Context Navigation

phys_output_mod.F90 @ 5089

Last change on this file since 5089 was 5023, checked in by Sebastien Nguyen, 4 months ago
change pbl_surface and associated routines to symlinks towards phylmd routines
File size: 28.8 KB

Line
1	! $Id: phys_output_mod.F90 3792 2021-01-04 17:01:25Z evignon $
2	!
3
4	MODULE phys_output_mod
5	USE indice_sol_mod
6	USE phys_output_var_mod
7	USE phys_output_write_mod, ONLY : phys_output_write
8	REAL, DIMENSION(nfiles),SAVE :: ecrit_files
9
10	! Abderrahmane 12 2007
11	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
12	!!! Ecreture des Sorties du modele dans les fichiers Netcdf :
13	! histmth.nc : moyennes mensuelles
14	! histday.nc : moyennes journalieres
15	! histhf.nc : moyennes toutes les 3 heures
16	! histins.nc : valeurs instantanees
17	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
18
19	CONTAINS
20
21	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
22	!!!!!!!!! Ouverture des fichier et definition des variable de sortie !!!!!!!!
23	!! histbeg, histvert et histdef
24	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
25
26	SUBROUTINE phys_output_open(rlon,rlat,pim,tabij,ipt,jpt,plon,plat, &
27	jjmp1,nlevSTD,clevSTD,rlevSTD, dtime, ok_veget, &
28	type_ocean, iflag_pbl,iflag_pbl_split,ok_mensuel,ok_journe, &
29	ok_hf,ok_instan,ok_LES,ok_ade,ok_aie, read_climoz, &
30	phys_out_filestations, &
31	aerosol_couple, flag_aerosol_strat, &
32	pdtphys, paprs, pphis, pplay, lmax_th, ptconv, ptconvth, ivap, &
33	d_u, d_t, qx, d_qx, zmasse, ok_sync)
34
35	USE iophy
36	USE dimphy
37	USE infotrac_phy, ONLY: nqtot, tracers, niso, ntraciso=>ntiso
38	USE strings_mod, ONLY: maxlen
39	USE ioipsl
40	USE phys_cal_mod, only : hour, calend
41	USE mod_phys_lmdz_para
42	!Martin
43	USE surface_data, ONLY : landice_opt
44	USE phys_output_ctrlout_mod
45	USE mod_grid_phy_lmdz, only: klon_glo,nbp_lon,nbp_lat
46	USE print_control_mod, ONLY: prt_level,lunout
47	USE vertical_layers_mod, ONLY: ap,bp,preff,presnivs, aps, bps, pseudoalt, presinter
48	USE time_phylmdz_mod, ONLY: day_ini, itau_phy, start_time, annee_ref, day_ref
49	! ug Pour les sorties XIOS
50	USE wxios
51	#ifdef ISO
52	USE isotopes_mod, ONLY: isoName,iso_HTO
53	#ifdef ISOTRAC
54	use isotrac_mod, only: index_zone,index_iso,strtrac
55	#endif
56	#endif
57
58	IMPLICIT NONE
59	include "clesphys.h"
60	include "alpale.h"
61	include "YOMCST.h"
62
63	! ug Nouveaux arguments n\'ecessaires au histwrite_mod:
64	INTEGER, INTENT(IN) :: ivap
65	INTEGER, DIMENSION(klon), INTENT(IN) :: lmax_th
66	LOGICAL, INTENT(IN) :: ok_sync
67	LOGICAL, DIMENSION(klon, klev), INTENT(IN) :: ptconv, ptconvth
68	REAL, INTENT(IN) :: pdtphys
69	REAL, DIMENSION(klon), INTENT(IN) :: pphis
70	REAL, DIMENSION(klon, klev), INTENT(IN) :: pplay, d_u, d_t
71	REAL, DIMENSION(klon, klev+1), INTENT(IN) :: paprs
72	REAL, DIMENSION(klon,klev,nqtot), INTENT(IN):: qx, d_qx
73	REAL, DIMENSION(klon, klev), INTENT(IN) :: zmasse
74
75
76	REAL,DIMENSION(klon),INTENT(IN) :: rlon
77	REAL,DIMENSION(klon),INTENT(IN) :: rlat
78	INTEGER, INTENT(IN) :: pim
79	INTEGER, DIMENSION(pim) :: tabij
80	INTEGER,DIMENSION(pim), INTENT(IN) :: ipt, jpt
81	REAL,DIMENSION(pim), INTENT(IN) :: plat, plon
82	REAL,DIMENSION(pim,2) :: plat_bounds, plon_bounds
83
84	INTEGER :: jjmp1
85	INTEGER :: nlevSTD, radpas
86	LOGICAL :: ok_mensuel, ok_journe, ok_hf, ok_instan
87	LOGICAL :: ok_LES,ok_ade,ok_aie
88	INTEGER :: flag_aerosol_strat
89	LOGICAL :: aerosol_couple
90	INTEGER, INTENT(IN):: read_climoz ! read ozone climatology
91	! Allowed values are 0, 1 and 2
92	! 0: do not read an ozone climatology
93	! 1: read a single ozone climatology that will be used day and night
94	! 2: read two ozone climatologies, the average day and night
95	! climatology and the daylight climatology
96
97	REAL :: dtime
98	INTEGER :: idayref
99	REAL :: zjulian_start, zjulian
100	CHARACTER(LEN=4), DIMENSION(nlevSTD) :: clevSTD
101	REAL, DIMENSION(nlevSTD) :: rlevSTD
102	INTEGER :: nsrf, k, iq, iff, i, j, ilev, itr, ixt, iiso, izone
103	INTEGER :: naero
104	LOGICAL :: ok_veget
105	INTEGER :: iflag_pbl
106	INTEGER :: iflag_pbl_split
107	CHARACTER(LEN=4) :: bb2
108	CHARACTER(LEN=2) :: bb3
109	CHARACTER(LEN=6) :: type_ocean
110	INTEGER, DIMENSION(nbp_lon*jjmp1) :: ndex2d
111	INTEGER, DIMENSION(nbp_lonjjmp1klev) :: ndex3d
112	INTEGER :: imin_ins, imax_ins
113	INTEGER :: jmin_ins, jmax_ins
114	INTEGER, DIMENSION(nfiles) :: phys_out_levmin, phys_out_levmax
115	INTEGER, DIMENSION(nfiles) :: phys_out_filelevels
116	CHARACTER(LEN=20), DIMENSION(nfiles) :: chtimestep = (/ 'Default', 'Default', 'Default', 'Default', 'Default', &
117	'Default', 'Default', 'Default', 'Default', 'Default' /)
118	LOGICAL, DIMENSION(nfiles) :: phys_out_filekeys
119	LOGICAL, DIMENSION(nfiles) :: phys_out_filestations
120
121	#ifdef ISO
122	CHARACTER(LEN=maxlen) :: outiso
123	CHARACTER(LEN=20) :: unit
124	#endif
125	CHARACTER(LEN=maxlen) :: tnam, lnam, dn
126	INTEGER :: flag(nfiles)
127
128	!!!!!!!!!! stockage dans une region limitee pour chaque fichier !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
129	! entre [phys_out_lonmin,phys_out_lonmax] et [phys_out_latmin,phys_out_latmax]
130	LOGICAL, DIMENSION(nfiles), SAVE :: &
131	phys_out_regfkey = [.FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE.]
132	REAL, DIMENSION(nfiles), SAVE :: &
133	phys_out_lonmin = [ -180., -180., -180., -180., -180., -180., -180., -180., -180., -180.], &
134	phys_out_lonmax = [ 180., 180., 180., 180., 180., 180., 180., 180., 180., 180.], &
135	phys_out_latmin = [ -90., -90., -90., -90., -90., -90., -90., -90., -90., -90.], &
136	phys_out_latmax = [ 90., 90., 90., 90., 90., 90., 90., 90., 90., 90.]
137	REAL, DIMENSION(klev,2) :: Ahyb_bounds, Bhyb_bounds
138	REAL, DIMENSION(klev+1) :: lev_index
139
140	! ug Variables utilis\'ees pour r\'ecup\'erer le calendrier pour xios
141	INTEGER :: x_an, x_mois, x_jour
142	REAL :: x_heure
143	INTEGER :: ini_an, ini_mois, ini_jour
144	REAL :: ini_heure
145	INTEGER :: ISW
146	REAL, DIMENSION(NSW) :: wl1_sun, wl2_sun !wavelength bounds (in um) for SW
147	REAL, DIMENSION(NSW) :: wn1_sun, wn2_sun !wavenumber bounds (in m-1) for SW
148	REAL, DIMENSION(NSW) :: spectband !mean wavenumb. of each sp.band
149	REAL, DIMENSION(NSW,2) :: spbnds_sun !bounds of spectband
150
151	WRITE(lunout,*) 'Debut phys_output_mod.F90'
152	! Initialisations (Valeurs par defaut
153
154	DO ilev=1,klev
155	Ahyb_bounds(ilev,1) = ap(ilev)
156	Ahyb_bounds(ilev,2) = ap(ilev+1)
157	Bhyb_bounds(ilev,1) = bp(ilev)
158	Bhyb_bounds(ilev,2) = bp(ilev+1)
159	lev_index(ilev) = REAL(ilev)
160	END DO
161	lev_index(klev+1) = REAL(klev+1)
162
163	IF (.NOT. ALLOCATED(o_trac)) ALLOCATE(o_trac(nqtot))
164	IF (.NOT. ALLOCATED(o_trac_cum)) ALLOCATE(o_trac_cum(nqtot))
165	ALLOCATE(o_dtr_the(nqtot),o_dtr_con(nqtot),o_dtr_lessi_impa(nqtot))
166	ALLOCATE(o_dtr_lessi_nucl(nqtot),o_dtr_insc(nqtot),o_dtr_bcscav(nqtot))
167	ALLOCATE(o_dtr_evapls(nqtot),o_dtr_ls(nqtot),o_dtr_trsp(nqtot))
168	ALLOCATE(o_dtr_sscav(nqtot),o_dtr_sat(nqtot),o_dtr_uscav(nqtot))
169	ALLOCATE(o_dtr_dry(nqtot),o_dtr_vdf(nqtot))
170
171	#ifdef ISO
172	ALLOCATE(o_xtprecip(ntraciso))
173	ALLOCATE(o_xtplul(ntraciso))
174	ALLOCATE(o_xtpluc(ntraciso))
175	ALLOCATE(o_xtevap(ntraciso))
176	ALLOCATE(o_xtevap_srf(ntraciso,4))
177	ALLOCATE(o_xtovap(ntraciso))
178	ALLOCATE(o_xtoliq(ntraciso))
179	ALLOCATE(o_xtcond(ntraciso))
180	ALLOCATE(o_xtrunoff_diag(ntraciso))
181	ALLOCATE(o_dxtdyn(ntraciso))
182	ALLOCATE(o_dxtldyn(ntraciso))
183	ALLOCATE(o_dxtcon(ntraciso))
184	ALLOCATE(o_dxtlsc(ntraciso))
185	ALLOCATE(o_dxteva(ntraciso))
186	ALLOCATE(o_dxtajs(ntraciso))
187	ALLOCATE(o_dxtvdf(ntraciso))
188	ALLOCATE(o_dxtthe(ntraciso))
189	ALLOCATE(o_dxtch4(ntraciso))
190	if (iso_HTO.gt.0) then
191	ALLOCATE(o_dxtprod_nucl(ntraciso))
192	ALLOCATE(o_dxtcosmo(ntraciso))
193	ALLOCATE(o_dxtdecroiss(ntraciso))
194	endif
195	#endif
196
197	levmax = (/ klev, klev, klev, klev, klev, klev, nlevSTD, nlevSTD, nlevSTD, klev /)
198
199	phys_out_filenames(1) = 'histmth'
200	phys_out_filenames(2) = 'histday'
201	phys_out_filenames(3) = 'histhf6h'
202	phys_out_filenames(4) = 'histhf3h'
203	phys_out_filenames(5) = 'histhf3hm'
204	phys_out_filenames(6) = 'histstn'
205	phys_out_filenames(7) = 'histmthNMC'
206	phys_out_filenames(8) = 'histdayNMC'
207	phys_out_filenames(9) = 'histhfNMC'
208	phys_out_filenames(10)= 'histstrataer'
209
210	type_ecri(1) = 'ave(X)'
211	type_ecri(2) = 'ave(X)'
212	type_ecri(3) = 'inst(X)'
213	type_ecri(4) = 'inst(X)'
214	type_ecri(5) = 'ave(X)'
215	type_ecri(6) = 'inst(X)'
216	type_ecri(7) = 'inst(X)'
217	type_ecri(8) = 'inst(X)'
218	type_ecri(9) = 'inst(X)'
219	type_ecri(10)= 'ave(X)'
220
221	clef_files(1) = ok_mensuel
222	clef_files(2) = ok_journe
223	clef_files(3) = ok_hf
224	clef_files(4) = ok_instan
225	clef_files(5) = ok_LES
226	clef_files(6) = ok_instan
227	clef_files(7) = ok_histNMC(1)
228	clef_files(8) = ok_histNMC(2)
229	clef_files(9) = ok_histNMC(3)
230	#ifdef CPP_StratAer
231	clef_files(10)= .TRUE.
232	#else
233	clef_files(10)= .FALSE.
234	#endif
235
236	!sortir des fichiers "stations" si clef_stations(:)=.TRUE.
237	clef_stations(1) = .FALSE.
238	clef_stations(2) = .FALSE.
239	clef_stations(3) = .FALSE.
240	clef_stations(4) = .FALSE.
241	clef_stations(5) = .FALSE.
242	clef_stations(6) = .FALSE.
243	clef_stations(7) = .FALSE.
244	clef_stations(8) = .FALSE.
245	clef_stations(9) = .FALSE.
246	clef_stations(10)= .FALSE.
247
248	lev_files(1) = lev_histmth
249	lev_files(2) = lev_histday
250	lev_files(3) = lev_histhf
251	lev_files(4) = lev_histins
252	lev_files(5) = lev_histLES
253	lev_files(6) = lev_histins
254	lev_files(7) = levout_histNMC(1)
255	lev_files(8) = levout_histNMC(2)
256	lev_files(9) = levout_histNMC(3)
257	lev_files(10)= 5
258
259	ecrit_files(1) = ecrit_mth
260	ecrit_files(2) = ecrit_day
261	ecrit_files(3) = ecrit_hf
262	ecrit_files(4) = ecrit_ins
263	ecrit_files(5) = ecrit_LES
264	ecrit_files(6) = ecrit_ins
265	ecrit_files(7) = freq_outNMC(1)
266	ecrit_files(8) = freq_outNMC(2)
267	ecrit_files(9) = freq_outNMC(3)
268	ecrit_files(10)= ecrit_mth
269
270	!! Lectures des parametres de sorties dans physiq.def
271
272	CALL getin('phys_out_regfkey',phys_out_regfkey)
273	CALL getin('phys_out_lonmin',phys_out_lonmin)
274	CALL getin('phys_out_lonmax',phys_out_lonmax)
275	CALL getin('phys_out_latmin',phys_out_latmin)
276	CALL getin('phys_out_latmax',phys_out_latmax)
277	phys_out_levmin(:)=levmin(:)
278	CALL getin('phys_out_levmin',levmin)
279	phys_out_levmax(:)=levmax(:)
280	CALL getin('phys_out_levmax',levmax)
281	CALL getin('phys_out_filenames',phys_out_filenames)
282	phys_out_filekeys(:)=clef_files(:)
283	CALL getin('phys_out_filekeys',clef_files)
284	phys_out_filestations(:)=clef_stations(:)
285	CALL getin('phys_out_filestations',clef_stations)
286	phys_out_filelevels(:)=lev_files(:)
287	CALL getin('phys_out_filelevels',lev_files)
288	CALL getin('phys_out_filetimesteps',chtimestep)
289	phys_out_filetypes(:)=type_ecri(:)
290	CALL getin('phys_out_filetypes',type_ecri)
291
292	type_ecri_files(:)=type_ecri(:)
293
294	! if (ok_all_xml) phys_out_filelevels = 999
295
296	WRITE(lunout,*)'phys_out_lonmin=',phys_out_lonmin
297	WRITE(lunout,*)'phys_out_lonmax=',phys_out_lonmax
298	WRITE(lunout,*)'phys_out_latmin=',phys_out_latmin
299	WRITE(lunout,*)'phys_out_latmax=',phys_out_latmax
300	WRITE(lunout,*)'phys_out_filenames=',phys_out_filenames
301	WRITE(lunout,*)'phys_out_filetypes=',type_ecri
302	WRITE(lunout,*)'phys_out_filekeys=',clef_files
303	WRITE(lunout,*)'phys_out_filestations=',clef_stations
304	WRITE(lunout,*)'phys_out_filelevels=',lev_files
305	WRITE(lunout,*)'phys_out_regfkey=',phys_out_regfkey
306
307	! A noter pour
308	! l heure initiale - dans les fichiers histoire hist* - on met comme
309	! heure de debut soit la vraie heure (pour le 1D) soit 0h (pour le 3D)
310	! afin d avoir une seule sortie mensuelle par mois lorsque l on tourne
311	! par annee (IM).
312	!
313	idayref = day_ref
314	IF (klon_glo==1) THEN
315	! current_time (used to compute hour) is updated at the begining of
316	! the physics; to set the correct outputs "initial time" we thus
317	! have to use (hour-dtphys).
318	CALL ymds2ju(annee_ref, 1, idayref, hour-pdtphys, zjulian)
319	print *,'phys_output_mod: annee,iday,hour,zjulian=',annee_ref,idayref, hour, zjulian
320	ELSE
321	CALL ymds2ju(annee_ref, 1, idayref, 0.0, zjulian)
322	CALL ymds2ju(annee_ref, 1, day_ini, start_time*rday, zjulian_start)
323	ENDIF
324
325	IF (using_xios) THEN
326	! ug R\'eglage du calendrier xios
327	!Temps julian => an, mois, jour, heure
328	CALL ju2ymds(zjulian, x_an, x_mois, x_jour, x_heure)
329	CALL ju2ymds(zjulian_start, ini_an, ini_mois, ini_jour, ini_heure)
330	CALL wxios_set_cal(dtime, calend, x_an, x_mois, x_jour, x_heure, ini_an, &
331	ini_mois, ini_jour, ini_heure )
332	ENDIF
333
334	!!!!!!!!!!!!!!!!!!!!!!! Boucle sur les fichiers !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
335	! Appel de histbeg et histvert pour creer le fichier et les niveaux verticaux !!
336	! Appel des histbeg pour definir les variables (nom, moy ou inst, freq de sortie ..
337	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
338
339	zdtime_moy = dtime ! Frequence ou l on moyenne
340
341
342	ecrit_files(7) = ecrit_files(1)
343	ecrit_files(8) = ecrit_files(2)
344	ecrit_files(9) = ecrit_files(3)
345
346	DO iff=1,nfiles
347
348	! Calculate ecrit_files for all files
349	IF ( chtimestep(iff).eq.'Default' ) THEN
350	! Par defaut ecrit_files = (ecrit_mensuel ecrit_jour ecrit_hf
351	! ...)*86400.
352	ecrit_files(iff)=ecrit_files(iff)*86400.
353	ELSE IF (chtimestep(iff).eq.'-1') THEN
354	PRINT*,'ecrit_files(',iff,') < 0 so IOIPSL work on different'
355	PRINT*,'months length'
356	ecrit_files(iff)=-1.
357	ELSE
358	CALL convers_timesteps(chtimestep(iff),dtime,ecrit_files(iff))
359	ENDIF
360
361	WRITE(lunout,*)'ecrit_files(',iff,')= ',ecrit_files(iff)
362	zoutm(iff) = ecrit_files(iff) ! Frequence ou l on ecrit en seconde
363
364
365	IF (using_xios) THEN
366	!!! Ouverture de chaque fichier XIOS !!!!!!!!!!!
367	IF (.not. ok_all_xml) THEN
368	IF (prt_level >= 10) THEN
369	print*,'phys_output_open: call wxios_add_file with phys_out_filenames(iff)=',trim(phys_out_filenames(iff))
370	ENDIF
371	CALL wxios_add_file(phys_out_filenames(iff),chtimestep(iff),lev_files(iff))
372	ENDIF
373
374	!!! Declaration des axes verticaux de chaque fichier:
375	IF (prt_level >= 10) THEN
376	print*,'phys_output_open: Declare vertical axes for each file'
377	ENDIF
378
379	IF (iff.LE.6.OR.iff.EQ.10) THEN
380	CALL wxios_add_vaxis("presnivs", &
381	levmax(iff) - levmin(iff) + 1, presnivs(levmin(iff):levmax(iff)))
382	CALL wxios_add_vaxis("presinter", &
383	klev + 1, presinter(1:klev+1))
384	CALL wxios_add_vaxis("Ahyb", &
385	levmax(iff) - levmin(iff) + 1, aps(levmin(iff):levmax(iff)), positif='down', &
386	bnds=Ahyb_bounds(levmin(iff):levmax(iff),:))
387	CALL wxios_add_vaxis("Bhyb", &
388	levmax(iff) - levmin(iff) + 1, bps(levmin(iff):levmax(iff)), positif='down', &
389	bnds=Bhyb_bounds(levmin(iff):levmax(iff),:))
390	CALL wxios_add_vaxis("klev", levmax(iff) - levmin(iff) + 1, &
391	lev_index(levmin(iff):levmax(iff)))
392	CALL wxios_add_vaxis("klevp1", klev+1, &
393	lev_index(1:klev+1))
394	CALL wxios_add_vaxis("bnds", 2, (/1.,2./))
395
396	CALL wxios_add_vaxis("Alt", &
397	levmax(iff) - levmin(iff) + 1, pseudoalt)
398
399	! wl1_sun/wl2_sun: minimum/maximum bound of wavelength (in um)
400	SELECT CASE(NSW)
401	CASE(6)
402	wl1_sun(1:6) = [0.180, 0.250, 0.440, 0.690, 1.190, 2.380]
403	wl2_sun(1:6) = [0.250, 0.440, 0.690, 1.190, 2.380, 4.000]
404	CASE(2)
405	wl1_sun(1:2) = [0.250, 0.690]
406	wl2_sun(1:2) = [0.690, 4.000]
407	END SELECT
408
409	DO ISW=1, NSW
410	wn1_sun(ISW)=1.e+6/wl1_sun(ISW)
411	wn2_sun(ISW)=1.e+6/wl2_sun(ISW)
412	spbnds_sun(ISW,1)=wn2_sun(ISW)
413	spbnds_sun(ISW,2)=wn1_sun(ISW)
414	spectband(ISW)=(wn1_sun(ISW)+wn2_sun(ISW))/2
415	ENDDO
416	!
417	!!! ajout axe vertical spectband : solar band number
418	CALL wxios_add_vaxis("spectband", NSW, spectband, positif='down')
419	ELSE
420	! NMC files
421	CALL wxios_add_vaxis("plev", &
422	levmax(iff) - levmin(iff) + 1, rlevSTD(levmin(iff):levmax(iff)))
423	ENDIF
424	ENDIF !using_xios
425
426	IF (clef_files(iff)) THEN
427	!!!!!!!!!!!!!!!!! Traitement dans le cas ou l'on veut stocker sur un domaine limite !!
428	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
429	IF (phys_out_regfkey(iff)) THEN
430	imin_ins=1
431	imax_ins=nbp_lon
432	jmin_ins=1
433	jmax_ins=jjmp1
434
435	! correction abderr
436	DO i=1,nbp_lon
437	WRITE(lunout,*)'io_lon(i)=',io_lon(i)
438	IF (io_lon(i).le.phys_out_lonmin(iff)) imin_ins=i
439	IF (io_lon(i).le.phys_out_lonmax(iff)) imax_ins=i+1
440	ENDDO
441
442	DO j=1,jjmp1
443	WRITE(lunout,*)'io_lat(j)=',io_lat(j)
444	IF (io_lat(j).ge.phys_out_latmin(iff)) jmax_ins=j+1
445	IF (io_lat(j).ge.phys_out_latmax(iff)) jmin_ins=j
446	ENDDO
447
448	WRITE(lunout,*)'On stoke le fichier histoire numero ',iff,' sur ', &
449	imin_ins,imax_ins,jmin_ins,jmax_ins
450	WRITE(lunout,*)'longitudes : ', &
451	io_lon(imin_ins),io_lon(imax_ins), &
452	'latitudes : ', &
453	io_lat(jmax_ins),io_lat(jmin_ins)
454
455	CALL histbeg(phys_out_filenames(iff),nbp_lon,io_lon,jjmp1,io_lat, &
456	imin_ins,imax_ins-imin_ins+1, &
457	jmin_ins,jmax_ins-jmin_ins+1, &
458	itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff))
459	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
460	!IM fichiers stations
461	ELSE IF (clef_stations(iff)) THEN
462
463	IF (prt_level >= 10) THEN
464	WRITE(lunout,*)'phys_output_open: iff=',iff,' phys_out_filenames(iff)=',phys_out_filenames(iff)
465	ENDIF
466
467	CALL histbeg_phy_all(rlon,rlat,pim,tabij,ipt,jpt,plon,plat,plon_bounds,plat_bounds, &
468	phys_out_filenames(iff), &
469	itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff))
470	ELSE
471
472	IF (prt_level >= 10) THEN
473	WRITE(lunout,*)'phys_output_open: iff=',iff,' phys_out_filenames(iff)=',phys_out_filenames(iff)
474	ENDIF
475
476	CALL histbeg_phy_all(phys_out_filenames(iff),itau_phy,zjulian,&
477	dtime,nhorim(iff),nid_files(iff))
478	ENDIF
479
480	#ifndef CPP_IOIPSL_NO_OUTPUT
481	IF (iff.LE.6.OR.iff.EQ.10) THEN
482	CALL histvert(nid_files(iff), "presnivs", "Vertical levels", "Pa", &
483	levmax(iff) - levmin(iff) + 1, &
484	presnivs(levmin(iff):levmax(iff)), nvertm(iff),"down")
485	!!!! Composantes de la coordonnee sigma-hybride
486	CALL histvert(nid_files(iff), "Ahyb","Ahyb comp of Hyb Cord ", "Pa", &
487	levmax(iff) - levmin(iff) + 1,aps,nvertap(iff))
488
489	CALL histvert(nid_files(iff), "Bhyb","Bhyb comp of Hyb Cord", " ", &
490	levmax(iff) - levmin(iff) + 1,bps,nvertbp(iff))
491
492	CALL histvert(nid_files(iff), "Alt","Height approx for scale heigh of 8km at levels", "Km", &
493	levmax(iff) - levmin(iff) + 1,pseudoalt,nvertAlt(iff))
494
495	ELSE
496	! NMC files
497	CALL histvert(nid_files(iff), "plev", "pressure", "Pa", &
498	levmax(iff) - levmin(iff) + 1, &
499	rlevSTD(levmin(iff):levmax(iff)), nvertm(iff), "down")
500	ENDIF
501	#endif
502
503	ENDIF ! clef_files
504
505	itr = 0
506	DO iq = 1, nqtot
507	IF(.NOT.(tracers(iq)%isAdvected .AND. tracers(iq)%isInPhysics)) CYCLE
508	itr = itr + 1
509	dn = 'd'//TRIM(tracers(iq)%name)//'_'
510
511	flag = [1, 5, 5, 5, 10, 10, 11, 11, 11, 11]
512	lnam = 'Tracer '//TRIM(tracers(iq)%longName)
513	tnam = TRIM(tracers(iq)%name); o_trac (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
514
515	flag = [4, 7, 7, 7, 10, 10, 11, 11, 11, 11]
516	lnam = 'Tendance tracer '//TRIM(tracers(iq)%longName)
517	tnam = TRIM(dn)//'vdf'; o_dtr_vdf (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
518
519	flag = [5, 7, 7, 7, 10, 10, 11, 11, 11, 11]
520	tnam = TRIM(dn)//'the'; o_dtr_the (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
521	tnam = TRIM(dn)//'con'; o_dtr_con (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
522
523	flag = [7, 7, 7, 7, 10, 10, 11, 11, 11, 11]
524	tnam = TRIM(dn)//'lessi_impa'; o_dtr_lessi_impa(itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
525	tnam = TRIM(dn)//'lessi_nucl'; o_dtr_lessi_nucl(itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
526	tnam = TRIM(dn)//'insc'; o_dtr_insc (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
527	tnam = TRIM(dn)//'bcscav'; o_dtr_bcscav (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
528	tnam = TRIM(dn)//'evapls'; o_dtr_evapls (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
529	tnam = TRIM(dn)//'ls'; o_dtr_ls (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
530	tnam = TRIM(dn)//'trsp'; o_dtr_trsp (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
531	tnam = TRIM(dn)//'sscav'; o_dtr_sscav (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
532	tnam = TRIM(dn)//'sat'; o_dtr_sat (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
533	tnam = TRIM(dn)//'uscav'; o_dtr_uscav (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
534
535	lnam = 'tracer tendency dry deposition'//TRIM(tracers(iq)%longName)
536	tnam = 'cum'//TRIM(dn)//'dry'; o_dtr_dry (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
537
538	flag = [1, 4, 10, 10, 10, 10, 11, 11, 11, 11]
539	lnam = 'Cumulated tracer '//TRIM(tracers(iq)%longName)
540	tnam = 'cum'//TRIM(tracers(iq)%name); o_trac_cum(itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
541	ENDDO
542
543	ENDDO ! iff
544
545	#ifdef ISO
546	write(,) 'phys_output_mid 589'
547	do ixt=1,ntraciso
548	outiso = TRIM(isoName(ixt))
549	i = INDEX(outiso, '_', .TRUE.)
550	outiso = outiso(1:i-1)//outiso(i+1:LEN_TRIM(outiso))
551
552	flag = [1, 1, 1, 10, 5, 10, 11, 11, 11, 11]; unit = 'kg/(s*m2)'
553	o_xtprecip(ixt)=ctrl_out(flag, 'precip'//TRIM(outiso), 'Precip Totale liq+sol', unit, [('',i=1,nfiles)])
554	o_xtpluc (ixt)=ctrl_out(flag, 'pluc'//TRIM(outiso), 'Convective Precip.', unit, [('',i=1,nfiles)])
555
556	flag = [1, 1, 1, 10, 10, 10, 11, 11, 11, 11]
557	o_xtplul (ixt)=ctrl_out(flag, 'plul'//TRIM(outiso), 'Large-scale Precip.', unit, [('',i=1,nfiles)])
558	o_xtevap (ixt)=ctrl_out(flag, 'evap'//TRIM(outiso), 'Evaporat.', unit, [('',i=1,nfiles)])
559
560	! ajout Camille 8 mai 2023
561	flag = [1, 6, 10, 10, 10, 10, 11, 11, 11, 11]
562	o_xtevap_srf (ixt,1)=ctrl_out(flag, 'evap_ter'//TRIM(outiso), 'Evap sfc'//clnsurf(1), unit, [('',i=1,nfiles)])
563	o_xtevap_srf (ixt,2)=ctrl_out(flag, 'evap_lic'//TRIM(outiso), 'Evap sfc'//clnsurf(2), unit, [('',i=1,nfiles)])
564	o_xtevap_srf (ixt,3)=ctrl_out(flag, 'evap_oce'//TRIM(outiso), 'Evap sfc'//clnsurf(3), unit, [('',i=1,nfiles)])
565	o_xtevap_srf (ixt,4)=ctrl_out(flag, 'evap_sic'//TRIM(outiso), 'Evap sfc'//clnsurf(4), unit, [('',i=1,nfiles)])
566
567	flag = [2, 3, 4, 10, 10, 10, 11, 11, 11, 11]; unit = 'kg/kg'
568	o_xtovap (ixt)=ctrl_out(flag, 'ovap'//TRIM(outiso), 'Specific humidity', unit, [('',i=1,nfiles)])
569	o_xtoliq (ixt)=ctrl_out(flag, 'oliq'//TRIM(outiso), 'Liquid water', unit, [('',i=1,nfiles)])
570	o_xtcond (ixt)=ctrl_out(flag, 'ocond'//TRIM(outiso), 'Condensed water', unit, [('',i=1,nfiles)])
571
572	flag = [1, 1, 1, 10, 5, 10, 11, 11, 11, 11]; unit = 'kg/m2/s'
573	o_xtrunoff_diag (ixt)=ctrl_out(flag, 'runoffland'//TRIM(outiso), 'Run-off rate land for bucket', unit, [('',i=1,nfiles)])
574
575	flag = [4, 10, 10, 10, 10, 10, 11, 11, 11, 11]; unit = '(kg/kg)/s'
576	o_dxtdyn (ixt)=ctrl_out(flag, 'dqdyn'//TRIM(outiso), 'Dynamics dQ', unit, [('',i=1,nfiles)])
577	o_dxtldyn (ixt)=ctrl_out(flag, 'dqldyn'//TRIM(outiso), 'Dynamics dQL', unit, [('',i=1,nfiles)])
578	o_dxtcon (ixt)=ctrl_out(flag, 'dqcon'//TRIM(outiso), 'Convection dQ', unit, [('',i=1,nfiles)])
579	o_dxteva (ixt)=ctrl_out(flag, 'dqeva'//TRIM(outiso), 'Reevaporation dQ', unit, [('',i=1,nfiles)])
580	o_dxtlsc (ixt)=ctrl_out(flag, 'dqlsc'//TRIM(outiso), 'Condensation dQ', unit, [('',i=1,nfiles)])
581	o_dxtajs (ixt)=ctrl_out(flag, 'dqajs'//TRIM(outiso), 'Dry adjust. dQ', unit, [('',i=1,nfiles)])
582	o_dxtvdf (ixt)=ctrl_out(flag, 'dqvdf'//TRIM(outiso), 'Boundary-layer dQ', unit, [('',i=1,nfiles)])
583	o_dxtthe (ixt)=ctrl_out(flag, 'dqthe'//TRIM(outiso), 'Thermal dQ', unit, [('',i=1,nfiles)])
584
585	IF(ok_qch4) o_dxtch4(ixt)=ctrl_out(flag, 'dqch4'//TRIM(outiso), 'H2O due to CH4 oxidation & photolysis', &
586	unit, [('',i=1,nfiles)])
587	IF(ixt == iso_HTO) THEN
588	o_dxtprod_nucl(ixt)=ctrl_out(flag, 'dqprodnucl'//TRIM(outiso), 'dHTO/dt due to nuclear production', &
589	unit, [('',i=1,nfiles)])
590	o_dxtcosmo (ixt)=ctrl_out(flag, 'dqcosmo'//TRIM(outiso), 'dHTO/dt due to cosmogenic production', &
591	unit, [('',i=1,nfiles)])
592	o_dxtdecroiss (ixt)=ctrl_out(flag, 'dqdecroiss'//TRIM(outiso), 'dHTO/dt due to radiative destruction', &
593	unit, [('',i=1,nfiles)])
594	END IF
595	enddo !do ixt=1,niso
596	write(,) 'phys_output_mid 596'
597	#endif
598
599
600	! Updated write frequencies due to phys_out_filetimesteps.
601	! Write frequencies are now in seconds.
602	ecrit_mth = ecrit_files(1)
603	ecrit_day = ecrit_files(2)
604	ecrit_hf = ecrit_files(3)
605	ecrit_ins = ecrit_files(4)
606	ecrit_LES = ecrit_files(5)
607	ecrit_ins = ecrit_files(6)
608
609	IF (prt_level >= 10) THEN
610	WRITE(lunout,*)'swaerofree_diag=',swaerofree_diag
611	WRITE(lunout,*)'swaero_diag=',swaero_diag
612	WRITE(lunout,*)'dryaod_diag=',dryaod_diag
613	WRITE(lunout,*)'ok_4xCO2atm=',ok_4xCO2atm
614	WRITE(lunout,*)'phys_output_open: ends here'
615	ENDIF
616
617	END SUBROUTINE phys_output_open
618
619	SUBROUTINE convers_timesteps(str,dtime,timestep)
620
621	use ioipsl
622	USE phys_cal_mod
623	USE time_phylmdz_mod, ONLY: day_ref, annee_ref
624	USE print_control_mod, ONLY: lunout
625
626	IMPLICIT NONE
627
628	CHARACTER(LEN=20) :: str
629	CHARACTER(LEN=10) :: type
630	INTEGER :: ipos,il
631	real :: ttt,xxx,timestep,dayseconde,dtime
632	parameter (dayseconde=86400.)
633
634	ipos=scan(str,'0123456789.',.TRUE.)
635	!
636	il=len_trim(str)
637	WRITE(lunout,*) "ipos = ", ipos
638	WRITE(lunout,*) "il = ", il
639	IF (ipos == 0) CALL abort_physic("convers_timesteps", "bad str", 1)
640	read(str(1:ipos),*) ttt
641	WRITE(lunout,*)ttt
642	type=str(ipos+1:il)
643
644	IF ( il == ipos ) THEN
645	type='day'
646	ENDIF
647
648	IF ( type == 'day'.or.type == 'days'.or.type == 'jours'.or.type == 'jour' ) timestep = ttt * dayseconde
649	IF ( type == 'mounths'.or.type == 'mth'.or.type == 'mois' ) THEN
650	WRITE(lunout,*)'annee_ref,day_ref mon_len',annee_ref,day_ref,mth_len
651	timestep = ttt * dayseconde * mth_len
652	ENDIF
653	IF ( type == 'hours'.or.type == 'hr'.or.type == 'heurs') timestep = ttt * dayseconde / 24.
654	IF ( type == 'mn'.or.type == 'minutes' ) timestep = ttt * 60.
655	IF ( type == 's'.or.type == 'sec'.or.type == 'secondes' ) timestep = ttt
656	IF ( type == 'TS' ) timestep = ttt * dtime
657
658	WRITE(lunout,*)'type = ',type
659	WRITE(lunout,*)'nb j/h/m = ',ttt
660	WRITE(lunout,*)'timestep(s)=',timestep
661
662	END SUBROUTINE convers_timesteps
663
664	END MODULE phys_output_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format