Context Navigation

phys_output_mod.F90 @ 3927

Last change on this file since 3927 was 3927, checked in by Laurent Fairhead, 3 years ago
Initial import of the physics wih isotopes from Camille Risi CR
File size: 32.1 KB

Line
1	! $Id: phys_output_mod.F90 3666 2020-04-20 10:13:34Z lfalletti $
2	!
3
4	MODULE phys_output_mod
5	USE indice_sol_mod
6	USE phys_output_var_mod
7	USE phys_output_write_mod, ONLY : phys_output_write
8	REAL, DIMENSION(nfiles),SAVE :: ecrit_files
9
10	! Abderrahmane 12 2007
11	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
12	!!! Ecreture des Sorties du modele dans les fichiers Netcdf :
13	! histmth.nc : moyennes mensuelles
14	! histday.nc : moyennes journalieres
15	! histhf.nc : moyennes toutes les 3 heures
16	! histins.nc : valeurs instantanees
17	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
18
19	CONTAINS
20
21	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
22	!!!!!!!!! Ouverture des fichier et definition des variable de sortie !!!!!!!!
23	!! histbeg, histvert et histdef
24	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
25
26	SUBROUTINE phys_output_open(rlon,rlat,pim,tabij,ipt,jpt,plon,plat, &
27	jjmp1,nlevSTD,clevSTD,rlevSTD, dtime, ok_veget, &
28	type_ocean, iflag_pbl,iflag_pbl_split,ok_mensuel,ok_journe, &
29	ok_hf,ok_instan,ok_LES,ok_ade,ok_aie, read_climoz, &
30	phys_out_filestations, &
31	aerosol_couple, flag_aerosol_strat, &
32	pdtphys, paprs, pphis, pplay, lmax_th, ptconv, ptconvth, ivap, &
33	d_u, d_t, qx, d_qx, zmasse, ok_sync)
34
35	USE iophy
36	USE dimphy
37	USE infotrac_phy, ONLY: nqtot, nqo, niadv, tname, ttext, type_trac, &
38	nqtottr,itr_indice ! C Risi
39	USE ioipsl
40	USE phys_cal_mod, only : hour, calend
41	USE mod_phys_lmdz_para
42	!Martin
43	USE surface_data, ONLY : ok_snow
44	USE phys_output_ctrlout_mod
45	USE mod_grid_phy_lmdz, only: klon_glo,nbp_lon,nbp_lat
46	USE print_control_mod, ONLY: prt_level,lunout
47	USE vertical_layers_mod, ONLY: ap,bp,preff,presnivs, aps, bps, pseudoalt
48	USE time_phylmdz_mod, ONLY: day_ini, itau_phy, start_time, annee_ref, day_ref
49	#ifdef CPP_XIOS
50	! ug Pour les sorties XIOS
51	USE wxios
52	#endif
53	#ifdef ISO
54	USE infotrac_phy,ONLY: niso, ntraciso
55	USE isotopes_mod, ONLY: striso,iso_HTO
56	#ifdef ISOTRAC
57	use isotrac_mod, only: index_zone,index_iso,strtrac
58	#endif
59	#endif
60
61	IMPLICIT NONE
62	include "clesphys.h"
63	include "thermcell.h"
64	include "YOMCST.h"
65
66	! ug Nouveaux arguments n\'ecessaires au histwrite_mod:
67	INTEGER, INTENT(IN) :: ivap
68	INTEGER, DIMENSION(klon), INTENT(IN) :: lmax_th
69	LOGICAL, INTENT(IN) :: ok_sync
70	LOGICAL, DIMENSION(klon, klev), INTENT(IN) :: ptconv, ptconvth
71	REAL, INTENT(IN) :: pdtphys
72	REAL, DIMENSION(klon), INTENT(IN) :: pphis
73	REAL, DIMENSION(klon, klev), INTENT(IN) :: pplay, d_u, d_t
74	REAL, DIMENSION(klon, klev+1), INTENT(IN) :: paprs
75	REAL, DIMENSION(klon,klev,nqtot), INTENT(IN):: qx, d_qx
76	REAL, DIMENSION(klon, klev), INTENT(IN) :: zmasse
77
78
79	REAL,DIMENSION(klon),INTENT(IN) :: rlon
80	REAL,DIMENSION(klon),INTENT(IN) :: rlat
81	INTEGER, INTENT(IN) :: pim
82	INTEGER, DIMENSION(pim) :: tabij
83	INTEGER,DIMENSION(pim), INTENT(IN) :: ipt, jpt
84	REAL,DIMENSION(pim), INTENT(IN) :: plat, plon
85	REAL,DIMENSION(pim,2) :: plat_bounds, plon_bounds
86
87	INTEGER :: jjmp1
88	INTEGER :: nlevSTD, radpas
89	LOGICAL :: ok_mensuel, ok_journe, ok_hf, ok_instan
90	LOGICAL :: ok_LES,ok_ade,ok_aie
91	INTEGER :: flag_aerosol_strat
92	LOGICAL :: aerosol_couple
93	INTEGER, INTENT(IN):: read_climoz ! read ozone climatology
94	! Allowed values are 0, 1 and 2
95	! 0: do not read an ozone climatology
96	! 1: read a single ozone climatology that will be used day and night
97	! 2: read two ozone climatologies, the average day and night
98	! climatology and the daylight climatology
99
100	REAL :: dtime
101	INTEGER :: idayref
102	REAL :: zjulian_start, zjulian
103	CHARACTER(LEN=4), DIMENSION(nlevSTD) :: clevSTD
104	REAL, DIMENSION(nlevSTD) :: rlevSTD
105	INTEGER :: nsrf, k, iq, iiq, iff, i, j, ilev
106	INTEGER :: itr ! C Risi
107	INTEGER :: naero
108	LOGICAL :: ok_veget
109	INTEGER :: iflag_pbl
110	INTEGER :: iflag_pbl_split
111	CHARACTER(LEN=4) :: bb2
112	CHARACTER(LEN=2) :: bb3
113	CHARACTER(LEN=6) :: type_ocean
114	INTEGER, DIMENSION(nbp_lon*jjmp1) :: ndex2d
115	INTEGER, DIMENSION(nbp_lonjjmp1klev) :: ndex3d
116	INTEGER :: imin_ins, imax_ins
117	INTEGER :: jmin_ins, jmax_ins
118	INTEGER, DIMENSION(nfiles) :: phys_out_levmin, phys_out_levmax
119	INTEGER, DIMENSION(nfiles) :: phys_out_filelevels
120	CHARACTER(LEN=20), DIMENSION(nfiles) :: chtimestep = (/ 'Default', 'Default', 'Default', 'Default', 'Default', &
121	'Default', 'Default', 'Default', 'Default', 'Default' /)
122	LOGICAL, DIMENSION(nfiles) :: phys_out_filekeys
123	LOGICAL, DIMENSION(nfiles) :: phys_out_filestations
124
125	#ifdef ISO
126	INTEGER :: ixt,iiso,izone
127	CHARACTER*50 :: striso_sortie
128	integer :: lnblnk
129	#endif
130
131	!!!!!!!!!! stockage dans une region limitee pour chaque fichier !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
132	! entre [phys_out_lonmin,phys_out_lonmax] et [phys_out_latmin,phys_out_latmax]
133
134	LOGICAL, DIMENSION(nfiles), SAVE :: phys_out_regfkey = (/ .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., &
135	.FALSE., .FALSE., .FALSE., .FALSE., .FALSE. /)
136	REAL, DIMENSION(nfiles), SAVE :: phys_out_lonmin = (/ -180., -180., -180., -180., -180., &
137	-180., -180., -180., -180., -180. /)
138	REAL, DIMENSION(nfiles), SAVE :: phys_out_lonmax = (/ 180., 180., 180., 180., 180., &
139	180., 180., 180., 180., 180. /)
140	REAL, DIMENSION(nfiles), SAVE :: phys_out_latmin = (/ -90., -90., -90., -90., -90., &
141	-90., -90., -90., -90., -90. /)
142	REAL, DIMENSION(nfiles), SAVE :: phys_out_latmax = (/ 90., 90., 90., 90., 90., &
143	90., 90., 90., 90., 90. /)
144	REAL, DIMENSION(klev,2) :: Ahyb_bounds, Bhyb_bounds
145	REAL, DIMENSION(klev+1) :: lev_index
146
147	#ifdef CPP_XIOS
148	! ug Variables utilis\'ees pour r\'ecup\'erer le calendrier pour xios
149	INTEGER :: x_an, x_mois, x_jour
150	REAL :: x_heure
151	INTEGER :: ini_an, ini_mois, ini_jour
152	REAL :: ini_heure
153	#endif
154	INTEGER :: ISW
155	REAL, DIMENSION(NSW) :: wl1_sun, wl2_sun !wavelength bounds (in um) for SW
156	REAL, DIMENSION(NSW) :: wn1_sun, wn2_sun !wavenumber bounds (in m-1) for SW
157	REAL, DIMENSION(NSW) :: spectband !mean wavenumb. of each sp.band
158	REAL, DIMENSION(NSW,2) :: spbnds_sun !bounds of spectband
159
160	WRITE(lunout,*) 'Debut phys_output_mod.F90'
161	! Initialisations (Valeurs par defaut
162
163	DO ilev=1,klev
164	Ahyb_bounds(ilev,1) = ap(ilev)
165	Ahyb_bounds(ilev,2) = ap(ilev+1)
166	Bhyb_bounds(ilev,1) = bp(ilev)
167	Bhyb_bounds(ilev,2) = bp(ilev+1)
168	lev_index(ilev) = REAL(ilev)
169	END DO
170	lev_index(klev+1) = REAL(klev+1)
171
172	IF (.NOT. ALLOCATED(o_trac)) ALLOCATE(o_trac(nqtot))
173	IF (.NOT. ALLOCATED(o_trac_cum)) ALLOCATE(o_trac_cum(nqtot))
174	ALLOCATE(o_dtr_the(nqtot),o_dtr_con(nqtot),o_dtr_lessi_impa(nqtot))
175	ALLOCATE(o_dtr_lessi_nucl(nqtot),o_dtr_insc(nqtot),o_dtr_bcscav(nqtot))
176	ALLOCATE(o_dtr_evapls(nqtot),o_dtr_ls(nqtot),o_dtr_trsp(nqtot))
177	ALLOCATE(o_dtr_sscav(nqtot),o_dtr_sat(nqtot),o_dtr_uscav(nqtot))
178	ALLOCATE(o_dtr_dry(nqtot),o_dtr_vdf(nqtot))
179
180	#ifdef ISO
181	ALLOCATE(o_xtprecip(ntraciso))
182	ALLOCATE(o_xtplul(ntraciso))
183	ALLOCATE(o_xtpluc(ntraciso))
184	ALLOCATE(o_xtevap(ntraciso))
185	ALLOCATE(o_xtovap(ntraciso))
186	ALLOCATE(o_xtoliq(ntraciso))
187	ALLOCATE(o_xtcond(ntraciso))
188	ALLOCATE(o_dxtdyn(ntraciso))
189	ALLOCATE(o_dxtldyn(ntraciso))
190	ALLOCATE(o_dxtcon(ntraciso))
191	ALLOCATE(o_dxtlsc(ntraciso))
192	ALLOCATE(o_dxteva(ntraciso))
193	ALLOCATE(o_dxtajs(ntraciso))
194	ALLOCATE(o_dxtvdf(ntraciso))
195	ALLOCATE(o_dxtthe(ntraciso))
196	ALLOCATE(o_dxtch4(ntraciso))
197	if (iso_HTO.gt.0) then
198	ALLOCATE(o_dxtprod_nucl(ntraciso))
199	ALLOCATE(o_dxtcosmo(ntraciso))
200	ALLOCATE(o_dxtdecroiss(ntraciso))
201	endif
202	#endif
203
204	levmax = (/ klev, klev, klev, klev, klev, klev, nlevSTD, nlevSTD, nlevSTD, klev /)
205
206	phys_out_filenames(1) = 'histmth'
207	phys_out_filenames(2) = 'histday'
208	phys_out_filenames(3) = 'histhf6h'
209	phys_out_filenames(4) = 'histhf3h'
210	phys_out_filenames(5) = 'histhf3hm'
211	phys_out_filenames(6) = 'histstn'
212	phys_out_filenames(7) = 'histmthNMC'
213	phys_out_filenames(8) = 'histdayNMC'
214	phys_out_filenames(9) = 'histhfNMC'
215	phys_out_filenames(10)= 'histstrataer'
216
217	type_ecri(1) = 'ave(X)'
218	type_ecri(2) = 'ave(X)'
219	type_ecri(3) = 'inst(X)'
220	type_ecri(4) = 'inst(X)'
221	type_ecri(5) = 'ave(X)'
222	type_ecri(6) = 'inst(X)'
223	type_ecri(7) = 'inst(X)'
224	type_ecri(8) = 'inst(X)'
225	type_ecri(9) = 'inst(X)'
226	type_ecri(10)= 'ave(X)'
227
228	clef_files(1) = ok_mensuel
229	clef_files(2) = ok_journe
230	clef_files(3) = ok_hf
231	clef_files(4) = ok_instan
232	clef_files(5) = ok_LES
233	clef_files(6) = ok_instan
234	clef_files(7) = ok_histNMC(1)
235	clef_files(8) = ok_histNMC(2)
236	clef_files(9) = ok_histNMC(3)
237	#ifdef CPP_StratAer
238	clef_files(10)= .TRUE.
239	#else
240	clef_files(10)= .FALSE.
241	#endif
242
243	!sortir des fichiers "stations" si clef_stations(:)=.TRUE.
244	clef_stations(1) = .FALSE.
245	clef_stations(2) = .FALSE.
246	clef_stations(3) = .FALSE.
247	clef_stations(4) = .FALSE.
248	clef_stations(5) = .FALSE.
249	clef_stations(6) = .FALSE.
250	clef_stations(7) = .FALSE.
251	clef_stations(8) = .FALSE.
252	clef_stations(9) = .FALSE.
253	clef_stations(10)= .FALSE.
254
255	lev_files(1) = lev_histmth
256	lev_files(2) = lev_histday
257	lev_files(3) = lev_histhf
258	lev_files(4) = lev_histins
259	lev_files(5) = lev_histLES
260	lev_files(6) = lev_histins
261	lev_files(7) = levout_histNMC(1)
262	lev_files(8) = levout_histNMC(2)
263	lev_files(9) = levout_histNMC(3)
264	lev_files(10)= 5
265
266	ecrit_files(1) = ecrit_mth
267	ecrit_files(2) = ecrit_day
268	ecrit_files(3) = ecrit_hf
269	ecrit_files(4) = ecrit_ins
270	ecrit_files(5) = ecrit_LES
271	ecrit_files(6) = ecrit_ins
272	ecrit_files(7) = freq_outNMC(1)
273	ecrit_files(8) = freq_outNMC(2)
274	ecrit_files(9) = freq_outNMC(3)
275	ecrit_files(10)= ecrit_mth
276
277	!! Lectures des parametres de sorties dans physiq.def
278
279	CALL getin('phys_out_regfkey',phys_out_regfkey)
280	CALL getin('phys_out_lonmin',phys_out_lonmin)
281	CALL getin('phys_out_lonmax',phys_out_lonmax)
282	CALL getin('phys_out_latmin',phys_out_latmin)
283	CALL getin('phys_out_latmax',phys_out_latmax)
284	phys_out_levmin(:)=levmin(:)
285	CALL getin('phys_out_levmin',levmin)
286	phys_out_levmax(:)=levmax(:)
287	CALL getin('phys_out_levmax',levmax)
288	CALL getin('phys_out_filenames',phys_out_filenames)
289	phys_out_filekeys(:)=clef_files(:)
290	CALL getin('phys_out_filekeys',clef_files)
291	phys_out_filestations(:)=clef_stations(:)
292	CALL getin('phys_out_filestations',clef_stations)
293	phys_out_filelevels(:)=lev_files(:)
294	CALL getin('phys_out_filelevels',lev_files)
295	CALL getin('phys_out_filetimesteps',chtimestep)
296	phys_out_filetypes(:)=type_ecri(:)
297	CALL getin('phys_out_filetypes',type_ecri)
298
299	type_ecri_files(:)=type_ecri(:)
300
301	! if (ok_all_xml) phys_out_filelevels = 999
302
303	WRITE(lunout,*)'phys_out_lonmin=',phys_out_lonmin
304	WRITE(lunout,*)'phys_out_lonmax=',phys_out_lonmax
305	WRITE(lunout,*)'phys_out_latmin=',phys_out_latmin
306	WRITE(lunout,*)'phys_out_latmax=',phys_out_latmax
307	WRITE(lunout,*)'phys_out_filenames=',phys_out_filenames
308	WRITE(lunout,*)'phys_out_filetypes=',type_ecri
309	WRITE(lunout,*)'phys_out_filekeys=',clef_files
310	WRITE(lunout,*)'phys_out_filestations=',clef_stations
311	WRITE(lunout,*)'phys_out_filelevels=',lev_files
312	WRITE(lunout,*)'phys_out_regfkey=',phys_out_regfkey
313
314	! A noter pour
315	! l heure initiale - dans les fichiers histoire hist* - on met comme
316	! heure de debut soit la vraie heure (pour le 1D) soit 0h (pour le 3D)
317	! afin d avoir une seule sortie mensuelle par mois lorsque l on tourne
318	! par annee (IM).
319	!
320	idayref = day_ref
321	IF (klon_glo==1) THEN
322	! current_time (used to compute hour) is updated at the begining of
323	! the physics; to set the correct outputs "initial time" we thus
324	! have to use (hour-dtphys).
325	CALL ymds2ju(annee_ref, 1, idayref, hour-pdtphys, zjulian)
326	print *,'phys_output_mod: annee,iday,hour,zjulian=',annee_ref,idayref, hour, zjulian
327	ELSE
328	CALL ymds2ju(annee_ref, 1, idayref, 0.0, zjulian)
329	CALL ymds2ju(annee_ref, 1, day_ini, start_time*rday, zjulian_start)
330	ENDIF
331
332	#ifdef CPP_XIOS
333	! ug R\'eglage du calendrier xios
334	!Temps julian => an, mois, jour, heure
335	CALL ju2ymds(zjulian, x_an, x_mois, x_jour, x_heure)
336	CALL ju2ymds(zjulian_start, ini_an, ini_mois, ini_jour, ini_heure)
337	CALL wxios_set_cal(dtime, calend, x_an, x_mois, x_jour, x_heure, ini_an, &
338	ini_mois, ini_jour, ini_heure )
339	#endif
340
341	!!!!!!!!!!!!!!!!!!!!!!! Boucle sur les fichiers !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
342	! Appel de histbeg et histvert pour creer le fichier et les niveaux verticaux !!
343	! Appel des histbeg pour definir les variables (nom, moy ou inst, freq de sortie ..
344	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
345
346	zdtime_moy = dtime ! Frequence ou l on moyenne
347
348
349	ecrit_files(7) = ecrit_files(1)
350	ecrit_files(8) = ecrit_files(2)
351	ecrit_files(9) = ecrit_files(3)
352
353	DO iff=1,nfiles
354
355	! Calculate ecrit_files for all files
356	IF ( chtimestep(iff).eq.'Default' ) THEN
357	! Par defaut ecrit_files = (ecrit_mensuel ecrit_jour ecrit_hf
358	! ...)*86400.
359	ecrit_files(iff)=ecrit_files(iff)*86400.
360	ELSE IF (chtimestep(iff).eq.'-1') THEN
361	PRINT*,'ecrit_files(',iff,') < 0 so IOIPSL work on different'
362	PRINT*,'months length'
363	ecrit_files(iff)=-1.
364	ELSE
365	CALL convers_timesteps(chtimestep(iff),dtime,ecrit_files(iff))
366	ENDIF
367
368	WRITE(lunout,*)'ecrit_files(',iff,')= ',ecrit_files(iff)
369	zoutm(iff) = ecrit_files(iff) ! Frequence ou l on ecrit en seconde
370
371
372	#ifdef CPP_XIOS
373	!!! Ouverture de chaque fichier XIOS !!!!!!!!!!!
374	IF (.not. ok_all_xml) THEN
375	IF (prt_level >= 10) THEN
376	print*,'phys_output_open: call wxios_add_file with phys_out_filenames(iff)=',trim(phys_out_filenames(iff))
377	ENDIF
378	CALL wxios_add_file(phys_out_filenames(iff),chtimestep(iff),lev_files(iff))
379	ENDIF
380
381	write(,) 'phys_output_mid 344'
382	!!! Declaration des axes verticaux de chaque fichier:
383	IF (prt_level >= 10) THEN
384	print*,'phys_output_open: Declare vertical axes for each file'
385	ENDIF
386
387	IF (iff.LE.6.OR.iff.EQ.10) THEN
388	CALL wxios_add_vaxis("presnivs", &
389	levmax(iff) - levmin(iff) + 1, presnivs(levmin(iff):levmax(iff)))
390	CALL wxios_add_vaxis("Ahyb", &
391	levmax(iff) - levmin(iff) + 1, aps(levmin(iff):levmax(iff)), positif='down', &
392	bnds=Ahyb_bounds(levmin(iff):levmax(iff),:))
393	CALL wxios_add_vaxis("Bhyb", &
394	levmax(iff) - levmin(iff) + 1, bps(levmin(iff):levmax(iff)), positif='down', &
395	bnds=Bhyb_bounds(levmin(iff):levmax(iff),:))
396	CALL wxios_add_vaxis("klev", levmax(iff) - levmin(iff) + 1, &
397	lev_index(levmin(iff):levmax(iff)))
398	CALL wxios_add_vaxis("klevp1", klev+1, &
399	lev_index(1:klev+1))
400	CALL wxios_add_vaxis("bnds", 2, (/1.,2./))
401
402	CALL wxios_add_vaxis("Alt", &
403	levmax(iff) - levmin(iff) + 1, pseudoalt)
404
405	IF (NSW.EQ.6) THEN
406	!
407	!wl1_sun: minimum bound of wavelength (in um)
408	!
409	wl1_sun(1)=0.180
410	wl1_sun(2)=0.250
411	wl1_sun(3)=0.440
412	wl1_sun(4)=0.690
413	wl1_sun(5)=1.190
414	wl1_sun(6)=2.380
415	!
416	!wl2_sun: maximum bound of wavelength (in um)
417	!
418	wl2_sun(1)=0.250
419	wl2_sun(2)=0.440
420	wl2_sun(3)=0.690
421	wl2_sun(4)=1.190
422	wl2_sun(5)=2.380
423	wl2_sun(6)=4.000
424	!
425	ELSE IF(NSW.EQ.2) THEN
426	!
427	!wl1_sun: minimum bound of wavelength (in um)
428	!
429	wl1_sun(1)=0.250
430	wl1_sun(2)=0.690
431	!
432	!wl2_sun: maximum bound of wavelength (in um)
433	!
434	wl2_sun(1)=0.690
435	wl2_sun(2)=4.000
436	ENDIF
437
438	DO ISW=1, NSW
439	wn1_sun(ISW)=1.e+6/wl1_sun(ISW)
440	wn2_sun(ISW)=1.e+6/wl2_sun(ISW)
441	spbnds_sun(ISW,1)=wn2_sun(ISW)
442	spbnds_sun(ISW,2)=wn1_sun(ISW)
443	spectband(ISW)=(wn1_sun(ISW)+wn2_sun(ISW))/2
444	ENDDO
445	!
446	!!! ajout axe vertical spectband : solar band number
447	CALL wxios_add_vaxis("spectband", NSW, spectband, positif='down')
448	ELSE
449	! NMC files
450	CALL wxios_add_vaxis("plev", &
451	levmax(iff) - levmin(iff) + 1, rlevSTD(levmin(iff):levmax(iff)))
452	ENDIF
453	#endif
454	write(,) 'phys_output_mid 416'
455
456	IF (clef_files(iff)) THEN
457	!!!!!!!!!!!!!!!!! Traitement dans le cas ou l'on veut stocker sur un domaine limite !!
458	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
459	IF (phys_out_regfkey(iff)) THEN
460	imin_ins=1
461	imax_ins=nbp_lon
462	jmin_ins=1
463	jmax_ins=jjmp1
464
465	! correction abderr
466	DO i=1,nbp_lon
467	WRITE(lunout,*)'io_lon(i)=',io_lon(i)
468	IF (io_lon(i).le.phys_out_lonmin(iff)) imin_ins=i
469	IF (io_lon(i).le.phys_out_lonmax(iff)) imax_ins=i+1
470	ENDDO
471
472	DO j=1,jjmp1
473	WRITE(lunout,*)'io_lat(j)=',io_lat(j)
474	IF (io_lat(j).ge.phys_out_latmin(iff)) jmax_ins=j+1
475	IF (io_lat(j).ge.phys_out_latmax(iff)) jmin_ins=j
476	ENDDO
477
478	WRITE(lunout,*)'On stoke le fichier histoire numero ',iff,' sur ', &
479	imin_ins,imax_ins,jmin_ins,jmax_ins
480	WRITE(lunout,*)'longitudes : ', &
481	io_lon(imin_ins),io_lon(imax_ins), &
482	'latitudes : ', &
483	io_lat(jmax_ins),io_lat(jmin_ins)
484
485	CALL histbeg(phys_out_filenames(iff),nbp_lon,io_lon,jjmp1,io_lat, &
486	imin_ins,imax_ins-imin_ins+1, &
487	jmin_ins,jmax_ins-jmin_ins+1, &
488	itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff))
489	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
490	!IM fichiers stations
491	ELSE IF (clef_stations(iff)) THEN
492
493	IF (prt_level >= 10) THEN
494	WRITE(lunout,*)'phys_output_open: iff=',iff,' phys_out_filenames(iff)=',phys_out_filenames(iff)
495	ENDIF
496
497	CALL histbeg_phy_all(rlon,rlat,pim,tabij,ipt,jpt,plon,plat,plon_bounds,plat_bounds, &
498	phys_out_filenames(iff), &
499	itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff))
500	ELSE
501
502	IF (prt_level >= 10) THEN
503	WRITE(lunout,*)'phys_output_open: iff=',iff,' phys_out_filenames(iff)=',phys_out_filenames(iff)
504	ENDIF
505
506	CALL histbeg_phy_all(phys_out_filenames(iff),itau_phy,zjulian,&
507	dtime,nhorim(iff),nid_files(iff))
508	ENDIF
509
510	#ifndef CPP_IOIPSL_NO_OUTPUT
511	IF (iff.LE.6.OR.iff.EQ.10) THEN
512	CALL histvert(nid_files(iff), "presnivs", "Vertical levels", "Pa", &
513	levmax(iff) - levmin(iff) + 1, &
514	presnivs(levmin(iff):levmax(iff)), nvertm(iff),"down")
515	!!!! Composantes de la coordonnee sigma-hybride
516	CALL histvert(nid_files(iff), "Ahyb","Ahyb comp of Hyb Cord ", "Pa", &
517	levmax(iff) - levmin(iff) + 1,aps,nvertap(iff))
518
519	CALL histvert(nid_files(iff), "Bhyb","Bhyb comp of Hyb Cord", " ", &
520	levmax(iff) - levmin(iff) + 1,bps,nvertbp(iff))
521
522	CALL histvert(nid_files(iff), "Alt","Height approx for scale heigh of 8km at levels", "Km", &
523	levmax(iff) - levmin(iff) + 1,pseudoalt,nvertAlt(iff))
524
525	ELSE
526	! NMC files
527	CALL histvert(nid_files(iff), "plev", "pressure", "Pa", &
528	levmax(iff) - levmin(iff) + 1, &
529	rlevSTD(levmin(iff):levmax(iff)), nvertm(iff), "down")
530	ENDIF
531	#endif
532
533	ENDIF ! clef_files
534
535	write(lunout,*) 'phys_output_mid 496: nqtottr=',nqtottr
536	write(lunout,*) 'itr_indice=',itr_indice
537	! IF (nqtot>=nqo+1) THEN
538	IF (nqtottr>=1) THEN
539	!
540	!DO iq=nqo+1,nqtot
541	! C Risi: on modifie la boucle
542	do itr=1,nqtottr ! C Risi
543	iq=itr_indice(itr) ! C Risi
544	write(,) 'phys_output_mid 503: itr=',itr
545
546	iiq=niadv(iq)
547	o_trac(itr) = ctrl_out((/ 1, 5, 5, 5, 10, 10, 11, 11, 11, 11 /), &
548	tname(iiq),'Tracer '//ttext(iiq), "-", &
549	(/ '', '', '', '', '', '', '', '', '', '' /))
550	o_dtr_vdf(itr) = ctrl_out((/ 4, 7, 7, 7, 10, 10, 11, 11, 11, 11 /), &
551	'd'//trim(tname(iq))//'_vdf', &
552	'Tendance tracer '//ttext(iiq), "-" , &
553	(/ '', '', '', '', '', '', '', '', '', '' /))
554
555	o_dtr_the(itr) = ctrl_out((/ 5, 7, 7, 7, 10, 10, 11, 11, 11, 11 /), &
556	'd'//trim(tname(iq))//'_the', &
557	'Tendance tracer '//ttext(iiq), "-", &
558	(/ '', '', '', '', '', '', '', '', '', '' /))
559
560	o_dtr_con(itr) = ctrl_out((/ 5, 7, 7, 7, 10, 10, 11, 11, 11, 11 /), &
561	'd'//trim(tname(iq))//'_con', &
562	'Tendance tracer '//ttext(iiq), "-", &
563	(/ '', '', '', '', '', '', '', '', '', '' /))
564
565	o_dtr_lessi_impa(itr) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11, 11 /), &
566	'd'//trim(tname(iq))//'_lessi_impa', &
567	'Tendance tracer '//ttext(iiq), "-", &
568	(/ '', '', '', '', '', '', '', '', '', '' /))
569
570	o_dtr_lessi_nucl(itr) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11, 11 /), &
571	'd'//trim(tname(iq))//'_lessi_nucl', &
572	'Tendance tracer '//ttext(iiq), "-", &
573	(/ '', '', '', '', '', '', '', '', '', '' /))
574
575	o_dtr_insc(itr) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11, 11 /), &
576	'd'//trim(tname(iq))//'_insc', &
577	'Tendance tracer '//ttext(iiq), "-", &
578	(/ '', '', '', '', '', '', '', '', '', '' /))
579
580	o_dtr_bcscav(itr) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11, 11 /), &
581	'd'//trim(tname(iq))//'_bcscav', &
582	'Tendance tracer '//ttext(iiq), "-", &
583	(/ '', '', '', '', '', '', '', '', '', '' /))
584
585	o_dtr_evapls(itr) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11, 11 /), &
586	'd'//trim(tname(iq))//'_evapls', &
587	'Tendance tracer '//ttext(iiq), "-", &
588	(/ '', '', '', '', '', '', '', '', '', '' /))
589
590	o_dtr_ls(itr) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11, 11 /), &
591	'd'//trim(tname(iq))//'_ls', &
592	'Tendance tracer '//ttext(iiq), "-", &
593	(/ '', '', '', '', '', '', '', '', '', '' /))
594
595	o_dtr_trsp(itr) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11, 11 /), &
596	'd'//trim(tname(iq))//'_trsp', &
597	'Tendance tracer '//ttext(iiq), "-", &
598	(/ '', '', '', '', '', '', '', '', '', '' /))
599
600	o_dtr_sscav(itr) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11, 11 /), &
601	'd'//trim(tname(iq))//'_sscav', &
602	'Tendance tracer '//ttext(iiq), "-", &
603	(/ '', '', '', '', '', '', '', '', '', '' /))
604
605	o_dtr_sat(itr) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11, 11 /), &
606	'd'//trim(tname(iq))//'_sat', &
607	'Tendance tracer '//ttext(iiq), "-", &
608	(/ '', '', '', '', '', '', '', '', '', '' /))
609
610	o_dtr_uscav(itr) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11, 11 /), &
611	'd'//trim(tname(iq))//'_uscav', &
612	'Tendance tracer '//ttext(iiq), "-", &
613	(/ '', '', '', '', '', '', '', '', '', '' /))
614
615	o_dtr_dry(itr) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11, 11 /), &
616	'cum'//'d'//trim(tname(iq))//'_dry', &
617	'tracer tendency dry deposition'//ttext(iiq), "-", &
618	(/ '', '', '', '', '', '', '', '', '', '' /))
619
620	o_trac_cum(itr) = ctrl_out((/ 1, 4, 10, 10, 10, 10, 11, 11, 11, 11 /), &
621	'cum'//tname(iiq),&
622	'Cumulated tracer '//ttext(iiq), "-", &
623	(/ '', '', '', '', '', '', '', '', '', '' /))
624	ENDDO
625	ENDIF
626
627	ENDDO ! iff
628
629	write(,) 'phys_output_mid 589'
630	#ifdef ISO
631	do ixt=1,ntraciso
632	if (ixt.le.niso) then
633	striso_sortie=striso(ixt)
634	else
635	#ifdef ISOTRAC
636	iiso=index_iso(ixt)
637	izone=index_zone(ixt)
638	striso_sortie=striso(iiso)//strtrac(izone)
639	#else
640	write(,) 'phys_output_mod 546: ixt,ntraciso=', ixt,ntraciso
641	stop
642	#endif
643	endif
644
645	o_xtprecip(ixt)=ctrl_out((/ 1, 1, 1, 10, 5, 10, 11, 11, 11, 11/), &
646	'precip'//striso_sortie(1:lnblnk(striso_sortie)), &
647	'Precip Totale liq+sol', 'kg/(s*m2)', (/ ('', i=1, 10) /))
648	o_xtplul(ixt) = ctrl_out((/ 1, 1, 1, 10, 10, 10, 11, 11, 11, 11/), &
649	'plul'//striso_sortie(1:lnblnk(striso_sortie)), &
650	'Large-scale Precip.', 'kg/(s*m2)', (/ ('', i=1, 10) /))
651	o_xtpluc(ixt) = ctrl_out((/ 1, 1, 1, 10, 5, 10, 11, 11, 11, 11/), &
652	'pluc'//striso_sortie(1:lnblnk(striso_sortie)), &
653	'Convective Precip.', 'kg/(s*m2)', (/ ('', i=1, 10) /))
654	o_xtevap(ixt) = ctrl_out((/ 1, 1, 10, 10, 10, 10, 11, 11, 11, 11/), &
655	'evap'//striso_sortie(1:lnblnk(striso_sortie)), &
656	'Evaporat', 'kg/(s*m2)', (/ ('', i=1, 10) /))
657	o_xtovap(ixt) = ctrl_out((/ 2, 3, 4, 10, 10, 10, 11, 11, 11, 11/), &
658	'ovap'//striso_sortie(1:lnblnk(striso_sortie)), &
659	'Specific humidity', 'kg/kg', (/ ('', i=1, 10) /))
660	o_xtoliq(ixt) = ctrl_out((/ 2, 3, 4, 10, 10, 10, 11, 11, 11, 11/), &
661	'oliq'//striso_sortie(1:lnblnk(striso_sortie)), &
662	'Liquid water', 'kg/kg', (/ ('', i=1, 10) /))
663	o_xtcond(ixt) = ctrl_out((/ 2, 3, 4, 10, 10, 10, 11, 11, 11, 11/), &
664	'ocond'//striso_sortie(1:lnblnk(striso_sortie)), &
665	'Condensed water', 'kg/kg', (/ ('', i=1, 10) /))
666	o_dxtdyn(ixt) = ctrl_out((/ 4, 10, 10, 10, 10, 10, 11, 11, 11, 11/), &
667	'dqdyn'//striso_sortie(1:lnblnk(striso_sortie)), &
668	'Dynamics dQ', '(kg/kg)/s', (/ ('', i=1, 10) /))
669	o_dxtldyn(ixt) = ctrl_out((/ 4, 10, 10, 10, 10, 10, 11, 11, 11, 11/), &
670	'dqldyn'//striso_sortie(1:lnblnk(striso_sortie)), &
671	'Dynamics dQL', '(kg/kg)/s', (/ ('', i=1, 10) /))
672	o_dxtcon(ixt) = ctrl_out((/ 4, 10, 10, 10, 10, 10, 11, 11, 11, 11/), &
673	'dqcon'//striso_sortie(1:lnblnk(striso_sortie)), &
674	'Convection dQ', '(kg/kg)/s', (/ ('', i=1, 10) /))
675	o_dxteva(ixt) = ctrl_out((/ 4, 10, 10, 10, 10, 10, 11, 11, 11, 11/), &
676	'dqeva'//striso_sortie(1:lnblnk(striso_sortie)), &
677	'Reevaporation dQ', '(kg/kg)/s', (/ ('', i=1, 10) /))
678	o_dxtlsc(ixt) = ctrl_out((/ 4, 10, 10, 10, 10, 10, 11, 11, 11, 11/), &
679	'dqlsc'//striso_sortie(1:lnblnk(striso_sortie)), &
680	'Condensation dQ', '(kg/kg)/s', (/ ('', i=1, 10) /))
681	o_dxtajs(ixt) = ctrl_out((/ 4, 10, 10, 10, 10, 10, 11, 11, 11, 11/), &
682	'dqajs'//striso_sortie(1:lnblnk(striso_sortie)), &
683	'Dry adjust. dQ', '(kg/kg)/s', (/ ('', i=1, 10) /))
684	o_dxtvdf(ixt) = ctrl_out((/ 4, 10, 10, 10, 10, 10, 11, 11, 11, 11/), &
685	'dqvdf'//striso_sortie(1:lnblnk(striso_sortie)), &
686	'Boundary-layer dQ', '(kg/kg)/s', (/ ('', i=1, 10) /))
687	o_dxtthe(ixt) = ctrl_out((/ 4, 10, 10, 10, 10, 10, 11, 11, 11, 11/), &
688	'dqthe'//striso_sortie(1:lnblnk(striso_sortie)), &
689	'Thermal dQ', '(kg/kg)/s', (/ ('', i=1, 10) /))
690
691	IF (ok_qch4) then
692	o_dxtch4(ixt) = ctrl_out((/ 4, 10, 10, 10, 10, 10, 11, 11, 11, 11/), &
693	'dqch4'//striso_sortie(1:lnblnk(striso_sortie)), &
694	'H2O due to CH4 oxidation & photolysis', '(kg/kg)/s', (/ ('', i=1, 10) /))
695	endif ! IF (ok_qch4) then
696
697	if (ixt.eq.iso_HTO) then
698	o_dxtprod_nucl(ixt) = ctrl_out((/ 4, 10, 10, 10, 10, 10, 11, 11, 11, 11/), &
699	'dqprodnucl'//striso_sortie(1:lnblnk(striso_sortie)), &
700	'dHTO/dt due to nuclear production', '(kg/kg)/s', (/ ('', i=1, 10) /))
701	o_dxtcosmo(ixt) = ctrl_out((/ 4, 10, 10, 10, 10, 10, 11, 11, 11, 11/), &
702	'dqcosmo'//striso_sortie(1:lnblnk(striso_sortie)), &
703	'dHTO/dt due to cosmogenic production', '(kg/kg)/s', (/ ('', i=1, 10) /))
704	o_dxtdecroiss(ixt) = ctrl_out((/ 4, 10, 10, 10, 10, 10, 11, 11, 11, 11/), &
705	'dqdecroiss'//striso_sortie(1:lnblnk(striso_sortie)), &
706	'dHTO/dt due to radiative destruction', '(kg/kg)/s', (/ ('', i=1, 10) /))
707	endif !if (ixt.eq.iso_HTO) then
708	enddo !do ixt=1,niso
709	#endif
710	write(,) 'phys_output_mid 596'
711
712
713	! Updated write frequencies due to phys_out_filetimesteps.
714	! Write frequencies are now in seconds.
715	ecrit_mth = ecrit_files(1)
716	ecrit_day = ecrit_files(2)
717	ecrit_hf = ecrit_files(3)
718	ecrit_ins = ecrit_files(4)
719	ecrit_LES = ecrit_files(5)
720	ecrit_ins = ecrit_files(6)
721
722	IF (prt_level >= 10) THEN
723	WRITE(lunout,*)'swaerofree_diag=',swaerofree_diag
724	WRITE(lunout,*)'swaero_diag=',swaero_diag
725	WRITE(lunout,*)'dryaod_diag=',dryaod_diag
726	WRITE(lunout,*)'ok_4xCO2atm=',ok_4xCO2atm
727	WRITE(lunout,*)'phys_output_open: ends here'
728	ENDIF
729
730	END SUBROUTINE phys_output_open
731
732	SUBROUTINE convers_timesteps(str,dtime,timestep)
733
734	use ioipsl
735	USE phys_cal_mod
736	USE time_phylmdz_mod, ONLY: day_ref, annee_ref
737	USE print_control_mod, ONLY: lunout
738
739	IMPLICIT NONE
740
741	CHARACTER(LEN=20) :: str
742	CHARACTER(LEN=10) :: type
743	INTEGER :: ipos,il
744	real :: ttt,xxx,timestep,dayseconde,dtime
745	parameter (dayseconde=86400.)
746
747	ipos=scan(str,'0123456789.',.TRUE.)
748	!
749	il=len_trim(str)
750	WRITE(lunout,*) "ipos = ", ipos
751	WRITE(lunout,*) "il = ", il
752	IF (ipos == 0) CALL abort_physic("convers_timesteps", "bad str", 1)
753	read(str(1:ipos),*) ttt
754	WRITE(lunout,*)ttt
755	type=str(ipos+1:il)
756
757	IF ( il == ipos ) THEN
758	type='day'
759	ENDIF
760
761	IF ( type == 'day'.or.type == 'days'.or.type == 'jours'.or.type == 'jour' ) timestep = ttt * dayseconde
762	IF ( type == 'mounths'.or.type == 'mth'.or.type == 'mois' ) THEN
763	WRITE(lunout,*)'annee_ref,day_ref mon_len',annee_ref,day_ref,mth_len
764	timestep = ttt * dayseconde * mth_len
765	ENDIF
766	IF ( type == 'hours'.or.type == 'hr'.or.type == 'heurs') timestep = ttt * dayseconde / 24.
767	IF ( type == 'mn'.or.type == 'minutes' ) timestep = ttt * 60.
768	IF ( type == 's'.or.type == 'sec'.or.type == 'secondes' ) timestep = ttt
769	IF ( type == 'TS' ) timestep = ttt * dtime
770
771	WRITE(lunout,*)'type = ',type
772	WRITE(lunout,*)'nb j/h/m = ',ttt
773	WRITE(lunout,*)'timestep(s)=',timestep
774
775	END SUBROUTINE convers_timesteps
776
777	END MODULE phys_output_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format