Context Navigation

physiq_mod.F90 @ 4476

Last change on this file since 4476 was 4466, checked in by evignon, 18 months ago
fixing bug about previous commit on SSO activation
Property copyright set to Name of program: LMDZ Creation date: 1984 Version: LMDZ5 License: CeCILL version 2 Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539 See the license file in the root directory Property svn:eol-style set to `native` Property svn:keywords set to `Id`
File size: 192.6 KB

Rev	Line
[2418]	1	!
[1279]	2	! $Id: physiq_mod.F90 4466 2023-03-09 21:34:39Z musat $
[2418]	3	!
[1862]	4	!#define IO_DEBUG
[2418]	5	MODULE physiq_mod
[766]	6
[2469]	7	IMPLICIT NONE
[2418]	8
	9	CONTAINS
	10
[2469]	11	SUBROUTINE physiq (nlon,nlev, &
	12	debut,lafin,pdtphys_, &
	13	paprs,pplay,pphi,pphis,presnivs, &
	14	u,v,rot,t,qx, &
	15	flxmass_w, &
	16	d_u, d_v, d_t, d_qx, d_ps)
[524]	17
[3776]	18	! For clarity, the "USE" section is now arranged in alphabetical order,
	19	! with a separate section for CPP keys
	20	! PLEASE try to follow this rule
	21
	22	USE ACAMA_GWD_rando_m, only: ACAMA_GWD_rando
	23	USE aero_mod
	24	USE add_phys_tend_mod, only : add_pbl_tend, add_phys_tend, diag_phys_tend, prt_enerbil, &
	25	& fl_ebil, fl_cor_ebil
[3387]	26	USE assert_m, only: assert
[3776]	27	USE change_srf_frac_mod
	28	USE conf_phys_m, only: conf_phys
	29	USE carbon_cycle_mod, ONLY : infocfields_init, RCO2_glo, carbon_cycle_rad
	30	USE CFMIP_point_locations ! IM stations CFMIP
	31	USE cmp_seri_mod
	32	USE dimphy
	33	USE etat0_limit_unstruct_mod
	34	USE FLOTT_GWD_rando_m, only: FLOTT_GWD_rando
	35	USE fonte_neige_mod, ONLY : fonte_neige_get_vars
[4367]	36	USE geometry_mod, ONLY: cell_area, latitude_deg, longitude_deg
[2469]	37	USE ioipsl, only: histbeg, histvert, histdef, histend, histsync, &
	38	histwrite, ju2ymds, ymds2ju, getin
[3776]	39	USE ioipsl_getin_p_mod, ONLY : getin_p
	40	USE indice_sol_mod
[4389]	41	USE infotrac_phy, ONLY: nqtot, nbtr, nqo, tracers, type_trac
[4069]	42	USE readTracFiles_mod, ONLY: addPhase
[4056]	43	USE strings_mod, ONLY: strIdx
[3776]	44	USE iophy
	45	USE limit_read_mod, ONLY : init_limit_read
[3435]	46	USE mod_grid_phy_lmdz, ONLY: nbp_lon, nbp_lat, nbp_lev, klon_glo, grid1dTo2d_glo, grid_type, unstructured
[3776]	47	USE mod_phys_lmdz_mpi_data, only: is_mpi_root
[2469]	48	USE mod_phys_lmdz_para
[3776]	49	USE netcdf95, only: nf95_close
	50	USE netcdf, only: nf90_fill_real ! IM for NMC files
	51	USE open_climoz_m, only: open_climoz ! ozone climatology from a file
	52	USE ozonecm_m, only: ozonecm ! ozone of J.-F. Royer
	53	USE pbl_surface_mod, ONLY : pbl_surface
	54	USE phyaqua_mod, only: zenang_an
[4358]	55	USE phyetat0_mod, only: phyetat0
[3776]	56	USE phystokenc_mod, ONLY: offline, phystokenc
	57	USE phys_cal_mod, only: year_len, mth_len, days_elapsed, jh_1jan, &
[4127]	58	year_cur, mth_cur,jD_cur, jH_cur, jD_ref, day_cur, hour, calend
[3776]	59	!! USE phys_local_var_mod, ONLY : a long list of variables
	60	!! ==> see below, after "CPP Keys" section
	61	USE phys_state_var_mod ! Variables sauvegardees de la physique
	62	USE phys_output_mod
	63	USE phys_output_ctrlout_mod
[3981]	64	USE print_control_mod, ONLY: mydebug=>debug , lunout, prt_level, &
	65	alert_first_call, call_alert, prt_alerte
[3776]	66	USE readaerosol_mod, ONLY : init_aero_fromfile
	67	USE readaerosolstrato_m, ONLY : init_readaerosolstrato
	68	USE radlwsw_m, only: radlwsw
	69	USE regr_horiz_time_climoz_m, ONLY: regr_horiz_time_climoz
	70	USE regr_pr_time_av_m, only: regr_pr_time_av
[4367]	71	USE surface_data, ONLY : type_ocean, ok_veget
	72	USE time_phylmdz_mod, only: current_time, itau_phy, pdtphys, raz_date, update_time
[3776]	73	USE tracinca_mod, ONLY: config_inca
[2788]	74	USE tropopause_m, ONLY: dyn_tropopause
[4059]	75	USE ice_sursat_mod, ONLY: flight_init, airplane
[3776]	76	USE vampir
	77	USE write_field_phy
[4236]	78	#ifdef CPP_XIOS
	79	USE wxios, ONLY: g_ctx, wxios_set_context
	80	#endif
[3999]	81	USE lscp_mod, ONLY : lscp
[4085]	82	USE wake_ini_mod, ONLY : wake_ini
[4448]	83	USE yamada_ini_mod, ONLY : yamada_ini
[4449]	84	USE atke_turbulence_ini_mod, ONLY : atke_ini
[4089]	85	USE thermcell_ini_mod, ONLY : thermcell_ini
[4380]	86	USE lscp_ini_mod, ONLY : lscp_ini
[3776]	87
	88	!USE cmp_seri_mod
	89	! USE add_phys_tend_mod, only : add_pbl_tend, add_phys_tend, diag_phys_tend, prt_enerbil, &
	90	! & fl_ebil, fl_cor_ebil
	91
	92	!!!!!!!!!!!!!!!!!! "USE" section for CPP keys !!!!!!!!!!!!!!!!!!!!!!!!
	93	!
	94	!
[2630]	95	#ifdef CPP_Dust
[3776]	96	USE phytracr_spl_mod, ONLY: phytracr_spl, phytracr_spl_out_init
	97	USE phys_output_write_spl_mod
	98	#else
	99	USE phytrac_mod, ONLY : phytrac_init, phytrac
	100	USE phys_output_write_mod
[2630]	101	#endif
[3776]	102
	103
[4367]	104	#ifdef INCA
	105	USE geometry_mod, ONLY: longitude, latitude, boundslon, boundslat, ind_cell_glo
	106	USE time_phylmdz_mod, ONLY: ndays
	107	USE infotrac_phy, ONLY: nqCO2
	108	#endif
[3776]	109	#ifdef REPROBUS
[4367]	110	USE chem_rep, ONLY: Init_chem_rep_xjour, d_q_rep, d_ql_rep, d_qi_rep, &
	111	ptrop, ttrop, ztrop, gravit, itroprep, Z1, Z2, fac, B
[3776]	112	#endif
[4367]	113	#if defined INCA \|\| defined REPROBUS
	114	USE time_phylmdz_mod, ONLY: annee_ref, day_ini, day_ref, start_time
	115	USE vertical_layers_mod, ONLY: aps, bps, ap, bp
	116	#endif
[3776]	117
	118
	119	#ifdef CPP_RRTM
	120	USE YOERAD, ONLY : NRADLP
[4367]	121	! USE YOESW, ONLY : RSUN
[3776]	122	#endif
	123
	124
[3522]	125	#ifdef CPP_StratAer
	126	USE strataer_mod, ONLY: strataer_init
	127	#endif
[3776]	128
	129
	130	#ifdef CPP_XIOS
[4236]	131	USE xios, ONLY: xios_update_calendar, xios_context_finalize
	132	USE xios, ONLY: xios_get_field_attr, xios_field_is_active, xios_context
	133	USE xios, ONLY: xios_set_current_context
[3776]	134	USE wxios, ONLY: missing_val, missing_val_omp
	135	#endif
	136	#ifndef CPP_XIOS
	137	USE paramLMDZ_phy_mod
	138	#endif
	139	!
	140	!
	141	!!!!!!!!!!!!!!!!!! END "USE" for CPP keys !!!!!!!!!!!!!!!!!!!!!!
	142
	143	USE phys_local_var_mod, ONLY: phys_local_var_init, phys_local_var_end, &
[2606]	144	! [Variables internes non sauvegardees de la physique]
	145	! Variables locales pour effectuer les appels en serie
[4059]	146	t_seri,q_seri,ql_seri,qs_seri,u_seri,v_seri,tr_seri,rneb_seri, &
[2606]	147	! Dynamic tendencies (diagnostics)
[4059]	148	d_t_dyn,d_q_dyn,d_ql_dyn,d_qs_dyn,d_u_dyn,d_v_dyn,d_tr_dyn,d_rneb_dyn, &
[2606]	149	d_q_dyn2d,d_ql_dyn2d,d_qs_dyn2d, &
	150	! Physic tendencies
	151	d_t_con,d_q_con,d_u_con,d_v_con, &
	152	d_tr, & !! to be removed?? (jyg)
	153	d_t_wake,d_q_wake, &
	154	d_t_lwr,d_t_lw0,d_t_swr,d_t_sw0, &
	155	d_t_ajsb,d_q_ajsb, &
	156	d_t_ajs,d_q_ajs,d_u_ajs,d_v_ajs, &
[4367]	157	! d_t_ajs_w,d_q_ajs_w, &
	158	! d_t_ajs_x,d_q_ajs_x, &
[2606]	159	!
[2705]	160	d_t_eva,d_q_eva,d_ql_eva,d_qi_eva, &
[2606]	161	d_t_lsc,d_q_lsc,d_ql_lsc,d_qi_lsc, &
	162	d_t_lscst,d_q_lscst, &
	163	d_t_lscth,d_q_lscth, &
	164	plul_st,plul_th, &
	165	!
	166	d_t_vdf,d_q_vdf,d_u_vdf,d_v_vdf,d_t_diss, &
[4056]	167	d_t_vdf_x, d_t_vdf_w, &
	168	d_q_vdf_x, d_q_vdf_w, &
[2606]	169	d_ts, &
	170	!
[4367]	171	! d_t_oli,d_u_oli,d_v_oli, &
[2606]	172	d_t_oro,d_u_oro,d_v_oro, &
[2897]	173	d_t_oro_gw,d_u_oro_gw,d_v_oro_gw, &
[2606]	174	d_t_lif,d_u_lif,d_v_lif, &
	175	d_t_ec, &
	176	!
	177	du_gwd_hines,dv_gwd_hines,d_t_hin, &
	178	dv_gwd_rando,dv_gwd_front, &
	179	east_gwstress,west_gwstress, &
	180	d_q_ch4, &
	181	! Special RRTM
	182	ZLWFT0_i,ZSWFT0_i,ZFLDN0, &
	183	ZFLUP0,ZFSDN0,ZFSUP0, &
	184	!
	185	topswad_aero,solswad_aero, &
	186	topswai_aero,solswai_aero, &
	187	topswad0_aero,solswad0_aero, &
	188	!LW additional
	189	toplwad_aero,sollwad_aero, &
	190	toplwai_aero,sollwai_aero, &
	191	toplwad0_aero,sollwad0_aero, &
	192	!
	193	topsw_aero,solsw_aero, &
	194	topsw0_aero,solsw0_aero, &
	195	topswcf_aero,solswcf_aero, &
	196	tausum_aero,tau3d_aero, &
[2854]	197	drytausum_aero, &
[2606]	198	!
	199	!variables CFMIP2/CMIP5
	200	topswad_aerop, solswad_aerop, &
	201	topswai_aerop, solswai_aerop, &
	202	topswad0_aerop, solswad0_aerop, &
	203	topsw_aerop, topsw0_aerop, &
	204	solsw_aerop, solsw0_aerop, &
	205	topswcf_aerop, solswcf_aerop, &
	206	!LW diagnostics
	207	toplwad_aerop, sollwad_aerop, &
	208	toplwai_aerop, sollwai_aerop, &
	209	toplwad0_aerop, sollwad0_aerop, &
	210	!
	211	ptstar, pt0, slp, &
	212	!
	213	bils, &
	214	!
	215	cldh, cldl,cldm, cldq, cldt, &
	216	JrNt, &
	217	dthmin, evap, fder, plcl, plfc, &
	218	prw, prlw, prsw, &
	219	s_lcl, s_pblh, s_pblt, s_therm, &
	220	cdragm, cdragh, &
	221	zustar, zu10m, zv10m, rh2m, qsat2m, &
[3817]	222	zq2m, zt2m, zn2mout, weak_inversion, &
[2606]	223	zt2m_min_mon, zt2m_max_mon, & ! pour calcul_divers.h
	224	t2m_min_mon, t2m_max_mon, & ! pour calcul_divers.h
	225	!
	226	s_pblh_x, s_pblh_w, &
	227	s_lcl_x, s_lcl_w, &
	228	!
	229	slab_wfbils, tpot, tpote, &
	230	ue, uq, ve, vq, zxffonte, &
[3257]	231	uwat, vwat, &
[2606]	232	zxfqcalving, zxfluxlat, &
	233	zxrunofflic, &
	234	zxtsol, snow_lsc, zxfqfonte, zxqsurf, &
[3888]	235	delta_qsurf, &
[2606]	236	rain_lsc, rain_num, &
	237	!
	238	sens_x, sens_w, &
	239	zxfluxlat_x, zxfluxlat_w, &
	240	!
[4009]	241	pbl_tke_input, tke_dissip, l_mix, wprime,&
[2606]	242	t_therm, q_therm, u_therm, v_therm, &
	243	cdragh_x, cdragh_w, &
	244	cdragm_x, cdragm_w, &
	245	kh, kh_x, kh_w, &
	246	!
[2730]	247	wake_k, &
[3080]	248	alp_wake, &
[2635]	249	wake_h, wake_omg, &
	250	! tendencies of delta T and delta q:
	251	d_deltat_wk, d_deltaq_wk, & ! due to wakes
	252	d_deltat_wk_gw, d_deltaq_wk_gw, & ! due to wake induced gravity waves
	253	d_deltat_vdf, d_deltaq_vdf, & ! due to vertical diffusion
	254	d_deltat_the, d_deltaq_the, & ! due to thermals
	255	d_deltat_ajs_cv, d_deltaq_ajs_cv, & ! due to dry adjustment of (w) before convection
	256	! tendencies of wake fractional area and wake number per unit area:
[3208]	257	d_s_wk, d_dens_a_wk, d_dens_wk, & ! due to wakes
	258	!!! d_s_vdf, d_dens_a_vdf, d_dens_vdf, & ! due to vertical diffusion
	259	!!! d_s_the, d_dens_a_the, d_dens_the, & ! due to thermals
[2635]	260	!
[3148]	261	ptconv, ratqsc, &
[2824]	262	wbeff, convoccur, zmax_th, &
[2606]	263	sens, flwp, fiwp, &
[3080]	264	alp_bl_conv,alp_bl_det, &
[2606]	265	alp_bl_fluct_m,alp_bl_fluct_tke, &
	266	alp_bl_stat, n2, s2, &
	267	proba_notrig, random_notrig, &
[3956]	268	!! cv_gen, & !moved to phys_state_var_mod
[2606]	269	!
[3134]	270	dnwd0, &
	271	omega, &
[2606]	272	epmax_diag, &
[3134]	273	! Deep convective variables used in phytrac
	274	pmflxr, pmflxs, &
[3496]	275	wdtrainA, wdtrainS, wdtrainM, &
[3134]	276	upwd, dnwd, &
[2606]	277	ep, &
[3134]	278	da, mp, &
	279	phi, &
	280	wght_cvfd, &
	281	phi2, &
	282	d1a, dam, &
	283	ev, &
	284	elij, &
[3496]	285	qtaa, &
[3134]	286	clw, &
	287	epmlmMm, eplaMm, &
	288	sij, &
[3387]	289	!
[4380]	290	rneblsvol, &
	291	zqsatl, zqsats, &
	292	qclr, qcld, qss, qvc, rnebclr, rnebss, gamma_ss, &
	293	Tcontr, qcontr, qcontr2, fcontrN, fcontrP, &
[2606]	294	cldemi, &
	295	cldfra, cldtau, fiwc, &
	296	fl, re, flwc, &
	297	ref_liq, ref_ice, theta, &
	298	ref_liq_pi, ref_ice_pi, &
[3780]	299	zphi, zx_rh, zx_rhl, zx_rhi, &
[2606]	300	pmfd, pmfu, &
	301	!
	302	t2m, fluxlat, &
	303	fsollw, evap_pot, &
	304	fsolsw, wfbils, wfbilo, &
[2670]	305	wfevap, wfrain, wfsnow, &
[3134]	306	prfl, psfl, fraca, Vprecip, &
[2606]	307	zw2, &
[3387]	308	!
[2606]	309	fluxu, fluxv, &
	310	fluxt, &
[3387]	311	!
[2606]	312	uwriteSTD, vwriteSTD, & !pour calcul_STDlev.h
	313	wwriteSTD, phiwriteSTD, & !pour calcul_STDlev.h
	314	qwriteSTD, twriteSTD, rhwriteSTD, & !pour calcul_STDlev.h
[3387]	315	!
[2606]	316	beta_prec, &
	317	rneb, &
[2968]	318	zxsnow,snowhgt,qsnow,to_ice,sissnow,runoff,albsol3_lic
[2606]	319	!
[2630]	320
[3387]	321	IMPLICIT NONE
[2469]	322	!>======================================================================
	323	!!
	324	!! Auteur(s) Z.X. Li (LMD/CNRS) date: 19930818
	325	!!
	326	!! Objet: Moniteur general de la physique du modele
	327	!!AA Modifications quant aux traceurs :
	328	!!AA - uniformisation des parametrisations ds phytrac
	329	!!AA - stockage des moyennes des champs necessaires
	330	!!AA en mode traceur off-line
	331	!!======================================================================
	332	!! CLEFS CPP POUR LES IO
	333	!! =====================
[1352]	334	#define histNMC
[2469]	335	!!======================================================================
	336	!! modif ( P. Le Van , 12/10/98 )
	337	!!
	338	!! Arguments:
	339	!!
	340	!! nlon----input-I-nombre de points horizontaux
	341	!! nlev----input-I-nombre de couches verticales, doit etre egale a klev
	342	!! debut---input-L-variable logique indiquant le premier passage
	343	!! lafin---input-L-variable logique indiquant le dernier passage
	344	!! jD_cur -R-jour courant a l'appel de la physique (jour julien)
	345	!! jH_cur -R-heure courante a l'appel de la physique (jour julien)
	346	!! pdtphys-input-R-pas d'integration pour la physique (seconde)
	347	!! paprs---input-R-pression pour chaque inter-couche (en Pa)
	348	!! pplay---input-R-pression pour le mileu de chaque couche (en Pa)
	349	!! pphi----input-R-geopotentiel de chaque couche (g z) (reference sol)
	350	!! pphis---input-R-geopotentiel du sol
	351	!! presnivs-input_R_pressions approximat. des milieux couches ( en PA)
	352	!! u-------input-R-vitesse dans la direction X (de O a E) en m/s
	353	!! v-------input-R-vitesse Y (de S a N) en m/s
	354	!! t-------input-R-temperature (K)
	355	!! qx------input-R-humidite specifique (kg/kg) et d'autres traceurs
	356	!! d_t_dyn-input-R-tendance dynamique pour "t" (K/s)
	357	!! d_q_dyn-input-R-tendance dynamique pour "q" (kg/kg/s)
[2496]	358	!! d_ql_dyn-input-R-tendance dynamique pour "ql" (kg/kg/s)
	359	!! d_qs_dyn-input-R-tendance dynamique pour "qs" (kg/kg/s)
[2469]	360	!! flxmass_w -input-R- flux de masse verticale
	361	!! d_u-----output-R-tendance physique de "u" (m/s/s)
	362	!! d_v-----output-R-tendance physique de "v" (m/s/s)
	363	!! d_t-----output-R-tendance physique de "t" (K/s)
	364	!! d_qx----output-R-tendance physique de "qx" (kg/kg/s)
	365	!! d_ps----output-R-tendance physique de la pression au sol
	366	!!======================================================================
	367	integer jjmp1
	368	! parameter (jjmp1=jjm+1-1/jjm) ! => (jjmp1=nbp_lat-1/(nbp_lat-1))
	369	! integer iip1
	370	! parameter (iip1=iim+1)
[782]	371
[2469]	372	include "regdim.h"
	373	include "dimsoil.h"
	374	include "clesphys.h"
[4089]	375	include "alpale.h"
[3011]	376	include "dimpft.h"
[2469]	377	!======================================================================
[3479]	378	LOGICAL, SAVE :: ok_volcan ! pour activer les diagnostics volcaniques
[3600]	379	!$OMP THREADPRIVATE(ok_volcan)
[4056]	380	INTEGER, SAVE :: flag_volc_surfstrat ! pour imposer le cool/heat rate à la surf/strato
[3989]	381	!$OMP THREADPRIVATE(flag_volc_surfstrat)
[2469]	382	LOGICAL ok_cvl ! pour activer le nouveau driver pour convection KE
	383	PARAMETER (ok_cvl=.TRUE.)
	384	LOGICAL ok_gust ! pour activer l'effet des gust sur flux surface
	385	PARAMETER (ok_gust=.FALSE.)
[3600]	386	INTEGER, SAVE :: iflag_radia ! active ou non le rayonnement (MPL)
[2469]	387	!$OMP THREADPRIVATE(iflag_radia)
	388	!======================================================================
	389	LOGICAL check ! Verifier la conservation du modele en eau
	390	PARAMETER (check=.FALSE.)
	391	LOGICAL ok_stratus ! Ajouter artificiellement les stratus
	392	PARAMETER (ok_stratus=.FALSE.)
	393	!======================================================================
	394	REAL amn, amx
	395	INTEGER igout
	396	!======================================================================
[3317]	397	! Clef iflag_cycle_diurne controlant l'activation du cycle diurne:
[2469]	398	! en attente du codage des cles par Fred
[3317]	399	! iflag_cycle_diurne est initialise par conf_phys et se trouve
	400	! dans clesphys.h (IM)
[2469]	401	!======================================================================
	402	! Modele thermique du sol, a activer pour le cycle diurne:
	403	!cc LOGICAL soil_model
	404	!cc PARAMETER (soil_model=.FALSE.)
	405	!======================================================================
	406	! Dans les versions precedentes, l'eau liquide nuageuse utilisee dans
	407	! le calcul du rayonnement est celle apres la precipitation des nuages.
	408	! Si cette cle new_oliq est activee, ce sera une valeur moyenne entre
	409	! la condensation et la precipitation. Cette cle augmente les impacts
	410	! radiatifs des nuages.
	411	!cc LOGICAL new_oliq
	412	!cc PARAMETER (new_oliq=.FALSE.)
	413	!======================================================================
	414	! Clefs controlant deux parametrisations de l'orographie:
	415	!c LOGICAL ok_orodr
	416	!cc PARAMETER (ok_orodr=.FALSE.)
	417	!cc LOGICAL ok_orolf
	418	!cc PARAMETER (ok_orolf=.FALSE.)
	419	!======================================================================
	420	LOGICAL ok_journe ! sortir le fichier journalier
[3461]	421	SAVE ok_journe
[2469]	422	!$OMP THREADPRIVATE(ok_journe)
	423	!
	424	LOGICAL ok_mensuel ! sortir le fichier mensuel
[3461]	425	SAVE ok_mensuel
[2469]	426	!$OMP THREADPRIVATE(ok_mensuel)
	427	!
	428	LOGICAL ok_instan ! sortir le fichier instantane
[3461]	429	SAVE ok_instan
[2469]	430	!$OMP THREADPRIVATE(ok_instan)
	431	!
	432	LOGICAL ok_LES ! sortir le fichier LES
[3461]	433	SAVE ok_LES
[2469]	434	!$OMP THREADPRIVATE(ok_LES)
	435	!
	436	LOGICAL callstats ! sortir le fichier stats
[3461]	437	SAVE callstats
[2469]	438	!$OMP THREADPRIVATE(callstats)
	439	!
	440	LOGICAL ok_region ! sortir le fichier regional
	441	PARAMETER (ok_region=.FALSE.)
	442	!======================================================================
[3461]	443	REAL seuil_inversion
	444	SAVE seuil_inversion
[2469]	445	!$OMP THREADPRIVATE(seuil_inversion)
[3461]	446	INTEGER iflag_ratqs
	447	SAVE iflag_ratqs
[2469]	448	!$OMP THREADPRIVATE(iflag_ratqs)
	449	real facteur
[1507]	450
[2469]	451	REAL wmax_th(klon)
	452	REAL tau_overturning_th(klon)
[878]	453
[3461]	454	INTEGER lmax_th(klon)
	455	INTEGER limbas(klon)
	456	REAL ratqscth(klon,klev)
	457	REAL ratqsdiff(klon,klev)
	458	REAL zqsatth(klon,klev)
[878]	459
[2469]	460	!======================================================================
	461	!
[4143]	462	! indices de traceurs eau vapeur, liquide, glace, fraction nuageuse LS (optional)
	463	INTEGER,SAVE :: ivap, iliq, isol, irneb
	464	!$OMP THREADPRIVATE(ivap, iliq, isol, irneb)
[2469]	465	!
	466	!
	467	! Variables argument:
	468	!
	469	INTEGER nlon
	470	INTEGER nlev
	471	REAL,INTENT(IN) :: pdtphys_
	472	! NB: pdtphys to be used in physics is in time_phylmdz_mod
	473	LOGICAL debut, lafin
	474	REAL paprs(klon,klev+1)
	475	REAL pplay(klon,klev)
	476	REAL pphi(klon,klev)
	477	REAL pphis(klon)
	478	REAL presnivs(klev)
[2799]	479	!JLD REAL znivsig(klev)
	480	!JLD real pir
[719]	481
[2469]	482	REAL u(klon,klev)
	483	REAL v(klon,klev)
[2333]	484
[2469]	485	REAL, intent(in):: rot(klon, klev)
	486	! relative vorticity, in s-1, needed for frontal waves
[2333]	487
[2469]	488	REAL t(klon,klev),thetal(klon,klev)
	489	! thetal: ligne suivante a decommenter si vous avez les fichiers
	490	! MPL 20130625
	491	! fth_fonctions.F90 et parkind1.F90
	492	! sinon thetal=theta
	493	! REAL fth_thetae,fth_thetav,fth_thetal
	494	REAL qx(klon,klev,nqtot)
	495	REAL flxmass_w(klon,klev)
	496	REAL d_u(klon,klev)
	497	REAL d_v(klon,klev)
	498	REAL d_t(klon,klev)
	499	REAL d_qx(klon,klev,nqtot)
	500	REAL d_ps(klon)
[2897]	501	! variables pour tend_to_tke
	502	REAL duadd(klon,klev)
	503	REAL dvadd(klon,klev)
	504	REAL dtadd(klon,klev)
	505
[2271]	506	#ifndef CPP_XIOS
[2997]	507	REAL, SAVE :: missing_val=nf90_fill_real
[2271]	508	#endif
[3134]	509	!! Variables moved to phys_local_var_mod
	510	!! ! Variables pour le transport convectif
	511	!! real da(klon,klev),phi(klon,klev,klev),mp(klon,klev)
	512	!! real wght_cvfd(klon,klev)
	513	!! ! Variables pour le lessivage convectif
	514	!! ! RomP >>>
	515	!! real phi2(klon,klev,klev)
	516	!! real d1a(klon,klev),dam(klon,klev)
	517	!! real ev(klon,klev)
	518	!! real clw(klon,klev),elij(klon,klev,klev)
	519	!! real epmlmMm(klon,klev,klev),eplaMm(klon,klev)
	520	!! ! RomP <<<
[2469]	521	!IM definition dynamique o_trac dans phys_output_open
	522	! type(ctrl_out) :: o_trac(nqtot)
[524]	523
[2469]	524	! variables a une pression donnee
	525	!
	526	include "declare_STDlev.h"
	527	!
	528	!
	529	include "radopt.h"
	530	!
	531	!
	532	INTEGER n
	533	!ym INTEGER npoints
	534	!ym PARAMETER(npoints=klon)
	535	!
	536	INTEGER nregISCtot
	537	PARAMETER(nregISCtot=1)
	538	!
	539	! imin_debut, nbpti, jmin_debut, nbptj : parametres pour sorties
	540	! sur 1 region rectangulaire y compris pour 1 point
	541	! imin_debut : indice minimum de i; nbpti : nombre de points en
	542	! direction i (longitude)
	543	! jmin_debut : indice minimum de j; nbptj : nombre de points en
	544	! direction j (latitude)
[2799]	545	!JLD INTEGER imin_debut, nbpti
	546	!JLD INTEGER jmin_debut, nbptj
[2469]	547	!IM: region='3d' <==> sorties en global
	548	CHARACTER*3 region
	549	PARAMETER(region='3d')
[3461]	550	LOGICAL ok_hf
[2469]	551	!
[3461]	552	SAVE ok_hf
[2469]	553	!$OMP THREADPRIVATE(ok_hf)
[524]	554
[3461]	555	INTEGER, PARAMETER :: longcles=20
	556	REAL, SAVE :: clesphy0(longcles)
[2469]	557	!$OMP THREADPRIVATE(clesphy0)
	558	!
	559	! Variables propres a la physique
[3461]	560	INTEGER, SAVE :: itap ! compteur pour la physique
[2469]	561	!$OMP THREADPRIVATE(itap)
[2235]	562
[2469]	563	INTEGER, SAVE :: abortphy=0 ! Reprere si on doit arreter en fin de phys
	564	!$OMP THREADPRIVATE(abortphy)
	565	!
[3461]	566	REAL,SAVE :: solarlong0
[2469]	567	!$OMP THREADPRIVATE(solarlong0)
[987]	568
[2469]	569	!
	570	! Parametres de l'Orographie a l'Echelle Sous-Maille (OESM):
	571	!
	572	!IM 141004 REAL zulow(klon),zvlow(klon),zustr(klon), zvstr(klon)
	573	REAL zulow(klon),zvlow(klon)
	574	!
	575	INTEGER igwd,idx(klon),itest(klon)
	576	!
	577	! REAL,allocatable,save :: run_off_lic_0(:)
	578	! !$OMP THREADPRIVATE(run_off_lic_0)
	579	!ym SAVE run_off_lic_0
	580	!KE43
	581	! Variables liees a la convection de K. Emanuel (sb):
	582	!
[3461]	583	REAL, SAVE :: bas, top ! cloud base and top levels
[2469]	584	!$OMP THREADPRIVATE(bas, top)
	585	!------------------------------------------------------------------
	586	! Upmost level reached by deep convection and related variable (jyg)
	587	!
[4367]	588	! INTEGER izero
[2469]	589	INTEGER k_upper_cv
	590	!------------------------------------------------------------------
[3153]	591	! Compteur de l'occurence de cvpas=1
	592	INTEGER Ncvpaseq1
	593	SAVE Ncvpaseq1
	594	!$OMP THREADPRIVATE(Ncvpaseq1)
[2469]	595	!
	596	!==========================================================================
	597	!CR04.12.07: on ajoute les nouvelles variables du nouveau schema
	598	!de convection avec poches froides
	599	! Variables li\'ees \`a la poche froide (jyg)
[879]	600
[3496]	601	!! REAL mipsh(klon,klev) ! mass flux shed by the adiab ascent at each level
	602	!! Moved to phys_state_var_mod
[2469]	603	!
	604	REAL wape_prescr, fip_prescr
	605	INTEGER it_wape_prescr
	606	SAVE wape_prescr, fip_prescr, it_wape_prescr
	607	!$OMP THREADPRIVATE(wape_prescr, fip_prescr, it_wape_prescr)
	608	!
	609	! variables supplementaires de concvl
	610	REAL Tconv(klon,klev)
[3134]	611	!! variable moved to phys_local_var_mod
	612	!! REAL sij(klon,klev,klev)
[2812]	613	!! !
	614	!! ! variables pour tester la conservation de l'energie dans concvl
	615	!! REAL, DIMENSION(klon,klev) :: d_t_con_sat
	616	!! REAL, DIMENSION(klon,klev) :: d_q_con_sat
	617	!! REAL, DIMENSION(klon,klev) :: dql_sat
[970]	618
[3461]	619	REAL, SAVE :: alp_bl_prescr=0.
	620	REAL, SAVE :: ale_bl_prescr=0.
	621	REAL, SAVE :: wake_s_min_lsp=0.1
[2469]	622	!$OMP THREADPRIVATE(alp_bl_prescr,ale_bl_prescr)
	623	!$OMP THREADPRIVATE(wake_s_min_lsp)
[970]	624
[3461]	625	REAL ok_wk_lsp(klon)
[1516]	626
[2469]	627	!RC
	628	! Variables li\'ees \`a la poche froide (jyg et rr)
[879]	629
[2635]	630	INTEGER, SAVE :: iflag_wake_tend ! wake: if =0, then wake state variables are
	631	! updated within calwake
	632	!$OMP THREADPRIVATE(iflag_wake_tend)
[3000]	633	INTEGER, SAVE :: iflag_alp_wk_cond=0 ! wake: if =0, then Alp_wk is the average lifting
	634	! power provided by the wakes; else, Alp_wk is the
	635	! lifting power conditionned on the presence of a
	636	! gust-front in the grid cell.
	637	!$OMP THREADPRIVATE(iflag_alp_wk_cond)
[3489]	638
[2635]	639	REAL t_w(klon,klev),q_w(klon,klev) ! temperature and moisture profiles in the wake region
	640	REAL t_x(klon,klev),q_x(klon,klev) ! temperature and moisture profiles in the off-wake region
[879]	641
[2469]	642	REAL wake_dth(klon,klev) ! wake : temp pot difference
[879]	643
[2469]	644	REAL wake_omgbdth(klon,klev) ! Wake : flux of Delta_Theta
	645	! transported by LS omega
	646	REAL wake_dp_omgb(klon,klev) ! Wake : vertical gradient of
	647	! large scale omega
	648	REAL wake_dtKE(klon,klev) ! Wake : differential heating
	649	! (wake - unpertubed) CONV
	650	REAL wake_dqKE(klon,klev) ! Wake : differential moistening
	651	! (wake - unpertubed) CONV
	652	REAL wake_dp_deltomg(klon,klev) ! Wake : gradient vertical de wake_omg
	653	REAL wake_spread(klon,klev) ! spreading term in wake_delt
	654	!
	655	!pourquoi y'a pas de save??
	656	!
[2730]	657	!!! INTEGER, SAVE, DIMENSION(klon) :: wake_k
	658	!!! !$OMP THREADPRIVATE(wake_k)
[2469]	659	!
	660	!jyg<
	661	!cc REAL wake_pe(klon) ! Wake potential energy - WAPE
	662	!>jyg
[879]	663
[3000]	664	REAL wake_fip_0(klon) ! Average Front Incoming Power (unconditionned)
[2469]	665	REAL wake_gfl(klon) ! Gust Front Length
[2635]	666	!!! REAL wake_dens(klon) ! moved to phys_state_var_mod
[2469]	667	!
	668	!
	669	REAL dt_dwn(klon,klev)
	670	REAL dq_dwn(klon,klev)
	671	REAL M_dwn(klon,klev)
	672	REAL M_up(klon,klev)
	673	REAL dt_a(klon,klev)
	674	REAL dq_a(klon,klev)
	675	REAL d_t_adjwk(klon,klev) !jyg
	676	REAL d_q_adjwk(klon,klev) !jyg
	677	LOGICAL,SAVE :: ok_adjwk=.FALSE.
	678	!$OMP THREADPRIVATE(ok_adjwk)
[2882]	679	INTEGER,SAVE :: iflag_adjwk=0 !jyg
	680	!$OMP THREADPRIVATE(iflag_adjwk) !jyg
[2657]	681	REAL,SAVE :: oliqmax=999.,oicemax=999.
	682	!$OMP THREADPRIVATE(oliqmax,oicemax)
[2469]	683	REAL, SAVE :: alp_offset
	684	!$OMP THREADPRIVATE(alp_offset)
[3150]	685	REAL, SAVE :: dtcon_multistep_max=1.e6
	686	!$OMP THREADPRIVATE(dtcon_multistep_max)
	687	REAL, SAVE :: dqcon_multistep_max=1.e6
	688	!$OMP THREADPRIVATE(dqcon_multistep_max)
	689
[2897]	690
[2469]	691	!
	692	!RR:fin declarations poches froides
	693	!==========================================================================
[1032]	694
[2469]	695	REAL ztv(klon,klev),ztva(klon,klev)
	696	REAL zpspsk(klon,klev)
	697	REAL ztla(klon,klev),zqla(klon,klev)
	698	REAL zthl(klon,klev)
[1638]	699
[2469]	700	!cc nrlmd le 10/04/2012
[1638]	701
[2469]	702	!--------Stochastic Boundary Layer Triggering: ALE_BL--------
	703	!---Propri\'et\'es du thermiques au LCL
	704	real zlcl_th(klon) ! Altitude du LCL calcul\'e
	705	! continument (pcon dans
	706	! thermcell_main.F90)
	707	real fraca0(klon) ! Fraction des thermiques au LCL
	708	real w0(klon) ! Vitesse des thermiques au LCL
	709	real w_conv(klon) ! Vitesse verticale de grande \'echelle au LCL
	710	real tke0(klon,klev+1) ! TKE au d\'ebut du pas de temps
	711	real therm_tke_max0(klon) ! TKE dans les thermiques au LCL
	712	real env_tke_max0(klon) ! TKE dans l'environnement au LCL
[1638]	713
[2799]	714	!JLD !---D\'eclenchement stochastique
	715	!JLD integer :: tau_trig(klon)
[1638]	716
[2469]	717	REAL,SAVE :: random_notrig_max=1.
	718	!$OMP THREADPRIVATE(random_notrig_max)
[2294]	719
[2469]	720	!--------Statistical Boundary Layer Closure: ALP_BL--------
	721	!---Profils de TKE dans et hors du thermique
	722	real therm_tke_max(klon,klev) ! Profil de TKE dans les thermiques
	723	real env_tke_max(klon,klev) ! Profil de TKE dans l'environnement
[1638]	724
[2897]	725	!-------Activer les tendances de TKE due a l'orograp??ie---------
	726	INTEGER, SAVE :: addtkeoro
	727	!$OMP THREADPRIVATE(addtkeoro)
	728	REAL, SAVE :: alphatkeoro
	729	!$OMP THREADPRIVATE(alphatkeoro)
	730	LOGICAL, SAVE :: smallscales_tkeoro
	731	!$OMP THREADPRIVATE(smallscales_tkeoro)
[1638]	732
[2897]	733
	734
[2469]	735	!cc fin nrlmd le 10/04/2012
[782]	736
[2469]	737	! Variables locales pour la couche limite (al1):
	738	!
	739	!Al1 REAL pblh(klon) ! Hauteur de couche limite
	740	!Al1 SAVE pblh
	741	!34EK
	742	!
	743	! Variables locales:
	744	!
	745	!AA
	746	!AA Pour phytrac
	747	REAL u1(klon) ! vents dans la premiere couche U
	748	REAL v1(klon) ! vents dans la premiere couche V
[524]	749
[2469]	750	!@$$ LOGICAL offline ! Controle du stockage ds "physique"
	751	!@$$ PARAMETER (offline=.false.)
	752	!@$$ INTEGER physid
	753	REAL frac_impa(klon,klev) ! fractions d'aerosols lessivees (impaction)
	754	REAL frac_nucl(klon,klev) ! idem (nucleation)
	755	! RomP >>>
	756	REAL beta_prec_fisrt(klon,klev) ! taux de conv de l'eau cond (fisrt)
	757	! RomP <<<
[2068]	758
[2469]	759	!IM cf FH pour Tiedtke 080604
	760	REAL rain_tiedtke(klon),snow_tiedtke(klon)
	761	!
	762	!IM 050204 END
	763	REAL devap(klon) ! evaporation et sa derivee
	764	REAL dsens(klon) ! chaleur sensible et sa derivee
[1279]	765
[2469]	766	!
	767	! Conditions aux limites
	768	!
	769	!
	770	REAL :: day_since_equinox
	771	! Date de l'equinoxe de printemps
	772	INTEGER, parameter :: mth_eq=3, day_eq=21
	773	REAL :: jD_eq
[1279]	774
[3461]	775	LOGICAL, parameter :: new_orbit = .TRUE.
[524]	776
[2469]	777	!
	778	INTEGER lmt_pas
	779	SAVE lmt_pas ! frequence de mise a jour
	780	!$OMP THREADPRIVATE(lmt_pas)
	781	real zmasse(klon, nbp_lev),exner(klon, nbp_lev)
	782	! (column-density of mass of air in a cell, in kg m-2)
	783	real, parameter:: dobson_u = 2.1415e-05 ! Dobson unit, in kg m-2
[1797]	784
[2469]	785	!IM sorties
	786	REAL un_jour
	787	PARAMETER(un_jour=86400.)
	788	INTEGER itapm1 !pas de temps de la physique du(es) mois precedents
	789	SAVE itapm1 !mis a jour le dernier pas de temps du mois en cours
	790	!$OMP THREADPRIVATE(itapm1)
	791	!======================================================================
	792	!
	793	! Declaration des procedures appelees
	794	!
	795	EXTERNAL angle ! calculer angle zenithal du soleil
	796	EXTERNAL alboc ! calculer l'albedo sur ocean
	797	EXTERNAL ajsec ! ajustement sec
	798	EXTERNAL conlmd ! convection (schema LMD)
	799	!KE43
	800	EXTERNAL conema3 ! convect4.3
	801	EXTERNAL fisrtilp ! schema de condensation a grande echelle (pluie)
	802	!AA
	803	! JBM (3/14) fisrtilp_tr not loaded
	804	! EXTERNAL fisrtilp_tr ! schema de condensation a grande echelle (pluie)
	805	! ! stockage des coefficients necessaires au
	806	! ! lessivage OFF-LINE et ON-LINE
	807	EXTERNAL hgardfou ! verifier les temperatures
	808	EXTERNAL nuage ! calculer les proprietes radiatives
	809	!C EXTERNAL o3cm ! initialiser l'ozone
	810	EXTERNAL orbite ! calculer l'orbite terrestre
	811	EXTERNAL phyredem ! ecrire l'etat de redemarrage de la physique
	812	EXTERNAL suphel ! initialiser certaines constantes
	813	EXTERNAL transp ! transport total de l'eau et de l'energie
	814	!IM
	815	EXTERNAL haut2bas !variables de haut en bas
	816	EXTERNAL ini_undefSTD !initialise a 0 une variable a 1 niveau de pression
	817	EXTERNAL undefSTD !somme les valeurs definies d'1 var a 1 niveau de pression
	818	! EXTERNAL moy_undefSTD !moyenne d'1 var a 1 niveau de pression
	819	! EXTERNAL moyglo_aire
	820	! moyenne globale d'1 var ponderee par l'aire de la maille (moyglo_pondaire)
	821	! par la masse/airetot (moyglo_pondaima) et la vraie masse (moyglo_pondmass)
	822	!
	823	!
	824	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	825	! Local variables
	826	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	827	!
	828	REAL rhcl(klon,klev) ! humiditi relative ciel clair
	829	REAL dialiq(klon,klev) ! eau liquide nuageuse
	830	REAL diafra(klon,klev) ! fraction nuageuse
[4412]	831	REAL radocond(klon,klev) ! eau condensee nuageuse
[2469]	832	!
	833	!XXX PB
	834	REAL fluxq(klon,klev, nbsrf) ! flux turbulent d'humidite
	835	!
	836	REAL zxfluxt(klon, klev)
	837	REAL zxfluxq(klon, klev)
	838	REAL zxfluxu(klon, klev)
	839	REAL zxfluxv(klon, klev)
[1797]	840
[2469]	841	! Le rayonnement n'est pas calcule tous les pas, il faut donc
	842	! sauvegarder les sorties du rayonnement
	843	!ym SAVE heat,cool,albpla,topsw,toplw,solsw,sollw,sollwdown
	844	!ym SAVE sollwdownclr, toplwdown, toplwdownclr
	845	!ym SAVE topsw0,toplw0,solsw0,sollw0, heat0, cool0
	846	!
	847	INTEGER itaprad
	848	SAVE itaprad
	849	!$OMP THREADPRIVATE(itaprad)
	850	!
	851	REAL conv_q(klon,klev) ! convergence de l'humidite (kg/kg/s)
	852	REAL conv_t(klon,klev) ! convergence de la temperature(K/s)
	853	!
	854	REAL zsav_tsol(klon)
	855	!
	856	REAL dist, rmu0(klon), fract(klon)
	857	REAL zrmu0(klon), zfract(klon)
	858	REAL zdtime, zdtime1, zdtime2, zlongi
	859	!
	860	REAL qcheck
	861	REAL z_avant(klon), z_apres(klon), z_factor(klon)
	862	LOGICAL zx_ajustq
	863	!
[2799]	864	REAL za
	865	REAL zx_t, zx_qs, zdelta, zcor
[2469]	866	real zqsat(klon,klev)
	867	!
[4367]	868	INTEGER i, k, iq, nsrf, l, itr
[2469]	869	!
	870	REAL t_coup
	871	PARAMETER (t_coup=234.0)
[1797]	872
[2469]	873	!ym A voir plus tard !!
	874	!ym REAL zx_relief(iim,jjmp1)
	875	!ym REAL zx_aire(iim,jjmp1)
	876	!
	877	! Grandeurs de sorties
	878	REAL s_capCL(klon)
	879	REAL s_oliqCL(klon), s_cteiCL(klon)
	880	REAL s_trmb1(klon), s_trmb2(klon)
	881	REAL s_trmb3(klon)
[2707]	882
	883	! La convection n'est pas calculee tous les pas, il faut donc
	884	! sauvegarder les sorties de la convection
	885	!ym SAVE
	886	!ym SAVE
	887	!ym SAVE
	888	!
[2730]	889	INTEGER itapcv, itapwk
	890	SAVE itapcv, itapwk
	891	!$OMP THREADPRIVATE(itapcv, itapwk)
[2707]	892
[2469]	893	!KE43
	894	! Variables locales pour la convection de K. Emanuel (sb):
[524]	895
[2469]	896	REAL tvp(klon,klev) ! virtual temp of lifted parcel
	897	CHARACTER*40 capemaxcels !max(CAPE)
[1412]	898
[2469]	899	REAL rflag(klon) ! flag fonctionnement de convect
	900	INTEGER iflagctrl(klon) ! flag fonctionnement de convect
[904]	901
[2469]	902	! -- convect43:
	903	INTEGER ntra ! nb traceurs pour convect4.3
	904	REAL dtvpdt1(klon,klev), dtvpdq1(klon,klev)
	905	REAL dplcldt(klon), dplcldr(klon)
	906	!? . condm_con(klon,klev),conda_con(klon,klev),
	907	!? . mr_con(klon,klev),ep_con(klon,klev)
	908	!? . ,sadiab(klon,klev),wadiab(klon,klev)
	909	! --
	910	!34EK
	911	!
	912	! Variables du changement
	913	!
	914	! con: convection
	915	! lsc: condensation a grande echelle (Large-Scale-Condensation)
	916	! ajs: ajustement sec
	917	! eva: evaporation de l'eau liquide nuageuse
	918	! vdf: couche limite (Vertical DiFfusion)
[2611]	919	!
[2469]	920	! tendance nulles
[2812]	921	REAL, dimension(klon,klev):: du0, dv0, dt0, dq0, dql0, dqi0
	922	REAL, dimension(klon) :: dsig0, ddens0
	923	INTEGER, dimension(klon) :: wkoccur1
[2801]	924	! tendance buffer pour appel de add_phys_tend
	925	REAL, DIMENSION(klon,klev) :: d_q_ch4_dtime
[2611]	926	!
	927	! Flag pour pouvoir ne pas ajouter les tendances.
	928	! Par defaut, les tendances doivente etre ajoutees et
	929	! flag_inhib_tend = 0
	930	! flag_inhib_tend > 0 : tendances non ajoutees, avec un nombre
	931	! croissant de print quand la valeur du flag augmente
	932	!!! attention, ce flag doit etre change avec prudence !!!
	933	INTEGER :: flag_inhib_tend = 0 ! 0 is the default value
	934	!! INTEGER :: flag_inhib_tend = 2
[3134]	935	!
	936	! Logical switch to a bug : reseting to 0 convective variables at the
	937	! begining of physiq.
	938	LOGICAL, SAVE :: ok_bug_cv_trac = .TRUE.
	939	!$OMP THREADPRIVATE(ok_bug_cv_trac)
[3180]	940	!
	941	! Logical switch to a bug : changing wake_deltat when thermals are active
	942	! even when there are no wakes.
	943	LOGICAL, SAVE :: ok_bug_split_th = .TRUE.
	944	!$OMP THREADPRIVATE(ok_bug_split_th)
[524]	945
[2469]	946	!
	947	!********************************************************
	948	! declarations
[524]	949
[2469]	950	!********************************************************
	951	!IM 081204 END
	952	!
	953	REAL pen_u(klon,klev), pen_d(klon,klev)
	954	REAL pde_u(klon,klev), pde_d(klon,klev)
	955	INTEGER kcbot(klon), kctop(klon), kdtop(klon)
	956	!
[3461]	957	REAL ratqsbas,ratqshaut,tau_ratqs
	958	SAVE ratqsbas,ratqshaut,tau_ratqs
[2469]	959	!$OMP THREADPRIVATE(ratqsbas,ratqshaut,tau_ratqs)
[2534]	960	REAL, SAVE :: ratqsp0=50000., ratqsdp=20000.
	961	!$OMP THREADPRIVATE(ratqsp0, ratqsdp)
[644]	962
[2469]	963	! Parametres lies au nouveau schema de nuages (SB, PDF)
[3461]	964	REAL, SAVE :: fact_cldcon
	965	REAL, SAVE :: facttemps
	966	!$OMP THREADPRIVATE(fact_cldcon,facttemps)
	967	LOGICAL, SAVE :: ok_newmicro
[2469]	968	!$OMP THREADPRIVATE(ok_newmicro)
[524]	969
[3461]	970	INTEGER, SAVE :: iflag_cld_th
[2469]	971	!$OMP THREADPRIVATE(iflag_cld_th)
[2877]	972	!IM logical ptconv(klon,klev) !passe dans phys_local_var_mod
[2469]	973	!IM cf. AM 081204 BEG
[3461]	974	LOGICAL ptconvth(klon,klev)
[3999]	975
	976	REAL picefra(klon,klev)
[4458]	977	REAL zrel_oro(klon)
[2469]	978	!IM cf. AM 081204 END
	979	!
	980	! Variables liees a l'ecriture de la bande histoire physique
	981	!
	982	!======================================================================
	983	!
	984	!
[2799]	985	!JLD integer itau_w ! pas de temps ecriture = itap + itau_phy
[2469]	986	!
	987	!
	988	! Variables locales pour effectuer les appels en serie
	989	!
	990	!IM RH a 2m (la surface)
	991	REAL Lheat
[524]	992
[2469]	993	INTEGER length
	994	PARAMETER ( length = 100 )
	995	REAL tabcntr0( length )
	996	!
[2799]	997	!JLD INTEGER ndex2d(nbp_lon*nbp_lat)
[2469]	998	!IM
	999	!
	1000	!IM AMIP2 BEG
[2799]	1001	!JLD REAL moyglo, mountor
[2469]	1002	!IM 141004 BEG
	1003	REAL zustrdr(klon), zvstrdr(klon)
	1004	REAL zustrli(klon), zvstrli(klon)
	1005	REAL zustrph(klon), zvstrph(klon)
	1006	REAL aam, torsfc
	1007	!IM 141004 END
	1008	!IM 190504 BEG
	1009	! INTEGER imp1jmp1
	1010	! PARAMETER(imp1jmp1=(iim+1)*jjmp1)
	1011	!ym A voir plus tard
	1012	! REAL zx_tmp((nbp_lon+1)*nbp_lat)
	1013	! REAL airedyn(nbp_lon+1,nbp_lat)
	1014	!IM 190504 END
[2799]	1015	!JLD LOGICAL ok_msk
	1016	!JLD REAL msk(klon)
[2469]	1017	!ym A voir plus tard
	1018	!ym REAL zm_wo(jjmp1, klev)
	1019	!IM AMIP2 END
	1020	!
	1021	REAL zx_tmp_fi2d(klon) ! variable temporaire grille physique
	1022	REAL zx_tmp_fi3d(klon,klev) ! variable temporaire pour champs 3D
[2799]	1023	!JLD REAL zx_tmp_2d(nbp_lon,nbp_lat)
	1024	!JLD REAL zx_lon(nbp_lon,nbp_lat)
	1025	!JLD REAL zx_lat(nbp_lon,nbp_lat)
[2469]	1026	!
[2630]	1027	INTEGER nid_ctesGCM
	1028	SAVE nid_ctesGCM
	1029	!$OMP THREADPRIVATE(nid_ctesGCM)
[2469]	1030	!
	1031	!IM 280405 BEG
	1032	! INTEGER nid_bilKPins, nid_bilKPave
	1033	! SAVE nid_bilKPins, nid_bilKPave
	1034	! !$OMP THREADPRIVATE(nid_bilKPins, nid_bilKPave)
	1035	!
	1036	REAL ve_lay(klon,klev) ! transport meri. de l'energie a chaque niveau vert.
	1037	REAL vq_lay(klon,klev) ! transport meri. de l'eau a chaque niveau vert.
	1038	REAL ue_lay(klon,klev) ! transport zonal de l'energie a chaque niveau vert.
	1039	REAL uq_lay(klon,klev) ! transport zonal de l'eau a chaque niveau vert.
	1040	!
[2799]	1041	!JLD REAL zjulian
	1042	!JLD SAVE zjulian
	1043	!JLD!$OMP THREADPRIVATE(zjulian)
[2590]	1044
[2799]	1045	!JLD INTEGER nhori, nvert
	1046	!JLD REAL zsto
	1047	!JLD REAL zstophy, zout
[2068]	1048
[3981]	1049	CHARACTER (LEN=20) :: modname='physiq_mod'
[4056]	1050	CHARACTER*80 abort_message
[3461]	1051	LOGICAL, SAVE :: ok_sync, ok_sync_omp
[2469]	1052	!$OMP THREADPRIVATE(ok_sync)
[3461]	1053	REAL date0
[524]	1054
[2469]	1055	! essai writephys
[3461]	1056	INTEGER fid_day, fid_mth, fid_ins
	1057	PARAMETER (fid_ins = 1, fid_day = 2, fid_mth = 3)
	1058	INTEGER prof2d_on, prof3d_on, prof2d_av, prof3d_av
	1059	PARAMETER (prof2d_on = 1, prof3d_on = 2, prof2d_av = 3, prof3d_av = 4)
[2469]	1060	REAL ztsol(klon)
	1061	REAL q2m(klon,nbsrf) ! humidite a 2m
[524]	1062
[2469]	1063	!IM: t2m, q2m, ustar, u10m, v10m et t2mincels, t2maxcels
	1064	CHARACTER*40 t2mincels, t2maxcels !t2m min., t2m max
[2799]	1065	CHARACTER*40 tinst, tave
[2469]	1066	REAL cldtaupi(klon,klev) ! Cloud optical thickness for
	1067	! pre-industrial (pi) aerosols
[524]	1068
[2863]	1069	INTEGER :: naero
[2469]	1070	! Aerosol optical properties
	1071	CHARACTER*4, DIMENSION(naero_grp) :: rfname
	1072	REAL, DIMENSION(klon,klev) :: mass_solu_aero ! total mass
	1073	! concentration
	1074	! for all soluble
	1075	! aerosols[ug/m3]
	1076	REAL, DIMENSION(klon,klev) :: mass_solu_aero_pi
	1077	! - " - (pre-industrial value)
[1279]	1078
[2469]	1079	! Parameters
	1080	LOGICAL ok_ade, ok_aie ! Apply aerosol (in)direct effects or not
[2738]	1081	LOGICAL ok_alw ! Apply aerosol LW effect or not
[2469]	1082	LOGICAL ok_cdnc ! ok cloud droplet number concentration (O. Boucher 01-2013)
	1083	REAL bl95_b0, bl95_b1 ! Parameter in Boucher and Lohmann (1995)
[2738]	1084	SAVE ok_ade, ok_aie, ok_alw, ok_cdnc, bl95_b0, bl95_b1
	1085	!$OMP THREADPRIVATE(ok_ade, ok_aie, ok_alw, ok_cdnc, bl95_b0, bl95_b1)
[2469]	1086	LOGICAL, SAVE :: aerosol_couple ! true : calcul des aerosols dans INCA
	1087	! false : lecture des aerosol dans un fichier
	1088	!$OMP THREADPRIVATE(aerosol_couple)
[3338]	1089	LOGICAL, SAVE :: chemistry_couple ! true : use INCA chemistry O3
	1090	! false : use offline chemistry O3
	1091	!$OMP THREADPRIVATE(chemistry_couple)
[2469]	1092	INTEGER, SAVE :: flag_aerosol
	1093	!$OMP THREADPRIVATE(flag_aerosol)
[2644]	1094	LOGICAL, SAVE :: flag_bc_internal_mixture
	1095	!$OMP THREADPRIVATE(flag_bc_internal_mixture)
[2469]	1096	!
	1097	!--STRAT AEROSOL
[2530]	1098	INTEGER, SAVE :: flag_aerosol_strat
[2469]	1099	!$OMP THREADPRIVATE(flag_aerosol_strat)
[3412]	1100	!
	1101	!--INTERACTIVE AEROSOL FEEDBACK ON RADIATION
	1102	LOGICAL, SAVE :: flag_aer_feedback
	1103	!$OMP THREADPRIVATE(flag_aer_feedback)
	1104
[2469]	1105	!c-fin STRAT AEROSOL
	1106	!
	1107	! Declaration des constantes et des fonctions thermodynamiques
	1108	!
[3461]	1109	LOGICAL,SAVE :: first=.TRUE.
[2469]	1110	!$OMP THREADPRIVATE(first)
[1279]	1111
[2788]	1112	! VARIABLES RELATED TO OZONE CLIMATOLOGIES ; all are OpenMP shared
	1113	! Note that pressure vectors are in Pa and in stricly ascending order
	1114	INTEGER,SAVE :: read_climoz ! Read ozone climatology
[2469]	1115	! (let it keep the default OpenMP shared attribute)
	1116	! Allowed values are 0, 1 and 2
	1117	! 0: do not read an ozone climatology
	1118	! 1: read a single ozone climatology that will be used day and night
	1119	! 2: read two ozone climatologies, the average day and night
	1120	! climatology and the daylight climatology
[2788]	1121	INTEGER,SAVE :: ncid_climoz ! NetCDF file identifier
	1122	REAL, POINTER, SAVE :: press_cen_climoz(:) ! Pressure levels
	1123	REAL, POINTER, SAVE :: press_edg_climoz(:) ! Edges of pressure intervals
	1124	REAL, POINTER, SAVE :: time_climoz(:) ! Time vector
	1125	CHARACTER(LEN=13), PARAMETER :: vars_climoz(2) &
	1126	= ["tro3 ","tro3_daylight"]
	1127	! vars_climoz(1:read_climoz): variables names in climoz file.
[2819]	1128	! vars_climoz(1:read_climoz-2) if read_climoz>2 (temporary)
	1129	REAL :: ro3i ! 0<=ro3i<=360 ; required time index in NetCDF file for
	1130	! the ozone fields, old method.
[1279]	1131
[2469]	1132	include "YOMCST.h"
	1133	include "YOETHF.h"
	1134	include "FCTTRE.h"
	1135	!IM 100106 BEG : pouvoir sortir les ctes de la physique
	1136	include "conema3.h"
	1137	include "fisrtilp.h"
	1138	include "nuage.h"
	1139	include "compbl.h"
	1140	!IM 100106 END : pouvoir sortir les ctes de la physique
	1141	!
	1142	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1143	! Declarations pour Simulateur COSP
	1144	!============================================================
[3511]	1145	real :: mr_ozone(klon,klev), phicosp(klon,klev)
[3370]	1146
[2469]	1147	!IM stations CFMIP
	1148	INTEGER, SAVE :: nCFMIP
	1149	!$OMP THREADPRIVATE(nCFMIP)
	1150	INTEGER, PARAMETER :: npCFMIP=120
	1151	INTEGER, ALLOCATABLE, SAVE :: tabCFMIP(:)
	1152	REAL, ALLOCATABLE, SAVE :: lonCFMIP(:), latCFMIP(:)
	1153	!$OMP THREADPRIVATE(tabCFMIP, lonCFMIP, latCFMIP)
	1154	INTEGER, ALLOCATABLE, SAVE :: tabijGCM(:)
	1155	REAL, ALLOCATABLE, SAVE :: lonGCM(:), latGCM(:)
	1156	!$OMP THREADPRIVATE(tabijGCM, lonGCM, latGCM)
	1157	INTEGER, ALLOCATABLE, SAVE :: iGCM(:), jGCM(:)
	1158	!$OMP THREADPRIVATE(iGCM, jGCM)
	1159	logical, dimension(nfiles) :: phys_out_filestations
	1160	logical, parameter :: lNMC=.FALSE.
[1539]	1161
[2469]	1162	!IM betaCRF
	1163	REAL, SAVE :: pfree, beta_pbl, beta_free
	1164	!$OMP THREADPRIVATE(pfree, beta_pbl, beta_free)
	1165	REAL, SAVE :: lon1_beta, lon2_beta, lat1_beta, lat2_beta
	1166	!$OMP THREADPRIVATE(lon1_beta, lon2_beta, lat1_beta, lat2_beta)
	1167	LOGICAL, SAVE :: mskocean_beta
	1168	!$OMP THREADPRIVATE(mskocean_beta)
	1169	REAL, dimension(klon, klev) :: beta ! facteur sur cldtaurad et
	1170	! cldemirad pour evaluer les
	1171	! retros liees aux CRF
	1172	REAL, dimension(klon, klev) :: cldtaurad ! epaisseur optique
	1173	! pour radlwsw pour
	1174	! tester "CRF off"
	1175	REAL, dimension(klon, klev) :: cldtaupirad ! epaisseur optique
	1176	! pour radlwsw pour
	1177	! tester "CRF off"
	1178	REAL, dimension(klon, klev) :: cldemirad ! emissivite pour
	1179	! radlwsw pour tester
	1180	! "CRF off"
	1181	REAL, dimension(klon, klev) :: cldfrarad ! fraction nuageuse
[1735]	1182
[3418]	1183	#ifdef INCA
[4367]	1184	REAL :: calday, zxsnow_dummy(klon)
[3418]	1185	! set de variables utilisees pour l'initialisation des valeurs provenant de INCA
	1186	REAL, DIMENSION(klon,klev,naero_grp,nbands) :: init_tauinca
	1187	REAL, DIMENSION(klon,klev,naero_grp,nbands) :: init_pizinca
	1188	REAL, DIMENSION(klon,klev,naero_grp,nbands) :: init_cginca
	1189	REAL, DIMENSION(klon,klev,nbands) :: init_ccminca
	1190	#endif
	1191	REAL, DIMENSION(klon,nbtr) :: init_source
	1192
[3048]	1193	!lwoff=y : offset LW CRE for radiation code and other schemes
	1194	REAL, SAVE :: betalwoff
	1195	!OMP THREADPRIVATE(betalwoff)
	1196	!
[2469]	1197	INTEGER :: nbtr_tmp ! Number of tracer inside concvl
	1198	REAL, dimension(klon,klev) :: sh_in ! Specific humidity entering in phytrac
[2784]	1199	REAL, dimension(klon,klev) :: ch_in ! Condensed humidity entering in phytrac (eau liquide)
[2469]	1200	integer iostat
[1539]	1201
[4009]	1202	REAL, dimension(klon,klev+1) :: tke_dissip_ave, l_mix_ave, wprime_ave
[2469]	1203	REAL zzz
	1204	!albedo SB >>>
[3461]	1205	REAL,DIMENSION(6), SAVE :: SFRWL
[3435]	1206	!$OMP THREADPRIVATE(SFRWL)
[2469]	1207	!albedo SB <<<
[1955]	1208
[2485]	1209	!--OB variables for mass fixer (hard coded for now)
[3461]	1210	LOGICAL, PARAMETER :: mass_fixer=.FALSE.
	1211	REAL qql1(klon),qql2(klon),corrqql
[2476]	1212
[3110]	1213	REAL pi
	1214
	1215	pi = 4. * ATAN(1.)
	1216
[3981]	1217	! set-up call to alerte function
	1218	call_alert = (alert_first_call .AND. is_master)
	1219
[2469]	1220	! Ehouarn: set value of jjmp1 since it is no longer a "fixed parameter"
	1221	jjmp1=nbp_lat
[2344]	1222
[2469]	1223	!======================================================================
	1224	! Gestion calendrier : mise a jour du module phys_cal_mod
	1225	!
	1226	pdtphys=pdtphys_
	1227	CALL update_time(pdtphys)
[3435]	1228	phys_tstep=NINT(pdtphys)
	1229	#ifdef CPP_XIOS
[4236]	1230	! switch to XIOS LMDZ physics context
	1231	IF (.NOT. debut .AND. is_omp_master) THEN
	1232	CALL wxios_set_context()
	1233	CALL xios_update_calendar(itap+1)
	1234	ENDIF
[3435]	1235	#endif
[1355]	1236
[2469]	1237	!======================================================================
	1238	! Ecriture eventuelle d'un profil verticale en entree de la physique.
	1239	! Utilise notamment en 1D mais peut etre active egalement en 3D
	1240	! en imposant la valeur de igout.
	1241	!======================================================================d
[2692]	1242	IF (prt_level.ge.1) THEN
[2469]	1243	igout=klon/2+1/klon
	1244	write(lunout,*) 'DEBUT DE PHYSIQ !!!!!!!!!!!!!!!!!!!!'
	1245	write(lunout,*) 'igout, lat, lon ',igout, latitude_deg(igout), &
	1246	longitude_deg(igout)
	1247	write(lunout,*) &
	1248	'nlon,klev,nqtot,debut,lafin, jD_cur, jH_cur,pdtphys'
	1249	write(lunout,*) &
	1250	nlon,klev,nqtot,debut,lafin, jD_cur, jH_cur,pdtphys
[879]	1251
[2469]	1252	write(lunout,*) 'paprs, play, phi, u, v, t'
[2692]	1253	DO k=1,klev
[2469]	1254	write(lunout,*) paprs(igout,k),pplay(igout,k),pphi(igout,k), &
	1255	u(igout,k),v(igout,k),t(igout,k)
[2692]	1256	ENDDO
[2469]	1257	write(lunout,*) 'ovap (g/kg), oliq (g/kg)'
[2692]	1258	DO k=1,klev
[2469]	1259	write(lunout,) qx(igout,k,1)1000,qx(igout,k,2)*1000.
[2692]	1260	ENDDO
	1261	ENDIF
[879]	1262
[2769]	1263	! Quick check on pressure levels:
[3461]	1264	CALL assert(paprs(:, nbp_lev + 1) < paprs(:, nbp_lev), &
[2769]	1265	"physiq_mod paprs bad order")
[879]	1266
[2692]	1267	IF (first) THEN
[4143]	1268	ivap = strIdx(tracers(:)%name, addPhase('H2O', 'g'))
	1269	iliq = strIdx(tracers(:)%name, addPhase('H2O', 'l'))
	1270	isol = strIdx(tracers(:)%name, addPhase('H2O', 's'))
	1271	irneb= strIdx(tracers(:)%name, addPhase('H2O', 'r'))
[3435]	1272	CALL init_etat0_limit_unstruct
	1273	IF (.NOT. create_etat0_limit) CALL init_limit_read(days_elapsed)
[2469]	1274	!CR:nvelles variables convection/poches froides
	1275
[3461]	1276	WRITE(lunout,*) '================================================='
	1277	WRITE(lunout,*) 'Allocation des variables locales et sauvegardees'
	1278	WRITE(lunout,*) '================================================='
[2692]	1279	CALL phys_local_var_init
[2469]	1280	!
	1281	! appel a la lecture du run.def physique
[2692]	1282	CALL conf_phys(ok_journe, ok_mensuel, &
[2469]	1283	ok_instan, ok_hf, &
	1284	ok_LES, &
	1285	callstats, &
	1286	solarlong0,seuil_inversion, &
	1287	fact_cldcon, facttemps,ok_newmicro,iflag_radia, &
	1288	iflag_cld_th,iflag_ratqs,ratqsbas,ratqshaut,tau_ratqs, &
[3989]	1289	ok_ade, ok_aie, ok_alw, ok_cdnc, ok_volcan, flag_volc_surfstrat, aerosol_couple, &
	1290	chemistry_couple, flag_aerosol, flag_aerosol_strat, flag_aer_feedback, &
[2644]	1291	flag_bc_internal_mixture, bl95_b0, bl95_b1, &
[2469]	1292	! nv flags pour la convection et les
	1293	! poches froides
	1294	read_climoz, &
	1295	alp_offset)
[2692]	1296	CALL phys_state_var_init(read_climoz)
	1297	CALL phys_output_var_init
[3522]	1298	IF (read_climoz>=1 .AND. create_etat0_limit .AND. grid_type==unstructured) &
	1299	CALL regr_horiz_time_climoz(read_climoz,ok_daily_climoz)
[3435]	1300
[3522]	1301	#ifdef CPP_StratAer
	1302	CALL strataer_init
	1303	#endif
	1304
[2469]	1305	print*, '================================================='
	1306	!
	1307	!CR: check sur le nb de traceurs de l eau
[2692]	1308	IF ((iflag_ice_thermo.gt.0).and.(nqo==2)) THEN
[2469]	1309	WRITE (lunout, *) ' iflag_ice_thermo==1 requires 3 H2O tracers ', &
[4120]	1310	'(H2O_g, H2O_l, H2O_s) but nqo=', nqo, '. Might as well stop here.'
[3531]	1311	abort_message='see above'
	1312	CALL abort_physic(modname,abort_message,1)
[2692]	1313	ENDIF
[2224]	1314
[4062]	1315	IF (ok_ice_sursat.AND.(iflag_ice_thermo.EQ.0)) THEN
	1316	WRITE (lunout, *) ' ok_ice_sursat=y requires iflag_ice_thermo=1 as well'
[4059]	1317	abort_message='see above'
	1318	CALL abort_physic(modname,abort_message,1)
	1319	ENDIF
	1320
[4062]	1321	IF (ok_ice_sursat.AND.(nqo.NE.4)) THEN
	1322	WRITE (lunout, *) ' ok_ice_sursat=y requires 4 H2O tracers ', &
[4120]	1323	'(H2O_g, H2O_l, H2O_s, H2O_r) but nqo=', nqo, '. Might as well stop here.'
[4059]	1324	abort_message='see above'
	1325	CALL abort_physic(modname,abort_message,1)
	1326	ENDIF
	1327
[4062]	1328	IF (ok_plane_h2o.AND..NOT.ok_ice_sursat) THEN
	1329	WRITE (lunout, *) ' ok_plane_h2o=y requires ok_ice_sursat=y '
	1330	abort_message='see above'
	1331	CALL abort_physic(modname,abort_message,1)
	1332	ENDIF
	1333
	1334	IF (ok_plane_contrail.AND..NOT.ok_ice_sursat) THEN
	1335	WRITE (lunout, *) ' ok_plane_contrail=y requires ok_ice_sursat=y '
	1336	abort_message='see above'
	1337	CALL abort_physic(modname,abort_message,1)
	1338	ENDIF
	1339
[3154]	1340	Ncvpaseq1 = 0
[2469]	1341	dnwd0=0.0
	1342	ftd=0.0
	1343	fqd=0.0
	1344	cin=0.
	1345	!ym Attention pbase pas initialise dans concvl !!!!
	1346	pbase=0
	1347	!IM 180608
[904]	1348
[2469]	1349	itau_con=0
[3461]	1350	first=.FALSE.
[1797]	1351
[2692]	1352	ENDIF ! first
[1797]	1353
[2469]	1354	!ym => necessaire pour iflag_con != 2
	1355	pmfd(:,:) = 0.
	1356	pen_u(:,:) = 0.
	1357	pen_d(:,:) = 0.
	1358	pde_d(:,:) = 0.
	1359	pde_u(:,:) = 0.
	1360	aam=0.
	1361	d_t_adjwk(:,:)=0
	1362	d_q_adjwk(:,:)=0
[1797]	1363
[2469]	1364	alp_bl_conv(:)=0.
[2245]	1365
[2469]	1366	torsfc=0.
	1367	forall (k=1: nbp_lev) zmasse(:, k) = (paprs(:, k)-paprs(:, k+1)) / rg
[1797]	1368
[644]	1369
[2469]	1370	IF (debut) THEN
	1371	CALL suphel ! initialiser constantes et parametres phys.
[3327]	1372	! tau_gl : constante de rappel de la temperature a la surface de la glace - en
	1373	tau_gl=5.
	1374	CALL getin_p('tau_gl', tau_gl)
	1375	! tau_gl : constante de rappel de la temperature a la surface de la glace - en
	1376	! secondes
	1377	tau_gl=86400.*tau_gl
[3461]	1378	WRITE(lunout,*) 'debut physiq_mod tau_gl=',tau_gl
	1379
[3000]	1380	CALL getin_p('iflag_alp_wk_cond', iflag_alp_wk_cond)
[2469]	1381	CALL getin_p('random_notrig_max',random_notrig_max)
[2882]	1382	CALL getin_p('ok_adjwk',ok_adjwk)
	1383	IF (ok_adjwk) iflag_adjwk=2 ! for compatibility with older versions
	1384	! iflag_adjwk: ! 0 = Default: no convective adjustment of w-region
	1385	! 1 => convective adjustment but state variables are unchanged
	1386	! 2 => convective adjustment and state variables are changed
	1387	CALL getin_p('iflag_adjwk',iflag_adjwk)
[3150]	1388	CALL getin_p('dtcon_multistep_max',dtcon_multistep_max)
	1389	CALL getin_p('dqcon_multistep_max',dqcon_multistep_max)
[2613]	1390	CALL getin_p('oliqmax',oliqmax)
[2657]	1391	CALL getin_p('oicemax',oicemax)
[2534]	1392	CALL getin_p('ratqsp0',ratqsp0)
	1393	CALL getin_p('ratqsdp',ratqsdp)
[2635]	1394	iflag_wake_tend = 0
	1395	CALL getin_p('iflag_wake_tend',iflag_wake_tend)
[2799]	1396	ok_bad_ecmwf_thermo=.TRUE. ! By default thermodynamical constants are set
	1397	! in rrtm/suphec.F90 (and rvtmp2 is set to 0).
	1398	CALL getin_p('ok_bad_ecmwf_thermo',ok_bad_ecmwf_thermo)
[3134]	1399	CALL getin_p('ok_bug_cv_trac',ok_bug_cv_trac)
[3180]	1400	CALL getin_p('ok_bug_split_th',ok_bug_split_th)
[2799]	1401	fl_ebil = 0 ! by default, conservation diagnostics are desactivated
	1402	CALL getin_p('fl_ebil',fl_ebil)
	1403	fl_cor_ebil = 0 ! by default, no correction to ensure energy conservation
	1404	CALL getin_p('fl_cor_ebil',fl_cor_ebil)
[2984]	1405	iflag_phytrac = 1 ! by default we do want to call phytrac
[2973]	1406	CALL getin_p('iflag_phytrac',iflag_phytrac)
[3776]	1407	#ifdef CPP_Dust
	1408	IF (iflag_phytrac.EQ.0) THEN
	1409	WRITE(lunout,*) 'In order to run with SPLA, iflag_phytrac will be forced to 1'
	1410	iflag_phytrac = 1
	1411	ENDIF
[4056]	1412	#endif
[3011]	1413	nvm_lmdz = 13
	1414	CALL getin_p('NVM',nvm_lmdz)
[3387]	1415
[3461]	1416	WRITE(lunout,*) 'iflag_alp_wk_cond=', iflag_alp_wk_cond
	1417	WRITE(lunout,*) 'random_ntrig_max=', random_notrig_max
	1418	WRITE(lunout,*) 'ok_adjwk=', ok_adjwk
	1419	WRITE(lunout,*) 'iflag_adjwk=', iflag_adjwk
	1420	WRITE(lunout,*) 'qtcon_multistep_max=',dtcon_multistep_max
	1421	WRITE(lunout,*) 'qdcon_multistep_max=',dqcon_multistep_max
	1422	WRITE(lunout,*) 'ratqsp0=', ratqsp0
	1423	WRITE(lunout,*) 'ratqsdp=', ratqsdp
	1424	WRITE(lunout,*) 'iflag_wake_tend=', iflag_wake_tend
	1425	WRITE(lunout,*) 'ok_bad_ecmwf_thermo=',ok_bad_ecmwf_thermo
	1426	WRITE(lunout,*) 'ok_bug_cv_trac=', ok_bug_cv_trac
	1427	WRITE(lunout,*) 'ok_bug_split_th=', ok_bug_split_th
	1428	WRITE(lunout,*) 'fl_ebil=', fl_ebil
	1429	WRITE(lunout,*) 'fl_cor_ebil=', fl_cor_ebil
	1430	WRITE(lunout,*) 'iflag_phytrac=', iflag_phytrac
	1431	WRITE(lunout,*) 'NVM=', nvm_lmdz
	1432
[3387]	1433	!--PC: defining fields to be exchanged between LMDz, ORCHIDEE and NEMO
	1434	WRITE(lunout,*) 'Call to infocfields from physiq'
	1435	CALL infocfields_init
	1436
[2469]	1437	ENDIF
[878]	1438
[2692]	1439	IF (prt_level.ge.1) print *,'CONVERGENCE PHYSIQUE THERM 1 '
[1279]	1440
[2469]	1441	!======================================================================
	1442	! Gestion calendrier : mise a jour du module phys_cal_mod
	1443	!
	1444	! CALL phys_cal_update(jD_cur,jH_cur)
[1279]	1445
[2469]	1446	!
	1447	! Si c'est le debut, il faut initialiser plusieurs choses
	1448	! ********
	1449	!
	1450	IF (debut) THEN
	1451	!rv CRinitialisation de wght_th et lalim_conv pour la
	1452	!definition de la couche alimentation de la convection a partir
	1453	!des caracteristiques du thermique
	1454	wght_th(:,:)=1.
	1455	lalim_conv(:)=1
	1456	!RC
	1457	ustar(:,:)=0.
[2569]	1458	! u10m(:,:)=0.
	1459	! v10m(:,:)=0.
[2469]	1460	rain_con(:)=0.
	1461	snow_con(:)=0.
	1462	topswai(:)=0.
	1463	topswad(:)=0.
	1464	solswai(:)=0.
	1465	solswad(:)=0.
[959]	1466
[2469]	1467	wmax_th(:)=0.
	1468	tau_overturning_th(:)=0.
[645]	1469
[4389]	1470	IF (ANY(type_trac == ['inca','inco'])) THEN
[2469]	1471	! jg : initialisation jusqu'au ces variables sont dans restart
	1472	ccm(:,:,:) = 0.
	1473	tau_aero(:,:,:,:) = 0.
	1474	piz_aero(:,:,:,:) = 0.
	1475	cg_aero(:,:,:,:) = 0.
[2372]	1476
[2469]	1477	config_inca='none' ! default
	1478	CALL getin_p('config_inca',config_inca)
[2372]	1479
[2469]	1480	ELSE
	1481	config_inca='none' ! default
[2692]	1482	ENDIF
[782]	1483
[3435]	1484	tau_aero(:,:,:,:) = 1.e-15
	1485	piz_aero(:,:,:,:) = 1.
	1486	cg_aero(:,:,:,:) = 0.
	1487
[2469]	1488	IF (aerosol_couple .AND. (config_inca /= "aero" &
	1489	.AND. config_inca /= "aeNP ")) THEN
	1490	abort_message &
	1491	= 'if aerosol_couple is activated, config_inca need to be ' &
	1492	// 'aero or aeNP'
	1493	CALL abort_physic (modname,abort_message,1)
	1494	ENDIF
[2443]	1495
[2469]	1496	rnebcon0(:,:) = 0.0
	1497	clwcon0(:,:) = 0.0
	1498	rnebcon(:,:) = 0.0
	1499	clwcon(:,:) = 0.0
[1863]	1500
[2469]	1501	!
	1502	print*,'iflag_coupl,iflag_clos,iflag_wake', &
	1503	iflag_coupl,iflag_clos,iflag_wake
[3317]	1504	print*,'iflag_cycle_diurne', iflag_cycle_diurne
[2469]	1505	!
	1506	IF (iflag_con.EQ.2.AND.iflag_cld_th.GT.-1) THEN
	1507	abort_message = 'Tiedtke needs iflag_cld_th=-2 or -1'
	1508	CALL abort_physic (modname,abort_message,1)
	1509	ENDIF
	1510	!
	1511	!
	1512	! Initialiser les compteurs:
	1513	!
	1514	itap = 0
	1515	itaprad = 0
[2707]	1516	itapcv = 0
[2730]	1517	itapwk = 0
[878]	1518
[2469]	1519	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1520	!! Un petit travail \`a faire ici.
	1521	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[878]	1522
[2692]	1523	IF (iflag_pbl>1) THEN
[2469]	1524	PRINT*, "Using method MELLOR&YAMADA"
[2692]	1525	ENDIF
[956]	1526
[2469]	1527	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1528	! FH 2008/05/02 changement lie a la lecture de nbapp_rad dans
	1529	! phylmd plutot que dyn3d
	1530	! Attention : la version precedente n'etait pas tres propre.
	1531	! Il se peut qu'il faille prendre une valeur differente de nbapp_rad
	1532	! pour obtenir le meme resultat.
[2731]	1533	!jyg for fh<
[3435]	1534	WRITE(lunout,*) 'Pas de temps phys_tstep pdtphys ',phys_tstep,pdtphys
	1535	IF (abs(phys_tstep-pdtphys)>1.e-10) THEN
[2731]	1536	abort_message='pas de temps doit etre entier en seconde pour orchidee et XIOS'
	1537	CALL abort_physic(modname,abort_message,1)
	1538	ENDIF
	1539	!>jyg
[3435]	1540	IF (MOD(NINT(86400./phys_tstep),nbapp_rad).EQ.0) THEN
	1541	radpas = NINT( 86400./phys_tstep)/nbapp_rad
[2469]	1542	ELSE
	1543	WRITE(lunout,*) 'le nombre de pas de temps physique doit etre un ', &
	1544	'multiple de nbapp_rad'
	1545	WRITE(lunout,*) 'changer nbapp_rad ou alors commenter ce test ', &
	1546	'mais 1+1<>2'
	1547	abort_message='nbre de pas de temps physique n est pas multiple ' &
	1548	// 'de nbapp_rad'
[2692]	1549	CALL abort_physic(modname,abort_message,1)
[2469]	1550	ENDIF
[3435]	1551	IF (nbapp_cv .EQ. 0) nbapp_cv=86400./phys_tstep
	1552	IF (nbapp_wk .EQ. 0) nbapp_wk=86400./phys_tstep
[2730]	1553	print *,'physiq, nbapp_cv, nbapp_wk ',nbapp_cv,nbapp_wk
[3435]	1554	IF (MOD(NINT(86400./phys_tstep),nbapp_cv).EQ.0) THEN
	1555	cvpas_0 = NINT( 86400./phys_tstep)/nbapp_cv
[3150]	1556	cvpas = cvpas_0
[2707]	1557	print *,'physiq, cvpas ',cvpas
	1558	ELSE
	1559	WRITE(lunout,*) 'le nombre de pas de temps physique doit etre un ', &
	1560	'multiple de nbapp_cv'
	1561	WRITE(lunout,*) 'changer nbapp_cv ou alors commenter ce test ', &
	1562	'mais 1+1<>2'
	1563	abort_message='nbre de pas de temps physique n est pas multiple ' &
	1564	// 'de nbapp_cv'
[3461]	1565	CALL abort_physic(modname,abort_message,1)
[2707]	1566	ENDIF
[3435]	1567	IF (MOD(NINT(86400./phys_tstep),nbapp_wk).EQ.0) THEN
	1568	wkpas = NINT( 86400./phys_tstep)/nbapp_wk
[3457]	1569	! print *,'physiq, wkpas ',wkpas
[2730]	1570	ELSE
	1571	WRITE(lunout,*) 'le nombre de pas de temps physique doit etre un ', &
	1572	'multiple de nbapp_wk'
	1573	WRITE(lunout,*) 'changer nbapp_wk ou alors commenter ce test ', &
	1574	'mais 1+1<>2'
	1575	abort_message='nbre de pas de temps physique n est pas multiple ' &
	1576	// 'de nbapp_wk'
[3461]	1577	CALL abort_physic(modname,abort_message,1)
[2730]	1578	ENDIF
[2469]	1579	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[3465]	1580	CALL init_iophy_new(latitude_deg,longitude_deg)
[524]	1581
[3435]	1582	!===================================================================
	1583	!IM stations CFMIP
	1584	nCFMIP=npCFMIP
	1585	OPEN(98,file='npCFMIP_param.data',status='old', &
	1586	form='formatted',iostat=iostat)
	1587	IF (iostat == 0) THEN
	1588	READ(98,*,end=998) nCFMIP
	1589	998 CONTINUE
	1590	CLOSE(98)
	1591	CONTINUE
	1592	IF(nCFMIP.GT.npCFMIP) THEN
	1593	print*,'nCFMIP > npCFMIP : augmenter npCFMIP et recompiler'
	1594	CALL abort_physic("physiq", "", 1)
	1595	ELSE
	1596	print*,'physiq npCFMIP=',npCFMIP,'nCFMIP=',nCFMIP
	1597	ENDIF
	1598
	1599	!
	1600	ALLOCATE(tabCFMIP(nCFMIP))
	1601	ALLOCATE(lonCFMIP(nCFMIP), latCFMIP(nCFMIP))
	1602	ALLOCATE(tabijGCM(nCFMIP))
	1603	ALLOCATE(lonGCM(nCFMIP), latGCM(nCFMIP))
	1604	ALLOCATE(iGCM(nCFMIP), jGCM(nCFMIP))
	1605	!
	1606	! lecture des nCFMIP stations CFMIP, de leur numero
	1607	! et des coordonnees geographiques lonCFMIP, latCFMIP
	1608	!
	1609	CALL read_CFMIP_point_locations(nCFMIP, tabCFMIP, &
	1610	lonCFMIP, latCFMIP)
	1611	!
	1612	! identification des
	1613	! 1) coordonnees lonGCM, latGCM des points CFMIP dans la
	1614	! grille de LMDZ
	1615	! 2) indices points tabijGCM de la grille physique 1d sur
	1616	! klon points
	1617	! 3) indices iGCM, jGCM de la grille physique 2d
	1618	!
	1619	CALL LMDZ_CFMIP_point_locations(nCFMIP, lonCFMIP, latCFMIP, &
	1620	tabijGCM, lonGCM, latGCM, iGCM, jGCM)
	1621	!
	1622	ELSE
	1623	ALLOCATE(tabijGCM(0))
	1624	ALLOCATE(lonGCM(0), latGCM(0))
	1625	ALLOCATE(iGCM(0), jGCM(0))
	1626	ENDIF
	1627
	1628	#ifdef CPP_IOIPSL
	1629
	1630	!$OMP MASTER
	1631	! FH : if ok_sync=.true. , the time axis is written at each time step
	1632	! in the output files. Only at the end in the opposite case
[3461]	1633	ok_sync_omp=.FALSE.
[3435]	1634	CALL getin('ok_sync',ok_sync_omp)
	1635	CALL phys_output_open(longitude_deg,latitude_deg,nCFMIP,tabijGCM, &
	1636	iGCM,jGCM,lonGCM,latGCM, &
	1637	jjmp1,nlevSTD,clevSTD,rlevSTD, phys_tstep,ok_veget, &
	1638	type_ocean,iflag_pbl,iflag_pbl_split,ok_mensuel,ok_journe, &
	1639	ok_hf,ok_instan,ok_LES,ok_ade,ok_aie, &
	1640	read_climoz, phys_out_filestations, &
[3630]	1641	aerosol_couple, &
[3435]	1642	flag_aerosol_strat, pdtphys, paprs, pphis, &
	1643	pplay, lmax_th, ptconv, ptconvth, ivap, &
	1644	d_u, d_t, qx, d_qx, zmasse, ok_sync_omp)
	1645	!$OMP END MASTER
	1646	!$OMP BARRIER
	1647	ok_sync=ok_sync_omp
	1648
	1649	freq_outNMC(1) = ecrit_files(7)
	1650	freq_outNMC(2) = ecrit_files(8)
	1651	freq_outNMC(3) = ecrit_files(9)
	1652	WRITE(lunout,*)'OK freq_outNMC(1)=',freq_outNMC(1)
	1653	WRITE(lunout,*)'OK freq_outNMC(2)=',freq_outNMC(2)
	1654	WRITE(lunout,*)'OK freq_outNMC(3)=',freq_outNMC(3)
	1655
	1656	#ifndef CPP_XIOS
	1657	CALL ini_paramLMDZ_phy(phys_tstep,nid_ctesGCM)
	1658	#endif
	1659
	1660	#endif
	1661	ecrit_reg = ecrit_reg * un_jour
	1662	ecrit_tra = ecrit_tra * un_jour
	1663
	1664	!XXXPB Positionner date0 pour initialisation de ORCHIDEE
	1665	date0 = jD_ref
	1666	WRITE(,) 'physiq date0 : ',date0
	1667	!
	1668
	1669	! CALL create_climoz(read_climoz)
[3472]	1670	IF (.NOT. create_etat0_limit) CALL init_aero_fromfile(flag_aerosol) !! initialise aero from file for XIOS interpolation (unstructured_grid)
	1671	IF (.NOT. create_etat0_limit) CALL init_readaerosolstrato(flag_aerosol_strat) !! initialise aero strato from file for XIOS interpolation (unstructured_grid)
[3435]	1672
	1673	#ifdef CPP_COSP
	1674	IF (ok_cosp) THEN
[3726]	1675	! DO k = 1, klev
	1676	! DO i = 1, klon
	1677	! phicosp(i,k) = pphi(i,k) + pphis(i)
	1678	! ENDDO
	1679	! ENDDO
[3465]	1680	CALL phys_cosp(itap,phys_tstep,freq_cosp, &
[3435]	1681	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
	1682	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
	1683	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
	1684	JrNt,ref_liq,ref_ice, &
	1685	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
	1686	zu10m,zv10m,pphis, &
	1687	zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, &
	1688	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
	1689	prfl(:,1:klev),psfl(:,1:klev), &
	1690	pmflxr(:,1:klev),pmflxs(:,1:klev), &
	1691	mr_ozone,cldtau, cldemi)
[3778]	1692	ENDIF
	1693	#endif
[3512]	1694
	1695	#ifdef CPP_COSP2
	1696	IF (ok_cosp) THEN
[3726]	1697	! DO k = 1, klev
	1698	! DO i = 1, klon
	1699	! phicosp(i,k) = pphi(i,k) + pphis(i)
	1700	! ENDDO
	1701	! ENDDO
[3512]	1702	CALL phys_cosp2(itap,phys_tstep,freq_cosp, &
	1703	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
	1704	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
	1705	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
	1706	JrNt,ref_liq,ref_ice, &
	1707	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
	1708	zu10m,zv10m,pphis, &
	1709	zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, &
	1710	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
	1711	prfl(:,1:klev),psfl(:,1:klev), &
	1712	pmflxr(:,1:klev),pmflxs(:,1:klev), &
	1713	mr_ozone,cldtau, cldemi)
	1714	ENDIF
	1715	#endif
	1716
	1717	#ifdef CPP_COSPV2
	1718	IF (ok_cosp) THEN
	1719	DO k = 1, klev
	1720	DO i = 1, klon
	1721	phicosp(i,k) = pphi(i,k) + pphis(i)
	1722	ENDDO
	1723	ENDDO
	1724	CALL lmdz_cosp_interface(itap,phys_tstep,freq_cosp, &
	1725	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
	1726	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
	1727	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
	1728	JrNt,ref_liq,ref_ice, &
	1729	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
	1730	zu10m,zv10m,pphis, &
	1731	phicosp,paprs(:,1:klev),pplay,zxtsol,t_seri, &
	1732	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
	1733	prfl(:,1:klev),psfl(:,1:klev), &
	1734	pmflxr(:,1:klev),pmflxs(:,1:klev), &
	1735	mr_ozone,cldtau, cldemi)
	1736	ENDIF
	1737	#endif
	1738
[3460]	1739	!
[3465]	1740	!
	1741	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[3460]	1742	! Nouvelle initialisation pour le rayonnement RRTM
[3465]	1743	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[3435]	1744
[3460]	1745	CALL iniradia(klon,klev,paprs(1,1:klev+1))
[4085]	1746
	1747	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1748	CALL wake_ini(rg,rd,rv,prt_level)
[4448]	1749	CALL yamada_ini(klon,lunout,prt_level)
[4449]	1750	CALL atke_ini(prt_level, lunout, RG, RD, RPI)
[4089]	1751	CALL thermcell_ini(iflag_thermals,prt_level,tau_thermals,lunout, &
	1752	& RG,RD,RCPD,RKAPPA,RLVTT,RETV)
[4380]	1753	IF (ok_new_lscp) then
	1754	CALL lscp_ini(pdtphys,ok_ice_sursat)
	1755	endif
[4085]	1756	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1757
[3956]	1758	!
	1759	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1760	! Initialisation des champs dans phytrac* qui sont utilises par phys_output_write*
	1761	!
	1762	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[3776]	1763
	1764	#ifdef CPP_Dust
	1765	! Quand on utilise SPLA, on force iflag_phytrac=1
	1766	CALL phytracr_spl_out_init()
	1767	CALL phys_output_write_spl(itap, pdtphys, paprs, pphis, &
	1768	pplay, lmax_th, aerosol_couple, &
	1769	ok_ade, ok_aie, ivap, ok_sync, &
	1770	ptconv, read_climoz, clevSTD, &
	1771	ptconvth, d_t, qx, d_qx, d_tr_dyn, zmasse, &
	1772	flag_aerosol, flag_aerosol_strat, ok_cdnc)
	1773	#else
	1774	! phys_output_write écrit des variables traceurs seulement si iflag_phytrac == 1
	1775	! donc seulement dans ce cas on doit appeler phytrac_init()
[3465]	1776	IF (iflag_phytrac == 1 ) THEN
	1777	CALL phytrac_init()
[3776]	1778	ENDIF
[3465]	1779	CALL phys_output_write(itap, pdtphys, paprs, pphis, &
	1780	pplay, lmax_th, aerosol_couple, &
[3630]	1781	ok_ade, ok_aie, ok_volcan, ivap, iliq, isol, ok_sync,&
[3465]	1782	ptconv, read_climoz, clevSTD, &
	1783	ptconvth, d_u, d_t, qx, d_qx, zmasse, &
	1784	flag_aerosol, flag_aerosol_strat, ok_cdnc)
[3776]	1785	#endif
[3460]	1786
[3776]	1787
[3435]	1788	#ifdef CPP_XIOS
	1789	IF (is_omp_master) CALL xios_update_calendar(1)
	1790	#endif
[3465]	1791	IF(read_climoz>=1 .AND. create_etat0_limit) CALL regr_horiz_time_climoz(read_climoz,ok_daily_climoz)
[3877]	1792	CALL create_etat0_limit_unstruct
	1793	CALL phyetat0 ("startphy.nc",clesphy0,tabcntr0)
[3435]	1794
[3465]	1795	!jyg<
[3577]	1796	IF (iflag_pbl<=1) THEN
	1797	! No TKE for Standard Physics
	1798	pbl_tke(:,:,:)=0.
	1799
	1800	ELSE IF (klon_glo==1) THEN
[3465]	1801	pbl_tke(:,:,is_ave) = 0.
	1802	DO nsrf=1,nbsrf
	1803	DO k = 1,klev+1
	1804	pbl_tke(:,k,is_ave) = pbl_tke(:,k,is_ave) &
	1805	+pctsrf(:,nsrf)*pbl_tke(:,k,nsrf)
	1806	ENDDO
	1807	ENDDO
[3988]	1808	ELSE
[3465]	1809	pbl_tke(:,:,is_ave) = 0. !ym missing init : maybe must be initialized in the same way that for klon_glo==1 ??
	1810	!>jyg
	1811	ENDIF
[2469]	1812	!IM begin
	1813	print*,'physiq: clwcon rnebcon ratqs',clwcon(1,1),rnebcon(1,1) &
	1814	,ratqs(1,1)
	1815	!IM end
[878]	1816
	1817
[2469]	1818	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1819	!
	1820	! on remet le calendrier a zero
	1821	!
	1822	IF (raz_date .eq. 1) THEN
	1823	itau_phy = 0
	1824	ENDIF
[524]	1825
[3435]	1826	! IF (ABS(phys_tstep-pdtphys).GT.0.001) THEN
	1827	! WRITE(lunout,*) 'Pas physique n est pas correct',phys_tstep, &
	1828	! pdtphys
	1829	! abort_message='Pas physique n est pas correct '
	1830	! ! call abort_physic(modname,abort_message,1)
	1831	! phys_tstep=pdtphys
	1832	! ENDIF
[2469]	1833	IF (nlon .NE. klon) THEN
	1834	WRITE(lunout,*)'nlon et klon ne sont pas coherents', nlon, &
	1835	klon
	1836	abort_message='nlon et klon ne sont pas coherents'
[2692]	1837	CALL abort_physic(modname,abort_message,1)
[2469]	1838	ENDIF
	1839	IF (nlev .NE. klev) THEN
	1840	WRITE(lunout,*)'nlev et klev ne sont pas coherents', nlev, &
	1841	klev
	1842	abort_message='nlev et klev ne sont pas coherents'
[2692]	1843	CALL abort_physic(modname,abort_message,1)
[2469]	1844	ENDIF
	1845	!
[3435]	1846	IF (phys_tstep*REAL(radpas).GT.21600..AND.iflag_cycle_diurne.GE.1) THEN
[2469]	1847	WRITE(lunout,*)'Nbre d appels au rayonnement insuffisant'
	1848	WRITE(lunout,*)"Au minimum 4 appels par jour si cycle diurne"
	1849	abort_message='Nbre d appels au rayonnement insuffisant'
[2692]	1850	CALL abort_physic(modname,abort_message,1)
[2469]	1851	ENDIF
[3956]	1852
	1853	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1854	! Initialisation pour la convection de K.E. et pour les poches froides
	1855	!
	1856	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1857
[2469]	1858	WRITE(lunout,*)"Clef pour la convection, iflag_con=", iflag_con
[3989]	1859	WRITE(lunout,*)"Clef pour le driver de la convection, ok_cvl=", ok_cvl
[2469]	1860	!
	1861	!KE43
	1862	! Initialisation pour la convection de K.E. (sb):
	1863	IF (iflag_con.GE.3) THEN
[524]	1864
[2469]	1865	WRITE(lunout,)"** Convection de Kerry Emanuel 4.3 "
	1866	WRITE(lunout,*) &
	1867	"On va utiliser le melange convectif des traceurs qui"
	1868	WRITE(lunout,*)"est calcule dans convect4.3"
	1869	WRITE(lunout,*)" !!! penser aux logical flags de phytrac"
[524]	1870
[2469]	1871	DO i = 1, klon
	1872	ema_cbmf(i) = 0.
	1873	ema_pcb(i) = 0.
	1874	ema_pct(i) = 0.
	1875	! ema_workcbmf(i) = 0.
	1876	ENDDO
	1877	!IM15/11/02 rajout initialisation ibas_con,itop_con cf. SB =>BEG
	1878	DO i = 1, klon
	1879	ibas_con(i) = 1
	1880	itop_con(i) = 1
	1881	ENDDO
	1882	!IM15/11/02 rajout initialisation ibas_con,itop_con cf. SB =>END
	1883	!================================================================
	1884	!CR:04.12.07: initialisations poches froides
	1885	! Controle de ALE et ALP pour la fermeture convective (jyg)
[2692]	1886	IF (iflag_wake>=1) THEN
[2469]	1887	CALL ini_wake(0.,0.,it_wape_prescr,wape_prescr,fip_prescr &
	1888	,alp_bl_prescr, ale_bl_prescr)
	1889	! 11/09/06 rajout initialisation ALE et ALP du wake et PBL(YU)
	1890	! print*,'apres ini_wake iflag_cld_th=', iflag_cld_th
[2638]	1891	!
	1892	! Initialize tendencies of wake state variables (for some flag values
	1893	! they are not computed).
	1894	d_deltat_wk(:,:) = 0.
	1895	d_deltaq_wk(:,:) = 0.
	1896	d_deltat_wk_gw(:,:) = 0.
	1897	d_deltaq_wk_gw(:,:) = 0.
	1898	d_deltat_vdf(:,:) = 0.
	1899	d_deltaq_vdf(:,:) = 0.
	1900	d_deltat_the(:,:) = 0.
	1901	d_deltaq_the(:,:) = 0.
	1902	d_deltat_ajs_cv(:,:) = 0.
	1903	d_deltaq_ajs_cv(:,:) = 0.
	1904	d_s_wk(:) = 0.
	1905	d_dens_wk(:) = 0.
[3956]	1906	ENDIF ! (iflag_wake>=1)
[973]	1907
[2469]	1908	! do i = 1,klon
	1909	! Ale_bl(i)=0.
	1910	! Alp_bl(i)=0.
	1911	! enddo
[1638]	1912
[3435]	1913	!ELSE
	1914	! ALLOCATE(tabijGCM(0))
	1915	! ALLOCATE(lonGCM(0), latGCM(0))
	1916	! ALLOCATE(iGCM(0), jGCM(0))
[3956]	1917	ENDIF ! (iflag_con.GE.3)
	1918	!
[2469]	1919	DO i=1,klon
	1920	rugoro(i) = f_rugoro * MAX(1.0e-05, zstd(i)*zsig(i)/2.0)
	1921	ENDDO
[1863]	1922
[2469]	1923	!34EK
	1924	IF (ok_orodr) THEN
[524]	1925
[2469]	1926	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1927	! FH sans doute a enlever de finitivement ou, si on le
	1928	! garde, l'activer justement quand ok_orodr = false.
	1929	! ce rugoro est utilise par la couche limite et fait double emploi
	1930	! avec les param\'etrisations sp\'ecifiques de Francois Lott.
	1931	! DO i=1,klon
	1932	! rugoro(i) = MAX(1.0e-05, zstd(i)*zsig(i)/2.0)
	1933	! ENDDO
	1934	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1935	IF (ok_strato) THEN
	1936	CALL SUGWD_strato(klon,klev,paprs,pplay)
	1937	ELSE
	1938	CALL SUGWD(klon,klev,paprs,pplay)
	1939	ENDIF
[1863]	1940
[2469]	1941	DO i=1,klon
	1942	zuthe(i)=0.
	1943	zvthe(i)=0.
[2692]	1944	IF (zstd(i).gt.10.) THEN
[2469]	1945	zuthe(i)=(1.-zgam(i))*cos(zthe(i))
	1946	zvthe(i)=(1.-zgam(i))*sin(zthe(i))
[2692]	1947	ENDIF
[2469]	1948	ENDDO
	1949	ENDIF
	1950	!
	1951	!
[3435]	1952	lmt_pas = NINT(86400./phys_tstep * 1.0) ! tous les jours
[2469]	1953	WRITE(lunout,*)'La frequence de lecture surface est de ', &
	1954	lmt_pas
	1955	!
	1956	capemaxcels = 't_max(X)'
	1957	t2mincels = 't_min(X)'
	1958	t2maxcels = 't_max(X)'
	1959	tinst = 'inst(X)'
	1960	tave = 'ave(X)'
	1961	!IM cf. AM 081204 BEG
[3465]	1962	write(lunout,*)'AVANT HIST IFLAG_CON=',iflag_con
[2469]	1963	!IM cf. AM 081204 END
	1964	!
	1965	!=============================================================
	1966	! Initialisation des sorties
	1967	!=============================================================
	1968
[3435]	1969	#ifdef CPP_XIOS
	1970	! Get "missing_val" value from XML files (from temperature variable)
	1971	!$OMP MASTER
	1972	CALL xios_get_field_attr("temp",default_value=missing_val_omp)
	1973	!$OMP END MASTER
	1974	!$OMP BARRIER
	1975	missing_val=missing_val_omp
	1976	#endif
	1977
[2679]	1978	#ifdef CPP_XIOS
[3778]	1979	! Need to put this initialisation after phyetat0 as in the coupled model the XIOS context is only
	1980	! initialised at that moment
	1981	! Get "missing_val" value from XML files (from temperature variable)
	1982	!$OMP MASTER
	1983	CALL xios_get_field_attr("temp",default_value=missing_val_omp)
	1984	!$OMP END MASTER
	1985	!$OMP BARRIER
	1986	missing_val=missing_val_omp
[3988]	1987	!
	1988	! Now we activate some double radiation call flags only if some
	1989	! diagnostics are requested, otherwise there is no point in doing this
	1990	IF (is_master) THEN
	1991	!--setting up swaero_diag to TRUE in XIOS case
	1992	IF (xios_field_is_active("topswad").OR.xios_field_is_active("topswad0").OR. &
	1993	xios_field_is_active("solswad").OR.xios_field_is_active("solswad0").OR. &
	1994	xios_field_is_active("topswai").OR.xios_field_is_active("solswai").OR. &
	1995	(iflag_rrtm==1.AND.(xios_field_is_active("toplwad").OR.xios_field_is_active("toplwad0").OR. &
	1996	xios_field_is_active("sollwad").OR.xios_field_is_active("sollwad0")))) &
	1997	!!!--for now these fields are not in the XML files so they are omitted
	1998	!!! xios_field_is_active("toplwai").OR.xios_field_is_active("sollwai") !))) &
	1999	swaero_diag=.TRUE.
	2000
	2001	!--setting up swaerofree_diag to TRUE in XIOS case
	2002	IF (xios_field_is_active("SWdnSFCcleanclr").OR.xios_field_is_active("SWupSFCcleanclr").OR. &
	2003	xios_field_is_active("SWupTOAcleanclr").OR.xios_field_is_active("rsucsaf").OR. &
	2004	xios_field_is_active("rsdcsaf") .OR. xios_field_is_active("LWdnSFCcleanclr").OR. &
	2005	xios_field_is_active("LWupTOAcleanclr")) &
	2006	swaerofree_diag=.TRUE.
	2007
	2008	!--setting up dryaod_diag to TRUE in XIOS case
	2009	DO naero = 1, naero_tot-1
	2010	IF (xios_field_is_active("dryod550_"//name_aero_tau(naero))) dryaod_diag=.TRUE.
	2011	ENDDO
	2012	!
	2013	!--setting up ok_4xCO2atm to TRUE in XIOS case
	2014	IF (xios_field_is_active("rsut4co2").OR.xios_field_is_active("rlut4co2").OR. &
	2015	xios_field_is_active("rsutcs4co2").OR.xios_field_is_active("rlutcs4co2").OR. &
	2016	xios_field_is_active("rsu4co2").OR.xios_field_is_active("rsucs4co2").OR. &
	2017	xios_field_is_active("rsd4co2").OR.xios_field_is_active("rsdcs4co2").OR. &
	2018	xios_field_is_active("rlu4co2").OR.xios_field_is_active("rlucs4co2").OR. &
	2019	xios_field_is_active("rld4co2").OR.xios_field_is_active("rldcs4co2")) &
	2020	ok_4xCO2atm=.TRUE.
	2021	ENDIF
	2022	!$OMP BARRIER
	2023	CALL bcast(swaero_diag)
	2024	CALL bcast(swaerofree_diag)
	2025	CALL bcast(dryaod_diag)
	2026	CALL bcast(ok_4xCO2atm)
[2679]	2027	#endif
[3988]	2028	!
[3435]	2029	CALL printflag( tabcntr0,radpas,ok_journe, &
	2030	ok_instan, ok_region )
[2469]	2031	!
	2032	!
	2033	! Prescrire l'ozone dans l'atmosphere
	2034	!
	2035	!c DO i = 1, klon
	2036	!c DO k = 1, klev
	2037	!c CALL o3cm (paprs(i,k)/100.,paprs(i,k+1)/100., wo(i,k),20)
	2038	!c ENDDO
	2039	!c ENDDO
	2040	!
[4389]	2041	IF (ANY(type_trac == ['inca','inco'])) THEN ! ModThL
[524]	2042	#ifdef INCA
[2469]	2043	CALL VTe(VTphysiq)
	2044	CALL VTb(VTinca)
	2045	calday = REAL(days_elapsed) + jH_cur
	2046	WRITE(lunout,*) 'initial time chemini', days_elapsed, calday
[959]	2047
[4127]	2048	call init_const_lmdz( &
	2049	ndays, nbsrf, is_oce,is_sic, is_ter,is_lic, calend, &
	2050	config_inca)
	2051
	2052	CALL init_inca_geometry( &
	2053	longitude, latitude, &
	2054	boundslon, boundslat, &
[4224]	2055	cell_area, ind_cell_glo)
[4127]	2056
[4224]	2057	if (grid_type==unstructured) THEN
	2058	CALL chemini( pplay, &
	2059	nbp_lon, nbp_lat, &
	2060	latitude_deg, &
	2061	longitude_deg, &
	2062	presnivs, &
	2063	calday, &
	2064	klon, &
	2065	nqtot, &
	2066	nqo+nqCO2, &
	2067	pdtphys, &
	2068	annee_ref, &
	2069	year_cur, &
	2070	day_ref, &
	2071	day_ini, &
	2072	start_time, &
	2073	itau_phy, &
	2074	date0, &
	2075	chemistry_couple, &
	2076	init_source, &
	2077	init_tauinca, &
	2078	init_pizinca, &
	2079	init_cginca, &
	2080	init_ccminca)
	2081	ELSE
	2082	CALL chemini( pplay, &
	2083	nbp_lon, nbp_lat, &
	2084	latitude_deg, &
	2085	longitude_deg, &
	2086	presnivs, &
	2087	calday, &
	2088	klon, &
	2089	nqtot, &
	2090	nqo+nqCO2, &
	2091	pdtphys, &
	2092	annee_ref, &
	2093	year_cur, &
	2094	day_ref, &
	2095	day_ini, &
	2096	start_time, &
	2097	itau_phy, &
	2098	date0, &
	2099	chemistry_couple, &
	2100	init_source, &
	2101	init_tauinca, &
	2102	init_pizinca, &
	2103	init_cginca, &
	2104	init_ccminca, &
	2105	io_lon, &
	2106	io_lat)
	2107	ENDIF
[4127]	2108
[959]	2109
[3418]	2110	! initialisation des variables depuis le restart de inca
	2111	ccm(:,:,:) = init_ccminca
	2112	tau_aero(:,:,:,:) = init_tauinca
	2113	piz_aero(:,:,:,:) = init_pizinca
	2114	cg_aero(:,:,:,:) = init_cginca
	2115	!
	2116
	2117
[2469]	2118	CALL VTe(VTinca)
	2119	CALL VTb(VTphysiq)
[524]	2120	#endif
[2692]	2121	ENDIF
[3988]	2122	!
[4389]	2123	IF (type_trac == 'repr') THEN
[3666]	2124	#ifdef REPROBUS
	2125	CALL chemini_rep( &
	2126	presnivs, &
	2127	pdtphys, &
	2128	annee_ref, &
	2129	day_ref, &
	2130	day_ini, &
	2131	start_time, &
	2132	itau_phy, &
	2133	io_lon, &
	2134	io_lat)
	2135	#endif
	2136	ENDIF
[3465]	2137
[2469]	2138	!$omp single
[2788]	2139	IF (read_climoz >= 1) CALL open_climoz(ncid_climoz, press_cen_climoz, &
[2820]	2140	press_edg_climoz, time_climoz, ok_daily_climoz, adjust_tropopause)
[2469]	2141	!$omp end single
	2142	!
	2143	!IM betaCRF
	2144	pfree=70000. !Pa
	2145	beta_pbl=1.
	2146	beta_free=1.
	2147	lon1_beta=-180.
	2148	lon2_beta=+180.
	2149	lat1_beta=90.
	2150	lat2_beta=-90.
	2151	mskocean_beta=.FALSE.
[1539]	2152
[2469]	2153	!albedo SB >>>
[3461]	2154	SELECT CASE(nsw)
	2155	CASE(2)
[2469]	2156	SFRWL(1)=0.45538747
	2157	SFRWL(2)=0.54461211
[3461]	2158	CASE(4)
[2469]	2159	SFRWL(1)=0.45538747
	2160	SFRWL(2)=0.32870591
	2161	SFRWL(3)=0.18568763
	2162	SFRWL(4)=3.02191470E-02
[3461]	2163	CASE(6)
[2469]	2164	SFRWL(1)=1.28432794E-03
	2165	SFRWL(2)=0.12304168
	2166	SFRWL(3)=0.33106142
	2167	SFRWL(4)=0.32870591
	2168	SFRWL(5)=0.18568763
	2169	SFRWL(6)=3.02191470E-02
[3461]	2170	END SELECT
[2469]	2171	!albedo SB <<<
[2227]	2172
[2469]	2173	OPEN(99,file='beta_crf.data',status='old', &
	2174	form='formatted',err=9999)
	2175	READ(99,*,end=9998) pfree
	2176	READ(99,*,end=9998) beta_pbl
	2177	READ(99,*,end=9998) beta_free
	2178	READ(99,*,end=9998) lon1_beta
	2179	READ(99,*,end=9998) lon2_beta
	2180	READ(99,*,end=9998) lat1_beta
	2181	READ(99,*,end=9998) lat2_beta
	2182	READ(99,*,end=9998) mskocean_beta
	2183	9998 Continue
	2184	CLOSE(99)
	2185	9999 Continue
	2186	WRITE(,)'pfree=',pfree
	2187	WRITE(,)'beta_pbl=',beta_pbl
	2188	WRITE(,)'beta_free=',beta_free
	2189	WRITE(,)'lon1_beta=',lon1_beta
	2190	WRITE(,)'lon2_beta=',lon2_beta
	2191	WRITE(,)'lat1_beta=',lat1_beta
	2192	WRITE(,)'lat2_beta=',lat2_beta
	2193	WRITE(,)'mskocean_beta=',mskocean_beta
[3048]	2194
	2195	!lwoff=y : offset LW CRE for radiation code and other schemes
	2196	!lwoff=y : betalwoff=1.
	2197	betalwoff=0.
	2198	IF (ok_lwoff) THEN
	2199	betalwoff=1.
	2200	ENDIF
	2201	WRITE(,)'ok_lwoff=',ok_lwoff
	2202	!
	2203	!lwoff=y to begin only sollw and sollwdown are set up to CS values
	2204	sollw = sollw + betalwoff * (sollw0 - sollw)
	2205	sollwdown(:)= sollwdown(:) + betalwoff (-1.ZFLDN0(:,1) - &
	2206	sollwdown(:))
[3597]	2207
	2208
[4085]	2209
[2469]	2210	ENDIF
	2211	!
	2212	! ************** Fin de IF ( debut ) *************
	2213	!
	2214	!
	2215	! Incrementer le compteur de la physique
	2216	!
	2217	itap = itap + 1
[2795]	2218	IF (is_master .OR. prt_level > 9) THEN
[2783]	2219	IF (prt_level > 5 .or. MOD(itap,5) == 0) THEN
[2795]	2220	WRITE(LUNOUT,*)'Entering physics elapsed seconds since start ', current_time
	2221	WRITE(LUNOUT,100)year_cur,mth_cur,day_cur,hour/3600.
	2222	100 FORMAT('Date = ',i4.4,' / ',i2.2, ' / ',i2.2,' : ',f20.17)
[2783]	2223	ENDIF
	2224	ENDIF
[2469]	2225	!
	2226	!
	2227	! Update fraction of the sub-surfaces (pctsrf) and
	2228	! initialize, where a new fraction has appeared, all variables depending
	2229	! on the surface fraction.
	2230	!
[3435]	2231	CALL change_srf_frac(itap, phys_tstep, days_elapsed+1, &
[2469]	2232	pctsrf, fevap, z0m, z0h, agesno, &
	2233	falb_dir, falb_dif, ftsol, ustar, u10m, v10m, pbl_tke)
[996]	2234
[2469]	2235	! Update time and other variables in Reprobus
[4389]	2236	IF (type_trac == 'repr') THEN
[1565]	2237	#ifdef REPROBUS
[2469]	2238	CALL Init_chem_rep_xjour(jD_cur-jD_ref+day_ref)
	2239	print*,'xjour equivalent rjourvrai',jD_cur-jD_ref+day_ref
	2240	CALL Rtime(debut)
[1565]	2241	#endif
[2692]	2242	ENDIF
[1565]	2243
[2469]	2244	! Tendances bidons pour les processus qui n'affectent pas certaines
	2245	! variables.
	2246	du0(:,:)=0.
	2247	dv0(:,:)=0.
	2248	dt0 = 0.
	2249	dq0(:,:)=0.
	2250	dql0(:,:)=0.
	2251	dqi0(:,:)=0.
[2635]	2252	dsig0(:) = 0.
	2253	ddens0(:) = 0.
	2254	wkoccur1(:)=1
[2469]	2255	!
	2256	! Mettre a zero des variables de sortie (pour securite)
	2257	!
	2258	DO i = 1, klon
	2259	d_ps(i) = 0.0
	2260	ENDDO
	2261	DO k = 1, klev
	2262	DO i = 1, klon
	2263	d_t(i,k) = 0.0
	2264	d_u(i,k) = 0.0
	2265	d_v(i,k) = 0.0
	2266	ENDDO
	2267	ENDDO
	2268	DO iq = 1, nqtot
	2269	DO k = 1, klev
	2270	DO i = 1, klon
	2271	d_qx(i,k,iq) = 0.0
	2272	ENDDO
	2273	ENDDO
	2274	ENDDO
	2275	beta_prec_fisrt(:,:)=0.
	2276	beta_prec(:,:)=0.
[3134]	2277	!
	2278	! Output variables from the convective scheme should not be set to 0
	2279	! since convection is not always called at every time step.
	2280	IF (ok_bug_cv_trac) THEN
	2281	da(:,:)=0.
	2282	mp(:,:)=0.
	2283	phi(:,:,:)=0.
	2284	! RomP >>>
	2285	phi2(:,:,:)=0.
	2286	epmlmMm(:,:,:)=0.
	2287	eplaMm(:,:)=0.
	2288	d1a(:,:)=0.
	2289	dam(:,:)=0.
	2290	pmflxr(:,:)=0.
	2291	pmflxs(:,:)=0.
	2292	! RomP <<<
	2293	ENDIF
[2469]	2294	!
	2295	! Ne pas affecter les valeurs entrees de u, v, h, et q
	2296	!
	2297	DO k = 1, klev
	2298	DO i = 1, klon
	2299	t_seri(i,k) = t(i,k)
	2300	u_seri(i,k) = u(i,k)
	2301	v_seri(i,k) = v(i,k)
	2302	q_seri(i,k) = qx(i,k,ivap)
	2303	ql_seri(i,k) = qx(i,k,iliq)
	2304	!CR: ATTENTION, on rajoute la variable glace
[4098]	2305	IF (nqo.EQ.2) THEN !--vapour and liquid only
[2469]	2306	qs_seri(i,k) = 0.
[4066]	2307	rneb_seri(i,k) = 0.
[4098]	2308	ELSE IF (nqo.EQ.3) THEN !--vapour, liquid and ice
[2469]	2309	qs_seri(i,k) = qx(i,k,isol)
[4066]	2310	rneb_seri(i,k) = 0.
[4098]	2311	ELSE IF (nqo.EQ.4) THEN !--vapour, liquid, ice and rneb
[4059]	2312	qs_seri(i,k) = qx(i,k,isol)
	2313	rneb_seri(i,k) = qx(i,k,irneb)
[2692]	2314	ENDIF
[2469]	2315	ENDDO
	2316	ENDDO
[2476]	2317	!
	2318	!--OB mass fixer
	2319	IF (mass_fixer) THEN
	2320	!--store initial water burden
	2321	qql1(:)=0.0
[2499]	2322	DO k = 1, klev
	2323	qql1(:)=qql1(:)+(q_seri(:,k)+ql_seri(:,k)+qs_seri(:,k))*zmasse(:,k)
[2476]	2324	ENDDO
	2325	ENDIF
	2326	!--fin mass fixer
	2327
[2469]	2328	tke0(:,:)=pbl_tke(:,:,is_ave)
[4056]	2329	IF (nqtot > nqo) THEN
	2330	! water isotopes are not included in tr_seri
	2331	itr = 0
	2332	DO iq = 1, nqtot
[4071]	2333	IF(.NOT.tracers(iq)%isInPhysics) CYCLE
[4056]	2334	itr = itr+1
[2469]	2335	DO k = 1, klev
	2336	DO i = 1, klon
[4056]	2337	tr_seri(i,k,itr) = qx(i,k,iq)
[2469]	2338	ENDDO
	2339	ENDDO
	2340	ENDDO
	2341	ELSE
[4056]	2342	! DC: make sure the final "1" index was meant for 1st H2O phase (vapor) !!!
[4120]	2343	tr_seri(:,:,strIdx(tracers(:)%name,addPhase('H2O','g'))) = 0.0
[2469]	2344	ENDIF
[3599]	2345	!
	2346	! Temporary solutions adressing ticket #104 and the non initialisation of tr_ancien
	2347	! LF
	2348	IF (debut) THEN
	2349	WRITE(lunout,*)' WARNING: tr_ancien initialised to tr_seri'
[4056]	2350	itr = 0
	2351	do iq = 1, nqtot
[4071]	2352	IF(.NOT.tracers(iq)%isInPhysics) CYCLE
[4056]	2353	itr = itr+1
	2354	tr_ancien(:,:,itr)=tr_seri(:,:,itr)
	2355	enddo
[3599]	2356	ENDIF
[2469]	2357	!
	2358	DO i = 1, klon
	2359	ztsol(i) = 0.
	2360	ENDDO
	2361	DO nsrf = 1, nbsrf
	2362	DO i = 1, klon
	2363	ztsol(i) = ztsol(i) + ftsol(i,nsrf)*pctsrf(i,nsrf)
	2364	ENDDO
	2365	ENDDO
[2611]	2366	! Initialize variables used for diagnostic purpose
[2692]	2367	IF (flag_inhib_tend .ne. 0) CALL init_cmp_seri
[524]	2368
[2469]	2369	! Diagnostiquer la tendance dynamique
	2370	!
	2371	IF (ancien_ok) THEN
[2499]	2372	!
[3435]	2373	d_u_dyn(:,:) = (u_seri(:,:)-u_ancien(:,:))/phys_tstep
	2374	d_v_dyn(:,:) = (v_seri(:,:)-v_ancien(:,:))/phys_tstep
	2375	d_t_dyn(:,:) = (t_seri(:,:)-t_ancien(:,:))/phys_tstep
	2376	d_q_dyn(:,:) = (q_seri(:,:)-q_ancien(:,:))/phys_tstep
	2377	d_ql_dyn(:,:) = (ql_seri(:,:)-ql_ancien(:,:))/phys_tstep
	2378	d_qs_dyn(:,:) = (qs_seri(:,:)-qs_ancien(:,:))/phys_tstep
[2499]	2379	CALL water_int(klon,klev,q_seri,zmasse,zx_tmp_fi2d)
[3435]	2380	d_q_dyn2d(:)=(zx_tmp_fi2d(:)-prw_ancien(:))/phys_tstep
[2499]	2381	CALL water_int(klon,klev,ql_seri,zmasse,zx_tmp_fi2d)
[3435]	2382	d_ql_dyn2d(:)=(zx_tmp_fi2d(:)-prlw_ancien(:))/phys_tstep
[2499]	2383	CALL water_int(klon,klev,qs_seri,zmasse,zx_tmp_fi2d)
[3435]	2384	d_qs_dyn2d(:)=(zx_tmp_fi2d(:)-prsw_ancien(:))/phys_tstep
[2469]	2385	! !! RomP >>> td dyn traceur
[4056]	2386	IF (nqtot > nqo) d_tr_dyn(:,:,:)=(tr_seri(:,:,:)-tr_ancien(:,:,:))/phys_tstep
[2469]	2387	! !! RomP <<<
[4059]	2388	!!d_rneb_dyn(:,:)=(rneb_seri(:,:)-rneb_ancien(:,:))/phys_tstep
	2389	d_rneb_dyn(:,:)=0.0
[2469]	2390	ELSE
[2499]	2391	d_u_dyn(:,:) = 0.0
	2392	d_v_dyn(:,:) = 0.0
	2393	d_t_dyn(:,:) = 0.0
	2394	d_q_dyn(:,:) = 0.0
	2395	d_ql_dyn(:,:) = 0.0
	2396	d_qs_dyn(:,:) = 0.0
	2397	d_q_dyn2d(:) = 0.0
	2398	d_ql_dyn2d(:) = 0.0
	2399	d_qs_dyn2d(:) = 0.0
[2469]	2400	! !! RomP >>> td dyn traceur
[4056]	2401	IF (nqtot > nqo) d_tr_dyn(:,:,:)= 0.0
[2469]	2402	! !! RomP <<<
[4059]	2403	d_rneb_dyn(:,:)=0.0
[2469]	2404	ancien_ok = .TRUE.
	2405	ENDIF
	2406	!
	2407	! Ajouter le geopotentiel du sol:
	2408	!
	2409	DO k = 1, klev
	2410	DO i = 1, klon
	2411	zphi(i,k) = pphi(i,k) + pphis(i)
	2412	ENDDO
	2413	ENDDO
	2414	!
	2415	! Verifier les temperatures
	2416	!
	2417	!IM BEG
	2418	IF (check) THEN
	2419	amn=MIN(ftsol(1,is_ter),1000.)
	2420	amx=MAX(ftsol(1,is_ter),-1000.)
	2421	DO i=2, klon
	2422	amn=MIN(ftsol(i,is_ter),amn)
	2423	amx=MAX(ftsol(i,is_ter),amx)
	2424	ENDDO
	2425	!
	2426	PRINT*,' debut avant hgardfou min max ftsol',itap,amn,amx
	2427	ENDIF !(check) THEN
	2428	!IM END
	2429	!
	2430	CALL hgardfou(t_seri,ftsol,'debutphy',abortphy)
	2431	IF (abortphy==1) Print*,'ERROR ABORT hgardfou debutphy'
[2235]	2432
[2469]	2433	!
	2434	!IM BEG
	2435	IF (check) THEN
	2436	amn=MIN(ftsol(1,is_ter),1000.)
	2437	amx=MAX(ftsol(1,is_ter),-1000.)
	2438	DO i=2, klon
	2439	amn=MIN(ftsol(i,is_ter),amn)
	2440	amx=MAX(ftsol(i,is_ter),amx)
	2441	ENDDO
	2442	!
	2443	PRINT*,' debut apres hgardfou min max ftsol',itap,amn,amx
	2444	ENDIF !(check) THEN
	2445	!IM END
	2446	!
	2447	! Mettre en action les conditions aux limites (albedo, sst, etc.).
	2448	! Prescrire l'ozone et calculer l'albedo sur l'ocean.
	2449	!
[2661]	2450	! Update ozone if day change
	2451	IF (MOD(itap-1,lmt_pas) == 0) THEN
[2774]	2452	IF (read_climoz <= 0) THEN
	2453	! Once per day, update ozone from Royer:
	2454	IF (solarlong0<-999.) then
	2455	! Generic case with evolvoing season
	2456	zzz=real(days_elapsed+1)
	2457	ELSE IF (abs(solarlong0-1000.)<1.e-4) then
	2458	! Particular case with annual mean insolation
	2459	zzz=real(90) ! could be revisited
	2460	IF (read_climoz/=-1) THEN
	2461	abort_message ='read_climoz=-1 is recommended when ' &
	2462	// 'solarlong0=1000.'
	2463	CALL abort_physic (modname,abort_message,1)
	2464	ENDIF
	2465	ELSE
	2466	! Case where the season is imposed with solarlong0
	2467	zzz=real(90) ! could be revisited
	2468	ENDIF
[2661]	2469
[2774]	2470	wo(:,:,1)=ozonecm(latitude_deg, paprs,read_climoz,rjour=zzz)
[3666]	2471	#ifdef REPROBUS
	2472	ptrop=dyn_tropopause(t_seri, ztsol, paprs, pplay, rot)/100.
	2473	DO i = 1, klon
	2474	Z1=t_seri(i,itroprep(i)+1)
	2475	Z2=t_seri(i,itroprep(i))
	2476	fac=(Z1-Z2)/alog(pplay(i,itroprep(i)+1)/pplay(i,itroprep(i)))
	2477	B=Z2-fac*alog(pplay(i,itroprep(i)))
	2478	ttrop(i)= fac*alog(ptrop(i))+B
	2479	!
	2480	Z1= 1.e-3 * ( pphi(i,itroprep(i)+1)+pphis(i) ) / gravit
	2481	Z2= 1.e-3 * ( pphi(i,itroprep(i)) +pphis(i) ) / gravit
	2482	fac=(Z1-Z2)/alog(pplay(i,itroprep(i)+1)/pplay(i,itroprep(i)))
	2483	B=Z2-fac*alog(pplay(i,itroprep(i)))
	2484	ztrop(i)=fac*alog(ptrop(i))+B
	2485	ENDDO
	2486	#endif
[2774]	2487	ELSE
[2820]	2488	!--- ro3i = elapsed days number since current year 1st january, 0h
	2489	ro3i=days_elapsed+jh_cur-jh_1jan
	2490	!--- scaling for old style files (360 records)
	2491	IF(SIZE(time_climoz)==360.AND..NOT.ok_daily_climoz) ro3i=ro3i*360./year_len
[2788]	2492	IF(adjust_tropopause) THEN
[2820]	2493	CALL regr_pr_time_av(ncid_climoz, vars_climoz(1:read_climoz), &
[3086]	2494	ro3i, 'C', press_cen_climoz, pplay, wo, paprs(:,1), &
	2495	time_climoz , longitude_deg, latitude_deg, &
[2968]	2496	dyn_tropopause(t_seri, ztsol, paprs, pplay, rot))
[2774]	2497	ELSE
[3086]	2498	CALL regr_pr_time_av(ncid_climoz, vars_climoz(1:read_climoz), &
	2499	ro3i, 'C', press_cen_climoz, pplay, wo, paprs(:,1), &
	2500	time_climoz )
[3461]	2501	ENDIF
[2774]	2502	! Convert from mole fraction of ozone to column density of ozone in a
	2503	! cell, in kDU:
	2504	FORALL (l = 1: read_climoz) wo(:, :, l) = wo(:, :, l) * rmo3 / rmd &
	2505	* zmasse / dobson_u / 1e3
[2788]	2506	! (By regridding ozone values for LMDZ only once a day, we
[2774]	2507	! have already neglected the variation of pressure in one
	2508	! day. So do not recompute "wo" at each time step even if
	2509	! "zmasse" changes a little.)
	2510	ENDIF
[2469]	2511	ENDIF
	2512	!
	2513	! Re-evaporer l'eau liquide nuageuse
	2514	!
[2705]	2515	CALL reevap (klon,klev,iflag_ice_thermo,t_seri,q_seri,ql_seri,qs_seri, &
	2516	& d_t_eva,d_q_eva,d_ql_eva,d_qi_eva)
[1849]	2517
[2705]	2518	CALL add_phys_tend &
	2519	(du0,dv0,d_t_eva,d_q_eva,d_ql_eva,d_qi_eva,paprs,&
[2812]	2520	'eva',abortphy,flag_inhib_tend,itap,0)
[3461]	2521	CALL prt_enerbil('eva',itap)
[2086]	2522
[2469]	2523	!=========================================================================
	2524	! Calculs de l'orbite.
	2525	! Necessaires pour le rayonnement et la surface (calcul de l'albedo).
	2526	! doit donc etre plac\'e avant radlwsw et pbl_surface
[883]	2527
[2469]	2528	! !! jyg 17 Sep 2010 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[2692]	2529	CALL ymds2ju(year_cur, mth_eq, day_eq,0., jD_eq)
[2469]	2530	day_since_equinox = (jD_cur + jH_cur) - jD_eq
	2531	!
	2532	! choix entre calcul de la longitude solaire vraie ou valeur fixee a
	2533	! solarlong0
[2692]	2534	IF (solarlong0<-999.) THEN
	2535	IF (new_orbit) THEN
[2469]	2536	! calcul selon la routine utilisee pour les planetes
[2692]	2537	CALL solarlong(day_since_equinox, zlongi, dist)
	2538	ELSE
[2469]	2539	! calcul selon la routine utilisee pour l'AR4
	2540	CALL orbite(REAL(days_elapsed+1),zlongi,dist)
[2692]	2541	ENDIF
	2542	ELSE
[2469]	2543	zlongi=solarlong0 ! longitude solaire vraie
	2544	dist=1. ! distance au soleil / moyenne
[2692]	2545	ENDIF
[1529]	2546
[2692]	2547	IF (prt_level.ge.1) write(lunout,*)'Longitude solaire ',zlongi,solarlong0,dist
[524]	2548
[2692]	2549
[2469]	2550	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	2551	! Calcul de l'ensoleillement :
	2552	! ============================
	2553	! Pour une solarlong0=1000., on calcule un ensoleillement moyen sur
	2554	! l'annee a partir d'une formule analytique.
	2555	! Cet ensoleillement est sym\'etrique autour de l'\'equateur et
	2556	! non nul aux poles.
[2692]	2557	IF (abs(solarlong0-1000.)<1.e-4) THEN
	2558	CALL zenang_an(iflag_cycle_diurne.GE.1,jH_cur, &
[2469]	2559	latitude_deg,longitude_deg,rmu0,fract)
[2979]	2560	swradcorr(:) = 1.0
	2561	JrNt(:) = 1.0
	2562	zrmu0(:) = rmu0(:)
[2469]	2563	ELSE
	2564	! recode par Olivier Boucher en sept 2015
	2565	SELECT CASE (iflag_cycle_diurne)
	2566	CASE(0)
	2567	! Sans cycle diurne
	2568	CALL angle(zlongi, latitude_deg, fract, rmu0)
	2569	swradcorr = 1.0
	2570	JrNt = 1.0
	2571	zrmu0 = rmu0
	2572	CASE(1)
	2573	! Avec cycle diurne sans application des poids
	2574	! bit comparable a l ancienne formulation cycle_diurne=true
	2575	! on integre entre gmtime et gmtime+radpas
[3435]	2576	zdtime=phys_tstep*REAL(radpas) ! pas de temps du rayonnement (s)
[2469]	2577	CALL zenang(zlongi,jH_cur,0.0,zdtime, &
	2578	latitude_deg,longitude_deg,rmu0,fract)
	2579	zrmu0 = rmu0
	2580	swradcorr = 1.0
	2581	! Calcul du flag jour-nuit
	2582	JrNt = 0.0
	2583	WHERE (fract.GT.0.0) JrNt = 1.0
	2584	CASE(2)
	2585	! Avec cycle diurne sans application des poids
	2586	! On integre entre gmtime-pdtphys et gmtime+pdtphys*(radpas-1)
	2587	! Comme cette routine est appele a tous les pas de temps de
	2588	! la physique meme si le rayonnement n'est pas appele je
	2589	! remonte en arriere les radpas-1 pas de temps
	2590	! suivant. Petite ruse avec MOD pour prendre en compte le
	2591	! premier pas de temps de la physique pendant lequel
	2592	! itaprad=0
[3435]	2593	zdtime1=phys_tstep*REAL(-MOD(itaprad,radpas)-1)
	2594	zdtime2=phys_tstep*REAL(radpas-MOD(itaprad,radpas)-1)
[2469]	2595	CALL zenang(zlongi,jH_cur,zdtime1,zdtime2, &
	2596	latitude_deg,longitude_deg,rmu0,fract)
	2597	!
	2598	! Calcul des poids
	2599	!
[3435]	2600	zdtime1=-phys_tstep !--on corrige le rayonnement pour representer le
[2469]	2601	zdtime2=0.0 !--pas de temps de la physique qui se termine
	2602	CALL zenang(zlongi,jH_cur,zdtime1,zdtime2, &
	2603	latitude_deg,longitude_deg,zrmu0,zfract)
	2604	swradcorr = 0.0
	2605	WHERE (rmu0.GE.1.e-10 .OR. fract.GE.1.e-10) &
	2606	swradcorr=zfract/fract*zrmu0/rmu0
	2607	! Calcul du flag jour-nuit
	2608	JrNt = 0.0
	2609	WHERE (zfract.GT.0.0) JrNt = 1.0
	2610	END SELECT
	2611	ENDIF
[3110]	2612	sza_o = ACOS (rmu0) *180./pi
[782]	2613
[2692]	2614	IF (mydebug) THEN
	2615	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	2616	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	2617	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	2618	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	2619	ENDIF
[883]	2620
[2469]	2621	!cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
	2622	! Appel au pbl_surface : Planetary Boudary Layer et Surface
	2623	! Cela implique tous les interactions des sous-surfaces et la
	2624	! partie diffusion turbulent du couche limit.
	2625	!
	2626	! Certains varibales de sorties de pbl_surface sont utiliser que pour
	2627	! ecriture des fihiers hist_XXXX.nc, ces sont :
	2628	! qsol, zq2m, s_pblh, s_lcl,
	2629	! s_capCL, s_oliqCL, s_cteiCL,s_pblT,
	2630	! s_therm, s_trmb1, s_trmb2, s_trmb3,
	2631	! zu10m, zv10m, fder,
[3888]	2632	! zxqsurf, delta_qsurf,
	2633	! rh2m, zxfluxu, zxfluxv,
[2469]	2634	! frugs, agesno, fsollw, fsolsw,
	2635	! d_ts, fevap, fluxlat, t2m,
	2636	! wfbils, wfbilo, fluxt, fluxu, fluxv,
	2637	!
	2638	! Certains ne sont pas utiliser du tout :
	2639	! dsens, devap, zxsnow, zxfluxt, zxfluxq, q2m, fluxq
	2640	!
[1724]	2641
[2469]	2642	! Calcul de l'humidite de saturation au niveau du sol
[1724]	2643
	2644
[996]	2645
[2692]	2646	IF (iflag_pbl/=0) THEN
[2240]	2647
[2469]	2648	!jyg+nrlmd<
[2852]	2649	!!jyg IF (prt_level .ge. 2 .and. mod(iflag_pbl_split,2) .eq. 1) THEN
	2650	IF (prt_level .ge. 2 .and. mod(iflag_pbl_split,10) .ge. 1) THEN
[3179]	2651	print *,'debut du splitting de la PBL, wake_s = ', wake_s(:)
	2652	print *,'debut du splitting de la PBL, wake_deltat = ', wake_deltat(:,1)
	2653	print *,'debut du splitting de la PBL, wake_deltaq = ', wake_deltaq(:,1)
[2469]	2654	ENDIF
	2655	! !!
	2656	!>jyg+nrlmd
	2657	!
	2658	!-------gustiness calculation-------!
[3435]	2659	!ym : Warning gustiness non inialized for iflag_gusts=2 & iflag_gusts=3
	2660	gustiness=0 !ym missing init
	2661
[2469]	2662	IF (iflag_gusts==0) THEN
	2663	gustiness(1:klon)=0
	2664	ELSE IF (iflag_gusts==1) THEN
[3111]	2665	gustiness(1:klon)=f_gust_blale_bl(1:klon)+f_gust_wkale_wake(1:klon)
	2666	ELSE IF (iflag_gusts==2) THEN
	2667	gustiness(1:klon)=f_gust_blale_bl_stat(1:klon)+f_gust_wkale_wake(1:klon)
[2469]	2668	! ELSE IF (iflag_gusts==2) THEN
	2669	! do i = 1, klon
	2670	! gustiness(i)=f_gust_blale_bl(i)+sigma_wk(i)f_gust_wk&
	2671	! *ale_wake(i) !! need to make sigma_wk accessible here
	2672	! enddo
	2673	! ELSE IF (iflag_gusts==3) THEN
	2674	! do i = 1, klon
	2675	! gustiness(i)=f_gust_blalp_bl(i)+f_gust_wkalp_wake(i)
	2676	! enddo
	2677	ENDIF
[2278]	2678
[2469]	2679	CALL pbl_surface( &
[3435]	2680	phys_tstep, date0, itap, days_elapsed+1, &
[2469]	2681	debut, lafin, &
	2682	longitude_deg, latitude_deg, rugoro, zrmu0, &
[4056]	2683	sollwdown, cldt, &
[3756]	2684	rain_fall, snow_fall, solsw, solswfdiff, sollw, &
[2469]	2685	gustiness, &
	2686	t_seri, q_seri, u_seri, v_seri, &
	2687	!nrlmd+jyg<
	2688	wake_deltat, wake_deltaq, wake_cstar, wake_s, &
	2689	!>nrlmd+jyg
	2690	pplay, paprs, pctsrf, &
	2691	ftsol,SFRWL,falb_dir,falb_dif,ustar,u10m,v10m,wstar, &
	2692	!albedo SB <<<
	2693	cdragh, cdragm, u1, v1, &
[3888]	2694	beta_aridity, &
[2469]	2695	!albedo SB >>>
	2696	! albsol1, albsol2, sens, evap, &
	2697	albsol_dir, albsol_dif, sens, evap, &
	2698	!albedo SB <<<
	2699	albsol3_lic,runoff, snowhgt, qsnow, to_ice, sissnow, &
[3817]	2700	zxtsol, zxfluxlat, zt2m, qsat2m, zn2mout, &
[2469]	2701	d_t_vdf, d_q_vdf, d_u_vdf, d_v_vdf, d_t_diss, &
	2702	!nrlmd<
	2703	!jyg<
	2704	d_t_vdf_w, d_q_vdf_w, &
	2705	d_t_vdf_x, d_q_vdf_x, &
	2706	sens_x, zxfluxlat_x, sens_w, zxfluxlat_w, &
	2707	!>jyg
	2708	delta_tsurf,wake_dens, &
	2709	cdragh_x,cdragh_w,cdragm_x,cdragm_w, &
	2710	kh,kh_x,kh_w, &
	2711	!>nrlmd
	2712	coefh(1:klon,1:klev,1:nbsrf+1), coefm(1:klon,1:klev,1:nbsrf+1), &
	2713	slab_wfbils, &
	2714	qsol, zq2m, s_pblh, s_lcl, &
	2715	!jyg<
	2716	s_pblh_x, s_lcl_x, s_pblh_w, s_lcl_w, &
	2717	!>jyg
	2718	s_capCL, s_oliqCL, s_cteiCL,s_pblT, &
	2719	s_therm, s_trmb1, s_trmb2, s_trmb3, &
	2720	zustar, zu10m, zv10m, fder, &
[3888]	2721	zxqsurf, delta_qsurf, rh2m, zxfluxu, zxfluxv, &
[2469]	2722	z0m, z0h, agesno, fsollw, fsolsw, &
	2723	d_ts, fevap, fluxlat, t2m, &
[2670]	2724	wfbils, wfbilo, wfevap, wfrain, wfsnow, &
	2725	fluxt, fluxu, fluxv, &
[2469]	2726	dsens, devap, zxsnow, &
	2727	zxfluxt, zxfluxq, q2m, fluxq, pbl_tke, &
	2728	!nrlmd+jyg<
[2952]	2729	wake_delta_pbl_TKE, &
[2469]	2730	!>nrlmd+jyg
[2952]	2731	treedrg )
	2732	!FC
[2469]	2733	!
	2734	! Add turbulent diffusion tendency to the wake difference variables
[2852]	2735	!!jyg IF (mod(iflag_pbl_split,2) .NE. 0) THEN
	2736	IF (mod(iflag_pbl_split,10) .NE. 0) THEN
[2635]	2737	!jyg<
	2738	d_deltat_vdf(:,:) = d_t_vdf_w(:,:)-d_t_vdf_x(:,:)
	2739	d_deltaq_vdf(:,:) = d_q_vdf_w(:,:)-d_q_vdf_x(:,:)
	2740	CALL add_wake_tend &
[3208]	2741	(d_deltat_vdf, d_deltaq_vdf, dsig0, ddens0, ddens0, wkoccur1, 'vdf', abortphy)
[2635]	2742	ELSE
	2743	d_deltat_vdf(:,:) = 0.
	2744	d_deltaq_vdf(:,:) = 0.
	2745	!>jyg
[2469]	2746	ENDIF
[1624]	2747
[2469]	2748	!---------------------------------------------------------------------
	2749	! ajout des tendances de la diffusion turbulente
	2750	IF (klon_glo==1) THEN
	2751	CALL add_pbl_tend &
	2752	(d_u_vdf,d_v_vdf,d_t_vdf+d_t_diss,d_q_vdf,dql0,dqi0,paprs,&
[2799]	2753	'vdf',abortphy,flag_inhib_tend,itap)
[2469]	2754	ELSE
	2755	CALL add_phys_tend &
	2756	(d_u_vdf,d_v_vdf,d_t_vdf+d_t_diss,d_q_vdf,dql0,dqi0,paprs,&
[2812]	2757	'vdf',abortphy,flag_inhib_tend,itap,0)
[2469]	2758	ENDIF
[3461]	2759	CALL prt_enerbil('vdf',itap)
[2469]	2760	!--------------------------------------------------------------------
[766]	2761
[2692]	2762	IF (mydebug) THEN
	2763	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	2764	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	2765	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	2766	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	2767	ENDIF
[2227]	2768
[2469]	2769	!albedo SB >>>
	2770	albsol1=0.
	2771	albsol2=0.
	2772	falb1=0.
	2773	falb2=0.
[2692]	2774	SELECT CASE(nsw)
	2775	CASE(2)
[2469]	2776	albsol1=albsol_dir(:,1)
	2777	albsol2=albsol_dir(:,2)
	2778	falb1=falb_dir(:,1,:)
	2779	falb2=falb_dir(:,2,:)
[2692]	2780	CASE(4)
[2469]	2781	albsol1=albsol_dir(:,1)
	2782	albsol2=albsol_dir(:,2)SFRWL(2)+albsol_dir(:,3)SFRWL(3) &
	2783	+albsol_dir(:,4)*SFRWL(4)
	2784	albsol2=albsol2/(SFRWL(2)+SFRWL(3)+SFRWL(4))
	2785	falb1=falb_dir(:,1,:)
	2786	falb2=falb_dir(:,2,:)SFRWL(2)+falb_dir(:,3,:)SFRWL(3) &
	2787	+falb_dir(:,4,:)*SFRWL(4)
	2788	falb2=falb2/(SFRWL(2)+SFRWL(3)+SFRWL(4))
[2692]	2789	CASE(6)
[2469]	2790	albsol1=albsol_dir(:,1)SFRWL(1)+albsol_dir(:,2)SFRWL(2) &
	2791	+albsol_dir(:,3)*SFRWL(3)
	2792	albsol1=albsol1/(SFRWL(1)+SFRWL(2)+SFRWL(3))
	2793	albsol2=albsol_dir(:,4)SFRWL(4)+albsol_dir(:,5)SFRWL(5) &
	2794	+albsol_dir(:,6)*SFRWL(6)
	2795	albsol2=albsol2/(SFRWL(4)+SFRWL(5)+SFRWL(6))
	2796	falb1=falb_dir(:,1,:)SFRWL(1)+falb_dir(:,2,:)SFRWL(2) &
	2797	+falb_dir(:,3,:)*SFRWL(3)
	2798	falb1=falb1/(SFRWL(1)+SFRWL(2)+SFRWL(3))
	2799	falb2=falb_dir(:,4,:)SFRWL(4)+falb_dir(:,5,:)SFRWL(5) &
	2800	+falb_dir(:,6,:)*SFRWL(6)
	2801	falb2=falb2/(SFRWL(4)+SFRWL(5)+SFRWL(6))
[2692]	2802	END SELECt
[2469]	2803	!albedo SB <<<
[2227]	2804
[766]	2805
[2469]	2806	CALL evappot(klon,nbsrf,ftsol,pplay(:,1),cdragh, &
	2807	t_seri(:,1),q_seri(:,1),u_seri(:,1),v_seri(:,1),evap_pot)
[1724]	2808
[2469]	2809	ENDIF
	2810	! =================================================================== c
	2811	! Calcul de Qsat
[881]	2812
[2469]	2813	DO k = 1, klev
	2814	DO i = 1, klon
	2815	zx_t = t_seri(i,k)
	2816	IF (thermcep) THEN
	2817	zdelta = MAX(0.,SIGN(1.,rtt-zx_t))
	2818	zx_qs = r2es * FOEEW(zx_t,zdelta)/pplay(i,k)
	2819	zx_qs = MIN(0.5,zx_qs)
	2820	zcor = 1./(1.-retv*zx_qs)
	2821	zx_qs = zx_qs*zcor
	2822	ELSE
	2823	!! IF (zx_t.LT.t_coup) THEN !jyg
	2824	IF (zx_t.LT.rtt) THEN !jyg
	2825	zx_qs = qsats(zx_t)/pplay(i,k)
	2826	ELSE
	2827	zx_qs = qsatl(zx_t)/pplay(i,k)
	2828	ENDIF
	2829	ENDIF
	2830	zqsat(i,k)=zx_qs
	2831	ENDDO
	2832	ENDDO
[959]	2833
[2692]	2834	IF (prt_level.ge.1) THEN
[2469]	2835	write(lunout,*) 'L qsat (g/kg) avant clouds_gno'
	2836	write(lunout,'(i4,f15.4)') (k,1000.*zqsat(igout,k),k=1,klev)
[2692]	2837	ENDIF
[2469]	2838	!
	2839	! Appeler la convection (au choix)
	2840	!
	2841	DO k = 1, klev
	2842	DO i = 1, klon
	2843	conv_q(i,k) = d_q_dyn(i,k) &
[3435]	2844	+ d_q_vdf(i,k)/phys_tstep
[2469]	2845	conv_t(i,k) = d_t_dyn(i,k) &
[3435]	2846	+ d_t_vdf(i,k)/phys_tstep
[2469]	2847	ENDDO
	2848	ENDDO
	2849	IF (check) THEN
	2850	za = qcheck(klon,klev,paprs,q_seri,ql_seri,cell_area)
	2851	WRITE(lunout,*) "avantcon=", za
	2852	ENDIF
	2853	zx_ajustq = .FALSE.
	2854	IF (iflag_con.EQ.2) zx_ajustq=.TRUE.
	2855	IF (zx_ajustq) THEN
	2856	DO i = 1, klon
	2857	z_avant(i) = 0.0
	2858	ENDDO
	2859	DO k = 1, klev
	2860	DO i = 1, klon
	2861	z_avant(i) = z_avant(i) + (q_seri(i,k)+ql_seri(i,k)) &
	2862	*(paprs(i,k)-paprs(i,k+1))/RG
	2863	ENDDO
	2864	ENDDO
	2865	ENDIF
[959]	2866
[2469]	2867	! Calcule de vitesse verticale a partir de flux de masse verticale
	2868	DO k = 1, klev
	2869	DO i = 1, klon
	2870	omega(i,k) = RG*flxmass_w(i,k) / cell_area(i)
[2692]	2871	ENDDO
	2872	ENDDO
	2873
	2874	IF (prt_level.ge.1) write(lunout,*) 'omega(igout, :) = ', &
[2469]	2875	omega(igout, :)
[2707]	2876	!
	2877	! Appel de la convection tous les "cvpas"
	2878	!
[3150]	2879	!!jyg IF (MOD(itapcv,cvpas).EQ.0) THEN
[3151]	2880	!! print *,' physiq : itapcv, cvpas, itap-1, cvpas_0 ', &
	2881	!! itapcv, cvpas, itap-1, cvpas_0
[3150]	2882	IF (MOD(itapcv,cvpas).EQ.0 .OR. MOD(itap-1,cvpas_0).EQ.0) THEN
[2707]	2883
[3134]	2884	!
	2885	! Mettre a zero des variables de sortie (pour securite)
	2886	!
	2887	pmflxr(:,:) = 0.
	2888	pmflxs(:,:) = 0.
	2889	wdtrainA(:,:) = 0.
[3496]	2890	wdtrainS(:,:) = 0.
[3134]	2891	wdtrainM(:,:) = 0.
	2892	upwd(:,:) = 0.
	2893	dnwd(:,:) = 0.
	2894	ep(:,:) = 0.
	2895	da(:,:)=0.
	2896	mp(:,:)=0.
	2897	wght_cvfd(:,:)=0.
	2898	phi(:,:,:)=0.
	2899	phi2(:,:,:)=0.
	2900	epmlmMm(:,:,:)=0.
	2901	eplaMm(:,:)=0.
	2902	d1a(:,:)=0.
	2903	dam(:,:)=0.
	2904	elij(:,:,:)=0.
	2905	ev(:,:)=0.
[3496]	2906	qtaa(:,:)=0.
[3134]	2907	clw(:,:)=0.
	2908	sij(:,:,:)=0.
	2909	!
[2469]	2910	IF (iflag_con.EQ.1) THEN
	2911	abort_message ='reactiver le call conlmd dans physiq.F'
	2912	CALL abort_physic (modname,abort_message,1)
[3435]	2913	! CALL conlmd (phys_tstep, paprs, pplay, t_seri, q_seri, conv_q,
[2469]	2914	! . d_t_con, d_q_con,
	2915	! . rain_con, snow_con, ibas_con, itop_con)
	2916	ELSE IF (iflag_con.EQ.2) THEN
[3435]	2917	CALL conflx(phys_tstep, paprs, pplay, t_seri, q_seri, &
[2469]	2918	conv_t, conv_q, -evap, omega, &
	2919	d_t_con, d_q_con, rain_con, snow_con, &
	2920	pmfu, pmfd, pen_u, pde_u, pen_d, pde_d, &
	2921	kcbot, kctop, kdtop, pmflxr, pmflxs)
	2922	d_u_con = 0.
	2923	d_v_con = 0.
[879]	2924
[2469]	2925	WHERE (rain_con < 0.) rain_con = 0.
	2926	WHERE (snow_con < 0.) snow_con = 0.
	2927	DO i = 1, klon
	2928	ibas_con(i) = klev+1 - kcbot(i)
	2929	itop_con(i) = klev+1 - kctop(i)
	2930	ENDDO
	2931	ELSE IF (iflag_con.GE.3) THEN
	2932	! nb of tracers for the KE convection:
	2933	! MAF la partie traceurs est faite dans phytrac
	2934	! on met ntra=1 pour limiter les appels mais on peut
	2935	! supprimer les calculs / ftra.
	2936	ntra = 1
	2937
	2938	!=======================================================================
	2939	!ajout pour la parametrisation des poches froides: calcul de
[2635]	2940	!t_w et t_x: si pas de poches froides, t_w=t_x=t_seri
[2692]	2941	IF (iflag_wake>=1) THEN
	2942	DO k=1,klev
	2943	DO i=1,klon
	2944	t_w(i,k) = t_seri(i,k) + (1-wake_s(i))*wake_deltat(i,k)
	2945	q_w(i,k) = q_seri(i,k) + (1-wake_s(i))*wake_deltaq(i,k)
	2946	t_x(i,k) = t_seri(i,k) - wake_s(i)*wake_deltat(i,k)
	2947	q_x(i,k) = q_seri(i,k) - wake_s(i)*wake_deltaq(i,k)
	2948	ENDDO
	2949	ENDDO
	2950	ELSE
[4056]	2951	t_w(:,:) = t_seri(:,:)
[2635]	2952	q_w(:,:) = q_seri(:,:)
	2953	t_x(:,:) = t_seri(:,:)
	2954	q_x(:,:) = q_seri(:,:)
[2692]	2955	ENDIF
[2469]	2956	!
	2957	!jyg<
	2958	! Perform dry adiabatic adjustment on wake profile
	2959	! The corresponding tendencies are added to the convective tendencies
	2960	! after the call to the convective scheme.
	2961	IF (iflag_wake>=1) then
[2882]	2962	IF (iflag_adjwk >= 1) THEN
[2469]	2963	limbas(:) = 1
[2635]	2964	CALL ajsec(paprs, pplay, t_w, q_w, limbas, &
[2309]	2965	d_t_adjwk, d_q_adjwk)
[2638]	2966	!
	2967	DO k=1,klev
	2968	DO i=1,klon
	2969	IF (wake_s(i) .GT. 1.e-3) THEN
	2970	t_w(i,k) = t_w(i,k) + d_t_adjwk(i,k)
	2971	q_w(i,k) = q_w(i,k) + d_q_adjwk(i,k)
	2972	d_deltat_ajs_cv(i,k) = d_t_adjwk(i,k)
	2973	d_deltaq_ajs_cv(i,k) = d_q_adjwk(i,k)
	2974	ELSE
	2975	d_deltat_ajs_cv(i,k) = 0.
	2976	d_deltaq_ajs_cv(i,k) = 0.
	2977	ENDIF
	2978	ENDDO
[2469]	2979	ENDDO
[2882]	2980	IF (iflag_adjwk == 2) THEN
	2981	CALL add_wake_tend &
[3208]	2982	(d_deltat_ajs_cv, d_deltaq_ajs_cv, dsig0, ddens0, ddens0, wkoccur1, 'ajs_cv', abortphy)
[2882]	2983	ENDIF ! (iflag_adjwk == 2)
	2984	ENDIF ! (iflag_adjwk >= 1)
[2469]	2985	ENDIF ! (iflag_wake>=1)
	2986	!>jyg
	2987	!
[2638]	2988
	2989	!! print *,'physiq. q_w(1,k), q_x(1,k) ', &
	2990	!! (k, q_w(1,k), q_x(1,k),k=1,25)
	2991
[2513]	2992	!jyg<
[3435]	2993	CALL alpale( debut, itap, phys_tstep, paprs, omega, t_seri, &
[2513]	2994	alp_offset, it_wape_prescr, wape_prescr, fip_prescr, &
	2995	ale_bl_prescr, alp_bl_prescr, &
	2996	wake_pe, wake_fip, &
	2997	Ale_bl, Ale_bl_trig, Alp_bl, &
[2554]	2998	Ale, Alp , Ale_wake, Alp_wake)
[2513]	2999	!>jyg
	3000	!
[2469]	3001	! sb, oct02:
	3002	! Schema de convection modularise et vectorise:
	3003	! (driver commun aux versions 3 et 4)
	3004	!
	3005	IF (ok_cvl) THEN ! new driver for convectL
	3006	!
	3007	!jyg<
	3008	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	3009	! Calculate the upmost level of deep convection loops: k_upper_cv
	3010	! (near 22 km)
	3011	k_upper_cv = klev
[3199]	3012	!izero = klon/2+1/klon
	3013	!DO k = klev,1,-1
	3014	! IF (pphi(izero,k) > 22.e4) k_upper_cv = k
	3015	!ENDDO
	3016	! FH : nouveau calcul base sur un profil global sans quoi
	3017	! le modele etait sensible au decoupage de domaines
[2469]	3018	DO k = klev,1,-1
[3199]	3019	IF (-7*log(presnivs(k)/presnivs(1)) > 25.) k_upper_cv = k
[2469]	3020	ENDDO
	3021	IF (prt_level .ge. 5) THEN
	3022	Print *, 'upmost level of deep convection loops: k_upper_cv = ', &
	3023	k_upper_cv
	3024	ENDIF
	3025	!
	3026	!>jyg
[4389]	3027	IF (type_trac == 'repr') THEN
[2469]	3028	nbtr_tmp=ntra
	3029	ELSE
	3030	nbtr_tmp=nbtr
[2692]	3031	ENDIF
[2469]	3032	!jyg iflag_con est dans clesphys
	3033	!c CALL concvl (iflag_con,iflag_clos,
	3034	CALL concvl (iflag_clos, &
[3435]	3035	phys_tstep, paprs, pplay, k_upper_cv, t_x,q_x, &
[2635]	3036	t_w,q_w,wake_s, &
[2469]	3037	u_seri,v_seri,tr_seri,nbtr_tmp, &
	3038	ALE,ALP, &
	3039	sig1,w01, &
	3040	d_t_con,d_q_con,d_u_con,d_v_con,d_tr, &
	3041	rain_con, snow_con, ibas_con, itop_con, sigd, &
[2824]	3042	ema_cbmf,plcl,plfc,wbeff,convoccur,upwd,dnwd,dnwd0, &
[3496]	3043	Ma,mipsh,Vprecip,cape,cin,tvp,Tconv,iflagctrl, &
[2469]	3044	pbase,bbase,dtvpdt1,dtvpdq1,dplcldt,dplcldr,qcondc,wd, &
	3045	! RomP >>>
	3046	!! . pmflxr,pmflxs,da,phi,mp,
	3047	!! . ftd,fqd,lalim_conv,wght_th)
[3496]	3048	pmflxr,pmflxs,da,phi,mp,phi2,d1a,dam,sij,qtaa,clw,elij, &
[2469]	3049	ftd,fqd,lalim_conv,wght_th, &
	3050	ev, ep,epmlmMm,eplaMm, &
[3496]	3051	wdtrainA, wdtrainS, wdtrainM,wght_cvfd,qtc_cv,sigt_cv, &
[2481]	3052	tau_cld_cv,coefw_cld_cv,epmax_diag)
[2630]	3053
[2469]	3054	! RomP <<<
[619]	3055
[2469]	3056	!IM begin
	3057	! print*,'physiq: cin pbase dnwd0 ftd fqd ',cin(1),pbase(1),
	3058	! .dnwd0(1,1),ftd(1,1),fqd(1,1)
	3059	!IM end
	3060	!IM cf. FH
	3061	clwcon0=qcondc
	3062	pmfu(:,:)=upwd(:,:)+dnwd(:,:)
[3150]	3063	!
	3064	!jyg<
	3065	! If convective tendencies are too large, then call convection
	3066	! every time step
	3067	cvpas = cvpas_0
	3068	DO k=1,k_upper_cv
	3069	DO i=1,klon
[3161]	3070	IF (d_t_con(i,k) > 6.721 .AND. d_t_con(i,k) < 6.722 .AND.&
	3071	d_q_con(i,k) > -.0002171 .AND. d_q_con(i,k) < -.0002170) THEN
	3072	dtcon_multistep_max = 3.
	3073	dqcon_multistep_max = 0.02
	3074	ENDIF
	3075	ENDDO
	3076	ENDDO
	3077	!
	3078	DO k=1,k_upper_cv
	3079	DO i=1,klon
[3150]	3080	!! IF (abs(d_t_con(i,k)) > 0.24 .OR. &
	3081	!! abs(d_q_con(i,k)) > 2.e-2) THEN
	3082	IF (abs(d_t_con(i,k)) > dtcon_multistep_max .OR. &
	3083	abs(d_q_con(i,k)) > dqcon_multistep_max) THEN
	3084	cvpas = 1
	3085	!! print *,'physiq1, i,k,d_t_con(i,k),d_q_con(i,k) ', &
	3086	!! i,k,d_t_con(i,k),d_q_con(i,k)
	3087	ENDIF
	3088	ENDDO
	3089	ENDDO
[3153]	3090	!!! Ligne a ne surtout pas remettre sans avoir murement reflechi (jyg)
	3091	!!! call bcast(cvpas)
	3092	!!! ------------------------------------------------------------
[3150]	3093	!>jyg
	3094	!
[2692]	3095	DO i = 1, klon
[3148]	3096	IF (iflagctrl(i).le.1) itau_con(i)=itau_con(i)+cvpas
[2692]	3097	ENDDO
[2469]	3098	!
	3099	!jyg<
	3100	! Add the tendency due to the dry adjustment of the wake profile
	3101	IF (iflag_wake>=1) THEN
[2882]	3102	IF (iflag_adjwk == 2) THEN
	3103	DO k=1,klev
	3104	DO i=1,klon
[3435]	3105	ftd(i,k) = ftd(i,k) + wake_s(i)*d_t_adjwk(i,k)/phys_tstep
	3106	fqd(i,k) = fqd(i,k) + wake_s(i)*d_q_adjwk(i,k)/phys_tstep
[2882]	3107	d_t_con(i,k) = d_t_con(i,k) + wake_s(i)*d_t_adjwk(i,k)
	3108	d_q_con(i,k) = d_q_con(i,k) + wake_s(i)*d_q_adjwk(i,k)
	3109	ENDDO
	3110	ENDDO
	3111	ENDIF ! (iflag_adjwk = 2)
	3112	ENDIF ! (iflag_wake>=1)
[2469]	3113	!>jyg
	3114	!
	3115	ELSE ! ok_cvl
[1412]	3116
[2469]	3117	! MAF conema3 ne contient pas les traceurs
[3435]	3118	CALL conema3 (phys_tstep, &
[2469]	3119	paprs,pplay,t_seri,q_seri, &
	3120	u_seri,v_seri,tr_seri,ntra, &
	3121	sig1,w01, &
	3122	d_t_con,d_q_con,d_u_con,d_v_con,d_tr, &
	3123	rain_con, snow_con, ibas_con, itop_con, &
	3124	upwd,dnwd,dnwd0,bas,top, &
	3125	Ma,cape,tvp,rflag, &
	3126	pbase &
	3127	,bbase,dtvpdt1,dtvpdq1,dplcldt,dplcldr &
	3128	,clwcon0)
[524]	3129
[2469]	3130	ENDIF ! ok_cvl
[524]	3131
[2469]	3132	!
	3133	! Correction precip
	3134	rain_con = rain_con * cvl_corr
	3135	snow_con = snow_con * cvl_corr
	3136	!
[766]	3137
[2469]	3138	IF (.NOT. ok_gust) THEN
	3139	do i = 1, klon
	3140	wd(i)=0.0
	3141	enddo
	3142	ENDIF
[524]	3143
[2469]	3144	! =================================================================== c
	3145	! Calcul des proprietes des nuages convectifs
	3146	!
[524]	3147
[2469]	3148	! calcul des proprietes des nuages convectifs
	3149	clwcon0(:,:)=fact_cldcon*clwcon0(:,:)
	3150	IF (iflag_cld_cv == 0) THEN
[2692]	3151	CALL clouds_gno &
[2469]	3152	(klon,klev,q_seri,zqsat,clwcon0,ptconv,ratqsc,rnebcon0)
	3153	ELSE
[2692]	3154	CALL clouds_bigauss &
[2469]	3155	(klon,klev,q_seri,zqsat,qtc_cv,sigt_cv,ptconv,ratqsc,rnebcon0)
	3156	ENDIF
[524]	3157
[2205]	3158
[2469]	3159	! =================================================================== c
[524]	3160
[2469]	3161	DO i = 1, klon
	3162	itop_con(i) = min(max(itop_con(i),1),klev)
	3163	ibas_con(i) = min(max(ibas_con(i),1),itop_con(i))
	3164	ENDDO
[1428]	3165
[2469]	3166	DO i = 1, klon
[4056]	3167	! C Risi modif: pour éviter pb de dépassement d'indice dans les cas
	3168	! où i n'est pas un point convectif et donc ibas_con(i)=0
	3169	! c'est un pb indépendant des isotopes
	3170	if (ibas_con(i) > 0) then
	3171	ema_pcb(i) = paprs(i,ibas_con(i))
	3172	else
	3173	ema_pcb(i) = 0.0
	3174	endif
[2469]	3175	ENDDO
	3176	DO i = 1, klon
	3177	! L'idicage de itop_con peut cacher un pb potentiel
	3178	! FH sous la dictee de JYG, CR
	3179	ema_pct(i) = paprs(i,itop_con(i)+1)
[879]	3180
[2692]	3181	IF (itop_con(i).gt.klev-3) THEN
	3182	IF (prt_level >= 9) THEN
[2469]	3183	write(lunout,*)'La convection monte trop haut '
	3184	write(lunout,*)'itop_con(,',i,',)=',itop_con(i)
[2692]	3185	ENDIF
	3186	ENDIF
[2469]	3187	ENDDO
	3188	ELSE IF (iflag_con.eq.0) THEN
	3189	write(lunout,*) 'On n appelle pas la convection'
	3190	clwcon0=0.
	3191	rnebcon0=0.
	3192	d_t_con=0.
	3193	d_q_con=0.
	3194	d_u_con=0.
	3195	d_v_con=0.
	3196	rain_con=0.
	3197	snow_con=0.
	3198	bas=1
	3199	top=1
	3200	ELSE
	3201	WRITE(lunout,*) "iflag_con non-prevu", iflag_con
[2692]	3202	CALL abort_physic("physiq", "", 1)
[2469]	3203	ENDIF
[524]	3204
[2469]	3205	! CALL homogene(paprs, q_seri, d_q_con, u_seri,v_seri,
	3206	! . d_u_con, d_v_con)
[524]	3207
[2730]	3208	!jyg Reinitialize proba_notrig and itapcv when convection has been called
	3209	proba_notrig(:) = 1.
[2707]	3210	itapcv = 0
[3150]	3211	ENDIF ! (MOD(itapcv,cvpas).EQ.0 .OR. MOD(itapcv,cvpas_0).EQ.0)
[2730]	3212	!
[2707]	3213	itapcv = itapcv+1
[3153]	3214	!
	3215	! Compter les steps ou cvpas=1
	3216	IF (cvpas == 1) THEN
	3217	Ncvpaseq1 = Ncvpaseq1+1
	3218	ENDIF
	3219	IF (mod(itap,1000) == 0) THEN
	3220	print *,' physiq, nombre de steps ou cvpas = 1 : ', Ncvpaseq1
	3221	ENDIF
[2707]	3222
[2812]	3223	!!!jyg Appel diagnostique a add_phys_tend pour tester la conservation de
	3224	!!! l'energie dans les courants satures.
	3225	!! d_t_con_sat(:,:) = d_t_con(:,:) - ftd(:,:)*dtime
	3226	!! d_q_con_sat(:,:) = d_q_con(:,:) - fqd(:,:)*dtime
	3227	!! dql_sat(:,:) = (wdtrainA(:,:)+wdtrainM(:,:))*dtime/zmasse(:,:)
	3228	!! CALL add_phys_tend(d_u_con, d_v_con, d_t_con_sat, d_q_con_sat, dql_sat, &
	3229	!! dqi0, paprs, 'convection_sat', abortphy, flag_inhib_tend,&
	3230	!! itap, 1)
	3231	!! call prt_enerbil('convection_sat',itap)
	3232	!!
	3233	!!
[2469]	3234	CALL add_phys_tend(d_u_con, d_v_con, d_t_con, d_q_con, dql0, dqi0, paprs, &
[2812]	3235	'convection',abortphy,flag_inhib_tend,itap,0)
[3461]	3236	CALL prt_enerbil('convection',itap)
[2235]	3237
[2469]	3238	!-------------------------------------------------------------------------
[766]	3239
[2692]	3240	IF (mydebug) THEN
	3241	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	3242	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	3243	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	3244	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	3245	ENDIF
[766]	3246
[2469]	3247	IF (check) THEN
	3248	za = qcheck(klon,klev,paprs,q_seri,ql_seri,cell_area)
	3249	WRITE(lunout,*)"aprescon=", za
	3250	zx_t = 0.0
	3251	za = 0.0
	3252	DO i = 1, klon
	3253	za = za + cell_area(i)/REAL(klon)
	3254	zx_t = zx_t + (rain_con(i)+ &
	3255	snow_con(i))*cell_area(i)/REAL(klon)
	3256	ENDDO
[3435]	3257	zx_t = zx_t/za*phys_tstep
[2469]	3258	WRITE(lunout,*)"Precip=", zx_t
	3259	ENDIF
	3260	IF (zx_ajustq) THEN
	3261	DO i = 1, klon
	3262	z_apres(i) = 0.0
	3263	ENDDO
	3264	DO k = 1, klev
	3265	DO i = 1, klon
	3266	z_apres(i) = z_apres(i) + (q_seri(i,k)+ql_seri(i,k)) &
	3267	*(paprs(i,k)-paprs(i,k+1))/RG
	3268	ENDDO
	3269	ENDDO
	3270	DO i = 1, klon
[3435]	3271	z_factor(i) = (z_avant(i)-(rain_con(i)+snow_con(i))*phys_tstep) &
[2469]	3272	/z_apres(i)
	3273	ENDDO
	3274	DO k = 1, klev
	3275	DO i = 1, klon
	3276	IF (z_factor(i).GT.(1.0+1.0E-08) .OR. &
	3277	z_factor(i).LT.(1.0-1.0E-08)) THEN
	3278	q_seri(i,k) = q_seri(i,k) * z_factor(i)
	3279	ENDIF
	3280	ENDDO
	3281	ENDDO
	3282	ENDIF
	3283	zx_ajustq=.FALSE.
[879]	3284
[2469]	3285	!
	3286	!==========================================================================
	3287	!RR:Evolution de la poche froide: on ne fait pas de separation wake/env
	3288	!pour la couche limite diffuse pour l instant
	3289	!
	3290	!
	3291	! nrlmd le 22/03/2011---Si on met les poches hors des thermiques
	3292	! il faut rajouter cette tendance calcul\'ee hors des poches
	3293	! froides
	3294	!
[2692]	3295	IF (iflag_wake>=1) THEN
[2707]	3296	!
	3297	!
[2730]	3298	! Call wakes every "wkpas" step
	3299	!
	3300	IF (MOD(itapwk,wkpas).EQ.0) THEN
	3301	!
	3302	DO k=1,klev
[2469]	3303	DO i=1,klon
[2730]	3304	dt_dwn(i,k) = ftd(i,k)
	3305	dq_dwn(i,k) = fqd(i,k)
	3306	M_dwn(i,k) = dnwd0(i,k)
	3307	M_up(i,k) = upwd(i,k)
[3435]	3308	dt_a(i,k) = d_t_con(i,k)/phys_tstep - ftd(i,k)
	3309	dq_a(i,k) = d_q_con(i,k)/phys_tstep - fqd(i,k)
[2469]	3310	ENDDO
	3311	ENDDO
[2730]	3312
	3313	IF (iflag_wake==2) THEN
	3314	ok_wk_lsp(:)=max(sign(1.,wake_s(:)-wake_s_min_lsp),0.)
	3315	DO k = 1,klev
	3316	dt_dwn(:,k)= dt_dwn(:,k)+ &
[3435]	3317	ok_wk_lsp(:)*(d_t_eva(:,k)+d_t_lsc(:,k))/phys_tstep
[2730]	3318	dq_dwn(:,k)= dq_dwn(:,k)+ &
[3435]	3319	ok_wk_lsp(:)*(d_q_eva(:,k)+d_q_lsc(:,k))/phys_tstep
[2730]	3320	ENDDO
	3321	ELSEIF (iflag_wake==3) THEN
	3322	ok_wk_lsp(:)=max(sign(1.,wake_s(:)-wake_s_min_lsp),0.)
	3323	DO k = 1,klev
	3324	DO i=1,klon
	3325	IF (rneb(i,k)==0.) THEN
	3326	! On ne tient compte des tendances qu'en dehors des
	3327	! nuages (c'est-\`a-dire a priri dans une region ou
	3328	! l'eau se reevapore).
	3329	dt_dwn(i,k)= dt_dwn(i,k)+ &
[3435]	3330	ok_wk_lsp(i)*d_t_lsc(i,k)/phys_tstep
[2730]	3331	dq_dwn(i,k)= dq_dwn(i,k)+ &
[3435]	3332	ok_wk_lsp(i)*d_q_lsc(i,k)/phys_tstep
[2730]	3333	ENDIF
	3334	ENDDO
	3335	ENDDO
	3336	ENDIF
	3337
	3338	!
	3339	!calcul caracteristiques de la poche froide
[3435]	3340	CALL calWAKE (iflag_wake_tend, paprs, pplay, phys_tstep, &
[2730]	3341	t_seri, q_seri, omega, &
	3342	dt_dwn, dq_dwn, M_dwn, M_up, &
[3208]	3343	dt_a, dq_a, cv_gen, &
	3344	sigd, cin, &
	3345	wake_deltat, wake_deltaq, wake_s, awake_dens, wake_dens, &
[2730]	3346	wake_dth, wake_h, &
[3000]	3347	!! wake_pe, wake_fip, wake_gfl, &
	3348	wake_pe, wake_fip_0, wake_gfl, & !! jyg
[2730]	3349	d_t_wake, d_q_wake, &
	3350	wake_k, t_x, q_x, &
	3351	wake_omgbdth, wake_dp_omgb, &
	3352	wake_dtKE, wake_dqKE, &
	3353	wake_omg, wake_dp_deltomg, &
	3354	wake_spread, wake_Cstar, d_deltat_wk_gw, &
[3208]	3355	d_deltat_wk, d_deltaq_wk, d_s_wk, d_dens_a_wk, d_dens_wk)
[2730]	3356	!
	3357	!jyg Reinitialize itapwk when wakes have been called
	3358	itapwk = 0
	3359	ENDIF ! (MOD(itapwk,wkpas).EQ.0)
[2469]	3360	!
[2730]	3361	itapwk = itapwk+1
[2469]	3362	!
	3363	!-----------------------------------------------------------------------
	3364	! ajout des tendances des poches froides
	3365	CALL add_phys_tend(du0,dv0,d_t_wake,d_q_wake,dql0,dqi0,paprs,'wake', &
[2812]	3366	abortphy,flag_inhib_tend,itap,0)
[3461]	3367	CALL prt_enerbil('wake',itap)
[2469]	3368	!------------------------------------------------------------------------
[879]	3369
[2730]	3370	! Increment Wake state variables
[2635]	3371	IF (iflag_wake_tend .GT. 0.) THEN
	3372
	3373	CALL add_wake_tend &
[3208]	3374	(d_deltat_wk, d_deltaq_wk, d_s_wk, d_dens_a_wk, d_dens_wk, wake_k, &
[2635]	3375	'wake', abortphy)
[3461]	3376	CALL prt_enerbil('wake',itap)
[2635]	3377	ENDIF ! (iflag_wake_tend .GT. 0.)
[3179]	3378	!
	3379	IF (prt_level .GE. 10) THEN
	3380	print *,' physiq, after calwake, wake_s: ',wake_s(:)
	3381	print *,' physiq, after calwake, wake_deltat: ',wake_deltat(:,1)
	3382	print *,' physiq, after calwake, wake_deltaq: ',wake_deltaq(:,1)
	3383	ENDIF
[2635]	3384
[3000]	3385	IF (iflag_alp_wk_cond .GT. 0.) THEN
	3386
[3435]	3387	CALL alpale_wk(phys_tstep, cell_area, wake_k, wake_s, wake_dens, wake_fip_0, &
[3000]	3388	wake_fip)
	3389	ELSE
	3390	wake_fip(:) = wake_fip_0(:)
	3391	ENDIF ! (iflag_alp_wk_cond .GT. 0.)
	3392
[2692]	3393	ENDIF ! (iflag_wake>=1)
[2469]	3394	!
	3395	!===================================================================
	3396	! Convection seche (thermiques ou ajustement)
	3397	!===================================================================
	3398	!
[2692]	3399	CALL stratocu_if(klon,klev,pctsrf,paprs, pplay,t_seri &
[2469]	3400	,seuil_inversion,weak_inversion,dthmin)
[878]	3401
	3402
	3403
[2469]	3404	d_t_ajsb(:,:)=0.
	3405	d_q_ajsb(:,:)=0.
	3406	d_t_ajs(:,:)=0.
	3407	d_u_ajs(:,:)=0.
	3408	d_v_ajs(:,:)=0.
	3409	d_q_ajs(:,:)=0.
	3410	clwcon0th(:,:)=0.
	3411	!
	3412	! fm_therm(:,:)=0.
	3413	! entr_therm(:,:)=0.
	3414	! detr_therm(:,:)=0.
	3415	!
[2692]	3416	IF (prt_level>9) WRITE(lunout,*) &
[2469]	3417	'AVANT LA CONVECTION SECHE , iflag_thermals=' &
	3418	,iflag_thermals,' nsplit_thermals=',nsplit_thermals
[2692]	3419	IF (iflag_thermals<0) THEN
[2469]	3420	! Rien
	3421	! ====
[2692]	3422	IF (prt_level>9) WRITE(lunout,*)'pas de convection seche'
[541]	3423
[878]	3424
[2692]	3425	ELSE
[878]	3426
[2469]	3427	! Thermiques
	3428	! ==========
[2692]	3429	IF (prt_level>9) WRITE(lunout,*)'JUSTE AVANT , iflag_thermals=' &
[2469]	3430	,iflag_thermals,' nsplit_thermals=',nsplit_thermals
[878]	3431
	3432
[2469]	3433	!cc nrlmd le 10/04/2012
	3434	DO k=1,klev+1
	3435	DO i=1,klon
	3436	pbl_tke_input(i,k,is_oce)=pbl_tke(i,k,is_oce)
	3437	pbl_tke_input(i,k,is_ter)=pbl_tke(i,k,is_ter)
	3438	pbl_tke_input(i,k,is_lic)=pbl_tke(i,k,is_lic)
	3439	pbl_tke_input(i,k,is_sic)=pbl_tke(i,k,is_sic)
[2159]	3440	ENDDO
[2469]	3441	ENDDO
	3442	!cc fin nrlmd le 10/04/2012
[1403]	3443
[2692]	3444	IF (iflag_thermals>=1) THEN
[2469]	3445	!jyg<
[2852]	3446	!! IF (mod(iflag_pbl_split/2,2) .EQ. 1) THEN
	3447	IF (mod(iflag_pbl_split/10,10) .GE. 1) THEN
[2469]	3448	! Appel des thermiques avec les profils exterieurs aux poches
	3449	DO k=1,klev
	3450	DO i=1,klon
	3451	t_therm(i,k) = t_seri(i,k) - wake_s(i)*wake_deltat(i,k)
	3452	q_therm(i,k) = q_seri(i,k) - wake_s(i)*wake_deltaq(i,k)
[2606]	3453	u_therm(i,k) = u_seri(i,k)
	3454	v_therm(i,k) = v_seri(i,k)
[2469]	3455	ENDDO
	3456	ENDDO
	3457	ELSE
	3458	! Appel des thermiques avec les profils moyens
	3459	DO k=1,klev
	3460	DO i=1,klon
	3461	t_therm(i,k) = t_seri(i,k)
	3462	q_therm(i,k) = q_seri(i,k)
[2606]	3463	u_therm(i,k) = u_seri(i,k)
	3464	v_therm(i,k) = v_seri(i,k)
[2469]	3465	ENDDO
	3466	ENDDO
	3467	ENDIF
	3468	!>jyg
[2692]	3469	CALL calltherm(pdtphys &
[2469]	3470	,pplay,paprs,pphi,weak_inversion &
[2606]	3471	! ,u_seri,v_seri,t_seri,q_seri,zqsat,debut & !jyg
	3472	,u_therm,v_therm,t_therm,q_therm,zqsat,debut & !jyg
[2469]	3473	,d_u_ajs,d_v_ajs,d_t_ajs,d_q_ajs &
	3474	,fm_therm,entr_therm,detr_therm &
	3475	,zqasc,clwcon0th,lmax_th,ratqscth &
	3476	,ratqsdiff,zqsatth &
	3477	!on rajoute ale et alp, et les
	3478	!caracteristiques de la couche alim
	3479	,Ale_bl,Alp_bl,lalim_conv,wght_th, zmax0, f0, zw2,fraca &
	3480	,ztv,zpspsk,ztla,zthl &
	3481	!cc nrlmd le 10/04/2012
	3482	,pbl_tke_input,pctsrf,omega,cell_area &
	3483	,zlcl_th,fraca0,w0,w_conv,therm_tke_max0,env_tke_max0 &
	3484	,n2,s2,ale_bl_stat &
	3485	,therm_tke_max,env_tke_max &
	3486	,alp_bl_det,alp_bl_fluct_m,alp_bl_fluct_tke &
	3487	,alp_bl_conv,alp_bl_stat &
	3488	!cc fin nrlmd le 10/04/2012
	3489	,zqla,ztva )
	3490	!
	3491	!jyg<
[2852]	3492	!!jyg IF (mod(iflag_pbl_split/2,2) .EQ. 1) THEN
	3493	IF (mod(iflag_pbl_split/10,10) .GE. 1) THEN
[2469]	3494	! Si les thermiques ne sont presents que hors des
	3495	! poches, la tendance moyenne associ\'ee doit etre
	3496	! multipliee par la fraction surfacique qu'ils couvrent.
	3497	DO k=1,klev
	3498	DO i=1,klon
	3499	!
[2635]	3500	d_deltat_the(i,k) = - d_t_ajs(i,k)
	3501	d_deltaq_the(i,k) = - d_q_ajs(i,k)
[2469]	3502	!
	3503	d_u_ajs(i,k) = d_u_ajs(i,k)*(1.-wake_s(i))
	3504	d_v_ajs(i,k) = d_v_ajs(i,k)*(1.-wake_s(i))
	3505	d_t_ajs(i,k) = d_t_ajs(i,k)*(1.-wake_s(i))
	3506	d_q_ajs(i,k) = d_q_ajs(i,k)*(1.-wake_s(i))
	3507	!
	3508	ENDDO
	3509	ENDDO
[2606]	3510	!
[3180]	3511	IF (ok_bug_split_th) THEN
	3512	CALL add_wake_tend &
[3208]	3513	(d_deltat_the, d_deltaq_the, dsig0, ddens0, ddens0, wkoccur1, 'the', abortphy)
[3180]	3514	ELSE
	3515	CALL add_wake_tend &
[3208]	3516	(d_deltat_the, d_deltaq_the, dsig0, ddens0, ddens0, wake_k, 'the', abortphy)
[3180]	3517	ENDIF
[3461]	3518	CALL prt_enerbil('the',itap)
[2638]	3519	!
[2852]	3520	ENDIF ! (mod(iflag_pbl_split/10,10) .GE. 1)
[2638]	3521	!
[2606]	3522	CALL add_phys_tend(d_u_ajs,d_v_ajs,d_t_ajs,d_q_ajs, &
[2812]	3523	dql0,dqi0,paprs,'thermals', abortphy,flag_inhib_tend,itap,0)
[3461]	3524	CALL prt_enerbil('thermals',itap)
[2606]	3525	!
[2513]	3526	!
[3435]	3527	CALL alpale_th( phys_tstep, lmax_th, t_seri, cell_area, &
[2513]	3528	cin, s2, n2, &
	3529	ale_bl_trig, ale_bl_stat, ale_bl, &
[2556]	3530	alp_bl, alp_bl_stat, &
[3208]	3531	proba_notrig, random_notrig, cv_gen)
[2635]	3532	!>jyg
[1638]	3533
[2554]	3534	! ------------------------------------------------------------------
	3535	! Transport de la TKE par les panaches thermiques.
	3536	! FH : 2010/02/01
	3537	! if (iflag_pbl.eq.10) then
	3538	! call thermcell_dtke(klon,klev,nbsrf,pdtphys,fm_therm,entr_therm,
	3539	! s rg,paprs,pbl_tke)
	3540	! endif
	3541	! -------------------------------------------------------------------
	3542
[2692]	3543	DO i=1,klon
[2469]	3544	! zmax_th(i)=pphi(i,lmax_th(i))/rg
	3545	!CR:04/05/12:correction calcul zmax
	3546	zmax_th(i)=zmax0(i)
[2692]	3547	ENDDO
[1507]	3548
[2692]	3549	ENDIF
[878]	3550
[2469]	3551	! Ajustement sec
	3552	! ==============
[878]	3553
[2469]	3554	! Dans le cas o\`u on active les thermiques, on fait partir l'ajustement
	3555	! a partir du sommet des thermiques.
	3556	! Dans le cas contraire, on demarre au niveau 1.
[878]	3557
[2692]	3558	IF (iflag_thermals>=13.or.iflag_thermals<=0) THEN
[878]	3559
[2692]	3560	IF (iflag_thermals.eq.0) THEN
	3561	IF (prt_level>9) WRITE(lunout,*)'ajsec'
[2469]	3562	limbas(:)=1
[2692]	3563	ELSE
[2469]	3564	limbas(:)=lmax_th(:)
[2692]	3565	ENDIF
[878]	3566
[2469]	3567	! Attention : le call ajsec_convV2 n'est maintenu que momentanneement
	3568	! pour des test de convergence numerique.
	3569	! Le nouveau ajsec est a priori mieux, meme pour le cas
	3570	! iflag_thermals = 0 (l'ancienne version peut faire des tendances
	3571	! non nulles numeriquement pour des mailles non concernees.
[878]	3572
[2692]	3573	IF (iflag_thermals==0) THEN
[2469]	3574	! Calling adjustment alone (but not the thermal plume model)
	3575	CALL ajsec_convV2(paprs, pplay, t_seri,q_seri &
	3576	, d_t_ajsb, d_q_ajsb)
[2692]	3577	ELSE IF (iflag_thermals>0) THEN
[2469]	3578	! Calling adjustment above the top of thermal plumes
	3579	CALL ajsec(paprs, pplay, t_seri,q_seri,limbas &
	3580	, d_t_ajsb, d_q_ajsb)
[2692]	3581	ENDIF
[878]	3582
[2469]	3583	!--------------------------------------------------------------------
	3584	! ajout des tendances de l'ajustement sec ou des thermiques
	3585	CALL add_phys_tend(du0,dv0,d_t_ajsb,d_q_ajsb,dql0,dqi0,paprs, &
[2812]	3586	'ajsb',abortphy,flag_inhib_tend,itap,0)
[3461]	3587	CALL prt_enerbil('ajsb',itap)
[2469]	3588	d_t_ajs(:,:)=d_t_ajs(:,:)+d_t_ajsb(:,:)
	3589	d_q_ajs(:,:)=d_q_ajs(:,:)+d_q_ajsb(:,:)
[904]	3590
[2469]	3591	!---------------------------------------------------------------------
[878]	3592
[2692]	3593	ENDIF
[524]	3594
[2692]	3595	ENDIF
[2469]	3596	!
	3597	!===================================================================
	3598	! Computation of ratqs, the width (normalized) of the subrid scale
	3599	! water distribution
[4009]	3600
	3601	tke_dissip_ave(:,:)=0.
	3602	l_mix_ave(:,:)=0.
	3603	wprime_ave(:,:)=0.
	3604
	3605	DO nsrf = 1, nbsrf
	3606	DO i = 1, klon
	3607	tke_dissip_ave(i,:) = tke_dissip_ave(i,:) + tke_dissip(i,:,nsrf)*pctsrf(i,nsrf)
	3608	l_mix_ave(i,:) = l_mix_ave(i,:) + l_mix(i,:,nsrf)*pctsrf(i,nsrf)
	3609	wprime_ave(i,:) = wprime_ave(i,:) + wprime(i,:,nsrf)*pctsrf(i,nsrf)
	3610	ENDDO
	3611	ENDDO
	3612
[2469]	3613	CALL calcratqs(klon,klev,prt_level,lunout, &
	3614	iflag_ratqs,iflag_con,iflag_cld_th,pdtphys, &
[2534]	3615	ratqsbas,ratqshaut,ratqsp0, ratqsdp, &
[3856]	3616	tau_ratqs,fact_cldcon,wake_s, wake_deltaq, &
[2469]	3617	ptconv,ptconvth,clwcon0th, rnebcon0th, &
[4009]	3618	paprs,pplay,t_seri,q_seri, qtc_cv, sigt_cv, zqsat, &
	3619	pbl_tke(:,:,is_ave),tke_dissip_ave,l_mix_ave,wprime_ave,t2m,q2m,fm_therm, &
[3856]	3620	ratqs,ratqsc,ratqs_inter)
[1032]	3621
[2469]	3622	!
	3623	! Appeler le processus de condensation a grande echelle
	3624	! et le processus de precipitation
	3625	!-------------------------------------------------------------------------
	3626	IF (prt_level .GE.10) THEN
	3627	print *,'itap, ->fisrtilp ',itap
	3628	ENDIF
[4056]	3629	!
[3999]	3630
	3631	picefra(:,:)=0.
	3632
	3633	IF (ok_new_lscp) THEN
	3634
[4062]	3635	!--mise à jour de flight_m et flight_h2o dans leur module
	3636	IF (ok_plane_h2o .OR. ok_plane_contrail) THEN
	3637	CALL airplane(debut,pphis,pplay,paprs,t_seri)
	3638	ENDIF
[4059]	3639
[4380]	3640	CALL lscp(klon,klev,phys_tstep,missing_val,paprs,pplay, &
[3999]	3641	t_seri, q_seri,ptconv,ratqs, &
[4380]	3642	d_t_lsc, d_q_lsc, d_ql_lsc, d_qi_lsc, rneb, rneblsvol, rneb_seri, &
[4412]	3643	radocond, picefra, rain_lsc, snow_lsc, &
[3999]	3644	frac_impa, frac_nucl, beta_prec_fisrt, &
	3645	prfl, psfl, rhcl, &
	3646	zqasc, fraca,ztv,zpspsk,ztla,zthl,iflag_cld_th, &
[4380]	3647	iflag_ice_thermo, ok_ice_sursat, zqsatl, zqsats, &
	3648	qclr, qcld, qss, qvc, rnebclr, rnebss, gamma_ss, &
	3649	Tcontr, qcontr, qcontr2, fcontrN, fcontrP )
[3999]	3650
	3651	ELSE
[4059]	3652
[3435]	3653	CALL fisrtilp(phys_tstep,paprs,pplay, &
[2469]	3654	t_seri, q_seri,ptconv,ratqs, &
[4412]	3655	d_t_lsc, d_q_lsc, d_ql_lsc, d_qi_lsc, rneb, radocond, &
[2469]	3656	rain_lsc, snow_lsc, &
	3657	pfrac_impa, pfrac_nucl, pfrac_1nucl, &
	3658	frac_impa, frac_nucl, beta_prec_fisrt, &
	3659	prfl, psfl, rhcl, &
	3660	zqasc, fraca,ztv,zpspsk,ztla,zthl,iflag_cld_th, &
	3661	iflag_ice_thermo)
[4059]	3662
[3999]	3663	ENDIF
[4056]	3664	!
[2469]	3665	WHERE (rain_lsc < 0) rain_lsc = 0.
	3666	WHERE (snow_lsc < 0) snow_lsc = 0.
[766]	3667
[2799]	3668	!+JLD
	3669	! write(*,9000) 'phys lsc',"enerbil: bil_q, bil_e,",rain_lsc+snow_lsc &
	3670	! & ,((rcw-rcpd)rain_lsc + (rcs-rcpd)snow_lsc)t_seri(1,1)-rlvttrain_lsc+rlstt*snow_lsc &
	3671	! & ,rain_lsc,snow_lsc
	3672	! write(*,9000) "rcpv","rcw",rcpv,rcw,rcs,t_seri(1,1)
	3673	!-JLD
[2469]	3674	CALL add_phys_tend(du0,dv0,d_t_lsc,d_q_lsc,d_ql_lsc,d_qi_lsc,paprs, &
[2812]	3675	'lsc',abortphy,flag_inhib_tend,itap,0)
[3461]	3676	CALL prt_enerbil('lsc',itap)
[2613]	3677	rain_num(:)=0.
[2657]	3678	DO k = 1, klev
[2613]	3679	DO i = 1, klon
	3680	IF (ql_seri(i,k)>oliqmax) THEN
	3681	rain_num(i)=rain_num(i)+(ql_seri(i,k)-oliqmax)*zmasse(i,k)/pdtphys
	3682	ql_seri(i,k)=oliqmax
	3683	ENDIF
	3684	ENDDO
	3685	ENDDO
[4098]	3686	IF (nqo >= 3) THEN
[2657]	3687	DO k = 1, klev
	3688	DO i = 1, klon
	3689	IF (qs_seri(i,k)>oicemax) THEN
	3690	rain_num(i)=rain_num(i)+(qs_seri(i,k)-oicemax)*zmasse(i,k)/pdtphys
	3691	qs_seri(i,k)=oicemax
	3692	ENDIF
	3693	ENDDO
	3694	ENDDO
	3695	ENDIF
[2613]	3696
[2524]	3697	!---------------------------------------------------------------------------
[2469]	3698	DO k = 1, klev
	3699	DO i = 1, klon
	3700	cldfra(i,k) = rneb(i,k)
	3701	!CR: a quoi ca sert? Faut-il ajouter qs_seri?
[4412]	3702	IF (.NOT.new_oliq) radocond(i,k) = ql_seri(i,k)
[2469]	3703	ENDDO
	3704	ENDDO
	3705	IF (check) THEN
	3706	za = qcheck(klon,klev,paprs,q_seri,ql_seri,cell_area)
	3707	WRITE(lunout,*)"apresilp=", za
	3708	zx_t = 0.0
	3709	za = 0.0
	3710	DO i = 1, klon
	3711	za = za + cell_area(i)/REAL(klon)
	3712	zx_t = zx_t + (rain_lsc(i) &
	3713	+ snow_lsc(i))*cell_area(i)/REAL(klon)
	3714	ENDDO
[3435]	3715	zx_t = zx_t/za*phys_tstep
[2469]	3716	WRITE(lunout,*)"Precip=", zx_t
	3717	ENDIF
[766]	3718
[2692]	3719	IF (mydebug) THEN
	3720	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	3721	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	3722	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	3723	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	3724	ENDIF
[524]	3725
[2469]	3726	!
	3727	!-------------------------------------------------------------------
	3728	! PRESCRIPTION DES NUAGES POUR LE RAYONNEMENT
	3729	!-------------------------------------------------------------------
[524]	3730
[2469]	3731	! 1. NUAGES CONVECTIFS
	3732	!
	3733	!IM cf FH
	3734	! IF (iflag_cld_th.eq.-1) THEN ! seulement pour Tiedtke
	3735	IF (iflag_cld_th.le.-1) THEN ! seulement pour Tiedtke
	3736	snow_tiedtke=0.
	3737	! print*,'avant calcul de la pseudo precip '
	3738	! print*,'iflag_cld_th',iflag_cld_th
[2692]	3739	IF (iflag_cld_th.eq.-1) THEN
[2469]	3740	rain_tiedtke=rain_con
[2692]	3741	ELSE
[2469]	3742	! print*,'calcul de la pseudo precip '
	3743	rain_tiedtke=0.
	3744	! print*,'calcul de la pseudo precip 0'
[2692]	3745	DO k=1,klev
	3746	DO i=1,klon
	3747	IF (d_q_con(i,k).lt.0.) THEN
[2469]	3748	rain_tiedtke(i)=rain_tiedtke(i)-d_q_con(i,k)/pdtphys &
	3749	*(paprs(i,k)-paprs(i,k+1))/rg
[2692]	3750	ENDIF
	3751	ENDDO
	3752	ENDDO
	3753	ENDIF
[2469]	3754	!
	3755	! call dump2d(iim,jjm,rain_tiedtke(2:klon-1),'PSEUDO PRECIP ')
	3756	!
[524]	3757
[2469]	3758	! Nuages diagnostiques pour Tiedtke
	3759	CALL diagcld1(paprs,pplay, &
	3760	!IM cf FH. rain_con,snow_con,ibas_con,itop_con,
	3761	rain_tiedtke,snow_tiedtke,ibas_con,itop_con, &
	3762	diafra,dialiq)
	3763	DO k = 1, klev
	3764	DO i = 1, klon
	3765	IF (diafra(i,k).GT.cldfra(i,k)) THEN
[4412]	3766	radocond(i,k) = dialiq(i,k)
[2469]	3767	cldfra(i,k) = diafra(i,k)
	3768	ENDIF
	3769	ENDDO
	3770	ENDDO
[524]	3771
[2469]	3772	ELSE IF (iflag_cld_th.ge.3) THEN
	3773	! On prend pour les nuages convectifs le max du calcul de la
	3774	! convection et du calcul du pas de temps precedent diminue d'un facteur
	3775	! facttemps
	3776	facteur = pdtphys *facttemps
[2692]	3777	DO k=1,klev
	3778	DO i=1,klon
[2469]	3779	rnebcon(i,k)=rnebcon(i,k)*facteur
[2692]	3780	IF (rnebcon0(i,k)clwcon0(i,k).GT.rnebcon(i,k)clwcon(i,k)) THEN
[2469]	3781	rnebcon(i,k)=rnebcon0(i,k)
	3782	clwcon(i,k)=clwcon0(i,k)
[2692]	3783	ENDIF
	3784	ENDDO
	3785	ENDDO
[2469]	3786
	3787	! On prend la somme des fractions nuageuses et des contenus en eau
[524]	3788
[2692]	3789	IF (iflag_cld_th>=5) THEN
[1411]	3790
[2692]	3791	DO k=1,klev
[2469]	3792	ptconvth(:,k)=fm_therm(:,k+1)>0.
[2692]	3793	ENDDO
[1496]	3794
[2692]	3795	IF (iflag_coupl==4) THEN
[1496]	3796
[2469]	3797	! Dans le cas iflag_coupl==4, on prend la somme des convertures
	3798	! convectives et lsc dans la partie des thermiques
	3799	! Le controle par iflag_coupl est peut etre provisoire.
[2692]	3800	DO k=1,klev
	3801	DO i=1,klon
	3802	IF (ptconv(i,k).AND.ptconvth(i,k)) THEN
[4412]	3803	radocond(i,k)=radocond(i,k)+rnebcon(i,k)*clwcon(i,k)
[2469]	3804	cldfra(i,k)=min(cldfra(i,k)+rnebcon(i,k),1.)
[2692]	3805	ELSE IF (ptconv(i,k)) THEN
[2469]	3806	cldfra(i,k)=rnebcon(i,k)
[4412]	3807	radocond(i,k)=rnebcon(i,k)*clwcon(i,k)
[2692]	3808	ENDIF
	3809	ENDDO
	3810	ENDDO
[1496]	3811
[2692]	3812	ELSE IF (iflag_coupl==5) THEN
	3813	DO k=1,klev
	3814	DO i=1,klon
[2469]	3815	cldfra(i,k)=min(cldfra(i,k)+rnebcon(i,k),1.)
[4412]	3816	radocond(i,k)=radocond(i,k)+rnebcon(i,k)*clwcon(i,k)
[2692]	3817	ENDDO
	3818	ENDDO
[1525]	3819
[2692]	3820	ELSE
[1525]	3821
[2469]	3822	! Si on est sur un point touche par la convection
	3823	! profonde et pas par les thermiques, on prend la
	3824	! couverture nuageuse et l'eau nuageuse de la convection
	3825	! profonde.
[1411]	3826
[2469]	3827	!IM/FH: 2011/02/23
	3828	! definition des points sur lesquels ls thermiques sont actifs
[1496]	3829
[2692]	3830	DO k=1,klev
	3831	DO i=1,klon
	3832	IF (ptconv(i,k).AND. .NOT.ptconvth(i,k)) THEN
[2469]	3833	cldfra(i,k)=rnebcon(i,k)
[4412]	3834	radocond(i,k)=rnebcon(i,k)*clwcon(i,k)
[2692]	3835	ENDIF
	3836	ENDDO
	3837	ENDDO
[1496]	3838
[2692]	3839	ENDIF
[1496]	3840
[2692]	3841	ELSE
[1496]	3842
[2469]	3843	! Ancienne version
	3844	cldfra(:,:)=min(max(cldfra(:,:),rnebcon(:,:)),1.)
[4412]	3845	radocond(:,:)=radocond(:,:)+rnebcon(:,:)*clwcon(:,:)
[2692]	3846	ENDIF
[1411]	3847
[2469]	3848	ENDIF
[1507]	3849
[2469]	3850	! plulsc(:)=0.
	3851	! do k=1,klev,-1
	3852	! do i=1,klon
	3853	! zzz=prfl(:,k)+psfl(:,k)
	3854	! if (.not.ptconvth.zzz.gt.0.)
	3855	! enddo prfl, psfl,
	3856	! enddo
	3857	!
	3858	! 2. NUAGES STARTIFORMES
	3859	!
	3860	IF (ok_stratus) THEN
	3861	CALL diagcld2(paprs,pplay,t_seri,q_seri, diafra,dialiq)
	3862	DO k = 1, klev
	3863	DO i = 1, klon
	3864	IF (diafra(i,k).GT.cldfra(i,k)) THEN
[4412]	3865	radocond(i,k) = dialiq(i,k)
[2469]	3866	cldfra(i,k) = diafra(i,k)
	3867	ENDIF
	3868	ENDDO
	3869	ENDDO
	3870	ENDIF
	3871	!
	3872	! Precipitation totale
	3873	!
	3874	DO i = 1, klon
	3875	rain_fall(i) = rain_con(i) + rain_lsc(i)
	3876	snow_fall(i) = snow_con(i) + snow_lsc(i)
	3877	ENDDO
	3878	!
	3879	! Calculer l'humidite relative pour diagnostique
	3880	!
	3881	DO k = 1, klev
	3882	DO i = 1, klon
	3883	zx_t = t_seri(i,k)
	3884	IF (thermcep) THEN
	3885	!! if (iflag_ice_thermo.eq.0) then !jyg
	3886	zdelta = MAX(0.,SIGN(1.,rtt-zx_t))
	3887	!! else !jyg
	3888	!! zdelta = MAX(0.,SIGN(1.,t_glace_min-zx_t)) !jyg
	3889	!! endif !jyg
	3890	zx_qs = r2es * FOEEW(zx_t,zdelta)/pplay(i,k)
	3891	zx_qs = MIN(0.5,zx_qs)
	3892	zcor = 1./(1.-retv*zx_qs)
	3893	zx_qs = zx_qs*zcor
	3894	ELSE
	3895	!! IF (zx_t.LT.t_coup) THEN !jyg
	3896	IF (zx_t.LT.rtt) THEN !jyg
	3897	zx_qs = qsats(zx_t)/pplay(i,k)
	3898	ELSE
	3899	zx_qs = qsatl(zx_t)/pplay(i,k)
	3900	ENDIF
	3901	ENDIF
	3902	zx_rh(i,k) = q_seri(i,k)/zx_qs
[3784]	3903	IF (iflag_ice_thermo .GT. 0) THEN
[3780]	3904	zx_rhl(i,k) = q_seri(i,k)/(qsatl(zx_t)/pplay(i,k))
	3905	zx_rhi(i,k) = q_seri(i,k)/(qsats(zx_t)/pplay(i,k))
[3784]	3906	ENDIF
[2469]	3907	zqsat(i,k)=zx_qs
	3908	ENDDO
	3909	ENDDO
[782]	3910
[2469]	3911	!IM Calcul temp.potentielle a 2m (tpot) et temp. potentielle
	3912	! equivalente a 2m (tpote) pour diagnostique
	3913	!
	3914	DO i = 1, klon
	3915	tpot(i)=zt2m(i)(100000./paprs(i,1))*RKAPPA
	3916	IF (thermcep) THEN
	3917	IF(zt2m(i).LT.RTT) then
	3918	Lheat=RLSTT
	3919	ELSE
	3920	Lheat=RLVTT
	3921	ENDIF
	3922	ELSE
	3923	IF (zt2m(i).LT.RTT) THEN
	3924	Lheat=RLSTT
	3925	ELSE
	3926	Lheat=RLVTT
	3927	ENDIF
	3928	ENDIF
	3929	tpote(i) = tpot(i)* &
	3930	EXP((Lheat qsat2m(i))/(RCPDzt2m(i)))
	3931	ENDDO
[524]	3932
[4389]	3933	IF (ANY(type_trac == ['inca','inco'])) THEN ! ModThL
[524]	3934	#ifdef INCA
[2469]	3935	CALL VTe(VTphysiq)
	3936	CALL VTb(VTinca)
	3937	calday = REAL(days_elapsed + 1) + jH_cur
[524]	3938
[3435]	3939	CALL chemtime(itap+itau_phy-1, date0, phys_tstep, itap)
[3563]	3940	CALL AEROSOL_METEO_CALC( &
	3941	calday,pdtphys,pplay,paprs,t,pmflxr,pmflxs, &
	3942	prfl,psfl,pctsrf,cell_area, &
	3943	latitude_deg,longitude_deg,u10m,v10m)
[524]	3944
[2469]	3945	zxsnow_dummy(:) = 0.0
[625]	3946
[2469]	3947	CALL chemhook_begin (calday, &
	3948	days_elapsed+1, &
	3949	jH_cur, &
	3950	pctsrf(1,1), &
	3951	latitude_deg, &
	3952	longitude_deg, &
	3953	cell_area, &
	3954	paprs, &
	3955	pplay, &
	3956	coefh(1:klon,1:klev,is_ave), &
	3957	pphi, &
	3958	t_seri, &
	3959	u, &
	3960	v, &
[3613]	3961	rot, &
[2469]	3962	wo(:, :, 1), &
	3963	q_seri, &
	3964	zxtsol, &
[3613]	3965	zt2m, &
[2469]	3966	zxsnow_dummy, &
	3967	solsw, &
	3968	albsol1, &
	3969	rain_fall, &
	3970	snow_fall, &
	3971	itop_con, &
	3972	ibas_con, &
	3973	cldfra, &
	3974	nbp_lon, &
	3975	nbp_lat-1, &
[3872]	3976	tr_seri(:,:,1+nqCO2:nbtr), &
[2469]	3977	ftsol, &
	3978	paprs, &
	3979	cdragh, &
	3980	cdragm, &
	3981	pctsrf, &
	3982	pdtphys, &
	3983	itap)
[616]	3984
[2469]	3985	CALL VTe(VTinca)
	3986	CALL VTb(VTphysiq)
[3865]	3987	#endif
	3988	ENDIF !type_trac = inca or inco
[4389]	3989	IF (type_trac == 'repr') THEN
[3666]	3990	#ifdef REPROBUS
	3991	!CALL chemtime_rep(itap+itau_phy-1, date0, dtime, itap)
	3992	CALL chemtime_rep(itap+itau_phy-1, date0, phys_tstep, itap)
	3993	#endif
	3994	ENDIF
[2618]	3995
[2469]	3996	!
[2618]	3997	! Appeler le rayonnement mais calculer tout d'abord l'albedo du sol.
	3998	!
	3999	IF (MOD(itaprad,radpas).EQ.0) THEN
[959]	4000
[2618]	4001	!
	4002	!jq - introduce the aerosol direct and first indirect radiative forcings
	4003	!jq - Johannes Quaas, 27/11/2003 (quaas@lmd.jussieu.fr)
[2738]	4004	IF (flag_aerosol .GT. 0) THEN
[2618]	4005	IF (iflag_rrtm .EQ. 0) THEN !--old radiation
	4006	IF (.NOT. aerosol_couple) THEN
	4007	!
	4008	CALL readaerosol_optic( &
[3630]	4009	debut, flag_aerosol, itap, jD_cur-jD_ref, &
[2618]	4010	pdtphys, pplay, paprs, t_seri, rhcl, presnivs, &
	4011	mass_solu_aero, mass_solu_aero_pi, &
	4012	tau_aero, piz_aero, cg_aero, &
	4013	tausum_aero, tau3d_aero)
	4014	ENDIF
	4015	ELSE ! RRTM radiation
	4016	IF (aerosol_couple .AND. config_inca == 'aero' ) THEN
	4017	abort_message='config_inca=aero et rrtm=1 impossible'
[2692]	4018	CALL abort_physic(modname,abort_message,1)
[2618]	4019	ELSE
	4020	!
	4021	#ifdef CPP_RRTM
	4022	IF (NSW.EQ.6) THEN
[2738]	4023	!--new aerosol properties SW and LW
[2618]	4024	!
[2753]	4025	#ifdef CPP_Dust
	4026	!--SPL aerosol model
	4027	CALL splaerosol_optic_rrtm( ok_alw, pplay, paprs, t_seri, rhcl, &
	4028	tr_seri, mass_solu_aero, mass_solu_aero_pi, &
	4029	tau_aero_sw_rrtm, piz_aero_sw_rrtm, cg_aero_sw_rrtm, &
	4030	tausum_aero, tau3d_aero)
	4031	#else
	4032	!--climatologies or INCA aerosols
[3480]	4033	CALL readaerosol_optic_rrtm( debut, aerosol_couple, ok_alw, ok_volcan, &
[3630]	4034	flag_aerosol, flag_bc_internal_mixture, itap, jD_cur-jD_ref, &
[2618]	4035	pdtphys, pplay, paprs, t_seri, rhcl, presnivs, &
	4036	tr_seri, mass_solu_aero, mass_solu_aero_pi, &
	4037	tau_aero_sw_rrtm, piz_aero_sw_rrtm, cg_aero_sw_rrtm, &
[2854]	4038	tausum_aero, drytausum_aero, tau3d_aero)
[2753]	4039	#endif
[3274]	4040
	4041	IF (flag_aerosol .EQ. 7) THEN
	4042	CALL MACv2SP(pphis,pplay,paprs,longitude_deg,latitude_deg, &
	4043	tau_aero_sw_rrtm,piz_aero_sw_rrtm,cg_aero_sw_rrtm)
	4044	ENDIF
	4045
[2738]	4046	!
[2618]	4047	ELSE IF (NSW.EQ.2) THEN
	4048	!--for now we use the old aerosol properties
	4049	!
	4050	CALL readaerosol_optic( &
[3630]	4051	debut, flag_aerosol, itap, jD_cur-jD_ref, &
[2618]	4052	pdtphys, pplay, paprs, t_seri, rhcl, presnivs, &
	4053	mass_solu_aero, mass_solu_aero_pi, &
	4054	tau_aero, piz_aero, cg_aero, &
	4055	tausum_aero, tau3d_aero)
	4056	!
	4057	!--natural aerosols
	4058	tau_aero_sw_rrtm(:,:,1,:)=tau_aero(:,:,3,:)
	4059	piz_aero_sw_rrtm(:,:,1,:)=piz_aero(:,:,3,:)
	4060	cg_aero_sw_rrtm (:,:,1,:)=cg_aero (:,:,3,:)
	4061	!--all aerosols
	4062	tau_aero_sw_rrtm(:,:,2,:)=tau_aero(:,:,2,:)
	4063	piz_aero_sw_rrtm(:,:,2,:)=piz_aero(:,:,2,:)
	4064	cg_aero_sw_rrtm (:,:,2,:)=cg_aero (:,:,2,:)
[2738]	4065	!
	4066	!--no LW optics
	4067	tau_aero_lw_rrtm(:,:,:,:) = 1.e-15
	4068	!
[2618]	4069	ELSE
	4070	abort_message='Only NSW=2 or 6 are possible with ' &
	4071	// 'aerosols and iflag_rrtm=1'
[2692]	4072	CALL abort_physic(modname,abort_message,1)
[2618]	4073	ENDIF
	4074	#else
	4075	abort_message='You should compile with -rrtm if running ' &
	4076	// 'with iflag_rrtm=1'
[2692]	4077	CALL abort_physic(modname,abort_message,1)
[2618]	4078	#endif
	4079	!
	4080	ENDIF
	4081	ENDIF
[2738]	4082	ELSE !--flag_aerosol = 0
[2618]	4083	tausum_aero(:,:,:) = 0.
[2854]	4084	drytausum_aero(:,:) = 0.
[2640]	4085	mass_solu_aero(:,:) = 0.
	4086	mass_solu_aero_pi(:,:) = 0.
[2618]	4087	IF (iflag_rrtm .EQ. 0) THEN !--old radiation
	4088	tau_aero(:,:,:,:) = 1.e-15
	4089	piz_aero(:,:,:,:) = 1.
	4090	cg_aero(:,:,:,:) = 0.
	4091	ELSE
	4092	tau_aero_sw_rrtm(:,:,:,:) = 1.e-15
	4093	tau_aero_lw_rrtm(:,:,:,:) = 1.e-15
	4094	piz_aero_sw_rrtm(:,:,:,:) = 1.0
	4095	cg_aero_sw_rrtm(:,:,:,:) = 0.0
	4096	ENDIF
	4097	ENDIF
	4098	!
[2994]	4099	!--WMO criterion to determine tropopause
[3123]	4100	CALL stratosphere_mask(missing_val, pphis, t_seri, pplay, latitude_deg)
[2994]	4101	!
[2618]	4102	!--STRAT AEROSOL
	4103	!--updates tausum_aero,tau_aero,piz_aero,cg_aero
	4104	IF (flag_aerosol_strat.GT.0) THEN
	4105	IF (prt_level .GE.10) THEN
	4106	PRINT *,'appel a readaerosolstrat', mth_cur
	4107	ENDIF
	4108	IF (iflag_rrtm.EQ.0) THEN
	4109	IF (flag_aerosol_strat.EQ.1) THEN
	4110	CALL readaerosolstrato(debut)
	4111	ELSE
	4112	abort_message='flag_aerosol_strat must equal 1 for rrtm=0'
	4113	CALL abort_physic(modname,abort_message,1)
	4114	ENDIF
	4115	ELSE
[2009]	4116	#ifdef CPP_RRTM
[2690]	4117	#ifndef CPP_StratAer
	4118	!--prescribed strat aerosols
	4119	!--only in the case of non-interactive strat aerosols
[2618]	4120	IF (flag_aerosol_strat.EQ.1) THEN
	4121	CALL readaerosolstrato1_rrtm(debut)
	4122	ELSEIF (flag_aerosol_strat.EQ.2) THEN
[3480]	4123	CALL readaerosolstrato2_rrtm(debut, ok_volcan)
[2618]	4124	ELSE
	4125	abort_message='flag_aerosol_strat must equal 1 or 2 for rrtm=1'
	4126	CALL abort_physic(modname,abort_message,1)
	4127	ENDIF
[2690]	4128	#endif
[2618]	4129	#else
	4130	abort_message='You should compile with -rrtm if running ' &
	4131	// 'with iflag_rrtm=1'
	4132	CALL abort_physic(modname,abort_message,1)
	4133	#endif
	4134	ENDIF
[3567]	4135	ELSE
	4136	tausum_aero(:,:,id_STRAT_phy) = 0.
[2618]	4137	ENDIF
[2690]	4138	!
	4139	#ifdef CPP_RRTM
	4140	#ifdef CPP_StratAer
[2692]	4141	!--compute stratospheric mask
[3123]	4142	CALL stratosphere_mask(missing_val, pphis, t_seri, pplay, latitude_deg)
[2690]	4143	!--interactive strat aerosols
	4144	CALL calcaerosolstrato_rrtm(pplay,t_seri,paprs,debut)
	4145	#endif
	4146	#endif
[2618]	4147	!--fin STRAT AEROSOL
	4148	!
	4149
	4150	! Calculer les parametres optiques des nuages et quelques
	4151	! parametres pour diagnostiques:
	4152	!
	4153	IF (aerosol_couple.AND.config_inca=='aero') THEN
	4154	mass_solu_aero(:,:) = ccm(:,:,1)
	4155	mass_solu_aero_pi(:,:) = ccm(:,:,2)
[2692]	4156	ENDIF
[2618]	4157
	4158	IF (ok_newmicro) then
[3908]	4159	! AI IF (iflag_rrtm.NE.0) THEN
	4160	IF (iflag_rrtm.EQ.1) THEN
[2618]	4161	#ifdef CPP_RRTM
	4162	IF (ok_cdnc.AND.NRADLP.NE.3) THEN
[2469]	4163	abort_message='RRTM choix incoherent NRADLP doit etre egal a 3 ' &
	4164	// 'pour ok_cdnc'
[2618]	4165	CALL abort_physic(modname,abort_message,1)
	4166	ENDIF
[2009]	4167	#else
	4168
[2618]	4169	abort_message='You should compile with -rrtm if running with '//'iflag_rrtm=1'
	4170	CALL abort_physic(modname,abort_message,1)
[2009]	4171	#endif
[2618]	4172	ENDIF
[3274]	4173	CALL newmicro (flag_aerosol, ok_cdnc, bl95_b0, bl95_b1, &
[4412]	4174	paprs, pplay, t_seri, radocond, picefra, cldfra, &
[2618]	4175	cldtau, cldemi, cldh, cldl, cldm, cldt, cldq, &
	4176	flwp, fiwp, flwc, fiwc, &
	4177	mass_solu_aero, mass_solu_aero_pi, &
[4114]	4178	cldtaupi, latitude_deg, re, fl, ref_liq, ref_ice, &
[2618]	4179	ref_liq_pi, ref_ice_pi)
	4180	ELSE
	4181	CALL nuage (paprs, pplay, &
[4412]	4182	t_seri, radocond, picefra, cldfra, cldtau, cldemi, &
[2618]	4183	cldh, cldl, cldm, cldt, cldq, &
	4184	ok_aie, &
	4185	mass_solu_aero, mass_solu_aero_pi, &
	4186	bl95_b0, bl95_b1, &
	4187	cldtaupi, re, fl)
[2469]	4188	ENDIF
	4189	!
[2618]	4190	!IM betaCRF
[2469]	4191	!
[2618]	4192	cldtaurad = cldtau
	4193	cldtaupirad = cldtaupi
	4194	cldemirad = cldemi
	4195	cldfrarad = cldfra
	4196
[2469]	4197	!
[2618]	4198	IF (lon1_beta.EQ.-180..AND.lon2_beta.EQ.180..AND. &
	4199	lat1_beta.EQ.90..AND.lat2_beta.EQ.-90.) THEN
	4200	!
	4201	! global
	4202	!
[3048]	4203	!IM 251017 begin
[3317]	4204	! print*,'physiq betaCRF global zdtime=',zdtime
[3048]	4205	!IM 251017 end
[2618]	4206	DO k=1, klev
	4207	DO i=1, klon
	4208	IF (pplay(i,k).GE.pfree) THEN
[2469]	4209	beta(i,k) = beta_pbl
[2618]	4210	ELSE
[2469]	4211	beta(i,k) = beta_free
[2618]	4212	ENDIF
	4213	IF (mskocean_beta) THEN
[2469]	4214	beta(i,k) = beta(i,k) * pctsrf(i,is_oce)
[2618]	4215	ENDIF
[2469]	4216	cldtaurad(i,k) = cldtau(i,k) * beta(i,k)
	4217	cldtaupirad(i,k) = cldtaupi(i,k) * beta(i,k)
	4218	cldemirad(i,k) = cldemi(i,k) * beta(i,k)
	4219	cldfrarad(i,k) = cldfra(i,k) * beta(i,k)
[2618]	4220	ENDDO
	4221	ENDDO
	4222	!
	4223	ELSE
	4224	!
	4225	! regional
	4226	!
	4227	DO k=1, klev
	4228	DO i=1,klon
	4229	!
	4230	IF (longitude_deg(i).ge.lon1_beta.AND. &
	4231	longitude_deg(i).le.lon2_beta.AND. &
	4232	latitude_deg(i).le.lat1_beta.AND. &
	4233	latitude_deg(i).ge.lat2_beta) THEN
	4234	IF (pplay(i,k).GE.pfree) THEN
	4235	beta(i,k) = beta_pbl
	4236	ELSE
	4237	beta(i,k) = beta_free
	4238	ENDIF
	4239	IF (mskocean_beta) THEN
	4240	beta(i,k) = beta(i,k) * pctsrf(i,is_oce)
	4241	ENDIF
	4242	cldtaurad(i,k) = cldtau(i,k) * beta(i,k)
	4243	cldtaupirad(i,k) = cldtaupi(i,k) * beta(i,k)
	4244	cldemirad(i,k) = cldemi(i,k) * beta(i,k)
	4245	cldfrarad(i,k) = cldfra(i,k) * beta(i,k)
	4246	ENDIF
[2469]	4247	!
[2618]	4248	ENDDO
[2469]	4249	ENDDO
	4250	!
[2618]	4251	ENDIF
[766]	4252
[2618]	4253	!lecture de la chlorophylle pour le nouvel albedo de Sunghye Baek
	4254	IF (ok_chlorophyll) THEN
[2469]	4255	print*,"-- reading chlorophyll"
[2618]	4256	CALL readchlorophyll(debut)
	4257	ENDIF
[1863]	4258
[2524]	4259	!--if ok_suntime_rrtm we use ancillay data for RSUN
	4260	!--previous values are therefore overwritten
	4261	!--this is needed for CMIP6 runs
	4262	!--and only possible for new radiation scheme
	4263	IF (iflag_rrtm.EQ.1.AND.ok_suntime_rrtm) THEN
[2525]	4264	#ifdef CPP_RRTM
[2524]	4265	CALL read_rsun_rrtm(debut)
[2525]	4266	#endif
[2524]	4267	ENDIF
	4268
[2692]	4269	IF (mydebug) THEN
	4270	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	4271	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	4272	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	4273	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	4274	ENDIF
[2524]	4275
[2469]	4276	!
	4277	!sonia : If Iflag_radia >=2, pertubation of some variables
	4278	!input to radiation (DICE)
	4279	!
	4280	IF (iflag_radia .ge. 2) THEN
	4281	zsav_tsol (:) = zxtsol(:)
[2692]	4282	CALL perturb_radlwsw(zxtsol,iflag_radia)
[2469]	4283	ENDIF
[2328]	4284
[2469]	4285	IF (aerosol_couple.AND.config_inca=='aero') THEN
[959]	4286	#ifdef INCA
[2469]	4287	CALL radlwsw_inca &
[3338]	4288	(chemistry_couple, kdlon,kflev,dist, rmu0, fract, solaire, &
[2469]	4289	paprs, pplay,zxtsol,albsol1, albsol2, t_seri,q_seri, &
[2684]	4290	size(wo,3), wo, &
[2469]	4291	cldfrarad, cldemirad, cldtaurad, &
	4292	heat,heat0,cool,cool0,albpla, &
	4293	topsw,toplw,solsw,sollw, &
	4294	sollwdown, &
	4295	topsw0,toplw0,solsw0,sollw0, &
	4296	lwdn0, lwdn, lwup0, lwup, &
	4297	swdn0, swdn, swup0, swup, &
	4298	ok_ade, ok_aie, &
	4299	tau_aero, piz_aero, cg_aero, &
	4300	topswad_aero, solswad_aero, &
	4301	topswad0_aero, solswad0_aero, &
	4302	topsw_aero, topsw0_aero, &
	4303	solsw_aero, solsw0_aero, &
	4304	cldtaupirad, &
	4305	topswai_aero, solswai_aero)
[955]	4306	#endif
[2469]	4307	ELSE
	4308	!
	4309	!IM calcul radiatif pour le cas actuel
	4310	!
	4311	RCO2 = RCO2_act
	4312	RCH4 = RCH4_act
	4313	RN2O = RN2O_act
	4314	RCFC11 = RCFC11_act
	4315	RCFC12 = RCFC12_act
[3450]	4316	!
	4317	!--interactive CO2 in ppm from carbon cycle
[4298]	4318	IF (carbon_cycle_rad) RCO2=RCO2_glo
[2469]	4319	!
	4320	IF (prt_level .GE.10) THEN
	4321	print *,' ->radlwsw, number 1 '
	4322	ENDIF
	4323	!
	4324	CALL radlwsw &
	4325	(dist, rmu0, fract, &
	4326	!albedo SB >>>
	4327	! paprs, pplay,zxtsol,albsol1, albsol2, &
	4328	paprs, pplay,zxtsol,SFRWL,albsol_dir, albsol_dif, &
	4329	!albedo SB <<<
	4330	t_seri,q_seri,wo, &
	4331	cldfrarad, cldemirad, cldtaurad, &
[3989]	4332	ok_ade.OR.flag_aerosol_strat.GT.0, ok_aie, ok_volcan, flag_volc_surfstrat, &
	4333	flag_aerosol, flag_aerosol_strat, flag_aer_feedback, &
[2469]	4334	tau_aero, piz_aero, cg_aero, &
	4335	tau_aero_sw_rrtm, piz_aero_sw_rrtm, cg_aero_sw_rrtm, &
	4336	! Rajoute par OB pour RRTM
	4337	tau_aero_lw_rrtm, &
[3630]	4338	cldtaupirad, &
[3048]	4339	! zqsat, flwcrad, fiwcrad, &
[2469]	4340	zqsat, flwc, fiwc, &
	4341	ref_liq, ref_ice, ref_liq_pi, ref_ice_pi, &
	4342	heat,heat0,cool,cool0,albpla, &
[3479]	4343	heat_volc,cool_volc, &
[3756]	4344	topsw,toplw,solsw,solswfdiff,sollw, &
[2469]	4345	sollwdown, &
	4346	topsw0,toplw0,solsw0,sollw0, &
[3106]	4347	lwdnc0, lwdn0, lwdn, lwupc0, lwup0, lwup, &
[3082]	4348	swdnc0, swdn0, swdn, swupc0, swup0, swup, &
[2469]	4349	topswad_aero, solswad_aero, &
	4350	topswai_aero, solswai_aero, &
	4351	topswad0_aero, solswad0_aero, &
	4352	topsw_aero, topsw0_aero, &
	4353	solsw_aero, solsw0_aero, &
	4354	topswcf_aero, solswcf_aero, &
	4355	!-C. Kleinschmitt for LW diagnostics
	4356	toplwad_aero, sollwad_aero,&
	4357	toplwai_aero, sollwai_aero, &
	4358	toplwad0_aero, sollwad0_aero,&
	4359	!-end
	4360	ZLWFT0_i, ZFLDN0, ZFLUP0, &
[3117]	4361	ZSWFT0_i, ZFSDN0, ZFSUP0)
[879]	4362
[3048]	4363	!lwoff=y, betalwoff=1. : offset LW CRE for radiation code and other
	4364	!schemes
	4365	toplw = toplw + betalwoff * (toplw0 - toplw)
	4366	sollw = sollw + betalwoff * (sollw0 - sollw)
	4367	lwdn = lwdn + betalwoff * (lwdn0 - lwdn)
	4368	lwup = lwup + betalwoff * (lwup0 - lwup)
	4369	sollwdown(:)= sollwdown(:) + betalwoff (-1.ZFLDN0(:,1) - &
	4370	sollwdown(:))
	4371	cool = cool + betalwoff * (cool0 - cool)
	4372
[2679]	4373	#ifndef CPP_XIOS
[4056]	4374	!
[2469]	4375	!IM 2eme calcul radiatif pour le cas perturbe ou au moins un
	4376	!IM des taux doit etre different du taux actuel
	4377	!IM Par defaut on a les taux perturbes egaux aux taux actuels
	4378	!
[2989]	4379	IF (RCO2_per.NE.RCO2_act.OR. &
	4380	RCH4_per.NE.RCH4_act.OR. &
	4381	RN2O_per.NE.RN2O_act.OR. &
	4382	RCFC11_per.NE.RCFC11_act.OR. &
	4383	RCFC12_per.NE.RCFC12_act) ok_4xCO2atm =.TRUE.
[3149]	4384	#endif
[2989]	4385	!
[2692]	4386	IF (ok_4xCO2atm) THEN
[2469]	4387	!
	4388	RCO2 = RCO2_per
	4389	RCH4 = RCH4_per
	4390	RN2O = RN2O_per
	4391	RCFC11 = RCFC11_per
	4392	RCFC12 = RCFC12_per
	4393	!
	4394	IF (prt_level .GE.10) THEN
	4395	print *,' ->radlwsw, number 2 '
	4396	ENDIF
	4397	!
	4398	CALL radlwsw &
	4399	(dist, rmu0, fract, &
	4400	!albedo SB >>>
	4401	! paprs, pplay,zxtsol,albsol1, albsol2, &
	4402	paprs, pplay,zxtsol,SFRWL,albsol_dir, albsol_dif, &
	4403	!albedo SB <<<
	4404	t_seri,q_seri,wo, &
[2640]	4405	cldfrarad, cldemirad, cldtaurad, &
[3989]	4406	ok_ade.OR.flag_aerosol_strat.GT.0, ok_aie, ok_volcan, flag_volc_surfstrat, &
	4407	flag_aerosol, flag_aerosol_strat, flag_aer_feedback, &
[2469]	4408	tau_aero, piz_aero, cg_aero, &
	4409	tau_aero_sw_rrtm, piz_aero_sw_rrtm, cg_aero_sw_rrtm, &
	4410	! Rajoute par OB pour RRTM
	4411	tau_aero_lw_rrtm, &
[3630]	4412	cldtaupi, &
[3048]	4413	! zqsat, flwcrad, fiwcrad, &
[2469]	4414	zqsat, flwc, fiwc, &
	4415	ref_liq, ref_ice, ref_liq_pi, ref_ice_pi, &
	4416	heatp,heat0p,coolp,cool0p,albplap, &
[3479]	4417	heat_volc,cool_volc, &
[3756]	4418	topswp,toplwp,solswp,solswfdiffp,sollwp, &
[2469]	4419	sollwdownp, &
	4420	topsw0p,toplw0p,solsw0p,sollw0p, &
[3106]	4421	lwdnc0p, lwdn0p, lwdnp, lwupc0p, lwup0p, lwupp, &
[3082]	4422	swdnc0p, swdn0p, swdnp, swupc0p, swup0p, swupp, &
[2469]	4423	topswad_aerop, solswad_aerop, &
	4424	topswai_aerop, solswai_aerop, &
	4425	topswad0_aerop, solswad0_aerop, &
	4426	topsw_aerop, topsw0_aerop, &
	4427	solsw_aerop, solsw0_aerop, &
	4428	topswcf_aerop, solswcf_aerop, &
	4429	!-C. Kleinschmitt for LW diagnostics
	4430	toplwad_aerop, sollwad_aerop,&
	4431	toplwai_aerop, sollwai_aerop, &
	4432	toplwad0_aerop, sollwad0_aerop,&
	4433	!-end
	4434	ZLWFT0_i, ZFLDN0, ZFLUP0, &
[3117]	4435	ZSWFT0_i, ZFSDN0, ZFSUP0)
[3987]	4436	ENDIF !ok_4xCO2atm
[2469]	4437	ENDIF ! aerosol_couple
	4438	itaprad = 0
	4439	!
	4440	! If Iflag_radia >=2, reset pertubed variables
	4441	!
	4442	IF (iflag_radia .ge. 2) THEN
	4443	zxtsol(:) = zsav_tsol (:)
	4444	ENDIF
	4445	ENDIF ! MOD(itaprad,radpas)
	4446	itaprad = itaprad + 1
[879]	4447
[2469]	4448	IF (iflag_radia.eq.0) THEN
	4449	IF (prt_level.ge.9) THEN
	4450	PRINT *,'--------------------------------------------------'
	4451	PRINT *,'>>>> ATTENTION rayonnement desactive pour ce cas'
	4452	PRINT *,'>>>> heat et cool mis a zero '
	4453	PRINT *,'--------------------------------------------------'
[2692]	4454	ENDIF
[2469]	4455	heat=0.
	4456	cool=0.
	4457	sollw=0. ! MPL 01032011
	4458	solsw=0.
	4459	radsol=0.
	4460	swup=0. ! MPL 27102011 pour les fichiers AMMA_profiles et AMMA_scalars
	4461	swup0=0.
	4462	lwup=0.
	4463	lwup0=0.
	4464	lwdn=0.
	4465	lwdn0=0.
[2692]	4466	ENDIF
[782]	4467
[2469]	4468	!
	4469	! Calculer radsol a l'exterieur de radlwsw
	4470	! pour prendre en compte le cycle diurne
	4471	! recode par Olivier Boucher en sept 2015
	4472	!
	4473	radsol=solsw*swradcorr+sollw
[2618]	4474
[2692]	4475	IF (ok_4xCO2atm) THEN
[2469]	4476	radsolp=solswp*swradcorr+sollwp
[2692]	4477	ENDIF
[2359]	4478
[2469]	4479	!
	4480	! Ajouter la tendance des rayonnements (tous les pas)
	4481	! avec une correction pour le cycle diurne dans le SW
	4482	!
[2359]	4483
[2469]	4484	DO k=1, klev
[3435]	4485	d_t_swr(:,k)=swradcorr(:)heat(:,k)phys_tstep/RDAY
	4486	d_t_sw0(:,k)=swradcorr(:)heat0(:,k)phys_tstep/RDAY
	4487	d_t_lwr(:,k)=-cool(:,k)*phys_tstep/RDAY
	4488	d_t_lw0(:,k)=-cool0(:,k)*phys_tstep/RDAY
[2469]	4489	ENDDO
[2194]	4490
[2812]	4491	CALL add_phys_tend(du0,dv0,d_t_swr,dq0,dql0,dqi0,paprs,'SW',abortphy,flag_inhib_tend,itap,0)
[3461]	4492	CALL prt_enerbil('SW',itap)
[2812]	4493	CALL add_phys_tend(du0,dv0,d_t_lwr,dq0,dql0,dqi0,paprs,'LW',abortphy,flag_inhib_tend,itap,0)
[3461]	4494	CALL prt_enerbil('LW',itap)
[1863]	4495
[2469]	4496	!
[2692]	4497	IF (mydebug) THEN
	4498	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	4499	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	4500	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	4501	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	4502	ENDIF
[1863]	4503
[2469]	4504	! Calculer l'hydrologie de la surface
	4505	!
	4506	! CALL hydrol(dtime,pctsrf,rain_fall, snow_fall, zxevap,
	4507	! . agesno, ftsol,fqsurf,fsnow, ruis)
	4508	!
[1001]	4509
[2469]	4510	!
	4511	! Calculer le bilan du sol et la derive de temperature (couplage)
	4512	!
	4513	DO i = 1, klon
	4514	! bils(i) = radsol(i) - sens(i) - evap(i)*RLVTT
	4515	! a la demande de JLD
	4516	bils(i) = radsol(i) - sens(i) + zxfluxlat(i)
	4517	ENDDO
	4518	!
	4519	!moddeblott(jan95)
	4520	! Appeler le programme de parametrisation de l'orographie
	4521	! a l'echelle sous-maille:
	4522	!
	4523	IF (prt_level .GE.10) THEN
	4524	print *,' call orography ? ', ok_orodr
	4525	ENDIF
	4526	!
	4527	IF (ok_orodr) THEN
	4528	!
	4529	! selection des points pour lesquels le shema est actif:
	4530	igwd=0
	4531	DO i=1,klon
	4532	itest(i)=0
[4458]	4533	zrel_oro(i)=zstd(i)/(max(zsig(i),1.E-8)*sqrt(cell_area(i)))
	4534	!zrel_oro: relative mountain height wrt relief explained by mean slope
	4535	! -> condition on zrel_oro can deactivate the drag on tilted planar terrains
[4352]	4536	! such as ice sheets (work by V. Wiener)
[4458]	4537	! zpmm_orodr_t and zstd_orodr_t are activation thresholds set by F. Lott to
	4538	! earn computation time but they are not physical.
[4466]	4539	IF (((zpic(i)-zmea(i)).GT.zpmm_orodr_t).AND.(zstd(i).GT.zstd_orodr_t).AND.(zrel_oro(i).LE.zrel_oro_t)) THEN
[2469]	4540	itest(i)=1
	4541	igwd=igwd+1
	4542	idx(igwd)=i
	4543	ENDIF
	4544	ENDDO
	4545	! igwdim=MAX(1,igwd)
	4546	!
	4547	IF (ok_strato) THEN
[1863]	4548
[3435]	4549	CALL drag_noro_strato(0,klon,klev,phys_tstep,paprs,pplay, &
[2469]	4550	zmea,zstd, zsig, zgam, zthe,zpic,zval, &
	4551	igwd,idx,itest, &
	4552	t_seri, u_seri, v_seri, &
	4553	zulow, zvlow, zustrdr, zvstrdr, &
	4554	d_t_oro, d_u_oro, d_v_oro)
[1863]	4555
[2469]	4556	ELSE
[3435]	4557	CALL drag_noro(klon,klev,phys_tstep,paprs,pplay, &
[2469]	4558	zmea,zstd, zsig, zgam, zthe,zpic,zval, &
	4559	igwd,idx,itest, &
	4560	t_seri, u_seri, v_seri, &
	4561	zulow, zvlow, zustrdr, zvstrdr, &
	4562	d_t_oro, d_u_oro, d_v_oro)
	4563	ENDIF
	4564	!
	4565	! ajout des tendances
	4566	!-----------------------------------------------------------------------
	4567	! ajout des tendances de la trainee de l'orographie
	4568	CALL add_phys_tend(d_u_oro,d_v_oro,d_t_oro,dq0,dql0,dqi0,paprs,'oro', &
[2812]	4569	abortphy,flag_inhib_tend,itap,0)
[3461]	4570	CALL prt_enerbil('oro',itap)
[2469]	4571	!----------------------------------------------------------------------
	4572	!
	4573	ENDIF ! fin de test sur ok_orodr
	4574	!
[2692]	4575	IF (mydebug) THEN
	4576	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	4577	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	4578	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	4579	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	4580	ENDIF
[1001]	4581
[2469]	4582	IF (ok_orolf) THEN
	4583	!
	4584	! selection des points pour lesquels le shema est actif:
	4585	igwd=0
	4586	DO i=1,klon
	4587	itest(i)=0
[4458]	4588	!zrel_oro: relative mountain height wrt relief explained by mean slope
	4589	! -> condition on zrel_oro can deactivate the lifting on tilted planar terrains
[4352]	4590	! such as ice sheets (work by V. Wiener)
[4458]	4591	zrel_oro(i)=zstd(i)/(max(zsig(i),1.E-8)*sqrt(cell_area(i)))
[4466]	4592	IF (((zpic(i)-zmea(i)).GT.zpmm_orolf_t).AND.(zrel_oro(i).LE.zrel_oro_t)) THEN
[2469]	4593	itest(i)=1
	4594	igwd=igwd+1
	4595	idx(igwd)=i
	4596	ENDIF
	4597	ENDDO
	4598	! igwdim=MAX(1,igwd)
	4599	!
	4600	IF (ok_strato) THEN
[1001]	4601
[3435]	4602	CALL lift_noro_strato(klon,klev,phys_tstep,paprs,pplay, &
[2469]	4603	latitude_deg,zmea,zstd,zpic,zgam,zthe,zpic,zval, &
	4604	igwd,idx,itest, &
	4605	t_seri, u_seri, v_seri, &
	4606	zulow, zvlow, zustrli, zvstrli, &
	4607	d_t_lif, d_u_lif, d_v_lif )
[2333]	4608
[2469]	4609	ELSE
[3435]	4610	CALL lift_noro(klon,klev,phys_tstep,paprs,pplay, &
[2469]	4611	latitude_deg,zmea,zstd,zpic, &
	4612	itest, &
	4613	t_seri, u_seri, v_seri, &
	4614	zulow, zvlow, zustrli, zvstrli, &
	4615	d_t_lif, d_u_lif, d_v_lif)
	4616	ENDIF
[1638]	4617
[2469]	4618	! ajout des tendances de la portance de l'orographie
	4619	CALL add_phys_tend(d_u_lif, d_v_lif, d_t_lif, dq0, dql0, dqi0, paprs, &
[2812]	4620	'lif', abortphy,flag_inhib_tend,itap,0)
[3461]	4621	CALL prt_enerbil('lif',itap)
[2469]	4622	ENDIF ! fin de test sur ok_orolf
[1638]	4623
[2469]	4624	IF (ok_hines) then
	4625	! HINES GWD PARAMETRIZATION
	4626	east_gwstress=0.
	4627	west_gwstress=0.
	4628	du_gwd_hines=0.
	4629	dv_gwd_hines=0.
[3435]	4630	CALL hines_gwd(klon, klev, phys_tstep, paprs, pplay, latitude_deg, t_seri, &
[2469]	4631	u_seri, v_seri, zustr_gwd_hines, zvstr_gwd_hines, d_t_hin, &
	4632	du_gwd_hines, dv_gwd_hines)
	4633	zustr_gwd_hines=0.
	4634	zvstr_gwd_hines=0.
	4635	DO k = 1, klev
[3435]	4636	zustr_gwd_hines(:)=zustr_gwd_hines(:)+ du_gwd_hines(:, k)/phys_tstep &
[2469]	4637	* (paprs(:, k)-paprs(:, k+1))/rg
[3435]	4638	zvstr_gwd_hines(:)=zvstr_gwd_hines(:)+ dv_gwd_hines(:, k)/phys_tstep &
[2469]	4639	* (paprs(:, k)-paprs(:, k+1))/rg
	4640	ENDDO
[1001]	4641
[2469]	4642	d_t_hin(:, :)=0.
	4643	CALL add_phys_tend(du_gwd_hines, dv_gwd_hines, d_t_hin, dq0, dql0, &
[2812]	4644	dqi0, paprs, 'hin', abortphy,flag_inhib_tend,itap,0)
[3461]	4645	CALL prt_enerbil('hin',itap)
[2469]	4646	ENDIF
[2333]	4647
[2469]	4648	IF (.not. ok_hines .and. ok_gwd_rando) then
[3435]	4649	! ym missing init for east_gwstress & west_gwstress -> added in phys_local_var_mod
	4650	CALL acama_GWD_rando(PHYS_TSTEP, pplay, latitude_deg, t_seri, u_seri, &
[2469]	4651	v_seri, rot, zustr_gwd_front, zvstr_gwd_front, du_gwd_front, &
	4652	dv_gwd_front, east_gwstress, west_gwstress)
	4653	zustr_gwd_front=0.
	4654	zvstr_gwd_front=0.
	4655	DO k = 1, klev
[3435]	4656	zustr_gwd_front(:)=zustr_gwd_front(:)+ du_gwd_front(:, k)/phys_tstep &
[2469]	4657	* (paprs(:, k)-paprs(:, k+1))/rg
[3435]	4658	zvstr_gwd_front(:)=zvstr_gwd_front(:)+ dv_gwd_front(:, k)/phys_tstep &
[2469]	4659	* (paprs(:, k)-paprs(:, k+1))/rg
	4660	ENDDO
[644]	4661
[2469]	4662	CALL add_phys_tend(du_gwd_front, dv_gwd_front, dt0, dq0, dql0, dqi0, &
[2812]	4663	paprs, 'front_gwd_rando', abortphy,flag_inhib_tend,itap,0)
[3461]	4664	CALL prt_enerbil('front_gwd_rando',itap)
[2469]	4665	ENDIF
[1938]	4666
[2692]	4667	IF (ok_gwd_rando) THEN
[3435]	4668	CALL FLOTT_GWD_rando(PHYS_TSTEP, pplay, t_seri, u_seri, v_seri, &
[2469]	4669	rain_fall + snow_fall, zustr_gwd_rando, zvstr_gwd_rando, &
	4670	du_gwd_rando, dv_gwd_rando, east_gwstress, west_gwstress)
	4671	CALL add_phys_tend(du_gwd_rando, dv_gwd_rando, dt0, dq0, dql0, dqi0, &
[2812]	4672	paprs, 'flott_gwd_rando', abortphy,flag_inhib_tend,itap,0)
[3461]	4673	CALL prt_enerbil('flott_gwd_rando',itap)
[2469]	4674	zustr_gwd_rando=0.
	4675	zvstr_gwd_rando=0.
	4676	DO k = 1, klev
[3435]	4677	zustr_gwd_rando(:)=zustr_gwd_rando(:)+ du_gwd_rando(:, k)/phys_tstep &
[2469]	4678	* (paprs(:, k)-paprs(:, k+1))/rg
[3435]	4679	zvstr_gwd_rando(:)=zvstr_gwd_rando(:)+ dv_gwd_rando(:, k)/phys_tstep &
[2469]	4680	* (paprs(:, k)-paprs(:, k+1))/rg
	4681	ENDDO
[2692]	4682	ENDIF
[766]	4683
[2469]	4684	! STRESS NECESSAIRES: TOUTE LA PHYSIQUE
[1279]	4685
[2692]	4686	IF (mydebug) THEN
	4687	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	4688	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	4689	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	4690	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	4691	ENDIF
[2136]	4692
[2469]	4693	DO i = 1, klon
	4694	zustrph(i)=0.
	4695	zvstrph(i)=0.
	4696	ENDDO
	4697	DO k = 1, klev
	4698	DO i = 1, klon
[3435]	4699	zustrph(i)=zustrph(i)+(u_seri(i,k)-u(i,k))/phys_tstep* &
[2469]	4700	(paprs(i,k)-paprs(i,k+1))/rg
[3435]	4701	zvstrph(i)=zvstrph(i)+(v_seri(i,k)-v(i,k))/phys_tstep* &
[2469]	4702	(paprs(i,k)-paprs(i,k+1))/rg
	4703	ENDDO
	4704	ENDDO
	4705	!
	4706	!IM calcul composantes axiales du moment angulaire et couple des montagnes
	4707	!
	4708	IF (is_sequential .and. ok_orodr) THEN
	4709	CALL aaam_bud (27,klon,klev,jD_cur-jD_ref,jH_cur, &
	4710	ra,rg,romega, &
	4711	latitude_deg,longitude_deg,pphis, &
	4712	zustrdr,zustrli,zustrph, &
	4713	zvstrdr,zvstrli,zvstrph, &
	4714	paprs,u,v, &
	4715	aam, torsfc)
	4716	ENDIF
	4717	!IM cf. FLott END
	4718	!DC Calcul de la tendance due au methane
[3461]	4719	IF (ok_qch4) THEN
[2469]	4720	CALL METHOX(1,klon,klon,klev,q_seri,d_q_ch4,pplay)
	4721	! ajout de la tendance d'humidite due au methane
[3435]	4722	d_q_ch4_dtime(:,:) = d_q_ch4(:,:)*phys_tstep
[2801]	4723	CALL add_phys_tend(du0, dv0, dt0, d_q_ch4_dtime, dql0, dqi0, paprs, &
[2812]	4724	'q_ch4', abortphy,flag_inhib_tend,itap,0)
[3435]	4725	d_q_ch4(:,:) = d_q_ch4_dtime(:,:)/phys_tstep
[2692]	4726	ENDIF
[2469]	4727	!
	4728	!
[2897]	4729
	4730	!===============================================================
	4731	! Additional tendency of TKE due to orography
	4732	!===============================================================
	4733	!
	4734	! Inititialization
	4735	!------------------
	4736
	4737	addtkeoro=0
	4738	CALL getin_p('addtkeoro',addtkeoro)
	4739
	4740	IF (prt_level.ge.5) &
	4741	print*,'addtkeoro', addtkeoro
	4742
	4743	alphatkeoro=1.
	4744	CALL getin_p('alphatkeoro',alphatkeoro)
	4745	alphatkeoro=min(max(0.,alphatkeoro),1.)
	4746
[3461]	4747	smallscales_tkeoro=.FALSE.
[2897]	4748	CALL getin_p('smallscales_tkeoro',smallscales_tkeoro)
	4749
	4750
[3461]	4751	dtadd(:,:)=0.
	4752	duadd(:,:)=0.
	4753	dvadd(:,:)=0.
[2897]	4754
	4755	! Choices for addtkeoro:
	4756	! ** 0 no TKE tendency from orography
	4757	! ** 1 we include a fraction alphatkeoro of the whole tendency duoro
	4758	! ** 2 we include a fraction alphatkeoro of the gravity wave part of duoro
	4759	!
	4760
	4761	IF (addtkeoro .GT. 0 .AND. ok_orodr ) THEN
	4762	! -------------------------------------------
	4763
	4764
	4765	! selection des points pour lesquels le schema est actif:
	4766
	4767
	4768	IF (addtkeoro .EQ. 1 ) THEN
	4769
	4770	duadd(:,:)=alphatkeoro*d_u_oro(:,:)
	4771	dvadd(:,:)=alphatkeoro*d_v_oro(:,:)
	4772
	4773	ELSE IF (addtkeoro .EQ. 2) THEN
	4774
[3461]	4775	IF (smallscales_tkeoro) THEN
[2897]	4776	igwd=0
	4777	DO i=1,klon
	4778	itest(i)=0
	4779	! Etienne: ici je prends en compte plus de relief que la routine drag_noro_strato
	4780	! car on peut s'attendre a ce que les petites echelles produisent aussi de la TKE
	4781	! Mais attention, cela ne va pas dans le sens de la conservation de l'energie!
[4466]	4782	IF ((zstd(i).GT.1.0) .AND.(zrel_oro(i).LE.zrel_oro_t)) THEN
[2897]	4783	itest(i)=1
	4784	igwd=igwd+1
	4785	idx(igwd)=i
	4786	ENDIF
	4787	ENDDO
	4788
	4789	ELSE
	4790
	4791	igwd=0
	4792	DO i=1,klon
	4793	itest(i)=0
[4466]	4794	IF (((zpic(i)-zmea(i)).GT.zpmm_orodr_t).AND.(zstd(i).GT.zstd_orodr_t).AND.(zrel_oro(i).LE.zrel_oro_t)) THEN
[2897]	4795	itest(i)=1
	4796	igwd=igwd+1
	4797	idx(igwd)=i
[3461]	4798	ENDIF
[2897]	4799	ENDDO
	4800
[3461]	4801	ENDIF
[2897]	4802
[3461]	4803	CALL drag_noro_strato(addtkeoro,klon,klev,phys_tstep,paprs,pplay, &
[2897]	4804	zmea,zstd, zsig, zgam, zthe,zpic,zval, &
	4805	igwd,idx,itest, &
	4806	t_seri, u_seri, v_seri, &
	4807	zulow, zvlow, zustrdr, zvstrdr, &
	4808	d_t_oro_gw, d_u_oro_gw, d_v_oro_gw)
	4809
[3461]	4810	zustrdr(:)=0.
	4811	zvstrdr(:)=0.
	4812	zulow(:)=0.
	4813	zvlow(:)=0.
[2897]	4814
[3461]	4815	duadd(:,:)=alphatkeoro*d_u_oro_gw(:,:)
	4816	dvadd(:,:)=alphatkeoro*d_v_oro_gw(:,:)
	4817	ENDIF
[2897]	4818
	4819
	4820	! TKE update from subgrid temperature and wind tendencies
	4821	!----------------------------------------------------------
	4822	forall (k=1: nbp_lev) exner(:, k) = (pplay(:, k)/paprs(:,1))**RKAPPA
	4823
	4824
[3198]	4825	CALL tend_to_tke(pdtphys,paprs,exner,t_seri,u_seri,v_seri,dtadd,duadd,dvadd,pctsrf,pbl_tke)
[3888]	4826	!
	4827	! Prevent pbl_tke_w from becoming negative
	4828	wake_delta_pbl_tke(:,:,:) = max(wake_delta_pbl_tke(:,:,:), -pbl_tke(:,:,:))
	4829	!
[2897]	4830
	4831	ENDIF
	4832	! -----
	4833	!===============================================================
	4834
	4835
[2469]	4836	!====================================================================
	4837	! Interface Simulateur COSP (Calipso, ISCCP, MISR, ..)
	4838	!====================================================================
	4839	! Abderrahmane 24.08.09
	4840
	4841	IF (ok_cosp) THEN
	4842	! adeclarer
[1279]	4843	#ifdef CPP_COSP
[3435]	4844	IF (itap.eq.1.or.MOD(itap,NINT(freq_cosp/phys_tstep)).EQ.0) THEN
[1279]	4845
[2469]	4846	IF (prt_level .GE.10) THEN
	4847	print*,'freq_cosp',freq_cosp
	4848	ENDIF
	4849	mr_ozone=wo(:, :, 1) * dobson_u * 1e3 / zmasse
	4850	! print*,'Dans physiq.F avant appel cosp ref_liq,ref_ice=',
	4851	! s ref_liq,ref_ice
[3435]	4852	CALL phys_cosp(itap,phys_tstep,freq_cosp, &
[2469]	4853	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
[2794]	4854	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
[2469]	4855	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
	4856	JrNt,ref_liq,ref_ice, &
	4857	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
	4858	zu10m,zv10m,pphis, &
	4859	zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, &
	4860	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
	4861	prfl(:,1:klev),psfl(:,1:klev), &
	4862	pmflxr(:,1:klev),pmflxs(:,1:klev), &
	4863	mr_ozone,cldtau, cldemi)
[1412]	4864
[2469]	4865	! L calipso2D,calipso3D,cfadlidar,parasolrefl,atb,betamol,
	4866	! L cfaddbze,clcalipso2,dbze,cltlidarradar,
	4867	! M clMISR,
	4868	! R clisccp2,boxtauisccp,boxptopisccp,tclisccp,ctpisccp,
	4869	! I tauisccp,albisccp,meantbisccp,meantbclrisccp)
[1279]	4870
[2469]	4871	ENDIF
[3370]	4872	#endif
[1279]	4873
[3370]	4874	#ifdef CPP_COSP2
[3435]	4875	IF (itap.eq.1.or.MOD(itap,NINT(freq_cosp/phys_tstep)).EQ.0) THEN
[3370]	4876
	4877	IF (prt_level .GE.10) THEN
	4878	print*,'freq_cosp',freq_cosp
	4879	ENDIF
	4880	mr_ozone=wo(:, :, 1) * dobson_u * 1e3 / zmasse
	4881	print*,'Dans physiq.F avant appel '
	4882	! s ref_liq,ref_ice
[3435]	4883	CALL phys_cosp2(itap,phys_tstep,freq_cosp, &
[3370]	4884	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
	4885	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
	4886	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
	4887	JrNt,ref_liq,ref_ice, &
	4888	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
	4889	zu10m,zv10m,pphis, &
	4890	zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, &
	4891	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
	4892	prfl(:,1:klev),psfl(:,1:klev), &
	4893	pmflxr(:,1:klev),pmflxs(:,1:klev), &
	4894	mr_ozone,cldtau, cldemi)
	4895	ENDIF
[1279]	4896	#endif
[3370]	4897
[3491]	4898	#ifdef CPP_COSPV2
	4899	IF (itap.eq.1.or.MOD(itap,NINT(freq_cosp/phys_tstep)).EQ.0) THEN
[3726]	4900	! IF (MOD(itap,NINT(freq_cosp/phys_tstep)).EQ.0) THEN
[3491]	4901
	4902	IF (prt_level .GE.10) THEN
	4903	print*,'freq_cosp',freq_cosp
	4904	ENDIF
[3726]	4905	DO k = 1, klev
	4906	DO i = 1, klon
	4907	phicosp(i,k) = pphi(i,k) + pphis(i)
	4908	ENDDO
	4909	ENDDO
[3491]	4910	mr_ozone=wo(:, :, 1) * dobson_u * 1e3 / zmasse
	4911	print*,'Dans physiq.F avant appel '
	4912	! s ref_liq,ref_ice
	4913	CALL lmdz_cosp_interface(itap,phys_tstep,freq_cosp, &
	4914	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
	4915	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
	4916	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
	4917	JrNt,ref_liq,ref_ice, &
	4918	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
	4919	zu10m,zv10m,pphis, &
	4920	zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, &
	4921	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
	4922	prfl(:,1:klev),psfl(:,1:klev), &
	4923	pmflxr(:,1:klev),pmflxs(:,1:klev), &
	4924	mr_ozone,cldtau, cldemi)
	4925	ENDIF
	4926	#endif
	4927
[2469]	4928	ENDIF !ok_cosp
[2580]	4929
	4930
	4931	! Marine
	4932
	4933	IF (ok_airs) then
	4934
[3435]	4935	IF (itap.eq.1.or.MOD(itap,NINT(freq_airs/phys_tstep)).EQ.0) THEN
[2692]	4936	write(,) 'je vais appeler simu_airs, ok_airs, freq_airs=', ok_airs, freq_airs
	4937	CALL simu_airs(itap,rneb, t_seri, cldemi, fiwc, ref_ice, pphi, pplay, paprs,&
	4938	& map_prop_hc,map_prop_hist,&
	4939	& map_emis_hc,map_iwp_hc,map_deltaz_hc,map_pcld_hc,map_tcld_hc,&
	4940	& map_emis_Cb,map_pcld_Cb,map_tcld_Cb,&
	4941	& map_emis_ThCi,map_pcld_ThCi,map_tcld_ThCi,&
	4942	& map_emis_Anv,map_pcld_Anv,map_tcld_Anv,&
	4943	& map_emis_hist,map_iwp_hist,map_deltaz_hist,map_rad_hist,&
	4944	& map_ntot,map_hc,map_hist,&
	4945	& map_Cb,map_ThCi,map_Anv,&
	4946	& alt_tropo )
[2580]	4947	ENDIF
	4948
	4949	ENDIF ! ok_airs
	4950
	4951
[2469]	4952	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	4953	!AA
	4954	!AA Installation de l'interface online-offline pour traceurs
	4955	!AA
	4956	!====================================================================
	4957	! Calcul des tendances traceurs
	4958	!====================================================================
	4959	!
[959]	4960
[4389]	4961	IF (type_trac == 'repr') THEN
[3666]	4962	!MM pas d'impact, car on recupere q_seri,tr_seri,t_seri via phys_local_var_mod
	4963	!MM dans Reprobus
[2469]	4964	sh_in(:,:) = q_seri(:,:)
[3666]	4965	#ifdef REPROBUS
	4966	d_q_rep(:,:) = 0.
	4967	d_ql_rep(:,:) = 0.
	4968	d_qi_rep(:,:) = 0.
	4969	#endif
[2469]	4970	ELSE
	4971	sh_in(:,:) = qx(:,:,ivap)
[4098]	4972	IF (nqo >= 3) THEN
[3861]	4973	ch_in(:,:) = qx(:,:,iliq) + qx(:,:,isol)
	4974	ELSE
	4975	ch_in(:,:) = qx(:,:,iliq)
	4976	ENDIF
[2692]	4977	ENDIF
[1565]	4978
[2630]	4979	#ifdef CPP_Dust
[3776]	4980	! Avec SPLA, iflag_phytrac est forcé =1
	4981	CALL phytracr_spl ( debut,lafin , jD_cur,jH_cur,iflag_con, & ! I
[2630]	4982	pdtphys,ftsol, & ! I
	4983	t,q_seri,paprs,pplay,RHcl, & ! I
	4984	pmfu, pmfd, pen_u, pde_u, pen_d, pde_d, & ! I
	4985	coefh(1:klon,1:klev,is_ave), cdragh, cdragm, u1, v1, & ! I
	4986	u_seri, v_seri, latitude_deg, longitude_deg, &
	4987	pphis,pctsrf,pmflxr,pmflxs,prfl,psfl, & ! I
	4988	da,phi,phi2,d1a,dam,mp,ep,sigd,sij,clw,elij, & ! I
	4989	epmlmMm,eplaMm,upwd,dnwd,itop_con,ibas_con, & ! I
	4990	ev,wdtrainA, wdtrainM,wght_cvfd, & ! I
	4991	fm_therm, entr_therm, rneb, & ! I
	4992	beta_prec_fisrt,beta_prec, & !I
	4993	zu10m,zv10m,wstar,ale_bl,ale_wake, & ! I
	4994	d_tr_dyn,tr_seri)
	4995
	4996	#else
[3776]	4997	IF (iflag_phytrac == 1 ) THEN
	4998	CALL phytrac ( &
[2469]	4999	itap, days_elapsed+1, jH_cur, debut, &
[3435]	5000	lafin, phys_tstep, u, v, t, &
[2469]	5001	paprs, pplay, pmfu, pmfd, &
	5002	pen_u, pde_u, pen_d, pde_d, &
	5003	cdragh, coefh(1:klon,1:klev,is_ave), fm_therm, entr_therm, &
	5004	u1, v1, ftsol, pctsrf, &
	5005	zustar, zu10m, zv10m, &
	5006	wstar(:,is_ave), ale_bl, ale_wake, &
	5007	latitude_deg, longitude_deg, &
	5008	frac_impa,frac_nucl, beta_prec_fisrt,beta_prec, &
	5009	presnivs, pphis, pphi, albsol1, &
[2784]	5010	sh_in, ch_in, rhcl, cldfra, rneb, &
[4412]	5011	diafra, radocond, itop_con, ibas_con, &
[2469]	5012	pmflxr, pmflxs, prfl, psfl, &
	5013	da, phi, mp, upwd, &
	5014	phi2, d1a, dam, sij, wght_cvfd, & !<<RomP+RL
	5015	wdtrainA, wdtrainM, sigd, clw,elij, & !<<RomP
	5016	ev, ep, epmlmMm, eplaMm, & !<<RomP
	5017	dnwd, aerosol_couple, flxmass_w, &
	5018	tau_aero, piz_aero, cg_aero, ccm, &
	5019	rfname, &
	5020	d_tr_dyn, & !<<RomP
[3418]	5021	tr_seri, init_source)
[3666]	5022	#ifdef REPROBUS
	5023
	5024
	5025	print*,'avt add phys rep',abortphy
	5026
	5027	CALL add_phys_tend &
	5028	(du0,dv0,dt0,d_q_rep,d_ql_rep,d_qi_rep,paprs,&
	5029	'rep',abortphy,flag_inhib_tend,itap,0)
	5030	IF (abortphy==1) Print*,'ERROR ABORT REP'
	5031
	5032	print*,'apr add phys rep',abortphy
	5033
[2630]	5034	#endif
[3776]	5035	ENDIF ! (iflag_phytrac=1)
[3666]	5036
	5037	#endif
[3776]	5038	!ENDIF ! (iflag_phytrac=1)
[524]	5039
[2469]	5040	IF (offline) THEN
[524]	5041
[2469]	5042	IF (prt_level.ge.9) &
	5043	print*,'Attention on met a 0 les thermiques pour phystoke'
[2692]	5044	CALL phystokenc ( &
[2469]	5045	nlon,klev,pdtphys,longitude_deg,latitude_deg, &
	5046	t,pmfu, pmfd, pen_u, pde_u, pen_d, pde_d, &
	5047	fm_therm,entr_therm, &
	5048	cdragh,coefh(1:klon,1:klev,is_ave),u1,v1,ftsol,pctsrf, &
	5049	frac_impa, frac_nucl, &
[3435]	5050	pphis,cell_area,phys_tstep,itap, &
[2469]	5051	qx(:,:,ivap),da,phi,mp,upwd,dnwd)
[524]	5052
	5053
[2469]	5054	ENDIF
[524]	5055
[2469]	5056	!
	5057	! Calculer le transport de l'eau et de l'energie (diagnostique)
	5058	!
[4229]	5059	CALL transp (paprs,zxtsol, t_seri, q_seri, ql_seri, qs_seri, u_seri, v_seri, zphi, &
	5060	ue, ve, uq, vq, uwat, vwat)
[2469]	5061	!
	5062	!IM global posePB BEG
	5063	IF(1.EQ.0) THEN
	5064	!
[4229]	5065	CALL transp_lay (paprs,zxtsol, t_seri, q_seri, u_seri, v_seri, zphi, &
[2469]	5066	ve_lay, vq_lay, ue_lay, uq_lay)
	5067	!
	5068	ENDIF !(1.EQ.0) THEN
	5069	!IM global posePB END
[4229]	5070	!
[2469]	5071	! Accumuler les variables a stocker dans les fichiers histoire:
	5072	!
[1279]	5073
[2469]	5074	!================================================================
	5075	! Conversion of kinetic and potential energy into heat, for
	5076	! parameterisation of subgrid-scale motions
	5077	!================================================================
[1753]	5078
[2469]	5079	d_t_ec(:,:)=0.
	5080	forall (k=1: nbp_lev) exner(:, k) = (pplay(:, k)/paprs(:,1))**RKAPPA
[4232]	5081	CALL ener_conserv(klon,klev,pdtphys,u,v,t,qx,ivap,iliq,isol, &
[2851]	5082	u_seri,v_seri,t_seri,q_seri,ql_seri,qs_seri,pbl_tke(:,:,is_ave)-tke0(:,:), &
[2469]	5083	zmasse,exner,d_t_ec)
	5084	t_seri(:,:)=t_seri(:,:)+d_t_ec(:,:)
[1753]	5085
[2469]	5086	!=======================================================================
	5087	! SORTIES
	5088	!=======================================================================
	5089	!
	5090	!IM initialisation + calculs divers diag AMIP2
	5091	!
	5092	include "calcul_divers.h"
	5093	!
	5094	!IM Interpolation sur les niveaux de pression du NMC
	5095	! -------------------------------------------------
	5096	!
	5097	include "calcul_STDlev.h"
	5098	!
	5099	! slp sea level pressure derived from Arpege-IFS : CALL ctstar + CALL pppmer
	5100	CALL diag_slp(klon,t_seri,paprs,pplay,pphis,ptstar,pt0,slp)
	5101	!
[2496]	5102	!cc prw = eau precipitable
	5103	! prlw = colonne eau liquide
	5104	! prlw = colonne eau solide
[2499]	5105	prw(:) = 0.
	5106	prlw(:) = 0.
	5107	prsw(:) = 0.
	5108	DO k = 1, klev
	5109	prw(:) = prw(:) + q_seri(:,k)*zmasse(:,k)
	5110	prlw(:) = prlw(:) + ql_seri(:,k)*zmasse(:,k)
	5111	prsw(:) = prsw(:) + qs_seri(:,k)*zmasse(:,k)
[2469]	5112	ENDDO
	5113	!
[4389]	5114	IF (ANY(type_trac == ['inca','inco'])) THEN
[655]	5115	#ifdef INCA
[2469]	5116	CALL VTe(VTphysiq)
	5117	CALL VTb(VTinca)
[959]	5118
[2469]	5119	CALL chemhook_end ( &
[3435]	5120	phys_tstep, &
[2469]	5121	pplay, &
	5122	t_seri, &
[3872]	5123	tr_seri(:,:,1+nqCO2:nbtr), &
[2469]	5124	nbtr, &
	5125	paprs, &
	5126	q_seri, &
	5127	cell_area, &
	5128	pphi, &
	5129	pphis, &
[2832]	5130	zx_rh, &
[4127]	5131	aps, bps, ap, bp, lafin)
[959]	5132
[2469]	5133	CALL VTe(VTinca)
	5134	CALL VTb(VTphysiq)
[655]	5135	#endif
[2692]	5136	ENDIF
[655]	5137
[4389]	5138	IF (type_trac == 'repr') THEN
[4140]	5139	#ifdef REPROBUS
	5140	CALL coord_hyb_rep(paprs, pplay, aps, bps, ap, bp, cell_area)
	5141	#endif
	5142	ENDIF
[1753]	5143
[2469]	5144	!
	5145	! Convertir les incrementations en tendances
	5146	!
	5147	IF (prt_level .GE.10) THEN
	5148	print *,'Convertir les incrementations en tendances '
	5149	ENDIF
	5150	!
[2692]	5151	IF (mydebug) THEN
	5152	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	5153	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	5154	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	5155	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	5156	ENDIF
[766]	5157
[2469]	5158	DO k = 1, klev
	5159	DO i = 1, klon
[3435]	5160	d_u(i,k) = ( u_seri(i,k) - u(i,k) ) / phys_tstep
	5161	d_v(i,k) = ( v_seri(i,k) - v(i,k) ) / phys_tstep
	5162	d_t(i,k) = ( t_seri(i,k)-t(i,k) ) / phys_tstep
	5163	d_qx(i,k,ivap) = ( q_seri(i,k) - qx(i,k,ivap) ) / phys_tstep
	5164	d_qx(i,k,iliq) = ( ql_seri(i,k) - qx(i,k,iliq) ) / phys_tstep
[2469]	5165	!CR: on ajoute le contenu en glace
[4098]	5166	IF (nqo >= 3) THEN
[3435]	5167	d_qx(i,k,isol) = ( qs_seri(i,k) - qx(i,k,isol) ) / phys_tstep
[2692]	5168	ENDIF
[4059]	5169	!--ice_sursat: nqo=4, on ajoute rneb
[4098]	5170	IF (nqo == 4) THEN
[4059]	5171	d_qx(i,k,irneb) = ( rneb_seri(i,k) - qx(i,k,irneb) ) / phys_tstep
	5172	ENDIF
[2469]	5173	ENDDO
	5174	ENDDO
	5175	!
[4367]	5176	! DC: All iterations are cycled if nqtot==nqo, so no nqtot>nqo condition required
	5177	itr = 0
	5178	DO iq = 1, nqtot
	5179	IF(.NOT.tracers(iq)%isInPhysics) CYCLE
	5180	itr = itr+1
	5181	DO k = 1, klev
	5182	DO i = 1, klon
	5183	d_qx(i,k,iq) = ( tr_seri(i,k,itr) - qx(i,k,iq) ) / phys_tstep
[2469]	5184	ENDDO
	5185	ENDDO
[4367]	5186	ENDDO
[2469]	5187	!
	5188	!IM rajout diagnostiques bilan KP pour analyse MJO par Jun-Ichi Yano
	5189	!IM global posePB include "write_bilKP_ins.h"
	5190	!IM global posePB include "write_bilKP_ave.h"
	5191	!
[1412]	5192
[2489]	5193	!--OB mass fixer
	5194	!--profile is corrected to force mass conservation of water
	5195	IF (mass_fixer) THEN
	5196	qql2(:)=0.0
[2499]	5197	DO k = 1, klev
	5198	qql2(:)=qql2(:)+(q_seri(:,k)+ql_seri(:,k)+qs_seri(:,k))*zmasse(:,k)
[2489]	5199	ENDDO
	5200	DO i = 1, klon
	5201	!--compute ratio of what q+ql should be with conservation to what it is
	5202	corrqql=(qql1(i)+(evap(i)-rain_fall(i)-snow_fall(i))*pdtphys)/qql2(i)
	5203	DO k = 1, klev
	5204	q_seri(i,k) =q_seri(i,k)*corrqql
	5205	ql_seri(i,k)=ql_seri(i,k)*corrqql
	5206	ENDDO
	5207	ENDDO
	5208	ENDIF
	5209	!--fin mass fixer
	5210
[2469]	5211	! Sauvegarder les valeurs de t et q a la fin de la physique:
	5212	!
[2499]	5213	u_ancien(:,:) = u_seri(:,:)
	5214	v_ancien(:,:) = v_seri(:,:)
	5215	t_ancien(:,:) = t_seri(:,:)
	5216	q_ancien(:,:) = q_seri(:,:)
	5217	ql_ancien(:,:) = ql_seri(:,:)
	5218	qs_ancien(:,:) = qs_seri(:,:)
[4059]	5219	rneb_ancien(:,:) = rneb_seri(:,:)
[2499]	5220	CALL water_int(klon,klev,q_ancien,zmasse,prw_ancien)
	5221	CALL water_int(klon,klev,ql_ancien,zmasse,prlw_ancien)
	5222	CALL water_int(klon,klev,qs_ancien,zmasse,prsw_ancien)
[2469]	5223	! !! RomP >>>
[4056]	5224	IF (nqtot > nqo) tr_ancien(:,:,:) = tr_seri(:,:,:)
[2469]	5225	! !! RomP <<<
	5226	!==========================================================================
	5227	! Sorties des tendances pour un point particulier
	5228	! a utiliser en 1D, avec igout=1 ou en 3D sur un point particulier
	5229	! pour le debug
	5230	! La valeur de igout est attribuee plus haut dans le programme
	5231	!==========================================================================
[879]	5232
[2692]	5233	IF (prt_level.ge.1) THEN
[2469]	5234	write(lunout,*) 'FIN DE PHYSIQ !!!!!!!!!!!!!!!!!!!!'
	5235	write(lunout,*) &
	5236	'nlon,klev,nqtot,debut,lafin,jD_cur, jH_cur, pdtphys pct tlos'
	5237	write(lunout,*) &
	5238	nlon,klev,nqtot,debut,lafin, jD_cur, jH_cur ,pdtphys, &
	5239	pctsrf(igout,is_ter), pctsrf(igout,is_lic),pctsrf(igout,is_oce), &
	5240	pctsrf(igout,is_sic)
	5241	write(lunout,*) 'd_t_dyn,d_t_con,d_t_lsc,d_t_ajsb,d_t_ajs,d_t_eva'
[2692]	5242	DO k=1,klev
[2469]	5243	write(lunout,*) d_t_dyn(igout,k),d_t_con(igout,k), &
	5244	d_t_lsc(igout,k),d_t_ajsb(igout,k),d_t_ajs(igout,k), &
	5245	d_t_eva(igout,k)
[2692]	5246	ENDDO
[2469]	5247	write(lunout,*) 'cool,heat'
[2692]	5248	DO k=1,klev
[2469]	5249	write(lunout,*) cool(igout,k),heat(igout,k)
[2692]	5250	ENDDO
[879]	5251
[2469]	5252	!jyg< (En attendant de statuer sur le sort de d_t_oli)
	5253	!jyg! write(lunout,*) 'd_t_oli,d_t_vdf,d_t_oro,d_t_lif,d_t_ec'
	5254	!jyg! do k=1,klev
	5255	!jyg! write(lunout,*) d_t_oli(igout,k),d_t_vdf(igout,k), &
	5256	!jyg! d_t_oro(igout,k),d_t_lif(igout,k),d_t_ec(igout,k)
	5257	!jyg! enddo
	5258	write(lunout,*) 'd_t_vdf,d_t_oro,d_t_lif,d_t_ec'
[2692]	5259	DO k=1,klev
[2469]	5260	write(lunout,*) d_t_vdf(igout,k), &
	5261	d_t_oro(igout,k),d_t_lif(igout,k),d_t_ec(igout,k)
[2692]	5262	ENDDO
[2469]	5263	!>jyg
[879]	5264
[2469]	5265	write(lunout,*) 'd_ps ',d_ps(igout)
	5266	write(lunout,*) 'd_u, d_v, d_t, d_qx1, d_qx2 '
[2692]	5267	DO k=1,klev
[2469]	5268	write(lunout,*) d_u(igout,k),d_v(igout,k),d_t(igout,k), &
	5269	d_qx(igout,k,1),d_qx(igout,k,2)
[2692]	5270	ENDDO
	5271	ENDIF
[879]	5272
[2469]	5273	!============================================================
	5274	! Calcul de la temperature potentielle
	5275	!============================================================
	5276	DO k = 1, klev
	5277	DO i = 1, klon
	5278	!JYG/IM theta en debut du pas de temps
	5279	!JYG/IM theta(i,k)=t(i,k)(100000./pplay(i,k))*(RD/RCPD)
	5280	!JYG/IM theta en fin de pas de temps de physique
	5281	theta(i,k)=t_seri(i,k)(100000./pplay(i,k))*(RD/RCPD)
	5282	! thetal: 2 lignes suivantes a decommenter si vous avez les fichiers
	5283	! MPL 20130625
	5284	! fth_fonctions.F90 et parkind1.F90
	5285	! sinon thetal=theta
	5286	! thetal(i,k)=fth_thetal(pplay(i,k),t_seri(i,k),q_seri(i,k),
	5287	! : ql_seri(i,k))
	5288	thetal(i,k)=theta(i,k)
	5289	ENDDO
	5290	ENDDO
	5291	!
[879]	5292
[2469]	5293	! 22.03.04 BEG
	5294	!=============================================================
	5295	! Ecriture des sorties
	5296	!=============================================================
[524]	5297	#ifdef CPP_IOIPSL
	5298
[2469]	5299	! Recupere des varibles calcule dans differents modules
	5300	! pour ecriture dans histxxx.nc
[782]	5301
[2469]	5302	! Get some variables from module fonte_neige_mod
	5303	CALL fonte_neige_get_vars(pctsrf, &
[2517]	5304	zxfqcalving, zxfqfonte, zxffonte, zxrunofflic)
[782]	5305
[1507]	5306
[2469]	5307	!=============================================================
	5308	! Separation entre thermiques et non thermiques dans les sorties
	5309	! de fisrtilp
	5310	!=============================================================
[1507]	5311
[2692]	5312	IF (iflag_thermals>=1) THEN
[2469]	5313	d_t_lscth=0.
	5314	d_t_lscst=0.
	5315	d_q_lscth=0.
	5316	d_q_lscst=0.
[2692]	5317	DO k=1,klev
	5318	DO i=1,klon
	5319	IF (ptconvth(i,k)) THEN
[2469]	5320	d_t_lscth(i,k)=d_t_eva(i,k)+d_t_lsc(i,k)
	5321	d_q_lscth(i,k)=d_q_eva(i,k)+d_q_lsc(i,k)
[2692]	5322	ELSE
[2469]	5323	d_t_lscst(i,k)=d_t_eva(i,k)+d_t_lsc(i,k)
	5324	d_q_lscst(i,k)=d_q_eva(i,k)+d_q_lsc(i,k)
[2692]	5325	ENDIF
	5326	ENDDO
	5327	ENDDO
[1507]	5328
[2692]	5329	DO i=1,klon
[2469]	5330	plul_st(i)=prfl(i,lmax_th(i)+1)+psfl(i,lmax_th(i)+1)
	5331	plul_th(i)=prfl(i,1)+psfl(i,1)
[2692]	5332	ENDDO
	5333	ENDIF
[909]	5334
[2469]	5335	!On effectue les sorties:
[1791]	5336
[2630]	5337	#ifdef CPP_Dust
	5338	CALL phys_output_write_spl(itap, pdtphys, paprs, pphis, &
	5339	pplay, lmax_th, aerosol_couple, &
[3776]	5340	ok_ade, ok_aie, ivap, ok_sync, &
[2630]	5341	ptconv, read_climoz, clevSTD, &
	5342	ptconvth, d_t, qx, d_qx, d_tr_dyn, zmasse, &
	5343	flag_aerosol, flag_aerosol_strat, ok_cdnc)
	5344	#else
[2469]	5345	CALL phys_output_write(itap, pdtphys, paprs, pphis, &
	5346	pplay, lmax_th, aerosol_couple, &
[3630]	5347	ok_ade, ok_aie, ok_volcan, ivap, iliq, isol, &
[2496]	5348	ok_sync, ptconv, read_climoz, clevSTD, &
[2665]	5349	ptconvth, d_u, d_t, qx, d_qx, zmasse, &
[2469]	5350	flag_aerosol, flag_aerosol_strat, ok_cdnc)
[2630]	5351	#endif
[1791]	5352
[2651]	5353	#ifndef CPP_XIOS
[2590]	5354	CALL write_paramLMDZ_phy(itap,nid_ctesGCM,ok_sync)
[2651]	5355	#endif
[687]	5356
[524]	5357	#endif
	5358
[2469]	5359	!====================================================================
	5360	! Arret du modele apres hgardfou en cas de detection d'un
	5361	! plantage par hgardfou
	5362	!====================================================================
[2235]	5363
	5364	IF (abortphy==1) THEN
	5365	abort_message ='Plantage hgardfou'
[2311]	5366	CALL abort_physic (modname,abort_message,1)
[2235]	5367	ENDIF
	5368
[2469]	5369	! 22.03.04 END
	5370	!
	5371	!====================================================================
	5372	! Si c'est la fin, il faut conserver l'etat de redemarrage
	5373	!====================================================================
	5374	!
[782]	5375
[3981]	5376	! Disabling calls to the prt_alerte function
	5377	alert_first_call = .FALSE.
	5378
[2469]	5379	IF (lafin) THEN
	5380	itau_phy = itau_phy + itap
	5381	CALL phyredem ("restartphy.nc")
	5382	! open(97,form="unformatted",file="finbin")
	5383	! write(97) u_seri,v_seri,t_seri,q_seri
	5384	! close(97)
[3435]	5385
	5386	IF (is_omp_master) THEN
	5387
	5388	IF (read_climoz >= 1) THEN
	5389	IF (is_mpi_root) CALL nf95_close(ncid_climoz)
	5390	DEALLOCATE(press_edg_climoz) ! pointer
	5391	DEALLOCATE(press_cen_climoz) ! pointer
	5392	ENDIF
	5393
[2692]	5394	ENDIF
[3435]	5395	#ifdef CPP_XIOS
	5396	IF (is_omp_master) CALL xios_context_finalize
[4127]	5397
	5398	#ifdef INCA
[4389]	5399	if (type_trac == 'inca') then
[4127]	5400	IF (is_omp_master .and. grid_type==unstructured) THEN
	5401	CALL finalize_inca
	5402	ENDIF
	5403	endif
[3435]	5404	#endif
[4127]	5405
	5406	#endif
[3461]	5407	WRITE(lunout,*) ' physiq fin, nombre de steps ou cvpas = 1 : ', Ncvpaseq1
[2469]	5408	ENDIF
[1863]	5409
[2469]	5410	! first=.false.
[1863]	5411
[2469]	5412	END SUBROUTINE physiq
[2418]	5413
[2902]	5414	END MODULE physiq_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format