Context Navigation

cv_driver.F90 @ 5409

Last change on this file since 5409 was 5285, checked in by abarral, 7 weeks ago
As discussed internally, remove generic ONLY: ... for new _mod_h modules
Property svn:keywords set to `Id`
File size: 43.4 KB

Line
1
2	! $Header$
3
4	SUBROUTINE cv_driver(len, nd, ndp1, ntra, iflag_con, t1, q1, qs1, u1, v1, &
5	tra1, p1, ph1, iflag1, ft1, fq1, fu1, fv1, ftra1, precip1, vprecip1, &
6	cbmf1, sig1, w01, icb1, inb1, delt, ma1, upwd1, dnwd1, dnwd01, qcondc1, &
7	wd1, cape1, da1, phi1, mp1, phi21, d1a1, dam1, sij1, clw1, elij1, & !
8	! RomP
9	evap1, ep1, epmlmmm1, eplamm1, & ! RomP
10	wdtraina1, wdtrainm1, & ! RomP
11	epmax_diag1 & ! epmax_cape
12	#ifdef ISO
13	& ,xt1,fxt1 &
14	& ,xtprecip1,xtvprecip1 &
15	& , xtevap1,xtclw1,xtwdtraina1 &
16	#ifdef DIAGISO
17	& , water1,xtwater1,qp1,xtp1 &
18	& , fq_detrainement1,fq_ddft1,fq_fluxmasse1,fq_evapprecip1 &
19	& , fxt_detrainement1,fxt_ddft1,fxt_fluxmasse1, fxt_evapprecip1 &
20	& , f_detrainement1,q_detrainement1,xt_detrainement1 &
21	#endif
22	#endif
23	& )
24
25	USE dimphy
26	#ifdef ISO
27	USE infotrac_phy, ONLY: ntraciso=>ntiso,niso,itZonIso,nzone
28	USE isotopes_mod, ONLY: iso_eau,iso_HDO,ridicule,bidouille_anti_divergence
29	#ifdef ISOVERIF
30	use isotopes_verif_mod, ONLY: errmax,errmaxrel,Tmin_verif,deltalim, &
31	iso_verif_egalite_choix,iso_verif_aberrant_choix, &
32	iso_verif_aberrant, iso_verif_positif,iso_verif_positif_nostop
33	#endif
34	#ifdef ISOTRAC
35	use isotrac_mod, only: option_traceurs,izone_ddft,izone_revap, &
36	& izone_poubelle, index_zone,option_tmin,izone_cond
37	#ifdef ISOVERIF
38	USE isotopes_verif_mod, ONLY: iso_verif_traceur,iso_verif_traceur_justmass, &
39	& iso_verif_trac_masse_vect
40	use isotrac_routines_mod, ONLY: iso_verif_traceur_pbidouille
41	#endif
42	#endif
43	#endif
44	USE cv30_routines_mod, ONLY: cv30_param, cv30_prelim, cv30_feed, cv30_undilute1, cv30_trigger, cv30_compress, cv30_undilute2, &
45	cv30_closure, cv30_epmax_fn_cape, cv30_mixing, cv30_unsat, cv30_yield, cv30_tracer, cv30_uncompress
46	IMPLICIT NONE
47
48	! .............................START PROLOGUE............................
49
50
51	! All argument names (except len,nd,ntra,nloc,delt and the flags) have a
52	! "1" appended.
53	! The "1" is removed for the corresponding compressed (local) variables.
54
55	! PARAMETERS:
56	! Name Type Usage Description
57	! ---------- ---------- ------- ----------------------------
58
59	! len Integer Input first (i) dimension
60	! nd Integer Input vertical (k) dimension
61	! ndp1 Integer Input nd + 1
62	! ntra Integer Input number of tracors
63	! iflag_con Integer Input version of convect (3/4)
64	! t1 Real Input temperature
65	! q1 Real Input specific hum
66	! qs1 Real Input sat specific hum
67	! u1 Real Input u-wind
68	! v1 Real Input v-wind
69	! tra1 Real Input tracors
70	! p1 Real Input full level pressure
71	! ph1 Real Input half level pressure
72	! iflag1 Integer Output flag for Emanuel conditions
73	! ft1 Real Output temp tend
74	! fq1 Real Output spec hum tend
75	! fu1 Real Output u-wind tend
76	! fv1 Real Output v-wind tend
77	! ftra1 Real Output tracor tend
78	! precip1 Real Output precipitation
79	! VPrecip1 Real Output vertical profile of
80	! precipitations
81	! cbmf1 Real Output cloud base mass flux
82	! sig1 Real In/Out section adiabatic updraft
83	! w01 Real In/Out vertical velocity within adiab
84	! updraft
85	! delt Real Input time step
86	! Ma1 Real Output mass flux adiabatic updraft
87	! upwd1 Real Output total upward mass flux
88	! (adiab+mixed)
89	! dnwd1 Real Output saturated downward mass flux
90	! (mixed)
91	! dnwd01 Real Output unsaturated downward mass flux
92	! qcondc1 Real Output in-cld mixing ratio of
93	! condensed water
94	! wd1 Real Output downdraft velocity scale for
95	! sfc fluxes
96	! cape1 Real Output CAPE
97
98	! wdtrainA1 Real Output precipitation detrained from
99	! adiabatic draught;
100	! used in tracer transport (cvltr)
101	! wdtrainM1 Real Output precipitation detrained from mixed
102	! draughts;
103	! used in tracer transport (cvltr)
104	! da1 Real Output used in tracer transport (cvltr)
105	! phi1 Real Output used in tracer transport (cvltr)
106	! mp1 Real Output used in tracer transport (cvltr)
107
108	! phi21 Real Output used in tracer transport (cvltr)
109
110	! d1a1 Real Output used in tracer transport (cvltr)
111	! dam1 Real Output used in tracer transport (cvltr)
112
113	! evap1 Real Output
114	! ep1 Real Output
115	! sij1 Real Output
116	! elij1 Real Output
117
118	! S. Bony, Mar 2002:
119	! * Several modules corresponding to different physical processes
120	! * Several versions of convect may be used:
121	! - iflag_con=3: version lmd (previously named convect3)
122	! - iflag_con=4: version 4.3b (vect. version, previously convect1/2)
123	! + tard: - iflag_con=5: version lmd with ice (previously named convectg)
124	! S. Bony, Oct 2002:
125	! * Vectorization of convect3 (ie version lmd)
126
127	! ..............................END PROLOGUE.............................
128
129
130	! Input
131	INTEGER len
132	INTEGER nd
133	INTEGER ndp1
134	INTEGER noff
135	INTEGER iflag_con
136	INTEGER ntra
137	REAL delt
138	REAL t1(len, nd)
139	REAL q1(len, nd)
140	REAL qs1(len, nd)
141	REAL u1(len, nd)
142	REAL v1(len, nd)
143	REAL tra1(len, nd, ntra)
144	REAL p1(len, nd)
145	REAL ph1(len, ndp1)
146
147	! Output
148	INTEGER iflag1(len)
149	REAL ft1(len, nd)
150	REAL fq1(len, nd)
151	REAL fu1(len, nd)
152	REAL fv1(len, nd)
153	REAL ftra1(len, nd, ntra)
154	REAL precip1(len)
155	REAL cbmf1(len)
156	REAL sig1(klon, klev)
157	REAL w01(klon, klev)
158	REAL vprecip1(len, nd+1)
159	REAL evap1(len, nd) !RomP
160	REAL ep1(len, nd) !RomP
161	REAL ma1(len, nd)
162	REAL upwd1(len, nd)
163	REAL dnwd1(len, nd)
164	REAL dnwd01(len, nd)
165
166	REAL qcondc1(len, nd) ! cld
167	REAL wd1(len) ! gust
168	REAL cape1(len)
169
170	! RomP >>>
171	REAL wdtraina1(len, nd), wdtrainm1(len, nd)
172	REAL sij1(len, nd, nd), elij1(len, nd, nd)
173	REAL da1(len, nd), phi1(len, nd, nd), mp1(len, nd)
174
175	REAL phi21(len, nd, nd)
176	REAL d1a1(len, nd), dam1(len, nd)
177	REAL epmlmmm1(len, nd, nd), eplamm1(len, nd)
178	! RomP <<<
179	REAL epmax_diag1 (len) ! epmax_cape
180
181
182	#ifdef ISO
183	real xt1(ntraciso,len,nd)
184	real fxt1(ntraciso,len,nd)
185	real xtprecip1(ntraciso,len)
186	real xtvprecip1(ntraciso,len,nd+1)
187	real xtevap1(ntraciso,len,nd)
188	real xtwdtraina1(ntraciso,len,nd)
189	real xtelij1(ntraciso,len, nd, nd)
190	#ifdef DIAGISO
191	real water1(len,nd)
192	real xtwater1(ntraciso,len,nd)
193	real qp1(len,nd),xtp1(ntraciso,len,nd)
194	real fq_detrainement1(len,nd)
195	real f_detrainement1(len,nd)
196	real q_detrainement1(len,nd)
197	real fq_ddft1(len,nd)
198	real fq_fluxmasse1(len,nd)
199	real fq_evapprecip1(len,nd)
200	real fxt_detrainement1(ntraciso,len,nd)
201	real xt_detrainement1(ntraciso,len,nd)
202	real fxt_ddft1(ntraciso,len,nd)
203	real fxt_fluxmasse1(ntraciso,len,nd)
204	real fxt_evapprecip1(ntraciso,len,nd)
205	#endif
206	#ifdef ISOVERIF
207	real deltaD
208	#endif
209	#endif
210
211	! -------------------------------------------------------------------
212	! Original Prologue by Kerry Emanuel.
213	! -------------------------------------------------------------------
214	! --- ARGUMENTS
215	! -------------------------------------------------------------------
216	! --- On input:
217
218	! t: Array of absolute temperature (K) of dimension ND, with first
219	! index corresponding to lowest model level. Note that this array
220	! will be altered by the subroutine if dry convective adjustment
221	! occurs and if IPBL is not equal to 0.
222
223	! q: Array of specific humidity (gm/gm) of dimension ND, with first
224	! index corresponding to lowest model level. Must be defined
225	! at same grid levels as T. Note that this array will be altered
226	! if dry convective adjustment occurs and if IPBL is not equal to 0.
227
228	! qs: Array of saturation specific humidity of dimension ND, with first
229	! index corresponding to lowest model level. Must be defined
230	! at same grid levels as T. Note that this array will be altered
231	! if dry convective adjustment occurs and if IPBL is not equal to 0.
232
233	! u: Array of zonal wind velocity (m/s) of dimension ND, witth first
234	! index corresponding with the lowest model level. Defined at
235	! same levels as T. Note that this array will be altered if
236	! dry convective adjustment occurs and if IPBL is not equal to 0.
237
238	! v: Same as u but for meridional velocity.
239
240	! tra: Array of passive tracer mixing ratio, of dimensions (ND,NTRA),
241	! where NTRA is the number of different tracers. If no
242	! convective tracer transport is needed, define a dummy
243	! input array of dimension (ND,1). Tracers are defined at
244	! same vertical levels as T. Note that this array will be altered
245	! if dry convective adjustment occurs and if IPBL is not equal to 0.
246
247	! p: Array of pressure (mb) of dimension ND, with first
248	! index corresponding to lowest model level. Must be defined
249	! at same grid levels as T.
250
251	! ph: Array of pressure (mb) of dimension ND+1, with first index
252	! corresponding to lowest level. These pressures are defined at
253	! levels intermediate between those of P, T, Q and QS. The first
254	! value of PH should be greater than (i.e. at a lower level than)
255	! the first value of the array P.
256
257	! nl: The maximum number of levels to which convection can penetrate, plus
258	! 1.
259	! NL MUST be less than or equal to ND-1.
260
261	! delt: The model time step (sec) between calls to CONVECT
262
263	! ----------------------------------------------------------------------------
264	! --- On Output:
265
266	! iflag: An output integer whose value denotes the following:
267	! VALUE INTERPRETATION
268	! ----- --------------
269	! 0 Moist convection occurs.
270	! 1 Moist convection occurs, but a CFL condition
271	! on the subsidence warming is violated. This
272	! does not cause the scheme to terminate.
273	! 2 Moist convection, but no precip because ep(inb) lt 0.0001
274	! 3 No moist convection because new cbmf is 0 and old cbmf is 0.
275	! 4 No moist convection; atmosphere is not
276	! unstable
277	! 6 No moist convection because ihmin le minorig.
278	! 7 No moist convection because unreasonable
279	! parcel level temperature or specific humidity.
280	! 8 No moist convection: lifted condensation
281	! level is above the 200 mb level.
282	! 9 No moist convection: cloud base is higher
283	! then the level NL-1.
284
285	! ft: Array of temperature tendency (K/s) of dimension ND, defined at
286	! same
287	! grid levels as T, Q, QS and P.
288
289	! fq: Array of specific humidity tendencies ((gm/gm)/s) of dimension ND,
290	! defined at same grid levels as T, Q, QS and P.
291
292	! fu: Array of forcing of zonal velocity (m/s^2) of dimension ND,
293	! defined at same grid levels as T.
294
295	! fv: Same as FU, but for forcing of meridional velocity.
296
297	! ftra: Array of forcing of tracer content, in tracer mixing ratio per
298	! second, defined at same levels as T. Dimensioned (ND,NTRA).
299
300	! precip: Scalar convective precipitation rate (mm/day).
301
302	! VPrecip: Vertical profile of convective precipitation (kg/m2/s).
303
304	! wd: A convective downdraft velocity scale. For use in surface
305	! flux parameterizations. See convect.ps file for details.
306
307	! tprime: A convective downdraft temperature perturbation scale (K).
308	! For use in surface flux parameterizations. See convect.ps
309	! file for details.
310
311	! qprime: A convective downdraft specific humidity
312	! perturbation scale (gm/gm).
313	! For use in surface flux parameterizations. See convect.ps
314	! file for details.
315
316	! cbmf: The cloud base mass flux ((kg/m**2)/s). THIS SCALAR VALUE MUST
317	! BE STORED BY THE CALLING PROGRAM AND RETURNED TO CONVECT AT
318	! ITS NEXT CALL. That is, the value of CBMF must be "remembered"
319	! by the calling program between calls to CONVECT.
320
321	! det: Array of detrainment mass flux of dimension ND.
322
323	! -------------------------------------------------------------------
324
325	! Local arrays
326
327
328	INTEGER i, k, n, il, j
329	INTEGER icbmax
330	INTEGER nk1(klon)
331	INTEGER icb1(klon)
332	INTEGER inb1(klon)
333	INTEGER icbs1(klon)
334
335	REAL plcl1(klon)
336	REAL tnk1(klon)
337	REAL qnk1(klon)
338	REAL gznk1(klon)
339	REAL pnk1(klon)
340	REAL qsnk1(klon)
341	REAL pbase1(klon)
342	REAL buoybase1(klon)
343
344	REAL lv1(klon, klev)
345	REAL cpn1(klon, klev)
346	REAL tv1(klon, klev)
347	REAL gz1(klon, klev)
348	REAL hm1(klon, klev)
349	REAL h1(klon, klev)
350	REAL tp1(klon, klev)
351	REAL tvp1(klon, klev)
352	REAL clw1(klon, klev)
353	REAL th1(klon, klev)
354
355	#ifdef ISO
356	integer ixt
357	real xtclw1(ntraciso,klon,klev)
358	REAL xtnk1(ntraciso,klon)
359	#endif
360
361	INTEGER ncum
362
363	! (local) compressed fields:
364
365	! ym integer nloc
366	! ym parameter (nloc=klon) ! pour l'instant
367	#define nloc klon
368	INTEGER idcum(nloc)
369	INTEGER iflag(nloc), nk(nloc), icb(nloc)
370	INTEGER nent(nloc, klev)
371	INTEGER icbs(nloc)
372	INTEGER inb(nloc), inbis(nloc)
373
374	REAL cbmf(nloc), plcl(nloc), tnk(nloc), qnk(nloc), gznk(nloc)
375	REAL t(nloc, klev), q(nloc, klev), qs(nloc, klev)
376	REAL u(nloc, klev), v(nloc, klev)
377	REAL gz(nloc, klev), h(nloc, klev), lv(nloc, klev), cpn(nloc, klev)
378	REAL p(nloc, klev), ph(nloc, klev+1), tv(nloc, klev), tp(nloc, klev)
379	REAL clw(nloc, klev)
380	REAL dph(nloc, klev)
381	REAL pbase(nloc), buoybase(nloc), th(nloc, klev)
382	REAL tvp(nloc, klev)
383	REAL sig(nloc, klev), w0(nloc, klev)
384	REAL hp(nloc, klev), ep(nloc, klev), sigp(nloc, klev)
385	REAL frac(nloc), buoy(nloc, klev)
386	REAL cape(nloc)
387	REAL m(nloc, klev), ment(nloc, klev, klev), qent(nloc, klev, klev)
388	REAL uent(nloc, klev, klev), vent(nloc, klev, klev)
389	REAL ments(nloc, klev, klev), qents(nloc, klev, klev)
390	REAL sij(nloc, klev, klev), elij(nloc, klev, klev)
391	REAL qp(nloc, klev), up(nloc, klev), vp(nloc, klev)
392	REAL wt(nloc, klev), water(nloc, klev), evap(nloc, klev)
393	REAL b(nloc, klev), ft(nloc, klev), fq(nloc, klev)
394	REAL fu(nloc, klev), fv(nloc, klev)
395	REAL upwd(nloc, klev), dnwd(nloc, klev), dnwd0(nloc, klev)
396	REAL ma(nloc, klev), mike(nloc, klev), tls(nloc, klev)
397	REAL tps(nloc, klev), qprime(nloc), tprime(nloc)
398	REAL precip(nloc)
399	REAL vprecip(nloc, klev+1)
400	REAL tra(nloc, klev, ntra), trap(nloc, klev, ntra)
401	REAL ftra(nloc, klev, ntra), traent(nloc, klev, klev, ntra)
402	REAL qcondc(nloc, klev) ! cld
403	REAL wd(nloc) ! gust
404
405	! RomP >>>
406	REAL da(nloc, klev), phi(nloc, klev, klev), mp(nloc, klev)
407	REAL epmlmmm(nloc, klev, klev), eplamm(nloc, klev)
408	REAL phi2(nloc, klev, klev)
409	REAL d1a(nloc, klev), dam(nloc, klev)
410	REAL wdtraina(nloc, klev), wdtrainm(nloc, klev)
411	REAL sigd(nloc)
412	! RomP <<<
413	REAL epmax_diag(nloc) ! epmax_cape
414	#ifdef ISO
415	real xt(ntraciso,nloc,klev)
416	real xtnk(ntraciso,nloc)
417	real xtclw(ntraciso,nloc,klev)
418	real xtp(ntraciso,nloc,klev)
419	real xtent(ntraciso,nloc,klev,klev)
420	real xtelij(ntraciso,nloc,klev,klev)
421	! real xtep(ntraciso,nloc,klev) ! le 7 mai: on supprime xtep
422	real xtwater(ntraciso,nloc,klev)
423	real xtevap(ntraciso,nloc,klev)
424	real fxt(ntraciso,nloc,klev)
425	real xtprecip(ntraciso,nloc)
426	real xtvprecip(ntraciso,nloc,klev+1)
427	real xtwdtraina(ntraciso,nloc,klev)
428	#ifdef DIAGISO
429	real fxt_detrainement(ntraciso,nloc,klev)
430	real fxt_fluxmasse(ntraciso,nloc,klev)
431	real fxt_evapprecip(ntraciso,nloc,klev)
432	real fxt_ddft(ntraciso,nloc,klev)
433	real fq_detrainement(nloc,klev)
434	real f_detrainement(nloc,klev)
435	real q_detrainement(nloc,klev)
436	real xt_detrainement(ntraciso,nloc,klev)
437	real fq_fluxmasse(nloc,klev)
438	real fq_evapprecip(nloc,klev)
439	real fq_ddft(nloc,klev)
440	#endif
441	#ifdef ISOTRAC
442	integer iiso,ixt_ddft,ixt_poubelle,ixt_revap
443	integer izone
444	!#ifdef ISOVERIF
445	! integer iso_verif_positif_nostop
446	!#endif
447	#endif
448	#endif
449
450
451	#ifdef ISO
452	! verif
453	#ifdef ISOVERIF
454	write(,) 'cv_driver 391: ENTREE dans cv_driver'
455	! write(,) 'nloc=',nloc
456	if (iso_eau.gt.0) then
457	do k = 1, klev
458	do i = 1, nloc
459	call iso_verif_egalite_choix(xt1(iso_eau,i,k),q1(i,k), &
460	& 'cv_driver 343',errmax,errmaxrel)
461	enddo
462	enddo
463	endif !if (iso_eau.gt.0) then
464	if (iso_HDO.gt.0) then
465	do k = 1, klev
466	do i = 1, nloc
467	if (q1(i,k).gt.ridicule) then
468	call iso_verif_aberrant(xt1(iso_hdo,i,k)/q1(i,k), &
469	& 'cv_driver 362')
470	endif !if (q1(i,k).gt.ridicule) then
471	enddo
472	enddo
473	endif !if (iso_eau.gt.0) then
474	#ifdef ISOTRAC
475	do k = 1, klev
476	do i = 1, klon
477	call iso_verif_traceur(xt1(1,i,k),'cv_driver 413')
478	enddo
479	enddo
480	#endif
481	#endif
482	! end verif
483	#endif
484
485
486	nent(:, :) = 0
487	! -------------------------------------------------------------------
488	! --- SET CONSTANTS AND PARAMETERS
489	! -------------------------------------------------------------------
490	! print *, '-> cv_driver' !jyg
491	! -- set simulation flags:
492	! (common cvflag)
493
494	CALL cv_flag(0)
495
496	! -- set thermodynamical constants:
497	! (common cvthermo)
498
499	CALL cv_thermo(iflag_con)
500
501	! -- set convect parameters
502
503	! includes microphysical parameters and parameters that
504	! control the rate of approach to quasi-equilibrium)
505	! (common cvparam)
506
507
508	IF (iflag_con==30) THEN
509	CALL cv30_param(nd, delt)
510	END IF
511
512	IF (iflag_con==4) THEN
513	CALL cv_param(nd)
514	#ifdef ISO
515	write(,) 'cv_driver 454: isos pas prevus ici'
516	stop
517	#endif
518	END IF
519
520	! ---------------------------------------------------------------------
521	! --- INITIALIZE OUTPUT ARRAYS AND PARAMETERS
522	! ---------------------------------------------------------------------
523
524	inb(:) = 0.0
525	inb1(:) = 0.0
526	icb1(:) = 0.0
527
528	ft1(:, :) = 0.0
529	fq1(:, :) = 0.0
530	fu1(:, :) = 0.0
531	fv1(:, :) = 0.0
532	tvp1(:, :) = 0.0
533	tp1(:, :) = 0.0
534	clw1(:, :) = 0.0
535	! ym
536	clw(:, :) = 0.0
537	gz1(:, :) = 0.
538	vprecip1(:, :) = 0.
539	ma1(:, :) = 0.0
540	upwd1(:, :) = 0.0
541	dnwd1(:, :) = 0.0
542	dnwd01(:, :) = 0.0
543	qcondc1(:, :) = 0.0
544
545	ftra1(:, :, :) = 0.0
546
547	elij1(:, :, :) = 0.0
548	sij1(:, :, :) = 0.0
549
550	precip1(:) = 0.0
551	iflag1(:) = 0
552	wd1(:) = 0.0
553	cape1(:) = 0.0
554	epmax_diag1(:) = 0.0 ! epmax_cape
555
556
557	#ifdef ISOVERIF
558	#ifdef ISOTRAC
559	do k=1,klev
560	do i=1,klon
561	call iso_verif_traceur(xt1(1,i,k),'cv_driver 510')
562	enddo
563	enddo
564	#endif
565	#endif
566
567	#ifdef ISO
568	fxt1(:,:,:)=0.0
569	xtclw1(:,:,:)=0.0
570	xtclw(:,:,:)=0.0
571	xtvprecip1(:,:,:) = 0.
572	xtelij1(:, :, :, :) = 0.0
573	#endif
574
575	IF (iflag_con==30) THEN
576	DO il = 1, len
577	sig1(il, nd) = sig1(il, nd) + 1.
578	sig1(il, nd) = amin1(sig1(il,nd), 12.1)
579	END DO
580	END IF
581
582	! RomP >>>
583	wdtraina1(:, :) = 0.
584	wdtrainm1(:, :) = 0.
585	da1(:, :) = 0.
586	phi1(:, :, :) = 0.
587	epmlmmm1(:, :, :) = 0.
588	eplamm1(:, :) = 0.
589	mp1(:, :) = 0.
590	evap1(:, :) = 0.
591	ep1(:, :) = 0.
592	sij1(:, :, :) = 0.
593	elij1(:, :, :) = 0.
594	phi21(:, :, :) = 0.
595	d1a1(:, :) = 0.
596	dam1(:, :) = 0.
597	! RomP <<<
598	#ifdef ISO
599	xtwdtraina1(:,:,:)=0.0
600	xtevap1(:,:,:)=0.0
601	xtelij1(:,:,:,:)=0.0
602	#ifdef DIAGISO
603	xtwater1(:,:,:)=0.0
604	fxt_detrainement1(:,:,:)=0.0
605	xt_detrainement1(:,:,:)=0.0
606	fxt_ddft1(:,:,:)=0.0
607	fxt_fluxmasse1(:,:,:)=0.0
608	fxt_evapprecip1(:,:,:)=0.0
609	xtp1(:,:,:)=0.0
610	water1(:,:)=0.0
611	qp1(:,:)=0.0
612	fq_detrainement1(:,:)=0.0
613	fq_ddft1(:,:)=0.0
614	fq_fluxmasse1(:,:)=0.0
615	fq_evapprecip1(:,:)=0.0
616	#endif
617	#endif
618	! --------------------------------------------------------------------
619	! --- CALCULATE ARRAYS OF GEOPOTENTIAL, HEAT CAPACITY & STATIC ENERGY
620	! --------------------------------------------------------------------
621
622	IF (iflag_con==30) THEN
623
624	! print*,'Emanuel version 30 '
625	CALL cv30_prelim(len, nd, ndp1, t1, q1, p1, ph1 & ! nd->na
626	, lv1, cpn1, tv1, gz1, h1, hm1, th1)
627	END IF
628
629	IF (iflag_con==4) THEN
630	CALL cv_prelim(len, nd, ndp1, t1, q1, p1, ph1, lv1, cpn1, tv1, gz1, h1, &
631	hm1)
632	END IF
633
634	! --------------------------------------------------------------------
635	! --- CONVECTIVE FEED
636	! --------------------------------------------------------------------
637
638	IF (iflag_con==30) THEN
639	CALL cv30_feed(len, nd, t1, q1, qs1, p1, ph1, hm1, gz1 & !
640	! nd->na
641	, nk1, icb1, icbmax, iflag1, tnk1, qnk1, gznk1, plcl1 &
642	#ifdef ISO
643	,xt1,xtnk1 &
644	#endif
645	)
646	END IF
647
648	IF (iflag_con==4) THEN
649	CALL cv_feed(len, nd, t1, q1, qs1, p1, hm1, gz1, nk1, icb1, icbmax, &
650	iflag1, tnk1, qnk1, gznk1, plcl1)
651	END IF
652
653	! --------------------------------------------------------------------
654	! --- UNDILUTE (ADIABATIC) UPDRAFT / 1st part
655	! (up through ICB for convect4, up through ICB+1 for convect3)
656	! Calculates the lifted parcel virtual temperature at nk, the
657	! actual temperature, and the adiabatic liquid water content.
658	! --------------------------------------------------------------------
659
660	IF (iflag_con==30) THEN
661
662	#ifdef ISOVERIF
663	write(,) 'cv_driver 593: avant cv3_undilute1'
664	do k=1,klev
665	do i=1,klon
666	if (iso_HDO.gt.0) then
667	if (q1(i,k).gt.ridicule) then
668	call iso_verif_aberrant(xt1(iso_hdo,i,k)/q1(i,k), &
669	& 'cv_driver 502')
670	endif ! if (q1(i,k).gt.ridicule) then
671	endif !if (iso_HDO.gt.0) then
672	#ifdef ISOTRAC
673	call iso_verif_traceur(xt1(1,i,k),'cv_driver 601')
674	#endif
675	enddo
676	enddo
677	#endif
678
679
680	CALL cv30_undilute1(len, nd, t1, q1, qs1, gz1, plcl1, p1, nk1, icb1 & ! nd->na
681	, tp1, tvp1, clw1, icbs1 &
682	#ifdef ISO
683	& ,xt1,xtclw1 &
684	#endif
685	& )
686
687
688	#ifdef ISO
689	!c--debug
690	#ifdef ISOVERIF
691	write(,) 'cv_driver 621: apres cv3_undilute1'
692	do k = 1, klev
693	do i = 1, klon
694	if (iso_eau.gt.0) then
695	call iso_verif_egalite_choix(xtclw1(iso_eau,i,k),clw1(i,k), &
696	& 'undil1',errmax,errmaxrel)
697	call iso_verif_egalite_choix(xt1(iso_eau,i,k),q1(i,k), &
698	& 'undil1',errmax,errmaxrel)
699	endif !if (iso_eau.gt.0) then
700	#ifdef ISOTRAC
701	call iso_verif_traceur(xt1(1,i,k),'cv_driver 623')
702	#endif
703	enddo
704	enddo
705	#endif
706	!write(,) 'SORTIE DE CV3_UNDILUTE1'
707	#endif
708
709	END IF
710
711	IF (iflag_con==4) THEN
712	CALL cv_undilute1(len, nd, t1, q1, qs1, gz1, p1, nk1, icb1, icbmax, tp1, &
713	tvp1, clw1)
714	END IF
715
716	! -------------------------------------------------------------------
717	! --- TRIGGERING
718	! -------------------------------------------------------------------
719
720	IF (iflag_con==30) THEN
721	CALL cv30_trigger(len, nd, icb1, plcl1, p1, th1, tv1, tvp1 & !
722	! nd->na
723	, pbase1, buoybase1, iflag1, sig1, w01)
724	END IF
725
726	IF (iflag_con==4) THEN
727	CALL cv_trigger(len, nd, icb1, cbmf1, tv1, tvp1, iflag1)
728	END IF
729
730	! =====================================================================
731	! --- IF THIS POINT IS REACHED, MOIST CONVECTIVE ADJUSTMENT IS NECESSARY
732	! =====================================================================
733
734	ncum = 0
735	DO i = 1, len
736	IF (iflag1(i)==0) THEN
737	ncum = ncum + 1
738	idcum(ncum) = i
739	END IF
740	END DO
741
742	! print*,'cv_driver : klon, ncum = ',len,ncum
743
744	IF (ncum>0) THEN
745
746	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
747	! --- COMPRESS THE FIELDS
748	! (-> vectorization over convective gridpoints)
749	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
750
751	IF (iflag_con==30) THEN
752	#ifdef ISO
753	#ifdef ISOVERIF
754	!write(,) 'xt1(iso_eau,1,1),q1(1,1)=',xt1(iso_eau,1,1),q1(1,1)
755	!write(,) 'xt1(iso_eau,14,1),q1(14,1)=',xt1(iso_eau,14,1),q1(14,1)
756	do k = 1, klev
757	do i = 1, nloc
758	if (iso_eau.gt.0) then
759	call iso_verif_egalite_choix(xtclw1(iso_eau,i,k),clw1(i,k), &
760	& 'cv_driver 541a',errmax,errmaxrel)
761	call iso_verif_egalite_choix(xt1(iso_eau,i,k),q1(i,k), &
762	& 'cv_driver 541b',errmax,errmaxrel)
763	endif ! if (iso_eau.gt.0) then
764	#ifdef ISOTRAC
765	call iso_verif_traceur(xt1(1,i,k),'cv_driver 689')
766	#endif
767	enddo
768	enddo
769	#endif
770	#endif
771
772	CALL cv30_compress(len, nloc, ncum, nd, ntra, iflag1, nk1, icb1, icbs1, &
773	plcl1, tnk1, qnk1, gznk1, pbase1, buoybase1, t1, q1, qs1, u1, v1, &
774	gz1, th1, tra1, h1, lv1, cpn1, p1, ph1, tv1, tp1, tvp1, clw1, sig1, &
775	w01, iflag, nk, icb, icbs, plcl, tnk, qnk, gznk, pbase, buoybase, t, &
776	q, qs, u, v, gz, th, tra, h, lv, cpn, p, ph, tv, tp, tvp, clw, sig, &
777	w0 &
778	#ifdef ISO
779	& ,xtnk1,xt1,xtclw1 &
780	& ,xtnk,xt,xtclw &
781	#endif
782	& )
783
784	#ifdef ISO
785	#ifdef ISOVERIF
786	write(,) 'cv_driver 720: apres cv3_compress'
787	do k = 1, klev
788	do i = 1, ncum
789	if (iso_eau.gt.0) then
790	call iso_verif_egalite_choix(xtclw(iso_eau,i,k),clw(i,k), &
791	& 'cv_driver 598',errmax,errmaxrel)
792	call iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), &
793	& 'cv_driver 600',errmax,errmaxrel)
794	endif ! if (iso_eau.gt.0) then
795	if (iso_HDO.gt.0) then
796	call iso_verif_aberrant_choix( &
797	& xt(iso_HDO,i,k),q(i,k), &
798	& ridicule,deltalim,'cv_driver 735, apres compress')
799	endif !if (iso_HDO.gt.0) then
800	#ifdef ISOTRAC
801	call iso_verif_traceur(xt(1,i,k),'cv_driver 726')
802	#endif
803	enddo
804	enddo
805	if (iso_eau.gt.0) then
806	do i = 1, ncum
807	call iso_verif_egalite_choix(xtnk(iso_eau,i),qnk(i), &
808	& 'cv_driver 834',errmax,errmaxrel)
809	enddo
810	endif !if (iso_eau.gt.0) then
811	#endif
812	#endif
813
814	END IF
815
816	IF (iflag_con==4) THEN
817	CALL cv_compress(len, nloc, ncum, nd, iflag1, nk1, icb1, cbmf1, plcl1, &
818	tnk1, qnk1, gznk1, t1, q1, qs1, u1, v1, gz1, h1, lv1, cpn1, p1, ph1, &
819	tv1, tp1, tvp1, clw1, iflag, nk, icb, cbmf, plcl, tnk, qnk, gznk, t, &
820	q, qs, u, v, gz, h, lv, cpn, p, ph, tv, tp, tvp, clw, dph)
821	END IF
822
823	! -------------------------------------------------------------------
824	! --- UNDILUTE (ADIABATIC) UPDRAFT / second part :
825	! --- FIND THE REST OF THE LIFTED PARCEL TEMPERATURES
826	! --- &
827	! --- COMPUTE THE PRECIPITATION EFFICIENCIES AND THE
828	! --- FRACTION OF PRECIPITATION FALLING OUTSIDE OF CLOUD
829	! --- &
830	! --- FIND THE LEVEL OF NEUTRAL BUOYANCY
831	! -------------------------------------------------------------------
832
833	IF (iflag_con==30) THEN
834	CALL cv30_undilute2(nloc, ncum, nd, icb, icbs, nk & !na->nd
835	, tnk, qnk, gznk, t, q, qs, gz, p, h, tv, lv, pbase, buoybase, plcl, &
836	inb, tp, tvp, clw, hp, ep, sigp, buoy &
837	#ifdef ISO
838	& ,xtnk,xt,xtclw &
839	#endif
840	& )
841
842	#ifdef ISO
843	#ifdef ISOVERIF
844	write(,) 'cv_driver 863: apres call cv30_undilute2'
845	do k = 1, klev
846	do i = 1, ncum
847	if (iso_eau.gt.0) then
848	call iso_verif_egalite_choix(xtclw(iso_eau,i,k),clw(i,k), &
849	& 'cv_driver 650',errmax,errmaxrel)
850	call iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), &
851	& 'cv_driver 652',errmax,errmaxrel)
852	endif ! if (iso_eau.gt.0) then
853	if (iso_HDO.gt.0) then
854	call iso_verif_aberrant_choix( &
855	& xt(iso_HDO,i,k),q(i,k), &
856	& ridicule,deltalim,'cv_driver 794, apres undilute2')
857	endif !if (iso_HDO.gt.0) then
858	#ifdef ISOTRAC
859	call iso_verif_traceur(xt(1,i,k),'cv_driver 780trac')
860	call iso_verif_traceur(xtclw(1,i,k),'cv_driver 781trac')
861	#endif
862	enddo
863	enddo
864	#endif
865	!write(,) 'SORTIE CV3_UNDILUTE2'
866	#endif
867	END IF
868
869	IF (iflag_con==4) THEN
870	CALL cv_undilute2(nloc, ncum, nd, icb, nk, tnk, qnk, gznk, t, q, qs, &
871	gz, p, dph, h, tv, lv, inb, inbis, tp, tvp, clw, hp, ep, sigp, frac)
872	END IF
873
874	! -------------------------------------------------------------------
875	! --- CLOSURE
876	! -------------------------------------------------------------------
877
878	IF (iflag_con==30) THEN
879	CALL cv30_closure(nloc, ncum, nd, icb, inb & ! na->nd
880	, pbase, p, ph, tv, buoy, sig, w0, cape, m)
881
882	! epmax_cape
883	call cv30_epmax_fn_cape(nloc,ncum,nd &
884	,cape,ep,hp,icb,inb,clw,nk,t,h,lv &
885	,epmax_diag)
886	! on écrase ep et recalcule hp
887	END IF
888
889	IF (iflag_con==4) THEN
890	CALL cv_closure(nloc, ncum, nd, nk, icb, tv, tvp, p, ph, dph, plcl, &
891	cpn, iflag, cbmf)
892	END IF
893
894
895	! -------------------------------------------------------------------
896	! --- MIXING
897	! -------------------------------------------------------------------
898
899	IF (iflag_con==30) THEN
900	CALL cv30_mixing(nloc, ncum, nd, nd, ntra, icb, nk, inb & !
901	! na->nd
902	, ph, t, q, qs, u, v, tra, h, lv, qnk, hp, tv, tvp, ep, clw, m, sig, &
903	ment, qent, uent, vent, sij, elij, ments, qents, traent &
904	#ifdef ISO
905	& ,xt,xtnk,xtclw &
906	& ,xtent,xtelij &
907	#endif
908	& )
909
910
911	#ifdef ISO
912	#ifdef ISOVERIF
913	write(,) 'cv_driver 837: apres cv3_mixing'
914	do k = 1, klev
915	do j = 1, klev
916	do i = 1, ncum
917	if (iso_eau.gt.0) then
918	call iso_verif_egalite_choix(xtelij(iso_eau,i,j,k), &
919	& elij(i,j,k),'cv_driver 881',errmax,errmaxrel)
920	call iso_verif_egalite_choix(xtent(iso_eau,i,j,k), &
921	& qent(i,j,k),'cv_driver 882',errmax,errmaxrel)
922	endif ! if (iso_eau.gt.0) then
923	#ifdef ISOTRAC
924	call iso_verif_traceur_justmass(xtent(1,i,j,k), &
925	& 'cv_driver 846')
926	call iso_verif_traceur_justmass(xtelij(1,i,j,k), &
927	& 'cv_driver 847')
928	! on ne verifie pas le deltaD ici car peut depasser le seuil
929	! raisonable pour temperatures tres froides.
930	#endif
931	enddo
932	enddo
933	enddo !do k = 1, klev
934	do k = 1, klev
935	do i = 1, ncum
936	if (iso_eau.gt.0) then
937	call iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), &
938	& 'cv_driver 709',errmax,errmaxrel)
939	endif ! if (iso_eau.gt.0) then
940	#ifdef ISOTRAC
941	call iso_verif_traceur(xt(1,i,k),'cv_driver 856')
942	if (option_tmin.eq.1) then
943	if (iso_verif_positif_nostop(xtclw(itZonIso( &
944	& izone_cond,iso_eau),i,k)-xtclw(iso_eau,i,k) &
945	& ,'cv_driver 909').eq.1) then
946	write(,) 'i,k=',i,k
947	write(,) 'xtclw=',xtclw(:,i,k)
948	stop
949	endif !if (iso_verif_positif_nostop(xtclw(itZonIso(
950	endif !if ((option_traceurs.eq.17).or.
951	#endif
952	enddo
953	enddo !do k = 1, klev
954
955	#endif
956	#endif
957
958	END IF
959
960	IF (iflag_con==4) THEN
961	CALL cv_mixing(nloc, ncum, nd, icb, nk, inb, inbis, ph, t, q, qs, u, v, &
962	h, lv, qnk, hp, tv, tvp, ep, clw, cbmf, m, ment, qent, uent, vent, &
963	nent, sij, elij)
964	END IF
965
966	! -------------------------------------------------------------------
967	! --- UNSATURATED (PRECIPITATING) DOWNDRAFTS
968	! -------------------------------------------------------------------
969
970	IF (iflag_con==30) THEN
971
972	#ifdef ISO
973	#ifdef ISOVERIF
974	do k = 1, klev
975	do i = 1, ncum
976	if (iso_eau.gt.0) then
977	call iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), &
978	& 'cv_driver 753',errmax,errmaxrel)
979	endif ! if (iso_eau.gt.0) then
980	#ifdef ISOTRAC
981	call iso_verif_traceur(xt(1,i,k),'cv_driver 885')
982	#endif
983	enddo
984	enddo !do k = 1, klev
985	#endif
986	#endif
987
988	! RomP >>>
989	CALL cv30_unsat(nloc, ncum, nd, nd, ntra, icb, inb & ! na->nd
990	, t, q, qs, gz, u, v, tra, p, ph, th, tv, lv, cpn, ep, sigp, clw, m, &
991	ment, elij, delt, plcl, mp, qp, up, vp, trap, wt, water, evap, b, &
992	wdtraina, wdtrainm &
993	#ifdef ISO
994	& ,xt,xtclw,xtelij &
995	& ,xtp,xtwater,xtevap,xtwdtraina &
996	#endif
997	& )
998	! RomP <<<
999
1000	#ifdef ISO
1001	! write(,) 'klev=',klev
1002	#ifdef ISOVERIF
1003	write(,) 'cv_driver 930: apres cv3_unsat'
1004	do k = 1, klev
1005	do i = 1, ncum
1006	if (iso_eau.gt.0) then
1007	! write(,) 'i,k=',i,k
1008	call iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), &
1009	& 'cv_driver 778',errmax,errmaxrel)
1010	call iso_verif_egalite_choix(xtp(iso_eau,i,k), &
1011	& qp(i,k),'cv_driver 780',errmax,errmaxrel)
1012	call iso_verif_egalite_choix( &
1013	& xtwater(iso_eau,i,k),water(i,k), &
1014	& 'cv_driver 782',errmax,errmaxrel)
1015	call iso_verif_egalite_choix(xtevap(iso_eau,i,k), &
1016	& evap(i,k),'cv_driver 784',errmax,errmaxrel)
1017	endif ! if (iso_eau.gt.0) then
1018	#ifdef ISOTRAC
1019	call iso_verif_traceur(xt(1,i,k),'cv_driver 939')
1020	call iso_verif_traceur(xtp(1,i,k),'cv_driver 940')
1021	call iso_verif_traceur(xtwater(1,i,k),'cv_driver 941')
1022	call iso_verif_traceur_justmass(xtevap(1,i,k), &
1023	& 'cv_driver 942')
1024	if (bidouille_anti_divergence) then
1025	call iso_verif_traceur_pbidouille( &
1026	& xtp(1,i,k),'cv_driver 956')
1027	call iso_verif_traceur_pbidouille( &
1028	& xtwater(1,i,k),'cv_driver 958')
1029	endif
1030	#endif
1031	enddo !do i = 1, ncum
1032	enddo !do k = 1, klev
1033	#endif
1034	#endif
1035
1036	END IF
1037
1038	IF (iflag_con==4) THEN
1039	CALL cv_unsat(nloc, ncum, nd, inb, t, q, qs, gz, u, v, p, ph, h, lv, &
1040	ep, sigp, clw, m, ment, elij, iflag, mp, qp, up, vp, wt, water, evap)
1041	END IF
1042
1043
1044	#ifdef ISO
1045	#ifdef ISOTRAC
1046	if (option_traceurs.eq.6) then
1047	! on colorie les ddfts en rouge, le reste est en blanc.
1048	do k = 1, klev
1049	do i = 1, ncum
1050	do iiso=1,niso
1051	ixt_ddft=itZonIso(izone_ddft,iiso)
1052	ixt_poubelle=itZonIso(izone_poubelle,iiso)
1053	xtp(ixt_ddft,i,k)=xtp(ixt_ddft,i,k) &
1054	& +xtp(ixt_poubelle,i,k)
1055	xtp(ixt_poubelle,i,k)=0.0
1056	enddo !do iiso=1,niso
1057	#ifdef ISOVERIF
1058	call iso_verif_traceur(xtp(1,i,k),'cv_driver 990')
1059	#endif
1060	enddo !do i = 1, ncum
1061	enddo !do k = 1, klev
1062	else if (option_traceurs.eq.19) then
1063	! on colorie les ddfts, mais on sauve la revap
1064	do k = 1, klev
1065	do i = 1, ncum
1066	do izone=1,nzone
1067	if (izone.eq.izone_ddft) then
1068	do iiso=1,niso
1069	ixt_ddft=itZonIso(izone,iiso)
1070	ixt_revap=itZonIso(izone_revap,iiso)
1071	xtp(ixt_ddft,i,k)=xtp(iiso,i,k)-xtp(ixt_revap,i,k)
1072	enddo !do iiso=1,niso
1073	elseif (izone.eq.izone_ddft) then
1074	! rien a faire
1075	else !if (izone.eq.izone_ddft) then
1076	do iiso=1,niso
1077	ixt=itZonIso(izone,iiso)
1078	xtp(ixt,i,k)=0.0
1079	enddo !do iiso=1,niso
1080	endif !if (izone.eq.izone_ddft) then
1081	enddo !do izone=1,nzone
1082	#ifdef ISOVERIF
1083	call iso_verif_traceur(xtp(1,i,k),'cv_driver 1059')
1084	#endif
1085	enddo !do i = 1, ncum
1086	enddo !do k = 1, klev
1087	endif !if (option_traceurs.eq.6) then
1088	#endif
1089	#endif
1090
1091	! -------------------------------------------------------------------
1092	! --- YIELD
1093	! (tendencies, precipitation, variables of interface with other
1094	! processes, etc)
1095	! -------------------------------------------------------------------
1096
1097	IF (iflag_con==30) THEN
1098	CALL cv30_yield(nloc, ncum, nd, nd, ntra & ! na->nd
1099	, icb, inb, delt, t, q, u, v, tra, gz, p, ph, h, hp, lv, cpn, th, ep, &
1100	clw, m, tp, mp, qp, up, vp, trap, wt, water, evap, b, ment, qent, &
1101	uent, vent, nent, elij, traent, sig, tv, tvp, iflag, precip, vprecip, &
1102	ft, fq, fu, fv, ftra, upwd, dnwd, dnwd0, ma, mike, tls, tps, qcondc, &
1103	wd &
1104	#ifdef ISO
1105	& ,xt,xtclw,xtp,xtwater,xtevap &
1106	& ,xtent,xtelij,xtprecip,fxt,xtVPrecip &
1107	#ifdef DIAGISO
1108	& ,fq_detrainement,fq_ddft,fq_fluxmasse,fq_evapprecip &
1109	& ,fxt_detrainement,fxt_ddft,fxt_fluxmasse,fxt_evapprecip &
1110	& ,f_detrainement,q_detrainement,xt_detrainement &
1111	#endif
1112	#endif
1113	& )
1114
1115	#ifdef ISOVERIF
1116	DO k = 1, nd
1117	DO i = 1, ncum
1118	if (iso_eau.gt.0) then
1119	call iso_verif_egalite_choix(fxt(iso_eau,i,k), &
1120	& fq(i,k),'cv_driver 1086',errmax,errmaxrel)
1121	endif !if (iso_HDO.gt.0) then
1122	if (iso_HDO.gt.0) then
1123	if (q(i,k).gt.ridicule) then
1124	call iso_verif_aberrant( &
1125	& (xt(iso_HDO,i,k)+delt*fxt(iso_HDO,i,k)) &
1126	& /(q(i,k)+delt*fq(i,k)),'cv_driver 855')
1127	endif
1128	endif
1129	#ifdef ISOTRAC
1130	call iso_verif_traceur(xt(1,i,k),'cv_driver 1008')
1131	#endif
1132	enddo
1133	enddo
1134	#endif
1135
1136	END IF
1137
1138	IF (iflag_con==4) THEN
1139	CALL cv_yield(nloc, ncum, nd, nk, icb, inb, delt, t, q, u, v, gz, p, &
1140	ph, h, hp, lv, cpn, ep, clw, frac, m, mp, qp, up, vp, wt, water, &
1141	evap, ment, qent, uent, vent, nent, elij, tv, tvp, iflag, wd, qprime, &
1142	tprime, precip, cbmf, ft, fq, fu, fv, ma, qcondc)
1143	END IF
1144
1145	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1146	! --- passive tracers
1147	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1148
1149	IF (iflag_con==30) THEN
1150	! RomP >>>
1151	CALL cv30_tracer(nloc, len, ncum, nd, nd, ment, sij, da, phi, phi2, &
1152	d1a, dam, ep, vprecip, elij, clw, epmlmmm, eplamm, icb, inb)
1153	! RomP <<<
1154	END IF
1155
1156	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1157	! --- UNCOMPRESS THE FIELDS
1158	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1159	! set iflag1 =42 for non convective points
1160	DO i = 1, len
1161	iflag1(i) = 42
1162	END DO
1163
1164	IF (iflag_con==30) THEN
1165	CALL cv30_uncompress(nloc, len, ncum, nd, ntra, idcum, iflag, precip, &
1166	vprecip, evap, ep, sig, w0 & !RomP
1167	, ft, fq, fu, fv, ftra, inb, ma, upwd, dnwd, dnwd0, qcondc, wd, cape, &
1168	da, phi, mp, phi2, d1a, dam, sij & !RomP
1169	, elij, clw, epmlmmm, eplamm & !RomP
1170	, wdtraina, wdtrainm,epmax_diag & !RomP
1171	, iflag1, precip1, vprecip1, evap1, ep1, sig1, w01 & !RomP
1172	, ft1, fq1, fu1, fv1, ftra1, inb1, ma1, upwd1, dnwd1, dnwd01, &
1173	qcondc1, wd1, cape1, da1, phi1, mp1, phi21, d1a1, dam1, sij1 & !RomP
1174	, elij1, clw1, epmlmmm1, eplamm1 & !RomP
1175	, wdtraina1, wdtrainm1,epmax_diag1 & !RomP
1176	#ifdef ISO
1177	& ,xtprecip,fxt,xtVPrecip,xtevap,xtclw,xtwdtraina &
1178	& ,xtprecip1,fxt1,xtVPrecip1,xtevap1,xtclw1,xtwdtraina1 &
1179	#ifdef DIAGISO
1180	& , water,xtwater,qp,xtp &
1181	& , fq_detrainement,fq_ddft,fq_fluxmasse,fq_evapprecip &
1182	& , fxt_detrainement,fxt_ddft,fxt_fluxmasse, fxt_evapprecip &
1183	& , f_detrainement,q_detrainement,xt_detrainement &
1184	& , water1,xtwater1,qp1,xtp1 &
1185	& , fq_detrainement1,fq_ddft1,fq_fluxmasse1,fq_evapprecip1 &
1186	& , fxt_detrainement1,fxt_ddft1,fxt_fluxmasse1, fxt_evapprecip1 &
1187	& , f_detrainement1,q_detrainement1,xt_detrainement1 &
1188	#endif
1189	#endif
1190	& ) !RomP
1191
1192	#ifdef ISO
1193	#ifdef ISOVERIF
1194	DO k = 1, nd
1195	DO i = 1, len
1196	if (iso_eau.gt.0) then
1197	call iso_verif_egalite_choix(fxt1(iso_eau,i,k), &
1198	& fq1(i,k),'cv_driver 1170',errmax,errmaxrel)
1199	endif !if (iso_HDO.gt.0) then
1200	if (iso_HDO.gt.0) then
1201	if (q1(i,k).gt.ridicule) then
1202	call iso_verif_aberrant( &
1203	& (xt1(iso_HDO,i,k)+delt*fxt1(iso_HDO,i,k)) &
1204	& /(q1(i,k)+delt*fq1(i,k)),'cv_driver 2554')
1205	endif
1206	endif
1207	enddo !DO i = 1, len
1208	enddo !DO k = 1, nd
1209	#ifdef ISOTRAC
1210	call iso_verif_trac_masse_vect(fxt1,len,nd, &
1211	& 'cv_driver 1200',errmax,errmaxrel)
1212	#endif
1213	#endif
1214	#endif
1215
1216	END IF
1217
1218	IF (iflag_con==4) THEN
1219	CALL cv_uncompress(nloc, len, ncum, nd, idcum, iflag, precip, cbmf, ft, &
1220	fq, fu, fv, ma, qcondc, iflag1, precip1, cbmf1, ft1, fq1, fu1, fv1, &
1221	ma1, qcondc1)
1222	END IF
1223
1224	END IF ! ncum>0
1225
1226	! print *, 'fin cv_driver ->' !jyg
1227	RETURN
1228	END SUBROUTINE cv_driver
1229
1230	! ==================================================================
1231	SUBROUTINE cv_flag(iflag_ice_thermo)
1232
1233	USE cvthermo_mod_h
1234	USE cvflag_mod_h
1235	USE ioipsl_getin_p_mod, ONLY : getin_p
1236
1237	USE yomcst_mod_h
1238	IMPLICIT NONE
1239
1240	! Argument : iflag_ice_thermo : ice thermodynamics is taken into account if
1241	! iflag_ice_thermo >=1
1242	INTEGER iflag_ice_thermo
1243
1244
1245	! -- si .TRUE., on rend la gravite plus explicite et eventuellement
1246	! differente de 10.0 dans convect3:
1247	cvflag_grav = .TRUE.
1248	cvflag_ice = iflag_ice_thermo >= 1
1249	!
1250	! si icvflag_Tpa=0, alors la fraction de glace dans l'ascendance adiabatique est
1251	! fonction de la temperature de l'environnement et la temperature de l'ascendance est
1252	! calculee en deux iterations, une en supposant qu'il n'y a pas de glace et l'autre
1253	! en ajoutant la glace (ancien schema d'Arnaud Jam).
1254	! si icvflag_Tpa=1, alors la fraction de glace dans l'ascendance adiabatique est
1255	! fonction de la temperature de l'environnement et la temperature de l'ascendance est
1256	! calculee en une seule iteration.
1257	! si icvflag_Tpa=2, alors la fraction de glace dans l'ascendance adiabatique est
1258	! fonction de la temperature de l'ascendance et la temperature de l'ascendance est
1259	! calculee en une seule iteration.
1260	icvflag_Tpa=0
1261	call getin_p('icvflag_Tpa', icvflag_Tpa)
1262
1263	RETURN
1264	END SUBROUTINE cv_flag
1265
1266	! ==================================================================
1267	SUBROUTINE cv_thermo(iflag_con)
1268	USE yomcst_mod_h
1269	USE cvthermo_mod_h
1270	IMPLICIT NONE
1271
1272	! -------------------------------------------------------------
1273	! Set thermodynamical constants for convectL
1274	! -------------------------------------------------------------
1275
1276	INTEGER iflag_con
1277
1278
1279	! original set from convect:
1280	IF (iflag_con==4) THEN
1281	cpd = 1005.7
1282	cpv = 1870.0
1283	cl = 4190.0
1284	rrv = 461.5
1285	rrd = 287.04
1286	lv0 = 2.501E6
1287	g = 9.8
1288	t0 = 273.15
1289	grav = g
1290	ELSE
1291
1292	! constants consistent with LMDZ:
1293	cpd = rcpd
1294	cpv = rcpv
1295	cl = rcw
1296	ci = rcs
1297	rrv = rv
1298	rrd = rd
1299	lv0 = rlvtt
1300	lf0 = rlstt - rlvtt
1301	g = rg ! not used in convect3
1302	! ori t0 = RTT
1303	t0 = 273.15 ! convect3 (RTT=273.16)
1304	! maf grav= 10. ! implicitely or explicitely used in convect3
1305	grav = g ! implicitely or explicitely used in convect3
1306	END IF
1307
1308	rowl = 1000.0 !(a quelle variable de YOMCST cela correspond-il?)
1309
1310	clmcpv = cl - cpv
1311	clmcpd = cl - cpd
1312	clmci = cl - ci
1313	cpdmcp = cpd - cpv
1314	cpvmcpd = cpv - cpd
1315	cpvmcl = cl - cpv ! for convect3
1316	eps = rrd/rrv
1317	epsi = 1.0/eps
1318	epsim1 = epsi - 1.0
1319	! ginv=1.0/g
1320	ginv = 1.0/grav
1321	hrd = 0.5*rrd
1322
1323	RETURN
1324	END SUBROUTINE cv_thermo

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format