Context Navigation

thermcell_main.F90 @ 4163

Last change on this file since 4163 was 4143, checked in by dcugnet, 3 years ago
Some variables are renamed or replaced by direct equivalents: iso_indnum -> tracers(:)%iso_iName niso_possibles -> niso iqiso -> iqIsoPha ; index_trac -> itZonIso ok_iso_verif -> isoCheck ntraceurs_zone -> nzone ; ntraciso -> ntiso qperemin -> min_qparent ; masseqmin -> min_qmass ; ratiomin -> min_ratio Some renamed variables are only aliased with the older name (using USE <module>, ONLY: <oldName> => <newName>) in routines where they are repeated many times. Few hard-coded indexes are now computed (examples: ilic, iso, ivap, irneb, iq_vap, iq_liq, iso_H2O, iso_HDO, iso_HTO, iso_O17, iso_O18). The IF(isoCheck) test is now embedded in the check_isotopes_seq and check_isotopes_loc routines (lighter calling).
Property copyright set to Name of program: LMDZ Creation date: 1984 Version: LMDZ5 License: CeCILL version 2 Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539 See the license file in the root directory Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 29.3 KB

Rev	Line
[4089]	1
[1403]	2	! $Id: thermcell_main.F90 4143 2022-05-09 10:35:40Z asima $
[878]	3	!
[4089]	4	subroutine thermcell_main(itap,ngrid,nlay,ptimestep &
[878]	5	& ,pplay,pplev,pphi,debut &
	6	& ,pu,pv,pt,po &
	7	& ,pduadj,pdvadj,pdtadj,pdoadj &
[1026]	8	& ,fm0,entr0,detr0,zqta,zqla,lmax &
[878]	9	& ,ratqscth,ratqsdiff,zqsatth &
[1403]	10	& ,zmax0, f0,zw2,fraca,ztv &
[4089]	11	& ,zpspsk,ztla,zthl,ztva &
	12	& ,pcon,rhobarz,wth3,wmax_sec,lalim,fm,alim_star,zmax &
	13	#ifdef ISO
	14	& ,xtpo,xtpdoadj &
	15	#endif
	16	& )
[878]	17
[4089]	18
	19	USE thermcell_ini_mod, ONLY: thermcell_ini,dqimpl,dvdq,prt_level,lunout,prt_level
	20	USE thermcell_ini_mod, ONLY: iflag_thermals_closure,iflag_thermals_ed,tau_thermals,r_aspect_thermals
	21	USE thermcell_ini_mod, ONLY: RD,RG
	22
	23	#ifdef ISO
[4143]	24	USE infotrac_phy, ONLY : ntiso
[4089]	25	#ifdef ISOVERIF
	26	USE isotopes_mod, ONLY : iso_eau,iso_HDO
	27	USE isotopes_verif_mod, ONLY: iso_verif_egalite, &
	28	iso_verif_aberrant_encadre
	29	#endif
	30	#endif
	31
	32
[878]	33	IMPLICIT NONE
	34
	35	!=======================================================================
	36	! Auteurs: Frederic Hourdin, Catherine Rio, Anne Mathieu
	37	! Version du 09.02.07
	38	! Calcul du transport vertical dans la couche limite en presence
	39	! de "thermiques" explicitement representes avec processus nuageux
	40	!
[1403]	41	! Reecriture a partir d'un listing papier a Habas, le 14/02/00
[878]	42	!
[1403]	43	! le thermique est suppose homogene et dissipe par melange avec
	44	! son environnement. la longueur l_mix controle l'efficacite du
	45	! melange
[878]	46	!
[1403]	47	! Le calcul du transport des differentes especes se fait en prenant
[878]	48	! en compte:
	49	! 1. un flux de masse montant
	50	! 2. un flux de masse descendant
	51	! 3. un entrainement
	52	! 4. un detrainement
	53	!
[1738]	54	! Modif 2013/01/04 (FH hourdin@lmd.jussieu.fr)
	55	! Introduction of an implicit computation of vertical advection in
	56	! the environment of thermal plumes in thermcell_dq
	57	! impl = 0 : explicit, 1 : implicit, -1 : old version
	58	! controled by iflag_thermals =
	59	! 15, 16 run with impl=-1 : numerical convergence with NPv3
	60	! 17, 18 run with impl=1 : more stable
	61	! 15 and 17 correspond to the activation of the stratocumulus "bidouille"
	62	!
[4133]	63	! Using
	64	! abort_physic
	65	! iso_verif_aberrant_encadre
	66	! iso_verif_egalite
	67	! test_ltherm
	68	! thermcell_closure
	69	! thermcell_dq
	70	! thermcell_dry
	71	! thermcell_dv2
	72	! thermcell_env
	73	! thermcell_flux2
	74	! thermcell_height
	75	! thermcell_plume
	76	! thermcell_plume_5B
	77	! thermcell_plume_6A
	78	!
[878]	79	!=======================================================================
	80
[1738]	81
[878]	82	!-----------------------------------------------------------------------
	83	! declarations:
	84	! -------------
	85
	86
	87	! arguments:
	88	! ----------
[4089]	89	integer, intent(in) :: itap,ngrid,nlay
	90	real, intent(in) :: ptimestep
	91	real, intent(in), dimension(ngrid,nlay) :: pt,pu,pv,po,pplay,pphi,zpspsk
	92	real, intent(in), dimension(ngrid,nlay+1) :: pplev
[4133]	93	integer, intent(out), dimension(ngrid) :: lmax
[4089]	94	real, intent(out), dimension(ngrid,nlay) :: pdtadj,pduadj,pdvadj,pdoadj,entr0,detr0
	95	real, intent(out), dimension(ngrid,nlay) :: ztla,zqla,zqta,zqsatth,zthl
	96	real, intent(out), dimension(ngrid,nlay+1) :: fm0,zw2,fraca
[4133]	97	real, intent(inout), dimension(ngrid) :: zmax0,f0
[4089]	98	real, intent(out), dimension(ngrid,nlay) :: ztva,ztv
	99	logical, intent(in) :: debut
[4133]	100	real,intent(out), dimension(ngrid,nlay) :: ratqscth,ratqsdiff
[878]	101
[4089]	102	real, intent(out), dimension(ngrid) :: pcon
	103	real, intent(out), dimension(ngrid,nlay) :: rhobarz,wth3
	104	real, intent(out), dimension(ngrid) :: wmax_sec
	105	integer,intent(out), dimension(ngrid) :: lalim
	106	real, intent(out), dimension(ngrid,nlay+1) :: fm
	107	real, intent(out), dimension(ngrid,nlay) :: alim_star
	108	real, intent(out), dimension(ngrid) :: zmax
[972]	109
[878]	110	! local:
	111	! ------
	112
[1738]	113
[883]	114	integer,save :: igout=1
[987]	115	!$OMP THREADPRIVATE(igout)
[938]	116	integer,save :: lunout1=6
[987]	117	!$OMP THREADPRIVATE(lunout1)
[883]	118	integer,save :: lev_out=10
[987]	119	!$OMP THREADPRIVATE(lev_out)
[878]	120
[4089]	121	real lambda, zf,zf2,var,vardiff,CHI
	122	integer ig,k,l,ierr,ll
[878]	123	logical sorties
[4089]	124	real, dimension(ngrid) :: linter,zmix, zmax_sec
[4133]	125	integer,dimension(ngrid) :: lmin,lmix,lmix_bis,nivcon
[4089]	126	real, dimension(ngrid,nlay) :: ztva_est
	127	real, dimension(ngrid,nlay) :: deltaz,zlay,zh,zdthladj,zu,zv,zo,zl,zva,zua,zoa
	128	real, dimension(ngrid,nlay) :: zta,zha,q2,wq,wthl,wthv,thetath2,wth2
[4133]	129	real, dimension(ngrid,nlay) :: rho,masse
[4089]	130	real, dimension(ngrid,nlay+1) :: zw_est,zlev
	131	real, dimension(ngrid) :: wmax,wmax_tmp
	132	real, dimension(ngrid,nlay+1) :: f_star
	133	real, dimension(ngrid,nlay) :: entr,detr,entr_star,detr_star,alim_star_clos
	134	real, dimension(ngrid,nlay) :: zqsat,csc
	135	real, dimension(ngrid) :: zcon,zcon2,alim_star_tot,f
[878]	136
[4089]	137	character (len=20) :: modname='thermcell_main'
	138	character (len=80) :: abort_message
[878]	139
	140
[4089]	141	#ifdef ISO
[4143]	142	REAL xtpo(ntiso,ngrid,nlay),xtpdoadj(ntiso,ngrid,nlay)
	143	REAL xtzo(ntiso,ngrid,nlay)
[4089]	144	REAL xtpdoadj_tmp(ngrid,nlay)
	145	REAL xtpo_tmp(ngrid,nlay)
	146	REAL xtzo_tmp(ngrid,nlay)
	147	integer ixt
	148	#endif
[878]	149
	150	!
	151
	152	!-----------------------------------------------------------------------
	153	! initialisation:
	154	! ---------------
	155	!
[1943]	156	fm=0. ; entr=0. ; detr=0.
[972]	157
[938]	158	if (prt_level.ge.1) print*,'thermcell_main V4'
[878]	159
	160	sorties=.true.
[4089]	161	IF(ngrid.NE.ngrid) THEN
[878]	162	PRINT*
	163	PRINT*,'STOP dans convadj'
	164	PRINT*,'ngrid =',ngrid
[4089]	165	PRINT*,'ngrid =',ngrid
[878]	166	ENDIF
	167	!
[1403]	168	! write(lunout,*)'WARNING thermcell_main f0=max(f0,1.e-2)'
[4089]	169	do ig=1,ngrid
[972]	170	f0(ig)=max(f0(ig),1.e-2)
[1403]	171	zmax0(ig)=max(zmax0(ig),40.)
[972]	172	!IMmarche pas ?! if (f0(ig)<1.e-2) f0(ig)=1.e-2
	173	enddo
[878]	174
[1494]	175	if (prt_level.ge.20) then
	176	do ig=1,ngrid
	177	print*,'th_main ig f0',ig,f0(ig)
	178	enddo
	179	endif
[878]	180	!-----------------------------------------------------------------------
	181	! Calcul de T,q,ql a partir de Tl et qT dans l environnement
	182	! --------------------------------------------------------------------
	183	!
	184	CALL thermcell_env(ngrid,nlay,po,pt,pu,pv,pplay, &
	185	& pplev,zo,zh,zl,ztv,zthl,zu,zv,zpspsk,zqsat,lev_out)
	186
[938]	187	if (prt_level.ge.1) print*,'thermcell_main apres thermcell_env'
[878]	188
	189	!------------------------------------------------------------------------
	190	! --------------------
	191	!
	192	!
	193	! + + + + + + + + + + +
	194	!
	195	!
	196	! wa, fraca, wd, fracd -------------------- zlev(2), rhobarz
	197	! wh,wt,wo ...
	198	!
	199	! + + + + + + + + + + + zh,zu,zv,zo,rho
	200	!
	201	!
	202	! -------------------- zlev(1)
	203	! \\\\\\\\\\\\\\\\\\\\
	204	!
	205	!
	206
	207	!-----------------------------------------------------------------------
	208	! Calcul des altitudes des couches
	209	!-----------------------------------------------------------------------
	210
	211	do l=2,nlay
	212	zlev(:,l)=0.5*(pphi(:,l)+pphi(:,l-1))/RG
	213	enddo
[4089]	214	zlev(:,1)=0.
	215	zlev(:,nlay+1)=(2.*pphi(:,nlay)-pphi(:,nlay-1))/RG
[878]	216	do l=1,nlay
	217	zlay(:,l)=pphi(:,l)/RG
	218	enddo
	219	do l=1,nlay
	220	deltaz(:,l)=zlev(:,l+1)-zlev(:,l)
	221	enddo
	222
	223	!-----------------------------------------------------------------------
[4089]	224	! Calcul des densites et masses
[878]	225	!-----------------------------------------------------------------------
	226
[4089]	227	rho(:,:)=pplay(:,:)/(zpspsk(:,:)RDztv(:,:))
	228	if (prt_level.ge.10) write(lunout,*) 'WARNING thermcell_main rhobarz(:,1)=rho(:,1)'
[972]	229	rhobarz(:,1)=rho(:,1)
[878]	230	do l=2,nlay
	231	rhobarz(:,l)=0.5*(rho(:,l)+rho(:,l-1))
	232	enddo
	233	do l=1,nlay
	234	masse(:,l)=(pplev(:,l)-pplev(:,l+1))/RG
	235	enddo
[938]	236	if (prt_level.ge.1) print*,'thermcell_main apres initialisation'
[878]	237
	238	!------------------------------------------------------------------
	239	!
	240	! /\|\
	241	! -------- \| F_k+1 -------
	242	! ----> D_k
	243	! /\|\ <---- E_k , A_k
	244	! -------- \| F_k ---------
	245	! ----> D_k-1
	246	! <---- E_k-1 , A_k-1
	247	!
	248	!
	249	!
	250	!
	251	!
	252	! ---------------------------
	253	!
	254	! ----- F_lmax+1=0 ---------- \
	255	! lmax (zmax) \|
	256	! --------------------------- \|
	257	! \|
	258	! --------------------------- \|
	259	! \|
	260	! --------------------------- \|
	261	! \|
	262	! --------------------------- \|
	263	! \|
	264	! --------------------------- \|
	265	! \| E
	266	! --------------------------- \| D
	267	! \|
	268	! --------------------------- \|
	269	! \|
	270	! --------------------------- \ \|
	271	! lalim \| \|
	272	! --------------------------- \| \|
	273	! \| \|
	274	! --------------------------- \| \|
	275	! \| A \|
	276	! --------------------------- \| \|
	277	! \| \|
	278	! --------------------------- \| \|
	279	! lmin (=1 pour le moment) \| \|
	280	! ----- F_lmin=0 ------------ / /
	281	!
	282	! ---------------------------
	283	! //////////////////////////
	284	!
	285	!
	286	!=============================================================================
	287	! Calculs initiaux ne faisant pas intervenir les changements de phase
	288	!=============================================================================
	289
	290	!------------------------------------------------------------------
[1403]	291	! 1. alim_star est le profil vertical de l'alimentation a la base du
	292	! panache thermique, calcule a partir de la flotabilite de l'air sec
[878]	293	! 2. lmin et lalim sont les indices inferieurs et superieurs de alim_star
	294	!------------------------------------------------------------------
	295	!
	296	entr_star=0. ; detr_star=0. ; alim_star=0. ; alim_star_tot=0.
[1403]	297	lmin=1
[878]	298
	299	!-----------------------------------------------------------------------------
	300	! 3. wmax_sec et zmax_sec sont les vitesses et altitudes maximum d'un
	301	! panache sec conservatif (e=d=0) alimente selon alim_star
	302	! Il s'agit d'un calcul de type CAPE
[1403]	303	! zmax_sec est utilise pour determiner la geometrie du thermique.
[878]	304	!------------------------------------------------------------------------------
[1403]	305	!---------------------------------------------------------------------------------
	306	!calcul du melange et des variables dans le thermique
	307	!--------------------------------------------------------------------------------
[878]	308	!
[1403]	309	if (prt_level.ge.1) print*,'avant thermcell_plume ',lev_out
[878]	310
[3451]	311	!=====================================================================
	312	! Old version of thermcell_plume in thermcell_plume_6A.F90
	313	! It includes both thermcell_plume_6A and thermcell_plume_5B corresponding
	314	! to the 5B and 6A versions used for CMIP5 and CMIP6.
	315	! The latest was previously named thermcellV1_plume.
	316	! The new thermcell_plume is a clean version (removing obsolete
	317	! options) of thermcell_plume_6A.
	318	! The 3 versions are controled by
	319	! flag_thermals_ed <= 9 thermcell_plume_6A
	320	! <= 19 thermcell_plume_5B
	321	! else thermcell_plume (default 20 for convergence with 6A)
	322	! Fredho
	323	!=====================================================================
[878]	324
[1403]	325	if (iflag_thermals_ed<=9) then
	326	! print*,'THERM NOUVELLE/NOUVELLE Arnaud'
[3451]	327	CALL thermcell_plume_6A(itap,ngrid,nlay,ptimestep,ztv,zthl,po,zl,rhobarz,&
[1403]	328	& zlev,pplev,pphi,zpspsk,alim_star,alim_star_tot, &
	329	& lalim,f0,detr_star,entr_star,f_star,csc,ztva, &
	330	& ztla,zqla,zqta,zha,zw2,zw_est,ztva_est,zqsatth,lmix,lmix_bis,linter &
	331	& ,lev_out,lunout1,igout)
[878]	332
[3451]	333	elseif (iflag_thermals_ed<=19) then
[1403]	334	! print*,'THERM RIO et al 2010, version d Arnaud'
[3451]	335	CALL thermcell_plume_5B(itap,ngrid,nlay,ptimestep,ztv,zthl,po,zl,rhobarz,&
[1403]	336	& zlev,pplev,pphi,zpspsk,alim_star,alim_star_tot, &
	337	& lalim,f0,detr_star,entr_star,f_star,csc,ztva, &
	338	& ztla,zqla,zqta,zha,zw2,zw_est,ztva_est,zqsatth,lmix,lmix_bis,linter &
	339	& ,lev_out,lunout1,igout)
[3451]	340	else
	341	CALL thermcell_plume(itap,ngrid,nlay,ptimestep,ztv,zthl,po,zl,rhobarz,&
	342	& zlev,pplev,pphi,zpspsk,alim_star,alim_star_tot, &
	343	& lalim,f0,detr_star,entr_star,f_star,csc,ztva, &
	344	& ztla,zqla,zqta,zha,zw2,zw_est,ztva_est,zqsatth,lmix,lmix_bis,linter &
	345	& ,lev_out,lunout1,igout)
[1403]	346	endif
[878]	347
[972]	348	if (prt_level.ge.1) print*,'apres thermcell_plume ',lev_out
	349
[4089]	350	call test_ltherm(ngrid,nlay,pplay,lalim,ztv,po,ztva,zqla,f_star,zw2,'thermcell_plum lalim ')
	351	call test_ltherm(ngrid,nlay,pplay,lmix ,ztv,po,ztva,zqla,f_star,zw2,'thermcell_plum lmix ')
[878]	352
[938]	353	if (prt_level.ge.1) print*,'thermcell_main apres thermcell_plume'
	354	if (prt_level.ge.10) then
[972]	355	write(lunout1,*) 'Dans thermcell_main 2'
	356	write(lunout1,*) 'lmin ',lmin(igout)
	357	write(lunout1,*) 'lalim ',lalim(igout)
	358	write(lunout1,*) ' ig l alim_star entr_star detr_star f_star '
	359	write(lunout1,'(i6,i4,4e15.5)') (igout,l,alim_star(igout,l),entr_star(igout,l),detr_star(igout,l) &
[878]	360	& ,f_star(igout,l+1),l=1,nint(linter(igout))+5)
	361	endif
	362
	363	!-------------------------------------------------------------------------------
	364	! Calcul des caracteristiques du thermique:zmax,zmix,wmax
	365	!-------------------------------------------------------------------------------
	366	!
	367	CALL thermcell_height(ngrid,nlay,lalim,lmin,linter,lmix,zw2, &
[4094]	368	& zlev,lmax,zmax,zmax0,zmix,wmax)
[1403]	369	! Attention, w2 est transforme en sa racine carree dans cette routine
[4143]	370	! Le probleme vient du fait que linter et lmix sont souvent egaux a 1.
[1403]	371	wmax_tmp=0.
	372	do l=1,nlay
	373	wmax_tmp(:)=max(wmax_tmp(:),zw2(:,l))
	374	enddo
	375	! print*,"ZMAX ",lalim,lmin,linter,lmix,lmax,zmax,zmax0,zmix,wmax
[878]	376
	377
[1403]	378
[4089]	379	call test_ltherm(ngrid,nlay,pplay,lalim,ztv,po,ztva,zqla,f_star,zw2,'thermcell_heig lalim ')
	380	call test_ltherm(ngrid,nlay,pplay,lmin ,ztv,po,ztva,zqla,f_star,zw2,'thermcell_heig lmin ')
	381	call test_ltherm(ngrid,nlay,pplay,lmix ,ztv,po,ztva,zqla,f_star,zw2,'thermcell_heig lmix ')
	382	call test_ltherm(ngrid,nlay,pplay,lmax ,ztv,po,ztva,zqla,f_star,zw2,'thermcell_heig lmax ')
[878]	383
[938]	384	if (prt_level.ge.1) print*,'thermcell_main apres thermcell_height'
[878]	385
	386	!-------------------------------------------------------------------------------
	387	! Fermeture,determination de f
	388	!-------------------------------------------------------------------------------
[1026]	389	!
[1403]	390	!
	391	CALL thermcell_dry(ngrid,nlay,zlev,pphi,ztv,alim_star, &
[4094]	392	& lalim,lmin,zmax_sec,wmax_sec)
[878]	393
[1998]	394
[4089]	395	call test_ltherm(ngrid,nlay,pplay,lmin,ztv,po,ztva,zqla,f_star,zw2,'thermcell_dry lmin ')
	396	call test_ltherm(ngrid,nlay,pplay,lalim,ztv,po,ztva,zqla,f_star,zw2,'thermcell_dry lalim ')
[1403]	397
	398	if (prt_level.ge.1) print*,'thermcell_main apres thermcell_dry'
	399	if (prt_level.ge.10) then
	400	write(lunout1,*) 'Dans thermcell_main 1b'
	401	write(lunout1,*) 'lmin ',lmin(igout)
	402	write(lunout1,*) 'lalim ',lalim(igout)
	403	write(lunout1,*) ' ig l alim_star entr_star detr_star f_star '
	404	write(lunout1,'(i6,i4,e15.5)') (igout,l,alim_star(igout,l) &
	405	& ,l=1,lalim(igout)+4)
	406	endif
	407
	408
	409
	410
	411	! Choix de la fonction d'alimentation utilisee pour la fermeture.
	412	! Apparemment sans importance
	413	alim_star_clos(:,:)=alim_star(:,:)
	414	alim_star_clos(:,:)=entr_star(:,:)+alim_star(:,:)
[1998]	415	!
	416	!CR Appel de la fermeture seche
	417	if (iflag_thermals_closure.eq.1) then
[1403]	418
[4094]	419	CALL thermcell_closure(ngrid,nlay,r_aspect_thermals,ptimestep,rho, &
	420	& zlev,lalim,alim_star_clos,zmax_sec,wmax_sec,f)
[878]	421
[1403]	422	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	423	! Appel avec les zmax et wmax tenant compte de la condensation
	424	! Semble moins bien marcher
[1998]	425	else if (iflag_thermals_closure.eq.2) then
	426
	427	CALL thermcell_closure(ngrid,nlay,r_aspect_thermals,ptimestep,rho, &
[4094]	428	& zlev,lalim,alim_star,zmax,wmax,f)
[1998]	429
[4094]	430
[1998]	431	endif
	432
[1403]	433	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	434
[938]	435	if(prt_level.ge.1)print*,'thermcell_closure apres thermcell_closure'
[878]	436
[972]	437	if (tau_thermals>1.) then
	438	lambda=exp(-ptimestep/tau_thermals)
	439	f0=(1.-lambda)f+lambdaf0
	440	else
	441	f0=f
	442	endif
	443
	444	! Test valable seulement en 1D mais pas genant
	445	if (.not. (f0(1).ge.0.) ) then
[1403]	446	abort_message = '.not. (f0(1).ge.0.)'
[2311]	447	CALL abort_physic (modname,abort_message,1)
[972]	448	endif
	449
[878]	450	!-------------------------------------------------------------------------------
	451	!deduction des flux
	452
[972]	453	CALL thermcell_flux2(ngrid,nlay,ptimestep,masse, &
[878]	454	& lalim,lmax,alim_star, &
	455	& entr_star,detr_star,f,rhobarz,zlev,zw2,fm,entr, &
[972]	456	& detr,zqla,lev_out,lunout1,igout)
	457	!IM 060508 & detr,zqla,zmax,lev_out,lunout,igout)
[878]	458
[938]	459	if (prt_level.ge.1) print*,'thermcell_main apres thermcell_flux'
[4089]	460	call test_ltherm(ngrid,nlay,pplay,lalim,ztv,po,ztva,zqla,f_star,zw2,'thermcell_flux lalim ')
	461	call test_ltherm(ngrid,nlay,pplay,lmax ,ztv,po,ztva,zqla,f_star,zw2,'thermcell_flux lmax ')
[878]	462
	463	!------------------------------------------------------------------
[972]	464	! On ne prend pas directement les profils issus des calculs precedents
	465	! mais on s'autorise genereusement une relaxation vers ceci avec
	466	! une constante de temps tau_thermals (typiquement 1800s).
	467	!------------------------------------------------------------------
[878]	468
[972]	469	if (tau_thermals>1.) then
	470	lambda=exp(-ptimestep/tau_thermals)
	471	fm0=(1.-lambda)fm+lambdafm0
	472	entr0=(1.-lambda)entr+lambdaentr0
[1403]	473	detr0=(1.-lambda)detr+lambdadetr0
[878]	474	else
	475	fm0=fm
	476	entr0=entr
	477	detr0=detr
	478	endif
	479
[972]	480	!c------------------------------------------------------------------
	481	! calcul du transport vertical
	482	!------------------------------------------------------------------
	483
[1738]	484	call thermcell_dq(ngrid,nlay,dqimpl,ptimestep,fm0,entr0,masse, &
[878]	485	& zthl,zdthladj,zta,lev_out)
[1738]	486	call thermcell_dq(ngrid,nlay,dqimpl,ptimestep,fm0,entr0,masse, &
[878]	487	& po,pdoadj,zoa,lev_out)
	488
[4089]	489	#ifdef ISO
[4143]	490	! C Risi: on utilise directement la meme routine
	491	do ixt=1,ntiso
[4089]	492	do ll=1,nlay
	493	DO ig=1,ngrid
	494	xtpo_tmp(ig,ll)=xtpo(ixt,ig,ll)
	495	xtzo_tmp(ig,ll)=xtzo(ixt,ig,ll)
	496	enddo
	497	enddo
	498	call thermcell_dq(ngrid,nlay,dqimpl,ptimestep,fm0,entr0,masse, &
	499	& xtpo_tmp,xtpdoadj_tmp,xtzo_tmp,lev_out)
	500	do ll=1,nlay
	501	DO ig=1,ngrid
	502	xtpdoadj(ixt,ig,ll)=xtpdoadj_tmp(ig,ll)
	503	enddo
	504	enddo
[4143]	505	enddo
[4089]	506	#endif
	507
	508	#ifdef ISO
	509	#ifdef ISOVERIF
	510	DO ll=1,nlay
	511	DO ig=1,ngrid
	512	if (iso_eau.gt.0) then
	513	call iso_verif_egalite(xtpo(iso_eau,ig,ll), &
	514	& po(ig,ll),'thermcell_main 594')
	515	call iso_verif_egalite(xtpdoadj(iso_eau,ig,ll), &
	516	& pdoadj(ig,ll),'thermcell_main 596')
	517	endif
	518	if (iso_HDO.gt.0) then
	519	call iso_verif_aberrant_encadre(xtpo(iso_hdo,ig,ll) &
	520	& /po(ig,ll),'thermcell_main 610')
	521	endif
	522	enddo
	523	enddo !DO ll=1,nlay
	524	write(,) 'thermcell_main 600 tmp: apres thermcell_dq'
	525	#endif
	526	#endif
	527
	528
	529
[883]	530	!------------------------------------------------------------------
	531	! Calcul de la fraction de l'ascendance
	532	!------------------------------------------------------------------
[4089]	533	do ig=1,ngrid
[883]	534	fraca(ig,1)=0.
	535	fraca(ig,nlay+1)=0.
	536	enddo
	537	do l=2,nlay
[4089]	538	do ig=1,ngrid
[883]	539	if (zw2(ig,l).gt.1.e-10) then
	540	fraca(ig,l)=fm(ig,l)/(rhobarz(ig,l)*zw2(ig,l))
	541	else
	542	fraca(ig,l)=0.
	543	endif
	544	enddo
	545	enddo
	546
	547	!------------------------------------------------------------------
	548	! calcul du transport vertical du moment horizontal
	549	!------------------------------------------------------------------
[878]	550
[972]	551	!IM 090508
[1738]	552	if (dvdq == 0 ) then
[883]	553
[878]	554	! Calcul du transport de V tenant compte d'echange par gradient
	555	! de pression horizontal avec l'environnement
	556
	557	call thermcell_dv2(ngrid,nlay,ptimestep,fm0,entr0,masse &
[1738]	558	! & ,fraca*dvdq,zmax &
	559	& ,fraca,zmax &
[972]	560	& ,zu,zv,pduadj,pdvadj,zua,zva,lev_out)
[1403]	561
[878]	562	else
	563
	564	! calcul purement conservatif pour le transport de V
[1738]	565	call thermcell_dq(ngrid,nlay,dqimpl,ptimestep,fm0,entr0,masse &
[878]	566	& ,zu,pduadj,zua,lev_out)
[1738]	567	call thermcell_dq(ngrid,nlay,dqimpl,ptimestep,fm0,entr0,masse &
[878]	568	& ,zv,pdvadj,zva,lev_out)
[1738]	569
[878]	570	endif
	571
	572	! print*,'13 OK convect8'
	573	do l=1,nlay
	574	do ig=1,ngrid
	575	pdtadj(ig,l)=zdthladj(ig,l)*zpspsk(ig,l)
	576	enddo
	577	enddo
	578
[972]	579	if (prt_level.ge.1) print*,'14 OK convect8'
[878]	580	!------------------------------------------------------------------
	581	! Calculs de diagnostiques pour les sorties
	582	!------------------------------------------------------------------
	583	!calcul de fraca pour les sorties
	584
	585	if (sorties) then
[972]	586	if (prt_level.ge.1) print*,'14a OK convect8'
[878]	587	! calcul du niveau de condensation
	588	! initialisation
	589	do ig=1,ngrid
[879]	590	nivcon(ig)=0
[878]	591	zcon(ig)=0.
	592	enddo
	593	!nouveau calcul
	594	do ig=1,ngrid
	595	CHI=zh(ig,1)/(1669.0-122.0*zo(ig,1)/zqsat(ig,1)-zh(ig,1))
	596	pcon(ig)=pplay(ig,1)(zo(ig,1)/zqsat(ig,1))*CHI
	597	enddo
[1403]	598	!IM do k=1,nlay
	599	do k=1,nlay-1
[878]	600	do ig=1,ngrid
	601	if ((pcon(ig).le.pplay(ig,k)) &
	602	& .and.(pcon(ig).gt.pplay(ig,k+1))) then
	603	zcon2(ig)=zlay(ig,k)-(pcon(ig)-pplay(ig,k))/(RG*rho(ig,k))/100.
	604	endif
	605	enddo
	606	enddo
[1403]	607	!IM
[1494]	608	ierr=0
[1403]	609	do ig=1,ngrid
	610	if (pcon(ig).le.pplay(ig,nlay)) then
	611	zcon2(ig)=zlay(ig,nlay)-(pcon(ig)-pplay(ig,nlay))/(RG*rho(ig,nlay))/100.
[1494]	612	ierr=1
	613	endif
	614	enddo
	615	if (ierr==1) then
[1403]	616	abort_message = 'thermcellV0_main: les thermiques vont trop haut '
[2311]	617	CALL abort_physic (modname,abort_message,1)
[1494]	618	endif
	619
[972]	620	if (prt_level.ge.1) print*,'14b OK convect8'
[878]	621	do k=nlay,1,-1
	622	do ig=1,ngrid
	623	if (zqla(ig,k).gt.1e-10) then
	624	nivcon(ig)=k
	625	zcon(ig)=zlev(ig,k)
	626	endif
	627	enddo
	628	enddo
[972]	629	if (prt_level.ge.1) print*,'14c OK convect8'
[878]	630	!calcul des moments
	631	!initialisation
	632	do l=1,nlay
	633	do ig=1,ngrid
	634	q2(ig,l)=0.
	635	wth2(ig,l)=0.
	636	wth3(ig,l)=0.
	637	ratqscth(ig,l)=0.
	638	ratqsdiff(ig,l)=0.
	639	enddo
	640	enddo
[972]	641	if (prt_level.ge.1) print*,'14d OK convect8'
[1146]	642	if (prt_level.ge.10)write(lunout,*) &
	643	& 'WARNING thermcell_main wth2=0. si zw2 > 1.e-10'
[878]	644	do l=1,nlay
	645	do ig=1,ngrid
	646	zf=fraca(ig,l)
	647	zf2=zf/(1.-zf)
[972]	648	!
[1403]	649	thetath2(ig,l)=zf2(ztla(ig,l)-zthl(ig,l))*2
[972]	650	if(zw2(ig,l).gt.1.e-10) then
	651	wth2(ig,l)=zf2(zw2(ig,l))*2
	652	else
	653	wth2(ig,l)=0.
	654	endif
[878]	655	wth3(ig,l)=zf2(1-2.fraca(ig,l))/(1-fraca(ig,l)) &
	656	& zw2(ig,l)zw2(ig,l)*zw2(ig,l)
	657	q2(ig,l)=zf2(zqta(ig,l)1000.-po(ig,l)1000.)*2
	658	!test: on calcul q2/po=ratqsc
	659	ratqscth(ig,l)=sqrt(max(q2(ig,l),1.e-6)/(po(ig,l)*1000.))
	660	enddo
	661	enddo
[1403]	662	!calcul des flux: q, thetal et thetav
	663	do l=1,nlay
	664	do ig=1,ngrid
	665	wq(ig,l)=fraca(ig,l)zw2(ig,l)(zqta(ig,l)1000.-po(ig,l)1000.)
	666	wthl(ig,l)=fraca(ig,l)zw2(ig,l)(ztla(ig,l)-zthl(ig,l))
	667	wthv(ig,l)=fraca(ig,l)zw2(ig,l)(ztva(ig,l)-ztv(ig,l))
	668	enddo
[879]	669	enddo
[1638]	670
[878]	671	!calcul du ratqscdiff
[972]	672	if (prt_level.ge.1) print*,'14e OK convect8'
[878]	673	var=0.
	674	vardiff=0.
	675	ratqsdiff(:,:)=0.
[1494]	676
[4089]	677	do l=1,nlay
[1494]	678	do ig=1,ngrid
	679	if (l<=lalim(ig)) then
[878]	680	var=var+alim_star(ig,l)zqta(ig,l)1000.
[1494]	681	endif
[878]	682	enddo
	683	enddo
[1494]	684
[972]	685	if (prt_level.ge.1) print*,'14f OK convect8'
[1494]	686
[4089]	687	do l=1,nlay
[1494]	688	do ig=1,ngrid
	689	if (l<=lalim(ig)) then
	690	zf=fraca(ig,l)
	691	zf2=zf/(1.-zf)
	692	vardiff=vardiff+alim_star(ig,l)(zqta(ig,l)1000.-var)**2
	693	endif
	694	enddo
[878]	695	enddo
[1494]	696
[972]	697	if (prt_level.ge.1) print*,'14g OK convect8'
[4089]	698	do l=1,nlay
	699	do ig=1,ngrid
	700	ratqsdiff(ig,l)=sqrt(vardiff)/(po(ig,l)*1000.)
	701	enddo
	702	enddo
[878]	703	endif
	704
[938]	705	if (prt_level.ge.1) print*,'thermcell_main FIN OK'
[878]	706
[4094]	707	RETURN
[4089]	708	end subroutine thermcell_main
[878]	709
[4089]	710	!=============================================================================
	711	!/////////////////////////////////////////////////////////////////////////////
	712	!=============================================================================
	713	subroutine test_ltherm(ngrid,nlay,pplay,long,ztv,po,ztva, & ! in
	714	& zqla,f_star,zw2,comment) ! in
	715	!=============================================================================
	716	USE thermcell_ini_mod, ONLY: prt_level
[938]	717	IMPLICIT NONE
[878]	718
[4089]	719	integer i, k, ngrid,nlay
	720	real, intent(in), dimension(ngrid,nlay) :: pplay,ztv,po,ztva,zqla
	721	real, intent(in), dimension(ngrid,nlay) :: f_star,zw2
	722	integer, intent(in), dimension(ngrid) :: long
[878]	723	real seuil
	724	character*21 comment
[4133]	725
[4089]	726	seuil=0.25
[878]	727
[938]	728	if (prt_level.ge.1) THEN
	729	print*,'WARNING !!! TEST ',comment
	730	endif
[879]	731	return
	732
[878]	733	! test sur la hauteur des thermiques ...
[4089]	734	do i=1,ngrid
[972]	735	!IMtemp if (pplay(i,long(i)).lt.seuil*pplev(i,1)) then
	736	if (prt_level.ge.10) then
[878]	737	print*,'WARNING ',comment,' au point ',i,' K= ',long(i)
	738	print,' K P(MB) THV(K) Qenv(g/kg)THVA QLA(g/kg) F W2'
[4089]	739	do k=1,nlay
[878]	740	write(6,'(i3,7f10.3)') k,pplay(i,k),ztv(i,k),1000po(i,k),ztva(i,k),1000zqla(i,k),f_star(i,k),zw2(i,k)
	741	enddo
[972]	742	endif
[878]	743	enddo
	744
	745
	746	return
	747	end
	748
[4089]	749	! nrlmd le 10/04/2012 Transport de la TKE par le thermique moyen pour la fermeture en ALP
	750	! On transporte pbl_tke pour donner therm_tke
[4143]	751	! Copie conforme de la subroutine DTKE dans physiq.F ecrite par Frederic Hourdin
[4089]	752
	753	!=======================================================================
	754	!///////////////////////////////////////////////////////////////////////
	755	!=======================================================================
	756
	757	subroutine thermcell_tke_transport( &
	758	& ngrid,nlay,ptimestep,fm0,entr0,rg,pplev, & ! in
	759	& therm_tke_max) ! out
	760	USE thermcell_ini_mod, ONLY: prt_level
[1638]	761	implicit none
	762
	763	!=======================================================================
	764	!
	765	! Calcul du transport verticale dans la couche limite en presence
	766	! de "thermiques" explicitement representes
	767	! calcul du dq/dt une fois qu'on connait les ascendances
	768	!
	769	!=======================================================================
	770
[4089]	771	integer ngrid,nlay
[1638]	772
[4089]	773	real, intent(in) :: ptimestep
	774	real, intent(in), dimension(ngrid,nlay+1) :: fm0,pplev
	775	real, intent(in), dimension(ngrid,nlay) :: entr0
	776	real, intent(in) :: rg
	777	real, intent(out), dimension(ngrid,nlay) :: therm_tke_max
	778
[1638]	779	real detr0(ngrid,nlay)
[4089]	780	real masse0(ngrid,nlay)
[1638]	781	real masse(ngrid,nlay),fm(ngrid,nlay+1)
	782	real entr(ngrid,nlay)
	783	real q(ngrid,nlay)
	784	integer lev_out ! niveau pour les print
	785
	786	real qa(ngrid,nlay),detr(ngrid,nlay),wqd(ngrid,nlay+1)
	787	integer ig,k
	788
	789
	790	lev_out=0
	791
	792
	793	if (prt_level.ge.1) print*,'Q2 THERMCEL_DQ 0'
	794
	795	! calcul du detrainement
	796	do k=1,nlay
	797	detr0(:,k)=fm0(:,k)-fm0(:,k+1)+entr0(:,k)
	798	masse0(:,k)=(pplev(:,k)-pplev(:,k+1))/RG
	799	enddo
	800
	801
	802	! Decalage vertical des entrainements et detrainements.
	803	masse(:,1)=0.5*masse0(:,1)
	804	entr(:,1)=0.5*entr0(:,1)
	805	detr(:,1)=0.5*detr0(:,1)
	806	fm(:,1)=0.
	807	do k=1,nlay-1
	808	masse(:,k+1)=0.5*(masse0(:,k)+masse0(:,k+1))
	809	entr(:,k+1)=0.5*(entr0(:,k)+entr0(:,k+1))
	810	detr(:,k+1)=0.5*(detr0(:,k)+detr0(:,k+1))
	811	fm(:,k+1)=fm(:,k)+entr(:,k)-detr(:,k)
	812	enddo
	813	fm(:,nlay+1)=0.
	814
	815
	816	q(:,:)=therm_tke_max(:,:)
	817	!!! nrlmd le 16/09/2010
	818	do ig=1,ngrid
	819	qa(ig,1)=q(ig,1)
	820	enddo
	821	!!!
	822
	823	if (1==1) then
	824	do k=2,nlay
	825	do ig=1,ngrid
	826	if ((fm(ig,k+1)+detr(ig,k))*ptimestep.gt. &
	827	& 1.e-5*masse(ig,k)) then
	828	qa(ig,k)=(fm(ig,k)qa(ig,k-1)+entr(ig,k)q(ig,k)) &
	829	& /(fm(ig,k+1)+detr(ig,k))
	830	else
	831	qa(ig,k)=q(ig,k)
	832	endif
	833	if (qa(ig,k).lt.0.) then
	834	! print*,'qa<0!!!'
	835	endif
	836	if (q(ig,k).lt.0.) then
	837	! print*,'q<0!!!'
	838	endif
	839	enddo
	840	enddo
	841
	842	! Calcul du flux subsident
	843
	844	do k=2,nlay
	845	do ig=1,ngrid
	846	wqd(ig,k)=fm(ig,k)*q(ig,k)
	847	if (wqd(ig,k).lt.0.) then
	848	! print*,'wqd<0!!!'
	849	endif
	850	enddo
	851	enddo
	852	do ig=1,ngrid
	853	wqd(ig,1)=0.
	854	wqd(ig,nlay+1)=0.
	855	enddo
	856
	857	! Calcul des tendances
	858	do k=1,nlay
	859	do ig=1,ngrid
	860	q(ig,k)=q(ig,k)+(detr(ig,k)qa(ig,k)-entr(ig,k)q(ig,k) &
	861	& -wqd(ig,k)+wqd(ig,k+1)) &
	862	& *ptimestep/masse(ig,k)
	863	enddo
	864	enddo
	865
	866	endif
	867
	868	therm_tke_max(:,:)=q(:,:)
	869
	870	return
	871	!!! fin nrlmd le 10/04/2012
	872	end
	873

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format