Context Navigation

phys_output_mod.F90 @ 4062

Last change on this file since 4062 was 4056, checked in by dcugnet, 3 years ago

Most of the changes are intended to help to eventually remove the constraints about the tracers assumptions, in particular water tracers.

Remove index tables itr_indice and niadv, replaced by tracers(:)%isAdvected and tracers(:)%isH2OFamily. Most of the loops are now from 1 to nqtot:
- DO iq=nqo+1,nqtot loops are replaced with: DO iq=1,nqtot

IF(tracers(iq)%isH2Ofamily) CYCLE

DO it=1,nbtr; iq=niadv(it+nqo)

and DO it=1,nqtottr; iq=itr_indice(it) loops are replaced with:

it = 0
DO iq = 1, nqtot

IF(.NOT.tracers(iq)%isAdvected .OR. tracers(iq)%isH2Ofamily) CYCLE
it = it+1

Move some StratAer? related code from infotrac to infotrac_phy
Remove "nqperes" variable:

DO iq=1,nqpere loops are replaced with:
DO iq=1,nqtot

IF(tracers(iq)%parent/='air') CYCLE

Cosmetic changes (justification, SELECT CASE instead of multiple IF...) mostly in advtrac* routines.

File size: 27.9 KB

Line
1	! $Id: phys_output_mod.F90 3792 2021-01-04 17:01:25Z evignon $
2	!
3
4	MODULE phys_output_mod
5	USE indice_sol_mod
6	USE phys_output_var_mod
7	USE phys_output_write_mod, ONLY : phys_output_write
8	REAL, DIMENSION(nfiles),SAVE :: ecrit_files
9
10	! Abderrahmane 12 2007
11	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
12	!!! Ecreture des Sorties du modele dans les fichiers Netcdf :
13	! histmth.nc : moyennes mensuelles
14	! histday.nc : moyennes journalieres
15	! histhf.nc : moyennes toutes les 3 heures
16	! histins.nc : valeurs instantanees
17	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
18
19	CONTAINS
20
21	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
22	!!!!!!!!! Ouverture des fichier et definition des variable de sortie !!!!!!!!
23	!! histbeg, histvert et histdef
24	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
25
26	SUBROUTINE phys_output_open(rlon,rlat,pim,tabij,ipt,jpt,plon,plat, &
27	jjmp1,nlevSTD,clevSTD,rlevSTD, dtime, ok_veget, &
28	type_ocean, iflag_pbl,iflag_pbl_split,ok_mensuel,ok_journe, &
29	ok_hf,ok_instan,ok_LES,ok_ade,ok_aie, read_climoz, &
30	phys_out_filestations, &
31	aerosol_couple, flag_aerosol_strat, &
32	pdtphys, paprs, pphis, pplay, lmax_th, ptconv, ptconvth, ivap, &
33	d_u, d_t, qx, d_qx, zmasse, ok_sync)
34
35	USE iophy
36	USE dimphy
37	USE infotrac_phy, ONLY: nqtot, tracers, type_trac, niso, ntraciso, maxlen
38	USE ioipsl
39	USE phys_cal_mod, only : hour, calend
40	USE mod_phys_lmdz_para
41	!Martin
42	USE surface_data, ONLY : landice_opt
43	USE phys_output_ctrlout_mod
44	USE mod_grid_phy_lmdz, only: klon_glo,nbp_lon,nbp_lat
45	USE print_control_mod, ONLY: prt_level,lunout
46	USE vertical_layers_mod, ONLY: ap,bp,preff,presnivs, aps, bps, pseudoalt
47	USE time_phylmdz_mod, ONLY: day_ini, itau_phy, start_time, annee_ref, day_ref
48	#ifdef CPP_XIOS
49	! ug Pour les sorties XIOS
50	USE wxios
51	#endif
52	#ifdef ISO
53	USE isotopes_mod, ONLY: striso,iso_HTO
54	#ifdef ISOTRAC
55	use isotrac_mod, only: index_zone,index_iso,strtrac
56	#endif
57	#endif
58
59	IMPLICIT NONE
60	include "clesphys.h"
61	include "thermcell.h"
62	include "YOMCST.h"
63
64	! ug Nouveaux arguments n\'ecessaires au histwrite_mod:
65	INTEGER, INTENT(IN) :: ivap
66	INTEGER, DIMENSION(klon), INTENT(IN) :: lmax_th
67	LOGICAL, INTENT(IN) :: ok_sync
68	LOGICAL, DIMENSION(klon, klev), INTENT(IN) :: ptconv, ptconvth
69	REAL, INTENT(IN) :: pdtphys
70	REAL, DIMENSION(klon), INTENT(IN) :: pphis
71	REAL, DIMENSION(klon, klev), INTENT(IN) :: pplay, d_u, d_t
72	REAL, DIMENSION(klon, klev+1), INTENT(IN) :: paprs
73	REAL, DIMENSION(klon,klev,nqtot), INTENT(IN):: qx, d_qx
74	REAL, DIMENSION(klon, klev), INTENT(IN) :: zmasse
75
76
77	REAL,DIMENSION(klon),INTENT(IN) :: rlon
78	REAL,DIMENSION(klon),INTENT(IN) :: rlat
79	INTEGER, INTENT(IN) :: pim
80	INTEGER, DIMENSION(pim) :: tabij
81	INTEGER,DIMENSION(pim), INTENT(IN) :: ipt, jpt
82	REAL,DIMENSION(pim), INTENT(IN) :: plat, plon
83	REAL,DIMENSION(pim,2) :: plat_bounds, plon_bounds
84
85	INTEGER :: jjmp1
86	INTEGER :: nlevSTD, radpas
87	LOGICAL :: ok_mensuel, ok_journe, ok_hf, ok_instan
88	LOGICAL :: ok_LES,ok_ade,ok_aie
89	INTEGER :: flag_aerosol_strat
90	LOGICAL :: aerosol_couple
91	INTEGER, INTENT(IN):: read_climoz ! read ozone climatology
92	! Allowed values are 0, 1 and 2
93	! 0: do not read an ozone climatology
94	! 1: read a single ozone climatology that will be used day and night
95	! 2: read two ozone climatologies, the average day and night
96	! climatology and the daylight climatology
97
98	REAL :: dtime
99	INTEGER :: idayref
100	REAL :: zjulian_start, zjulian
101	CHARACTER(LEN=4), DIMENSION(nlevSTD) :: clevSTD
102	REAL, DIMENSION(nlevSTD) :: rlevSTD
103	INTEGER :: nsrf, k, iq, iff, i, j, ilev, itr, ixt, iiso, izone
104	INTEGER :: naero
105	LOGICAL :: ok_veget
106	INTEGER :: iflag_pbl
107	INTEGER :: iflag_pbl_split
108	CHARACTER(LEN=4) :: bb2
109	CHARACTER(LEN=2) :: bb3
110	CHARACTER(LEN=6) :: type_ocean
111	INTEGER, DIMENSION(nbp_lon*jjmp1) :: ndex2d
112	INTEGER, DIMENSION(nbp_lonjjmp1klev) :: ndex3d
113	INTEGER :: imin_ins, imax_ins
114	INTEGER :: jmin_ins, jmax_ins
115	INTEGER, DIMENSION(nfiles) :: phys_out_levmin, phys_out_levmax
116	INTEGER, DIMENSION(nfiles) :: phys_out_filelevels
117	CHARACTER(LEN=20), DIMENSION(nfiles) :: chtimestep = (/ 'Default', 'Default', 'Default', 'Default', 'Default', &
118	'Default', 'Default', 'Default', 'Default', 'Default' /)
119	LOGICAL, DIMENSION(nfiles) :: phys_out_filekeys
120	LOGICAL, DIMENSION(nfiles) :: phys_out_filestations
121
122	#ifdef ISO
123	CHARACTER(LEN=LEN(striso)) :: outiso
124	CHARACTER(LEN=20) :: unit
125	#endif
126	CHARACTER(LEN=maxlen) :: tnam, lnam, dn
127	INTEGER :: flag(nfiles)
128
129	!!!!!!!!!! stockage dans une region limitee pour chaque fichier !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
130	! entre [phys_out_lonmin,phys_out_lonmax] et [phys_out_latmin,phys_out_latmax]
131	LOGICAL, DIMENSION(nfiles), SAVE :: &
132	phys_out_regfkey = [.FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE.]
133	REAL, DIMENSION(nfiles), SAVE :: &
134	phys_out_lonmin = [ -180., -180., -180., -180., -180., -180., -180., -180., -180., -180.], &
135	phys_out_lonmax = [ 180., 180., 180., 180., 180., 180., 180., 180., 180., 180.], &
136	phys_out_latmin = [ -90., -90., -90., -90., -90., -90., -90., -90., -90., -90.], &
137	phys_out_latmax = [ 90., 90., 90., 90., 90., 90., 90., 90., 90., 90.]
138	REAL, DIMENSION(klev,2) :: Ahyb_bounds, Bhyb_bounds
139	REAL, DIMENSION(klev+1) :: lev_index
140
141	#ifdef CPP_XIOS
142	! ug Variables utilis\'ees pour r\'ecup\'erer le calendrier pour xios
143	INTEGER :: x_an, x_mois, x_jour
144	REAL :: x_heure
145	INTEGER :: ini_an, ini_mois, ini_jour
146	REAL :: ini_heure
147	#endif
148	INTEGER :: ISW
149	REAL, DIMENSION(NSW) :: wl1_sun, wl2_sun !wavelength bounds (in um) for SW
150	REAL, DIMENSION(NSW) :: wn1_sun, wn2_sun !wavenumber bounds (in m-1) for SW
151	REAL, DIMENSION(NSW) :: spectband !mean wavenumb. of each sp.band
152	REAL, DIMENSION(NSW,2) :: spbnds_sun !bounds of spectband
153
154	WRITE(lunout,*) 'Debut phys_output_mod.F90'
155	! Initialisations (Valeurs par defaut
156
157	DO ilev=1,klev
158	Ahyb_bounds(ilev,1) = ap(ilev)
159	Ahyb_bounds(ilev,2) = ap(ilev+1)
160	Bhyb_bounds(ilev,1) = bp(ilev)
161	Bhyb_bounds(ilev,2) = bp(ilev+1)
162	lev_index(ilev) = REAL(ilev)
163	END DO
164	lev_index(klev+1) = REAL(klev+1)
165
166	IF (.NOT. ALLOCATED(o_trac)) ALLOCATE(o_trac(nqtot))
167	IF (.NOT. ALLOCATED(o_trac_cum)) ALLOCATE(o_trac_cum(nqtot))
168	ALLOCATE(o_dtr_the(nqtot),o_dtr_con(nqtot),o_dtr_lessi_impa(nqtot))
169	ALLOCATE(o_dtr_lessi_nucl(nqtot),o_dtr_insc(nqtot),o_dtr_bcscav(nqtot))
170	ALLOCATE(o_dtr_evapls(nqtot),o_dtr_ls(nqtot),o_dtr_trsp(nqtot))
171	ALLOCATE(o_dtr_sscav(nqtot),o_dtr_sat(nqtot),o_dtr_uscav(nqtot))
172	ALLOCATE(o_dtr_dry(nqtot),o_dtr_vdf(nqtot))
173
174	#ifdef ISO
175	ALLOCATE(o_xtprecip(ntraciso))
176	ALLOCATE(o_xtplul(ntraciso))
177	ALLOCATE(o_xtpluc(ntraciso))
178	ALLOCATE(o_xtevap(ntraciso))
179	ALLOCATE(o_xtovap(ntraciso))
180	ALLOCATE(o_xtoliq(ntraciso))
181	ALLOCATE(o_xtcond(ntraciso))
182	ALLOCATE(o_dxtdyn(ntraciso))
183	ALLOCATE(o_dxtldyn(ntraciso))
184	ALLOCATE(o_dxtcon(ntraciso))
185	ALLOCATE(o_dxtlsc(ntraciso))
186	ALLOCATE(o_dxteva(ntraciso))
187	ALLOCATE(o_dxtajs(ntraciso))
188	ALLOCATE(o_dxtvdf(ntraciso))
189	ALLOCATE(o_dxtthe(ntraciso))
190	ALLOCATE(o_dxtch4(ntraciso))
191	if (iso_HTO.gt.0) then
192	ALLOCATE(o_dxtprod_nucl(ntraciso))
193	ALLOCATE(o_dxtcosmo(ntraciso))
194	ALLOCATE(o_dxtdecroiss(ntraciso))
195	endif
196	#endif
197
198	levmax = (/ klev, klev, klev, klev, klev, klev, nlevSTD, nlevSTD, nlevSTD, klev /)
199
200	phys_out_filenames(1) = 'histmth'
201	phys_out_filenames(2) = 'histday'
202	phys_out_filenames(3) = 'histhf6h'
203	phys_out_filenames(4) = 'histhf3h'
204	phys_out_filenames(5) = 'histhf3hm'
205	phys_out_filenames(6) = 'histstn'
206	phys_out_filenames(7) = 'histmthNMC'
207	phys_out_filenames(8) = 'histdayNMC'
208	phys_out_filenames(9) = 'histhfNMC'
209	phys_out_filenames(10)= 'histstrataer'
210
211	type_ecri(1) = 'ave(X)'
212	type_ecri(2) = 'ave(X)'
213	type_ecri(3) = 'inst(X)'
214	type_ecri(4) = 'inst(X)'
215	type_ecri(5) = 'ave(X)'
216	type_ecri(6) = 'inst(X)'
217	type_ecri(7) = 'inst(X)'
218	type_ecri(8) = 'inst(X)'
219	type_ecri(9) = 'inst(X)'
220	type_ecri(10)= 'ave(X)'
221
222	clef_files(1) = ok_mensuel
223	clef_files(2) = ok_journe
224	clef_files(3) = ok_hf
225	clef_files(4) = ok_instan
226	clef_files(5) = ok_LES
227	clef_files(6) = ok_instan
228	clef_files(7) = ok_histNMC(1)
229	clef_files(8) = ok_histNMC(2)
230	clef_files(9) = ok_histNMC(3)
231	#ifdef CPP_StratAer
232	clef_files(10)= .TRUE.
233	#else
234	clef_files(10)= .FALSE.
235	#endif
236
237	!sortir des fichiers "stations" si clef_stations(:)=.TRUE.
238	clef_stations(1) = .FALSE.
239	clef_stations(2) = .FALSE.
240	clef_stations(3) = .FALSE.
241	clef_stations(4) = .FALSE.
242	clef_stations(5) = .FALSE.
243	clef_stations(6) = .FALSE.
244	clef_stations(7) = .FALSE.
245	clef_stations(8) = .FALSE.
246	clef_stations(9) = .FALSE.
247	clef_stations(10)= .FALSE.
248
249	lev_files(1) = lev_histmth
250	lev_files(2) = lev_histday
251	lev_files(3) = lev_histhf
252	lev_files(4) = lev_histins
253	lev_files(5) = lev_histLES
254	lev_files(6) = lev_histins
255	lev_files(7) = levout_histNMC(1)
256	lev_files(8) = levout_histNMC(2)
257	lev_files(9) = levout_histNMC(3)
258	lev_files(10)= 5
259
260	ecrit_files(1) = ecrit_mth
261	ecrit_files(2) = ecrit_day
262	ecrit_files(3) = ecrit_hf
263	ecrit_files(4) = ecrit_ins
264	ecrit_files(5) = ecrit_LES
265	ecrit_files(6) = ecrit_ins
266	ecrit_files(7) = freq_outNMC(1)
267	ecrit_files(8) = freq_outNMC(2)
268	ecrit_files(9) = freq_outNMC(3)
269	ecrit_files(10)= ecrit_mth
270
271	!! Lectures des parametres de sorties dans physiq.def
272
273	CALL getin('phys_out_regfkey',phys_out_regfkey)
274	CALL getin('phys_out_lonmin',phys_out_lonmin)
275	CALL getin('phys_out_lonmax',phys_out_lonmax)
276	CALL getin('phys_out_latmin',phys_out_latmin)
277	CALL getin('phys_out_latmax',phys_out_latmax)
278	phys_out_levmin(:)=levmin(:)
279	CALL getin('phys_out_levmin',levmin)
280	phys_out_levmax(:)=levmax(:)
281	CALL getin('phys_out_levmax',levmax)
282	CALL getin('phys_out_filenames',phys_out_filenames)
283	phys_out_filekeys(:)=clef_files(:)
284	CALL getin('phys_out_filekeys',clef_files)
285	phys_out_filestations(:)=clef_stations(:)
286	CALL getin('phys_out_filestations',clef_stations)
287	phys_out_filelevels(:)=lev_files(:)
288	CALL getin('phys_out_filelevels',lev_files)
289	CALL getin('phys_out_filetimesteps',chtimestep)
290	phys_out_filetypes(:)=type_ecri(:)
291	CALL getin('phys_out_filetypes',type_ecri)
292
293	type_ecri_files(:)=type_ecri(:)
294
295	! if (ok_all_xml) phys_out_filelevels = 999
296
297	WRITE(lunout,*)'phys_out_lonmin=',phys_out_lonmin
298	WRITE(lunout,*)'phys_out_lonmax=',phys_out_lonmax
299	WRITE(lunout,*)'phys_out_latmin=',phys_out_latmin
300	WRITE(lunout,*)'phys_out_latmax=',phys_out_latmax
301	WRITE(lunout,*)'phys_out_filenames=',phys_out_filenames
302	WRITE(lunout,*)'phys_out_filetypes=',type_ecri
303	WRITE(lunout,*)'phys_out_filekeys=',clef_files
304	WRITE(lunout,*)'phys_out_filestations=',clef_stations
305	WRITE(lunout,*)'phys_out_filelevels=',lev_files
306	WRITE(lunout,*)'phys_out_regfkey=',phys_out_regfkey
307
308	! A noter pour
309	! l heure initiale - dans les fichiers histoire hist* - on met comme
310	! heure de debut soit la vraie heure (pour le 1D) soit 0h (pour le 3D)
311	! afin d avoir une seule sortie mensuelle par mois lorsque l on tourne
312	! par annee (IM).
313	!
314	idayref = day_ref
315	IF (klon_glo==1) THEN
316	! current_time (used to compute hour) is updated at the begining of
317	! the physics; to set the correct outputs "initial time" we thus
318	! have to use (hour-dtphys).
319	CALL ymds2ju(annee_ref, 1, idayref, hour-pdtphys, zjulian)
320	print *,'phys_output_mod: annee,iday,hour,zjulian=',annee_ref,idayref, hour, zjulian
321	ELSE
322	CALL ymds2ju(annee_ref, 1, idayref, 0.0, zjulian)
323	CALL ymds2ju(annee_ref, 1, day_ini, start_time*rday, zjulian_start)
324	ENDIF
325
326	#ifdef CPP_XIOS
327	! ug R\'eglage du calendrier xios
328	!Temps julian => an, mois, jour, heure
329	CALL ju2ymds(zjulian, x_an, x_mois, x_jour, x_heure)
330	CALL ju2ymds(zjulian_start, ini_an, ini_mois, ini_jour, ini_heure)
331	CALL wxios_set_cal(dtime, calend, x_an, x_mois, x_jour, x_heure, ini_an, &
332	ini_mois, ini_jour, ini_heure )
333	#endif
334
335	!!!!!!!!!!!!!!!!!!!!!!! Boucle sur les fichiers !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
336	! Appel de histbeg et histvert pour creer le fichier et les niveaux verticaux !!
337	! Appel des histbeg pour definir les variables (nom, moy ou inst, freq de sortie ..
338	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
339
340	zdtime_moy = dtime ! Frequence ou l on moyenne
341
342
343	ecrit_files(7) = ecrit_files(1)
344	ecrit_files(8) = ecrit_files(2)
345	ecrit_files(9) = ecrit_files(3)
346
347	DO iff=1,nfiles
348
349	! Calculate ecrit_files for all files
350	IF ( chtimestep(iff).eq.'Default' ) THEN
351	! Par defaut ecrit_files = (ecrit_mensuel ecrit_jour ecrit_hf
352	! ...)*86400.
353	ecrit_files(iff)=ecrit_files(iff)*86400.
354	ELSE IF (chtimestep(iff).eq.'-1') THEN
355	PRINT*,'ecrit_files(',iff,') < 0 so IOIPSL work on different'
356	PRINT*,'months length'
357	ecrit_files(iff)=-1.
358	ELSE
359	CALL convers_timesteps(chtimestep(iff),dtime,ecrit_files(iff))
360	ENDIF
361
362	WRITE(lunout,*)'ecrit_files(',iff,')= ',ecrit_files(iff)
363	zoutm(iff) = ecrit_files(iff) ! Frequence ou l on ecrit en seconde
364
365
366	#ifdef CPP_XIOS
367	!!! Ouverture de chaque fichier XIOS !!!!!!!!!!!
368	IF (.not. ok_all_xml) THEN
369	IF (prt_level >= 10) THEN
370	print*,'phys_output_open: call wxios_add_file with phys_out_filenames(iff)=',trim(phys_out_filenames(iff))
371	ENDIF
372	CALL wxios_add_file(phys_out_filenames(iff),chtimestep(iff),lev_files(iff))
373	ENDIF
374
375	!!! Declaration des axes verticaux de chaque fichier:
376	IF (prt_level >= 10) THEN
377	print*,'phys_output_open: Declare vertical axes for each file'
378	ENDIF
379
380	IF (iff.LE.6.OR.iff.EQ.10) THEN
381	CALL wxios_add_vaxis("presnivs", &
382	levmax(iff) - levmin(iff) + 1, presnivs(levmin(iff):levmax(iff)))
383	CALL wxios_add_vaxis("Ahyb", &
384	levmax(iff) - levmin(iff) + 1, aps(levmin(iff):levmax(iff)), positif='down', &
385	bnds=Ahyb_bounds(levmin(iff):levmax(iff),:))
386	CALL wxios_add_vaxis("Bhyb", &
387	levmax(iff) - levmin(iff) + 1, bps(levmin(iff):levmax(iff)), positif='down', &
388	bnds=Bhyb_bounds(levmin(iff):levmax(iff),:))
389	CALL wxios_add_vaxis("klev", levmax(iff) - levmin(iff) + 1, &
390	lev_index(levmin(iff):levmax(iff)))
391	CALL wxios_add_vaxis("klevp1", klev+1, &
392	lev_index(1:klev+1))
393	CALL wxios_add_vaxis("bnds", 2, (/1.,2./))
394
395	CALL wxios_add_vaxis("Alt", &
396	levmax(iff) - levmin(iff) + 1, pseudoalt)
397
398	! wl1_sun/wl2_sun: minimum/maximum bound of wavelength (in um)
399	SELECT CASE(NSW)
400	CASE(6)
401	wl1_sun(1:6) = [0.180, 0.250, 0.440, 0.690, 1.190, 2.380]
402	wl2_sun(1:6) = [0.250, 0.440, 0.690, 1.190, 2.380, 4.000]
403	CASE(2)
404	wl1_sun(1:2) = [0.250, 0.690]
405	wl2_sun(1:2) = [0.690, 4.000]
406	END SELECT
407
408	DO ISW=1, NSW
409	wn1_sun(ISW)=1.e+6/wl1_sun(ISW)
410	wn2_sun(ISW)=1.e+6/wl2_sun(ISW)
411	spbnds_sun(ISW,1)=wn2_sun(ISW)
412	spbnds_sun(ISW,2)=wn1_sun(ISW)
413	spectband(ISW)=(wn1_sun(ISW)+wn2_sun(ISW))/2
414	ENDDO
415	!
416	!!! ajout axe vertical spectband : solar band number
417	CALL wxios_add_vaxis("spectband", NSW, spectband, positif='down')
418	ELSE
419	! NMC files
420	CALL wxios_add_vaxis("plev", &
421	levmax(iff) - levmin(iff) + 1, rlevSTD(levmin(iff):levmax(iff)))
422	ENDIF
423	#endif
424
425	IF (clef_files(iff)) THEN
426	!!!!!!!!!!!!!!!!! Traitement dans le cas ou l'on veut stocker sur un domaine limite !!
427	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
428	IF (phys_out_regfkey(iff)) THEN
429	imin_ins=1
430	imax_ins=nbp_lon
431	jmin_ins=1
432	jmax_ins=jjmp1
433
434	! correction abderr
435	DO i=1,nbp_lon
436	WRITE(lunout,*)'io_lon(i)=',io_lon(i)
437	IF (io_lon(i).le.phys_out_lonmin(iff)) imin_ins=i
438	IF (io_lon(i).le.phys_out_lonmax(iff)) imax_ins=i+1
439	ENDDO
440
441	DO j=1,jjmp1
442	WRITE(lunout,*)'io_lat(j)=',io_lat(j)
443	IF (io_lat(j).ge.phys_out_latmin(iff)) jmax_ins=j+1
444	IF (io_lat(j).ge.phys_out_latmax(iff)) jmin_ins=j
445	ENDDO
446
447	WRITE(lunout,*)'On stoke le fichier histoire numero ',iff,' sur ', &
448	imin_ins,imax_ins,jmin_ins,jmax_ins
449	WRITE(lunout,*)'longitudes : ', &
450	io_lon(imin_ins),io_lon(imax_ins), &
451	'latitudes : ', &
452	io_lat(jmax_ins),io_lat(jmin_ins)
453
454	CALL histbeg(phys_out_filenames(iff),nbp_lon,io_lon,jjmp1,io_lat, &
455	imin_ins,imax_ins-imin_ins+1, &
456	jmin_ins,jmax_ins-jmin_ins+1, &
457	itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff))
458	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
459	!IM fichiers stations
460	ELSE IF (clef_stations(iff)) THEN
461
462	IF (prt_level >= 10) THEN
463	WRITE(lunout,*)'phys_output_open: iff=',iff,' phys_out_filenames(iff)=',phys_out_filenames(iff)
464	ENDIF
465
466	CALL histbeg_phy_all(rlon,rlat,pim,tabij,ipt,jpt,plon,plat,plon_bounds,plat_bounds, &
467	phys_out_filenames(iff), &
468	itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff))
469	ELSE
470
471	IF (prt_level >= 10) THEN
472	WRITE(lunout,*)'phys_output_open: iff=',iff,' phys_out_filenames(iff)=',phys_out_filenames(iff)
473	ENDIF
474
475	CALL histbeg_phy_all(phys_out_filenames(iff),itau_phy,zjulian,&
476	dtime,nhorim(iff),nid_files(iff))
477	ENDIF
478
479	#ifndef CPP_IOIPSL_NO_OUTPUT
480	IF (iff.LE.6.OR.iff.EQ.10) THEN
481	CALL histvert(nid_files(iff), "presnivs", "Vertical levels", "Pa", &
482	levmax(iff) - levmin(iff) + 1, &
483	presnivs(levmin(iff):levmax(iff)), nvertm(iff),"down")
484	!!!! Composantes de la coordonnee sigma-hybride
485	CALL histvert(nid_files(iff), "Ahyb","Ahyb comp of Hyb Cord ", "Pa", &
486	levmax(iff) - levmin(iff) + 1,aps,nvertap(iff))
487
488	CALL histvert(nid_files(iff), "Bhyb","Bhyb comp of Hyb Cord", " ", &
489	levmax(iff) - levmin(iff) + 1,bps,nvertbp(iff))
490
491	CALL histvert(nid_files(iff), "Alt","Height approx for scale heigh of 8km at levels", "Km", &
492	levmax(iff) - levmin(iff) + 1,pseudoalt,nvertAlt(iff))
493
494	ELSE
495	! NMC files
496	CALL histvert(nid_files(iff), "plev", "pressure", "Pa", &
497	levmax(iff) - levmin(iff) + 1, &
498	rlevSTD(levmin(iff):levmax(iff)), nvertm(iff), "down")
499	ENDIF
500	#endif
501
502	ENDIF ! clef_files
503
504	itr = 0
505	DO iq = 1, nqtot
506	IF(.NOT.tracers(iq)%isAdvected .OR. tracers(iq)%isH2Ofamily) CYCLE
507	itr = itr + 1
508	dn = 'd'//TRIM(tracers(iq)%name)//'_'
509
510	flag = [1, 5, 5, 5, 10, 10, 11, 11, 11, 11]
511	lnam = 'Tracer '//TRIM(tracers(iq)%longName)
512	tnam = TRIM(tracers(iq)%name); o_trac (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
513
514	flag = [4, 7, 7, 7, 10, 10, 11, 11, 11, 11]
515	lnam = 'Tendance tracer '//TRIM(tracers(iq)%longName)
516	tnam = TRIM(dn)//'vdf'; o_dtr_vdf (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
517
518	flag = [5, 7, 7, 7, 10, 10, 11, 11, 11, 11]
519	tnam = TRIM(dn)//'the'; o_dtr_the (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
520	tnam = TRIM(dn)//'con'; o_dtr_con (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
521
522	flag = [7, 7, 7, 7, 10, 10, 11, 11, 11, 11]
523	tnam = TRIM(dn)//'lessi_impa'; o_dtr_lessi_impa(itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
524	tnam = TRIM(dn)//'lessi_nucl'; o_dtr_lessi_nucl(itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
525	tnam = TRIM(dn)//'insc'; o_dtr_insc (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
526	tnam = TRIM(dn)//'bcscav'; o_dtr_bcscav (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
527	tnam = TRIM(dn)//'evapls'; o_dtr_evapls (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
528	tnam = TRIM(dn)//'ls'; o_dtr_ls (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
529	tnam = TRIM(dn)//'trsp'; o_dtr_trsp (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
530	tnam = TRIM(dn)//'sscav'; o_dtr_sscav (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
531	tnam = TRIM(dn)//'sat'; o_dtr_sat (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
532	tnam = TRIM(dn)//'uscav'; o_dtr_uscav (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
533
534	lnam = 'tracer tendency dry deposition'//TRIM(tracers(iq)%longName)
535	tnam = 'cum'//TRIM(dn)//'dry'; o_dtr_dry (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
536
537	flag = [1, 4, 10, 10, 10, 10, 11, 11, 11, 11]
538	lnam = 'Cumulated tracer '//TRIM(tracers(iq)%longName)
539	tnam = 'cum'//TRIM(tracers(iq)%name); o_trac_cum(itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
540	ENDDO
541
542	ENDDO ! iff
543
544	#ifdef ISO
545	write(,) 'phys_output_mid 589'
546	do ixt=1,ntraciso
547	if (ixt <= niso) then
548	outiso=striso(ixt)
549	else
550	#ifdef ISOTRAC
551	iiso=index_iso(ixt)
552	izone=index_zone(ixt)
553	outiso=striso(iiso)//strtrac(izone)
554	#else
555	write(,) 'phys_output_mod 546: ixt,ntraciso=', ixt,ntraciso
556	stop
557	#endif
558	endif
559
560	flag = [1, 1, 1, 10, 5, 10, 11, 11, 11, 11]; unit = 'kg/(s*m2)'
561	o_xtprecip(ixt)=ctrl_out(flag, 'precip'//TRIM(outiso), 'Precip Totale liq+sol', unit, [('',i=1,nfiles)])
562	o_xtpluc (ixt)=ctrl_out(flag, 'pluc'//TRIM(outiso), 'Convective Precip.', unit, [('',i=1,nfiles)])
563
564	flag = [1, 1, 1, 10, 10, 10, 11, 11, 11, 11]
565	o_xtplul (ixt)=ctrl_out(flag, 'plul'//TRIM(outiso), 'Large-scale Precip.', unit, [('',i=1,nfiles)])
566	o_xtevap (ixt)=ctrl_out(flag, 'evap'//TRIM(outiso), 'Evaporat.', unit, [('',i=1,nfiles)])
567
568	flag = [2, 3, 4, 10, 10, 10, 11, 11, 11, 11]; unit = 'kg/kg'
569	o_xtovap (ixt)=ctrl_out(flag, 'ovap'//TRIM(outiso), 'Specific humidity', unit, [('',i=1,nfiles)])
570	o_xtoliq (ixt)=ctrl_out(flag, 'oliq'//TRIM(outiso), 'Liquid water', unit, [('',i=1,nfiles)])
571	o_xtcond (ixt)=ctrl_out(flag, 'ocond'//TRIM(outiso), 'Condensed water', unit, [('',i=1,nfiles)])
572
573	flag = [4, 10, 10, 10, 10, 10, 11, 11, 11, 11]; unit = '(kg/kg)/s'
574	o_dxtdyn (ixt)=ctrl_out(flag, 'dqdyn'//TRIM(outiso), 'Dynamics dQ', unit, [('',i=1,nfiles)])
575	o_dxtldyn (ixt)=ctrl_out(flag, 'dqldyn'//TRIM(outiso), 'Dynamics dQL', unit, [('',i=1,nfiles)])
576	o_dxtcon (ixt)=ctrl_out(flag, 'dqcon'//TRIM(outiso), 'Convection dQ', unit, [('',i=1,nfiles)])
577	o_dxteva (ixt)=ctrl_out(flag, 'dqeva'//TRIM(outiso), 'Reevaporation dQ', unit, [('',i=1,nfiles)])
578	o_dxtlsc (ixt)=ctrl_out(flag, 'dqlsc'//TRIM(outiso), 'Condensation dQ', unit, [('',i=1,nfiles)])
579	o_dxtajs (ixt)=ctrl_out(flag, 'dqajs'//TRIM(outiso), 'Dry adjust. dQ', unit, [('',i=1,nfiles)])
580	o_dxtvdf (ixt)=ctrl_out(flag, 'dqvdf'//TRIM(outiso), 'Boundary-layer dQ', unit, [('',i=1,nfiles)])
581	o_dxtthe (ixt)=ctrl_out(flag, 'dqthe'//TRIM(outiso), 'Thermal dQ', unit, [('',i=1,nfiles)])
582
583	IF(ok_qch4) o_dxtch4(ixt)=ctrl_out(flag, 'dqch4'//TRIM(outiso), 'H2O due to CH4 oxidation & photolysis', &
584	unit, [('',i=1,nfiles)])
585	IF(ixt == iso_HTO) THEN
586	o_dxtprod_nucl(ixt)=ctrl_out(flag, 'dqprodnucl'//TRIM(outiso), 'dHTO/dt due to nuclear production', &
587	unit, [('',i=1,nfiles)])
588	o_dxtcosmo (ixt)=ctrl_out(flag, 'dqcosmo'//TRIM(outiso), 'dHTO/dt due to cosmogenic production', &
589	unit, [('',i=1,nfiles)])
590	o_dxtdecroiss (ixt)=ctrl_out(flag, 'dqdecroiss'//TRIM(outiso), 'dHTO/dt due to radiative destruction', &
591	unit, [('',i=1,nfiles)])
592	END IF
593	enddo !do ixt=1,niso
594	write(,) 'phys_output_mid 596'
595	#endif
596
597
598	! Updated write frequencies due to phys_out_filetimesteps.
599	! Write frequencies are now in seconds.
600	ecrit_mth = ecrit_files(1)
601	ecrit_day = ecrit_files(2)
602	ecrit_hf = ecrit_files(3)
603	ecrit_ins = ecrit_files(4)
604	ecrit_LES = ecrit_files(5)
605	ecrit_ins = ecrit_files(6)
606
607	IF (prt_level >= 10) THEN
608	WRITE(lunout,*)'swaerofree_diag=',swaerofree_diag
609	WRITE(lunout,*)'swaero_diag=',swaero_diag
610	WRITE(lunout,*)'dryaod_diag=',dryaod_diag
611	WRITE(lunout,*)'ok_4xCO2atm=',ok_4xCO2atm
612	WRITE(lunout,*)'phys_output_open: ends here'
613	ENDIF
614
615	END SUBROUTINE phys_output_open
616
617	SUBROUTINE convers_timesteps(str,dtime,timestep)
618
619	use ioipsl
620	USE phys_cal_mod
621	USE time_phylmdz_mod, ONLY: day_ref, annee_ref
622	USE print_control_mod, ONLY: lunout
623
624	IMPLICIT NONE
625
626	CHARACTER(LEN=20) :: str
627	CHARACTER(LEN=10) :: type
628	INTEGER :: ipos,il
629	real :: ttt,xxx,timestep,dayseconde,dtime
630	parameter (dayseconde=86400.)
631
632	ipos=scan(str,'0123456789.',.TRUE.)
633	!
634	il=len_trim(str)
635	WRITE(lunout,*) "ipos = ", ipos
636	WRITE(lunout,*) "il = ", il
637	IF (ipos == 0) CALL abort_physic("convers_timesteps", "bad str", 1)
638	read(str(1:ipos),*) ttt
639	WRITE(lunout,*)ttt
640	type=str(ipos+1:il)
641
642	IF ( il == ipos ) THEN
643	type='day'
644	ENDIF
645
646	IF ( type == 'day'.or.type == 'days'.or.type == 'jours'.or.type == 'jour' ) timestep = ttt * dayseconde
647	IF ( type == 'mounths'.or.type == 'mth'.or.type == 'mois' ) THEN
648	WRITE(lunout,*)'annee_ref,day_ref mon_len',annee_ref,day_ref,mth_len
649	timestep = ttt * dayseconde * mth_len
650	ENDIF
651	IF ( type == 'hours'.or.type == 'hr'.or.type == 'heurs') timestep = ttt * dayseconde / 24.
652	IF ( type == 'mn'.or.type == 'minutes' ) timestep = ttt * 60.
653	IF ( type == 's'.or.type == 'sec'.or.type == 'secondes' ) timestep = ttt
654	IF ( type == 'TS' ) timestep = ttt * dtime
655
656	WRITE(lunout,*)'type = ',type
657	WRITE(lunout,*)'nb j/h/m = ',ttt
658	WRITE(lunout,*)'timestep(s)=',timestep
659
660	END SUBROUTINE convers_timesteps
661
662	END MODULE phys_output_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format