source: LMDZ6/trunk/libf/phylmd/ecrad/test/ifs/Makefile @ 4773

Last change on this file since 4773 was 4773, checked in by idelkadi, 12 months ago
  • Update of Ecrad in LMDZ The same organization of the Ecrad offline version is retained in order to facilitate the updating of Ecrad in LMDZ and the comparison between online and offline results. version 1.6.1 of Ecrad (​https://github.com/lguez/ecrad.git)
  • Implementation of the double call of Ecrad in LMDZ


File size: 8.7 KB
RevLine 
[4773]1INPUT = ecrad_meridian
2
3#DRIVER = totalview ../../bin/ecrad -a
4DRIVER = ../../bin/ecrad
5IFS_DRIVER = ../../bin/ecrad_ifs
6IFS_DRIVER_BLOCKED = ../../bin/ecrad_ifs_blocked
7CHANGENAM = ../common/change_namelist.sh
8
9# Various configuration files corresponding to cycles of ECMWF's
10# Integrated Forecasting System (IFS)
11#CONFIG = configCY43R3.nam
12#CONFIG = configCY46R1.nam
13#CONFIG = configCY47R1.nam
14#CONFIG = configCY47R3.nam
15CONFIG = configCY49R1.nam
16CONFIG_ECCKD = configCY49R1_ecckd.nam
17
18# Typing "make" will run radiation scheme on IFS profiles
19all: test
20
21test: test_orig test_ecckd
22
23# Tests of CY47R1 configuration with RRTMG gas optics model and
24# various solvers
25test_orig: test_default test_noaer test_expexp test_vec test_tripleclouds test_spartacus \
26        test_spartacus_maxentr
27
28# Tests of ecCKD gas optics model and various solvers
29test_ecckd: test_ecckd_mcica test_ecckd_tc test_ecckd_tc_noaer test_ecckd_spartacus
30
31# Default IFS settings: McICA solver with exponential-exponential
32# overlap
33test_default:
34        $(DRIVER) $(CONFIG) $(INPUT).nc $(INPUT)_default_out.nc
35
36test_ifsdriver:
37        $(CHANGENAM) $(CONFIG) config_net.nam do_save_net_fluxes=true do_write_double_precision=true \
38                sw_solver_name='"Tripleclouds"' lw_solver_name='"Tripleclouds"'
39        $(IFS_DRIVER) config_net.nam $(INPUT).nc $(INPUT)_ifsdriver_out.nc | tee $(INPUT)_ifsdriver_out.log
40        $(DRIVER) config_net.nam $(INPUT).nc $(INPUT)_net_out.nc | tee $(INPUT)_net_out.log
41
42test_ifsdriver_blocked:
43        $(CHANGENAM) $(CONFIG) config_net.nam do_save_net_fluxes=true do_write_double_precision=true \
44                sw_solver_name='"Tripleclouds"' lw_solver_name='"Tripleclouds"'
45        $(IFS_DRIVER_BLOCKED) config_net.nam $(INPUT).nc $(INPUT)_ifsdriver_blocked_out.nc | tee $(INPUT)_ifsdriver_blocked_out.log
46        $(DRIVER) config_net.nam $(INPUT).nc $(INPUT)_net_out.nc | tee $(INPUT)_net_out.log
47
48# Turn off aerosols
49test_noaer:
50        $(CHANGENAM) $(CONFIG) config_noaer.nam \
51                use_aerosols=false
52        $(DRIVER) config_noaer.nam $(INPUT).nc $(INPUT)_noaer_out.nc
53
54# Older exponential-exponential overlap
55test_expexp:
56        $(CHANGENAM) $(CONFIG) config_expexp.nam \
57                overlap_scheme_name='"Exp-Exp"'
58        $(DRIVER) config_expexp.nam $(INPUT).nc $(INPUT)_expexp_out.nc
59
60# Tripleclouds solver with exponential-random overlap
61test_tripleclouds:
62        $(CHANGENAM) $(CONFIG) config_tc.nam \
63                sw_solver_name='"Tripleclouds"' lw_solver_name='"Tripleclouds"'
64        $(DRIVER) config_tc.nam $(INPUT).nc $(INPUT)_tc_out.nc
65
66# Longwave scattering; since 46R1 this is the default
67test_lwscat:
68        $(CHANGENAM) $(CONFIG) config_lwscat.nam \
69                do_lw_cloud_scattering="true"
70        $(DRIVER) config_lwscat.nam $(INPUT).nc $(INPUT)_lwscat_out.nc
71
72# 3D radiative transfer
73test_spartacus:
74        $(CHANGENAM) $(CONFIG) config_spartacus.nam \
75                sw_solver_name='"SPARTACUS"' lw_solver_name='"SPARTACUS"' \
76                do_3d_effects="true" \
77                do_sw_delta_scaling_with_gases="false"
78        $(DRIVER) config_spartacus.nam $(INPUT).nc $(INPUT)_spartacus_out.nc
79
80# 3D radiative transfer using the older "maximum entrapment"
81test_spartacus_maxentr:
82        $(CHANGENAM) $(CONFIG) config_spartacus_maxentr.nam \
83                sw_solver_name='"SPARTACUS"' lw_solver_name='"SPARTACUS"' \
84                do_3d_effects="true" \
85                sw_entrapment_name='"Maximum"' \
86                do_sw_delta_scaling_with_gases="false"
87        $(DRIVER) config_spartacus_maxentr.nam $(INPUT).nc $(INPUT)_spartacus_maxentr_out.nc
88
89# "Cloudless" solver
90test_cloudless:
91        $(CHANGENAM) $(CONFIG) config_cloudless.nam \
92                use_aerosols=false \
93                sw_solver_name='"Cloudless"' lw_solver_name='"Cloudless"'
94        $(DRIVER) config_cloudless.nam $(INPUT).nc $(INPUT)_cloudless_out.nc
95
96# Exponential-random overlap with "vectorizable" cloud generator
97test_vec:
98        $(CHANGENAM) $(CONFIG) config_vec.nam use_vectorizable_generator=true
99        $(DRIVER) config_vec.nam $(INPUT).nc $(INPUT)_vec_out.nc
100
101
102### The following targets use the $CONFIG_ECCKD configuration file ###
103
104# ecCKD gas optics scheme (note that default solver is Tripleclouds)
105test_ecckd_mcica:
106        $(CHANGENAM) $(CONFIG_ECCKD) config_ecckd_mcica.nam \
107                sw_solver_name='"McICA"' lw_solver_name='"McICA"'
108        $(DRIVER) config_ecckd_mcica.nam $(INPUT).nc $(INPUT)_ecckd_mcica_out.nc
109
110# ecCKD with Tripleclouds solver (default)
111test_ecckd_tc:
112        $(DRIVER) $(CONFIG_ECCKD) $(INPUT).nc $(INPUT)_ecckd_tc_out.nc
113
114# ecCKD with no aerosols
115test_ecckd_noaer:
116        $(CHANGENAM) $(CONFIG_ECCKD) config_ecckd_noaer.nam \
117                use_aerosols=false
118        $(DRIVER) config_ecckd_noaer.nam $(INPUT).nc $(INPUT)_ecckd_noaer_out.nc
119
120# Test the different ways that aerosol optical properties can be
121# averaged, outputing the aerosol properties in each gas-optics
122# spectral interval, producing the following:
123#   aerosol_optics_rrtmg.nc: RRTMG gas optics, aerosol properties from band-wise file
124#   aerosol_optics_ecckd.nc: ecCKD gas optics, aerosol properties from high-res file
125#   aerosol_optics_rrtmg.nc: RRTMG gas optics, aerosol properties from high-res file
126#   aerosol_optics_ecckd.nc: ecCKD gas optics, aerosol properties from band-wise file
127test_aerosol_averaging:
128        $(CHANGENAM) $(CONFIG) config_rrtmg_saveaer.nam \
129                do_save_aerosol_optics=true
130        $(DRIVER) config_rrtmg_saveaer.nam $(INPUT).nc $(INPUT)_rrtmg_saveaer_out.nc
131        mv aerosol_optics.nc aerosol_optics_rrtmg.nc
132        $(CHANGENAM) $(CONFIG_ECCKD) config_ecckd_saveaer.nam \
133                do_save_aerosol_optics=true
134        $(DRIVER) config_ecckd_saveaer.nam $(INPUT).nc $(INPUT)_ecckd_saveaer_out.nc
135        mv aerosol_optics.nc aerosol_optics_ecckd.nc
136        $(CHANGENAM) $(CONFIG) config_rrtmg_gen_saveaer.nam \
137                do_save_aerosol_optics=true use_general_aerosol_optics=true \
138                aerosol_optics_override_file_name="'aerosol_ifs_48R1.nc'" 
139        $(DRIVER) config_rrtmg_gen_saveaer.nam $(INPUT).nc $(INPUT)_rrtmg_gen_saveaer_out.nc
140        mv aerosol_optics.nc aerosol_optics_rrtmg_gen.nc
141        $(CHANGENAM) $(CONFIG_ECCKD) config_ecckd_band_saveaer.nam \
142                do_save_aerosol_optics=true \
143                aerosol_optics_override_file_name="'aerosol_ifs_rrtm_46R1_with_NI_AM.nc'" 
144        $(DRIVER) config_ecckd_band_saveaer.nam $(INPUT).nc $(INPUT)_ecckd_band_saveaer_out.nc
145        mv aerosol_optics.nc aerosol_optics_ecckd_band.nc
146
147# ecCKD gas optics with SPARTACUS solver (not currently correct)
148test_ecckd_spartacus:
149        $(CHANGENAM) $(CONFIG_ECCKD) config_ecckd_spartacus.nam \
150                sw_solver_name='"SPARTACUS"' lw_solver_name='"SPARTACUS"' \
151                do_3d_effects="true" 
152        $(DRIVER) config_ecckd_spartacus.nam $(INPUT).nc $(INPUT)_ecckd_spartacus_out.nc
153
154# ecCKD gas optics with no aerosol
155test_ecckd_tc_noaer:
156        $(CHANGENAM) $(CONFIG_ECCKD) config_ecckd_tc_noaer.nam \
157                use_aerosols=false 
158        $(DRIVER) config_ecckd_tc_noaer.nam $(INPUT).nc $(INPUT)_ecckd_tc_noaer_out.nc
159
160# Profiling
161TAG = default
162profile:
163        mkdir -p profiling_$(TAG)
164        $(CHANGENAM) $(CONFIG) config_profile.nam \
165                nrepeat=100 do_save_spectral_flux=false
166        DR_HOOK=1 DR_HOOK_OPT=prof DR_HOOK_PROFILE=profiling_$(TAG)/$(INPUT)_default_prof_out.drhook \
167                $(DRIVER) config_profile.nam $(INPUT).nc $(INPUT)_default_prof_out.nc \
168                | tee $(INPUT)_default_prof_out.log
169        if [[ -f gmon.out ]]; then gprof $(DRIVER) gmon.out > profiling_$(TAG)/$(INPUT)_default_prof_out.gprof; fi
170        $(CHANGENAM) $(CONFIG_ECCKD) config_profile.nam \
171                nrepeat=100 do_save_spectral_flux=false do_save_radiative_properties=false
172        DR_HOOK=1 DR_HOOK_OPT=prof DR_HOOK_PROFILE=profiling_$(TAG)/$(INPUT)_ecckd_tc_prof_out.drhook \
173                $(DRIVER) config_profile.nam $(INPUT).nc $(INPUT)_ecckd_tc_prof_out.nc \
174                | tee $(INPUT)_ecckd_tc_prof_out.log
175        if [[ -f gmon.out ]]; then gprof $(DRIVER) gmon.out > $(INPUT)_ecckd_tc_prof_out.gprof; fi
176
177        mv $(INPUT)_*_prof_out.* profiling_$(TAG)
178
179# ecCKD gas optics with spectral diagnostics every 25nm in the visible
180# written to a separate file; do this both with the 32- and 96-gpoint
181# models (which have 100nm and 25nm resolution in the visible,
182# respectively).
183DIAGBOUNDS="sw_diag_wavelength_bound=.2e-6,.225e-6,.25e-6,.275e-6,.3e-6,.325e-6,.35e-6,.375e-6,.4e-6,.425e-6,.45e-6,.475e-6,.5e-6,.525e-6,.55e-6,.575e-6,.6e-6,.625e-6,.65e-6,.675e-6,.7e-6"
184test_diag:
185        $(CHANGENAM) $(CONFIG_ECCKD) config_diag.nam $(DIAGBOUNDS) sw_diag_file_name='"sw_diag_rrtmg.nc"' gas_model_name='"RRTMG-IFS"'
186        $(DRIVER) config_diag.nam $(INPUT).nc $(INPUT)_diag_rrtmg_out.nc
187        $(CHANGENAM) $(CONFIG_ECCKD) config_ecckd_diag.nam $(DIAGBOUNDS) sw_diag_file_name='"sw_diag_rgb_orig.nc"'
188        $(DRIVER) config_ecckd_diag.nam $(INPUT).nc $(INPUT)_ecckd_diag_rgb_orig_out.nc
189        $(CHANGENAM) $(CONFIG_ECCKD) config_ecckd_diag.nam $(DIAGBOUNDS) sw_diag_file_name='"sw_diag_rgb.nc"' \
190                gas_optics_sw_override_file_name='"ecckd-1.4_sw_climate_rgb-32b_ckd-definition.nc"'
191        $(DRIVER) config_ecckd_diag.nam $(INPUT).nc $(INPUT)_ecckd_diag_rgb_out.nc
192        $(CHANGENAM) $(CONFIG_ECCKD) config_ecckd_diag.nam $(DIAGBOUNDS) sw_diag_file_name='"sw_diag_vfine.nc"' \
193                gas_optics_sw_override_file_name='"ecckd-1.4_sw_climate_vfine-96b_ckd-definition.nc"'
194        $(DRIVER) config_ecckd_diag.nam $(INPUT).nc $(INPUT)_ecckd_diag_vfine_out.nc
195
196# Clean data files
197clean:
198        rm -f *_out.nc tmp*.nc radiative_properties*.nc inputs.nc sw_diag*nc \
199        config_*.nam gmon.out
Note: See TracBrowser for help on using the repository browser.