Context Navigation

physiq_mod.F90 @ 3756

Last change on this file since 3756 was 3756, checked in by oboucher, 4 years ago
The fraction of SW down radiation that is diffuse is extracted from radlwsw.F90 and passed on to pbl_surface for inclusion in fields_out for transfer to ORCHIDEE if it requested in input file coupling_fields.def. Hence there is nothing automatic here. The fraction of SW down radiation is also added as a diagnostic. To satisfy the case when this new quantity is used in ORCHIDEE, then it is added in the restart (and read in case it is there).
Property copyright set to Name of program: LMDZ Creation date: 1984 Version: LMDZ5 License: CeCILL version 2 Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539 See the license file in the root directory Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 185.0 KB

Line
1	!
2	! $Id: physiq_mod.F90 3756 2020-07-10 21:50:17Z oboucher $
3	!
4	!#define IO_DEBUG
5	MODULE physiq_mod
6
7	IMPLICIT NONE
8
9	CONTAINS
10
11	SUBROUTINE physiq (nlon,nlev, &
12	debut,lafin,pdtphys_, &
13	paprs,pplay,pphi,pphis,presnivs, &
14	u,v,rot,t,qx, &
15	flxmass_w, &
16	d_u, d_v, d_t, d_qx, d_ps)
17
18	USE assert_m, only: assert
19	USE ioipsl, only: histbeg, histvert, histdef, histend, histsync, &
20	histwrite, ju2ymds, ymds2ju, getin
21	USE geometry_mod, ONLY: cell_area, latitude_deg, longitude_deg
22	USE phys_cal_mod, only: year_len, mth_len, days_elapsed, jh_1jan, &
23	year_cur, mth_cur,jD_cur, jH_cur, jD_ref, day_cur, hour
24	USE write_field_phy
25	USE dimphy
26	USE infotrac_phy, ONLY: nqtot, nbtr, nqo, type_trac
27	USE mod_grid_phy_lmdz, ONLY: nbp_lon, nbp_lat, nbp_lev, klon_glo, grid1dTo2d_glo, grid_type, unstructured
28	USE mod_phys_lmdz_para
29	USE iophy
30	USE print_control_mod, ONLY: mydebug=>debug , lunout, prt_level
31	USE phystokenc_mod, ONLY: offline, phystokenc
32	USE time_phylmdz_mod, only: raz_date, day_step_phy, update_time,current_time
33	USE vampir
34	USE pbl_surface_mod, ONLY : pbl_surface
35	USE change_srf_frac_mod
36	USE surface_data, ONLY : type_ocean, ok_veget, ok_snow
37	USE tropopause_m, ONLY: dyn_tropopause
38	#ifdef CPP_Dust
39	USE phytracr_spl_mod, ONLY: phytracr_spl
40	#endif
41	#ifdef CPP_StratAer
42	USE strataer_mod, ONLY: strataer_init
43	#endif
44	USE phys_local_var_mod, ONLY: phys_local_var_init, phys_local_var_end, &
45	! [Variables internes non sauvegardees de la physique]
46	! Variables locales pour effectuer les appels en serie
47	t_seri,q_seri,ql_seri,qs_seri,u_seri,v_seri,tr_seri, &
48	! Dynamic tendencies (diagnostics)
49	d_t_dyn,d_q_dyn,d_ql_dyn,d_qs_dyn,d_u_dyn,d_v_dyn,d_tr_dyn, &
50	d_q_dyn2d,d_ql_dyn2d,d_qs_dyn2d, &
51	! Physic tendencies
52	d_t_con,d_q_con,d_u_con,d_v_con, &
53	d_tr, & !! to be removed?? (jyg)
54	d_t_wake,d_q_wake, &
55	d_t_lwr,d_t_lw0,d_t_swr,d_t_sw0, &
56	d_t_ajsb,d_q_ajsb, &
57	d_t_ajs,d_q_ajs,d_u_ajs,d_v_ajs, &
58	d_t_ajs_w,d_q_ajs_w, &
59	d_t_ajs_x,d_q_ajs_x, &
60	!
61	d_t_eva,d_q_eva,d_ql_eva,d_qi_eva, &
62	d_t_lsc,d_q_lsc,d_ql_lsc,d_qi_lsc, &
63	d_t_lscst,d_q_lscst, &
64	d_t_lscth,d_q_lscth, &
65	plul_st,plul_th, &
66	!
67	d_t_vdf,d_q_vdf,d_u_vdf,d_v_vdf,d_t_diss, &
68	d_ts, &
69	!
70	d_t_oli,d_u_oli,d_v_oli, &
71	d_t_oro,d_u_oro,d_v_oro, &
72	d_t_oro_gw,d_u_oro_gw,d_v_oro_gw, &
73	d_t_lif,d_u_lif,d_v_lif, &
74	d_t_ec, &
75	!
76	du_gwd_hines,dv_gwd_hines,d_t_hin, &
77	dv_gwd_rando,dv_gwd_front, &
78	east_gwstress,west_gwstress, &
79	d_q_ch4, &
80	! Special RRTM
81	ZLWFT0_i,ZSWFT0_i,ZFLDN0, &
82	ZFLUP0,ZFSDN0,ZFSUP0, &
83	!
84	topswad_aero,solswad_aero, &
85	topswai_aero,solswai_aero, &
86	topswad0_aero,solswad0_aero, &
87	!LW additional
88	toplwad_aero,sollwad_aero, &
89	toplwai_aero,sollwai_aero, &
90	toplwad0_aero,sollwad0_aero, &
91	!
92	topsw_aero,solsw_aero, &
93	topsw0_aero,solsw0_aero, &
94	topswcf_aero,solswcf_aero, &
95	tausum_aero,tau3d_aero, &
96	drytausum_aero, &
97	!
98	!variables CFMIP2/CMIP5
99	topswad_aerop, solswad_aerop, &
100	topswai_aerop, solswai_aerop, &
101	topswad0_aerop, solswad0_aerop, &
102	topsw_aerop, topsw0_aerop, &
103	solsw_aerop, solsw0_aerop, &
104	topswcf_aerop, solswcf_aerop, &
105	!LW diagnostics
106	toplwad_aerop, sollwad_aerop, &
107	toplwai_aerop, sollwai_aerop, &
108	toplwad0_aerop, sollwad0_aerop, &
109	!
110	ptstar, pt0, slp, &
111	!
112	bils, &
113	!
114	cldh, cldl,cldm, cldq, cldt, &
115	JrNt, &
116	dthmin, evap, fder, plcl, plfc, &
117	prw, prlw, prsw, &
118	s_lcl, s_pblh, s_pblt, s_therm, &
119	cdragm, cdragh, &
120	zustar, zu10m, zv10m, rh2m, qsat2m, &
121	zq2m, zt2m, weak_inversion, &
122	zq2m_cor,zt2m_cor,zu10m_cor,zv10m_cor, & ! pour corriger d'un bug
123	zrh2m_cor,zqsat2m_cor, &
124	zt2m_min_mon, zt2m_max_mon, & ! pour calcul_divers.h
125	t2m_min_mon, t2m_max_mon, & ! pour calcul_divers.h
126	!
127	s_pblh_x, s_pblh_w, &
128	s_lcl_x, s_lcl_w, &
129	!
130	slab_wfbils, tpot, tpote, &
131	ue, uq, ve, vq, zxffonte, &
132	uwat, vwat, &
133	zxfqcalving, zxfluxlat, &
134	zxrunofflic, &
135	zxtsol, snow_lsc, zxfqfonte, zxqsurf, &
136	rain_lsc, rain_num, &
137	!
138	sens_x, sens_w, &
139	zxfluxlat_x, zxfluxlat_w, &
140	!
141	d_t_vdf_x, d_t_vdf_w, &
142	d_q_vdf_x, d_q_vdf_w, &
143	pbl_tke_input, &
144	t_therm, q_therm, u_therm, v_therm, &
145	cdragh_x, cdragh_w, &
146	cdragm_x, cdragm_w, &
147	kh, kh_x, kh_w, &
148	!
149	wake_k, &
150	alp_wake, &
151	wake_h, wake_omg, &
152	! tendencies of delta T and delta q:
153	d_deltat_wk, d_deltaq_wk, & ! due to wakes
154	d_deltat_wk_gw, d_deltaq_wk_gw, & ! due to wake induced gravity waves
155	d_deltat_vdf, d_deltaq_vdf, & ! due to vertical diffusion
156	d_deltat_the, d_deltaq_the, & ! due to thermals
157	d_deltat_ajs_cv, d_deltaq_ajs_cv, & ! due to dry adjustment of (w) before convection
158	! tendencies of wake fractional area and wake number per unit area:
159	d_s_wk, d_dens_a_wk, d_dens_wk, & ! due to wakes
160	!!! d_s_vdf, d_dens_a_vdf, d_dens_vdf, & ! due to vertical diffusion
161	!!! d_s_the, d_dens_a_the, d_dens_the, & ! due to thermals
162	!
163	ptconv, ratqsc, &
164	wbeff, convoccur, zmax_th, &
165	sens, flwp, fiwp, &
166	alp_bl_conv,alp_bl_det, &
167	alp_bl_fluct_m,alp_bl_fluct_tke, &
168	alp_bl_stat, n2, s2, &
169	proba_notrig, random_notrig, &
170	cv_gen, &
171	!
172	dnwd0, &
173	omega, &
174	epmax_diag, &
175	! Deep convective variables used in phytrac
176	pmflxr, pmflxs, &
177	wdtrainA, wdtrainS, wdtrainM, &
178	upwd, dnwd, &
179	ep, &
180	da, mp, &
181	phi, &
182	wght_cvfd, &
183	phi2, &
184	d1a, dam, &
185	ev, &
186	elij, &
187	qtaa, &
188	clw, &
189	epmlmMm, eplaMm, &
190	sij, &
191	!
192	cldemi, &
193	cldfra, cldtau, fiwc, &
194	fl, re, flwc, &
195	ref_liq, ref_ice, theta, &
196	ref_liq_pi, ref_ice_pi, &
197	zphi, zx_rh, &
198	pmfd, pmfu, &
199	!
200	t2m, fluxlat, &
201	fsollw, evap_pot, &
202	fsolsw, wfbils, wfbilo, &
203	wfevap, wfrain, wfsnow, &
204	prfl, psfl, fraca, Vprecip, &
205	zw2, &
206	!
207	fluxu, fluxv, &
208	fluxt, &
209	!
210	uwriteSTD, vwriteSTD, & !pour calcul_STDlev.h
211	wwriteSTD, phiwriteSTD, & !pour calcul_STDlev.h
212	qwriteSTD, twriteSTD, rhwriteSTD, & !pour calcul_STDlev.h
213	!
214	beta_prec, &
215	rneb, &
216	zxsnow,snowhgt,qsnow,to_ice,sissnow,runoff,albsol3_lic
217	!
218	USE phys_state_var_mod ! Variables sauvegardees de la physique
219	#ifdef CPP_Dust
220	USE phys_output_write_spl_mod
221	#else
222	USE phys_output_var_mod ! Variables pour les ecritures des sorties
223	#endif
224
225	USE phys_output_write_mod
226	USE fonte_neige_mod, ONLY : fonte_neige_get_vars
227	USE phys_output_mod
228	USE phys_output_ctrlout_mod
229	USE open_climoz_m, only: open_climoz ! ozone climatology from a file
230	USE regr_pr_time_av_m, only: regr_pr_time_av
231	USE netcdf95, only: nf95_close
232	!IM for NMC files
233	USE netcdf, only: nf90_fill_real
234	USE mod_phys_lmdz_mpi_data, only: is_mpi_root
235	USE aero_mod
236	USE ozonecm_m, only: ozonecm ! ozone of J.-F. Royer
237	USE conf_phys_m, only: conf_phys
238	USE radlwsw_m, only: radlwsw
239	USE phyaqua_mod, only: zenang_an
240	USE time_phylmdz_mod, only: day_step_phy, annee_ref, day_ref, itau_phy, &
241	start_time, pdtphys, day_ini
242	USE tracinca_mod, ONLY: config_inca
243	#ifdef CPP_XIOS
244	USE wxios, ONLY: missing_val, missing_val_omp
245	USE xios, ONLY: xios_get_field_attr, xios_field_is_active
246	#endif
247	#ifdef REPROBUS
248	USE CHEM_REP, ONLY : Init_chem_rep_xjour, &
249	d_q_rep,d_ql_rep,d_qi_rep,ptrop,ttrop, &
250	ztrop, gravit,itroprep, Z1,Z2,fac,B
251	#endif
252	USE indice_sol_mod
253	USE phytrac_mod, ONLY : phytrac_init, phytrac
254	USE carbon_cycle_mod, ONLY : infocfields_init, RCO2_glo, carbon_cycle_rad
255
256	#ifdef CPP_RRTM
257	USE YOERAD, ONLY : NRADLP
258	USE YOESW, ONLY : RSUN
259	#endif
260	USE ioipsl_getin_p_mod, ONLY : getin_p
261
262	#ifndef CPP_XIOS
263	USE paramLMDZ_phy_mod
264	#endif
265
266	USE cmp_seri_mod
267	USE add_phys_tend_mod, only : add_pbl_tend, add_phys_tend, diag_phys_tend, prt_enerbil, &
268	& fl_ebil, fl_cor_ebil
269
270	!IM stations CFMIP
271	USE CFMIP_point_locations
272	USE FLOTT_GWD_rando_m, only: FLOTT_GWD_rando
273	USE ACAMA_GWD_rando_m, only: ACAMA_GWD_rando
274	USE VERTICAL_LAYERS_MOD, ONLY: aps,bps, ap, bp
275	USE etat0_limit_unstruct_mod
276	#ifdef CPP_XIOS
277	USE xios, ONLY: xios_update_calendar, xios_context_finalize
278	#endif
279	USE limit_read_mod, ONLY : init_limit_read
280	USE regr_horiz_time_climoz_m, ONLY: regr_horiz_time_climoz
281	USE readaerosol_mod, ONLY : init_aero_fromfile
282	USE readaerosolstrato_m, ONLY : init_readaerosolstrato
283
284	IMPLICIT NONE
285	!>======================================================================
286	!!
287	!! Auteur(s) Z.X. Li (LMD/CNRS) date: 19930818
288	!!
289	!! Objet: Moniteur general de la physique du modele
290	!!AA Modifications quant aux traceurs :
291	!!AA - uniformisation des parametrisations ds phytrac
292	!!AA - stockage des moyennes des champs necessaires
293	!!AA en mode traceur off-line
294	!!======================================================================
295	!! CLEFS CPP POUR LES IO
296	!! =====================
297	#define histNMC
298	!!======================================================================
299	!! modif ( P. Le Van , 12/10/98 )
300	!!
301	!! Arguments:
302	!!
303	!! nlon----input-I-nombre de points horizontaux
304	!! nlev----input-I-nombre de couches verticales, doit etre egale a klev
305	!! debut---input-L-variable logique indiquant le premier passage
306	!! lafin---input-L-variable logique indiquant le dernier passage
307	!! jD_cur -R-jour courant a l'appel de la physique (jour julien)
308	!! jH_cur -R-heure courante a l'appel de la physique (jour julien)
309	!! pdtphys-input-R-pas d'integration pour la physique (seconde)
310	!! paprs---input-R-pression pour chaque inter-couche (en Pa)
311	!! pplay---input-R-pression pour le mileu de chaque couche (en Pa)
312	!! pphi----input-R-geopotentiel de chaque couche (g z) (reference sol)
313	!! pphis---input-R-geopotentiel du sol
314	!! presnivs-input_R_pressions approximat. des milieux couches ( en PA)
315	!! u-------input-R-vitesse dans la direction X (de O a E) en m/s
316	!! v-------input-R-vitesse Y (de S a N) en m/s
317	!! t-------input-R-temperature (K)
318	!! qx------input-R-humidite specifique (kg/kg) et d'autres traceurs
319	!! d_t_dyn-input-R-tendance dynamique pour "t" (K/s)
320	!! d_q_dyn-input-R-tendance dynamique pour "q" (kg/kg/s)
321	!! d_ql_dyn-input-R-tendance dynamique pour "ql" (kg/kg/s)
322	!! d_qs_dyn-input-R-tendance dynamique pour "qs" (kg/kg/s)
323	!! flxmass_w -input-R- flux de masse verticale
324	!! d_u-----output-R-tendance physique de "u" (m/s/s)
325	!! d_v-----output-R-tendance physique de "v" (m/s/s)
326	!! d_t-----output-R-tendance physique de "t" (K/s)
327	!! d_qx----output-R-tendance physique de "qx" (kg/kg/s)
328	!! d_ps----output-R-tendance physique de la pression au sol
329	!!======================================================================
330	integer jjmp1
331	! parameter (jjmp1=jjm+1-1/jjm) ! => (jjmp1=nbp_lat-1/(nbp_lat-1))
332	! integer iip1
333	! parameter (iip1=iim+1)
334
335	include "regdim.h"
336	include "dimsoil.h"
337	include "clesphys.h"
338	include "thermcell.h"
339	include "dimpft.h"
340	!======================================================================
341	LOGICAL, SAVE :: ok_volcan ! pour activer les diagnostics volcaniques
342	!$OMP THREADPRIVATE(ok_volcan)
343	LOGICAL ok_cvl ! pour activer le nouveau driver pour convection KE
344	PARAMETER (ok_cvl=.TRUE.)
345	LOGICAL ok_gust ! pour activer l'effet des gust sur flux surface
346	PARAMETER (ok_gust=.FALSE.)
347	INTEGER, SAVE :: iflag_radia ! active ou non le rayonnement (MPL)
348	!$OMP THREADPRIVATE(iflag_radia)
349	!======================================================================
350	LOGICAL check ! Verifier la conservation du modele en eau
351	PARAMETER (check=.FALSE.)
352	LOGICAL ok_stratus ! Ajouter artificiellement les stratus
353	PARAMETER (ok_stratus=.FALSE.)
354	!======================================================================
355	REAL amn, amx
356	INTEGER igout
357	!======================================================================
358	! Clef iflag_cycle_diurne controlant l'activation du cycle diurne:
359	! en attente du codage des cles par Fred
360	! iflag_cycle_diurne est initialise par conf_phys et se trouve
361	! dans clesphys.h (IM)
362	!======================================================================
363	! Modele thermique du sol, a activer pour le cycle diurne:
364	!cc LOGICAL soil_model
365	!cc PARAMETER (soil_model=.FALSE.)
366	!======================================================================
367	! Dans les versions precedentes, l'eau liquide nuageuse utilisee dans
368	! le calcul du rayonnement est celle apres la precipitation des nuages.
369	! Si cette cle new_oliq est activee, ce sera une valeur moyenne entre
370	! la condensation et la precipitation. Cette cle augmente les impacts
371	! radiatifs des nuages.
372	!cc LOGICAL new_oliq
373	!cc PARAMETER (new_oliq=.FALSE.)
374	!======================================================================
375	! Clefs controlant deux parametrisations de l'orographie:
376	!c LOGICAL ok_orodr
377	!cc PARAMETER (ok_orodr=.FALSE.)
378	!cc LOGICAL ok_orolf
379	!cc PARAMETER (ok_orolf=.FALSE.)
380	!======================================================================
381	LOGICAL ok_journe ! sortir le fichier journalier
382	SAVE ok_journe
383	!$OMP THREADPRIVATE(ok_journe)
384	!
385	LOGICAL ok_mensuel ! sortir le fichier mensuel
386	SAVE ok_mensuel
387	!$OMP THREADPRIVATE(ok_mensuel)
388	!
389	LOGICAL ok_instan ! sortir le fichier instantane
390	SAVE ok_instan
391	!$OMP THREADPRIVATE(ok_instan)
392	!
393	LOGICAL ok_LES ! sortir le fichier LES
394	SAVE ok_LES
395	!$OMP THREADPRIVATE(ok_LES)
396	!
397	LOGICAL callstats ! sortir le fichier stats
398	SAVE callstats
399	!$OMP THREADPRIVATE(callstats)
400	!
401	LOGICAL ok_region ! sortir le fichier regional
402	PARAMETER (ok_region=.FALSE.)
403	!======================================================================
404	REAL seuil_inversion
405	SAVE seuil_inversion
406	!$OMP THREADPRIVATE(seuil_inversion)
407	INTEGER iflag_ratqs
408	SAVE iflag_ratqs
409	!$OMP THREADPRIVATE(iflag_ratqs)
410	real facteur
411
412	REAL wmax_th(klon)
413	REAL tau_overturning_th(klon)
414
415	INTEGER lmax_th(klon)
416	INTEGER limbas(klon)
417	REAL ratqscth(klon,klev)
418	REAL ratqsdiff(klon,klev)
419	REAL zqsatth(klon,klev)
420
421	!======================================================================
422	!
423	INTEGER ivap ! indice de traceurs pour vapeur d'eau
424	PARAMETER (ivap=1)
425	INTEGER iliq ! indice de traceurs pour eau liquide
426	PARAMETER (iliq=2)
427	!CR: on ajoute la phase glace
428	INTEGER isol ! indice de traceurs pour eau glace
429	PARAMETER (isol=3)
430	!
431	!
432	! Variables argument:
433	!
434	INTEGER nlon
435	INTEGER nlev
436	REAL,INTENT(IN) :: pdtphys_
437	! NB: pdtphys to be used in physics is in time_phylmdz_mod
438	LOGICAL debut, lafin
439	REAL paprs(klon,klev+1)
440	REAL pplay(klon,klev)
441	REAL pphi(klon,klev)
442	REAL pphis(klon)
443	REAL presnivs(klev)
444	!JLD REAL znivsig(klev)
445	!JLD real pir
446
447	REAL u(klon,klev)
448	REAL v(klon,klev)
449
450	REAL, intent(in):: rot(klon, klev)
451	! relative vorticity, in s-1, needed for frontal waves
452
453	REAL t(klon,klev),thetal(klon,klev)
454	! thetal: ligne suivante a decommenter si vous avez les fichiers
455	! MPL 20130625
456	! fth_fonctions.F90 et parkind1.F90
457	! sinon thetal=theta
458	! REAL fth_thetae,fth_thetav,fth_thetal
459	REAL qx(klon,klev,nqtot)
460	REAL flxmass_w(klon,klev)
461	REAL d_u(klon,klev)
462	REAL d_v(klon,klev)
463	REAL d_t(klon,klev)
464	REAL d_qx(klon,klev,nqtot)
465	REAL d_ps(klon)
466	! variables pour tend_to_tke
467	REAL duadd(klon,klev)
468	REAL dvadd(klon,klev)
469	REAL dtadd(klon,klev)
470
471	#ifndef CPP_XIOS
472	REAL, SAVE :: missing_val=nf90_fill_real
473	#endif
474	!! Variables moved to phys_local_var_mod
475	!! ! Variables pour le transport convectif
476	!! real da(klon,klev),phi(klon,klev,klev),mp(klon,klev)
477	!! real wght_cvfd(klon,klev)
478	!! ! Variables pour le lessivage convectif
479	!! ! RomP >>>
480	!! real phi2(klon,klev,klev)
481	!! real d1a(klon,klev),dam(klon,klev)
482	!! real ev(klon,klev)
483	!! real clw(klon,klev),elij(klon,klev,klev)
484	!! real epmlmMm(klon,klev,klev),eplaMm(klon,klev)
485	!! ! RomP <<<
486	!IM definition dynamique o_trac dans phys_output_open
487	! type(ctrl_out) :: o_trac(nqtot)
488
489	! variables a une pression donnee
490	!
491	include "declare_STDlev.h"
492	!
493	!
494	include "radopt.h"
495	!
496	!
497	INTEGER debug
498	INTEGER n
499	!ym INTEGER npoints
500	!ym PARAMETER(npoints=klon)
501	!
502	INTEGER nregISCtot
503	PARAMETER(nregISCtot=1)
504	!
505	! imin_debut, nbpti, jmin_debut, nbptj : parametres pour sorties
506	! sur 1 region rectangulaire y compris pour 1 point
507	! imin_debut : indice minimum de i; nbpti : nombre de points en
508	! direction i (longitude)
509	! jmin_debut : indice minimum de j; nbptj : nombre de points en
510	! direction j (latitude)
511	!JLD INTEGER imin_debut, nbpti
512	!JLD INTEGER jmin_debut, nbptj
513	!IM: region='3d' <==> sorties en global
514	CHARACTER*3 region
515	PARAMETER(region='3d')
516	LOGICAL ok_hf
517	!
518	SAVE ok_hf
519	!$OMP THREADPRIVATE(ok_hf)
520
521	INTEGER, PARAMETER :: longcles=20
522	REAL, SAVE :: clesphy0(longcles)
523	!$OMP THREADPRIVATE(clesphy0)
524	!
525	! Variables propres a la physique
526	INTEGER, SAVE :: itap ! compteur pour la physique
527	!$OMP THREADPRIVATE(itap)
528
529	INTEGER, SAVE :: abortphy=0 ! Reprere si on doit arreter en fin de phys
530	!$OMP THREADPRIVATE(abortphy)
531	!
532	REAL,SAVE :: solarlong0
533	!$OMP THREADPRIVATE(solarlong0)
534
535	!
536	! Parametres de l'Orographie a l'Echelle Sous-Maille (OESM):
537	!
538	!IM 141004 REAL zulow(klon),zvlow(klon),zustr(klon), zvstr(klon)
539	REAL zulow(klon),zvlow(klon)
540	!
541	INTEGER igwd,idx(klon),itest(klon)
542	!
543	! REAL,allocatable,save :: run_off_lic_0(:)
544	! !$OMP THREADPRIVATE(run_off_lic_0)
545	!ym SAVE run_off_lic_0
546	!KE43
547	! Variables liees a la convection de K. Emanuel (sb):
548	!
549	REAL, SAVE :: bas, top ! cloud base and top levels
550	!$OMP THREADPRIVATE(bas, top)
551	!------------------------------------------------------------------
552	! Upmost level reached by deep convection and related variable (jyg)
553	!
554	INTEGER izero
555	INTEGER k_upper_cv
556	!------------------------------------------------------------------
557	! Compteur de l'occurence de cvpas=1
558	INTEGER Ncvpaseq1
559	SAVE Ncvpaseq1
560	!$OMP THREADPRIVATE(Ncvpaseq1)
561	!
562	!==========================================================================
563	!CR04.12.07: on ajoute les nouvelles variables du nouveau schema
564	!de convection avec poches froides
565	! Variables li\'ees \`a la poche froide (jyg)
566
567	!! REAL mipsh(klon,klev) ! mass flux shed by the adiab ascent at each level
568	!! Moved to phys_state_var_mod
569	!
570	REAL wape_prescr, fip_prescr
571	INTEGER it_wape_prescr
572	SAVE wape_prescr, fip_prescr, it_wape_prescr
573	!$OMP THREADPRIVATE(wape_prescr, fip_prescr, it_wape_prescr)
574	!
575	! variables supplementaires de concvl
576	REAL Tconv(klon,klev)
577	!! variable moved to phys_local_var_mod
578	!! REAL sij(klon,klev,klev)
579	!! !
580	!! ! variables pour tester la conservation de l'energie dans concvl
581	!! REAL, DIMENSION(klon,klev) :: d_t_con_sat
582	!! REAL, DIMENSION(klon,klev) :: d_q_con_sat
583	!! REAL, DIMENSION(klon,klev) :: dql_sat
584
585	REAL, SAVE :: alp_bl_prescr=0.
586	REAL, SAVE :: ale_bl_prescr=0.
587	REAL, SAVE :: wake_s_min_lsp=0.1
588	!$OMP THREADPRIVATE(alp_bl_prescr,ale_bl_prescr)
589	!$OMP THREADPRIVATE(wake_s_min_lsp)
590
591	REAL ok_wk_lsp(klon)
592
593	!RC
594	! Variables li\'ees \`a la poche froide (jyg et rr)
595
596	INTEGER, SAVE :: iflag_wake_tend ! wake: if =0, then wake state variables are
597	! updated within calwake
598	!$OMP THREADPRIVATE(iflag_wake_tend)
599	INTEGER, SAVE :: iflag_alp_wk_cond=0 ! wake: if =0, then Alp_wk is the average lifting
600	! power provided by the wakes; else, Alp_wk is the
601	! lifting power conditionned on the presence of a
602	! gust-front in the grid cell.
603	!$OMP THREADPRIVATE(iflag_alp_wk_cond)
604
605	INTEGER, SAVE :: iflag_bug_t2m_ipslcm61=1 !
606	!$OMP THREADPRIVATE(iflag_bug_t2m_ipslcm61)
607	INTEGER, SAVE :: iflag_bug_t2m_stab_ipslcm61=-1 !
608	!$OMP THREADPRIVATE(iflag_bug_t2m_stab_ipslcm61)
609
610	REAL t_w(klon,klev),q_w(klon,klev) ! temperature and moisture profiles in the wake region
611	REAL t_x(klon,klev),q_x(klon,klev) ! temperature and moisture profiles in the off-wake region
612
613	REAL wake_dth(klon,klev) ! wake : temp pot difference
614
615	REAL wake_omgbdth(klon,klev) ! Wake : flux of Delta_Theta
616	! transported by LS omega
617	REAL wake_dp_omgb(klon,klev) ! Wake : vertical gradient of
618	! large scale omega
619	REAL wake_dtKE(klon,klev) ! Wake : differential heating
620	! (wake - unpertubed) CONV
621	REAL wake_dqKE(klon,klev) ! Wake : differential moistening
622	! (wake - unpertubed) CONV
623	REAL wake_dp_deltomg(klon,klev) ! Wake : gradient vertical de wake_omg
624	REAL wake_spread(klon,klev) ! spreading term in wake_delt
625	!
626	!pourquoi y'a pas de save??
627	!
628	!!! INTEGER, SAVE, DIMENSION(klon) :: wake_k
629	!!! !$OMP THREADPRIVATE(wake_k)
630	!
631	!jyg<
632	!cc REAL wake_pe(klon) ! Wake potential energy - WAPE
633	!>jyg
634
635	REAL wake_fip_0(klon) ! Average Front Incoming Power (unconditionned)
636	REAL wake_gfl(klon) ! Gust Front Length
637	!!! REAL wake_dens(klon) ! moved to phys_state_var_mod
638	!
639	!
640	REAL dt_dwn(klon,klev)
641	REAL dq_dwn(klon,klev)
642	REAL M_dwn(klon,klev)
643	REAL M_up(klon,klev)
644	REAL dt_a(klon,klev)
645	REAL dq_a(klon,klev)
646	REAL d_t_adjwk(klon,klev) !jyg
647	REAL d_q_adjwk(klon,klev) !jyg
648	LOGICAL,SAVE :: ok_adjwk=.FALSE.
649	!$OMP THREADPRIVATE(ok_adjwk)
650	INTEGER,SAVE :: iflag_adjwk=0 !jyg
651	!$OMP THREADPRIVATE(iflag_adjwk) !jyg
652	REAL,SAVE :: oliqmax=999.,oicemax=999.
653	!$OMP THREADPRIVATE(oliqmax,oicemax)
654	REAL, SAVE :: alp_offset
655	!$OMP THREADPRIVATE(alp_offset)
656	REAL, SAVE :: dtcon_multistep_max=1.e6
657	!$OMP THREADPRIVATE(dtcon_multistep_max)
658	REAL, SAVE :: dqcon_multistep_max=1.e6
659	!$OMP THREADPRIVATE(dqcon_multistep_max)
660
661
662	!
663	!RR:fin declarations poches froides
664	!==========================================================================
665
666	REAL ztv(klon,klev),ztva(klon,klev)
667	REAL zpspsk(klon,klev)
668	REAL ztla(klon,klev),zqla(klon,klev)
669	REAL zthl(klon,klev)
670
671	!cc nrlmd le 10/04/2012
672
673	!--------Stochastic Boundary Layer Triggering: ALE_BL--------
674	!---Propri\'et\'es du thermiques au LCL
675	real zlcl_th(klon) ! Altitude du LCL calcul\'e
676	! continument (pcon dans
677	! thermcell_main.F90)
678	real fraca0(klon) ! Fraction des thermiques au LCL
679	real w0(klon) ! Vitesse des thermiques au LCL
680	real w_conv(klon) ! Vitesse verticale de grande \'echelle au LCL
681	real tke0(klon,klev+1) ! TKE au d\'ebut du pas de temps
682	real therm_tke_max0(klon) ! TKE dans les thermiques au LCL
683	real env_tke_max0(klon) ! TKE dans l'environnement au LCL
684
685	!JLD !---D\'eclenchement stochastique
686	!JLD integer :: tau_trig(klon)
687
688	REAL,SAVE :: random_notrig_max=1.
689	!$OMP THREADPRIVATE(random_notrig_max)
690
691	!--------Statistical Boundary Layer Closure: ALP_BL--------
692	!---Profils de TKE dans et hors du thermique
693	real therm_tke_max(klon,klev) ! Profil de TKE dans les thermiques
694	real env_tke_max(klon,klev) ! Profil de TKE dans l'environnement
695
696	!-------Activer les tendances de TKE due a l'orograp??ie---------
697	INTEGER, SAVE :: addtkeoro
698	!$OMP THREADPRIVATE(addtkeoro)
699	REAL, SAVE :: alphatkeoro
700	!$OMP THREADPRIVATE(alphatkeoro)
701	LOGICAL, SAVE :: smallscales_tkeoro
702	!$OMP THREADPRIVATE(smallscales_tkeoro)
703
704
705
706	!cc fin nrlmd le 10/04/2012
707
708	! Variables locales pour la couche limite (al1):
709	!
710	!Al1 REAL pblh(klon) ! Hauteur de couche limite
711	!Al1 SAVE pblh
712	!34EK
713	!
714	! Variables locales:
715	!
716	!AA
717	!AA Pour phytrac
718	REAL u1(klon) ! vents dans la premiere couche U
719	REAL v1(klon) ! vents dans la premiere couche V
720
721	!@$$ LOGICAL offline ! Controle du stockage ds "physique"
722	!@$$ PARAMETER (offline=.false.)
723	!@$$ INTEGER physid
724	REAL frac_impa(klon,klev) ! fractions d'aerosols lessivees (impaction)
725	REAL frac_nucl(klon,klev) ! idem (nucleation)
726	! RomP >>>
727	REAL beta_prec_fisrt(klon,klev) ! taux de conv de l'eau cond (fisrt)
728	! RomP <<<
729	REAL :: calday
730
731	!IM cf FH pour Tiedtke 080604
732	REAL rain_tiedtke(klon),snow_tiedtke(klon)
733	!
734	!IM 050204 END
735	REAL devap(klon) ! evaporation et sa derivee
736	REAL dsens(klon) ! chaleur sensible et sa derivee
737
738	!
739	! Conditions aux limites
740	!
741	!
742	REAL :: day_since_equinox
743	! Date de l'equinoxe de printemps
744	INTEGER, parameter :: mth_eq=3, day_eq=21
745	REAL :: jD_eq
746
747	LOGICAL, parameter :: new_orbit = .TRUE.
748
749	!
750	INTEGER lmt_pas
751	SAVE lmt_pas ! frequence de mise a jour
752	!$OMP THREADPRIVATE(lmt_pas)
753	real zmasse(klon, nbp_lev),exner(klon, nbp_lev)
754	! (column-density of mass of air in a cell, in kg m-2)
755	real, parameter:: dobson_u = 2.1415e-05 ! Dobson unit, in kg m-2
756
757	!IM sorties
758	REAL un_jour
759	PARAMETER(un_jour=86400.)
760	INTEGER itapm1 !pas de temps de la physique du(es) mois precedents
761	SAVE itapm1 !mis a jour le dernier pas de temps du mois en cours
762	!$OMP THREADPRIVATE(itapm1)
763	!======================================================================
764	!
765	! Declaration des procedures appelees
766	!
767	EXTERNAL angle ! calculer angle zenithal du soleil
768	EXTERNAL alboc ! calculer l'albedo sur ocean
769	EXTERNAL ajsec ! ajustement sec
770	EXTERNAL conlmd ! convection (schema LMD)
771	!KE43
772	EXTERNAL conema3 ! convect4.3
773	EXTERNAL fisrtilp ! schema de condensation a grande echelle (pluie)
774	!AA
775	! JBM (3/14) fisrtilp_tr not loaded
776	! EXTERNAL fisrtilp_tr ! schema de condensation a grande echelle (pluie)
777	! ! stockage des coefficients necessaires au
778	! ! lessivage OFF-LINE et ON-LINE
779	EXTERNAL hgardfou ! verifier les temperatures
780	EXTERNAL nuage ! calculer les proprietes radiatives
781	!C EXTERNAL o3cm ! initialiser l'ozone
782	EXTERNAL orbite ! calculer l'orbite terrestre
783	EXTERNAL phyetat0 ! lire l'etat initial de la physique
784	EXTERNAL phyredem ! ecrire l'etat de redemarrage de la physique
785	EXTERNAL suphel ! initialiser certaines constantes
786	EXTERNAL transp ! transport total de l'eau et de l'energie
787	!IM
788	EXTERNAL haut2bas !variables de haut en bas
789	EXTERNAL ini_undefSTD !initialise a 0 une variable a 1 niveau de pression
790	EXTERNAL undefSTD !somme les valeurs definies d'1 var a 1 niveau de pression
791	! EXTERNAL moy_undefSTD !moyenne d'1 var a 1 niveau de pression
792	! EXTERNAL moyglo_aire
793	! moyenne globale d'1 var ponderee par l'aire de la maille (moyglo_pondaire)
794	! par la masse/airetot (moyglo_pondaima) et la vraie masse (moyglo_pondmass)
795	!
796	!
797	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
798	! Local variables
799	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
800	!
801	REAL rhcl(klon,klev) ! humiditi relative ciel clair
802	REAL dialiq(klon,klev) ! eau liquide nuageuse
803	REAL diafra(klon,klev) ! fraction nuageuse
804	REAL cldliq(klon,klev) ! eau liquide nuageuse
805	!
806	!XXX PB
807	REAL fluxq(klon,klev, nbsrf) ! flux turbulent d'humidite
808	!
809	REAL zxfluxt(klon, klev)
810	REAL zxfluxq(klon, klev)
811	REAL zxfluxu(klon, klev)
812	REAL zxfluxv(klon, klev)
813
814	! Le rayonnement n'est pas calcule tous les pas, il faut donc
815	! sauvegarder les sorties du rayonnement
816	!ym SAVE heat,cool,albpla,topsw,toplw,solsw,sollw,sollwdown
817	!ym SAVE sollwdownclr, toplwdown, toplwdownclr
818	!ym SAVE topsw0,toplw0,solsw0,sollw0, heat0, cool0
819	!
820	INTEGER itaprad
821	SAVE itaprad
822	!$OMP THREADPRIVATE(itaprad)
823	!
824	REAL conv_q(klon,klev) ! convergence de l'humidite (kg/kg/s)
825	REAL conv_t(klon,klev) ! convergence de la temperature(K/s)
826	!
827	#ifdef INCA
828	REAL zxsnow_dummy(klon)
829	#endif
830	REAL zsav_tsol(klon)
831	!
832	REAL dist, rmu0(klon), fract(klon)
833	REAL zrmu0(klon), zfract(klon)
834	REAL zdtime, zdtime1, zdtime2, zlongi
835	!
836	REAL qcheck
837	REAL z_avant(klon), z_apres(klon), z_factor(klon)
838	LOGICAL zx_ajustq
839	!
840	REAL za
841	REAL zx_t, zx_qs, zdelta, zcor
842	real zqsat(klon,klev)
843	!
844	INTEGER i, k, iq, j, nsrf, ll, l
845	!
846	REAL t_coup
847	PARAMETER (t_coup=234.0)
848
849	!ym A voir plus tard !!
850	!ym REAL zx_relief(iim,jjmp1)
851	!ym REAL zx_aire(iim,jjmp1)
852	!
853	! Grandeurs de sorties
854	REAL s_capCL(klon)
855	REAL s_oliqCL(klon), s_cteiCL(klon)
856	REAL s_trmb1(klon), s_trmb2(klon)
857	REAL s_trmb3(klon)
858
859	! La convection n'est pas calculee tous les pas, il faut donc
860	! sauvegarder les sorties de la convection
861	!ym SAVE
862	!ym SAVE
863	!ym SAVE
864	!
865	INTEGER itapcv, itapwk
866	SAVE itapcv, itapwk
867	!$OMP THREADPRIVATE(itapcv, itapwk)
868
869	!KE43
870	! Variables locales pour la convection de K. Emanuel (sb):
871
872	REAL tvp(klon,klev) ! virtual temp of lifted parcel
873	CHARACTER*40 capemaxcels !max(CAPE)
874
875	REAL rflag(klon) ! flag fonctionnement de convect
876	INTEGER iflagctrl(klon) ! flag fonctionnement de convect
877
878	! -- convect43:
879	INTEGER ntra ! nb traceurs pour convect4.3
880	REAL dtvpdt1(klon,klev), dtvpdq1(klon,klev)
881	REAL dplcldt(klon), dplcldr(klon)
882	!? . condm_con(klon,klev),conda_con(klon,klev),
883	!? . mr_con(klon,klev),ep_con(klon,klev)
884	!? . ,sadiab(klon,klev),wadiab(klon,klev)
885	! --
886	!34EK
887	!
888	! Variables du changement
889	!
890	! con: convection
891	! lsc: condensation a grande echelle (Large-Scale-Condensation)
892	! ajs: ajustement sec
893	! eva: evaporation de l'eau liquide nuageuse
894	! vdf: couche limite (Vertical DiFfusion)
895	!
896	! tendance nulles
897	REAL, dimension(klon,klev):: du0, dv0, dt0, dq0, dql0, dqi0
898	REAL, dimension(klon) :: dsig0, ddens0
899	INTEGER, dimension(klon) :: wkoccur1
900	! tendance buffer pour appel de add_phys_tend
901	REAL, DIMENSION(klon,klev) :: d_q_ch4_dtime
902	!
903	! Flag pour pouvoir ne pas ajouter les tendances.
904	! Par defaut, les tendances doivente etre ajoutees et
905	! flag_inhib_tend = 0
906	! flag_inhib_tend > 0 : tendances non ajoutees, avec un nombre
907	! croissant de print quand la valeur du flag augmente
908	!!! attention, ce flag doit etre change avec prudence !!!
909	INTEGER :: flag_inhib_tend = 0 ! 0 is the default value
910	!! INTEGER :: flag_inhib_tend = 2
911	!
912	! Logical switch to a bug : reseting to 0 convective variables at the
913	! begining of physiq.
914	LOGICAL, SAVE :: ok_bug_cv_trac = .TRUE.
915	!$OMP THREADPRIVATE(ok_bug_cv_trac)
916	!
917	! Logical switch to a bug : changing wake_deltat when thermals are active
918	! even when there are no wakes.
919	LOGICAL, SAVE :: ok_bug_split_th = .TRUE.
920	!$OMP THREADPRIVATE(ok_bug_split_th)
921
922	!
923	!********************************************************
924	! declarations
925
926	!********************************************************
927	!IM 081204 END
928	!
929	REAL pen_u(klon,klev), pen_d(klon,klev)
930	REAL pde_u(klon,klev), pde_d(klon,klev)
931	INTEGER kcbot(klon), kctop(klon), kdtop(klon)
932	!
933	REAL ratqsbas,ratqshaut,tau_ratqs
934	SAVE ratqsbas,ratqshaut,tau_ratqs
935	!$OMP THREADPRIVATE(ratqsbas,ratqshaut,tau_ratqs)
936	REAL, SAVE :: ratqsp0=50000., ratqsdp=20000.
937	!$OMP THREADPRIVATE(ratqsp0, ratqsdp)
938
939	! Parametres lies au nouveau schema de nuages (SB, PDF)
940	REAL, SAVE :: fact_cldcon
941	REAL, SAVE :: facttemps
942	!$OMP THREADPRIVATE(fact_cldcon,facttemps)
943	LOGICAL, SAVE :: ok_newmicro
944	!$OMP THREADPRIVATE(ok_newmicro)
945
946	INTEGER, SAVE :: iflag_cld_th
947	!$OMP THREADPRIVATE(iflag_cld_th)
948	!IM logical ptconv(klon,klev) !passe dans phys_local_var_mod
949	!IM cf. AM 081204 BEG
950	LOGICAL ptconvth(klon,klev)
951	!IM cf. AM 081204 END
952	!
953	! Variables liees a l'ecriture de la bande histoire physique
954	!
955	!======================================================================
956	!
957	!
958	!JLD integer itau_w ! pas de temps ecriture = itap + itau_phy
959	!
960	!
961	! Variables locales pour effectuer les appels en serie
962	!
963	!IM RH a 2m (la surface)
964	REAL Lheat
965
966	INTEGER length
967	PARAMETER ( length = 100 )
968	REAL tabcntr0( length )
969	!
970	!JLD INTEGER ndex2d(nbp_lon*nbp_lat)
971	!IM
972	!
973	!IM AMIP2 BEG
974	!JLD REAL moyglo, mountor
975	!IM 141004 BEG
976	REAL zustrdr(klon), zvstrdr(klon)
977	REAL zustrli(klon), zvstrli(klon)
978	REAL zustrph(klon), zvstrph(klon)
979	REAL aam, torsfc
980	!IM 141004 END
981	!IM 190504 BEG
982	! INTEGER imp1jmp1
983	! PARAMETER(imp1jmp1=(iim+1)*jjmp1)
984	!ym A voir plus tard
985	! REAL zx_tmp((nbp_lon+1)*nbp_lat)
986	! REAL airedyn(nbp_lon+1,nbp_lat)
987	!IM 190504 END
988	!JLD LOGICAL ok_msk
989	!JLD REAL msk(klon)
990	!ym A voir plus tard
991	!ym REAL zm_wo(jjmp1, klev)
992	!IM AMIP2 END
993	!
994	REAL zx_tmp_fi2d(klon) ! variable temporaire grille physique
995	REAL zx_tmp_fi3d(klon,klev) ! variable temporaire pour champs 3D
996	!JLD REAL zx_tmp_2d(nbp_lon,nbp_lat)
997	!JLD REAL zx_lon(nbp_lon,nbp_lat)
998	!JLD REAL zx_lat(nbp_lon,nbp_lat)
999	!
1000	INTEGER nid_ctesGCM
1001	SAVE nid_ctesGCM
1002	!$OMP THREADPRIVATE(nid_ctesGCM)
1003	!
1004	!IM 280405 BEG
1005	! INTEGER nid_bilKPins, nid_bilKPave
1006	! SAVE nid_bilKPins, nid_bilKPave
1007	! !$OMP THREADPRIVATE(nid_bilKPins, nid_bilKPave)
1008	!
1009	REAL ve_lay(klon,klev) ! transport meri. de l'energie a chaque niveau vert.
1010	REAL vq_lay(klon,klev) ! transport meri. de l'eau a chaque niveau vert.
1011	REAL ue_lay(klon,klev) ! transport zonal de l'energie a chaque niveau vert.
1012	REAL uq_lay(klon,klev) ! transport zonal de l'eau a chaque niveau vert.
1013	!
1014	!JLD REAL zjulian
1015	!JLD SAVE zjulian
1016	!JLD!$OMP THREADPRIVATE(zjulian)
1017
1018	!JLD INTEGER nhori, nvert
1019	!JLD REAL zsto
1020	!JLD REAL zstophy, zout
1021
1022	CHARACTER*20 modname
1023	CHARACTER*80 abort_message
1024	LOGICAL, SAVE :: ok_sync, ok_sync_omp
1025	!$OMP THREADPRIVATE(ok_sync)
1026	REAL date0
1027
1028	! essai writephys
1029	INTEGER fid_day, fid_mth, fid_ins
1030	PARAMETER (fid_ins = 1, fid_day = 2, fid_mth = 3)
1031	INTEGER prof2d_on, prof3d_on, prof2d_av, prof3d_av
1032	PARAMETER (prof2d_on = 1, prof3d_on = 2, prof2d_av = 3, prof3d_av = 4)
1033	REAL ztsol(klon)
1034	REAL q2m(klon,nbsrf) ! humidite a 2m
1035
1036	!IM: t2m, q2m, ustar, u10m, v10m et t2mincels, t2maxcels
1037	CHARACTER*40 t2mincels, t2maxcels !t2m min., t2m max
1038	CHARACTER*40 tinst, tave
1039	REAL cldtaupi(klon,klev) ! Cloud optical thickness for
1040	! pre-industrial (pi) aerosols
1041
1042	INTEGER :: naero
1043	! Aerosol optical properties
1044	CHARACTER*4, DIMENSION(naero_grp) :: rfname
1045	REAL, DIMENSION(klon,klev) :: mass_solu_aero ! total mass
1046	! concentration
1047	! for all soluble
1048	! aerosols[ug/m3]
1049	REAL, DIMENSION(klon,klev) :: mass_solu_aero_pi
1050	! - " - (pre-industrial value)
1051
1052	! Parameters
1053	LOGICAL ok_ade, ok_aie ! Apply aerosol (in)direct effects or not
1054	LOGICAL ok_alw ! Apply aerosol LW effect or not
1055	LOGICAL ok_cdnc ! ok cloud droplet number concentration (O. Boucher 01-2013)
1056	REAL bl95_b0, bl95_b1 ! Parameter in Boucher and Lohmann (1995)
1057	SAVE ok_ade, ok_aie, ok_alw, ok_cdnc, bl95_b0, bl95_b1
1058	!$OMP THREADPRIVATE(ok_ade, ok_aie, ok_alw, ok_cdnc, bl95_b0, bl95_b1)
1059	LOGICAL, SAVE :: aerosol_couple ! true : calcul des aerosols dans INCA
1060	! false : lecture des aerosol dans un fichier
1061	!$OMP THREADPRIVATE(aerosol_couple)
1062	LOGICAL, SAVE :: chemistry_couple ! true : use INCA chemistry O3
1063	! false : use offline chemistry O3
1064	!$OMP THREADPRIVATE(chemistry_couple)
1065	INTEGER, SAVE :: flag_aerosol
1066	!$OMP THREADPRIVATE(flag_aerosol)
1067	LOGICAL, SAVE :: flag_bc_internal_mixture
1068	!$OMP THREADPRIVATE(flag_bc_internal_mixture)
1069	!
1070	!--STRAT AEROSOL
1071	INTEGER, SAVE :: flag_aerosol_strat
1072	!$OMP THREADPRIVATE(flag_aerosol_strat)
1073	!
1074	!--INTERACTIVE AEROSOL FEEDBACK ON RADIATION
1075	LOGICAL, SAVE :: flag_aer_feedback
1076	!$OMP THREADPRIVATE(flag_aer_feedback)
1077
1078	!c-fin STRAT AEROSOL
1079	!
1080	! Declaration des constantes et des fonctions thermodynamiques
1081	!
1082	LOGICAL,SAVE :: first=.TRUE.
1083	!$OMP THREADPRIVATE(first)
1084
1085	! VARIABLES RELATED TO OZONE CLIMATOLOGIES ; all are OpenMP shared
1086	! Note that pressure vectors are in Pa and in stricly ascending order
1087	INTEGER,SAVE :: read_climoz ! Read ozone climatology
1088	! (let it keep the default OpenMP shared attribute)
1089	! Allowed values are 0, 1 and 2
1090	! 0: do not read an ozone climatology
1091	! 1: read a single ozone climatology that will be used day and night
1092	! 2: read two ozone climatologies, the average day and night
1093	! climatology and the daylight climatology
1094	INTEGER,SAVE :: ncid_climoz ! NetCDF file identifier
1095	REAL, POINTER, SAVE :: press_cen_climoz(:) ! Pressure levels
1096	REAL, POINTER, SAVE :: press_edg_climoz(:) ! Edges of pressure intervals
1097	REAL, POINTER, SAVE :: time_climoz(:) ! Time vector
1098	CHARACTER(LEN=13), PARAMETER :: vars_climoz(2) &
1099	= ["tro3 ","tro3_daylight"]
1100	! vars_climoz(1:read_climoz): variables names in climoz file.
1101	! vars_climoz(1:read_climoz-2) if read_climoz>2 (temporary)
1102	REAL :: ro3i ! 0<=ro3i<=360 ; required time index in NetCDF file for
1103	! the ozone fields, old method.
1104
1105	include "YOMCST.h"
1106	include "YOETHF.h"
1107	include "FCTTRE.h"
1108	!IM 100106 BEG : pouvoir sortir les ctes de la physique
1109	include "conema3.h"
1110	include "fisrtilp.h"
1111	include "nuage.h"
1112	include "compbl.h"
1113	!IM 100106 END : pouvoir sortir les ctes de la physique
1114	!
1115	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1116	! Declarations pour Simulateur COSP
1117	!============================================================
1118	real :: mr_ozone(klon,klev), phicosp(klon,klev)
1119
1120	!IM stations CFMIP
1121	INTEGER, SAVE :: nCFMIP
1122	!$OMP THREADPRIVATE(nCFMIP)
1123	INTEGER, PARAMETER :: npCFMIP=120
1124	INTEGER, ALLOCATABLE, SAVE :: tabCFMIP(:)
1125	REAL, ALLOCATABLE, SAVE :: lonCFMIP(:), latCFMIP(:)
1126	!$OMP THREADPRIVATE(tabCFMIP, lonCFMIP, latCFMIP)
1127	INTEGER, ALLOCATABLE, SAVE :: tabijGCM(:)
1128	REAL, ALLOCATABLE, SAVE :: lonGCM(:), latGCM(:)
1129	!$OMP THREADPRIVATE(tabijGCM, lonGCM, latGCM)
1130	INTEGER, ALLOCATABLE, SAVE :: iGCM(:), jGCM(:)
1131	!$OMP THREADPRIVATE(iGCM, jGCM)
1132	logical, dimension(nfiles) :: phys_out_filestations
1133	logical, parameter :: lNMC=.FALSE.
1134
1135	!IM betaCRF
1136	REAL, SAVE :: pfree, beta_pbl, beta_free
1137	!$OMP THREADPRIVATE(pfree, beta_pbl, beta_free)
1138	REAL, SAVE :: lon1_beta, lon2_beta, lat1_beta, lat2_beta
1139	!$OMP THREADPRIVATE(lon1_beta, lon2_beta, lat1_beta, lat2_beta)
1140	LOGICAL, SAVE :: mskocean_beta
1141	!$OMP THREADPRIVATE(mskocean_beta)
1142	REAL, dimension(klon, klev) :: beta ! facteur sur cldtaurad et
1143	! cldemirad pour evaluer les
1144	! retros liees aux CRF
1145	REAL, dimension(klon, klev) :: cldtaurad ! epaisseur optique
1146	! pour radlwsw pour
1147	! tester "CRF off"
1148	REAL, dimension(klon, klev) :: cldtaupirad ! epaisseur optique
1149	! pour radlwsw pour
1150	! tester "CRF off"
1151	REAL, dimension(klon, klev) :: cldemirad ! emissivite pour
1152	! radlwsw pour tester
1153	! "CRF off"
1154	REAL, dimension(klon, klev) :: cldfrarad ! fraction nuageuse
1155
1156	#ifdef INCA
1157	! set de variables utilisees pour l'initialisation des valeurs provenant de INCA
1158	REAL, DIMENSION(klon,klev,naero_grp,nbands) :: init_tauinca
1159	REAL, DIMENSION(klon,klev,naero_grp,nbands) :: init_pizinca
1160	REAL, DIMENSION(klon,klev,naero_grp,nbands) :: init_cginca
1161	REAL, DIMENSION(klon,klev,nbands) :: init_ccminca
1162	#endif
1163	REAL, DIMENSION(klon,nbtr) :: init_source
1164
1165	!lwoff=y : offset LW CRE for radiation code and other schemes
1166	REAL, SAVE :: betalwoff
1167	!OMP THREADPRIVATE(betalwoff)
1168	!
1169	INTEGER :: nbtr_tmp ! Number of tracer inside concvl
1170	REAL, dimension(klon,klev) :: sh_in ! Specific humidity entering in phytrac
1171	REAL, dimension(klon,klev) :: ch_in ! Condensed humidity entering in phytrac (eau liquide)
1172	integer iostat
1173
1174	REAL zzz
1175	!albedo SB >>>
1176	REAL,DIMENSION(6), SAVE :: SFRWL
1177	!$OMP THREADPRIVATE(SFRWL)
1178	!albedo SB <<<
1179
1180	!--OB variables for mass fixer (hard coded for now)
1181	LOGICAL, PARAMETER :: mass_fixer=.FALSE.
1182	REAL qql1(klon),qql2(klon),corrqql
1183
1184	REAL pi
1185
1186	pi = 4. * ATAN(1.)
1187
1188	! Ehouarn: set value of jjmp1 since it is no longer a "fixed parameter"
1189	jjmp1=nbp_lat
1190
1191	!======================================================================
1192	! Gestion calendrier : mise a jour du module phys_cal_mod
1193	!
1194	pdtphys=pdtphys_
1195	CALL update_time(pdtphys)
1196	phys_tstep=NINT(pdtphys)
1197	#ifdef CPP_XIOS
1198	IF (.NOT. debut .AND. is_omp_master) CALL xios_update_calendar(itap+1)
1199	#endif
1200
1201	!======================================================================
1202	! Ecriture eventuelle d'un profil verticale en entree de la physique.
1203	! Utilise notamment en 1D mais peut etre active egalement en 3D
1204	! en imposant la valeur de igout.
1205	!======================================================================d
1206	IF (prt_level.ge.1) THEN
1207	igout=klon/2+1/klon
1208	write(lunout,*) 'DEBUT DE PHYSIQ !!!!!!!!!!!!!!!!!!!!'
1209	write(lunout,*) 'igout, lat, lon ',igout, latitude_deg(igout), &
1210	longitude_deg(igout)
1211	write(lunout,*) &
1212	'nlon,klev,nqtot,debut,lafin, jD_cur, jH_cur,pdtphys'
1213	write(lunout,*) &
1214	nlon,klev,nqtot,debut,lafin, jD_cur, jH_cur,pdtphys
1215
1216	write(lunout,*) 'paprs, play, phi, u, v, t'
1217	DO k=1,klev
1218	write(lunout,*) paprs(igout,k),pplay(igout,k),pphi(igout,k), &
1219	u(igout,k),v(igout,k),t(igout,k)
1220	ENDDO
1221	write(lunout,*) 'ovap (g/kg), oliq (g/kg)'
1222	DO k=1,klev
1223	write(lunout,) qx(igout,k,1)1000,qx(igout,k,2)*1000.
1224	ENDDO
1225	ENDIF
1226
1227	! Quick check on pressure levels:
1228	CALL assert(paprs(:, nbp_lev + 1) < paprs(:, nbp_lev), &
1229	"physiq_mod paprs bad order")
1230
1231	IF (first) THEN
1232	CALL init_etat0_limit_unstruct
1233	IF (.NOT. create_etat0_limit) CALL init_limit_read(days_elapsed)
1234	!CR:nvelles variables convection/poches froides
1235
1236	WRITE(lunout,*) '================================================='
1237	WRITE(lunout,*) 'Allocation des variables locales et sauvegardees'
1238	WRITE(lunout,*) '================================================='
1239	CALL phys_local_var_init
1240	!
1241	! appel a la lecture du run.def physique
1242	CALL conf_phys(ok_journe, ok_mensuel, &
1243	ok_instan, ok_hf, &
1244	ok_LES, &
1245	callstats, &
1246	solarlong0,seuil_inversion, &
1247	fact_cldcon, facttemps,ok_newmicro,iflag_radia, &
1248	iflag_cld_th,iflag_ratqs,ratqsbas,ratqshaut,tau_ratqs, &
1249	ok_ade, ok_aie, ok_alw, ok_cdnc, ok_volcan, aerosol_couple, &
1250	chemistry_couple, &
1251	flag_aerosol, flag_aerosol_strat, flag_aer_feedback, &
1252	flag_bc_internal_mixture, bl95_b0, bl95_b1, &
1253	! nv flags pour la convection et les
1254	! poches froides
1255	read_climoz, &
1256	alp_offset)
1257	CALL phys_state_var_init(read_climoz)
1258	CALL phys_output_var_init
1259	IF (read_climoz>=1 .AND. create_etat0_limit .AND. grid_type==unstructured) &
1260	CALL regr_horiz_time_climoz(read_climoz,ok_daily_climoz)
1261
1262	#ifdef CPP_StratAer
1263	CALL strataer_init
1264	#endif
1265
1266	print*, '================================================='
1267	!
1268	!CR: check sur le nb de traceurs de l eau
1269	IF ((iflag_ice_thermo.gt.0).and.(nqo==2)) THEN
1270	WRITE (lunout, *) ' iflag_ice_thermo==1 requires 3 H2O tracers ', &
1271	'(H2Ov, H2Ol, H2Oi) but nqo=', nqo, '. Might as well stop here.'
1272	abort_message='see above'
1273	CALL abort_physic(modname,abort_message,1)
1274	ENDIF
1275
1276	Ncvpaseq1 = 0
1277	dnwd0=0.0
1278	ftd=0.0
1279	fqd=0.0
1280	cin=0.
1281	!ym Attention pbase pas initialise dans concvl !!!!
1282	pbase=0
1283	!IM 180608
1284
1285	itau_con=0
1286	first=.FALSE.
1287
1288	ENDIF ! first
1289
1290	!ym => necessaire pour iflag_con != 2
1291	pmfd(:,:) = 0.
1292	pen_u(:,:) = 0.
1293	pen_d(:,:) = 0.
1294	pde_d(:,:) = 0.
1295	pde_u(:,:) = 0.
1296	aam=0.
1297	d_t_adjwk(:,:)=0
1298	d_q_adjwk(:,:)=0
1299
1300	alp_bl_conv(:)=0.
1301
1302	torsfc=0.
1303	forall (k=1: nbp_lev) zmasse(:, k) = (paprs(:, k)-paprs(:, k+1)) / rg
1304
1305	modname = 'physiq'
1306
1307	IF (debut) THEN
1308	CALL suphel ! initialiser constantes et parametres phys.
1309	! tau_gl : constante de rappel de la temperature a la surface de la glace - en
1310	tau_gl=5.
1311	CALL getin_p('tau_gl', tau_gl)
1312	! tau_gl : constante de rappel de la temperature a la surface de la glace - en
1313	! secondes
1314	tau_gl=86400.*tau_gl
1315	WRITE(lunout,*) 'debut physiq_mod tau_gl=',tau_gl
1316
1317	iflag_bug_t2m_ipslcm61 = 1
1318	CALL getin_p('iflag_bug_t2m_ipslcm61', iflag_bug_t2m_ipslcm61)
1319	iflag_bug_t2m_stab_ipslcm61 = -1
1320	CALL getin_p('iflag_bug_t2m_stab_ipslcm61', iflag_bug_t2m_stab_ipslcm61)
1321
1322	CALL getin_p('iflag_alp_wk_cond', iflag_alp_wk_cond)
1323	CALL getin_p('random_notrig_max',random_notrig_max)
1324	CALL getin_p('ok_adjwk',ok_adjwk)
1325	IF (ok_adjwk) iflag_adjwk=2 ! for compatibility with older versions
1326	! iflag_adjwk: ! 0 = Default: no convective adjustment of w-region
1327	! 1 => convective adjustment but state variables are unchanged
1328	! 2 => convective adjustment and state variables are changed
1329	CALL getin_p('iflag_adjwk',iflag_adjwk)
1330	CALL getin_p('dtcon_multistep_max',dtcon_multistep_max)
1331	CALL getin_p('dqcon_multistep_max',dqcon_multistep_max)
1332	CALL getin_p('oliqmax',oliqmax)
1333	CALL getin_p('oicemax',oicemax)
1334	CALL getin_p('ratqsp0',ratqsp0)
1335	CALL getin_p('ratqsdp',ratqsdp)
1336	iflag_wake_tend = 0
1337	CALL getin_p('iflag_wake_tend',iflag_wake_tend)
1338	ok_bad_ecmwf_thermo=.TRUE. ! By default thermodynamical constants are set
1339	! in rrtm/suphec.F90 (and rvtmp2 is set to 0).
1340	CALL getin_p('ok_bad_ecmwf_thermo',ok_bad_ecmwf_thermo)
1341	CALL getin_p('ok_bug_cv_trac',ok_bug_cv_trac)
1342	CALL getin_p('ok_bug_split_th',ok_bug_split_th)
1343	fl_ebil = 0 ! by default, conservation diagnostics are desactivated
1344	CALL getin_p('fl_ebil',fl_ebil)
1345	fl_cor_ebil = 0 ! by default, no correction to ensure energy conservation
1346	CALL getin_p('fl_cor_ebil',fl_cor_ebil)
1347	iflag_phytrac = 1 ! by default we do want to call phytrac
1348	CALL getin_p('iflag_phytrac',iflag_phytrac)
1349	nvm_lmdz = 13
1350	CALL getin_p('NVM',nvm_lmdz)
1351
1352	WRITE(lunout,*) 'iflag_alp_wk_cond=', iflag_alp_wk_cond
1353	WRITE(lunout,*) 'random_ntrig_max=', random_notrig_max
1354	WRITE(lunout,*) 'ok_adjwk=', ok_adjwk
1355	WRITE(lunout,*) 'iflag_adjwk=', iflag_adjwk
1356	WRITE(lunout,*) 'qtcon_multistep_max=',dtcon_multistep_max
1357	WRITE(lunout,*) 'qdcon_multistep_max=',dqcon_multistep_max
1358	WRITE(lunout,*) 'ratqsp0=', ratqsp0
1359	WRITE(lunout,*) 'ratqsdp=', ratqsdp
1360	WRITE(lunout,*) 'iflag_wake_tend=', iflag_wake_tend
1361	WRITE(lunout,*) 'ok_bad_ecmwf_thermo=',ok_bad_ecmwf_thermo
1362	WRITE(lunout,*) 'ok_bug_cv_trac=', ok_bug_cv_trac
1363	WRITE(lunout,*) 'ok_bug_split_th=', ok_bug_split_th
1364	WRITE(lunout,*) 'fl_ebil=', fl_ebil
1365	WRITE(lunout,*) 'fl_cor_ebil=', fl_cor_ebil
1366	WRITE(lunout,*) 'iflag_phytrac=', iflag_phytrac
1367	WRITE(lunout,*) 'NVM=', nvm_lmdz
1368
1369	!--PC: defining fields to be exchanged between LMDz, ORCHIDEE and NEMO
1370	WRITE(lunout,*) 'Call to infocfields from physiq'
1371	CALL infocfields_init
1372
1373	ENDIF
1374
1375	IF (prt_level.ge.1) print *,'CONVERGENCE PHYSIQUE THERM 1 '
1376
1377	!======================================================================
1378	! Gestion calendrier : mise a jour du module phys_cal_mod
1379	!
1380	! CALL phys_cal_update(jD_cur,jH_cur)
1381
1382	!
1383	! Si c'est le debut, il faut initialiser plusieurs choses
1384	! ********
1385	!
1386	IF (debut) THEN
1387	!rv CRinitialisation de wght_th et lalim_conv pour la
1388	!definition de la couche alimentation de la convection a partir
1389	!des caracteristiques du thermique
1390	wght_th(:,:)=1.
1391	lalim_conv(:)=1
1392	!RC
1393	ustar(:,:)=0.
1394	! u10m(:,:)=0.
1395	! v10m(:,:)=0.
1396	rain_con(:)=0.
1397	snow_con(:)=0.
1398	topswai(:)=0.
1399	topswad(:)=0.
1400	solswai(:)=0.
1401	solswad(:)=0.
1402
1403	wmax_th(:)=0.
1404	tau_overturning_th(:)=0.
1405
1406	IF (type_trac == 'inca') THEN
1407	! jg : initialisation jusqu'au ces variables sont dans restart
1408	ccm(:,:,:) = 0.
1409	tau_aero(:,:,:,:) = 0.
1410	piz_aero(:,:,:,:) = 0.
1411	cg_aero(:,:,:,:) = 0.
1412
1413	config_inca='none' ! default
1414	CALL getin_p('config_inca',config_inca)
1415
1416	ELSE
1417	config_inca='none' ! default
1418	ENDIF
1419
1420	tau_aero(:,:,:,:) = 1.e-15
1421	piz_aero(:,:,:,:) = 1.
1422	cg_aero(:,:,:,:) = 0.
1423
1424	IF (aerosol_couple .AND. (config_inca /= "aero" &
1425	.AND. config_inca /= "aeNP ")) THEN
1426	abort_message &
1427	= 'if aerosol_couple is activated, config_inca need to be ' &
1428	// 'aero or aeNP'
1429	CALL abort_physic (modname,abort_message,1)
1430	ENDIF
1431
1432	rnebcon0(:,:) = 0.0
1433	clwcon0(:,:) = 0.0
1434	rnebcon(:,:) = 0.0
1435	clwcon(:,:) = 0.0
1436
1437	!
1438	print*,'iflag_coupl,iflag_clos,iflag_wake', &
1439	iflag_coupl,iflag_clos,iflag_wake
1440	print*,'iflag_cycle_diurne', iflag_cycle_diurne
1441	!
1442	IF (iflag_con.EQ.2.AND.iflag_cld_th.GT.-1) THEN
1443	abort_message = 'Tiedtke needs iflag_cld_th=-2 or -1'
1444	CALL abort_physic (modname,abort_message,1)
1445	ENDIF
1446	!
1447	!
1448	! Initialiser les compteurs:
1449	!
1450	itap = 0
1451	itaprad = 0
1452	itapcv = 0
1453	itapwk = 0
1454
1455	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1456	!! Un petit travail \`a faire ici.
1457	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1458
1459	IF (iflag_pbl>1) THEN
1460	PRINT*, "Using method MELLOR&YAMADA"
1461	ENDIF
1462
1463	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1464	! FH 2008/05/02 changement lie a la lecture de nbapp_rad dans
1465	! phylmd plutot que dyn3d
1466	! Attention : la version precedente n'etait pas tres propre.
1467	! Il se peut qu'il faille prendre une valeur differente de nbapp_rad
1468	! pour obtenir le meme resultat.
1469	!jyg for fh<
1470	WRITE(lunout,*) 'Pas de temps phys_tstep pdtphys ',phys_tstep,pdtphys
1471	IF (abs(phys_tstep-pdtphys)>1.e-10) THEN
1472	abort_message='pas de temps doit etre entier en seconde pour orchidee et XIOS'
1473	CALL abort_physic(modname,abort_message,1)
1474	ENDIF
1475	!>jyg
1476	IF (MOD(NINT(86400./phys_tstep),nbapp_rad).EQ.0) THEN
1477	radpas = NINT( 86400./phys_tstep)/nbapp_rad
1478	ELSE
1479	WRITE(lunout,*) 'le nombre de pas de temps physique doit etre un ', &
1480	'multiple de nbapp_rad'
1481	WRITE(lunout,*) 'changer nbapp_rad ou alors commenter ce test ', &
1482	'mais 1+1<>2'
1483	abort_message='nbre de pas de temps physique n est pas multiple ' &
1484	// 'de nbapp_rad'
1485	CALL abort_physic(modname,abort_message,1)
1486	ENDIF
1487	IF (nbapp_cv .EQ. 0) nbapp_cv=86400./phys_tstep
1488	IF (nbapp_wk .EQ. 0) nbapp_wk=86400./phys_tstep
1489	print *,'physiq, nbapp_cv, nbapp_wk ',nbapp_cv,nbapp_wk
1490	IF (MOD(NINT(86400./phys_tstep),nbapp_cv).EQ.0) THEN
1491	cvpas_0 = NINT( 86400./phys_tstep)/nbapp_cv
1492	cvpas = cvpas_0
1493	print *,'physiq, cvpas ',cvpas
1494	ELSE
1495	WRITE(lunout,*) 'le nombre de pas de temps physique doit etre un ', &
1496	'multiple de nbapp_cv'
1497	WRITE(lunout,*) 'changer nbapp_cv ou alors commenter ce test ', &
1498	'mais 1+1<>2'
1499	abort_message='nbre de pas de temps physique n est pas multiple ' &
1500	// 'de nbapp_cv'
1501	CALL abort_physic(modname,abort_message,1)
1502	ENDIF
1503	IF (MOD(NINT(86400./phys_tstep),nbapp_wk).EQ.0) THEN
1504	wkpas = NINT( 86400./phys_tstep)/nbapp_wk
1505	! print *,'physiq, wkpas ',wkpas
1506	ELSE
1507	WRITE(lunout,*) 'le nombre de pas de temps physique doit etre un ', &
1508	'multiple de nbapp_wk'
1509	WRITE(lunout,*) 'changer nbapp_wk ou alors commenter ce test ', &
1510	'mais 1+1<>2'
1511	abort_message='nbre de pas de temps physique n est pas multiple ' &
1512	// 'de nbapp_wk'
1513	CALL abort_physic(modname,abort_message,1)
1514	ENDIF
1515	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1516	CALL init_iophy_new(latitude_deg,longitude_deg)
1517
1518	!===================================================================
1519	!IM stations CFMIP
1520	nCFMIP=npCFMIP
1521	OPEN(98,file='npCFMIP_param.data',status='old', &
1522	form='formatted',iostat=iostat)
1523	IF (iostat == 0) THEN
1524	READ(98,*,end=998) nCFMIP
1525	998 CONTINUE
1526	CLOSE(98)
1527	CONTINUE
1528	IF(nCFMIP.GT.npCFMIP) THEN
1529	print*,'nCFMIP > npCFMIP : augmenter npCFMIP et recompiler'
1530	CALL abort_physic("physiq", "", 1)
1531	ELSE
1532	print*,'physiq npCFMIP=',npCFMIP,'nCFMIP=',nCFMIP
1533	ENDIF
1534
1535	!
1536	ALLOCATE(tabCFMIP(nCFMIP))
1537	ALLOCATE(lonCFMIP(nCFMIP), latCFMIP(nCFMIP))
1538	ALLOCATE(tabijGCM(nCFMIP))
1539	ALLOCATE(lonGCM(nCFMIP), latGCM(nCFMIP))
1540	ALLOCATE(iGCM(nCFMIP), jGCM(nCFMIP))
1541	!
1542	! lecture des nCFMIP stations CFMIP, de leur numero
1543	! et des coordonnees geographiques lonCFMIP, latCFMIP
1544	!
1545	CALL read_CFMIP_point_locations(nCFMIP, tabCFMIP, &
1546	lonCFMIP, latCFMIP)
1547	!
1548	! identification des
1549	! 1) coordonnees lonGCM, latGCM des points CFMIP dans la
1550	! grille de LMDZ
1551	! 2) indices points tabijGCM de la grille physique 1d sur
1552	! klon points
1553	! 3) indices iGCM, jGCM de la grille physique 2d
1554	!
1555	CALL LMDZ_CFMIP_point_locations(nCFMIP, lonCFMIP, latCFMIP, &
1556	tabijGCM, lonGCM, latGCM, iGCM, jGCM)
1557	!
1558	ELSE
1559	ALLOCATE(tabijGCM(0))
1560	ALLOCATE(lonGCM(0), latGCM(0))
1561	ALLOCATE(iGCM(0), jGCM(0))
1562	ENDIF
1563
1564	#ifdef CPP_IOIPSL
1565
1566	!$OMP MASTER
1567	! FH : if ok_sync=.true. , the time axis is written at each time step
1568	! in the output files. Only at the end in the opposite case
1569	ok_sync_omp=.FALSE.
1570	CALL getin('ok_sync',ok_sync_omp)
1571	CALL phys_output_open(longitude_deg,latitude_deg,nCFMIP,tabijGCM, &
1572	iGCM,jGCM,lonGCM,latGCM, &
1573	jjmp1,nlevSTD,clevSTD,rlevSTD, phys_tstep,ok_veget, &
1574	type_ocean,iflag_pbl,iflag_pbl_split,ok_mensuel,ok_journe, &
1575	ok_hf,ok_instan,ok_LES,ok_ade,ok_aie, &
1576	read_climoz, phys_out_filestations, &
1577	aerosol_couple, &
1578	flag_aerosol_strat, pdtphys, paprs, pphis, &
1579	pplay, lmax_th, ptconv, ptconvth, ivap, &
1580	d_u, d_t, qx, d_qx, zmasse, ok_sync_omp)
1581	!$OMP END MASTER
1582	!$OMP BARRIER
1583	ok_sync=ok_sync_omp
1584
1585	freq_outNMC(1) = ecrit_files(7)
1586	freq_outNMC(2) = ecrit_files(8)
1587	freq_outNMC(3) = ecrit_files(9)
1588	WRITE(lunout,*)'OK freq_outNMC(1)=',freq_outNMC(1)
1589	WRITE(lunout,*)'OK freq_outNMC(2)=',freq_outNMC(2)
1590	WRITE(lunout,*)'OK freq_outNMC(3)=',freq_outNMC(3)
1591
1592	#ifndef CPP_XIOS
1593	CALL ini_paramLMDZ_phy(phys_tstep,nid_ctesGCM)
1594	#endif
1595
1596	#endif
1597	ecrit_reg = ecrit_reg * un_jour
1598	ecrit_tra = ecrit_tra * un_jour
1599
1600	!XXXPB Positionner date0 pour initialisation de ORCHIDEE
1601	date0 = jD_ref
1602	WRITE(,) 'physiq date0 : ',date0
1603	!
1604
1605	! CALL create_climoz(read_climoz)
1606	IF (.NOT. create_etat0_limit) CALL init_aero_fromfile(flag_aerosol) !! initialise aero from file for XIOS interpolation (unstructured_grid)
1607	IF (.NOT. create_etat0_limit) CALL init_readaerosolstrato(flag_aerosol_strat) !! initialise aero strato from file for XIOS interpolation (unstructured_grid)
1608
1609	#ifdef CPP_COSP
1610	IF (ok_cosp) THEN
1611	! DO k = 1, klev
1612	! DO i = 1, klon
1613	! phicosp(i,k) = pphi(i,k) + pphis(i)
1614	! ENDDO
1615	! ENDDO
1616	CALL phys_cosp(itap,phys_tstep,freq_cosp, &
1617	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
1618	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
1619	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
1620	JrNt,ref_liq,ref_ice, &
1621	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
1622	zu10m,zv10m,pphis, &
1623	zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, &
1624	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
1625	prfl(:,1:klev),psfl(:,1:klev), &
1626	pmflxr(:,1:klev),pmflxs(:,1:klev), &
1627	mr_ozone,cldtau, cldemi)
1628	ENDIF
1629	#endif
1630
1631	#ifdef CPP_COSP2
1632	IF (ok_cosp) THEN
1633	! DO k = 1, klev
1634	! DO i = 1, klon
1635	! phicosp(i,k) = pphi(i,k) + pphis(i)
1636	! ENDDO
1637	! ENDDO
1638	CALL phys_cosp2(itap,phys_tstep,freq_cosp, &
1639	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
1640	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
1641	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
1642	JrNt,ref_liq,ref_ice, &
1643	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
1644	zu10m,zv10m,pphis, &
1645	zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, &
1646	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
1647	prfl(:,1:klev),psfl(:,1:klev), &
1648	pmflxr(:,1:klev),pmflxs(:,1:klev), &
1649	mr_ozone,cldtau, cldemi)
1650	ENDIF
1651	#endif
1652
1653	#ifdef CPP_COSPV2
1654	IF (ok_cosp) THEN
1655	DO k = 1, klev
1656	DO i = 1, klon
1657	phicosp(i,k) = pphi(i,k) + pphis(i)
1658	ENDDO
1659	ENDDO
1660	CALL lmdz_cosp_interface(itap,phys_tstep,freq_cosp, &
1661	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
1662	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
1663	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
1664	JrNt,ref_liq,ref_ice, &
1665	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
1666	zu10m,zv10m,pphis, &
1667	phicosp,paprs(:,1:klev),pplay,zxtsol,t_seri, &
1668	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
1669	prfl(:,1:klev),psfl(:,1:klev), &
1670	pmflxr(:,1:klev),pmflxs(:,1:klev), &
1671	mr_ozone,cldtau, cldemi)
1672	ENDIF
1673	#endif
1674
1675	!
1676	!
1677	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1678	! Nouvelle initialisation pour le rayonnement RRTM
1679	!
1680	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1681
1682	CALL iniradia(klon,klev,paprs(1,1:klev+1))
1683	! Initialisation des champs dans phytrac qui sont utilisés par phys_output_write
1684	IF (iflag_phytrac == 1 ) THEN
1685	CALL phytrac_init()
1686	ENDIF
1687
1688	CALL phys_output_write(itap, pdtphys, paprs, pphis, &
1689	pplay, lmax_th, aerosol_couple, &
1690	ok_ade, ok_aie, ok_volcan, ivap, iliq, isol, ok_sync,&
1691	ptconv, read_climoz, clevSTD, &
1692	ptconvth, d_u, d_t, qx, d_qx, zmasse, &
1693	flag_aerosol, flag_aerosol_strat, ok_cdnc)
1694
1695	#ifdef CPP_XIOS
1696	IF (is_omp_master) CALL xios_update_calendar(1)
1697	#endif
1698	IF(read_climoz>=1 .AND. create_etat0_limit) CALL regr_horiz_time_climoz(read_climoz,ok_daily_climoz)
1699	CALL create_etat0_limit_unstruct
1700	CALL phyetat0 ("startphy.nc",clesphy0,tabcntr0)
1701
1702	!jyg<
1703	IF (iflag_pbl<=1) THEN
1704	! No TKE for Standard Physics
1705	pbl_tke(:,:,:)=0.
1706
1707	ELSE IF (klon_glo==1) THEN
1708	pbl_tke(:,:,is_ave) = 0.
1709	DO nsrf=1,nbsrf
1710	DO k = 1,klev+1
1711	pbl_tke(:,k,is_ave) = pbl_tke(:,k,is_ave) &
1712	+pctsrf(:,nsrf)*pbl_tke(:,k,nsrf)
1713	ENDDO
1714	ENDDO
1715	ELSE
1716	pbl_tke(:,:,is_ave) = 0. !ym missing init : maybe must be initialized in the same way that for klon_glo==1 ??
1717	!>jyg
1718	ENDIF
1719	!IM begin
1720	print*,'physiq: clwcon rnebcon ratqs',clwcon(1,1),rnebcon(1,1) &
1721	,ratqs(1,1)
1722	!IM end
1723
1724
1725	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1726	!
1727	! on remet le calendrier a zero
1728	!
1729	IF (raz_date .eq. 1) THEN
1730	itau_phy = 0
1731	ENDIF
1732
1733	! IF (ABS(phys_tstep-pdtphys).GT.0.001) THEN
1734	! WRITE(lunout,*) 'Pas physique n est pas correct',phys_tstep, &
1735	! pdtphys
1736	! abort_message='Pas physique n est pas correct '
1737	! ! call abort_physic(modname,abort_message,1)
1738	! phys_tstep=pdtphys
1739	! ENDIF
1740	IF (nlon .NE. klon) THEN
1741	WRITE(lunout,*)'nlon et klon ne sont pas coherents', nlon, &
1742	klon
1743	abort_message='nlon et klon ne sont pas coherents'
1744	CALL abort_physic(modname,abort_message,1)
1745	ENDIF
1746	IF (nlev .NE. klev) THEN
1747	WRITE(lunout,*)'nlev et klev ne sont pas coherents', nlev, &
1748	klev
1749	abort_message='nlev et klev ne sont pas coherents'
1750	CALL abort_physic(modname,abort_message,1)
1751	ENDIF
1752	!
1753	IF (phys_tstep*REAL(radpas).GT.21600..AND.iflag_cycle_diurne.GE.1) THEN
1754	WRITE(lunout,*)'Nbre d appels au rayonnement insuffisant'
1755	WRITE(lunout,*)"Au minimum 4 appels par jour si cycle diurne"
1756	abort_message='Nbre d appels au rayonnement insuffisant'
1757	CALL abort_physic(modname,abort_message,1)
1758	ENDIF
1759	WRITE(lunout,*)"Clef pour la convection, iflag_con=", iflag_con
1760	WRITE(lunout,*)"Clef pour le driver de la convection, ok_cvl=", &
1761	ok_cvl
1762	!
1763	!KE43
1764	! Initialisation pour la convection de K.E. (sb):
1765	IF (iflag_con.GE.3) THEN
1766
1767	WRITE(lunout,)"** Convection de Kerry Emanuel 4.3 "
1768	WRITE(lunout,*) &
1769	"On va utiliser le melange convectif des traceurs qui"
1770	WRITE(lunout,*)"est calcule dans convect4.3"
1771	WRITE(lunout,*)" !!! penser aux logical flags de phytrac"
1772
1773	DO i = 1, klon
1774	ema_cbmf(i) = 0.
1775	ema_pcb(i) = 0.
1776	ema_pct(i) = 0.
1777	! ema_workcbmf(i) = 0.
1778	ENDDO
1779	!IM15/11/02 rajout initialisation ibas_con,itop_con cf. SB =>BEG
1780	DO i = 1, klon
1781	ibas_con(i) = 1
1782	itop_con(i) = 1
1783	ENDDO
1784	!IM15/11/02 rajout initialisation ibas_con,itop_con cf. SB =>END
1785	!================================================================
1786	!CR:04.12.07: initialisations poches froides
1787	! Controle de ALE et ALP pour la fermeture convective (jyg)
1788	IF (iflag_wake>=1) THEN
1789	CALL ini_wake(0.,0.,it_wape_prescr,wape_prescr,fip_prescr &
1790	,alp_bl_prescr, ale_bl_prescr)
1791	! 11/09/06 rajout initialisation ALE et ALP du wake et PBL(YU)
1792	! print*,'apres ini_wake iflag_cld_th=', iflag_cld_th
1793	!
1794	! Initialize tendencies of wake state variables (for some flag values
1795	! they are not computed).
1796	d_deltat_wk(:,:) = 0.
1797	d_deltaq_wk(:,:) = 0.
1798	d_deltat_wk_gw(:,:) = 0.
1799	d_deltaq_wk_gw(:,:) = 0.
1800	d_deltat_vdf(:,:) = 0.
1801	d_deltaq_vdf(:,:) = 0.
1802	d_deltat_the(:,:) = 0.
1803	d_deltaq_the(:,:) = 0.
1804	d_deltat_ajs_cv(:,:) = 0.
1805	d_deltaq_ajs_cv(:,:) = 0.
1806	d_s_wk(:) = 0.
1807	d_dens_wk(:) = 0.
1808	ENDIF
1809
1810	! do i = 1,klon
1811	! Ale_bl(i)=0.
1812	! Alp_bl(i)=0.
1813	! enddo
1814
1815	!ELSE
1816	! ALLOCATE(tabijGCM(0))
1817	! ALLOCATE(lonGCM(0), latGCM(0))
1818	! ALLOCATE(iGCM(0), jGCM(0))
1819	ENDIF
1820
1821	DO i=1,klon
1822	rugoro(i) = f_rugoro * MAX(1.0e-05, zstd(i)*zsig(i)/2.0)
1823	ENDDO
1824
1825	!34EK
1826	IF (ok_orodr) THEN
1827
1828	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1829	! FH sans doute a enlever de finitivement ou, si on le
1830	! garde, l'activer justement quand ok_orodr = false.
1831	! ce rugoro est utilise par la couche limite et fait double emploi
1832	! avec les param\'etrisations sp\'ecifiques de Francois Lott.
1833	! DO i=1,klon
1834	! rugoro(i) = MAX(1.0e-05, zstd(i)*zsig(i)/2.0)
1835	! ENDDO
1836	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1837	IF (ok_strato) THEN
1838	CALL SUGWD_strato(klon,klev,paprs,pplay)
1839	ELSE
1840	CALL SUGWD(klon,klev,paprs,pplay)
1841	ENDIF
1842
1843	DO i=1,klon
1844	zuthe(i)=0.
1845	zvthe(i)=0.
1846	IF (zstd(i).gt.10.) THEN
1847	zuthe(i)=(1.-zgam(i))*cos(zthe(i))
1848	zvthe(i)=(1.-zgam(i))*sin(zthe(i))
1849	ENDIF
1850	ENDDO
1851	ENDIF
1852	!
1853	!
1854	lmt_pas = NINT(86400./phys_tstep * 1.0) ! tous les jours
1855	WRITE(lunout,*)'La frequence de lecture surface est de ', &
1856	lmt_pas
1857	!
1858	capemaxcels = 't_max(X)'
1859	t2mincels = 't_min(X)'
1860	t2maxcels = 't_max(X)'
1861	tinst = 'inst(X)'
1862	tave = 'ave(X)'
1863	!IM cf. AM 081204 BEG
1864	write(lunout,*)'AVANT HIST IFLAG_CON=',iflag_con
1865	!IM cf. AM 081204 END
1866	!
1867	!=============================================================
1868	! Initialisation des sorties
1869	!=============================================================
1870
1871	#ifdef CPP_XIOS
1872	! Get "missing_val" value from XML files (from temperature variable)
1873	!$OMP MASTER
1874	CALL xios_get_field_attr("temp",default_value=missing_val_omp)
1875	!$OMP END MASTER
1876	!$OMP BARRIER
1877	missing_val=missing_val_omp
1878	#endif
1879
1880	#ifdef CPP_XIOS
1881	! Need to put this initialisation after phyetat0 as in the coupled model the XIOS context is only
1882	! initialised at that moment
1883	! Get "missing_val" value from XML files (from temperature variable)
1884	!$OMP MASTER
1885	CALL xios_get_field_attr("temp",default_value=missing_val_omp)
1886	!$OMP END MASTER
1887	!$OMP BARRIER
1888	missing_val=missing_val_omp
1889	#endif
1890
1891
1892	CALL printflag( tabcntr0,radpas,ok_journe, &
1893	ok_instan, ok_region )
1894	!
1895	!
1896	!
1897	! Prescrire l'ozone dans l'atmosphere
1898	!
1899	!
1900	!c DO i = 1, klon
1901	!c DO k = 1, klev
1902	!c CALL o3cm (paprs(i,k)/100.,paprs(i,k+1)/100., wo(i,k),20)
1903	!c ENDDO
1904	!c ENDDO
1905	!
1906	IF (type_trac == 'inca') THEN
1907	#ifdef INCA
1908	CALL VTe(VTphysiq)
1909	CALL VTb(VTinca)
1910	calday = REAL(days_elapsed) + jH_cur
1911	WRITE(lunout,*) 'initial time chemini', days_elapsed, calday
1912
1913	CALL chemini( &
1914	rg, &
1915	ra, &
1916	cell_area, &
1917	latitude_deg, &
1918	longitude_deg, &
1919	presnivs, &
1920	calday, &
1921	klon, &
1922	nqtot, &
1923	nqo, &
1924	pdtphys, &
1925	annee_ref, &
1926	year_cur, &
1927	day_ref, &
1928	day_ini, &
1929	start_time, &
1930	itau_phy, &
1931	date0, &
1932	io_lon, &
1933	io_lat, &
1934	chemistry_couple, &
1935	init_source, &
1936	init_tauinca, &
1937	init_pizinca, &
1938	init_cginca, &
1939	init_ccminca)
1940
1941
1942	! initialisation des variables depuis le restart de inca
1943	ccm(:,:,:) = init_ccminca
1944	tau_aero(:,:,:,:) = init_tauinca
1945	piz_aero(:,:,:,:) = init_pizinca
1946	cg_aero(:,:,:,:) = init_cginca
1947	!
1948
1949
1950	CALL VTe(VTinca)
1951	CALL VTb(VTphysiq)
1952	#endif
1953	ENDIF
1954	IF (type_trac == 'repr') THEN
1955	#ifdef REPROBUS
1956	CALL chemini_rep( &
1957	presnivs, &
1958	pdtphys, &
1959	annee_ref, &
1960	day_ref, &
1961	day_ini, &
1962	start_time, &
1963	itau_phy, &
1964	io_lon, &
1965	io_lat)
1966	#endif
1967	ENDIF
1968
1969	!$omp single
1970	IF (read_climoz >= 1) CALL open_climoz(ncid_climoz, press_cen_climoz, &
1971	press_edg_climoz, time_climoz, ok_daily_climoz, adjust_tropopause)
1972	!$omp end single
1973	!
1974	!IM betaCRF
1975	pfree=70000. !Pa
1976	beta_pbl=1.
1977	beta_free=1.
1978	lon1_beta=-180.
1979	lon2_beta=+180.
1980	lat1_beta=90.
1981	lat2_beta=-90.
1982	mskocean_beta=.FALSE.
1983
1984	!albedo SB >>>
1985	SELECT CASE(nsw)
1986	CASE(2)
1987	SFRWL(1)=0.45538747
1988	SFRWL(2)=0.54461211
1989	CASE(4)
1990	SFRWL(1)=0.45538747
1991	SFRWL(2)=0.32870591
1992	SFRWL(3)=0.18568763
1993	SFRWL(4)=3.02191470E-02
1994	CASE(6)
1995	SFRWL(1)=1.28432794E-03
1996	SFRWL(2)=0.12304168
1997	SFRWL(3)=0.33106142
1998	SFRWL(4)=0.32870591
1999	SFRWL(5)=0.18568763
2000	SFRWL(6)=3.02191470E-02
2001	END SELECT
2002
2003
2004	!albedo SB <<<
2005
2006	OPEN(99,file='beta_crf.data',status='old', &
2007	form='formatted',err=9999)
2008	READ(99,*,end=9998) pfree
2009	READ(99,*,end=9998) beta_pbl
2010	READ(99,*,end=9998) beta_free
2011	READ(99,*,end=9998) lon1_beta
2012	READ(99,*,end=9998) lon2_beta
2013	READ(99,*,end=9998) lat1_beta
2014	READ(99,*,end=9998) lat2_beta
2015	READ(99,*,end=9998) mskocean_beta
2016	9998 Continue
2017	CLOSE(99)
2018	9999 Continue
2019	WRITE(,)'pfree=',pfree
2020	WRITE(,)'beta_pbl=',beta_pbl
2021	WRITE(,)'beta_free=',beta_free
2022	WRITE(,)'lon1_beta=',lon1_beta
2023	WRITE(,)'lon2_beta=',lon2_beta
2024	WRITE(,)'lat1_beta=',lat1_beta
2025	WRITE(,)'lat2_beta=',lat2_beta
2026	WRITE(,)'mskocean_beta=',mskocean_beta
2027
2028	!lwoff=y : offset LW CRE for radiation code and other schemes
2029	!lwoff=y : betalwoff=1.
2030	betalwoff=0.
2031	IF (ok_lwoff) THEN
2032	betalwoff=1.
2033	ENDIF
2034	WRITE(,)'ok_lwoff=',ok_lwoff
2035	!
2036	!lwoff=y to begin only sollw and sollwdown are set up to CS values
2037	sollw = sollw + betalwoff * (sollw0 - sollw)
2038	sollwdown(:)= sollwdown(:) + betalwoff (-1.ZFLDN0(:,1) - &
2039	sollwdown(:))
2040
2041
2042	ENDIF
2043	!
2044	! ************** Fin de IF ( debut ) *************
2045	!
2046	!
2047	! Incrementer le compteur de la physique
2048	!
2049	itap = itap + 1
2050	IF (is_master .OR. prt_level > 9) THEN
2051	IF (prt_level > 5 .or. MOD(itap,5) == 0) THEN
2052	WRITE(LUNOUT,*)'Entering physics elapsed seconds since start ', current_time
2053	WRITE(LUNOUT,100)year_cur,mth_cur,day_cur,hour/3600.
2054	100 FORMAT('Date = ',i4.4,' / ',i2.2, ' / ',i2.2,' : ',f20.17)
2055	ENDIF
2056	ENDIF
2057	!
2058	!
2059	! Update fraction of the sub-surfaces (pctsrf) and
2060	! initialize, where a new fraction has appeared, all variables depending
2061	! on the surface fraction.
2062	!
2063	CALL change_srf_frac(itap, phys_tstep, days_elapsed+1, &
2064	pctsrf, fevap, z0m, z0h, agesno, &
2065	falb_dir, falb_dif, ftsol, ustar, u10m, v10m, pbl_tke)
2066
2067	! Update time and other variables in Reprobus
2068	IF (type_trac == 'repr') THEN
2069	#ifdef REPROBUS
2070	CALL Init_chem_rep_xjour(jD_cur-jD_ref+day_ref)
2071	print*,'xjour equivalent rjourvrai',jD_cur-jD_ref+day_ref
2072	CALL Rtime(debut)
2073	#endif
2074	ENDIF
2075
2076	! Tendances bidons pour les processus qui n'affectent pas certaines
2077	! variables.
2078	du0(:,:)=0.
2079	dv0(:,:)=0.
2080	dt0 = 0.
2081	dq0(:,:)=0.
2082	dql0(:,:)=0.
2083	dqi0(:,:)=0.
2084	dsig0(:) = 0.
2085	ddens0(:) = 0.
2086	wkoccur1(:)=1
2087	!
2088	! Mettre a zero des variables de sortie (pour securite)
2089	!
2090	DO i = 1, klon
2091	d_ps(i) = 0.0
2092	ENDDO
2093	DO k = 1, klev
2094	DO i = 1, klon
2095	d_t(i,k) = 0.0
2096	d_u(i,k) = 0.0
2097	d_v(i,k) = 0.0
2098	ENDDO
2099	ENDDO
2100	DO iq = 1, nqtot
2101	DO k = 1, klev
2102	DO i = 1, klon
2103	d_qx(i,k,iq) = 0.0
2104	ENDDO
2105	ENDDO
2106	ENDDO
2107	beta_prec_fisrt(:,:)=0.
2108	beta_prec(:,:)=0.
2109	!
2110	! Output variables from the convective scheme should not be set to 0
2111	! since convection is not always called at every time step.
2112	IF (ok_bug_cv_trac) THEN
2113	da(:,:)=0.
2114	mp(:,:)=0.
2115	phi(:,:,:)=0.
2116	! RomP >>>
2117	phi2(:,:,:)=0.
2118	epmlmMm(:,:,:)=0.
2119	eplaMm(:,:)=0.
2120	d1a(:,:)=0.
2121	dam(:,:)=0.
2122	pmflxr(:,:)=0.
2123	pmflxs(:,:)=0.
2124	! RomP <<<
2125	ENDIF
2126
2127	!
2128	! Ne pas affecter les valeurs entrees de u, v, h, et q
2129	!
2130	DO k = 1, klev
2131	DO i = 1, klon
2132	t_seri(i,k) = t(i,k)
2133	u_seri(i,k) = u(i,k)
2134	v_seri(i,k) = v(i,k)
2135	q_seri(i,k) = qx(i,k,ivap)
2136	ql_seri(i,k) = qx(i,k,iliq)
2137	!CR: ATTENTION, on rajoute la variable glace
2138	IF (nqo.eq.2) THEN
2139	qs_seri(i,k) = 0.
2140	ELSE IF (nqo.eq.3) THEN
2141	qs_seri(i,k) = qx(i,k,isol)
2142	ENDIF
2143	ENDDO
2144	ENDDO
2145	!
2146	!--OB mass fixer
2147	IF (mass_fixer) THEN
2148	!--store initial water burden
2149	qql1(:)=0.0
2150	DO k = 1, klev
2151	qql1(:)=qql1(:)+(q_seri(:,k)+ql_seri(:,k)+qs_seri(:,k))*zmasse(:,k)
2152	ENDDO
2153	ENDIF
2154	!--fin mass fixer
2155
2156	tke0(:,:)=pbl_tke(:,:,is_ave)
2157	!CR:Nombre de traceurs de l'eau: nqo
2158	! IF (nqtot.GE.3) THEN
2159	IF (nqtot.GE.(nqo+1)) THEN
2160	! DO iq = 3, nqtot
2161	DO iq = nqo+1, nqtot
2162	DO k = 1, klev
2163	DO i = 1, klon
2164	! tr_seri(i,k,iq-2) = qx(i,k,iq)
2165	tr_seri(i,k,iq-nqo) = qx(i,k,iq)
2166	ENDDO
2167	ENDDO
2168	ENDDO
2169	ELSE
2170	DO k = 1, klev
2171	DO i = 1, klon
2172	tr_seri(i,k,1) = 0.0
2173	ENDDO
2174	ENDDO
2175	ENDIF
2176	!
2177	! Temporary solutions adressing ticket #104 and the non initialisation of tr_ancien
2178	! LF
2179	IF (debut) THEN
2180	WRITE(lunout,*)' WARNING: tr_ancien initialised to tr_seri'
2181	DO iq = nqo+1, nqtot
2182	tr_ancien(:,:,iq-nqo)=tr_seri(:,:,iq-nqo)
2183	ENDDO
2184	ENDIF
2185	!
2186	DO i = 1, klon
2187	ztsol(i) = 0.
2188	ENDDO
2189	DO nsrf = 1, nbsrf
2190	DO i = 1, klon
2191	ztsol(i) = ztsol(i) + ftsol(i,nsrf)*pctsrf(i,nsrf)
2192	ENDDO
2193	ENDDO
2194	! Initialize variables used for diagnostic purpose
2195	IF (flag_inhib_tend .ne. 0) CALL init_cmp_seri
2196
2197	! Diagnostiquer la tendance dynamique
2198	!
2199	IF (ancien_ok) THEN
2200	!
2201	d_u_dyn(:,:) = (u_seri(:,:)-u_ancien(:,:))/phys_tstep
2202	d_v_dyn(:,:) = (v_seri(:,:)-v_ancien(:,:))/phys_tstep
2203	d_t_dyn(:,:) = (t_seri(:,:)-t_ancien(:,:))/phys_tstep
2204	d_q_dyn(:,:) = (q_seri(:,:)-q_ancien(:,:))/phys_tstep
2205	d_ql_dyn(:,:) = (ql_seri(:,:)-ql_ancien(:,:))/phys_tstep
2206	d_qs_dyn(:,:) = (qs_seri(:,:)-qs_ancien(:,:))/phys_tstep
2207	CALL water_int(klon,klev,q_seri,zmasse,zx_tmp_fi2d)
2208	d_q_dyn2d(:)=(zx_tmp_fi2d(:)-prw_ancien(:))/phys_tstep
2209	CALL water_int(klon,klev,ql_seri,zmasse,zx_tmp_fi2d)
2210	d_ql_dyn2d(:)=(zx_tmp_fi2d(:)-prlw_ancien(:))/phys_tstep
2211	CALL water_int(klon,klev,qs_seri,zmasse,zx_tmp_fi2d)
2212	d_qs_dyn2d(:)=(zx_tmp_fi2d(:)-prsw_ancien(:))/phys_tstep
2213	! !! RomP >>> td dyn traceur
2214	IF (nqtot.GT.nqo) THEN ! jyg
2215	DO iq = nqo+1, nqtot ! jyg
2216	d_tr_dyn(:,:,iq-nqo)=(tr_seri(:,:,iq-nqo)-tr_ancien(:,:,iq-nqo))/phys_tstep ! jyg
2217	ENDDO
2218	ENDIF
2219	! !! RomP <<<
2220	ELSE
2221	d_u_dyn(:,:) = 0.0
2222	d_v_dyn(:,:) = 0.0
2223	d_t_dyn(:,:) = 0.0
2224	d_q_dyn(:,:) = 0.0
2225	d_ql_dyn(:,:) = 0.0
2226	d_qs_dyn(:,:) = 0.0
2227	d_q_dyn2d(:) = 0.0
2228	d_ql_dyn2d(:) = 0.0
2229	d_qs_dyn2d(:) = 0.0
2230	! !! RomP >>> td dyn traceur
2231	IF (nqtot.GT.nqo) THEN ! jyg
2232	DO iq = nqo+1, nqtot ! jyg
2233	d_tr_dyn(:,:,iq-nqo)= 0.0 ! jyg
2234	ENDDO
2235	ENDIF
2236	! !! RomP <<<
2237	ancien_ok = .TRUE.
2238	ENDIF
2239	!
2240	! Ajouter le geopotentiel du sol:
2241	!
2242	DO k = 1, klev
2243	DO i = 1, klon
2244	zphi(i,k) = pphi(i,k) + pphis(i)
2245	ENDDO
2246	ENDDO
2247	!
2248	! Verifier les temperatures
2249	!
2250	!IM BEG
2251	IF (check) THEN
2252	amn=MIN(ftsol(1,is_ter),1000.)
2253	amx=MAX(ftsol(1,is_ter),-1000.)
2254	DO i=2, klon
2255	amn=MIN(ftsol(i,is_ter),amn)
2256	amx=MAX(ftsol(i,is_ter),amx)
2257	ENDDO
2258	!
2259	PRINT*,' debut avant hgardfou min max ftsol',itap,amn,amx
2260	ENDIF !(check) THEN
2261	!IM END
2262	!
2263	CALL hgardfou(t_seri,ftsol,'debutphy',abortphy)
2264	IF (abortphy==1) Print*,'ERROR ABORT hgardfou debutphy'
2265
2266	!
2267	!IM BEG
2268	IF (check) THEN
2269	amn=MIN(ftsol(1,is_ter),1000.)
2270	amx=MAX(ftsol(1,is_ter),-1000.)
2271	DO i=2, klon
2272	amn=MIN(ftsol(i,is_ter),amn)
2273	amx=MAX(ftsol(i,is_ter),amx)
2274	ENDDO
2275	!
2276	PRINT*,' debut apres hgardfou min max ftsol',itap,amn,amx
2277	ENDIF !(check) THEN
2278	!IM END
2279	!
2280	! Mettre en action les conditions aux limites (albedo, sst, etc.).
2281	! Prescrire l'ozone et calculer l'albedo sur l'ocean.
2282	!
2283	! Update ozone if day change
2284	IF (MOD(itap-1,lmt_pas) == 0) THEN
2285	IF (read_climoz <= 0) THEN
2286	! Once per day, update ozone from Royer:
2287	IF (solarlong0<-999.) then
2288	! Generic case with evolvoing season
2289	zzz=real(days_elapsed+1)
2290	ELSE IF (abs(solarlong0-1000.)<1.e-4) then
2291	! Particular case with annual mean insolation
2292	zzz=real(90) ! could be revisited
2293	IF (read_climoz/=-1) THEN
2294	abort_message ='read_climoz=-1 is recommended when ' &
2295	// 'solarlong0=1000.'
2296	CALL abort_physic (modname,abort_message,1)
2297	ENDIF
2298	ELSE
2299	! Case where the season is imposed with solarlong0
2300	zzz=real(90) ! could be revisited
2301	ENDIF
2302
2303	wo(:,:,1)=ozonecm(latitude_deg, paprs,read_climoz,rjour=zzz)
2304	#ifdef REPROBUS
2305	ptrop=dyn_tropopause(t_seri, ztsol, paprs, pplay, rot)/100.
2306	DO i = 1, klon
2307	Z1=t_seri(i,itroprep(i)+1)
2308	Z2=t_seri(i,itroprep(i))
2309	fac=(Z1-Z2)/alog(pplay(i,itroprep(i)+1)/pplay(i,itroprep(i)))
2310	B=Z2-fac*alog(pplay(i,itroprep(i)))
2311	ttrop(i)= fac*alog(ptrop(i))+B
2312	!
2313	Z1= 1.e-3 * ( pphi(i,itroprep(i)+1)+pphis(i) ) / gravit
2314	Z2= 1.e-3 * ( pphi(i,itroprep(i)) +pphis(i) ) / gravit
2315	fac=(Z1-Z2)/alog(pplay(i,itroprep(i)+1)/pplay(i,itroprep(i)))
2316	B=Z2-fac*alog(pplay(i,itroprep(i)))
2317	ztrop(i)=fac*alog(ptrop(i))+B
2318	ENDDO
2319	#endif
2320	ELSE
2321	!--- ro3i = elapsed days number since current year 1st january, 0h
2322	ro3i=days_elapsed+jh_cur-jh_1jan
2323	!--- scaling for old style files (360 records)
2324	IF(SIZE(time_climoz)==360.AND..NOT.ok_daily_climoz) ro3i=ro3i*360./year_len
2325	IF(adjust_tropopause) THEN
2326	CALL regr_pr_time_av(ncid_climoz, vars_climoz(1:read_climoz), &
2327	ro3i, 'C', press_cen_climoz, pplay, wo, paprs(:,1), &
2328	time_climoz , longitude_deg, latitude_deg, &
2329	dyn_tropopause(t_seri, ztsol, paprs, pplay, rot))
2330	ELSE
2331	CALL regr_pr_time_av(ncid_climoz, vars_climoz(1:read_climoz), &
2332	ro3i, 'C', press_cen_climoz, pplay, wo, paprs(:,1), &
2333	time_climoz )
2334	ENDIF
2335	! Convert from mole fraction of ozone to column density of ozone in a
2336	! cell, in kDU:
2337	FORALL (l = 1: read_climoz) wo(:, :, l) = wo(:, :, l) * rmo3 / rmd &
2338	* zmasse / dobson_u / 1e3
2339	! (By regridding ozone values for LMDZ only once a day, we
2340	! have already neglected the variation of pressure in one
2341	! day. So do not recompute "wo" at each time step even if
2342	! "zmasse" changes a little.)
2343	ENDIF
2344	ENDIF
2345	!
2346	! Re-evaporer l'eau liquide nuageuse
2347	!
2348	CALL reevap (klon,klev,iflag_ice_thermo,t_seri,q_seri,ql_seri,qs_seri, &
2349	& d_t_eva,d_q_eva,d_ql_eva,d_qi_eva)
2350
2351	CALL add_phys_tend &
2352	(du0,dv0,d_t_eva,d_q_eva,d_ql_eva,d_qi_eva,paprs,&
2353	'eva',abortphy,flag_inhib_tend,itap,0)
2354	CALL prt_enerbil('eva',itap)
2355
2356	!=========================================================================
2357	! Calculs de l'orbite.
2358	! Necessaires pour le rayonnement et la surface (calcul de l'albedo).
2359	! doit donc etre plac\'e avant radlwsw et pbl_surface
2360
2361	! !! jyg 17 Sep 2010 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
2362	CALL ymds2ju(year_cur, mth_eq, day_eq,0., jD_eq)
2363	day_since_equinox = (jD_cur + jH_cur) - jD_eq
2364	!
2365	! choix entre calcul de la longitude solaire vraie ou valeur fixee a
2366	! solarlong0
2367	IF (solarlong0<-999.) THEN
2368	IF (new_orbit) THEN
2369	! calcul selon la routine utilisee pour les planetes
2370	CALL solarlong(day_since_equinox, zlongi, dist)
2371	ELSE
2372	! calcul selon la routine utilisee pour l'AR4
2373	CALL orbite(REAL(days_elapsed+1),zlongi,dist)
2374	ENDIF
2375	ELSE
2376	zlongi=solarlong0 ! longitude solaire vraie
2377	dist=1. ! distance au soleil / moyenne
2378	ENDIF
2379
2380	IF (prt_level.ge.1) write(lunout,*)'Longitude solaire ',zlongi,solarlong0,dist
2381
2382
2383	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
2384	! Calcul de l'ensoleillement :
2385	! ============================
2386	! Pour une solarlong0=1000., on calcule un ensoleillement moyen sur
2387	! l'annee a partir d'une formule analytique.
2388	! Cet ensoleillement est sym\'etrique autour de l'\'equateur et
2389	! non nul aux poles.
2390	IF (abs(solarlong0-1000.)<1.e-4) THEN
2391	CALL zenang_an(iflag_cycle_diurne.GE.1,jH_cur, &
2392	latitude_deg,longitude_deg,rmu0,fract)
2393	swradcorr(:) = 1.0
2394	JrNt(:) = 1.0
2395	zrmu0(:) = rmu0(:)
2396	ELSE
2397	! recode par Olivier Boucher en sept 2015
2398	SELECT CASE (iflag_cycle_diurne)
2399	CASE(0)
2400	! Sans cycle diurne
2401	CALL angle(zlongi, latitude_deg, fract, rmu0)
2402	swradcorr = 1.0
2403	JrNt = 1.0
2404	zrmu0 = rmu0
2405	CASE(1)
2406	! Avec cycle diurne sans application des poids
2407	! bit comparable a l ancienne formulation cycle_diurne=true
2408	! on integre entre gmtime et gmtime+radpas
2409	zdtime=phys_tstep*REAL(radpas) ! pas de temps du rayonnement (s)
2410	CALL zenang(zlongi,jH_cur,0.0,zdtime, &
2411	latitude_deg,longitude_deg,rmu0,fract)
2412	zrmu0 = rmu0
2413	swradcorr = 1.0
2414	! Calcul du flag jour-nuit
2415	JrNt = 0.0
2416	WHERE (fract.GT.0.0) JrNt = 1.0
2417	CASE(2)
2418	! Avec cycle diurne sans application des poids
2419	! On integre entre gmtime-pdtphys et gmtime+pdtphys*(radpas-1)
2420	! Comme cette routine est appele a tous les pas de temps de
2421	! la physique meme si le rayonnement n'est pas appele je
2422	! remonte en arriere les radpas-1 pas de temps
2423	! suivant. Petite ruse avec MOD pour prendre en compte le
2424	! premier pas de temps de la physique pendant lequel
2425	! itaprad=0
2426	zdtime1=phys_tstep*REAL(-MOD(itaprad,radpas)-1)
2427	zdtime2=phys_tstep*REAL(radpas-MOD(itaprad,radpas)-1)
2428	CALL zenang(zlongi,jH_cur,zdtime1,zdtime2, &
2429	latitude_deg,longitude_deg,rmu0,fract)
2430	!
2431	! Calcul des poids
2432	!
2433	zdtime1=-phys_tstep !--on corrige le rayonnement pour representer le
2434	zdtime2=0.0 !--pas de temps de la physique qui se termine
2435	CALL zenang(zlongi,jH_cur,zdtime1,zdtime2, &
2436	latitude_deg,longitude_deg,zrmu0,zfract)
2437	swradcorr = 0.0
2438	WHERE (rmu0.GE.1.e-10 .OR. fract.GE.1.e-10) &
2439	swradcorr=zfract/fract*zrmu0/rmu0
2440	! Calcul du flag jour-nuit
2441	JrNt = 0.0
2442	WHERE (zfract.GT.0.0) JrNt = 1.0
2443	END SELECT
2444	ENDIF
2445	sza_o = ACOS (rmu0) *180./pi
2446
2447	IF (mydebug) THEN
2448	CALL writefield_phy('u_seri',u_seri,nbp_lev)
2449	CALL writefield_phy('v_seri',v_seri,nbp_lev)
2450	CALL writefield_phy('t_seri',t_seri,nbp_lev)
2451	CALL writefield_phy('q_seri',q_seri,nbp_lev)
2452	ENDIF
2453
2454	!cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
2455	! Appel au pbl_surface : Planetary Boudary Layer et Surface
2456	! Cela implique tous les interactions des sous-surfaces et la
2457	! partie diffusion turbulent du couche limit.
2458	!
2459	! Certains varibales de sorties de pbl_surface sont utiliser que pour
2460	! ecriture des fihiers hist_XXXX.nc, ces sont :
2461	! qsol, zq2m, s_pblh, s_lcl,
2462	! s_capCL, s_oliqCL, s_cteiCL,s_pblT,
2463	! s_therm, s_trmb1, s_trmb2, s_trmb3,
2464	! zu10m, zv10m, fder,
2465	! zxqsurf, rh2m, zxfluxu, zxfluxv,
2466	! frugs, agesno, fsollw, fsolsw,
2467	! d_ts, fevap, fluxlat, t2m,
2468	! wfbils, wfbilo, fluxt, fluxu, fluxv,
2469	!
2470	! Certains ne sont pas utiliser du tout :
2471	! dsens, devap, zxsnow, zxfluxt, zxfluxq, q2m, fluxq
2472	!
2473
2474	! Calcul de l'humidite de saturation au niveau du sol
2475
2476
2477
2478	IF (iflag_pbl/=0) THEN
2479
2480	!jyg+nrlmd<
2481	!!jyg IF (prt_level .ge. 2 .and. mod(iflag_pbl_split,2) .eq. 1) THEN
2482	IF (prt_level .ge. 2 .and. mod(iflag_pbl_split,10) .ge. 1) THEN
2483	print *,'debut du splitting de la PBL, wake_s = ', wake_s(:)
2484	print *,'debut du splitting de la PBL, wake_deltat = ', wake_deltat(:,1)
2485	print *,'debut du splitting de la PBL, wake_deltaq = ', wake_deltaq(:,1)
2486	ENDIF
2487	! !!
2488	!>jyg+nrlmd
2489	!
2490	!-------gustiness calculation-------!
2491	!ym : Warning gustiness non inialized for iflag_gusts=2 & iflag_gusts=3
2492	gustiness=0 !ym missing init
2493
2494	IF (iflag_gusts==0) THEN
2495	gustiness(1:klon)=0
2496	ELSE IF (iflag_gusts==1) THEN
2497	gustiness(1:klon)=f_gust_blale_bl(1:klon)+f_gust_wkale_wake(1:klon)
2498	ELSE IF (iflag_gusts==2) THEN
2499	gustiness(1:klon)=f_gust_blale_bl_stat(1:klon)+f_gust_wkale_wake(1:klon)
2500	! ELSE IF (iflag_gusts==2) THEN
2501	! do i = 1, klon
2502	! gustiness(i)=f_gust_blale_bl(i)+sigma_wk(i)f_gust_wk&
2503	! *ale_wake(i) !! need to make sigma_wk accessible here
2504	! enddo
2505	! ELSE IF (iflag_gusts==3) THEN
2506	! do i = 1, klon
2507	! gustiness(i)=f_gust_blalp_bl(i)+f_gust_wkalp_wake(i)
2508	! enddo
2509	ENDIF
2510
2511	CALL pbl_surface( &
2512	phys_tstep, date0, itap, days_elapsed+1, &
2513	debut, lafin, &
2514	longitude_deg, latitude_deg, rugoro, zrmu0, &
2515	zsig, sollwdown, pphi, cldt, &
2516	rain_fall, snow_fall, solsw, solswfdiff, sollw, &
2517	gustiness, &
2518	t_seri, q_seri, u_seri, v_seri, &
2519	!nrlmd+jyg<
2520	wake_deltat, wake_deltaq, wake_cstar, wake_s, &
2521	!>nrlmd+jyg
2522	pplay, paprs, pctsrf, &
2523	ftsol,SFRWL,falb_dir,falb_dif,ustar,u10m,v10m,wstar, &
2524	!albedo SB <<<
2525	cdragh, cdragm, u1, v1, &
2526	!albedo SB >>>
2527	! albsol1, albsol2, sens, evap, &
2528	albsol_dir, albsol_dif, sens, evap, &
2529	!albedo SB <<<
2530	albsol3_lic,runoff, snowhgt, qsnow, to_ice, sissnow, &
2531	zxtsol, zxfluxlat, zt2m, qsat2m, &
2532	d_t_vdf, d_q_vdf, d_u_vdf, d_v_vdf, d_t_diss, &
2533	!nrlmd<
2534	!jyg<
2535	d_t_vdf_w, d_q_vdf_w, &
2536	d_t_vdf_x, d_q_vdf_x, &
2537	sens_x, zxfluxlat_x, sens_w, zxfluxlat_w, &
2538	!>jyg
2539	delta_tsurf,wake_dens, &
2540	cdragh_x,cdragh_w,cdragm_x,cdragm_w, &
2541	kh,kh_x,kh_w, &
2542	!>nrlmd
2543	coefh(1:klon,1:klev,1:nbsrf+1), coefm(1:klon,1:klev,1:nbsrf+1), &
2544	slab_wfbils, &
2545	qsol, zq2m, s_pblh, s_lcl, &
2546	!jyg<
2547	s_pblh_x, s_lcl_x, s_pblh_w, s_lcl_w, &
2548	!>jyg
2549	s_capCL, s_oliqCL, s_cteiCL,s_pblT, &
2550	s_therm, s_trmb1, s_trmb2, s_trmb3, &
2551	zustar, zu10m, zv10m, fder, &
2552	zxqsurf, rh2m, zxfluxu, zxfluxv, &
2553	z0m, z0h, agesno, fsollw, fsolsw, &
2554	d_ts, fevap, fluxlat, t2m, &
2555	wfbils, wfbilo, wfevap, wfrain, wfsnow, &
2556	fluxt, fluxu, fluxv, &
2557	dsens, devap, zxsnow, &
2558	zxfluxt, zxfluxq, q2m, fluxq, pbl_tke, &
2559	!nrlmd+jyg<
2560	wake_delta_pbl_TKE, &
2561	!>nrlmd+jyg
2562	treedrg )
2563	!FC
2564	!
2565	! Add turbulent diffusion tendency to the wake difference variables
2566	!!jyg IF (mod(iflag_pbl_split,2) .NE. 0) THEN
2567	IF (mod(iflag_pbl_split,10) .NE. 0) THEN
2568	!jyg<
2569	d_deltat_vdf(:,:) = d_t_vdf_w(:,:)-d_t_vdf_x(:,:)
2570	d_deltaq_vdf(:,:) = d_q_vdf_w(:,:)-d_q_vdf_x(:,:)
2571	CALL add_wake_tend &
2572	(d_deltat_vdf, d_deltaq_vdf, dsig0, ddens0, ddens0, wkoccur1, 'vdf', abortphy)
2573	ELSE
2574	d_deltat_vdf(:,:) = 0.
2575	d_deltaq_vdf(:,:) = 0.
2576	!>jyg
2577	ENDIF
2578
2579	!add limitation for t,q at and wind at 10m
2580	if ( iflag_bug_t2m_ipslcm61 == 0 ) THEN
2581	CALL borne_var_surf( klon,klev,nbsrf, &
2582	iflag_bug_t2m_stab_ipslcm61, &
2583	t_seri(:,1),q_seri(:,1),u_seri(:,1),v_seri(:,1), &
2584	ftsol,zxqsurf,pctsrf,paprs, &
2585	t2m, q2m, u10m, v10m, &
2586	zt2m_cor, zq2m_cor, zu10m_cor, zv10m_cor, &
2587	zrh2m_cor, zqsat2m_cor)
2588	ELSE
2589	zt2m_cor(:)=zt2m(:)
2590	zq2m_cor(:)=zq2m(:)
2591	zu10m_cor(:)=zu10m(:)
2592	zv10m_cor(:)=zv10m(:)
2593	zqsat2m_cor=999.999
2594	ENDIF
2595
2596	!---------------------------------------------------------------------
2597	! ajout des tendances de la diffusion turbulente
2598	IF (klon_glo==1) THEN
2599	CALL add_pbl_tend &
2600	(d_u_vdf,d_v_vdf,d_t_vdf+d_t_diss,d_q_vdf,dql0,dqi0,paprs,&
2601	'vdf',abortphy,flag_inhib_tend,itap)
2602	ELSE
2603	CALL add_phys_tend &
2604	(d_u_vdf,d_v_vdf,d_t_vdf+d_t_diss,d_q_vdf,dql0,dqi0,paprs,&
2605	'vdf',abortphy,flag_inhib_tend,itap,0)
2606	ENDIF
2607	CALL prt_enerbil('vdf',itap)
2608	!--------------------------------------------------------------------
2609
2610	IF (mydebug) THEN
2611	CALL writefield_phy('u_seri',u_seri,nbp_lev)
2612	CALL writefield_phy('v_seri',v_seri,nbp_lev)
2613	CALL writefield_phy('t_seri',t_seri,nbp_lev)
2614	CALL writefield_phy('q_seri',q_seri,nbp_lev)
2615	ENDIF
2616
2617	!albedo SB >>>
2618	albsol1=0.
2619	albsol2=0.
2620	falb1=0.
2621	falb2=0.
2622	SELECT CASE(nsw)
2623	CASE(2)
2624	albsol1=albsol_dir(:,1)
2625	albsol2=albsol_dir(:,2)
2626	falb1=falb_dir(:,1,:)
2627	falb2=falb_dir(:,2,:)
2628	CASE(4)
2629	albsol1=albsol_dir(:,1)
2630	albsol2=albsol_dir(:,2)SFRWL(2)+albsol_dir(:,3)SFRWL(3) &
2631	+albsol_dir(:,4)*SFRWL(4)
2632	albsol2=albsol2/(SFRWL(2)+SFRWL(3)+SFRWL(4))
2633	falb1=falb_dir(:,1,:)
2634	falb2=falb_dir(:,2,:)SFRWL(2)+falb_dir(:,3,:)SFRWL(3) &
2635	+falb_dir(:,4,:)*SFRWL(4)
2636	falb2=falb2/(SFRWL(2)+SFRWL(3)+SFRWL(4))
2637	CASE(6)
2638	albsol1=albsol_dir(:,1)SFRWL(1)+albsol_dir(:,2)SFRWL(2) &
2639	+albsol_dir(:,3)*SFRWL(3)
2640	albsol1=albsol1/(SFRWL(1)+SFRWL(2)+SFRWL(3))
2641	albsol2=albsol_dir(:,4)SFRWL(4)+albsol_dir(:,5)SFRWL(5) &
2642	+albsol_dir(:,6)*SFRWL(6)
2643	albsol2=albsol2/(SFRWL(4)+SFRWL(5)+SFRWL(6))
2644	falb1=falb_dir(:,1,:)SFRWL(1)+falb_dir(:,2,:)SFRWL(2) &
2645	+falb_dir(:,3,:)*SFRWL(3)
2646	falb1=falb1/(SFRWL(1)+SFRWL(2)+SFRWL(3))
2647	falb2=falb_dir(:,4,:)SFRWL(4)+falb_dir(:,5,:)SFRWL(5) &
2648	+falb_dir(:,6,:)*SFRWL(6)
2649	falb2=falb2/(SFRWL(4)+SFRWL(5)+SFRWL(6))
2650	END SELECt
2651	!albedo SB <<<
2652
2653
2654	CALL evappot(klon,nbsrf,ftsol,pplay(:,1),cdragh, &
2655	t_seri(:,1),q_seri(:,1),u_seri(:,1),v_seri(:,1),evap_pot)
2656
2657	ENDIF
2658	! =================================================================== c
2659	! Calcul de Qsat
2660
2661	DO k = 1, klev
2662	DO i = 1, klon
2663	zx_t = t_seri(i,k)
2664	IF (thermcep) THEN
2665	zdelta = MAX(0.,SIGN(1.,rtt-zx_t))
2666	zx_qs = r2es * FOEEW(zx_t,zdelta)/pplay(i,k)
2667	zx_qs = MIN(0.5,zx_qs)
2668	zcor = 1./(1.-retv*zx_qs)
2669	zx_qs = zx_qs*zcor
2670	ELSE
2671	!! IF (zx_t.LT.t_coup) THEN !jyg
2672	IF (zx_t.LT.rtt) THEN !jyg
2673	zx_qs = qsats(zx_t)/pplay(i,k)
2674	ELSE
2675	zx_qs = qsatl(zx_t)/pplay(i,k)
2676	ENDIF
2677	ENDIF
2678	zqsat(i,k)=zx_qs
2679	ENDDO
2680	ENDDO
2681
2682	IF (prt_level.ge.1) THEN
2683	write(lunout,*) 'L qsat (g/kg) avant clouds_gno'
2684	write(lunout,'(i4,f15.4)') (k,1000.*zqsat(igout,k),k=1,klev)
2685	ENDIF
2686	!
2687	! Appeler la convection (au choix)
2688	!
2689	DO k = 1, klev
2690	DO i = 1, klon
2691	conv_q(i,k) = d_q_dyn(i,k) &
2692	+ d_q_vdf(i,k)/phys_tstep
2693	conv_t(i,k) = d_t_dyn(i,k) &
2694	+ d_t_vdf(i,k)/phys_tstep
2695	ENDDO
2696	ENDDO
2697	IF (check) THEN
2698	za = qcheck(klon,klev,paprs,q_seri,ql_seri,cell_area)
2699	WRITE(lunout,*) "avantcon=", za
2700	ENDIF
2701	zx_ajustq = .FALSE.
2702	IF (iflag_con.EQ.2) zx_ajustq=.TRUE.
2703	IF (zx_ajustq) THEN
2704	DO i = 1, klon
2705	z_avant(i) = 0.0
2706	ENDDO
2707	DO k = 1, klev
2708	DO i = 1, klon
2709	z_avant(i) = z_avant(i) + (q_seri(i,k)+ql_seri(i,k)) &
2710	*(paprs(i,k)-paprs(i,k+1))/RG
2711	ENDDO
2712	ENDDO
2713	ENDIF
2714
2715	! Calcule de vitesse verticale a partir de flux de masse verticale
2716	DO k = 1, klev
2717	DO i = 1, klon
2718	omega(i,k) = RG*flxmass_w(i,k) / cell_area(i)
2719	ENDDO
2720	ENDDO
2721
2722	IF (prt_level.ge.1) write(lunout,*) 'omega(igout, :) = ', &
2723	omega(igout, :)
2724	!
2725	! Appel de la convection tous les "cvpas"
2726	!
2727	!!jyg IF (MOD(itapcv,cvpas).EQ.0) THEN
2728	!! print *,' physiq : itapcv, cvpas, itap-1, cvpas_0 ', &
2729	!! itapcv, cvpas, itap-1, cvpas_0
2730	IF (MOD(itapcv,cvpas).EQ.0 .OR. MOD(itap-1,cvpas_0).EQ.0) THEN
2731
2732	!
2733	! Mettre a zero des variables de sortie (pour securite)
2734	!
2735	pmflxr(:,:) = 0.
2736	pmflxs(:,:) = 0.
2737	wdtrainA(:,:) = 0.
2738	wdtrainS(:,:) = 0.
2739	wdtrainM(:,:) = 0.
2740	upwd(:,:) = 0.
2741	dnwd(:,:) = 0.
2742	ep(:,:) = 0.
2743	da(:,:)=0.
2744	mp(:,:)=0.
2745	wght_cvfd(:,:)=0.
2746	phi(:,:,:)=0.
2747	phi2(:,:,:)=0.
2748	epmlmMm(:,:,:)=0.
2749	eplaMm(:,:)=0.
2750	d1a(:,:)=0.
2751	dam(:,:)=0.
2752	elij(:,:,:)=0.
2753	ev(:,:)=0.
2754	qtaa(:,:)=0.
2755	clw(:,:)=0.
2756	sij(:,:,:)=0.
2757	!
2758	IF (iflag_con.EQ.1) THEN
2759	abort_message ='reactiver le call conlmd dans physiq.F'
2760	CALL abort_physic (modname,abort_message,1)
2761	! CALL conlmd (phys_tstep, paprs, pplay, t_seri, q_seri, conv_q,
2762	! . d_t_con, d_q_con,
2763	! . rain_con, snow_con, ibas_con, itop_con)
2764	ELSE IF (iflag_con.EQ.2) THEN
2765	CALL conflx(phys_tstep, paprs, pplay, t_seri, q_seri, &
2766	conv_t, conv_q, -evap, omega, &
2767	d_t_con, d_q_con, rain_con, snow_con, &
2768	pmfu, pmfd, pen_u, pde_u, pen_d, pde_d, &
2769	kcbot, kctop, kdtop, pmflxr, pmflxs)
2770	d_u_con = 0.
2771	d_v_con = 0.
2772
2773	WHERE (rain_con < 0.) rain_con = 0.
2774	WHERE (snow_con < 0.) snow_con = 0.
2775	DO i = 1, klon
2776	ibas_con(i) = klev+1 - kcbot(i)
2777	itop_con(i) = klev+1 - kctop(i)
2778	ENDDO
2779	ELSE IF (iflag_con.GE.3) THEN
2780	! nb of tracers for the KE convection:
2781	! MAF la partie traceurs est faite dans phytrac
2782	! on met ntra=1 pour limiter les appels mais on peut
2783	! supprimer les calculs / ftra.
2784	ntra = 1
2785
2786	!=======================================================================
2787	!ajout pour la parametrisation des poches froides: calcul de
2788	!t_w et t_x: si pas de poches froides, t_w=t_x=t_seri
2789	IF (iflag_wake>=1) THEN
2790	DO k=1,klev
2791	DO i=1,klon
2792	t_w(i,k) = t_seri(i,k) + (1-wake_s(i))*wake_deltat(i,k)
2793	q_w(i,k) = q_seri(i,k) + (1-wake_s(i))*wake_deltaq(i,k)
2794	t_x(i,k) = t_seri(i,k) - wake_s(i)*wake_deltat(i,k)
2795	q_x(i,k) = q_seri(i,k) - wake_s(i)*wake_deltaq(i,k)
2796	ENDDO
2797	ENDDO
2798	ELSE
2799	t_w(:,:) = t_seri(:,:)
2800	q_w(:,:) = q_seri(:,:)
2801	t_x(:,:) = t_seri(:,:)
2802	q_x(:,:) = q_seri(:,:)
2803	ENDIF
2804	!
2805	!jyg<
2806	! Perform dry adiabatic adjustment on wake profile
2807	! The corresponding tendencies are added to the convective tendencies
2808	! after the call to the convective scheme.
2809	IF (iflag_wake>=1) then
2810	IF (iflag_adjwk >= 1) THEN
2811	limbas(:) = 1
2812	CALL ajsec(paprs, pplay, t_w, q_w, limbas, &
2813	d_t_adjwk, d_q_adjwk)
2814	!
2815	DO k=1,klev
2816	DO i=1,klon
2817	IF (wake_s(i) .GT. 1.e-3) THEN
2818	t_w(i,k) = t_w(i,k) + d_t_adjwk(i,k)
2819	q_w(i,k) = q_w(i,k) + d_q_adjwk(i,k)
2820	d_deltat_ajs_cv(i,k) = d_t_adjwk(i,k)
2821	d_deltaq_ajs_cv(i,k) = d_q_adjwk(i,k)
2822	ELSE
2823	d_deltat_ajs_cv(i,k) = 0.
2824	d_deltaq_ajs_cv(i,k) = 0.
2825	ENDIF
2826	ENDDO
2827	ENDDO
2828	IF (iflag_adjwk == 2) THEN
2829	CALL add_wake_tend &
2830	(d_deltat_ajs_cv, d_deltaq_ajs_cv, dsig0, ddens0, ddens0, wkoccur1, 'ajs_cv', abortphy)
2831	ENDIF ! (iflag_adjwk == 2)
2832	ENDIF ! (iflag_adjwk >= 1)
2833	ENDIF ! (iflag_wake>=1)
2834	!>jyg
2835	!
2836
2837	!! print *,'physiq. q_w(1,k), q_x(1,k) ', &
2838	!! (k, q_w(1,k), q_x(1,k),k=1,25)
2839
2840	!jyg<
2841	CALL alpale( debut, itap, phys_tstep, paprs, omega, t_seri, &
2842	alp_offset, it_wape_prescr, wape_prescr, fip_prescr, &
2843	ale_bl_prescr, alp_bl_prescr, &
2844	wake_pe, wake_fip, &
2845	Ale_bl, Ale_bl_trig, Alp_bl, &
2846	Ale, Alp , Ale_wake, Alp_wake)
2847	!>jyg
2848	!
2849	! sb, oct02:
2850	! Schema de convection modularise et vectorise:
2851	! (driver commun aux versions 3 et 4)
2852	!
2853	IF (ok_cvl) THEN ! new driver for convectL
2854	!
2855	!jyg<
2856	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
2857	! Calculate the upmost level of deep convection loops: k_upper_cv
2858	! (near 22 km)
2859	k_upper_cv = klev
2860	!izero = klon/2+1/klon
2861	!DO k = klev,1,-1
2862	! IF (pphi(izero,k) > 22.e4) k_upper_cv = k
2863	!ENDDO
2864	! FH : nouveau calcul base sur un profil global sans quoi
2865	! le modele etait sensible au decoupage de domaines
2866	DO k = klev,1,-1
2867	IF (-7*log(presnivs(k)/presnivs(1)) > 25.) k_upper_cv = k
2868	ENDDO
2869	IF (prt_level .ge. 5) THEN
2870	Print *, 'upmost level of deep convection loops: k_upper_cv = ', &
2871	k_upper_cv
2872	ENDIF
2873	!
2874	!>jyg
2875	IF (type_trac == 'repr') THEN
2876	nbtr_tmp=ntra
2877	ELSE
2878	nbtr_tmp=nbtr
2879	ENDIF
2880	!jyg iflag_con est dans clesphys
2881	!c CALL concvl (iflag_con,iflag_clos,
2882	CALL concvl (iflag_clos, &
2883	phys_tstep, paprs, pplay, k_upper_cv, t_x,q_x, &
2884	t_w,q_w,wake_s, &
2885	u_seri,v_seri,tr_seri,nbtr_tmp, &
2886	ALE,ALP, &
2887	sig1,w01, &
2888	d_t_con,d_q_con,d_u_con,d_v_con,d_tr, &
2889	rain_con, snow_con, ibas_con, itop_con, sigd, &
2890	ema_cbmf,plcl,plfc,wbeff,convoccur,upwd,dnwd,dnwd0, &
2891	Ma,mipsh,Vprecip,cape,cin,tvp,Tconv,iflagctrl, &
2892	pbase,bbase,dtvpdt1,dtvpdq1,dplcldt,dplcldr,qcondc,wd, &
2893	! RomP >>>
2894	!! . pmflxr,pmflxs,da,phi,mp,
2895	!! . ftd,fqd,lalim_conv,wght_th)
2896	pmflxr,pmflxs,da,phi,mp,phi2,d1a,dam,sij,qtaa,clw,elij, &
2897	ftd,fqd,lalim_conv,wght_th, &
2898	ev, ep,epmlmMm,eplaMm, &
2899	wdtrainA, wdtrainS, wdtrainM,wght_cvfd,qtc_cv,sigt_cv, &
2900	tau_cld_cv,coefw_cld_cv,epmax_diag)
2901
2902	! RomP <<<
2903
2904	!IM begin
2905	! print*,'physiq: cin pbase dnwd0 ftd fqd ',cin(1),pbase(1),
2906	! .dnwd0(1,1),ftd(1,1),fqd(1,1)
2907	!IM end
2908	!IM cf. FH
2909	clwcon0=qcondc
2910	pmfu(:,:)=upwd(:,:)+dnwd(:,:)
2911	!
2912	!jyg<
2913	! If convective tendencies are too large, then call convection
2914	! every time step
2915	cvpas = cvpas_0
2916	DO k=1,k_upper_cv
2917	DO i=1,klon
2918	IF (d_t_con(i,k) > 6.721 .AND. d_t_con(i,k) < 6.722 .AND.&
2919	d_q_con(i,k) > -.0002171 .AND. d_q_con(i,k) < -.0002170) THEN
2920	dtcon_multistep_max = 3.
2921	dqcon_multistep_max = 0.02
2922	ENDIF
2923	ENDDO
2924	ENDDO
2925	!
2926	DO k=1,k_upper_cv
2927	DO i=1,klon
2928	!! IF (abs(d_t_con(i,k)) > 0.24 .OR. &
2929	!! abs(d_q_con(i,k)) > 2.e-2) THEN
2930	IF (abs(d_t_con(i,k)) > dtcon_multistep_max .OR. &
2931	abs(d_q_con(i,k)) > dqcon_multistep_max) THEN
2932	cvpas = 1
2933	!! print *,'physiq1, i,k,d_t_con(i,k),d_q_con(i,k) ', &
2934	!! i,k,d_t_con(i,k),d_q_con(i,k)
2935	ENDIF
2936	ENDDO
2937	ENDDO
2938	!!! Ligne a ne surtout pas remettre sans avoir murement reflechi (jyg)
2939	!!! call bcast(cvpas)
2940	!!! ------------------------------------------------------------
2941	!>jyg
2942	!
2943	DO i = 1, klon
2944	IF (iflagctrl(i).le.1) itau_con(i)=itau_con(i)+cvpas
2945	ENDDO
2946	!
2947	!jyg<
2948	! Add the tendency due to the dry adjustment of the wake profile
2949	IF (iflag_wake>=1) THEN
2950	IF (iflag_adjwk == 2) THEN
2951	DO k=1,klev
2952	DO i=1,klon
2953	ftd(i,k) = ftd(i,k) + wake_s(i)*d_t_adjwk(i,k)/phys_tstep
2954	fqd(i,k) = fqd(i,k) + wake_s(i)*d_q_adjwk(i,k)/phys_tstep
2955	d_t_con(i,k) = d_t_con(i,k) + wake_s(i)*d_t_adjwk(i,k)
2956	d_q_con(i,k) = d_q_con(i,k) + wake_s(i)*d_q_adjwk(i,k)
2957	ENDDO
2958	ENDDO
2959	ENDIF ! (iflag_adjwk = 2)
2960	ENDIF ! (iflag_wake>=1)
2961	!>jyg
2962	!
2963	ELSE ! ok_cvl
2964
2965	! MAF conema3 ne contient pas les traceurs
2966	CALL conema3 (phys_tstep, &
2967	paprs,pplay,t_seri,q_seri, &
2968	u_seri,v_seri,tr_seri,ntra, &
2969	sig1,w01, &
2970	d_t_con,d_q_con,d_u_con,d_v_con,d_tr, &
2971	rain_con, snow_con, ibas_con, itop_con, &
2972	upwd,dnwd,dnwd0,bas,top, &
2973	Ma,cape,tvp,rflag, &
2974	pbase &
2975	,bbase,dtvpdt1,dtvpdq1,dplcldt,dplcldr &
2976	,clwcon0)
2977
2978	ENDIF ! ok_cvl
2979
2980	!
2981	! Correction precip
2982	rain_con = rain_con * cvl_corr
2983	snow_con = snow_con * cvl_corr
2984	!
2985
2986	IF (.NOT. ok_gust) THEN
2987	do i = 1, klon
2988	wd(i)=0.0
2989	enddo
2990	ENDIF
2991
2992	! =================================================================== c
2993	! Calcul des proprietes des nuages convectifs
2994	!
2995
2996	! calcul des proprietes des nuages convectifs
2997	clwcon0(:,:)=fact_cldcon*clwcon0(:,:)
2998	IF (iflag_cld_cv == 0) THEN
2999	CALL clouds_gno &
3000	(klon,klev,q_seri,zqsat,clwcon0,ptconv,ratqsc,rnebcon0)
3001	ELSE
3002	CALL clouds_bigauss &
3003	(klon,klev,q_seri,zqsat,qtc_cv,sigt_cv,ptconv,ratqsc,rnebcon0)
3004	ENDIF
3005
3006
3007	! =================================================================== c
3008
3009	DO i = 1, klon
3010	itop_con(i) = min(max(itop_con(i),1),klev)
3011	ibas_con(i) = min(max(ibas_con(i),1),itop_con(i))
3012	ENDDO
3013
3014	DO i = 1, klon
3015	ema_pcb(i) = paprs(i,ibas_con(i))
3016	ENDDO
3017	DO i = 1, klon
3018	! L'idicage de itop_con peut cacher un pb potentiel
3019	! FH sous la dictee de JYG, CR
3020	ema_pct(i) = paprs(i,itop_con(i)+1)
3021
3022	IF (itop_con(i).gt.klev-3) THEN
3023	IF (prt_level >= 9) THEN
3024	write(lunout,*)'La convection monte trop haut '
3025	write(lunout,*)'itop_con(,',i,',)=',itop_con(i)
3026	ENDIF
3027	ENDIF
3028	ENDDO
3029	ELSE IF (iflag_con.eq.0) THEN
3030	write(lunout,*) 'On n appelle pas la convection'
3031	clwcon0=0.
3032	rnebcon0=0.
3033	d_t_con=0.
3034	d_q_con=0.
3035	d_u_con=0.
3036	d_v_con=0.
3037	rain_con=0.
3038	snow_con=0.
3039	bas=1
3040	top=1
3041	ELSE
3042	WRITE(lunout,*) "iflag_con non-prevu", iflag_con
3043	CALL abort_physic("physiq", "", 1)
3044	ENDIF
3045
3046	! CALL homogene(paprs, q_seri, d_q_con, u_seri,v_seri,
3047	! . d_u_con, d_v_con)
3048
3049	!jyg Reinitialize proba_notrig and itapcv when convection has been called
3050	proba_notrig(:) = 1.
3051	itapcv = 0
3052	ENDIF ! (MOD(itapcv,cvpas).EQ.0 .OR. MOD(itapcv,cvpas_0).EQ.0)
3053	!
3054	itapcv = itapcv+1
3055	!
3056	! Compter les steps ou cvpas=1
3057	IF (cvpas == 1) THEN
3058	Ncvpaseq1 = Ncvpaseq1+1
3059	ENDIF
3060	IF (mod(itap,1000) == 0) THEN
3061	print *,' physiq, nombre de steps ou cvpas = 1 : ', Ncvpaseq1
3062	ENDIF
3063
3064	!!!jyg Appel diagnostique a add_phys_tend pour tester la conservation de
3065	!!! l'energie dans les courants satures.
3066	!! d_t_con_sat(:,:) = d_t_con(:,:) - ftd(:,:)*dtime
3067	!! d_q_con_sat(:,:) = d_q_con(:,:) - fqd(:,:)*dtime
3068	!! dql_sat(:,:) = (wdtrainA(:,:)+wdtrainM(:,:))*dtime/zmasse(:,:)
3069	!! CALL add_phys_tend(d_u_con, d_v_con, d_t_con_sat, d_q_con_sat, dql_sat, &
3070	!! dqi0, paprs, 'convection_sat', abortphy, flag_inhib_tend,&
3071	!! itap, 1)
3072	!! call prt_enerbil('convection_sat',itap)
3073	!!
3074	!!
3075	CALL add_phys_tend(d_u_con, d_v_con, d_t_con, d_q_con, dql0, dqi0, paprs, &
3076	'convection',abortphy,flag_inhib_tend,itap,0)
3077	CALL prt_enerbil('convection',itap)
3078
3079	!-------------------------------------------------------------------------
3080
3081	IF (mydebug) THEN
3082	CALL writefield_phy('u_seri',u_seri,nbp_lev)
3083	CALL writefield_phy('v_seri',v_seri,nbp_lev)
3084	CALL writefield_phy('t_seri',t_seri,nbp_lev)
3085	CALL writefield_phy('q_seri',q_seri,nbp_lev)
3086	ENDIF
3087
3088	IF (check) THEN
3089	za = qcheck(klon,klev,paprs,q_seri,ql_seri,cell_area)
3090	WRITE(lunout,*)"aprescon=", za
3091	zx_t = 0.0
3092	za = 0.0
3093	DO i = 1, klon
3094	za = za + cell_area(i)/REAL(klon)
3095	zx_t = zx_t + (rain_con(i)+ &
3096	snow_con(i))*cell_area(i)/REAL(klon)
3097	ENDDO
3098	zx_t = zx_t/za*phys_tstep
3099	WRITE(lunout,*)"Precip=", zx_t
3100	ENDIF
3101	IF (zx_ajustq) THEN
3102	DO i = 1, klon
3103	z_apres(i) = 0.0
3104	ENDDO
3105	DO k = 1, klev
3106	DO i = 1, klon
3107	z_apres(i) = z_apres(i) + (q_seri(i,k)+ql_seri(i,k)) &
3108	*(paprs(i,k)-paprs(i,k+1))/RG
3109	ENDDO
3110	ENDDO
3111	DO i = 1, klon
3112	z_factor(i) = (z_avant(i)-(rain_con(i)+snow_con(i))*phys_tstep) &
3113	/z_apres(i)
3114	ENDDO
3115	DO k = 1, klev
3116	DO i = 1, klon
3117	IF (z_factor(i).GT.(1.0+1.0E-08) .OR. &
3118	z_factor(i).LT.(1.0-1.0E-08)) THEN
3119	q_seri(i,k) = q_seri(i,k) * z_factor(i)
3120	ENDIF
3121	ENDDO
3122	ENDDO
3123	ENDIF
3124	zx_ajustq=.FALSE.
3125
3126	!
3127	!==========================================================================
3128	!RR:Evolution de la poche froide: on ne fait pas de separation wake/env
3129	!pour la couche limite diffuse pour l instant
3130	!
3131	!
3132	! nrlmd le 22/03/2011---Si on met les poches hors des thermiques
3133	! il faut rajouter cette tendance calcul\'ee hors des poches
3134	! froides
3135	!
3136	IF (iflag_wake>=1) THEN
3137	!
3138	!
3139	! Call wakes every "wkpas" step
3140	!
3141	IF (MOD(itapwk,wkpas).EQ.0) THEN
3142	!
3143	DO k=1,klev
3144	DO i=1,klon
3145	dt_dwn(i,k) = ftd(i,k)
3146	dq_dwn(i,k) = fqd(i,k)
3147	M_dwn(i,k) = dnwd0(i,k)
3148	M_up(i,k) = upwd(i,k)
3149	dt_a(i,k) = d_t_con(i,k)/phys_tstep - ftd(i,k)
3150	dq_a(i,k) = d_q_con(i,k)/phys_tstep - fqd(i,k)
3151	ENDDO
3152	ENDDO
3153
3154	IF (iflag_wake==2) THEN
3155	ok_wk_lsp(:)=max(sign(1.,wake_s(:)-wake_s_min_lsp),0.)
3156	DO k = 1,klev
3157	dt_dwn(:,k)= dt_dwn(:,k)+ &
3158	ok_wk_lsp(:)*(d_t_eva(:,k)+d_t_lsc(:,k))/phys_tstep
3159	dq_dwn(:,k)= dq_dwn(:,k)+ &
3160	ok_wk_lsp(:)*(d_q_eva(:,k)+d_q_lsc(:,k))/phys_tstep
3161	ENDDO
3162	ELSEIF (iflag_wake==3) THEN
3163	ok_wk_lsp(:)=max(sign(1.,wake_s(:)-wake_s_min_lsp),0.)
3164	DO k = 1,klev
3165	DO i=1,klon
3166	IF (rneb(i,k)==0.) THEN
3167	! On ne tient compte des tendances qu'en dehors des
3168	! nuages (c'est-\`a-dire a priri dans une region ou
3169	! l'eau se reevapore).
3170	dt_dwn(i,k)= dt_dwn(i,k)+ &
3171	ok_wk_lsp(i)*d_t_lsc(i,k)/phys_tstep
3172	dq_dwn(i,k)= dq_dwn(i,k)+ &
3173	ok_wk_lsp(i)*d_q_lsc(i,k)/phys_tstep
3174	ENDIF
3175	ENDDO
3176	ENDDO
3177	ENDIF
3178
3179	!
3180	!calcul caracteristiques de la poche froide
3181	CALL calWAKE (iflag_wake_tend, paprs, pplay, phys_tstep, &
3182	t_seri, q_seri, omega, &
3183	dt_dwn, dq_dwn, M_dwn, M_up, &
3184	dt_a, dq_a, cv_gen, &
3185	sigd, cin, &
3186	wake_deltat, wake_deltaq, wake_s, awake_dens, wake_dens, &
3187	wake_dth, wake_h, &
3188	!! wake_pe, wake_fip, wake_gfl, &
3189	wake_pe, wake_fip_0, wake_gfl, & !! jyg
3190	d_t_wake, d_q_wake, &
3191	wake_k, t_x, q_x, &
3192	wake_omgbdth, wake_dp_omgb, &
3193	wake_dtKE, wake_dqKE, &
3194	wake_omg, wake_dp_deltomg, &
3195	wake_spread, wake_Cstar, d_deltat_wk_gw, &
3196	d_deltat_wk, d_deltaq_wk, d_s_wk, d_dens_a_wk, d_dens_wk)
3197	!
3198	!jyg Reinitialize itapwk when wakes have been called
3199	itapwk = 0
3200	ENDIF ! (MOD(itapwk,wkpas).EQ.0)
3201	!
3202	itapwk = itapwk+1
3203	!
3204	!-----------------------------------------------------------------------
3205	! ajout des tendances des poches froides
3206	CALL add_phys_tend(du0,dv0,d_t_wake,d_q_wake,dql0,dqi0,paprs,'wake', &
3207	abortphy,flag_inhib_tend,itap,0)
3208	CALL prt_enerbil('wake',itap)
3209	!------------------------------------------------------------------------
3210
3211	! Increment Wake state variables
3212	IF (iflag_wake_tend .GT. 0.) THEN
3213
3214	CALL add_wake_tend &
3215	(d_deltat_wk, d_deltaq_wk, d_s_wk, d_dens_a_wk, d_dens_wk, wake_k, &
3216	'wake', abortphy)
3217	CALL prt_enerbil('wake',itap)
3218	ENDIF ! (iflag_wake_tend .GT. 0.)
3219	!
3220	IF (prt_level .GE. 10) THEN
3221	print *,' physiq, after calwake, wake_s: ',wake_s(:)
3222	print *,' physiq, after calwake, wake_deltat: ',wake_deltat(:,1)
3223	print *,' physiq, after calwake, wake_deltaq: ',wake_deltaq(:,1)
3224	ENDIF
3225
3226	IF (iflag_alp_wk_cond .GT. 0.) THEN
3227
3228	CALL alpale_wk(phys_tstep, cell_area, wake_k, wake_s, wake_dens, wake_fip_0, &
3229	wake_fip)
3230	ELSE
3231	wake_fip(:) = wake_fip_0(:)
3232	ENDIF ! (iflag_alp_wk_cond .GT. 0.)
3233
3234	ENDIF ! (iflag_wake>=1)
3235	!
3236	!===================================================================
3237	! Convection seche (thermiques ou ajustement)
3238	!===================================================================
3239	!
3240	CALL stratocu_if(klon,klev,pctsrf,paprs, pplay,t_seri &
3241	,seuil_inversion,weak_inversion,dthmin)
3242
3243
3244
3245	d_t_ajsb(:,:)=0.
3246	d_q_ajsb(:,:)=0.
3247	d_t_ajs(:,:)=0.
3248	d_u_ajs(:,:)=0.
3249	d_v_ajs(:,:)=0.
3250	d_q_ajs(:,:)=0.
3251	clwcon0th(:,:)=0.
3252	!
3253	! fm_therm(:,:)=0.
3254	! entr_therm(:,:)=0.
3255	! detr_therm(:,:)=0.
3256	!
3257	IF (prt_level>9) WRITE(lunout,*) &
3258	'AVANT LA CONVECTION SECHE , iflag_thermals=' &
3259	,iflag_thermals,' nsplit_thermals=',nsplit_thermals
3260	IF (iflag_thermals<0) THEN
3261	! Rien
3262	! ====
3263	IF (prt_level>9) WRITE(lunout,*)'pas de convection seche'
3264
3265
3266	ELSE
3267
3268	! Thermiques
3269	! ==========
3270	IF (prt_level>9) WRITE(lunout,*)'JUSTE AVANT , iflag_thermals=' &
3271	,iflag_thermals,' nsplit_thermals=',nsplit_thermals
3272
3273
3274	!cc nrlmd le 10/04/2012
3275	DO k=1,klev+1
3276	DO i=1,klon
3277	pbl_tke_input(i,k,is_oce)=pbl_tke(i,k,is_oce)
3278	pbl_tke_input(i,k,is_ter)=pbl_tke(i,k,is_ter)
3279	pbl_tke_input(i,k,is_lic)=pbl_tke(i,k,is_lic)
3280	pbl_tke_input(i,k,is_sic)=pbl_tke(i,k,is_sic)
3281	ENDDO
3282	ENDDO
3283	!cc fin nrlmd le 10/04/2012
3284
3285	IF (iflag_thermals>=1) THEN
3286	!jyg<
3287	!! IF (mod(iflag_pbl_split/2,2) .EQ. 1) THEN
3288	IF (mod(iflag_pbl_split/10,10) .GE. 1) THEN
3289	! Appel des thermiques avec les profils exterieurs aux poches
3290	DO k=1,klev
3291	DO i=1,klon
3292	t_therm(i,k) = t_seri(i,k) - wake_s(i)*wake_deltat(i,k)
3293	q_therm(i,k) = q_seri(i,k) - wake_s(i)*wake_deltaq(i,k)
3294	u_therm(i,k) = u_seri(i,k)
3295	v_therm(i,k) = v_seri(i,k)
3296	ENDDO
3297	ENDDO
3298	ELSE
3299	! Appel des thermiques avec les profils moyens
3300	DO k=1,klev
3301	DO i=1,klon
3302	t_therm(i,k) = t_seri(i,k)
3303	q_therm(i,k) = q_seri(i,k)
3304	u_therm(i,k) = u_seri(i,k)
3305	v_therm(i,k) = v_seri(i,k)
3306	ENDDO
3307	ENDDO
3308	ENDIF
3309	!>jyg
3310	CALL calltherm(pdtphys &
3311	,pplay,paprs,pphi,weak_inversion &
3312	! ,u_seri,v_seri,t_seri,q_seri,zqsat,debut & !jyg
3313	,u_therm,v_therm,t_therm,q_therm,zqsat,debut & !jyg
3314	,d_u_ajs,d_v_ajs,d_t_ajs,d_q_ajs &
3315	,fm_therm,entr_therm,detr_therm &
3316	,zqasc,clwcon0th,lmax_th,ratqscth &
3317	,ratqsdiff,zqsatth &
3318	!on rajoute ale et alp, et les
3319	!caracteristiques de la couche alim
3320	,Ale_bl,Alp_bl,lalim_conv,wght_th, zmax0, f0, zw2,fraca &
3321	,ztv,zpspsk,ztla,zthl &
3322	!cc nrlmd le 10/04/2012
3323	,pbl_tke_input,pctsrf,omega,cell_area &
3324	,zlcl_th,fraca0,w0,w_conv,therm_tke_max0,env_tke_max0 &
3325	,n2,s2,ale_bl_stat &
3326	,therm_tke_max,env_tke_max &
3327	,alp_bl_det,alp_bl_fluct_m,alp_bl_fluct_tke &
3328	,alp_bl_conv,alp_bl_stat &
3329	!cc fin nrlmd le 10/04/2012
3330	,zqla,ztva )
3331	!
3332	!jyg<
3333	!!jyg IF (mod(iflag_pbl_split/2,2) .EQ. 1) THEN
3334	IF (mod(iflag_pbl_split/10,10) .GE. 1) THEN
3335	! Si les thermiques ne sont presents que hors des
3336	! poches, la tendance moyenne associ\'ee doit etre
3337	! multipliee par la fraction surfacique qu'ils couvrent.
3338	DO k=1,klev
3339	DO i=1,klon
3340	!
3341	d_deltat_the(i,k) = - d_t_ajs(i,k)
3342	d_deltaq_the(i,k) = - d_q_ajs(i,k)
3343	!
3344	d_u_ajs(i,k) = d_u_ajs(i,k)*(1.-wake_s(i))
3345	d_v_ajs(i,k) = d_v_ajs(i,k)*(1.-wake_s(i))
3346	d_t_ajs(i,k) = d_t_ajs(i,k)*(1.-wake_s(i))
3347	d_q_ajs(i,k) = d_q_ajs(i,k)*(1.-wake_s(i))
3348	!
3349	ENDDO
3350	ENDDO
3351	!
3352	IF (ok_bug_split_th) THEN
3353	CALL add_wake_tend &
3354	(d_deltat_the, d_deltaq_the, dsig0, ddens0, ddens0, wkoccur1, 'the', abortphy)
3355	ELSE
3356	CALL add_wake_tend &
3357	(d_deltat_the, d_deltaq_the, dsig0, ddens0, ddens0, wake_k, 'the', abortphy)
3358	ENDIF
3359	CALL prt_enerbil('the',itap)
3360	!
3361	ENDIF ! (mod(iflag_pbl_split/10,10) .GE. 1)
3362	!
3363	CALL add_phys_tend(d_u_ajs,d_v_ajs,d_t_ajs,d_q_ajs, &
3364	dql0,dqi0,paprs,'thermals', abortphy,flag_inhib_tend,itap,0)
3365	CALL prt_enerbil('thermals',itap)
3366	!
3367	!
3368	CALL alpale_th( phys_tstep, lmax_th, t_seri, cell_area, &
3369	cin, s2, n2, &
3370	ale_bl_trig, ale_bl_stat, ale_bl, &
3371	alp_bl, alp_bl_stat, &
3372	proba_notrig, random_notrig, cv_gen)
3373	!>jyg
3374
3375	! ------------------------------------------------------------------
3376	! Transport de la TKE par les panaches thermiques.
3377	! FH : 2010/02/01
3378	! if (iflag_pbl.eq.10) then
3379	! call thermcell_dtke(klon,klev,nbsrf,pdtphys,fm_therm,entr_therm,
3380	! s rg,paprs,pbl_tke)
3381	! endif
3382	! -------------------------------------------------------------------
3383
3384	DO i=1,klon
3385	! zmax_th(i)=pphi(i,lmax_th(i))/rg
3386	!CR:04/05/12:correction calcul zmax
3387	zmax_th(i)=zmax0(i)
3388	ENDDO
3389
3390	ENDIF
3391
3392	! Ajustement sec
3393	! ==============
3394
3395	! Dans le cas o\`u on active les thermiques, on fait partir l'ajustement
3396	! a partir du sommet des thermiques.
3397	! Dans le cas contraire, on demarre au niveau 1.
3398
3399	IF (iflag_thermals>=13.or.iflag_thermals<=0) THEN
3400
3401	IF (iflag_thermals.eq.0) THEN
3402	IF (prt_level>9) WRITE(lunout,*)'ajsec'
3403	limbas(:)=1
3404	ELSE
3405	limbas(:)=lmax_th(:)
3406	ENDIF
3407
3408	! Attention : le call ajsec_convV2 n'est maintenu que momentanneement
3409	! pour des test de convergence numerique.
3410	! Le nouveau ajsec est a priori mieux, meme pour le cas
3411	! iflag_thermals = 0 (l'ancienne version peut faire des tendances
3412	! non nulles numeriquement pour des mailles non concernees.
3413
3414	IF (iflag_thermals==0) THEN
3415	! Calling adjustment alone (but not the thermal plume model)
3416	CALL ajsec_convV2(paprs, pplay, t_seri,q_seri &
3417	, d_t_ajsb, d_q_ajsb)
3418	ELSE IF (iflag_thermals>0) THEN
3419	! Calling adjustment above the top of thermal plumes
3420	CALL ajsec(paprs, pplay, t_seri,q_seri,limbas &
3421	, d_t_ajsb, d_q_ajsb)
3422	ENDIF
3423
3424	!--------------------------------------------------------------------
3425	! ajout des tendances de l'ajustement sec ou des thermiques
3426	CALL add_phys_tend(du0,dv0,d_t_ajsb,d_q_ajsb,dql0,dqi0,paprs, &
3427	'ajsb',abortphy,flag_inhib_tend,itap,0)
3428	CALL prt_enerbil('ajsb',itap)
3429	d_t_ajs(:,:)=d_t_ajs(:,:)+d_t_ajsb(:,:)
3430	d_q_ajs(:,:)=d_q_ajs(:,:)+d_q_ajsb(:,:)
3431
3432	!---------------------------------------------------------------------
3433
3434	ENDIF
3435
3436	ENDIF
3437	!
3438	!===================================================================
3439	! Computation of ratqs, the width (normalized) of the subrid scale
3440	! water distribution
3441	CALL calcratqs(klon,klev,prt_level,lunout, &
3442	iflag_ratqs,iflag_con,iflag_cld_th,pdtphys, &
3443	ratqsbas,ratqshaut,ratqsp0, ratqsdp, &
3444	tau_ratqs,fact_cldcon, &
3445	ptconv,ptconvth,clwcon0th, rnebcon0th, &
3446	paprs,pplay,q_seri,zqsat,fm_therm, &
3447	ratqs,ratqsc)
3448
3449
3450	!
3451	! Appeler le processus de condensation a grande echelle
3452	! et le processus de precipitation
3453	!-------------------------------------------------------------------------
3454	IF (prt_level .GE.10) THEN
3455	print *,'itap, ->fisrtilp ',itap
3456	ENDIF
3457	!
3458	CALL fisrtilp(phys_tstep,paprs,pplay, &
3459	t_seri, q_seri,ptconv,ratqs, &
3460	d_t_lsc, d_q_lsc, d_ql_lsc, d_qi_lsc, rneb, cldliq, &
3461	rain_lsc, snow_lsc, &
3462	pfrac_impa, pfrac_nucl, pfrac_1nucl, &
3463	frac_impa, frac_nucl, beta_prec_fisrt, &
3464	prfl, psfl, rhcl, &
3465	zqasc, fraca,ztv,zpspsk,ztla,zthl,iflag_cld_th, &
3466	iflag_ice_thermo)
3467	!
3468	WHERE (rain_lsc < 0) rain_lsc = 0.
3469	WHERE (snow_lsc < 0) snow_lsc = 0.
3470
3471	!+JLD
3472	! write(*,9000) 'phys lsc',"enerbil: bil_q, bil_e,",rain_lsc+snow_lsc &
3473	! & ,((rcw-rcpd)rain_lsc + (rcs-rcpd)snow_lsc)t_seri(1,1)-rlvttrain_lsc+rlstt*snow_lsc &
3474	! & ,rain_lsc,snow_lsc
3475	! write(*,9000) "rcpv","rcw",rcpv,rcw,rcs,t_seri(1,1)
3476	!-JLD
3477	CALL add_phys_tend(du0,dv0,d_t_lsc,d_q_lsc,d_ql_lsc,d_qi_lsc,paprs, &
3478	'lsc',abortphy,flag_inhib_tend,itap,0)
3479	CALL prt_enerbil('lsc',itap)
3480	rain_num(:)=0.
3481	DO k = 1, klev
3482	DO i = 1, klon
3483	IF (ql_seri(i,k)>oliqmax) THEN
3484	rain_num(i)=rain_num(i)+(ql_seri(i,k)-oliqmax)*zmasse(i,k)/pdtphys
3485	ql_seri(i,k)=oliqmax
3486	ENDIF
3487	ENDDO
3488	ENDDO
3489	IF (nqo==3) THEN
3490	DO k = 1, klev
3491	DO i = 1, klon
3492	IF (qs_seri(i,k)>oicemax) THEN
3493	rain_num(i)=rain_num(i)+(qs_seri(i,k)-oicemax)*zmasse(i,k)/pdtphys
3494	qs_seri(i,k)=oicemax
3495	ENDIF
3496	ENDDO
3497	ENDDO
3498	ENDIF
3499
3500	!---------------------------------------------------------------------------
3501	DO k = 1, klev
3502	DO i = 1, klon
3503	cldfra(i,k) = rneb(i,k)
3504	!CR: a quoi ca sert? Faut-il ajouter qs_seri?
3505	IF (.NOT.new_oliq) cldliq(i,k) = ql_seri(i,k)
3506	ENDDO
3507	ENDDO
3508	IF (check) THEN
3509	za = qcheck(klon,klev,paprs,q_seri,ql_seri,cell_area)
3510	WRITE(lunout,*)"apresilp=", za
3511	zx_t = 0.0
3512	za = 0.0
3513	DO i = 1, klon
3514	za = za + cell_area(i)/REAL(klon)
3515	zx_t = zx_t + (rain_lsc(i) &
3516	+ snow_lsc(i))*cell_area(i)/REAL(klon)
3517	ENDDO
3518	zx_t = zx_t/za*phys_tstep
3519	WRITE(lunout,*)"Precip=", zx_t
3520	ENDIF
3521
3522	IF (mydebug) THEN
3523	CALL writefield_phy('u_seri',u_seri,nbp_lev)
3524	CALL writefield_phy('v_seri',v_seri,nbp_lev)
3525	CALL writefield_phy('t_seri',t_seri,nbp_lev)
3526	CALL writefield_phy('q_seri',q_seri,nbp_lev)
3527	ENDIF
3528
3529	!
3530	!-------------------------------------------------------------------
3531	! PRESCRIPTION DES NUAGES POUR LE RAYONNEMENT
3532	!-------------------------------------------------------------------
3533
3534	! 1. NUAGES CONVECTIFS
3535	!
3536	!IM cf FH
3537	! IF (iflag_cld_th.eq.-1) THEN ! seulement pour Tiedtke
3538	IF (iflag_cld_th.le.-1) THEN ! seulement pour Tiedtke
3539	snow_tiedtke=0.
3540	! print*,'avant calcul de la pseudo precip '
3541	! print*,'iflag_cld_th',iflag_cld_th
3542	IF (iflag_cld_th.eq.-1) THEN
3543	rain_tiedtke=rain_con
3544	ELSE
3545	! print*,'calcul de la pseudo precip '
3546	rain_tiedtke=0.
3547	! print*,'calcul de la pseudo precip 0'
3548	DO k=1,klev
3549	DO i=1,klon
3550	IF (d_q_con(i,k).lt.0.) THEN
3551	rain_tiedtke(i)=rain_tiedtke(i)-d_q_con(i,k)/pdtphys &
3552	*(paprs(i,k)-paprs(i,k+1))/rg
3553	ENDIF
3554	ENDDO
3555	ENDDO
3556	ENDIF
3557	!
3558	! call dump2d(iim,jjm,rain_tiedtke(2:klon-1),'PSEUDO PRECIP ')
3559	!
3560
3561	! Nuages diagnostiques pour Tiedtke
3562	CALL diagcld1(paprs,pplay, &
3563	!IM cf FH. rain_con,snow_con,ibas_con,itop_con,
3564	rain_tiedtke,snow_tiedtke,ibas_con,itop_con, &
3565	diafra,dialiq)
3566	DO k = 1, klev
3567	DO i = 1, klon
3568	IF (diafra(i,k).GT.cldfra(i,k)) THEN
3569	cldliq(i,k) = dialiq(i,k)
3570	cldfra(i,k) = diafra(i,k)
3571	ENDIF
3572	ENDDO
3573	ENDDO
3574
3575	ELSE IF (iflag_cld_th.ge.3) THEN
3576	! On prend pour les nuages convectifs le max du calcul de la
3577	! convection et du calcul du pas de temps precedent diminue d'un facteur
3578	! facttemps
3579	facteur = pdtphys *facttemps
3580	DO k=1,klev
3581	DO i=1,klon
3582	rnebcon(i,k)=rnebcon(i,k)*facteur
3583	IF (rnebcon0(i,k)clwcon0(i,k).GT.rnebcon(i,k)clwcon(i,k)) THEN
3584	rnebcon(i,k)=rnebcon0(i,k)
3585	clwcon(i,k)=clwcon0(i,k)
3586	ENDIF
3587	ENDDO
3588	ENDDO
3589
3590	! On prend la somme des fractions nuageuses et des contenus en eau
3591
3592	IF (iflag_cld_th>=5) THEN
3593
3594	DO k=1,klev
3595	ptconvth(:,k)=fm_therm(:,k+1)>0.
3596	ENDDO
3597
3598	IF (iflag_coupl==4) THEN
3599
3600	! Dans le cas iflag_coupl==4, on prend la somme des convertures
3601	! convectives et lsc dans la partie des thermiques
3602	! Le controle par iflag_coupl est peut etre provisoire.
3603	DO k=1,klev
3604	DO i=1,klon
3605	IF (ptconv(i,k).AND.ptconvth(i,k)) THEN
3606	cldliq(i,k)=cldliq(i,k)+rnebcon(i,k)*clwcon(i,k)
3607	cldfra(i,k)=min(cldfra(i,k)+rnebcon(i,k),1.)
3608	ELSE IF (ptconv(i,k)) THEN
3609	cldfra(i,k)=rnebcon(i,k)
3610	cldliq(i,k)=rnebcon(i,k)*clwcon(i,k)
3611	ENDIF
3612	ENDDO
3613	ENDDO
3614
3615	ELSE IF (iflag_coupl==5) THEN
3616	DO k=1,klev
3617	DO i=1,klon
3618	cldfra(i,k)=min(cldfra(i,k)+rnebcon(i,k),1.)
3619	cldliq(i,k)=cldliq(i,k)+rnebcon(i,k)*clwcon(i,k)
3620	ENDDO
3621	ENDDO
3622
3623	ELSE
3624
3625	! Si on est sur un point touche par la convection
3626	! profonde et pas par les thermiques, on prend la
3627	! couverture nuageuse et l'eau nuageuse de la convection
3628	! profonde.
3629
3630	!IM/FH: 2011/02/23
3631	! definition des points sur lesquels ls thermiques sont actifs
3632
3633	DO k=1,klev
3634	DO i=1,klon
3635	IF (ptconv(i,k).AND. .NOT.ptconvth(i,k)) THEN
3636	cldfra(i,k)=rnebcon(i,k)
3637	cldliq(i,k)=rnebcon(i,k)*clwcon(i,k)
3638	ENDIF
3639	ENDDO
3640	ENDDO
3641
3642	ENDIF
3643
3644	ELSE
3645
3646	! Ancienne version
3647	cldfra(:,:)=min(max(cldfra(:,:),rnebcon(:,:)),1.)
3648	cldliq(:,:)=cldliq(:,:)+rnebcon(:,:)*clwcon(:,:)
3649	ENDIF
3650
3651	ENDIF
3652
3653	! plulsc(:)=0.
3654	! do k=1,klev,-1
3655	! do i=1,klon
3656	! zzz=prfl(:,k)+psfl(:,k)
3657	! if (.not.ptconvth.zzz.gt.0.)
3658	! enddo prfl, psfl,
3659	! enddo
3660	!
3661	! 2. NUAGES STARTIFORMES
3662	!
3663	IF (ok_stratus) THEN
3664	CALL diagcld2(paprs,pplay,t_seri,q_seri, diafra,dialiq)
3665	DO k = 1, klev
3666	DO i = 1, klon
3667	IF (diafra(i,k).GT.cldfra(i,k)) THEN
3668	cldliq(i,k) = dialiq(i,k)
3669	cldfra(i,k) = diafra(i,k)
3670	ENDIF
3671	ENDDO
3672	ENDDO
3673	ENDIF
3674	!
3675	! Precipitation totale
3676	!
3677	DO i = 1, klon
3678	rain_fall(i) = rain_con(i) + rain_lsc(i)
3679	snow_fall(i) = snow_con(i) + snow_lsc(i)
3680	ENDDO
3681	!
3682	! Calculer l'humidite relative pour diagnostique
3683	!
3684	DO k = 1, klev
3685	DO i = 1, klon
3686	zx_t = t_seri(i,k)
3687	IF (thermcep) THEN
3688	!! if (iflag_ice_thermo.eq.0) then !jyg
3689	zdelta = MAX(0.,SIGN(1.,rtt-zx_t))
3690	!! else !jyg
3691	!! zdelta = MAX(0.,SIGN(1.,t_glace_min-zx_t)) !jyg
3692	!! endif !jyg
3693	zx_qs = r2es * FOEEW(zx_t,zdelta)/pplay(i,k)
3694	zx_qs = MIN(0.5,zx_qs)
3695	zcor = 1./(1.-retv*zx_qs)
3696	zx_qs = zx_qs*zcor
3697	ELSE
3698	!! IF (zx_t.LT.t_coup) THEN !jyg
3699	IF (zx_t.LT.rtt) THEN !jyg
3700	zx_qs = qsats(zx_t)/pplay(i,k)
3701	ELSE
3702	zx_qs = qsatl(zx_t)/pplay(i,k)
3703	ENDIF
3704	ENDIF
3705	zx_rh(i,k) = q_seri(i,k)/zx_qs
3706	zqsat(i,k)=zx_qs
3707	ENDDO
3708	ENDDO
3709
3710	!IM Calcul temp.potentielle a 2m (tpot) et temp. potentielle
3711	! equivalente a 2m (tpote) pour diagnostique
3712	!
3713	DO i = 1, klon
3714	tpot(i)=zt2m(i)(100000./paprs(i,1))*RKAPPA
3715	IF (thermcep) THEN
3716	IF(zt2m(i).LT.RTT) then
3717	Lheat=RLSTT
3718	ELSE
3719	Lheat=RLVTT
3720	ENDIF
3721	ELSE
3722	IF (zt2m(i).LT.RTT) THEN
3723	Lheat=RLSTT
3724	ELSE
3725	Lheat=RLVTT
3726	ENDIF
3727	ENDIF
3728	tpote(i) = tpot(i)* &
3729	EXP((Lheat qsat2m(i))/(RCPDzt2m(i)))
3730	ENDDO
3731
3732	IF (type_trac == 'inca') THEN
3733	#ifdef INCA
3734	CALL VTe(VTphysiq)
3735	CALL VTb(VTinca)
3736	calday = REAL(days_elapsed + 1) + jH_cur
3737
3738	CALL chemtime(itap+itau_phy-1, date0, phys_tstep, itap)
3739	CALL AEROSOL_METEO_CALC( &
3740	calday,pdtphys,pplay,paprs,t,pmflxr,pmflxs, &
3741	prfl,psfl,pctsrf,cell_area, &
3742	latitude_deg,longitude_deg,u10m,v10m)
3743
3744	zxsnow_dummy(:) = 0.0
3745
3746	CALL chemhook_begin (calday, &
3747	days_elapsed+1, &
3748	jH_cur, &
3749	pctsrf(1,1), &
3750	latitude_deg, &
3751	longitude_deg, &
3752	cell_area, &
3753	paprs, &
3754	pplay, &
3755	coefh(1:klon,1:klev,is_ave), &
3756	pphi, &
3757	t_seri, &
3758	u, &
3759	v, &
3760	rot, &
3761	wo(:, :, 1), &
3762	q_seri, &
3763	zxtsol, &
3764	zt2m, &
3765	zxsnow_dummy, &
3766	solsw, &
3767	albsol1, &
3768	rain_fall, &
3769	snow_fall, &
3770	itop_con, &
3771	ibas_con, &
3772	cldfra, &
3773	nbp_lon, &
3774	nbp_lat-1, &
3775	tr_seri, &
3776	ftsol, &
3777	paprs, &
3778	cdragh, &
3779	cdragm, &
3780	pctsrf, &
3781	pdtphys, &
3782	itap)
3783
3784	CALL VTe(VTinca)
3785	CALL VTb(VTphysiq)
3786	#endif
3787	ENDIF !type_trac = inca
3788	IF (type_trac == 'repr') THEN
3789	#ifdef REPROBUS
3790	!CALL chemtime_rep(itap+itau_phy-1, date0, dtime, itap)
3791	CALL chemtime_rep(itap+itau_phy-1, date0, phys_tstep, itap)
3792	#endif
3793	ENDIF
3794
3795	!
3796	! Appeler le rayonnement mais calculer tout d'abord l'albedo du sol.
3797	!
3798	IF (MOD(itaprad,radpas).EQ.0) THEN
3799
3800	!
3801	!jq - introduce the aerosol direct and first indirect radiative forcings
3802	!jq - Johannes Quaas, 27/11/2003 (quaas@lmd.jussieu.fr)
3803	IF (flag_aerosol .GT. 0) THEN
3804	IF (iflag_rrtm .EQ. 0) THEN !--old radiation
3805	IF (.NOT. aerosol_couple) THEN
3806	!
3807	CALL readaerosol_optic( &
3808	debut, flag_aerosol, itap, jD_cur-jD_ref, &
3809	pdtphys, pplay, paprs, t_seri, rhcl, presnivs, &
3810	mass_solu_aero, mass_solu_aero_pi, &
3811	tau_aero, piz_aero, cg_aero, &
3812	tausum_aero, tau3d_aero)
3813	ENDIF
3814	ELSE ! RRTM radiation
3815	IF (aerosol_couple .AND. config_inca == 'aero' ) THEN
3816	abort_message='config_inca=aero et rrtm=1 impossible'
3817	CALL abort_physic(modname,abort_message,1)
3818	ELSE
3819	!
3820	#ifdef CPP_RRTM
3821	IF (NSW.EQ.6) THEN
3822	!--new aerosol properties SW and LW
3823	!
3824	#ifdef CPP_Dust
3825	!--SPL aerosol model
3826	CALL splaerosol_optic_rrtm( ok_alw, pplay, paprs, t_seri, rhcl, &
3827	tr_seri, mass_solu_aero, mass_solu_aero_pi, &
3828	tau_aero_sw_rrtm, piz_aero_sw_rrtm, cg_aero_sw_rrtm, &
3829	tausum_aero, tau3d_aero)
3830	#else
3831	!--climatologies or INCA aerosols
3832	CALL readaerosol_optic_rrtm( debut, aerosol_couple, ok_alw, ok_volcan, &
3833	flag_aerosol, flag_bc_internal_mixture, itap, jD_cur-jD_ref, &
3834	pdtphys, pplay, paprs, t_seri, rhcl, presnivs, &
3835	tr_seri, mass_solu_aero, mass_solu_aero_pi, &
3836	tau_aero_sw_rrtm, piz_aero_sw_rrtm, cg_aero_sw_rrtm, &
3837	tausum_aero, drytausum_aero, tau3d_aero)
3838	#endif
3839
3840	IF (flag_aerosol .EQ. 7) THEN
3841	CALL MACv2SP(pphis,pplay,paprs,longitude_deg,latitude_deg, &
3842	tau_aero_sw_rrtm,piz_aero_sw_rrtm,cg_aero_sw_rrtm)
3843	ENDIF
3844
3845	!
3846	ELSE IF (NSW.EQ.2) THEN
3847	!--for now we use the old aerosol properties
3848	!
3849	CALL readaerosol_optic( &
3850	debut, flag_aerosol, itap, jD_cur-jD_ref, &
3851	pdtphys, pplay, paprs, t_seri, rhcl, presnivs, &
3852	mass_solu_aero, mass_solu_aero_pi, &
3853	tau_aero, piz_aero, cg_aero, &
3854	tausum_aero, tau3d_aero)
3855	!
3856	!--natural aerosols
3857	tau_aero_sw_rrtm(:,:,1,:)=tau_aero(:,:,3,:)
3858	piz_aero_sw_rrtm(:,:,1,:)=piz_aero(:,:,3,:)
3859	cg_aero_sw_rrtm (:,:,1,:)=cg_aero (:,:,3,:)
3860	!--all aerosols
3861	tau_aero_sw_rrtm(:,:,2,:)=tau_aero(:,:,2,:)
3862	piz_aero_sw_rrtm(:,:,2,:)=piz_aero(:,:,2,:)
3863	cg_aero_sw_rrtm (:,:,2,:)=cg_aero (:,:,2,:)
3864	!
3865	!--no LW optics
3866	tau_aero_lw_rrtm(:,:,:,:) = 1.e-15
3867	!
3868	ELSE
3869	abort_message='Only NSW=2 or 6 are possible with ' &
3870	// 'aerosols and iflag_rrtm=1'
3871	CALL abort_physic(modname,abort_message,1)
3872	ENDIF
3873	#else
3874	abort_message='You should compile with -rrtm if running ' &
3875	// 'with iflag_rrtm=1'
3876	CALL abort_physic(modname,abort_message,1)
3877	#endif
3878	!
3879	ENDIF
3880	ENDIF
3881	ELSE !--flag_aerosol = 0
3882	tausum_aero(:,:,:) = 0.
3883	drytausum_aero(:,:) = 0.
3884	mass_solu_aero(:,:) = 0.
3885	mass_solu_aero_pi(:,:) = 0.
3886	IF (iflag_rrtm .EQ. 0) THEN !--old radiation
3887	tau_aero(:,:,:,:) = 1.e-15
3888	piz_aero(:,:,:,:) = 1.
3889	cg_aero(:,:,:,:) = 0.
3890	ELSE
3891	tau_aero_sw_rrtm(:,:,:,:) = 1.e-15
3892	tau_aero_lw_rrtm(:,:,:,:) = 1.e-15
3893	piz_aero_sw_rrtm(:,:,:,:) = 1.0
3894	cg_aero_sw_rrtm(:,:,:,:) = 0.0
3895	ENDIF
3896	ENDIF
3897	!
3898	!--WMO criterion to determine tropopause
3899	CALL stratosphere_mask(missing_val, pphis, t_seri, pplay, latitude_deg)
3900	!
3901	!--STRAT AEROSOL
3902	!--updates tausum_aero,tau_aero,piz_aero,cg_aero
3903	IF (flag_aerosol_strat.GT.0) THEN
3904	IF (prt_level .GE.10) THEN
3905	PRINT *,'appel a readaerosolstrat', mth_cur
3906	ENDIF
3907	IF (iflag_rrtm.EQ.0) THEN
3908	IF (flag_aerosol_strat.EQ.1) THEN
3909	CALL readaerosolstrato(debut)
3910	ELSE
3911	abort_message='flag_aerosol_strat must equal 1 for rrtm=0'
3912	CALL abort_physic(modname,abort_message,1)
3913	ENDIF
3914	ELSE
3915	#ifdef CPP_RRTM
3916	#ifndef CPP_StratAer
3917	!--prescribed strat aerosols
3918	!--only in the case of non-interactive strat aerosols
3919	IF (flag_aerosol_strat.EQ.1) THEN
3920	CALL readaerosolstrato1_rrtm(debut)
3921	ELSEIF (flag_aerosol_strat.EQ.2) THEN
3922	CALL readaerosolstrato2_rrtm(debut, ok_volcan)
3923	ELSE
3924	abort_message='flag_aerosol_strat must equal 1 or 2 for rrtm=1'
3925	CALL abort_physic(modname,abort_message,1)
3926	ENDIF
3927	#endif
3928	#else
3929	abort_message='You should compile with -rrtm if running ' &
3930	// 'with iflag_rrtm=1'
3931	CALL abort_physic(modname,abort_message,1)
3932	#endif
3933	ENDIF
3934	ELSE
3935	tausum_aero(:,:,id_STRAT_phy) = 0.
3936	ENDIF
3937	!
3938	#ifdef CPP_RRTM
3939	#ifdef CPP_StratAer
3940	!--compute stratospheric mask
3941	CALL stratosphere_mask(missing_val, pphis, t_seri, pplay, latitude_deg)
3942	!--interactive strat aerosols
3943	CALL calcaerosolstrato_rrtm(pplay,t_seri,paprs,debut)
3944	#endif
3945	#endif
3946	!--fin STRAT AEROSOL
3947	!
3948
3949	! Calculer les parametres optiques des nuages et quelques
3950	! parametres pour diagnostiques:
3951	!
3952	IF (aerosol_couple.AND.config_inca=='aero') THEN
3953	mass_solu_aero(:,:) = ccm(:,:,1)
3954	mass_solu_aero_pi(:,:) = ccm(:,:,2)
3955	ENDIF
3956
3957	IF (ok_newmicro) then
3958	IF (iflag_rrtm.NE.0) THEN
3959	#ifdef CPP_RRTM
3960	IF (ok_cdnc.AND.NRADLP.NE.3) THEN
3961	abort_message='RRTM choix incoherent NRADLP doit etre egal a 3 ' &
3962	// 'pour ok_cdnc'
3963	CALL abort_physic(modname,abort_message,1)
3964	ENDIF
3965	#else
3966
3967	abort_message='You should compile with -rrtm if running with '//'iflag_rrtm=1'
3968	CALL abort_physic(modname,abort_message,1)
3969	#endif
3970	ENDIF
3971	CALL newmicro (flag_aerosol, ok_cdnc, bl95_b0, bl95_b1, &
3972	paprs, pplay, t_seri, cldliq, cldfra, &
3973	cldtau, cldemi, cldh, cldl, cldm, cldt, cldq, &
3974	flwp, fiwp, flwc, fiwc, &
3975	mass_solu_aero, mass_solu_aero_pi, &
3976	cldtaupi, re, fl, ref_liq, ref_ice, &
3977	ref_liq_pi, ref_ice_pi)
3978	ELSE
3979	CALL nuage (paprs, pplay, &
3980	t_seri, cldliq, cldfra, cldtau, cldemi, &
3981	cldh, cldl, cldm, cldt, cldq, &
3982	ok_aie, &
3983	mass_solu_aero, mass_solu_aero_pi, &
3984	bl95_b0, bl95_b1, &
3985	cldtaupi, re, fl)
3986	ENDIF
3987	!
3988	!IM betaCRF
3989	!
3990	cldtaurad = cldtau
3991	cldtaupirad = cldtaupi
3992	cldemirad = cldemi
3993	cldfrarad = cldfra
3994
3995	!
3996	IF (lon1_beta.EQ.-180..AND.lon2_beta.EQ.180..AND. &
3997	lat1_beta.EQ.90..AND.lat2_beta.EQ.-90.) THEN
3998	!
3999	! global
4000	!
4001	!IM 251017 begin
4002	! print*,'physiq betaCRF global zdtime=',zdtime
4003	!IM 251017 end
4004	DO k=1, klev
4005	DO i=1, klon
4006	IF (pplay(i,k).GE.pfree) THEN
4007	beta(i,k) = beta_pbl
4008	ELSE
4009	beta(i,k) = beta_free
4010	ENDIF
4011	IF (mskocean_beta) THEN
4012	beta(i,k) = beta(i,k) * pctsrf(i,is_oce)
4013	ENDIF
4014	cldtaurad(i,k) = cldtau(i,k) * beta(i,k)
4015	cldtaupirad(i,k) = cldtaupi(i,k) * beta(i,k)
4016	cldemirad(i,k) = cldemi(i,k) * beta(i,k)
4017	cldfrarad(i,k) = cldfra(i,k) * beta(i,k)
4018	ENDDO
4019	ENDDO
4020	!
4021	ELSE
4022	!
4023	! regional
4024	!
4025	DO k=1, klev
4026	DO i=1,klon
4027	!
4028	IF (longitude_deg(i).ge.lon1_beta.AND. &
4029	longitude_deg(i).le.lon2_beta.AND. &
4030	latitude_deg(i).le.lat1_beta.AND. &
4031	latitude_deg(i).ge.lat2_beta) THEN
4032	IF (pplay(i,k).GE.pfree) THEN
4033	beta(i,k) = beta_pbl
4034	ELSE
4035	beta(i,k) = beta_free
4036	ENDIF
4037	IF (mskocean_beta) THEN
4038	beta(i,k) = beta(i,k) * pctsrf(i,is_oce)
4039	ENDIF
4040	cldtaurad(i,k) = cldtau(i,k) * beta(i,k)
4041	cldtaupirad(i,k) = cldtaupi(i,k) * beta(i,k)
4042	cldemirad(i,k) = cldemi(i,k) * beta(i,k)
4043	cldfrarad(i,k) = cldfra(i,k) * beta(i,k)
4044	ENDIF
4045	!
4046	ENDDO
4047	ENDDO
4048	!
4049	ENDIF
4050
4051	!lecture de la chlorophylle pour le nouvel albedo de Sunghye Baek
4052	IF (ok_chlorophyll) THEN
4053	print*,"-- reading chlorophyll"
4054	CALL readchlorophyll(debut)
4055	ENDIF
4056
4057	!--if ok_suntime_rrtm we use ancillay data for RSUN
4058	!--previous values are therefore overwritten
4059	!--this is needed for CMIP6 runs
4060	!--and only possible for new radiation scheme
4061	IF (iflag_rrtm.EQ.1.AND.ok_suntime_rrtm) THEN
4062	#ifdef CPP_RRTM
4063	CALL read_rsun_rrtm(debut)
4064	#endif
4065	ENDIF
4066
4067	IF (mydebug) THEN
4068	CALL writefield_phy('u_seri',u_seri,nbp_lev)
4069	CALL writefield_phy('v_seri',v_seri,nbp_lev)
4070	CALL writefield_phy('t_seri',t_seri,nbp_lev)
4071	CALL writefield_phy('q_seri',q_seri,nbp_lev)
4072	ENDIF
4073
4074	!
4075	!sonia : If Iflag_radia >=2, pertubation of some variables
4076	!input to radiation (DICE)
4077	!
4078	IF (iflag_radia .ge. 2) THEN
4079	zsav_tsol (:) = zxtsol(:)
4080	CALL perturb_radlwsw(zxtsol,iflag_radia)
4081	ENDIF
4082
4083	IF (aerosol_couple.AND.config_inca=='aero') THEN
4084	#ifdef INCA
4085	CALL radlwsw_inca &
4086	(chemistry_couple, kdlon,kflev,dist, rmu0, fract, solaire, &
4087	paprs, pplay,zxtsol,albsol1, albsol2, t_seri,q_seri, &
4088	size(wo,3), wo, &
4089	cldfrarad, cldemirad, cldtaurad, &
4090	heat,heat0,cool,cool0,albpla, &
4091	topsw,toplw,solsw,sollw, &
4092	sollwdown, &
4093	topsw0,toplw0,solsw0,sollw0, &
4094	lwdn0, lwdn, lwup0, lwup, &
4095	swdn0, swdn, swup0, swup, &
4096	ok_ade, ok_aie, &
4097	tau_aero, piz_aero, cg_aero, &
4098	topswad_aero, solswad_aero, &
4099	topswad0_aero, solswad0_aero, &
4100	topsw_aero, topsw0_aero, &
4101	solsw_aero, solsw0_aero, &
4102	cldtaupirad, &
4103	topswai_aero, solswai_aero)
4104	#endif
4105	ELSE
4106	!
4107	!IM calcul radiatif pour le cas actuel
4108	!
4109	RCO2 = RCO2_act
4110	RCH4 = RCH4_act
4111	RN2O = RN2O_act
4112	RCFC11 = RCFC11_act
4113	RCFC12 = RCFC12_act
4114	!
4115	!--interactive CO2 in ppm from carbon cycle
4116	IF (carbon_cycle_rad.AND..NOT.debut) THEN
4117	RCO2=RCO2_glo
4118	ENDIF
4119	!
4120	IF (prt_level .GE.10) THEN
4121	print *,' ->radlwsw, number 1 '
4122	ENDIF
4123	!
4124	CALL radlwsw &
4125	(dist, rmu0, fract, &
4126	!albedo SB >>>
4127	! paprs, pplay,zxtsol,albsol1, albsol2, &
4128	paprs, pplay,zxtsol,SFRWL,albsol_dir, albsol_dif, &
4129	!albedo SB <<<
4130	t_seri,q_seri,wo, &
4131	cldfrarad, cldemirad, cldtaurad, &
4132	ok_ade.OR.flag_aerosol_strat.GT.0, ok_aie, ok_volcan, &
4133	flag_aerosol, &
4134	flag_aerosol_strat, flag_aer_feedback, &
4135	tau_aero, piz_aero, cg_aero, &
4136	tau_aero_sw_rrtm, piz_aero_sw_rrtm, cg_aero_sw_rrtm, &
4137	! Rajoute par OB pour RRTM
4138	tau_aero_lw_rrtm, &
4139	cldtaupirad, &
4140	! zqsat, flwcrad, fiwcrad, &
4141	zqsat, flwc, fiwc, &
4142	ref_liq, ref_ice, ref_liq_pi, ref_ice_pi, &
4143	heat,heat0,cool,cool0,albpla, &
4144	heat_volc,cool_volc, &
4145	topsw,toplw,solsw,solswfdiff,sollw, &
4146	sollwdown, &
4147	topsw0,toplw0,solsw0,sollw0, &
4148	lwdnc0, lwdn0, lwdn, lwupc0, lwup0, lwup, &
4149	swdnc0, swdn0, swdn, swupc0, swup0, swup, &
4150	topswad_aero, solswad_aero, &
4151	topswai_aero, solswai_aero, &
4152	topswad0_aero, solswad0_aero, &
4153	topsw_aero, topsw0_aero, &
4154	solsw_aero, solsw0_aero, &
4155	topswcf_aero, solswcf_aero, &
4156	!-C. Kleinschmitt for LW diagnostics
4157	toplwad_aero, sollwad_aero,&
4158	toplwai_aero, sollwai_aero, &
4159	toplwad0_aero, sollwad0_aero,&
4160	!-end
4161	ZLWFT0_i, ZFLDN0, ZFLUP0, &
4162	ZSWFT0_i, ZFSDN0, ZFSUP0)
4163
4164	!lwoff=y, betalwoff=1. : offset LW CRE for radiation code and other
4165	!schemes
4166	toplw = toplw + betalwoff * (toplw0 - toplw)
4167	sollw = sollw + betalwoff * (sollw0 - sollw)
4168	lwdn = lwdn + betalwoff * (lwdn0 - lwdn)
4169	lwup = lwup + betalwoff * (lwup0 - lwup)
4170	sollwdown(:)= sollwdown(:) + betalwoff (-1.ZFLDN0(:,1) - &
4171	sollwdown(:))
4172	cool = cool + betalwoff * (cool0 - cool)
4173
4174	#ifndef CPP_XIOS
4175	!--OB 30/05/2016 modified 21/10/2016
4176	!--here we return swaero_diag and dryaod_diag to FALSE
4177	!--and histdef will switch it back to TRUE if necessary
4178	!--this is necessary to get the right swaero at first step
4179	!--but only in the case of no XIOS as XIOS is covered elsewhere
4180	IF (debut) swaerofree_diag = .FALSE.
4181	IF (debut) swaero_diag = .FALSE.
4182	IF (debut) dryaod_diag = .FALSE.
4183	!--IM 15/09/2017 here we return ok_4xCO2atm to FALSE
4184	!--as for swaero_diag, see above
4185	IF (debut) ok_4xCO2atm = .FALSE.
4186
4187	!
4188	!IM 2eme calcul radiatif pour le cas perturbe ou au moins un
4189	!IM des taux doit etre different du taux actuel
4190	!IM Par defaut on a les taux perturbes egaux aux taux actuels
4191	!
4192	IF (RCO2_per.NE.RCO2_act.OR. &
4193	RCH4_per.NE.RCH4_act.OR. &
4194	RN2O_per.NE.RN2O_act.OR. &
4195	RCFC11_per.NE.RCFC11_act.OR. &
4196	RCFC12_per.NE.RCFC12_act) ok_4xCO2atm =.TRUE.
4197	#endif
4198	!
4199	IF (ok_4xCO2atm) THEN
4200	!
4201	RCO2 = RCO2_per
4202	RCH4 = RCH4_per
4203	RN2O = RN2O_per
4204	RCFC11 = RCFC11_per
4205	RCFC12 = RCFC12_per
4206	!
4207	IF (prt_level .GE.10) THEN
4208	print *,' ->radlwsw, number 2 '
4209	ENDIF
4210	!
4211	CALL radlwsw &
4212	(dist, rmu0, fract, &
4213	!albedo SB >>>
4214	! paprs, pplay,zxtsol,albsol1, albsol2, &
4215	paprs, pplay,zxtsol,SFRWL,albsol_dir, albsol_dif, &
4216	!albedo SB <<<
4217	t_seri,q_seri,wo, &
4218	cldfrarad, cldemirad, cldtaurad, &
4219	ok_ade.OR.flag_aerosol_strat.GT.0, ok_aie, ok_volcan, &
4220	flag_aerosol, &
4221	flag_aerosol_strat, flag_aer_feedback, &
4222	tau_aero, piz_aero, cg_aero, &
4223	tau_aero_sw_rrtm, piz_aero_sw_rrtm, cg_aero_sw_rrtm, &
4224	! Rajoute par OB pour RRTM
4225	tau_aero_lw_rrtm, &
4226	cldtaupi, &
4227	! zqsat, flwcrad, fiwcrad, &
4228	zqsat, flwc, fiwc, &
4229	ref_liq, ref_ice, ref_liq_pi, ref_ice_pi, &
4230	heatp,heat0p,coolp,cool0p,albplap, &
4231	heat_volc,cool_volc, &
4232	topswp,toplwp,solswp,solswfdiffp,sollwp, &
4233	sollwdownp, &
4234	topsw0p,toplw0p,solsw0p,sollw0p, &
4235	lwdnc0p, lwdn0p, lwdnp, lwupc0p, lwup0p, lwupp, &
4236	swdnc0p, swdn0p, swdnp, swupc0p, swup0p, swupp, &
4237	topswad_aerop, solswad_aerop, &
4238	topswai_aerop, solswai_aerop, &
4239	topswad0_aerop, solswad0_aerop, &
4240	topsw_aerop, topsw0_aerop, &
4241	solsw_aerop, solsw0_aerop, &
4242	topswcf_aerop, solswcf_aerop, &
4243	!-C. Kleinschmitt for LW diagnostics
4244	toplwad_aerop, sollwad_aerop,&
4245	toplwai_aerop, sollwai_aerop, &
4246	toplwad0_aerop, sollwad0_aerop,&
4247	!-end
4248	ZLWFT0_i, ZFLDN0, ZFLUP0, &
4249	ZSWFT0_i, ZFSDN0, ZFSUP0)
4250	endif !ok_4xCO2atm
4251	ENDIF ! aerosol_couple
4252	itaprad = 0
4253	!
4254	! If Iflag_radia >=2, reset pertubed variables
4255	!
4256	IF (iflag_radia .ge. 2) THEN
4257	zxtsol(:) = zsav_tsol (:)
4258	ENDIF
4259	ENDIF ! MOD(itaprad,radpas)
4260	itaprad = itaprad + 1
4261
4262	IF (iflag_radia.eq.0) THEN
4263	IF (prt_level.ge.9) THEN
4264	PRINT *,'--------------------------------------------------'
4265	PRINT *,'>>>> ATTENTION rayonnement desactive pour ce cas'
4266	PRINT *,'>>>> heat et cool mis a zero '
4267	PRINT *,'--------------------------------------------------'
4268	ENDIF
4269	heat=0.
4270	cool=0.
4271	sollw=0. ! MPL 01032011
4272	solsw=0.
4273	radsol=0.
4274	swup=0. ! MPL 27102011 pour les fichiers AMMA_profiles et AMMA_scalars
4275	swup0=0.
4276	lwup=0.
4277	lwup0=0.
4278	lwdn=0.
4279	lwdn0=0.
4280	ENDIF
4281
4282	!
4283	! Calculer radsol a l'exterieur de radlwsw
4284	! pour prendre en compte le cycle diurne
4285	! recode par Olivier Boucher en sept 2015
4286	!
4287	radsol=solsw*swradcorr+sollw
4288
4289	IF (ok_4xCO2atm) THEN
4290	radsolp=solswp*swradcorr+sollwp
4291	ENDIF
4292
4293	!
4294	! Ajouter la tendance des rayonnements (tous les pas)
4295	! avec une correction pour le cycle diurne dans le SW
4296	!
4297
4298	DO k=1, klev
4299	d_t_swr(:,k)=swradcorr(:)heat(:,k)phys_tstep/RDAY
4300	d_t_sw0(:,k)=swradcorr(:)heat0(:,k)phys_tstep/RDAY
4301	d_t_lwr(:,k)=-cool(:,k)*phys_tstep/RDAY
4302	d_t_lw0(:,k)=-cool0(:,k)*phys_tstep/RDAY
4303	ENDDO
4304
4305	CALL add_phys_tend(du0,dv0,d_t_swr,dq0,dql0,dqi0,paprs,'SW',abortphy,flag_inhib_tend,itap,0)
4306	CALL prt_enerbil('SW',itap)
4307	CALL add_phys_tend(du0,dv0,d_t_lwr,dq0,dql0,dqi0,paprs,'LW',abortphy,flag_inhib_tend,itap,0)
4308	CALL prt_enerbil('LW',itap)
4309
4310	!
4311	IF (mydebug) THEN
4312	CALL writefield_phy('u_seri',u_seri,nbp_lev)
4313	CALL writefield_phy('v_seri',v_seri,nbp_lev)
4314	CALL writefield_phy('t_seri',t_seri,nbp_lev)
4315	CALL writefield_phy('q_seri',q_seri,nbp_lev)
4316	ENDIF
4317
4318	! Calculer l'hydrologie de la surface
4319	!
4320	! CALL hydrol(dtime,pctsrf,rain_fall, snow_fall, zxevap,
4321	! . agesno, ftsol,fqsurf,fsnow, ruis)
4322	!
4323
4324	!
4325	! Calculer le bilan du sol et la derive de temperature (couplage)
4326	!
4327	DO i = 1, klon
4328	! bils(i) = radsol(i) - sens(i) - evap(i)*RLVTT
4329	! a la demande de JLD
4330	bils(i) = radsol(i) - sens(i) + zxfluxlat(i)
4331	ENDDO
4332	!
4333	!moddeblott(jan95)
4334	! Appeler le programme de parametrisation de l'orographie
4335	! a l'echelle sous-maille:
4336	!
4337	IF (prt_level .GE.10) THEN
4338	print *,' call orography ? ', ok_orodr
4339	ENDIF
4340	!
4341	IF (ok_orodr) THEN
4342	!
4343	! selection des points pour lesquels le shema est actif:
4344	igwd=0
4345	DO i=1,klon
4346	itest(i)=0
4347	! IF ((zstd(i).gt.10.0)) THEN
4348	IF (((zpic(i)-zmea(i)).GT.100.).AND.(zstd(i).GT.10.0)) THEN
4349	itest(i)=1
4350	igwd=igwd+1
4351	idx(igwd)=i
4352	ENDIF
4353	ENDDO
4354	! igwdim=MAX(1,igwd)
4355	!
4356	IF (ok_strato) THEN
4357
4358	CALL drag_noro_strato(0,klon,klev,phys_tstep,paprs,pplay, &
4359	zmea,zstd, zsig, zgam, zthe,zpic,zval, &
4360	igwd,idx,itest, &
4361	t_seri, u_seri, v_seri, &
4362	zulow, zvlow, zustrdr, zvstrdr, &
4363	d_t_oro, d_u_oro, d_v_oro)
4364
4365	ELSE
4366	CALL drag_noro(klon,klev,phys_tstep,paprs,pplay, &
4367	zmea,zstd, zsig, zgam, zthe,zpic,zval, &
4368	igwd,idx,itest, &
4369	t_seri, u_seri, v_seri, &
4370	zulow, zvlow, zustrdr, zvstrdr, &
4371	d_t_oro, d_u_oro, d_v_oro)
4372	ENDIF
4373	!
4374	! ajout des tendances
4375	!-----------------------------------------------------------------------
4376	! ajout des tendances de la trainee de l'orographie
4377	CALL add_phys_tend(d_u_oro,d_v_oro,d_t_oro,dq0,dql0,dqi0,paprs,'oro', &
4378	abortphy,flag_inhib_tend,itap,0)
4379	CALL prt_enerbil('oro',itap)
4380	!----------------------------------------------------------------------
4381	!
4382	ENDIF ! fin de test sur ok_orodr
4383	!
4384	IF (mydebug) THEN
4385	CALL writefield_phy('u_seri',u_seri,nbp_lev)
4386	CALL writefield_phy('v_seri',v_seri,nbp_lev)
4387	CALL writefield_phy('t_seri',t_seri,nbp_lev)
4388	CALL writefield_phy('q_seri',q_seri,nbp_lev)
4389	ENDIF
4390
4391	IF (ok_orolf) THEN
4392	!
4393	! selection des points pour lesquels le shema est actif:
4394	igwd=0
4395	DO i=1,klon
4396	itest(i)=0
4397	IF ((zpic(i)-zmea(i)).GT.100.) THEN
4398	itest(i)=1
4399	igwd=igwd+1
4400	idx(igwd)=i
4401	ENDIF
4402	ENDDO
4403	! igwdim=MAX(1,igwd)
4404	!
4405	IF (ok_strato) THEN
4406
4407	CALL lift_noro_strato(klon,klev,phys_tstep,paprs,pplay, &
4408	latitude_deg,zmea,zstd,zpic,zgam,zthe,zpic,zval, &
4409	igwd,idx,itest, &
4410	t_seri, u_seri, v_seri, &
4411	zulow, zvlow, zustrli, zvstrli, &
4412	d_t_lif, d_u_lif, d_v_lif )
4413
4414	ELSE
4415	CALL lift_noro(klon,klev,phys_tstep,paprs,pplay, &
4416	latitude_deg,zmea,zstd,zpic, &
4417	itest, &
4418	t_seri, u_seri, v_seri, &
4419	zulow, zvlow, zustrli, zvstrli, &
4420	d_t_lif, d_u_lif, d_v_lif)
4421	ENDIF
4422
4423	! ajout des tendances de la portance de l'orographie
4424	CALL add_phys_tend(d_u_lif, d_v_lif, d_t_lif, dq0, dql0, dqi0, paprs, &
4425	'lif', abortphy,flag_inhib_tend,itap,0)
4426	CALL prt_enerbil('lif',itap)
4427	ENDIF ! fin de test sur ok_orolf
4428
4429	IF (ok_hines) then
4430	! HINES GWD PARAMETRIZATION
4431	east_gwstress=0.
4432	west_gwstress=0.
4433	du_gwd_hines=0.
4434	dv_gwd_hines=0.
4435	CALL hines_gwd(klon, klev, phys_tstep, paprs, pplay, latitude_deg, t_seri, &
4436	u_seri, v_seri, zustr_gwd_hines, zvstr_gwd_hines, d_t_hin, &
4437	du_gwd_hines, dv_gwd_hines)
4438	zustr_gwd_hines=0.
4439	zvstr_gwd_hines=0.
4440	DO k = 1, klev
4441	zustr_gwd_hines(:)=zustr_gwd_hines(:)+ du_gwd_hines(:, k)/phys_tstep &
4442	* (paprs(:, k)-paprs(:, k+1))/rg
4443	zvstr_gwd_hines(:)=zvstr_gwd_hines(:)+ dv_gwd_hines(:, k)/phys_tstep &
4444	* (paprs(:, k)-paprs(:, k+1))/rg
4445	ENDDO
4446
4447	d_t_hin(:, :)=0.
4448	CALL add_phys_tend(du_gwd_hines, dv_gwd_hines, d_t_hin, dq0, dql0, &
4449	dqi0, paprs, 'hin', abortphy,flag_inhib_tend,itap,0)
4450	CALL prt_enerbil('hin',itap)
4451	ENDIF
4452
4453	IF (.not. ok_hines .and. ok_gwd_rando) then
4454	! ym missing init for east_gwstress & west_gwstress -> added in phys_local_var_mod
4455	CALL acama_GWD_rando(PHYS_TSTEP, pplay, latitude_deg, t_seri, u_seri, &
4456	v_seri, rot, zustr_gwd_front, zvstr_gwd_front, du_gwd_front, &
4457	dv_gwd_front, east_gwstress, west_gwstress)
4458	zustr_gwd_front=0.
4459	zvstr_gwd_front=0.
4460	DO k = 1, klev
4461	zustr_gwd_front(:)=zustr_gwd_front(:)+ du_gwd_front(:, k)/phys_tstep &
4462	* (paprs(:, k)-paprs(:, k+1))/rg
4463	zvstr_gwd_front(:)=zvstr_gwd_front(:)+ dv_gwd_front(:, k)/phys_tstep &
4464	* (paprs(:, k)-paprs(:, k+1))/rg
4465	ENDDO
4466
4467	CALL add_phys_tend(du_gwd_front, dv_gwd_front, dt0, dq0, dql0, dqi0, &
4468	paprs, 'front_gwd_rando', abortphy,flag_inhib_tend,itap,0)
4469	CALL prt_enerbil('front_gwd_rando',itap)
4470	ENDIF
4471
4472	IF (ok_gwd_rando) THEN
4473	CALL FLOTT_GWD_rando(PHYS_TSTEP, pplay, t_seri, u_seri, v_seri, &
4474	rain_fall + snow_fall, zustr_gwd_rando, zvstr_gwd_rando, &
4475	du_gwd_rando, dv_gwd_rando, east_gwstress, west_gwstress)
4476	CALL add_phys_tend(du_gwd_rando, dv_gwd_rando, dt0, dq0, dql0, dqi0, &
4477	paprs, 'flott_gwd_rando', abortphy,flag_inhib_tend,itap,0)
4478	CALL prt_enerbil('flott_gwd_rando',itap)
4479	zustr_gwd_rando=0.
4480	zvstr_gwd_rando=0.
4481	DO k = 1, klev
4482	zustr_gwd_rando(:)=zustr_gwd_rando(:)+ du_gwd_rando(:, k)/phys_tstep &
4483	* (paprs(:, k)-paprs(:, k+1))/rg
4484	zvstr_gwd_rando(:)=zvstr_gwd_rando(:)+ dv_gwd_rando(:, k)/phys_tstep &
4485	* (paprs(:, k)-paprs(:, k+1))/rg
4486	ENDDO
4487	ENDIF
4488
4489	! STRESS NECESSAIRES: TOUTE LA PHYSIQUE
4490
4491	IF (mydebug) THEN
4492	CALL writefield_phy('u_seri',u_seri,nbp_lev)
4493	CALL writefield_phy('v_seri',v_seri,nbp_lev)
4494	CALL writefield_phy('t_seri',t_seri,nbp_lev)
4495	CALL writefield_phy('q_seri',q_seri,nbp_lev)
4496	ENDIF
4497
4498	DO i = 1, klon
4499	zustrph(i)=0.
4500	zvstrph(i)=0.
4501	ENDDO
4502	DO k = 1, klev
4503	DO i = 1, klon
4504	zustrph(i)=zustrph(i)+(u_seri(i,k)-u(i,k))/phys_tstep* &
4505	(paprs(i,k)-paprs(i,k+1))/rg
4506	zvstrph(i)=zvstrph(i)+(v_seri(i,k)-v(i,k))/phys_tstep* &
4507	(paprs(i,k)-paprs(i,k+1))/rg
4508	ENDDO
4509	ENDDO
4510	!
4511	!IM calcul composantes axiales du moment angulaire et couple des montagnes
4512	!
4513	IF (is_sequential .and. ok_orodr) THEN
4514	CALL aaam_bud (27,klon,klev,jD_cur-jD_ref,jH_cur, &
4515	ra,rg,romega, &
4516	latitude_deg,longitude_deg,pphis, &
4517	zustrdr,zustrli,zustrph, &
4518	zvstrdr,zvstrli,zvstrph, &
4519	paprs,u,v, &
4520	aam, torsfc)
4521	ENDIF
4522	!IM cf. FLott END
4523	!DC Calcul de la tendance due au methane
4524	IF (ok_qch4) THEN
4525	CALL METHOX(1,klon,klon,klev,q_seri,d_q_ch4,pplay)
4526	! ajout de la tendance d'humidite due au methane
4527	d_q_ch4_dtime(:,:) = d_q_ch4(:,:)*phys_tstep
4528	CALL add_phys_tend(du0, dv0, dt0, d_q_ch4_dtime, dql0, dqi0, paprs, &
4529	'q_ch4', abortphy,flag_inhib_tend,itap,0)
4530	d_q_ch4(:,:) = d_q_ch4_dtime(:,:)/phys_tstep
4531	ENDIF
4532	!
4533	!
4534
4535	!===============================================================
4536	! Additional tendency of TKE due to orography
4537	!===============================================================
4538	!
4539	! Inititialization
4540	!------------------
4541
4542	addtkeoro=0
4543	CALL getin_p('addtkeoro',addtkeoro)
4544
4545	IF (prt_level.ge.5) &
4546	print*,'addtkeoro', addtkeoro
4547
4548	alphatkeoro=1.
4549	CALL getin_p('alphatkeoro',alphatkeoro)
4550	alphatkeoro=min(max(0.,alphatkeoro),1.)
4551
4552	smallscales_tkeoro=.FALSE.
4553	CALL getin_p('smallscales_tkeoro',smallscales_tkeoro)
4554
4555
4556	dtadd(:,:)=0.
4557	duadd(:,:)=0.
4558	dvadd(:,:)=0.
4559
4560	! Choices for addtkeoro:
4561	! ** 0 no TKE tendency from orography
4562	! ** 1 we include a fraction alphatkeoro of the whole tendency duoro
4563	! ** 2 we include a fraction alphatkeoro of the gravity wave part of duoro
4564	!
4565
4566	IF (addtkeoro .GT. 0 .AND. ok_orodr ) THEN
4567	! -------------------------------------------
4568
4569
4570	! selection des points pour lesquels le schema est actif:
4571
4572
4573	IF (addtkeoro .EQ. 1 ) THEN
4574
4575	duadd(:,:)=alphatkeoro*d_u_oro(:,:)
4576	dvadd(:,:)=alphatkeoro*d_v_oro(:,:)
4577
4578	ELSE IF (addtkeoro .EQ. 2) THEN
4579
4580	IF (smallscales_tkeoro) THEN
4581	igwd=0
4582	DO i=1,klon
4583	itest(i)=0
4584	! Etienne: ici je prends en compte plus de relief que la routine drag_noro_strato
4585	! car on peut s'attendre a ce que les petites echelles produisent aussi de la TKE
4586	! Mais attention, cela ne va pas dans le sens de la conservation de l'energie!
4587	IF (zstd(i).GT.1.0) THEN
4588	itest(i)=1
4589	igwd=igwd+1
4590	idx(igwd)=i
4591	ENDIF
4592	ENDDO
4593
4594	ELSE
4595
4596	igwd=0
4597	DO i=1,klon
4598	itest(i)=0
4599	IF (((zpic(i)-zmea(i)).GT.100.).AND.(zstd(i).GT.10.0)) THEN
4600	itest(i)=1
4601	igwd=igwd+1
4602	idx(igwd)=i
4603	ENDIF
4604	ENDDO
4605
4606	ENDIF
4607
4608	CALL drag_noro_strato(addtkeoro,klon,klev,phys_tstep,paprs,pplay, &
4609	zmea,zstd, zsig, zgam, zthe,zpic,zval, &
4610	igwd,idx,itest, &
4611	t_seri, u_seri, v_seri, &
4612	zulow, zvlow, zustrdr, zvstrdr, &
4613	d_t_oro_gw, d_u_oro_gw, d_v_oro_gw)
4614
4615	zustrdr(:)=0.
4616	zvstrdr(:)=0.
4617	zulow(:)=0.
4618	zvlow(:)=0.
4619
4620	duadd(:,:)=alphatkeoro*d_u_oro_gw(:,:)
4621	dvadd(:,:)=alphatkeoro*d_v_oro_gw(:,:)
4622	ENDIF
4623
4624
4625	! TKE update from subgrid temperature and wind tendencies
4626	!----------------------------------------------------------
4627	forall (k=1: nbp_lev) exner(:, k) = (pplay(:, k)/paprs(:,1))**RKAPPA
4628
4629
4630	CALL tend_to_tke(pdtphys,paprs,exner,t_seri,u_seri,v_seri,dtadd,duadd,dvadd,pctsrf,pbl_tke)
4631
4632
4633	ENDIF
4634	! -----
4635	!===============================================================
4636
4637
4638	!====================================================================
4639	! Interface Simulateur COSP (Calipso, ISCCP, MISR, ..)
4640	!====================================================================
4641	! Abderrahmane 24.08.09
4642
4643	IF (ok_cosp) THEN
4644	! adeclarer
4645	#ifdef CPP_COSP
4646	IF (itap.eq.1.or.MOD(itap,NINT(freq_cosp/phys_tstep)).EQ.0) THEN
4647
4648	IF (prt_level .GE.10) THEN
4649	print*,'freq_cosp',freq_cosp
4650	ENDIF
4651	mr_ozone=wo(:, :, 1) * dobson_u * 1e3 / zmasse
4652	! print*,'Dans physiq.F avant appel cosp ref_liq,ref_ice=',
4653	! s ref_liq,ref_ice
4654	CALL phys_cosp(itap,phys_tstep,freq_cosp, &
4655	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
4656	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
4657	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
4658	JrNt,ref_liq,ref_ice, &
4659	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
4660	zu10m,zv10m,pphis, &
4661	zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, &
4662	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
4663	prfl(:,1:klev),psfl(:,1:klev), &
4664	pmflxr(:,1:klev),pmflxs(:,1:klev), &
4665	mr_ozone,cldtau, cldemi)
4666
4667	! L calipso2D,calipso3D,cfadlidar,parasolrefl,atb,betamol,
4668	! L cfaddbze,clcalipso2,dbze,cltlidarradar,
4669	! M clMISR,
4670	! R clisccp2,boxtauisccp,boxptopisccp,tclisccp,ctpisccp,
4671	! I tauisccp,albisccp,meantbisccp,meantbclrisccp)
4672
4673	ENDIF
4674	#endif
4675
4676	#ifdef CPP_COSP2
4677	IF (itap.eq.1.or.MOD(itap,NINT(freq_cosp/phys_tstep)).EQ.0) THEN
4678
4679	IF (prt_level .GE.10) THEN
4680	print*,'freq_cosp',freq_cosp
4681	ENDIF
4682	mr_ozone=wo(:, :, 1) * dobson_u * 1e3 / zmasse
4683	print*,'Dans physiq.F avant appel '
4684	! s ref_liq,ref_ice
4685	CALL phys_cosp2(itap,phys_tstep,freq_cosp, &
4686	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
4687	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
4688	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
4689	JrNt,ref_liq,ref_ice, &
4690	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
4691	zu10m,zv10m,pphis, &
4692	zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, &
4693	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
4694	prfl(:,1:klev),psfl(:,1:klev), &
4695	pmflxr(:,1:klev),pmflxs(:,1:klev), &
4696	mr_ozone,cldtau, cldemi)
4697	ENDIF
4698	#endif
4699
4700	#ifdef CPP_COSPV2
4701	IF (itap.eq.1.or.MOD(itap,NINT(freq_cosp/phys_tstep)).EQ.0) THEN
4702	! IF (MOD(itap,NINT(freq_cosp/phys_tstep)).EQ.0) THEN
4703
4704	IF (prt_level .GE.10) THEN
4705	print*,'freq_cosp',freq_cosp
4706	ENDIF
4707	DO k = 1, klev
4708	DO i = 1, klon
4709	phicosp(i,k) = pphi(i,k) + pphis(i)
4710	ENDDO
4711	ENDDO
4712	mr_ozone=wo(:, :, 1) * dobson_u * 1e3 / zmasse
4713	print*,'Dans physiq.F avant appel '
4714	! s ref_liq,ref_ice
4715	CALL lmdz_cosp_interface(itap,phys_tstep,freq_cosp, &
4716	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
4717	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
4718	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
4719	JrNt,ref_liq,ref_ice, &
4720	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
4721	zu10m,zv10m,pphis, &
4722	zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, &
4723	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
4724	prfl(:,1:klev),psfl(:,1:klev), &
4725	pmflxr(:,1:klev),pmflxs(:,1:klev), &
4726	mr_ozone,cldtau, cldemi)
4727	ENDIF
4728	#endif
4729
4730	ENDIF !ok_cosp
4731
4732
4733	! Marine
4734
4735	IF (ok_airs) then
4736
4737	IF (itap.eq.1.or.MOD(itap,NINT(freq_airs/phys_tstep)).EQ.0) THEN
4738	write(,) 'je vais appeler simu_airs, ok_airs, freq_airs=', ok_airs, freq_airs
4739	CALL simu_airs(itap,rneb, t_seri, cldemi, fiwc, ref_ice, pphi, pplay, paprs,&
4740	& map_prop_hc,map_prop_hist,&
4741	& map_emis_hc,map_iwp_hc,map_deltaz_hc,map_pcld_hc,map_tcld_hc,&
4742	& map_emis_Cb,map_pcld_Cb,map_tcld_Cb,&
4743	& map_emis_ThCi,map_pcld_ThCi,map_tcld_ThCi,&
4744	& map_emis_Anv,map_pcld_Anv,map_tcld_Anv,&
4745	& map_emis_hist,map_iwp_hist,map_deltaz_hist,map_rad_hist,&
4746	& map_ntot,map_hc,map_hist,&
4747	& map_Cb,map_ThCi,map_Anv,&
4748	& alt_tropo )
4749	ENDIF
4750
4751	ENDIF ! ok_airs
4752
4753
4754	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
4755	!AA
4756	!AA Installation de l'interface online-offline pour traceurs
4757	!AA
4758	!====================================================================
4759	! Calcul des tendances traceurs
4760	!====================================================================
4761	!
4762
4763	IF (type_trac=='repr') THEN
4764	!MM pas d'impact, car on recupere q_seri,tr_seri,t_seri via phys_local_var_mod
4765	!MM dans Reprobus
4766	sh_in(:,:) = q_seri(:,:)
4767	#ifdef REPROBUS
4768	d_q_rep(:,:) = 0.
4769	d_ql_rep(:,:) = 0.
4770	d_qi_rep(:,:) = 0.
4771	#endif
4772	ELSE
4773	sh_in(:,:) = qx(:,:,ivap)
4774	ch_in(:,:) = qx(:,:,iliq)
4775	ENDIF
4776
4777	IF (iflag_phytrac == 1 ) THEN
4778
4779	#ifdef CPP_Dust
4780	CALL phytracr_spl ( debut,lafin , jD_cur,jH_cur,iflag_con, & ! I
4781	pdtphys,ftsol, & ! I
4782	t,q_seri,paprs,pplay,RHcl, & ! I
4783	pmfu, pmfd, pen_u, pde_u, pen_d, pde_d, & ! I
4784	coefh(1:klon,1:klev,is_ave), cdragh, cdragm, u1, v1, & ! I
4785	u_seri, v_seri, latitude_deg, longitude_deg, &
4786	pphis,pctsrf,pmflxr,pmflxs,prfl,psfl, & ! I
4787	da,phi,phi2,d1a,dam,mp,ep,sigd,sij,clw,elij, & ! I
4788	epmlmMm,eplaMm,upwd,dnwd,itop_con,ibas_con, & ! I
4789	ev,wdtrainA, wdtrainM,wght_cvfd, & ! I
4790	fm_therm, entr_therm, rneb, & ! I
4791	beta_prec_fisrt,beta_prec, & !I
4792	zu10m,zv10m,wstar,ale_bl,ale_wake, & ! I
4793	d_tr_dyn,tr_seri)
4794
4795	#else
4796
4797	CALL phytrac ( &
4798	itap, days_elapsed+1, jH_cur, debut, &
4799	lafin, phys_tstep, u, v, t, &
4800	paprs, pplay, pmfu, pmfd, &
4801	pen_u, pde_u, pen_d, pde_d, &
4802	cdragh, coefh(1:klon,1:klev,is_ave), fm_therm, entr_therm, &
4803	u1, v1, ftsol, pctsrf, &
4804	zustar, zu10m, zv10m, &
4805	wstar(:,is_ave), ale_bl, ale_wake, &
4806	latitude_deg, longitude_deg, &
4807	frac_impa,frac_nucl, beta_prec_fisrt,beta_prec, &
4808	presnivs, pphis, pphi, albsol1, &
4809	sh_in, ch_in, rhcl, cldfra, rneb, &
4810	diafra, cldliq, itop_con, ibas_con, &
4811	pmflxr, pmflxs, prfl, psfl, &
4812	da, phi, mp, upwd, &
4813	phi2, d1a, dam, sij, wght_cvfd, & !<<RomP+RL
4814	wdtrainA, wdtrainM, sigd, clw,elij, & !<<RomP
4815	ev, ep, epmlmMm, eplaMm, & !<<RomP
4816	dnwd, aerosol_couple, flxmass_w, &
4817	tau_aero, piz_aero, cg_aero, ccm, &
4818	rfname, &
4819	d_tr_dyn, & !<<RomP
4820	tr_seri, init_source)
4821	#ifdef REPROBUS
4822
4823
4824	print*,'avt add phys rep',abortphy
4825
4826	CALL add_phys_tend &
4827	(du0,dv0,dt0,d_q_rep,d_ql_rep,d_qi_rep,paprs,&
4828	'rep',abortphy,flag_inhib_tend,itap,0)
4829	IF (abortphy==1) Print*,'ERROR ABORT REP'
4830
4831	print*,'apr add phys rep',abortphy
4832
4833	#endif
4834
4835	#endif
4836	ENDIF ! (iflag_phytrac=1)
4837
4838	IF (offline) THEN
4839
4840	IF (prt_level.ge.9) &
4841	print*,'Attention on met a 0 les thermiques pour phystoke'
4842	CALL phystokenc ( &
4843	nlon,klev,pdtphys,longitude_deg,latitude_deg, &
4844	t,pmfu, pmfd, pen_u, pde_u, pen_d, pde_d, &
4845	fm_therm,entr_therm, &
4846	cdragh,coefh(1:klon,1:klev,is_ave),u1,v1,ftsol,pctsrf, &
4847	frac_impa, frac_nucl, &
4848	pphis,cell_area,phys_tstep,itap, &
4849	qx(:,:,ivap),da,phi,mp,upwd,dnwd)
4850
4851
4852	ENDIF
4853
4854	!
4855	! Calculer le transport de l'eau et de l'energie (diagnostique)
4856	!
4857	CALL transp (paprs,zxtsol, &
4858	t_seri, q_seri, ql_seri, qs_seri, u_seri, v_seri, zphi, &
4859	ve, vq, ue, uq, vwat, uwat)
4860	!
4861	!IM global posePB BEG
4862	IF(1.EQ.0) THEN
4863	!
4864	CALL transp_lay (paprs,zxtsol, &
4865	t_seri, q_seri, u_seri, v_seri, zphi, &
4866	ve_lay, vq_lay, ue_lay, uq_lay)
4867	!
4868	ENDIF !(1.EQ.0) THEN
4869	!IM global posePB END
4870	! Accumuler les variables a stocker dans les fichiers histoire:
4871	!
4872
4873	!================================================================
4874	! Conversion of kinetic and potential energy into heat, for
4875	! parameterisation of subgrid-scale motions
4876	!================================================================
4877
4878	d_t_ec(:,:)=0.
4879	forall (k=1: nbp_lev) exner(:, k) = (pplay(:, k)/paprs(:,1))**RKAPPA
4880	CALL ener_conserv(klon,klev,pdtphys,u,v,t,qx(:,:,ivap),qx(:,:,iliq),qx(:,:,isol), &
4881	u_seri,v_seri,t_seri,q_seri,ql_seri,qs_seri,pbl_tke(:,:,is_ave)-tke0(:,:), &
4882	zmasse,exner,d_t_ec)
4883	t_seri(:,:)=t_seri(:,:)+d_t_ec(:,:)
4884
4885	!=======================================================================
4886	! SORTIES
4887	!=======================================================================
4888	!
4889	!IM initialisation + calculs divers diag AMIP2
4890	!
4891	include "calcul_divers.h"
4892	!
4893	!IM Interpolation sur les niveaux de pression du NMC
4894	! -------------------------------------------------
4895	!
4896	include "calcul_STDlev.h"
4897	!
4898	! slp sea level pressure derived from Arpege-IFS : CALL ctstar + CALL pppmer
4899	CALL diag_slp(klon,t_seri,paprs,pplay,pphis,ptstar,pt0,slp)
4900	!
4901	!cc prw = eau precipitable
4902	! prlw = colonne eau liquide
4903	! prlw = colonne eau solide
4904	prw(:) = 0.
4905	prlw(:) = 0.
4906	prsw(:) = 0.
4907	DO k = 1, klev
4908	prw(:) = prw(:) + q_seri(:,k)*zmasse(:,k)
4909	prlw(:) = prlw(:) + ql_seri(:,k)*zmasse(:,k)
4910	prsw(:) = prsw(:) + qs_seri(:,k)*zmasse(:,k)
4911	ENDDO
4912	!
4913	IF (type_trac == 'inca') THEN
4914	#ifdef INCA
4915	CALL VTe(VTphysiq)
4916	CALL VTb(VTinca)
4917
4918	CALL chemhook_end ( &
4919	phys_tstep, &
4920	pplay, &
4921	t_seri, &
4922	tr_seri, &
4923	nbtr, &
4924	paprs, &
4925	q_seri, &
4926	cell_area, &
4927	pphi, &
4928	pphis, &
4929	zx_rh, &
4930	aps, bps, ap, bp)
4931
4932	CALL VTe(VTinca)
4933	CALL VTb(VTphysiq)
4934	#endif
4935	ENDIF
4936
4937
4938	!
4939	! Convertir les incrementations en tendances
4940	!
4941	IF (prt_level .GE.10) THEN
4942	print *,'Convertir les incrementations en tendances '
4943	ENDIF
4944	!
4945	IF (mydebug) THEN
4946	CALL writefield_phy('u_seri',u_seri,nbp_lev)
4947	CALL writefield_phy('v_seri',v_seri,nbp_lev)
4948	CALL writefield_phy('t_seri',t_seri,nbp_lev)
4949	CALL writefield_phy('q_seri',q_seri,nbp_lev)
4950	ENDIF
4951
4952	DO k = 1, klev
4953	DO i = 1, klon
4954	d_u(i,k) = ( u_seri(i,k) - u(i,k) ) / phys_tstep
4955	d_v(i,k) = ( v_seri(i,k) - v(i,k) ) / phys_tstep
4956	d_t(i,k) = ( t_seri(i,k)-t(i,k) ) / phys_tstep
4957	d_qx(i,k,ivap) = ( q_seri(i,k) - qx(i,k,ivap) ) / phys_tstep
4958	d_qx(i,k,iliq) = ( ql_seri(i,k) - qx(i,k,iliq) ) / phys_tstep
4959	!CR: on ajoute le contenu en glace
4960	IF (nqo.eq.3) THEN
4961	d_qx(i,k,isol) = ( qs_seri(i,k) - qx(i,k,isol) ) / phys_tstep
4962	ENDIF
4963	ENDDO
4964	ENDDO
4965	!
4966	!CR: nb de traceurs eau: nqo
4967	! IF (nqtot.GE.3) THEN
4968	IF (nqtot.GE.(nqo+1)) THEN
4969	! DO iq = 3, nqtot
4970	DO iq = nqo+1, nqtot
4971	DO k = 1, klev
4972	DO i = 1, klon
4973	! d_qx(i,k,iq) = ( tr_seri(i,k,iq-2) - qx(i,k,iq) ) / phys_tstep
4974	d_qx(i,k,iq) = ( tr_seri(i,k,iq-nqo) - qx(i,k,iq) ) / phys_tstep
4975	ENDDO
4976	ENDDO
4977	ENDDO
4978	ENDIF
4979	!
4980	!IM rajout diagnostiques bilan KP pour analyse MJO par Jun-Ichi Yano
4981	!IM global posePB include "write_bilKP_ins.h"
4982	!IM global posePB include "write_bilKP_ave.h"
4983	!
4984
4985	!--OB mass fixer
4986	!--profile is corrected to force mass conservation of water
4987	IF (mass_fixer) THEN
4988	qql2(:)=0.0
4989	DO k = 1, klev
4990	qql2(:)=qql2(:)+(q_seri(:,k)+ql_seri(:,k)+qs_seri(:,k))*zmasse(:,k)
4991	ENDDO
4992	DO i = 1, klon
4993	!--compute ratio of what q+ql should be with conservation to what it is
4994	corrqql=(qql1(i)+(evap(i)-rain_fall(i)-snow_fall(i))*pdtphys)/qql2(i)
4995	DO k = 1, klev
4996	q_seri(i,k) =q_seri(i,k)*corrqql
4997	ql_seri(i,k)=ql_seri(i,k)*corrqql
4998	ENDDO
4999	ENDDO
5000	ENDIF
5001	!--fin mass fixer
5002
5003	! Sauvegarder les valeurs de t et q a la fin de la physique:
5004	!
5005	u_ancien(:,:) = u_seri(:,:)
5006	v_ancien(:,:) = v_seri(:,:)
5007	t_ancien(:,:) = t_seri(:,:)
5008	q_ancien(:,:) = q_seri(:,:)
5009	ql_ancien(:,:) = ql_seri(:,:)
5010	qs_ancien(:,:) = qs_seri(:,:)
5011	CALL water_int(klon,klev,q_ancien,zmasse,prw_ancien)
5012	CALL water_int(klon,klev,ql_ancien,zmasse,prlw_ancien)
5013	CALL water_int(klon,klev,qs_ancien,zmasse,prsw_ancien)
5014	! !! RomP >>>
5015	!CR: nb de traceurs eau: nqo
5016	IF (nqtot.GT.nqo) THEN
5017	DO iq = nqo+1, nqtot
5018	tr_ancien(:,:,iq-nqo) = tr_seri(:,:,iq-nqo)
5019	ENDDO
5020	ENDIF
5021	! !! RomP <<<
5022	!==========================================================================
5023	! Sorties des tendances pour un point particulier
5024	! a utiliser en 1D, avec igout=1 ou en 3D sur un point particulier
5025	! pour le debug
5026	! La valeur de igout est attribuee plus haut dans le programme
5027	!==========================================================================
5028
5029	IF (prt_level.ge.1) THEN
5030	write(lunout,*) 'FIN DE PHYSIQ !!!!!!!!!!!!!!!!!!!!'
5031	write(lunout,*) &
5032	'nlon,klev,nqtot,debut,lafin,jD_cur, jH_cur, pdtphys pct tlos'
5033	write(lunout,*) &
5034	nlon,klev,nqtot,debut,lafin, jD_cur, jH_cur ,pdtphys, &
5035	pctsrf(igout,is_ter), pctsrf(igout,is_lic),pctsrf(igout,is_oce), &
5036	pctsrf(igout,is_sic)
5037	write(lunout,*) 'd_t_dyn,d_t_con,d_t_lsc,d_t_ajsb,d_t_ajs,d_t_eva'
5038	DO k=1,klev
5039	write(lunout,*) d_t_dyn(igout,k),d_t_con(igout,k), &
5040	d_t_lsc(igout,k),d_t_ajsb(igout,k),d_t_ajs(igout,k), &
5041	d_t_eva(igout,k)
5042	ENDDO
5043	write(lunout,*) 'cool,heat'
5044	DO k=1,klev
5045	write(lunout,*) cool(igout,k),heat(igout,k)
5046	ENDDO
5047
5048	!jyg< (En attendant de statuer sur le sort de d_t_oli)
5049	!jyg! write(lunout,*) 'd_t_oli,d_t_vdf,d_t_oro,d_t_lif,d_t_ec'
5050	!jyg! do k=1,klev
5051	!jyg! write(lunout,*) d_t_oli(igout,k),d_t_vdf(igout,k), &
5052	!jyg! d_t_oro(igout,k),d_t_lif(igout,k),d_t_ec(igout,k)
5053	!jyg! enddo
5054	write(lunout,*) 'd_t_vdf,d_t_oro,d_t_lif,d_t_ec'
5055	DO k=1,klev
5056	write(lunout,*) d_t_vdf(igout,k), &
5057	d_t_oro(igout,k),d_t_lif(igout,k),d_t_ec(igout,k)
5058	ENDDO
5059	!>jyg
5060
5061	write(lunout,*) 'd_ps ',d_ps(igout)
5062	write(lunout,*) 'd_u, d_v, d_t, d_qx1, d_qx2 '
5063	DO k=1,klev
5064	write(lunout,*) d_u(igout,k),d_v(igout,k),d_t(igout,k), &
5065	d_qx(igout,k,1),d_qx(igout,k,2)
5066	ENDDO
5067	ENDIF
5068
5069	!============================================================
5070	! Calcul de la temperature potentielle
5071	!============================================================
5072	DO k = 1, klev
5073	DO i = 1, klon
5074	!JYG/IM theta en debut du pas de temps
5075	!JYG/IM theta(i,k)=t(i,k)(100000./pplay(i,k))*(RD/RCPD)
5076	!JYG/IM theta en fin de pas de temps de physique
5077	theta(i,k)=t_seri(i,k)(100000./pplay(i,k))*(RD/RCPD)
5078	! thetal: 2 lignes suivantes a decommenter si vous avez les fichiers
5079	! MPL 20130625
5080	! fth_fonctions.F90 et parkind1.F90
5081	! sinon thetal=theta
5082	! thetal(i,k)=fth_thetal(pplay(i,k),t_seri(i,k),q_seri(i,k),
5083	! : ql_seri(i,k))
5084	thetal(i,k)=theta(i,k)
5085	ENDDO
5086	ENDDO
5087	!
5088
5089	! 22.03.04 BEG
5090	!=============================================================
5091	! Ecriture des sorties
5092	!=============================================================
5093	#ifdef CPP_IOIPSL
5094
5095	! Recupere des varibles calcule dans differents modules
5096	! pour ecriture dans histxxx.nc
5097
5098	! Get some variables from module fonte_neige_mod
5099	CALL fonte_neige_get_vars(pctsrf, &
5100	zxfqcalving, zxfqfonte, zxffonte, zxrunofflic)
5101
5102
5103	!=============================================================
5104	! Separation entre thermiques et non thermiques dans les sorties
5105	! de fisrtilp
5106	!=============================================================
5107
5108	IF (iflag_thermals>=1) THEN
5109	d_t_lscth=0.
5110	d_t_lscst=0.
5111	d_q_lscth=0.
5112	d_q_lscst=0.
5113	DO k=1,klev
5114	DO i=1,klon
5115	IF (ptconvth(i,k)) THEN
5116	d_t_lscth(i,k)=d_t_eva(i,k)+d_t_lsc(i,k)
5117	d_q_lscth(i,k)=d_q_eva(i,k)+d_q_lsc(i,k)
5118	ELSE
5119	d_t_lscst(i,k)=d_t_eva(i,k)+d_t_lsc(i,k)
5120	d_q_lscst(i,k)=d_q_eva(i,k)+d_q_lsc(i,k)
5121	ENDIF
5122	ENDDO
5123	ENDDO
5124
5125	DO i=1,klon
5126	plul_st(i)=prfl(i,lmax_th(i)+1)+psfl(i,lmax_th(i)+1)
5127	plul_th(i)=prfl(i,1)+psfl(i,1)
5128	ENDDO
5129	ENDIF
5130
5131	!On effectue les sorties:
5132
5133	#ifdef CPP_Dust
5134	CALL phys_output_write_spl(itap, pdtphys, paprs, pphis, &
5135	pplay, lmax_th, aerosol_couple, &
5136	ok_ade, ok_aie, ivap, ok_sync, &
5137	ptconv, read_climoz, clevSTD, &
5138	ptconvth, d_t, qx, d_qx, d_tr_dyn, zmasse, &
5139	flag_aerosol, flag_aerosol_strat, ok_cdnc)
5140	#else
5141	CALL phys_output_write(itap, pdtphys, paprs, pphis, &
5142	pplay, lmax_th, aerosol_couple, &
5143	ok_ade, ok_aie, ok_volcan, ivap, iliq, isol, &
5144	ok_sync, ptconv, read_climoz, clevSTD, &
5145	ptconvth, d_u, d_t, qx, d_qx, zmasse, &
5146	flag_aerosol, flag_aerosol_strat, ok_cdnc)
5147	#endif
5148
5149	#ifndef CPP_XIOS
5150	CALL write_paramLMDZ_phy(itap,nid_ctesGCM,ok_sync)
5151	#endif
5152
5153	#endif
5154
5155	! On remet des variables a .false. apres un premier appel
5156	IF (debut) THEN
5157	#ifdef CPP_XIOS
5158	swaero_diag=.FALSE.
5159	swaerofree_diag=.FALSE.
5160	dryaod_diag=.FALSE.
5161	ok_4xCO2atm= .FALSE.
5162	! write (lunout,*)'ok_4xCO2atm= ',swaero_diag, swaerofree_diag, dryaod_diag, ok_4xCO2atm
5163
5164	IF (is_master) THEN
5165	!--setting up swaero_diag to TRUE in XIOS case
5166	IF (xios_field_is_active("topswad").OR.xios_field_is_active("topswad0").OR. &
5167	xios_field_is_active("solswad").OR.xios_field_is_active("solswad0").OR. &
5168	xios_field_is_active("topswai").OR.xios_field_is_active("solswai").OR. &
5169	(iflag_rrtm==1.AND.(xios_field_is_active("toplwad").OR.xios_field_is_active("toplwad0").OR. &
5170	xios_field_is_active("sollwad").OR.xios_field_is_active("sollwad0")))) &
5171	!!!--for now these fields are not in the XML files so they are omitted
5172	!!! xios_field_is_active("toplwai").OR.xios_field_is_active("sollwai") !))) &
5173	swaero_diag=.TRUE.
5174
5175	!--setting up swaerofree_diag to TRUE in XIOS case
5176	IF (xios_field_is_active("SWdnSFCcleanclr").OR.xios_field_is_active("SWupSFCcleanclr").OR. &
5177	xios_field_is_active("SWupTOAcleanclr").OR.xios_field_is_active("rsucsaf").OR. &
5178	xios_field_is_active("rsdcsaf") .OR. xios_field_is_active("LWdnSFCcleanclr").OR. &
5179	xios_field_is_active("LWupTOAcleanclr")) &
5180	swaerofree_diag=.TRUE.
5181
5182	!--setting up dryaod_diag to TRUE in XIOS case
5183	DO naero = 1, naero_tot-1
5184	IF (xios_field_is_active("dryod550_"//name_aero_tau(naero))) dryaod_diag=.TRUE.
5185	ENDDO
5186	!
5187	!--setting up ok_4xCO2atm to TRUE in XIOS case
5188	IF (xios_field_is_active("rsut4co2").OR.xios_field_is_active("rlut4co2").OR. &
5189	xios_field_is_active("rsutcs4co2").OR.xios_field_is_active("rlutcs4co2").OR. &
5190	xios_field_is_active("rsu4co2").OR.xios_field_is_active("rsucs4co2").OR. &
5191	xios_field_is_active("rsd4co2").OR.xios_field_is_active("rsdcs4co2").OR. &
5192	xios_field_is_active("rlu4co2").OR.xios_field_is_active("rlucs4co2").OR. &
5193	xios_field_is_active("rld4co2").OR.xios_field_is_active("rldcs4co2")) &
5194	ok_4xCO2atm=.TRUE.
5195	ENDIF
5196	!$OMP BARRIER
5197	CALL bcast(swaero_diag)
5198	CALL bcast(swaerofree_diag)
5199	CALL bcast(dryaod_diag)
5200	CALL bcast(ok_4xCO2atm)
5201	! write (lunout,*)'ok_4xCO2atm= ',swaero_diag, swaerofree_diag, dryaod_diag, ok_4xCO2atm
5202	#endif
5203	ENDIF
5204
5205	!====================================================================
5206	! Arret du modele apres hgardfou en cas de detection d'un
5207	! plantage par hgardfou
5208	!====================================================================
5209
5210	IF (abortphy==1) THEN
5211	abort_message ='Plantage hgardfou'
5212	CALL abort_physic (modname,abort_message,1)
5213	ENDIF
5214
5215	! 22.03.04 END
5216	!
5217	!====================================================================
5218	! Si c'est la fin, il faut conserver l'etat de redemarrage
5219	!====================================================================
5220	!
5221
5222	IF (lafin) THEN
5223	itau_phy = itau_phy + itap
5224	CALL phyredem ("restartphy.nc")
5225	! open(97,form="unformatted",file="finbin")
5226	! write(97) u_seri,v_seri,t_seri,q_seri
5227	! close(97)
5228
5229	IF (is_omp_master) THEN
5230
5231	IF (read_climoz >= 1) THEN
5232	IF (is_mpi_root) CALL nf95_close(ncid_climoz)
5233	DEALLOCATE(press_edg_climoz) ! pointer
5234	DEALLOCATE(press_cen_climoz) ! pointer
5235	ENDIF
5236
5237	ENDIF
5238	#ifdef CPP_XIOS
5239	IF (is_omp_master) CALL xios_context_finalize
5240	#endif
5241	WRITE(lunout,*) ' physiq fin, nombre de steps ou cvpas = 1 : ', Ncvpaseq1
5242	ENDIF
5243
5244	! first=.false.
5245
5246	END SUBROUTINE physiq
5247
5248	END MODULE physiq_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format