Context Navigation

phys_output_mod.F90 @ 4143

Last change on this file since 4143 was 4143, checked in by dcugnet, 2 years ago

Some variables are renamed or replaced by direct equivalents:
- iso_indnum -> tracers(:)%iso_iName
- niso_possibles -> niso
- iqiso -> iqIsoPha ; index_trac -> itZonIso
- ok_iso_verif -> isoCheck
- ntraceurs_zone -> nzone ; ntraciso -> ntiso
- qperemin -> min_qparent ; masseqmin -> min_qmass ; ratiomin -> min_ratio
Some renamed variables are only aliased with the older name (using USE <module>, ONLY: <oldName> => <newName>) in routines where they are repeated many times.
Few hard-coded indexes are now computed (examples: ilic, iso, ivap, irneb, iq_vap, iq_liq, iso_H2O, iso_HDO, iso_HTO, iso_O17, iso_O18).
The IF(isoCheck) test is now embedded in the check_isotopes_seq and check_isotopes_loc routines (lighter calling).

File size: 28.0 KB

Line
1	! $Id: phys_output_mod.F90 3792 2021-01-04 17:01:25Z evignon $
2	!
3
4	MODULE phys_output_mod
5	USE indice_sol_mod
6	USE phys_output_var_mod
7	USE phys_output_write_mod, ONLY : phys_output_write
8	REAL, DIMENSION(nfiles),SAVE :: ecrit_files
9
10	! Abderrahmane 12 2007
11	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
12	!!! Ecreture des Sorties du modele dans les fichiers Netcdf :
13	! histmth.nc : moyennes mensuelles
14	! histday.nc : moyennes journalieres
15	! histhf.nc : moyennes toutes les 3 heures
16	! histins.nc : valeurs instantanees
17	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
18
19	CONTAINS
20
21	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
22	!!!!!!!!! Ouverture des fichier et definition des variable de sortie !!!!!!!!
23	!! histbeg, histvert et histdef
24	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
25
26	SUBROUTINE phys_output_open(rlon,rlat,pim,tabij,ipt,jpt,plon,plat, &
27	jjmp1,nlevSTD,clevSTD,rlevSTD, dtime, ok_veget, &
28	type_ocean, iflag_pbl,iflag_pbl_split,ok_mensuel,ok_journe, &
29	ok_hf,ok_instan,ok_LES,ok_ade,ok_aie, read_climoz, &
30	phys_out_filestations, &
31	aerosol_couple, flag_aerosol_strat, &
32	pdtphys, paprs, pphis, pplay, lmax_th, ptconv, ptconvth, ivap, &
33	d_u, d_t, qx, d_qx, zmasse, ok_sync)
34
35	USE iophy
36	USE dimphy
37	USE infotrac_phy, ONLY: nqtot, tracers, type_trac, niso, ntraciso=>ntiso
38	USE strings_mod, ONLY: maxlen
39	USE ioipsl
40	USE phys_cal_mod, only : hour, calend
41	USE mod_phys_lmdz_para
42	!Martin
43	USE surface_data, ONLY : landice_opt
44	USE phys_output_ctrlout_mod
45	USE mod_grid_phy_lmdz, only: klon_glo,nbp_lon,nbp_lat
46	USE print_control_mod, ONLY: prt_level,lunout
47	USE vertical_layers_mod, ONLY: ap,bp,preff,presnivs, aps, bps, pseudoalt
48	USE time_phylmdz_mod, ONLY: day_ini, itau_phy, start_time, annee_ref, day_ref
49	#ifdef CPP_XIOS
50	! ug Pour les sorties XIOS
51	USE wxios
52	#endif
53	#ifdef ISO
54	USE isotopes_mod, ONLY: striso,iso_HTO
55	#ifdef ISOTRAC
56	use isotrac_mod, only: index_zone,index_iso,strtrac
57	#endif
58	#endif
59
60	IMPLICIT NONE
61	include "clesphys.h"
62	include "alpale.h"
63	include "YOMCST.h"
64
65	! ug Nouveaux arguments n\'ecessaires au histwrite_mod:
66	INTEGER, INTENT(IN) :: ivap
67	INTEGER, DIMENSION(klon), INTENT(IN) :: lmax_th
68	LOGICAL, INTENT(IN) :: ok_sync
69	LOGICAL, DIMENSION(klon, klev), INTENT(IN) :: ptconv, ptconvth
70	REAL, INTENT(IN) :: pdtphys
71	REAL, DIMENSION(klon), INTENT(IN) :: pphis
72	REAL, DIMENSION(klon, klev), INTENT(IN) :: pplay, d_u, d_t
73	REAL, DIMENSION(klon, klev+1), INTENT(IN) :: paprs
74	REAL, DIMENSION(klon,klev,nqtot), INTENT(IN):: qx, d_qx
75	REAL, DIMENSION(klon, klev), INTENT(IN) :: zmasse
76
77
78	REAL,DIMENSION(klon),INTENT(IN) :: rlon
79	REAL,DIMENSION(klon),INTENT(IN) :: rlat
80	INTEGER, INTENT(IN) :: pim
81	INTEGER, DIMENSION(pim) :: tabij
82	INTEGER,DIMENSION(pim), INTENT(IN) :: ipt, jpt
83	REAL,DIMENSION(pim), INTENT(IN) :: plat, plon
84	REAL,DIMENSION(pim,2) :: plat_bounds, plon_bounds
85
86	INTEGER :: jjmp1
87	INTEGER :: nlevSTD, radpas
88	LOGICAL :: ok_mensuel, ok_journe, ok_hf, ok_instan
89	LOGICAL :: ok_LES,ok_ade,ok_aie
90	INTEGER :: flag_aerosol_strat
91	LOGICAL :: aerosol_couple
92	INTEGER, INTENT(IN):: read_climoz ! read ozone climatology
93	! Allowed values are 0, 1 and 2
94	! 0: do not read an ozone climatology
95	! 1: read a single ozone climatology that will be used day and night
96	! 2: read two ozone climatologies, the average day and night
97	! climatology and the daylight climatology
98
99	REAL :: dtime
100	INTEGER :: idayref
101	REAL :: zjulian_start, zjulian
102	CHARACTER(LEN=4), DIMENSION(nlevSTD) :: clevSTD
103	REAL, DIMENSION(nlevSTD) :: rlevSTD
104	INTEGER :: nsrf, k, iq, iff, i, j, ilev, itr, ixt, iiso, izone
105	INTEGER :: naero
106	LOGICAL :: ok_veget
107	INTEGER :: iflag_pbl
108	INTEGER :: iflag_pbl_split
109	CHARACTER(LEN=4) :: bb2
110	CHARACTER(LEN=2) :: bb3
111	CHARACTER(LEN=6) :: type_ocean
112	INTEGER, DIMENSION(nbp_lon*jjmp1) :: ndex2d
113	INTEGER, DIMENSION(nbp_lonjjmp1klev) :: ndex3d
114	INTEGER :: imin_ins, imax_ins
115	INTEGER :: jmin_ins, jmax_ins
116	INTEGER, DIMENSION(nfiles) :: phys_out_levmin, phys_out_levmax
117	INTEGER, DIMENSION(nfiles) :: phys_out_filelevels
118	CHARACTER(LEN=20), DIMENSION(nfiles) :: chtimestep = (/ 'Default', 'Default', 'Default', 'Default', 'Default', &
119	'Default', 'Default', 'Default', 'Default', 'Default' /)
120	LOGICAL, DIMENSION(nfiles) :: phys_out_filekeys
121	LOGICAL, DIMENSION(nfiles) :: phys_out_filestations
122
123	#ifdef ISO
124	CHARACTER(LEN=LEN(striso)) :: outiso
125	CHARACTER(LEN=20) :: unit
126	#endif
127	CHARACTER(LEN=maxlen) :: tnam, lnam, dn
128	INTEGER :: flag(nfiles)
129
130	!!!!!!!!!! stockage dans une region limitee pour chaque fichier !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
131	! entre [phys_out_lonmin,phys_out_lonmax] et [phys_out_latmin,phys_out_latmax]
132	LOGICAL, DIMENSION(nfiles), SAVE :: &
133	phys_out_regfkey = [.FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE.]
134	REAL, DIMENSION(nfiles), SAVE :: &
135	phys_out_lonmin = [ -180., -180., -180., -180., -180., -180., -180., -180., -180., -180.], &
136	phys_out_lonmax = [ 180., 180., 180., 180., 180., 180., 180., 180., 180., 180.], &
137	phys_out_latmin = [ -90., -90., -90., -90., -90., -90., -90., -90., -90., -90.], &
138	phys_out_latmax = [ 90., 90., 90., 90., 90., 90., 90., 90., 90., 90.]
139	REAL, DIMENSION(klev,2) :: Ahyb_bounds, Bhyb_bounds
140	REAL, DIMENSION(klev+1) :: lev_index
141
142	#ifdef CPP_XIOS
143	! ug Variables utilis\'ees pour r\'ecup\'erer le calendrier pour xios
144	INTEGER :: x_an, x_mois, x_jour
145	REAL :: x_heure
146	INTEGER :: ini_an, ini_mois, ini_jour
147	REAL :: ini_heure
148	#endif
149	INTEGER :: ISW
150	REAL, DIMENSION(NSW) :: wl1_sun, wl2_sun !wavelength bounds (in um) for SW
151	REAL, DIMENSION(NSW) :: wn1_sun, wn2_sun !wavenumber bounds (in m-1) for SW
152	REAL, DIMENSION(NSW) :: spectband !mean wavenumb. of each sp.band
153	REAL, DIMENSION(NSW,2) :: spbnds_sun !bounds of spectband
154
155	WRITE(lunout,*) 'Debut phys_output_mod.F90'
156	! Initialisations (Valeurs par defaut
157
158	DO ilev=1,klev
159	Ahyb_bounds(ilev,1) = ap(ilev)
160	Ahyb_bounds(ilev,2) = ap(ilev+1)
161	Bhyb_bounds(ilev,1) = bp(ilev)
162	Bhyb_bounds(ilev,2) = bp(ilev+1)
163	lev_index(ilev) = REAL(ilev)
164	END DO
165	lev_index(klev+1) = REAL(klev+1)
166
167	IF (.NOT. ALLOCATED(o_trac)) ALLOCATE(o_trac(nqtot))
168	IF (.NOT. ALLOCATED(o_trac_cum)) ALLOCATE(o_trac_cum(nqtot))
169	ALLOCATE(o_dtr_the(nqtot),o_dtr_con(nqtot),o_dtr_lessi_impa(nqtot))
170	ALLOCATE(o_dtr_lessi_nucl(nqtot),o_dtr_insc(nqtot),o_dtr_bcscav(nqtot))
171	ALLOCATE(o_dtr_evapls(nqtot),o_dtr_ls(nqtot),o_dtr_trsp(nqtot))
172	ALLOCATE(o_dtr_sscav(nqtot),o_dtr_sat(nqtot),o_dtr_uscav(nqtot))
173	ALLOCATE(o_dtr_dry(nqtot),o_dtr_vdf(nqtot))
174
175	#ifdef ISO
176	ALLOCATE(o_xtprecip(ntraciso))
177	ALLOCATE(o_xtplul(ntraciso))
178	ALLOCATE(o_xtpluc(ntraciso))
179	ALLOCATE(o_xtevap(ntraciso))
180	ALLOCATE(o_xtovap(ntraciso))
181	ALLOCATE(o_xtoliq(ntraciso))
182	ALLOCATE(o_xtcond(ntraciso))
183	ALLOCATE(o_dxtdyn(ntraciso))
184	ALLOCATE(o_dxtldyn(ntraciso))
185	ALLOCATE(o_dxtcon(ntraciso))
186	ALLOCATE(o_dxtlsc(ntraciso))
187	ALLOCATE(o_dxteva(ntraciso))
188	ALLOCATE(o_dxtajs(ntraciso))
189	ALLOCATE(o_dxtvdf(ntraciso))
190	ALLOCATE(o_dxtthe(ntraciso))
191	ALLOCATE(o_dxtch4(ntraciso))
192	if (iso_HTO.gt.0) then
193	ALLOCATE(o_dxtprod_nucl(ntraciso))
194	ALLOCATE(o_dxtcosmo(ntraciso))
195	ALLOCATE(o_dxtdecroiss(ntraciso))
196	endif
197	#endif
198
199	levmax = (/ klev, klev, klev, klev, klev, klev, nlevSTD, nlevSTD, nlevSTD, klev /)
200
201	phys_out_filenames(1) = 'histmth'
202	phys_out_filenames(2) = 'histday'
203	phys_out_filenames(3) = 'histhf6h'
204	phys_out_filenames(4) = 'histhf3h'
205	phys_out_filenames(5) = 'histhf3hm'
206	phys_out_filenames(6) = 'histstn'
207	phys_out_filenames(7) = 'histmthNMC'
208	phys_out_filenames(8) = 'histdayNMC'
209	phys_out_filenames(9) = 'histhfNMC'
210	phys_out_filenames(10)= 'histstrataer'
211
212	type_ecri(1) = 'ave(X)'
213	type_ecri(2) = 'ave(X)'
214	type_ecri(3) = 'inst(X)'
215	type_ecri(4) = 'inst(X)'
216	type_ecri(5) = 'ave(X)'
217	type_ecri(6) = 'inst(X)'
218	type_ecri(7) = 'inst(X)'
219	type_ecri(8) = 'inst(X)'
220	type_ecri(9) = 'inst(X)'
221	type_ecri(10)= 'ave(X)'
222
223	clef_files(1) = ok_mensuel
224	clef_files(2) = ok_journe
225	clef_files(3) = ok_hf
226	clef_files(4) = ok_instan
227	clef_files(5) = ok_LES
228	clef_files(6) = ok_instan
229	clef_files(7) = ok_histNMC(1)
230	clef_files(8) = ok_histNMC(2)
231	clef_files(9) = ok_histNMC(3)
232	#ifdef CPP_StratAer
233	clef_files(10)= .TRUE.
234	#else
235	clef_files(10)= .FALSE.
236	#endif
237
238	!sortir des fichiers "stations" si clef_stations(:)=.TRUE.
239	clef_stations(1) = .FALSE.
240	clef_stations(2) = .FALSE.
241	clef_stations(3) = .FALSE.
242	clef_stations(4) = .FALSE.
243	clef_stations(5) = .FALSE.
244	clef_stations(6) = .FALSE.
245	clef_stations(7) = .FALSE.
246	clef_stations(8) = .FALSE.
247	clef_stations(9) = .FALSE.
248	clef_stations(10)= .FALSE.
249
250	lev_files(1) = lev_histmth
251	lev_files(2) = lev_histday
252	lev_files(3) = lev_histhf
253	lev_files(4) = lev_histins
254	lev_files(5) = lev_histLES
255	lev_files(6) = lev_histins
256	lev_files(7) = levout_histNMC(1)
257	lev_files(8) = levout_histNMC(2)
258	lev_files(9) = levout_histNMC(3)
259	lev_files(10)= 5
260
261	ecrit_files(1) = ecrit_mth
262	ecrit_files(2) = ecrit_day
263	ecrit_files(3) = ecrit_hf
264	ecrit_files(4) = ecrit_ins
265	ecrit_files(5) = ecrit_LES
266	ecrit_files(6) = ecrit_ins
267	ecrit_files(7) = freq_outNMC(1)
268	ecrit_files(8) = freq_outNMC(2)
269	ecrit_files(9) = freq_outNMC(3)
270	ecrit_files(10)= ecrit_mth
271
272	!! Lectures des parametres de sorties dans physiq.def
273
274	CALL getin('phys_out_regfkey',phys_out_regfkey)
275	CALL getin('phys_out_lonmin',phys_out_lonmin)
276	CALL getin('phys_out_lonmax',phys_out_lonmax)
277	CALL getin('phys_out_latmin',phys_out_latmin)
278	CALL getin('phys_out_latmax',phys_out_latmax)
279	phys_out_levmin(:)=levmin(:)
280	CALL getin('phys_out_levmin',levmin)
281	phys_out_levmax(:)=levmax(:)
282	CALL getin('phys_out_levmax',levmax)
283	CALL getin('phys_out_filenames',phys_out_filenames)
284	phys_out_filekeys(:)=clef_files(:)
285	CALL getin('phys_out_filekeys',clef_files)
286	phys_out_filestations(:)=clef_stations(:)
287	CALL getin('phys_out_filestations',clef_stations)
288	phys_out_filelevels(:)=lev_files(:)
289	CALL getin('phys_out_filelevels',lev_files)
290	CALL getin('phys_out_filetimesteps',chtimestep)
291	phys_out_filetypes(:)=type_ecri(:)
292	CALL getin('phys_out_filetypes',type_ecri)
293
294	type_ecri_files(:)=type_ecri(:)
295
296	! if (ok_all_xml) phys_out_filelevels = 999
297
298	WRITE(lunout,*)'phys_out_lonmin=',phys_out_lonmin
299	WRITE(lunout,*)'phys_out_lonmax=',phys_out_lonmax
300	WRITE(lunout,*)'phys_out_latmin=',phys_out_latmin
301	WRITE(lunout,*)'phys_out_latmax=',phys_out_latmax
302	WRITE(lunout,*)'phys_out_filenames=',phys_out_filenames
303	WRITE(lunout,*)'phys_out_filetypes=',type_ecri
304	WRITE(lunout,*)'phys_out_filekeys=',clef_files
305	WRITE(lunout,*)'phys_out_filestations=',clef_stations
306	WRITE(lunout,*)'phys_out_filelevels=',lev_files
307	WRITE(lunout,*)'phys_out_regfkey=',phys_out_regfkey
308
309	! A noter pour
310	! l heure initiale - dans les fichiers histoire hist* - on met comme
311	! heure de debut soit la vraie heure (pour le 1D) soit 0h (pour le 3D)
312	! afin d avoir une seule sortie mensuelle par mois lorsque l on tourne
313	! par annee (IM).
314	!
315	idayref = day_ref
316	IF (klon_glo==1) THEN
317	! current_time (used to compute hour) is updated at the begining of
318	! the physics; to set the correct outputs "initial time" we thus
319	! have to use (hour-dtphys).
320	CALL ymds2ju(annee_ref, 1, idayref, hour-pdtphys, zjulian)
321	print *,'phys_output_mod: annee,iday,hour,zjulian=',annee_ref,idayref, hour, zjulian
322	ELSE
323	CALL ymds2ju(annee_ref, 1, idayref, 0.0, zjulian)
324	CALL ymds2ju(annee_ref, 1, day_ini, start_time*rday, zjulian_start)
325	ENDIF
326
327	#ifdef CPP_XIOS
328	! ug R\'eglage du calendrier xios
329	!Temps julian => an, mois, jour, heure
330	CALL ju2ymds(zjulian, x_an, x_mois, x_jour, x_heure)
331	CALL ju2ymds(zjulian_start, ini_an, ini_mois, ini_jour, ini_heure)
332	CALL wxios_set_cal(dtime, calend, x_an, x_mois, x_jour, x_heure, ini_an, &
333	ini_mois, ini_jour, ini_heure )
334	#endif
335
336	!!!!!!!!!!!!!!!!!!!!!!! Boucle sur les fichiers !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
337	! Appel de histbeg et histvert pour creer le fichier et les niveaux verticaux !!
338	! Appel des histbeg pour definir les variables (nom, moy ou inst, freq de sortie ..
339	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
340
341	zdtime_moy = dtime ! Frequence ou l on moyenne
342
343
344	ecrit_files(7) = ecrit_files(1)
345	ecrit_files(8) = ecrit_files(2)
346	ecrit_files(9) = ecrit_files(3)
347
348	DO iff=1,nfiles
349
350	! Calculate ecrit_files for all files
351	IF ( chtimestep(iff).eq.'Default' ) THEN
352	! Par defaut ecrit_files = (ecrit_mensuel ecrit_jour ecrit_hf
353	! ...)*86400.
354	ecrit_files(iff)=ecrit_files(iff)*86400.
355	ELSE IF (chtimestep(iff).eq.'-1') THEN
356	PRINT*,'ecrit_files(',iff,') < 0 so IOIPSL work on different'
357	PRINT*,'months length'
358	ecrit_files(iff)=-1.
359	ELSE
360	CALL convers_timesteps(chtimestep(iff),dtime,ecrit_files(iff))
361	ENDIF
362
363	WRITE(lunout,*)'ecrit_files(',iff,')= ',ecrit_files(iff)
364	zoutm(iff) = ecrit_files(iff) ! Frequence ou l on ecrit en seconde
365
366
367	#ifdef CPP_XIOS
368	!!! Ouverture de chaque fichier XIOS !!!!!!!!!!!
369	IF (.not. ok_all_xml) THEN
370	IF (prt_level >= 10) THEN
371	print*,'phys_output_open: call wxios_add_file with phys_out_filenames(iff)=',trim(phys_out_filenames(iff))
372	ENDIF
373	CALL wxios_add_file(phys_out_filenames(iff),chtimestep(iff),lev_files(iff))
374	ENDIF
375
376	!!! Declaration des axes verticaux de chaque fichier:
377	IF (prt_level >= 10) THEN
378	print*,'phys_output_open: Declare vertical axes for each file'
379	ENDIF
380
381	IF (iff.LE.6.OR.iff.EQ.10) THEN
382	CALL wxios_add_vaxis("presnivs", &
383	levmax(iff) - levmin(iff) + 1, presnivs(levmin(iff):levmax(iff)))
384	CALL wxios_add_vaxis("Ahyb", &
385	levmax(iff) - levmin(iff) + 1, aps(levmin(iff):levmax(iff)), positif='down', &
386	bnds=Ahyb_bounds(levmin(iff):levmax(iff),:))
387	CALL wxios_add_vaxis("Bhyb", &
388	levmax(iff) - levmin(iff) + 1, bps(levmin(iff):levmax(iff)), positif='down', &
389	bnds=Bhyb_bounds(levmin(iff):levmax(iff),:))
390	CALL wxios_add_vaxis("klev", levmax(iff) - levmin(iff) + 1, &
391	lev_index(levmin(iff):levmax(iff)))
392	CALL wxios_add_vaxis("klevp1", klev+1, &
393	lev_index(1:klev+1))
394	CALL wxios_add_vaxis("bnds", 2, (/1.,2./))
395
396	CALL wxios_add_vaxis("Alt", &
397	levmax(iff) - levmin(iff) + 1, pseudoalt)
398
399	! wl1_sun/wl2_sun: minimum/maximum bound of wavelength (in um)
400	SELECT CASE(NSW)
401	CASE(6)
402	wl1_sun(1:6) = [0.180, 0.250, 0.440, 0.690, 1.190, 2.380]
403	wl2_sun(1:6) = [0.250, 0.440, 0.690, 1.190, 2.380, 4.000]
404	CASE(2)
405	wl1_sun(1:2) = [0.250, 0.690]
406	wl2_sun(1:2) = [0.690, 4.000]
407	END SELECT
408
409	DO ISW=1, NSW
410	wn1_sun(ISW)=1.e+6/wl1_sun(ISW)
411	wn2_sun(ISW)=1.e+6/wl2_sun(ISW)
412	spbnds_sun(ISW,1)=wn2_sun(ISW)
413	spbnds_sun(ISW,2)=wn1_sun(ISW)
414	spectband(ISW)=(wn1_sun(ISW)+wn2_sun(ISW))/2
415	ENDDO
416	!
417	!!! ajout axe vertical spectband : solar band number
418	CALL wxios_add_vaxis("spectband", NSW, spectband, positif='down')
419	ELSE
420	! NMC files
421	CALL wxios_add_vaxis("plev", &
422	levmax(iff) - levmin(iff) + 1, rlevSTD(levmin(iff):levmax(iff)))
423	ENDIF
424	#endif
425
426	IF (clef_files(iff)) THEN
427	!!!!!!!!!!!!!!!!! Traitement dans le cas ou l'on veut stocker sur un domaine limite !!
428	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
429	IF (phys_out_regfkey(iff)) THEN
430	imin_ins=1
431	imax_ins=nbp_lon
432	jmin_ins=1
433	jmax_ins=jjmp1
434
435	! correction abderr
436	DO i=1,nbp_lon
437	WRITE(lunout,*)'io_lon(i)=',io_lon(i)
438	IF (io_lon(i).le.phys_out_lonmin(iff)) imin_ins=i
439	IF (io_lon(i).le.phys_out_lonmax(iff)) imax_ins=i+1
440	ENDDO
441
442	DO j=1,jjmp1
443	WRITE(lunout,*)'io_lat(j)=',io_lat(j)
444	IF (io_lat(j).ge.phys_out_latmin(iff)) jmax_ins=j+1
445	IF (io_lat(j).ge.phys_out_latmax(iff)) jmin_ins=j
446	ENDDO
447
448	WRITE(lunout,*)'On stoke le fichier histoire numero ',iff,' sur ', &
449	imin_ins,imax_ins,jmin_ins,jmax_ins
450	WRITE(lunout,*)'longitudes : ', &
451	io_lon(imin_ins),io_lon(imax_ins), &
452	'latitudes : ', &
453	io_lat(jmax_ins),io_lat(jmin_ins)
454
455	CALL histbeg(phys_out_filenames(iff),nbp_lon,io_lon,jjmp1,io_lat, &
456	imin_ins,imax_ins-imin_ins+1, &
457	jmin_ins,jmax_ins-jmin_ins+1, &
458	itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff))
459	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
460	!IM fichiers stations
461	ELSE IF (clef_stations(iff)) THEN
462
463	IF (prt_level >= 10) THEN
464	WRITE(lunout,*)'phys_output_open: iff=',iff,' phys_out_filenames(iff)=',phys_out_filenames(iff)
465	ENDIF
466
467	CALL histbeg_phy_all(rlon,rlat,pim,tabij,ipt,jpt,plon,plat,plon_bounds,plat_bounds, &
468	phys_out_filenames(iff), &
469	itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff))
470	ELSE
471
472	IF (prt_level >= 10) THEN
473	WRITE(lunout,*)'phys_output_open: iff=',iff,' phys_out_filenames(iff)=',phys_out_filenames(iff)
474	ENDIF
475
476	CALL histbeg_phy_all(phys_out_filenames(iff),itau_phy,zjulian,&
477	dtime,nhorim(iff),nid_files(iff))
478	ENDIF
479
480	#ifndef CPP_IOIPSL_NO_OUTPUT
481	IF (iff.LE.6.OR.iff.EQ.10) THEN
482	CALL histvert(nid_files(iff), "presnivs", "Vertical levels", "Pa", &
483	levmax(iff) - levmin(iff) + 1, &
484	presnivs(levmin(iff):levmax(iff)), nvertm(iff),"down")
485	!!!! Composantes de la coordonnee sigma-hybride
486	CALL histvert(nid_files(iff), "Ahyb","Ahyb comp of Hyb Cord ", "Pa", &
487	levmax(iff) - levmin(iff) + 1,aps,nvertap(iff))
488
489	CALL histvert(nid_files(iff), "Bhyb","Bhyb comp of Hyb Cord", " ", &
490	levmax(iff) - levmin(iff) + 1,bps,nvertbp(iff))
491
492	CALL histvert(nid_files(iff), "Alt","Height approx for scale heigh of 8km at levels", "Km", &
493	levmax(iff) - levmin(iff) + 1,pseudoalt,nvertAlt(iff))
494
495	ELSE
496	! NMC files
497	CALL histvert(nid_files(iff), "plev", "pressure", "Pa", &
498	levmax(iff) - levmin(iff) + 1, &
499	rlevSTD(levmin(iff):levmax(iff)), nvertm(iff), "down")
500	ENDIF
501	#endif
502
503	ENDIF ! clef_files
504
505	itr = 0
506	DO iq = 1, nqtot
507	IF(.NOT.(tracers(iq)%isAdvected .AND. tracers(iq)%isInPhysics)) CYCLE
508	itr = itr + 1
509	dn = 'd'//TRIM(tracers(iq)%name)//'_'
510
511	flag = [1, 5, 5, 5, 10, 10, 11, 11, 11, 11]
512	lnam = 'Tracer '//TRIM(tracers(iq)%longName)
513	tnam = TRIM(tracers(iq)%name); o_trac (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
514
515	flag = [4, 7, 7, 7, 10, 10, 11, 11, 11, 11]
516	lnam = 'Tendance tracer '//TRIM(tracers(iq)%longName)
517	tnam = TRIM(dn)//'vdf'; o_dtr_vdf (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
518
519	flag = [5, 7, 7, 7, 10, 10, 11, 11, 11, 11]
520	tnam = TRIM(dn)//'the'; o_dtr_the (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
521	tnam = TRIM(dn)//'con'; o_dtr_con (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
522
523	flag = [7, 7, 7, 7, 10, 10, 11, 11, 11, 11]
524	tnam = TRIM(dn)//'lessi_impa'; o_dtr_lessi_impa(itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
525	tnam = TRIM(dn)//'lessi_nucl'; o_dtr_lessi_nucl(itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
526	tnam = TRIM(dn)//'insc'; o_dtr_insc (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
527	tnam = TRIM(dn)//'bcscav'; o_dtr_bcscav (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
528	tnam = TRIM(dn)//'evapls'; o_dtr_evapls (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
529	tnam = TRIM(dn)//'ls'; o_dtr_ls (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
530	tnam = TRIM(dn)//'trsp'; o_dtr_trsp (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
531	tnam = TRIM(dn)//'sscav'; o_dtr_sscav (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
532	tnam = TRIM(dn)//'sat'; o_dtr_sat (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
533	tnam = TRIM(dn)//'uscav'; o_dtr_uscav (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
534
535	lnam = 'tracer tendency dry deposition'//TRIM(tracers(iq)%longName)
536	tnam = 'cum'//TRIM(dn)//'dry'; o_dtr_dry (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
537
538	flag = [1, 4, 10, 10, 10, 10, 11, 11, 11, 11]
539	lnam = 'Cumulated tracer '//TRIM(tracers(iq)%longName)
540	tnam = 'cum'//TRIM(tracers(iq)%name); o_trac_cum(itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
541	ENDDO
542
543	ENDDO ! iff
544
545	#ifdef ISO
546	write(,) 'phys_output_mid 589'
547	do ixt=1,ntraciso
548	if (ixt <= niso) then
549	outiso=striso(ixt)
550	else
551	#ifdef ISOTRAC
552	iiso=index_iso(ixt)
553	izone=index_zone(ixt)
554	outiso=striso(iiso)//strtrac(izone)
555	#else
556	write(,) 'phys_output_mod 546: ixt,ntraciso=', ixt,ntraciso
557	stop
558	#endif
559	endif
560
561	flag = [1, 1, 1, 10, 5, 10, 11, 11, 11, 11]; unit = 'kg/(s*m2)'
562	o_xtprecip(ixt)=ctrl_out(flag, 'precip'//TRIM(outiso), 'Precip Totale liq+sol', unit, [('',i=1,nfiles)])
563	o_xtpluc (ixt)=ctrl_out(flag, 'pluc'//TRIM(outiso), 'Convective Precip.', unit, [('',i=1,nfiles)])
564
565	flag = [1, 1, 1, 10, 10, 10, 11, 11, 11, 11]
566	o_xtplul (ixt)=ctrl_out(flag, 'plul'//TRIM(outiso), 'Large-scale Precip.', unit, [('',i=1,nfiles)])
567	o_xtevap (ixt)=ctrl_out(flag, 'evap'//TRIM(outiso), 'Evaporat.', unit, [('',i=1,nfiles)])
568
569	flag = [2, 3, 4, 10, 10, 10, 11, 11, 11, 11]; unit = 'kg/kg'
570	o_xtovap (ixt)=ctrl_out(flag, 'ovap'//TRIM(outiso), 'Specific humidity', unit, [('',i=1,nfiles)])
571	o_xtoliq (ixt)=ctrl_out(flag, 'oliq'//TRIM(outiso), 'Liquid water', unit, [('',i=1,nfiles)])
572	o_xtcond (ixt)=ctrl_out(flag, 'ocond'//TRIM(outiso), 'Condensed water', unit, [('',i=1,nfiles)])
573
574	flag = [4, 10, 10, 10, 10, 10, 11, 11, 11, 11]; unit = '(kg/kg)/s'
575	o_dxtdyn (ixt)=ctrl_out(flag, 'dqdyn'//TRIM(outiso), 'Dynamics dQ', unit, [('',i=1,nfiles)])
576	o_dxtldyn (ixt)=ctrl_out(flag, 'dqldyn'//TRIM(outiso), 'Dynamics dQL', unit, [('',i=1,nfiles)])
577	o_dxtcon (ixt)=ctrl_out(flag, 'dqcon'//TRIM(outiso), 'Convection dQ', unit, [('',i=1,nfiles)])
578	o_dxteva (ixt)=ctrl_out(flag, 'dqeva'//TRIM(outiso), 'Reevaporation dQ', unit, [('',i=1,nfiles)])
579	o_dxtlsc (ixt)=ctrl_out(flag, 'dqlsc'//TRIM(outiso), 'Condensation dQ', unit, [('',i=1,nfiles)])
580	o_dxtajs (ixt)=ctrl_out(flag, 'dqajs'//TRIM(outiso), 'Dry adjust. dQ', unit, [('',i=1,nfiles)])
581	o_dxtvdf (ixt)=ctrl_out(flag, 'dqvdf'//TRIM(outiso), 'Boundary-layer dQ', unit, [('',i=1,nfiles)])
582	o_dxtthe (ixt)=ctrl_out(flag, 'dqthe'//TRIM(outiso), 'Thermal dQ', unit, [('',i=1,nfiles)])
583
584	IF(ok_qch4) o_dxtch4(ixt)=ctrl_out(flag, 'dqch4'//TRIM(outiso), 'H2O due to CH4 oxidation & photolysis', &
585	unit, [('',i=1,nfiles)])
586	IF(ixt == iso_HTO) THEN
587	o_dxtprod_nucl(ixt)=ctrl_out(flag, 'dqprodnucl'//TRIM(outiso), 'dHTO/dt due to nuclear production', &
588	unit, [('',i=1,nfiles)])
589	o_dxtcosmo (ixt)=ctrl_out(flag, 'dqcosmo'//TRIM(outiso), 'dHTO/dt due to cosmogenic production', &
590	unit, [('',i=1,nfiles)])
591	o_dxtdecroiss (ixt)=ctrl_out(flag, 'dqdecroiss'//TRIM(outiso), 'dHTO/dt due to radiative destruction', &
592	unit, [('',i=1,nfiles)])
593	END IF
594	enddo !do ixt=1,niso
595	write(,) 'phys_output_mid 596'
596	#endif
597
598
599	! Updated write frequencies due to phys_out_filetimesteps.
600	! Write frequencies are now in seconds.
601	ecrit_mth = ecrit_files(1)
602	ecrit_day = ecrit_files(2)
603	ecrit_hf = ecrit_files(3)
604	ecrit_ins = ecrit_files(4)
605	ecrit_LES = ecrit_files(5)
606	ecrit_ins = ecrit_files(6)
607
608	IF (prt_level >= 10) THEN
609	WRITE(lunout,*)'swaerofree_diag=',swaerofree_diag
610	WRITE(lunout,*)'swaero_diag=',swaero_diag
611	WRITE(lunout,*)'dryaod_diag=',dryaod_diag
612	WRITE(lunout,*)'ok_4xCO2atm=',ok_4xCO2atm
613	WRITE(lunout,*)'phys_output_open: ends here'
614	ENDIF
615
616	END SUBROUTINE phys_output_open
617
618	SUBROUTINE convers_timesteps(str,dtime,timestep)
619
620	use ioipsl
621	USE phys_cal_mod
622	USE time_phylmdz_mod, ONLY: day_ref, annee_ref
623	USE print_control_mod, ONLY: lunout
624
625	IMPLICIT NONE
626
627	CHARACTER(LEN=20) :: str
628	CHARACTER(LEN=10) :: type
629	INTEGER :: ipos,il
630	real :: ttt,xxx,timestep,dayseconde,dtime
631	parameter (dayseconde=86400.)
632
633	ipos=scan(str,'0123456789.',.TRUE.)
634	!
635	il=len_trim(str)
636	WRITE(lunout,*) "ipos = ", ipos
637	WRITE(lunout,*) "il = ", il
638	IF (ipos == 0) CALL abort_physic("convers_timesteps", "bad str", 1)
639	read(str(1:ipos),*) ttt
640	WRITE(lunout,*)ttt
641	type=str(ipos+1:il)
642
643	IF ( il == ipos ) THEN
644	type='day'
645	ENDIF
646
647	IF ( type == 'day'.or.type == 'days'.or.type == 'jours'.or.type == 'jour' ) timestep = ttt * dayseconde
648	IF ( type == 'mounths'.or.type == 'mth'.or.type == 'mois' ) THEN
649	WRITE(lunout,*)'annee_ref,day_ref mon_len',annee_ref,day_ref,mth_len
650	timestep = ttt * dayseconde * mth_len
651	ENDIF
652	IF ( type == 'hours'.or.type == 'hr'.or.type == 'heurs') timestep = ttt * dayseconde / 24.
653	IF ( type == 'mn'.or.type == 'minutes' ) timestep = ttt * 60.
654	IF ( type == 's'.or.type == 'sec'.or.type == 'secondes' ) timestep = ttt
655	IF ( type == 'TS' ) timestep = ttt * dtime
656
657	WRITE(lunout,*)'type = ',type
658	WRITE(lunout,*)'nb j/h/m = ',ttt
659	WRITE(lunout,*)'timestep(s)=',timestep
660
661	END SUBROUTINE convers_timesteps
662
663	END MODULE phys_output_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format