Context Navigation

traclmdz_mod.F90 @ 4296

Last change on this file since 4296 was 4124, checked in by dcugnet, 3 years ago
Remove solsym, ok_isotopes (=niso>0), ok_isotrac (=nzone>0)
Property copyright set to Name of program: LMDZ Creation date: 1984 Version: LMDZ5 License: CeCILL version 2 Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539 See the license file in the root directory
File size: 22.1 KB

Rev	Line
[1191]	1	!$Id $
	2	!
	3	MODULE traclmdz_mod
[1742]	4
[1191]	5	!
	6	! In this module all tracers specific to LMDZ are treated. This module is used
	7	! only if running without any other chemestry model as INCA or REPROBUS.
	8	!
[1403]	9	IMPLICIT NONE
	10
[1191]	11	REAL,DIMENSION(:,:),ALLOCATABLE,SAVE :: masktr ! Masque reservoir de sol traceur
	12	!$OMP THREADPRIVATE(masktr) ! Masque de l'echange avec la surface (1 = reservoir) ou (possible >= 1 )
	13	REAL,DIMENSION(:,:),ALLOCATABLE,SAVE :: fshtr ! Flux surfacique dans le reservoir de sol
	14	!$OMP THREADPRIVATE(fshtr)
	15	REAL,DIMENSION(:),ALLOCATABLE,SAVE :: hsoltr ! Epaisseur equivalente du reservoir de sol
	16	!$OMP THREADPRIVATE(hsoltr)
	17	!
	18	!Radioelements:
	19	!--------------
	20	!
	21	REAL,DIMENSION(:),ALLOCATABLE,SAVE :: tautr ! Constante de decroissance radioactive
	22	!$OMP THREADPRIVATE(tautr)
	23	REAL,DIMENSION(:),ALLOCATABLE,SAVE :: vdeptr ! Vitesse de depot sec dans la couche Brownienne
	24	!$OMP THREADPRIVATE(vdeptr)
	25	REAL,DIMENSION(:),ALLOCATABLE,SAVE :: scavtr ! Coefficient de lessivage
	26	!$OMP THREADPRIVATE(scavtr)
	27	REAL,DIMENSION(:,:),ALLOCATABLE,SAVE :: srcbe ! Production du beryllium7 dans l atmosphere (U/s/kgA)
	28	!$OMP THREADPRIVATE(srcbe)
	29
	30	LOGICAL,DIMENSION(:),ALLOCATABLE,SAVE :: radio ! radio(it) = true => decroisssance radioactive
	31	!$OMP THREADPRIVATE(radio)
	32
	33	REAL,DIMENSION(:,:),ALLOCATABLE,SAVE :: trs ! Conc. radon ds le sol
	34	!$OMP THREADPRIVATE(trs)
	35
[1409]	36	INTEGER,SAVE :: id_aga ! Identification number for tracer : Age of stratospheric air
	37	!$OMP THREADPRIVATE(id_aga)
	38	INTEGER,SAVE :: lev_1p5km ! Approximative vertical layer number at 1.5km above surface, used for calculation of the age of air. The result shouldn't be that sensible to the exactness of this value as long as it is in the lower troposphere.
	39	!$OMP THREADPRIVATE(lev_1p5km)
	40
	41	INTEGER,SAVE :: id_rn, id_pb ! Identification number for tracer : radon (Rn222), lead (Pb210)
	42	!$OMP THREADPRIVATE(id_rn, id_pb)
	43
[1191]	44	INTEGER,SAVE :: id_be ! Activation et position du traceur Be7 [ id_be=0 -> desactive ]
	45	!$OMP THREADPRIVATE(id_be)
	46
[1403]	47	INTEGER,SAVE :: id_pcsat, id_pcocsat, id_pcq ! traceurs pseudo-vapeur CL qsat, qsat_oc, q
	48	!$OMP THREADPRIVATE(id_pcsat, id_pcocsat, id_pcq)
[1421]	49	INTEGER,SAVE :: id_pcs0, id_pcos0, id_pcq0 ! traceurs pseudo-vapeur CL qsat, qsat_oc, q
	50	! ! qui ne sont pas transportes par la convection
[1403]	51	!$OMP THREADPRIVATE(id_pcs0, id_pcos0, id_pcq0)
	52
	53	INTEGER, SAVE:: id_o3
[1421]	54	!$OMP THREADPRIVATE(id_o3)
	55	! index of ozone tracer with Cariolle parameterization
	56	! 0 means no ozone tracer
[1403]	57
[1409]	58	LOGICAL,SAVE :: rnpb=.FALSE. ! Presence du couple Rn222, Pb210
[1191]	59	!$OMP THREADPRIVATE(rnpb)
	60
	61
	62	CONTAINS
	63
	64	SUBROUTINE traclmdz_from_restart(trs_in)
	65	! This subroutine initialize the module saved variable trs with values from restart file (startphy.nc).
	66	! This subroutine is called from phyetat0 after the field trs_in has been read.
	67
	68	USE dimphy
[4056]	69	USE infotrac_phy, ONLY: nbtr
[1191]	70
	71	! Input argument
	72	REAL,DIMENSION(klon,nbtr), INTENT(IN) :: trs_in
	73
	74	! Local variables
	75	INTEGER :: ierr
	76
	77	! Allocate restart variables trs
	78	ALLOCATE( trs(klon,nbtr), stat=ierr)
[2311]	79	IF (ierr /= 0) CALL abort_physic('traclmdz_from_restart', 'pb in allocation 1',1)
[1191]	80
	81	! Initialize trs with values read from restart file
	82	trs(:,:) = trs_in(:,:)
	83
	84	END SUBROUTINE traclmdz_from_restart
	85
	86
[1579]	87	SUBROUTINE traclmdz_init(pctsrf, xlat, xlon, ftsol, tr_seri, t_seri, pplay, sh, pdtphys, aerosol, lessivage)
[1191]	88	! This subroutine allocates and initialize module variables and control variables.
[1421]	89	! Initialization of the tracers should be done here only for those not found in the restart file.
[1191]	90	USE dimphy
[4056]	91	USE infotrac_phy, ONLY: nbtr, nqtot, tracers, pbl_flg, conv_flg
[1403]	92	USE regr_pr_comb_coefoz_m, ONLY: alloc_coefoz
	93	USE press_coefoz_m, ONLY: press_coefoz
[1421]	94	USE mod_grid_phy_lmdz
	95	USE mod_phys_lmdz_para
[1785]	96	USE indice_sol_mod
[2311]	97	USE print_control_mod, ONLY: lunout
[4046]	98	USE strings_mod, ONLY: strLower
[1191]	99
	100	! Input variables
[1227]	101	REAL,DIMENSION(klon,nbsrf),INTENT(IN) :: pctsrf ! Pourcentage de sol f(nature du sol)
[1579]	102	REAL,DIMENSION(klon),INTENT(IN) :: xlat ! latitudes en degres pour chaque point
	103	REAL,DIMENSION(klon),INTENT(IN) :: xlon ! longitudes en degres pour chaque point
[1227]	104	REAL,DIMENSION(klon,nbsrf),INTENT(IN) :: ftsol ! Temperature du sol (surf)(Kelvin)
[1403]	105	REAL,DIMENSION(klon,klev,nbtr),INTENT(INOUT) :: tr_seri! Concentration Traceur [U/KgA]
	106	REAL,DIMENSION(klon,klev),INTENT(IN) :: t_seri ! Temperature
	107	REAL,DIMENSION(klon,klev),INTENT(IN) :: pplay ! pression pour le mileu de chaque couche (en Pa)
	108	REAL,DIMENSION(klon,klev),INTENT(IN) :: sh ! humidite specifique
[1454]	109	REAL,INTENT(IN) :: pdtphys ! Pas d'integration pour la physique (seconde)
[1227]	110
[1191]	111	! Output variables
	112	LOGICAL,DIMENSION(nbtr), INTENT(OUT) :: aerosol
	113	LOGICAL,INTENT(OUT) :: lessivage
	114
	115	! Local variables
[4056]	116	INTEGER :: ierr, it, iq, i, k
[1421]	117	REAL, DIMENSION(klon_glo,klev) :: varglo ! variable temporaire sur la grille global
	118	REAL, DIMENSION(klev) :: mintmp, maxtmp
	119	LOGICAL :: zero
[1742]	120	! RomP >>> profil initial Be7
	121	integer ilesfil
	122	parameter (ilesfil=1)
	123	integer irr,kradio
	124	real beryllium(klon,klev)
	125	! profil initial Pb210
	126	integer ilesfil2
	127	parameter (ilesfil2=1)
	128	integer irr2,kradio2
	129	real plomb(klon,klev)
	130	!! RomP <<<
[1191]	131	! --------------------------------------------
	132	! Allocation
	133	! --------------------------------------------
	134	ALLOCATE( scavtr(nbtr), stat=ierr)
[2311]	135	IF (ierr /= 0) CALL abort_physic('traclmdz_init', 'pb in allocation 9',1)
[1191]	136	scavtr(:)=1.
	137
	138	ALLOCATE( radio(nbtr), stat=ierr)
[2311]	139	IF (ierr /= 0) CALL abort_physic('traclmdz_init', 'pb in allocation 11',1)
[1191]	140	radio(:) = .false. ! Par defaut pas decroissance radioactive
	141
	142	ALLOCATE( masktr(klon,nbtr), stat=ierr)
[2311]	143	IF (ierr /= 0) CALL abort_physic('traclmdz_init', 'pb in allocation 2',1)
[1191]	144
	145	ALLOCATE( fshtr(klon,nbtr), stat=ierr)
[2311]	146	IF (ierr /= 0) CALL abort_physic('traclmdz_init', 'pb in allocation 3',1)
[1191]	147
	148	ALLOCATE( hsoltr(nbtr), stat=ierr)
[2311]	149	IF (ierr /= 0) CALL abort_physic('traclmdz_init', 'pb in allocation 4',1)
[1191]	150
	151	ALLOCATE( tautr(nbtr), stat=ierr)
[2311]	152	IF (ierr /= 0) CALL abort_physic('traclmdz_init', 'pb in allocation 5',1)
[1191]	153	tautr(:) = 0.
	154
	155	ALLOCATE( vdeptr(nbtr), stat=ierr)
[2311]	156	IF (ierr /= 0) CALL abort_physic('traclmdz_init', 'pb in allocation 6',1)
[1191]	157	vdeptr(:) = 0.
	158
	159
	160	lessivage = .TRUE.
[1742]	161	!!jyg(20130206) : le choix d activation du lessivage est fait dans phytrac avec iflag_lscav
	162	!! call getin('lessivage',lessivage)
	163	!! if(lessivage) then
	164	!! print*,'lessivage lsc ON'
	165	!! else
	166	!! print*,'lessivage lsc OFF'
	167	!! endif
[1191]	168	aerosol(:) = .FALSE. ! Tous les traceurs sont des gaz par defaut
	169
	170	!
[1403]	171	! Recherche des traceurs connus : Be7, O3, CO2,...
[1191]	172	! --------------------------------------------
[1409]	173	id_rn=0; id_pb=0; id_aga=0; id_be=0; id_o3=0
[1421]	174	id_pcsat=0; id_pcocsat=0; id_pcq=0; id_pcs0=0; id_pcos0=0; id_pcq0=0
[4056]	175	it = 0
	176	DO iq = 1, nqtot
[4071]	177	IF(.NOT.(tracers(iq)%isAdvected .AND. tracers(iq)%isInPhysics)) CYCLE
[4056]	178	it = it+1
	179	SELECT CASE(strLower(tracers(iq)%name))
[4046]	180	CASE("rn"); id_rn = it ! radon
	181	CASE("pb"); id_pb = it ! plomb
	182	CASE("aga"); id_aga = it ! Age of stratospheric air
	183	CASE("be","be7");id_be = it ! Recherche du Beryllium 7
	184	CASE("o3"); id_o3 = it ! Recherche de l'ozone
	185	CASE("pcsat"); id_pcsat = it
	186	CASE("pcocsat"); id_pcocsat= it
	187	CASE("pcq"); id_pcq = it
	188	CASE("pcs0"); id_pcs0 = it
	189	CASE("pcos0"); id_pcos0 = it
	190	CASE("pcq0"); id_pcq0 = it
	191	CASE DEFAULT
[4056]	192	WRITE(lunout,*) 'This is an unknown tracer in LMDZ : ', trim(tracers(iq)%name)
[4046]	193	END SELECT
	194
[4056]	195	SELECT CASE(strLower(tracers(iq)%name))
[4046]	196	CASE("pb") !--- RomP >>> profil initial de PB210
	197	OPEN(ilesfil2,file='prof.pb210',status='old',iostat=irr2)
	198	IF(irr2 == 0) THEN
	199	READ(ilesfil2,*) kradio2
	200	WRITE(lunout,*)'number of levels for pb210 profile ',kradio2
	201	DO k=kradio2,1,-1; READ (ilesfil2,*) plomb(:,k); END DO
	202	CLOSE(ilesfil2)
	203	tr_seri(:,:,id_pb) = plomb(:,:)
	204	ELSE
	205	WRITE(lunout,*)'Prof. Pb210 does not exist: use restart values'
	206	END IF
	207	CASE("aga")
	208	radio(id_aga) = .FALSE.
	209	aerosol(id_aga) = .FALSE.
	210	pbl_flg(id_aga) = 0
	211	! Find the first model layer above 1.5km from the surface
	212	IF (klev>=30) THEN
	213	lev_1p5km=6 !--- NB: This value is for klev=39
	214	ELSE IF (klev>=10) THEN
	215	lev_1p5km=5 !--- NB: This value is for klev=19
	216	ELSE
	217	lev_1p5km=klev/2
	218	END IF
	219	CASE("be","be7")
	220	ALLOCATE( srcbe(klon,klev) )
	221	radio(id_be) = .TRUE.
	222	aerosol(id_be) = .TRUE. !--- Le Be est un aerosol
	223	CALL init_be(pctsrf,pplay,masktr(:,id_be),tautr(id_be),vdeptr(id_be),scavtr(id_be),srcbe)
	224	WRITE(lunout,*) 'Initialisation srcBe: OK'
	225	!--- RomP >>> profil initial de Be7
	226	OPEN(ilesfil,file='prof.be7',status='old',iostat=irr)
	227	IF(irr == 0) THEN
	228	READ(ilesfil,*) kradio
	229	WRITE(lunout,*)'number of levels for Be7 profile ',kradio
	230	DO k=kradio,1,-1; READ(ilesfil,*) beryllium(:,k); END DO
	231	CLOSE(ilesfil)
	232	tr_seri(:,:,id_be)=beryllium(:,:)
	233	ELSE
	234	WRITE(lunout,*)'Prof. Be7 does not exist: use restart values'
	235	END IF
	236	CASE("o3") !--- Parametrisation par la chimie de Cariolle
	237	CALL alloc_coefoz !--- Allocate ozone coefficients
	238	CALL press_coefoz !--- Read input pressure levels
	239	CASE("pcs0","pcos0","pcq0")
	240	conv_flg(it)=0 !--- No transport by convection for this tracer
	241	END SELECT
[1403]	242	END DO
	243
[1191]	244	!
	245	! Valeurs specifiques pour les traceurs Rn222 et Pb210
	246	! ----------------------------------------------
[1409]	247	IF ( id_rn/=0 .AND. id_pb/=0 ) THEN
	248	rnpb = .TRUE.
	249	radio(id_rn)= .TRUE.
	250	radio(id_pb)= .TRUE.
	251	pbl_flg(id_rn) = 0 ! au lieu de clsol=true ! CL au sol calcule
	252	pbl_flg(id_pb) = 0 ! au lieu de clsol=true
	253	aerosol(id_rn) = .FALSE.
	254	aerosol(id_pb) = .TRUE. ! le Pb est un aerosol
[1191]	255
	256	CALL initrrnpb (ftsol,pctsrf,masktr,fshtr,hsoltr,tautr,vdeptr,scavtr)
	257	END IF
	258
[1227]	259	!
[1421]	260	! Check if all tracers have restart values
	261	! ----------------------------------------------
[4056]	262	it = 0
	263	DO iq = 1, nqtot
[4071]	264	IF(.NOT.(tracers(iq)%isAdvected .AND. tracers(iq)%isInPhysics)) CYCLE
[4056]	265	it = it+1
[1421]	266	! Test if tracer is zero everywhere.
	267	! Done by master process MPI and master thread OpenMP
	268	CALL gather(tr_seri(:,:,it),varglo)
	269	IF (is_mpi_root .AND. is_omp_root) THEN
	270	mintmp=MINVAL(varglo,dim=1)
	271	maxtmp=MAXVAL(varglo,dim=1)
	272	IF (MINVAL(mintmp,dim=1)==0. .AND. MAXVAL(maxtmp,dim=1)==0.) THEN
	273	! Tracer is zero everywhere
	274	zero=.TRUE.
	275	ELSE
	276	zero=.FALSE.
	277	END IF
[1403]	278	END IF
	279
[1421]	280	! Distribute variable at all processes
	281	CALL bcast(zero)
[1403]	282
[1421]	283	! Initalize tracer that was not found in restart file.
	284	IF (zero) THEN
	285	! The tracer was not found in restart file or it was equal zero everywhere.
[4056]	286	WRITE(lunout,*) "The tracer ",trim(tracers(iq)%name)," will be initialized"
[1421]	287	IF (it==id_pcsat .OR. it==id_pcq .OR. &
	288	it==id_pcs0 .OR. it==id_pcq0) THEN
	289	tr_seri(:,:,it) = 100.
	290	ELSE IF (it==id_pcocsat .OR. it==id_pcos0) THEN
	291	DO i = 1, klon
	292	IF ( pctsrf (i, is_oce) == 0. ) THEN
	293	tr_seri(i,:,it) = 0.
	294	ELSE
	295	tr_seri(i,:,it) = 100.
	296	END IF
	297	END DO
	298	ELSE
	299	! No specific initialization exist for this tracer
	300	tr_seri(:,:,it) = 0.
	301	END IF
[1403]	302	END IF
[1421]	303	END DO
[1403]	304
[1191]	305	END SUBROUTINE traclmdz_init
	306
[1403]	307	SUBROUTINE traclmdz(nstep, julien, gmtime, pdtphys, t_seri, paprs, pplay, &
	308	cdragh, coefh, yu1, yv1, ftsol, pctsrf, xlat, xlon, couchelimite, sh, &
[1813]	309	rh, pphi, ustar, wstar, ale_bl, ale_wake, zu10m, zv10m, &
[2180]	310	tr_seri, source, d_tr_cl,d_tr_dec, zmasse) !RomP
[1191]	311
	312	USE dimphy
[4124]	313	USE infotrac_phy, ONLY: nbtr, pbl_flg
	314	USE strings_mod, ONLY: int2str
[1403]	315	USE regr_pr_comb_coefoz_m, ONLY: regr_pr_comb_coefoz
	316	USE o3_chem_m, ONLY: o3_chem
[1785]	317	USE indice_sol_mod
	318
[1191]	319	INCLUDE "YOMCST.h"
	320
	321	!==========================================================================
	322	! -- DESCRIPTION DES ARGUMENTS --
	323	!==========================================================================
	324
	325	! Input arguments
	326	!
	327	!Configuration grille,temps:
[1212]	328	INTEGER,INTENT(IN) :: nstep ! nombre d'appels de la physiq
[1403]	329	INTEGER,INTENT(IN) :: julien ! Jour julien
	330	REAL,INTENT(IN) :: gmtime
[1191]	331	REAL,INTENT(IN) :: pdtphys ! Pas d'integration pour la physique (seconde)
	332	REAL,DIMENSION(klon),INTENT(IN) :: xlat ! latitudes pour chaque point
[1403]	333	REAL, INTENT(IN):: xlon(:) ! dim(klon) longitude
[1191]	334
	335	!
	336	!Physique:
	337	!--------
	338	REAL,DIMENSION(klon,klev),INTENT(IN) :: t_seri ! Temperature
	339	REAL,DIMENSION(klon,klev+1),INTENT(IN) :: paprs ! pression pour chaque inter-couche (en Pa)
	340	REAL,DIMENSION(klon,klev),INTENT(IN) :: pplay ! pression pour le mileu de chaque couche (en Pa)
[1403]	341	REAL,intent(in):: zmasse (:, :) ! dim(klon,klev) density of air, in kg/m2
[1191]	342
	343
	344	!Couche limite:
	345	!--------------
	346	!
[1742]	347	REAL,DIMENSION(klon),INTENT(IN) :: cdragh ! coeff drag pour T et Q
	348	REAL,DIMENSION(klon,klev),INTENT(IN) :: coefh ! coeff melange CL (m**2/s)
	349	REAL,DIMENSION(klon),INTENT(IN) :: yu1 ! vents au premier niveau
	350	REAL,DIMENSION(klon),INTENT(IN) :: yv1 ! vents au premier niveau
[1191]	351	LOGICAL,INTENT(IN) :: couchelimite
[1742]	352	REAL,DIMENSION(klon,klev),INTENT(IN) :: sh ! humidite specifique
[1670]	353	REAL,DIMENSION(klon,klev),INTENT(IN) :: rh ! Humidite relative
	354	REAL,DIMENSION(klon,klev),INTENT(IN) :: pphi ! geopotentie
	355	REAL,DIMENSION(klon),INTENT(IN) :: ustar ! ustar (m/s)
[1813]	356	REAL,DIMENSION(klon),INTENT(IN) :: wstar,ale_bl,ale_wake ! wstar (m/s) and Avail. Lifti. Energ.
[1670]	357	REAL,DIMENSION(klon),INTENT(IN) :: zu10m ! vent zonal 10m (m/s)
	358	REAL,DIMENSION(klon),INTENT(IN) :: zv10m ! vent zonal 10m (m/s)
[1191]	359
	360	! Arguments necessaires pour les sources et puits de traceur:
	361	REAL,DIMENSION(klon,nbsrf),INTENT(IN) :: ftsol ! Temperature du sol (surf)(Kelvin)
	362	REAL,DIMENSION(klon,nbsrf),INTENT(IN) :: pctsrf ! Pourcentage de sol f(nature du sol)
	363
	364	! InOutput argument
	365	REAL,DIMENSION(klon,klev,nbtr),INTENT(INOUT) :: tr_seri ! Concentration Traceur [U/KgA]
	366
	367	! Output argument
	368	REAL,DIMENSION(klon,nbtr), INTENT(OUT) :: source ! a voir lorsque le flux de surface est prescrit
	369	REAL,DIMENSION(klon,klev,nbtr), INTENT(OUT) :: d_tr_cl ! Td couche limite/traceur
	370
	371	!=======================================================================================
	372	! -- VARIABLES LOCALES TRACEURS --
	373	!=======================================================================================
	374
	375	INTEGER :: i, k, it
[1421]	376	INTEGER :: lmt_pas ! number of time steps of "physics" per day
[1191]	377
	378	REAL,DIMENSION(klon) :: d_trs ! Td dans le reservoir
[1421]	379	REAL,DIMENSION(klon,klev) :: qsat ! pression de la vapeur a saturation
[1191]	380	REAL,DIMENSION(klon,klev,nbtr) :: d_tr_dec ! Td radioactive
[1421]	381	REAL :: zrho ! Masse Volumique de l'air KgA/m3
	382	REAL :: amn, amx
[1191]	383	!
	384	!=================================================================
	385	! Ajout de la production en Be7 (Beryllium) srcbe U/s/kgA
	386	!=================================================================
	387	!
	388	IF ( id_be /= 0 ) THEN
	389	DO k = 1, klev
	390	DO i = 1, klon
	391	tr_seri(i,k,id_be) = tr_seri(i,k,id_be)+srcbe(i,k)*pdtphys
	392	END DO
	393	END DO
	394	WRITE(,) 'Ajout srcBe dans tr_seri: OK'
	395	END IF
	396
[1421]	397
	398	!=================================================================
	399	! Update pseudo-vapor tracers
	400	!=================================================================
	401
	402	CALL q_sat(klon*klev,t_seri,pplay,qsat)
	403
[1403]	404	IF ( id_pcsat /= 0 ) THEN
	405	DO k = 1, klev
	406	DO i = 1, klon
[1421]	407	IF ( pplay(i,k).GE.85000.) THEN
	408	tr_seri(i,k,id_pcsat) = qsat(i,k)
	409	ELSE
	410	tr_seri(i,k,id_pcsat) = MIN (qsat(i,k), tr_seri(i,k,id_pcsat))
	411	END IF
[1403]	412	END DO
	413	END DO
	414	END IF
[1191]	415
[1403]	416	IF ( id_pcocsat /= 0 ) THEN
	417	DO k = 1, klev
	418	DO i = 1, klon
[1421]	419	IF ( pplay(i,k).GE.85000.) THEN
	420	IF ( pctsrf (i, is_oce) > 0. ) THEN
	421	tr_seri(i,k,id_pcocsat) = qsat(i,k)
	422	ELSE
	423	tr_seri(i,k,id_pcocsat) = 0.
	424	END IF
	425	ELSE
	426	tr_seri(i,k,id_pcocsat) = MIN (qsat(i,k), tr_seri(i,k,id_pcocsat))
[1403]	427	END IF
	428	END DO
	429	END DO
	430	END IF
	431
	432	IF ( id_pcq /= 0 ) THEN
	433	DO k = 1, klev
	434	DO i = 1, klon
[1421]	435	IF ( pplay(i,k).GE.85000.) THEN
	436	tr_seri(i,k,id_pcq) = sh(i,k)
	437	ELSE
	438	tr_seri(i,k,id_pcq) = MIN (qsat(i,k), tr_seri(i,k,id_pcq))
	439	END IF
[1403]	440	END DO
	441	END DO
	442	END IF
	443
[1421]	444
[1403]	445	IF ( id_pcs0 /= 0 ) THEN
	446	DO k = 1, klev
	447	DO i = 1, klon
[1421]	448	IF ( pplay(i,k).GE.85000.) THEN
	449	tr_seri(i,k,id_pcs0) = qsat(i,k)
	450	ELSE
	451	tr_seri(i,k,id_pcs0) = MIN (qsat(i,k), tr_seri(i,k,id_pcs0))
	452	END IF
[1403]	453	END DO
	454	END DO
	455	END IF
	456
[1421]	457
[1403]	458	IF ( id_pcos0 /= 0 ) THEN
	459	DO k = 1, klev
	460	DO i = 1, klon
[1421]	461	IF ( pplay(i,k).GE.85000.) THEN
	462	IF ( pctsrf (i, is_oce) > 0. ) THEN
	463	tr_seri(i,k,id_pcos0) = qsat(i,k)
	464	ELSE
	465	tr_seri(i,k,id_pcos0) = 0.
	466	END IF
	467	ELSE
	468	tr_seri(i,k,id_pcos0) = MIN (qsat(i,k), tr_seri(i,k,id_pcos0))
	469	END IF
[1403]	470	END DO
	471	END DO
	472	END IF
	473
[1421]	474
[1403]	475	IF ( id_pcq0 /= 0 ) THEN
	476	DO k = 1, klev
	477	DO i = 1, klon
[1421]	478	IF ( pplay(i,k).GE.85000.) THEN
	479	tr_seri(i,k,id_pcq0) = sh(i,k)
	480	ELSE
	481	tr_seri(i,k,id_pcq0) = MIN (qsat(i,k), tr_seri(i,k,id_pcq0))
	482	END IF
[1403]	483	END DO
	484	END DO
	485	END IF
	486
[1409]	487	!=================================================================
	488	! Update tracer : Age of stratospheric air
	489	!=================================================================
	490	IF (id_aga/=0) THEN
	491
	492	! Bottom layers
	493	DO k = 1, lev_1p5km
	494	tr_seri(:,k,id_aga) = 0.0
	495	END DO
	496
	497	! Layers above 1.5km
	498	DO k = lev_1p5km+1,klev-1
	499	tr_seri(:,k,id_aga) = tr_seri(:,k,id_aga) + pdtphys
	500	END DO
	501
	502	! Top layer
	503	tr_seri(:,klev,id_aga) = tr_seri(:,klev-1,id_aga)
	504
	505	END IF
	506
[1191]	507	!======================================================================
	508	! -- Calcul de l'effet de la couche limite --
	509	!======================================================================
	510
	511	IF (couchelimite) THEN
[1212]	512	source(:,:) = 0.0
	513
	514	IF (id_be /=0) THEN
	515	DO i=1, klon
	516	zrho = pplay(i,1)/t_seri(i,1)/RD
	517	source(i,id_be) = - vdeptr(id_be)tr_seri(i,1,id_be)zrho
	518	END DO
	519	END IF
	520
[1191]	521	END IF
	522
	523	DO it=1, nbtr
[1409]	524	IF (couchelimite .AND. pbl_flg(it) == 0 .AND. (it==id_rn .OR. it==id_pb)) THEN
	525	! couche limite avec quantite dans le sol calculee
[1191]	526	CALL cltracrn(it, pdtphys, yu1, yv1, &
	527	cdragh, coefh,t_seri,ftsol,pctsrf, &
	528	tr_seri(:,:,it),trs(:,it), &
[1403]	529	paprs, pplay, zmasse * rg, &
[1191]	530	masktr(:,it),fshtr(:,it),hsoltr(it),&
	531	tautr(it),vdeptr(it), &
	532	xlat,d_tr_cl(:,:,it),d_trs)
	533
	534	DO k = 1, klev
	535	DO i = 1, klon
	536	tr_seri(i,k,it) = tr_seri(i,k,it) + d_tr_cl(i,k,it)
	537	END DO
	538	END DO
	539
	540	! Traceur dans le reservoir sol
	541	DO i = 1, klon
	542	trs(i,it) = trs(i,it) + d_trs(i)
	543	END DO
	544	END IF
	545	END DO
[1403]	546
	547
[1191]	548	!======================================================================
	549	! Calcul de l'effet du puits radioactif
	550	!======================================================================
	551	CALL radio_decay (radio,rnpb,pdtphys,tautr,tr_seri,d_tr_dec)
[1421]	552
[1191]	553	DO it=1,nbtr
	554	IF(radio(it)) then
	555	DO k = 1, klev
	556	DO i = 1, klon
	557	tr_seri(i,k,it) = tr_seri(i,k,it) + d_tr_dec(i,k,it)
	558	END DO
	559	END DO
[4124]	560	CALL minmaxqfi(tr_seri(:,:,it),0.,1.e33,'puits rn it='//TRIM(int2str(it)))
[1191]	561	END IF
	562	END DO
	563
[1227]	564	!======================================================================
[1403]	565	! Parameterization of ozone chemistry
	566	!======================================================================
	567
	568	IF (id_o3 /= 0) then
	569	lmt_pas = NINT(86400./pdtphys)
	570	IF (MOD(nstep - 1, lmt_pas) == 0) THEN
	571	! Once per day, update the coefficients for ozone chemistry:
	572	CALL regr_pr_comb_coefoz(julien, xlat, paprs, pplay)
	573	END IF
	574	CALL o3_chem(julien, gmtime, t_seri, zmasse, pdtphys, xlat, &
	575	xlon, tr_seri(:, :, id_o3))
	576	END IF
	577
[1191]	578	END SUBROUTINE traclmdz
	579
	580
	581	SUBROUTINE traclmdz_to_restart(trs_out)
	582	! This subroutine is called from phyredem.F where the module
	583	! variable trs is written to restart file (restartphy.nc)
	584	USE dimphy
[4050]	585	USE infotrac_phy, ONLY: nbtr
[1191]	586
	587	REAL,DIMENSION(klon,nbtr), INTENT(OUT) :: trs_out
[1203]	588	INTEGER :: ierr
[1212]	589
	590	IF ( ALLOCATED(trs) ) THEN
	591	trs_out(:,:) = trs(:,:)
[1203]	592	ELSE
[1212]	593	! No previous allocate of trs. This is the case for create_etat0_limit.
	594	trs_out(:,:) = 0.0
[1203]	595	END IF
[1212]	596
[1191]	597	END SUBROUTINE traclmdz_to_restart
	598
	599
	600	END MODULE traclmdz_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format