Context Navigation

radiation_scheme_mod.F90 @ 4948

Last change on this file since 4948 was 4911, checked in by idelkadi, 7 months ago

Introduction of 2 routines for LMDZ-ECRAD :

One for LMDZ (calcul_cloud_overlap_decorr_len.F90) to calculate the decorrelation length (Ld) in the case of "Exp-Ran" cloud overlap.
1. Ld=constant
2. Ld=linear function of the absolute value of latitude (Shonk and Hogan 2010)
3. Ld=function of vertical level
One for Ecrad (set_overlap_param_var2D in radiation_cloud.F90) : Compute and store the overlap parameter from the provided overlap decorrelation length, which depends on vertical level.

Translated with DeepL.com (free version)

File size: 54.3 KB

Line
1	! AI mars 2021
2	! ====================== Interface between ECRAD and LMDZ ====================
3	! Depart de la version IFS R.H
4	! radiation_scheme.F90 appelee dans radlwsw_m.F90 si iflag_rttm = 2
5	! revoir toutes les parties avec "AI ATTENTION"
6	! Mars 2021 :
7	! - Revoir toutes les parties commentees AI ATTENTION
8	! 1. Traitement des aerosols
9	! 2. Verifier les parametres times issus de LMDZ (calcul issed)
10	! 3. Configuration a partir de namelist
11	! 4. frac_std = 0.75
12	! Juillet 2023 :
13	!
14	! ============================================================================
15	module interface_lmdz_ecrad
16
17	IMPLICIT NONE
18
19	contains
20
21	SUBROUTINE RADIATION_SCHEME &
22	! Inputs
23	& (KIDIA, KFDIA, KLON, KLEV, KAEROSOL, NSW, &
24	& namelist_file, ok_3Deffect, &
25	& debut, ok_volcan, flag_aerosol_strat, &
26	& IDAY, TIME, &
27	& PSOLAR_IRRADIANCE, &
28	& PMU0, PTEMPERATURE_SKIN, &
29	& PALBEDO_DIF, PALBEDO_DIR, &
30	& PEMIS, PEMIS_WINDOW, &
31	& PGELAM, PGEMU, &
32	& PPRESSURE_H, PTEMPERATURE_H, PQ, PQSAT, &
33	& PCO2, PCH4, PN2O, PNO2, PCFC11, PCFC12, PHCFC22, &
34	& PCCL4, PO3, PO2, &
35	& PCLOUD_FRAC, PQ_LIQUID, PQ_ICE, PQ_SNOW, &
36	& ZRE_LIQUID_UM, ZRE_ICE_UM, &
37	& PAEROSOL_OLD, PAEROSOL, &
38	! Outputs
39	& PFLUX_SW, PFLUX_LW, PFLUX_SW_CLEAR, PFLUX_LW_CLEAR, &
40	& PFLUX_SW_DN, PFLUX_LW_DN, PFLUX_SW_DN_CLEAR, PFLUX_LW_DN_CLEAR, &
41	& PFLUX_SW_UP, PFLUX_LW_UP, PFLUX_SW_UP_CLEAR, PFLUX_LW_UP_CLEAR, &
42	& PFLUX_DIR, PFLUX_DIR_CLEAR, PFLUX_DIR_INTO_SUN, &
43	& PFLUX_UV, PFLUX_PAR, PFLUX_PAR_CLEAR, &
44	& PEMIS_OUT, PLWDERIVATIVE, &
45	& PSWDIFFUSEBAND, PSWDIRECTBAND, &
46	& ecrad_cloud_cover_sw)
47
48	!-----------------------------------------------------------------------
49
50	! Modules from ifs or ifsaux libraries
51	USE PARKIND1 , ONLY : JPIM, JPRB
52	USE YOMHOOK , ONLY : LHOOK, DR_HOOK
53	USE RADIATION_SETUP
54	USE YOMCST , ONLY : RSIGMA ! Stefan-Boltzmann constant
55
56	! Modules from radiation library
57	USE radiation_single_level, ONLY : single_level_type
58	USE radiation_thermodynamics, ONLY : thermodynamics_type
59	USE radiation_gas
60	USE radiation_cloud, ONLY : cloud_type
61	USE radiation_aerosol, ONLY : aerosol_type
62	USE radiation_flux, ONLY : flux_type
63	USE radiation_interface, ONLY : radiation, set_gas_units
64	USE radiation_save, ONLY : save_inputs
65
66	USE mod_phys_lmdz_para
67
68	IMPLICIT NONE
69
70	! INPUT ARGUMENTS
71	! *** Array dimensions and ranges
72	INTEGER(KIND=JPIM),INTENT(IN) :: KIDIA ! Start column to process
73	INTEGER(KIND=JPIM),INTENT(IN) :: KFDIA ! End column to process
74	INTEGER(KIND=JPIM),INTENT(IN) :: KLON ! Number of columns
75	INTEGER(KIND=JPIM),INTENT(IN) :: KLEV ! Number of levels
76	INTEGER(KIND=JPIM),INTENT(IN) :: KAEROSOL
77	INTEGER(KIND=JPIM),INTENT(IN) :: NSW ! Numbe of bands
78
79	! AI ATTENTION
80	!INTEGER, PARAMETER :: KAEROSOL = 12
81
82	! *** Single-level fields
83	REAL(KIND=JPRB), INTENT(IN) :: PSOLAR_IRRADIANCE ! (W m-2)
84	REAL(KIND=JPRB), INTENT(IN) :: PMU0(KLON) ! Cosine of solar zenith ang
85	REAL(KIND=JPRB), INTENT(IN) :: PTEMPERATURE_SKIN(KLON) ! (K)
86	! Diffuse and direct components of surface shortwave albedo
87	!REAL(KIND=JPRB), INTENT(IN) :: PALBEDO_DIF(KLON,YRERAD%NSW)
88	!REAL(KIND=JPRB), INTENT(IN) :: PALBEDO_DIR(KLON,YRERAD%NSW)
89	REAL(KIND=JPRB), INTENT(IN) :: PALBEDO_DIF(KLON,NSW)
90	REAL(KIND=JPRB), INTENT(IN) :: PALBEDO_DIR(KLON,NSW)
91	! Longwave emissivity outside and inside the window region
92	REAL(KIND=JPRB), INTENT(IN) :: PEMIS(KLON)
93	REAL(KIND=JPRB), INTENT(IN) :: PEMIS_WINDOW(KLON)
94	! Longitude (radians), sine of latitude
95	REAL(KIND=JPRB), INTENT(IN) :: PGELAM(KLON)
96	REAL(KIND=JPRB), INTENT(IN) :: PGEMU(KLON)
97	! Land-sea mask
98	!REAL(KIND=JPRB), INTENT(IN) :: PLAND_SEA_MASK(KLON)
99
100	! *** Variables on half levels
101	REAL(KIND=JPRB), INTENT(IN) :: PPRESSURE_H(KLON,KLEV+1) ! (Pa)
102	REAL(KIND=JPRB), INTENT(IN) :: PTEMPERATURE_H(KLON,KLEV+1) ! (K)
103
104	! *** Gas mass mixing ratios on full levels
105	REAL(KIND=JPRB), INTENT(IN) :: PQ(KLON,KLEV)
106	! AI
107	REAL(KIND=JPRB), INTENT(IN) :: PQSAT(KLON,KLEV)
108	REAL(KIND=JPRB), INTENT(IN) :: PCO2
109	REAL(KIND=JPRB), INTENT(IN) :: PCH4
110	REAL(KIND=JPRB), INTENT(IN) :: PN2O
111	REAL(KIND=JPRB), INTENT(IN) :: PNO2
112	REAL(KIND=JPRB), INTENT(IN) :: PCFC11
113	REAL(KIND=JPRB), INTENT(IN) :: PCFC12
114	REAL(KIND=JPRB), INTENT(IN) :: PHCFC22
115	REAL(KIND=JPRB), INTENT(IN) :: PCCL4
116	REAL(KIND=JPRB), INTENT(IN) :: PO3(KLON,KLEV) ! AI (kg/kg) ATTENTION (Pa*kg/kg)
117	REAL(KIND=JPRB), INTENT(IN) :: PO2
118
119	! *** Cloud fraction and hydrometeor mass mixing ratios
120	REAL(KIND=JPRB), INTENT(IN) :: PCLOUD_FRAC(KLON,KLEV)
121	REAL(KIND=JPRB), INTENT(IN) :: PQ_LIQUID(KLON,KLEV)
122	REAL(KIND=JPRB), INTENT(IN) :: PQ_ICE(KLON,KLEV)
123	!REAL(KIND=JPRB), INTENT(IN) :: PQ_RAIN(KLON,KLEV)
124	REAL(KIND=JPRB), INTENT(IN) :: PQ_SNOW(KLON,KLEV)
125
126	! *** Aerosol mass mixing ratios
127	REAL(KIND=JPRB), INTENT(IN) :: PAEROSOL_OLD(KLON,6,KLEV)
128	REAL(KIND=JPRB), INTENT(IN) :: PAEROSOL(KLON,KLEV,KAEROSOL)
129
130	!REAL(KIND=JPRB), INTENT(IN) :: PCCN_LAND(KLON)
131	!REAL(KIND=JPRB), INTENT(IN) :: PCCN_SEA(KLON)
132
133	!AI mars 2021
134	INTEGER(KIND=JPIM), INTENT(IN) :: IDAY
135	REAL(KIND=JPRB), INTENT(IN) :: TIME
136
137	! Name of file names specified on command line
138	character(len=512), INTENT(IN) :: namelist_file
139	logical, INTENT(IN) :: ok_3Deffect, debut, ok_volcan
140	INTEGER(KIND=JPIM), INTENT(IN) :: flag_aerosol_strat
141
142
143	! OUTPUT ARGUMENTS
144
145	! *** Net fluxes on half-levels (W m-2)
146	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_SW(KLON,KLEV+1)
147	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_LW(KLON,KLEV+1)
148	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_SW_CLEAR(KLON,KLEV+1)
149	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_LW_CLEAR(KLON,KLEV+1)
150
151	!*** DN and UP flux on half-levels (W m-2)
152	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_SW_DN(KLON,KLEV+1)
153	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_LW_DN(KLON,KLEV+1)
154	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_SW_DN_CLEAR(KLON,KLEV+1)
155	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_LW_DN_CLEAR(KLON,KLEV+1)
156	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_SW_UP(KLON,KLEV+1)
157	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_LW_UP(KLON,KLEV+1)
158	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_SW_UP_CLEAR(KLON,KLEV+1)
159	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_LW_UP_CLEAR(KLON,KLEV+1)
160
161	! Direct component of surface flux into horizontal plane
162	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_DIR(KLON)
163	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_DIR_CLEAR(KLON)
164	! As PFLUX_DIR but into a plane perpendicular to the sun
165	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_DIR_INTO_SUN(KLON)
166
167	! *** Ultraviolet and photosynthetically active radiation (W m-2)
168	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_UV(KLON)
169	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_PAR(KLON)
170	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_PAR_CLEAR(KLON)
171
172	! Diagnosed longwave surface emissivity across the whole spectrum
173	REAL(KIND=JPRB), INTENT(OUT) :: PEMIS_OUT(KLON)
174
175	! Partial derivative of total-sky longwave upward flux at each level
176	! with respect to upward flux at surface, used to correct heating
177	! rates at gridpoints/timesteps between calls to the full radiation
178	! scheme. Note that this version uses the convention of level index
179	! increasing downwards, unlike the local variable ZLwDerivative that
180	! is returned from the LW radiation scheme.
181	REAL(KIND=JPRB), INTENT(OUT) :: PLWDERIVATIVE(KLON,KLEV+1)
182
183	! Surface diffuse and direct downwelling shortwave flux in each
184	! shortwave albedo band, used in RADINTG to update the surface fluxes
185	! accounting for high-resolution albedo information
186	REAL(KIND=JPRB), INTENT(OUT) :: PSWDIFFUSEBAND(KLON,NSW)
187	REAL(KIND=JPRB), INTENT(OUT) :: PSWDIRECTBAND (KLON,NSW)
188
189	!AI Nov 2023
190	REAL(KIND=JPRB), INTENT(OUT) :: ecrad_cloud_cover_sw(KLON)
191
192	! LOCAL VARIABLES
193	! AI ATTENTION
194	type(config_type),save :: rad_config
195	!!$OMP THREADPRIVATE(rad_config)
196	type(driver_config_type),save :: driver_config
197	!!$OMP THREADPRIVATE(driver_config)
198	TYPE(single_level_type) :: single_level
199	TYPE(thermodynamics_type) :: thermodynamics
200	TYPE(gas_type) :: gas
201	TYPE(cloud_type) :: cloud
202	TYPE(aerosol_type) :: aerosol
203	TYPE(flux_type) :: flux
204
205	! Mass mixing ratio of ozone (kg/kg)
206	REAL(KIND=JPRB) :: ZO3(KLON,KLEV)
207
208	! Cloud effective radii in microns
209	REAL(KIND=JPRB) :: ZRE_LIQUID_UM(KLON,KLEV)
210	REAL(KIND=JPRB) :: ZRE_ICE_UM(KLON,KLEV)
211
212	! Cloud overlap decorrelation length for cloud boundaries in km
213	REAL(KIND=JPRB) :: ZDECORR_LEN_M
214	REAL(KIND=JPRB) :: ZDECORR_LEN_M_1D(KLON)
215	REAL(KIND=JPRB) :: ZDECORR_LEN_M_2D(KLON,KLEV)
216
217	! Ratio of cloud overlap decorrelation length for cloud water
218	! inhomogeneities to that for cloud boundaries (typically 0.5)
219	!REAL(KIND=JPRB) :: ZDECORR_LEN_RATIO = 0.5_jprb
220
221	! The surface net longwave flux if the surface was a black body, used
222	! to compute the effective broadband surface emissivity
223	REAL(KIND=JPRB) :: ZBLACK_BODY_NET_LW(KIDIA:KFDIA)
224
225	! Layer mass in kg m-2
226	REAL(KIND=JPRB) :: ZLAYER_MASS(KIDIA:KFDIA,KLEV)
227
228	! Time integers
229	INTEGER :: ITIM
230
231	! Loop indices
232	INTEGER :: JLON, JLEV, JBAND, JB_ALBEDO, JAER
233
234	REAL(KIND=JPRB) :: ZHOOK_HANDLE
235
236	! AI ATTENTION traitement aerosols
237	INTEGER, PARAMETER :: NAERMACC = 1
238
239	logical :: loutput=.true.
240	logical :: lprint_input=.false.
241	logical :: lprint_config=.false.
242	logical, save :: debut_ecrad=.true.
243	!$OMP THREADPRIVATE(debut_ecrad)
244	integer, save :: itap_ecrad=0
245	!$OMP THREADPRIVATE(itap_ecrad)
246
247	REAL(KIND=JPRB) :: inv_cloud_effective_size(KLON,KLEV)
248	REAL(KIND=JPRB) :: inv_inhom_effective_size(KLON,KLEV)
249
250	integer :: irang
251
252
253	IF (LHOOK) CALL DR_HOOK('RADIATION_SCHEME',0,ZHOOK_HANDLE)
254
255	print*,'Entree radiation_scheme, ok_3Deffect, namelist_file = ', &
256	ok_3Deffect, namelist_file
257	! A.I juillet 2023 :
258	! Initialisation dans radiation_setup au 1er passage dans Ecrad
259	!$OMP MASTER
260	if (debut_ecrad) then
261	call SETUP_RADIATION_SCHEME(loutput,namelist_file,rad_config,driver_config)
262	debut_ecrad=.false.
263	endif
264	!$OMP END MASTER
265	!$OMP BARRIER
266	! Fin partie initialisation et configuration
267
268	!AI print fichiers namelist utilise
269	!if (is_omp_root) then
270	! itap_ecrad=itap_ecrad+1
271	! print*,'Dans radiation_scheme itap_ecrad, mpi_rank, omp_rank, namelist_file : ', &
272	! itap_ecrad, mpi_rank, omp_rank, namelist_file
273	!else
274	! print*,'mpi_rank omp_rank, namelist_file :', mpi_rank, omp_rank, namelist_file
275	!endif
276
277	! AI 11 23 Allocates depplaces au debut
278	print,'******** ALLOCATES *****************************'
279	! AI ATTENTION
280	! Allocate memory in radiation objects
281	! emissivite avec une seule bande
282	CALL single_level%allocate(KLON, NSW, 1, &
283	& use_sw_albedo_direct=.TRUE.)
284	CALL thermodynamics%allocate(KLON, KLEV, use_h2o_sat=.true.)
285	CALL cloud%allocate(KLON, KLEV)
286	CALL aerosol%allocate(KLON, 1, KLEV, KAEROSOL)
287	CALL gas%allocate(KLON, KLEV)
288	CALL flux%allocate(rad_config, 1, KLON, KLEV)
289
290	print,'********** THERMO (input) **********************************'
291	! AI
292	! pressure_hl > paprs
293	! temperature_hl calculee dans radlsw de la meme facon que pour RRTM
294	thermodynamics%pressure_hl (KIDIA:KFDIA,:) = PPRESSURE_H (KIDIA:KFDIA,:)
295	thermodynamics%temperature_hl(KIDIA:KFDIA,:) = PTEMPERATURE_H(KIDIA:KFDIA,:)
296	!print*,'Compute saturation specific humidity'
297	! Compute saturation specific humidity, used to hydrate aerosols. The
298	! "2" for the last argument indicates that the routine is not being
299	! called from within the convection scheme.
300	!CALL SATUR(KIDIA, KFDIA, KLON, 1, KLEV, &
301	! & PPRESSURE, PTEMPERATURE, thermodynamics%h2o_sat_liq, 2)
302	! Alternative approximate version using temperature and pressure from
303	! the thermodynamics structure
304	!CALL thermodynamics%calc_saturation_wrt_liquid(KIDIA, KFDIA)
305	!AI ATTENTION
306	thermodynamics%h2o_sat_liq = PQSAT
307
308	print,'******* SINGLE LEVEL VARS ********************************'
309	!AI ATTENTION
310	! Set single-level fileds
311	single_level%solar_irradiance = PSOLAR_IRRADIANCE
312	single_level%cos_sza(KIDIA:KFDIA) = PMU0(KIDIA:KFDIA)
313	single_level%skin_temperature(KIDIA:KFDIA) = PTEMPERATURE_SKIN(KIDIA:KFDIA)
314	single_level%sw_albedo(KIDIA:KFDIA,:) = PALBEDO_DIF(KIDIA:KFDIA,:)
315	single_level%sw_albedo_direct(KIDIA:KFDIA,:)=PALBEDO_DIR(KIDIA:KFDIA,:)
316	single_level%lw_emissivity(KIDIA:KFDIA,1) = PEMIS(KIDIA:KFDIA)
317	!single_level%lw_emissivity(KIDIA:KFDIA,2) = PEMIS_WINDOW(KIDIA:KFDIA)
318
319	! Create the relevant seed from date and time get the starting day
320	! and number of minutes since start
321	!IDAY = NDD(NINDAT)
322	!cur_day
323	!ITIM = NINT(NSTEP * YRRIP%TSTEP / 60.0_JPRB)
324	!ITIM = NINT(TIME / 60.0_JPRB)
325	!current_time
326	!allocate(single_level%iseed(KIDIA:KFDIA))
327	!DO JLON = KIDIA, KFDIA
328	! This method gives a unique value for roughly every 1-km square
329	! on the globe and every minute. ASIN(PGEMU)*60 gives rough
330	! latitude in degrees, which we multiply by 100 to give a unique
331	! value for roughly every km. PGELAM60100 gives a unique number
332	! for roughly every km of longitude around the equator, which we
333	! multiply by 180*100 so there is no overlap with the latitude
334	! values. The result can be contained in a 32-byte integer (but
335	! since random numbers are generated with the help of integer
336	! overflow, it should not matter if the number did overflow).
337	! single_level%iseed(JLON) = ITIM + IDAY &
338	! & + NINT(PGELAM(JLON)*108000000.0_JPRB &
339	! & + ASIN(PGEMU(JLON))*6000.0_JPRB)
340	!ENDDO
341	!AI Nov 23
342	! Simple initialization of the seeds for the Monte Carlo scheme
343	call single_level%init_seed_simple(kidia, kfdia)
344
345	print,'******* CLOUDS (allocate + input) *****************************************'
346	!print*,'Appel Allocate clouds'
347	! Set cloud fields
348	cloud%q_liq(KIDIA:KFDIA,:) = PQ_LIQUID(KIDIA:KFDIA,:)
349	cloud%q_ice(KIDIA:KFDIA,:) = PQ_ICE(KIDIA:KFDIA,:) + PQ_SNOW(KIDIA:KFDIA,:)
350	cloud%fraction(KIDIA:KFDIA,:) = PCLOUD_FRAC(KIDIA:KFDIA,:)
351	!!! ok AI ATTENTION a voir avec JL
352	! Compute effective radi and convert to metres
353	! AI. : on passe directement les champs de LMDZ
354	cloud%re_liq(KIDIA:KFDIA,:) = ZRE_LIQUID_UM(KIDIA:KFDIA,:)
355	cloud%re_ice(KIDIA:KFDIA,:) = ZRE_ICE_UM(KIDIA:KFDIA,:)
356	! Get the cloud overlap decorrelation length (for cloud boundaries),
357	! in km, according to the parameterization specified by NDECOLAT,
358	! and insert into the "cloud" object. Also get the ratio of
359	! decorrelation lengths for cloud water content inhomogeneities and
360	! cloud boundaries, and set it in the "rad_config" object.
361	! IFS :
362	!CALL CLOUD_OVERLAP_DECORR_LEN(KIDIA, KFDIA, KLON, PGEMU, YRERAD%NDECOLAT, &
363	! & ZDECORR_LEN_KM, PDECORR_LEN_RATIO=ZDECORR_LEN_RATIO)
364	CALL CALCUL_CLOUD_OVERLAP_DECORR_LEN &
365	& (KIDIA, KFDIA, KLON, KLEV, &
366	& driver_config, &
367	& thermodynamics%pressure_hl, &
368	& ZDECORR_LEN_M_2D)
369
370	if (driver_config%kdecolat.eq.0) then
371	ZDECORR_LEN_M = ZDECORR_LEN_M_2D(1,1)
372	DO JLON = KIDIA,KFDIA
373	CALL cloud%set_overlap_param(thermodynamics, &
374	& ZDECORR_LEN_M, &
375	& istartcol=JLON, iendcol=JLON)
376	ENDDO
377	else if (driver_config%kdecolat.eq.1.or.driver_config%kdecolat.eq.2) then
378	ZDECORR_LEN_M_1D = ZDECORR_LEN_M_2D(:,1)
379	DO JLON = KIDIA,KFDIA
380	CALL cloud%set_overlap_param(thermodynamics, &
381	& ZDECORR_LEN_M_1D, &
382	& istartcol=JLON, iendcol=JLON)
383	ENDDO
384	else if (driver_config%kdecolat.eq.3) then
385	DO JLON = KIDIA,KFDIA
386	CALL cloud%set_overlap_param_var2D(thermodynamics, &
387	& ZDECORR_LEN_M_2D, KLEV, &
388	& istartcol=JLON, iendcol=JLON)
389	ENDDO
390	endif
391
392
393
394	! IFS :
395	! Cloud water content fractional standard deviation is configurable
396	! from namelist NAERAD but must be globally constant. Before it was
397	! hard coded at 1.0.
398	!CALL cloud%create_fractional_std(KLON, KLEV, YRERAD%RCLOUD_FRAC_STD)
399	! AI ATTENTION frac_std=0.75 meme valeur que dans la version offline
400	CALL cloud%create_fractional_std(KLON, KLEV, driver_config%frac_std)
401
402	!if (ok_3Deffect) then
403	! if (driver_config%ok_effective_size) then
404	! call cloud%create_inv_cloud_effective_size_eta(klon, klev, &
405	! & thermodynamics%pressure_hl, &
406	! & driver_config%low_inv_effective_size, &
407	! & driver_config%middle_inv_effective_size, &
408	! & driver_config%high_inv_effective_size, 0.8_jprb, 0.45_jprb, &
409	! & KIDIA, KFDIA)
410	! else if (driver_config%ok_separation) then
411	! call cloud%param_cloud_effective_separation_eta(klon, klev, &
412	! & thermodynamics%pressure_hl, &
413	! & driver_config%cloud_separation_scale_surface, &
414	! & driver_config%cloud_separation_scale_toa, &
415	! & driver_config%cloud_separation_scale_power, &
416	! & driver_config%cloud_inhom_separation_factor, &
417	! & KIDIA, KFDIA)
418	! endif
419	! else
420	if (rad_config%i_solver_sw == ISolverSPARTACUS &
421	& .or. rad_config%i_solver_lw == ISolverSPARTACUS) then
422	! AI ! Read cloud properties needed by SPARTACUS
423	if (driver_config%ok_effective_size) then
424	call cloud%create_inv_cloud_effective_size_eta(klon, klev, &
425	& thermodynamics%pressure_hl, &
426	& driver_config%low_inv_effective_size, &
427	& driver_config%middle_inv_effective_size, &
428	& driver_config%high_inv_effective_size, 0.8_jprb, 0.45_jprb, &
429	& KIDIA, KFDIA)
430	else if (driver_config%ok_separation) then
431	call cloud%param_cloud_effective_separation_eta(klon, klev, &
432	& thermodynamics%pressure_hl, &
433	& driver_config%cloud_separation_scale_surface, &
434	& driver_config%cloud_separation_scale_toa, &
435	& driver_config%cloud_separation_scale_power, &
436	& driver_config%cloud_inhom_separation_factor, &
437	& KIDIA, KFDIA)
438	endif
439	endif
440	!endif
441
442	print,'***** AEROSOLS (input) ************************************'
443	!IF (NAERMACC > 0) THEN
444	!ELSE
445	! CALL aerosol%allocate(KLON, 1, KLEV, 6) ! Tegen climatology
446	!ENDIF
447	! Compute the dry mass of each layer neglecting humidity effects, in
448	! kg m-2, needed to scale some of the aerosol inputs
449	! AI commente ATTENTION
450	!CALL thermodynamics%get_layer_mass(ZLAYER_MASS)
451
452	! Copy over aerosol mass mixing ratio
453	!IF (NAERMACC > 0) THEN
454
455	! MACC aerosol climatology - this is already in mass mixing ratio
456	! units with the required array orientation so we can copy it over
457	! directly
458	aerosol%mixing_ratio(KIDIA:KFDIA,:,:) = PAEROSOL(KIDIA:KFDIA,:,:)
459
460	! Add the tropospheric and stratospheric backgrounds contained in the
461	! old Tegen arrays - this is very ugly!
462	! AI ATTENTION
463	! IF (TROP_BG_AER_MASS_EXT > 0.0_JPRB) THEN
464	! aerosol%mixing_ratio(KIDIA:KFDIA,:,ITYPE_TROP_BG_AER) &
465	! & = aerosol%mixing_ratio(KIDIA:KFDIA,:,ITYPE_TROP_BG_AER) &
466	! & + PAEROSOL_OLD(KIDIA:KFDIA,1,:) &
467	! & / (ZLAYER_MASS * TROP_BG_AER_MASS_EXT)
468	! ENDIF
469	! IF (STRAT_BG_AER_MASS_EXT > 0.0_JPRB) THEN
470	! aerosol%mixing_ratio(KIDIA:KFDIA,:,ITYPE_STRAT_BG_AER) &
471	! & = aerosol%mixing_ratio(KIDIA:KFDIA,:,ITYPE_STRAT_BG_AER) &
472	! & + PAEROSOL_OLD(KIDIA:KFDIA,6,:) &
473	! & / (ZLAYER_MASS * STRAT_BG_AER_MASS_EXT)
474	! ENDIF
475
476	!ELSE
477
478	! Tegen aerosol climatology - the array PAEROSOL_OLD contains the
479	! 550-nm optical depth in each layer. The optics data file
480	! aerosol_ifs_rrtm_tegen.nc does not contain mass extinction
481	! coefficient, but a scaling factor that the 550-nm optical depth
482	! should be multiplied by to obtain the optical depth in each
483	! spectral band. Therefore, in order for the units to work out, we
484	! need to divide by the layer mass (in kg m-2) to obtain the 550-nm
485	! cross-section per unit mass of dry air (so in m2 kg-1). We also
486	! need to permute the array.
487	! DO JLEV = 1,KLEV
488	! DO JAER = 1,6
489	! aerosol%mixing_ratio(KIDIA:KFDIA,JLEV,JAER) &
490	! & = PAEROSOL_OLD(KIDIA:KFDIA,JAER,JLEV) &
491	! & / ZLAYER_MASS(KIDIA:KFDIA,JLEV)
492	! ENDDO
493	! ENDDO
494	!ENDIF
495
496	print,'******* GAS (input) **********************************************'
497	!print*,'Appel Allocate gas'
498	! Convert ozone Pa*kg/kg to kg/kg
499	! AI ATTENTION
500	!DO JLEV = 1,KLEV
501	! DO JLON = KIDIA,KFDIA
502	! ZO3(JLON,JLEV) = PO3_DP(JLON,JLEV) &
503	! & / (PPRESSURE_H(JLON,JLEV+1)-PPRESSURE_H(JLON,JLEV))
504	! ENDDO
505	!ENDDO
506	! Insert gas mixing ratios
507	!print*,'Insert gas mixing ratios'
508	CALL gas%put(IH2O, IMassMixingRatio, PQ)
509	CALL gas%put(IO3, IMassMixingRatio, PO3)
510	CALL gas%put_well_mixed(ICO2, IMAssMixingRatio, PCO2)
511	CALL gas%put_well_mixed(ICH4, IMassMixingRatio, PCH4)
512	CALL gas%put_well_mixed(IN2O, IMassMixingRatio, PN2O)
513	CALL gas%put_well_mixed(ICFC11, IMassMixingRatio, PCFC11)
514	CALL gas%put_well_mixed(ICFC12, IMassMixingRatio, PCFC12)
515	CALL gas%put_well_mixed(IHCFC22, IMassMixingRatio, PHCFC22)
516	CALL gas%put_well_mixed(ICCL4, IMassMixingRatio, PCCL4)
517	CALL gas%put_well_mixed(IO2, IMassMixingRatio, PO2)
518	! Ensure the units of the gas mixing ratios are what is required by
519	! the gas absorption model
520	call set_gas_units(rad_config, gas)
521
522	! Call radiation scheme
523	!print,' Appel radiation * namelist ** omp_rank **', &
524	! omp_rank, namelist_file
525	! if (rad_config%i_solver_sw == ISolverSPARTACUS) then
526	! if (driver_config%ok_separation) then
527	! print*,'Avant radiation, mpi_rank, omp_rank, size, chape inv_cloud = ',&
528	! mpi_rank, omp_rank, &
529	! shape(cloud%inv_cloud_effective_size), &
530	! size(cloud%inv_cloud_effective_size)
531	! do jlon=KIDIA, KFDIA
532	! do jlev=1,klev
533	! print*,' Avant radiation mpi_rank, omp_rank, jlon, jlev, &
534	! & cloud%inv_cloud_effective_size =', mpi_rank, &
535	! & omp_rank, jlon, jlev, &
536	! & cloud%inv_cloud_effective_size(jlon,jlev)
537	! enddo
538	! enddo
539	! cloud%inv_cloud_effective_size=inv_cloud_effective_size
540	! cloud%inv_inhom_effective_size=inv_inhom_effective_size
541	! endif
542	! endif
543	CALL radiation(KLON, KLEV, KIDIA, KFDIA, rad_config, &
544	& single_level, thermodynamics, gas, cloud, aerosol, flux)
545
546	if (rad_config%use_aerosols) then
547	if (rad_config%i_gas_model_sw == IGasModelIFSRRTMG .or. &
548	& rad_config%i_gas_model_lw == IGasModelIFSRRTMG) then
549	CALL aeropt_5wv_ecrad(kidia, kfdia, 1, klev, &
550	& rad_config,thermodynamics, aerosol)
551	endif
552
553	if (flag_aerosol_strat.eq.2) then
554	CALL readaerosolstrato_ecrad(rad_config, debut, ok_volcan)
555	endif
556	endif
557
558	print,'******** Sortie flux **************'
559	! Cloud cover
560	ecrad_cloud_cover_sw = flux%cloud_cover_sw
561	! Compute required output fluxes
562	! DN and UP flux
563	PFLUX_SW_DN(KIDIA:KFDIA,:) = flux%sw_dn(KIDIA:KFDIA,:)
564	PFLUX_SW_UP(KIDIA:KFDIA,:) = flux%sw_up(KIDIA:KFDIA,:)
565	PFLUX_LW_DN(KIDIA:KFDIA,:) = flux%lw_dn(KIDIA:KFDIA,:)
566	PFLUX_LW_UP(KIDIA:KFDIA,:) = flux%lw_up(KIDIA:KFDIA,:)
567	PFLUX_SW_DN_CLEAR(KIDIA:KFDIA,:) = flux%sw_dn_clear(KIDIA:KFDIA,:)
568	PFLUX_SW_UP_CLEAR(KIDIA:KFDIA,:) = flux%sw_up_clear(KIDIA:KFDIA,:)
569	PFLUX_LW_DN_CLEAR(KIDIA:KFDIA,:) = flux%lw_dn_clear(KIDIA:KFDIA,:)
570	PFLUX_LW_UP_CLEAR(KIDIA:KFDIA,:) = flux%lw_up_clear(KIDIA:KFDIA,:)
571	! First the net fluxes
572	PFLUX_SW(KIDIA:KFDIA,:) = flux%sw_dn(KIDIA:KFDIA,:) - flux%sw_up(KIDIA:KFDIA,:)
573	PFLUX_LW(KIDIA:KFDIA,:) = flux%lw_dn(KIDIA:KFDIA,:) - flux%lw_up(KIDIA:KFDIA,:)
574	PFLUX_SW_CLEAR(KIDIA:KFDIA,:) &
575	& = flux%sw_dn_clear(KIDIA:KFDIA,:) - flux%sw_up_clear(KIDIA:KFDIA,:)
576	PFLUX_LW_CLEAR(KIDIA:KFDIA,:) &
577	& = flux%lw_dn_clear(KIDIA:KFDIA,:) - flux%lw_up_clear(KIDIA:KFDIA,:)
578	! Now the surface fluxes
579	!PFLUX_SW_DN_SURF(KIDIA:KFDIA) = flux%sw_dn(KIDIA:KFDIA,KLEV+1)
580	!PFLUX_LW_DN_SURF(KIDIA:KFDIA) = flux%lw_dn(KIDIA:KFDIA,KLEV+1)
581	!PFLUX_SW_UP_SURF(KIDIA:KFDIA) = flux%sw_up(KIDIA:KFDIA,KLEV+1)
582	!PFLUX_LW_UP_SURF(KIDIA:KFDIA) = flux%lw_up(KIDIA:KFDIA,KLEV+1)
583	!PFLUX_SW_DN_CLEAR_SURF(KIDIA:KFDIA) = flux%sw_dn_clear(KIDIA:KFDIA,KLEV+1)
584	!PFLUX_LW_DN_CLEAR_SURF(KIDIA:KFDIA) = flux%lw_dn_clear(KIDIA:KFDIA,KLEV+1)
585	!PFLUX_SW_UP_CLEAR_SURF(KIDIA:KFDIA) = flux%sw_up_clear(KIDIA:KFDIA,KLEV+1)
586	!PFLUX_LW_UP_CLEAR_SURF(KIDIA:KFDIA) = flux%lw_up_clear(KIDIA:KFDIA,KLEV+1)
587	PFLUX_DIR(KIDIA:KFDIA) = flux%sw_dn_direct(KIDIA:KFDIA,KLEV+1)
588	PFLUX_DIR_CLEAR(KIDIA:KFDIA) = flux%sw_dn_direct_clear(KIDIA:KFDIA,KLEV+1)
589	PFLUX_DIR_INTO_SUN(KIDIA:KFDIA) = 0.0_JPRB
590	WHERE (PMU0(KIDIA:KFDIA) > EPSILON(1.0_JPRB))
591	PFLUX_DIR_INTO_SUN(KIDIA:KFDIA) = PFLUX_DIR(KIDIA:KFDIA) / PMU0(KIDIA:KFDIA)
592	END WHERE
593	! Top-of-atmosphere downwelling flux
594	!PFLUX_SW_DN_TOA(KIDIA:KFDIA) = flux%sw_dn(KIDIA:KFDIA,1)
595	!PFLUX_SW_UP_TOA(KIDIA:KFDIA) = flux%sw_up(KIDIA:KFDIA,1)
596	!PFLUX_LW_DN_TOA(KIDIA:KFDIA) = flux%lw_dn(KIDIA:KFDIA,1)
597	!PFLUX_LW_UP_TOA(KIDIA:KFDIA) = flux%lw_up(KIDIA:KFDIA,1)
598	!AI ATTENTION
599	if (0.eq.1) then
600	PFLUX_UV (KIDIA:KFDIA) = 0.0_JPRB
601	DO JBAND = 1,NWEIGHT_UV
602	PFLUX_UV(KIDIA:KFDIA) = PFLUX_UV(KIDIA:KFDIA) + WEIGHT_UV(JBAND) &
603	& * flux%sw_dn_surf_band(IBAND_UV(JBAND),KIDIA:KFDIA)
604	ENDDO
605	! Compute photosynthetically active radiation similarly
606	PFLUX_PAR (KIDIA:KFDIA) = 0.0_JPRB
607	PFLUX_PAR_CLEAR(KIDIA:KFDIA) = 0.0_JPRB
608	DO JBAND = 1,NWEIGHT_PAR
609	PFLUX_PAR(KIDIA:KFDIA) = PFLUX_PAR(KIDIA:KFDIA) + WEIGHT_PAR(JBAND) &
610	& * flux%sw_dn_surf_band(IBAND_PAR(JBAND),KIDIA:KFDIA)
611	PFLUX_PAR_CLEAR(KIDIA:KFDIA) = PFLUX_PAR_CLEAR(KIDIA:KFDIA) &
612	& + WEIGHT_PAR(JBAND) &
613	& * flux%sw_dn_surf_clear_band(IBAND_PAR(JBAND),KIDIA:KFDIA)
614	ENDDO
615	endif
616	! Compute effective broadband emissivity
617	ZBLACK_BODY_NET_LW = flux%lw_dn(KIDIA:KFDIA,KLEV+1) &
618	& - RSIGMAPTEMPERATURE_SKIN(KIDIA:KFDIA)*4
619	PEMIS_OUT(KIDIA:KFDIA) = PEMIS(KIDIA:KFDIA)
620	WHERE (ABS(ZBLACK_BODY_NET_LW) > 1.0E-5)
621	PEMIS_OUT(KIDIA:KFDIA) = PFLUX_LW(KIDIA:KFDIA,KLEV+1) / ZBLACK_BODY_NET_LW
622	END WHERE
623	! Copy longwave derivatives
624	! AI ATTENTION
625	!IF (YRERAD%LAPPROXLWUPDATE) THEN
626	IF (rad_config%do_lw_derivatives) THEN
627	PLWDERIVATIVE(KIDIA:KFDIA,:) = flux%lw_derivatives(KIDIA:KFDIA,:)
628	END IF
629	! Store the shortwave downwelling fluxes in each albedo band
630	!AI ATTENTION
631	!IF (YRERAD%LAPPROXSWUPDATE) THEN
632	if (0.eq.1) then
633	IF (rad_config%do_surface_sw_spectral_flux) THEN
634	PSWDIFFUSEBAND(KIDIA:KFDIA,:) = 0.0_JPRB
635	PSWDIRECTBAND (KIDIA:KFDIA,:) = 0.0_JPRB
636	DO JBAND = 1,rad_config%n_bands_sw
637	JB_ALBEDO = rad_config%i_albedo_from_band_sw(JBAND)
638	DO JLON = KIDIA,KFDIA
639	PSWDIFFUSEBAND(JLON,JB_ALBEDO) = PSWDIFFUSEBAND(JLON,JB_ALBEDO) &
640	& + flux%sw_dn_surf_band(JBAND,JLON) &
641	& - flux%sw_dn_direct_surf_band(JBAND,JLON)
642	PSWDIRECTBAND(JLON,JB_ALBEDO) = PSWDIRECTBAND(JLON,JB_ALBEDO) &
643	& + flux%sw_dn_direct_surf_band(JBAND,JLON)
644	ENDDO
645	ENDDO
646	ENDIF
647	endif
648
649	print,'******* DEALLOCATIONS **********************'
650	CALL single_level%deallocate
651	CALL thermodynamics%deallocate
652	CALL gas%deallocate
653	CALL cloud%deallocate
654	CALL aerosol%deallocate
655	CALL flux%deallocate
656
657	IF (LHOOK) CALL DR_HOOK('RADIATION_SCHEME',1,ZHOOK_HANDLE)
658
659	END SUBROUTINE RADIATION_SCHEME
660
661	SUBROUTINE RADIATION_SCHEME_S2 &
662	! Inputs
663	& (KIDIA, KFDIA, KLON, KLEV, KAEROSOL, NSW, &
664	& namelist_file, ok_3Deffect, &
665	& debut, ok_volcan, flag_aerosol_strat, &
666	& IDAY, TIME, &
667	& PSOLAR_IRRADIANCE, &
668	& PMU0, PTEMPERATURE_SKIN, &
669	& PALBEDO_DIF, PALBEDO_DIR, &
670	& PEMIS, PEMIS_WINDOW, &
671	& PGELAM, PGEMU, &
672	& PPRESSURE_H, PTEMPERATURE_H, PQ, PQSAT, &
673	& PCO2, PCH4, PN2O, PNO2, PCFC11, PCFC12, PHCFC22, &
674	& PCCL4, PO3, PO2, &
675	& PCLOUD_FRAC, PQ_LIQUID, PQ_ICE, PQ_SNOW, &
676	& ZRE_LIQUID_UM, ZRE_ICE_UM, &
677	& PAEROSOL_OLD, PAEROSOL, &
678	! Outputs
679	& PFLUX_SW, PFLUX_LW, PFLUX_SW_CLEAR, PFLUX_LW_CLEAR, &
680	& PFLUX_SW_DN, PFLUX_LW_DN, PFLUX_SW_DN_CLEAR, PFLUX_LW_DN_CLEAR, &
681	& PFLUX_SW_UP, PFLUX_LW_UP, PFLUX_SW_UP_CLEAR, PFLUX_LW_UP_CLEAR, &
682	& PFLUX_DIR, PFLUX_DIR_CLEAR, PFLUX_DIR_INTO_SUN, &
683	& PFLUX_UV, PFLUX_PAR, PFLUX_PAR_CLEAR, &
684	& PEMIS_OUT, PLWDERIVATIVE, &
685	& PSWDIFFUSEBAND, PSWDIRECTBAND, &
686	& ecrad_cloud_cover_sw)
687
688	! RADIATION_SCHEME - Interface to modular radiation scheme
689	!
690	! (C) Copyright 2015- ECMWF.
691	!
692	! This software is licensed under the terms of the Apache Licence Version 2.0
693	! which can be obtained at http://www.apache.org/licenses/LICENSE-2.0.
694	!
695	! In applying this licence, ECMWF does not waive the privileges and immunities
696	! granted to it by virtue of its status as an intergovernmental organisation
697	! nor does it submit to any jurisdiction.
698	!
699	! PURPOSE
700	! -------
701	! The modular radiation scheme is contained in a separate
702	! library. This routine puts the the IFS arrays into appropriate
703	! objects, computing the additional data that is required, and sends
704	! it to the radiation scheme. It returns net fluxes and surface
705	! flux components needed by the rest of the model.
706	!
707	! Lower case is used for variables and types taken from the
708	! radiation library
709	!
710	! INTERFACE
711	! ---------
712	! RADIATION_SCHEME is called from RADLSWR. The
713	! SETUP_RADIATION_SCHEME routine (in the RADIATION_SETUP module)
714	! should have been run first.
715	!
716	! AUTHOR
717	! ------
718	! Robin Hogan, ECMWF
719	! Original: 2015-09-16
720	!
721	! MODIFICATIONS
722	! -------------
723	!
724	! TO DO
725	! -----
726	!
727	!-----------------------------------------------------------------------
728
729	! Modules from ifs or ifsaux libraries
730	USE PARKIND1 , ONLY : JPIM, JPRB
731	USE YOMHOOK , ONLY : LHOOK, DR_HOOK
732	USE RADIATION_SETUP
733	USE YOMCST , ONLY : RSIGMA ! Stefan-Boltzmann constant
734	!USE RADIATION_SETUP, ONLY : SETUP_RADIATION_SCHEME, &
735	! & config_type, driver_config_type, &
736	! & NWEIGHT_UV, IBAND_UV, WEIGHT_UV, &
737	! & NWEIGHT_PAR, IBAND_PAR, WEIGHT_PAR, &
738	! & ITYPE_TROP_BG_AER, TROP_BG_AER_MASS_EXT, &
739	! & ITYPE_STRAT_BG_AER, STRAT_BG_AER_MASS_EXT, &
740	! & ISolverSpartacus
741
742	! Modules from radiation library
743	USE radiation_single_level, ONLY : single_level_type
744	USE radiation_thermodynamics, ONLY : thermodynamics_type
745	USE radiation_gas
746	USE radiation_cloud, ONLY : cloud_type
747	USE radiation_aerosol, ONLY : aerosol_type
748	USE radiation_flux, ONLY : flux_type
749	USE radiation_interface, ONLY : radiation, set_gas_units
750	USE radiation_save, ONLY : save_inputs
751
752	USE mod_phys_lmdz_para
753
754	IMPLICIT NONE
755
756	! INPUT ARGUMENTS
757	! *** Array dimensions and ranges
758	INTEGER(KIND=JPIM),INTENT(IN) :: KIDIA ! Start column to process
759	INTEGER(KIND=JPIM),INTENT(IN) :: KFDIA ! End column to process
760	!INTEGER, INTENT(IN) :: KIDIA, KFDIA
761	INTEGER(KIND=JPIM),INTENT(IN) :: KLON ! Number of columns
762	INTEGER(KIND=JPIM),INTENT(IN) :: KLEV ! Number of levels
763	!INTEGER, INTENT(IN) :: KLON, KLEV
764	!INTEGER(KIND=JPIM),INTENT(IN) :: KAEROLMDZ ! Number of aerosol types
765	INTEGER(KIND=JPIM),INTENT(IN) :: KAEROSOL
766	INTEGER(KIND=JPIM),INTENT(IN) :: NSW ! Numbe of bands
767
768	! AI ATTENTION
769	!INTEGER, PARAMETER :: KAEROSOL = 12
770
771	! *** Single-level fields
772	REAL(KIND=JPRB), INTENT(IN) :: PSOLAR_IRRADIANCE ! (W m-2)
773	REAL(KIND=JPRB), INTENT(IN) :: PMU0(KLON) ! Cosine of solar zenith ang
774	REAL(KIND=JPRB), INTENT(IN) :: PTEMPERATURE_SKIN(KLON) ! (K)
775	! Diffuse and direct components of surface shortwave albedo
776	!REAL(KIND=JPRB), INTENT(IN) :: PALBEDO_DIF(KLON,YRERAD%NSW)
777	!REAL(KIND=JPRB), INTENT(IN) :: PALBEDO_DIR(KLON,YRERAD%NSW)
778	REAL(KIND=JPRB), INTENT(IN) :: PALBEDO_DIF(KLON,NSW)
779	REAL(KIND=JPRB), INTENT(IN) :: PALBEDO_DIR(KLON,NSW)
780	! Longwave emissivity outside and inside the window region
781	REAL(KIND=JPRB), INTENT(IN) :: PEMIS(KLON)
782	REAL(KIND=JPRB), INTENT(IN) :: PEMIS_WINDOW(KLON)
783	! Longitude (radians), sine of latitude
784	REAL(KIND=JPRB), INTENT(IN) :: PGELAM(KLON)
785	REAL(KIND=JPRB), INTENT(IN) :: PGEMU(KLON)
786	! Land-sea mask
787	!REAL(KIND=JPRB), INTENT(IN) :: PLAND_SEA_MASK(KLON)
788
789	! *** Variables on half levels
790	REAL(KIND=JPRB), INTENT(IN) :: PPRESSURE_H(KLON,KLEV+1) ! (Pa)
791	REAL(KIND=JPRB), INTENT(IN) :: PTEMPERATURE_H(KLON,KLEV+1) ! (K)
792
793	! *** Gas mass mixing ratios on full levels
794	REAL(KIND=JPRB), INTENT(IN) :: PQ(KLON,KLEV)
795	! AI
796	REAL(KIND=JPRB), INTENT(IN) :: PQSAT(KLON,KLEV)
797	REAL(KIND=JPRB), INTENT(IN) :: PCO2
798	REAL(KIND=JPRB), INTENT(IN) :: PCH4
799	REAL(KIND=JPRB), INTENT(IN) :: PN2O
800	REAL(KIND=JPRB), INTENT(IN) :: PNO2
801	REAL(KIND=JPRB), INTENT(IN) :: PCFC11
802	REAL(KIND=JPRB), INTENT(IN) :: PCFC12
803	REAL(KIND=JPRB), INTENT(IN) :: PHCFC22
804	REAL(KIND=JPRB), INTENT(IN) :: PCCL4
805	REAL(KIND=JPRB), INTENT(IN) :: PO3(KLON,KLEV) ! AI (kg/kg) ATTENTION (Pa*kg/kg)
806	REAL(KIND=JPRB), INTENT(IN) :: PO2
807
808	! *** Cloud fraction and hydrometeor mass mixing ratios
809	REAL(KIND=JPRB), INTENT(IN) :: PCLOUD_FRAC(KLON,KLEV)
810	REAL(KIND=JPRB), INTENT(IN) :: PQ_LIQUID(KLON,KLEV)
811	REAL(KIND=JPRB), INTENT(IN) :: PQ_ICE(KLON,KLEV)
812	!REAL(KIND=JPRB), INTENT(IN) :: PQ_RAIN(KLON,KLEV)
813	REAL(KIND=JPRB), INTENT(IN) :: PQ_SNOW(KLON,KLEV)
814
815	! *** Aerosol mass mixing ratios
816	REAL(KIND=JPRB), INTENT(IN) :: PAEROSOL_OLD(KLON,6,KLEV)
817	REAL(KIND=JPRB), INTENT(IN) :: PAEROSOL(KLON,KLEV,KAEROSOL)
818
819	!REAL(KIND=JPRB), INTENT(IN) :: PCCN_LAND(KLON)
820	!REAL(KIND=JPRB), INTENT(IN) :: PCCN_SEA(KLON)
821
822	!AI mars 2021
823	INTEGER(KIND=JPIM), INTENT(IN) :: IDAY
824	REAL(KIND=JPRB), INTENT(IN) :: TIME
825
826	! Name of file names specified on command line
827	character(len=512), INTENT(IN) :: namelist_file
828	logical, INTENT(IN) :: ok_3Deffect, debut, ok_volcan
829	INTEGER(KIND=JPIM), INTENT(IN) :: flag_aerosol_strat
830
831
832	! OUTPUT ARGUMENTS
833
834	! *** Net fluxes on half-levels (W m-2)
835	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_SW(KLON,KLEV+1)
836	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_LW(KLON,KLEV+1)
837	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_SW_CLEAR(KLON,KLEV+1)
838	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_LW_CLEAR(KLON,KLEV+1)
839
840	!*** DN and UP flux on half-levels (W m-2)
841	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_SW_DN(KLON,KLEV+1)
842	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_LW_DN(KLON,KLEV+1)
843	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_SW_DN_CLEAR(KLON,KLEV+1)
844	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_LW_DN_CLEAR(KLON,KLEV+1)
845	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_SW_UP(KLON,KLEV+1)
846	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_LW_UP(KLON,KLEV+1)
847	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_SW_UP_CLEAR(KLON,KLEV+1)
848	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_LW_UP_CLEAR(KLON,KLEV+1)
849
850	! Direct component of surface flux into horizontal plane
851	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_DIR(KLON)
852	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_DIR_CLEAR(KLON)
853	! As PFLUX_DIR but into a plane perpendicular to the sun
854	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_DIR_INTO_SUN(KLON)
855
856	! *** Ultraviolet and photosynthetically active radiation (W m-2)
857	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_UV(KLON)
858	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_PAR(KLON)
859	REAL(KIND=JPRB), INTENT(OUT) :: PFLUX_PAR_CLEAR(KLON)
860
861	! Diagnosed longwave surface emissivity across the whole spectrum
862	REAL(KIND=JPRB), INTENT(OUT) :: PEMIS_OUT(KLON)
863
864	! Partial derivative of total-sky longwave upward flux at each level
865	! with respect to upward flux at surface, used to correct heating
866	! rates at gridpoints/timesteps between calls to the full radiation
867	! scheme. Note that this version uses the convention of level index
868	! increasing downwards, unlike the local variable ZLwDerivative that
869	! is returned from the LW radiation scheme.
870	REAL(KIND=JPRB), INTENT(OUT) :: PLWDERIVATIVE(KLON,KLEV+1)
871
872	! Surface diffuse and direct downwelling shortwave flux in each
873	! shortwave albedo band, used in RADINTG to update the surface fluxes
874	! accounting for high-resolution albedo information
875	REAL(KIND=JPRB), INTENT(OUT) :: PSWDIFFUSEBAND(KLON,NSW)
876	REAL(KIND=JPRB), INTENT(OUT) :: PSWDIRECTBAND (KLON,NSW)
877
878	!AI Nov 2023
879	REAL(KIND=JPRB), INTENT(OUT) :: ecrad_cloud_cover_sw(KLON)
880
881	! LOCAL VARIABLES
882	! AI ATTENTION
883	type(config_type),save :: rad_config
884	!!$OMP THREADPRIVATE(rad_config)
885	type(driver_config_type),save :: driver_config
886	!!$OMP THREADPRIVATE(driver_config)
887	!type(config_type) :: rad_config
888	!type(driver_config_type) :: driver_config
889	TYPE(single_level_type) :: single_level
890	TYPE(thermodynamics_type) :: thermodynamics
891	TYPE(gas_type) :: gas
892	TYPE(cloud_type) :: cloud
893	TYPE(aerosol_type) :: aerosol
894	TYPE(flux_type) :: flux
895
896	! Mass mixing ratio of ozone (kg/kg)
897	REAL(KIND=JPRB) :: ZO3(KLON,KLEV)
898
899	! Cloud effective radii in microns
900	REAL(KIND=JPRB) :: ZRE_LIQUID_UM(KLON,KLEV)
901	REAL(KIND=JPRB) :: ZRE_ICE_UM(KLON,KLEV)
902
903	! Cloud overlap decorrelation length for cloud boundaries in km
904	REAL(KIND=JPRB) :: ZDECORR_LEN_M
905	REAL(KIND=JPRB) :: ZDECORR_LEN_M_1D(KLON)
906	REAL(KIND=JPRB) :: ZDECORR_LEN_M_2D(KLON,KLEV)
907
908	! Ratio of cloud overlap decorrelation length for cloud water
909	! inhomogeneities to that for cloud boundaries (typically 0.5)
910	!REAL(KIND=JPRB) :: ZDECORR_LEN_RATIO = 0.5_jprb
911
912	! The surface net longwave flux if the surface was a black body, used
913	! to compute the effective broadband surface emissivity
914	REAL(KIND=JPRB) :: ZBLACK_BODY_NET_LW(KIDIA:KFDIA)
915
916	! Layer mass in kg m-2
917	REAL(KIND=JPRB) :: ZLAYER_MASS(KIDIA:KFDIA,KLEV)
918
919	! Time integers
920	INTEGER :: ITIM
921
922	! Loop indices
923	INTEGER :: JLON, JLEV, JBAND, JB_ALBEDO, JAER
924
925	REAL(KIND=JPRB) :: ZHOOK_HANDLE
926
927	! AI ATTENTION traitement aerosols
928	INTEGER, PARAMETER :: NAERMACC = 1
929
930	logical :: loutput=.true.
931	logical :: lprint_input=.false.
932	logical :: lprint_config=.false.
933	logical, save :: debut_ecrad=.true.
934	!$OMP THREADPRIVATE(debut_ecrad)
935	integer, save :: itap_ecrad=0
936	!$OMP THREADPRIVATE(itap_ecrad)
937
938	REAL(KIND=JPRB) :: inv_cloud_effective_size(KLON,KLEV)
939	REAL(KIND=JPRB) :: inv_inhom_effective_size(KLON,KLEV)
940
941	integer :: irang
942
943
944	IF (LHOOK) CALL DR_HOOK('RADIATION_SCHEME',0,ZHOOK_HANDLE)
945
946	print*,'Entree radiation_scheme_s2, ok_3Deffect, namelist_file = ', &
947	ok_3Deffect, namelist_file
948	! A.I juillet 2023 :
949	! Initialisation dans radiation_setup au 1er passage dans Ecrad
950	!$OMP MASTER
951	!if (.not.ok_3Deffect) then
952	if (debut_ecrad) then
953	call SETUP_RADIATION_SCHEME(loutput,namelist_file,rad_config,driver_config)
954	debut_ecrad=.false.
955	endif
956	!else
957	! call SETUP_RADIATION_SCHEME(loutput,namelist_file,rad_config,driver_config)
958	!endif
959	!$OMP END MASTER
960	!$OMP BARRIER
961	! Fin partie initialisation et configuration
962
963	!AI print fichiers namelist utilise
964	!if (is_omp_root) then
965	! itap_ecrad=itap_ecrad+1
966	! print*,'Dans radiation_scheme itap_ecrad, mpi_rank, omp_rank, namelist_file : ', &
967	! itap_ecrad, mpi_rank, omp_rank, namelist_file
968	!else
969	! print*,'mpi_rank omp_rank, namelist_file :', mpi_rank, omp_rank, namelist_file
970	!endif
971
972	! AI 11 23 Allocates depplaces au debut
973	print,'******** ALLOCATES *****************************'
974	! AI ATTENTION
975	! Allocate memory in radiation objects
976	! emissivite avec une seule bande
977	CALL single_level%allocate(KLON, NSW, 1, &
978	& use_sw_albedo_direct=.TRUE.)
979	CALL thermodynamics%allocate(KLON, KLEV, use_h2o_sat=.true.)
980	CALL cloud%allocate(KLON, KLEV)
981	CALL aerosol%allocate(KLON, 1, KLEV, KAEROSOL)
982	CALL gas%allocate(KLON, KLEV)
983	CALL flux%allocate(rad_config, 1, KLON, KLEV)
984
985	print,'********** THERMO (input) **********************************'
986	! Set thermodynamic profiles: simply copy over the half-level
987	! pressure and temperature
988	! AI
989	! pressure_hl > paprs
990	! temperature_hl calculee dans radlsw de la meme facon que pour RRTM
991	thermodynamics%pressure_hl (KIDIA:KFDIA,:) = PPRESSURE_H (KIDIA:KFDIA,:)
992	thermodynamics%temperature_hl(KIDIA:KFDIA,:) = PTEMPERATURE_H(KIDIA:KFDIA,:)
993	!print*,'Compute saturation specific humidity'
994	! Compute saturation specific humidity, used to hydrate aerosols. The
995	! "2" for the last argument indicates that the routine is not being
996	! called from within the convection scheme.
997	!CALL SATUR(KIDIA, KFDIA, KLON, 1, KLEV, &
998	! & PPRESSURE, PTEMPERATURE, thermodynamics%h2o_sat_liq, 2)
999	! Alternative approximate version using temperature and pressure from
1000	! the thermodynamics structure
1001	!CALL thermodynamics%calc_saturation_wrt_liquid(KIDIA, KFDIA)
1002	!AI ATTENTION
1003	thermodynamics%h2o_sat_liq = PQSAT
1004
1005	print,'******* SINGLE LEVEL VARS ********************************'
1006	!AI ATTENTION
1007	! Set single-level fileds
1008	single_level%solar_irradiance = PSOLAR_IRRADIANCE
1009	single_level%cos_sza(KIDIA:KFDIA) = PMU0(KIDIA:KFDIA)
1010	single_level%skin_temperature(KIDIA:KFDIA) = PTEMPERATURE_SKIN(KIDIA:KFDIA)
1011	single_level%sw_albedo(KIDIA:KFDIA,:) = PALBEDO_DIF(KIDIA:KFDIA,:)
1012	single_level%sw_albedo_direct(KIDIA:KFDIA,:)=PALBEDO_DIR(KIDIA:KFDIA,:)
1013	single_level%lw_emissivity(KIDIA:KFDIA,1) = PEMIS(KIDIA:KFDIA)
1014	!single_level%lw_emissivity(KIDIA:KFDIA,2) = PEMIS_WINDOW(KIDIA:KFDIA)
1015
1016	! Create the relevant seed from date and time get the starting day
1017	! and number of minutes since start
1018	!IDAY = NDD(NINDAT)
1019	!cur_day
1020	!ITIM = NINT(NSTEP * YRRIP%TSTEP / 60.0_JPRB)
1021	!ITIM = NINT(TIME / 60.0_JPRB)
1022	!current_time
1023	!allocate(single_level%iseed(KIDIA:KFDIA))
1024	!DO JLON = KIDIA, KFDIA
1025	! This method gives a unique value for roughly every 1-km square
1026	! on the globe and every minute. ASIN(PGEMU)*60 gives rough
1027	! latitude in degrees, which we multiply by 100 to give a unique
1028	! value for roughly every km. PGELAM60100 gives a unique number
1029	! for roughly every km of longitude around the equator, which we
1030	! multiply by 180*100 so there is no overlap with the latitude
1031	! values. The result can be contained in a 32-byte integer (but
1032	! since random numbers are generated with the help of integer
1033	! overflow, it should not matter if the number did overflow).
1034	! single_level%iseed(JLON) = ITIM + IDAY &
1035	! & + NINT(PGELAM(JLON)*108000000.0_JPRB &
1036	! & + ASIN(PGEMU(JLON))*6000.0_JPRB)
1037	!ENDDO
1038	!AI Nov 23
1039	! Simple initialization of the seeds for the Monte Carlo scheme
1040	call single_level%init_seed_simple(kidia, kfdia)
1041
1042	print,'******* CLOUDS (allocate + input) *****************************************'
1043	!print*,'Appel Allocate clouds'
1044	! Set cloud fields
1045	cloud%q_liq(KIDIA:KFDIA,:) = PQ_LIQUID(KIDIA:KFDIA,:)
1046	cloud%q_ice(KIDIA:KFDIA,:) = PQ_ICE(KIDIA:KFDIA,:) + PQ_SNOW(KIDIA:KFDIA,:)
1047	cloud%fraction(KIDIA:KFDIA,:) = PCLOUD_FRAC(KIDIA:KFDIA,:)
1048	!!! ok AI ATTENTION a voir avec JL
1049	! Compute effective radi and convert to metres
1050	! AI. : on passe directement les champs de LMDZ
1051	cloud%re_liq(KIDIA:KFDIA,:) = ZRE_LIQUID_UM(KIDIA:KFDIA,:)
1052	cloud%re_ice(KIDIA:KFDIA,:) = ZRE_ICE_UM(KIDIA:KFDIA,:)
1053	! Get the cloud overlap decorrelation length (for cloud boundaries),
1054	! in km, according to the parameterization specified by NDECOLAT,
1055	! and insert into the "cloud" object. Also get the ratio of
1056	! decorrelation lengths for cloud water content inhomogeneities and
1057	! cloud boundaries, and set it in the "rad_config" object.
1058	! IFS :
1059	!CALL CLOUD_OVERLAP_DECORR_LEN(KIDIA, KFDIA, KLON, PGEMU, YRERAD%NDECOLAT, &
1060	! & ZDECORR_LEN_KM, PDECORR_LEN_RATIO=ZDECORR_LEN_RATIO)
1061	! AI valeur dans namelist
1062	! rad_config%cloud_inhom_decorr_scaling = ZDECORR_LEN_RATIO
1063	!AI ATTENTION meme valeur que dans offline
1064	! A mettre dans namelist
1065	CALL CALCUL_CLOUD_OVERLAP_DECORR_LEN &
1066	& (KIDIA, KFDIA, KLON, KLEV, &
1067	& driver_config, &
1068	& thermodynamics%pressure_hl , &
1069	& ZDECORR_LEN_M_2D)
1070
1071	if (driver_config%kdecolat.eq.0) then
1072	ZDECORR_LEN_M = ZDECORR_LEN_M_2D(1,1)
1073	DO JLON = KIDIA,KFDIA
1074	CALL cloud%set_overlap_param(thermodynamics, &
1075	& ZDECORR_LEN_M, &
1076	& istartcol=JLON, iendcol=JLON)
1077	ENDDO
1078	else if (driver_config%kdecolat.eq.1.or.driver_config%kdecolat.eq.2) then
1079	ZDECORR_LEN_M_1D = ZDECORR_LEN_M_2D(:,1)
1080	DO JLON = KIDIA,KFDIA
1081	CALL cloud%set_overlap_param(thermodynamics, &
1082	& ZDECORR_LEN_M_1D, &
1083	& istartcol=JLON, iendcol=JLON)
1084	ENDDO
1085	else if (driver_config%kdecolat.eq.3) then
1086	DO JLON = KIDIA,KFDIA
1087	CALL cloud%set_overlap_param_var2D(thermodynamics, &
1088	& ZDECORR_LEN_M_2D, KLEV, &
1089	& istartcol=JLON, iendcol=JLON)
1090	ENDDO
1091	endif
1092
1093	! IFS :
1094	! Cloud water content fractional standard deviation is configurable
1095	! from namelist NAERAD but must be globally constant. Before it was
1096	! hard coded at 1.0.
1097	!CALL cloud%create_fractional_std(KLON, KLEV, YRERAD%RCLOUD_FRAC_STD)
1098	! AI ATTENTION frac_std=0.75 meme valeur que dans la version offline
1099	CALL cloud%create_fractional_std(KLON, KLEV, driver_config%frac_std)
1100
1101	!if (ok_3Deffect) then
1102	! if (driver_config%ok_effective_size) then
1103	! call cloud%create_inv_cloud_effective_size_eta(klon, klev, &
1104	! & thermodynamics%pressure_hl, &
1105	! & driver_config%low_inv_effective_size, &
1106	! & driver_config%middle_inv_effective_size, &
1107	! & driver_config%high_inv_effective_size, 0.8_jprb, 0.45_jprb, &
1108	! & KIDIA, KFDIA)
1109	! else if (driver_config%ok_separation) then
1110	! call cloud%param_cloud_effective_separation_eta(klon, klev, &
1111	! & thermodynamics%pressure_hl, &
1112	! & driver_config%cloud_separation_scale_surface, &
1113	! & driver_config%cloud_separation_scale_toa, &
1114	! & driver_config%cloud_separation_scale_power, &
1115	! & driver_config%cloud_inhom_separation_factor, &
1116	! & KIDIA, KFDIA)
1117	! endif
1118	! else
1119	if (rad_config%i_solver_sw == ISolverSPARTACUS &
1120	& .or. rad_config%i_solver_lw == ISolverSPARTACUS) then
1121	! AI ! Read cloud properties needed by SPARTACUS
1122	if (driver_config%ok_effective_size) then
1123	call cloud%create_inv_cloud_effective_size_eta(klon, klev, &
1124	& thermodynamics%pressure_hl, &
1125	& driver_config%low_inv_effective_size, &
1126	& driver_config%middle_inv_effective_size, &
1127	& driver_config%high_inv_effective_size, 0.8_jprb, 0.45_jprb, &
1128	& KIDIA, KFDIA)
1129	else if (driver_config%ok_separation) then
1130	call cloud%param_cloud_effective_separation_eta(klon, klev, &
1131	& thermodynamics%pressure_hl, &
1132	& driver_config%cloud_separation_scale_surface, &
1133	& driver_config%cloud_separation_scale_toa, &
1134	& driver_config%cloud_separation_scale_power, &
1135	& driver_config%cloud_inhom_separation_factor, &
1136	& KIDIA, KFDIA)
1137	endif
1138	endif
1139	!endif
1140
1141	print,'***** AEROSOLS (input) ************************************'
1142	!IF (NAERMACC > 0) THEN
1143	!ELSE
1144	! CALL aerosol%allocate(KLON, 1, KLEV, 6) ! Tegen climatology
1145	!ENDIF
1146	! Compute the dry mass of each layer neglecting humidity effects, in
1147	! kg m-2, needed to scale some of the aerosol inputs
1148	! AI commente ATTENTION
1149	!CALL thermodynamics%get_layer_mass(ZLAYER_MASS)
1150
1151	! Copy over aerosol mass mixing ratio
1152	!IF (NAERMACC > 0) THEN
1153
1154	! MACC aerosol climatology - this is already in mass mixing ratio
1155	! units with the required array orientation so we can copy it over
1156	! directly
1157	aerosol%mixing_ratio(KIDIA:KFDIA,:,:) = PAEROSOL(KIDIA:KFDIA,:,:)
1158
1159	! Add the tropospheric and stratospheric backgrounds contained in the
1160	! old Tegen arrays - this is very ugly!
1161	! AI ATTENTION
1162	! IF (TROP_BG_AER_MASS_EXT > 0.0_JPRB) THEN
1163	! aerosol%mixing_ratio(KIDIA:KFDIA,:,ITYPE_TROP_BG_AER) &
1164	! & = aerosol%mixing_ratio(KIDIA:KFDIA,:,ITYPE_TROP_BG_AER) &
1165	! & + PAEROSOL_OLD(KIDIA:KFDIA,1,:) &
1166	! & / (ZLAYER_MASS * TROP_BG_AER_MASS_EXT)
1167	! ENDIF
1168	! IF (STRAT_BG_AER_MASS_EXT > 0.0_JPRB) THEN
1169	! aerosol%mixing_ratio(KIDIA:KFDIA,:,ITYPE_STRAT_BG_AER) &
1170	! & = aerosol%mixing_ratio(KIDIA:KFDIA,:,ITYPE_STRAT_BG_AER) &
1171	! & + PAEROSOL_OLD(KIDIA:KFDIA,6,:) &
1172	! & / (ZLAYER_MASS * STRAT_BG_AER_MASS_EXT)
1173	! ENDIF
1174
1175	!ELSE
1176
1177	! Tegen aerosol climatology - the array PAEROSOL_OLD contains the
1178	! 550-nm optical depth in each layer. The optics data file
1179	! aerosol_ifs_rrtm_tegen.nc does not contain mass extinction
1180	! coefficient, but a scaling factor that the 550-nm optical depth
1181	! should be multiplied by to obtain the optical depth in each
1182	! spectral band. Therefore, in order for the units to work out, we
1183	! need to divide by the layer mass (in kg m-2) to obtain the 550-nm
1184	! cross-section per unit mass of dry air (so in m2 kg-1). We also
1185	! need to permute the array.
1186	! DO JLEV = 1,KLEV
1187	! DO JAER = 1,6
1188	! aerosol%mixing_ratio(KIDIA:KFDIA,JLEV,JAER) &
1189	! & = PAEROSOL_OLD(KIDIA:KFDIA,JAER,JLEV) &
1190	! & / ZLAYER_MASS(KIDIA:KFDIA,JLEV)
1191	! ENDDO
1192	! ENDDO
1193	!ENDIF
1194
1195	print,'******* GAS (input) **********************************************'
1196	!print*,'Appel Allocate gas'
1197	! Convert ozone Pa*kg/kg to kg/kg
1198	! AI ATTENTION
1199	!DO JLEV = 1,KLEV
1200	! DO JLON = KIDIA,KFDIA
1201	! ZO3(JLON,JLEV) = PO3_DP(JLON,JLEV) &
1202	! & / (PPRESSURE_H(JLON,JLEV+1)-PPRESSURE_H(JLON,JLEV))
1203	! ENDDO
1204	!ENDDO
1205	! Insert gas mixing ratios
1206	!print*,'Insert gas mixing ratios'
1207	CALL gas%put(IH2O, IMassMixingRatio, PQ)
1208	CALL gas%put(IO3, IMassMixingRatio, PO3)
1209	CALL gas%put_well_mixed(ICO2, IMAssMixingRatio, PCO2)
1210	CALL gas%put_well_mixed(ICH4, IMassMixingRatio, PCH4)
1211	CALL gas%put_well_mixed(IN2O, IMassMixingRatio, PN2O)
1212	CALL gas%put_well_mixed(ICFC11, IMassMixingRatio, PCFC11)
1213	CALL gas%put_well_mixed(ICFC12, IMassMixingRatio, PCFC12)
1214	CALL gas%put_well_mixed(IHCFC22, IMassMixingRatio, PHCFC22)
1215	CALL gas%put_well_mixed(ICCL4, IMassMixingRatio, PCCL4)
1216	CALL gas%put_well_mixed(IO2, IMassMixingRatio, PO2)
1217	! Ensure the units of the gas mixing ratios are what is required by
1218	! the gas absorption model
1219	call set_gas_units(rad_config, gas)
1220
1221	! Call radiation scheme
1222	!print,' Appel radiation * namelist ** omp_rank **', &
1223	! omp_rank, namelist_file
1224	! if (rad_config%i_solver_sw == ISolverSPARTACUS) then
1225	! if (driver_config%ok_separation) then
1226	! print*,'Avant radiation, mpi_rank, omp_rank, size, chape inv_cloud = ',&
1227	! mpi_rank, omp_rank, &
1228	! shape(cloud%inv_cloud_effective_size), &
1229	! size(cloud%inv_cloud_effective_size)
1230	! do jlon=KIDIA, KFDIA
1231	! do jlev=1,klev
1232	! print*,' Avant radiation mpi_rank, omp_rank, jlon, jlev, &
1233	! & cloud%inv_cloud_effective_size =', mpi_rank, &
1234	! & omp_rank, jlon, jlev, &
1235	! & cloud%inv_cloud_effective_size(jlon,jlev)
1236	! enddo
1237	! enddo
1238	! cloud%inv_cloud_effective_size=inv_cloud_effective_size
1239	! cloud%inv_inhom_effective_size=inv_inhom_effective_size
1240	! endif
1241	! endif
1242	CALL radiation(KLON, KLEV, KIDIA, KFDIA, rad_config, &
1243	& single_level, thermodynamics, gas, cloud, aerosol, flux)
1244
1245	if (rad_config%use_aerosols) then
1246	if (rad_config%i_gas_model_sw == IGasModelIFSRRTMG .or. &
1247	& rad_config%i_gas_model_lw == IGasModelIFSRRTMG) then
1248	CALL aeropt_5wv_ecrad(kidia, kfdia, 1, klev, &
1249	rad_config,thermodynamics,aerosol)
1250	endif
1251	if (flag_aerosol_strat.eq.2) then
1252	CALL readaerosolstrato_ecrad(rad_config, debut, ok_volcan)
1253	endif
1254	endif
1255
1256	print,'******** Sortie flux **************'
1257	! Cloud cover
1258	ecrad_cloud_cover_sw = flux%cloud_cover_sw
1259	! Compute required output fluxes
1260	! DN and UP flux
1261	PFLUX_SW_DN(KIDIA:KFDIA,:) = flux%sw_dn(KIDIA:KFDIA,:)
1262	PFLUX_SW_UP(KIDIA:KFDIA,:) = flux%sw_up(KIDIA:KFDIA,:)
1263	PFLUX_LW_DN(KIDIA:KFDIA,:) = flux%lw_dn(KIDIA:KFDIA,:)
1264	PFLUX_LW_UP(KIDIA:KFDIA,:) = flux%lw_up(KIDIA:KFDIA,:)
1265	PFLUX_SW_DN_CLEAR(KIDIA:KFDIA,:) = flux%sw_dn_clear(KIDIA:KFDIA,:)
1266	PFLUX_SW_UP_CLEAR(KIDIA:KFDIA,:) = flux%sw_up_clear(KIDIA:KFDIA,:)
1267	PFLUX_LW_DN_CLEAR(KIDIA:KFDIA,:) = flux%lw_dn_clear(KIDIA:KFDIA,:)
1268	PFLUX_LW_UP_CLEAR(KIDIA:KFDIA,:) = flux%lw_up_clear(KIDIA:KFDIA,:)
1269	! First the net fluxes
1270	PFLUX_SW(KIDIA:KFDIA,:) = flux%sw_dn(KIDIA:KFDIA,:) - flux%sw_up(KIDIA:KFDIA,:)
1271	PFLUX_LW(KIDIA:KFDIA,:) = flux%lw_dn(KIDIA:KFDIA,:) - flux%lw_up(KIDIA:KFDIA,:)
1272	PFLUX_SW_CLEAR(KIDIA:KFDIA,:) &
1273	& = flux%sw_dn_clear(KIDIA:KFDIA,:) - flux%sw_up_clear(KIDIA:KFDIA,:)
1274	PFLUX_LW_CLEAR(KIDIA:KFDIA,:) &
1275	& = flux%lw_dn_clear(KIDIA:KFDIA,:) - flux%lw_up_clear(KIDIA:KFDIA,:)
1276	! Now the surface fluxes
1277	!PFLUX_SW_DN_SURF(KIDIA:KFDIA) = flux%sw_dn(KIDIA:KFDIA,KLEV+1)
1278	!PFLUX_LW_DN_SURF(KIDIA:KFDIA) = flux%lw_dn(KIDIA:KFDIA,KLEV+1)
1279	!PFLUX_SW_UP_SURF(KIDIA:KFDIA) = flux%sw_up(KIDIA:KFDIA,KLEV+1)
1280	!PFLUX_LW_UP_SURF(KIDIA:KFDIA) = flux%lw_up(KIDIA:KFDIA,KLEV+1)
1281	!PFLUX_SW_DN_CLEAR_SURF(KIDIA:KFDIA) = flux%sw_dn_clear(KIDIA:KFDIA,KLEV+1)
1282	!PFLUX_LW_DN_CLEAR_SURF(KIDIA:KFDIA) = flux%lw_dn_clear(KIDIA:KFDIA,KLEV+1)
1283	!PFLUX_SW_UP_CLEAR_SURF(KIDIA:KFDIA) = flux%sw_up_clear(KIDIA:KFDIA,KLEV+1)
1284	!PFLUX_LW_UP_CLEAR_SURF(KIDIA:KFDIA) = flux%lw_up_clear(KIDIA:KFDIA,KLEV+1)
1285	PFLUX_DIR(KIDIA:KFDIA) = flux%sw_dn_direct(KIDIA:KFDIA,KLEV+1)
1286	PFLUX_DIR_CLEAR(KIDIA:KFDIA) = flux%sw_dn_direct_clear(KIDIA:KFDIA,KLEV+1)
1287	PFLUX_DIR_INTO_SUN(KIDIA:KFDIA) = 0.0_JPRB
1288	WHERE (PMU0(KIDIA:KFDIA) > EPSILON(1.0_JPRB))
1289	PFLUX_DIR_INTO_SUN(KIDIA:KFDIA) = PFLUX_DIR(KIDIA:KFDIA) / PMU0(KIDIA:KFDIA)
1290	END WHERE
1291	! Top-of-atmosphere downwelling flux
1292	!PFLUX_SW_DN_TOA(KIDIA:KFDIA) = flux%sw_dn(KIDIA:KFDIA,1)
1293	!PFLUX_SW_UP_TOA(KIDIA:KFDIA) = flux%sw_up(KIDIA:KFDIA,1)
1294	!PFLUX_LW_DN_TOA(KIDIA:KFDIA) = flux%lw_dn(KIDIA:KFDIA,1)
1295	!PFLUX_LW_UP_TOA(KIDIA:KFDIA) = flux%lw_up(KIDIA:KFDIA,1)
1296	!AI ATTENTION
1297	if (0.eq.1) then
1298	PFLUX_UV (KIDIA:KFDIA) = 0.0_JPRB
1299	DO JBAND = 1,NWEIGHT_UV
1300	PFLUX_UV(KIDIA:KFDIA) = PFLUX_UV(KIDIA:KFDIA) + WEIGHT_UV(JBAND) &
1301	& * flux%sw_dn_surf_band(IBAND_UV(JBAND),KIDIA:KFDIA)
1302	ENDDO
1303	! Compute photosynthetically active radiation similarly
1304	PFLUX_PAR (KIDIA:KFDIA) = 0.0_JPRB
1305	PFLUX_PAR_CLEAR(KIDIA:KFDIA) = 0.0_JPRB
1306	DO JBAND = 1,NWEIGHT_PAR
1307	PFLUX_PAR(KIDIA:KFDIA) = PFLUX_PAR(KIDIA:KFDIA) + WEIGHT_PAR(JBAND) &
1308	& * flux%sw_dn_surf_band(IBAND_PAR(JBAND),KIDIA:KFDIA)
1309	PFLUX_PAR_CLEAR(KIDIA:KFDIA) = PFLUX_PAR_CLEAR(KIDIA:KFDIA) &
1310	& + WEIGHT_PAR(JBAND) &
1311	& * flux%sw_dn_surf_clear_band(IBAND_PAR(JBAND),KIDIA:KFDIA)
1312	ENDDO
1313	endif
1314	! Compute effective broadband emissivity
1315	ZBLACK_BODY_NET_LW = flux%lw_dn(KIDIA:KFDIA,KLEV+1) &
1316	& - RSIGMAPTEMPERATURE_SKIN(KIDIA:KFDIA)*4
1317	PEMIS_OUT(KIDIA:KFDIA) = PEMIS(KIDIA:KFDIA)
1318	WHERE (ABS(ZBLACK_BODY_NET_LW) > 1.0E-5)
1319	PEMIS_OUT(KIDIA:KFDIA) = PFLUX_LW(KIDIA:KFDIA,KLEV+1) / ZBLACK_BODY_NET_LW
1320	END WHERE
1321	! Copy longwave derivatives
1322	! AI ATTENTION
1323	!IF (YRERAD%LAPPROXLWUPDATE) THEN
1324	IF (rad_config%do_lw_derivatives) THEN
1325	PLWDERIVATIVE(KIDIA:KFDIA,:) = flux%lw_derivatives(KIDIA:KFDIA,:)
1326	END IF
1327	! Store the shortwave downwelling fluxes in each albedo band
1328	!AI ATTENTION
1329	!IF (YRERAD%LAPPROXSWUPDATE) THEN
1330	if (0.eq.1) then
1331	IF (rad_config%do_surface_sw_spectral_flux) THEN
1332	PSWDIFFUSEBAND(KIDIA:KFDIA,:) = 0.0_JPRB
1333	PSWDIRECTBAND (KIDIA:KFDIA,:) = 0.0_JPRB
1334	DO JBAND = 1,rad_config%n_bands_sw
1335	JB_ALBEDO = rad_config%i_albedo_from_band_sw(JBAND)
1336	DO JLON = KIDIA,KFDIA
1337	PSWDIFFUSEBAND(JLON,JB_ALBEDO) = PSWDIFFUSEBAND(JLON,JB_ALBEDO) &
1338	& + flux%sw_dn_surf_band(JBAND,JLON) &
1339	& - flux%sw_dn_direct_surf_band(JBAND,JLON)
1340	PSWDIRECTBAND(JLON,JB_ALBEDO) = PSWDIRECTBAND(JLON,JB_ALBEDO) &
1341	& + flux%sw_dn_direct_surf_band(JBAND,JLON)
1342	ENDDO
1343	ENDDO
1344	ENDIF
1345	endif
1346
1347	print,'******* DEALLOCATIONS **********************'
1348	CALL single_level%deallocate
1349	CALL thermodynamics%deallocate
1350	CALL gas%deallocate
1351	CALL cloud%deallocate
1352	CALL aerosol%deallocate
1353	CALL flux%deallocate
1354
1355	IF (LHOOK) CALL DR_HOOK('RADIATION_SCHEME',1,ZHOOK_HANDLE)
1356
1357	END SUBROUTINE RADIATION_SCHEME_S2
1358
1359	end module interface_lmdz_ecrad

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format