Context Navigation

add_phys_tend_mod.F90 @ 4359

Last change on this file since 4359 was 4143, checked in by dcugnet, 3 years ago
Some variables are renamed or replaced by direct equivalents: iso_indnum -> tracers(:)%iso_iName niso_possibles -> niso iqiso -> iqIsoPha ; index_trac -> itZonIso ok_iso_verif -> isoCheck ntraceurs_zone -> nzone ; ntraciso -> ntiso qperemin -> min_qparent ; masseqmin -> min_qmass ; ratiomin -> min_ratio Some renamed variables are only aliased with the older name (using USE <module>, ONLY: <oldName> => <newName>) in routines where they are repeated many times. Few hard-coded indexes are now computed (examples: ilic, iso, ivap, irneb, iq_vap, iq_liq, iso_H2O, iso_HDO, iso_HTO, iso_O17, iso_O18). The IF(isoCheck) test is now embedded in the check_isotopes_seq and check_isotopes_loc routines (lighter calling).
Property svn:keywords set to `Id`
File size: 33.6 KB

Line
1	!
2	! $Id: add_phys_tend_mod.F90 4143 2022-05-09 10:35:40Z dcugnet $
3	!
4	!
5	MODULE add_phys_tend_mod
6
7	IMPLICIT NONE
8	! flag to compute diagnostics to check energy conservation. If fl_ebil==0, no check
9	INTEGER, SAVE :: fl_ebil
10	!$OMP THREADPRIVATE(fl_ebil)
11	! flag to include modifcations to ensure energy conservation. If fl_cor_ebil==0, no corrections
12	! Note that with time, all these modifications should be included by default
13	INTEGER, SAVE :: fl_cor_ebil
14	!$OMP THREADPRIVATE(fl_cor_ebil)
15
16	CONTAINS
17
18	SUBROUTINE add_pbl_tend(zdu, zdv, zdt, zdq, zdql, zdqi, paprs, text,abortphy,flag_inhib_tend, itap &
19	#ifdef ISO
20	,zdxt,zdxtl,zdxti &
21	#endif
22	)
23	! ======================================================================
24	! Ajoute les tendances de couche limite, soit determinees par la
25	! parametrisation
26	! physique, soit forcees, aux variables d etat de la dynamique t_seri,
27	! q_seri ...
28	! ======================================================================
29
30
31	! ======================================================================
32	! Declarations
33	! ======================================================================
34
35	USE dimphy, ONLY: klon, klev
36	! USE dimphy
37	USE phys_local_var_mod
38	USE phys_state_var_mod
39	USE mod_grid_phy_lmdz, ONLY: nbp_lev
40	#ifdef ISO
41	USE infotrac_phy, ONLY: ntraciso=>ntiso
42	USE isotopes_mod, ONLY: iso_eau
43	#endif
44	IMPLICIT NONE
45	REAL,SAVE,ALLOCATABLE :: hthturb_gcssold(:)
46	REAL,SAVE,ALLOCATABLE :: hqturb_gcssold(:)
47	!$OMP THREADPRIVATE(hthturb_gcssold,hqturb_gcssold)
48	REAL,SAVE :: dtime_frcg
49	LOGICAL,SAVE :: turb_fcg_gcssold
50	LOGICAL,SAVE :: firstcall=.true.
51	!$OMP THREADPRIVATE(firstcall,turb_fcg_gcssold,dtime_frcg)
52	INTEGER abortphy
53	! COMMON /turb_forcing/dtime_frcg, hthturb_gcssold, hqturb_gcssold, &
54	! turb_fcg_gcssold
55	#ifdef ISO
56	REAL,SAVE,ALLOCATABLE :: hxtturb_gcssold(:,:)
57	!$OMP THREADPRIVATE(hxtturb_gcssold)
58	! variable à définir dans le 1D
59	#endif
60
61	! Arguments :
62	! ------------
63	REAL zdu(klon, klev), zdv(klon, klev)
64	REAL zdt(klon, klev), zdq(klon, klev), zdql(klon, klev), zdqi(klon, klev)
65	CHARACTER () text
66	REAL paprs(klon,klev+1)
67	INTEGER flag_inhib_tend ! if flag_inhib_tend != 0, tendencies are not added
68	INTEGER itap ! time step number
69	#ifdef ISO
70	REAL zdxt(ntraciso,klon, klev), zdxtl(ntraciso,klon, klev), zdxti(ntraciso,klon, klev)
71	#endif
72
73	! Local :
74	! --------
75	REAL zzdt(klon, klev), zzdq(klon, klev)
76	INTEGER i, k
77	#ifdef ISO
78	REAL zzdxt(ntraciso,klon, klev)
79	INTEGER ixt
80	#endif
81
82	IF (firstcall) THEN
83	ALLOCATE(hthturb_gcssold(nbp_lev))
84	ALLOCATE(hqturb_gcssold(nbp_lev))
85	#ifdef ISO
86	ALLOCATE(hxtturb_gcssold(ntraciso,nbp_lev))
87	#endif
88	firstcall=.false.
89	ENDIF
90
91	IF (turb_fcg_gcssold) THEN
92	DO k = 1, klev
93	DO i = 1, klon
94	zzdt(i, k) = hthturb_gcssold(k)*dtime_frcg
95	zzdq(i, k) = hqturb_gcssold(k)*dtime_frcg
96	#ifdef ISO
97	do ixt=1,ntraciso
98	zzdxt(ixt,i, k) = hxtturb_gcssold(ixt,k)*dtime_frcg
99	enddo
100	#endif
101	END DO
102	END DO
103	PRINT *, ' add_pbl_tend, dtime_frcg ', dtime_frcg
104	PRINT *, ' add_pbl_tend, zzdt ', zzdt
105	PRINT *, ' add_pbl_tend, zzdq ', zzdq
106	CALL add_phys_tend(zdu, zdv, zzdt, zzdq, zdql, zdqi, paprs, text,abortphy,flag_inhib_tend, itap, 0 &
107	#ifdef ISO
108	,zzdxt,zdxtl,zdxti &
109	#endif
110	)
111	ELSE
112	CALL add_phys_tend(zdu, zdv, zdt, zdq, zdql, zdqi, paprs, text,abortphy,flag_inhib_tend, itap, 0 &
113	#ifdef ISO
114	,zdxt,zdxtl,zdxti &
115	#endif
116	)
117	END IF
118
119
120	RETURN
121	END SUBROUTINE add_pbl_tend
122	!
123	! $Id: add_phys_tend_mod.F90 4143 2022-05-09 10:35:40Z dcugnet $
124	!
125	SUBROUTINE add_phys_tend (zdu,zdv,zdt,zdq,zdql,zdqi,paprs,text, &
126	abortphy,flag_inhib_tend, itap, diag_mode &
127	#ifdef ISO
128	,zdxt,zdxtl,zdxti &
129	#endif
130	)
131	!======================================================================
132	! Ajoute les tendances des variables physiques aux variables
133	! d'etat de la dynamique t_seri, q_seri ...
134	! On en profite pour faire des tests sur les tendances en question.
135	!======================================================================
136
137
138	!======================================================================
139	! Declarations
140	!======================================================================
141
142	USE dimphy, ONLY: klon, klev
143	USE phys_state_var_mod, ONLY : phys_tstep
144	USE phys_local_var_mod, ONLY: u_seri, v_seri, ql_seri, qs_seri, q_seri, t_seri
145	#ifdef ISO
146	USE phys_local_var_mod, ONLY: xtl_seri, xts_seri, xt_seri
147	#endif
148	USE phys_state_var_mod, ONLY: ftsol
149	USE geometry_mod, ONLY: longitude_deg, latitude_deg
150	USE print_control_mod, ONLY: prt_level
151	USE cmp_seri_mod
152	USE phys_output_var_mod, ONLY : d_qw_col, d_ql_col, d_qs_col, d_qt_col, d_ek_col, d_h_dair_col &
153	& , d_h_qw_col, d_h_ql_col, d_h_qs_col, d_h_col
154
155	#ifdef ISO
156	USE infotrac_phy, ONLY: ntraciso=>ntiso
157	#ifdef ISOVERIF
158	USE isotopes_mod, ONLY: iso_eau
159	USE isotopes_verif_mod
160	#endif
161	#endif
162	IMPLICIT none
163	include "YOMCST.h"
164	include "clesphys.h"
165
166	! Arguments :
167	!------------
168	REAL, DIMENSION(klon,klev), INTENT(IN) :: zdu, zdv
169	REAL, DIMENSION(klon,klev), INTENT(IN) :: zdt, zdql, zdqi
170	REAL, DIMENSION(klon,klev+1), INTENT(IN) :: paprs
171	CHARACTER(), INTENT(IN) :: text
172	INTEGER, INTENT(IN) :: abortphy
173	INTEGER, INTENT(IN) :: flag_inhib_tend ! if not 0, tendencies are not added
174	INTEGER, INTENT(IN) :: itap ! time step number
175	INTEGER, INTENT(IN) :: diag_mode ! 0 -> normal effective mode
176	! 1 -> only conservation stats are computed
177	!
178	REAL, DIMENSION(klon,klev), INTENT(INOUT) :: zdq
179	#ifdef ISO
180	REAL zdxt(ntraciso,klon,klev),zdxtl(ntraciso,klon,klev) &
181	,zdxti(ntraciso,klon,klev)
182	integer ixt
183	#endif
184
185	! Local :
186	!--------
187	REAL zt,zq
188	#ifdef ISO
189	REAL zxt(ntraciso)
190	real qprec(klon,klev)
191	REAL zxt_int(ntraciso), zxtp_int(ntraciso), zxtp(ntraciso,klev),zxt_new
192	#endif
193	REAL zq_int, zqp_int, zq_new
194
195	REAL zqp(klev)
196
197	! Save variables, used in diagnostic mode (diag_mode=1).
198	REAL, DIMENSION(klon,klev) :: sav_u_seri, sav_v_seri
199	REAL, DIMENSION(klon,klev) :: sav_ql_seri, sav_qs_seri, sav_q_seri
200	REAL, DIMENSION(klon,klev) :: sav_t_seri
201	REAL, DIMENSION(klon,klev) :: sav_zdq
202	#ifdef ISO
203	REAL, DIMENSION(ntraciso,klon,klev) :: sav_zdxt
204	REAL, DIMENSION(ntraciso,klon,klev) :: sav_xtl_seri, sav_xts_seri, sav_xt_seri
205	#endif
206	!
207	INTEGER i, k,j, n
208	INTEGER jadrs(klon*klev), jbad
209	INTEGER jqadrs(klon*klev), jqbad
210	INTEGER kadrs(klon*klev)
211	INTEGER kqadrs(klon*klev)
212
213	LOGICAL done(klon)
214
215	integer debug_level
216	logical, save :: first=.true.
217	!$OMP THREADPRIVATE(first)
218	!
219	!======================================================================
220	! Variables for energy conservation tests
221	!======================================================================
222	!
223
224	! zh_col------- total enthalpy of vertical air column
225	! (air with watter vapour, liquid and solid) (J/m2)
226	! zh_dair_col--- total enthalpy of dry air (J/m2)
227	! zh_qw_col---- total enthalpy of watter vapour (J/m2)
228	! zh_ql_col---- total enthalpy of liquid watter (J/m2)
229	! zh_qs_col---- total enthalpy of solid watter (J/m2)
230	! zqw_col------ total mass of watter vapour (kg/m2)
231	! zql_col------ total mass of liquid watter (kg/m2)
232	! zqs_col------ total mass of solid watter (kg/m2)
233	! zek_col------ total kinetic energy (kg/m2)
234	!
235	REAL zairm(klon, klev) ! layer air mass (kg/m2)
236	REAL zqw_col(klon,2)
237	REAL zql_col(klon,2)
238	REAL zqs_col(klon,2)
239	REAL zek_col(klon,2)
240	REAL zh_dair_col(klon,2)
241	REAL zh_qw_col(klon,2), zh_ql_col(klon,2), zh_qs_col(klon,2)
242	REAL zh_col(klon,2)
243
244	REAL zcpvap, zcwat, zcice
245
246	!======================================================================
247	! Initialisations
248
249	IF (prt_level >= 5) then
250	write (,) "In add_phys_tend, after ",text
251	call flush
252	end if
253
254	! if flag_inhib_tend != 0, tendencies are not added
255	IF (flag_inhib_tend /= 0) then
256	! If requiered, diagnostics are shown
257	IF (flag_inhib_tend > 0) then
258	! print some diagnostics if xxx_seri have changed
259	call cmp_seri(flag_inhib_tend,text)
260	END IF
261	RETURN ! on n ajoute pas les tendance
262	END IF
263
264	IF (abortphy==1) RETURN ! on n ajoute pas les tendance si le modele
265	! a deja plante.
266
267	debug_level=10
268	if (first) then
269	print *,"TestJLD rcpv, rcw, rcs",rcpv, rcw, rcs
270	first=.false.
271	endif
272	!
273	! print *,'add_phys_tend: paprs ',paprs
274	! When in diagnostic mode, save initial values of out variables
275	IF (diag_mode == 1) THEN
276	sav_u_seri(:,:) = u_seri(:,:)
277	sav_v_seri(:,:) = v_seri(:,:)
278	sav_ql_seri(:,:) = ql_seri(:,:)
279	sav_qs_seri(:,:) = qs_seri(:,:)
280	sav_q_seri(:,:) = q_seri(:,:)
281	sav_t_seri(:,:) = t_seri(:,:)
282	sav_zdq(:,:) = zdq(:,:)
283	#ifdef ISO
284	sav_zdxt(:,:,:) = zdxt(:,:,:)
285	#endif
286	ENDIF ! (diag_mode == 1)
287	!======================================================================
288	! Diagnostics for energy conservation tests
289	!======================================================================
290	DO k = 1, klev
291	! layer air mass
292	zairm(:, k) = (paprs(:,k)-paprs(:,k+1))/rg
293	END DO
294
295	if (fl_ebil .GT. 0) then
296	! ------------------------------------------------
297	! Compute vertical sum for each atmospheric column
298	! ------------------------------------------------
299	n=1 ! begining of time step
300
301	zcpvap = rcpv
302	zcwat = rcw
303	zcice = rcs
304
305	CALL integr_v(klon, klev, zcpvap, &
306	t_seri, q_seri, ql_seri, qs_seri, u_seri, v_seri, zairm, &
307	zqw_col(:,n), zql_col(:,n), zqs_col(:,n), zek_col(:,n), zh_dair_col(:,n), &
308	zh_qw_col(:,n), zh_ql_col(:,n), zh_qs_col(:,n), zh_col(:,n))
309
310	end if ! end if (fl_ebil .GT. 0)
311
312	!======================================================================
313	! Ajout des tendances sur le vent et l'eau liquide
314	!======================================================================
315
316	u_seri(:,:)=u_seri(:,:)+zdu(:,:)
317	v_seri(:,:)=v_seri(:,:)+zdv(:,:)
318	ql_seri(:,:)=ql_seri(:,:)+zdql(:,:)
319	qs_seri(:,:)=qs_seri(:,:)+zdqi(:,:)
320	#ifdef ISO
321	xtl_seri(:,:,:)=xtl_seri(:,:,:)+zdxtl(:,:,:)
322	xts_seri(:,:,:)=xts_seri(:,:,:)+zdxti(:,:,:)
323	#endif
324
325	!======================================================================
326	! On ajoute les tendances de la temperature et de la vapeur d'eau
327	! en verifiant que ca ne part pas dans les choux
328	!======================================================================
329
330	jbad=0
331	jqbad=0
332	DO k = 1, klev
333	DO i = 1, klon
334	zt=t_seri(i,k)+zdt(i,k)
335	zq=q_seri(i,k)+zdq(i,k)
336	#ifdef ISO
337	do ixt=1,ntraciso
338	zxt(ixt)=xt_seri(ixt,i,k)+zdxt(ixt,i,k)
339	enddo !do ixt=1,ntraciso
340	qprec(i,k)=q_seri(i,k)
341	#endif
342	IF ( zt>370. .or. zt<130. .or. abs(zdt(i,k))>50. ) then
343	jbad = jbad + 1
344	jadrs(jbad) = i
345	kadrs(jbad) = k
346	ENDIF
347	IF ( zq<0. .or. zq>0.1 .or. abs(zdq(i,k))>1.e-2 ) then
348	jqbad = jqbad + 1
349	jqadrs(jqbad) = i
350	kqadrs(jqbad) = k
351	ENDIF
352	t_seri(i,k)=zt
353	q_seri(i,k)=zq
354	#ifdef ISO
355	do ixt=1,ntraciso
356	xt_seri(ixt,i,k)=zxt(ixt)
357	enddo !do ixt=1,ntraciso
358	#endif
359	ENDDO
360	ENDDO
361
362	#ifdef ISO
363	#ifdef ISOVERIF
364	if (iso_eau.gt.0) then
365	call iso_verif_egalite_vect2D( &
366	xt_seri,q_seri, &
367	'add_phys_tend 122: '//text,ntraciso,klon,klev)
368	call iso_verif_egalite_vect2D( &
369	xtl_seri,ql_seri, &
370	'add_phys_tend 138: '//text,ntraciso,klon,klev)
371	endif !if (iso_eau.gt.0) then
372	#endif
373	#endif
374
375
376	!=====================================================================================
377	! Impression et stop en cas de probleme important
378	!=====================================================================================
379
380	IF (jbad .GT. 0) THEN
381	DO j = 1, jbad
382	i=jadrs(j)
383	if(prt_level.ge.debug_level) THEN
384	print*,'PLANTAGE POUR LE POINT i lon lat =',&
385	i,longitude_deg(i),latitude_deg(i),text
386	print*,'l T dT Q dQ '
387	DO k = 1, klev
388	write(*,'(i3,2f14.4,2e14.2)') k,t_seri(i,k),zdt(i,k),q_seri(i,k),zdq(i,k)
389	ENDDO
390	call print_debug_phys(i,debug_level,text)
391	endif
392	ENDDO
393	ENDIF
394	!
395	!=====================================================================================
396	! Impression, warning et correction en cas de probleme moins important
397	!=====================================================================================
398	IF (jqbad .GT. 0) THEN
399	done(:) = .false. !jyg
400	DO j = 1, jqbad
401	i=jqadrs(j)
402	if(prt_level.ge.debug_level) THEN
403	print*,'WARNING : EAU POUR LE POINT i lon lat =',&
404	i,longitude_deg(i),latitude_deg(i),text
405	print*,'l T dT Q dQ '
406	DO k = 1, klev
407	write(*,'(i3,2f14.4,2e14.2)') k,t_seri(i,k),zdt(i,k),q_seri(i,k),zdq(i,k)
408	ENDDO
409	endif
410	IF (ok_conserv_q) THEN
411	!jyg<20140228 Corrections pour conservation de l'eau
412	IF (.NOT.done(i)) THEN !jyg
413	DO k = 1, klev
414	zqp(k) = max(q_seri(i,k),1.e-15)
415	#ifdef ISO
416	do ixt=1,ntraciso
417	zxtp(ixt,k)=xt_seri(ixt,i,k)*max(1.0,1.e-15/qprec(i,k))
418	enddo
419	#endif
420	ENDDO
421	zq_int = 0.
422	zqp_int = 0.
423	DO k = 1, klev
424	zq_int = zq_int + q_seri(i,k)*(paprs(i,k)-paprs(i,k+1))/Rg
425	zqp_int = zqp_int + zqp(k) *(paprs(i,k)-paprs(i,k+1))/Rg
426	ENDDO
427	#ifdef ISO
428	do ixt=1,ntraciso
429	zxt_int(ixt) = 0.
430	zxtp_int(ixt) = 0.
431	DO k = 1, klev
432	zxt_int(ixt) = zxt_int(ixt) + xt_seri(ixt,i,k)*(paprs(i,k)-paprs(i,k+1))/Rg
433	zxtp_int(ixt) = zxtp_int(ixt) + zxtp(ixt,k) *(paprs(i,k)-paprs(i,k+1))/Rg
434	ENDDO
435	enddo
436	#endif
437	if(prt_level.ge.debug_level) THEN
438	print*,' cas q_seri<1.e-15 i k zq_int zqp_int zq_int/zqp_int :', &
439	i, kqadrs(j), zq_int, zqp_int, zq_int/zqp_int
440	endif
441	DO k = 1, klev
442	zq_new = zqp(k)*zq_int/zqp_int
443	zdq(i,k) = zdq(i,k) + zq_new - q_seri(i,k)
444	q_seri(i,k) = zq_new
445	#ifdef ISO
446	do ixt=1,ntraciso
447	zxt_new = zxtp(ixt,k)*zxt_int(ixt)/zxtp_int(ixt)
448	zdxt(ixt,i,k) = zdxt(ixt,i,k) + zxt_new - xt_seri(ixt,i,k)
449	xt_seri(ixt,i,k) = zxt_new
450	enddo !ixt=1,ntraciso
451	#endif
452	ENDDO
453	done(i) = .true.
454	ENDIF !(.NOT.done(i))
455	ELSE
456	!jyg>
457	DO k = 1, klev
458	zq=q_seri(i,k)+zdq(i,k)
459	if (zq.lt.1.e-15) then
460	if (q_seri(i,k).lt.1.e-15) then
461	if(prt_level.ge.debug_level) THEN
462	print*,' cas q_seri<1.e-15 i k q_seri zq zdq :',i,k,q_seri(i,k),zq,zdq(i,k)
463	endif
464	q_seri(i,k)=1.e-15
465	zdq(i,k)=(1.e-15-q_seri(i,k))
466	#ifdef ISO
467	do ixt=1,ntraciso
468	xt_seri(ixt,i,k)=1.e-15*(xt_seri(ixt,i,k)/qprec(i,k))
469	! xt_seri(ixt,i,k)=1.e-15*(Rdefault(index_iso(ixt)))
470	! zdxt(ixt,i,k)=0.0
471	zdxt(ixt,i,k)=xt_seri(ixt,i,k)*(1.e-15/qprec(i,k)-1)
472	enddo !do ixt=1,ntraciso
473	#endif
474	endif
475	endif
476	! zq=q_seri(i,k)+zdq(i,k)
477	! if (zq.lt.1.e-15) then
478	! zdq(i,k)=(1.e-15-q_seri(i,k))
479	! endif
480	ENDDO
481	!jyg<20140228
482	ENDIF ! (ok_conserv_q)
483	!jyg>
484	ENDDO ! j = 1, jqbad
485	ENDIF
486
487	#ifdef ISO
488	#ifdef ISOVERIF
489	if (iso_eau.gt.0) then
490	call iso_verif_egalite_vect2D( &
491	xt_seri,q_seri, &
492	'add_phys_tend 173'//text,ntraciso,klon,klev)
493	call iso_verif_egalite_vect2D( &
494	zdxt,zdq, &
495	'add_phys_tend 175'//text,ntraciso,klon,klev)
496	endif !if (iso_eau.gt.0) then
497	#endif
498	#endif
499	!
500
501	!IM ajout memes tests pour reverifier les jbad, jqbad beg
502	jbad=0
503	jqbad=0
504	DO k = 1, klev
505	DO i = 1, klon
506	IF ( t_seri(i,k)>370. .or. t_seri(i,k)<130. .or. abs(zdt(i,k))>50. ) then
507	jbad = jbad + 1
508	jadrs(jbad) = i
509	! if(prt_level.ge.debug_level) THEN
510	! print*,'cas2 i k t_seri zdt',i,k,t_seri(i,k),zdt(i,k)
511	! endif
512	ENDIF
513	IF ( q_seri(i,k)<0. .or. q_seri(i,k)>0.1 .or. abs(zdq(i,k))>1.e-2 ) then
514	jqbad = jqbad + 1
515	jqadrs(jqbad) = i
516	kqadrs(jqbad) = k
517	! if(prt_level.ge.debug_level) THEN
518	! print*,'cas2 i k q_seri zdq',i,k,q_seri(i,k),zdq(i,k)
519	! endif
520	ENDIF
521	ENDDO
522	ENDDO
523	IF (jbad .GT. 0) THEN
524	DO j = 1, jbad
525	i=jadrs(j)
526	k=kadrs(j)
527	if(prt_level.ge.debug_level) THEN
528	print*,'PLANTAGE2 POUR LE POINT i itap lon lat txt jbad zdt t',&
529	i,itap,longitude_deg(i),latitude_deg(i),text,jbad, &
530	& zdt(i,k),t_seri(i,k)-zdt(i,k)
531	!!! if(prt_level.ge.10.and.itap.GE.229.and.i.EQ.3027) THEN
532	print*,'l T dT Q dQ '
533	DO k = 1, klev
534	write(*,'(i3,2f14.4,2e14.2)') k,t_seri(i,k),zdt(i,k),q_seri(i,k),zdq(i,k)
535	ENDDO
536	call print_debug_phys(i,debug_level,text)
537	endif
538	ENDDO
539	ENDIF
540	!
541	IF (jqbad .GT. 0) THEN
542	DO j = 1, jqbad
543	i=jqadrs(j)
544	k=kqadrs(j)
545	if(prt_level.ge.debug_level) THEN
546	print*,'WARNING : EAU2 POUR LE POINT i itap lon lat txt jqbad zdq q zdql ql',&
547	i,itap,longitude_deg(i),latitude_deg(i),text,jqbad,&
548	& zdq(i,k), q_seri(i,k)-zdq(i,k), zdql(i,k), ql_seri(i,k)-zdql(i,k)
549	!!! if(prt_level.ge.10.and.itap.GE.229.and.i.EQ.3027) THEN
550	print*,'l T dT Q dQ '
551	DO k = 1, klev
552	write(*,'(i3,2f14.4,2e14.2)') k,t_seri(i,k),zdt(i,k),q_seri(i,k),zdq(i,k)
553	ENDDO
554	call print_debug_phys(i,debug_level,text)
555	endif
556	ENDDO
557	ENDIF
558
559	!======================================================================
560	! Contrôle des min/max pour arrêt du modèle
561	! Si le modele est en mode abortphy, on retire les tendances qu'on
562	! vient d'ajouter. Pas exactement parce qu'on ne tient pas compte des
563	! seuils.
564	!======================================================================
565
566	CALL hgardfou(t_seri,ftsol,text,abortphy)
567	IF (abortphy==1) THEN
568	Print*,'ERROR ABORT hgardfou dans ',text
569	! JLD pourquoi on ne modifie pas de meme t_seri et q_seri ?
570	u_seri(:,:)=u_seri(:,:)-zdu(:,:)
571	v_seri(:,:)=v_seri(:,:)-zdv(:,:)
572	ql_seri(:,:)=ql_seri(:,:)-zdql(:,:)
573	qs_seri(:,:)=qs_seri(:,:)-zdqi(:,:)
574	ENDIF
575
576	!======================================================================
577	! Diagnostics for energy conservation tests
578	!======================================================================
579
580	if (fl_ebil .GT. 0) then
581
582	! ------------------------------------------------
583	! Compute vertical sum for each atmospheric column
584	! ------------------------------------------------
585	n=2 ! end of time step
586
587	CALL integr_v(klon, klev, zcpvap, &
588	t_seri, q_seri, ql_seri, qs_seri, u_seri, v_seri, zairm, &
589	zqw_col(:,n), zql_col(:,n), zqs_col(:,n), zek_col(:,n), zh_dair_col(:,n), &
590	zh_qw_col(:,n), zh_ql_col(:,n), zh_qs_col(:,n), zh_col(:,n))
591
592	! ------------------------------------------------
593	! Compute the changes by unit of time
594	! ------------------------------------------------
595
596	d_qw_col(:) = (zqw_col(:,2)-zqw_col(:,1))/phys_tstep
597	d_ql_col(:) = (zql_col(:,2)-zql_col(:,1))/phys_tstep
598	d_qs_col(:) = (zqs_col(:,2)-zqs_col(:,1))/phys_tstep
599	d_qt_col(:) = d_qw_col(:) + d_ql_col(:) + d_qs_col(:)
600
601	d_ek_col(:) = (zek_col(:,2)-zek_col(:,1))/phys_tstep
602
603	d_h_dair_col(:) = (zh_dair_col(:,2)-zh_dair_col(:,1))/phys_tstep
604	d_h_qw_col(:) = (zh_qw_col(:,2)-zh_qw_col(:,1))/phys_tstep
605	d_h_ql_col(:) = (zh_ql_col(:,2)-zh_ql_col(:,1))/phys_tstep
606	d_h_qs_col(:) = (zh_qs_col(:,2)-zh_qs_col(:,1))/phys_tstep
607
608	d_h_col = (zh_col(:,2)-zh_col(:,1))/phys_tstep
609
610	end if ! end if (fl_ebil .GT. 0)
611	!
612	! When in diagnostic mode, restore "out" variables to initial values.
613	IF (diag_mode == 1) THEN
614	u_seri(:,:) = sav_u_seri(:,:)
615	v_seri(:,:) = sav_v_seri(:,:)
616	ql_seri(:,:) = sav_ql_seri(:,:)
617	qs_seri(:,:) = sav_qs_seri(:,:)
618	q_seri(:,:) = sav_q_seri(:,:)
619	t_seri(:,:) = sav_t_seri(:,:)
620	zdq(:,:) = sav_zdq(:,:)
621	#ifdef ISO
622	xtl_seri(:,:,:) = sav_xtl_seri(:,:,:)
623	xts_seri(:,:,:) = sav_xts_seri(:,:,:)
624	xt_seri(:,:,:) = sav_xt_seri(:,:,:)
625	zdxt(:,:,:) = sav_zdxt(:,:,:)
626	#endif
627	ENDIF ! (mode == 1)
628
629	RETURN
630	END SUBROUTINE add_phys_tend
631
632	SUBROUTINE diag_phys_tend (nlon, nlev, uu, vv, temp, qv, ql, qs, &
633	zdu,zdv,zdt,zdq,zdql,zdqs,paprs,text)
634	!======================================================================
635	! Ajoute les tendances des variables physiques aux variables
636	! d'etat de la dynamique t_seri, q_seri ...
637	! On en profite pour faire des tests sur les tendances en question.
638	!======================================================================
639	! C Risi: on ne met pas les isos dedans car elle n'est jamais apelée.
640
641	!======================================================================
642	! Declarations
643	!======================================================================
644
645	USE phys_state_var_mod, ONLY : phys_tstep, ftsol
646	USE geometry_mod, ONLY: longitude_deg, latitude_deg
647	USE print_control_mod, ONLY: prt_level
648	USE cmp_seri_mod
649	USE phys_output_var_mod, ONLY : d_qw_col, d_ql_col, d_qs_col, d_qt_col, d_ek_col, d_h_dair_col &
650	& , d_h_qw_col, d_h_ql_col, d_h_qs_col, d_h_col
651	IMPLICIT none
652	include "YOMCST.h"
653	include "clesphys.h"
654
655	! Arguments :
656	!------------
657	INTEGER, INTENT(IN) :: nlon, nlev
658	REAL, DIMENSION(nlon,nlev), INTENT(IN) :: uu, vv
659	REAL, DIMENSION(nlon,nlev), INTENT(IN) :: temp, qv, ql, qs
660	REAL, DIMENSION(nlon,nlev), INTENT(IN) :: zdu, zdv
661	REAL, DIMENSION(nlon,nlev), INTENT(IN) :: zdt, zdq, zdql, zdqs
662	REAL, DIMENSION(nlon,nlev+1), INTENT(IN) :: paprs
663	CHARACTER(), INTENT(IN) :: text
664
665	! Local :
666	!--------
667	REAL, DIMENSION(nlon,nlev) :: uu_n, vv_n
668	REAL, DIMENSION(nlon,nlev) :: temp_n, qv_n, ql_n, qs_n
669
670
671	!
672	INTEGER k, n
673
674	integer debug_level
675	logical, save :: first=.true.
676	!$OMP THREADPRIVATE(first)
677	!
678	!======================================================================
679	! Variables for energy conservation tests
680	!======================================================================
681	!
682
683	! zh_col------- total enthalpy of vertical air column
684	! (air with watter vapour, liquid and solid) (J/m2)
685	! zh_dair_col--- total enthalpy of dry air (J/m2)
686	! zh_qw_col---- total enthalpy of watter vapour (J/m2)
687	! zh_ql_col---- total enthalpy of liquid watter (J/m2)
688	! zh_qs_col---- total enthalpy of solid watter (J/m2)
689	! zqw_col------ total mass of watter vapour (kg/m2)
690	! zql_col------ total mass of liquid watter (kg/m2)
691	! zqs_col------ total mass of solid watter (kg/m2)
692	! zek_col------ total kinetic energy (kg/m2)
693	!
694	REAL zairm(nlon, nlev) ! layer air mass (kg/m2)
695	REAL zqw_col(nlon,2)
696	REAL zql_col(nlon,2)
697	REAL zqs_col(nlon,2)
698	REAL zek_col(nlon,2)
699	REAL zh_dair_col(nlon,2)
700	REAL zh_qw_col(nlon,2), zh_ql_col(nlon,2), zh_qs_col(nlon,2)
701	REAL zh_col(nlon,2)
702
703	!======================================================================
704	! Initialisations
705
706	IF (prt_level >= 5) then
707	write (,) "In diag_phys_tend, after ",text
708	call flush
709	end if
710
711	debug_level=10
712	if (first) then
713	print *,"TestJLD rcpv, rcw, rcs",rcpv, rcw, rcs
714	first=.false.
715	endif
716	!
717	! print *,'add_phys_tend: paprs ',paprs
718	!======================================================================
719	! Diagnostics for energy conservation tests
720	!======================================================================
721	DO k = 1, nlev
722	! layer air mass
723	zairm(:, k) = (paprs(:,k)-paprs(:,k+1))/rg
724	END DO
725
726	if (fl_ebil .GT. 0) then
727	! ------------------------------------------------
728	! Compute vertical sum for each atmospheric column
729	! ------------------------------------------------
730	n=1 ! begining of time step
731
732	CALL integr_v(nlon, nlev, rcpv, &
733	temp, qv, ql, qs, uu, vv, zairm, &
734	zqw_col(:,n), zql_col(:,n), zqs_col(:,n), zek_col(:,n), zh_dair_col(:,n), &
735	zh_qw_col(:,n), zh_ql_col(:,n), zh_qs_col(:,n), zh_col(:,n))
736
737	end if ! end if (fl_ebil .GT. 0)
738
739	!======================================================================
740	! Ajout des tendances sur le vent, la temperature et les diverses phases de l'eau
741	!======================================================================
742
743	uu_n(:,:)=uu(:,:)+zdu(:,:)
744	vv_n(:,:)=vv(:,:)+zdv(:,:)
745	qv_n(:,:)=qv(:,:)+zdq(:,:)
746	ql_n(:,:)=ql(:,:)+zdql(:,:)
747	qs_n(:,:)=qs(:,:)+zdqs(:,:)
748	temp_n(:,:)=temp(:,:)+zdt(:,:)
749
750
751
752	!======================================================================
753	! Diagnostics for energy conservation tests
754	!======================================================================
755
756	if (fl_ebil .GT. 0) then
757
758	! ------------------------------------------------
759	! Compute vertical sum for each atmospheric column
760	! ------------------------------------------------
761	n=2 ! end of time step
762
763	CALL integr_v(nlon, nlev, rcpv, &
764	temp_n, qv_n, ql_n, qs_n, uu_n, vv_n, zairm, &
765	zqw_col(:,n), zql_col(:,n), zqs_col(:,n), zek_col(:,n), zh_dair_col(:,n), &
766	zh_qw_col(:,n), zh_ql_col(:,n), zh_qs_col(:,n), zh_col(:,n))
767
768	! ------------------------------------------------
769	! Compute the changes by unit of time
770	! ------------------------------------------------
771
772	d_qw_col(:) = (zqw_col(:,2)-zqw_col(:,1))/phys_tstep
773	d_ql_col(:) = (zql_col(:,2)-zql_col(:,1))/phys_tstep
774	d_qs_col(:) = (zqs_col(:,2)-zqs_col(:,1))/phys_tstep
775	d_qt_col(:) = d_qw_col(:) + d_ql_col(:) + d_qs_col(:)
776
777	d_ek_col(:) = (zek_col(:,2)-zek_col(:,1))/phys_tstep
778
779	print *,'zdu ', zdu
780	print *,'zdv ', zdv
781	print *,'d_ek_col, zek_col(2), zek_col(1) ',d_ek_col(1), zek_col(1,2), zek_col(1,1)
782
783	d_h_dair_col(:) = (zh_dair_col(:,2)-zh_dair_col(:,1))/phys_tstep
784	d_h_qw_col(:) = (zh_qw_col(:,2)-zh_qw_col(:,1))/phys_tstep
785	d_h_ql_col(:) = (zh_ql_col(:,2)-zh_ql_col(:,1))/phys_tstep
786	d_h_qs_col(:) = (zh_qs_col(:,2)-zh_qs_col(:,1))/phys_tstep
787
788	d_h_col = (zh_col(:,2)-zh_col(:,1))/phys_tstep
789
790	end if ! end if (fl_ebil .GT. 0)
791	!
792
793	RETURN
794	END SUBROUTINE diag_phys_tend
795
796	SUBROUTINE integr_v(nlon, nlev, zcpvap, &
797	temp, qv, ql, qs, uu, vv, zairm, &
798	zqw_col, zql_col, zqs_col, zek_col, zh_dair_col, &
799	zh_qw_col, zh_ql_col, zh_qs_col, zh_col)
800
801	IMPLICIT none
802	include "YOMCST.h"
803
804	INTEGER, INTENT(IN) :: nlon,nlev
805	REAL, INTENT(IN) :: zcpvap
806	REAL, DIMENSION(nlon,nlev), INTENT(IN) :: temp, qv, ql, qs, uu, vv
807	REAL, DIMENSION(nlon,nlev), INTENT(IN) :: zairm
808	REAL, DIMENSION(nlon), INTENT(OUT) :: zqw_col
809	REAL, DIMENSION(nlon), INTENT(OUT) :: zql_col
810	REAL, DIMENSION(nlon), INTENT(OUT) :: zqs_col
811	REAL, DIMENSION(nlon), INTENT(OUT) :: zek_col
812	REAL, DIMENSION(nlon), INTENT(OUT) :: zh_dair_col
813	REAL, DIMENSION(nlon), INTENT(OUT) :: zh_qw_col
814	REAL, DIMENSION(nlon), INTENT(OUT) :: zh_ql_col
815	REAL, DIMENSION(nlon), INTENT(OUT) :: zh_qs_col
816	REAL, DIMENSION(nlon), INTENT(OUT) :: zh_col
817
818	INTEGER :: i, k
819
820
821	! Reset variables
822	zqw_col(:) = 0.
823	zql_col(:) = 0.
824	zqs_col(:) = 0.
825	zek_col(:) = 0.
826	zh_dair_col(:) = 0.
827	zh_qw_col(:) = 0.
828	zh_ql_col(:) = 0.
829	zh_qs_col(:) = 0.
830
831	!JLD write (,) "rcpd, zcpvap, zcwat, zcice ",rcpd, zcpvap, zcwat, zcice
832
833	! ------------------------------------------------
834	! Compute vertical sum for each atmospheric column
835	! ------------------------------------------------
836	DO k = 1, nlev
837	DO i = 1, nlon
838	! Watter mass
839	zqw_col(i) = zqw_col(i) + qv(i, k)*zairm(i, k)
840	zql_col(i) = zql_col(i) + ql(i, k)*zairm(i, k)
841	zqs_col(i) = zqs_col(i) + qs(i, k)*zairm(i, k)
842	! Kinetic Energy
843	zek_col(i) = zek_col(i) + 0.5(uu(i,k)2+vv(i,k)2)zairm(i, k)
844	! Air enthalpy : dry air, water vapour, liquid, solid
845	zh_dair_col(i) = zh_dair_col(i) + rcpd(1.-qv(i,k)-ql(i,k)-qs(i,k)) &
846	zairm(i, k)*temp(i, k)
847	zh_qw_col(i) = zh_qw_col(i) + zcpvaptemp(i, k) qv(i, k)*zairm(i, k) !jyg
848	zh_ql_col(i) = zh_ql_col(i) + (zcpvaptemp(i, k) - rlvtt)ql(i, k)*zairm(i, k) !jyg
849	zh_qs_col(i) = zh_qs_col(i) + (zcpvaptemp(i, k) - rlstt)qs(i, k)*zairm(i, k) !jyg
850	END DO
851	END DO
852	! compute total air enthalpy
853	zh_col(:) = zh_dair_col(:) + zh_qw_col(:) + zh_ql_col(:) + zh_qs_col(:)
854
855	END SUBROUTINE integr_v
856
857	SUBROUTINE prt_enerbil (text, itap)
858	!======================================================================
859	! Print enenrgy budget diagnotics for the 1D case
860	!======================================================================
861
862	!======================================================================
863	! Declarations
864	!======================================================================
865
866	USE dimphy, ONLY: klon, klev
867	USE phys_state_var_mod, ONLY : phys_tstep
868	USE phys_state_var_mod, ONLY : topsw, toplw, solsw, sollw, rain_con, snow_con
869	USE geometry_mod, ONLY: longitude_deg, latitude_deg
870	USE print_control_mod, ONLY: prt_level
871	USE cmp_seri_mod
872	USE phys_output_var_mod, ONLY : d_qw_col, d_ql_col, d_qs_col, d_qt_col, d_ek_col, d_h_dair_col &
873	& , d_h_qw_col, d_h_ql_col, d_h_qs_col, d_h_col
874	USE phys_local_var_mod, ONLY: evap, sens
875	USE phys_local_var_mod, ONLY: u_seri, v_seri, ql_seri, qs_seri, q_seri, t_seri &
876	& , rain_lsc, snow_lsc
877	USE climb_hq_mod, ONLY : d_h_col_vdf, f_h_bnd
878	IMPLICIT none
879	include "YOMCST.h"
880
881	! Arguments :
882	!------------
883	CHARACTER() text ! text specifing the involved parametrization
884	integer itap ! time step number
885	! local variables
886	! ---------------
887	real bilq_seuil, bilh_seuil ! thresold on error in Q and H budget
888	real bilq_error, bilh_error ! erros in Q and H budget
889	real bilq_bnd, bilh_bnd ! Q and H budget due to exchange with boundaries
890	integer bilq_ok, bilh_ok
891	CHARACTER*(12) status
892
893	bilq_seuil = 1.E-10
894	bilh_seuil = 1.E-1
895	bilq_ok=0
896	bilh_ok=0
897
898	!!print *,'prt_level:',prt_level,' fl_ebil:',fl_ebil,' fl_cor_ebil:',fl_cor_ebil
899	if ( (fl_ebil .GT. 0) .and. (klon .EQ. 1)) then
900
901	bilq_bnd = 0.
902	bilh_bnd = 0.
903
904	param: SELECT CASE (text)
905	CASE("vdf") param
906	bilq_bnd = evap(1)
907	bilh_bnd = sens(1)+(rcpv-rcpd)evap(1)t_seri(1,1)
908	CASE("lsc") param
909	bilq_bnd = - rain_lsc(1) - snow_lsc(1)
910	bilh_bnd = (-(rcw-rcpd)t_seri(1,1) + rlvtt) rain_lsc(1) &
911	& + (-(rcs-rcpd)t_seri(1,1) + rlstt) snow_lsc(1)
912	CASE("convection") param
913	bilq_bnd = - rain_con(1) - snow_con(1)
914	bilh_bnd = (-(rcw-rcpd)t_seri(1,1) + rlvtt) rain_con(1) &
915	& + (-(rcs-rcpd)t_seri(1,1) + rlstt) snow_con(1)
916	CASE("SW") param
917	bilh_bnd = topsw(1) - solsw(1)
918	CASE("LW") param
919	bilh_bnd = -(toplw(1) + sollw(1))
920	CASE DEFAULT param
921	bilq_bnd = 0.
922	bilh_bnd = 0.
923	END SELECT param
924
925	bilq_error = d_qt_col(1) - bilq_bnd
926	bilh_error = d_h_col(1) - bilh_bnd
927	! are the errors too large?
928	if ( abs(bilq_error) .gt. bilq_seuil) bilq_ok=1
929	if ( abs(bilh_error) .gt. bilh_seuil) bilh_ok=1
930	!
931	! Print diagnostics
932	! =================
933	if ( (bilq_ok .eq. 0).and.(bilh_ok .eq. 0) ) then
934	status="enerbil-OK"
935	else
936	status="enerbil-PB"
937	end if
938
939	if ( prt_level .GE. 3) then
940	write(*,9010) text,status," itap:",itap,"enerbilERROR: Q", bilq_error," H", bilh_error
941	9010 format (1x,A8,2x,A12,A6,I4,A18,E15.6,A5,E15.6)
942	end if
943	if ( prt_level .GE. 3) then
944	write(*,9000) text,"enerbil: Q,H,KE budget", d_qt_col(1), d_h_col(1),d_ek_col(1)
945	end if
946	if ( prt_level .GE. 5) then
947	write(*,9000) text,"enerbil at boundaries: Q, H",bilq_bnd, bilh_bnd
948	write(*,9000) text,"enerbil: water budget",d_qt_col(1),d_qw_col(1),d_ql_col(1),d_qs_col(1)
949	write(*,9000) text,"enerbil: enthalpy budget",d_h_col(1),d_h_dair_col(1),d_h_qw_col(1),d_h_ql_col(1),d_h_qs_col(1)
950	end if
951
952	specific_diag: SELECT CASE (text)
953	CASE("vdf") specific_diag
954	if ( prt_level .GE. 5) then
955	write(*,9000) text,"enerbil: d_h, bilh, sens,t_seri", d_h_col(1), bilh_bnd, sens(1), t_seri(1,1)
956	write(*,9000) text,"enerbil: d_h_col_vdf, f_h, diff",d_h_col_vdf, f_h_bnd, bilh_bnd-sens(1)
957	end if
958	CASE("lsc") specific_diag
959	if ( prt_level .GE. 5) then
960	write(,9000) text,"enerbil: rain, bil_lat, bil_sens", rain_lsc(1), rlvtt rain_lsc(1), -(rcw-rcpd)t_seri(1,1) rain_lsc(1)
961	write(,9000) text,"enerbil: snow, bil_lat, bil_sens", snow_lsc(1), rlstt snow_lsc(1), -(rcs-rcpd)t_seri(1,1) snow_lsc(1)
962	end if
963	CASE("convection") specific_diag
964	if ( prt_level .GE. 5) then
965	write(,9000) text,"enerbil: rain, bil_lat, bil_sens", rain_con(1), rlvtt rain_con(1), -(rcw-rcpd)t_seri(1,1) rain_con(1)
966	write(,9000) text,"enerbil: snow, bil_lat, bil_sens", snow_con(1), rlstt snow_con(1), -(rcs-rcpd)t_seri(1,1) snow_con(1)
967	end if
968	END SELECT specific_diag
969
970	9000 format (1x,A8,2x,A35,10E15.6)
971
972	end if ! end if (fl_ebil .GT. 0)
973
974	END SUBROUTINE prt_enerbil
975
976	END MODULE add_phys_tend_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format