Context Navigation

phys_output_mod.F90 @ 4263

Last change on this file since 4263 was 4170, checked in by dcugnet, 2 years ago

The variable "types_trac" is the equivalent of "type_trac" in case multiple sections must be read
and used in "tracer.def" file.
Tests on the "type_trac" were replaced with tests on the vector "types_trac".
Most of the time, there are two components: 'lmdz' and a second one. The later has priority on 'lmdz'
and must be used for the tests. For more components, care must be taken to execute specific parts
of the code on the right tracers ; the tracers(:)%component has been created in that respect.

File size: 27.8 KB

Line
1	! $Id: phys_output_mod.F90 3792 2021-01-04 17:01:25Z evignon $
2	!
3
4	MODULE phys_output_mod
5	USE indice_sol_mod
6	USE phys_output_var_mod
7	USE phys_output_write_mod, ONLY : phys_output_write
8	REAL, DIMENSION(nfiles),SAVE :: ecrit_files
9
10	! Abderrahmane 12 2007
11	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
12	!!! Ecreture des Sorties du modele dans les fichiers Netcdf :
13	! histmth.nc : moyennes mensuelles
14	! histday.nc : moyennes journalieres
15	! histhf.nc : moyennes toutes les 3 heures
16	! histins.nc : valeurs instantanees
17	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
18
19	CONTAINS
20
21	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
22	!!!!!!!!! Ouverture des fichier et definition des variable de sortie !!!!!!!!
23	!! histbeg, histvert et histdef
24	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
25
26	SUBROUTINE phys_output_open(rlon,rlat,pim,tabij,ipt,jpt,plon,plat, &
27	jjmp1,nlevSTD,clevSTD,rlevSTD, dtime, ok_veget, &
28	type_ocean, iflag_pbl,iflag_pbl_split,ok_mensuel,ok_journe, &
29	ok_hf,ok_instan,ok_LES,ok_ade,ok_aie, read_climoz, &
30	phys_out_filestations, &
31	aerosol_couple, flag_aerosol_strat, &
32	pdtphys, paprs, pphis, pplay, lmax_th, ptconv, ptconvth, ivap, &
33	d_u, d_t, qx, d_qx, zmasse, ok_sync)
34
35	USE iophy
36	USE dimphy
37	USE infotrac_phy, ONLY: nqtot, tracers, niso, ntraciso=>ntiso
38	USE strings_mod, ONLY: maxlen
39	USE ioipsl
40	USE phys_cal_mod, only : hour, calend
41	USE mod_phys_lmdz_para
42	!Martin
43	USE surface_data, ONLY : landice_opt
44	USE phys_output_ctrlout_mod
45	USE mod_grid_phy_lmdz, only: klon_glo,nbp_lon,nbp_lat
46	USE print_control_mod, ONLY: prt_level,lunout
47	USE vertical_layers_mod, ONLY: ap,bp,preff,presnivs, aps, bps, pseudoalt
48	USE time_phylmdz_mod, ONLY: day_ini, itau_phy, start_time, annee_ref, day_ref
49	#ifdef CPP_XIOS
50	! ug Pour les sorties XIOS
51	USE wxios
52	#endif
53	#ifdef ISO
54	USE isotopes_mod, ONLY: isoName,iso_HTO
55	#ifdef ISOTRAC
56	use isotrac_mod, only: index_zone,index_iso,strtrac
57	#endif
58	#endif
59
60	IMPLICIT NONE
61	include "clesphys.h"
62	include "alpale.h"
63	include "YOMCST.h"
64
65	! ug Nouveaux arguments n\'ecessaires au histwrite_mod:
66	INTEGER, INTENT(IN) :: ivap
67	INTEGER, DIMENSION(klon), INTENT(IN) :: lmax_th
68	LOGICAL, INTENT(IN) :: ok_sync
69	LOGICAL, DIMENSION(klon, klev), INTENT(IN) :: ptconv, ptconvth
70	REAL, INTENT(IN) :: pdtphys
71	REAL, DIMENSION(klon), INTENT(IN) :: pphis
72	REAL, DIMENSION(klon, klev), INTENT(IN) :: pplay, d_u, d_t
73	REAL, DIMENSION(klon, klev+1), INTENT(IN) :: paprs
74	REAL, DIMENSION(klon,klev,nqtot), INTENT(IN):: qx, d_qx
75	REAL, DIMENSION(klon, klev), INTENT(IN) :: zmasse
76
77
78	REAL,DIMENSION(klon),INTENT(IN) :: rlon
79	REAL,DIMENSION(klon),INTENT(IN) :: rlat
80	INTEGER, INTENT(IN) :: pim
81	INTEGER, DIMENSION(pim) :: tabij
82	INTEGER,DIMENSION(pim), INTENT(IN) :: ipt, jpt
83	REAL,DIMENSION(pim), INTENT(IN) :: plat, plon
84	REAL,DIMENSION(pim,2) :: plat_bounds, plon_bounds
85
86	INTEGER :: jjmp1
87	INTEGER :: nlevSTD, radpas
88	LOGICAL :: ok_mensuel, ok_journe, ok_hf, ok_instan
89	LOGICAL :: ok_LES,ok_ade,ok_aie
90	INTEGER :: flag_aerosol_strat
91	LOGICAL :: aerosol_couple
92	INTEGER, INTENT(IN):: read_climoz ! read ozone climatology
93	! Allowed values are 0, 1 and 2
94	! 0: do not read an ozone climatology
95	! 1: read a single ozone climatology that will be used day and night
96	! 2: read two ozone climatologies, the average day and night
97	! climatology and the daylight climatology
98
99	REAL :: dtime
100	INTEGER :: idayref
101	REAL :: zjulian_start, zjulian
102	CHARACTER(LEN=4), DIMENSION(nlevSTD) :: clevSTD
103	REAL, DIMENSION(nlevSTD) :: rlevSTD
104	INTEGER :: nsrf, k, iq, iff, i, j, ilev, itr, ixt, iiso, izone
105	INTEGER :: naero
106	LOGICAL :: ok_veget
107	INTEGER :: iflag_pbl
108	INTEGER :: iflag_pbl_split
109	CHARACTER(LEN=4) :: bb2
110	CHARACTER(LEN=2) :: bb3
111	CHARACTER(LEN=6) :: type_ocean
112	INTEGER, DIMENSION(nbp_lon*jjmp1) :: ndex2d
113	INTEGER, DIMENSION(nbp_lonjjmp1klev) :: ndex3d
114	INTEGER :: imin_ins, imax_ins
115	INTEGER :: jmin_ins, jmax_ins
116	INTEGER, DIMENSION(nfiles) :: phys_out_levmin, phys_out_levmax
117	INTEGER, DIMENSION(nfiles) :: phys_out_filelevels
118	CHARACTER(LEN=20), DIMENSION(nfiles) :: chtimestep = (/ 'Default', 'Default', 'Default', 'Default', 'Default', &
119	'Default', 'Default', 'Default', 'Default', 'Default' /)
120	LOGICAL, DIMENSION(nfiles) :: phys_out_filekeys
121	LOGICAL, DIMENSION(nfiles) :: phys_out_filestations
122
123	#ifdef ISO
124	CHARACTER(LEN=maxlen) :: outiso
125	CHARACTER(LEN=20) :: unit
126	#endif
127	CHARACTER(LEN=maxlen) :: tnam, lnam, dn
128	INTEGER :: flag(nfiles)
129
130	!!!!!!!!!! stockage dans une region limitee pour chaque fichier !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
131	! entre [phys_out_lonmin,phys_out_lonmax] et [phys_out_latmin,phys_out_latmax]
132	LOGICAL, DIMENSION(nfiles), SAVE :: &
133	phys_out_regfkey = [.FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE.]
134	REAL, DIMENSION(nfiles), SAVE :: &
135	phys_out_lonmin = [ -180., -180., -180., -180., -180., -180., -180., -180., -180., -180.], &
136	phys_out_lonmax = [ 180., 180., 180., 180., 180., 180., 180., 180., 180., 180.], &
137	phys_out_latmin = [ -90., -90., -90., -90., -90., -90., -90., -90., -90., -90.], &
138	phys_out_latmax = [ 90., 90., 90., 90., 90., 90., 90., 90., 90., 90.]
139	REAL, DIMENSION(klev,2) :: Ahyb_bounds, Bhyb_bounds
140	REAL, DIMENSION(klev+1) :: lev_index
141
142	#ifdef CPP_XIOS
143	! ug Variables utilis\'ees pour r\'ecup\'erer le calendrier pour xios
144	INTEGER :: x_an, x_mois, x_jour
145	REAL :: x_heure
146	INTEGER :: ini_an, ini_mois, ini_jour
147	REAL :: ini_heure
148	#endif
149	INTEGER :: ISW
150	REAL, DIMENSION(NSW) :: wl1_sun, wl2_sun !wavelength bounds (in um) for SW
151	REAL, DIMENSION(NSW) :: wn1_sun, wn2_sun !wavenumber bounds (in m-1) for SW
152	REAL, DIMENSION(NSW) :: spectband !mean wavenumb. of each sp.band
153	REAL, DIMENSION(NSW,2) :: spbnds_sun !bounds of spectband
154
155	WRITE(lunout,*) 'Debut phys_output_mod.F90'
156	! Initialisations (Valeurs par defaut
157
158	DO ilev=1,klev
159	Ahyb_bounds(ilev,1) = ap(ilev)
160	Ahyb_bounds(ilev,2) = ap(ilev+1)
161	Bhyb_bounds(ilev,1) = bp(ilev)
162	Bhyb_bounds(ilev,2) = bp(ilev+1)
163	lev_index(ilev) = REAL(ilev)
164	END DO
165	lev_index(klev+1) = REAL(klev+1)
166
167	IF (.NOT. ALLOCATED(o_trac)) ALLOCATE(o_trac(nqtot))
168	IF (.NOT. ALLOCATED(o_trac_cum)) ALLOCATE(o_trac_cum(nqtot))
169	ALLOCATE(o_dtr_the(nqtot),o_dtr_con(nqtot),o_dtr_lessi_impa(nqtot))
170	ALLOCATE(o_dtr_lessi_nucl(nqtot),o_dtr_insc(nqtot),o_dtr_bcscav(nqtot))
171	ALLOCATE(o_dtr_evapls(nqtot),o_dtr_ls(nqtot),o_dtr_trsp(nqtot))
172	ALLOCATE(o_dtr_sscav(nqtot),o_dtr_sat(nqtot),o_dtr_uscav(nqtot))
173	ALLOCATE(o_dtr_dry(nqtot),o_dtr_vdf(nqtot))
174
175	#ifdef ISO
176	ALLOCATE(o_xtprecip(ntraciso))
177	ALLOCATE(o_xtplul(ntraciso))
178	ALLOCATE(o_xtpluc(ntraciso))
179	ALLOCATE(o_xtevap(ntraciso))
180	ALLOCATE(o_xtovap(ntraciso))
181	ALLOCATE(o_xtoliq(ntraciso))
182	ALLOCATE(o_xtcond(ntraciso))
183	ALLOCATE(o_dxtdyn(ntraciso))
184	ALLOCATE(o_dxtldyn(ntraciso))
185	ALLOCATE(o_dxtcon(ntraciso))
186	ALLOCATE(o_dxtlsc(ntraciso))
187	ALLOCATE(o_dxteva(ntraciso))
188	ALLOCATE(o_dxtajs(ntraciso))
189	ALLOCATE(o_dxtvdf(ntraciso))
190	ALLOCATE(o_dxtthe(ntraciso))
191	ALLOCATE(o_dxtch4(ntraciso))
192	if (iso_HTO.gt.0) then
193	ALLOCATE(o_dxtprod_nucl(ntraciso))
194	ALLOCATE(o_dxtcosmo(ntraciso))
195	ALLOCATE(o_dxtdecroiss(ntraciso))
196	endif
197	#endif
198
199	levmax = (/ klev, klev, klev, klev, klev, klev, nlevSTD, nlevSTD, nlevSTD, klev /)
200
201	phys_out_filenames(1) = 'histmth'
202	phys_out_filenames(2) = 'histday'
203	phys_out_filenames(3) = 'histhf6h'
204	phys_out_filenames(4) = 'histhf3h'
205	phys_out_filenames(5) = 'histhf3hm'
206	phys_out_filenames(6) = 'histstn'
207	phys_out_filenames(7) = 'histmthNMC'
208	phys_out_filenames(8) = 'histdayNMC'
209	phys_out_filenames(9) = 'histhfNMC'
210	phys_out_filenames(10)= 'histstrataer'
211
212	type_ecri(1) = 'ave(X)'
213	type_ecri(2) = 'ave(X)'
214	type_ecri(3) = 'inst(X)'
215	type_ecri(4) = 'inst(X)'
216	type_ecri(5) = 'ave(X)'
217	type_ecri(6) = 'inst(X)'
218	type_ecri(7) = 'inst(X)'
219	type_ecri(8) = 'inst(X)'
220	type_ecri(9) = 'inst(X)'
221	type_ecri(10)= 'ave(X)'
222
223	clef_files(1) = ok_mensuel
224	clef_files(2) = ok_journe
225	clef_files(3) = ok_hf
226	clef_files(4) = ok_instan
227	clef_files(5) = ok_LES
228	clef_files(6) = ok_instan
229	clef_files(7) = ok_histNMC(1)
230	clef_files(8) = ok_histNMC(2)
231	clef_files(9) = ok_histNMC(3)
232	#ifdef CPP_StratAer
233	clef_files(10)= .TRUE.
234	#else
235	clef_files(10)= .FALSE.
236	#endif
237
238	!sortir des fichiers "stations" si clef_stations(:)=.TRUE.
239	clef_stations(1) = .FALSE.
240	clef_stations(2) = .FALSE.
241	clef_stations(3) = .FALSE.
242	clef_stations(4) = .FALSE.
243	clef_stations(5) = .FALSE.
244	clef_stations(6) = .FALSE.
245	clef_stations(7) = .FALSE.
246	clef_stations(8) = .FALSE.
247	clef_stations(9) = .FALSE.
248	clef_stations(10)= .FALSE.
249
250	lev_files(1) = lev_histmth
251	lev_files(2) = lev_histday
252	lev_files(3) = lev_histhf
253	lev_files(4) = lev_histins
254	lev_files(5) = lev_histLES
255	lev_files(6) = lev_histins
256	lev_files(7) = levout_histNMC(1)
257	lev_files(8) = levout_histNMC(2)
258	lev_files(9) = levout_histNMC(3)
259	lev_files(10)= 5
260
261	ecrit_files(1) = ecrit_mth
262	ecrit_files(2) = ecrit_day
263	ecrit_files(3) = ecrit_hf
264	ecrit_files(4) = ecrit_ins
265	ecrit_files(5) = ecrit_LES
266	ecrit_files(6) = ecrit_ins
267	ecrit_files(7) = freq_outNMC(1)
268	ecrit_files(8) = freq_outNMC(2)
269	ecrit_files(9) = freq_outNMC(3)
270	ecrit_files(10)= ecrit_mth
271
272	!! Lectures des parametres de sorties dans physiq.def
273
274	CALL getin('phys_out_regfkey',phys_out_regfkey)
275	CALL getin('phys_out_lonmin',phys_out_lonmin)
276	CALL getin('phys_out_lonmax',phys_out_lonmax)
277	CALL getin('phys_out_latmin',phys_out_latmin)
278	CALL getin('phys_out_latmax',phys_out_latmax)
279	phys_out_levmin(:)=levmin(:)
280	CALL getin('phys_out_levmin',levmin)
281	phys_out_levmax(:)=levmax(:)
282	CALL getin('phys_out_levmax',levmax)
283	CALL getin('phys_out_filenames',phys_out_filenames)
284	phys_out_filekeys(:)=clef_files(:)
285	CALL getin('phys_out_filekeys',clef_files)
286	phys_out_filestations(:)=clef_stations(:)
287	CALL getin('phys_out_filestations',clef_stations)
288	phys_out_filelevels(:)=lev_files(:)
289	CALL getin('phys_out_filelevels',lev_files)
290	CALL getin('phys_out_filetimesteps',chtimestep)
291	phys_out_filetypes(:)=type_ecri(:)
292	CALL getin('phys_out_filetypes',type_ecri)
293
294	type_ecri_files(:)=type_ecri(:)
295
296	! if (ok_all_xml) phys_out_filelevels = 999
297
298	WRITE(lunout,*)'phys_out_lonmin=',phys_out_lonmin
299	WRITE(lunout,*)'phys_out_lonmax=',phys_out_lonmax
300	WRITE(lunout,*)'phys_out_latmin=',phys_out_latmin
301	WRITE(lunout,*)'phys_out_latmax=',phys_out_latmax
302	WRITE(lunout,*)'phys_out_filenames=',phys_out_filenames
303	WRITE(lunout,*)'phys_out_filetypes=',type_ecri
304	WRITE(lunout,*)'phys_out_filekeys=',clef_files
305	WRITE(lunout,*)'phys_out_filestations=',clef_stations
306	WRITE(lunout,*)'phys_out_filelevels=',lev_files
307	WRITE(lunout,*)'phys_out_regfkey=',phys_out_regfkey
308
309	! A noter pour
310	! l heure initiale - dans les fichiers histoire hist* - on met comme
311	! heure de debut soit la vraie heure (pour le 1D) soit 0h (pour le 3D)
312	! afin d avoir une seule sortie mensuelle par mois lorsque l on tourne
313	! par annee (IM).
314	!
315	idayref = day_ref
316	IF (klon_glo==1) THEN
317	! current_time (used to compute hour) is updated at the begining of
318	! the physics; to set the correct outputs "initial time" we thus
319	! have to use (hour-dtphys).
320	CALL ymds2ju(annee_ref, 1, idayref, hour-pdtphys, zjulian)
321	print *,'phys_output_mod: annee,iday,hour,zjulian=',annee_ref,idayref, hour, zjulian
322	ELSE
323	CALL ymds2ju(annee_ref, 1, idayref, 0.0, zjulian)
324	CALL ymds2ju(annee_ref, 1, day_ini, start_time*rday, zjulian_start)
325	ENDIF
326
327	#ifdef CPP_XIOS
328	! ug R\'eglage du calendrier xios
329	!Temps julian => an, mois, jour, heure
330	CALL ju2ymds(zjulian, x_an, x_mois, x_jour, x_heure)
331	CALL ju2ymds(zjulian_start, ini_an, ini_mois, ini_jour, ini_heure)
332	CALL wxios_set_cal(dtime, calend, x_an, x_mois, x_jour, x_heure, ini_an, &
333	ini_mois, ini_jour, ini_heure )
334	#endif
335
336	!!!!!!!!!!!!!!!!!!!!!!! Boucle sur les fichiers !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
337	! Appel de histbeg et histvert pour creer le fichier et les niveaux verticaux !!
338	! Appel des histbeg pour definir les variables (nom, moy ou inst, freq de sortie ..
339	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
340
341	zdtime_moy = dtime ! Frequence ou l on moyenne
342
343
344	ecrit_files(7) = ecrit_files(1)
345	ecrit_files(8) = ecrit_files(2)
346	ecrit_files(9) = ecrit_files(3)
347
348	DO iff=1,nfiles
349
350	! Calculate ecrit_files for all files
351	IF ( chtimestep(iff).eq.'Default' ) THEN
352	! Par defaut ecrit_files = (ecrit_mensuel ecrit_jour ecrit_hf
353	! ...)*86400.
354	ecrit_files(iff)=ecrit_files(iff)*86400.
355	ELSE IF (chtimestep(iff).eq.'-1') THEN
356	PRINT*,'ecrit_files(',iff,') < 0 so IOIPSL work on different'
357	PRINT*,'months length'
358	ecrit_files(iff)=-1.
359	ELSE
360	CALL convers_timesteps(chtimestep(iff),dtime,ecrit_files(iff))
361	ENDIF
362
363	WRITE(lunout,*)'ecrit_files(',iff,')= ',ecrit_files(iff)
364	zoutm(iff) = ecrit_files(iff) ! Frequence ou l on ecrit en seconde
365
366
367	#ifdef CPP_XIOS
368	!!! Ouverture de chaque fichier XIOS !!!!!!!!!!!
369	IF (.not. ok_all_xml) THEN
370	IF (prt_level >= 10) THEN
371	print*,'phys_output_open: call wxios_add_file with phys_out_filenames(iff)=',trim(phys_out_filenames(iff))
372	ENDIF
373	CALL wxios_add_file(phys_out_filenames(iff),chtimestep(iff),lev_files(iff))
374	ENDIF
375
376	!!! Declaration des axes verticaux de chaque fichier:
377	IF (prt_level >= 10) THEN
378	print*,'phys_output_open: Declare vertical axes for each file'
379	ENDIF
380
381	IF (iff.LE.6.OR.iff.EQ.10) THEN
382	CALL wxios_add_vaxis("presnivs", &
383	levmax(iff) - levmin(iff) + 1, presnivs(levmin(iff):levmax(iff)))
384	CALL wxios_add_vaxis("Ahyb", &
385	levmax(iff) - levmin(iff) + 1, aps(levmin(iff):levmax(iff)), positif='down', &
386	bnds=Ahyb_bounds(levmin(iff):levmax(iff),:))
387	CALL wxios_add_vaxis("Bhyb", &
388	levmax(iff) - levmin(iff) + 1, bps(levmin(iff):levmax(iff)), positif='down', &
389	bnds=Bhyb_bounds(levmin(iff):levmax(iff),:))
390	CALL wxios_add_vaxis("klev", levmax(iff) - levmin(iff) + 1, &
391	lev_index(levmin(iff):levmax(iff)))
392	CALL wxios_add_vaxis("klevp1", klev+1, &
393	lev_index(1:klev+1))
394	CALL wxios_add_vaxis("bnds", 2, (/1.,2./))
395
396	CALL wxios_add_vaxis("Alt", &
397	levmax(iff) - levmin(iff) + 1, pseudoalt)
398
399	! wl1_sun/wl2_sun: minimum/maximum bound of wavelength (in um)
400	SELECT CASE(NSW)
401	CASE(6)
402	wl1_sun(1:6) = [0.180, 0.250, 0.440, 0.690, 1.190, 2.380]
403	wl2_sun(1:6) = [0.250, 0.440, 0.690, 1.190, 2.380, 4.000]
404	CASE(2)
405	wl1_sun(1:2) = [0.250, 0.690]
406	wl2_sun(1:2) = [0.690, 4.000]
407	END SELECT
408
409	DO ISW=1, NSW
410	wn1_sun(ISW)=1.e+6/wl1_sun(ISW)
411	wn2_sun(ISW)=1.e+6/wl2_sun(ISW)
412	spbnds_sun(ISW,1)=wn2_sun(ISW)
413	spbnds_sun(ISW,2)=wn1_sun(ISW)
414	spectband(ISW)=(wn1_sun(ISW)+wn2_sun(ISW))/2
415	ENDDO
416	!
417	!!! ajout axe vertical spectband : solar band number
418	CALL wxios_add_vaxis("spectband", NSW, spectband, positif='down')
419	ELSE
420	! NMC files
421	CALL wxios_add_vaxis("plev", &
422	levmax(iff) - levmin(iff) + 1, rlevSTD(levmin(iff):levmax(iff)))
423	ENDIF
424	#endif
425
426	IF (clef_files(iff)) THEN
427	!!!!!!!!!!!!!!!!! Traitement dans le cas ou l'on veut stocker sur un domaine limite !!
428	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
429	IF (phys_out_regfkey(iff)) THEN
430	imin_ins=1
431	imax_ins=nbp_lon
432	jmin_ins=1
433	jmax_ins=jjmp1
434
435	! correction abderr
436	DO i=1,nbp_lon
437	WRITE(lunout,*)'io_lon(i)=',io_lon(i)
438	IF (io_lon(i).le.phys_out_lonmin(iff)) imin_ins=i
439	IF (io_lon(i).le.phys_out_lonmax(iff)) imax_ins=i+1
440	ENDDO
441
442	DO j=1,jjmp1
443	WRITE(lunout,*)'io_lat(j)=',io_lat(j)
444	IF (io_lat(j).ge.phys_out_latmin(iff)) jmax_ins=j+1
445	IF (io_lat(j).ge.phys_out_latmax(iff)) jmin_ins=j
446	ENDDO
447
448	WRITE(lunout,*)'On stoke le fichier histoire numero ',iff,' sur ', &
449	imin_ins,imax_ins,jmin_ins,jmax_ins
450	WRITE(lunout,*)'longitudes : ', &
451	io_lon(imin_ins),io_lon(imax_ins), &
452	'latitudes : ', &
453	io_lat(jmax_ins),io_lat(jmin_ins)
454
455	CALL histbeg(phys_out_filenames(iff),nbp_lon,io_lon,jjmp1,io_lat, &
456	imin_ins,imax_ins-imin_ins+1, &
457	jmin_ins,jmax_ins-jmin_ins+1, &
458	itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff))
459	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
460	!IM fichiers stations
461	ELSE IF (clef_stations(iff)) THEN
462
463	IF (prt_level >= 10) THEN
464	WRITE(lunout,*)'phys_output_open: iff=',iff,' phys_out_filenames(iff)=',phys_out_filenames(iff)
465	ENDIF
466
467	CALL histbeg_phy_all(rlon,rlat,pim,tabij,ipt,jpt,plon,plat,plon_bounds,plat_bounds, &
468	phys_out_filenames(iff), &
469	itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff))
470	ELSE
471
472	IF (prt_level >= 10) THEN
473	WRITE(lunout,*)'phys_output_open: iff=',iff,' phys_out_filenames(iff)=',phys_out_filenames(iff)
474	ENDIF
475
476	CALL histbeg_phy_all(phys_out_filenames(iff),itau_phy,zjulian,&
477	dtime,nhorim(iff),nid_files(iff))
478	ENDIF
479
480	#ifndef CPP_IOIPSL_NO_OUTPUT
481	IF (iff.LE.6.OR.iff.EQ.10) THEN
482	CALL histvert(nid_files(iff), "presnivs", "Vertical levels", "Pa", &
483	levmax(iff) - levmin(iff) + 1, &
484	presnivs(levmin(iff):levmax(iff)), nvertm(iff),"down")
485	!!!! Composantes de la coordonnee sigma-hybride
486	CALL histvert(nid_files(iff), "Ahyb","Ahyb comp of Hyb Cord ", "Pa", &
487	levmax(iff) - levmin(iff) + 1,aps,nvertap(iff))
488
489	CALL histvert(nid_files(iff), "Bhyb","Bhyb comp of Hyb Cord", " ", &
490	levmax(iff) - levmin(iff) + 1,bps,nvertbp(iff))
491
492	CALL histvert(nid_files(iff), "Alt","Height approx for scale heigh of 8km at levels", "Km", &
493	levmax(iff) - levmin(iff) + 1,pseudoalt,nvertAlt(iff))
494
495	ELSE
496	! NMC files
497	CALL histvert(nid_files(iff), "plev", "pressure", "Pa", &
498	levmax(iff) - levmin(iff) + 1, &
499	rlevSTD(levmin(iff):levmax(iff)), nvertm(iff), "down")
500	ENDIF
501	#endif
502
503	ENDIF ! clef_files
504
505	itr = 0
506	DO iq = 1, nqtot
507	IF(.NOT.(tracers(iq)%isAdvected .AND. tracers(iq)%isInPhysics)) CYCLE
508	itr = itr + 1
509	dn = 'd'//TRIM(tracers(iq)%name)//'_'
510
511	flag = [1, 5, 5, 5, 10, 10, 11, 11, 11, 11]
512	lnam = 'Tracer '//TRIM(tracers(iq)%longName)
513	tnam = TRIM(tracers(iq)%name); o_trac (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
514
515	flag = [4, 7, 7, 7, 10, 10, 11, 11, 11, 11]
516	lnam = 'Tendance tracer '//TRIM(tracers(iq)%longName)
517	tnam = TRIM(dn)//'vdf'; o_dtr_vdf (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
518
519	flag = [5, 7, 7, 7, 10, 10, 11, 11, 11, 11]
520	tnam = TRIM(dn)//'the'; o_dtr_the (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
521	tnam = TRIM(dn)//'con'; o_dtr_con (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
522
523	flag = [7, 7, 7, 7, 10, 10, 11, 11, 11, 11]
524	tnam = TRIM(dn)//'lessi_impa'; o_dtr_lessi_impa(itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
525	tnam = TRIM(dn)//'lessi_nucl'; o_dtr_lessi_nucl(itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
526	tnam = TRIM(dn)//'insc'; o_dtr_insc (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
527	tnam = TRIM(dn)//'bcscav'; o_dtr_bcscav (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
528	tnam = TRIM(dn)//'evapls'; o_dtr_evapls (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
529	tnam = TRIM(dn)//'ls'; o_dtr_ls (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
530	tnam = TRIM(dn)//'trsp'; o_dtr_trsp (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
531	tnam = TRIM(dn)//'sscav'; o_dtr_sscav (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
532	tnam = TRIM(dn)//'sat'; o_dtr_sat (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
533	tnam = TRIM(dn)//'uscav'; o_dtr_uscav (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
534
535	lnam = 'tracer tendency dry deposition'//TRIM(tracers(iq)%longName)
536	tnam = 'cum'//TRIM(dn)//'dry'; o_dtr_dry (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
537
538	flag = [1, 4, 10, 10, 10, 10, 11, 11, 11, 11]
539	lnam = 'Cumulated tracer '//TRIM(tracers(iq)%longName)
540	tnam = 'cum'//TRIM(tracers(iq)%name); o_trac_cum(itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
541	ENDDO
542
543	ENDDO ! iff
544
545	#ifdef ISO
546	write(,) 'phys_output_mid 589'
547	do ixt=1,ntraciso
548	outiso = TRIM(isoName(ixt))
549	i = INDEX(outiso, '_', .TRUE.)
550	outiso = outiso(1:i-1)//outiso(i+1:LEN_TRIM(outiso))
551
552	flag = [1, 1, 1, 10, 5, 10, 11, 11, 11, 11]; unit = 'kg/(s*m2)'
553	o_xtprecip(ixt)=ctrl_out(flag, 'precip'//TRIM(outiso), 'Precip Totale liq+sol', unit, [('',i=1,nfiles)])
554	o_xtpluc (ixt)=ctrl_out(flag, 'pluc'//TRIM(outiso), 'Convective Precip.', unit, [('',i=1,nfiles)])
555
556	flag = [1, 1, 1, 10, 10, 10, 11, 11, 11, 11]
557	o_xtplul (ixt)=ctrl_out(flag, 'plul'//TRIM(outiso), 'Large-scale Precip.', unit, [('',i=1,nfiles)])
558	o_xtevap (ixt)=ctrl_out(flag, 'evap'//TRIM(outiso), 'Evaporat.', unit, [('',i=1,nfiles)])
559
560	flag = [2, 3, 4, 10, 10, 10, 11, 11, 11, 11]; unit = 'kg/kg'
561	o_xtovap (ixt)=ctrl_out(flag, 'ovap'//TRIM(outiso), 'Specific humidity', unit, [('',i=1,nfiles)])
562	o_xtoliq (ixt)=ctrl_out(flag, 'oliq'//TRIM(outiso), 'Liquid water', unit, [('',i=1,nfiles)])
563	o_xtcond (ixt)=ctrl_out(flag, 'ocond'//TRIM(outiso), 'Condensed water', unit, [('',i=1,nfiles)])
564
565	flag = [4, 10, 10, 10, 10, 10, 11, 11, 11, 11]; unit = '(kg/kg)/s'
566	o_dxtdyn (ixt)=ctrl_out(flag, 'dqdyn'//TRIM(outiso), 'Dynamics dQ', unit, [('',i=1,nfiles)])
567	o_dxtldyn (ixt)=ctrl_out(flag, 'dqldyn'//TRIM(outiso), 'Dynamics dQL', unit, [('',i=1,nfiles)])
568	o_dxtcon (ixt)=ctrl_out(flag, 'dqcon'//TRIM(outiso), 'Convection dQ', unit, [('',i=1,nfiles)])
569	o_dxteva (ixt)=ctrl_out(flag, 'dqeva'//TRIM(outiso), 'Reevaporation dQ', unit, [('',i=1,nfiles)])
570	o_dxtlsc (ixt)=ctrl_out(flag, 'dqlsc'//TRIM(outiso), 'Condensation dQ', unit, [('',i=1,nfiles)])
571	o_dxtajs (ixt)=ctrl_out(flag, 'dqajs'//TRIM(outiso), 'Dry adjust. dQ', unit, [('',i=1,nfiles)])
572	o_dxtvdf (ixt)=ctrl_out(flag, 'dqvdf'//TRIM(outiso), 'Boundary-layer dQ', unit, [('',i=1,nfiles)])
573	o_dxtthe (ixt)=ctrl_out(flag, 'dqthe'//TRIM(outiso), 'Thermal dQ', unit, [('',i=1,nfiles)])
574
575	IF(ok_qch4) o_dxtch4(ixt)=ctrl_out(flag, 'dqch4'//TRIM(outiso), 'H2O due to CH4 oxidation & photolysis', &
576	unit, [('',i=1,nfiles)])
577	IF(ixt == iso_HTO) THEN
578	o_dxtprod_nucl(ixt)=ctrl_out(flag, 'dqprodnucl'//TRIM(outiso), 'dHTO/dt due to nuclear production', &
579	unit, [('',i=1,nfiles)])
580	o_dxtcosmo (ixt)=ctrl_out(flag, 'dqcosmo'//TRIM(outiso), 'dHTO/dt due to cosmogenic production', &
581	unit, [('',i=1,nfiles)])
582	o_dxtdecroiss (ixt)=ctrl_out(flag, 'dqdecroiss'//TRIM(outiso), 'dHTO/dt due to radiative destruction', &
583	unit, [('',i=1,nfiles)])
584	END IF
585	enddo !do ixt=1,niso
586	write(,) 'phys_output_mid 596'
587	#endif
588
589
590	! Updated write frequencies due to phys_out_filetimesteps.
591	! Write frequencies are now in seconds.
592	ecrit_mth = ecrit_files(1)
593	ecrit_day = ecrit_files(2)
594	ecrit_hf = ecrit_files(3)
595	ecrit_ins = ecrit_files(4)
596	ecrit_LES = ecrit_files(5)
597	ecrit_ins = ecrit_files(6)
598
599	IF (prt_level >= 10) THEN
600	WRITE(lunout,*)'swaerofree_diag=',swaerofree_diag
601	WRITE(lunout,*)'swaero_diag=',swaero_diag
602	WRITE(lunout,*)'dryaod_diag=',dryaod_diag
603	WRITE(lunout,*)'ok_4xCO2atm=',ok_4xCO2atm
604	WRITE(lunout,*)'phys_output_open: ends here'
605	ENDIF
606
607	END SUBROUTINE phys_output_open
608
609	SUBROUTINE convers_timesteps(str,dtime,timestep)
610
611	use ioipsl
612	USE phys_cal_mod
613	USE time_phylmdz_mod, ONLY: day_ref, annee_ref
614	USE print_control_mod, ONLY: lunout
615
616	IMPLICIT NONE
617
618	CHARACTER(LEN=20) :: str
619	CHARACTER(LEN=10) :: type
620	INTEGER :: ipos,il
621	real :: ttt,xxx,timestep,dayseconde,dtime
622	parameter (dayseconde=86400.)
623
624	ipos=scan(str,'0123456789.',.TRUE.)
625	!
626	il=len_trim(str)
627	WRITE(lunout,*) "ipos = ", ipos
628	WRITE(lunout,*) "il = ", il
629	IF (ipos == 0) CALL abort_physic("convers_timesteps", "bad str", 1)
630	read(str(1:ipos),*) ttt
631	WRITE(lunout,*)ttt
632	type=str(ipos+1:il)
633
634	IF ( il == ipos ) THEN
635	type='day'
636	ENDIF
637
638	IF ( type == 'day'.or.type == 'days'.or.type == 'jours'.or.type == 'jour' ) timestep = ttt * dayseconde
639	IF ( type == 'mounths'.or.type == 'mth'.or.type == 'mois' ) THEN
640	WRITE(lunout,*)'annee_ref,day_ref mon_len',annee_ref,day_ref,mth_len
641	timestep = ttt * dayseconde * mth_len
642	ENDIF
643	IF ( type == 'hours'.or.type == 'hr'.or.type == 'heurs') timestep = ttt * dayseconde / 24.
644	IF ( type == 'mn'.or.type == 'minutes' ) timestep = ttt * 60.
645	IF ( type == 's'.or.type == 'sec'.or.type == 'secondes' ) timestep = ttt
646	IF ( type == 'TS' ) timestep = ttt * dtime
647
648	WRITE(lunout,*)'type = ',type
649	WRITE(lunout,*)'nb j/h/m = ',ttt
650	WRITE(lunout,*)'timestep(s)=',timestep
651
652	END SUBROUTINE convers_timesteps
653
654	END MODULE phys_output_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format