Context Navigation

phys_output_mod.F90 @ 4143

Last change on this file since 4143 was 4143, checked in by dcugnet, 2 years ago
Some variables are renamed or replaced by direct equivalents: iso_indnum -> tracers(:)%iso_iName niso_possibles -> niso iqiso -> iqIsoPha ; index_trac -> itZonIso ok_iso_verif -> isoCheck ntraceurs_zone -> nzone ; ntraciso -> ntiso qperemin -> min_qparent ; masseqmin -> min_qmass ; ratiomin -> min_ratio Some renamed variables are only aliased with the older name (using USE <module>, ONLY: <oldName> => <newName>) in routines where they are repeated many times. Few hard-coded indexes are now computed (examples: ilic, iso, ivap, irneb, iq_vap, iq_liq, iso_H2O, iso_HDO, iso_HTO, iso_O17, iso_O18). The IF(isoCheck) test is now embedded in the check_isotopes_seq and check_isotopes_loc routines (lighter calling).
Property copyright set to Name of program: LMDZ Creation date: 1984 Version: LMDZ5 License: CeCILL version 2 Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539 See the license file in the root directory Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 24.0 KB

Line
1	! $Id: phys_output_mod.F90 4143 2022-05-09 10:35:40Z dcugnet $
2	!
3
4	MODULE phys_output_mod
5	USE indice_sol_mod
6	USE phys_output_var_mod
7	USE phys_output_write_mod, ONLY : phys_output_write
8	REAL, DIMENSION(nfiles),SAVE :: ecrit_files
9
10	! Abderrahmane 12 2007
11	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
12	!!! Ecreture des Sorties du modele dans les fichiers Netcdf :
13	! histmth.nc : moyennes mensuelles
14	! histday.nc : moyennes journalieres
15	! histhf.nc : moyennes toutes les 3 heures
16	! histins.nc : valeurs instantanees
17	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
18
19	CONTAINS
20
21	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
22	!!!!!!!!! Ouverture des fichier et definition des variable de sortie !!!!!!!!
23	!! histbeg, histvert et histdef
24	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
25
26	SUBROUTINE phys_output_open(rlon,rlat,pim,tabij,ipt,jpt,plon,plat, &
27	jjmp1,nlevSTD,clevSTD,rlevSTD, dtime, ok_veget, &
28	type_ocean, iflag_pbl,iflag_pbl_split,ok_mensuel,ok_journe, &
29	ok_hf,ok_instan,ok_LES,ok_ade,ok_aie, read_climoz, &
30	phys_out_filestations, &
31	aerosol_couple, flag_aerosol_strat, &
32	pdtphys, paprs, pphis, pplay, lmax_th, ptconv, ptconvth, ivap, &
33	d_u, d_t, qx, d_qx, zmasse, ok_sync)
34
35	USE iophy
36	USE dimphy
37	USE infotrac_phy, ONLY: nqtot, tracers, type_trac, niso
38	USE strings_mod, ONLY: maxlen
39	USE ioipsl
40	USE phys_cal_mod, only : hour, calend
41	USE mod_phys_lmdz_para
42	!Martin
43	USE surface_data, ONLY : landice_opt
44	USE phys_output_ctrlout_mod
45	USE mod_grid_phy_lmdz, only: klon_glo,nbp_lon,nbp_lat
46	USE print_control_mod, ONLY: prt_level,lunout
47	USE vertical_layers_mod, ONLY: ap,bp,preff,presnivs, aps, bps, pseudoalt
48	USE time_phylmdz_mod, ONLY: day_ini, itau_phy, start_time, annee_ref, day_ref
49	#ifdef CPP_XIOS
50	! ug Pour les sorties XIOS
51	USE wxios
52	#endif
53
54	IMPLICIT NONE
55	include "clesphys.h"
56	include "YOMCST.h"
57
58	! ug Nouveaux arguments n\'ecessaires au histwrite_mod:
59	INTEGER, INTENT(IN) :: ivap
60	INTEGER, DIMENSION(klon), INTENT(IN) :: lmax_th
61	LOGICAL, INTENT(IN) :: ok_sync
62	LOGICAL, DIMENSION(klon, klev), INTENT(IN) :: ptconv, ptconvth
63	REAL, INTENT(IN) :: pdtphys
64	REAL, DIMENSION(klon), INTENT(IN) :: pphis
65	REAL, DIMENSION(klon, klev), INTENT(IN) :: pplay, d_u, d_t
66	REAL, DIMENSION(klon, klev+1), INTENT(IN) :: paprs
67	REAL, DIMENSION(klon,klev,nqtot), INTENT(IN):: qx, d_qx
68	REAL, DIMENSION(klon, klev), INTENT(IN) :: zmasse
69
70
71	REAL,DIMENSION(klon),INTENT(IN) :: rlon
72	REAL,DIMENSION(klon),INTENT(IN) :: rlat
73	INTEGER, INTENT(IN) :: pim
74	INTEGER, DIMENSION(pim) :: tabij
75	INTEGER,DIMENSION(pim), INTENT(IN) :: ipt, jpt
76	REAL,DIMENSION(pim), INTENT(IN) :: plat, plon
77	REAL,DIMENSION(pim,2) :: plat_bounds, plon_bounds
78
79	INTEGER :: jjmp1
80	INTEGER :: nlevSTD, radpas
81	LOGICAL :: ok_mensuel, ok_journe, ok_hf, ok_instan
82	LOGICAL :: ok_LES,ok_ade,ok_aie
83	INTEGER :: flag_aerosol_strat
84	LOGICAL :: aerosol_couple
85	INTEGER, INTENT(IN):: read_climoz ! read ozone climatology
86	! Allowed values are 0, 1 and 2
87	! 0: do not read an ozone climatology
88	! 1: read a single ozone climatology that will be used day and night
89	! 2: read two ozone climatologies, the average day and night
90	! climatology and the daylight climatology
91
92	REAL :: dtime
93	INTEGER :: idayref
94	REAL :: zjulian_start, zjulian
95	CHARACTER(LEN=4), DIMENSION(nlevSTD) :: clevSTD
96	REAL, DIMENSION(nlevSTD) :: rlevSTD
97	INTEGER :: nsrf, k, iq, iff, i, j, ilev, itr, ixt, iiso, izone
98	INTEGER :: naero
99	LOGICAL :: ok_veget
100	INTEGER :: iflag_pbl
101	INTEGER :: iflag_pbl_split
102	CHARACTER(LEN=4) :: bb2
103	CHARACTER(LEN=2) :: bb3
104	CHARACTER(LEN=6) :: type_ocean
105	INTEGER, DIMENSION(nbp_lon*jjmp1) :: ndex2d
106	INTEGER, DIMENSION(nbp_lonjjmp1klev) :: ndex3d
107	INTEGER :: imin_ins, imax_ins
108	INTEGER :: jmin_ins, jmax_ins
109	INTEGER, DIMENSION(nfiles) :: phys_out_levmin, phys_out_levmax
110	INTEGER, DIMENSION(nfiles) :: phys_out_filelevels
111	CHARACTER(LEN=20), DIMENSION(nfiles) :: chtimestep = (/ 'Default', 'Default', 'Default', 'Default', 'Default', &
112	'Default', 'Default', 'Default', 'Default', 'Default' /)
113	LOGICAL, DIMENSION(nfiles) :: phys_out_filekeys
114	LOGICAL, DIMENSION(nfiles) :: phys_out_filestations
115
116	CHARACTER(LEN=maxlen) :: tnam, lnam, dn
117	INTEGER :: flag(nfiles)
118
119	!!!!!!!!!! stockage dans une region limitee pour chaque fichier !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
120	! entre [phys_out_lonmin,phys_out_lonmax] et [phys_out_latmin,phys_out_latmax]
121	LOGICAL, DIMENSION(nfiles), SAVE :: &
122	phys_out_regfkey = [.FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE.]
123	REAL, DIMENSION(nfiles), SAVE :: &
124	phys_out_lonmin = [ -180., -180., -180., -180., -180., -180., -180., -180., -180., -180.], &
125	phys_out_lonmax = [ 180., 180., 180., 180., 180., 180., 180., 180., 180., 180.], &
126	phys_out_latmin = [ -90., -90., -90., -90., -90., -90., -90., -90., -90., -90.], &
127	phys_out_latmax = [ 90., 90., 90., 90., 90., 90., 90., 90., 90., 90.]
128	REAL, DIMENSION(klev,2) :: Ahyb_bounds, Bhyb_bounds
129	REAL, DIMENSION(klev+1) :: lev_index
130
131	#ifdef CPP_XIOS
132	! ug Variables utilis\'ees pour r\'ecup\'erer le calendrier pour xios
133	INTEGER :: x_an, x_mois, x_jour
134	REAL :: x_heure
135	INTEGER :: ini_an, ini_mois, ini_jour
136	REAL :: ini_heure
137	#endif
138	INTEGER :: ISW
139	REAL, DIMENSION(NSW) :: wl1_sun, wl2_sun !wavelength bounds (in um) for SW
140	REAL, DIMENSION(NSW) :: wn1_sun, wn2_sun !wavenumber bounds (in m-1) for SW
141	REAL, DIMENSION(NSW) :: spectband !mean wavenumb. of each sp.band
142	REAL, DIMENSION(NSW,2) :: spbnds_sun !bounds of spectband
143
144	WRITE(lunout,*) 'Debut phys_output_mod.F90'
145	! Initialisations (Valeurs par defaut
146
147	DO ilev=1,klev
148	Ahyb_bounds(ilev,1) = ap(ilev)
149	Ahyb_bounds(ilev,2) = ap(ilev+1)
150	Bhyb_bounds(ilev,1) = bp(ilev)
151	Bhyb_bounds(ilev,2) = bp(ilev+1)
152	lev_index(ilev) = REAL(ilev)
153	END DO
154	lev_index(klev+1) = REAL(klev+1)
155
156	IF (.NOT. ALLOCATED(o_trac)) ALLOCATE(o_trac(nqtot))
157	IF (.NOT. ALLOCATED(o_trac_cum)) ALLOCATE(o_trac_cum(nqtot))
158	ALLOCATE(o_dtr_the(nqtot),o_dtr_con(nqtot),o_dtr_lessi_impa(nqtot))
159	ALLOCATE(o_dtr_lessi_nucl(nqtot),o_dtr_insc(nqtot),o_dtr_bcscav(nqtot))
160	ALLOCATE(o_dtr_evapls(nqtot),o_dtr_ls(nqtot),o_dtr_trsp(nqtot))
161	ALLOCATE(o_dtr_sscav(nqtot),o_dtr_sat(nqtot),o_dtr_uscav(nqtot))
162	ALLOCATE(o_dtr_dry(nqtot),o_dtr_vdf(nqtot))
163
164	levmax = [klev, klev, klev, klev, klev, klev, nlevSTD, nlevSTD, nlevSTD, klev]
165
166	phys_out_filenames(1) = 'histmth'
167	phys_out_filenames(2) = 'histday'
168	phys_out_filenames(3) = 'histhf6h'
169	phys_out_filenames(4) = 'histhf3h'
170	phys_out_filenames(5) = 'histhf3hm'
171	phys_out_filenames(6) = 'histstn'
172	phys_out_filenames(7) = 'histmthNMC'
173	phys_out_filenames(8) = 'histdayNMC'
174	phys_out_filenames(9) = 'histhfNMC'
175	phys_out_filenames(10)= 'histstrataer'
176
177	type_ecri(1) = 'ave(X)'
178	type_ecri(2) = 'ave(X)'
179	type_ecri(3) = 'inst(X)'
180	type_ecri(4) = 'inst(X)'
181	type_ecri(5) = 'ave(X)'
182	type_ecri(6) = 'inst(X)'
183	type_ecri(7) = 'inst(X)'
184	type_ecri(8) = 'inst(X)'
185	type_ecri(9) = 'inst(X)'
186	type_ecri(10)= 'ave(X)'
187
188	clef_files(1) = ok_mensuel
189	clef_files(2) = ok_journe
190	clef_files(3) = ok_hf
191	clef_files(4) = ok_instan
192	clef_files(5) = ok_LES
193	clef_files(6) = ok_instan
194	clef_files(7) = ok_histNMC(1)
195	clef_files(8) = ok_histNMC(2)
196	clef_files(9) = ok_histNMC(3)
197	#ifdef CPP_StratAer
198	clef_files(10)= .TRUE.
199	#else
200	clef_files(10)= .FALSE.
201	#endif
202
203	!sortir des fichiers "stations" si clef_stations(:)=.TRUE.
204	clef_stations(1) = .FALSE.
205	clef_stations(2) = .FALSE.
206	clef_stations(3) = .FALSE.
207	clef_stations(4) = .FALSE.
208	clef_stations(5) = .FALSE.
209	clef_stations(6) = .FALSE.
210	clef_stations(7) = .FALSE.
211	clef_stations(8) = .FALSE.
212	clef_stations(9) = .FALSE.
213	clef_stations(10)= .FALSE.
214
215	lev_files(1) = lev_histmth
216	lev_files(2) = lev_histday
217	lev_files(3) = lev_histhf
218	lev_files(4) = lev_histins
219	lev_files(5) = lev_histLES
220	lev_files(6) = lev_histins
221	lev_files(7) = levout_histNMC(1)
222	lev_files(8) = levout_histNMC(2)
223	lev_files(9) = levout_histNMC(3)
224	lev_files(10)= 5
225
226	ecrit_files(1) = ecrit_mth
227	ecrit_files(2) = ecrit_day
228	ecrit_files(3) = ecrit_hf
229	ecrit_files(4) = ecrit_ins
230	ecrit_files(5) = ecrit_LES
231	ecrit_files(6) = ecrit_ins
232	ecrit_files(7) = freq_outNMC(1)
233	ecrit_files(8) = freq_outNMC(2)
234	ecrit_files(9) = freq_outNMC(3)
235	ecrit_files(10)= ecrit_mth
236
237	!! Lectures des parametres de sorties dans physiq.def
238
239	CALL getin('phys_out_regfkey',phys_out_regfkey)
240	CALL getin('phys_out_lonmin',phys_out_lonmin)
241	CALL getin('phys_out_lonmax',phys_out_lonmax)
242	CALL getin('phys_out_latmin',phys_out_latmin)
243	CALL getin('phys_out_latmax',phys_out_latmax)
244	phys_out_levmin(:)=levmin(:)
245	CALL getin('phys_out_levmin',levmin)
246	phys_out_levmax(:)=levmax(:)
247	CALL getin('phys_out_levmax',levmax)
248	CALL getin('phys_out_filenames',phys_out_filenames)
249	phys_out_filekeys(:)=clef_files(:)
250	CALL getin('phys_out_filekeys',clef_files)
251	phys_out_filestations(:)=clef_stations(:)
252	CALL getin('phys_out_filestations',clef_stations)
253	phys_out_filelevels(:)=lev_files(:)
254	CALL getin('phys_out_filelevels',lev_files)
255	CALL getin('phys_out_filetimesteps',chtimestep)
256	phys_out_filetypes(:)=type_ecri(:)
257	CALL getin('phys_out_filetypes',type_ecri)
258
259	type_ecri_files(:)=type_ecri(:)
260
261	! if (ok_all_xml) phys_out_filelevels = 999
262
263	WRITE(lunout,*)'phys_out_lonmin=',phys_out_lonmin
264	WRITE(lunout,*)'phys_out_lonmax=',phys_out_lonmax
265	WRITE(lunout,*)'phys_out_latmin=',phys_out_latmin
266	WRITE(lunout,*)'phys_out_latmax=',phys_out_latmax
267	WRITE(lunout,*)'phys_out_filenames=',phys_out_filenames
268	WRITE(lunout,*)'phys_out_filetypes=',type_ecri
269	WRITE(lunout,*)'phys_out_filekeys=',clef_files
270	WRITE(lunout,*)'phys_out_filestations=',clef_stations
271	WRITE(lunout,*)'phys_out_filelevels=',lev_files
272	WRITE(lunout,*)'phys_out_regfkey=',phys_out_regfkey
273
274	! A noter pour
275	! l heure initiale - dans les fichiers histoire hist* - on met comme
276	! heure de debut soit la vraie heure (pour le 1D) soit 0h (pour le 3D)
277	! afin d avoir une seule sortie mensuelle par mois lorsque l on tourne
278	! par annee (IM).
279	!
280	idayref = day_ref
281	IF (klon_glo==1) THEN
282	! current_time (used to compute hour) is updated at the begining of
283	! the physics; to set the correct outputs "initial time" we thus
284	! have to use (hour-dtphys).
285	CALL ymds2ju(annee_ref, 1, idayref, hour-pdtphys, zjulian)
286	print *,'phys_output_mod: annee,iday,hour,zjulian=',annee_ref,idayref, hour, zjulian
287	ELSE
288	CALL ymds2ju(annee_ref, 1, idayref, 0.0, zjulian)
289	CALL ymds2ju(annee_ref, 1, day_ini, start_time*rday, zjulian_start)
290	ENDIF
291
292	#ifdef CPP_XIOS
293	! ug R\'eglage du calendrier xios
294	!Temps julian => an, mois, jour, heure
295	CALL ju2ymds(zjulian, x_an, x_mois, x_jour, x_heure)
296	CALL ju2ymds(zjulian_start, ini_an, ini_mois, ini_jour, ini_heure)
297	CALL wxios_set_cal(dtime, calend, x_an, x_mois, x_jour, x_heure, ini_an, &
298	ini_mois, ini_jour, ini_heure )
299	#endif
300
301	!!!!!!!!!!!!!!!!!!!!!!! Boucle sur les fichiers !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
302	! Appel de histbeg et histvert pour creer le fichier et les niveaux verticaux !!
303	! Appel des histbeg pour definir les variables (nom, moy ou inst, freq de sortie ..
304	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
305
306	zdtime_moy = dtime ! Frequence ou l on moyenne
307
308
309	ecrit_files(7) = ecrit_files(1)
310	ecrit_files(8) = ecrit_files(2)
311	ecrit_files(9) = ecrit_files(3)
312
313	DO iff=1,nfiles
314
315	! Calculate ecrit_files for all files
316	IF ( chtimestep(iff).eq.'Default' ) THEN
317	! Par defaut ecrit_files = (ecrit_mensuel ecrit_jour ecrit_hf
318	! ...)*86400.
319	ecrit_files(iff)=ecrit_files(iff)*86400.
320	ELSE IF (chtimestep(iff).eq.'-1') THEN
321	PRINT*,'ecrit_files(',iff,') < 0 so IOIPSL work on different'
322	PRINT*,'months length'
323	ecrit_files(iff)=-1.
324	ELSE
325	CALL convers_timesteps(chtimestep(iff),dtime,ecrit_files(iff))
326	ENDIF
327
328	WRITE(lunout,*)'ecrit_files(',iff,')= ',ecrit_files(iff)
329	zoutm(iff) = ecrit_files(iff) ! Frequence ou l on ecrit en seconde
330
331
332	#ifdef CPP_XIOS
333	!!! Ouverture de chaque fichier XIOS !!!!!!!!!!!
334	IF (.not. ok_all_xml) THEN
335	IF (prt_level >= 10) THEN
336	print*,'phys_output_open: call wxios_add_file with phys_out_filenames(iff)=',trim(phys_out_filenames(iff))
337	ENDIF
338	CALL wxios_add_file(phys_out_filenames(iff),chtimestep(iff),lev_files(iff))
339	ENDIF
340
341	!!! Declaration des axes verticaux de chaque fichier:
342	IF (prt_level >= 10) THEN
343	print*,'phys_output_open: Declare vertical axes for each file'
344	ENDIF
345
346	IF (iff.LE.6.OR.iff.EQ.10) THEN
347	CALL wxios_add_vaxis("presnivs", &
348	levmax(iff) - levmin(iff) + 1, presnivs(levmin(iff):levmax(iff)))
349	CALL wxios_add_vaxis("Ahyb", &
350	levmax(iff) - levmin(iff) + 1, aps(levmin(iff):levmax(iff)), positif='down', &
351	bnds=Ahyb_bounds(levmin(iff):levmax(iff),:))
352	CALL wxios_add_vaxis("Bhyb", &
353	levmax(iff) - levmin(iff) + 1, bps(levmin(iff):levmax(iff)), positif='down', &
354	bnds=Bhyb_bounds(levmin(iff):levmax(iff),:))
355	CALL wxios_add_vaxis("klev", levmax(iff) - levmin(iff) + 1, &
356	lev_index(levmin(iff):levmax(iff)))
357	CALL wxios_add_vaxis("klevp1", klev+1, &
358	lev_index(1:klev+1))
359	CALL wxios_add_vaxis("bnds", 2, (/1.,2./))
360
361	CALL wxios_add_vaxis("Alt", &
362	levmax(iff) - levmin(iff) + 1, pseudoalt)
363
364	! wl1_sun/wl2_sun: minimum/maximum bound of wavelength (in um)
365	SELECT CASE(NSW)
366	CASE(6)
367	wl1_sun(1:6) = [0.180, 0.250, 0.440, 0.690, 1.190, 2.380]
368	wl2_sun(1:6) = [0.250, 0.440, 0.690, 1.190, 2.380, 4.000]
369	CASE(2)
370	wl1_sun(1:2) = [0.250, 0.690]
371	wl2_sun(1:2) = [0.690, 4.000]
372	END SELECT
373
374	DO ISW=1, NSW
375	wn1_sun(ISW)=1.e+6/wl1_sun(ISW)
376	wn2_sun(ISW)=1.e+6/wl2_sun(ISW)
377	spbnds_sun(ISW,1)=wn2_sun(ISW)
378	spbnds_sun(ISW,2)=wn1_sun(ISW)
379	spectband(ISW)=(wn1_sun(ISW)+wn2_sun(ISW))/2
380	ENDDO
381	!
382	!!! ajout axe vertical spectband : solar band number
383	CALL wxios_add_vaxis("spectband", NSW, spectband, positif='down')
384	ELSE
385	! NMC files
386	CALL wxios_add_vaxis("plev", &
387	levmax(iff) - levmin(iff) + 1, rlevSTD(levmin(iff):levmax(iff)))
388	ENDIF
389	#endif
390
391	IF (clef_files(iff)) THEN
392	!!!!!!!!!!!!!!!!! Traitement dans le cas ou l'on veut stocker sur un domaine limite !!
393	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
394	IF (phys_out_regfkey(iff)) THEN
395	imin_ins=1
396	imax_ins=nbp_lon
397	jmin_ins=1
398	jmax_ins=jjmp1
399
400	! correction abderr
401	DO i=1,nbp_lon
402	WRITE(lunout,*)'io_lon(i)=',io_lon(i)
403	IF (io_lon(i).le.phys_out_lonmin(iff)) imin_ins=i
404	IF (io_lon(i).le.phys_out_lonmax(iff)) imax_ins=i+1
405	ENDDO
406
407	DO j=1,jjmp1
408	WRITE(lunout,*)'io_lat(j)=',io_lat(j)
409	IF (io_lat(j).ge.phys_out_latmin(iff)) jmax_ins=j+1
410	IF (io_lat(j).ge.phys_out_latmax(iff)) jmin_ins=j
411	ENDDO
412
413	WRITE(lunout,*)'On stoke le fichier histoire numero ',iff,' sur ', &
414	imin_ins,imax_ins,jmin_ins,jmax_ins
415	WRITE(lunout,*)'longitudes : ', &
416	io_lon(imin_ins),io_lon(imax_ins), &
417	'latitudes : ', &
418	io_lat(jmax_ins),io_lat(jmin_ins)
419
420	CALL histbeg(phys_out_filenames(iff),nbp_lon,io_lon,jjmp1,io_lat, &
421	imin_ins,imax_ins-imin_ins+1, &
422	jmin_ins,jmax_ins-jmin_ins+1, &
423	itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff))
424	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
425	!IM fichiers stations
426	ELSE IF (clef_stations(iff)) THEN
427
428	IF (prt_level >= 10) THEN
429	WRITE(lunout,*)'phys_output_open: iff=',iff,' phys_out_filenames(iff)=',phys_out_filenames(iff)
430	ENDIF
431
432	CALL histbeg_phy_all(rlon,rlat,pim,tabij,ipt,jpt,plon,plat,plon_bounds,plat_bounds, &
433	phys_out_filenames(iff), &
434	itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff))
435	ELSE
436
437	IF (prt_level >= 10) THEN
438	WRITE(lunout,*)'phys_output_open: iff=',iff,' phys_out_filenames(iff)=',phys_out_filenames(iff)
439	ENDIF
440
441	CALL histbeg_phy_all(phys_out_filenames(iff),itau_phy,zjulian,&
442	dtime,nhorim(iff),nid_files(iff))
443	ENDIF
444
445	#ifndef CPP_IOIPSL_NO_OUTPUT
446	IF (iff.LE.6.OR.iff.EQ.10) THEN
447	CALL histvert(nid_files(iff), "presnivs", "Vertical levels", "Pa", &
448	levmax(iff) - levmin(iff) + 1, &
449	presnivs(levmin(iff):levmax(iff)), nvertm(iff),"down")
450	!!!! Composantes de la coordonnee sigma-hybride
451	CALL histvert(nid_files(iff), "Ahyb","Ahyb comp of Hyb Cord ", "Pa", &
452	levmax(iff) - levmin(iff) + 1,aps,nvertap(iff))
453
454	CALL histvert(nid_files(iff), "Bhyb","Bhyb comp of Hyb Cord", " ", &
455	levmax(iff) - levmin(iff) + 1,bps,nvertbp(iff))
456
457	CALL histvert(nid_files(iff), "Alt","Height approx for scale heigh of 8km at levels", "Km", &
458	levmax(iff) - levmin(iff) + 1,pseudoalt,nvertAlt(iff))
459
460	ELSE
461	! NMC files
462	CALL histvert(nid_files(iff), "plev", "pressure", "Pa", &
463	levmax(iff) - levmin(iff) + 1, &
464	rlevSTD(levmin(iff):levmax(iff)), nvertm(iff), "down")
465	ENDIF
466	#endif
467
468	ENDIF ! clef_files
469
470	itr = 0
471	DO iq = 1, nqtot
472	IF(.NOT.(tracers(iq)%isAdvected .AND. tracers(iq)%isInPhysics)) CYCLE
473	itr = itr + 1
474	dn = 'd'//TRIM(tracers(iq)%name)//'_'
475
476	flag = [1, 5, 5, 5, 10, 10, 11, 11, 11, 11]
477	lnam = 'Tracer '//TRIM(tracers(iq)%longName)
478	tnam = TRIM(tracers(iq)%name); o_trac (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
479
480	flag = [4, 7, 7, 7, 10, 10, 11, 11, 11, 11]
481	lnam = 'Tendance tracer '//TRIM(tracers(iq)%longName)
482	tnam = TRIM(dn)//'vdf'; o_dtr_vdf (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
483
484	flag = [5, 7, 7, 7, 10, 10, 11, 11, 11, 11]
485	tnam = TRIM(dn)//'the'; o_dtr_the (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
486	tnam = TRIM(dn)//'con'; o_dtr_con (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
487
488	flag = [7, 7, 7, 7, 10, 10, 11, 11, 11, 11]
489	tnam = TRIM(dn)//'lessi_impa'; o_dtr_lessi_impa(itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
490	tnam = TRIM(dn)//'lessi_nucl'; o_dtr_lessi_nucl(itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
491	tnam = TRIM(dn)//'insc'; o_dtr_insc (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
492	tnam = TRIM(dn)//'bcscav'; o_dtr_bcscav (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
493	tnam = TRIM(dn)//'evapls'; o_dtr_evapls (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
494	tnam = TRIM(dn)//'ls'; o_dtr_ls (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
495	tnam = TRIM(dn)//'trsp'; o_dtr_trsp (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
496	tnam = TRIM(dn)//'sscav'; o_dtr_sscav (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
497	tnam = TRIM(dn)//'sat'; o_dtr_sat (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
498	tnam = TRIM(dn)//'uscav'; o_dtr_uscav (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
499
500	lnam = 'tracer tendency dry deposition'//TRIM(tracers(iq)%longName)
501	tnam = 'cum'//TRIM(dn)//'dry'; o_dtr_dry (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
502
503	flag = [1, 4, 10, 10, 10, 10, 11, 11, 11, 11]
504	lnam = 'Cumulated tracer '//TRIM(tracers(iq)%longName)
505	tnam = 'cum'//TRIM(tracers(iq)%name); o_trac_cum(itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
506	ENDDO
507
508	ENDDO ! iff
509
510	! Updated write frequencies due to phys_out_filetimesteps.
511	! Write frequencies are now in seconds.
512	ecrit_mth = ecrit_files(1)
513	ecrit_day = ecrit_files(2)
514	ecrit_hf = ecrit_files(3)
515	ecrit_ins = ecrit_files(4)
516	ecrit_LES = ecrit_files(5)
517	ecrit_ins = ecrit_files(6)
518
519	IF (prt_level >= 10) THEN
520	WRITE(lunout,*)'swaerofree_diag=',swaerofree_diag
521	WRITE(lunout,*)'swaero_diag=',swaero_diag
522	WRITE(lunout,*)'dryaod_diag=',dryaod_diag
523	WRITE(lunout,*)'ok_4xCO2atm=',ok_4xCO2atm
524	WRITE(lunout,*)'phys_output_open: ends here'
525	ENDIF
526
527	! DO iq=1,nqtot
528	! IF(.NOT.(tracers(iq)%isAdvected .AND. tracers(iq)%isInPhysics)) CYCLE
529	! WRITE(*,'(a,i1,a,10i3)')'trac(',iq,')%flag = ',o_trac(iq)%flag
530	! WRITE(*,'(a,i1,a)')'trac(',iq,')%name = '//TRIM(o_trac(iq)%name)
531	! WRITE(*,'(a,i1,a)')'trac(',iq,')%description = '//TRIM(o_trac(iq)%description)
532	! END DO
533
534	END SUBROUTINE phys_output_open
535
536	SUBROUTINE convers_timesteps(str,dtime,timestep)
537
538	use ioipsl
539	USE phys_cal_mod
540	USE time_phylmdz_mod, ONLY: day_ref, annee_ref
541	USE print_control_mod, ONLY: lunout
542
543	IMPLICIT NONE
544
545	CHARACTER(LEN=20) :: str
546	CHARACTER(LEN=10) :: type
547	INTEGER :: ipos,il
548	real :: ttt,xxx,timestep,dayseconde,dtime
549	parameter (dayseconde=86400.)
550
551	ipos=scan(str,'0123456789.',.TRUE.)
552	!
553	il=len_trim(str)
554	WRITE(lunout,*) "ipos = ", ipos
555	WRITE(lunout,*) "il = ", il
556	IF (ipos == 0) CALL abort_physic("convers_timesteps", "bad str", 1)
557	read(str(1:ipos),*) ttt
558	WRITE(lunout,*)ttt
559	type=str(ipos+1:il)
560
561	IF ( il == ipos ) THEN
562	type='day'
563	ENDIF
564
565	IF ( type == 'day'.or.type == 'days'.or.type == 'jours'.or.type == 'jour' ) timestep = ttt * dayseconde
566	IF ( type == 'mounths'.or.type == 'mth'.or.type == 'mois' ) THEN
567	WRITE(lunout,*)'annee_ref,day_ref mon_len',annee_ref,day_ref,mth_len
568	timestep = ttt * dayseconde * mth_len
569	ENDIF
570	IF ( type == 'hours'.or.type == 'hr'.or.type == 'heurs') timestep = ttt * dayseconde / 24.
571	IF ( type == 'mn'.or.type == 'minutes' ) timestep = ttt * 60.
572	IF ( type == 's'.or.type == 'sec'.or.type == 'secondes' ) timestep = ttt
573	IF ( type == 'TS' ) timestep = ttt * dtime
574
575	WRITE(lunout,*)'type = ',type
576	WRITE(lunout,*)'nb j/h/m = ',ttt
577	WRITE(lunout,*)'timestep(s)=',timestep
578
579	END SUBROUTINE convers_timesteps
580
581	END MODULE phys_output_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format