source: LMDZ6/trunk/libf/phylmd/ecrad.v1.5.1/radiation_general_cloud_optics_data.F90 @ 5444

! radiation_general_cloud_optics_data.F90 - Type to store generalized cloud optical properties
!
! (C) Copyright 2019- ECMWF.
!
! This software is licensed under the terms of the Apache Licence Version 2.0
! which can be obtained at http://www.apache.org/licenses/LICENSE-2.0.
!
! In applying this licence, ECMWF does not waive the privileges and immunities
! granted to it by virtue of its status as an intergovernmental organisation
! nor does it submit to any jurisdiction.
!
! Author:  Robin Hogan
! Email:   r.j.hogan@ecmwf.int
! License: see the COPYING file for details
!

module radiation_general_cloud_optics_data

  use parkind1, only : jprb

  implicit none

  public

  !---------------------------------------------------------------------
  ! This type holds the configuration information to compute optical
  ! properties for a particular type of cloud or hydrometeor in one of
  ! the shortwave or longwave
  type general_cloud_optics_type
    ! Band-specific (or g-point-specific) values as a look-up table
    ! versus effective radius dimensioned (nband,n_effective_radius)
    
    ! Extinction coefficient per unit mass (m2 kg-1)
    real(jprb), allocatable, dimension(:,:) :: &
         &  mass_ext
    
    ! Single-scattering albedo and asymmetry factor (dimensionless)
    real(jprb), allocatable, dimension(:,:) :: &
         &  ssa, asymmetry

    ! Number of effective radius coefficients, start value and
    ! interval in look-up table
    integer    :: n_effective_radius = 0
    real(jprb) :: effective_radius_0, d_effective_radius

    ! Name of cloud/precip type (e.g. "liquid", "ice", "rain", "snow")
    ! and the name of the optics scheme.  These two are used to
    ! generate the name of the data file from which the coefficients
    ! are read.
    character(len=511) :: type_name, scheme_name
    
    ! Do we use bands or g-points?
    logical :: use_bands = .false.

   contains
     procedure :: setup => setup_general_cloud_optics
     procedure :: add_optical_properties

  end type general_cloud_optics_type

contains

  ! Provides elemental function "delta_eddington"
#include "radiation_delta_eddington.h"

  !---------------------------------------------------------------------
  ! Setup cloud optics coefficients by reading them from a file
  subroutine setup_general_cloud_optics(this, file_name, specdef, &
       &                                use_bands, use_thick_averaging, &
       &                                weighting_temperature, &
       &                                iverbose)

    use yomhook,                       only : lhook, dr_hook
    use easy_netcdf,                   only : netcdf_file
    use radiation_spectral_definition, only : spectral_definition_type
    use radiation_io,                  only : nulout, nulerr, radiation_abort

    class(general_cloud_optics_type), intent(inout)    :: this
    character(len=*), intent(in)               :: file_name
    type(spectral_definition_type), intent(in) :: specdef
    logical, intent(in), optional              :: use_bands, use_thick_averaging
    real(jprb), intent(in), optional           :: weighting_temperature ! K
    integer, intent(in), optional              :: iverbose
    
    ! Spectral properties read from file, dimensioned (wavenumber,
    ! n_effective_radius)
    real(jprb), dimension(:,:), allocatable :: mass_ext, & ! m2 kg-1
         &                                     ssa, asymmetry

    ! Reflectance of an infinitely thick cloud, needed for thick
    ! averaging
    real(jprb), dimension(:,:), allocatable :: ref_inf

    ! Coordinate variables from file
    real(jprb), dimension(:), allocatable :: wavenumber       ! cm-1
    real(jprb), dimension(:), allocatable :: effective_radius ! m

    ! Matrix mapping optical properties in the file to values per
    ! g-point or band, such that in the thin-averaging case,
    ! this%mass_ext=matmul(mapping,file%mass_ext), so mapping is
    ! dimensioned (ngpoint,nwav)
    real(jprb), dimension(:,:), allocatable :: mapping

    ! The NetCDF file containing the coefficients
    type(netcdf_file)  :: file

    real(jprb) :: diff_spread
    integer    :: iverb
    integer    :: nre  ! Number of effective radii
    integer    :: nwav ! Number of wavenumbers describing cloud

    logical    :: use_bands_local, use_thick_averaging_local

    real(jprb) :: hook_handle

    if (lhook) call dr_hook('radiation_general_cloud_optics_data:setup',0,hook_handle)

    ! Set local values of optional inputs
    if (present(iverbose)) then
      iverb = iverbose
    else
      iverb = 2
    end if

    if (present(use_bands)) then
      use_bands_local = use_bands
    else
      use_bands_local = .false.
    end if

    if (present(use_thick_averaging)) then
      use_thick_averaging_local = use_thick_averaging
    else
      use_thick_averaging_local = .false.
    end if

    ! Open the scattering file and configure the way it is read
    call file%open(trim(file_name), iverbose=iverb)
    !call file%transpose_matrices()

    ! Read coordinate variables
    call file%get('wavenumber', wavenumber)
    call file%get('effective_radius', effective_radius)

    ! Read the band-specific coefficients
    call file%get('mass_extinction_coefficient', mass_ext)
    call file%get('single_scattering_albedo', ssa)
    call file%get('asymmetry_factor', asymmetry)

    ! Close scattering file
    call file%close()

    ! Check effective radius is evenly spaced
    nre = size(effective_radius)
    ! Fractional range of differences, should be near zero for evenly
    ! spaced data
    diff_spread = (maxval(effective_radius(2:nre)-effective_radius(1:nre-1))  &
         &        -minval(effective_radius(2:nre)-effective_radius(1:nre-1))) &
         &      /  minval(abs(effective_radius(2:nre)-effective_radius(1:nre-1)))
    if (diff_spread > 0.01_jprb) then
      write(nulerr, '(a,a,a)') '*** Error: effective_radius in ', &
           &  trim(file_name), ', is not evenly spaced to 1%'
      call radiation_abort('Radiation configuration error')
    end if

    ! Set up effective radius coordinate variable
    this%n_effective_radius = nre
    this%effective_radius_0 = effective_radius(1)
    this%d_effective_radius = effective_radius(2) - effective_radius(1)

    ! Set up weighting
    if (.not. present(weighting_temperature)) then
      write(nulerr, '(a)') '*** Error: weighting_temperature not provided'
      call radiation_abort('Radiation configuration error')
    end if

    nwav = size(wavenumber)

    ! Define the mapping matrix
    call specdef%calc_mapping(weighting_temperature, &
         &                    wavenumber, mapping, use_bands=use_bands)

    ! Thick averaging should be performed on delta-Eddington scaled
    ! quantities (it makes no difference to thin averaging)
    call delta_eddington(mass_ext, ssa, asymmetry)


    ! Thin averaging
   ! AI juillet 2023 
    allocate(this%mass_ext(nre,nwav))
    this%mass_ext  = matmul(mapping, mass_ext)
    this%ssa       = matmul(mapping, mass_ext*ssa) / this%mass_ext
    this%asymmetry = matmul(mapping, mass_ext*ssa*asymmetry) / (this%mass_ext*this%ssa)
    
    if (use_thick_averaging_local) then
      ! Thick averaging as described by Edwards and Slingo (1996),
      ! modifying only the single-scattering albedo
      allocate(ref_inf(nwav, nre))

      ! Eqs. 18 and 17 of Edwards & Slingo (1996)
      ref_inf = sqrt((1.0_jprb - ssa) / (1.0_jprb - ssa*asymmetry))
      ref_inf = (1.0_jprb - ref_inf) / (1.0_jprb + ref_inf)
      ! Here the left-hand side is actually the averaged ref_inf
      this%ssa = matmul(mapping, ref_inf)
      ! Eq. 19 of Edwards and Slingo (1996)
      this%ssa = 4.0_jprb * this%ssa / ((1.0_jprb + this%ssa)**2 &
           &  - this%asymmetry * (1.0_jprb - this%ssa)**2)

      deallocate(ref_inf)
    end if

    deallocate(mapping)

    ! Revert back to unscaled quantities
    call revert_delta_eddington(this%mass_ext, this%ssa, this%asymmetry)

    if (iverb >= 2) then
      write(nulout,'(a,a)') '  File: ', trim(file_name)
      write(nulout,'(a,f7.1,a)') '  Weighting temperature: ', weighting_temperature, ' K'
      if (use_thick_averaging_local) then
        write(nulout,'(a)') '  SSA averaging: optically thick limit'
      else
        write(nulout,'(a)') '  SSA averaging: optically thin limit'
      end if
      if (use_bands_local) then
        write(nulout,'(a,i0,a)') '  Spectral discretization: ', specdef%nband, ' bands'
      else
        write(nulout,'(a,i0,a)') '  Spectral discretization: ', specdef%ng, ' g-points'
      end if
      write(nulout,'(a,i0,a,f6.1,a,f6.1,a)') '  Effective radius look-up: ', nre, ' points in range ', &
           &  effective_radius(1)*1.0e6_jprb, '-', effective_radius(nre)*1.0e6_jprb, ' um'
      write(nulout,'(a,i0,a,i0,a)') '  Wavenumber range: ', int(specdef%min_wavenumber()), '-', &
           &  int(specdef%max_wavenumber()), ' cm-1'
    end if

    if (lhook) call dr_hook('radiation_general_cloud_optics_data:setup',1,hook_handle)

  end subroutine setup_general_cloud_optics


  !---------------------------------------------------------------------
  ! Add the optical properties of a particular cloud type to the
  ! accumulated optical properties of all cloud types
  subroutine add_optical_properties(this, ng, nlev, ncol, &
       &                            cloud_fraction, &
       &                            water_path, effective_radius, &
       &                            od, scat_od, scat_asymmetry)

    use yomhook, only : lhook, dr_hook

    class(general_cloud_optics_type), intent(in) :: this

    ! Number of g points, levels and columns
    integer, intent(in) :: ng, nlev, ncol

    ! Properties of present cloud type, dimensioned (ncol,nlev)
    real(jprb), intent(in) :: cloud_fraction(:,:)
    real(jprb), intent(in) :: water_path(:,:)       ! kg m-2
    real(jprb), intent(in) :: effective_radius(:,:) ! m

    ! Optical properties which are additive per cloud type,
    ! dimensioned (ng,nlev,ncol)
    real(jprb), intent(inout), dimension(ng,nlev,ncol) &
         &  :: od             ! Optical depth of layer
    real(jprb), intent(inout), dimension(ng,nlev,ncol), optional &
         &  :: scat_od, &     ! Scattering optical depth of layer
         &     scat_asymmetry ! Scattering optical depth x asymmetry factor

    real(jprb) :: od_local(ng)

    real(jprb) :: re_index, weight1, weight2
    integer :: ire

    integer :: jcol, jlev

    real(jprb) :: hook_handle

    if (lhook) call dr_hook('radiation_general_cloud_optics_data:add_optical_properties',0,hook_handle)

    if (present(scat_od)) then
      do jcol = 1,ncol
        do jlev = 1,nlev
          if (cloud_fraction(jcol, jlev) > 0.0_jprb) then
            re_index = max(1.0_jprb, min(1.0_jprb + (effective_radius(jcol,jlev)-this%effective_radius_0) &
                 &              / this%d_effective_radius, this%n_effective_radius-0.0001_jprb))
            ire = int(re_index)
            weight2 = re_index - ire
            weight1 = 1.0_jprb - weight2
            od_local = water_path(jcol, jlev) * (weight1*this%mass_ext(:,ire) &
                 &                              +weight2*this%mass_ext(:,ire+1))
            od(:,jlev,jcol) = od(:,jlev,jcol) + od_local
            od_local = od_local * (weight1*this%ssa(:,ire) &
                 &                +weight2*this%ssa(:,ire+1))
            scat_od(:,jlev,jcol) = scat_od(:,jlev,jcol) + od_local
            scat_asymmetry(:,jlev,jcol) = scat_asymmetry(:,jlev,jcol) &
                 & + od_local * (weight1*this%asymmetry(:,ire) &
                 &              +weight2*this%asymmetry(:,ire+1))
          end if
        end do
      end do
    else
      ! No scattering: return the absorption optical depth
      do jcol = 1,ncol
        do jlev = 1,nlev
          if (water_path(jcol, jlev) > 0.0_jprb) then
            re_index = max(1.0, min(1.0_jprb + (effective_radius(jcol,jlev)-this%effective_radius_0) &
                 &              / this%d_effective_radius, this%n_effective_radius-0.0001_jprb))
            ire = int(re_index)
            weight2 = re_index - ire
            weight1 = 1.0_jprb - weight2
            od(:,jlev,jcol) = od(:,jlev,jcol) &
                 &  + water_path(jcol, jlev) * (weight1*this%mass_ext(:,ire) &
                 &                             +weight2*this%mass_ext(:,ire+1)) &
                 &  * (1.0_jprb - (weight1*this%ssa(:,ire)+weight2*this%ssa(:,ire+1)))
          end if
        end do
      end do
    end if

    if (lhook) call dr_hook('radiation_general_cloud_optics_data:add_optical_properties',1,hook_handle)

  end subroutine add_optical_properties


  !---------------------------------------------------------------------
  ! Return the Planck function (in W m-2 (cm-1)-1) for a given
  ! wavenumber (cm-1) and temperature (K), ensuring double precision
  ! for internal calculation
  elemental function calc_planck_function_wavenumber(wavenumber, temperature)

    use parkind1,            only : jprb, jprd
    use radiation_constants, only : SpeedOfLight, BoltzmannConstant, PlanckConstant

    real(jprb), intent(in) :: wavenumber  ! cm-1
    real(jprb), intent(in) :: temperature ! K
    real(jprb) :: calc_planck_function_wavenumber

    real(jprd) :: freq ! Hz
    real(jprd) :: planck_fn_freq ! W m-2 Hz-1

    freq = 100.0_jprd * real(SpeedOfLight,jprd) * real(wavenumber,jprd)
    planck_fn_freq = 2.0_jprd * real(PlanckConstant,jprd) * freq**3 &
         &  / (real(SpeedOfLight,jprd)**2 * (exp(real(PlanckConstant,jprd)*freq &
         &     /(real(BoltzmannConstant,jprd)*real(temperature,jprd))) - 1.0_jprd))
    calc_planck_function_wavenumber = real(planck_fn_freq * 100.0_jprd * real(SpeedOfLight,jprd), jprb)

  end function calc_planck_function_wavenumber

end module radiation_general_cloud_optics_data