Context Navigation

phys_output_mod.F90 @ 4982

Last change on this file since 4982 was 4817, checked in by Sebastien Nguyen, 9 months ago
modifications for using xios with LMDZISO and a minor bug in wxios.F90
File size: 28.6 KB

Rev	Line
[3940]	1	! $Id: phys_output_mod.F90 3792 2021-01-04 17:01:25Z evignon $
[3927]	2	!
	3
	4	MODULE phys_output_mod
	5	USE indice_sol_mod
	6	USE phys_output_var_mod
	7	USE phys_output_write_mod, ONLY : phys_output_write
	8	REAL, DIMENSION(nfiles),SAVE :: ecrit_files
	9
	10	! Abderrahmane 12 2007
	11	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	12	!!! Ecreture des Sorties du modele dans les fichiers Netcdf :
	13	! histmth.nc : moyennes mensuelles
	14	! histday.nc : moyennes journalieres
	15	! histhf.nc : moyennes toutes les 3 heures
	16	! histins.nc : valeurs instantanees
	17	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	18
	19	CONTAINS
	20
	21	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	22	!!!!!!!!! Ouverture des fichier et definition des variable de sortie !!!!!!!!
	23	!! histbeg, histvert et histdef
	24	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	25
	26	SUBROUTINE phys_output_open(rlon,rlat,pim,tabij,ipt,jpt,plon,plat, &
	27	jjmp1,nlevSTD,clevSTD,rlevSTD, dtime, ok_veget, &
	28	type_ocean, iflag_pbl,iflag_pbl_split,ok_mensuel,ok_journe, &
	29	ok_hf,ok_instan,ok_LES,ok_ade,ok_aie, read_climoz, &
	30	phys_out_filestations, &
	31	aerosol_couple, flag_aerosol_strat, &
	32	pdtphys, paprs, pphis, pplay, lmax_th, ptconv, ptconvth, ivap, &
	33	d_u, d_t, qx, d_qx, zmasse, ok_sync)
	34
	35	USE iophy
	36	USE dimphy
[4170]	37	USE infotrac_phy, ONLY: nqtot, tracers, niso, ntraciso=>ntiso
[4120]	38	USE strings_mod, ONLY: maxlen
[3927]	39	USE ioipsl
	40	USE phys_cal_mod, only : hour, calend
	41	USE mod_phys_lmdz_para
	42	!Martin
[3940]	43	USE surface_data, ONLY : landice_opt
[3927]	44	USE phys_output_ctrlout_mod
	45	USE mod_grid_phy_lmdz, only: klon_glo,nbp_lon,nbp_lat
	46	USE print_control_mod, ONLY: prt_level,lunout
[4817]	47	USE vertical_layers_mod, ONLY: ap,bp,preff,presnivs, aps, bps, pseudoalt, presinter
[3927]	48	USE time_phylmdz_mod, ONLY: day_ini, itau_phy, start_time, annee_ref, day_ref
	49	! ug Pour les sorties XIOS
	50	USE wxios
	51	#ifdef ISO
[4149]	52	USE isotopes_mod, ONLY: isoName,iso_HTO
[3927]	53	#ifdef ISOTRAC
	54	use isotrac_mod, only: index_zone,index_iso,strtrac
	55	#endif
	56	#endif
	57
	58	IMPLICIT NONE
	59	include "clesphys.h"
[4089]	60	include "alpale.h"
[3927]	61	include "YOMCST.h"
	62
	63	! ug Nouveaux arguments n\'ecessaires au histwrite_mod:
	64	INTEGER, INTENT(IN) :: ivap
	65	INTEGER, DIMENSION(klon), INTENT(IN) :: lmax_th
	66	LOGICAL, INTENT(IN) :: ok_sync
	67	LOGICAL, DIMENSION(klon, klev), INTENT(IN) :: ptconv, ptconvth
	68	REAL, INTENT(IN) :: pdtphys
	69	REAL, DIMENSION(klon), INTENT(IN) :: pphis
	70	REAL, DIMENSION(klon, klev), INTENT(IN) :: pplay, d_u, d_t
	71	REAL, DIMENSION(klon, klev+1), INTENT(IN) :: paprs
	72	REAL, DIMENSION(klon,klev,nqtot), INTENT(IN):: qx, d_qx
	73	REAL, DIMENSION(klon, klev), INTENT(IN) :: zmasse
	74
	75
	76	REAL,DIMENSION(klon),INTENT(IN) :: rlon
	77	REAL,DIMENSION(klon),INTENT(IN) :: rlat
	78	INTEGER, INTENT(IN) :: pim
	79	INTEGER, DIMENSION(pim) :: tabij
	80	INTEGER,DIMENSION(pim), INTENT(IN) :: ipt, jpt
	81	REAL,DIMENSION(pim), INTENT(IN) :: plat, plon
	82	REAL,DIMENSION(pim,2) :: plat_bounds, plon_bounds
	83
	84	INTEGER :: jjmp1
	85	INTEGER :: nlevSTD, radpas
	86	LOGICAL :: ok_mensuel, ok_journe, ok_hf, ok_instan
	87	LOGICAL :: ok_LES,ok_ade,ok_aie
	88	INTEGER :: flag_aerosol_strat
	89	LOGICAL :: aerosol_couple
	90	INTEGER, INTENT(IN):: read_climoz ! read ozone climatology
	91	! Allowed values are 0, 1 and 2
	92	! 0: do not read an ozone climatology
	93	! 1: read a single ozone climatology that will be used day and night
	94	! 2: read two ozone climatologies, the average day and night
	95	! climatology and the daylight climatology
	96
	97	REAL :: dtime
	98	INTEGER :: idayref
	99	REAL :: zjulian_start, zjulian
	100	CHARACTER(LEN=4), DIMENSION(nlevSTD) :: clevSTD
	101	REAL, DIMENSION(nlevSTD) :: rlevSTD
[4056]	102	INTEGER :: nsrf, k, iq, iff, i, j, ilev, itr, ixt, iiso, izone
[3927]	103	INTEGER :: naero
	104	LOGICAL :: ok_veget
	105	INTEGER :: iflag_pbl
	106	INTEGER :: iflag_pbl_split
	107	CHARACTER(LEN=4) :: bb2
	108	CHARACTER(LEN=2) :: bb3
	109	CHARACTER(LEN=6) :: type_ocean
	110	INTEGER, DIMENSION(nbp_lon*jjmp1) :: ndex2d
	111	INTEGER, DIMENSION(nbp_lonjjmp1klev) :: ndex3d
	112	INTEGER :: imin_ins, imax_ins
	113	INTEGER :: jmin_ins, jmax_ins
	114	INTEGER, DIMENSION(nfiles) :: phys_out_levmin, phys_out_levmax
	115	INTEGER, DIMENSION(nfiles) :: phys_out_filelevels
	116	CHARACTER(LEN=20), DIMENSION(nfiles) :: chtimestep = (/ 'Default', 'Default', 'Default', 'Default', 'Default', &
	117	'Default', 'Default', 'Default', 'Default', 'Default' /)
	118	LOGICAL, DIMENSION(nfiles) :: phys_out_filekeys
	119	LOGICAL, DIMENSION(nfiles) :: phys_out_filestations
	120
	121	#ifdef ISO
[4149]	122	CHARACTER(LEN=maxlen) :: outiso
[4046]	123	CHARACTER(LEN=20) :: unit
[3927]	124	#endif
[4046]	125	CHARACTER(LEN=maxlen) :: tnam, lnam, dn
	126	INTEGER :: flag(nfiles)
[3927]	127
	128	!!!!!!!!!! stockage dans une region limitee pour chaque fichier !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	129	! entre [phys_out_lonmin,phys_out_lonmax] et [phys_out_latmin,phys_out_latmax]
[4056]	130	LOGICAL, DIMENSION(nfiles), SAVE :: &
	131	phys_out_regfkey = [.FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE.]
	132	REAL, DIMENSION(nfiles), SAVE :: &
	133	phys_out_lonmin = [ -180., -180., -180., -180., -180., -180., -180., -180., -180., -180.], &
	134	phys_out_lonmax = [ 180., 180., 180., 180., 180., 180., 180., 180., 180., 180.], &
	135	phys_out_latmin = [ -90., -90., -90., -90., -90., -90., -90., -90., -90., -90.], &
	136	phys_out_latmax = [ 90., 90., 90., 90., 90., 90., 90., 90., 90., 90.]
[3927]	137	REAL, DIMENSION(klev,2) :: Ahyb_bounds, Bhyb_bounds
	138	REAL, DIMENSION(klev+1) :: lev_index
	139
	140	! ug Variables utilis\'ees pour r\'ecup\'erer le calendrier pour xios
	141	INTEGER :: x_an, x_mois, x_jour
	142	REAL :: x_heure
	143	INTEGER :: ini_an, ini_mois, ini_jour
	144	REAL :: ini_heure
	145	INTEGER :: ISW
	146	REAL, DIMENSION(NSW) :: wl1_sun, wl2_sun !wavelength bounds (in um) for SW
	147	REAL, DIMENSION(NSW) :: wn1_sun, wn2_sun !wavenumber bounds (in m-1) for SW
	148	REAL, DIMENSION(NSW) :: spectband !mean wavenumb. of each sp.band
	149	REAL, DIMENSION(NSW,2) :: spbnds_sun !bounds of spectband
	150
	151	WRITE(lunout,*) 'Debut phys_output_mod.F90'
	152	! Initialisations (Valeurs par defaut
	153
	154	DO ilev=1,klev
	155	Ahyb_bounds(ilev,1) = ap(ilev)
	156	Ahyb_bounds(ilev,2) = ap(ilev+1)
	157	Bhyb_bounds(ilev,1) = bp(ilev)
	158	Bhyb_bounds(ilev,2) = bp(ilev+1)
	159	lev_index(ilev) = REAL(ilev)
	160	END DO
	161	lev_index(klev+1) = REAL(klev+1)
	162
	163	IF (.NOT. ALLOCATED(o_trac)) ALLOCATE(o_trac(nqtot))
	164	IF (.NOT. ALLOCATED(o_trac_cum)) ALLOCATE(o_trac_cum(nqtot))
	165	ALLOCATE(o_dtr_the(nqtot),o_dtr_con(nqtot),o_dtr_lessi_impa(nqtot))
	166	ALLOCATE(o_dtr_lessi_nucl(nqtot),o_dtr_insc(nqtot),o_dtr_bcscav(nqtot))
	167	ALLOCATE(o_dtr_evapls(nqtot),o_dtr_ls(nqtot),o_dtr_trsp(nqtot))
	168	ALLOCATE(o_dtr_sscav(nqtot),o_dtr_sat(nqtot),o_dtr_uscav(nqtot))
	169	ALLOCATE(o_dtr_dry(nqtot),o_dtr_vdf(nqtot))
	170
	171	#ifdef ISO
	172	ALLOCATE(o_xtprecip(ntraciso))
	173	ALLOCATE(o_xtplul(ntraciso))
	174	ALLOCATE(o_xtpluc(ntraciso))
	175	ALLOCATE(o_xtevap(ntraciso))
[4524]	176	ALLOCATE(o_xtevap_srf(ntraciso,4))
[3927]	177	ALLOCATE(o_xtovap(ntraciso))
	178	ALLOCATE(o_xtoliq(ntraciso))
	179	ALLOCATE(o_xtcond(ntraciso))
	180	ALLOCATE(o_dxtdyn(ntraciso))
	181	ALLOCATE(o_dxtldyn(ntraciso))
	182	ALLOCATE(o_dxtcon(ntraciso))
	183	ALLOCATE(o_dxtlsc(ntraciso))
	184	ALLOCATE(o_dxteva(ntraciso))
	185	ALLOCATE(o_dxtajs(ntraciso))
	186	ALLOCATE(o_dxtvdf(ntraciso))
	187	ALLOCATE(o_dxtthe(ntraciso))
	188	ALLOCATE(o_dxtch4(ntraciso))
	189	if (iso_HTO.gt.0) then
	190	ALLOCATE(o_dxtprod_nucl(ntraciso))
	191	ALLOCATE(o_dxtcosmo(ntraciso))
	192	ALLOCATE(o_dxtdecroiss(ntraciso))
	193	endif
	194	#endif
	195
	196	levmax = (/ klev, klev, klev, klev, klev, klev, nlevSTD, nlevSTD, nlevSTD, klev /)
	197
	198	phys_out_filenames(1) = 'histmth'
	199	phys_out_filenames(2) = 'histday'
	200	phys_out_filenames(3) = 'histhf6h'
	201	phys_out_filenames(4) = 'histhf3h'
	202	phys_out_filenames(5) = 'histhf3hm'
	203	phys_out_filenames(6) = 'histstn'
	204	phys_out_filenames(7) = 'histmthNMC'
	205	phys_out_filenames(8) = 'histdayNMC'
	206	phys_out_filenames(9) = 'histhfNMC'
	207	phys_out_filenames(10)= 'histstrataer'
	208
	209	type_ecri(1) = 'ave(X)'
	210	type_ecri(2) = 'ave(X)'
	211	type_ecri(3) = 'inst(X)'
	212	type_ecri(4) = 'inst(X)'
	213	type_ecri(5) = 'ave(X)'
	214	type_ecri(6) = 'inst(X)'
	215	type_ecri(7) = 'inst(X)'
	216	type_ecri(8) = 'inst(X)'
	217	type_ecri(9) = 'inst(X)'
	218	type_ecri(10)= 'ave(X)'
	219
	220	clef_files(1) = ok_mensuel
	221	clef_files(2) = ok_journe
	222	clef_files(3) = ok_hf
	223	clef_files(4) = ok_instan
	224	clef_files(5) = ok_LES
	225	clef_files(6) = ok_instan
	226	clef_files(7) = ok_histNMC(1)
	227	clef_files(8) = ok_histNMC(2)
	228	clef_files(9) = ok_histNMC(3)
	229	#ifdef CPP_StratAer
	230	clef_files(10)= .TRUE.
	231	#else
	232	clef_files(10)= .FALSE.
	233	#endif
	234
	235	!sortir des fichiers "stations" si clef_stations(:)=.TRUE.
	236	clef_stations(1) = .FALSE.
	237	clef_stations(2) = .FALSE.
	238	clef_stations(3) = .FALSE.
	239	clef_stations(4) = .FALSE.
	240	clef_stations(5) = .FALSE.
	241	clef_stations(6) = .FALSE.
	242	clef_stations(7) = .FALSE.
	243	clef_stations(8) = .FALSE.
	244	clef_stations(9) = .FALSE.
	245	clef_stations(10)= .FALSE.
	246
	247	lev_files(1) = lev_histmth
	248	lev_files(2) = lev_histday
	249	lev_files(3) = lev_histhf
	250	lev_files(4) = lev_histins
	251	lev_files(5) = lev_histLES
	252	lev_files(6) = lev_histins
	253	lev_files(7) = levout_histNMC(1)
	254	lev_files(8) = levout_histNMC(2)
	255	lev_files(9) = levout_histNMC(3)
	256	lev_files(10)= 5
	257
	258	ecrit_files(1) = ecrit_mth
	259	ecrit_files(2) = ecrit_day
	260	ecrit_files(3) = ecrit_hf
	261	ecrit_files(4) = ecrit_ins
	262	ecrit_files(5) = ecrit_LES
	263	ecrit_files(6) = ecrit_ins
	264	ecrit_files(7) = freq_outNMC(1)
	265	ecrit_files(8) = freq_outNMC(2)
	266	ecrit_files(9) = freq_outNMC(3)
	267	ecrit_files(10)= ecrit_mth
	268
	269	!! Lectures des parametres de sorties dans physiq.def
	270
	271	CALL getin('phys_out_regfkey',phys_out_regfkey)
	272	CALL getin('phys_out_lonmin',phys_out_lonmin)
	273	CALL getin('phys_out_lonmax',phys_out_lonmax)
	274	CALL getin('phys_out_latmin',phys_out_latmin)
	275	CALL getin('phys_out_latmax',phys_out_latmax)
	276	phys_out_levmin(:)=levmin(:)
	277	CALL getin('phys_out_levmin',levmin)
	278	phys_out_levmax(:)=levmax(:)
	279	CALL getin('phys_out_levmax',levmax)
	280	CALL getin('phys_out_filenames',phys_out_filenames)
	281	phys_out_filekeys(:)=clef_files(:)
	282	CALL getin('phys_out_filekeys',clef_files)
	283	phys_out_filestations(:)=clef_stations(:)
	284	CALL getin('phys_out_filestations',clef_stations)
	285	phys_out_filelevels(:)=lev_files(:)
	286	CALL getin('phys_out_filelevels',lev_files)
	287	CALL getin('phys_out_filetimesteps',chtimestep)
	288	phys_out_filetypes(:)=type_ecri(:)
	289	CALL getin('phys_out_filetypes',type_ecri)
	290
	291	type_ecri_files(:)=type_ecri(:)
	292
	293	! if (ok_all_xml) phys_out_filelevels = 999
	294
	295	WRITE(lunout,*)'phys_out_lonmin=',phys_out_lonmin
	296	WRITE(lunout,*)'phys_out_lonmax=',phys_out_lonmax
	297	WRITE(lunout,*)'phys_out_latmin=',phys_out_latmin
	298	WRITE(lunout,*)'phys_out_latmax=',phys_out_latmax
	299	WRITE(lunout,*)'phys_out_filenames=',phys_out_filenames
	300	WRITE(lunout,*)'phys_out_filetypes=',type_ecri
	301	WRITE(lunout,*)'phys_out_filekeys=',clef_files
	302	WRITE(lunout,*)'phys_out_filestations=',clef_stations
	303	WRITE(lunout,*)'phys_out_filelevels=',lev_files
	304	WRITE(lunout,*)'phys_out_regfkey=',phys_out_regfkey
	305
	306	! A noter pour
	307	! l heure initiale - dans les fichiers histoire hist* - on met comme
	308	! heure de debut soit la vraie heure (pour le 1D) soit 0h (pour le 3D)
	309	! afin d avoir une seule sortie mensuelle par mois lorsque l on tourne
	310	! par annee (IM).
	311	!
	312	idayref = day_ref
	313	IF (klon_glo==1) THEN
	314	! current_time (used to compute hour) is updated at the begining of
	315	! the physics; to set the correct outputs "initial time" we thus
	316	! have to use (hour-dtphys).
	317	CALL ymds2ju(annee_ref, 1, idayref, hour-pdtphys, zjulian)
	318	print *,'phys_output_mod: annee,iday,hour,zjulian=',annee_ref,idayref, hour, zjulian
	319	ELSE
	320	CALL ymds2ju(annee_ref, 1, idayref, 0.0, zjulian)
	321	CALL ymds2ju(annee_ref, 1, day_ini, start_time*rday, zjulian_start)
	322	ENDIF
	323
[4619]	324	IF (using_xios) THEN
	325	! ug R\'eglage du calendrier xios
	326	!Temps julian => an, mois, jour, heure
	327	CALL ju2ymds(zjulian, x_an, x_mois, x_jour, x_heure)
	328	CALL ju2ymds(zjulian_start, ini_an, ini_mois, ini_jour, ini_heure)
	329	CALL wxios_set_cal(dtime, calend, x_an, x_mois, x_jour, x_heure, ini_an, &
	330	ini_mois, ini_jour, ini_heure )
	331	ENDIF
[3927]	332
	333	!!!!!!!!!!!!!!!!!!!!!!! Boucle sur les fichiers !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	334	! Appel de histbeg et histvert pour creer le fichier et les niveaux verticaux !!
	335	! Appel des histbeg pour definir les variables (nom, moy ou inst, freq de sortie ..
	336	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	337
	338	zdtime_moy = dtime ! Frequence ou l on moyenne
	339
	340
	341	ecrit_files(7) = ecrit_files(1)
	342	ecrit_files(8) = ecrit_files(2)
	343	ecrit_files(9) = ecrit_files(3)
	344
	345	DO iff=1,nfiles
	346
	347	! Calculate ecrit_files for all files
	348	IF ( chtimestep(iff).eq.'Default' ) THEN
	349	! Par defaut ecrit_files = (ecrit_mensuel ecrit_jour ecrit_hf
	350	! ...)*86400.
	351	ecrit_files(iff)=ecrit_files(iff)*86400.
	352	ELSE IF (chtimestep(iff).eq.'-1') THEN
	353	PRINT*,'ecrit_files(',iff,') < 0 so IOIPSL work on different'
	354	PRINT*,'months length'
	355	ecrit_files(iff)=-1.
	356	ELSE
	357	CALL convers_timesteps(chtimestep(iff),dtime,ecrit_files(iff))
	358	ENDIF
	359
	360	WRITE(lunout,*)'ecrit_files(',iff,')= ',ecrit_files(iff)
	361	zoutm(iff) = ecrit_files(iff) ! Frequence ou l on ecrit en seconde
	362
	363
[4619]	364	IF (using_xios) THEN
[3927]	365	!!! Ouverture de chaque fichier XIOS !!!!!!!!!!!
[4619]	366	IF (.not. ok_all_xml) THEN
	367	IF (prt_level >= 10) THEN
	368	print*,'phys_output_open: call wxios_add_file with phys_out_filenames(iff)=',trim(phys_out_filenames(iff))
	369	ENDIF
	370	CALL wxios_add_file(phys_out_filenames(iff),chtimestep(iff),lev_files(iff))
[3927]	371	ENDIF
	372
	373	!!! Declaration des axes verticaux de chaque fichier:
[4619]	374	IF (prt_level >= 10) THEN
	375	print*,'phys_output_open: Declare vertical axes for each file'
	376	ENDIF
[3927]	377
[4619]	378	IF (iff.LE.6.OR.iff.EQ.10) THEN
	379	CALL wxios_add_vaxis("presnivs", &
[4817]	380	levmax(iff) - levmin(iff) + 1, presnivs(levmin(iff):levmax(iff)))
	381	CALL wxios_add_vaxis("presinter", &
	382	klev + 1, presinter(1:klev+1))
[4619]	383	CALL wxios_add_vaxis("Ahyb", &
[3927]	384	levmax(iff) - levmin(iff) + 1, aps(levmin(iff):levmax(iff)), positif='down', &
	385	bnds=Ahyb_bounds(levmin(iff):levmax(iff),:))
[4619]	386	CALL wxios_add_vaxis("Bhyb", &
[3927]	387	levmax(iff) - levmin(iff) + 1, bps(levmin(iff):levmax(iff)), positif='down', &
	388	bnds=Bhyb_bounds(levmin(iff):levmax(iff),:))
[4619]	389	CALL wxios_add_vaxis("klev", levmax(iff) - levmin(iff) + 1, &
[3927]	390	lev_index(levmin(iff):levmax(iff)))
[4619]	391	CALL wxios_add_vaxis("klevp1", klev+1, &
[3927]	392	lev_index(1:klev+1))
[4619]	393	CALL wxios_add_vaxis("bnds", 2, (/1.,2./))
[3927]	394
[4619]	395	CALL wxios_add_vaxis("Alt", &
[3927]	396	levmax(iff) - levmin(iff) + 1, pseudoalt)
[4619]	397
	398	! wl1_sun/wl2_sun: minimum/maximum bound of wavelength (in um)
	399	SELECT CASE(NSW)
	400	CASE(6)
	401	wl1_sun(1:6) = [0.180, 0.250, 0.440, 0.690, 1.190, 2.380]
	402	wl2_sun(1:6) = [0.250, 0.440, 0.690, 1.190, 2.380, 4.000]
	403	CASE(2)
	404	wl1_sun(1:2) = [0.250, 0.690]
	405	wl2_sun(1:2) = [0.690, 4.000]
	406	END SELECT
[3927]	407
[4619]	408	DO ISW=1, NSW
	409	wn1_sun(ISW)=1.e+6/wl1_sun(ISW)
	410	wn2_sun(ISW)=1.e+6/wl2_sun(ISW)
	411	spbnds_sun(ISW,1)=wn2_sun(ISW)
	412	spbnds_sun(ISW,2)=wn1_sun(ISW)
	413	spectband(ISW)=(wn1_sun(ISW)+wn2_sun(ISW))/2
	414	ENDDO
[3927]	415	!
	416	!!! ajout axe vertical spectband : solar band number
[4619]	417	CALL wxios_add_vaxis("spectband", NSW, spectband, positif='down')
	418	ELSE
[3927]	419	! NMC files
[4619]	420	CALL wxios_add_vaxis("plev", &
[3927]	421	levmax(iff) - levmin(iff) + 1, rlevSTD(levmin(iff):levmax(iff)))
[4619]	422	ENDIF
[4817]	423	ENDIF !using_xios
[3927]	424
	425	IF (clef_files(iff)) THEN
	426	!!!!!!!!!!!!!!!!! Traitement dans le cas ou l'on veut stocker sur un domaine limite !!
	427	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	428	IF (phys_out_regfkey(iff)) THEN
	429	imin_ins=1
	430	imax_ins=nbp_lon
	431	jmin_ins=1
	432	jmax_ins=jjmp1
	433
	434	! correction abderr
	435	DO i=1,nbp_lon
	436	WRITE(lunout,*)'io_lon(i)=',io_lon(i)
	437	IF (io_lon(i).le.phys_out_lonmin(iff)) imin_ins=i
	438	IF (io_lon(i).le.phys_out_lonmax(iff)) imax_ins=i+1
	439	ENDDO
	440
	441	DO j=1,jjmp1
	442	WRITE(lunout,*)'io_lat(j)=',io_lat(j)
	443	IF (io_lat(j).ge.phys_out_latmin(iff)) jmax_ins=j+1
	444	IF (io_lat(j).ge.phys_out_latmax(iff)) jmin_ins=j
	445	ENDDO
	446
	447	WRITE(lunout,*)'On stoke le fichier histoire numero ',iff,' sur ', &
	448	imin_ins,imax_ins,jmin_ins,jmax_ins
	449	WRITE(lunout,*)'longitudes : ', &
	450	io_lon(imin_ins),io_lon(imax_ins), &
	451	'latitudes : ', &
	452	io_lat(jmax_ins),io_lat(jmin_ins)
	453
	454	CALL histbeg(phys_out_filenames(iff),nbp_lon,io_lon,jjmp1,io_lat, &
	455	imin_ins,imax_ins-imin_ins+1, &
	456	jmin_ins,jmax_ins-jmin_ins+1, &
	457	itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff))
	458	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	459	!IM fichiers stations
	460	ELSE IF (clef_stations(iff)) THEN
	461
	462	IF (prt_level >= 10) THEN
	463	WRITE(lunout,*)'phys_output_open: iff=',iff,' phys_out_filenames(iff)=',phys_out_filenames(iff)
	464	ENDIF
	465
	466	CALL histbeg_phy_all(rlon,rlat,pim,tabij,ipt,jpt,plon,plat,plon_bounds,plat_bounds, &
	467	phys_out_filenames(iff), &
	468	itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff))
	469	ELSE
	470
	471	IF (prt_level >= 10) THEN
	472	WRITE(lunout,*)'phys_output_open: iff=',iff,' phys_out_filenames(iff)=',phys_out_filenames(iff)
	473	ENDIF
	474
	475	CALL histbeg_phy_all(phys_out_filenames(iff),itau_phy,zjulian,&
	476	dtime,nhorim(iff),nid_files(iff))
	477	ENDIF
	478
	479	#ifndef CPP_IOIPSL_NO_OUTPUT
	480	IF (iff.LE.6.OR.iff.EQ.10) THEN
	481	CALL histvert(nid_files(iff), "presnivs", "Vertical levels", "Pa", &
	482	levmax(iff) - levmin(iff) + 1, &
	483	presnivs(levmin(iff):levmax(iff)), nvertm(iff),"down")
	484	!!!! Composantes de la coordonnee sigma-hybride
	485	CALL histvert(nid_files(iff), "Ahyb","Ahyb comp of Hyb Cord ", "Pa", &
	486	levmax(iff) - levmin(iff) + 1,aps,nvertap(iff))
	487
	488	CALL histvert(nid_files(iff), "Bhyb","Bhyb comp of Hyb Cord", " ", &
	489	levmax(iff) - levmin(iff) + 1,bps,nvertbp(iff))
	490
	491	CALL histvert(nid_files(iff), "Alt","Height approx for scale heigh of 8km at levels", "Km", &
	492	levmax(iff) - levmin(iff) + 1,pseudoalt,nvertAlt(iff))
	493
	494	ELSE
	495	! NMC files
	496	CALL histvert(nid_files(iff), "plev", "pressure", "Pa", &
	497	levmax(iff) - levmin(iff) + 1, &
	498	rlevSTD(levmin(iff):levmax(iff)), nvertm(iff), "down")
	499	ENDIF
	500	#endif
	501
	502	ENDIF ! clef_files
	503
[4056]	504	itr = 0
	505	DO iq = 1, nqtot
[4071]	506	IF(.NOT.(tracers(iq)%isAdvected .AND. tracers(iq)%isInPhysics)) CYCLE
[4056]	507	itr = itr + 1
	508	dn = 'd'//TRIM(tracers(iq)%name)//'_'
[3927]	509
[4046]	510	flag = [1, 5, 5, 5, 10, 10, 11, 11, 11, 11]
[4056]	511	lnam = 'Tracer '//TRIM(tracers(iq)%longName)
	512	tnam = TRIM(tracers(iq)%name); o_trac (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
[3927]	513
[4046]	514	flag = [4, 7, 7, 7, 10, 10, 11, 11, 11, 11]
[4056]	515	lnam = 'Tendance tracer '//TRIM(tracers(iq)%longName)
[4046]	516	tnam = TRIM(dn)//'vdf'; o_dtr_vdf (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
[3927]	517
[4046]	518	flag = [5, 7, 7, 7, 10, 10, 11, 11, 11, 11]
	519	tnam = TRIM(dn)//'the'; o_dtr_the (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
	520	tnam = TRIM(dn)//'con'; o_dtr_con (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
[3927]	521
[4046]	522	flag = [7, 7, 7, 7, 10, 10, 11, 11, 11, 11]
	523	tnam = TRIM(dn)//'lessi_impa'; o_dtr_lessi_impa(itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
	524	tnam = TRIM(dn)//'lessi_nucl'; o_dtr_lessi_nucl(itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
	525	tnam = TRIM(dn)//'insc'; o_dtr_insc (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
	526	tnam = TRIM(dn)//'bcscav'; o_dtr_bcscav (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
	527	tnam = TRIM(dn)//'evapls'; o_dtr_evapls (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
	528	tnam = TRIM(dn)//'ls'; o_dtr_ls (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
	529	tnam = TRIM(dn)//'trsp'; o_dtr_trsp (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
	530	tnam = TRIM(dn)//'sscav'; o_dtr_sscav (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
	531	tnam = TRIM(dn)//'sat'; o_dtr_sat (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
	532	tnam = TRIM(dn)//'uscav'; o_dtr_uscav (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
[3927]	533
[4056]	534	lnam = 'tracer tendency dry deposition'//TRIM(tracers(iq)%longName)
[4046]	535	tnam = 'cum'//TRIM(dn)//'dry'; o_dtr_dry (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
[3927]	536
[4046]	537	flag = [1, 4, 10, 10, 10, 10, 11, 11, 11, 11]
[4056]	538	lnam = 'Cumulated tracer '//TRIM(tracers(iq)%longName)
	539	tnam = 'cum'//TRIM(tracers(iq)%name); o_trac_cum(itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
[4046]	540	ENDDO
[3927]	541
	542	ENDDO ! iff
	543
	544	#ifdef ISO
[4056]	545	write(,) 'phys_output_mid 589'
[4046]	546	do ixt=1,ntraciso
[4149]	547	outiso = TRIM(isoName(ixt))
	548	i = INDEX(outiso, '_', .TRUE.)
	549	outiso = outiso(1:i-1)//outiso(i+1:LEN_TRIM(outiso))
[3927]	550
[4046]	551	flag = [1, 1, 1, 10, 5, 10, 11, 11, 11, 11]; unit = 'kg/(s*m2)'
	552	o_xtprecip(ixt)=ctrl_out(flag, 'precip'//TRIM(outiso), 'Precip Totale liq+sol', unit, [('',i=1,nfiles)])
	553	o_xtpluc (ixt)=ctrl_out(flag, 'pluc'//TRIM(outiso), 'Convective Precip.', unit, [('',i=1,nfiles)])
[3927]	554
[4046]	555	flag = [1, 1, 1, 10, 10, 10, 11, 11, 11, 11]
	556	o_xtplul (ixt)=ctrl_out(flag, 'plul'//TRIM(outiso), 'Large-scale Precip.', unit, [('',i=1,nfiles)])
	557	o_xtevap (ixt)=ctrl_out(flag, 'evap'//TRIM(outiso), 'Evaporat.', unit, [('',i=1,nfiles)])
[3927]	558
[4524]	559	! ajout Camille 8 mai 2023
	560	flag = [1, 6, 10, 10, 10, 10, 11, 11, 11, 11]
	561	o_xtevap_srf (ixt,1)=ctrl_out(flag, 'evap_ter'//TRIM(outiso), 'Evap sfc'//clnsurf(1), unit, [('',i=1,nfiles)])
	562	o_xtevap_srf (ixt,2)=ctrl_out(flag, 'evap_lic'//TRIM(outiso), 'Evap sfc'//clnsurf(2), unit, [('',i=1,nfiles)])
	563	o_xtevap_srf (ixt,3)=ctrl_out(flag, 'evap_oce'//TRIM(outiso), 'Evap sfc'//clnsurf(3), unit, [('',i=1,nfiles)])
	564	o_xtevap_srf (ixt,4)=ctrl_out(flag, 'evap_sic'//TRIM(outiso), 'Evap sfc'//clnsurf(4), unit, [('',i=1,nfiles)])
	565
[4046]	566	flag = [2, 3, 4, 10, 10, 10, 11, 11, 11, 11]; unit = 'kg/kg'
	567	o_xtovap (ixt)=ctrl_out(flag, 'ovap'//TRIM(outiso), 'Specific humidity', unit, [('',i=1,nfiles)])
	568	o_xtoliq (ixt)=ctrl_out(flag, 'oliq'//TRIM(outiso), 'Liquid water', unit, [('',i=1,nfiles)])
	569	o_xtcond (ixt)=ctrl_out(flag, 'ocond'//TRIM(outiso), 'Condensed water', unit, [('',i=1,nfiles)])
	570
	571	flag = [4, 10, 10, 10, 10, 10, 11, 11, 11, 11]; unit = '(kg/kg)/s'
	572	o_dxtdyn (ixt)=ctrl_out(flag, 'dqdyn'//TRIM(outiso), 'Dynamics dQ', unit, [('',i=1,nfiles)])
	573	o_dxtldyn (ixt)=ctrl_out(flag, 'dqldyn'//TRIM(outiso), 'Dynamics dQL', unit, [('',i=1,nfiles)])
	574	o_dxtcon (ixt)=ctrl_out(flag, 'dqcon'//TRIM(outiso), 'Convection dQ', unit, [('',i=1,nfiles)])
	575	o_dxteva (ixt)=ctrl_out(flag, 'dqeva'//TRIM(outiso), 'Reevaporation dQ', unit, [('',i=1,nfiles)])
	576	o_dxtlsc (ixt)=ctrl_out(flag, 'dqlsc'//TRIM(outiso), 'Condensation dQ', unit, [('',i=1,nfiles)])
	577	o_dxtajs (ixt)=ctrl_out(flag, 'dqajs'//TRIM(outiso), 'Dry adjust. dQ', unit, [('',i=1,nfiles)])
	578	o_dxtvdf (ixt)=ctrl_out(flag, 'dqvdf'//TRIM(outiso), 'Boundary-layer dQ', unit, [('',i=1,nfiles)])
	579	o_dxtthe (ixt)=ctrl_out(flag, 'dqthe'//TRIM(outiso), 'Thermal dQ', unit, [('',i=1,nfiles)])
	580
	581	IF(ok_qch4) o_dxtch4(ixt)=ctrl_out(flag, 'dqch4'//TRIM(outiso), 'H2O due to CH4 oxidation & photolysis', &
	582	unit, [('',i=1,nfiles)])
	583	IF(ixt == iso_HTO) THEN
	584	o_dxtprod_nucl(ixt)=ctrl_out(flag, 'dqprodnucl'//TRIM(outiso), 'dHTO/dt due to nuclear production', &
	585	unit, [('',i=1,nfiles)])
	586	o_dxtcosmo (ixt)=ctrl_out(flag, 'dqcosmo'//TRIM(outiso), 'dHTO/dt due to cosmogenic production', &
	587	unit, [('',i=1,nfiles)])
	588	o_dxtdecroiss (ixt)=ctrl_out(flag, 'dqdecroiss'//TRIM(outiso), 'dHTO/dt due to radiative destruction', &
[4048]	589	unit, [('',i=1,nfiles)])
[4046]	590	END IF
	591	enddo !do ixt=1,niso
[4056]	592	write(,) 'phys_output_mid 596'
[3927]	593	#endif
	594
	595
	596	! Updated write frequencies due to phys_out_filetimesteps.
	597	! Write frequencies are now in seconds.
	598	ecrit_mth = ecrit_files(1)
	599	ecrit_day = ecrit_files(2)
	600	ecrit_hf = ecrit_files(3)
	601	ecrit_ins = ecrit_files(4)
	602	ecrit_LES = ecrit_files(5)
	603	ecrit_ins = ecrit_files(6)
	604
	605	IF (prt_level >= 10) THEN
	606	WRITE(lunout,*)'swaerofree_diag=',swaerofree_diag
	607	WRITE(lunout,*)'swaero_diag=',swaero_diag
	608	WRITE(lunout,*)'dryaod_diag=',dryaod_diag
	609	WRITE(lunout,*)'ok_4xCO2atm=',ok_4xCO2atm
	610	WRITE(lunout,*)'phys_output_open: ends here'
	611	ENDIF
	612
	613	END SUBROUTINE phys_output_open
	614
	615	SUBROUTINE convers_timesteps(str,dtime,timestep)
	616
	617	use ioipsl
	618	USE phys_cal_mod
	619	USE time_phylmdz_mod, ONLY: day_ref, annee_ref
	620	USE print_control_mod, ONLY: lunout
	621
	622	IMPLICIT NONE
	623
	624	CHARACTER(LEN=20) :: str
	625	CHARACTER(LEN=10) :: type
	626	INTEGER :: ipos,il
	627	real :: ttt,xxx,timestep,dayseconde,dtime
	628	parameter (dayseconde=86400.)
	629
	630	ipos=scan(str,'0123456789.',.TRUE.)
	631	!
	632	il=len_trim(str)
	633	WRITE(lunout,*) "ipos = ", ipos
	634	WRITE(lunout,*) "il = ", il
	635	IF (ipos == 0) CALL abort_physic("convers_timesteps", "bad str", 1)
	636	read(str(1:ipos),*) ttt
	637	WRITE(lunout,*)ttt
	638	type=str(ipos+1:il)
	639
	640	IF ( il == ipos ) THEN
	641	type='day'
	642	ENDIF
	643
	644	IF ( type == 'day'.or.type == 'days'.or.type == 'jours'.or.type == 'jour' ) timestep = ttt * dayseconde
	645	IF ( type == 'mounths'.or.type == 'mth'.or.type == 'mois' ) THEN
	646	WRITE(lunout,*)'annee_ref,day_ref mon_len',annee_ref,day_ref,mth_len
	647	timestep = ttt * dayseconde * mth_len
	648	ENDIF
	649	IF ( type == 'hours'.or.type == 'hr'.or.type == 'heurs') timestep = ttt * dayseconde / 24.
	650	IF ( type == 'mn'.or.type == 'minutes' ) timestep = ttt * 60.
	651	IF ( type == 's'.or.type == 'sec'.or.type == 'secondes' ) timestep = ttt
	652	IF ( type == 'TS' ) timestep = ttt * dtime
	653
	654	WRITE(lunout,*)'type = ',type
	655	WRITE(lunout,*)'nb j/h/m = ',ttt
	656	WRITE(lunout,*)'timestep(s)=',timestep
	657
	658	END SUBROUTINE convers_timesteps
	659
	660	END MODULE phys_output_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format