Context Navigation

add_phys_tend_mod.F90 @ 5213

Last change on this file since 5213 was 5051, checked in by evignon, 4 months ago
petit changement dans add_phys_tend suite au renommage des tendances de neige soufflee
Property svn:keywords set to `Id`
File size: 36.0 KB

Rev	Line
[3927]	1	!
	2	! $Id: add_phys_tend_mod.F90 5051 2024-07-15 10:22:36Z evignon $
	3	!
	4	!
	5	MODULE add_phys_tend_mod
	6
	7	IMPLICIT NONE
	8	! flag to compute diagnostics to check energy conservation. If fl_ebil==0, no check
	9	INTEGER, SAVE :: fl_ebil
	10	!$OMP THREADPRIVATE(fl_ebil)
	11	! flag to include modifcations to ensure energy conservation. If fl_cor_ebil==0, no corrections
	12	! Note that with time, all these modifications should be included by default
	13	INTEGER, SAVE :: fl_cor_ebil
	14	!$OMP THREADPRIVATE(fl_cor_ebil)
	15
	16	CONTAINS
	17
[4523]	18	SUBROUTINE add_pbl_tend(zdu, zdv, zdt, zdq, zdql, zdqi, zdqbs, paprs, text,abortphy,flag_inhib_tend, itap &
[3927]	19	#ifdef ISO
	20	,zdxt,zdxtl,zdxti &
	21	#endif
	22	)
	23	! ======================================================================
	24	! Ajoute les tendances de couche limite, soit determinees par la
	25	! parametrisation
	26	! physique, soit forcees, aux variables d etat de la dynamique t_seri,
	27	! q_seri ...
	28	! ======================================================================
	29
	30
	31	! ======================================================================
	32	! Declarations
	33	! ======================================================================
	34
	35	USE dimphy, ONLY: klon, klev
	36	! USE dimphy
	37	USE phys_local_var_mod
	38	USE phys_state_var_mod
	39	USE mod_grid_phy_lmdz, ONLY: nbp_lev
	40	#ifdef ISO
[4143]	41	USE infotrac_phy, ONLY: ntraciso=>ntiso
[3927]	42	USE isotopes_mod, ONLY: iso_eau
	43	#endif
	44	IMPLICIT NONE
	45	REAL,SAVE,ALLOCATABLE :: hthturb_gcssold(:)
	46	REAL,SAVE,ALLOCATABLE :: hqturb_gcssold(:)
	47	!$OMP THREADPRIVATE(hthturb_gcssold,hqturb_gcssold)
	48	REAL,SAVE :: dtime_frcg
	49	LOGICAL,SAVE :: turb_fcg_gcssold
	50	LOGICAL,SAVE :: firstcall=.true.
	51	!$OMP THREADPRIVATE(firstcall,turb_fcg_gcssold,dtime_frcg)
	52	INTEGER abortphy
	53	! COMMON /turb_forcing/dtime_frcg, hthturb_gcssold, hqturb_gcssold, &
	54	! turb_fcg_gcssold
	55	#ifdef ISO
	56	REAL,SAVE,ALLOCATABLE :: hxtturb_gcssold(:,:)
	57	!$OMP THREADPRIVATE(hxtturb_gcssold)
	58	! variable à définir dans le 1D
	59	#endif
	60
	61	! Arguments :
	62	! ------------
	63	REAL zdu(klon, klev), zdv(klon, klev)
[4523]	64	REAL zdt(klon, klev), zdq(klon, klev), zdql(klon, klev), zdqi(klon, klev), zdqbs(klon,klev)
[3927]	65	CHARACTER () text
	66	REAL paprs(klon,klev+1)
	67	INTEGER flag_inhib_tend ! if flag_inhib_tend != 0, tendencies are not added
	68	INTEGER itap ! time step number
	69	#ifdef ISO
	70	REAL zdxt(ntraciso,klon, klev), zdxtl(ntraciso,klon, klev), zdxti(ntraciso,klon, klev)
	71	#endif
	72
	73	! Local :
	74	! --------
	75	REAL zzdt(klon, klev), zzdq(klon, klev)
	76	INTEGER i, k
	77	#ifdef ISO
	78	REAL zzdxt(ntraciso,klon, klev)
	79	INTEGER ixt
	80	#endif
	81
	82	IF (firstcall) THEN
	83	ALLOCATE(hthturb_gcssold(nbp_lev))
	84	ALLOCATE(hqturb_gcssold(nbp_lev))
	85	#ifdef ISO
	86	ALLOCATE(hxtturb_gcssold(ntraciso,nbp_lev))
	87	#endif
	88	firstcall=.false.
	89	ENDIF
	90
	91	IF (turb_fcg_gcssold) THEN
	92	DO k = 1, klev
	93	DO i = 1, klon
	94	zzdt(i, k) = hthturb_gcssold(k)*dtime_frcg
	95	zzdq(i, k) = hqturb_gcssold(k)*dtime_frcg
	96	#ifdef ISO
	97	do ixt=1,ntraciso
	98	zzdxt(ixt,i, k) = hxtturb_gcssold(ixt,k)*dtime_frcg
	99	enddo
	100	#endif
	101	END DO
	102	END DO
	103	PRINT *, ' add_pbl_tend, dtime_frcg ', dtime_frcg
	104	PRINT *, ' add_pbl_tend, zzdt ', zzdt
	105	PRINT *, ' add_pbl_tend, zzdq ', zzdq
[4523]	106	CALL add_phys_tend(zdu, zdv, zzdt, zzdq, zdql, zdqi, zdqbs, paprs, text,abortphy,flag_inhib_tend, itap, 0 &
[3927]	107	#ifdef ISO
	108	,zzdxt,zdxtl,zdxti &
	109	#endif
	110	)
	111	ELSE
[4523]	112	CALL add_phys_tend(zdu, zdv, zdt, zdq, zdql, zdqi, zdqbs, paprs, text,abortphy,flag_inhib_tend, itap, 0 &
[3927]	113	#ifdef ISO
	114	,zdxt,zdxtl,zdxti &
	115	#endif
	116	)
	117	END IF
	118
	119
	120	RETURN
	121	END SUBROUTINE add_pbl_tend
	122	!
[4004]	123	! $Id: add_phys_tend_mod.F90 5051 2024-07-15 10:22:36Z evignon $
[3927]	124	!
[4523]	125	SUBROUTINE add_phys_tend (zdu,zdv,zdt,zdq,zdql,zdqi,zdqbs,paprs,text, &
[3927]	126	abortphy,flag_inhib_tend, itap, diag_mode &
	127	#ifdef ISO
	128	,zdxt,zdxtl,zdxti &
	129	#endif
	130	)
	131	!======================================================================
	132	! Ajoute les tendances des variables physiques aux variables
	133	! d'etat de la dynamique t_seri, q_seri ...
	134	! On en profite pour faire des tests sur les tendances en question.
	135	!======================================================================
	136
	137
	138	!======================================================================
	139	! Declarations
	140	!======================================================================
	141
	142	USE dimphy, ONLY: klon, klev
	143	USE phys_state_var_mod, ONLY : phys_tstep
[4523]	144	USE phys_local_var_mod, ONLY: u_seri, v_seri, ql_seri, qs_seri, qbs_seri, q_seri, t_seri
[3927]	145	#ifdef ISO
	146	USE phys_local_var_mod, ONLY: xtl_seri, xts_seri, xt_seri
	147	#endif
	148	USE phys_state_var_mod, ONLY: ftsol
	149	USE geometry_mod, ONLY: longitude_deg, latitude_deg
	150	USE print_control_mod, ONLY: prt_level
	151	USE cmp_seri_mod
[4523]	152	USE phys_output_var_mod, ONLY : d_qw_col, d_ql_col, d_qs_col, d_qbs_col, d_qt_col, d_ek_col, d_h_dair_col &
	153	& , d_h_qw_col, d_h_ql_col, d_h_qs_col, d_h_qbs_col, d_h_col
[3927]	154
	155	#ifdef ISO
[4143]	156	USE infotrac_phy, ONLY: ntraciso=>ntiso
[3927]	157	#ifdef ISOVERIF
	158	USE isotopes_mod, ONLY: iso_eau
	159	USE isotopes_verif_mod
	160	#endif
	161	#endif
	162	IMPLICIT none
	163	include "YOMCST.h"
	164	include "clesphys.h"
	165
	166	! Arguments :
	167	!------------
	168	REAL, DIMENSION(klon,klev), INTENT(IN) :: zdu, zdv
[4523]	169	REAL, DIMENSION(klon,klev), INTENT(IN) :: zdt, zdql, zdqi, zdqbs
[3927]	170	REAL, DIMENSION(klon,klev+1), INTENT(IN) :: paprs
	171	CHARACTER(), INTENT(IN) :: text
	172	INTEGER, INTENT(IN) :: abortphy
	173	INTEGER, INTENT(IN) :: flag_inhib_tend ! if not 0, tendencies are not added
	174	INTEGER, INTENT(IN) :: itap ! time step number
	175	INTEGER, INTENT(IN) :: diag_mode ! 0 -> normal effective mode
	176	! 1 -> only conservation stats are computed
	177	!
	178	REAL, DIMENSION(klon,klev), INTENT(INOUT) :: zdq
	179	#ifdef ISO
	180	REAL zdxt(ntraciso,klon,klev),zdxtl(ntraciso,klon,klev) &
	181	,zdxti(ntraciso,klon,klev)
	182	integer ixt
	183	#endif
	184
	185	! Local :
	186	!--------
	187	REAL zt,zq
	188	#ifdef ISO
	189	REAL zxt(ntraciso)
	190	real qprec(klon,klev)
	191	REAL zxt_int(ntraciso), zxtp_int(ntraciso), zxtp(ntraciso,klev),zxt_new
	192	#endif
	193	REAL zq_int, zqp_int, zq_new
	194
	195	REAL zqp(klev)
	196
	197	! Save variables, used in diagnostic mode (diag_mode=1).
	198	REAL, DIMENSION(klon,klev) :: sav_u_seri, sav_v_seri
[4523]	199	REAL, DIMENSION(klon,klev) :: sav_ql_seri, sav_qs_seri, sav_qbs_seri, sav_q_seri
[3927]	200	REAL, DIMENSION(klon,klev) :: sav_t_seri
	201	REAL, DIMENSION(klon,klev) :: sav_zdq
	202	#ifdef ISO
	203	REAL, DIMENSION(ntraciso,klon,klev) :: sav_zdxt
	204	REAL, DIMENSION(ntraciso,klon,klev) :: sav_xtl_seri, sav_xts_seri, sav_xt_seri
	205	#endif
	206	!
	207	INTEGER i, k,j, n
	208	INTEGER jadrs(klon*klev), jbad
	209	INTEGER jqadrs(klon*klev), jqbad
	210	INTEGER kadrs(klon*klev)
	211	INTEGER kqadrs(klon*klev)
	212
	213	LOGICAL done(klon)
	214
	215	integer debug_level
	216	logical, save :: first=.true.
	217	!$OMP THREADPRIVATE(first)
	218	!
	219	!======================================================================
	220	! Variables for energy conservation tests
	221	!======================================================================
	222	!
	223
	224	! zh_col------- total enthalpy of vertical air column
	225	! (air with watter vapour, liquid and solid) (J/m2)
	226	! zh_dair_col--- total enthalpy of dry air (J/m2)
	227	! zh_qw_col---- total enthalpy of watter vapour (J/m2)
	228	! zh_ql_col---- total enthalpy of liquid watter (J/m2)
	229	! zh_qs_col---- total enthalpy of solid watter (J/m2)
[4523]	230	! zh_qbs_col---- total enthalpy of blowing snow (J/m2)
[3927]	231	! zqw_col------ total mass of watter vapour (kg/m2)
	232	! zql_col------ total mass of liquid watter (kg/m2)
[4523]	233	! zqs_col------ total mass of cloud ice (kg/m2)
	234	! zqbs_col------ total mass of blowing snow (kg/m2)
[3927]	235	! zek_col------ total kinetic energy (kg/m2)
	236	!
	237	REAL zairm(klon, klev) ! layer air mass (kg/m2)
	238	REAL zqw_col(klon,2)
	239	REAL zql_col(klon,2)
	240	REAL zqs_col(klon,2)
[4523]	241	REAL zqbs_col(klon,2)
[3927]	242	REAL zek_col(klon,2)
	243	REAL zh_dair_col(klon,2)
[4523]	244	REAL zh_qw_col(klon,2), zh_ql_col(klon,2), zh_qs_col(klon,2), zh_qbs_col(klon,2)
[3927]	245	REAL zh_col(klon,2)
	246
	247	REAL zcpvap, zcwat, zcice
	248
	249	!======================================================================
	250	! Initialisations
	251
	252	IF (prt_level >= 5) then
	253	write (,) "In add_phys_tend, after ",text
	254	call flush
	255	end if
	256
	257	! if flag_inhib_tend != 0, tendencies are not added
	258	IF (flag_inhib_tend /= 0) then
	259	! If requiered, diagnostics are shown
	260	IF (flag_inhib_tend > 0) then
	261	! print some diagnostics if xxx_seri have changed
	262	call cmp_seri(flag_inhib_tend,text)
	263	END IF
	264	RETURN ! on n ajoute pas les tendance
	265	END IF
	266
	267	IF (abortphy==1) RETURN ! on n ajoute pas les tendance si le modele
	268	! a deja plante.
	269
	270	debug_level=10
	271	if (first) then
	272	print *,"TestJLD rcpv, rcw, rcs",rcpv, rcw, rcs
	273	first=.false.
	274	endif
	275	!
	276	! print *,'add_phys_tend: paprs ',paprs
	277	! When in diagnostic mode, save initial values of out variables
	278	IF (diag_mode == 1) THEN
	279	sav_u_seri(:,:) = u_seri(:,:)
	280	sav_v_seri(:,:) = v_seri(:,:)
	281	sav_ql_seri(:,:) = ql_seri(:,:)
	282	sav_qs_seri(:,:) = qs_seri(:,:)
[4523]	283	sav_qbs_seri(:,:) = qbs_seri(:,:)
[3927]	284	sav_q_seri(:,:) = q_seri(:,:)
	285	sav_t_seri(:,:) = t_seri(:,:)
	286	sav_zdq(:,:) = zdq(:,:)
	287	#ifdef ISO
	288	sav_zdxt(:,:,:) = zdxt(:,:,:)
	289	#endif
	290	ENDIF ! (diag_mode == 1)
	291	!======================================================================
	292	! Diagnostics for energy conservation tests
	293	!======================================================================
	294	DO k = 1, klev
	295	! layer air mass
	296	zairm(:, k) = (paprs(:,k)-paprs(:,k+1))/rg
	297	END DO
	298
	299	if (fl_ebil .GT. 0) then
	300	! ------------------------------------------------
	301	! Compute vertical sum for each atmospheric column
	302	! ------------------------------------------------
	303	n=1 ! begining of time step
	304
	305	zcpvap = rcpv
	306	zcwat = rcw
	307	zcice = rcs
	308
	309	CALL integr_v(klon, klev, zcpvap, &
[4523]	310	t_seri, q_seri, ql_seri, qs_seri, qbs_seri, u_seri, v_seri, zairm, &
	311	zqw_col(:,n), zql_col(:,n), zqs_col(:,n), zqbs_col(:,n), zek_col(:,n), zh_dair_col(:,n), &
	312	zh_qw_col(:,n), zh_ql_col(:,n), zh_qs_col(:,n), zh_qbs_col(:,n), zh_col(:,n))
[3927]	313
	314	end if ! end if (fl_ebil .GT. 0)
	315
	316	!======================================================================
	317	! Ajout des tendances sur le vent et l'eau liquide
	318	!======================================================================
	319
[4491]	320	#ifdef ISO
	321	#ifdef ISOVERIF
	322	if (iso_eau.gt.0) then
	323	call iso_verif_egalite_vect2D( &
	324	xt_seri,q_seri, &
	325	'add_phys_tend 321a: '//text,ntraciso,klon,klev)
	326	call iso_verif_egalite_vect2D( &
	327	xtl_seri,ql_seri, &
	328	'add_phys_tend 321b: '//text,ntraciso,klon,klev)
	329	endif !if (iso_eau.gt.0) then
	330	#ifdef ISOTRAC
	331	call iso_verif_traceur_vect(xt_seri,klon,klev, &
	332	& 'add_phys_tend 328a: '//text)
	333	call iso_verif_traceur_vect(xtl_seri,klon,klev, &
	334	& 'add_phys_tend 328b: '//text)
	335	#endif
	336	#endif
	337	#endif
	338
[3927]	339	u_seri(:,:)=u_seri(:,:)+zdu(:,:)
	340	v_seri(:,:)=v_seri(:,:)+zdv(:,:)
	341	ql_seri(:,:)=ql_seri(:,:)+zdql(:,:)
	342	qs_seri(:,:)=qs_seri(:,:)+zdqi(:,:)
[4523]	343	qbs_seri(:,:)=qbs_seri(:,:)+zdqbs(:,:)
[3927]	344	#ifdef ISO
	345	xtl_seri(:,:,:)=xtl_seri(:,:,:)+zdxtl(:,:,:)
	346	xts_seri(:,:,:)=xts_seri(:,:,:)+zdxti(:,:,:)
	347	#endif
	348
	349	!======================================================================
	350	! On ajoute les tendances de la temperature et de la vapeur d'eau
	351	! en verifiant que ca ne part pas dans les choux
	352	!======================================================================
	353
	354	jbad=0
	355	jqbad=0
	356	DO k = 1, klev
	357	DO i = 1, klon
	358	zt=t_seri(i,k)+zdt(i,k)
	359	zq=q_seri(i,k)+zdq(i,k)
	360	#ifdef ISO
	361	do ixt=1,ntraciso
	362	zxt(ixt)=xt_seri(ixt,i,k)+zdxt(ixt,i,k)
	363	enddo !do ixt=1,ntraciso
	364	qprec(i,k)=q_seri(i,k)
	365	#endif
	366	IF ( zt>370. .or. zt<130. .or. abs(zdt(i,k))>50. ) then
	367	jbad = jbad + 1
	368	jadrs(jbad) = i
	369	kadrs(jbad) = k
	370	ENDIF
	371	IF ( zq<0. .or. zq>0.1 .or. abs(zdq(i,k))>1.e-2 ) then
	372	jqbad = jqbad + 1
	373	jqadrs(jqbad) = i
	374	kqadrs(jqbad) = k
	375	ENDIF
	376	t_seri(i,k)=zt
	377	q_seri(i,k)=zq
	378	#ifdef ISO
	379	do ixt=1,ntraciso
	380	xt_seri(ixt,i,k)=zxt(ixt)
	381	enddo !do ixt=1,ntraciso
	382	#endif
	383	ENDDO
	384	ENDDO
	385
	386	#ifdef ISO
	387	#ifdef ISOVERIF
	388	if (iso_eau.gt.0) then
	389	call iso_verif_egalite_vect2D( &
	390	xt_seri,q_seri, &
	391	'add_phys_tend 122: '//text,ntraciso,klon,klev)
	392	call iso_verif_egalite_vect2D( &
	393	xtl_seri,ql_seri, &
	394	'add_phys_tend 138: '//text,ntraciso,klon,klev)
	395	endif !if (iso_eau.gt.0) then
[4491]	396	#ifdef ISOTRAC
	397	call iso_verif_traceur_vect(xt_seri,klon,klev, &
	398	& 'add_phys_tend 374a: '//text)
	399	call iso_verif_traceur_vect(xtl_seri,klon,klev, &
	400	& 'add_phys_tend 374b: '//text)
[3927]	401	#endif
	402	#endif
[4491]	403	#endif
[3927]	404
	405
	406	!=====================================================================================
	407	! Impression et stop en cas de probleme important
	408	!=====================================================================================
	409
	410	IF (jbad .GT. 0) THEN
	411	DO j = 1, jbad
	412	i=jadrs(j)
	413	if(prt_level.ge.debug_level) THEN
	414	print*,'PLANTAGE POUR LE POINT i lon lat =',&
	415	i,longitude_deg(i),latitude_deg(i),text
	416	print*,'l T dT Q dQ '
	417	DO k = 1, klev
	418	write(*,'(i3,2f14.4,2e14.2)') k,t_seri(i,k),zdt(i,k),q_seri(i,k),zdq(i,k)
	419	ENDDO
	420	call print_debug_phys(i,debug_level,text)
	421	endif
	422	ENDDO
	423	ENDIF
	424	!
	425	!=====================================================================================
	426	! Impression, warning et correction en cas de probleme moins important
	427	!=====================================================================================
	428	IF (jqbad .GT. 0) THEN
	429	done(:) = .false. !jyg
	430	DO j = 1, jqbad
	431	i=jqadrs(j)
	432	if(prt_level.ge.debug_level) THEN
	433	print*,'WARNING : EAU POUR LE POINT i lon lat =',&
	434	i,longitude_deg(i),latitude_deg(i),text
	435	print*,'l T dT Q dQ '
	436	DO k = 1, klev
	437	write(*,'(i3,2f14.4,2e14.2)') k,t_seri(i,k),zdt(i,k),q_seri(i,k),zdq(i,k)
	438	ENDDO
	439	endif
	440	IF (ok_conserv_q) THEN
	441	!jyg<20140228 Corrections pour conservation de l'eau
	442	IF (.NOT.done(i)) THEN !jyg
	443	DO k = 1, klev
	444	zqp(k) = max(q_seri(i,k),1.e-15)
	445	#ifdef ISO
	446	do ixt=1,ntraciso
	447	zxtp(ixt,k)=xt_seri(ixt,i,k)*max(1.0,1.e-15/qprec(i,k))
	448	enddo
	449	#endif
	450	ENDDO
	451	zq_int = 0.
	452	zqp_int = 0.
	453	DO k = 1, klev
	454	zq_int = zq_int + q_seri(i,k)*(paprs(i,k)-paprs(i,k+1))/Rg
	455	zqp_int = zqp_int + zqp(k) *(paprs(i,k)-paprs(i,k+1))/Rg
	456	ENDDO
	457	#ifdef ISO
	458	do ixt=1,ntraciso
	459	zxt_int(ixt) = 0.
	460	zxtp_int(ixt) = 0.
	461	DO k = 1, klev
	462	zxt_int(ixt) = zxt_int(ixt) + xt_seri(ixt,i,k)*(paprs(i,k)-paprs(i,k+1))/Rg
	463	zxtp_int(ixt) = zxtp_int(ixt) + zxtp(ixt,k) *(paprs(i,k)-paprs(i,k+1))/Rg
	464	ENDDO
	465	enddo
	466	#endif
	467	if(prt_level.ge.debug_level) THEN
	468	print*,' cas q_seri<1.e-15 i k zq_int zqp_int zq_int/zqp_int :', &
	469	i, kqadrs(j), zq_int, zqp_int, zq_int/zqp_int
	470	endif
	471	DO k = 1, klev
	472	zq_new = zqp(k)*zq_int/zqp_int
	473	zdq(i,k) = zdq(i,k) + zq_new - q_seri(i,k)
	474	q_seri(i,k) = zq_new
	475	#ifdef ISO
	476	do ixt=1,ntraciso
	477	zxt_new = zxtp(ixt,k)*zxt_int(ixt)/zxtp_int(ixt)
	478	zdxt(ixt,i,k) = zdxt(ixt,i,k) + zxt_new - xt_seri(ixt,i,k)
	479	xt_seri(ixt,i,k) = zxt_new
	480	enddo !ixt=1,ntraciso
	481	#endif
	482	ENDDO
	483	done(i) = .true.
	484	ENDIF !(.NOT.done(i))
	485	ELSE
	486	!jyg>
	487	DO k = 1, klev
	488	zq=q_seri(i,k)+zdq(i,k)
	489	if (zq.lt.1.e-15) then
	490	if (q_seri(i,k).lt.1.e-15) then
	491	if(prt_level.ge.debug_level) THEN
	492	print*,' cas q_seri<1.e-15 i k q_seri zq zdq :',i,k,q_seri(i,k),zq,zdq(i,k)
	493	endif
	494	q_seri(i,k)=1.e-15
	495	zdq(i,k)=(1.e-15-q_seri(i,k))
	496	#ifdef ISO
	497	do ixt=1,ntraciso
	498	xt_seri(ixt,i,k)=1.e-15*(xt_seri(ixt,i,k)/qprec(i,k))
	499	! xt_seri(ixt,i,k)=1.e-15*(Rdefault(index_iso(ixt)))
	500	! zdxt(ixt,i,k)=0.0
	501	zdxt(ixt,i,k)=xt_seri(ixt,i,k)*(1.e-15/qprec(i,k)-1)
	502	enddo !do ixt=1,ntraciso
	503	#endif
	504	endif
	505	endif
	506	! zq=q_seri(i,k)+zdq(i,k)
	507	! if (zq.lt.1.e-15) then
	508	! zdq(i,k)=(1.e-15-q_seri(i,k))
	509	! endif
	510	ENDDO
	511	!jyg<20140228
	512	ENDIF ! (ok_conserv_q)
	513	!jyg>
	514	ENDDO ! j = 1, jqbad
	515	ENDIF
	516
	517	#ifdef ISO
	518	#ifdef ISOVERIF
	519	if (iso_eau.gt.0) then
	520	call iso_verif_egalite_vect2D( &
	521	xt_seri,q_seri, &
	522	'add_phys_tend 173'//text,ntraciso,klon,klev)
	523	call iso_verif_egalite_vect2D( &
	524	zdxt,zdq, &
	525	'add_phys_tend 175'//text,ntraciso,klon,klev)
	526	endif !if (iso_eau.gt.0) then
[4491]	527	#ifdef ISOTRAC
	528	call iso_verif_traceur_vect(xt_seri,klon,klev, &
	529	& 'add_phys_tend 499'//text)
[3927]	530	#endif
	531	#endif
[4491]	532	#endif
[3927]	533	!
	534
	535	!IM ajout memes tests pour reverifier les jbad, jqbad beg
	536	jbad=0
	537	jqbad=0
	538	DO k = 1, klev
	539	DO i = 1, klon
	540	IF ( t_seri(i,k)>370. .or. t_seri(i,k)<130. .or. abs(zdt(i,k))>50. ) then
	541	jbad = jbad + 1
	542	jadrs(jbad) = i
	543	! if(prt_level.ge.debug_level) THEN
	544	! print*,'cas2 i k t_seri zdt',i,k,t_seri(i,k),zdt(i,k)
	545	! endif
	546	ENDIF
	547	IF ( q_seri(i,k)<0. .or. q_seri(i,k)>0.1 .or. abs(zdq(i,k))>1.e-2 ) then
	548	jqbad = jqbad + 1
	549	jqadrs(jqbad) = i
	550	kqadrs(jqbad) = k
	551	! if(prt_level.ge.debug_level) THEN
	552	! print*,'cas2 i k q_seri zdq',i,k,q_seri(i,k),zdq(i,k)
	553	! endif
	554	ENDIF
	555	ENDDO
	556	ENDDO
	557	IF (jbad .GT. 0) THEN
	558	DO j = 1, jbad
	559	i=jadrs(j)
	560	k=kadrs(j)
	561	if(prt_level.ge.debug_level) THEN
	562	print*,'PLANTAGE2 POUR LE POINT i itap lon lat txt jbad zdt t',&
	563	i,itap,longitude_deg(i),latitude_deg(i),text,jbad, &
	564	& zdt(i,k),t_seri(i,k)-zdt(i,k)
	565	!!! if(prt_level.ge.10.and.itap.GE.229.and.i.EQ.3027) THEN
	566	print*,'l T dT Q dQ '
	567	DO k = 1, klev
	568	write(*,'(i3,2f14.4,2e14.2)') k,t_seri(i,k),zdt(i,k),q_seri(i,k),zdq(i,k)
	569	ENDDO
	570	call print_debug_phys(i,debug_level,text)
	571	endif
	572	ENDDO
	573	ENDIF
	574	!
	575	IF (jqbad .GT. 0) THEN
	576	DO j = 1, jqbad
	577	i=jqadrs(j)
	578	k=kqadrs(j)
	579	if(prt_level.ge.debug_level) THEN
	580	print*,'WARNING : EAU2 POUR LE POINT i itap lon lat txt jqbad zdq q zdql ql',&
	581	i,itap,longitude_deg(i),latitude_deg(i),text,jqbad,&
	582	& zdq(i,k), q_seri(i,k)-zdq(i,k), zdql(i,k), ql_seri(i,k)-zdql(i,k)
	583	!!! if(prt_level.ge.10.and.itap.GE.229.and.i.EQ.3027) THEN
	584	print*,'l T dT Q dQ '
	585	DO k = 1, klev
	586	write(*,'(i3,2f14.4,2e14.2)') k,t_seri(i,k),zdt(i,k),q_seri(i,k),zdq(i,k)
	587	ENDDO
	588	call print_debug_phys(i,debug_level,text)
	589	endif
	590	ENDDO
	591	ENDIF
	592
	593	!======================================================================
	594	! Contrôle des min/max pour arrêt du modèle
	595	! Si le modele est en mode abortphy, on retire les tendances qu'on
	596	! vient d'ajouter. Pas exactement parce qu'on ne tient pas compte des
	597	! seuils.
	598	!======================================================================
	599
	600	CALL hgardfou(t_seri,ftsol,text,abortphy)
	601	IF (abortphy==1) THEN
	602	Print*,'ERROR ABORT hgardfou dans ',text
	603	! JLD pourquoi on ne modifie pas de meme t_seri et q_seri ?
	604	u_seri(:,:)=u_seri(:,:)-zdu(:,:)
	605	v_seri(:,:)=v_seri(:,:)-zdv(:,:)
	606	ql_seri(:,:)=ql_seri(:,:)-zdql(:,:)
	607	qs_seri(:,:)=qs_seri(:,:)-zdqi(:,:)
[4523]	608	qbs_seri(:,:)=qbs_seri(:,:)-zdqbs(:,:)
[3927]	609	ENDIF
	610
	611	!======================================================================
	612	! Diagnostics for energy conservation tests
	613	!======================================================================
	614
	615	if (fl_ebil .GT. 0) then
	616
	617	! ------------------------------------------------
	618	! Compute vertical sum for each atmospheric column
	619	! ------------------------------------------------
	620	n=2 ! end of time step
	621
	622	CALL integr_v(klon, klev, zcpvap, &
[4523]	623	t_seri, q_seri, ql_seri, qs_seri, qbs_seri, u_seri, v_seri, zairm, &
	624	zqw_col(:,n), zql_col(:,n), zqs_col(:,n), zqbs_col(:,n), zek_col(:,n), zh_dair_col(:,n), &
	625	zh_qw_col(:,n), zh_ql_col(:,n), zh_qs_col(:,n), zh_qbs_col(:,n), zh_col(:,n))
[3927]	626
	627	! ------------------------------------------------
	628	! Compute the changes by unit of time
	629	! ------------------------------------------------
	630
	631	d_qw_col(:) = (zqw_col(:,2)-zqw_col(:,1))/phys_tstep
	632	d_ql_col(:) = (zql_col(:,2)-zql_col(:,1))/phys_tstep
	633	d_qs_col(:) = (zqs_col(:,2)-zqs_col(:,1))/phys_tstep
[4523]	634	d_qbs_col(:) = (zqbs_col(:,2)-zqbs_col(:,1))/phys_tstep
	635	d_qt_col(:) = d_qw_col(:) + d_ql_col(:) + d_qs_col(:) + d_qbs_col(:)
[3927]	636
	637	d_ek_col(:) = (zek_col(:,2)-zek_col(:,1))/phys_tstep
	638
	639	d_h_dair_col(:) = (zh_dair_col(:,2)-zh_dair_col(:,1))/phys_tstep
	640	d_h_qw_col(:) = (zh_qw_col(:,2)-zh_qw_col(:,1))/phys_tstep
	641	d_h_ql_col(:) = (zh_ql_col(:,2)-zh_ql_col(:,1))/phys_tstep
	642	d_h_qs_col(:) = (zh_qs_col(:,2)-zh_qs_col(:,1))/phys_tstep
[4523]	643	d_h_qbs_col(:) = (zh_qbs_col(:,2)-zh_qbs_col(:,1))/phys_tstep
[3927]	644
	645	d_h_col = (zh_col(:,2)-zh_col(:,1))/phys_tstep
	646
	647	end if ! end if (fl_ebil .GT. 0)
	648	!
	649	! When in diagnostic mode, restore "out" variables to initial values.
	650	IF (diag_mode == 1) THEN
	651	u_seri(:,:) = sav_u_seri(:,:)
	652	v_seri(:,:) = sav_v_seri(:,:)
	653	ql_seri(:,:) = sav_ql_seri(:,:)
	654	qs_seri(:,:) = sav_qs_seri(:,:)
[4523]	655	qbs_seri(:,:) = sav_qbs_seri(:,:)
[3927]	656	q_seri(:,:) = sav_q_seri(:,:)
	657	t_seri(:,:) = sav_t_seri(:,:)
	658	zdq(:,:) = sav_zdq(:,:)
	659	#ifdef ISO
	660	xtl_seri(:,:,:) = sav_xtl_seri(:,:,:)
	661	xts_seri(:,:,:) = sav_xts_seri(:,:,:)
	662	xt_seri(:,:,:) = sav_xt_seri(:,:,:)
	663	zdxt(:,:,:) = sav_zdxt(:,:,:)
	664	#endif
	665	ENDIF ! (mode == 1)
	666
	667	RETURN
	668	END SUBROUTINE add_phys_tend
	669
[4523]	670	SUBROUTINE diag_phys_tend (nlon, nlev, uu, vv, temp, qv, ql, qs, qbs, &
	671	zdu,zdv,zdt,zdq,zdql,zdqs,zdqbs,paprs,text)
[3927]	672	!======================================================================
	673	! Ajoute les tendances des variables physiques aux variables
	674	! d'etat de la dynamique t_seri, q_seri ...
	675	! On en profite pour faire des tests sur les tendances en question.
	676	!======================================================================
	677	! C Risi: on ne met pas les isos dedans car elle n'est jamais apelée.
	678
	679	!======================================================================
	680	! Declarations
	681	!======================================================================
	682
	683	USE phys_state_var_mod, ONLY : phys_tstep, ftsol
	684	USE geometry_mod, ONLY: longitude_deg, latitude_deg
	685	USE print_control_mod, ONLY: prt_level
	686	USE cmp_seri_mod
[4523]	687	USE phys_output_var_mod, ONLY : d_qw_col, d_ql_col, d_qs_col, d_qbs_col, d_qt_col, d_ek_col, d_h_dair_col &
	688	& , d_h_qw_col, d_h_ql_col, d_h_qs_col, d_h_qbs_col, d_h_col
[3927]	689	IMPLICIT none
	690	include "YOMCST.h"
	691	include "clesphys.h"
	692
	693	! Arguments :
	694	!------------
	695	INTEGER, INTENT(IN) :: nlon, nlev
	696	REAL, DIMENSION(nlon,nlev), INTENT(IN) :: uu, vv
[4523]	697	REAL, DIMENSION(nlon,nlev), INTENT(IN) :: temp, qv, ql, qs, qbs
[3927]	698	REAL, DIMENSION(nlon,nlev), INTENT(IN) :: zdu, zdv
[4523]	699	REAL, DIMENSION(nlon,nlev), INTENT(IN) :: zdt, zdq, zdql, zdqs, zdqbs
[3927]	700	REAL, DIMENSION(nlon,nlev+1), INTENT(IN) :: paprs
	701	CHARACTER(), INTENT(IN) :: text
	702
	703	! Local :
	704	!--------
	705	REAL, DIMENSION(nlon,nlev) :: uu_n, vv_n
[4523]	706	REAL, DIMENSION(nlon,nlev) :: temp_n, qv_n, ql_n, qs_n, qbs_n
[3927]	707
	708
	709	!
	710	INTEGER k, n
	711
	712	integer debug_level
	713	logical, save :: first=.true.
	714	!$OMP THREADPRIVATE(first)
	715	!
	716	!======================================================================
	717	! Variables for energy conservation tests
	718	!======================================================================
	719	!
	720
	721	! zh_col------- total enthalpy of vertical air column
	722	! (air with watter vapour, liquid and solid) (J/m2)
	723	! zh_dair_col--- total enthalpy of dry air (J/m2)
	724	! zh_qw_col---- total enthalpy of watter vapour (J/m2)
	725	! zh_ql_col---- total enthalpy of liquid watter (J/m2)
	726	! zh_qs_col---- total enthalpy of solid watter (J/m2)
	727	! zqw_col------ total mass of watter vapour (kg/m2)
	728	! zql_col------ total mass of liquid watter (kg/m2)
[4523]	729	! zqs_col------ total mass of cloud ice (kg/m2)
	730	! zqbs_col------ total mass of blowing snow (kg/m2)
[3927]	731	! zek_col------ total kinetic energy (kg/m2)
	732	!
	733	REAL zairm(nlon, nlev) ! layer air mass (kg/m2)
	734	REAL zqw_col(nlon,2)
	735	REAL zql_col(nlon,2)
	736	REAL zqs_col(nlon,2)
[4523]	737	REAL zqbs_col(nlon,2)
[3927]	738	REAL zek_col(nlon,2)
	739	REAL zh_dair_col(nlon,2)
[4523]	740	REAL zh_qw_col(nlon,2), zh_ql_col(nlon,2), zh_qs_col(nlon,2), zh_qbs_col(nlon,2)
[3927]	741	REAL zh_col(nlon,2)
	742
	743	!======================================================================
	744	! Initialisations
	745
	746	IF (prt_level >= 5) then
	747	write (,) "In diag_phys_tend, after ",text
	748	call flush
	749	end if
	750
	751	debug_level=10
	752	if (first) then
	753	print *,"TestJLD rcpv, rcw, rcs",rcpv, rcw, rcs
	754	first=.false.
	755	endif
	756	!
	757	! print *,'add_phys_tend: paprs ',paprs
	758	!======================================================================
	759	! Diagnostics for energy conservation tests
	760	!======================================================================
	761	DO k = 1, nlev
	762	! layer air mass
	763	zairm(:, k) = (paprs(:,k)-paprs(:,k+1))/rg
	764	END DO
	765
	766	if (fl_ebil .GT. 0) then
	767	! ------------------------------------------------
	768	! Compute vertical sum for each atmospheric column
	769	! ------------------------------------------------
	770	n=1 ! begining of time step
	771
	772	CALL integr_v(nlon, nlev, rcpv, &
[4523]	773	temp, qv, ql, qs, qbs, uu, vv, zairm, &
	774	zqw_col(:,n), zql_col(:,n), zqs_col(:,n), zqbs_col(:,n), zek_col(:,n), zh_dair_col(:,n), &
	775	zh_qw_col(:,n), zh_ql_col(:,n), zh_qs_col(:,n), zh_qbs_col(:,n), zh_col(:,n))
[3927]	776
	777	end if ! end if (fl_ebil .GT. 0)
	778
	779	!======================================================================
	780	! Ajout des tendances sur le vent, la temperature et les diverses phases de l'eau
	781	!======================================================================
	782
	783	uu_n(:,:)=uu(:,:)+zdu(:,:)
	784	vv_n(:,:)=vv(:,:)+zdv(:,:)
	785	qv_n(:,:)=qv(:,:)+zdq(:,:)
	786	ql_n(:,:)=ql(:,:)+zdql(:,:)
	787	qs_n(:,:)=qs(:,:)+zdqs(:,:)
[4523]	788	qbs_n(:,:)=qbs(:,:)+zdqbs(:,:)
[3927]	789	temp_n(:,:)=temp(:,:)+zdt(:,:)
	790
	791
	792
	793	!======================================================================
	794	! Diagnostics for energy conservation tests
	795	!======================================================================
	796
	797	if (fl_ebil .GT. 0) then
	798
	799	! ------------------------------------------------
	800	! Compute vertical sum for each atmospheric column
	801	! ------------------------------------------------
	802	n=2 ! end of time step
	803
	804	CALL integr_v(nlon, nlev, rcpv, &
[4523]	805	temp_n, qv_n, ql_n, qs_n, qbs_n, uu_n, vv_n, zairm, &
	806	zqw_col(:,n), zql_col(:,n), zqs_col(:,n), zqbs_col(:,n), zek_col(:,n), zh_dair_col(:,n), &
	807	zh_qw_col(:,n), zh_ql_col(:,n), zh_qs_col(:,n), zh_qbs_col(:,n), zh_col(:,n))
[3927]	808
	809	! ------------------------------------------------
	810	! Compute the changes by unit of time
	811	! ------------------------------------------------
	812
	813	d_qw_col(:) = (zqw_col(:,2)-zqw_col(:,1))/phys_tstep
	814	d_ql_col(:) = (zql_col(:,2)-zql_col(:,1))/phys_tstep
	815	d_qs_col(:) = (zqs_col(:,2)-zqs_col(:,1))/phys_tstep
[4523]	816	d_qbs_col(:) = (zqbs_col(:,2)-zqbs_col(:,1))/phys_tstep
	817	d_qt_col(:) = d_qw_col(:) + d_ql_col(:) + d_qs_col(:) + d_qbs_col(:)
[3927]	818
	819	d_ek_col(:) = (zek_col(:,2)-zek_col(:,1))/phys_tstep
	820
	821	print *,'zdu ', zdu
	822	print *,'zdv ', zdv
	823	print *,'d_ek_col, zek_col(2), zek_col(1) ',d_ek_col(1), zek_col(1,2), zek_col(1,1)
	824
	825	d_h_dair_col(:) = (zh_dair_col(:,2)-zh_dair_col(:,1))/phys_tstep
	826	d_h_qw_col(:) = (zh_qw_col(:,2)-zh_qw_col(:,1))/phys_tstep
	827	d_h_ql_col(:) = (zh_ql_col(:,2)-zh_ql_col(:,1))/phys_tstep
	828	d_h_qs_col(:) = (zh_qs_col(:,2)-zh_qs_col(:,1))/phys_tstep
[4523]	829	d_h_qbs_col(:) = (zh_qbs_col(:,2)-zh_qbs_col(:,1))/phys_tstep
[3927]	830
	831	d_h_col = (zh_col(:,2)-zh_col(:,1))/phys_tstep
	832
	833	end if ! end if (fl_ebil .GT. 0)
	834	!
	835
	836	RETURN
	837	END SUBROUTINE diag_phys_tend
	838
	839	SUBROUTINE integr_v(nlon, nlev, zcpvap, &
[4523]	840	temp, qv, ql, qs, qbs, uu, vv, zairm, &
	841	zqw_col, zql_col, zqs_col, zqbs_col, zek_col, zh_dair_col, &
	842	zh_qw_col, zh_ql_col, zh_qs_col, zh_qbs_col, zh_col)
[3927]	843
	844	IMPLICIT none
	845	include "YOMCST.h"
	846
	847	INTEGER, INTENT(IN) :: nlon,nlev
	848	REAL, INTENT(IN) :: zcpvap
[4523]	849	REAL, DIMENSION(nlon,nlev), INTENT(IN) :: temp, qv, ql, qs, qbs, uu, vv
[3927]	850	REAL, DIMENSION(nlon,nlev), INTENT(IN) :: zairm
	851	REAL, DIMENSION(nlon), INTENT(OUT) :: zqw_col
	852	REAL, DIMENSION(nlon), INTENT(OUT) :: zql_col
[4523]	853	REAL, DIMENSION(nlon), INTENT(OUT) :: zqs_col, zqbs_col
[3927]	854	REAL, DIMENSION(nlon), INTENT(OUT) :: zek_col
	855	REAL, DIMENSION(nlon), INTENT(OUT) :: zh_dair_col
	856	REAL, DIMENSION(nlon), INTENT(OUT) :: zh_qw_col
	857	REAL, DIMENSION(nlon), INTENT(OUT) :: zh_ql_col
[4523]	858	REAL, DIMENSION(nlon), INTENT(OUT) :: zh_qs_col, zh_qbs_col
[3927]	859	REAL, DIMENSION(nlon), INTENT(OUT) :: zh_col
	860
	861	INTEGER :: i, k
	862
	863
	864	! Reset variables
	865	zqw_col(:) = 0.
	866	zql_col(:) = 0.
	867	zqs_col(:) = 0.
[4523]	868	zqbs_col(:) = 0.
[3927]	869	zek_col(:) = 0.
	870	zh_dair_col(:) = 0.
	871	zh_qw_col(:) = 0.
	872	zh_ql_col(:) = 0.
	873	zh_qs_col(:) = 0.
[4523]	874	zh_qbs_col(:) = 0.
[3927]	875
	876	!JLD write (,) "rcpd, zcpvap, zcwat, zcice ",rcpd, zcpvap, zcwat, zcice
	877
	878	! ------------------------------------------------
	879	! Compute vertical sum for each atmospheric column
	880	! ------------------------------------------------
	881	DO k = 1, nlev
	882	DO i = 1, nlon
	883	! Watter mass
	884	zqw_col(i) = zqw_col(i) + qv(i, k)*zairm(i, k)
	885	zql_col(i) = zql_col(i) + ql(i, k)*zairm(i, k)
	886	zqs_col(i) = zqs_col(i) + qs(i, k)*zairm(i, k)
[4523]	887	zqbs_col(i)= zqbs_col(i) + qbs(i,k)*zairm(i,k)
[3927]	888	! Kinetic Energy
	889	zek_col(i) = zek_col(i) + 0.5(uu(i,k)2+vv(i,k)2)zairm(i, k)
	890	! Air enthalpy : dry air, water vapour, liquid, solid
	891	zh_dair_col(i) = zh_dair_col(i) + rcpd(1.-qv(i,k)-ql(i,k)-qs(i,k)) &
	892	zairm(i, k)*temp(i, k)
	893	zh_qw_col(i) = zh_qw_col(i) + zcpvaptemp(i, k) qv(i, k)*zairm(i, k) !jyg
	894	zh_ql_col(i) = zh_ql_col(i) + (zcpvaptemp(i, k) - rlvtt)ql(i, k)*zairm(i, k) !jyg
	895	zh_qs_col(i) = zh_qs_col(i) + (zcpvaptemp(i, k) - rlstt)qs(i, k)*zairm(i, k) !jyg
[4523]	896	zh_qbs_col(i) = zh_qbs_col(i) + (zcpvaptemp(i, k) - rlstt)qbs(i, k)*zairm(i, k) !jyg
[3927]	897	END DO
	898	END DO
	899	! compute total air enthalpy
[4523]	900	zh_col(:) = zh_dair_col(:) + zh_qw_col(:) + zh_ql_col(:) + zh_qs_col(:) + zh_qbs_col(:)
[3927]	901
	902	END SUBROUTINE integr_v
	903
	904	SUBROUTINE prt_enerbil (text, itap)
	905	!======================================================================
	906	! Print enenrgy budget diagnotics for the 1D case
	907	!======================================================================
	908
	909	!======================================================================
	910	! Declarations
	911	!======================================================================
	912
	913	USE dimphy, ONLY: klon, klev
	914	USE phys_state_var_mod, ONLY : phys_tstep
[4523]	915	USE phys_state_var_mod, ONLY : topsw, toplw, solsw, sollw, rain_con, snow_con, bs_fall
[3927]	916	USE geometry_mod, ONLY: longitude_deg, latitude_deg
	917	USE print_control_mod, ONLY: prt_level
	918	USE cmp_seri_mod
[4523]	919	USE phys_output_var_mod, ONLY : d_qw_col, d_ql_col, d_qs_col, d_qbs_col, d_qt_col, d_ek_col, d_h_dair_col &
	920	& , d_h_qw_col, d_h_ql_col, d_h_qs_col, d_h_qbs_col, d_h_col
[3927]	921	USE phys_local_var_mod, ONLY: evap, sens
[4523]	922	USE phys_local_var_mod, ONLY: u_seri, v_seri, ql_seri, qs_seri, qbs_seri, q_seri, t_seri &
[3927]	923	& , rain_lsc, snow_lsc
	924	USE climb_hq_mod, ONLY : d_h_col_vdf, f_h_bnd
	925	IMPLICIT none
	926	include "YOMCST.h"
	927
	928	! Arguments :
	929	!------------
	930	CHARACTER() text ! text specifing the involved parametrization
	931	integer itap ! time step number
	932	! local variables
	933	! ---------------
	934	real bilq_seuil, bilh_seuil ! thresold on error in Q and H budget
	935	real bilq_error, bilh_error ! erros in Q and H budget
	936	real bilq_bnd, bilh_bnd ! Q and H budget due to exchange with boundaries
	937	integer bilq_ok, bilh_ok
	938	CHARACTER*(12) status
	939
	940	bilq_seuil = 1.E-10
	941	bilh_seuil = 1.E-1
	942	bilq_ok=0
	943	bilh_ok=0
	944
	945	!!print *,'prt_level:',prt_level,' fl_ebil:',fl_ebil,' fl_cor_ebil:',fl_cor_ebil
	946	if ( (fl_ebil .GT. 0) .and. (klon .EQ. 1)) then
	947
	948	bilq_bnd = 0.
	949	bilh_bnd = 0.
	950
	951	param: SELECT CASE (text)
	952	CASE("vdf") param
	953	bilq_bnd = evap(1)
	954	bilh_bnd = sens(1)+(rcpv-rcpd)evap(1)t_seri(1,1)
	955	CASE("lsc") param
	956	bilq_bnd = - rain_lsc(1) - snow_lsc(1)
	957	bilh_bnd = (-(rcw-rcpd)t_seri(1,1) + rlvtt) rain_lsc(1) &
	958	& + (-(rcs-rcpd)t_seri(1,1) + rlstt) snow_lsc(1)
[5051]	959	CASE("bsss") param
[4523]	960	bilq_bnd = - bs_fall(1)
	961	bilh_bnd = (-(rcs-rcpd)t_seri(1,1) + rlstt) bs_fall(1)
[3927]	962	CASE("convection") param
	963	bilq_bnd = - rain_con(1) - snow_con(1)
	964	bilh_bnd = (-(rcw-rcpd)t_seri(1,1) + rlvtt) rain_con(1) &
	965	& + (-(rcs-rcpd)t_seri(1,1) + rlstt) snow_con(1)
	966	CASE("SW") param
	967	bilh_bnd = topsw(1) - solsw(1)
	968	CASE("LW") param
	969	bilh_bnd = -(toplw(1) + sollw(1))
	970	CASE DEFAULT param
	971	bilq_bnd = 0.
	972	bilh_bnd = 0.
	973	END SELECT param
	974
	975	bilq_error = d_qt_col(1) - bilq_bnd
	976	bilh_error = d_h_col(1) - bilh_bnd
	977	! are the errors too large?
	978	if ( abs(bilq_error) .gt. bilq_seuil) bilq_ok=1
	979	if ( abs(bilh_error) .gt. bilh_seuil) bilh_ok=1
	980	!
	981	! Print diagnostics
	982	! =================
	983	if ( (bilq_ok .eq. 0).and.(bilh_ok .eq. 0) ) then
	984	status="enerbil-OK"
	985	else
	986	status="enerbil-PB"
	987	end if
	988
	989	if ( prt_level .GE. 3) then
	990	write(*,9010) text,status," itap:",itap,"enerbilERROR: Q", bilq_error," H", bilh_error
	991	9010 format (1x,A8,2x,A12,A6,I4,A18,E15.6,A5,E15.6)
	992	end if
	993	if ( prt_level .GE. 3) then
	994	write(*,9000) text,"enerbil: Q,H,KE budget", d_qt_col(1), d_h_col(1),d_ek_col(1)
	995	end if
	996	if ( prt_level .GE. 5) then
	997	write(*,9000) text,"enerbil at boundaries: Q, H",bilq_bnd, bilh_bnd
[4523]	998	write(*,9000) text,"enerbil: water budget",d_qt_col(1),d_qw_col(1),d_ql_col(1),d_qs_col(1), d_qbs_col(1)
	999	write(*,9000) text,"enerbil: enthalpy budget",d_h_col(1),d_h_dair_col(1),d_h_qw_col(1),d_h_ql_col(1),d_h_qs_col(1),d_h_qbs_col(1)
[3927]	1000	end if
	1001
	1002	specific_diag: SELECT CASE (text)
	1003	CASE("vdf") specific_diag
	1004	if ( prt_level .GE. 5) then
	1005	write(*,9000) text,"enerbil: d_h, bilh, sens,t_seri", d_h_col(1), bilh_bnd, sens(1), t_seri(1,1)
	1006	write(*,9000) text,"enerbil: d_h_col_vdf, f_h, diff",d_h_col_vdf, f_h_bnd, bilh_bnd-sens(1)
	1007	end if
	1008	CASE("lsc") specific_diag
	1009	if ( prt_level .GE. 5) then
	1010	write(,9000) text,"enerbil: rain, bil_lat, bil_sens", rain_lsc(1), rlvtt rain_lsc(1), -(rcw-rcpd)t_seri(1,1) rain_lsc(1)
	1011	write(,9000) text,"enerbil: snow, bil_lat, bil_sens", snow_lsc(1), rlstt snow_lsc(1), -(rcs-rcpd)t_seri(1,1) snow_lsc(1)
	1012	end if
	1013	CASE("convection") specific_diag
	1014	if ( prt_level .GE. 5) then
	1015	write(,9000) text,"enerbil: rain, bil_lat, bil_sens", rain_con(1), rlvtt rain_con(1), -(rcw-rcpd)t_seri(1,1) rain_con(1)
	1016	write(,9000) text,"enerbil: snow, bil_lat, bil_sens", snow_con(1), rlstt snow_con(1), -(rcs-rcpd)t_seri(1,1) snow_con(1)
	1017	end if
	1018	END SELECT specific_diag
	1019
	1020	9000 format (1x,A8,2x,A35,10E15.6)
	1021
	1022	end if ! end if (fl_ebil .GT. 0)
	1023
	1024	END SUBROUTINE prt_enerbil
	1025
	1026	END MODULE add_phys_tend_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format