Context Navigation

concvl.F90 @ 4535

Last change on this file since 4535 was 4143, checked in by dcugnet, 2 years ago
Some variables are renamed or replaced by direct equivalents: iso_indnum -> tracers(:)%iso_iName niso_possibles -> niso iqiso -> iqIsoPha ; index_trac -> itZonIso ok_iso_verif -> isoCheck ntraceurs_zone -> nzone ; ntraciso -> ntiso qperemin -> min_qparent ; masseqmin -> min_qmass ; ratiomin -> min_ratio Some renamed variables are only aliased with the older name (using USE <module>, ONLY: <oldName> => <newName>) in routines where they are repeated many times. Few hard-coded indexes are now computed (examples: ilic, iso, ivap, irneb, iq_vap, iq_liq, iso_H2O, iso_HDO, iso_HTO, iso_O17, iso_O18). The IF(isoCheck) test is now embedded in the check_isotopes_seq and check_isotopes_loc routines (lighter calling).
Property svn:keywords set to `Id`
File size: 28.6 KB

Rev	Line
[3927]	1	SUBROUTINE concvl(iflag_clos, &
	2	dtime, paprs, pplay, k_upper_cv, &
	3	t, q, t_wake, q_wake, s_wake, u, v, tra, ntra, &
	4	Ale, Alp, sig1, w01, &
	5	d_t, d_q, d_u, d_v, d_tra, &
	6	rain, snow, kbas, ktop, sigd, &
	7	cbmf, plcl, plfc, wbeff, convoccur, &
	8	upwd, dnwd, dnwdbis, &
	9	Ma, mip, Vprecip, &
	10	cape, cin, tvp, Tconv, iflag, &
	11	pbase, bbase, dtvpdt1, dtvpdq1, dplcldt, dplcldr, &
	12	qcondc, wd, pmflxr, pmflxs, &
	13	!RomP >>>
	14	!! . da,phi,mp,dd_t,dd_q,lalim_conv,wght_th)
	15	da, phi, mp, phii, d1a, dam, sij, qta, clw, elij, &! RomP
	16	dd_t, dd_q, lalim_conv, wght_th, & ! RomP
	17	evap, ep, epmlmMm, eplaMm, & ! RomP
	18	wdtrainA, wdtrainS, wdtrainM, wght, qtc, sigt, &
	19	tau_cld_cv, coefw_cld_cv, & ! RomP+RL, AJ
	20	!RomP <<<
	21	epmax_diag & ! epmax_cape
	22	#ifdef ISO
	23	& ,xt,xt_wake,d_xt,xtrain,xtsnow &
	24	& ,xtVprecip,xtVprecipi &
	25	& ,xtclw,dd_xt,xtevap,xtwdtrainA &
	26	#ifdef DIAGISO
	27	& , qlp,xtlp,qvp,xtvp & ! juste diagnostique
	28	& , fq_detrainement,fq_ddft,fq_fluxmasse,fq_evapprecip &
	29	& , fxt_detrainement,fxt_ddft,fxt_fluxmasse,fxt_evapprecip &
	30	& , f_detrainement,q_detrainement,xt_detrainement &
	31	#endif
	32	#endif
	33	& ) ! **************************************************************
	34	! *
	35	! CONCVL *
	36	! *
	37	! *
	38	! written by : Sandrine Bony-Lena, 17/05/2003, 11.16.04 *
	39	! modified by : *
	40	! **************************************************************
	41
	42
	43	USE dimphy
	44	USE infotrac_phy, ONLY: nbtr
	45	#ifdef ISO
[4143]	46	USE infotrac_phy, ONLY: ntraciso=>ntiso
[3927]	47	USE isotopes_mod, ONLY: iso_eau, bidouille_anti_divergence, ridicule, &
	48	iso_eau,iso_HDO
	49	#endif
	50	#ifdef ISOVERIF
	51	USE isotopes_verif_mod, ONLY: errmax,errmaxrel, &
	52	iso_verif_egalite_choix,iso_verif_aberrant,iso_verif_egalite, &
	53	iso_verif_noNaN,iso_verif_aberrant_encadre
	54	#endif
	55	#ifdef ISOTRAC
	56	USE isotrac_routines_mod, only: iso_verif_traceur_jbid_vect
	57	#ifdef ISOVERIF
	58	USE isotopes_verif_mod, ONLY: iso_verif_traceur_vect, &
	59	& iso_verif_trac_masse_vect, iso_verif_traceur, &
	60	& iso_verif_traceur_justmass
	61	#endif
	62	#endif
	63	USE phys_local_var_mod, ONLY: omega
	64	USE print_control_mod, ONLY: prt_level, lunout
	65	IMPLICIT NONE
	66	! ======================================================================
	67	! Auteur(s): S. Bony-Lena (LMD/CNRS) date: ???
	68	! Objet: schema de convection de Emanuel (1991) interface
	69	! ======================================================================
	70	! Arguments:
	71	! dtime--input-R-pas d'integration (s)
	72	! s-------input-R-la vAleur "s" pour chaque couche
	73	! sigs----input-R-la vAleur "sigma" de chaque couche
	74	! sig-----input-R-la vAleur de "sigma" pour chaque niveau
	75	! psolpa--input-R-la pression au sol (en Pa)
	76	! pskapa--input-R-exponentiel kappa de psolpa
	77	! h-------input-R-enthAlpie potentielle (CpT/P*kappa)
	78	! q-------input-R-vapeur d'eau (en kg/kg)
	79
	80	! work*: input et output: deux variables de travail,
	81	! on peut les mettre a 0 au debut
	82	! ALE--------input-R-energie disponible pour soulevement
	83	! ALP--------input-R-puissance disponible pour soulevement
	84
	85	! d_h--------output-R-increment de l'enthAlpie potentielle (h)
	86	! d_q--------output-R-increment de la vapeur d'eau
	87	! rain-------output-R-la pluie (mm/s)
	88	! snow-------output-R-la neige (mm/s)
	89	! upwd-------output-R-saturated updraft mass flux (kg/m**2/s)
	90	! dnwd-------output-R-saturated downdraft mass flux (kg/m**2/s)
	91	! dnwd0------output-R-unsaturated downdraft mass flux (kg/m**2/s)
	92	! Ma---------output-R-adiabatic ascent mass flux (kg/m2/s)
	93	! mip--------output-R-mass flux shed by adiabatic ascent (kg/m2/s)
	94	! Vprecip----output-R-vertical profile of total precipitation (kg/m2/s)
	95	! Tconv------output-R-environment temperature seen by convective scheme (K)
	96	! Cape-------output-R-CAPE (J/kg)
	97	! Cin -------output-R-CIN (J/kg)
	98	! Tvp--------output-R-Temperature virtuelle d'une parcelle soulevee
	99	! adiabatiquement a partir du niveau 1 (K)
	100	! deltapb----output-R-distance entre LCL et base de la colonne (<0 ; Pa)
	101	! Ice_flag---input-L-TRUE->prise en compte de la thermodynamique de la glace
	102	! dd_t-------output-R-increment de la temperature du aux descentes precipitantes
	103	! dd_q-------output-R-increment de la vapeur d'eau du aux desc precip
	104	! lalim_conv-
	105	! wght_th----
	106	! evap-------output-R
	107	! ep---------output-R
	108	! epmlmMm----output-R
	109	! eplaMm-----output-R
	110	! wdtrainA---output-R
	111	! wdtrainS---output-R
	112	! wdtrainM---output-R
	113	! wght-------output-R
	114	! ======================================================================
	115
	116
	117	include "clesphys.h"
	118
	119	INTEGER, INTENT(IN) :: iflag_clos
	120	REAL, INTENT(IN) :: dtime
	121	REAL, DIMENSION(klon,klev), INTENT(IN) :: pplay
	122	REAL, DIMENSION(klon,klev+1), INTENT(IN) :: paprs
	123	INTEGER, INTENT(IN) :: k_upper_cv
	124	REAL, DIMENSION(klon,klev), INTENT(IN) :: t, q, u, v
	125	REAL, DIMENSION(klon,klev), INTENT(IN) :: t_wake, q_wake
	126	REAL, DIMENSION(klon), INTENT(IN) :: s_wake
	127	REAL, DIMENSION(klon,klev, nbtr),INTENT(IN) :: tra
	128	INTEGER, INTENT(IN) :: ntra
	129	REAL, DIMENSION(klon), INTENT(IN) :: Ale, Alp
	130	!CR:test: on passe lentr et alim_star des thermiques
	131	INTEGER, DIMENSION(klon), INTENT(IN) :: lalim_conv
	132	REAL, DIMENSION(klon,klev), INTENT(IN) :: wght_th
	133	#ifdef ISO
	134	REAL, DIMENSION(ntraciso,klon,klev), INTENT(IN) :: xt
	135	REAL, DIMENSION(ntraciso,klon,klev), INTENT(IN) :: xt_wake
	136	#endif
	137
	138	REAL, DIMENSION(klon,klev), INTENT(INOUT) :: sig1, w01
	139
	140	REAL, DIMENSION(klon,klev), INTENT(OUT) :: d_t, d_q, d_u, d_v
	141	REAL, DIMENSION(klon,klev, nbtr),INTENT(OUT) :: d_tra
	142	REAL, DIMENSION(klon), INTENT(OUT) :: rain, snow
	143
	144	INTEGER, DIMENSION(klon), INTENT(OUT) :: kbas, ktop
	145	REAL, DIMENSION(klon), INTENT(OUT) :: sigd
	146	REAL, DIMENSION(klon), INTENT(OUT) :: cbmf, plcl, plfc, wbeff
	147	REAL, DIMENSION(klon), INTENT(OUT) :: convoccur
	148	REAL, DIMENSION(klon,klev), INTENT(OUT) :: upwd, dnwd, dnwdbis
	149
	150	!! REAL Ma(klon,klev), mip(klon,klev),Vprecip(klon,klev) !jyg
	151	REAL, DIMENSION(klon,klev), INTENT(OUT) :: Ma, mip
	152	REAL, DIMENSION(klon,klev+1), INTENT(OUT) :: Vprecip !jyg
	153	REAL, DIMENSION(klon), INTENT(OUT) :: cape, cin
	154	REAL, DIMENSION(klon,klev), INTENT(OUT) :: tvp
	155	REAL, DIMENSION(klon,klev), INTENT(OUT) :: Tconv
	156	INTEGER, DIMENSION(klon), INTENT(OUT) :: iflag
	157	REAL, DIMENSION(klon), INTENT(OUT) :: pbase, bbase
	158	REAL, DIMENSION(klon,klev), INTENT(OUT) :: dtvpdt1, dtvpdq1
	159	REAL, DIMENSION(klon), INTENT(OUT) :: dplcldt, dplcldr
	160	REAL, DIMENSION(klon,klev), INTENT(OUT) :: qcondc
	161	REAL, DIMENSION(klon), INTENT(OUT) :: wd
	162	REAL, DIMENSION(klon,klev+1), INTENT(OUT) :: pmflxr, pmflxs
	163
	164	#ifdef ISO
	165	REAL, DIMENSION(ntraciso,klon,klev), INTENT(OUT) :: d_xt
	166	REAL, DIMENSION(ntraciso,klon), INTENT(OUT) :: xtrain
	167	REAL, DIMENSION(ntraciso,klon), INTENT(OUT) :: xtsnow
	168	REAL, DIMENSION(ntraciso,klon,klev+1), INTENT(OUT) :: xtVprecip
	169	#endif
	170
	171
	172	REAL, DIMENSION(klon,klev), INTENT(OUT) :: da, mp
	173	REAL, DIMENSION(klon,klev,klev),INTENT(OUT) :: phi
	174	! RomP >>>
	175	REAL, DIMENSION(klon,klev,klev),INTENT(OUT) :: phii
	176	REAL, DIMENSION(klon,klev), INTENT(OUT) :: d1a, dam
	177	REAL, DIMENSION(klon,klev,klev),INTENT(OUT) :: sij, elij
	178	REAL, DIMENSION(klon,klev), INTENT(OUT) :: qta
	179	REAL, DIMENSION(klon,klev), INTENT(OUT) :: clw
	180	REAL, DIMENSION(klon,klev), INTENT(OUT) :: dd_t, dd_q
	181	REAL, DIMENSION(klon,klev), INTENT(OUT) :: evap, ep
	182	REAL, DIMENSION(klon,klev), INTENT(OUT) :: eplaMm
	183	REAL, DIMENSION(klon,klev,klev), INTENT(OUT) :: epmlmMm
	184	REAL, DIMENSION(klon,klev), INTENT(OUT) :: wdtrainA, wdtrainS, wdtrainM
	185	! RomP <<<
	186	REAL, DIMENSION(klon,klev), INTENT(OUT) :: wght !RL
	187	REAL, DIMENSION(klon,klev), INTENT(OUT) :: qtc
	188	REAL, DIMENSION(klon,klev), INTENT(OUT) :: sigt
	189	REAL, INTENT(OUT) :: tau_cld_cv, coefw_cld_cv
	190	REAL, DIMENSION(klon), INTENT(OUT) :: epmax_diag ! epmax_cape
	191
	192	#ifdef ISO
	193	REAL, DIMENSION(ntraciso,klon,klev), INTENT(OUT) :: xtevap
	194	REAL, DIMENSION(ntraciso,klon,klev), INTENT(OUT) :: xtwdtrainA
	195	REAL, DIMENSION(ntraciso,klon,klev), INTENT(OUT) :: xtclw
	196	REAL, DIMENSION(ntraciso,klon,klev), INTENT(OUT) :: dd_xt
	197	! juste diagnostique
	198	#ifdef DIAGISO
	199	REAL, DIMENSION(klon,klev), INTENT(OUT) :: qlp
	200	REAL, DIMENSION(ntraciso,klon,klev), INTENT(OUT) :: xtlp
	201	REAL, DIMENSION(klon,klev), INTENT(OUT) :: qvp
	202	REAL, DIMENSION(ntraciso,klon,klev), INTENT(OUT) :: xtvp
	203	REAL, DIMENSION(klon,klev), INTENT(OUT) :: fq_detrainement
	204	REAL, DIMENSION(klon,klev), INTENT(OUT) :: fq_fluxmasse
	205	REAL, DIMENSION(klon,klev), INTENT(OUT) :: fq_ddft
	206	REAL, DIMENSION(klon,klev), INTENT(OUT) :: fq_evapprecip
	207	REAL, DIMENSION(ntraciso,klon,klev), INTENT(OUT) :: fxt_detrainement
	208	REAL, DIMENSION(ntraciso,klon,klev), INTENT(OUT) :: fxt_fluxmasse
	209	REAL, DIMENSION(ntraciso,klon,klev), INTENT(OUT) :: fxt_ddft
	210	REAL, DIMENSION(ntraciso,klon,klev), INTENT(OUT) :: fxt_evapprecip
	211	REAL, DIMENSION(klon,klev), INTENT(OUT) :: f_detrainement
	212	REAL, DIMENSION(klon,klev), INTENT(OUT) :: q_detrainement
	213	REAL, DIMENSION(ntraciso,klon,klev), INTENT(OUT) :: xt_detrainement
	214	#endif
	215	#endif
	216
	217
	218	!
	219	! Local
	220	! ----
	221	REAL, DIMENSION(klon,klev) :: em_p
	222	REAL, DIMENSION(klon,klev+1) :: em_ph
	223	REAL :: em_sig1feed ! sigma at lower bound of feeding layer
	224	REAL :: em_sig2feed ! sigma at upper bound of feeding layer
	225	REAL, DIMENSION(klev) :: em_wght ! weight density determining the feeding mixture
	226	REAL, DIMENSION(klon,klev+1) :: Vprecipi !jyg
	227	!on enleve le save
	228	! SAVE em_sig1feed,em_sig2feed,em_wght
	229
	230	REAL, DIMENSION(klon) :: rflag
	231	REAL, DIMENSION(klon) :: plim1, plim2
	232	REAL, DIMENSION(klon) :: ptop2
	233	REAL, DIMENSION(klon,klev) :: asupmax
	234	REAL, DIMENSION(klon) :: supmax0, asupmaxmin
	235	REAL :: zx_t, zdelta, zx_qs, zcor
	236	!
	237	! INTEGER iflag_mix
	238	! SAVE iflag_mix
	239	INTEGER :: noff, minorig
	240	INTEGER :: i,j, k, itra
	241	REAL, DIMENSION(klon,klev) :: qs, qs_wake
	242	!LF SAVE cbmf
	243	!IM/JYG REAL, SAVE, ALLOCATABLE :: cbmf(:)
	244	!!!$OMP THREADPRIVATE(cbmf)!
	245	REAL, DIMENSION(klon) :: cbmflast
	246	#ifdef ISO
	247	REAL, DIMENSION(ntraciso,klon,klev+1) :: xtVprecipi
	248	INTEGER :: ixt
	249	#endif
	250
	251
	252	! Variables supplementaires liees au bilan d'energie
	253	! Real paire(klon)
	254	!LF Real ql(klon,klev)
	255	! Save paire
	256	!LF Save ql
	257	!LF Real t1(klon,klev),q1(klon,klev)
	258	!LF Save t1,q1
	259	! Data paire /1./
	260	REAL, SAVE, ALLOCATABLE :: ql(:, :), q1(:, :), t1(:, :)
	261	!$OMP THREADPRIVATE(ql, q1, t1)
	262	! pas besoin d'isos ici
	263
	264	! Variables liees au bilan d'energie et d'enthAlpi
	265	REAL ztsol(klon)
	266	REAL h_vcol_tot, h_dair_tot, h_qw_tot, h_ql_tot, &
	267	h_qs_tot, qw_tot, ql_tot, qs_tot, ec_tot
	268	SAVE h_vcol_tot, h_dair_tot, h_qw_tot, h_ql_tot, &
	269	h_qs_tot, qw_tot, ql_tot, qs_tot, ec_tot
	270	!$OMP THREADPRIVATE(h_vcol_tot, h_dair_tot, h_qw_tot, h_ql_tot)
	271	!$OMP THREADPRIVATE(h_qs_tot, qw_tot, ql_tot, qs_tot , ec_tot)
	272	REAL d_h_vcol, d_h_dair, d_qt, d_qw, d_ql, d_qs, d_ec
	273	REAL d_h_vcol_phy
	274	REAL fs_bound, fq_bound
	275	SAVE d_h_vcol_phy
	276	!$OMP THREADPRIVATE(d_h_vcol_phy)
	277	REAL zero_v(klon)
	278	CHARACTER *15 ztit
	279	INTEGER ip_ebil ! PRINT level for energy conserv. diag.
	280	SAVE ip_ebil
	281	DATA ip_ebil/2/
	282	!$OMP THREADPRIVATE(ip_ebil)
	283	INTEGER if_ebil ! level for energy conserv. dignostics
	284	SAVE if_ebil
	285	DATA if_ebil/2/
	286	!$OMP THREADPRIVATE(if_ebil)
	287	!+jld ec_conser
	288	REAL d_t_ec(klon, klev) ! tendance du a la conersion Ec -> E thermique
	289	REAL zrcpd
	290	!-jld ec_conser
	291	!LF
	292	INTEGER nloc
	293	LOGICAL, SAVE :: first = .TRUE.
	294	!$OMP THREADPRIVATE(first)
	295	INTEGER, SAVE :: itap, igout
	296	!$OMP THREADPRIVATE(itap, igout)
	297
	298
	299	include "YOMCST.h"
	300	include "YOMCST2.h"
	301	include "YOETHF.h"
	302	include "FCTTRE.h"
	303	!jyg<
	304	include "conema3.h"
	305	!>jyg
	306
	307	IF (first) THEN
	308	! Allocate some variables LF 04/2008
	309
	310	!IM/JYG allocate(cbmf(klon))
	311	ALLOCATE (ql(klon,klev))
	312	ALLOCATE (t1(klon,klev))
	313	ALLOCATE (q1(klon,klev))
	314	!
	315	convoccur(:) = 0.
	316	!
	317	itap = 0
	318	igout = klon/2 + 1/klon
	319	END IF
	320	! Incrementer le compteur de la physique
	321	itap = itap + 1
	322
	323	! Copy T into Tconv
	324	DO k = 1, klev
	325	DO i = 1, klon
	326	Tconv(i, k) = t(i, k)
	327	END DO
	328	END DO
	329
	330	IF (if_ebil>=1) THEN
	331	DO i = 1, klon
	332	ztsol(i) = t(i, 1)
	333	zero_v(i) = 0.
	334	DO k = 1, klev
	335	ql(i, k) = 0.
	336	END DO
	337	END DO
	338	END IF
	339
	340	! ym
	341	snow(:) = 0
	342	#ifdef ISO
	343	xtsnow(:,:)=0
	344	#endif
	345
	346	IF (first) THEN
	347	first = .FALSE.
	348
	349	! ===========================================================================
	350	! READ IN PARAMETERS FOR THE CLOSURE AND THE MIXING DISTRIBUTION
	351	! ===========================================================================
	352
	353	IF (iflag_con==3) THEN
	354	! CALL cv3_inicp()
	355	CALL cv3_inip()
	356	END IF
	357
	358	! ===========================================================================
	359	! READ IN PARAMETERS FOR CONVECTIVE INHIBITION BY TROPOS. DRYNESS
	360	! ===========================================================================
	361
	362	! c$$$ open (56,file='supcrit.data')
	363	! c$$$ read (56,*) Supcrit1, Supcrit2
	364	! c$$$ close (56)
	365
	366	IF (prt_level>=10) WRITE (lunout, *) 'supcrit1, supcrit2', supcrit1, supcrit2
	367
	368	! ===========================================================================
	369	! Initialisation pour les bilans d'eau et d'energie
	370	! ===========================================================================
	371	IF (if_ebil>=1) d_h_vcol_phy = 0.
	372
	373	DO i = 1, klon
	374	cbmf(i) = 0.
	375	!! plcl(i) = 0.
	376	sigd(i) = 0.
	377	END DO
	378	END IF !(first)
	379
	380	! Initialisation a chaque pas de temps
	381	plfc(:) = 0.
	382	wbeff(:) = 100.
	383	plcl(:) = 0.
	384
	385	DO k = 1, klev + 1
	386	DO i = 1, klon
	387	em_ph(i, k) = paprs(i, k)/100.0
	388	pmflxr(i, k) = 0.
	389	pmflxs(i, k) = 0.
	390	END DO
	391	END DO
	392
	393	DO k = 1, klev
	394	DO i = 1, klon
	395	em_p(i, k) = pplay(i, k)/100.0
	396	END DO
	397	END DO
	398
	399
	400	! Feeding layer
	401
	402	em_sig1feed = 1.
	403	!jyg<
	404	! em_sig2feed = 0.97
	405	em_sig2feed = cvl_sig2feed
	406	!>jyg
	407	! em_sig2feed = 0.8
	408	! Relative Weight densities
	409	DO k = 1, klev
	410	em_wght(k) = 1.
	411	END DO
	412	!CRtest: couche alim des tehrmiques ponderee par a*
	413	! DO i = 1, klon
	414	! do k=1,lalim_conv(i)
	415	! em_wght(k)=wght_th(i,k)
	416	! print*,'em_wght=',em_wght(k),wght_th(i,k)
	417	! end do
	418	! END DO
	419
	420	IF (iflag_con==4) THEN
	421	DO k = 1, klev
	422	DO i = 1, klon
	423	zx_t = t(i, k)
	424	zdelta = max(0., sign(1.,rtt-zx_t))
	425	zx_qs = min(0.5, r2es*foeew(zx_t,zdelta)/em_p(i,k)/100.0)
	426	zcor = 1./(1.-retv*zx_qs)
	427	qs(i, k) = zx_qs*zcor
	428	END DO
	429	DO i = 1, klon
	430	zx_t = t_wake(i, k)
	431	zdelta = max(0., sign(1.,rtt-zx_t))
	432	zx_qs = min(0.5, r2es*foeew(zx_t,zdelta)/em_p(i,k)/100.0)
	433	zcor = 1./(1.-retv*zx_qs)
	434	qs_wake(i, k) = zx_qs*zcor
	435	END DO
	436	END DO
	437	ELSE ! iflag_con=3 (modif de puristes qui fait la diffce pour la convergence numerique)
	438	DO k = 1, klev
	439	DO i = 1, klon
	440	zx_t = t(i, k)
	441	zdelta = max(0., sign(1.,rtt-zx_t))
	442	zx_qs = r2es*foeew(zx_t, zdelta)/em_p(i, k)/100.0
	443	zx_qs = min(0.5, zx_qs)
	444	zcor = 1./(1.-retv*zx_qs)
	445	zx_qs = zx_qs*zcor
	446	qs(i, k) = zx_qs
	447	END DO
	448	DO i = 1, klon
	449	zx_t = t_wake(i, k)
	450	zdelta = max(0., sign(1.,rtt-zx_t))
	451	zx_qs = r2es*foeew(zx_t, zdelta)/em_p(i, k)/100.0
	452	zx_qs = min(0.5, zx_qs)
	453	zcor = 1./(1.-retv*zx_qs)
	454	zx_qs = zx_qs*zcor
	455	qs_wake(i, k) = zx_qs
	456	END DO
	457	END DO
	458	END IF ! iflag_con
	459
	460	! ------------------------------------------------------------------
	461
	462	! Main driver for convection:
	463	! iflag_con=3 -> nvlle version de KE (JYG)
	464	! iflag_con = 30 -> equivAlent to convect3
	465	! iflag_con = 4 -> equivAlent to convect1/2
	466
	467
	468	IF (iflag_con==30) THEN
	469
	470
	471	#ifdef ISO
	472	#ifdef ISOVERIF
	473	do k = 1, klev
	474	do i = 1, klon
	475	do ixt=1,ntraciso
	476	call iso_verif_noNaN(xt(ixt,i,k),'concvl 394')
	477	enddo
	478	enddo !do i = 1, klon
	479	enddo !do k = 1, klev
	480	if (iso_eau.gt.0) then
	481	do k = 1, klev
	482	do i = 1, klon
	483	call iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), &
	484	& 'concvl 174',errmax,errmaxrel)
	485	enddo !do i = 1, klon
	486	enddo !do k = 1, klev
	487	endif !if (iso_eau.gt.0) then
	488	if (iso_HDO.gt.0) then
	489	do k = 1, klev
	490	do i = 1, klon
	491	if (q(i,k).gt.ridicule) then
	492	call iso_verif_aberrant(xt(iso_hdo,i,k)/q(i,k),'concvl 175')
	493	endif ! if (q(i,k).gt.ridicule) then
	494	enddo
	495	enddo
	496	endif !if (iso_eau.gt.0) then
	497	#ifdef ISOTRAC
	498	do k = 1, klev
	499	do i = 1, klon
	500	call iso_verif_traceur(xt(1,i,k),'concvl 218')
	501	enddo
	502	enddo
	503	#endif
	504	write(,) 'concvl 170: avant appel cv_driver'
	505	#endif
	506	! ISOVERIF ! end verif
	507	#endif
	508
	509	! print *, '-> cv_driver' !jyg
	510	CALL cv_driver(klon, klev, klevp1, ntra, iflag_con, &
	511	t, q, qs, u, v, tra, &
	512	em_p, em_ph, iflag, &
	513	d_t, d_q, d_u, d_v, d_tra, rain, &
	514	Vprecip, cbmf, sig1, w01, & !jyg
	515	kbas, ktop, &
	516	dtime, Ma, upwd, dnwd, dnwdbis, qcondc, wd, cape, &
	517	da, phi, mp, phii, d1a, dam, sij, clw, elij, & !RomP
	518	evap, ep, epmlmMm, eplaMm, & !RomP
	519	wdtrainA, wdtrainM, & !RomP
	520	epmax_diag & ! epmax_cape
	521	#ifdef ISO
	522	& , xt,d_xt &
	523	& , xtrain,xtVprecip &
	524	& , xtevap,xtclw,xtwdtrainA &
	525	#ifdef DIAGISO
	526	& , qlp,xtlp,qvp,xtvp & ! juste diagnostique
	527	& , fq_detrainement,fq_ddft,fq_fluxmasse,fq_evapprecip &
	528	& , fxt_detrainement,fxt_ddft,fxt_fluxmasse,fxt_evapprecip &
	529	& , f_detrainement,q_detrainement,xt_detrainement &
	530	#endif
	531	#endif
	532	& )
	533	! print *, 'cv_driver ->' !jyg
	534
	535	#ifdef ISO
	536	! verif
	537	#ifdef ISOVERIF
	538	write(,) 'concvl 463: après appel cv_driver'
	539	do k = 1, klev
	540	do i = 1, klon
	541	if (iso_eau.gt.0) then
	542	call iso_verif_egalite(xt(iso_eau,i,k),q(i,k),'concvl 203')
	543	call iso_verif_egalite(xt_wake(iso_eau,i,k),q_wake(i,k),'concvl 204')
	544	call iso_verif_egalite(d_xt(iso_eau,i,k),d_q(i,k), &
	545	& 'concvl 452')
	546	endif !if (iso_eau.gt.0) then
	547	#ifdef DIAGISO
	548	do ixt=1,ntraciso
	549	call iso_verif_noNaN(xt(ixt,i,k),'concvl 460')
	550	call iso_verif_noNaN(xtlp(ixt,i,k),'concvl 295')
	551	call iso_verif_noNaN(xtvp(ixt,i,k),'concvl 260')
	552	enddo
	553	#endif
	554	enddo
	555	enddo
	556	#ifdef ISOTRAC
	557	call iso_verif_traceur_vect(xt,klon,klev,'concvl 218')
	558	call iso_verif_trac_masse_vect(d_xt,klon,klev, &
	559	& 'concvl 464',errmax,errmaxrel)
	560	#endif
	561	#endif
	562	! end verif
	563	#endif
	564
	565	DO i = 1, klon
	566	cbmf(i) = Ma(i, kbas(i))
	567	END DO
	568
	569	!RL
	570	wght(:, :) = 0.
	571	DO i = 1, klon
	572	wght(i, 1) = 1.
	573	END DO
	574	!RL
	575
	576	ELSE
	577
	578	!LF necessary for gathered fields
	579	nloc = klon
	580	#ifdef ISOVERIF
	581	write(,) 'concvl 581: juste avant appel de cva_driver'
	582	#endif
	583	CALL cva_driver(klon, klev, klev+1, ntra, nloc, k_upper_cv, &
	584	iflag_con, iflag_mix, iflag_ice_thermo, &
	585	iflag_clos, ok_conserv_q, dtime, cvl_comp_threshold, &
	586	t, q, qs, t_wake, q_wake, qs_wake, s_wake, u, v, tra, &
	587	em_p, em_ph, &
	588	Ale, Alp, omega, &
	589	em_sig1feed, em_sig2feed, em_wght, &
	590	iflag, d_t, d_q, d_u, d_v, d_tra, rain, kbas, ktop, &
	591	cbmf, plcl, plfc, wbeff, sig1, w01, ptop2, sigd, &
	592	Ma, mip, Vprecip, Vprecipi, upwd, dnwd, dnwdbis, qcondc, wd, &
	593	cape, cin, tvp, &
	594	dd_t, dd_q, plim1, plim2, asupmax, supmax0, &
	595	asupmaxmin, lalim_conv, &
	596	!AC!+!RomP+jyg
	597	!! da,phi,mp,phii,d1a,dam,sij,clw,elij, & ! RomP
	598	!! evap,ep,epmlmMm,eplaMm, ! RomP
	599	da, phi, mp, phii, d1a, dam, sij, wght, & ! RomP+RL
	600	qta, clw, elij, evap, ep, epmlmMm, eplaMm, & ! RomP+RL
	601	wdtrainA, wdtrainS, wdtrainM, qtc, sigt, &
	602	tau_cld_cv, coefw_cld_cv, & ! RomP,AJ
	603	!AC!+!RomP+jyg
	604	epmax_diag & ! epmax_cape
	605	#ifdef ISO
	606	& ,xt,xt_wake,d_xt, xtrain &
	607	& ,xtvprecip,xtvprecipi &
	608	& ,xtclw,dd_xt,xtevap,xtwdtrainA &
	609	#ifdef DIAGISO
	610	& , qlp,xtlp,qvp,xtvp &
	611	& , fq_detrainement,fq_ddft,fq_fluxmasse,fq_evapprecip &
	612	& , fxt_detrainement,fxt_ddft,fxt_fluxmasse,fxt_evapprecip &
	613	& , f_detrainement,q_detrainement,xt_detrainement &
	614	#endif
	615	#endif
	616	& )
	617	END IF
	618	! ------------------------------------------------------------------
	619	IF (prt_level>=10) WRITE (lunout, *) ' cva_driver -> cbmf,plcl,plfc,wbeff, d_t, d_q ', &
	620	cbmf(1), plcl(1), plfc(1), wbeff(1), d_t(1,1), d_q(1,1)
	621
	622	DO i = 1, klon
	623	rain(i) = rain(i)/86400.
	624	rflag(i) = iflag(i)
	625	#ifdef ISO
	626	do ixt = 1, ntraciso
	627	xtrain(ixt,i) = xtrain(ixt,i)/86400.
	628	enddo
	629	#endif
	630	END DO
	631
	632	DO k = 1, klev
	633	DO i = 1, klon
	634	d_t(i, k) = dtime*d_t(i, k)
	635	d_q(i, k) = dtime*d_q(i, k)
	636	d_u(i, k) = dtime*d_u(i, k)
	637	d_v(i, k) = dtime*d_v(i, k)
	638	#ifdef ISO
	639	do ixt = 1, ntraciso
	640	d_xt(ixt,i,k) = dtime*d_xt(ixt,i,k)
	641	enddo
	642	#endif
	643	END DO
	644	END DO
	645
	646
	647	#ifdef ISO
	648	#ifdef ISOVERIF
	649	! k=1
	650	! i= 538
	651	write(,) 'concvl 640'
	652	! write(,) 'q(i,k),d_q(i,k)=', q(i,k),d_q(i,k)
	653	! write(,) 'xt(iso_HDO,i,k),d_xt(iso_HDO,i,k)=', &
	654	! & xt(iso_HDO,i,k),d_xt(iso_HDO,i,k)
	655	DO k = 1, klev
	656	DO i = 1, klon
	657	if (iso_HDO.gt.0) then
	658	if (q(i,k).gt.ridicule) then
	659	call iso_verif_aberrant_encadre((xt(iso_HDO,i,k) &
	660	& +d_xt(iso_HDO,i,k))/(q(i,k)+d_q(i,k)),'concvl 250')
	661	endif !if (q_seri(i,k).gt.ridicule) then
	662	endif !if (iso_HDO.gt.0) then
	663	if (iso_eau.gt.0) then
	664	call iso_verif_egalite_choix(d_xt(iso_eau,i,k), &
	665	& d_q(i,k),'concvl 530',errmax*dtime,errmaxrel)
	666	endif !if (iso_HDO.gt.0) then
	667	#ifdef ISOTRAC
	668	call iso_verif_traceur_justmass(d_xt(1,i,k),'concvl 316')
	669	#endif
	670	END DO
	671	END DO
	672	#endif
	673	#endif
	674
	675	#ifdef ISO
	676	if ((iso_eau.gt.0).and.(bidouille_anti_divergence)) then
	677	do k=1,klev
	678	do i=1,klon
	679	d_xt(iso_eau,i,k)=d_q(i,k)
	680	enddo !do i=1,klon
	681	enddo !do k=1,klev
	682	#ifdef ISOTRAC
	683	call iso_verif_traceur_jbid_vect(d_xt, &
	684	& klon,klev)
	685	#endif
	686	endif !if ((iso_eau.gt.0).and.(bidouille_anti_divergence)) then
	687	#endif
	688
	689	IF (iflag_con==3) THEN
	690	DO i = 1,klon
	691	IF (wbeff(i) > 100. .OR. wbeff(i) == 0 .OR. iflag(i) > 3) THEN
	692	wbeff(i) = 0.
	693	convoccur(i) = 0.
	694	ELSE
	695	convoccur(i) = 1.
	696	ENDIF
	697	ENDDO
	698	ENDIF
	699
	700	IF (iflag_con==30) THEN
	701	DO itra = 1, ntra
	702	DO k = 1, klev
	703	DO i = 1, klon
	704	!RL! d_tra(i,k,itra) =dtime*d_tra(i,k,itra)
	705	d_tra(i, k, itra) = 0.
	706	END DO
	707	END DO
	708	END DO
	709	END IF
	710
	711	!!AC!
	712	IF (iflag_con==3) THEN
	713	DO itra = 1, ntra
	714	DO k = 1, klev
	715	DO i = 1, klon
	716	!RL! d_tra(i,k,itra) =dtime*d_tra(i,k,itra)
	717	d_tra(i, k, itra) = 0.
	718	END DO
	719	END DO
	720	END DO
	721	END IF
	722	!!AC!
	723
	724	DO k = 1, klev
	725	DO i = 1, klon
	726	t1(i, k) = t(i, k) + d_t(i, k)
	727	q1(i, k) = q(i, k) + d_q(i, k)
	728	! juste diag: pas besoin d'isos ici
	729	END DO
	730	END DO
	731
	732	! !jyg
	733	IF (iflag_con == 30 .OR. iflag_ice_thermo ==0) THEN
	734	! --Separation neige/pluie (pour diagnostics) !jyg
	735	DO k = 1, klev !jyg
	736	DO i = 1, klon !jyg
	737	IF (t1(i,k)<rtt) THEN !jyg
	738	pmflxs(i, k) = Vprecip(i, k) !jyg
	739	ELSE !jyg
	740	pmflxr(i, k) = Vprecip(i, k) !jyg
	741	END IF !jyg
	742	END DO !jyg
	743	END DO !jyg
	744	ELSE
	745	DO k = 1, klev !jyg
	746	DO i = 1, klon !jyg
	747	pmflxs(i, k) = Vprecipi(i, k) !jyg
	748	pmflxr(i, k) = Vprecip(i, k)-Vprecipi(i, k) !jyg
	749	END DO !jyg
	750	END DO !jyg
	751	ENDIF
	752
	753	! c IF (if_ebil.ge.2) THEN
	754	! c ztit='after convect'
	755	! c CALL diagetpq(paire,ztit,ip_ebil,2,2,dtime
	756	! c e , t1,q1,ql,qs,u,v,paprs,pplay
	757	! c s , d_h_vcol, d_qt, d_qw, d_ql, d_qs, d_ec)
	758	! c call diagphy(paire,ztit,ip_ebil
	759	! c e , zero_v, zero_v, zero_v, zero_v, zero_v
	760	! c e , zero_v, rain, zero_v, ztsol
	761	! c e , d_h_vcol, d_qt, d_ec
	762	! c s , fs_bound, fq_bound )
	763	! c END IF
	764
	765
	766	! les traceurs ne sont pas mis dans cette version de convect4:
	767	IF (iflag_con==4) THEN
	768	DO itra = 1, ntra
	769	DO k = 1, klev
	770	DO i = 1, klon
	771	d_tra(i, k, itra) = 0.
	772	END DO
	773	END DO
	774	END DO
	775	END IF
	776	! print*, 'concvl->: dd_t,dd_q ',dd_t(1,1),dd_q(1,1)
	777
	778	DO k = 1, klev
	779	DO i = 1, klon
	780	dtvpdt1(i, k) = 0.
	781	dtvpdq1(i, k) = 0.
	782	END DO
	783	END DO
	784	DO i = 1, klon
	785	dplcldt(i) = 0.
	786	dplcldr(i) = 0.
	787	END DO
	788
	789	IF (prt_level>=20) THEN
	790	DO k = 1, klev
	791	! print*,'physiq apres_add_con i k it d_u d_v d_t d_q qdl0',igout, &
	792	! k,itap,d_u_con(igout,k) ,d_v_con(igout,k), d_t_con(igout,k), &
	793	! d_q_con(igout,k),dql0(igout,k)
	794	! print*,'phys apres_add_con itap Ma cin ALE ALP wak t q undi t q', &
	795	! itap,Ma(igout,k),cin(igout),ALE(igout), ALP(igout), &
	796	! t_wake(igout,k),q_wake(igout,k),t_undi(igout,k),q_undi(igout,k)
	797	! print*,'phy apres_add_con itap CON rain snow EMA wk1 wk2 Vpp mip', &
	798	! itap,rain_con(igout),snow_con(igout),ema_work1(igout,k), &
	799	! ema_work2(igout,k),Vprecip(igout,k), mip(igout,k)
	800	! print*,'phy apres_add_con itap upwd dnwd dnwd0 cape tvp Tconv ', &
	801	! itap,upwd(igout,k),dnwd(igout,k),dnwd0(igout,k),cape(igout), &
	802	! tvp(igout,k),Tconv(igout,k)
	803	! print*,'phy apres_add_con itap dtvpdt dtvdq dplcl dplcldr qcondc', &
	804	! itap,dtvpdt1(igout,k),dtvpdq1(igout,k),dplcldt(igout), &
	805	! dplcldr(igout),qcondc(igout,k)
	806	! print*,'phy apres_add_con itap wd pmflxr Kpmflxr Kp1 Kpmflxs Kp1', &
	807	! itap,wd(igout),pmflxr(igout,k),pmflxr(igout,k+1),pmflxs(igout,k), &
	808	! pmflxs(igout,k+1)
	809	! print*,'phy apres_add_con itap da phi mp ftd fqd lalim wgth', &
	810	! itap,da(igout,k),phi(igout,k,k),mp(igout,k),ftd(igout,k), &
	811	! fqd(igout,k),lalim_conv(igout),wght_th(igout,k)
	812	END DO
	813	END IF !(prt_level.EQ.20) THEN
	814
	815	RETURN
	816	END SUBROUTINE concvl
	817

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format