Context Navigation

physiq_mod.F90 @ 3792

Last change on this file since 3792 was 3792, checked in by evignon, 3 years ago
Ajout de INLANDSIS, nouvelle interface entre LMDZ et la neige de SISVAT Etienne, 04/01/2021
Property copyright set to Name of program: LMDZ Creation date: 1984 Version: LMDZ5 License: CeCILL version 2 Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539 See the license file in the root directory Property svn:eol-style set to `native` Property svn:keywords set to `Id`
File size: 186.7 KB

Rev	Line
[2418]	1	!
[1279]	2	! $Id: physiq_mod.F90 3792 2021-01-04 17:01:25Z evignon $
[2418]	3	!
[1862]	4	!#define IO_DEBUG
[2418]	5	MODULE physiq_mod
[766]	6
[2469]	7	IMPLICIT NONE
[2418]	8
	9	CONTAINS
	10
[2469]	11	SUBROUTINE physiq (nlon,nlev, &
	12	debut,lafin,pdtphys_, &
	13	paprs,pplay,pphi,pphis,presnivs, &
	14	u,v,rot,t,qx, &
	15	flxmass_w, &
	16	d_u, d_v, d_t, d_qx, d_ps)
[524]	17
[3776]	18	! For clarity, the "USE" section is now arranged in alphabetical order,
	19	! with a separate section for CPP keys
	20	! PLEASE try to follow this rule
	21
	22	USE ACAMA_GWD_rando_m, only: ACAMA_GWD_rando
	23	USE aero_mod
	24	USE add_phys_tend_mod, only : add_pbl_tend, add_phys_tend, diag_phys_tend, prt_enerbil, &
	25	& fl_ebil, fl_cor_ebil
[3387]	26	USE assert_m, only: assert
[3776]	27	USE change_srf_frac_mod
	28	USE conf_phys_m, only: conf_phys
	29	USE carbon_cycle_mod, ONLY : infocfields_init, RCO2_glo, carbon_cycle_rad
	30	USE CFMIP_point_locations ! IM stations CFMIP
	31	USE cmp_seri_mod
	32	USE dimphy
	33	USE etat0_limit_unstruct_mod
	34	USE FLOTT_GWD_rando_m, only: FLOTT_GWD_rando
	35	USE fonte_neige_mod, ONLY : fonte_neige_get_vars
	36	USE geometry_mod, ONLY: cell_area, latitude_deg, longitude_deg
[2469]	37	USE ioipsl, only: histbeg, histvert, histdef, histend, histsync, &
	38	histwrite, ju2ymds, ymds2ju, getin
[3776]	39	USE ioipsl_getin_p_mod, ONLY : getin_p
	40	USE indice_sol_mod
[2469]	41	USE infotrac_phy, ONLY: nqtot, nbtr, nqo, type_trac
[3776]	42	USE iophy
	43	USE limit_read_mod, ONLY : init_limit_read
[3435]	44	USE mod_grid_phy_lmdz, ONLY: nbp_lon, nbp_lat, nbp_lev, klon_glo, grid1dTo2d_glo, grid_type, unstructured
[3776]	45	USE mod_phys_lmdz_mpi_data, only: is_mpi_root
[2469]	46	USE mod_phys_lmdz_para
[3776]	47	USE netcdf95, only: nf95_close
	48	USE netcdf, only: nf90_fill_real ! IM for NMC files
	49	USE open_climoz_m, only: open_climoz ! ozone climatology from a file
	50	USE ozonecm_m, only: ozonecm ! ozone of J.-F. Royer
	51	USE pbl_surface_mod, ONLY : pbl_surface
	52	USE phyaqua_mod, only: zenang_an
	53	USE phystokenc_mod, ONLY: offline, phystokenc
	54	USE phys_cal_mod, only: year_len, mth_len, days_elapsed, jh_1jan, &
	55	year_cur, mth_cur,jD_cur, jH_cur, jD_ref, day_cur, hour
	56	!! USE phys_local_var_mod, ONLY : a long list of variables
	57	!! ==> see below, after "CPP Keys" section
	58	USE phys_state_var_mod ! Variables sauvegardees de la physique
	59	USE phys_output_mod
	60	USE phys_output_ctrlout_mod
[2469]	61	USE print_control_mod, ONLY: mydebug=>debug , lunout, prt_level
[3776]	62	USE readaerosol_mod, ONLY : init_aero_fromfile
	63	USE readaerosolstrato_m, ONLY : init_readaerosolstrato
	64	USE radlwsw_m, only: radlwsw
	65	USE regr_horiz_time_climoz_m, ONLY: regr_horiz_time_climoz
	66	USE regr_pr_time_av_m, only: regr_pr_time_av
[3792]	67	USE surface_data, ONLY : type_ocean, ok_veget, landice_opt
[3776]	68	USE time_phylmdz_mod, only: annee_ref, current_time, day_ini, day_ref, &
	69	day_step_phy, itau_phy, pdtphys, raz_date, start_time, update_time
	70	USE tracinca_mod, ONLY: config_inca
[2788]	71	USE tropopause_m, ONLY: dyn_tropopause
[3776]	72	USE vampir
	73	USE VERTICAL_LAYERS_MOD, ONLY: aps,bps, ap, bp
	74	USE write_field_phy
	75
	76	!USE cmp_seri_mod
	77	! USE add_phys_tend_mod, only : add_pbl_tend, add_phys_tend, diag_phys_tend, prt_enerbil, &
	78	! & fl_ebil, fl_cor_ebil
	79
	80	!!!!!!!!!!!!!!!!!! "USE" section for CPP keys !!!!!!!!!!!!!!!!!!!!!!!!
	81	!
	82	!
[2630]	83	#ifdef CPP_Dust
[3776]	84	USE phytracr_spl_mod, ONLY: phytracr_spl, phytracr_spl_out_init
	85	USE phys_output_write_spl_mod
	86	#else
	87	USE phytrac_mod, ONLY : phytrac_init, phytrac
	88	USE phys_output_write_mod
[2630]	89	#endif
[3776]	90
	91
	92	#ifdef REPROBUS
	93	USE CHEM_REP, ONLY : Init_chem_rep_xjour, &
	94	d_q_rep,d_ql_rep,d_qi_rep,ptrop,ttrop, &
	95	ztrop, gravit,itroprep, Z1,Z2,fac,B
	96	#endif
	97
	98
	99	#ifdef CPP_RRTM
	100	USE YOERAD, ONLY : NRADLP
	101	USE YOESW, ONLY : RSUN
	102	#endif
	103
	104
[3522]	105	#ifdef CPP_StratAer
	106	USE strataer_mod, ONLY: strataer_init
	107	#endif
[3776]	108
	109
	110	#ifdef CPP_XIOS
	111	USE xios, ONLY: xios_update_calendar, xios_context_finalize, &
	112	xios_get_field_attr, xios_field_is_active
	113	USE wxios, ONLY: missing_val, missing_val_omp
	114	#endif
	115	#ifndef CPP_XIOS
	116	USE paramLMDZ_phy_mod
	117	#endif
	118	!
	119	!
	120	!!!!!!!!!!!!!!!!!! END "USE" for CPP keys !!!!!!!!!!!!!!!!!!!!!!
	121
	122	USE phys_local_var_mod, ONLY: phys_local_var_init, phys_local_var_end, &
[2606]	123	! [Variables internes non sauvegardees de la physique]
	124	! Variables locales pour effectuer les appels en serie
	125	t_seri,q_seri,ql_seri,qs_seri,u_seri,v_seri,tr_seri, &
	126	! Dynamic tendencies (diagnostics)
	127	d_t_dyn,d_q_dyn,d_ql_dyn,d_qs_dyn,d_u_dyn,d_v_dyn,d_tr_dyn, &
	128	d_q_dyn2d,d_ql_dyn2d,d_qs_dyn2d, &
	129	! Physic tendencies
	130	d_t_con,d_q_con,d_u_con,d_v_con, &
	131	d_tr, & !! to be removed?? (jyg)
	132	d_t_wake,d_q_wake, &
	133	d_t_lwr,d_t_lw0,d_t_swr,d_t_sw0, &
	134	d_t_ajsb,d_q_ajsb, &
	135	d_t_ajs,d_q_ajs,d_u_ajs,d_v_ajs, &
	136	d_t_ajs_w,d_q_ajs_w, &
	137	d_t_ajs_x,d_q_ajs_x, &
	138	!
[2705]	139	d_t_eva,d_q_eva,d_ql_eva,d_qi_eva, &
[2606]	140	d_t_lsc,d_q_lsc,d_ql_lsc,d_qi_lsc, &
	141	d_t_lscst,d_q_lscst, &
	142	d_t_lscth,d_q_lscth, &
	143	plul_st,plul_th, &
	144	!
	145	d_t_vdf,d_q_vdf,d_u_vdf,d_v_vdf,d_t_diss, &
	146	d_ts, &
	147	!
	148	d_t_oli,d_u_oli,d_v_oli, &
	149	d_t_oro,d_u_oro,d_v_oro, &
[2897]	150	d_t_oro_gw,d_u_oro_gw,d_v_oro_gw, &
[2606]	151	d_t_lif,d_u_lif,d_v_lif, &
	152	d_t_ec, &
	153	!
	154	du_gwd_hines,dv_gwd_hines,d_t_hin, &
	155	dv_gwd_rando,dv_gwd_front, &
	156	east_gwstress,west_gwstress, &
	157	d_q_ch4, &
	158	! Special RRTM
	159	ZLWFT0_i,ZSWFT0_i,ZFLDN0, &
	160	ZFLUP0,ZFSDN0,ZFSUP0, &
	161	!
	162	topswad_aero,solswad_aero, &
	163	topswai_aero,solswai_aero, &
	164	topswad0_aero,solswad0_aero, &
	165	!LW additional
	166	toplwad_aero,sollwad_aero, &
	167	toplwai_aero,sollwai_aero, &
	168	toplwad0_aero,sollwad0_aero, &
	169	!
	170	topsw_aero,solsw_aero, &
	171	topsw0_aero,solsw0_aero, &
	172	topswcf_aero,solswcf_aero, &
	173	tausum_aero,tau3d_aero, &
[2854]	174	drytausum_aero, &
[2606]	175	!
	176	!variables CFMIP2/CMIP5
	177	topswad_aerop, solswad_aerop, &
	178	topswai_aerop, solswai_aerop, &
	179	topswad0_aerop, solswad0_aerop, &
	180	topsw_aerop, topsw0_aerop, &
	181	solsw_aerop, solsw0_aerop, &
	182	topswcf_aerop, solswcf_aerop, &
	183	!LW diagnostics
	184	toplwad_aerop, sollwad_aerop, &
	185	toplwai_aerop, sollwai_aerop, &
	186	toplwad0_aerop, sollwad0_aerop, &
	187	!
	188	ptstar, pt0, slp, &
	189	!
	190	bils, &
	191	!
	192	cldh, cldl,cldm, cldq, cldt, &
	193	JrNt, &
	194	dthmin, evap, fder, plcl, plfc, &
	195	prw, prlw, prsw, &
	196	s_lcl, s_pblh, s_pblt, s_therm, &
	197	cdragm, cdragh, &
	198	zustar, zu10m, zv10m, rh2m, qsat2m, &
	199	zq2m, zt2m, weak_inversion, &
[3489]	200	zq2m_cor,zt2m_cor,zu10m_cor,zv10m_cor, & ! pour corriger d'un bug
	201	zrh2m_cor,zqsat2m_cor, &
[2606]	202	zt2m_min_mon, zt2m_max_mon, & ! pour calcul_divers.h
	203	t2m_min_mon, t2m_max_mon, & ! pour calcul_divers.h
	204	!
	205	s_pblh_x, s_pblh_w, &
	206	s_lcl_x, s_lcl_w, &
	207	!
	208	slab_wfbils, tpot, tpote, &
	209	ue, uq, ve, vq, zxffonte, &
[3257]	210	uwat, vwat, &
[2606]	211	zxfqcalving, zxfluxlat, &
	212	zxrunofflic, &
	213	zxtsol, snow_lsc, zxfqfonte, zxqsurf, &
	214	rain_lsc, rain_num, &
	215	!
	216	sens_x, sens_w, &
	217	zxfluxlat_x, zxfluxlat_w, &
	218	!
[3179]	219	d_t_vdf_x, d_t_vdf_w, &
	220	d_q_vdf_x, d_q_vdf_w, &
[2606]	221	pbl_tke_input, &
	222	t_therm, q_therm, u_therm, v_therm, &
	223	cdragh_x, cdragh_w, &
	224	cdragm_x, cdragm_w, &
	225	kh, kh_x, kh_w, &
	226	!
[2730]	227	wake_k, &
[3080]	228	alp_wake, &
[2635]	229	wake_h, wake_omg, &
	230	! tendencies of delta T and delta q:
	231	d_deltat_wk, d_deltaq_wk, & ! due to wakes
	232	d_deltat_wk_gw, d_deltaq_wk_gw, & ! due to wake induced gravity waves
	233	d_deltat_vdf, d_deltaq_vdf, & ! due to vertical diffusion
	234	d_deltat_the, d_deltaq_the, & ! due to thermals
	235	d_deltat_ajs_cv, d_deltaq_ajs_cv, & ! due to dry adjustment of (w) before convection
	236	! tendencies of wake fractional area and wake number per unit area:
[3208]	237	d_s_wk, d_dens_a_wk, d_dens_wk, & ! due to wakes
	238	!!! d_s_vdf, d_dens_a_vdf, d_dens_vdf, & ! due to vertical diffusion
	239	!!! d_s_the, d_dens_a_the, d_dens_the, & ! due to thermals
[2635]	240	!
[3148]	241	ptconv, ratqsc, &
[2824]	242	wbeff, convoccur, zmax_th, &
[2606]	243	sens, flwp, fiwp, &
[3080]	244	alp_bl_conv,alp_bl_det, &
[2606]	245	alp_bl_fluct_m,alp_bl_fluct_tke, &
	246	alp_bl_stat, n2, s2, &
	247	proba_notrig, random_notrig, &
[3208]	248	cv_gen, &
[2606]	249	!
[3134]	250	dnwd0, &
	251	omega, &
[2606]	252	epmax_diag, &
[3134]	253	! Deep convective variables used in phytrac
	254	pmflxr, pmflxs, &
[3496]	255	wdtrainA, wdtrainS, wdtrainM, &
[3134]	256	upwd, dnwd, &
[2606]	257	ep, &
[3134]	258	da, mp, &
	259	phi, &
	260	wght_cvfd, &
	261	phi2, &
	262	d1a, dam, &
	263	ev, &
	264	elij, &
[3496]	265	qtaa, &
[3134]	266	clw, &
	267	epmlmMm, eplaMm, &
	268	sij, &
[3387]	269	!
[2606]	270	cldemi, &
	271	cldfra, cldtau, fiwc, &
	272	fl, re, flwc, &
	273	ref_liq, ref_ice, theta, &
	274	ref_liq_pi, ref_ice_pi, &
[3780]	275	zphi, zx_rh, zx_rhl, zx_rhi, &
[2606]	276	pmfd, pmfu, &
	277	!
	278	t2m, fluxlat, &
	279	fsollw, evap_pot, &
	280	fsolsw, wfbils, wfbilo, &
[2670]	281	wfevap, wfrain, wfsnow, &
[3134]	282	prfl, psfl, fraca, Vprecip, &
[2606]	283	zw2, &
[3387]	284	!
[2606]	285	fluxu, fluxv, &
	286	fluxt, &
[3387]	287	!
[2606]	288	uwriteSTD, vwriteSTD, & !pour calcul_STDlev.h
	289	wwriteSTD, phiwriteSTD, & !pour calcul_STDlev.h
	290	qwriteSTD, twriteSTD, rhwriteSTD, & !pour calcul_STDlev.h
[3387]	291	!
[2606]	292	beta_prec, &
	293	rneb, &
[2968]	294	zxsnow,snowhgt,qsnow,to_ice,sissnow,runoff,albsol3_lic
[2606]	295	!
[2630]	296
[782]	297
[3387]	298	IMPLICIT NONE
[2469]	299	!>======================================================================
	300	!!
	301	!! Auteur(s) Z.X. Li (LMD/CNRS) date: 19930818
	302	!!
	303	!! Objet: Moniteur general de la physique du modele
	304	!!AA Modifications quant aux traceurs :
	305	!!AA - uniformisation des parametrisations ds phytrac
	306	!!AA - stockage des moyennes des champs necessaires
	307	!!AA en mode traceur off-line
	308	!!======================================================================
	309	!! CLEFS CPP POUR LES IO
	310	!! =====================
[1352]	311	#define histNMC
[2469]	312	!!======================================================================
	313	!! modif ( P. Le Van , 12/10/98 )
	314	!!
	315	!! Arguments:
	316	!!
	317	!! nlon----input-I-nombre de points horizontaux
	318	!! nlev----input-I-nombre de couches verticales, doit etre egale a klev
	319	!! debut---input-L-variable logique indiquant le premier passage
	320	!! lafin---input-L-variable logique indiquant le dernier passage
	321	!! jD_cur -R-jour courant a l'appel de la physique (jour julien)
	322	!! jH_cur -R-heure courante a l'appel de la physique (jour julien)
	323	!! pdtphys-input-R-pas d'integration pour la physique (seconde)
	324	!! paprs---input-R-pression pour chaque inter-couche (en Pa)
	325	!! pplay---input-R-pression pour le mileu de chaque couche (en Pa)
	326	!! pphi----input-R-geopotentiel de chaque couche (g z) (reference sol)
	327	!! pphis---input-R-geopotentiel du sol
	328	!! presnivs-input_R_pressions approximat. des milieux couches ( en PA)
	329	!! u-------input-R-vitesse dans la direction X (de O a E) en m/s
	330	!! v-------input-R-vitesse Y (de S a N) en m/s
	331	!! t-------input-R-temperature (K)
	332	!! qx------input-R-humidite specifique (kg/kg) et d'autres traceurs
	333	!! d_t_dyn-input-R-tendance dynamique pour "t" (K/s)
	334	!! d_q_dyn-input-R-tendance dynamique pour "q" (kg/kg/s)
[2496]	335	!! d_ql_dyn-input-R-tendance dynamique pour "ql" (kg/kg/s)
	336	!! d_qs_dyn-input-R-tendance dynamique pour "qs" (kg/kg/s)
[2469]	337	!! flxmass_w -input-R- flux de masse verticale
	338	!! d_u-----output-R-tendance physique de "u" (m/s/s)
	339	!! d_v-----output-R-tendance physique de "v" (m/s/s)
	340	!! d_t-----output-R-tendance physique de "t" (K/s)
	341	!! d_qx----output-R-tendance physique de "qx" (kg/kg/s)
	342	!! d_ps----output-R-tendance physique de la pression au sol
	343	!!======================================================================
	344	integer jjmp1
	345	! parameter (jjmp1=jjm+1-1/jjm) ! => (jjmp1=nbp_lat-1/(nbp_lat-1))
	346	! integer iip1
	347	! parameter (iip1=iim+1)
[782]	348
[2469]	349	include "regdim.h"
	350	include "dimsoil.h"
	351	include "clesphys.h"
	352	include "thermcell.h"
[3011]	353	include "dimpft.h"
[2469]	354	!======================================================================
[3479]	355	LOGICAL, SAVE :: ok_volcan ! pour activer les diagnostics volcaniques
[3600]	356	!$OMP THREADPRIVATE(ok_volcan)
[2469]	357	LOGICAL ok_cvl ! pour activer le nouveau driver pour convection KE
	358	PARAMETER (ok_cvl=.TRUE.)
	359	LOGICAL ok_gust ! pour activer l'effet des gust sur flux surface
	360	PARAMETER (ok_gust=.FALSE.)
[3600]	361	INTEGER, SAVE :: iflag_radia ! active ou non le rayonnement (MPL)
[2469]	362	!$OMP THREADPRIVATE(iflag_radia)
	363	!======================================================================
	364	LOGICAL check ! Verifier la conservation du modele en eau
	365	PARAMETER (check=.FALSE.)
	366	LOGICAL ok_stratus ! Ajouter artificiellement les stratus
	367	PARAMETER (ok_stratus=.FALSE.)
	368	!======================================================================
	369	REAL amn, amx
	370	INTEGER igout
	371	!======================================================================
[3317]	372	! Clef iflag_cycle_diurne controlant l'activation du cycle diurne:
[2469]	373	! en attente du codage des cles par Fred
[3317]	374	! iflag_cycle_diurne est initialise par conf_phys et se trouve
	375	! dans clesphys.h (IM)
[2469]	376	!======================================================================
	377	! Modele thermique du sol, a activer pour le cycle diurne:
	378	!cc LOGICAL soil_model
	379	!cc PARAMETER (soil_model=.FALSE.)
	380	!======================================================================
	381	! Dans les versions precedentes, l'eau liquide nuageuse utilisee dans
	382	! le calcul du rayonnement est celle apres la precipitation des nuages.
	383	! Si cette cle new_oliq est activee, ce sera une valeur moyenne entre
	384	! la condensation et la precipitation. Cette cle augmente les impacts
	385	! radiatifs des nuages.
	386	!cc LOGICAL new_oliq
	387	!cc PARAMETER (new_oliq=.FALSE.)
	388	!======================================================================
	389	! Clefs controlant deux parametrisations de l'orographie:
	390	!c LOGICAL ok_orodr
	391	!cc PARAMETER (ok_orodr=.FALSE.)
	392	!cc LOGICAL ok_orolf
	393	!cc PARAMETER (ok_orolf=.FALSE.)
	394	!======================================================================
	395	LOGICAL ok_journe ! sortir le fichier journalier
[3461]	396	SAVE ok_journe
[2469]	397	!$OMP THREADPRIVATE(ok_journe)
	398	!
	399	LOGICAL ok_mensuel ! sortir le fichier mensuel
[3461]	400	SAVE ok_mensuel
[2469]	401	!$OMP THREADPRIVATE(ok_mensuel)
	402	!
	403	LOGICAL ok_instan ! sortir le fichier instantane
[3461]	404	SAVE ok_instan
[2469]	405	!$OMP THREADPRIVATE(ok_instan)
	406	!
	407	LOGICAL ok_LES ! sortir le fichier LES
[3461]	408	SAVE ok_LES
[2469]	409	!$OMP THREADPRIVATE(ok_LES)
	410	!
	411	LOGICAL callstats ! sortir le fichier stats
[3461]	412	SAVE callstats
[2469]	413	!$OMP THREADPRIVATE(callstats)
	414	!
	415	LOGICAL ok_region ! sortir le fichier regional
	416	PARAMETER (ok_region=.FALSE.)
	417	!======================================================================
[3461]	418	REAL seuil_inversion
	419	SAVE seuil_inversion
[2469]	420	!$OMP THREADPRIVATE(seuil_inversion)
[3461]	421	INTEGER iflag_ratqs
	422	SAVE iflag_ratqs
[2469]	423	!$OMP THREADPRIVATE(iflag_ratqs)
	424	real facteur
[1507]	425
[2469]	426	REAL wmax_th(klon)
	427	REAL tau_overturning_th(klon)
[878]	428
[3461]	429	INTEGER lmax_th(klon)
	430	INTEGER limbas(klon)
	431	REAL ratqscth(klon,klev)
	432	REAL ratqsdiff(klon,klev)
	433	REAL zqsatth(klon,klev)
[878]	434
[2469]	435	!======================================================================
	436	!
	437	INTEGER ivap ! indice de traceurs pour vapeur d'eau
	438	PARAMETER (ivap=1)
	439	INTEGER iliq ! indice de traceurs pour eau liquide
	440	PARAMETER (iliq=2)
	441	!CR: on ajoute la phase glace
	442	INTEGER isol ! indice de traceurs pour eau glace
	443	PARAMETER (isol=3)
	444	!
	445	!
	446	! Variables argument:
	447	!
	448	INTEGER nlon
	449	INTEGER nlev
	450	REAL,INTENT(IN) :: pdtphys_
	451	! NB: pdtphys to be used in physics is in time_phylmdz_mod
	452	LOGICAL debut, lafin
	453	REAL paprs(klon,klev+1)
	454	REAL pplay(klon,klev)
	455	REAL pphi(klon,klev)
	456	REAL pphis(klon)
	457	REAL presnivs(klev)
[2799]	458	!JLD REAL znivsig(klev)
	459	!JLD real pir
[719]	460
[2469]	461	REAL u(klon,klev)
	462	REAL v(klon,klev)
[2333]	463
[2469]	464	REAL, intent(in):: rot(klon, klev)
	465	! relative vorticity, in s-1, needed for frontal waves
[2333]	466
[2469]	467	REAL t(klon,klev),thetal(klon,klev)
	468	! thetal: ligne suivante a decommenter si vous avez les fichiers
	469	! MPL 20130625
	470	! fth_fonctions.F90 et parkind1.F90
	471	! sinon thetal=theta
	472	! REAL fth_thetae,fth_thetav,fth_thetal
	473	REAL qx(klon,klev,nqtot)
	474	REAL flxmass_w(klon,klev)
	475	REAL d_u(klon,klev)
	476	REAL d_v(klon,klev)
	477	REAL d_t(klon,klev)
	478	REAL d_qx(klon,klev,nqtot)
	479	REAL d_ps(klon)
[2897]	480	! variables pour tend_to_tke
	481	REAL duadd(klon,klev)
	482	REAL dvadd(klon,klev)
	483	REAL dtadd(klon,klev)
	484
[2271]	485	#ifndef CPP_XIOS
[2997]	486	REAL, SAVE :: missing_val=nf90_fill_real
[2271]	487	#endif
[3134]	488	!! Variables moved to phys_local_var_mod
	489	!! ! Variables pour le transport convectif
	490	!! real da(klon,klev),phi(klon,klev,klev),mp(klon,klev)
	491	!! real wght_cvfd(klon,klev)
	492	!! ! Variables pour le lessivage convectif
	493	!! ! RomP >>>
	494	!! real phi2(klon,klev,klev)
	495	!! real d1a(klon,klev),dam(klon,klev)
	496	!! real ev(klon,klev)
	497	!! real clw(klon,klev),elij(klon,klev,klev)
	498	!! real epmlmMm(klon,klev,klev),eplaMm(klon,klev)
	499	!! ! RomP <<<
[2469]	500	!IM definition dynamique o_trac dans phys_output_open
	501	! type(ctrl_out) :: o_trac(nqtot)
[524]	502
[2469]	503	! variables a une pression donnee
	504	!
	505	include "declare_STDlev.h"
	506	!
	507	!
	508	include "radopt.h"
	509	!
	510	!
	511	INTEGER debug
	512	INTEGER n
	513	!ym INTEGER npoints
	514	!ym PARAMETER(npoints=klon)
	515	!
	516	INTEGER nregISCtot
	517	PARAMETER(nregISCtot=1)
	518	!
	519	! imin_debut, nbpti, jmin_debut, nbptj : parametres pour sorties
	520	! sur 1 region rectangulaire y compris pour 1 point
	521	! imin_debut : indice minimum de i; nbpti : nombre de points en
	522	! direction i (longitude)
	523	! jmin_debut : indice minimum de j; nbptj : nombre de points en
	524	! direction j (latitude)
[2799]	525	!JLD INTEGER imin_debut, nbpti
	526	!JLD INTEGER jmin_debut, nbptj
[2469]	527	!IM: region='3d' <==> sorties en global
	528	CHARACTER*3 region
	529	PARAMETER(region='3d')
[3461]	530	LOGICAL ok_hf
[2469]	531	!
[3461]	532	SAVE ok_hf
[2469]	533	!$OMP THREADPRIVATE(ok_hf)
[524]	534
[3461]	535	INTEGER, PARAMETER :: longcles=20
	536	REAL, SAVE :: clesphy0(longcles)
[2469]	537	!$OMP THREADPRIVATE(clesphy0)
	538	!
	539	! Variables propres a la physique
[3461]	540	INTEGER, SAVE :: itap ! compteur pour la physique
[2469]	541	!$OMP THREADPRIVATE(itap)
[2235]	542
[2469]	543	INTEGER, SAVE :: abortphy=0 ! Reprere si on doit arreter en fin de phys
	544	!$OMP THREADPRIVATE(abortphy)
	545	!
[3461]	546	REAL,SAVE :: solarlong0
[2469]	547	!$OMP THREADPRIVATE(solarlong0)
[987]	548
[2469]	549	!
	550	! Parametres de l'Orographie a l'Echelle Sous-Maille (OESM):
	551	!
	552	!IM 141004 REAL zulow(klon),zvlow(klon),zustr(klon), zvstr(klon)
	553	REAL zulow(klon),zvlow(klon)
	554	!
	555	INTEGER igwd,idx(klon),itest(klon)
	556	!
	557	! REAL,allocatable,save :: run_off_lic_0(:)
	558	! !$OMP THREADPRIVATE(run_off_lic_0)
	559	!ym SAVE run_off_lic_0
	560	!KE43
	561	! Variables liees a la convection de K. Emanuel (sb):
	562	!
[3461]	563	REAL, SAVE :: bas, top ! cloud base and top levels
[2469]	564	!$OMP THREADPRIVATE(bas, top)
	565	!------------------------------------------------------------------
	566	! Upmost level reached by deep convection and related variable (jyg)
	567	!
	568	INTEGER izero
	569	INTEGER k_upper_cv
	570	!------------------------------------------------------------------
[3153]	571	! Compteur de l'occurence de cvpas=1
	572	INTEGER Ncvpaseq1
	573	SAVE Ncvpaseq1
	574	!$OMP THREADPRIVATE(Ncvpaseq1)
[2469]	575	!
	576	!==========================================================================
	577	!CR04.12.07: on ajoute les nouvelles variables du nouveau schema
	578	!de convection avec poches froides
	579	! Variables li\'ees \`a la poche froide (jyg)
[879]	580
[3496]	581	!! REAL mipsh(klon,klev) ! mass flux shed by the adiab ascent at each level
	582	!! Moved to phys_state_var_mod
[2469]	583	!
	584	REAL wape_prescr, fip_prescr
	585	INTEGER it_wape_prescr
	586	SAVE wape_prescr, fip_prescr, it_wape_prescr
	587	!$OMP THREADPRIVATE(wape_prescr, fip_prescr, it_wape_prescr)
	588	!
	589	! variables supplementaires de concvl
	590	REAL Tconv(klon,klev)
[3134]	591	!! variable moved to phys_local_var_mod
	592	!! REAL sij(klon,klev,klev)
[2812]	593	!! !
	594	!! ! variables pour tester la conservation de l'energie dans concvl
	595	!! REAL, DIMENSION(klon,klev) :: d_t_con_sat
	596	!! REAL, DIMENSION(klon,klev) :: d_q_con_sat
	597	!! REAL, DIMENSION(klon,klev) :: dql_sat
[970]	598
[3461]	599	REAL, SAVE :: alp_bl_prescr=0.
	600	REAL, SAVE :: ale_bl_prescr=0.
	601	REAL, SAVE :: wake_s_min_lsp=0.1
[2469]	602	!$OMP THREADPRIVATE(alp_bl_prescr,ale_bl_prescr)
	603	!$OMP THREADPRIVATE(wake_s_min_lsp)
[970]	604
[3461]	605	REAL ok_wk_lsp(klon)
[1516]	606
[2469]	607	!RC
	608	! Variables li\'ees \`a la poche froide (jyg et rr)
[879]	609
[2635]	610	INTEGER, SAVE :: iflag_wake_tend ! wake: if =0, then wake state variables are
	611	! updated within calwake
	612	!$OMP THREADPRIVATE(iflag_wake_tend)
[3000]	613	INTEGER, SAVE :: iflag_alp_wk_cond=0 ! wake: if =0, then Alp_wk is the average lifting
	614	! power provided by the wakes; else, Alp_wk is the
	615	! lifting power conditionned on the presence of a
	616	! gust-front in the grid cell.
	617	!$OMP THREADPRIVATE(iflag_alp_wk_cond)
[3489]	618
[3490]	619	INTEGER, SAVE :: iflag_bug_t2m_ipslcm61=1 !
[3489]	620	!$OMP THREADPRIVATE(iflag_bug_t2m_ipslcm61)
[3490]	621	INTEGER, SAVE :: iflag_bug_t2m_stab_ipslcm61=-1 !
[3489]	622	!$OMP THREADPRIVATE(iflag_bug_t2m_stab_ipslcm61)
	623
[2635]	624	REAL t_w(klon,klev),q_w(klon,klev) ! temperature and moisture profiles in the wake region
	625	REAL t_x(klon,klev),q_x(klon,klev) ! temperature and moisture profiles in the off-wake region
[879]	626
[2469]	627	REAL wake_dth(klon,klev) ! wake : temp pot difference
[879]	628
[2469]	629	REAL wake_omgbdth(klon,klev) ! Wake : flux of Delta_Theta
	630	! transported by LS omega
	631	REAL wake_dp_omgb(klon,klev) ! Wake : vertical gradient of
	632	! large scale omega
	633	REAL wake_dtKE(klon,klev) ! Wake : differential heating
	634	! (wake - unpertubed) CONV
	635	REAL wake_dqKE(klon,klev) ! Wake : differential moistening
	636	! (wake - unpertubed) CONV
	637	REAL wake_dp_deltomg(klon,klev) ! Wake : gradient vertical de wake_omg
	638	REAL wake_spread(klon,klev) ! spreading term in wake_delt
	639	!
	640	!pourquoi y'a pas de save??
	641	!
[2730]	642	!!! INTEGER, SAVE, DIMENSION(klon) :: wake_k
	643	!!! !$OMP THREADPRIVATE(wake_k)
[2469]	644	!
	645	!jyg<
	646	!cc REAL wake_pe(klon) ! Wake potential energy - WAPE
	647	!>jyg
[879]	648
[3000]	649	REAL wake_fip_0(klon) ! Average Front Incoming Power (unconditionned)
[2469]	650	REAL wake_gfl(klon) ! Gust Front Length
[2635]	651	!!! REAL wake_dens(klon) ! moved to phys_state_var_mod
[2469]	652	!
	653	!
	654	REAL dt_dwn(klon,klev)
	655	REAL dq_dwn(klon,klev)
	656	REAL M_dwn(klon,klev)
	657	REAL M_up(klon,klev)
	658	REAL dt_a(klon,klev)
	659	REAL dq_a(klon,klev)
	660	REAL d_t_adjwk(klon,klev) !jyg
	661	REAL d_q_adjwk(klon,klev) !jyg
	662	LOGICAL,SAVE :: ok_adjwk=.FALSE.
	663	!$OMP THREADPRIVATE(ok_adjwk)
[2882]	664	INTEGER,SAVE :: iflag_adjwk=0 !jyg
	665	!$OMP THREADPRIVATE(iflag_adjwk) !jyg
[2657]	666	REAL,SAVE :: oliqmax=999.,oicemax=999.
	667	!$OMP THREADPRIVATE(oliqmax,oicemax)
[2469]	668	REAL, SAVE :: alp_offset
	669	!$OMP THREADPRIVATE(alp_offset)
[3150]	670	REAL, SAVE :: dtcon_multistep_max=1.e6
	671	!$OMP THREADPRIVATE(dtcon_multistep_max)
	672	REAL, SAVE :: dqcon_multistep_max=1.e6
	673	!$OMP THREADPRIVATE(dqcon_multistep_max)
	674
[2897]	675
[2469]	676	!
	677	!RR:fin declarations poches froides
	678	!==========================================================================
[1032]	679
[2469]	680	REAL ztv(klon,klev),ztva(klon,klev)
	681	REAL zpspsk(klon,klev)
	682	REAL ztla(klon,klev),zqla(klon,klev)
	683	REAL zthl(klon,klev)
[1638]	684
[2469]	685	!cc nrlmd le 10/04/2012
[1638]	686
[2469]	687	!--------Stochastic Boundary Layer Triggering: ALE_BL--------
	688	!---Propri\'et\'es du thermiques au LCL
	689	real zlcl_th(klon) ! Altitude du LCL calcul\'e
	690	! continument (pcon dans
	691	! thermcell_main.F90)
	692	real fraca0(klon) ! Fraction des thermiques au LCL
	693	real w0(klon) ! Vitesse des thermiques au LCL
	694	real w_conv(klon) ! Vitesse verticale de grande \'echelle au LCL
	695	real tke0(klon,klev+1) ! TKE au d\'ebut du pas de temps
	696	real therm_tke_max0(klon) ! TKE dans les thermiques au LCL
	697	real env_tke_max0(klon) ! TKE dans l'environnement au LCL
[1638]	698
[2799]	699	!JLD !---D\'eclenchement stochastique
	700	!JLD integer :: tau_trig(klon)
[1638]	701
[2469]	702	REAL,SAVE :: random_notrig_max=1.
	703	!$OMP THREADPRIVATE(random_notrig_max)
[2294]	704
[2469]	705	!--------Statistical Boundary Layer Closure: ALP_BL--------
	706	!---Profils de TKE dans et hors du thermique
	707	real therm_tke_max(klon,klev) ! Profil de TKE dans les thermiques
	708	real env_tke_max(klon,klev) ! Profil de TKE dans l'environnement
[1638]	709
[2897]	710	!-------Activer les tendances de TKE due a l'orograp??ie---------
	711	INTEGER, SAVE :: addtkeoro
	712	!$OMP THREADPRIVATE(addtkeoro)
	713	REAL, SAVE :: alphatkeoro
	714	!$OMP THREADPRIVATE(alphatkeoro)
	715	LOGICAL, SAVE :: smallscales_tkeoro
	716	!$OMP THREADPRIVATE(smallscales_tkeoro)
[1638]	717
[2897]	718
	719
[2469]	720	!cc fin nrlmd le 10/04/2012
[782]	721
[2469]	722	! Variables locales pour la couche limite (al1):
	723	!
	724	!Al1 REAL pblh(klon) ! Hauteur de couche limite
	725	!Al1 SAVE pblh
	726	!34EK
	727	!
	728	! Variables locales:
	729	!
	730	!AA
	731	!AA Pour phytrac
	732	REAL u1(klon) ! vents dans la premiere couche U
	733	REAL v1(klon) ! vents dans la premiere couche V
[524]	734
[2469]	735	!@$$ LOGICAL offline ! Controle du stockage ds "physique"
	736	!@$$ PARAMETER (offline=.false.)
	737	!@$$ INTEGER physid
	738	REAL frac_impa(klon,klev) ! fractions d'aerosols lessivees (impaction)
	739	REAL frac_nucl(klon,klev) ! idem (nucleation)
	740	! RomP >>>
	741	REAL beta_prec_fisrt(klon,klev) ! taux de conv de l'eau cond (fisrt)
	742	! RomP <<<
[2832]	743	REAL :: calday
[2068]	744
[2469]	745	!IM cf FH pour Tiedtke 080604
	746	REAL rain_tiedtke(klon),snow_tiedtke(klon)
	747	!
	748	!IM 050204 END
	749	REAL devap(klon) ! evaporation et sa derivee
	750	REAL dsens(klon) ! chaleur sensible et sa derivee
[1279]	751
[2469]	752	!
	753	! Conditions aux limites
	754	!
	755	!
	756	REAL :: day_since_equinox
	757	! Date de l'equinoxe de printemps
	758	INTEGER, parameter :: mth_eq=3, day_eq=21
	759	REAL :: jD_eq
[1279]	760
[3461]	761	LOGICAL, parameter :: new_orbit = .TRUE.
[524]	762
[2469]	763	!
	764	INTEGER lmt_pas
	765	SAVE lmt_pas ! frequence de mise a jour
	766	!$OMP THREADPRIVATE(lmt_pas)
	767	real zmasse(klon, nbp_lev),exner(klon, nbp_lev)
	768	! (column-density of mass of air in a cell, in kg m-2)
	769	real, parameter:: dobson_u = 2.1415e-05 ! Dobson unit, in kg m-2
[1797]	770
[2469]	771	!IM sorties
	772	REAL un_jour
	773	PARAMETER(un_jour=86400.)
	774	INTEGER itapm1 !pas de temps de la physique du(es) mois precedents
	775	SAVE itapm1 !mis a jour le dernier pas de temps du mois en cours
	776	!$OMP THREADPRIVATE(itapm1)
	777	!======================================================================
	778	!
	779	! Declaration des procedures appelees
	780	!
	781	EXTERNAL angle ! calculer angle zenithal du soleil
	782	EXTERNAL alboc ! calculer l'albedo sur ocean
	783	EXTERNAL ajsec ! ajustement sec
	784	EXTERNAL conlmd ! convection (schema LMD)
	785	!KE43
	786	EXTERNAL conema3 ! convect4.3
	787	EXTERNAL fisrtilp ! schema de condensation a grande echelle (pluie)
	788	!AA
	789	! JBM (3/14) fisrtilp_tr not loaded
	790	! EXTERNAL fisrtilp_tr ! schema de condensation a grande echelle (pluie)
	791	! ! stockage des coefficients necessaires au
	792	! ! lessivage OFF-LINE et ON-LINE
	793	EXTERNAL hgardfou ! verifier les temperatures
	794	EXTERNAL nuage ! calculer les proprietes radiatives
	795	!C EXTERNAL o3cm ! initialiser l'ozone
	796	EXTERNAL orbite ! calculer l'orbite terrestre
	797	EXTERNAL phyetat0 ! lire l'etat initial de la physique
	798	EXTERNAL phyredem ! ecrire l'etat de redemarrage de la physique
	799	EXTERNAL suphel ! initialiser certaines constantes
	800	EXTERNAL transp ! transport total de l'eau et de l'energie
	801	!IM
	802	EXTERNAL haut2bas !variables de haut en bas
	803	EXTERNAL ini_undefSTD !initialise a 0 une variable a 1 niveau de pression
	804	EXTERNAL undefSTD !somme les valeurs definies d'1 var a 1 niveau de pression
	805	! EXTERNAL moy_undefSTD !moyenne d'1 var a 1 niveau de pression
	806	! EXTERNAL moyglo_aire
	807	! moyenne globale d'1 var ponderee par l'aire de la maille (moyglo_pondaire)
	808	! par la masse/airetot (moyglo_pondaima) et la vraie masse (moyglo_pondmass)
	809	!
	810	!
	811	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	812	! Local variables
	813	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	814	!
	815	REAL rhcl(klon,klev) ! humiditi relative ciel clair
	816	REAL dialiq(klon,klev) ! eau liquide nuageuse
	817	REAL diafra(klon,klev) ! fraction nuageuse
	818	REAL cldliq(klon,klev) ! eau liquide nuageuse
	819	!
	820	!XXX PB
	821	REAL fluxq(klon,klev, nbsrf) ! flux turbulent d'humidite
	822	!
	823	REAL zxfluxt(klon, klev)
	824	REAL zxfluxq(klon, klev)
	825	REAL zxfluxu(klon, klev)
	826	REAL zxfluxv(klon, klev)
[1797]	827
[2469]	828	! Le rayonnement n'est pas calcule tous les pas, il faut donc
	829	! sauvegarder les sorties du rayonnement
	830	!ym SAVE heat,cool,albpla,topsw,toplw,solsw,sollw,sollwdown
	831	!ym SAVE sollwdownclr, toplwdown, toplwdownclr
	832	!ym SAVE topsw0,toplw0,solsw0,sollw0, heat0, cool0
	833	!
	834	INTEGER itaprad
	835	SAVE itaprad
	836	!$OMP THREADPRIVATE(itaprad)
	837	!
	838	REAL conv_q(klon,klev) ! convergence de l'humidite (kg/kg/s)
	839	REAL conv_t(klon,klev) ! convergence de la temperature(K/s)
	840	!
[2799]	841	#ifdef INCA
[2469]	842	REAL zxsnow_dummy(klon)
[2799]	843	#endif
[2469]	844	REAL zsav_tsol(klon)
	845	!
	846	REAL dist, rmu0(klon), fract(klon)
	847	REAL zrmu0(klon), zfract(klon)
	848	REAL zdtime, zdtime1, zdtime2, zlongi
	849	!
	850	REAL qcheck
	851	REAL z_avant(klon), z_apres(klon), z_factor(klon)
	852	LOGICAL zx_ajustq
	853	!
[2799]	854	REAL za
	855	REAL zx_t, zx_qs, zdelta, zcor
[2469]	856	real zqsat(klon,klev)
	857	!
[2897]	858	INTEGER i, k, iq, j, nsrf, ll, l
[2469]	859	!
	860	REAL t_coup
	861	PARAMETER (t_coup=234.0)
[1797]	862
[2469]	863	!ym A voir plus tard !!
	864	!ym REAL zx_relief(iim,jjmp1)
	865	!ym REAL zx_aire(iim,jjmp1)
	866	!
	867	! Grandeurs de sorties
	868	REAL s_capCL(klon)
	869	REAL s_oliqCL(klon), s_cteiCL(klon)
	870	REAL s_trmb1(klon), s_trmb2(klon)
	871	REAL s_trmb3(klon)
[2707]	872
	873	! La convection n'est pas calculee tous les pas, il faut donc
	874	! sauvegarder les sorties de la convection
	875	!ym SAVE
	876	!ym SAVE
	877	!ym SAVE
	878	!
[2730]	879	INTEGER itapcv, itapwk
	880	SAVE itapcv, itapwk
	881	!$OMP THREADPRIVATE(itapcv, itapwk)
[2707]	882
[2469]	883	!KE43
	884	! Variables locales pour la convection de K. Emanuel (sb):
[524]	885
[2469]	886	REAL tvp(klon,klev) ! virtual temp of lifted parcel
	887	CHARACTER*40 capemaxcels !max(CAPE)
[1412]	888
[2469]	889	REAL rflag(klon) ! flag fonctionnement de convect
	890	INTEGER iflagctrl(klon) ! flag fonctionnement de convect
[904]	891
[2469]	892	! -- convect43:
	893	INTEGER ntra ! nb traceurs pour convect4.3
	894	REAL dtvpdt1(klon,klev), dtvpdq1(klon,klev)
	895	REAL dplcldt(klon), dplcldr(klon)
	896	!? . condm_con(klon,klev),conda_con(klon,klev),
	897	!? . mr_con(klon,klev),ep_con(klon,klev)
	898	!? . ,sadiab(klon,klev),wadiab(klon,klev)
	899	! --
	900	!34EK
	901	!
	902	! Variables du changement
	903	!
	904	! con: convection
	905	! lsc: condensation a grande echelle (Large-Scale-Condensation)
	906	! ajs: ajustement sec
	907	! eva: evaporation de l'eau liquide nuageuse
	908	! vdf: couche limite (Vertical DiFfusion)
[2611]	909	!
[2469]	910	! tendance nulles
[2812]	911	REAL, dimension(klon,klev):: du0, dv0, dt0, dq0, dql0, dqi0
	912	REAL, dimension(klon) :: dsig0, ddens0
	913	INTEGER, dimension(klon) :: wkoccur1
[2801]	914	! tendance buffer pour appel de add_phys_tend
	915	REAL, DIMENSION(klon,klev) :: d_q_ch4_dtime
[2611]	916	!
	917	! Flag pour pouvoir ne pas ajouter les tendances.
	918	! Par defaut, les tendances doivente etre ajoutees et
	919	! flag_inhib_tend = 0
	920	! flag_inhib_tend > 0 : tendances non ajoutees, avec un nombre
	921	! croissant de print quand la valeur du flag augmente
	922	!!! attention, ce flag doit etre change avec prudence !!!
	923	INTEGER :: flag_inhib_tend = 0 ! 0 is the default value
	924	!! INTEGER :: flag_inhib_tend = 2
[3134]	925	!
	926	! Logical switch to a bug : reseting to 0 convective variables at the
	927	! begining of physiq.
	928	LOGICAL, SAVE :: ok_bug_cv_trac = .TRUE.
	929	!$OMP THREADPRIVATE(ok_bug_cv_trac)
[3180]	930	!
	931	! Logical switch to a bug : changing wake_deltat when thermals are active
	932	! even when there are no wakes.
	933	LOGICAL, SAVE :: ok_bug_split_th = .TRUE.
	934	!$OMP THREADPRIVATE(ok_bug_split_th)
[524]	935
[2469]	936	!
	937	!********************************************************
	938	! declarations
[524]	939
[2469]	940	!********************************************************
	941	!IM 081204 END
	942	!
	943	REAL pen_u(klon,klev), pen_d(klon,klev)
	944	REAL pde_u(klon,klev), pde_d(klon,klev)
	945	INTEGER kcbot(klon), kctop(klon), kdtop(klon)
	946	!
[3461]	947	REAL ratqsbas,ratqshaut,tau_ratqs
	948	SAVE ratqsbas,ratqshaut,tau_ratqs
[2469]	949	!$OMP THREADPRIVATE(ratqsbas,ratqshaut,tau_ratqs)
[2534]	950	REAL, SAVE :: ratqsp0=50000., ratqsdp=20000.
	951	!$OMP THREADPRIVATE(ratqsp0, ratqsdp)
[644]	952
[2469]	953	! Parametres lies au nouveau schema de nuages (SB, PDF)
[3461]	954	REAL, SAVE :: fact_cldcon
	955	REAL, SAVE :: facttemps
	956	!$OMP THREADPRIVATE(fact_cldcon,facttemps)
	957	LOGICAL, SAVE :: ok_newmicro
[2469]	958	!$OMP THREADPRIVATE(ok_newmicro)
[524]	959
[3461]	960	INTEGER, SAVE :: iflag_cld_th
[2469]	961	!$OMP THREADPRIVATE(iflag_cld_th)
[2877]	962	!IM logical ptconv(klon,klev) !passe dans phys_local_var_mod
[2469]	963	!IM cf. AM 081204 BEG
[3461]	964	LOGICAL ptconvth(klon,klev)
[2469]	965	!IM cf. AM 081204 END
	966	!
	967	! Variables liees a l'ecriture de la bande histoire physique
	968	!
	969	!======================================================================
	970	!
	971	!
[2799]	972	!JLD integer itau_w ! pas de temps ecriture = itap + itau_phy
[2469]	973	!
	974	!
	975	! Variables locales pour effectuer les appels en serie
	976	!
	977	!IM RH a 2m (la surface)
	978	REAL Lheat
[524]	979
[2469]	980	INTEGER length
	981	PARAMETER ( length = 100 )
	982	REAL tabcntr0( length )
	983	!
[2799]	984	!JLD INTEGER ndex2d(nbp_lon*nbp_lat)
[2469]	985	!IM
	986	!
	987	!IM AMIP2 BEG
[2799]	988	!JLD REAL moyglo, mountor
[2469]	989	!IM 141004 BEG
	990	REAL zustrdr(klon), zvstrdr(klon)
	991	REAL zustrli(klon), zvstrli(klon)
	992	REAL zustrph(klon), zvstrph(klon)
	993	REAL aam, torsfc
	994	!IM 141004 END
	995	!IM 190504 BEG
	996	! INTEGER imp1jmp1
	997	! PARAMETER(imp1jmp1=(iim+1)*jjmp1)
	998	!ym A voir plus tard
	999	! REAL zx_tmp((nbp_lon+1)*nbp_lat)
	1000	! REAL airedyn(nbp_lon+1,nbp_lat)
	1001	!IM 190504 END
[2799]	1002	!JLD LOGICAL ok_msk
	1003	!JLD REAL msk(klon)
[2469]	1004	!ym A voir plus tard
	1005	!ym REAL zm_wo(jjmp1, klev)
	1006	!IM AMIP2 END
	1007	!
	1008	REAL zx_tmp_fi2d(klon) ! variable temporaire grille physique
	1009	REAL zx_tmp_fi3d(klon,klev) ! variable temporaire pour champs 3D
[2799]	1010	!JLD REAL zx_tmp_2d(nbp_lon,nbp_lat)
	1011	!JLD REAL zx_lon(nbp_lon,nbp_lat)
	1012	!JLD REAL zx_lat(nbp_lon,nbp_lat)
[2469]	1013	!
[2630]	1014	INTEGER nid_ctesGCM
	1015	SAVE nid_ctesGCM
	1016	!$OMP THREADPRIVATE(nid_ctesGCM)
[2469]	1017	!
	1018	!IM 280405 BEG
	1019	! INTEGER nid_bilKPins, nid_bilKPave
	1020	! SAVE nid_bilKPins, nid_bilKPave
	1021	! !$OMP THREADPRIVATE(nid_bilKPins, nid_bilKPave)
	1022	!
	1023	REAL ve_lay(klon,klev) ! transport meri. de l'energie a chaque niveau vert.
	1024	REAL vq_lay(klon,klev) ! transport meri. de l'eau a chaque niveau vert.
	1025	REAL ue_lay(klon,klev) ! transport zonal de l'energie a chaque niveau vert.
	1026	REAL uq_lay(klon,klev) ! transport zonal de l'eau a chaque niveau vert.
	1027	!
[2799]	1028	!JLD REAL zjulian
	1029	!JLD SAVE zjulian
	1030	!JLD!$OMP THREADPRIVATE(zjulian)
[2590]	1031
[2799]	1032	!JLD INTEGER nhori, nvert
	1033	!JLD REAL zsto
	1034	!JLD REAL zstophy, zout
[2068]	1035
[3461]	1036	CHARACTER*20 modname
	1037	CHARACTER*80 abort_message
	1038	LOGICAL, SAVE :: ok_sync, ok_sync_omp
[2469]	1039	!$OMP THREADPRIVATE(ok_sync)
[3461]	1040	REAL date0
[524]	1041
[2469]	1042	! essai writephys
[3461]	1043	INTEGER fid_day, fid_mth, fid_ins
	1044	PARAMETER (fid_ins = 1, fid_day = 2, fid_mth = 3)
	1045	INTEGER prof2d_on, prof3d_on, prof2d_av, prof3d_av
	1046	PARAMETER (prof2d_on = 1, prof3d_on = 2, prof2d_av = 3, prof3d_av = 4)
[2469]	1047	REAL ztsol(klon)
	1048	REAL q2m(klon,nbsrf) ! humidite a 2m
[524]	1049
[2469]	1050	!IM: t2m, q2m, ustar, u10m, v10m et t2mincels, t2maxcels
	1051	CHARACTER*40 t2mincels, t2maxcels !t2m min., t2m max
[2799]	1052	CHARACTER*40 tinst, tave
[2469]	1053	REAL cldtaupi(klon,klev) ! Cloud optical thickness for
	1054	! pre-industrial (pi) aerosols
[524]	1055
[2863]	1056	INTEGER :: naero
[2469]	1057	! Aerosol optical properties
	1058	CHARACTER*4, DIMENSION(naero_grp) :: rfname
	1059	REAL, DIMENSION(klon,klev) :: mass_solu_aero ! total mass
	1060	! concentration
	1061	! for all soluble
	1062	! aerosols[ug/m3]
	1063	REAL, DIMENSION(klon,klev) :: mass_solu_aero_pi
	1064	! - " - (pre-industrial value)
[1279]	1065
[2469]	1066	! Parameters
	1067	LOGICAL ok_ade, ok_aie ! Apply aerosol (in)direct effects or not
[2738]	1068	LOGICAL ok_alw ! Apply aerosol LW effect or not
[2469]	1069	LOGICAL ok_cdnc ! ok cloud droplet number concentration (O. Boucher 01-2013)
	1070	REAL bl95_b0, bl95_b1 ! Parameter in Boucher and Lohmann (1995)
[2738]	1071	SAVE ok_ade, ok_aie, ok_alw, ok_cdnc, bl95_b0, bl95_b1
	1072	!$OMP THREADPRIVATE(ok_ade, ok_aie, ok_alw, ok_cdnc, bl95_b0, bl95_b1)
[2469]	1073	LOGICAL, SAVE :: aerosol_couple ! true : calcul des aerosols dans INCA
	1074	! false : lecture des aerosol dans un fichier
	1075	!$OMP THREADPRIVATE(aerosol_couple)
[3338]	1076	LOGICAL, SAVE :: chemistry_couple ! true : use INCA chemistry O3
	1077	! false : use offline chemistry O3
	1078	!$OMP THREADPRIVATE(chemistry_couple)
[2469]	1079	INTEGER, SAVE :: flag_aerosol
	1080	!$OMP THREADPRIVATE(flag_aerosol)
[2644]	1081	LOGICAL, SAVE :: flag_bc_internal_mixture
	1082	!$OMP THREADPRIVATE(flag_bc_internal_mixture)
[2469]	1083	!
	1084	!--STRAT AEROSOL
[2530]	1085	INTEGER, SAVE :: flag_aerosol_strat
[2469]	1086	!$OMP THREADPRIVATE(flag_aerosol_strat)
[3412]	1087	!
	1088	!--INTERACTIVE AEROSOL FEEDBACK ON RADIATION
	1089	LOGICAL, SAVE :: flag_aer_feedback
	1090	!$OMP THREADPRIVATE(flag_aer_feedback)
	1091
[2469]	1092	!c-fin STRAT AEROSOL
	1093	!
	1094	! Declaration des constantes et des fonctions thermodynamiques
	1095	!
[3461]	1096	LOGICAL,SAVE :: first=.TRUE.
[2469]	1097	!$OMP THREADPRIVATE(first)
[1279]	1098
[2788]	1099	! VARIABLES RELATED TO OZONE CLIMATOLOGIES ; all are OpenMP shared
	1100	! Note that pressure vectors are in Pa and in stricly ascending order
	1101	INTEGER,SAVE :: read_climoz ! Read ozone climatology
[2469]	1102	! (let it keep the default OpenMP shared attribute)
	1103	! Allowed values are 0, 1 and 2
	1104	! 0: do not read an ozone climatology
	1105	! 1: read a single ozone climatology that will be used day and night
	1106	! 2: read two ozone climatologies, the average day and night
	1107	! climatology and the daylight climatology
[2788]	1108	INTEGER,SAVE :: ncid_climoz ! NetCDF file identifier
	1109	REAL, POINTER, SAVE :: press_cen_climoz(:) ! Pressure levels
	1110	REAL, POINTER, SAVE :: press_edg_climoz(:) ! Edges of pressure intervals
	1111	REAL, POINTER, SAVE :: time_climoz(:) ! Time vector
	1112	CHARACTER(LEN=13), PARAMETER :: vars_climoz(2) &
	1113	= ["tro3 ","tro3_daylight"]
	1114	! vars_climoz(1:read_climoz): variables names in climoz file.
[2819]	1115	! vars_climoz(1:read_climoz-2) if read_climoz>2 (temporary)
	1116	REAL :: ro3i ! 0<=ro3i<=360 ; required time index in NetCDF file for
	1117	! the ozone fields, old method.
[1279]	1118
[2469]	1119	include "YOMCST.h"
	1120	include "YOETHF.h"
	1121	include "FCTTRE.h"
	1122	!IM 100106 BEG : pouvoir sortir les ctes de la physique
	1123	include "conema3.h"
	1124	include "fisrtilp.h"
	1125	include "nuage.h"
	1126	include "compbl.h"
	1127	!IM 100106 END : pouvoir sortir les ctes de la physique
	1128	!
	1129	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1130	! Declarations pour Simulateur COSP
	1131	!============================================================
[3511]	1132	real :: mr_ozone(klon,klev), phicosp(klon,klev)
[3370]	1133
[2469]	1134	!IM stations CFMIP
	1135	INTEGER, SAVE :: nCFMIP
	1136	!$OMP THREADPRIVATE(nCFMIP)
	1137	INTEGER, PARAMETER :: npCFMIP=120
	1138	INTEGER, ALLOCATABLE, SAVE :: tabCFMIP(:)
	1139	REAL, ALLOCATABLE, SAVE :: lonCFMIP(:), latCFMIP(:)
	1140	!$OMP THREADPRIVATE(tabCFMIP, lonCFMIP, latCFMIP)
	1141	INTEGER, ALLOCATABLE, SAVE :: tabijGCM(:)
	1142	REAL, ALLOCATABLE, SAVE :: lonGCM(:), latGCM(:)
	1143	!$OMP THREADPRIVATE(tabijGCM, lonGCM, latGCM)
	1144	INTEGER, ALLOCATABLE, SAVE :: iGCM(:), jGCM(:)
	1145	!$OMP THREADPRIVATE(iGCM, jGCM)
	1146	logical, dimension(nfiles) :: phys_out_filestations
	1147	logical, parameter :: lNMC=.FALSE.
[1539]	1148
[2469]	1149	!IM betaCRF
	1150	REAL, SAVE :: pfree, beta_pbl, beta_free
	1151	!$OMP THREADPRIVATE(pfree, beta_pbl, beta_free)
	1152	REAL, SAVE :: lon1_beta, lon2_beta, lat1_beta, lat2_beta
	1153	!$OMP THREADPRIVATE(lon1_beta, lon2_beta, lat1_beta, lat2_beta)
	1154	LOGICAL, SAVE :: mskocean_beta
	1155	!$OMP THREADPRIVATE(mskocean_beta)
	1156	REAL, dimension(klon, klev) :: beta ! facteur sur cldtaurad et
	1157	! cldemirad pour evaluer les
	1158	! retros liees aux CRF
	1159	REAL, dimension(klon, klev) :: cldtaurad ! epaisseur optique
	1160	! pour radlwsw pour
	1161	! tester "CRF off"
	1162	REAL, dimension(klon, klev) :: cldtaupirad ! epaisseur optique
	1163	! pour radlwsw pour
	1164	! tester "CRF off"
	1165	REAL, dimension(klon, klev) :: cldemirad ! emissivite pour
	1166	! radlwsw pour tester
	1167	! "CRF off"
	1168	REAL, dimension(klon, klev) :: cldfrarad ! fraction nuageuse
[1735]	1169
[3418]	1170	#ifdef INCA
	1171	! set de variables utilisees pour l'initialisation des valeurs provenant de INCA
	1172	REAL, DIMENSION(klon,klev,naero_grp,nbands) :: init_tauinca
	1173	REAL, DIMENSION(klon,klev,naero_grp,nbands) :: init_pizinca
	1174	REAL, DIMENSION(klon,klev,naero_grp,nbands) :: init_cginca
	1175	REAL, DIMENSION(klon,klev,nbands) :: init_ccminca
	1176	#endif
	1177	REAL, DIMENSION(klon,nbtr) :: init_source
	1178
[3048]	1179	!lwoff=y : offset LW CRE for radiation code and other schemes
	1180	REAL, SAVE :: betalwoff
	1181	!OMP THREADPRIVATE(betalwoff)
	1182	!
[2469]	1183	INTEGER :: nbtr_tmp ! Number of tracer inside concvl
	1184	REAL, dimension(klon,klev) :: sh_in ! Specific humidity entering in phytrac
[2784]	1185	REAL, dimension(klon,klev) :: ch_in ! Condensed humidity entering in phytrac (eau liquide)
[2469]	1186	integer iostat
[1539]	1187
[2469]	1188	REAL zzz
	1189	!albedo SB >>>
[3461]	1190	REAL,DIMENSION(6), SAVE :: SFRWL
[3435]	1191	!$OMP THREADPRIVATE(SFRWL)
[2469]	1192	!albedo SB <<<
[1955]	1193
[2485]	1194	!--OB variables for mass fixer (hard coded for now)
[3461]	1195	LOGICAL, PARAMETER :: mass_fixer=.FALSE.
	1196	REAL qql1(klon),qql2(klon),corrqql
[2476]	1197
[3110]	1198	REAL pi
	1199
	1200	pi = 4. * ATAN(1.)
	1201
[2469]	1202	! Ehouarn: set value of jjmp1 since it is no longer a "fixed parameter"
	1203	jjmp1=nbp_lat
[2344]	1204
[2469]	1205	!======================================================================
	1206	! Gestion calendrier : mise a jour du module phys_cal_mod
	1207	!
	1208	pdtphys=pdtphys_
	1209	CALL update_time(pdtphys)
[3435]	1210	phys_tstep=NINT(pdtphys)
	1211	#ifdef CPP_XIOS
	1212	IF (.NOT. debut .AND. is_omp_master) CALL xios_update_calendar(itap+1)
	1213	#endif
[1355]	1214
[2469]	1215	!======================================================================
	1216	! Ecriture eventuelle d'un profil verticale en entree de la physique.
	1217	! Utilise notamment en 1D mais peut etre active egalement en 3D
	1218	! en imposant la valeur de igout.
	1219	!======================================================================d
[2692]	1220	IF (prt_level.ge.1) THEN
[2469]	1221	igout=klon/2+1/klon
	1222	write(lunout,*) 'DEBUT DE PHYSIQ !!!!!!!!!!!!!!!!!!!!'
	1223	write(lunout,*) 'igout, lat, lon ',igout, latitude_deg(igout), &
	1224	longitude_deg(igout)
	1225	write(lunout,*) &
	1226	'nlon,klev,nqtot,debut,lafin, jD_cur, jH_cur,pdtphys'
	1227	write(lunout,*) &
	1228	nlon,klev,nqtot,debut,lafin, jD_cur, jH_cur,pdtphys
[879]	1229
[2469]	1230	write(lunout,*) 'paprs, play, phi, u, v, t'
[2692]	1231	DO k=1,klev
[2469]	1232	write(lunout,*) paprs(igout,k),pplay(igout,k),pphi(igout,k), &
	1233	u(igout,k),v(igout,k),t(igout,k)
[2692]	1234	ENDDO
[2469]	1235	write(lunout,*) 'ovap (g/kg), oliq (g/kg)'
[2692]	1236	DO k=1,klev
[2469]	1237	write(lunout,) qx(igout,k,1)1000,qx(igout,k,2)*1000.
[2692]	1238	ENDDO
	1239	ENDIF
[879]	1240
[2769]	1241	! Quick check on pressure levels:
[3461]	1242	CALL assert(paprs(:, nbp_lev + 1) < paprs(:, nbp_lev), &
[2769]	1243	"physiq_mod paprs bad order")
[879]	1244
[2692]	1245	IF (first) THEN
[3435]	1246	CALL init_etat0_limit_unstruct
	1247	IF (.NOT. create_etat0_limit) CALL init_limit_read(days_elapsed)
[2469]	1248	!CR:nvelles variables convection/poches froides
	1249
[3461]	1250	WRITE(lunout,*) '================================================='
	1251	WRITE(lunout,*) 'Allocation des variables locales et sauvegardees'
	1252	WRITE(lunout,*) '================================================='
[2692]	1253	CALL phys_local_var_init
[2469]	1254	!
	1255	! appel a la lecture du run.def physique
[2692]	1256	CALL conf_phys(ok_journe, ok_mensuel, &
[2469]	1257	ok_instan, ok_hf, &
	1258	ok_LES, &
	1259	callstats, &
	1260	solarlong0,seuil_inversion, &
	1261	fact_cldcon, facttemps,ok_newmicro,iflag_radia, &
	1262	iflag_cld_th,iflag_ratqs,ratqsbas,ratqshaut,tau_ratqs, &
[3479]	1263	ok_ade, ok_aie, ok_alw, ok_cdnc, ok_volcan, aerosol_couple, &
	1264	chemistry_couple, &
[3630]	1265	flag_aerosol, flag_aerosol_strat, flag_aer_feedback, &
[2644]	1266	flag_bc_internal_mixture, bl95_b0, bl95_b1, &
[2469]	1267	! nv flags pour la convection et les
	1268	! poches froides
	1269	read_climoz, &
	1270	alp_offset)
[2692]	1271	CALL phys_state_var_init(read_climoz)
	1272	CALL phys_output_var_init
[3522]	1273	IF (read_climoz>=1 .AND. create_etat0_limit .AND. grid_type==unstructured) &
	1274	CALL regr_horiz_time_climoz(read_climoz,ok_daily_climoz)
[3435]	1275
[3522]	1276	#ifdef CPP_StratAer
	1277	CALL strataer_init
	1278	#endif
	1279
[2469]	1280	print*, '================================================='
	1281	!
	1282	!CR: check sur le nb de traceurs de l eau
[2692]	1283	IF ((iflag_ice_thermo.gt.0).and.(nqo==2)) THEN
[2469]	1284	WRITE (lunout, *) ' iflag_ice_thermo==1 requires 3 H2O tracers ', &
	1285	'(H2Ov, H2Ol, H2Oi) but nqo=', nqo, '. Might as well stop here.'
[3531]	1286	abort_message='see above'
	1287	CALL abort_physic(modname,abort_message,1)
[2692]	1288	ENDIF
[2224]	1289
[3154]	1290	Ncvpaseq1 = 0
[2469]	1291	dnwd0=0.0
	1292	ftd=0.0
	1293	fqd=0.0
	1294	cin=0.
	1295	!ym Attention pbase pas initialise dans concvl !!!!
	1296	pbase=0
	1297	!IM 180608
[904]	1298
[2469]	1299	itau_con=0
[3461]	1300	first=.FALSE.
[1797]	1301
[2692]	1302	ENDIF ! first
[1797]	1303
[2469]	1304	!ym => necessaire pour iflag_con != 2
	1305	pmfd(:,:) = 0.
	1306	pen_u(:,:) = 0.
	1307	pen_d(:,:) = 0.
	1308	pde_d(:,:) = 0.
	1309	pde_u(:,:) = 0.
	1310	aam=0.
	1311	d_t_adjwk(:,:)=0
	1312	d_q_adjwk(:,:)=0
[1797]	1313
[2469]	1314	alp_bl_conv(:)=0.
[2245]	1315
[2469]	1316	torsfc=0.
	1317	forall (k=1: nbp_lev) zmasse(:, k) = (paprs(:, k)-paprs(:, k+1)) / rg
[1797]	1318
[2469]	1319	modname = 'physiq'
[644]	1320
[2469]	1321	IF (debut) THEN
	1322	CALL suphel ! initialiser constantes et parametres phys.
[3327]	1323	! tau_gl : constante de rappel de la temperature a la surface de la glace - en
	1324	tau_gl=5.
	1325	CALL getin_p('tau_gl', tau_gl)
	1326	! tau_gl : constante de rappel de la temperature a la surface de la glace - en
	1327	! secondes
	1328	tau_gl=86400.*tau_gl
[3461]	1329	WRITE(lunout,*) 'debut physiq_mod tau_gl=',tau_gl
	1330
[3490]	1331	iflag_bug_t2m_ipslcm61 = 1
[3489]	1332	CALL getin_p('iflag_bug_t2m_ipslcm61', iflag_bug_t2m_ipslcm61)
[3490]	1333	iflag_bug_t2m_stab_ipslcm61 = -1
[3489]	1334	CALL getin_p('iflag_bug_t2m_stab_ipslcm61', iflag_bug_t2m_stab_ipslcm61)
	1335
[3000]	1336	CALL getin_p('iflag_alp_wk_cond', iflag_alp_wk_cond)
[2469]	1337	CALL getin_p('random_notrig_max',random_notrig_max)
[2882]	1338	CALL getin_p('ok_adjwk',ok_adjwk)
	1339	IF (ok_adjwk) iflag_adjwk=2 ! for compatibility with older versions
	1340	! iflag_adjwk: ! 0 = Default: no convective adjustment of w-region
	1341	! 1 => convective adjustment but state variables are unchanged
	1342	! 2 => convective adjustment and state variables are changed
	1343	CALL getin_p('iflag_adjwk',iflag_adjwk)
[3150]	1344	CALL getin_p('dtcon_multistep_max',dtcon_multistep_max)
	1345	CALL getin_p('dqcon_multistep_max',dqcon_multistep_max)
[2613]	1346	CALL getin_p('oliqmax',oliqmax)
[2657]	1347	CALL getin_p('oicemax',oicemax)
[2534]	1348	CALL getin_p('ratqsp0',ratqsp0)
	1349	CALL getin_p('ratqsdp',ratqsdp)
[2635]	1350	iflag_wake_tend = 0
	1351	CALL getin_p('iflag_wake_tend',iflag_wake_tend)
[2799]	1352	ok_bad_ecmwf_thermo=.TRUE. ! By default thermodynamical constants are set
	1353	! in rrtm/suphec.F90 (and rvtmp2 is set to 0).
	1354	CALL getin_p('ok_bad_ecmwf_thermo',ok_bad_ecmwf_thermo)
[3134]	1355	CALL getin_p('ok_bug_cv_trac',ok_bug_cv_trac)
[3180]	1356	CALL getin_p('ok_bug_split_th',ok_bug_split_th)
[2799]	1357	fl_ebil = 0 ! by default, conservation diagnostics are desactivated
	1358	CALL getin_p('fl_ebil',fl_ebil)
	1359	fl_cor_ebil = 0 ! by default, no correction to ensure energy conservation
	1360	CALL getin_p('fl_cor_ebil',fl_cor_ebil)
[2984]	1361	iflag_phytrac = 1 ! by default we do want to call phytrac
[2973]	1362	CALL getin_p('iflag_phytrac',iflag_phytrac)
[3776]	1363	#ifdef CPP_Dust
	1364	IF (iflag_phytrac.EQ.0) THEN
	1365	WRITE(lunout,*) 'In order to run with SPLA, iflag_phytrac will be forced to 1'
	1366	iflag_phytrac = 1
	1367	ENDIF
	1368	#endif
[3011]	1369	nvm_lmdz = 13
	1370	CALL getin_p('NVM',nvm_lmdz)
[3387]	1371
[3461]	1372	WRITE(lunout,*) 'iflag_alp_wk_cond=', iflag_alp_wk_cond
	1373	WRITE(lunout,*) 'random_ntrig_max=', random_notrig_max
	1374	WRITE(lunout,*) 'ok_adjwk=', ok_adjwk
	1375	WRITE(lunout,*) 'iflag_adjwk=', iflag_adjwk
	1376	WRITE(lunout,*) 'qtcon_multistep_max=',dtcon_multistep_max
	1377	WRITE(lunout,*) 'qdcon_multistep_max=',dqcon_multistep_max
	1378	WRITE(lunout,*) 'ratqsp0=', ratqsp0
	1379	WRITE(lunout,*) 'ratqsdp=', ratqsdp
	1380	WRITE(lunout,*) 'iflag_wake_tend=', iflag_wake_tend
	1381	WRITE(lunout,*) 'ok_bad_ecmwf_thermo=',ok_bad_ecmwf_thermo
	1382	WRITE(lunout,*) 'ok_bug_cv_trac=', ok_bug_cv_trac
	1383	WRITE(lunout,*) 'ok_bug_split_th=', ok_bug_split_th
	1384	WRITE(lunout,*) 'fl_ebil=', fl_ebil
	1385	WRITE(lunout,*) 'fl_cor_ebil=', fl_cor_ebil
	1386	WRITE(lunout,*) 'iflag_phytrac=', iflag_phytrac
	1387	WRITE(lunout,*) 'NVM=', nvm_lmdz
	1388
[3387]	1389	!--PC: defining fields to be exchanged between LMDz, ORCHIDEE and NEMO
	1390	WRITE(lunout,*) 'Call to infocfields from physiq'
	1391	CALL infocfields_init
	1392
[2469]	1393	ENDIF
[878]	1394
[2692]	1395	IF (prt_level.ge.1) print *,'CONVERGENCE PHYSIQUE THERM 1 '
[1279]	1396
[2469]	1397	!======================================================================
	1398	! Gestion calendrier : mise a jour du module phys_cal_mod
	1399	!
	1400	! CALL phys_cal_update(jD_cur,jH_cur)
[1279]	1401
[2469]	1402	!
	1403	! Si c'est le debut, il faut initialiser plusieurs choses
	1404	! ********
	1405	!
	1406	IF (debut) THEN
	1407	!rv CRinitialisation de wght_th et lalim_conv pour la
	1408	!definition de la couche alimentation de la convection a partir
	1409	!des caracteristiques du thermique
	1410	wght_th(:,:)=1.
	1411	lalim_conv(:)=1
	1412	!RC
	1413	ustar(:,:)=0.
[2569]	1414	! u10m(:,:)=0.
	1415	! v10m(:,:)=0.
[2469]	1416	rain_con(:)=0.
	1417	snow_con(:)=0.
	1418	topswai(:)=0.
	1419	topswad(:)=0.
	1420	solswai(:)=0.
	1421	solswad(:)=0.
[959]	1422
[2469]	1423	wmax_th(:)=0.
	1424	tau_overturning_th(:)=0.
[645]	1425
[2469]	1426	IF (type_trac == 'inca') THEN
	1427	! jg : initialisation jusqu'au ces variables sont dans restart
	1428	ccm(:,:,:) = 0.
	1429	tau_aero(:,:,:,:) = 0.
	1430	piz_aero(:,:,:,:) = 0.
	1431	cg_aero(:,:,:,:) = 0.
[2372]	1432
[2469]	1433	config_inca='none' ! default
	1434	CALL getin_p('config_inca',config_inca)
[2372]	1435
[2469]	1436	ELSE
	1437	config_inca='none' ! default
[2692]	1438	ENDIF
[782]	1439
[3435]	1440	tau_aero(:,:,:,:) = 1.e-15
	1441	piz_aero(:,:,:,:) = 1.
	1442	cg_aero(:,:,:,:) = 0.
	1443
[2469]	1444	IF (aerosol_couple .AND. (config_inca /= "aero" &
	1445	.AND. config_inca /= "aeNP ")) THEN
	1446	abort_message &
	1447	= 'if aerosol_couple is activated, config_inca need to be ' &
	1448	// 'aero or aeNP'
	1449	CALL abort_physic (modname,abort_message,1)
	1450	ENDIF
[2443]	1451
[2469]	1452	rnebcon0(:,:) = 0.0
	1453	clwcon0(:,:) = 0.0
	1454	rnebcon(:,:) = 0.0
	1455	clwcon(:,:) = 0.0
[1863]	1456
[2469]	1457	!
	1458	print*,'iflag_coupl,iflag_clos,iflag_wake', &
	1459	iflag_coupl,iflag_clos,iflag_wake
[3317]	1460	print*,'iflag_cycle_diurne', iflag_cycle_diurne
[2469]	1461	!
	1462	IF (iflag_con.EQ.2.AND.iflag_cld_th.GT.-1) THEN
	1463	abort_message = 'Tiedtke needs iflag_cld_th=-2 or -1'
	1464	CALL abort_physic (modname,abort_message,1)
	1465	ENDIF
	1466	!
	1467	!
	1468	! Initialiser les compteurs:
	1469	!
	1470	itap = 0
	1471	itaprad = 0
[2707]	1472	itapcv = 0
[2730]	1473	itapwk = 0
[878]	1474
[2469]	1475	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1476	!! Un petit travail \`a faire ici.
	1477	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[878]	1478
[2692]	1479	IF (iflag_pbl>1) THEN
[2469]	1480	PRINT*, "Using method MELLOR&YAMADA"
[2692]	1481	ENDIF
[956]	1482
[2469]	1483	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1484	! FH 2008/05/02 changement lie a la lecture de nbapp_rad dans
	1485	! phylmd plutot que dyn3d
	1486	! Attention : la version precedente n'etait pas tres propre.
	1487	! Il se peut qu'il faille prendre une valeur differente de nbapp_rad
	1488	! pour obtenir le meme resultat.
[2731]	1489	!jyg for fh<
[3435]	1490	WRITE(lunout,*) 'Pas de temps phys_tstep pdtphys ',phys_tstep,pdtphys
	1491	IF (abs(phys_tstep-pdtphys)>1.e-10) THEN
[2731]	1492	abort_message='pas de temps doit etre entier en seconde pour orchidee et XIOS'
	1493	CALL abort_physic(modname,abort_message,1)
	1494	ENDIF
	1495	!>jyg
[3435]	1496	IF (MOD(NINT(86400./phys_tstep),nbapp_rad).EQ.0) THEN
	1497	radpas = NINT( 86400./phys_tstep)/nbapp_rad
[2469]	1498	ELSE
	1499	WRITE(lunout,*) 'le nombre de pas de temps physique doit etre un ', &
	1500	'multiple de nbapp_rad'
	1501	WRITE(lunout,*) 'changer nbapp_rad ou alors commenter ce test ', &
	1502	'mais 1+1<>2'
	1503	abort_message='nbre de pas de temps physique n est pas multiple ' &
	1504	// 'de nbapp_rad'
[2692]	1505	CALL abort_physic(modname,abort_message,1)
[2469]	1506	ENDIF
[3435]	1507	IF (nbapp_cv .EQ. 0) nbapp_cv=86400./phys_tstep
	1508	IF (nbapp_wk .EQ. 0) nbapp_wk=86400./phys_tstep
[2730]	1509	print *,'physiq, nbapp_cv, nbapp_wk ',nbapp_cv,nbapp_wk
[3435]	1510	IF (MOD(NINT(86400./phys_tstep),nbapp_cv).EQ.0) THEN
	1511	cvpas_0 = NINT( 86400./phys_tstep)/nbapp_cv
[3150]	1512	cvpas = cvpas_0
[2707]	1513	print *,'physiq, cvpas ',cvpas
	1514	ELSE
	1515	WRITE(lunout,*) 'le nombre de pas de temps physique doit etre un ', &
	1516	'multiple de nbapp_cv'
	1517	WRITE(lunout,*) 'changer nbapp_cv ou alors commenter ce test ', &
	1518	'mais 1+1<>2'
	1519	abort_message='nbre de pas de temps physique n est pas multiple ' &
	1520	// 'de nbapp_cv'
[3461]	1521	CALL abort_physic(modname,abort_message,1)
[2707]	1522	ENDIF
[3435]	1523	IF (MOD(NINT(86400./phys_tstep),nbapp_wk).EQ.0) THEN
	1524	wkpas = NINT( 86400./phys_tstep)/nbapp_wk
[3457]	1525	! print *,'physiq, wkpas ',wkpas
[2730]	1526	ELSE
	1527	WRITE(lunout,*) 'le nombre de pas de temps physique doit etre un ', &
	1528	'multiple de nbapp_wk'
	1529	WRITE(lunout,*) 'changer nbapp_wk ou alors commenter ce test ', &
	1530	'mais 1+1<>2'
	1531	abort_message='nbre de pas de temps physique n est pas multiple ' &
	1532	// 'de nbapp_wk'
[3461]	1533	CALL abort_physic(modname,abort_message,1)
[2730]	1534	ENDIF
[2469]	1535	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[3465]	1536	CALL init_iophy_new(latitude_deg,longitude_deg)
[3777]	1537	CALL create_etat0_limit_unstruct
	1538	CALL phyetat0 ("startphy.nc",clesphy0,tabcntr0)
[524]	1539
[3435]	1540	!===================================================================
	1541	!IM stations CFMIP
	1542	nCFMIP=npCFMIP
	1543	OPEN(98,file='npCFMIP_param.data',status='old', &
	1544	form='formatted',iostat=iostat)
	1545	IF (iostat == 0) THEN
	1546	READ(98,*,end=998) nCFMIP
	1547	998 CONTINUE
	1548	CLOSE(98)
	1549	CONTINUE
	1550	IF(nCFMIP.GT.npCFMIP) THEN
	1551	print*,'nCFMIP > npCFMIP : augmenter npCFMIP et recompiler'
	1552	CALL abort_physic("physiq", "", 1)
	1553	ELSE
	1554	print*,'physiq npCFMIP=',npCFMIP,'nCFMIP=',nCFMIP
	1555	ENDIF
	1556
	1557	!
	1558	ALLOCATE(tabCFMIP(nCFMIP))
	1559	ALLOCATE(lonCFMIP(nCFMIP), latCFMIP(nCFMIP))
	1560	ALLOCATE(tabijGCM(nCFMIP))
	1561	ALLOCATE(lonGCM(nCFMIP), latGCM(nCFMIP))
	1562	ALLOCATE(iGCM(nCFMIP), jGCM(nCFMIP))
	1563	!
	1564	! lecture des nCFMIP stations CFMIP, de leur numero
	1565	! et des coordonnees geographiques lonCFMIP, latCFMIP
	1566	!
	1567	CALL read_CFMIP_point_locations(nCFMIP, tabCFMIP, &
	1568	lonCFMIP, latCFMIP)
	1569	!
	1570	! identification des
	1571	! 1) coordonnees lonGCM, latGCM des points CFMIP dans la
	1572	! grille de LMDZ
	1573	! 2) indices points tabijGCM de la grille physique 1d sur
	1574	! klon points
	1575	! 3) indices iGCM, jGCM de la grille physique 2d
	1576	!
	1577	CALL LMDZ_CFMIP_point_locations(nCFMIP, lonCFMIP, latCFMIP, &
	1578	tabijGCM, lonGCM, latGCM, iGCM, jGCM)
	1579	!
	1580	ELSE
	1581	ALLOCATE(tabijGCM(0))
	1582	ALLOCATE(lonGCM(0), latGCM(0))
	1583	ALLOCATE(iGCM(0), jGCM(0))
	1584	ENDIF
	1585
	1586	#ifdef CPP_IOIPSL
	1587
	1588	!$OMP MASTER
	1589	! FH : if ok_sync=.true. , the time axis is written at each time step
	1590	! in the output files. Only at the end in the opposite case
[3461]	1591	ok_sync_omp=.FALSE.
[3435]	1592	CALL getin('ok_sync',ok_sync_omp)
	1593	CALL phys_output_open(longitude_deg,latitude_deg,nCFMIP,tabijGCM, &
	1594	iGCM,jGCM,lonGCM,latGCM, &
	1595	jjmp1,nlevSTD,clevSTD,rlevSTD, phys_tstep,ok_veget, &
	1596	type_ocean,iflag_pbl,iflag_pbl_split,ok_mensuel,ok_journe, &
	1597	ok_hf,ok_instan,ok_LES,ok_ade,ok_aie, &
	1598	read_climoz, phys_out_filestations, &
[3630]	1599	aerosol_couple, &
[3435]	1600	flag_aerosol_strat, pdtphys, paprs, pphis, &
	1601	pplay, lmax_th, ptconv, ptconvth, ivap, &
	1602	d_u, d_t, qx, d_qx, zmasse, ok_sync_omp)
	1603	!$OMP END MASTER
	1604	!$OMP BARRIER
	1605	ok_sync=ok_sync_omp
	1606
	1607	freq_outNMC(1) = ecrit_files(7)
	1608	freq_outNMC(2) = ecrit_files(8)
	1609	freq_outNMC(3) = ecrit_files(9)
	1610	WRITE(lunout,*)'OK freq_outNMC(1)=',freq_outNMC(1)
	1611	WRITE(lunout,*)'OK freq_outNMC(2)=',freq_outNMC(2)
	1612	WRITE(lunout,*)'OK freq_outNMC(3)=',freq_outNMC(3)
	1613
	1614	#ifndef CPP_XIOS
	1615	CALL ini_paramLMDZ_phy(phys_tstep,nid_ctesGCM)
	1616	#endif
	1617
	1618	#endif
	1619	ecrit_reg = ecrit_reg * un_jour
	1620	ecrit_tra = ecrit_tra * un_jour
	1621
	1622	!XXXPB Positionner date0 pour initialisation de ORCHIDEE
	1623	date0 = jD_ref
	1624	WRITE(,) 'physiq date0 : ',date0
	1625	!
	1626
	1627	! CALL create_climoz(read_climoz)
[3472]	1628	IF (.NOT. create_etat0_limit) CALL init_aero_fromfile(flag_aerosol) !! initialise aero from file for XIOS interpolation (unstructured_grid)
	1629	IF (.NOT. create_etat0_limit) CALL init_readaerosolstrato(flag_aerosol_strat) !! initialise aero strato from file for XIOS interpolation (unstructured_grid)
[3435]	1630
	1631	#ifdef CPP_COSP
	1632	IF (ok_cosp) THEN
[3726]	1633	! DO k = 1, klev
	1634	! DO i = 1, klon
	1635	! phicosp(i,k) = pphi(i,k) + pphis(i)
	1636	! ENDDO
	1637	! ENDDO
[3465]	1638	CALL phys_cosp(itap,phys_tstep,freq_cosp, &
[3435]	1639	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
	1640	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
	1641	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
	1642	JrNt,ref_liq,ref_ice, &
	1643	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
	1644	zu10m,zv10m,pphis, &
	1645	zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, &
	1646	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
	1647	prfl(:,1:klev),psfl(:,1:klev), &
	1648	pmflxr(:,1:klev),pmflxs(:,1:klev), &
	1649	mr_ozone,cldtau, cldemi)
[3778]	1650	ENDIF
	1651	#endif
[3512]	1652
	1653	#ifdef CPP_COSP2
	1654	IF (ok_cosp) THEN
[3726]	1655	! DO k = 1, klev
	1656	! DO i = 1, klon
	1657	! phicosp(i,k) = pphi(i,k) + pphis(i)
	1658	! ENDDO
	1659	! ENDDO
[3512]	1660	CALL phys_cosp2(itap,phys_tstep,freq_cosp, &
	1661	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
	1662	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
	1663	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
	1664	JrNt,ref_liq,ref_ice, &
	1665	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
	1666	zu10m,zv10m,pphis, &
	1667	zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, &
	1668	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
	1669	prfl(:,1:klev),psfl(:,1:klev), &
	1670	pmflxr(:,1:klev),pmflxs(:,1:klev), &
	1671	mr_ozone,cldtau, cldemi)
	1672	ENDIF
	1673	#endif
	1674
	1675	#ifdef CPP_COSPV2
	1676	IF (ok_cosp) THEN
	1677	DO k = 1, klev
	1678	DO i = 1, klon
	1679	phicosp(i,k) = pphi(i,k) + pphis(i)
	1680	ENDDO
	1681	ENDDO
	1682	CALL lmdz_cosp_interface(itap,phys_tstep,freq_cosp, &
	1683	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
	1684	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
	1685	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
	1686	JrNt,ref_liq,ref_ice, &
	1687	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
	1688	zu10m,zv10m,pphis, &
	1689	phicosp,paprs(:,1:klev),pplay,zxtsol,t_seri, &
	1690	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
	1691	prfl(:,1:klev),psfl(:,1:klev), &
	1692	pmflxr(:,1:klev),pmflxs(:,1:klev), &
	1693	mr_ozone,cldtau, cldemi)
	1694	ENDIF
	1695	#endif
	1696
[3460]	1697	!
[3465]	1698	!
	1699	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[3460]	1700	! Nouvelle initialisation pour le rayonnement RRTM
[3465]	1701	!
	1702	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[3435]	1703
[3460]	1704	CALL iniradia(klon,klev,paprs(1,1:klev+1))
[3776]	1705
	1706	! Initialisation des champs dans phytrac* qui sont utilisés par phys_output_write*
	1707	#ifdef CPP_Dust
	1708	! Quand on utilise SPLA, on force iflag_phytrac=1
	1709	CALL phytracr_spl_out_init()
	1710	CALL phys_output_write_spl(itap, pdtphys, paprs, pphis, &
	1711	pplay, lmax_th, aerosol_couple, &
	1712	ok_ade, ok_aie, ivap, ok_sync, &
	1713	ptconv, read_climoz, clevSTD, &
	1714	ptconvth, d_t, qx, d_qx, d_tr_dyn, zmasse, &
	1715	flag_aerosol, flag_aerosol_strat, ok_cdnc)
	1716	#else
	1717	! phys_output_write écrit des variables traceurs seulement si iflag_phytrac == 1
	1718	! donc seulement dans ce cas on doit appeler phytrac_init()
[3465]	1719	IF (iflag_phytrac == 1 ) THEN
	1720	CALL phytrac_init()
[3776]	1721	ENDIF
[3465]	1722	CALL phys_output_write(itap, pdtphys, paprs, pphis, &
	1723	pplay, lmax_th, aerosol_couple, &
[3630]	1724	ok_ade, ok_aie, ok_volcan, ivap, iliq, isol, ok_sync,&
[3465]	1725	ptconv, read_climoz, clevSTD, &
	1726	ptconvth, d_u, d_t, qx, d_qx, zmasse, &
	1727	flag_aerosol, flag_aerosol_strat, ok_cdnc)
[3776]	1728	#endif
[3460]	1729
[3776]	1730
[3435]	1731	#ifdef CPP_XIOS
	1732	IF (is_omp_master) CALL xios_update_calendar(1)
	1733	#endif
[3465]	1734	IF(read_climoz>=1 .AND. create_etat0_limit) CALL regr_horiz_time_climoz(read_climoz,ok_daily_climoz)
[3435]	1735
[3465]	1736	!jyg<
[3577]	1737	IF (iflag_pbl<=1) THEN
	1738	! No TKE for Standard Physics
	1739	pbl_tke(:,:,:)=0.
	1740
	1741	ELSE IF (klon_glo==1) THEN
[3465]	1742	pbl_tke(:,:,is_ave) = 0.
	1743	DO nsrf=1,nbsrf
	1744	DO k = 1,klev+1
	1745	pbl_tke(:,k,is_ave) = pbl_tke(:,k,is_ave) &
	1746	+pctsrf(:,nsrf)*pbl_tke(:,k,nsrf)
	1747	ENDDO
	1748	ENDDO
	1749	ELSE
	1750	pbl_tke(:,:,is_ave) = 0. !ym missing init : maybe must be initialized in the same way that for klon_glo==1 ??
	1751	!>jyg
	1752	ENDIF
[2469]	1753	!IM begin
	1754	print*,'physiq: clwcon rnebcon ratqs',clwcon(1,1),rnebcon(1,1) &
	1755	,ratqs(1,1)
	1756	!IM end
[878]	1757
	1758
[2469]	1759	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1760	!
	1761	! on remet le calendrier a zero
	1762	!
	1763	IF (raz_date .eq. 1) THEN
	1764	itau_phy = 0
	1765	ENDIF
[524]	1766
[3435]	1767	! IF (ABS(phys_tstep-pdtphys).GT.0.001) THEN
	1768	! WRITE(lunout,*) 'Pas physique n est pas correct',phys_tstep, &
	1769	! pdtphys
	1770	! abort_message='Pas physique n est pas correct '
	1771	! ! call abort_physic(modname,abort_message,1)
	1772	! phys_tstep=pdtphys
	1773	! ENDIF
[2469]	1774	IF (nlon .NE. klon) THEN
	1775	WRITE(lunout,*)'nlon et klon ne sont pas coherents', nlon, &
	1776	klon
	1777	abort_message='nlon et klon ne sont pas coherents'
[2692]	1778	CALL abort_physic(modname,abort_message,1)
[2469]	1779	ENDIF
	1780	IF (nlev .NE. klev) THEN
	1781	WRITE(lunout,*)'nlev et klev ne sont pas coherents', nlev, &
	1782	klev
	1783	abort_message='nlev et klev ne sont pas coherents'
[2692]	1784	CALL abort_physic(modname,abort_message,1)
[2469]	1785	ENDIF
	1786	!
[3435]	1787	IF (phys_tstep*REAL(radpas).GT.21600..AND.iflag_cycle_diurne.GE.1) THEN
[2469]	1788	WRITE(lunout,*)'Nbre d appels au rayonnement insuffisant'
	1789	WRITE(lunout,*)"Au minimum 4 appels par jour si cycle diurne"
	1790	abort_message='Nbre d appels au rayonnement insuffisant'
[2692]	1791	CALL abort_physic(modname,abort_message,1)
[2469]	1792	ENDIF
	1793	WRITE(lunout,*)"Clef pour la convection, iflag_con=", iflag_con
	1794	WRITE(lunout,*)"Clef pour le driver de la convection, ok_cvl=", &
	1795	ok_cvl
	1796	!
	1797	!KE43
	1798	! Initialisation pour la convection de K.E. (sb):
	1799	IF (iflag_con.GE.3) THEN
[524]	1800
[2469]	1801	WRITE(lunout,)"** Convection de Kerry Emanuel 4.3 "
	1802	WRITE(lunout,*) &
	1803	"On va utiliser le melange convectif des traceurs qui"
	1804	WRITE(lunout,*)"est calcule dans convect4.3"
	1805	WRITE(lunout,*)" !!! penser aux logical flags de phytrac"
[524]	1806
[2469]	1807	DO i = 1, klon
	1808	ema_cbmf(i) = 0.
	1809	ema_pcb(i) = 0.
	1810	ema_pct(i) = 0.
	1811	! ema_workcbmf(i) = 0.
	1812	ENDDO
	1813	!IM15/11/02 rajout initialisation ibas_con,itop_con cf. SB =>BEG
	1814	DO i = 1, klon
	1815	ibas_con(i) = 1
	1816	itop_con(i) = 1
	1817	ENDDO
	1818	!IM15/11/02 rajout initialisation ibas_con,itop_con cf. SB =>END
	1819	!================================================================
	1820	!CR:04.12.07: initialisations poches froides
	1821	! Controle de ALE et ALP pour la fermeture convective (jyg)
[2692]	1822	IF (iflag_wake>=1) THEN
[2469]	1823	CALL ini_wake(0.,0.,it_wape_prescr,wape_prescr,fip_prescr &
	1824	,alp_bl_prescr, ale_bl_prescr)
	1825	! 11/09/06 rajout initialisation ALE et ALP du wake et PBL(YU)
	1826	! print*,'apres ini_wake iflag_cld_th=', iflag_cld_th
[2638]	1827	!
	1828	! Initialize tendencies of wake state variables (for some flag values
	1829	! they are not computed).
	1830	d_deltat_wk(:,:) = 0.
	1831	d_deltaq_wk(:,:) = 0.
	1832	d_deltat_wk_gw(:,:) = 0.
	1833	d_deltaq_wk_gw(:,:) = 0.
	1834	d_deltat_vdf(:,:) = 0.
	1835	d_deltaq_vdf(:,:) = 0.
	1836	d_deltat_the(:,:) = 0.
	1837	d_deltaq_the(:,:) = 0.
	1838	d_deltat_ajs_cv(:,:) = 0.
	1839	d_deltaq_ajs_cv(:,:) = 0.
	1840	d_s_wk(:) = 0.
	1841	d_dens_wk(:) = 0.
[2692]	1842	ENDIF
[973]	1843
[2469]	1844	! do i = 1,klon
	1845	! Ale_bl(i)=0.
	1846	! Alp_bl(i)=0.
	1847	! enddo
[1638]	1848
[3435]	1849	!ELSE
	1850	! ALLOCATE(tabijGCM(0))
	1851	! ALLOCATE(lonGCM(0), latGCM(0))
	1852	! ALLOCATE(iGCM(0), jGCM(0))
[2469]	1853	ENDIF
[878]	1854
[2469]	1855	DO i=1,klon
	1856	rugoro(i) = f_rugoro * MAX(1.0e-05, zstd(i)*zsig(i)/2.0)
	1857	ENDDO
[1863]	1858
[2469]	1859	!34EK
	1860	IF (ok_orodr) THEN
[524]	1861
[2469]	1862	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1863	! FH sans doute a enlever de finitivement ou, si on le
	1864	! garde, l'activer justement quand ok_orodr = false.
	1865	! ce rugoro est utilise par la couche limite et fait double emploi
	1866	! avec les param\'etrisations sp\'ecifiques de Francois Lott.
	1867	! DO i=1,klon
	1868	! rugoro(i) = MAX(1.0e-05, zstd(i)*zsig(i)/2.0)
	1869	! ENDDO
	1870	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1871	IF (ok_strato) THEN
	1872	CALL SUGWD_strato(klon,klev,paprs,pplay)
	1873	ELSE
	1874	CALL SUGWD(klon,klev,paprs,pplay)
	1875	ENDIF
[1863]	1876
[2469]	1877	DO i=1,klon
	1878	zuthe(i)=0.
	1879	zvthe(i)=0.
[2692]	1880	IF (zstd(i).gt.10.) THEN
[2469]	1881	zuthe(i)=(1.-zgam(i))*cos(zthe(i))
	1882	zvthe(i)=(1.-zgam(i))*sin(zthe(i))
[2692]	1883	ENDIF
[2469]	1884	ENDDO
	1885	ENDIF
	1886	!
	1887	!
[3435]	1888	lmt_pas = NINT(86400./phys_tstep * 1.0) ! tous les jours
[2469]	1889	WRITE(lunout,*)'La frequence de lecture surface est de ', &
	1890	lmt_pas
	1891	!
	1892	capemaxcels = 't_max(X)'
	1893	t2mincels = 't_min(X)'
	1894	t2maxcels = 't_max(X)'
	1895	tinst = 'inst(X)'
	1896	tave = 'ave(X)'
	1897	!IM cf. AM 081204 BEG
[3465]	1898	write(lunout,*)'AVANT HIST IFLAG_CON=',iflag_con
[2469]	1899	!IM cf. AM 081204 END
	1900	!
	1901	!=============================================================
	1902	! Initialisation des sorties
	1903	!=============================================================
	1904
[3435]	1905	#ifdef CPP_XIOS
	1906	! Get "missing_val" value from XML files (from temperature variable)
	1907	!$OMP MASTER
	1908	CALL xios_get_field_attr("temp",default_value=missing_val_omp)
	1909	!$OMP END MASTER
	1910	!$OMP BARRIER
	1911	missing_val=missing_val_omp
	1912	#endif
	1913
[2679]	1914	#ifdef CPP_XIOS
[3778]	1915	! Need to put this initialisation after phyetat0 as in the coupled model the XIOS context is only
	1916	! initialised at that moment
	1917	! Get "missing_val" value from XML files (from temperature variable)
	1918	!$OMP MASTER
	1919	CALL xios_get_field_attr("temp",default_value=missing_val_omp)
	1920	!$OMP END MASTER
	1921	!$OMP BARRIER
	1922	missing_val=missing_val_omp
[2679]	1923	#endif
	1924
[524]	1925
[3435]	1926	CALL printflag( tabcntr0,radpas,ok_journe, &
	1927	ok_instan, ok_region )
[2469]	1928	!
	1929	!
	1930	!
	1931	! Prescrire l'ozone dans l'atmosphere
	1932	!
	1933	!
	1934	!c DO i = 1, klon
	1935	!c DO k = 1, klev
	1936	!c CALL o3cm (paprs(i,k)/100.,paprs(i,k+1)/100., wo(i,k),20)
	1937	!c ENDDO
	1938	!c ENDDO
	1939	!
	1940	IF (type_trac == 'inca') THEN
[524]	1941	#ifdef INCA
[2469]	1942	CALL VTe(VTphysiq)
	1943	CALL VTb(VTinca)
	1944	calday = REAL(days_elapsed) + jH_cur
	1945	WRITE(lunout,*) 'initial time chemini', days_elapsed, calday
[959]	1946
[2469]	1947	CALL chemini( &
	1948	rg, &
	1949	ra, &
	1950	cell_area, &
	1951	latitude_deg, &
	1952	longitude_deg, &
	1953	presnivs, &
	1954	calday, &
	1955	klon, &
	1956	nqtot, &
[2566]	1957	nqo, &
[2469]	1958	pdtphys, &
	1959	annee_ref, &
[2906]	1960	year_cur, &
[2469]	1961	day_ref, &
	1962	day_ini, &
	1963	start_time, &
	1964	itau_phy, &
[2831]	1965	date0, &
[2469]	1966	io_lon, &
[3351]	1967	io_lat, &
[3418]	1968	chemistry_couple, &
	1969	init_source, &
	1970	init_tauinca, &
	1971	init_pizinca, &
	1972	init_cginca, &
	1973	init_ccminca)
[959]	1974
[3418]	1975
	1976	! initialisation des variables depuis le restart de inca
	1977	ccm(:,:,:) = init_ccminca
	1978	tau_aero(:,:,:,:) = init_tauinca
	1979	piz_aero(:,:,:,:) = init_pizinca
	1980	cg_aero(:,:,:,:) = init_cginca
	1981	!
	1982
	1983
[2469]	1984	CALL VTe(VTinca)
	1985	CALL VTb(VTphysiq)
[524]	1986	#endif
[2692]	1987	ENDIF
[3666]	1988	IF (type_trac == 'repr') THEN
	1989	#ifdef REPROBUS
	1990	CALL chemini_rep( &
	1991	presnivs, &
	1992	pdtphys, &
	1993	annee_ref, &
	1994	day_ref, &
	1995	day_ini, &
	1996	start_time, &
	1997	itau_phy, &
	1998	io_lon, &
	1999	io_lat)
	2000	#endif
	2001	ENDIF
[3465]	2002
[2469]	2003	!$omp single
[2788]	2004	IF (read_climoz >= 1) CALL open_climoz(ncid_climoz, press_cen_climoz, &
[2820]	2005	press_edg_climoz, time_climoz, ok_daily_climoz, adjust_tropopause)
[2469]	2006	!$omp end single
	2007	!
	2008	!IM betaCRF
	2009	pfree=70000. !Pa
	2010	beta_pbl=1.
	2011	beta_free=1.
	2012	lon1_beta=-180.
	2013	lon2_beta=+180.
	2014	lat1_beta=90.
	2015	lat2_beta=-90.
	2016	mskocean_beta=.FALSE.
[1539]	2017
[2469]	2018	!albedo SB >>>
[3461]	2019	SELECT CASE(nsw)
	2020	CASE(2)
[2469]	2021	SFRWL(1)=0.45538747
	2022	SFRWL(2)=0.54461211
[3461]	2023	CASE(4)
[2469]	2024	SFRWL(1)=0.45538747
	2025	SFRWL(2)=0.32870591
	2026	SFRWL(3)=0.18568763
	2027	SFRWL(4)=3.02191470E-02
[3461]	2028	CASE(6)
[2469]	2029	SFRWL(1)=1.28432794E-03
	2030	SFRWL(2)=0.12304168
	2031	SFRWL(3)=0.33106142
	2032	SFRWL(4)=0.32870591
	2033	SFRWL(5)=0.18568763
	2034	SFRWL(6)=3.02191470E-02
[3461]	2035	END SELECT
[2227]	2036
	2037
[2469]	2038	!albedo SB <<<
[2227]	2039
[2469]	2040	OPEN(99,file='beta_crf.data',status='old', &
	2041	form='formatted',err=9999)
	2042	READ(99,*,end=9998) pfree
	2043	READ(99,*,end=9998) beta_pbl
	2044	READ(99,*,end=9998) beta_free
	2045	READ(99,*,end=9998) lon1_beta
	2046	READ(99,*,end=9998) lon2_beta
	2047	READ(99,*,end=9998) lat1_beta
	2048	READ(99,*,end=9998) lat2_beta
	2049	READ(99,*,end=9998) mskocean_beta
	2050	9998 Continue
	2051	CLOSE(99)
	2052	9999 Continue
	2053	WRITE(,)'pfree=',pfree
	2054	WRITE(,)'beta_pbl=',beta_pbl
	2055	WRITE(,)'beta_free=',beta_free
	2056	WRITE(,)'lon1_beta=',lon1_beta
	2057	WRITE(,)'lon2_beta=',lon2_beta
	2058	WRITE(,)'lat1_beta=',lat1_beta
	2059	WRITE(,)'lat2_beta=',lat2_beta
	2060	WRITE(,)'mskocean_beta=',mskocean_beta
[3048]	2061
	2062	!lwoff=y : offset LW CRE for radiation code and other schemes
	2063	!lwoff=y : betalwoff=1.
	2064	betalwoff=0.
	2065	IF (ok_lwoff) THEN
	2066	betalwoff=1.
	2067	ENDIF
	2068	WRITE(,)'ok_lwoff=',ok_lwoff
	2069	!
	2070	!lwoff=y to begin only sollw and sollwdown are set up to CS values
	2071	sollw = sollw + betalwoff * (sollw0 - sollw)
	2072	sollwdown(:)= sollwdown(:) + betalwoff (-1.ZFLDN0(:,1) - &
	2073	sollwdown(:))
[3597]	2074
	2075
[2469]	2076	ENDIF
	2077	!
	2078	! ************** Fin de IF ( debut ) *************
	2079	!
	2080	!
	2081	! Incrementer le compteur de la physique
	2082	!
	2083	itap = itap + 1
[2795]	2084	IF (is_master .OR. prt_level > 9) THEN
[2783]	2085	IF (prt_level > 5 .or. MOD(itap,5) == 0) THEN
[2795]	2086	WRITE(LUNOUT,*)'Entering physics elapsed seconds since start ', current_time
	2087	WRITE(LUNOUT,100)year_cur,mth_cur,day_cur,hour/3600.
	2088	100 FORMAT('Date = ',i4.4,' / ',i2.2, ' / ',i2.2,' : ',f20.17)
[2783]	2089	ENDIF
	2090	ENDIF
[2469]	2091	!
	2092	!
	2093	! Update fraction of the sub-surfaces (pctsrf) and
	2094	! initialize, where a new fraction has appeared, all variables depending
	2095	! on the surface fraction.
	2096	!
[3435]	2097	CALL change_srf_frac(itap, phys_tstep, days_elapsed+1, &
[2469]	2098	pctsrf, fevap, z0m, z0h, agesno, &
	2099	falb_dir, falb_dif, ftsol, ustar, u10m, v10m, pbl_tke)
[996]	2100
[2469]	2101	! Update time and other variables in Reprobus
	2102	IF (type_trac == 'repr') THEN
[1565]	2103	#ifdef REPROBUS
[2469]	2104	CALL Init_chem_rep_xjour(jD_cur-jD_ref+day_ref)
	2105	print*,'xjour equivalent rjourvrai',jD_cur-jD_ref+day_ref
	2106	CALL Rtime(debut)
[1565]	2107	#endif
[2692]	2108	ENDIF
[1565]	2109
[2469]	2110	! Tendances bidons pour les processus qui n'affectent pas certaines
	2111	! variables.
	2112	du0(:,:)=0.
	2113	dv0(:,:)=0.
	2114	dt0 = 0.
	2115	dq0(:,:)=0.
	2116	dql0(:,:)=0.
	2117	dqi0(:,:)=0.
[2635]	2118	dsig0(:) = 0.
	2119	ddens0(:) = 0.
	2120	wkoccur1(:)=1
[2469]	2121	!
	2122	! Mettre a zero des variables de sortie (pour securite)
	2123	!
	2124	DO i = 1, klon
	2125	d_ps(i) = 0.0
	2126	ENDDO
	2127	DO k = 1, klev
	2128	DO i = 1, klon
	2129	d_t(i,k) = 0.0
	2130	d_u(i,k) = 0.0
	2131	d_v(i,k) = 0.0
	2132	ENDDO
	2133	ENDDO
	2134	DO iq = 1, nqtot
	2135	DO k = 1, klev
	2136	DO i = 1, klon
	2137	d_qx(i,k,iq) = 0.0
	2138	ENDDO
	2139	ENDDO
	2140	ENDDO
	2141	beta_prec_fisrt(:,:)=0.
	2142	beta_prec(:,:)=0.
[3134]	2143	!
	2144	! Output variables from the convective scheme should not be set to 0
	2145	! since convection is not always called at every time step.
	2146	IF (ok_bug_cv_trac) THEN
	2147	da(:,:)=0.
	2148	mp(:,:)=0.
	2149	phi(:,:,:)=0.
	2150	! RomP >>>
	2151	phi2(:,:,:)=0.
	2152	epmlmMm(:,:,:)=0.
	2153	eplaMm(:,:)=0.
	2154	d1a(:,:)=0.
	2155	dam(:,:)=0.
	2156	pmflxr(:,:)=0.
	2157	pmflxs(:,:)=0.
	2158	! RomP <<<
	2159	ENDIF
[1742]	2160
[2469]	2161	!
	2162	! Ne pas affecter les valeurs entrees de u, v, h, et q
	2163	!
	2164	DO k = 1, klev
	2165	DO i = 1, klon
	2166	t_seri(i,k) = t(i,k)
	2167	u_seri(i,k) = u(i,k)
	2168	v_seri(i,k) = v(i,k)
	2169	q_seri(i,k) = qx(i,k,ivap)
	2170	ql_seri(i,k) = qx(i,k,iliq)
	2171	!CR: ATTENTION, on rajoute la variable glace
[2692]	2172	IF (nqo.eq.2) THEN
[2469]	2173	qs_seri(i,k) = 0.
[2692]	2174	ELSE IF (nqo.eq.3) THEN
[2469]	2175	qs_seri(i,k) = qx(i,k,isol)
[2692]	2176	ENDIF
[2469]	2177	ENDDO
	2178	ENDDO
[2476]	2179	!
	2180	!--OB mass fixer
	2181	IF (mass_fixer) THEN
	2182	!--store initial water burden
	2183	qql1(:)=0.0
[2499]	2184	DO k = 1, klev
	2185	qql1(:)=qql1(:)+(q_seri(:,k)+ql_seri(:,k)+qs_seri(:,k))*zmasse(:,k)
[2476]	2186	ENDDO
	2187	ENDIF
	2188	!--fin mass fixer
	2189
[2469]	2190	tke0(:,:)=pbl_tke(:,:,is_ave)
	2191	!CR:Nombre de traceurs de l'eau: nqo
	2192	! IF (nqtot.GE.3) THEN
	2193	IF (nqtot.GE.(nqo+1)) THEN
	2194	! DO iq = 3, nqtot
	2195	DO iq = nqo+1, nqtot
	2196	DO k = 1, klev
	2197	DO i = 1, klon
	2198	! tr_seri(i,k,iq-2) = qx(i,k,iq)
	2199	tr_seri(i,k,iq-nqo) = qx(i,k,iq)
	2200	ENDDO
	2201	ENDDO
	2202	ENDDO
	2203	ELSE
	2204	DO k = 1, klev
	2205	DO i = 1, klon
	2206	tr_seri(i,k,1) = 0.0
	2207	ENDDO
	2208	ENDDO
	2209	ENDIF
[3599]	2210	!
	2211	! Temporary solutions adressing ticket #104 and the non initialisation of tr_ancien
	2212	! LF
	2213	IF (debut) THEN
	2214	WRITE(lunout,*)' WARNING: tr_ancien initialised to tr_seri'
	2215	DO iq = nqo+1, nqtot
	2216	tr_ancien(:,:,iq-nqo)=tr_seri(:,:,iq-nqo)
	2217	ENDDO
	2218	ENDIF
[2469]	2219	!
	2220	DO i = 1, klon
	2221	ztsol(i) = 0.
	2222	ENDDO
	2223	DO nsrf = 1, nbsrf
	2224	DO i = 1, klon
	2225	ztsol(i) = ztsol(i) + ftsol(i,nsrf)*pctsrf(i,nsrf)
	2226	ENDDO
	2227	ENDDO
[2611]	2228	! Initialize variables used for diagnostic purpose
[2692]	2229	IF (flag_inhib_tend .ne. 0) CALL init_cmp_seri
[524]	2230
[2469]	2231	! Diagnostiquer la tendance dynamique
	2232	!
	2233	IF (ancien_ok) THEN
[2499]	2234	!
[3435]	2235	d_u_dyn(:,:) = (u_seri(:,:)-u_ancien(:,:))/phys_tstep
	2236	d_v_dyn(:,:) = (v_seri(:,:)-v_ancien(:,:))/phys_tstep
	2237	d_t_dyn(:,:) = (t_seri(:,:)-t_ancien(:,:))/phys_tstep
	2238	d_q_dyn(:,:) = (q_seri(:,:)-q_ancien(:,:))/phys_tstep
	2239	d_ql_dyn(:,:) = (ql_seri(:,:)-ql_ancien(:,:))/phys_tstep
	2240	d_qs_dyn(:,:) = (qs_seri(:,:)-qs_ancien(:,:))/phys_tstep
[2499]	2241	CALL water_int(klon,klev,q_seri,zmasse,zx_tmp_fi2d)
[3435]	2242	d_q_dyn2d(:)=(zx_tmp_fi2d(:)-prw_ancien(:))/phys_tstep
[2499]	2243	CALL water_int(klon,klev,ql_seri,zmasse,zx_tmp_fi2d)
[3435]	2244	d_ql_dyn2d(:)=(zx_tmp_fi2d(:)-prlw_ancien(:))/phys_tstep
[2499]	2245	CALL water_int(klon,klev,qs_seri,zmasse,zx_tmp_fi2d)
[3435]	2246	d_qs_dyn2d(:)=(zx_tmp_fi2d(:)-prsw_ancien(:))/phys_tstep
[2469]	2247	! !! RomP >>> td dyn traceur
[2499]	2248	IF (nqtot.GT.nqo) THEN ! jyg
[2469]	2249	DO iq = nqo+1, nqtot ! jyg
[3435]	2250	d_tr_dyn(:,:,iq-nqo)=(tr_seri(:,:,iq-nqo)-tr_ancien(:,:,iq-nqo))/phys_tstep ! jyg
[2469]	2251	ENDDO
	2252	ENDIF
	2253	! !! RomP <<<
	2254	ELSE
[2499]	2255	d_u_dyn(:,:) = 0.0
	2256	d_v_dyn(:,:) = 0.0
	2257	d_t_dyn(:,:) = 0.0
	2258	d_q_dyn(:,:) = 0.0
	2259	d_ql_dyn(:,:) = 0.0
	2260	d_qs_dyn(:,:) = 0.0
	2261	d_q_dyn2d(:) = 0.0
	2262	d_ql_dyn2d(:) = 0.0
	2263	d_qs_dyn2d(:) = 0.0
[2469]	2264	! !! RomP >>> td dyn traceur
[2499]	2265	IF (nqtot.GT.nqo) THEN ! jyg
	2266	DO iq = nqo+1, nqtot ! jyg
	2267	d_tr_dyn(:,:,iq-nqo)= 0.0 ! jyg
[2469]	2268	ENDDO
	2269	ENDIF
	2270	! !! RomP <<<
	2271	ancien_ok = .TRUE.
	2272	ENDIF
	2273	!
	2274	! Ajouter le geopotentiel du sol:
	2275	!
	2276	DO k = 1, klev
	2277	DO i = 1, klon
	2278	zphi(i,k) = pphi(i,k) + pphis(i)
	2279	ENDDO
	2280	ENDDO
	2281	!
	2282	! Verifier les temperatures
	2283	!
	2284	!IM BEG
	2285	IF (check) THEN
	2286	amn=MIN(ftsol(1,is_ter),1000.)
	2287	amx=MAX(ftsol(1,is_ter),-1000.)
	2288	DO i=2, klon
	2289	amn=MIN(ftsol(i,is_ter),amn)
	2290	amx=MAX(ftsol(i,is_ter),amx)
	2291	ENDDO
	2292	!
	2293	PRINT*,' debut avant hgardfou min max ftsol',itap,amn,amx
	2294	ENDIF !(check) THEN
	2295	!IM END
	2296	!
	2297	CALL hgardfou(t_seri,ftsol,'debutphy',abortphy)
	2298	IF (abortphy==1) Print*,'ERROR ABORT hgardfou debutphy'
[2235]	2299
[2469]	2300	!
	2301	!IM BEG
	2302	IF (check) THEN
	2303	amn=MIN(ftsol(1,is_ter),1000.)
	2304	amx=MAX(ftsol(1,is_ter),-1000.)
	2305	DO i=2, klon
	2306	amn=MIN(ftsol(i,is_ter),amn)
	2307	amx=MAX(ftsol(i,is_ter),amx)
	2308	ENDDO
	2309	!
	2310	PRINT*,' debut apres hgardfou min max ftsol',itap,amn,amx
	2311	ENDIF !(check) THEN
	2312	!IM END
	2313	!
	2314	! Mettre en action les conditions aux limites (albedo, sst, etc.).
	2315	! Prescrire l'ozone et calculer l'albedo sur l'ocean.
	2316	!
[2661]	2317	! Update ozone if day change
	2318	IF (MOD(itap-1,lmt_pas) == 0) THEN
[2774]	2319	IF (read_climoz <= 0) THEN
	2320	! Once per day, update ozone from Royer:
	2321	IF (solarlong0<-999.) then
	2322	! Generic case with evolvoing season
	2323	zzz=real(days_elapsed+1)
	2324	ELSE IF (abs(solarlong0-1000.)<1.e-4) then
	2325	! Particular case with annual mean insolation
	2326	zzz=real(90) ! could be revisited
	2327	IF (read_climoz/=-1) THEN
	2328	abort_message ='read_climoz=-1 is recommended when ' &
	2329	// 'solarlong0=1000.'
	2330	CALL abort_physic (modname,abort_message,1)
	2331	ENDIF
	2332	ELSE
	2333	! Case where the season is imposed with solarlong0
	2334	zzz=real(90) ! could be revisited
	2335	ENDIF
[2661]	2336
[2774]	2337	wo(:,:,1)=ozonecm(latitude_deg, paprs,read_climoz,rjour=zzz)
[3666]	2338	#ifdef REPROBUS
	2339	ptrop=dyn_tropopause(t_seri, ztsol, paprs, pplay, rot)/100.
	2340	DO i = 1, klon
	2341	Z1=t_seri(i,itroprep(i)+1)
	2342	Z2=t_seri(i,itroprep(i))
	2343	fac=(Z1-Z2)/alog(pplay(i,itroprep(i)+1)/pplay(i,itroprep(i)))
	2344	B=Z2-fac*alog(pplay(i,itroprep(i)))
	2345	ttrop(i)= fac*alog(ptrop(i))+B
	2346	!
	2347	Z1= 1.e-3 * ( pphi(i,itroprep(i)+1)+pphis(i) ) / gravit
	2348	Z2= 1.e-3 * ( pphi(i,itroprep(i)) +pphis(i) ) / gravit
	2349	fac=(Z1-Z2)/alog(pplay(i,itroprep(i)+1)/pplay(i,itroprep(i)))
	2350	B=Z2-fac*alog(pplay(i,itroprep(i)))
	2351	ztrop(i)=fac*alog(ptrop(i))+B
	2352	ENDDO
	2353	#endif
[2774]	2354	ELSE
[2820]	2355	!--- ro3i = elapsed days number since current year 1st january, 0h
	2356	ro3i=days_elapsed+jh_cur-jh_1jan
	2357	!--- scaling for old style files (360 records)
	2358	IF(SIZE(time_climoz)==360.AND..NOT.ok_daily_climoz) ro3i=ro3i*360./year_len
[2788]	2359	IF(adjust_tropopause) THEN
[2820]	2360	CALL regr_pr_time_av(ncid_climoz, vars_climoz(1:read_climoz), &
[3086]	2361	ro3i, 'C', press_cen_climoz, pplay, wo, paprs(:,1), &
	2362	time_climoz , longitude_deg, latitude_deg, &
[2968]	2363	dyn_tropopause(t_seri, ztsol, paprs, pplay, rot))
[2774]	2364	ELSE
[3086]	2365	CALL regr_pr_time_av(ncid_climoz, vars_climoz(1:read_climoz), &
	2366	ro3i, 'C', press_cen_climoz, pplay, wo, paprs(:,1), &
	2367	time_climoz )
[3461]	2368	ENDIF
[2774]	2369	! Convert from mole fraction of ozone to column density of ozone in a
	2370	! cell, in kDU:
	2371	FORALL (l = 1: read_climoz) wo(:, :, l) = wo(:, :, l) * rmo3 / rmd &
	2372	* zmasse / dobson_u / 1e3
[2788]	2373	! (By regridding ozone values for LMDZ only once a day, we
[2774]	2374	! have already neglected the variation of pressure in one
	2375	! day. So do not recompute "wo" at each time step even if
	2376	! "zmasse" changes a little.)
	2377	ENDIF
[2469]	2378	ENDIF
	2379	!
	2380	! Re-evaporer l'eau liquide nuageuse
	2381	!
[2705]	2382	CALL reevap (klon,klev,iflag_ice_thermo,t_seri,q_seri,ql_seri,qs_seri, &
	2383	& d_t_eva,d_q_eva,d_ql_eva,d_qi_eva)
[1849]	2384
[2705]	2385	CALL add_phys_tend &
	2386	(du0,dv0,d_t_eva,d_q_eva,d_ql_eva,d_qi_eva,paprs,&
[2812]	2387	'eva',abortphy,flag_inhib_tend,itap,0)
[3461]	2388	CALL prt_enerbil('eva',itap)
[2086]	2389
[2469]	2390	!=========================================================================
	2391	! Calculs de l'orbite.
	2392	! Necessaires pour le rayonnement et la surface (calcul de l'albedo).
	2393	! doit donc etre plac\'e avant radlwsw et pbl_surface
[883]	2394
[2469]	2395	! !! jyg 17 Sep 2010 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[2692]	2396	CALL ymds2ju(year_cur, mth_eq, day_eq,0., jD_eq)
[2469]	2397	day_since_equinox = (jD_cur + jH_cur) - jD_eq
	2398	!
	2399	! choix entre calcul de la longitude solaire vraie ou valeur fixee a
	2400	! solarlong0
[2692]	2401	IF (solarlong0<-999.) THEN
	2402	IF (new_orbit) THEN
[2469]	2403	! calcul selon la routine utilisee pour les planetes
[2692]	2404	CALL solarlong(day_since_equinox, zlongi, dist)
	2405	ELSE
[2469]	2406	! calcul selon la routine utilisee pour l'AR4
	2407	CALL orbite(REAL(days_elapsed+1),zlongi,dist)
[2692]	2408	ENDIF
	2409	ELSE
[2469]	2410	zlongi=solarlong0 ! longitude solaire vraie
	2411	dist=1. ! distance au soleil / moyenne
[2692]	2412	ENDIF
[1529]	2413
[2692]	2414	IF (prt_level.ge.1) write(lunout,*)'Longitude solaire ',zlongi,solarlong0,dist
[524]	2415
[2692]	2416
[2469]	2417	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	2418	! Calcul de l'ensoleillement :
	2419	! ============================
	2420	! Pour une solarlong0=1000., on calcule un ensoleillement moyen sur
	2421	! l'annee a partir d'une formule analytique.
	2422	! Cet ensoleillement est sym\'etrique autour de l'\'equateur et
	2423	! non nul aux poles.
[2692]	2424	IF (abs(solarlong0-1000.)<1.e-4) THEN
	2425	CALL zenang_an(iflag_cycle_diurne.GE.1,jH_cur, &
[2469]	2426	latitude_deg,longitude_deg,rmu0,fract)
[2979]	2427	swradcorr(:) = 1.0
	2428	JrNt(:) = 1.0
	2429	zrmu0(:) = rmu0(:)
[2469]	2430	ELSE
	2431	! recode par Olivier Boucher en sept 2015
	2432	SELECT CASE (iflag_cycle_diurne)
	2433	CASE(0)
	2434	! Sans cycle diurne
	2435	CALL angle(zlongi, latitude_deg, fract, rmu0)
	2436	swradcorr = 1.0
	2437	JrNt = 1.0
	2438	zrmu0 = rmu0
	2439	CASE(1)
	2440	! Avec cycle diurne sans application des poids
	2441	! bit comparable a l ancienne formulation cycle_diurne=true
	2442	! on integre entre gmtime et gmtime+radpas
[3435]	2443	zdtime=phys_tstep*REAL(radpas) ! pas de temps du rayonnement (s)
[2469]	2444	CALL zenang(zlongi,jH_cur,0.0,zdtime, &
	2445	latitude_deg,longitude_deg,rmu0,fract)
	2446	zrmu0 = rmu0
	2447	swradcorr = 1.0
	2448	! Calcul du flag jour-nuit
	2449	JrNt = 0.0
	2450	WHERE (fract.GT.0.0) JrNt = 1.0
	2451	CASE(2)
	2452	! Avec cycle diurne sans application des poids
	2453	! On integre entre gmtime-pdtphys et gmtime+pdtphys*(radpas-1)
	2454	! Comme cette routine est appele a tous les pas de temps de
	2455	! la physique meme si le rayonnement n'est pas appele je
	2456	! remonte en arriere les radpas-1 pas de temps
	2457	! suivant. Petite ruse avec MOD pour prendre en compte le
	2458	! premier pas de temps de la physique pendant lequel
	2459	! itaprad=0
[3435]	2460	zdtime1=phys_tstep*REAL(-MOD(itaprad,radpas)-1)
	2461	zdtime2=phys_tstep*REAL(radpas-MOD(itaprad,radpas)-1)
[2469]	2462	CALL zenang(zlongi,jH_cur,zdtime1,zdtime2, &
	2463	latitude_deg,longitude_deg,rmu0,fract)
	2464	!
	2465	! Calcul des poids
	2466	!
[3435]	2467	zdtime1=-phys_tstep !--on corrige le rayonnement pour representer le
[2469]	2468	zdtime2=0.0 !--pas de temps de la physique qui se termine
	2469	CALL zenang(zlongi,jH_cur,zdtime1,zdtime2, &
	2470	latitude_deg,longitude_deg,zrmu0,zfract)
	2471	swradcorr = 0.0
	2472	WHERE (rmu0.GE.1.e-10 .OR. fract.GE.1.e-10) &
	2473	swradcorr=zfract/fract*zrmu0/rmu0
	2474	! Calcul du flag jour-nuit
	2475	JrNt = 0.0
	2476	WHERE (zfract.GT.0.0) JrNt = 1.0
	2477	END SELECT
	2478	ENDIF
[3110]	2479	sza_o = ACOS (rmu0) *180./pi
[782]	2480
[2692]	2481	IF (mydebug) THEN
	2482	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	2483	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	2484	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	2485	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	2486	ENDIF
[883]	2487
[2469]	2488	!cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
	2489	! Appel au pbl_surface : Planetary Boudary Layer et Surface
	2490	! Cela implique tous les interactions des sous-surfaces et la
	2491	! partie diffusion turbulent du couche limit.
	2492	!
	2493	! Certains varibales de sorties de pbl_surface sont utiliser que pour
	2494	! ecriture des fihiers hist_XXXX.nc, ces sont :
	2495	! qsol, zq2m, s_pblh, s_lcl,
	2496	! s_capCL, s_oliqCL, s_cteiCL,s_pblT,
	2497	! s_therm, s_trmb1, s_trmb2, s_trmb3,
	2498	! zu10m, zv10m, fder,
	2499	! zxqsurf, rh2m, zxfluxu, zxfluxv,
	2500	! frugs, agesno, fsollw, fsolsw,
	2501	! d_ts, fevap, fluxlat, t2m,
	2502	! wfbils, wfbilo, fluxt, fluxu, fluxv,
	2503	!
	2504	! Certains ne sont pas utiliser du tout :
	2505	! dsens, devap, zxsnow, zxfluxt, zxfluxq, q2m, fluxq
	2506	!
[1724]	2507
[2469]	2508	! Calcul de l'humidite de saturation au niveau du sol
[1724]	2509
	2510
[996]	2511
[2692]	2512	IF (iflag_pbl/=0) THEN
[2240]	2513
[2469]	2514	!jyg+nrlmd<
[2852]	2515	!!jyg IF (prt_level .ge. 2 .and. mod(iflag_pbl_split,2) .eq. 1) THEN
	2516	IF (prt_level .ge. 2 .and. mod(iflag_pbl_split,10) .ge. 1) THEN
[3179]	2517	print *,'debut du splitting de la PBL, wake_s = ', wake_s(:)
	2518	print *,'debut du splitting de la PBL, wake_deltat = ', wake_deltat(:,1)
	2519	print *,'debut du splitting de la PBL, wake_deltaq = ', wake_deltaq(:,1)
[2469]	2520	ENDIF
	2521	! !!
	2522	!>jyg+nrlmd
	2523	!
	2524	!-------gustiness calculation-------!
[3435]	2525	!ym : Warning gustiness non inialized for iflag_gusts=2 & iflag_gusts=3
	2526	gustiness=0 !ym missing init
	2527
[2469]	2528	IF (iflag_gusts==0) THEN
	2529	gustiness(1:klon)=0
	2530	ELSE IF (iflag_gusts==1) THEN
[3111]	2531	gustiness(1:klon)=f_gust_blale_bl(1:klon)+f_gust_wkale_wake(1:klon)
	2532	ELSE IF (iflag_gusts==2) THEN
	2533	gustiness(1:klon)=f_gust_blale_bl_stat(1:klon)+f_gust_wkale_wake(1:klon)
[2469]	2534	! ELSE IF (iflag_gusts==2) THEN
	2535	! do i = 1, klon
	2536	! gustiness(i)=f_gust_blale_bl(i)+sigma_wk(i)f_gust_wk&
	2537	! *ale_wake(i) !! need to make sigma_wk accessible here
	2538	! enddo
	2539	! ELSE IF (iflag_gusts==3) THEN
	2540	! do i = 1, klon
	2541	! gustiness(i)=f_gust_blalp_bl(i)+f_gust_wkalp_wake(i)
	2542	! enddo
	2543	ENDIF
[2278]	2544
[2469]	2545	CALL pbl_surface( &
[3435]	2546	phys_tstep, date0, itap, days_elapsed+1, &
[2469]	2547	debut, lafin, &
	2548	longitude_deg, latitude_deg, rugoro, zrmu0, &
	2549	zsig, sollwdown, pphi, cldt, &
[3756]	2550	rain_fall, snow_fall, solsw, solswfdiff, sollw, &
[2469]	2551	gustiness, &
	2552	t_seri, q_seri, u_seri, v_seri, &
	2553	!nrlmd+jyg<
	2554	wake_deltat, wake_deltaq, wake_cstar, wake_s, &
	2555	!>nrlmd+jyg
	2556	pplay, paprs, pctsrf, &
	2557	ftsol,SFRWL,falb_dir,falb_dif,ustar,u10m,v10m,wstar, &
	2558	!albedo SB <<<
	2559	cdragh, cdragm, u1, v1, &
	2560	!albedo SB >>>
	2561	! albsol1, albsol2, sens, evap, &
	2562	albsol_dir, albsol_dif, sens, evap, &
	2563	!albedo SB <<<
	2564	albsol3_lic,runoff, snowhgt, qsnow, to_ice, sissnow, &
	2565	zxtsol, zxfluxlat, zt2m, qsat2m, &
	2566	d_t_vdf, d_q_vdf, d_u_vdf, d_v_vdf, d_t_diss, &
	2567	!nrlmd<
	2568	!jyg<
	2569	d_t_vdf_w, d_q_vdf_w, &
	2570	d_t_vdf_x, d_q_vdf_x, &
	2571	sens_x, zxfluxlat_x, sens_w, zxfluxlat_w, &
	2572	!>jyg
	2573	delta_tsurf,wake_dens, &
	2574	cdragh_x,cdragh_w,cdragm_x,cdragm_w, &
	2575	kh,kh_x,kh_w, &
	2576	!>nrlmd
	2577	coefh(1:klon,1:klev,1:nbsrf+1), coefm(1:klon,1:klev,1:nbsrf+1), &
	2578	slab_wfbils, &
	2579	qsol, zq2m, s_pblh, s_lcl, &
	2580	!jyg<
	2581	s_pblh_x, s_lcl_x, s_pblh_w, s_lcl_w, &
	2582	!>jyg
	2583	s_capCL, s_oliqCL, s_cteiCL,s_pblT, &
	2584	s_therm, s_trmb1, s_trmb2, s_trmb3, &
	2585	zustar, zu10m, zv10m, fder, &
	2586	zxqsurf, rh2m, zxfluxu, zxfluxv, &
	2587	z0m, z0h, agesno, fsollw, fsolsw, &
	2588	d_ts, fevap, fluxlat, t2m, &
[2670]	2589	wfbils, wfbilo, wfevap, wfrain, wfsnow, &
	2590	fluxt, fluxu, fluxv, &
[2469]	2591	dsens, devap, zxsnow, &
	2592	zxfluxt, zxfluxq, q2m, fluxq, pbl_tke, &
	2593	!nrlmd+jyg<
[2952]	2594	wake_delta_pbl_TKE, &
[2469]	2595	!>nrlmd+jyg
[2952]	2596	treedrg )
	2597	!FC
[2469]	2598	!
	2599	! Add turbulent diffusion tendency to the wake difference variables
[2852]	2600	!!jyg IF (mod(iflag_pbl_split,2) .NE. 0) THEN
	2601	IF (mod(iflag_pbl_split,10) .NE. 0) THEN
[2635]	2602	!jyg<
	2603	d_deltat_vdf(:,:) = d_t_vdf_w(:,:)-d_t_vdf_x(:,:)
	2604	d_deltaq_vdf(:,:) = d_q_vdf_w(:,:)-d_q_vdf_x(:,:)
	2605	CALL add_wake_tend &
[3208]	2606	(d_deltat_vdf, d_deltaq_vdf, dsig0, ddens0, ddens0, wkoccur1, 'vdf', abortphy)
[2635]	2607	ELSE
	2608	d_deltat_vdf(:,:) = 0.
	2609	d_deltaq_vdf(:,:) = 0.
	2610	!>jyg
[2469]	2611	ENDIF
[1624]	2612
[3489]	2613	!add limitation for t,q at and wind at 10m
	2614	if ( iflag_bug_t2m_ipslcm61 == 0 ) THEN
	2615	CALL borne_var_surf( klon,klev,nbsrf, &
	2616	iflag_bug_t2m_stab_ipslcm61, &
	2617	t_seri(:,1),q_seri(:,1),u_seri(:,1),v_seri(:,1), &
	2618	ftsol,zxqsurf,pctsrf,paprs, &
	2619	t2m, q2m, u10m, v10m, &
	2620	zt2m_cor, zq2m_cor, zu10m_cor, zv10m_cor, &
	2621	zrh2m_cor, zqsat2m_cor)
	2622	ELSE
	2623	zt2m_cor(:)=zt2m(:)
	2624	zq2m_cor(:)=zq2m(:)
	2625	zu10m_cor(:)=zu10m(:)
	2626	zv10m_cor(:)=zv10m(:)
[3575]	2627	zqsat2m_cor=999.999
[3489]	2628	ENDIF
[766]	2629
[2469]	2630	!---------------------------------------------------------------------
	2631	! ajout des tendances de la diffusion turbulente
	2632	IF (klon_glo==1) THEN
	2633	CALL add_pbl_tend &
	2634	(d_u_vdf,d_v_vdf,d_t_vdf+d_t_diss,d_q_vdf,dql0,dqi0,paprs,&
[2799]	2635	'vdf',abortphy,flag_inhib_tend,itap)
[2469]	2636	ELSE
	2637	CALL add_phys_tend &
	2638	(d_u_vdf,d_v_vdf,d_t_vdf+d_t_diss,d_q_vdf,dql0,dqi0,paprs,&
[2812]	2639	'vdf',abortphy,flag_inhib_tend,itap,0)
[2469]	2640	ENDIF
[3461]	2641	CALL prt_enerbil('vdf',itap)
[2469]	2642	!--------------------------------------------------------------------
[766]	2643
[2692]	2644	IF (mydebug) THEN
	2645	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	2646	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	2647	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	2648	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	2649	ENDIF
[2227]	2650
[2469]	2651	!albedo SB >>>
	2652	albsol1=0.
	2653	albsol2=0.
	2654	falb1=0.
	2655	falb2=0.
[2692]	2656	SELECT CASE(nsw)
	2657	CASE(2)
[2469]	2658	albsol1=albsol_dir(:,1)
	2659	albsol2=albsol_dir(:,2)
	2660	falb1=falb_dir(:,1,:)
	2661	falb2=falb_dir(:,2,:)
[2692]	2662	CASE(4)
[2469]	2663	albsol1=albsol_dir(:,1)
	2664	albsol2=albsol_dir(:,2)SFRWL(2)+albsol_dir(:,3)SFRWL(3) &
	2665	+albsol_dir(:,4)*SFRWL(4)
	2666	albsol2=albsol2/(SFRWL(2)+SFRWL(3)+SFRWL(4))
	2667	falb1=falb_dir(:,1,:)
	2668	falb2=falb_dir(:,2,:)SFRWL(2)+falb_dir(:,3,:)SFRWL(3) &
	2669	+falb_dir(:,4,:)*SFRWL(4)
	2670	falb2=falb2/(SFRWL(2)+SFRWL(3)+SFRWL(4))
[2692]	2671	CASE(6)
[2469]	2672	albsol1=albsol_dir(:,1)SFRWL(1)+albsol_dir(:,2)SFRWL(2) &
	2673	+albsol_dir(:,3)*SFRWL(3)
	2674	albsol1=albsol1/(SFRWL(1)+SFRWL(2)+SFRWL(3))
	2675	albsol2=albsol_dir(:,4)SFRWL(4)+albsol_dir(:,5)SFRWL(5) &
	2676	+albsol_dir(:,6)*SFRWL(6)
	2677	albsol2=albsol2/(SFRWL(4)+SFRWL(5)+SFRWL(6))
	2678	falb1=falb_dir(:,1,:)SFRWL(1)+falb_dir(:,2,:)SFRWL(2) &
	2679	+falb_dir(:,3,:)*SFRWL(3)
	2680	falb1=falb1/(SFRWL(1)+SFRWL(2)+SFRWL(3))
	2681	falb2=falb_dir(:,4,:)SFRWL(4)+falb_dir(:,5,:)SFRWL(5) &
	2682	+falb_dir(:,6,:)*SFRWL(6)
	2683	falb2=falb2/(SFRWL(4)+SFRWL(5)+SFRWL(6))
[2692]	2684	END SELECt
[2469]	2685	!albedo SB <<<
[2227]	2686
[766]	2687
[2469]	2688	CALL evappot(klon,nbsrf,ftsol,pplay(:,1),cdragh, &
	2689	t_seri(:,1),q_seri(:,1),u_seri(:,1),v_seri(:,1),evap_pot)
[1724]	2690
[2469]	2691	ENDIF
	2692	! =================================================================== c
	2693	! Calcul de Qsat
[881]	2694
[2469]	2695	DO k = 1, klev
	2696	DO i = 1, klon
	2697	zx_t = t_seri(i,k)
	2698	IF (thermcep) THEN
	2699	zdelta = MAX(0.,SIGN(1.,rtt-zx_t))
	2700	zx_qs = r2es * FOEEW(zx_t,zdelta)/pplay(i,k)
	2701	zx_qs = MIN(0.5,zx_qs)
	2702	zcor = 1./(1.-retv*zx_qs)
	2703	zx_qs = zx_qs*zcor
	2704	ELSE
	2705	!! IF (zx_t.LT.t_coup) THEN !jyg
	2706	IF (zx_t.LT.rtt) THEN !jyg
	2707	zx_qs = qsats(zx_t)/pplay(i,k)
	2708	ELSE
	2709	zx_qs = qsatl(zx_t)/pplay(i,k)
	2710	ENDIF
	2711	ENDIF
	2712	zqsat(i,k)=zx_qs
	2713	ENDDO
	2714	ENDDO
[959]	2715
[2692]	2716	IF (prt_level.ge.1) THEN
[2469]	2717	write(lunout,*) 'L qsat (g/kg) avant clouds_gno'
	2718	write(lunout,'(i4,f15.4)') (k,1000.*zqsat(igout,k),k=1,klev)
[2692]	2719	ENDIF
[2469]	2720	!
	2721	! Appeler la convection (au choix)
	2722	!
	2723	DO k = 1, klev
	2724	DO i = 1, klon
	2725	conv_q(i,k) = d_q_dyn(i,k) &
[3435]	2726	+ d_q_vdf(i,k)/phys_tstep
[2469]	2727	conv_t(i,k) = d_t_dyn(i,k) &
[3435]	2728	+ d_t_vdf(i,k)/phys_tstep
[2469]	2729	ENDDO
	2730	ENDDO
	2731	IF (check) THEN
	2732	za = qcheck(klon,klev,paprs,q_seri,ql_seri,cell_area)
	2733	WRITE(lunout,*) "avantcon=", za
	2734	ENDIF
	2735	zx_ajustq = .FALSE.
	2736	IF (iflag_con.EQ.2) zx_ajustq=.TRUE.
	2737	IF (zx_ajustq) THEN
	2738	DO i = 1, klon
	2739	z_avant(i) = 0.0
	2740	ENDDO
	2741	DO k = 1, klev
	2742	DO i = 1, klon
	2743	z_avant(i) = z_avant(i) + (q_seri(i,k)+ql_seri(i,k)) &
	2744	*(paprs(i,k)-paprs(i,k+1))/RG
	2745	ENDDO
	2746	ENDDO
	2747	ENDIF
[959]	2748
[2469]	2749	! Calcule de vitesse verticale a partir de flux de masse verticale
	2750	DO k = 1, klev
	2751	DO i = 1, klon
	2752	omega(i,k) = RG*flxmass_w(i,k) / cell_area(i)
[2692]	2753	ENDDO
	2754	ENDDO
	2755
	2756	IF (prt_level.ge.1) write(lunout,*) 'omega(igout, :) = ', &
[2469]	2757	omega(igout, :)
[2707]	2758	!
	2759	! Appel de la convection tous les "cvpas"
	2760	!
[3150]	2761	!!jyg IF (MOD(itapcv,cvpas).EQ.0) THEN
[3151]	2762	!! print *,' physiq : itapcv, cvpas, itap-1, cvpas_0 ', &
	2763	!! itapcv, cvpas, itap-1, cvpas_0
[3150]	2764	IF (MOD(itapcv,cvpas).EQ.0 .OR. MOD(itap-1,cvpas_0).EQ.0) THEN
[2707]	2765
[3134]	2766	!
	2767	! Mettre a zero des variables de sortie (pour securite)
	2768	!
	2769	pmflxr(:,:) = 0.
	2770	pmflxs(:,:) = 0.
	2771	wdtrainA(:,:) = 0.
[3496]	2772	wdtrainS(:,:) = 0.
[3134]	2773	wdtrainM(:,:) = 0.
	2774	upwd(:,:) = 0.
	2775	dnwd(:,:) = 0.
	2776	ep(:,:) = 0.
	2777	da(:,:)=0.
	2778	mp(:,:)=0.
	2779	wght_cvfd(:,:)=0.
	2780	phi(:,:,:)=0.
	2781	phi2(:,:,:)=0.
	2782	epmlmMm(:,:,:)=0.
	2783	eplaMm(:,:)=0.
	2784	d1a(:,:)=0.
	2785	dam(:,:)=0.
	2786	elij(:,:,:)=0.
	2787	ev(:,:)=0.
[3496]	2788	qtaa(:,:)=0.
[3134]	2789	clw(:,:)=0.
	2790	sij(:,:,:)=0.
	2791	!
[2469]	2792	IF (iflag_con.EQ.1) THEN
	2793	abort_message ='reactiver le call conlmd dans physiq.F'
	2794	CALL abort_physic (modname,abort_message,1)
[3435]	2795	! CALL conlmd (phys_tstep, paprs, pplay, t_seri, q_seri, conv_q,
[2469]	2796	! . d_t_con, d_q_con,
	2797	! . rain_con, snow_con, ibas_con, itop_con)
	2798	ELSE IF (iflag_con.EQ.2) THEN
[3435]	2799	CALL conflx(phys_tstep, paprs, pplay, t_seri, q_seri, &
[2469]	2800	conv_t, conv_q, -evap, omega, &
	2801	d_t_con, d_q_con, rain_con, snow_con, &
	2802	pmfu, pmfd, pen_u, pde_u, pen_d, pde_d, &
	2803	kcbot, kctop, kdtop, pmflxr, pmflxs)
	2804	d_u_con = 0.
	2805	d_v_con = 0.
[879]	2806
[2469]	2807	WHERE (rain_con < 0.) rain_con = 0.
	2808	WHERE (snow_con < 0.) snow_con = 0.
	2809	DO i = 1, klon
	2810	ibas_con(i) = klev+1 - kcbot(i)
	2811	itop_con(i) = klev+1 - kctop(i)
	2812	ENDDO
	2813	ELSE IF (iflag_con.GE.3) THEN
	2814	! nb of tracers for the KE convection:
	2815	! MAF la partie traceurs est faite dans phytrac
	2816	! on met ntra=1 pour limiter les appels mais on peut
	2817	! supprimer les calculs / ftra.
	2818	ntra = 1
	2819
	2820	!=======================================================================
	2821	!ajout pour la parametrisation des poches froides: calcul de
[2635]	2822	!t_w et t_x: si pas de poches froides, t_w=t_x=t_seri
[2692]	2823	IF (iflag_wake>=1) THEN
	2824	DO k=1,klev
	2825	DO i=1,klon
	2826	t_w(i,k) = t_seri(i,k) + (1-wake_s(i))*wake_deltat(i,k)
	2827	q_w(i,k) = q_seri(i,k) + (1-wake_s(i))*wake_deltaq(i,k)
	2828	t_x(i,k) = t_seri(i,k) - wake_s(i)*wake_deltat(i,k)
	2829	q_x(i,k) = q_seri(i,k) - wake_s(i)*wake_deltaq(i,k)
	2830	ENDDO
	2831	ENDDO
	2832	ELSE
	2833	t_w(:,:) = t_seri(:,:)
[2635]	2834	q_w(:,:) = q_seri(:,:)
	2835	t_x(:,:) = t_seri(:,:)
	2836	q_x(:,:) = q_seri(:,:)
[2692]	2837	ENDIF
[2469]	2838	!
	2839	!jyg<
	2840	! Perform dry adiabatic adjustment on wake profile
	2841	! The corresponding tendencies are added to the convective tendencies
	2842	! after the call to the convective scheme.
	2843	IF (iflag_wake>=1) then
[2882]	2844	IF (iflag_adjwk >= 1) THEN
[2469]	2845	limbas(:) = 1
[2635]	2846	CALL ajsec(paprs, pplay, t_w, q_w, limbas, &
[2309]	2847	d_t_adjwk, d_q_adjwk)
[2638]	2848	!
	2849	DO k=1,klev
	2850	DO i=1,klon
	2851	IF (wake_s(i) .GT. 1.e-3) THEN
	2852	t_w(i,k) = t_w(i,k) + d_t_adjwk(i,k)
	2853	q_w(i,k) = q_w(i,k) + d_q_adjwk(i,k)
	2854	d_deltat_ajs_cv(i,k) = d_t_adjwk(i,k)
	2855	d_deltaq_ajs_cv(i,k) = d_q_adjwk(i,k)
	2856	ELSE
	2857	d_deltat_ajs_cv(i,k) = 0.
	2858	d_deltaq_ajs_cv(i,k) = 0.
	2859	ENDIF
	2860	ENDDO
[2469]	2861	ENDDO
[2882]	2862	IF (iflag_adjwk == 2) THEN
	2863	CALL add_wake_tend &
[3208]	2864	(d_deltat_ajs_cv, d_deltaq_ajs_cv, dsig0, ddens0, ddens0, wkoccur1, 'ajs_cv', abortphy)
[2882]	2865	ENDIF ! (iflag_adjwk == 2)
	2866	ENDIF ! (iflag_adjwk >= 1)
[2469]	2867	ENDIF ! (iflag_wake>=1)
	2868	!>jyg
	2869	!
[2638]	2870
	2871	!! print *,'physiq. q_w(1,k), q_x(1,k) ', &
	2872	!! (k, q_w(1,k), q_x(1,k),k=1,25)
	2873
[2513]	2874	!jyg<
[3435]	2875	CALL alpale( debut, itap, phys_tstep, paprs, omega, t_seri, &
[2513]	2876	alp_offset, it_wape_prescr, wape_prescr, fip_prescr, &
	2877	ale_bl_prescr, alp_bl_prescr, &
	2878	wake_pe, wake_fip, &
	2879	Ale_bl, Ale_bl_trig, Alp_bl, &
[2554]	2880	Ale, Alp , Ale_wake, Alp_wake)
[2513]	2881	!>jyg
	2882	!
[2469]	2883	! sb, oct02:
	2884	! Schema de convection modularise et vectorise:
	2885	! (driver commun aux versions 3 et 4)
	2886	!
	2887	IF (ok_cvl) THEN ! new driver for convectL
	2888	!
	2889	!jyg<
	2890	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	2891	! Calculate the upmost level of deep convection loops: k_upper_cv
	2892	! (near 22 km)
	2893	k_upper_cv = klev
[3199]	2894	!izero = klon/2+1/klon
	2895	!DO k = klev,1,-1
	2896	! IF (pphi(izero,k) > 22.e4) k_upper_cv = k
	2897	!ENDDO
	2898	! FH : nouveau calcul base sur un profil global sans quoi
	2899	! le modele etait sensible au decoupage de domaines
[2469]	2900	DO k = klev,1,-1
[3199]	2901	IF (-7*log(presnivs(k)/presnivs(1)) > 25.) k_upper_cv = k
[2469]	2902	ENDDO
	2903	IF (prt_level .ge. 5) THEN
	2904	Print *, 'upmost level of deep convection loops: k_upper_cv = ', &
	2905	k_upper_cv
	2906	ENDIF
	2907	!
	2908	!>jyg
	2909	IF (type_trac == 'repr') THEN
	2910	nbtr_tmp=ntra
	2911	ELSE
	2912	nbtr_tmp=nbtr
[2692]	2913	ENDIF
[2469]	2914	!jyg iflag_con est dans clesphys
	2915	!c CALL concvl (iflag_con,iflag_clos,
	2916	CALL concvl (iflag_clos, &
[3435]	2917	phys_tstep, paprs, pplay, k_upper_cv, t_x,q_x, &
[2635]	2918	t_w,q_w,wake_s, &
[2469]	2919	u_seri,v_seri,tr_seri,nbtr_tmp, &
	2920	ALE,ALP, &
	2921	sig1,w01, &
	2922	d_t_con,d_q_con,d_u_con,d_v_con,d_tr, &
	2923	rain_con, snow_con, ibas_con, itop_con, sigd, &
[2824]	2924	ema_cbmf,plcl,plfc,wbeff,convoccur,upwd,dnwd,dnwd0, &
[3496]	2925	Ma,mipsh,Vprecip,cape,cin,tvp,Tconv,iflagctrl, &
[2469]	2926	pbase,bbase,dtvpdt1,dtvpdq1,dplcldt,dplcldr,qcondc,wd, &
	2927	! RomP >>>
	2928	!! . pmflxr,pmflxs,da,phi,mp,
	2929	!! . ftd,fqd,lalim_conv,wght_th)
[3496]	2930	pmflxr,pmflxs,da,phi,mp,phi2,d1a,dam,sij,qtaa,clw,elij, &
[2469]	2931	ftd,fqd,lalim_conv,wght_th, &
	2932	ev, ep,epmlmMm,eplaMm, &
[3496]	2933	wdtrainA, wdtrainS, wdtrainM,wght_cvfd,qtc_cv,sigt_cv, &
[2481]	2934	tau_cld_cv,coefw_cld_cv,epmax_diag)
[2630]	2935
[2469]	2936	! RomP <<<
[619]	2937
[2469]	2938	!IM begin
	2939	! print*,'physiq: cin pbase dnwd0 ftd fqd ',cin(1),pbase(1),
	2940	! .dnwd0(1,1),ftd(1,1),fqd(1,1)
	2941	!IM end
	2942	!IM cf. FH
	2943	clwcon0=qcondc
	2944	pmfu(:,:)=upwd(:,:)+dnwd(:,:)
[3150]	2945	!
	2946	!jyg<
	2947	! If convective tendencies are too large, then call convection
	2948	! every time step
	2949	cvpas = cvpas_0
	2950	DO k=1,k_upper_cv
	2951	DO i=1,klon
[3161]	2952	IF (d_t_con(i,k) > 6.721 .AND. d_t_con(i,k) < 6.722 .AND.&
	2953	d_q_con(i,k) > -.0002171 .AND. d_q_con(i,k) < -.0002170) THEN
	2954	dtcon_multistep_max = 3.
	2955	dqcon_multistep_max = 0.02
	2956	ENDIF
	2957	ENDDO
	2958	ENDDO
	2959	!
	2960	DO k=1,k_upper_cv
	2961	DO i=1,klon
[3150]	2962	!! IF (abs(d_t_con(i,k)) > 0.24 .OR. &
	2963	!! abs(d_q_con(i,k)) > 2.e-2) THEN
	2964	IF (abs(d_t_con(i,k)) > dtcon_multistep_max .OR. &
	2965	abs(d_q_con(i,k)) > dqcon_multistep_max) THEN
	2966	cvpas = 1
	2967	!! print *,'physiq1, i,k,d_t_con(i,k),d_q_con(i,k) ', &
	2968	!! i,k,d_t_con(i,k),d_q_con(i,k)
	2969	ENDIF
	2970	ENDDO
	2971	ENDDO
[3153]	2972	!!! Ligne a ne surtout pas remettre sans avoir murement reflechi (jyg)
	2973	!!! call bcast(cvpas)
	2974	!!! ------------------------------------------------------------
[3150]	2975	!>jyg
	2976	!
[2692]	2977	DO i = 1, klon
[3148]	2978	IF (iflagctrl(i).le.1) itau_con(i)=itau_con(i)+cvpas
[2692]	2979	ENDDO
[2469]	2980	!
	2981	!jyg<
	2982	! Add the tendency due to the dry adjustment of the wake profile
	2983	IF (iflag_wake>=1) THEN
[2882]	2984	IF (iflag_adjwk == 2) THEN
	2985	DO k=1,klev
	2986	DO i=1,klon
[3435]	2987	ftd(i,k) = ftd(i,k) + wake_s(i)*d_t_adjwk(i,k)/phys_tstep
	2988	fqd(i,k) = fqd(i,k) + wake_s(i)*d_q_adjwk(i,k)/phys_tstep
[2882]	2989	d_t_con(i,k) = d_t_con(i,k) + wake_s(i)*d_t_adjwk(i,k)
	2990	d_q_con(i,k) = d_q_con(i,k) + wake_s(i)*d_q_adjwk(i,k)
	2991	ENDDO
	2992	ENDDO
	2993	ENDIF ! (iflag_adjwk = 2)
	2994	ENDIF ! (iflag_wake>=1)
[2469]	2995	!>jyg
	2996	!
	2997	ELSE ! ok_cvl
[1412]	2998
[2469]	2999	! MAF conema3 ne contient pas les traceurs
[3435]	3000	CALL conema3 (phys_tstep, &
[2469]	3001	paprs,pplay,t_seri,q_seri, &
	3002	u_seri,v_seri,tr_seri,ntra, &
	3003	sig1,w01, &
	3004	d_t_con,d_q_con,d_u_con,d_v_con,d_tr, &
	3005	rain_con, snow_con, ibas_con, itop_con, &
	3006	upwd,dnwd,dnwd0,bas,top, &
	3007	Ma,cape,tvp,rflag, &
	3008	pbase &
	3009	,bbase,dtvpdt1,dtvpdq1,dplcldt,dplcldr &
	3010	,clwcon0)
[524]	3011
[2469]	3012	ENDIF ! ok_cvl
[524]	3013
[2469]	3014	!
	3015	! Correction precip
	3016	rain_con = rain_con * cvl_corr
	3017	snow_con = snow_con * cvl_corr
	3018	!
[766]	3019
[2469]	3020	IF (.NOT. ok_gust) THEN
	3021	do i = 1, klon
	3022	wd(i)=0.0
	3023	enddo
	3024	ENDIF
[524]	3025
[2469]	3026	! =================================================================== c
	3027	! Calcul des proprietes des nuages convectifs
	3028	!
[524]	3029
[2469]	3030	! calcul des proprietes des nuages convectifs
	3031	clwcon0(:,:)=fact_cldcon*clwcon0(:,:)
	3032	IF (iflag_cld_cv == 0) THEN
[2692]	3033	CALL clouds_gno &
[2469]	3034	(klon,klev,q_seri,zqsat,clwcon0,ptconv,ratqsc,rnebcon0)
	3035	ELSE
[2692]	3036	CALL clouds_bigauss &
[2469]	3037	(klon,klev,q_seri,zqsat,qtc_cv,sigt_cv,ptconv,ratqsc,rnebcon0)
	3038	ENDIF
[524]	3039
[2205]	3040
[2469]	3041	! =================================================================== c
[524]	3042
[2469]	3043	DO i = 1, klon
	3044	itop_con(i) = min(max(itop_con(i),1),klev)
	3045	ibas_con(i) = min(max(ibas_con(i),1),itop_con(i))
	3046	ENDDO
[1428]	3047
[2469]	3048	DO i = 1, klon
	3049	ema_pcb(i) = paprs(i,ibas_con(i))
	3050	ENDDO
	3051	DO i = 1, klon
	3052	! L'idicage de itop_con peut cacher un pb potentiel
	3053	! FH sous la dictee de JYG, CR
	3054	ema_pct(i) = paprs(i,itop_con(i)+1)
[879]	3055
[2692]	3056	IF (itop_con(i).gt.klev-3) THEN
	3057	IF (prt_level >= 9) THEN
[2469]	3058	write(lunout,*)'La convection monte trop haut '
	3059	write(lunout,*)'itop_con(,',i,',)=',itop_con(i)
[2692]	3060	ENDIF
	3061	ENDIF
[2469]	3062	ENDDO
	3063	ELSE IF (iflag_con.eq.0) THEN
	3064	write(lunout,*) 'On n appelle pas la convection'
	3065	clwcon0=0.
	3066	rnebcon0=0.
	3067	d_t_con=0.
	3068	d_q_con=0.
	3069	d_u_con=0.
	3070	d_v_con=0.
	3071	rain_con=0.
	3072	snow_con=0.
	3073	bas=1
	3074	top=1
	3075	ELSE
	3076	WRITE(lunout,*) "iflag_con non-prevu", iflag_con
[2692]	3077	CALL abort_physic("physiq", "", 1)
[2469]	3078	ENDIF
[524]	3079
[2469]	3080	! CALL homogene(paprs, q_seri, d_q_con, u_seri,v_seri,
	3081	! . d_u_con, d_v_con)
[524]	3082
[2730]	3083	!jyg Reinitialize proba_notrig and itapcv when convection has been called
	3084	proba_notrig(:) = 1.
[2707]	3085	itapcv = 0
[3150]	3086	ENDIF ! (MOD(itapcv,cvpas).EQ.0 .OR. MOD(itapcv,cvpas_0).EQ.0)
[2730]	3087	!
[2707]	3088	itapcv = itapcv+1
[3153]	3089	!
	3090	! Compter les steps ou cvpas=1
	3091	IF (cvpas == 1) THEN
	3092	Ncvpaseq1 = Ncvpaseq1+1
	3093	ENDIF
	3094	IF (mod(itap,1000) == 0) THEN
	3095	print *,' physiq, nombre de steps ou cvpas = 1 : ', Ncvpaseq1
	3096	ENDIF
[2707]	3097
[2812]	3098	!!!jyg Appel diagnostique a add_phys_tend pour tester la conservation de
	3099	!!! l'energie dans les courants satures.
	3100	!! d_t_con_sat(:,:) = d_t_con(:,:) - ftd(:,:)*dtime
	3101	!! d_q_con_sat(:,:) = d_q_con(:,:) - fqd(:,:)*dtime
	3102	!! dql_sat(:,:) = (wdtrainA(:,:)+wdtrainM(:,:))*dtime/zmasse(:,:)
	3103	!! CALL add_phys_tend(d_u_con, d_v_con, d_t_con_sat, d_q_con_sat, dql_sat, &
	3104	!! dqi0, paprs, 'convection_sat', abortphy, flag_inhib_tend,&
	3105	!! itap, 1)
	3106	!! call prt_enerbil('convection_sat',itap)
	3107	!!
	3108	!!
[2469]	3109	CALL add_phys_tend(d_u_con, d_v_con, d_t_con, d_q_con, dql0, dqi0, paprs, &
[2812]	3110	'convection',abortphy,flag_inhib_tend,itap,0)
[3461]	3111	CALL prt_enerbil('convection',itap)
[2235]	3112
[2469]	3113	!-------------------------------------------------------------------------
[766]	3114
[2692]	3115	IF (mydebug) THEN
	3116	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	3117	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	3118	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	3119	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	3120	ENDIF
[766]	3121
[2469]	3122	IF (check) THEN
	3123	za = qcheck(klon,klev,paprs,q_seri,ql_seri,cell_area)
	3124	WRITE(lunout,*)"aprescon=", za
	3125	zx_t = 0.0
	3126	za = 0.0
	3127	DO i = 1, klon
	3128	za = za + cell_area(i)/REAL(klon)
	3129	zx_t = zx_t + (rain_con(i)+ &
	3130	snow_con(i))*cell_area(i)/REAL(klon)
	3131	ENDDO
[3435]	3132	zx_t = zx_t/za*phys_tstep
[2469]	3133	WRITE(lunout,*)"Precip=", zx_t
	3134	ENDIF
	3135	IF (zx_ajustq) THEN
	3136	DO i = 1, klon
	3137	z_apres(i) = 0.0
	3138	ENDDO
	3139	DO k = 1, klev
	3140	DO i = 1, klon
	3141	z_apres(i) = z_apres(i) + (q_seri(i,k)+ql_seri(i,k)) &
	3142	*(paprs(i,k)-paprs(i,k+1))/RG
	3143	ENDDO
	3144	ENDDO
	3145	DO i = 1, klon
[3435]	3146	z_factor(i) = (z_avant(i)-(rain_con(i)+snow_con(i))*phys_tstep) &
[2469]	3147	/z_apres(i)
	3148	ENDDO
	3149	DO k = 1, klev
	3150	DO i = 1, klon
	3151	IF (z_factor(i).GT.(1.0+1.0E-08) .OR. &
	3152	z_factor(i).LT.(1.0-1.0E-08)) THEN
	3153	q_seri(i,k) = q_seri(i,k) * z_factor(i)
	3154	ENDIF
	3155	ENDDO
	3156	ENDDO
	3157	ENDIF
	3158	zx_ajustq=.FALSE.
[879]	3159
[2469]	3160	!
	3161	!==========================================================================
	3162	!RR:Evolution de la poche froide: on ne fait pas de separation wake/env
	3163	!pour la couche limite diffuse pour l instant
	3164	!
	3165	!
	3166	! nrlmd le 22/03/2011---Si on met les poches hors des thermiques
	3167	! il faut rajouter cette tendance calcul\'ee hors des poches
	3168	! froides
	3169	!
[2692]	3170	IF (iflag_wake>=1) THEN
[2707]	3171	!
	3172	!
[2730]	3173	! Call wakes every "wkpas" step
	3174	!
	3175	IF (MOD(itapwk,wkpas).EQ.0) THEN
	3176	!
	3177	DO k=1,klev
[2469]	3178	DO i=1,klon
[2730]	3179	dt_dwn(i,k) = ftd(i,k)
	3180	dq_dwn(i,k) = fqd(i,k)
	3181	M_dwn(i,k) = dnwd0(i,k)
	3182	M_up(i,k) = upwd(i,k)
[3435]	3183	dt_a(i,k) = d_t_con(i,k)/phys_tstep - ftd(i,k)
	3184	dq_a(i,k) = d_q_con(i,k)/phys_tstep - fqd(i,k)
[2469]	3185	ENDDO
	3186	ENDDO
[2730]	3187
	3188	IF (iflag_wake==2) THEN
	3189	ok_wk_lsp(:)=max(sign(1.,wake_s(:)-wake_s_min_lsp),0.)
	3190	DO k = 1,klev
	3191	dt_dwn(:,k)= dt_dwn(:,k)+ &
[3435]	3192	ok_wk_lsp(:)*(d_t_eva(:,k)+d_t_lsc(:,k))/phys_tstep
[2730]	3193	dq_dwn(:,k)= dq_dwn(:,k)+ &
[3435]	3194	ok_wk_lsp(:)*(d_q_eva(:,k)+d_q_lsc(:,k))/phys_tstep
[2730]	3195	ENDDO
	3196	ELSEIF (iflag_wake==3) THEN
	3197	ok_wk_lsp(:)=max(sign(1.,wake_s(:)-wake_s_min_lsp),0.)
	3198	DO k = 1,klev
	3199	DO i=1,klon
	3200	IF (rneb(i,k)==0.) THEN
	3201	! On ne tient compte des tendances qu'en dehors des
	3202	! nuages (c'est-\`a-dire a priri dans une region ou
	3203	! l'eau se reevapore).
	3204	dt_dwn(i,k)= dt_dwn(i,k)+ &
[3435]	3205	ok_wk_lsp(i)*d_t_lsc(i,k)/phys_tstep
[2730]	3206	dq_dwn(i,k)= dq_dwn(i,k)+ &
[3435]	3207	ok_wk_lsp(i)*d_q_lsc(i,k)/phys_tstep
[2730]	3208	ENDIF
	3209	ENDDO
	3210	ENDDO
	3211	ENDIF
	3212
	3213	!
	3214	!calcul caracteristiques de la poche froide
[3435]	3215	CALL calWAKE (iflag_wake_tend, paprs, pplay, phys_tstep, &
[2730]	3216	t_seri, q_seri, omega, &
	3217	dt_dwn, dq_dwn, M_dwn, M_up, &
[3208]	3218	dt_a, dq_a, cv_gen, &
	3219	sigd, cin, &
	3220	wake_deltat, wake_deltaq, wake_s, awake_dens, wake_dens, &
[2730]	3221	wake_dth, wake_h, &
[3000]	3222	!! wake_pe, wake_fip, wake_gfl, &
	3223	wake_pe, wake_fip_0, wake_gfl, & !! jyg
[2730]	3224	d_t_wake, d_q_wake, &
	3225	wake_k, t_x, q_x, &
	3226	wake_omgbdth, wake_dp_omgb, &
	3227	wake_dtKE, wake_dqKE, &
	3228	wake_omg, wake_dp_deltomg, &
	3229	wake_spread, wake_Cstar, d_deltat_wk_gw, &
[3208]	3230	d_deltat_wk, d_deltaq_wk, d_s_wk, d_dens_a_wk, d_dens_wk)
[2730]	3231	!
	3232	!jyg Reinitialize itapwk when wakes have been called
	3233	itapwk = 0
	3234	ENDIF ! (MOD(itapwk,wkpas).EQ.0)
[2469]	3235	!
[2730]	3236	itapwk = itapwk+1
[2469]	3237	!
	3238	!-----------------------------------------------------------------------
	3239	! ajout des tendances des poches froides
	3240	CALL add_phys_tend(du0,dv0,d_t_wake,d_q_wake,dql0,dqi0,paprs,'wake', &
[2812]	3241	abortphy,flag_inhib_tend,itap,0)
[3461]	3242	CALL prt_enerbil('wake',itap)
[2469]	3243	!------------------------------------------------------------------------
[879]	3244
[2730]	3245	! Increment Wake state variables
[2635]	3246	IF (iflag_wake_tend .GT. 0.) THEN
	3247
	3248	CALL add_wake_tend &
[3208]	3249	(d_deltat_wk, d_deltaq_wk, d_s_wk, d_dens_a_wk, d_dens_wk, wake_k, &
[2635]	3250	'wake', abortphy)
[3461]	3251	CALL prt_enerbil('wake',itap)
[2635]	3252	ENDIF ! (iflag_wake_tend .GT. 0.)
[3179]	3253	!
	3254	IF (prt_level .GE. 10) THEN
	3255	print *,' physiq, after calwake, wake_s: ',wake_s(:)
	3256	print *,' physiq, after calwake, wake_deltat: ',wake_deltat(:,1)
	3257	print *,' physiq, after calwake, wake_deltaq: ',wake_deltaq(:,1)
	3258	ENDIF
[2635]	3259
[3000]	3260	IF (iflag_alp_wk_cond .GT. 0.) THEN
	3261
[3435]	3262	CALL alpale_wk(phys_tstep, cell_area, wake_k, wake_s, wake_dens, wake_fip_0, &
[3000]	3263	wake_fip)
	3264	ELSE
	3265	wake_fip(:) = wake_fip_0(:)
	3266	ENDIF ! (iflag_alp_wk_cond .GT. 0.)
	3267
[2692]	3268	ENDIF ! (iflag_wake>=1)
[2469]	3269	!
	3270	!===================================================================
	3271	! Convection seche (thermiques ou ajustement)
	3272	!===================================================================
	3273	!
[2692]	3274	CALL stratocu_if(klon,klev,pctsrf,paprs, pplay,t_seri &
[2469]	3275	,seuil_inversion,weak_inversion,dthmin)
[878]	3276
	3277
	3278
[2469]	3279	d_t_ajsb(:,:)=0.
	3280	d_q_ajsb(:,:)=0.
	3281	d_t_ajs(:,:)=0.
	3282	d_u_ajs(:,:)=0.
	3283	d_v_ajs(:,:)=0.
	3284	d_q_ajs(:,:)=0.
	3285	clwcon0th(:,:)=0.
	3286	!
	3287	! fm_therm(:,:)=0.
	3288	! entr_therm(:,:)=0.
	3289	! detr_therm(:,:)=0.
	3290	!
[2692]	3291	IF (prt_level>9) WRITE(lunout,*) &
[2469]	3292	'AVANT LA CONVECTION SECHE , iflag_thermals=' &
	3293	,iflag_thermals,' nsplit_thermals=',nsplit_thermals
[2692]	3294	IF (iflag_thermals<0) THEN
[2469]	3295	! Rien
	3296	! ====
[2692]	3297	IF (prt_level>9) WRITE(lunout,*)'pas de convection seche'
[541]	3298
[878]	3299
[2692]	3300	ELSE
[878]	3301
[2469]	3302	! Thermiques
	3303	! ==========
[2692]	3304	IF (prt_level>9) WRITE(lunout,*)'JUSTE AVANT , iflag_thermals=' &
[2469]	3305	,iflag_thermals,' nsplit_thermals=',nsplit_thermals
[878]	3306
	3307
[2469]	3308	!cc nrlmd le 10/04/2012
	3309	DO k=1,klev+1
	3310	DO i=1,klon
	3311	pbl_tke_input(i,k,is_oce)=pbl_tke(i,k,is_oce)
	3312	pbl_tke_input(i,k,is_ter)=pbl_tke(i,k,is_ter)
	3313	pbl_tke_input(i,k,is_lic)=pbl_tke(i,k,is_lic)
	3314	pbl_tke_input(i,k,is_sic)=pbl_tke(i,k,is_sic)
[2159]	3315	ENDDO
[2469]	3316	ENDDO
	3317	!cc fin nrlmd le 10/04/2012
[1403]	3318
[2692]	3319	IF (iflag_thermals>=1) THEN
[2469]	3320	!jyg<
[2852]	3321	!! IF (mod(iflag_pbl_split/2,2) .EQ. 1) THEN
	3322	IF (mod(iflag_pbl_split/10,10) .GE. 1) THEN
[2469]	3323	! Appel des thermiques avec les profils exterieurs aux poches
	3324	DO k=1,klev
	3325	DO i=1,klon
	3326	t_therm(i,k) = t_seri(i,k) - wake_s(i)*wake_deltat(i,k)
	3327	q_therm(i,k) = q_seri(i,k) - wake_s(i)*wake_deltaq(i,k)
[2606]	3328	u_therm(i,k) = u_seri(i,k)
	3329	v_therm(i,k) = v_seri(i,k)
[2469]	3330	ENDDO
	3331	ENDDO
	3332	ELSE
	3333	! Appel des thermiques avec les profils moyens
	3334	DO k=1,klev
	3335	DO i=1,klon
	3336	t_therm(i,k) = t_seri(i,k)
	3337	q_therm(i,k) = q_seri(i,k)
[2606]	3338	u_therm(i,k) = u_seri(i,k)
	3339	v_therm(i,k) = v_seri(i,k)
[2469]	3340	ENDDO
	3341	ENDDO
	3342	ENDIF
	3343	!>jyg
[2692]	3344	CALL calltherm(pdtphys &
[2469]	3345	,pplay,paprs,pphi,weak_inversion &
[2606]	3346	! ,u_seri,v_seri,t_seri,q_seri,zqsat,debut & !jyg
	3347	,u_therm,v_therm,t_therm,q_therm,zqsat,debut & !jyg
[2469]	3348	,d_u_ajs,d_v_ajs,d_t_ajs,d_q_ajs &
	3349	,fm_therm,entr_therm,detr_therm &
	3350	,zqasc,clwcon0th,lmax_th,ratqscth &
	3351	,ratqsdiff,zqsatth &
	3352	!on rajoute ale et alp, et les
	3353	!caracteristiques de la couche alim
	3354	,Ale_bl,Alp_bl,lalim_conv,wght_th, zmax0, f0, zw2,fraca &
	3355	,ztv,zpspsk,ztla,zthl &
	3356	!cc nrlmd le 10/04/2012
	3357	,pbl_tke_input,pctsrf,omega,cell_area &
	3358	,zlcl_th,fraca0,w0,w_conv,therm_tke_max0,env_tke_max0 &
	3359	,n2,s2,ale_bl_stat &
	3360	,therm_tke_max,env_tke_max &
	3361	,alp_bl_det,alp_bl_fluct_m,alp_bl_fluct_tke &
	3362	,alp_bl_conv,alp_bl_stat &
	3363	!cc fin nrlmd le 10/04/2012
	3364	,zqla,ztva )
	3365	!
	3366	!jyg<
[2852]	3367	!!jyg IF (mod(iflag_pbl_split/2,2) .EQ. 1) THEN
	3368	IF (mod(iflag_pbl_split/10,10) .GE. 1) THEN
[2469]	3369	! Si les thermiques ne sont presents que hors des
	3370	! poches, la tendance moyenne associ\'ee doit etre
	3371	! multipliee par la fraction surfacique qu'ils couvrent.
	3372	DO k=1,klev
	3373	DO i=1,klon
	3374	!
[2635]	3375	d_deltat_the(i,k) = - d_t_ajs(i,k)
	3376	d_deltaq_the(i,k) = - d_q_ajs(i,k)
[2469]	3377	!
	3378	d_u_ajs(i,k) = d_u_ajs(i,k)*(1.-wake_s(i))
	3379	d_v_ajs(i,k) = d_v_ajs(i,k)*(1.-wake_s(i))
	3380	d_t_ajs(i,k) = d_t_ajs(i,k)*(1.-wake_s(i))
	3381	d_q_ajs(i,k) = d_q_ajs(i,k)*(1.-wake_s(i))
	3382	!
	3383	ENDDO
	3384	ENDDO
[2606]	3385	!
[3180]	3386	IF (ok_bug_split_th) THEN
	3387	CALL add_wake_tend &
[3208]	3388	(d_deltat_the, d_deltaq_the, dsig0, ddens0, ddens0, wkoccur1, 'the', abortphy)
[3180]	3389	ELSE
	3390	CALL add_wake_tend &
[3208]	3391	(d_deltat_the, d_deltaq_the, dsig0, ddens0, ddens0, wake_k, 'the', abortphy)
[3180]	3392	ENDIF
[3461]	3393	CALL prt_enerbil('the',itap)
[2638]	3394	!
[2852]	3395	ENDIF ! (mod(iflag_pbl_split/10,10) .GE. 1)
[2638]	3396	!
[2606]	3397	CALL add_phys_tend(d_u_ajs,d_v_ajs,d_t_ajs,d_q_ajs, &
[2812]	3398	dql0,dqi0,paprs,'thermals', abortphy,flag_inhib_tend,itap,0)
[3461]	3399	CALL prt_enerbil('thermals',itap)
[2606]	3400	!
[2513]	3401	!
[3435]	3402	CALL alpale_th( phys_tstep, lmax_th, t_seri, cell_area, &
[2513]	3403	cin, s2, n2, &
	3404	ale_bl_trig, ale_bl_stat, ale_bl, &
[2556]	3405	alp_bl, alp_bl_stat, &
[3208]	3406	proba_notrig, random_notrig, cv_gen)
[2635]	3407	!>jyg
[1638]	3408
[2554]	3409	! ------------------------------------------------------------------
	3410	! Transport de la TKE par les panaches thermiques.
	3411	! FH : 2010/02/01
	3412	! if (iflag_pbl.eq.10) then
	3413	! call thermcell_dtke(klon,klev,nbsrf,pdtphys,fm_therm,entr_therm,
	3414	! s rg,paprs,pbl_tke)
	3415	! endif
	3416	! -------------------------------------------------------------------
	3417
[2692]	3418	DO i=1,klon
[2469]	3419	! zmax_th(i)=pphi(i,lmax_th(i))/rg
	3420	!CR:04/05/12:correction calcul zmax
	3421	zmax_th(i)=zmax0(i)
[2692]	3422	ENDDO
[1507]	3423
[2692]	3424	ENDIF
[878]	3425
[2469]	3426	! Ajustement sec
	3427	! ==============
[878]	3428
[2469]	3429	! Dans le cas o\`u on active les thermiques, on fait partir l'ajustement
	3430	! a partir du sommet des thermiques.
	3431	! Dans le cas contraire, on demarre au niveau 1.
[878]	3432
[2692]	3433	IF (iflag_thermals>=13.or.iflag_thermals<=0) THEN
[878]	3434
[2692]	3435	IF (iflag_thermals.eq.0) THEN
	3436	IF (prt_level>9) WRITE(lunout,*)'ajsec'
[2469]	3437	limbas(:)=1
[2692]	3438	ELSE
[2469]	3439	limbas(:)=lmax_th(:)
[2692]	3440	ENDIF
[878]	3441
[2469]	3442	! Attention : le call ajsec_convV2 n'est maintenu que momentanneement
	3443	! pour des test de convergence numerique.
	3444	! Le nouveau ajsec est a priori mieux, meme pour le cas
	3445	! iflag_thermals = 0 (l'ancienne version peut faire des tendances
	3446	! non nulles numeriquement pour des mailles non concernees.
[878]	3447
[2692]	3448	IF (iflag_thermals==0) THEN
[2469]	3449	! Calling adjustment alone (but not the thermal plume model)
	3450	CALL ajsec_convV2(paprs, pplay, t_seri,q_seri &
	3451	, d_t_ajsb, d_q_ajsb)
[2692]	3452	ELSE IF (iflag_thermals>0) THEN
[2469]	3453	! Calling adjustment above the top of thermal plumes
	3454	CALL ajsec(paprs, pplay, t_seri,q_seri,limbas &
	3455	, d_t_ajsb, d_q_ajsb)
[2692]	3456	ENDIF
[878]	3457
[2469]	3458	!--------------------------------------------------------------------
	3459	! ajout des tendances de l'ajustement sec ou des thermiques
	3460	CALL add_phys_tend(du0,dv0,d_t_ajsb,d_q_ajsb,dql0,dqi0,paprs, &
[2812]	3461	'ajsb',abortphy,flag_inhib_tend,itap,0)
[3461]	3462	CALL prt_enerbil('ajsb',itap)
[2469]	3463	d_t_ajs(:,:)=d_t_ajs(:,:)+d_t_ajsb(:,:)
	3464	d_q_ajs(:,:)=d_q_ajs(:,:)+d_q_ajsb(:,:)
[904]	3465
[2469]	3466	!---------------------------------------------------------------------
[878]	3467
[2692]	3468	ENDIF
[524]	3469
[2692]	3470	ENDIF
[2469]	3471	!
	3472	!===================================================================
	3473	! Computation of ratqs, the width (normalized) of the subrid scale
	3474	! water distribution
	3475	CALL calcratqs(klon,klev,prt_level,lunout, &
	3476	iflag_ratqs,iflag_con,iflag_cld_th,pdtphys, &
[2534]	3477	ratqsbas,ratqshaut,ratqsp0, ratqsdp, &
	3478	tau_ratqs,fact_cldcon, &
[2469]	3479	ptconv,ptconvth,clwcon0th, rnebcon0th, &
	3480	paprs,pplay,q_seri,zqsat,fm_therm, &
	3481	ratqs,ratqsc)
[1032]	3482
[2100]	3483
[2469]	3484	!
	3485	! Appeler le processus de condensation a grande echelle
	3486	! et le processus de precipitation
	3487	!-------------------------------------------------------------------------
	3488	IF (prt_level .GE.10) THEN
	3489	print *,'itap, ->fisrtilp ',itap
	3490	ENDIF
	3491	!
[3435]	3492	CALL fisrtilp(phys_tstep,paprs,pplay, &
[2469]	3493	t_seri, q_seri,ptconv,ratqs, &
	3494	d_t_lsc, d_q_lsc, d_ql_lsc, d_qi_lsc, rneb, cldliq, &
	3495	rain_lsc, snow_lsc, &
	3496	pfrac_impa, pfrac_nucl, pfrac_1nucl, &
	3497	frac_impa, frac_nucl, beta_prec_fisrt, &
	3498	prfl, psfl, rhcl, &
	3499	zqasc, fraca,ztv,zpspsk,ztla,zthl,iflag_cld_th, &
	3500	iflag_ice_thermo)
	3501	!
	3502	WHERE (rain_lsc < 0) rain_lsc = 0.
	3503	WHERE (snow_lsc < 0) snow_lsc = 0.
[766]	3504
[2799]	3505	!+JLD
	3506	! write(*,9000) 'phys lsc',"enerbil: bil_q, bil_e,",rain_lsc+snow_lsc &
	3507	! & ,((rcw-rcpd)rain_lsc + (rcs-rcpd)snow_lsc)t_seri(1,1)-rlvttrain_lsc+rlstt*snow_lsc &
	3508	! & ,rain_lsc,snow_lsc
	3509	! write(*,9000) "rcpv","rcw",rcpv,rcw,rcs,t_seri(1,1)
	3510	!-JLD
[2469]	3511	CALL add_phys_tend(du0,dv0,d_t_lsc,d_q_lsc,d_ql_lsc,d_qi_lsc,paprs, &
[2812]	3512	'lsc',abortphy,flag_inhib_tend,itap,0)
[3461]	3513	CALL prt_enerbil('lsc',itap)
[2613]	3514	rain_num(:)=0.
[2657]	3515	DO k = 1, klev
[2613]	3516	DO i = 1, klon
	3517	IF (ql_seri(i,k)>oliqmax) THEN
	3518	rain_num(i)=rain_num(i)+(ql_seri(i,k)-oliqmax)*zmasse(i,k)/pdtphys
	3519	ql_seri(i,k)=oliqmax
	3520	ENDIF
	3521	ENDDO
	3522	ENDDO
[2657]	3523	IF (nqo==3) THEN
	3524	DO k = 1, klev
	3525	DO i = 1, klon
	3526	IF (qs_seri(i,k)>oicemax) THEN
	3527	rain_num(i)=rain_num(i)+(qs_seri(i,k)-oicemax)*zmasse(i,k)/pdtphys
	3528	qs_seri(i,k)=oicemax
	3529	ENDIF
	3530	ENDDO
	3531	ENDDO
	3532	ENDIF
[2613]	3533
[2524]	3534	!---------------------------------------------------------------------------
[2469]	3535	DO k = 1, klev
	3536	DO i = 1, klon
	3537	cldfra(i,k) = rneb(i,k)
	3538	!CR: a quoi ca sert? Faut-il ajouter qs_seri?
	3539	IF (.NOT.new_oliq) cldliq(i,k) = ql_seri(i,k)
	3540	ENDDO
	3541	ENDDO
	3542	IF (check) THEN
	3543	za = qcheck(klon,klev,paprs,q_seri,ql_seri,cell_area)
	3544	WRITE(lunout,*)"apresilp=", za
	3545	zx_t = 0.0
	3546	za = 0.0
	3547	DO i = 1, klon
	3548	za = za + cell_area(i)/REAL(klon)
	3549	zx_t = zx_t + (rain_lsc(i) &
	3550	+ snow_lsc(i))*cell_area(i)/REAL(klon)
	3551	ENDDO
[3435]	3552	zx_t = zx_t/za*phys_tstep
[2469]	3553	WRITE(lunout,*)"Precip=", zx_t
	3554	ENDIF
[766]	3555
[2692]	3556	IF (mydebug) THEN
	3557	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	3558	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	3559	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	3560	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	3561	ENDIF
[524]	3562
[2469]	3563	!
	3564	!-------------------------------------------------------------------
	3565	! PRESCRIPTION DES NUAGES POUR LE RAYONNEMENT
	3566	!-------------------------------------------------------------------
[524]	3567
[2469]	3568	! 1. NUAGES CONVECTIFS
	3569	!
	3570	!IM cf FH
	3571	! IF (iflag_cld_th.eq.-1) THEN ! seulement pour Tiedtke
	3572	IF (iflag_cld_th.le.-1) THEN ! seulement pour Tiedtke
	3573	snow_tiedtke=0.
	3574	! print*,'avant calcul de la pseudo precip '
	3575	! print*,'iflag_cld_th',iflag_cld_th
[2692]	3576	IF (iflag_cld_th.eq.-1) THEN
[2469]	3577	rain_tiedtke=rain_con
[2692]	3578	ELSE
[2469]	3579	! print*,'calcul de la pseudo precip '
	3580	rain_tiedtke=0.
	3581	! print*,'calcul de la pseudo precip 0'
[2692]	3582	DO k=1,klev
	3583	DO i=1,klon
	3584	IF (d_q_con(i,k).lt.0.) THEN
[2469]	3585	rain_tiedtke(i)=rain_tiedtke(i)-d_q_con(i,k)/pdtphys &
	3586	*(paprs(i,k)-paprs(i,k+1))/rg
[2692]	3587	ENDIF
	3588	ENDDO
	3589	ENDDO
	3590	ENDIF
[2469]	3591	!
	3592	! call dump2d(iim,jjm,rain_tiedtke(2:klon-1),'PSEUDO PRECIP ')
	3593	!
[524]	3594
[2469]	3595	! Nuages diagnostiques pour Tiedtke
	3596	CALL diagcld1(paprs,pplay, &
	3597	!IM cf FH. rain_con,snow_con,ibas_con,itop_con,
	3598	rain_tiedtke,snow_tiedtke,ibas_con,itop_con, &
	3599	diafra,dialiq)
	3600	DO k = 1, klev
	3601	DO i = 1, klon
	3602	IF (diafra(i,k).GT.cldfra(i,k)) THEN
	3603	cldliq(i,k) = dialiq(i,k)
	3604	cldfra(i,k) = diafra(i,k)
	3605	ENDIF
	3606	ENDDO
	3607	ENDDO
[524]	3608
[2469]	3609	ELSE IF (iflag_cld_th.ge.3) THEN
	3610	! On prend pour les nuages convectifs le max du calcul de la
	3611	! convection et du calcul du pas de temps precedent diminue d'un facteur
	3612	! facttemps
	3613	facteur = pdtphys *facttemps
[2692]	3614	DO k=1,klev
	3615	DO i=1,klon
[2469]	3616	rnebcon(i,k)=rnebcon(i,k)*facteur
[2692]	3617	IF (rnebcon0(i,k)clwcon0(i,k).GT.rnebcon(i,k)clwcon(i,k)) THEN
[2469]	3618	rnebcon(i,k)=rnebcon0(i,k)
	3619	clwcon(i,k)=clwcon0(i,k)
[2692]	3620	ENDIF
	3621	ENDDO
	3622	ENDDO
[2469]	3623
	3624	! On prend la somme des fractions nuageuses et des contenus en eau
[524]	3625
[2692]	3626	IF (iflag_cld_th>=5) THEN
[1411]	3627
[2692]	3628	DO k=1,klev
[2469]	3629	ptconvth(:,k)=fm_therm(:,k+1)>0.
[2692]	3630	ENDDO
[1496]	3631
[2692]	3632	IF (iflag_coupl==4) THEN
[1496]	3633
[2469]	3634	! Dans le cas iflag_coupl==4, on prend la somme des convertures
	3635	! convectives et lsc dans la partie des thermiques
	3636	! Le controle par iflag_coupl est peut etre provisoire.
[2692]	3637	DO k=1,klev
	3638	DO i=1,klon
	3639	IF (ptconv(i,k).AND.ptconvth(i,k)) THEN
[2469]	3640	cldliq(i,k)=cldliq(i,k)+rnebcon(i,k)*clwcon(i,k)
	3641	cldfra(i,k)=min(cldfra(i,k)+rnebcon(i,k),1.)
[2692]	3642	ELSE IF (ptconv(i,k)) THEN
[2469]	3643	cldfra(i,k)=rnebcon(i,k)
	3644	cldliq(i,k)=rnebcon(i,k)*clwcon(i,k)
[2692]	3645	ENDIF
	3646	ENDDO
	3647	ENDDO
[1496]	3648
[2692]	3649	ELSE IF (iflag_coupl==5) THEN
	3650	DO k=1,klev
	3651	DO i=1,klon
[2469]	3652	cldfra(i,k)=min(cldfra(i,k)+rnebcon(i,k),1.)
	3653	cldliq(i,k)=cldliq(i,k)+rnebcon(i,k)*clwcon(i,k)
[2692]	3654	ENDDO
	3655	ENDDO
[1525]	3656
[2692]	3657	ELSE
[1525]	3658
[2469]	3659	! Si on est sur un point touche par la convection
	3660	! profonde et pas par les thermiques, on prend la
	3661	! couverture nuageuse et l'eau nuageuse de la convection
	3662	! profonde.
[1411]	3663
[2469]	3664	!IM/FH: 2011/02/23
	3665	! definition des points sur lesquels ls thermiques sont actifs
[1496]	3666
[2692]	3667	DO k=1,klev
	3668	DO i=1,klon
	3669	IF (ptconv(i,k).AND. .NOT.ptconvth(i,k)) THEN
[2469]	3670	cldfra(i,k)=rnebcon(i,k)
	3671	cldliq(i,k)=rnebcon(i,k)*clwcon(i,k)
[2692]	3672	ENDIF
	3673	ENDDO
	3674	ENDDO
[1496]	3675
[2692]	3676	ENDIF
[1496]	3677
[2692]	3678	ELSE
[1496]	3679
[2469]	3680	! Ancienne version
	3681	cldfra(:,:)=min(max(cldfra(:,:),rnebcon(:,:)),1.)
	3682	cldliq(:,:)=cldliq(:,:)+rnebcon(:,:)*clwcon(:,:)
[2692]	3683	ENDIF
[1411]	3684
[2469]	3685	ENDIF
[1507]	3686
[2469]	3687	! plulsc(:)=0.
	3688	! do k=1,klev,-1
	3689	! do i=1,klon
	3690	! zzz=prfl(:,k)+psfl(:,k)
	3691	! if (.not.ptconvth.zzz.gt.0.)
	3692	! enddo prfl, psfl,
	3693	! enddo
	3694	!
	3695	! 2. NUAGES STARTIFORMES
	3696	!
	3697	IF (ok_stratus) THEN
	3698	CALL diagcld2(paprs,pplay,t_seri,q_seri, diafra,dialiq)
	3699	DO k = 1, klev
	3700	DO i = 1, klon
	3701	IF (diafra(i,k).GT.cldfra(i,k)) THEN
	3702	cldliq(i,k) = dialiq(i,k)
	3703	cldfra(i,k) = diafra(i,k)
	3704	ENDIF
	3705	ENDDO
	3706	ENDDO
	3707	ENDIF
	3708	!
	3709	! Precipitation totale
	3710	!
	3711	DO i = 1, klon
	3712	rain_fall(i) = rain_con(i) + rain_lsc(i)
	3713	snow_fall(i) = snow_con(i) + snow_lsc(i)
	3714	ENDDO
	3715	!
	3716	! Calculer l'humidite relative pour diagnostique
	3717	!
	3718	DO k = 1, klev
	3719	DO i = 1, klon
	3720	zx_t = t_seri(i,k)
	3721	IF (thermcep) THEN
	3722	!! if (iflag_ice_thermo.eq.0) then !jyg
	3723	zdelta = MAX(0.,SIGN(1.,rtt-zx_t))
	3724	!! else !jyg
	3725	!! zdelta = MAX(0.,SIGN(1.,t_glace_min-zx_t)) !jyg
	3726	!! endif !jyg
	3727	zx_qs = r2es * FOEEW(zx_t,zdelta)/pplay(i,k)
	3728	zx_qs = MIN(0.5,zx_qs)
	3729	zcor = 1./(1.-retv*zx_qs)
	3730	zx_qs = zx_qs*zcor
	3731	ELSE
	3732	!! IF (zx_t.LT.t_coup) THEN !jyg
	3733	IF (zx_t.LT.rtt) THEN !jyg
	3734	zx_qs = qsats(zx_t)/pplay(i,k)
	3735	ELSE
	3736	zx_qs = qsatl(zx_t)/pplay(i,k)
	3737	ENDIF
	3738	ENDIF
	3739	zx_rh(i,k) = q_seri(i,k)/zx_qs
[3784]	3740	IF (iflag_ice_thermo .GT. 0) THEN
[3780]	3741	zx_rhl(i,k) = q_seri(i,k)/(qsatl(zx_t)/pplay(i,k))
	3742	zx_rhi(i,k) = q_seri(i,k)/(qsats(zx_t)/pplay(i,k))
[3784]	3743	ENDIF
[2469]	3744	zqsat(i,k)=zx_qs
	3745	ENDDO
	3746	ENDDO
[782]	3747
[2469]	3748	!IM Calcul temp.potentielle a 2m (tpot) et temp. potentielle
	3749	! equivalente a 2m (tpote) pour diagnostique
	3750	!
	3751	DO i = 1, klon
	3752	tpot(i)=zt2m(i)(100000./paprs(i,1))*RKAPPA
	3753	IF (thermcep) THEN
	3754	IF(zt2m(i).LT.RTT) then
	3755	Lheat=RLSTT
	3756	ELSE
	3757	Lheat=RLVTT
	3758	ENDIF
	3759	ELSE
	3760	IF (zt2m(i).LT.RTT) THEN
	3761	Lheat=RLSTT
	3762	ELSE
	3763	Lheat=RLVTT
	3764	ENDIF
	3765	ENDIF
	3766	tpote(i) = tpot(i)* &
	3767	EXP((Lheat qsat2m(i))/(RCPDzt2m(i)))
	3768	ENDDO
[524]	3769
[2469]	3770	IF (type_trac == 'inca') THEN
[524]	3771	#ifdef INCA
[2469]	3772	CALL VTe(VTphysiq)
	3773	CALL VTb(VTinca)
	3774	calday = REAL(days_elapsed + 1) + jH_cur
[524]	3775
[3435]	3776	CALL chemtime(itap+itau_phy-1, date0, phys_tstep, itap)
[3563]	3777	CALL AEROSOL_METEO_CALC( &
	3778	calday,pdtphys,pplay,paprs,t,pmflxr,pmflxs, &
	3779	prfl,psfl,pctsrf,cell_area, &
	3780	latitude_deg,longitude_deg,u10m,v10m)
[524]	3781
[2469]	3782	zxsnow_dummy(:) = 0.0
[625]	3783
[2469]	3784	CALL chemhook_begin (calday, &
	3785	days_elapsed+1, &
	3786	jH_cur, &
	3787	pctsrf(1,1), &
	3788	latitude_deg, &
	3789	longitude_deg, &
	3790	cell_area, &
	3791	paprs, &
	3792	pplay, &
	3793	coefh(1:klon,1:klev,is_ave), &
	3794	pphi, &
	3795	t_seri, &
	3796	u, &
	3797	v, &
[3613]	3798	rot, &
[2469]	3799	wo(:, :, 1), &
	3800	q_seri, &
	3801	zxtsol, &
[3613]	3802	zt2m, &
[2469]	3803	zxsnow_dummy, &
	3804	solsw, &
	3805	albsol1, &
	3806	rain_fall, &
	3807	snow_fall, &
	3808	itop_con, &
	3809	ibas_con, &
	3810	cldfra, &
	3811	nbp_lon, &
	3812	nbp_lat-1, &
	3813	tr_seri, &
	3814	ftsol, &
	3815	paprs, &
	3816	cdragh, &
	3817	cdragm, &
	3818	pctsrf, &
	3819	pdtphys, &
	3820	itap)
[616]	3821
[2469]	3822	CALL VTe(VTinca)
	3823	CALL VTb(VTphysiq)
[959]	3824	#endif
[2692]	3825	ENDIF !type_trac = inca
[3666]	3826	IF (type_trac == 'repr') THEN
	3827	#ifdef REPROBUS
	3828	!CALL chemtime_rep(itap+itau_phy-1, date0, dtime, itap)
	3829	CALL chemtime_rep(itap+itau_phy-1, date0, phys_tstep, itap)
	3830	#endif
	3831	ENDIF
[2618]	3832
[2469]	3833	!
[2618]	3834	! Appeler le rayonnement mais calculer tout d'abord l'albedo du sol.
	3835	!
	3836	IF (MOD(itaprad,radpas).EQ.0) THEN
[959]	3837
[2618]	3838	!
	3839	!jq - introduce the aerosol direct and first indirect radiative forcings
	3840	!jq - Johannes Quaas, 27/11/2003 (quaas@lmd.jussieu.fr)
[2738]	3841	IF (flag_aerosol .GT. 0) THEN
[2618]	3842	IF (iflag_rrtm .EQ. 0) THEN !--old radiation
	3843	IF (.NOT. aerosol_couple) THEN
	3844	!
	3845	CALL readaerosol_optic( &
[3630]	3846	debut, flag_aerosol, itap, jD_cur-jD_ref, &
[2618]	3847	pdtphys, pplay, paprs, t_seri, rhcl, presnivs, &
	3848	mass_solu_aero, mass_solu_aero_pi, &
	3849	tau_aero, piz_aero, cg_aero, &
	3850	tausum_aero, tau3d_aero)
	3851	ENDIF
	3852	ELSE ! RRTM radiation
	3853	IF (aerosol_couple .AND. config_inca == 'aero' ) THEN
	3854	abort_message='config_inca=aero et rrtm=1 impossible'
[2692]	3855	CALL abort_physic(modname,abort_message,1)
[2618]	3856	ELSE
	3857	!
	3858	#ifdef CPP_RRTM
	3859	IF (NSW.EQ.6) THEN
[2738]	3860	!--new aerosol properties SW and LW
[2618]	3861	!
[2753]	3862	#ifdef CPP_Dust
	3863	!--SPL aerosol model
	3864	CALL splaerosol_optic_rrtm( ok_alw, pplay, paprs, t_seri, rhcl, &
	3865	tr_seri, mass_solu_aero, mass_solu_aero_pi, &
	3866	tau_aero_sw_rrtm, piz_aero_sw_rrtm, cg_aero_sw_rrtm, &
	3867	tausum_aero, tau3d_aero)
	3868	#else
	3869	!--climatologies or INCA aerosols
[3480]	3870	CALL readaerosol_optic_rrtm( debut, aerosol_couple, ok_alw, ok_volcan, &
[3630]	3871	flag_aerosol, flag_bc_internal_mixture, itap, jD_cur-jD_ref, &
[2618]	3872	pdtphys, pplay, paprs, t_seri, rhcl, presnivs, &
	3873	tr_seri, mass_solu_aero, mass_solu_aero_pi, &
	3874	tau_aero_sw_rrtm, piz_aero_sw_rrtm, cg_aero_sw_rrtm, &
[2854]	3875	tausum_aero, drytausum_aero, tau3d_aero)
[2753]	3876	#endif
[3274]	3877
	3878	IF (flag_aerosol .EQ. 7) THEN
	3879	CALL MACv2SP(pphis,pplay,paprs,longitude_deg,latitude_deg, &
	3880	tau_aero_sw_rrtm,piz_aero_sw_rrtm,cg_aero_sw_rrtm)
	3881	ENDIF
	3882
[2738]	3883	!
[2618]	3884	ELSE IF (NSW.EQ.2) THEN
	3885	!--for now we use the old aerosol properties
	3886	!
	3887	CALL readaerosol_optic( &
[3630]	3888	debut, flag_aerosol, itap, jD_cur-jD_ref, &
[2618]	3889	pdtphys, pplay, paprs, t_seri, rhcl, presnivs, &
	3890	mass_solu_aero, mass_solu_aero_pi, &
	3891	tau_aero, piz_aero, cg_aero, &
	3892	tausum_aero, tau3d_aero)
	3893	!
	3894	!--natural aerosols
	3895	tau_aero_sw_rrtm(:,:,1,:)=tau_aero(:,:,3,:)
	3896	piz_aero_sw_rrtm(:,:,1,:)=piz_aero(:,:,3,:)
	3897	cg_aero_sw_rrtm (:,:,1,:)=cg_aero (:,:,3,:)
	3898	!--all aerosols
	3899	tau_aero_sw_rrtm(:,:,2,:)=tau_aero(:,:,2,:)
	3900	piz_aero_sw_rrtm(:,:,2,:)=piz_aero(:,:,2,:)
	3901	cg_aero_sw_rrtm (:,:,2,:)=cg_aero (:,:,2,:)
[2738]	3902	!
	3903	!--no LW optics
	3904	tau_aero_lw_rrtm(:,:,:,:) = 1.e-15
	3905	!
[2618]	3906	ELSE
	3907	abort_message='Only NSW=2 or 6 are possible with ' &
	3908	// 'aerosols and iflag_rrtm=1'
[2692]	3909	CALL abort_physic(modname,abort_message,1)
[2618]	3910	ENDIF
	3911	#else
	3912	abort_message='You should compile with -rrtm if running ' &
	3913	// 'with iflag_rrtm=1'
[2692]	3914	CALL abort_physic(modname,abort_message,1)
[2618]	3915	#endif
	3916	!
	3917	ENDIF
	3918	ENDIF
[2738]	3919	ELSE !--flag_aerosol = 0
[2618]	3920	tausum_aero(:,:,:) = 0.
[2854]	3921	drytausum_aero(:,:) = 0.
[2640]	3922	mass_solu_aero(:,:) = 0.
	3923	mass_solu_aero_pi(:,:) = 0.
[2618]	3924	IF (iflag_rrtm .EQ. 0) THEN !--old radiation
	3925	tau_aero(:,:,:,:) = 1.e-15
	3926	piz_aero(:,:,:,:) = 1.
	3927	cg_aero(:,:,:,:) = 0.
	3928	ELSE
	3929	tau_aero_sw_rrtm(:,:,:,:) = 1.e-15
	3930	tau_aero_lw_rrtm(:,:,:,:) = 1.e-15
	3931	piz_aero_sw_rrtm(:,:,:,:) = 1.0
	3932	cg_aero_sw_rrtm(:,:,:,:) = 0.0
	3933	ENDIF
	3934	ENDIF
	3935	!
[2994]	3936	!--WMO criterion to determine tropopause
[3123]	3937	CALL stratosphere_mask(missing_val, pphis, t_seri, pplay, latitude_deg)
[2994]	3938	!
[2618]	3939	!--STRAT AEROSOL
	3940	!--updates tausum_aero,tau_aero,piz_aero,cg_aero
	3941	IF (flag_aerosol_strat.GT.0) THEN
	3942	IF (prt_level .GE.10) THEN
	3943	PRINT *,'appel a readaerosolstrat', mth_cur
	3944	ENDIF
	3945	IF (iflag_rrtm.EQ.0) THEN
	3946	IF (flag_aerosol_strat.EQ.1) THEN
	3947	CALL readaerosolstrato(debut)
	3948	ELSE
	3949	abort_message='flag_aerosol_strat must equal 1 for rrtm=0'
	3950	CALL abort_physic(modname,abort_message,1)
	3951	ENDIF
	3952	ELSE
[2009]	3953	#ifdef CPP_RRTM
[2690]	3954	#ifndef CPP_StratAer
	3955	!--prescribed strat aerosols
	3956	!--only in the case of non-interactive strat aerosols
[2618]	3957	IF (flag_aerosol_strat.EQ.1) THEN
	3958	CALL readaerosolstrato1_rrtm(debut)
	3959	ELSEIF (flag_aerosol_strat.EQ.2) THEN
[3480]	3960	CALL readaerosolstrato2_rrtm(debut, ok_volcan)
[2618]	3961	ELSE
	3962	abort_message='flag_aerosol_strat must equal 1 or 2 for rrtm=1'
	3963	CALL abort_physic(modname,abort_message,1)
	3964	ENDIF
[2690]	3965	#endif
[2618]	3966	#else
	3967	abort_message='You should compile with -rrtm if running ' &
	3968	// 'with iflag_rrtm=1'
	3969	CALL abort_physic(modname,abort_message,1)
	3970	#endif
	3971	ENDIF
[3567]	3972	ELSE
	3973	tausum_aero(:,:,id_STRAT_phy) = 0.
[2618]	3974	ENDIF
[2690]	3975	!
	3976	#ifdef CPP_RRTM
	3977	#ifdef CPP_StratAer
[2692]	3978	!--compute stratospheric mask
[3123]	3979	CALL stratosphere_mask(missing_val, pphis, t_seri, pplay, latitude_deg)
[2690]	3980	!--interactive strat aerosols
	3981	CALL calcaerosolstrato_rrtm(pplay,t_seri,paprs,debut)
	3982	#endif
	3983	#endif
[2618]	3984	!--fin STRAT AEROSOL
	3985	!
	3986
	3987	! Calculer les parametres optiques des nuages et quelques
	3988	! parametres pour diagnostiques:
	3989	!
	3990	IF (aerosol_couple.AND.config_inca=='aero') THEN
	3991	mass_solu_aero(:,:) = ccm(:,:,1)
	3992	mass_solu_aero_pi(:,:) = ccm(:,:,2)
[2692]	3993	ENDIF
[2618]	3994
	3995	IF (ok_newmicro) then
	3996	IF (iflag_rrtm.NE.0) THEN
	3997	#ifdef CPP_RRTM
	3998	IF (ok_cdnc.AND.NRADLP.NE.3) THEN
[2469]	3999	abort_message='RRTM choix incoherent NRADLP doit etre egal a 3 ' &
	4000	// 'pour ok_cdnc'
[2618]	4001	CALL abort_physic(modname,abort_message,1)
	4002	ENDIF
[2009]	4003	#else
	4004
[2618]	4005	abort_message='You should compile with -rrtm if running with '//'iflag_rrtm=1'
	4006	CALL abort_physic(modname,abort_message,1)
[2009]	4007	#endif
[2618]	4008	ENDIF
[3274]	4009	CALL newmicro (flag_aerosol, ok_cdnc, bl95_b0, bl95_b1, &
[2618]	4010	paprs, pplay, t_seri, cldliq, cldfra, &
	4011	cldtau, cldemi, cldh, cldl, cldm, cldt, cldq, &
	4012	flwp, fiwp, flwc, fiwc, &
	4013	mass_solu_aero, mass_solu_aero_pi, &
	4014	cldtaupi, re, fl, ref_liq, ref_ice, &
	4015	ref_liq_pi, ref_ice_pi)
	4016	ELSE
	4017	CALL nuage (paprs, pplay, &
	4018	t_seri, cldliq, cldfra, cldtau, cldemi, &
	4019	cldh, cldl, cldm, cldt, cldq, &
	4020	ok_aie, &
	4021	mass_solu_aero, mass_solu_aero_pi, &
	4022	bl95_b0, bl95_b1, &
	4023	cldtaupi, re, fl)
[2469]	4024	ENDIF
	4025	!
[2618]	4026	!IM betaCRF
[2469]	4027	!
[2618]	4028	cldtaurad = cldtau
	4029	cldtaupirad = cldtaupi
	4030	cldemirad = cldemi
	4031	cldfrarad = cldfra
	4032
[2469]	4033	!
[2618]	4034	IF (lon1_beta.EQ.-180..AND.lon2_beta.EQ.180..AND. &
	4035	lat1_beta.EQ.90..AND.lat2_beta.EQ.-90.) THEN
	4036	!
	4037	! global
	4038	!
[3048]	4039	!IM 251017 begin
[3317]	4040	! print*,'physiq betaCRF global zdtime=',zdtime
[3048]	4041	!IM 251017 end
[2618]	4042	DO k=1, klev
	4043	DO i=1, klon
	4044	IF (pplay(i,k).GE.pfree) THEN
[2469]	4045	beta(i,k) = beta_pbl
[2618]	4046	ELSE
[2469]	4047	beta(i,k) = beta_free
[2618]	4048	ENDIF
	4049	IF (mskocean_beta) THEN
[2469]	4050	beta(i,k) = beta(i,k) * pctsrf(i,is_oce)
[2618]	4051	ENDIF
[2469]	4052	cldtaurad(i,k) = cldtau(i,k) * beta(i,k)
	4053	cldtaupirad(i,k) = cldtaupi(i,k) * beta(i,k)
	4054	cldemirad(i,k) = cldemi(i,k) * beta(i,k)
	4055	cldfrarad(i,k) = cldfra(i,k) * beta(i,k)
[2618]	4056	ENDDO
	4057	ENDDO
	4058	!
	4059	ELSE
	4060	!
	4061	! regional
	4062	!
	4063	DO k=1, klev
	4064	DO i=1,klon
	4065	!
	4066	IF (longitude_deg(i).ge.lon1_beta.AND. &
	4067	longitude_deg(i).le.lon2_beta.AND. &
	4068	latitude_deg(i).le.lat1_beta.AND. &
	4069	latitude_deg(i).ge.lat2_beta) THEN
	4070	IF (pplay(i,k).GE.pfree) THEN
	4071	beta(i,k) = beta_pbl
	4072	ELSE
	4073	beta(i,k) = beta_free
	4074	ENDIF
	4075	IF (mskocean_beta) THEN
	4076	beta(i,k) = beta(i,k) * pctsrf(i,is_oce)
	4077	ENDIF
	4078	cldtaurad(i,k) = cldtau(i,k) * beta(i,k)
	4079	cldtaupirad(i,k) = cldtaupi(i,k) * beta(i,k)
	4080	cldemirad(i,k) = cldemi(i,k) * beta(i,k)
	4081	cldfrarad(i,k) = cldfra(i,k) * beta(i,k)
	4082	ENDIF
[2469]	4083	!
[2618]	4084	ENDDO
[2469]	4085	ENDDO
	4086	!
[2618]	4087	ENDIF
[766]	4088
[2618]	4089	!lecture de la chlorophylle pour le nouvel albedo de Sunghye Baek
	4090	IF (ok_chlorophyll) THEN
[2469]	4091	print*,"-- reading chlorophyll"
[2618]	4092	CALL readchlorophyll(debut)
	4093	ENDIF
[1863]	4094
[2524]	4095	!--if ok_suntime_rrtm we use ancillay data for RSUN
	4096	!--previous values are therefore overwritten
	4097	!--this is needed for CMIP6 runs
	4098	!--and only possible for new radiation scheme
	4099	IF (iflag_rrtm.EQ.1.AND.ok_suntime_rrtm) THEN
[2525]	4100	#ifdef CPP_RRTM
[2524]	4101	CALL read_rsun_rrtm(debut)
[2525]	4102	#endif
[2524]	4103	ENDIF
	4104
[2692]	4105	IF (mydebug) THEN
	4106	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	4107	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	4108	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	4109	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	4110	ENDIF
[2524]	4111
[2469]	4112	!
	4113	!sonia : If Iflag_radia >=2, pertubation of some variables
	4114	!input to radiation (DICE)
	4115	!
	4116	IF (iflag_radia .ge. 2) THEN
	4117	zsav_tsol (:) = zxtsol(:)
[2692]	4118	CALL perturb_radlwsw(zxtsol,iflag_radia)
[2469]	4119	ENDIF
[2328]	4120
[2469]	4121	IF (aerosol_couple.AND.config_inca=='aero') THEN
[959]	4122	#ifdef INCA
[2469]	4123	CALL radlwsw_inca &
[3338]	4124	(chemistry_couple, kdlon,kflev,dist, rmu0, fract, solaire, &
[2469]	4125	paprs, pplay,zxtsol,albsol1, albsol2, t_seri,q_seri, &
[2684]	4126	size(wo,3), wo, &
[2469]	4127	cldfrarad, cldemirad, cldtaurad, &
	4128	heat,heat0,cool,cool0,albpla, &
	4129	topsw,toplw,solsw,sollw, &
	4130	sollwdown, &
	4131	topsw0,toplw0,solsw0,sollw0, &
	4132	lwdn0, lwdn, lwup0, lwup, &
	4133	swdn0, swdn, swup0, swup, &
	4134	ok_ade, ok_aie, &
	4135	tau_aero, piz_aero, cg_aero, &
	4136	topswad_aero, solswad_aero, &
	4137	topswad0_aero, solswad0_aero, &
	4138	topsw_aero, topsw0_aero, &
	4139	solsw_aero, solsw0_aero, &
	4140	cldtaupirad, &
	4141	topswai_aero, solswai_aero)
[955]	4142	#endif
[2469]	4143	ELSE
	4144	!
	4145	!IM calcul radiatif pour le cas actuel
	4146	!
	4147	RCO2 = RCO2_act
	4148	RCH4 = RCH4_act
	4149	RN2O = RN2O_act
	4150	RCFC11 = RCFC11_act
	4151	RCFC12 = RCFC12_act
[3450]	4152	!
	4153	!--interactive CO2 in ppm from carbon cycle
	4154	IF (carbon_cycle_rad.AND..NOT.debut) THEN
	4155	RCO2=RCO2_glo
	4156	ENDIF
[2469]	4157	!
	4158	IF (prt_level .GE.10) THEN
	4159	print *,' ->radlwsw, number 1 '
	4160	ENDIF
	4161	!
	4162	CALL radlwsw &
	4163	(dist, rmu0, fract, &
	4164	!albedo SB >>>
	4165	! paprs, pplay,zxtsol,albsol1, albsol2, &
	4166	paprs, pplay,zxtsol,SFRWL,albsol_dir, albsol_dif, &
	4167	!albedo SB <<<
	4168	t_seri,q_seri,wo, &
	4169	cldfrarad, cldemirad, cldtaurad, &
[3479]	4170	ok_ade.OR.flag_aerosol_strat.GT.0, ok_aie, ok_volcan, &
	4171	flag_aerosol, &
[3412]	4172	flag_aerosol_strat, flag_aer_feedback, &
[2469]	4173	tau_aero, piz_aero, cg_aero, &
	4174	tau_aero_sw_rrtm, piz_aero_sw_rrtm, cg_aero_sw_rrtm, &
	4175	! Rajoute par OB pour RRTM
	4176	tau_aero_lw_rrtm, &
[3630]	4177	cldtaupirad, &
[3048]	4178	! zqsat, flwcrad, fiwcrad, &
[2469]	4179	zqsat, flwc, fiwc, &
	4180	ref_liq, ref_ice, ref_liq_pi, ref_ice_pi, &
	4181	heat,heat0,cool,cool0,albpla, &
[3479]	4182	heat_volc,cool_volc, &
[3756]	4183	topsw,toplw,solsw,solswfdiff,sollw, &
[2469]	4184	sollwdown, &
	4185	topsw0,toplw0,solsw0,sollw0, &
[3106]	4186	lwdnc0, lwdn0, lwdn, lwupc0, lwup0, lwup, &
[3082]	4187	swdnc0, swdn0, swdn, swupc0, swup0, swup, &
[2469]	4188	topswad_aero, solswad_aero, &
	4189	topswai_aero, solswai_aero, &
	4190	topswad0_aero, solswad0_aero, &
	4191	topsw_aero, topsw0_aero, &
	4192	solsw_aero, solsw0_aero, &
	4193	topswcf_aero, solswcf_aero, &
	4194	!-C. Kleinschmitt for LW diagnostics
	4195	toplwad_aero, sollwad_aero,&
	4196	toplwai_aero, sollwai_aero, &
	4197	toplwad0_aero, sollwad0_aero,&
	4198	!-end
	4199	ZLWFT0_i, ZFLDN0, ZFLUP0, &
[3117]	4200	ZSWFT0_i, ZFSDN0, ZFSUP0)
[879]	4201
[3048]	4202	!lwoff=y, betalwoff=1. : offset LW CRE for radiation code and other
	4203	!schemes
	4204	toplw = toplw + betalwoff * (toplw0 - toplw)
	4205	sollw = sollw + betalwoff * (sollw0 - sollw)
	4206	lwdn = lwdn + betalwoff * (lwdn0 - lwdn)
	4207	lwup = lwup + betalwoff * (lwup0 - lwup)
	4208	sollwdown(:)= sollwdown(:) + betalwoff (-1.ZFLDN0(:,1) - &
	4209	sollwdown(:))
	4210	cool = cool + betalwoff * (cool0 - cool)
	4211
[2679]	4212	#ifndef CPP_XIOS
	4213	!--OB 30/05/2016 modified 21/10/2016
[2854]	4214	!--here we return swaero_diag and dryaod_diag to FALSE
[2529]	4215	!--and histdef will switch it back to TRUE if necessary
	4216	!--this is necessary to get the right swaero at first step
[2679]	4217	!--but only in the case of no XIOS as XIOS is covered elsewhere
[3082]	4218	IF (debut) swaerofree_diag = .FALSE.
[2529]	4219	IF (debut) swaero_diag = .FALSE.
[2854]	4220	IF (debut) dryaod_diag = .FALSE.
[2989]	4221	!--IM 15/09/2017 here we return ok_4xCO2atm to FALSE
	4222	!--as for swaero_diag, see above
	4223	IF (debut) ok_4xCO2atm = .FALSE.
[3149]	4224
[2469]	4225	!
	4226	!IM 2eme calcul radiatif pour le cas perturbe ou au moins un
	4227	!IM des taux doit etre different du taux actuel
	4228	!IM Par defaut on a les taux perturbes egaux aux taux actuels
	4229	!
[2989]	4230	IF (RCO2_per.NE.RCO2_act.OR. &
	4231	RCH4_per.NE.RCH4_act.OR. &
	4232	RN2O_per.NE.RN2O_act.OR. &
	4233	RCFC11_per.NE.RCFC11_act.OR. &
	4234	RCFC12_per.NE.RCFC12_act) ok_4xCO2atm =.TRUE.
[3149]	4235	#endif
[2989]	4236	!
[2692]	4237	IF (ok_4xCO2atm) THEN
[2469]	4238	!
	4239	RCO2 = RCO2_per
	4240	RCH4 = RCH4_per
	4241	RN2O = RN2O_per
	4242	RCFC11 = RCFC11_per
	4243	RCFC12 = RCFC12_per
	4244	!
	4245	IF (prt_level .GE.10) THEN
	4246	print *,' ->radlwsw, number 2 '
	4247	ENDIF
	4248	!
	4249	CALL radlwsw &
	4250	(dist, rmu0, fract, &
	4251	!albedo SB >>>
	4252	! paprs, pplay,zxtsol,albsol1, albsol2, &
	4253	paprs, pplay,zxtsol,SFRWL,albsol_dir, albsol_dif, &
	4254	!albedo SB <<<
	4255	t_seri,q_seri,wo, &
[2640]	4256	cldfrarad, cldemirad, cldtaurad, &
[3479]	4257	ok_ade.OR.flag_aerosol_strat.GT.0, ok_aie, ok_volcan, &
	4258	flag_aerosol, &
[3412]	4259	flag_aerosol_strat, flag_aer_feedback, &
[2469]	4260	tau_aero, piz_aero, cg_aero, &
	4261	tau_aero_sw_rrtm, piz_aero_sw_rrtm, cg_aero_sw_rrtm, &
	4262	! Rajoute par OB pour RRTM
	4263	tau_aero_lw_rrtm, &
[3630]	4264	cldtaupi, &
[3048]	4265	! zqsat, flwcrad, fiwcrad, &
[2469]	4266	zqsat, flwc, fiwc, &
	4267	ref_liq, ref_ice, ref_liq_pi, ref_ice_pi, &
	4268	heatp,heat0p,coolp,cool0p,albplap, &
[3479]	4269	heat_volc,cool_volc, &
[3756]	4270	topswp,toplwp,solswp,solswfdiffp,sollwp, &
[2469]	4271	sollwdownp, &
	4272	topsw0p,toplw0p,solsw0p,sollw0p, &
[3106]	4273	lwdnc0p, lwdn0p, lwdnp, lwupc0p, lwup0p, lwupp, &
[3082]	4274	swdnc0p, swdn0p, swdnp, swupc0p, swup0p, swupp, &
[2469]	4275	topswad_aerop, solswad_aerop, &
	4276	topswai_aerop, solswai_aerop, &
	4277	topswad0_aerop, solswad0_aerop, &
	4278	topsw_aerop, topsw0_aerop, &
	4279	solsw_aerop, solsw0_aerop, &
	4280	topswcf_aerop, solswcf_aerop, &
	4281	!-C. Kleinschmitt for LW diagnostics
	4282	toplwad_aerop, sollwad_aerop,&
	4283	toplwai_aerop, sollwai_aerop, &
	4284	toplwad0_aerop, sollwad0_aerop,&
	4285	!-end
	4286	ZLWFT0_i, ZFLDN0, ZFLUP0, &
[3117]	4287	ZSWFT0_i, ZFSDN0, ZFSUP0)
[3048]	4288	endif !ok_4xCO2atm
[2469]	4289	ENDIF ! aerosol_couple
	4290	itaprad = 0
	4291	!
	4292	! If Iflag_radia >=2, reset pertubed variables
	4293	!
	4294	IF (iflag_radia .ge. 2) THEN
	4295	zxtsol(:) = zsav_tsol (:)
	4296	ENDIF
	4297	ENDIF ! MOD(itaprad,radpas)
	4298	itaprad = itaprad + 1
[879]	4299
[2469]	4300	IF (iflag_radia.eq.0) THEN
	4301	IF (prt_level.ge.9) THEN
	4302	PRINT *,'--------------------------------------------------'
	4303	PRINT *,'>>>> ATTENTION rayonnement desactive pour ce cas'
	4304	PRINT *,'>>>> heat et cool mis a zero '
	4305	PRINT *,'--------------------------------------------------'
[2692]	4306	ENDIF
[2469]	4307	heat=0.
	4308	cool=0.
	4309	sollw=0. ! MPL 01032011
	4310	solsw=0.
	4311	radsol=0.
	4312	swup=0. ! MPL 27102011 pour les fichiers AMMA_profiles et AMMA_scalars
	4313	swup0=0.
	4314	lwup=0.
	4315	lwup0=0.
	4316	lwdn=0.
	4317	lwdn0=0.
[2692]	4318	ENDIF
[782]	4319
[2469]	4320	!
	4321	! Calculer radsol a l'exterieur de radlwsw
	4322	! pour prendre en compte le cycle diurne
	4323	! recode par Olivier Boucher en sept 2015
	4324	!
	4325	radsol=solsw*swradcorr+sollw
[2618]	4326
[2692]	4327	IF (ok_4xCO2atm) THEN
[2469]	4328	radsolp=solswp*swradcorr+sollwp
[2692]	4329	ENDIF
[2359]	4330
[2469]	4331	!
	4332	! Ajouter la tendance des rayonnements (tous les pas)
	4333	! avec une correction pour le cycle diurne dans le SW
	4334	!
[2359]	4335
[2469]	4336	DO k=1, klev
[3435]	4337	d_t_swr(:,k)=swradcorr(:)heat(:,k)phys_tstep/RDAY
	4338	d_t_sw0(:,k)=swradcorr(:)heat0(:,k)phys_tstep/RDAY
	4339	d_t_lwr(:,k)=-cool(:,k)*phys_tstep/RDAY
	4340	d_t_lw0(:,k)=-cool0(:,k)*phys_tstep/RDAY
[2469]	4341	ENDDO
[2194]	4342
[2812]	4343	CALL add_phys_tend(du0,dv0,d_t_swr,dq0,dql0,dqi0,paprs,'SW',abortphy,flag_inhib_tend,itap,0)
[3461]	4344	CALL prt_enerbil('SW',itap)
[2812]	4345	CALL add_phys_tend(du0,dv0,d_t_lwr,dq0,dql0,dqi0,paprs,'LW',abortphy,flag_inhib_tend,itap,0)
[3461]	4346	CALL prt_enerbil('LW',itap)
[1863]	4347
[2469]	4348	!
[2692]	4349	IF (mydebug) THEN
	4350	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	4351	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	4352	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	4353	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	4354	ENDIF
[1863]	4355
[2469]	4356	! Calculer l'hydrologie de la surface
	4357	!
	4358	! CALL hydrol(dtime,pctsrf,rain_fall, snow_fall, zxevap,
	4359	! . agesno, ftsol,fqsurf,fsnow, ruis)
	4360	!
[1001]	4361
[2469]	4362	!
	4363	! Calculer le bilan du sol et la derive de temperature (couplage)
	4364	!
	4365	DO i = 1, klon
	4366	! bils(i) = radsol(i) - sens(i) - evap(i)*RLVTT
	4367	! a la demande de JLD
	4368	bils(i) = radsol(i) - sens(i) + zxfluxlat(i)
	4369	ENDDO
	4370	!
	4371	!moddeblott(jan95)
	4372	! Appeler le programme de parametrisation de l'orographie
	4373	! a l'echelle sous-maille:
	4374	!
	4375	IF (prt_level .GE.10) THEN
	4376	print *,' call orography ? ', ok_orodr
	4377	ENDIF
	4378	!
	4379	IF (ok_orodr) THEN
	4380	!
	4381	! selection des points pour lesquels le shema est actif:
	4382	igwd=0
	4383	DO i=1,klon
	4384	itest(i)=0
	4385	! IF ((zstd(i).gt.10.0)) THEN
	4386	IF (((zpic(i)-zmea(i)).GT.100.).AND.(zstd(i).GT.10.0)) THEN
	4387	itest(i)=1
	4388	igwd=igwd+1
	4389	idx(igwd)=i
	4390	ENDIF
	4391	ENDDO
	4392	! igwdim=MAX(1,igwd)
	4393	!
	4394	IF (ok_strato) THEN
[1863]	4395
[3435]	4396	CALL drag_noro_strato(0,klon,klev,phys_tstep,paprs,pplay, &
[2469]	4397	zmea,zstd, zsig, zgam, zthe,zpic,zval, &
	4398	igwd,idx,itest, &
	4399	t_seri, u_seri, v_seri, &
	4400	zulow, zvlow, zustrdr, zvstrdr, &
	4401	d_t_oro, d_u_oro, d_v_oro)
[1863]	4402
[2469]	4403	ELSE
[3435]	4404	CALL drag_noro(klon,klev,phys_tstep,paprs,pplay, &
[2469]	4405	zmea,zstd, zsig, zgam, zthe,zpic,zval, &
	4406	igwd,idx,itest, &
	4407	t_seri, u_seri, v_seri, &
	4408	zulow, zvlow, zustrdr, zvstrdr, &
	4409	d_t_oro, d_u_oro, d_v_oro)
	4410	ENDIF
	4411	!
	4412	! ajout des tendances
	4413	!-----------------------------------------------------------------------
	4414	! ajout des tendances de la trainee de l'orographie
	4415	CALL add_phys_tend(d_u_oro,d_v_oro,d_t_oro,dq0,dql0,dqi0,paprs,'oro', &
[2812]	4416	abortphy,flag_inhib_tend,itap,0)
[3461]	4417	CALL prt_enerbil('oro',itap)
[2469]	4418	!----------------------------------------------------------------------
	4419	!
	4420	ENDIF ! fin de test sur ok_orodr
	4421	!
[2692]	4422	IF (mydebug) THEN
	4423	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	4424	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	4425	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	4426	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	4427	ENDIF
[1001]	4428
[2469]	4429	IF (ok_orolf) THEN
	4430	!
	4431	! selection des points pour lesquels le shema est actif:
	4432	igwd=0
	4433	DO i=1,klon
	4434	itest(i)=0
	4435	IF ((zpic(i)-zmea(i)).GT.100.) THEN
	4436	itest(i)=1
	4437	igwd=igwd+1
	4438	idx(igwd)=i
	4439	ENDIF
	4440	ENDDO
	4441	! igwdim=MAX(1,igwd)
	4442	!
	4443	IF (ok_strato) THEN
[1001]	4444
[3435]	4445	CALL lift_noro_strato(klon,klev,phys_tstep,paprs,pplay, &
[2469]	4446	latitude_deg,zmea,zstd,zpic,zgam,zthe,zpic,zval, &
	4447	igwd,idx,itest, &
	4448	t_seri, u_seri, v_seri, &
	4449	zulow, zvlow, zustrli, zvstrli, &
	4450	d_t_lif, d_u_lif, d_v_lif )
[2333]	4451
[2469]	4452	ELSE
[3435]	4453	CALL lift_noro(klon,klev,phys_tstep,paprs,pplay, &
[2469]	4454	latitude_deg,zmea,zstd,zpic, &
	4455	itest, &
	4456	t_seri, u_seri, v_seri, &
	4457	zulow, zvlow, zustrli, zvstrli, &
	4458	d_t_lif, d_u_lif, d_v_lif)
	4459	ENDIF
[1638]	4460
[2469]	4461	! ajout des tendances de la portance de l'orographie
	4462	CALL add_phys_tend(d_u_lif, d_v_lif, d_t_lif, dq0, dql0, dqi0, paprs, &
[2812]	4463	'lif', abortphy,flag_inhib_tend,itap,0)
[3461]	4464	CALL prt_enerbil('lif',itap)
[2469]	4465	ENDIF ! fin de test sur ok_orolf
[1638]	4466
[2469]	4467	IF (ok_hines) then
	4468	! HINES GWD PARAMETRIZATION
	4469	east_gwstress=0.
	4470	west_gwstress=0.
	4471	du_gwd_hines=0.
	4472	dv_gwd_hines=0.
[3435]	4473	CALL hines_gwd(klon, klev, phys_tstep, paprs, pplay, latitude_deg, t_seri, &
[2469]	4474	u_seri, v_seri, zustr_gwd_hines, zvstr_gwd_hines, d_t_hin, &
	4475	du_gwd_hines, dv_gwd_hines)
	4476	zustr_gwd_hines=0.
	4477	zvstr_gwd_hines=0.
	4478	DO k = 1, klev
[3435]	4479	zustr_gwd_hines(:)=zustr_gwd_hines(:)+ du_gwd_hines(:, k)/phys_tstep &
[2469]	4480	* (paprs(:, k)-paprs(:, k+1))/rg
[3435]	4481	zvstr_gwd_hines(:)=zvstr_gwd_hines(:)+ dv_gwd_hines(:, k)/phys_tstep &
[2469]	4482	* (paprs(:, k)-paprs(:, k+1))/rg
	4483	ENDDO
[1001]	4484
[2469]	4485	d_t_hin(:, :)=0.
	4486	CALL add_phys_tend(du_gwd_hines, dv_gwd_hines, d_t_hin, dq0, dql0, &
[2812]	4487	dqi0, paprs, 'hin', abortphy,flag_inhib_tend,itap,0)
[3461]	4488	CALL prt_enerbil('hin',itap)
[2469]	4489	ENDIF
[2333]	4490
[2469]	4491	IF (.not. ok_hines .and. ok_gwd_rando) then
[3435]	4492	! ym missing init for east_gwstress & west_gwstress -> added in phys_local_var_mod
	4493	CALL acama_GWD_rando(PHYS_TSTEP, pplay, latitude_deg, t_seri, u_seri, &
[2469]	4494	v_seri, rot, zustr_gwd_front, zvstr_gwd_front, du_gwd_front, &
	4495	dv_gwd_front, east_gwstress, west_gwstress)
	4496	zustr_gwd_front=0.
	4497	zvstr_gwd_front=0.
	4498	DO k = 1, klev
[3435]	4499	zustr_gwd_front(:)=zustr_gwd_front(:)+ du_gwd_front(:, k)/phys_tstep &
[2469]	4500	* (paprs(:, k)-paprs(:, k+1))/rg
[3435]	4501	zvstr_gwd_front(:)=zvstr_gwd_front(:)+ dv_gwd_front(:, k)/phys_tstep &
[2469]	4502	* (paprs(:, k)-paprs(:, k+1))/rg
	4503	ENDDO
[644]	4504
[2469]	4505	CALL add_phys_tend(du_gwd_front, dv_gwd_front, dt0, dq0, dql0, dqi0, &
[2812]	4506	paprs, 'front_gwd_rando', abortphy,flag_inhib_tend,itap,0)
[3461]	4507	CALL prt_enerbil('front_gwd_rando',itap)
[2469]	4508	ENDIF
[1938]	4509
[2692]	4510	IF (ok_gwd_rando) THEN
[3435]	4511	CALL FLOTT_GWD_rando(PHYS_TSTEP, pplay, t_seri, u_seri, v_seri, &
[2469]	4512	rain_fall + snow_fall, zustr_gwd_rando, zvstr_gwd_rando, &
	4513	du_gwd_rando, dv_gwd_rando, east_gwstress, west_gwstress)
	4514	CALL add_phys_tend(du_gwd_rando, dv_gwd_rando, dt0, dq0, dql0, dqi0, &
[2812]	4515	paprs, 'flott_gwd_rando', abortphy,flag_inhib_tend,itap,0)
[3461]	4516	CALL prt_enerbil('flott_gwd_rando',itap)
[2469]	4517	zustr_gwd_rando=0.
	4518	zvstr_gwd_rando=0.
	4519	DO k = 1, klev
[3435]	4520	zustr_gwd_rando(:)=zustr_gwd_rando(:)+ du_gwd_rando(:, k)/phys_tstep &
[2469]	4521	* (paprs(:, k)-paprs(:, k+1))/rg
[3435]	4522	zvstr_gwd_rando(:)=zvstr_gwd_rando(:)+ dv_gwd_rando(:, k)/phys_tstep &
[2469]	4523	* (paprs(:, k)-paprs(:, k+1))/rg
	4524	ENDDO
[2692]	4525	ENDIF
[766]	4526
[2469]	4527	! STRESS NECESSAIRES: TOUTE LA PHYSIQUE
[1279]	4528
[2692]	4529	IF (mydebug) THEN
	4530	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	4531	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	4532	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	4533	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	4534	ENDIF
[2136]	4535
[2469]	4536	DO i = 1, klon
	4537	zustrph(i)=0.
	4538	zvstrph(i)=0.
	4539	ENDDO
	4540	DO k = 1, klev
	4541	DO i = 1, klon
[3435]	4542	zustrph(i)=zustrph(i)+(u_seri(i,k)-u(i,k))/phys_tstep* &
[2469]	4543	(paprs(i,k)-paprs(i,k+1))/rg
[3435]	4544	zvstrph(i)=zvstrph(i)+(v_seri(i,k)-v(i,k))/phys_tstep* &
[2469]	4545	(paprs(i,k)-paprs(i,k+1))/rg
	4546	ENDDO
	4547	ENDDO
	4548	!
	4549	!IM calcul composantes axiales du moment angulaire et couple des montagnes
	4550	!
	4551	IF (is_sequential .and. ok_orodr) THEN
	4552	CALL aaam_bud (27,klon,klev,jD_cur-jD_ref,jH_cur, &
	4553	ra,rg,romega, &
	4554	latitude_deg,longitude_deg,pphis, &
	4555	zustrdr,zustrli,zustrph, &
	4556	zvstrdr,zvstrli,zvstrph, &
	4557	paprs,u,v, &
	4558	aam, torsfc)
	4559	ENDIF
	4560	!IM cf. FLott END
	4561	!DC Calcul de la tendance due au methane
[3461]	4562	IF (ok_qch4) THEN
[2469]	4563	CALL METHOX(1,klon,klon,klev,q_seri,d_q_ch4,pplay)
	4564	! ajout de la tendance d'humidite due au methane
[3435]	4565	d_q_ch4_dtime(:,:) = d_q_ch4(:,:)*phys_tstep
[2801]	4566	CALL add_phys_tend(du0, dv0, dt0, d_q_ch4_dtime, dql0, dqi0, paprs, &
[2812]	4567	'q_ch4', abortphy,flag_inhib_tend,itap,0)
[3435]	4568	d_q_ch4(:,:) = d_q_ch4_dtime(:,:)/phys_tstep
[2692]	4569	ENDIF
[2469]	4570	!
	4571	!
[2897]	4572
	4573	!===============================================================
	4574	! Additional tendency of TKE due to orography
	4575	!===============================================================
	4576	!
	4577	! Inititialization
	4578	!------------------
	4579
	4580	addtkeoro=0
	4581	CALL getin_p('addtkeoro',addtkeoro)
	4582
	4583	IF (prt_level.ge.5) &
	4584	print*,'addtkeoro', addtkeoro
	4585
	4586	alphatkeoro=1.
	4587	CALL getin_p('alphatkeoro',alphatkeoro)
	4588	alphatkeoro=min(max(0.,alphatkeoro),1.)
	4589
[3461]	4590	smallscales_tkeoro=.FALSE.
[2897]	4591	CALL getin_p('smallscales_tkeoro',smallscales_tkeoro)
	4592
	4593
[3461]	4594	dtadd(:,:)=0.
	4595	duadd(:,:)=0.
	4596	dvadd(:,:)=0.
[2897]	4597
	4598	! Choices for addtkeoro:
	4599	! ** 0 no TKE tendency from orography
	4600	! ** 1 we include a fraction alphatkeoro of the whole tendency duoro
	4601	! ** 2 we include a fraction alphatkeoro of the gravity wave part of duoro
	4602	!
	4603
	4604	IF (addtkeoro .GT. 0 .AND. ok_orodr ) THEN
	4605	! -------------------------------------------
	4606
	4607
	4608	! selection des points pour lesquels le schema est actif:
	4609
	4610
	4611	IF (addtkeoro .EQ. 1 ) THEN
	4612
	4613	duadd(:,:)=alphatkeoro*d_u_oro(:,:)
	4614	dvadd(:,:)=alphatkeoro*d_v_oro(:,:)
	4615
	4616	ELSE IF (addtkeoro .EQ. 2) THEN
	4617
[3461]	4618	IF (smallscales_tkeoro) THEN
[2897]	4619	igwd=0
	4620	DO i=1,klon
	4621	itest(i)=0
	4622	! Etienne: ici je prends en compte plus de relief que la routine drag_noro_strato
	4623	! car on peut s'attendre a ce que les petites echelles produisent aussi de la TKE
	4624	! Mais attention, cela ne va pas dans le sens de la conservation de l'energie!
	4625	IF (zstd(i).GT.1.0) THEN
	4626	itest(i)=1
	4627	igwd=igwd+1
	4628	idx(igwd)=i
	4629	ENDIF
	4630	ENDDO
	4631
	4632	ELSE
	4633
	4634	igwd=0
	4635	DO i=1,klon
	4636	itest(i)=0
	4637	IF (((zpic(i)-zmea(i)).GT.100.).AND.(zstd(i).GT.10.0)) THEN
	4638	itest(i)=1
	4639	igwd=igwd+1
	4640	idx(igwd)=i
[3461]	4641	ENDIF
[2897]	4642	ENDDO
	4643
[3461]	4644	ENDIF
[2897]	4645
[3461]	4646	CALL drag_noro_strato(addtkeoro,klon,klev,phys_tstep,paprs,pplay, &
[2897]	4647	zmea,zstd, zsig, zgam, zthe,zpic,zval, &
	4648	igwd,idx,itest, &
	4649	t_seri, u_seri, v_seri, &
	4650	zulow, zvlow, zustrdr, zvstrdr, &
	4651	d_t_oro_gw, d_u_oro_gw, d_v_oro_gw)
	4652
[3461]	4653	zustrdr(:)=0.
	4654	zvstrdr(:)=0.
	4655	zulow(:)=0.
	4656	zvlow(:)=0.
[2897]	4657
[3461]	4658	duadd(:,:)=alphatkeoro*d_u_oro_gw(:,:)
	4659	dvadd(:,:)=alphatkeoro*d_v_oro_gw(:,:)
	4660	ENDIF
[2897]	4661
	4662
	4663	! TKE update from subgrid temperature and wind tendencies
	4664	!----------------------------------------------------------
	4665	forall (k=1: nbp_lev) exner(:, k) = (pplay(:, k)/paprs(:,1))**RKAPPA
	4666
	4667
[3198]	4668	CALL tend_to_tke(pdtphys,paprs,exner,t_seri,u_seri,v_seri,dtadd,duadd,dvadd,pctsrf,pbl_tke)
[2897]	4669
	4670
	4671	ENDIF
	4672	! -----
	4673	!===============================================================
	4674
	4675
[2469]	4676	!====================================================================
	4677	! Interface Simulateur COSP (Calipso, ISCCP, MISR, ..)
	4678	!====================================================================
	4679	! Abderrahmane 24.08.09
	4680
	4681	IF (ok_cosp) THEN
	4682	! adeclarer
[1279]	4683	#ifdef CPP_COSP
[3435]	4684	IF (itap.eq.1.or.MOD(itap,NINT(freq_cosp/phys_tstep)).EQ.0) THEN
[1279]	4685
[2469]	4686	IF (prt_level .GE.10) THEN
	4687	print*,'freq_cosp',freq_cosp
	4688	ENDIF
	4689	mr_ozone=wo(:, :, 1) * dobson_u * 1e3 / zmasse
	4690	! print*,'Dans physiq.F avant appel cosp ref_liq,ref_ice=',
	4691	! s ref_liq,ref_ice
[3435]	4692	CALL phys_cosp(itap,phys_tstep,freq_cosp, &
[2469]	4693	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
[2794]	4694	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
[2469]	4695	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
	4696	JrNt,ref_liq,ref_ice, &
	4697	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
	4698	zu10m,zv10m,pphis, &
	4699	zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, &
	4700	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
	4701	prfl(:,1:klev),psfl(:,1:klev), &
	4702	pmflxr(:,1:klev),pmflxs(:,1:klev), &
	4703	mr_ozone,cldtau, cldemi)
[1412]	4704
[2469]	4705	! L calipso2D,calipso3D,cfadlidar,parasolrefl,atb,betamol,
	4706	! L cfaddbze,clcalipso2,dbze,cltlidarradar,
	4707	! M clMISR,
	4708	! R clisccp2,boxtauisccp,boxptopisccp,tclisccp,ctpisccp,
	4709	! I tauisccp,albisccp,meantbisccp,meantbclrisccp)
[1279]	4710
[2469]	4711	ENDIF
[3370]	4712	#endif
[1279]	4713
[3370]	4714	#ifdef CPP_COSP2
[3435]	4715	IF (itap.eq.1.or.MOD(itap,NINT(freq_cosp/phys_tstep)).EQ.0) THEN
[3370]	4716
	4717	IF (prt_level .GE.10) THEN
	4718	print*,'freq_cosp',freq_cosp
	4719	ENDIF
	4720	mr_ozone=wo(:, :, 1) * dobson_u * 1e3 / zmasse
	4721	print*,'Dans physiq.F avant appel '
	4722	! s ref_liq,ref_ice
[3435]	4723	CALL phys_cosp2(itap,phys_tstep,freq_cosp, &
[3370]	4724	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
	4725	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
	4726	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
	4727	JrNt,ref_liq,ref_ice, &
	4728	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
	4729	zu10m,zv10m,pphis, &
	4730	zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, &
	4731	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
	4732	prfl(:,1:klev),psfl(:,1:klev), &
	4733	pmflxr(:,1:klev),pmflxs(:,1:klev), &
	4734	mr_ozone,cldtau, cldemi)
	4735	ENDIF
[1279]	4736	#endif
[3370]	4737
[3491]	4738	#ifdef CPP_COSPV2
	4739	IF (itap.eq.1.or.MOD(itap,NINT(freq_cosp/phys_tstep)).EQ.0) THEN
[3726]	4740	! IF (MOD(itap,NINT(freq_cosp/phys_tstep)).EQ.0) THEN
[3491]	4741
	4742	IF (prt_level .GE.10) THEN
	4743	print*,'freq_cosp',freq_cosp
	4744	ENDIF
[3726]	4745	DO k = 1, klev
	4746	DO i = 1, klon
	4747	phicosp(i,k) = pphi(i,k) + pphis(i)
	4748	ENDDO
	4749	ENDDO
[3491]	4750	mr_ozone=wo(:, :, 1) * dobson_u * 1e3 / zmasse
	4751	print*,'Dans physiq.F avant appel '
	4752	! s ref_liq,ref_ice
	4753	CALL lmdz_cosp_interface(itap,phys_tstep,freq_cosp, &
	4754	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
	4755	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
	4756	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
	4757	JrNt,ref_liq,ref_ice, &
	4758	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
	4759	zu10m,zv10m,pphis, &
	4760	zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, &
	4761	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
	4762	prfl(:,1:klev),psfl(:,1:klev), &
	4763	pmflxr(:,1:klev),pmflxs(:,1:klev), &
	4764	mr_ozone,cldtau, cldemi)
	4765	ENDIF
	4766	#endif
	4767
[2469]	4768	ENDIF !ok_cosp
[2580]	4769
	4770
	4771	! Marine
	4772
	4773	IF (ok_airs) then
	4774
[3435]	4775	IF (itap.eq.1.or.MOD(itap,NINT(freq_airs/phys_tstep)).EQ.0) THEN
[2692]	4776	write(,) 'je vais appeler simu_airs, ok_airs, freq_airs=', ok_airs, freq_airs
	4777	CALL simu_airs(itap,rneb, t_seri, cldemi, fiwc, ref_ice, pphi, pplay, paprs,&
	4778	& map_prop_hc,map_prop_hist,&
	4779	& map_emis_hc,map_iwp_hc,map_deltaz_hc,map_pcld_hc,map_tcld_hc,&
	4780	& map_emis_Cb,map_pcld_Cb,map_tcld_Cb,&
	4781	& map_emis_ThCi,map_pcld_ThCi,map_tcld_ThCi,&
	4782	& map_emis_Anv,map_pcld_Anv,map_tcld_Anv,&
	4783	& map_emis_hist,map_iwp_hist,map_deltaz_hist,map_rad_hist,&
	4784	& map_ntot,map_hc,map_hist,&
	4785	& map_Cb,map_ThCi,map_Anv,&
	4786	& alt_tropo )
[2580]	4787	ENDIF
	4788
	4789	ENDIF ! ok_airs
	4790
	4791
[2469]	4792	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	4793	!AA
	4794	!AA Installation de l'interface online-offline pour traceurs
	4795	!AA
	4796	!====================================================================
	4797	! Calcul des tendances traceurs
	4798	!====================================================================
	4799	!
[959]	4800
[2469]	4801	IF (type_trac=='repr') THEN
[3666]	4802	!MM pas d'impact, car on recupere q_seri,tr_seri,t_seri via phys_local_var_mod
	4803	!MM dans Reprobus
[2469]	4804	sh_in(:,:) = q_seri(:,:)
[3666]	4805	#ifdef REPROBUS
	4806	d_q_rep(:,:) = 0.
	4807	d_ql_rep(:,:) = 0.
	4808	d_qi_rep(:,:) = 0.
	4809	#endif
[2469]	4810	ELSE
	4811	sh_in(:,:) = qx(:,:,ivap)
[2784]	4812	ch_in(:,:) = qx(:,:,iliq)
[2692]	4813	ENDIF
[1565]	4814
[2630]	4815	#ifdef CPP_Dust
[3776]	4816	! Avec SPLA, iflag_phytrac est forcé =1
	4817	CALL phytracr_spl ( debut,lafin , jD_cur,jH_cur,iflag_con, & ! I
[2630]	4818	pdtphys,ftsol, & ! I
	4819	t,q_seri,paprs,pplay,RHcl, & ! I
	4820	pmfu, pmfd, pen_u, pde_u, pen_d, pde_d, & ! I
	4821	coefh(1:klon,1:klev,is_ave), cdragh, cdragm, u1, v1, & ! I
	4822	u_seri, v_seri, latitude_deg, longitude_deg, &
	4823	pphis,pctsrf,pmflxr,pmflxs,prfl,psfl, & ! I
	4824	da,phi,phi2,d1a,dam,mp,ep,sigd,sij,clw,elij, & ! I
	4825	epmlmMm,eplaMm,upwd,dnwd,itop_con,ibas_con, & ! I
	4826	ev,wdtrainA, wdtrainM,wght_cvfd, & ! I
	4827	fm_therm, entr_therm, rneb, & ! I
	4828	beta_prec_fisrt,beta_prec, & !I
	4829	zu10m,zv10m,wstar,ale_bl,ale_wake, & ! I
	4830	d_tr_dyn,tr_seri)
	4831
	4832	#else
[3776]	4833	IF (iflag_phytrac == 1 ) THEN
	4834	CALL phytrac ( &
[2469]	4835	itap, days_elapsed+1, jH_cur, debut, &
[3435]	4836	lafin, phys_tstep, u, v, t, &
[2469]	4837	paprs, pplay, pmfu, pmfd, &
	4838	pen_u, pde_u, pen_d, pde_d, &
	4839	cdragh, coefh(1:klon,1:klev,is_ave), fm_therm, entr_therm, &
	4840	u1, v1, ftsol, pctsrf, &
	4841	zustar, zu10m, zv10m, &
	4842	wstar(:,is_ave), ale_bl, ale_wake, &
	4843	latitude_deg, longitude_deg, &
	4844	frac_impa,frac_nucl, beta_prec_fisrt,beta_prec, &
	4845	presnivs, pphis, pphi, albsol1, &
[2784]	4846	sh_in, ch_in, rhcl, cldfra, rneb, &
[2469]	4847	diafra, cldliq, itop_con, ibas_con, &
	4848	pmflxr, pmflxs, prfl, psfl, &
	4849	da, phi, mp, upwd, &
	4850	phi2, d1a, dam, sij, wght_cvfd, & !<<RomP+RL
	4851	wdtrainA, wdtrainM, sigd, clw,elij, & !<<RomP
	4852	ev, ep, epmlmMm, eplaMm, & !<<RomP
	4853	dnwd, aerosol_couple, flxmass_w, &
	4854	tau_aero, piz_aero, cg_aero, ccm, &
	4855	rfname, &
	4856	d_tr_dyn, & !<<RomP
[3418]	4857	tr_seri, init_source)
[3666]	4858	#ifdef REPROBUS
	4859
	4860
	4861	print*,'avt add phys rep',abortphy
	4862
	4863	CALL add_phys_tend &
	4864	(du0,dv0,dt0,d_q_rep,d_ql_rep,d_qi_rep,paprs,&
	4865	'rep',abortphy,flag_inhib_tend,itap,0)
	4866	IF (abortphy==1) Print*,'ERROR ABORT REP'
	4867
	4868	print*,'apr add phys rep',abortphy
	4869
[2630]	4870	#endif
[3776]	4871	ENDIF ! (iflag_phytrac=1)
[3666]	4872
	4873	#endif
[3776]	4874	!ENDIF ! (iflag_phytrac=1)
[524]	4875
[2469]	4876	IF (offline) THEN
[524]	4877
[2469]	4878	IF (prt_level.ge.9) &
	4879	print*,'Attention on met a 0 les thermiques pour phystoke'
[2692]	4880	CALL phystokenc ( &
[2469]	4881	nlon,klev,pdtphys,longitude_deg,latitude_deg, &
	4882	t,pmfu, pmfd, pen_u, pde_u, pen_d, pde_d, &
	4883	fm_therm,entr_therm, &
	4884	cdragh,coefh(1:klon,1:klev,is_ave),u1,v1,ftsol,pctsrf, &
	4885	frac_impa, frac_nucl, &
[3435]	4886	pphis,cell_area,phys_tstep,itap, &
[2469]	4887	qx(:,:,ivap),da,phi,mp,upwd,dnwd)
[524]	4888
	4889
[2469]	4890	ENDIF
[524]	4891
[2469]	4892	!
	4893	! Calculer le transport de l'eau et de l'energie (diagnostique)
	4894	!
	4895	CALL transp (paprs,zxtsol, &
[3257]	4896	t_seri, q_seri, ql_seri, qs_seri, u_seri, v_seri, zphi, &
	4897	ve, vq, ue, uq, vwat, uwat)
[2469]	4898	!
	4899	!IM global posePB BEG
	4900	IF(1.EQ.0) THEN
	4901	!
	4902	CALL transp_lay (paprs,zxtsol, &
	4903	t_seri, q_seri, u_seri, v_seri, zphi, &
	4904	ve_lay, vq_lay, ue_lay, uq_lay)
	4905	!
	4906	ENDIF !(1.EQ.0) THEN
	4907	!IM global posePB END
	4908	! Accumuler les variables a stocker dans les fichiers histoire:
	4909	!
[1279]	4910
[2469]	4911	!================================================================
	4912	! Conversion of kinetic and potential energy into heat, for
	4913	! parameterisation of subgrid-scale motions
	4914	!================================================================
[1753]	4915
[2469]	4916	d_t_ec(:,:)=0.
	4917	forall (k=1: nbp_lev) exner(:, k) = (pplay(:, k)/paprs(:,1))**RKAPPA
[2851]	4918	CALL ener_conserv(klon,klev,pdtphys,u,v,t,qx(:,:,ivap),qx(:,:,iliq),qx(:,:,isol), &
	4919	u_seri,v_seri,t_seri,q_seri,ql_seri,qs_seri,pbl_tke(:,:,is_ave)-tke0(:,:), &
[2469]	4920	zmasse,exner,d_t_ec)
	4921	t_seri(:,:)=t_seri(:,:)+d_t_ec(:,:)
[1753]	4922
[2469]	4923	!=======================================================================
	4924	! SORTIES
	4925	!=======================================================================
	4926	!
	4927	!IM initialisation + calculs divers diag AMIP2
	4928	!
	4929	include "calcul_divers.h"
	4930	!
	4931	!IM Interpolation sur les niveaux de pression du NMC
	4932	! -------------------------------------------------
	4933	!
	4934	include "calcul_STDlev.h"
	4935	!
	4936	! slp sea level pressure derived from Arpege-IFS : CALL ctstar + CALL pppmer
	4937	CALL diag_slp(klon,t_seri,paprs,pplay,pphis,ptstar,pt0,slp)
	4938	!
[2496]	4939	!cc prw = eau precipitable
	4940	! prlw = colonne eau liquide
	4941	! prlw = colonne eau solide
[2499]	4942	prw(:) = 0.
	4943	prlw(:) = 0.
	4944	prsw(:) = 0.
	4945	DO k = 1, klev
	4946	prw(:) = prw(:) + q_seri(:,k)*zmasse(:,k)
	4947	prlw(:) = prlw(:) + ql_seri(:,k)*zmasse(:,k)
	4948	prsw(:) = prsw(:) + qs_seri(:,k)*zmasse(:,k)
[2469]	4949	ENDDO
	4950	!
	4951	IF (type_trac == 'inca') THEN
[655]	4952	#ifdef INCA
[2469]	4953	CALL VTe(VTphysiq)
	4954	CALL VTb(VTinca)
[959]	4955
[2469]	4956	CALL chemhook_end ( &
[3435]	4957	phys_tstep, &
[2469]	4958	pplay, &
	4959	t_seri, &
	4960	tr_seri, &
	4961	nbtr, &
	4962	paprs, &
	4963	q_seri, &
	4964	cell_area, &
	4965	pphi, &
	4966	pphis, &
[2832]	4967	zx_rh, &
[3632]	4968	aps, bps, ap, bp)
[959]	4969
[2469]	4970	CALL VTe(VTinca)
	4971	CALL VTb(VTphysiq)
[655]	4972	#endif
[2692]	4973	ENDIF
[655]	4974
[1753]	4975
[2469]	4976	!
	4977	! Convertir les incrementations en tendances
	4978	!
	4979	IF (prt_level .GE.10) THEN
	4980	print *,'Convertir les incrementations en tendances '
	4981	ENDIF
	4982	!
[2692]	4983	IF (mydebug) THEN
	4984	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	4985	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	4986	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	4987	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	4988	ENDIF
[766]	4989
[2469]	4990	DO k = 1, klev
	4991	DO i = 1, klon
[3435]	4992	d_u(i,k) = ( u_seri(i,k) - u(i,k) ) / phys_tstep
	4993	d_v(i,k) = ( v_seri(i,k) - v(i,k) ) / phys_tstep
	4994	d_t(i,k) = ( t_seri(i,k)-t(i,k) ) / phys_tstep
	4995	d_qx(i,k,ivap) = ( q_seri(i,k) - qx(i,k,ivap) ) / phys_tstep
	4996	d_qx(i,k,iliq) = ( ql_seri(i,k) - qx(i,k,iliq) ) / phys_tstep
[2469]	4997	!CR: on ajoute le contenu en glace
[2692]	4998	IF (nqo.eq.3) THEN
[3435]	4999	d_qx(i,k,isol) = ( qs_seri(i,k) - qx(i,k,isol) ) / phys_tstep
[2692]	5000	ENDIF
[2469]	5001	ENDDO
	5002	ENDDO
	5003	!
	5004	!CR: nb de traceurs eau: nqo
	5005	! IF (nqtot.GE.3) THEN
	5006	IF (nqtot.GE.(nqo+1)) THEN
	5007	! DO iq = 3, nqtot
	5008	DO iq = nqo+1, nqtot
	5009	DO k = 1, klev
	5010	DO i = 1, klon
[3435]	5011	! d_qx(i,k,iq) = ( tr_seri(i,k,iq-2) - qx(i,k,iq) ) / phys_tstep
	5012	d_qx(i,k,iq) = ( tr_seri(i,k,iq-nqo) - qx(i,k,iq) ) / phys_tstep
[2469]	5013	ENDDO
	5014	ENDDO
	5015	ENDDO
	5016	ENDIF
	5017	!
	5018	!IM rajout diagnostiques bilan KP pour analyse MJO par Jun-Ichi Yano
	5019	!IM global posePB include "write_bilKP_ins.h"
	5020	!IM global posePB include "write_bilKP_ave.h"
	5021	!
[1412]	5022
[2489]	5023	!--OB mass fixer
	5024	!--profile is corrected to force mass conservation of water
	5025	IF (mass_fixer) THEN
	5026	qql2(:)=0.0
[2499]	5027	DO k = 1, klev
	5028	qql2(:)=qql2(:)+(q_seri(:,k)+ql_seri(:,k)+qs_seri(:,k))*zmasse(:,k)
[2489]	5029	ENDDO
	5030	DO i = 1, klon
	5031	!--compute ratio of what q+ql should be with conservation to what it is
	5032	corrqql=(qql1(i)+(evap(i)-rain_fall(i)-snow_fall(i))*pdtphys)/qql2(i)
	5033	DO k = 1, klev
	5034	q_seri(i,k) =q_seri(i,k)*corrqql
	5035	ql_seri(i,k)=ql_seri(i,k)*corrqql
	5036	ENDDO
	5037	ENDDO
	5038	ENDIF
	5039	!--fin mass fixer
	5040
[2469]	5041	! Sauvegarder les valeurs de t et q a la fin de la physique:
	5042	!
[2499]	5043	u_ancien(:,:) = u_seri(:,:)
	5044	v_ancien(:,:) = v_seri(:,:)
	5045	t_ancien(:,:) = t_seri(:,:)
	5046	q_ancien(:,:) = q_seri(:,:)
	5047	ql_ancien(:,:) = ql_seri(:,:)
	5048	qs_ancien(:,:) = qs_seri(:,:)
	5049	CALL water_int(klon,klev,q_ancien,zmasse,prw_ancien)
	5050	CALL water_int(klon,klev,ql_ancien,zmasse,prlw_ancien)
	5051	CALL water_int(klon,klev,qs_ancien,zmasse,prsw_ancien)
[2469]	5052	! !! RomP >>>
	5053	!CR: nb de traceurs eau: nqo
[2499]	5054	IF (nqtot.GT.nqo) THEN
[2469]	5055	DO iq = nqo+1, nqtot
[2499]	5056	tr_ancien(:,:,iq-nqo) = tr_seri(:,:,iq-nqo)
[2469]	5057	ENDDO
	5058	ENDIF
	5059	! !! RomP <<<
	5060	!==========================================================================
	5061	! Sorties des tendances pour un point particulier
	5062	! a utiliser en 1D, avec igout=1 ou en 3D sur un point particulier
	5063	! pour le debug
	5064	! La valeur de igout est attribuee plus haut dans le programme
	5065	!==========================================================================
[879]	5066
[2692]	5067	IF (prt_level.ge.1) THEN
[2469]	5068	write(lunout,*) 'FIN DE PHYSIQ !!!!!!!!!!!!!!!!!!!!'
	5069	write(lunout,*) &
	5070	'nlon,klev,nqtot,debut,lafin,jD_cur, jH_cur, pdtphys pct tlos'
	5071	write(lunout,*) &
	5072	nlon,klev,nqtot,debut,lafin, jD_cur, jH_cur ,pdtphys, &
	5073	pctsrf(igout,is_ter), pctsrf(igout,is_lic),pctsrf(igout,is_oce), &
	5074	pctsrf(igout,is_sic)
	5075	write(lunout,*) 'd_t_dyn,d_t_con,d_t_lsc,d_t_ajsb,d_t_ajs,d_t_eva'
[2692]	5076	DO k=1,klev
[2469]	5077	write(lunout,*) d_t_dyn(igout,k),d_t_con(igout,k), &
	5078	d_t_lsc(igout,k),d_t_ajsb(igout,k),d_t_ajs(igout,k), &
	5079	d_t_eva(igout,k)
[2692]	5080	ENDDO
[2469]	5081	write(lunout,*) 'cool,heat'
[2692]	5082	DO k=1,klev
[2469]	5083	write(lunout,*) cool(igout,k),heat(igout,k)
[2692]	5084	ENDDO
[879]	5085
[2469]	5086	!jyg< (En attendant de statuer sur le sort de d_t_oli)
	5087	!jyg! write(lunout,*) 'd_t_oli,d_t_vdf,d_t_oro,d_t_lif,d_t_ec'
	5088	!jyg! do k=1,klev
	5089	!jyg! write(lunout,*) d_t_oli(igout,k),d_t_vdf(igout,k), &
	5090	!jyg! d_t_oro(igout,k),d_t_lif(igout,k),d_t_ec(igout,k)
	5091	!jyg! enddo
	5092	write(lunout,*) 'd_t_vdf,d_t_oro,d_t_lif,d_t_ec'
[2692]	5093	DO k=1,klev
[2469]	5094	write(lunout,*) d_t_vdf(igout,k), &
	5095	d_t_oro(igout,k),d_t_lif(igout,k),d_t_ec(igout,k)
[2692]	5096	ENDDO
[2469]	5097	!>jyg
[879]	5098
[2469]	5099	write(lunout,*) 'd_ps ',d_ps(igout)
	5100	write(lunout,*) 'd_u, d_v, d_t, d_qx1, d_qx2 '
[2692]	5101	DO k=1,klev
[2469]	5102	write(lunout,*) d_u(igout,k),d_v(igout,k),d_t(igout,k), &
	5103	d_qx(igout,k,1),d_qx(igout,k,2)
[2692]	5104	ENDDO
	5105	ENDIF
[879]	5106
[2469]	5107	!============================================================
	5108	! Calcul de la temperature potentielle
	5109	!============================================================
	5110	DO k = 1, klev
	5111	DO i = 1, klon
	5112	!JYG/IM theta en debut du pas de temps
	5113	!JYG/IM theta(i,k)=t(i,k)(100000./pplay(i,k))*(RD/RCPD)
	5114	!JYG/IM theta en fin de pas de temps de physique
	5115	theta(i,k)=t_seri(i,k)(100000./pplay(i,k))*(RD/RCPD)
	5116	! thetal: 2 lignes suivantes a decommenter si vous avez les fichiers
	5117	! MPL 20130625
	5118	! fth_fonctions.F90 et parkind1.F90
	5119	! sinon thetal=theta
	5120	! thetal(i,k)=fth_thetal(pplay(i,k),t_seri(i,k),q_seri(i,k),
	5121	! : ql_seri(i,k))
	5122	thetal(i,k)=theta(i,k)
	5123	ENDDO
	5124	ENDDO
	5125	!
[879]	5126
[2469]	5127	! 22.03.04 BEG
	5128	!=============================================================
	5129	! Ecriture des sorties
	5130	!=============================================================
[524]	5131	#ifdef CPP_IOIPSL
	5132
[2469]	5133	! Recupere des varibles calcule dans differents modules
	5134	! pour ecriture dans histxxx.nc
[782]	5135
[2469]	5136	! Get some variables from module fonte_neige_mod
	5137	CALL fonte_neige_get_vars(pctsrf, &
[2517]	5138	zxfqcalving, zxfqfonte, zxffonte, zxrunofflic)
[782]	5139
[1507]	5140
[2469]	5141	!=============================================================
	5142	! Separation entre thermiques et non thermiques dans les sorties
	5143	! de fisrtilp
	5144	!=============================================================
[1507]	5145
[2692]	5146	IF (iflag_thermals>=1) THEN
[2469]	5147	d_t_lscth=0.
	5148	d_t_lscst=0.
	5149	d_q_lscth=0.
	5150	d_q_lscst=0.
[2692]	5151	DO k=1,klev
	5152	DO i=1,klon
	5153	IF (ptconvth(i,k)) THEN
[2469]	5154	d_t_lscth(i,k)=d_t_eva(i,k)+d_t_lsc(i,k)
	5155	d_q_lscth(i,k)=d_q_eva(i,k)+d_q_lsc(i,k)
[2692]	5156	ELSE
[2469]	5157	d_t_lscst(i,k)=d_t_eva(i,k)+d_t_lsc(i,k)
	5158	d_q_lscst(i,k)=d_q_eva(i,k)+d_q_lsc(i,k)
[2692]	5159	ENDIF
	5160	ENDDO
	5161	ENDDO
[1507]	5162
[2692]	5163	DO i=1,klon
[2469]	5164	plul_st(i)=prfl(i,lmax_th(i)+1)+psfl(i,lmax_th(i)+1)
	5165	plul_th(i)=prfl(i,1)+psfl(i,1)
[2692]	5166	ENDDO
	5167	ENDIF
[909]	5168
[2469]	5169	!On effectue les sorties:
[1791]	5170
[2630]	5171	#ifdef CPP_Dust
	5172	CALL phys_output_write_spl(itap, pdtphys, paprs, pphis, &
	5173	pplay, lmax_th, aerosol_couple, &
[3776]	5174	ok_ade, ok_aie, ivap, ok_sync, &
[2630]	5175	ptconv, read_climoz, clevSTD, &
	5176	ptconvth, d_t, qx, d_qx, d_tr_dyn, zmasse, &
	5177	flag_aerosol, flag_aerosol_strat, ok_cdnc)
	5178	#else
[2469]	5179	CALL phys_output_write(itap, pdtphys, paprs, pphis, &
	5180	pplay, lmax_th, aerosol_couple, &
[3630]	5181	ok_ade, ok_aie, ok_volcan, ivap, iliq, isol, &
[2496]	5182	ok_sync, ptconv, read_climoz, clevSTD, &
[2665]	5183	ptconvth, d_u, d_t, qx, d_qx, zmasse, &
[2469]	5184	flag_aerosol, flag_aerosol_strat, ok_cdnc)
[2630]	5185	#endif
[1791]	5186
[2651]	5187	#ifndef CPP_XIOS
[2590]	5188	CALL write_paramLMDZ_phy(itap,nid_ctesGCM,ok_sync)
[2651]	5189	#endif
[687]	5190
[524]	5191	#endif
	5192
[3776]	5193	! Pour XIOS : On remet des variables a .false. apres un premier appel
[3461]	5194	IF (debut) THEN
[3239]	5195	#ifdef CPP_XIOS
	5196	swaero_diag=.FALSE.
	5197	swaerofree_diag=.FALSE.
	5198	dryaod_diag=.FALSE.
	5199	ok_4xCO2atm= .FALSE.
[3258]	5200	! write (lunout,*)'ok_4xCO2atm= ',swaero_diag, swaerofree_diag, dryaod_diag, ok_4xCO2atm
[2235]	5201
[3461]	5202	IF (is_master) THEN
[3258]	5203	!--setting up swaero_diag to TRUE in XIOS case
	5204	IF (xios_field_is_active("topswad").OR.xios_field_is_active("topswad0").OR. &
[3239]	5205	xios_field_is_active("solswad").OR.xios_field_is_active("solswad0").OR. &
	5206	xios_field_is_active("topswai").OR.xios_field_is_active("solswai").OR. &
	5207	(iflag_rrtm==1.AND.(xios_field_is_active("toplwad").OR.xios_field_is_active("toplwad0").OR. &
	5208	xios_field_is_active("sollwad").OR.xios_field_is_active("sollwad0")))) &
	5209	!!!--for now these fields are not in the XML files so they are omitted
	5210	!!! xios_field_is_active("toplwai").OR.xios_field_is_active("sollwai") !))) &
	5211	swaero_diag=.TRUE.
	5212
[3258]	5213	!--setting up swaerofree_diag to TRUE in XIOS case
	5214	IF (xios_field_is_active("SWdnSFCcleanclr").OR.xios_field_is_active("SWupSFCcleanclr").OR. &
[3239]	5215	xios_field_is_active("SWupTOAcleanclr").OR.xios_field_is_active("rsucsaf").OR. &
	5216	xios_field_is_active("rsdcsaf") .OR. xios_field_is_active("LWdnSFCcleanclr").OR. &
	5217	xios_field_is_active("LWupTOAcleanclr")) &
	5218	swaerofree_diag=.TRUE.
	5219
[3258]	5220	!--setting up dryaod_diag to TRUE in XIOS case
	5221	DO naero = 1, naero_tot-1
[3239]	5222	IF (xios_field_is_active("dryod550_"//name_aero_tau(naero))) dryaod_diag=.TRUE.
[3258]	5223	ENDDO
	5224	!
	5225	!--setting up ok_4xCO2atm to TRUE in XIOS case
	5226	IF (xios_field_is_active("rsut4co2").OR.xios_field_is_active("rlut4co2").OR. &
[3239]	5227	xios_field_is_active("rsutcs4co2").OR.xios_field_is_active("rlutcs4co2").OR. &
	5228	xios_field_is_active("rsu4co2").OR.xios_field_is_active("rsucs4co2").OR. &
	5229	xios_field_is_active("rsd4co2").OR.xios_field_is_active("rsdcs4co2").OR. &
	5230	xios_field_is_active("rlu4co2").OR.xios_field_is_active("rlucs4co2").OR. &
	5231	xios_field_is_active("rld4co2").OR.xios_field_is_active("rldcs4co2")) &
	5232	ok_4xCO2atm=.TRUE.
[3461]	5233	ENDIF
[3258]	5234	!$OMP BARRIER
[3461]	5235	CALL bcast(swaero_diag)
	5236	CALL bcast(swaerofree_diag)
	5237	CALL bcast(dryaod_diag)
	5238	CALL bcast(ok_4xCO2atm)
[3258]	5239	! write (lunout,*)'ok_4xCO2atm= ',swaero_diag, swaerofree_diag, dryaod_diag, ok_4xCO2atm
[3239]	5240	#endif
[3461]	5241	ENDIF
[3239]	5242
[2469]	5243	!====================================================================
	5244	! Arret du modele apres hgardfou en cas de detection d'un
	5245	! plantage par hgardfou
	5246	!====================================================================
[2235]	5247
	5248	IF (abortphy==1) THEN
	5249	abort_message ='Plantage hgardfou'
[2311]	5250	CALL abort_physic (modname,abort_message,1)
[2235]	5251	ENDIF
	5252
[2469]	5253	! 22.03.04 END
	5254	!
	5255	!====================================================================
	5256	! Si c'est la fin, il faut conserver l'etat de redemarrage
	5257	!====================================================================
	5258	!
[782]	5259
[2469]	5260	IF (lafin) THEN
	5261	itau_phy = itau_phy + itap
	5262	CALL phyredem ("restartphy.nc")
	5263	! open(97,form="unformatted",file="finbin")
	5264	! write(97) u_seri,v_seri,t_seri,q_seri
	5265	! close(97)
[3435]	5266
	5267	IF (is_omp_master) THEN
	5268
	5269	IF (read_climoz >= 1) THEN
	5270	IF (is_mpi_root) CALL nf95_close(ncid_climoz)
	5271	DEALLOCATE(press_edg_climoz) ! pointer
	5272	DEALLOCATE(press_cen_climoz) ! pointer
	5273	ENDIF
	5274
[2692]	5275	ENDIF
[3435]	5276	#ifdef CPP_XIOS
	5277	IF (is_omp_master) CALL xios_context_finalize
	5278	#endif
[3461]	5279	WRITE(lunout,*) ' physiq fin, nombre de steps ou cvpas = 1 : ', Ncvpaseq1
[2469]	5280	ENDIF
[1863]	5281
[2469]	5282	! first=.false.
[1863]	5283
[2469]	5284	END SUBROUTINE physiq
[2418]	5285
[2902]	5286	END MODULE physiq_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format