Context Navigation

phys_output_mod.F90 @ 4797

Last change on this file since 4797 was 4619, checked in by yann meurdesoif, 18 months ago

Suppress usage of preprocessing key CPP_XIOS.
Wrapper file is used to suppress XIOS symbol when xios is not linked and not used (-io ioipsl)
The CPP_XIOS key is replaced in model by "using_xios" boolean variable to switch between IOIPSL or XIOS output.

File size: 28.5 KB

Line
1	! $Id: phys_output_mod.F90 3792 2021-01-04 17:01:25Z evignon $
2	!
3
4	MODULE phys_output_mod
5	USE indice_sol_mod
6	USE phys_output_var_mod
7	USE phys_output_write_mod, ONLY : phys_output_write
8	REAL, DIMENSION(nfiles),SAVE :: ecrit_files
9
10	! Abderrahmane 12 2007
11	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
12	!!! Ecreture des Sorties du modele dans les fichiers Netcdf :
13	! histmth.nc : moyennes mensuelles
14	! histday.nc : moyennes journalieres
15	! histhf.nc : moyennes toutes les 3 heures
16	! histins.nc : valeurs instantanees
17	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
18
19	CONTAINS
20
21	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
22	!!!!!!!!! Ouverture des fichier et definition des variable de sortie !!!!!!!!
23	!! histbeg, histvert et histdef
24	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
25
26	SUBROUTINE phys_output_open(rlon,rlat,pim,tabij,ipt,jpt,plon,plat, &
27	jjmp1,nlevSTD,clevSTD,rlevSTD, dtime, ok_veget, &
28	type_ocean, iflag_pbl,iflag_pbl_split,ok_mensuel,ok_journe, &
29	ok_hf,ok_instan,ok_LES,ok_ade,ok_aie, read_climoz, &
30	phys_out_filestations, &
31	aerosol_couple, flag_aerosol_strat, &
32	pdtphys, paprs, pphis, pplay, lmax_th, ptconv, ptconvth, ivap, &
33	d_u, d_t, qx, d_qx, zmasse, ok_sync)
34
35	USE iophy
36	USE dimphy
37	USE infotrac_phy, ONLY: nqtot, tracers, niso, ntraciso=>ntiso
38	USE strings_mod, ONLY: maxlen
39	USE ioipsl
40	USE phys_cal_mod, only : hour, calend
41	USE mod_phys_lmdz_para
42	!Martin
43	USE surface_data, ONLY : landice_opt
44	USE phys_output_ctrlout_mod
45	USE mod_grid_phy_lmdz, only: klon_glo,nbp_lon,nbp_lat
46	USE print_control_mod, ONLY: prt_level,lunout
47	USE vertical_layers_mod, ONLY: ap,bp,preff,presnivs, aps, bps, pseudoalt
48	USE time_phylmdz_mod, ONLY: day_ini, itau_phy, start_time, annee_ref, day_ref
49	! ug Pour les sorties XIOS
50	USE wxios
51	#ifdef ISO
52	USE isotopes_mod, ONLY: isoName,iso_HTO
53	#ifdef ISOTRAC
54	use isotrac_mod, only: index_zone,index_iso,strtrac
55	#endif
56	#endif
57
58	IMPLICIT NONE
59	include "clesphys.h"
60	include "alpale.h"
61	include "YOMCST.h"
62
63	! ug Nouveaux arguments n\'ecessaires au histwrite_mod:
64	INTEGER, INTENT(IN) :: ivap
65	INTEGER, DIMENSION(klon), INTENT(IN) :: lmax_th
66	LOGICAL, INTENT(IN) :: ok_sync
67	LOGICAL, DIMENSION(klon, klev), INTENT(IN) :: ptconv, ptconvth
68	REAL, INTENT(IN) :: pdtphys
69	REAL, DIMENSION(klon), INTENT(IN) :: pphis
70	REAL, DIMENSION(klon, klev), INTENT(IN) :: pplay, d_u, d_t
71	REAL, DIMENSION(klon, klev+1), INTENT(IN) :: paprs
72	REAL, DIMENSION(klon,klev,nqtot), INTENT(IN):: qx, d_qx
73	REAL, DIMENSION(klon, klev), INTENT(IN) :: zmasse
74
75
76	REAL,DIMENSION(klon),INTENT(IN) :: rlon
77	REAL,DIMENSION(klon),INTENT(IN) :: rlat
78	INTEGER, INTENT(IN) :: pim
79	INTEGER, DIMENSION(pim) :: tabij
80	INTEGER,DIMENSION(pim), INTENT(IN) :: ipt, jpt
81	REAL,DIMENSION(pim), INTENT(IN) :: plat, plon
82	REAL,DIMENSION(pim,2) :: plat_bounds, plon_bounds
83
84	INTEGER :: jjmp1
85	INTEGER :: nlevSTD, radpas
86	LOGICAL :: ok_mensuel, ok_journe, ok_hf, ok_instan
87	LOGICAL :: ok_LES,ok_ade,ok_aie
88	INTEGER :: flag_aerosol_strat
89	LOGICAL :: aerosol_couple
90	INTEGER, INTENT(IN):: read_climoz ! read ozone climatology
91	! Allowed values are 0, 1 and 2
92	! 0: do not read an ozone climatology
93	! 1: read a single ozone climatology that will be used day and night
94	! 2: read two ozone climatologies, the average day and night
95	! climatology and the daylight climatology
96
97	REAL :: dtime
98	INTEGER :: idayref
99	REAL :: zjulian_start, zjulian
100	CHARACTER(LEN=4), DIMENSION(nlevSTD) :: clevSTD
101	REAL, DIMENSION(nlevSTD) :: rlevSTD
102	INTEGER :: nsrf, k, iq, iff, i, j, ilev, itr, ixt, iiso, izone
103	INTEGER :: naero
104	LOGICAL :: ok_veget
105	INTEGER :: iflag_pbl
106	INTEGER :: iflag_pbl_split
107	CHARACTER(LEN=4) :: bb2
108	CHARACTER(LEN=2) :: bb3
109	CHARACTER(LEN=6) :: type_ocean
110	INTEGER, DIMENSION(nbp_lon*jjmp1) :: ndex2d
111	INTEGER, DIMENSION(nbp_lonjjmp1klev) :: ndex3d
112	INTEGER :: imin_ins, imax_ins
113	INTEGER :: jmin_ins, jmax_ins
114	INTEGER, DIMENSION(nfiles) :: phys_out_levmin, phys_out_levmax
115	INTEGER, DIMENSION(nfiles) :: phys_out_filelevels
116	CHARACTER(LEN=20), DIMENSION(nfiles) :: chtimestep = (/ 'Default', 'Default', 'Default', 'Default', 'Default', &
117	'Default', 'Default', 'Default', 'Default', 'Default' /)
118	LOGICAL, DIMENSION(nfiles) :: phys_out_filekeys
119	LOGICAL, DIMENSION(nfiles) :: phys_out_filestations
120
121	#ifdef ISO
122	CHARACTER(LEN=maxlen) :: outiso
123	CHARACTER(LEN=20) :: unit
124	#endif
125	CHARACTER(LEN=maxlen) :: tnam, lnam, dn
126	INTEGER :: flag(nfiles)
127
128	!!!!!!!!!! stockage dans une region limitee pour chaque fichier !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
129	! entre [phys_out_lonmin,phys_out_lonmax] et [phys_out_latmin,phys_out_latmax]
130	LOGICAL, DIMENSION(nfiles), SAVE :: &
131	phys_out_regfkey = [.FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE.]
132	REAL, DIMENSION(nfiles), SAVE :: &
133	phys_out_lonmin = [ -180., -180., -180., -180., -180., -180., -180., -180., -180., -180.], &
134	phys_out_lonmax = [ 180., 180., 180., 180., 180., 180., 180., 180., 180., 180.], &
135	phys_out_latmin = [ -90., -90., -90., -90., -90., -90., -90., -90., -90., -90.], &
136	phys_out_latmax = [ 90., 90., 90., 90., 90., 90., 90., 90., 90., 90.]
137	REAL, DIMENSION(klev,2) :: Ahyb_bounds, Bhyb_bounds
138	REAL, DIMENSION(klev+1) :: lev_index
139
140	! ug Variables utilis\'ees pour r\'ecup\'erer le calendrier pour xios
141	INTEGER :: x_an, x_mois, x_jour
142	REAL :: x_heure
143	INTEGER :: ini_an, ini_mois, ini_jour
144	REAL :: ini_heure
145	INTEGER :: ISW
146	REAL, DIMENSION(NSW) :: wl1_sun, wl2_sun !wavelength bounds (in um) for SW
147	REAL, DIMENSION(NSW) :: wn1_sun, wn2_sun !wavenumber bounds (in m-1) for SW
148	REAL, DIMENSION(NSW) :: spectband !mean wavenumb. of each sp.band
149	REAL, DIMENSION(NSW,2) :: spbnds_sun !bounds of spectband
150
151	WRITE(lunout,*) 'Debut phys_output_mod.F90'
152	! Initialisations (Valeurs par defaut
153
154	DO ilev=1,klev
155	Ahyb_bounds(ilev,1) = ap(ilev)
156	Ahyb_bounds(ilev,2) = ap(ilev+1)
157	Bhyb_bounds(ilev,1) = bp(ilev)
158	Bhyb_bounds(ilev,2) = bp(ilev+1)
159	lev_index(ilev) = REAL(ilev)
160	END DO
161	lev_index(klev+1) = REAL(klev+1)
162
163	IF (.NOT. ALLOCATED(o_trac)) ALLOCATE(o_trac(nqtot))
164	IF (.NOT. ALLOCATED(o_trac_cum)) ALLOCATE(o_trac_cum(nqtot))
165	ALLOCATE(o_dtr_the(nqtot),o_dtr_con(nqtot),o_dtr_lessi_impa(nqtot))
166	ALLOCATE(o_dtr_lessi_nucl(nqtot),o_dtr_insc(nqtot),o_dtr_bcscav(nqtot))
167	ALLOCATE(o_dtr_evapls(nqtot),o_dtr_ls(nqtot),o_dtr_trsp(nqtot))
168	ALLOCATE(o_dtr_sscav(nqtot),o_dtr_sat(nqtot),o_dtr_uscav(nqtot))
169	ALLOCATE(o_dtr_dry(nqtot),o_dtr_vdf(nqtot))
170
171	#ifdef ISO
172	ALLOCATE(o_xtprecip(ntraciso))
173	ALLOCATE(o_xtplul(ntraciso))
174	ALLOCATE(o_xtpluc(ntraciso))
175	ALLOCATE(o_xtevap(ntraciso))
176	ALLOCATE(o_xtevap_srf(ntraciso,4))
177	ALLOCATE(o_xtovap(ntraciso))
178	ALLOCATE(o_xtoliq(ntraciso))
179	ALLOCATE(o_xtcond(ntraciso))
180	ALLOCATE(o_dxtdyn(ntraciso))
181	ALLOCATE(o_dxtldyn(ntraciso))
182	ALLOCATE(o_dxtcon(ntraciso))
183	ALLOCATE(o_dxtlsc(ntraciso))
184	ALLOCATE(o_dxteva(ntraciso))
185	ALLOCATE(o_dxtajs(ntraciso))
186	ALLOCATE(o_dxtvdf(ntraciso))
187	ALLOCATE(o_dxtthe(ntraciso))
188	ALLOCATE(o_dxtch4(ntraciso))
189	if (iso_HTO.gt.0) then
190	ALLOCATE(o_dxtprod_nucl(ntraciso))
191	ALLOCATE(o_dxtcosmo(ntraciso))
192	ALLOCATE(o_dxtdecroiss(ntraciso))
193	endif
194	#endif
195
196	levmax = (/ klev, klev, klev, klev, klev, klev, nlevSTD, nlevSTD, nlevSTD, klev /)
197
198	phys_out_filenames(1) = 'histmth'
199	phys_out_filenames(2) = 'histday'
200	phys_out_filenames(3) = 'histhf6h'
201	phys_out_filenames(4) = 'histhf3h'
202	phys_out_filenames(5) = 'histhf3hm'
203	phys_out_filenames(6) = 'histstn'
204	phys_out_filenames(7) = 'histmthNMC'
205	phys_out_filenames(8) = 'histdayNMC'
206	phys_out_filenames(9) = 'histhfNMC'
207	phys_out_filenames(10)= 'histstrataer'
208
209	type_ecri(1) = 'ave(X)'
210	type_ecri(2) = 'ave(X)'
211	type_ecri(3) = 'inst(X)'
212	type_ecri(4) = 'inst(X)'
213	type_ecri(5) = 'ave(X)'
214	type_ecri(6) = 'inst(X)'
215	type_ecri(7) = 'inst(X)'
216	type_ecri(8) = 'inst(X)'
217	type_ecri(9) = 'inst(X)'
218	type_ecri(10)= 'ave(X)'
219
220	clef_files(1) = ok_mensuel
221	clef_files(2) = ok_journe
222	clef_files(3) = ok_hf
223	clef_files(4) = ok_instan
224	clef_files(5) = ok_LES
225	clef_files(6) = ok_instan
226	clef_files(7) = ok_histNMC(1)
227	clef_files(8) = ok_histNMC(2)
228	clef_files(9) = ok_histNMC(3)
229	#ifdef CPP_StratAer
230	clef_files(10)= .TRUE.
231	#else
232	clef_files(10)= .FALSE.
233	#endif
234
235	!sortir des fichiers "stations" si clef_stations(:)=.TRUE.
236	clef_stations(1) = .FALSE.
237	clef_stations(2) = .FALSE.
238	clef_stations(3) = .FALSE.
239	clef_stations(4) = .FALSE.
240	clef_stations(5) = .FALSE.
241	clef_stations(6) = .FALSE.
242	clef_stations(7) = .FALSE.
243	clef_stations(8) = .FALSE.
244	clef_stations(9) = .FALSE.
245	clef_stations(10)= .FALSE.
246
247	lev_files(1) = lev_histmth
248	lev_files(2) = lev_histday
249	lev_files(3) = lev_histhf
250	lev_files(4) = lev_histins
251	lev_files(5) = lev_histLES
252	lev_files(6) = lev_histins
253	lev_files(7) = levout_histNMC(1)
254	lev_files(8) = levout_histNMC(2)
255	lev_files(9) = levout_histNMC(3)
256	lev_files(10)= 5
257
258	ecrit_files(1) = ecrit_mth
259	ecrit_files(2) = ecrit_day
260	ecrit_files(3) = ecrit_hf
261	ecrit_files(4) = ecrit_ins
262	ecrit_files(5) = ecrit_LES
263	ecrit_files(6) = ecrit_ins
264	ecrit_files(7) = freq_outNMC(1)
265	ecrit_files(8) = freq_outNMC(2)
266	ecrit_files(9) = freq_outNMC(3)
267	ecrit_files(10)= ecrit_mth
268
269	!! Lectures des parametres de sorties dans physiq.def
270
271	CALL getin('phys_out_regfkey',phys_out_regfkey)
272	CALL getin('phys_out_lonmin',phys_out_lonmin)
273	CALL getin('phys_out_lonmax',phys_out_lonmax)
274	CALL getin('phys_out_latmin',phys_out_latmin)
275	CALL getin('phys_out_latmax',phys_out_latmax)
276	phys_out_levmin(:)=levmin(:)
277	CALL getin('phys_out_levmin',levmin)
278	phys_out_levmax(:)=levmax(:)
279	CALL getin('phys_out_levmax',levmax)
280	CALL getin('phys_out_filenames',phys_out_filenames)
281	phys_out_filekeys(:)=clef_files(:)
282	CALL getin('phys_out_filekeys',clef_files)
283	phys_out_filestations(:)=clef_stations(:)
284	CALL getin('phys_out_filestations',clef_stations)
285	phys_out_filelevels(:)=lev_files(:)
286	CALL getin('phys_out_filelevels',lev_files)
287	CALL getin('phys_out_filetimesteps',chtimestep)
288	phys_out_filetypes(:)=type_ecri(:)
289	CALL getin('phys_out_filetypes',type_ecri)
290
291	type_ecri_files(:)=type_ecri(:)
292
293	! if (ok_all_xml) phys_out_filelevels = 999
294
295	WRITE(lunout,*)'phys_out_lonmin=',phys_out_lonmin
296	WRITE(lunout,*)'phys_out_lonmax=',phys_out_lonmax
297	WRITE(lunout,*)'phys_out_latmin=',phys_out_latmin
298	WRITE(lunout,*)'phys_out_latmax=',phys_out_latmax
299	WRITE(lunout,*)'phys_out_filenames=',phys_out_filenames
300	WRITE(lunout,*)'phys_out_filetypes=',type_ecri
301	WRITE(lunout,*)'phys_out_filekeys=',clef_files
302	WRITE(lunout,*)'phys_out_filestations=',clef_stations
303	WRITE(lunout,*)'phys_out_filelevels=',lev_files
304	WRITE(lunout,*)'phys_out_regfkey=',phys_out_regfkey
305
306	! A noter pour
307	! l heure initiale - dans les fichiers histoire hist* - on met comme
308	! heure de debut soit la vraie heure (pour le 1D) soit 0h (pour le 3D)
309	! afin d avoir une seule sortie mensuelle par mois lorsque l on tourne
310	! par annee (IM).
311	!
312	idayref = day_ref
313	IF (klon_glo==1) THEN
314	! current_time (used to compute hour) is updated at the begining of
315	! the physics; to set the correct outputs "initial time" we thus
316	! have to use (hour-dtphys).
317	CALL ymds2ju(annee_ref, 1, idayref, hour-pdtphys, zjulian)
318	print *,'phys_output_mod: annee,iday,hour,zjulian=',annee_ref,idayref, hour, zjulian
319	ELSE
320	CALL ymds2ju(annee_ref, 1, idayref, 0.0, zjulian)
321	CALL ymds2ju(annee_ref, 1, day_ini, start_time*rday, zjulian_start)
322	ENDIF
323
324	IF (using_xios) THEN
325	! ug R\'eglage du calendrier xios
326	!Temps julian => an, mois, jour, heure
327	CALL ju2ymds(zjulian, x_an, x_mois, x_jour, x_heure)
328	CALL ju2ymds(zjulian_start, ini_an, ini_mois, ini_jour, ini_heure)
329	CALL wxios_set_cal(dtime, calend, x_an, x_mois, x_jour, x_heure, ini_an, &
330	ini_mois, ini_jour, ini_heure )
331	ENDIF
332
333	!!!!!!!!!!!!!!!!!!!!!!! Boucle sur les fichiers !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
334	! Appel de histbeg et histvert pour creer le fichier et les niveaux verticaux !!
335	! Appel des histbeg pour definir les variables (nom, moy ou inst, freq de sortie ..
336	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
337
338	zdtime_moy = dtime ! Frequence ou l on moyenne
339
340
341	ecrit_files(7) = ecrit_files(1)
342	ecrit_files(8) = ecrit_files(2)
343	ecrit_files(9) = ecrit_files(3)
344
345	DO iff=1,nfiles
346
347	! Calculate ecrit_files for all files
348	IF ( chtimestep(iff).eq.'Default' ) THEN
349	! Par defaut ecrit_files = (ecrit_mensuel ecrit_jour ecrit_hf
350	! ...)*86400.
351	ecrit_files(iff)=ecrit_files(iff)*86400.
352	ELSE IF (chtimestep(iff).eq.'-1') THEN
353	PRINT*,'ecrit_files(',iff,') < 0 so IOIPSL work on different'
354	PRINT*,'months length'
355	ecrit_files(iff)=-1.
356	ELSE
357	CALL convers_timesteps(chtimestep(iff),dtime,ecrit_files(iff))
358	ENDIF
359
360	WRITE(lunout,*)'ecrit_files(',iff,')= ',ecrit_files(iff)
361	zoutm(iff) = ecrit_files(iff) ! Frequence ou l on ecrit en seconde
362
363
364	IF (using_xios) THEN
365	!!! Ouverture de chaque fichier XIOS !!!!!!!!!!!
366	IF (.not. ok_all_xml) THEN
367	IF (prt_level >= 10) THEN
368	print*,'phys_output_open: call wxios_add_file with phys_out_filenames(iff)=',trim(phys_out_filenames(iff))
369	ENDIF
370	CALL wxios_add_file(phys_out_filenames(iff),chtimestep(iff),lev_files(iff))
371	ENDIF
372
373	!!! Declaration des axes verticaux de chaque fichier:
374	IF (prt_level >= 10) THEN
375	print*,'phys_output_open: Declare vertical axes for each file'
376	ENDIF
377
378	IF (iff.LE.6.OR.iff.EQ.10) THEN
379	CALL wxios_add_vaxis("presnivs", &
380	levmax(iff) - levmin(iff) + 1, presnivs(levmin(iff):levmax(iff)))
381	CALL wxios_add_vaxis("Ahyb", &
382	levmax(iff) - levmin(iff) + 1, aps(levmin(iff):levmax(iff)), positif='down', &
383	bnds=Ahyb_bounds(levmin(iff):levmax(iff),:))
384	CALL wxios_add_vaxis("Bhyb", &
385	levmax(iff) - levmin(iff) + 1, bps(levmin(iff):levmax(iff)), positif='down', &
386	bnds=Bhyb_bounds(levmin(iff):levmax(iff),:))
387	CALL wxios_add_vaxis("klev", levmax(iff) - levmin(iff) + 1, &
388	lev_index(levmin(iff):levmax(iff)))
389	CALL wxios_add_vaxis("klevp1", klev+1, &
390	lev_index(1:klev+1))
391	CALL wxios_add_vaxis("bnds", 2, (/1.,2./))
392
393	CALL wxios_add_vaxis("Alt", &
394	levmax(iff) - levmin(iff) + 1, pseudoalt)
395
396	! wl1_sun/wl2_sun: minimum/maximum bound of wavelength (in um)
397	SELECT CASE(NSW)
398	CASE(6)
399	wl1_sun(1:6) = [0.180, 0.250, 0.440, 0.690, 1.190, 2.380]
400	wl2_sun(1:6) = [0.250, 0.440, 0.690, 1.190, 2.380, 4.000]
401	CASE(2)
402	wl1_sun(1:2) = [0.250, 0.690]
403	wl2_sun(1:2) = [0.690, 4.000]
404	END SELECT
405
406	DO ISW=1, NSW
407	wn1_sun(ISW)=1.e+6/wl1_sun(ISW)
408	wn2_sun(ISW)=1.e+6/wl2_sun(ISW)
409	spbnds_sun(ISW,1)=wn2_sun(ISW)
410	spbnds_sun(ISW,2)=wn1_sun(ISW)
411	spectband(ISW)=(wn1_sun(ISW)+wn2_sun(ISW))/2
412	ENDDO
413	!
414	!!! ajout axe vertical spectband : solar band number
415	CALL wxios_add_vaxis("spectband", NSW, spectband, positif='down')
416	ELSE
417	! NMC files
418	CALL wxios_add_vaxis("plev", &
419	levmax(iff) - levmin(iff) + 1, rlevSTD(levmin(iff):levmax(iff)))
420	ENDIF
421	ENDIF
422
423	IF (clef_files(iff)) THEN
424	!!!!!!!!!!!!!!!!! Traitement dans le cas ou l'on veut stocker sur un domaine limite !!
425	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
426	IF (phys_out_regfkey(iff)) THEN
427	imin_ins=1
428	imax_ins=nbp_lon
429	jmin_ins=1
430	jmax_ins=jjmp1
431
432	! correction abderr
433	DO i=1,nbp_lon
434	WRITE(lunout,*)'io_lon(i)=',io_lon(i)
435	IF (io_lon(i).le.phys_out_lonmin(iff)) imin_ins=i
436	IF (io_lon(i).le.phys_out_lonmax(iff)) imax_ins=i+1
437	ENDDO
438
439	DO j=1,jjmp1
440	WRITE(lunout,*)'io_lat(j)=',io_lat(j)
441	IF (io_lat(j).ge.phys_out_latmin(iff)) jmax_ins=j+1
442	IF (io_lat(j).ge.phys_out_latmax(iff)) jmin_ins=j
443	ENDDO
444
445	WRITE(lunout,*)'On stoke le fichier histoire numero ',iff,' sur ', &
446	imin_ins,imax_ins,jmin_ins,jmax_ins
447	WRITE(lunout,*)'longitudes : ', &
448	io_lon(imin_ins),io_lon(imax_ins), &
449	'latitudes : ', &
450	io_lat(jmax_ins),io_lat(jmin_ins)
451
452	CALL histbeg(phys_out_filenames(iff),nbp_lon,io_lon,jjmp1,io_lat, &
453	imin_ins,imax_ins-imin_ins+1, &
454	jmin_ins,jmax_ins-jmin_ins+1, &
455	itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff))
456	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
457	!IM fichiers stations
458	ELSE IF (clef_stations(iff)) THEN
459
460	IF (prt_level >= 10) THEN
461	WRITE(lunout,*)'phys_output_open: iff=',iff,' phys_out_filenames(iff)=',phys_out_filenames(iff)
462	ENDIF
463
464	CALL histbeg_phy_all(rlon,rlat,pim,tabij,ipt,jpt,plon,plat,plon_bounds,plat_bounds, &
465	phys_out_filenames(iff), &
466	itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff))
467	ELSE
468
469	IF (prt_level >= 10) THEN
470	WRITE(lunout,*)'phys_output_open: iff=',iff,' phys_out_filenames(iff)=',phys_out_filenames(iff)
471	ENDIF
472
473	CALL histbeg_phy_all(phys_out_filenames(iff),itau_phy,zjulian,&
474	dtime,nhorim(iff),nid_files(iff))
475	ENDIF
476
477	#ifndef CPP_IOIPSL_NO_OUTPUT
478	IF (iff.LE.6.OR.iff.EQ.10) THEN
479	CALL histvert(nid_files(iff), "presnivs", "Vertical levels", "Pa", &
480	levmax(iff) - levmin(iff) + 1, &
481	presnivs(levmin(iff):levmax(iff)), nvertm(iff),"down")
482	!!!! Composantes de la coordonnee sigma-hybride
483	CALL histvert(nid_files(iff), "Ahyb","Ahyb comp of Hyb Cord ", "Pa", &
484	levmax(iff) - levmin(iff) + 1,aps,nvertap(iff))
485
486	CALL histvert(nid_files(iff), "Bhyb","Bhyb comp of Hyb Cord", " ", &
487	levmax(iff) - levmin(iff) + 1,bps,nvertbp(iff))
488
489	CALL histvert(nid_files(iff), "Alt","Height approx for scale heigh of 8km at levels", "Km", &
490	levmax(iff) - levmin(iff) + 1,pseudoalt,nvertAlt(iff))
491
492	ELSE
493	! NMC files
494	CALL histvert(nid_files(iff), "plev", "pressure", "Pa", &
495	levmax(iff) - levmin(iff) + 1, &
496	rlevSTD(levmin(iff):levmax(iff)), nvertm(iff), "down")
497	ENDIF
498	#endif
499
500	ENDIF ! clef_files
501
502	itr = 0
503	DO iq = 1, nqtot
504	IF(.NOT.(tracers(iq)%isAdvected .AND. tracers(iq)%isInPhysics)) CYCLE
505	itr = itr + 1
506	dn = 'd'//TRIM(tracers(iq)%name)//'_'
507
508	flag = [1, 5, 5, 5, 10, 10, 11, 11, 11, 11]
509	lnam = 'Tracer '//TRIM(tracers(iq)%longName)
510	tnam = TRIM(tracers(iq)%name); o_trac (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
511
512	flag = [4, 7, 7, 7, 10, 10, 11, 11, 11, 11]
513	lnam = 'Tendance tracer '//TRIM(tracers(iq)%longName)
514	tnam = TRIM(dn)//'vdf'; o_dtr_vdf (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
515
516	flag = [5, 7, 7, 7, 10, 10, 11, 11, 11, 11]
517	tnam = TRIM(dn)//'the'; o_dtr_the (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
518	tnam = TRIM(dn)//'con'; o_dtr_con (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
519
520	flag = [7, 7, 7, 7, 10, 10, 11, 11, 11, 11]
521	tnam = TRIM(dn)//'lessi_impa'; o_dtr_lessi_impa(itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
522	tnam = TRIM(dn)//'lessi_nucl'; o_dtr_lessi_nucl(itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
523	tnam = TRIM(dn)//'insc'; o_dtr_insc (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
524	tnam = TRIM(dn)//'bcscav'; o_dtr_bcscav (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
525	tnam = TRIM(dn)//'evapls'; o_dtr_evapls (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
526	tnam = TRIM(dn)//'ls'; o_dtr_ls (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
527	tnam = TRIM(dn)//'trsp'; o_dtr_trsp (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
528	tnam = TRIM(dn)//'sscav'; o_dtr_sscav (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
529	tnam = TRIM(dn)//'sat'; o_dtr_sat (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
530	tnam = TRIM(dn)//'uscav'; o_dtr_uscav (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
531
532	lnam = 'tracer tendency dry deposition'//TRIM(tracers(iq)%longName)
533	tnam = 'cum'//TRIM(dn)//'dry'; o_dtr_dry (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
534
535	flag = [1, 4, 10, 10, 10, 10, 11, 11, 11, 11]
536	lnam = 'Cumulated tracer '//TRIM(tracers(iq)%longName)
537	tnam = 'cum'//TRIM(tracers(iq)%name); o_trac_cum(itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
538	ENDDO
539
540	ENDDO ! iff
541
542	#ifdef ISO
543	write(,) 'phys_output_mid 589'
544	do ixt=1,ntraciso
545	outiso = TRIM(isoName(ixt))
546	i = INDEX(outiso, '_', .TRUE.)
547	outiso = outiso(1:i-1)//outiso(i+1:LEN_TRIM(outiso))
548
549	flag = [1, 1, 1, 10, 5, 10, 11, 11, 11, 11]; unit = 'kg/(s*m2)'
550	o_xtprecip(ixt)=ctrl_out(flag, 'precip'//TRIM(outiso), 'Precip Totale liq+sol', unit, [('',i=1,nfiles)])
551	o_xtpluc (ixt)=ctrl_out(flag, 'pluc'//TRIM(outiso), 'Convective Precip.', unit, [('',i=1,nfiles)])
552
553	flag = [1, 1, 1, 10, 10, 10, 11, 11, 11, 11]
554	o_xtplul (ixt)=ctrl_out(flag, 'plul'//TRIM(outiso), 'Large-scale Precip.', unit, [('',i=1,nfiles)])
555	o_xtevap (ixt)=ctrl_out(flag, 'evap'//TRIM(outiso), 'Evaporat.', unit, [('',i=1,nfiles)])
556
557	! ajout Camille 8 mai 2023
558	flag = [1, 6, 10, 10, 10, 10, 11, 11, 11, 11]
559	o_xtevap_srf (ixt,1)=ctrl_out(flag, 'evap_ter'//TRIM(outiso), 'Evap sfc'//clnsurf(1), unit, [('',i=1,nfiles)])
560	o_xtevap_srf (ixt,2)=ctrl_out(flag, 'evap_lic'//TRIM(outiso), 'Evap sfc'//clnsurf(2), unit, [('',i=1,nfiles)])
561	o_xtevap_srf (ixt,3)=ctrl_out(flag, 'evap_oce'//TRIM(outiso), 'Evap sfc'//clnsurf(3), unit, [('',i=1,nfiles)])
562	o_xtevap_srf (ixt,4)=ctrl_out(flag, 'evap_sic'//TRIM(outiso), 'Evap sfc'//clnsurf(4), unit, [('',i=1,nfiles)])
563
564	flag = [2, 3, 4, 10, 10, 10, 11, 11, 11, 11]; unit = 'kg/kg'
565	o_xtovap (ixt)=ctrl_out(flag, 'ovap'//TRIM(outiso), 'Specific humidity', unit, [('',i=1,nfiles)])
566	o_xtoliq (ixt)=ctrl_out(flag, 'oliq'//TRIM(outiso), 'Liquid water', unit, [('',i=1,nfiles)])
567	o_xtcond (ixt)=ctrl_out(flag, 'ocond'//TRIM(outiso), 'Condensed water', unit, [('',i=1,nfiles)])
568
569	flag = [4, 10, 10, 10, 10, 10, 11, 11, 11, 11]; unit = '(kg/kg)/s'
570	o_dxtdyn (ixt)=ctrl_out(flag, 'dqdyn'//TRIM(outiso), 'Dynamics dQ', unit, [('',i=1,nfiles)])
571	o_dxtldyn (ixt)=ctrl_out(flag, 'dqldyn'//TRIM(outiso), 'Dynamics dQL', unit, [('',i=1,nfiles)])
572	o_dxtcon (ixt)=ctrl_out(flag, 'dqcon'//TRIM(outiso), 'Convection dQ', unit, [('',i=1,nfiles)])
573	o_dxteva (ixt)=ctrl_out(flag, 'dqeva'//TRIM(outiso), 'Reevaporation dQ', unit, [('',i=1,nfiles)])
574	o_dxtlsc (ixt)=ctrl_out(flag, 'dqlsc'//TRIM(outiso), 'Condensation dQ', unit, [('',i=1,nfiles)])
575	o_dxtajs (ixt)=ctrl_out(flag, 'dqajs'//TRIM(outiso), 'Dry adjust. dQ', unit, [('',i=1,nfiles)])
576	o_dxtvdf (ixt)=ctrl_out(flag, 'dqvdf'//TRIM(outiso), 'Boundary-layer dQ', unit, [('',i=1,nfiles)])
577	o_dxtthe (ixt)=ctrl_out(flag, 'dqthe'//TRIM(outiso), 'Thermal dQ', unit, [('',i=1,nfiles)])
578
579	IF(ok_qch4) o_dxtch4(ixt)=ctrl_out(flag, 'dqch4'//TRIM(outiso), 'H2O due to CH4 oxidation & photolysis', &
580	unit, [('',i=1,nfiles)])
581	IF(ixt == iso_HTO) THEN
582	o_dxtprod_nucl(ixt)=ctrl_out(flag, 'dqprodnucl'//TRIM(outiso), 'dHTO/dt due to nuclear production', &
583	unit, [('',i=1,nfiles)])
584	o_dxtcosmo (ixt)=ctrl_out(flag, 'dqcosmo'//TRIM(outiso), 'dHTO/dt due to cosmogenic production', &
585	unit, [('',i=1,nfiles)])
586	o_dxtdecroiss (ixt)=ctrl_out(flag, 'dqdecroiss'//TRIM(outiso), 'dHTO/dt due to radiative destruction', &
587	unit, [('',i=1,nfiles)])
588	END IF
589	enddo !do ixt=1,niso
590	write(,) 'phys_output_mid 596'
591	#endif
592
593
594	! Updated write frequencies due to phys_out_filetimesteps.
595	! Write frequencies are now in seconds.
596	ecrit_mth = ecrit_files(1)
597	ecrit_day = ecrit_files(2)
598	ecrit_hf = ecrit_files(3)
599	ecrit_ins = ecrit_files(4)
600	ecrit_LES = ecrit_files(5)
601	ecrit_ins = ecrit_files(6)
602
603	IF (prt_level >= 10) THEN
604	WRITE(lunout,*)'swaerofree_diag=',swaerofree_diag
605	WRITE(lunout,*)'swaero_diag=',swaero_diag
606	WRITE(lunout,*)'dryaod_diag=',dryaod_diag
607	WRITE(lunout,*)'ok_4xCO2atm=',ok_4xCO2atm
608	WRITE(lunout,*)'phys_output_open: ends here'
609	ENDIF
610
611	END SUBROUTINE phys_output_open
612
613	SUBROUTINE convers_timesteps(str,dtime,timestep)
614
615	use ioipsl
616	USE phys_cal_mod
617	USE time_phylmdz_mod, ONLY: day_ref, annee_ref
618	USE print_control_mod, ONLY: lunout
619
620	IMPLICIT NONE
621
622	CHARACTER(LEN=20) :: str
623	CHARACTER(LEN=10) :: type
624	INTEGER :: ipos,il
625	real :: ttt,xxx,timestep,dayseconde,dtime
626	parameter (dayseconde=86400.)
627
628	ipos=scan(str,'0123456789.',.TRUE.)
629	!
630	il=len_trim(str)
631	WRITE(lunout,*) "ipos = ", ipos
632	WRITE(lunout,*) "il = ", il
633	IF (ipos == 0) CALL abort_physic("convers_timesteps", "bad str", 1)
634	read(str(1:ipos),*) ttt
635	WRITE(lunout,*)ttt
636	type=str(ipos+1:il)
637
638	IF ( il == ipos ) THEN
639	type='day'
640	ENDIF
641
642	IF ( type == 'day'.or.type == 'days'.or.type == 'jours'.or.type == 'jour' ) timestep = ttt * dayseconde
643	IF ( type == 'mounths'.or.type == 'mth'.or.type == 'mois' ) THEN
644	WRITE(lunout,*)'annee_ref,day_ref mon_len',annee_ref,day_ref,mth_len
645	timestep = ttt * dayseconde * mth_len
646	ENDIF
647	IF ( type == 'hours'.or.type == 'hr'.or.type == 'heurs') timestep = ttt * dayseconde / 24.
648	IF ( type == 'mn'.or.type == 'minutes' ) timestep = ttt * 60.
649	IF ( type == 's'.or.type == 'sec'.or.type == 'secondes' ) timestep = ttt
650	IF ( type == 'TS' ) timestep = ttt * dtime
651
652	WRITE(lunout,*)'type = ',type
653	WRITE(lunout,*)'nb j/h/m = ',ttt
654	WRITE(lunout,*)'timestep(s)=',timestep
655
656	END SUBROUTINE convers_timesteps
657
658	END MODULE phys_output_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format