon,xtrun_off_lic_0_diag)
588
589#endif
590!#ifdef ISO
591
592
593    WHERE (snow(1 : knon) .LT. 0.0001) agesno(1 : knon) = 0.                                         
594    zfra(1:knon) = MAX(0.0,MIN(1.0,snow(1:knon)/(snow(1:knon)+10.0))) 
595
596
597    END IF ! landice_opt
598
599
600!****************************************************************************************
601! Send run-off on land-ice to coupler if coupled ocean.
602! run_off_lic has been calculated in fonte_neige or surf_inlandsis
603! If landice_opt>=2, corresponding call is done from surf_land_orchidee
604!****************************************************************************************
605    IF (type_ocean=='couple' .AND. landice_opt .LT. 2) THEN
606       ! Compress fraction where run_off_lic is active (here all pctsrf(is_lic))
607       run_off_lic_frac(:)=0.0
608       DO j = 1, knon
609          i = knindex(j)
610          run_off_lic_frac(j) = pctsrf(i,is_lic)
611       ENDDO
612
613       CALL cpl_send_landice_fields(itime, knon, knindex, run_off_lic, run_off_lic_frac)
614    ENDIF
615
616 ! transfer runoff rate [kg/m2/s](!) to physiq for output
617    runoff(1:knon)=run_off_lic(1:knon)/dtime
618
619       snow_o=0.
620       zfra_o = 0.
621       DO j = 1, knon
622           i = knindex(j)
623           snow_o(i) = snow(j)
624           zfra_o(i) = zfra(j)
625       ENDDO
626
627
628!albedo SB >>>
629     select case(NSW)
630     case(2)
631       alb_dir(1:knon,1)=alb1(1:knon)
632       alb_dir(1:knon,2)=alb2(1:knon)
633     case(4)
634       alb_dir(1:knon,1)=alb1(1:knon)
635       alb_dir(1:knon,2)=alb2(1:knon)
636       alb_dir(1:knon,3)=alb2(1:knon)
637       alb_dir(1:knon,4)=alb2(1:knon)
638     case(6)
639       alb_dir(1:knon,1)=alb1(1:knon)
640       alb_dir(1:knon,2)=alb1(1:knon)
641       alb_dir(1:knon,3)=alb1(1:knon)
642       alb_dir(1:knon,4)=alb2(1:knon)
643       alb_dir(1:knon,5)=alb2(1:knon)
644       alb_dir(1:knon,6)=alb2(1:knon)
645
646       IF ((landice_opt .EQ. 1) .AND. (iflag_albcalc .EQ. 2)) THEN
647       alb_dir(1:knon,1)=alb6(1:knon,1)
648       alb_dir(1:knon,2)=alb6(1:knon,2)
649       alb_dir(1:knon,3)=alb6(1:knon,3)
650       alb_dir(1:knon,4)=alb6(1:knon,4)
651       alb_dir(1:knon,5)=alb6(1:knon,5)
652       alb_dir(1:knon,6)=alb6(1:knon,6)
653       ENDIF
654
655     end select
656alb_dif=alb_dir
657!albedo SB <<<
658
659
660  END SUBROUTINE surf_landice
661!
662!****************************************************************************************
663!
664END MODULE surf_landice_mod
665
666
667
Note: See TracBrowser for help on using the repository browser.