source: LMDZ6/trunk/libf/phylmd/ecrad.v1.5.1/radiation_ecckd.F90 @ 5450

Last change on this file since 5450 was 4677, checked in by idelkadi, 16 months ago

Implementation in the LMDZ code of the double call of the ECRAD radiative transfer code to estimate the 3D radiative effect of clouds.

  • This double call of Ecrad is controlled by the ok_3Deffect logic key.
  • If this key is enabled, 2 files of parameter configuration "namelists" for ECRAD are required at runtime: namelist_ecrad and namelist_ecrad_s2.
  • If this key is deactivated, the configuration and initialization part (reading namelist and netcdf files) is performed only once during simulation (1st call to ECRAD). Otherwise, configuration and initialization are performed each time Ecrad is called.
File size: 20.4 KB
Line 
1! radiation_ecckd.F90 - ecCKD generalized gas optics model
2!
3! (C) Copyright 2020- ECMWF.
4!
5! This software is licensed under the terms of the Apache Licence Version 2.0
6! which can be obtained at http://www.apache.org/licenses/LICENSE-2.0.
7!
8! In applying this licence, ECMWF does not waive the privileges and immunities
9! granted to it by virtue of its status as an intergovernmental organisation
10! nor does it submit to any jurisdiction.
11!
12! Author:  Robin Hogan
13! Email:   r.j.hogan@ecmwf.int
14! License: see the COPYING file for details
15!
16
17module radiation_ecckd
18
19  use parkind1, only : jprb
20  use radiation_gas_constants
21  use radiation_ecckd_gas
22  use radiation_spectral_definition, only : spectral_definition_type
23
24  implicit none
25
26  public
27
28  !---------------------------------------------------------------------
29  ! This derived type contains all the data needed to describe a
30  ! correlated k-distribution gas optics model created using the ecCKD
31  ! tool
32  type ckd_model_type
33
34    ! Gas information
35
36    ! Number of gases
37    integer :: ngas = 0
38    ! Array of individual-gas data objects
39    type(ckd_gas_type), allocatable :: single_gas(:)
40    ! Mapping from the "gas codes" in the radiation_gas_constants
41    ! module to an index to the single_gas array, where zero means gas
42    ! not present (or part of a composite gas)
43    integer :: i_gas_mapping(0:NMaxGases)
44
45    ! Coordinates of main look-up table for absorption coeffts
46
47    ! Number of pressure and temperature points
48    integer :: npress = 0
49    integer :: ntemp  = 0
50    ! Natural logarithm of first (lowest) pressure (Pa) and increment
51    real(jprb) :: log_pressure1, d_log_pressure
52    ! First temperature profile (K), dimensioned (npress)
53    real(jprb), allocatable :: temperature1(:)
54    ! Temperature increment (K)
55    real(jprb) :: d_temperature
56
57    ! Look-up table for Planck function
58
59    ! Number of entries
60    integer :: nplanck = 0
61    ! Temperature of first element of look-up table and increment (K)
62    real(jprb), allocatable :: temperature1_planck
63    real(jprb), allocatable :: d_temperature_planck
64    ! Planck function (black body flux into a horizontal plane) in W
65    ! m-2, dimensioned (ng,nplanck)
66    real(jprb), allocatable :: planck_function(:,:)
67
68    ! Normalized solar irradiance in each g point dimensioned (ng)
69    real(jprb), allocatable :: norm_solar_irradiance(:)
70
71    ! Rayleigh molar scattering coefficient in m2 mol-1 in each g
72    ! point
73    real(jprb), allocatable :: rayleigh_molar_scat(:)
74
75    ! ! Spectral mapping of g points
76
77    ! ! Number of wavenumber intervals
78    ! integer :: nwav = 0
79
80    ! Number of k terms / g points
81    integer :: ng   = 0
82
83    ! Spectral definition describing bands and g points
84    type(spectral_definition_type) :: spectral_def
85
86    ! Shortwave: true, longwave: false
87    logical :: is_sw
88
89  contains
90
91    procedure :: read => read_ckd_model
92    procedure :: calc_optical_depth => calc_optical_depth_ckd_model
93    procedure :: print => print_ckd_model
94    procedure :: calc_planck_function
95    procedure :: calc_incoming_sw
96!    procedure :: deallocate => deallocate_ckd_model
97
98  end type ckd_model_type
99
100
101contains
102
103  !---------------------------------------------------------------------
104  ! Read a complete ecCKD gas optics model from a NetCDF file
105  ! "filename"
106  subroutine read_ckd_model(this, filename, iverbose)
107
108    use easy_netcdf,  only : netcdf_file
109    !use radiation_io, only : nulerr, radiation_abort
110    use yomhook,      only : lhook, dr_hook
111
112    class(ckd_model_type), intent(inout) :: this
113    character(len=*),      intent(in)    :: filename
114    integer, optional,     intent(in)    :: iverbose
115
116    type(netcdf_file) :: file
117
118    real(jprb), allocatable :: pressure_lut(:)
119    real(jprb), allocatable :: temperature_full(:,:)
120    real(jprb), allocatable :: temperature_planck(:)
121
122    character(len=512) :: constituent_id
123
124    integer :: iverbose_local
125
126    ! Loop counters
127    integer :: jgas, jjgas
128
129    integer :: istart, inext, nchar, i_gas_code
130
131    real(jprb)         :: hook_handle
132
133    if (lhook) call dr_hook('radiation_ecckd:read_ckd_model',0,hook_handle)
134
135    if (present(iverbose)) then
136      iverbose_local = iverbose
137    else
138      iverbose_local = 3
139    end if
140
141    call file%open(trim(filename), iverbose=iverbose_local)
142
143    ! Read temperature and pressure coordinate variables
144    call file%get('pressure', pressure_lut)
145    this%log_pressure1 = log(pressure_lut(1))
146    this%npress = size(pressure_lut)
147    this%d_log_pressure = log(pressure_lut(2)) - this%log_pressure1
148    call file%get('temperature', temperature_full)
149    if (allocated(this%temperature1)) deallocate(this%temperature1)
150    allocate(this%temperature1(this%npress));
151    this%temperature1 = temperature_full(:,1)
152    this%d_temperature = temperature_full(1,2)-temperature_full(1,1)
153    this%ntemp = size(temperature_full,2)
154    deallocate(temperature_full)
155   
156    ! Read Planck function, or solar irradiance and Rayleigh
157    ! scattering coefficient
158    if (file%exists('solar_irradiance')) then
159      this%is_sw = .true.
160      call file%get('solar_irradiance', this%norm_solar_irradiance)
161      this%norm_solar_irradiance = this%norm_solar_irradiance &
162           &  / sum(this%norm_solar_irradiance)
163      call file%get('rayleigh_molar_scattering_coeff', &
164           &  this%rayleigh_molar_scat)
165    else
166      this%is_sw = .false.
167      call file%get('temperature_planck', temperature_planck)
168      this%nplanck = size(temperature_planck)
169      this%temperature1_planck = temperature_planck(1)
170      this%d_temperature_planck = temperature_planck(2) - temperature_planck(1)
171      deallocate(temperature_planck)
172      call file%get('planck_function', this%planck_function)
173    end if
174
175    ! Read the spectral definition information into a separate
176    ! derived type
177    call this%spectral_def%read(file);
178    this%ng = this%spectral_def%ng
179
180    ! Read gases
181    call file%get('n_gases', this%ngas)
182    if (allocated(this%single_gas)) deallocate(this%single_gas) 
183    allocate(this%single_gas(this%ngas))
184    call file%get_global_attribute('constituent_id', constituent_id)
185    nchar = len(trim(constituent_id))
186    istart = 1
187    this%i_gas_mapping = 0
188    do jgas = 1, this%ngas
189      if (jgas < this%ngas) then
190        inext = istart + scan(constituent_id(istart:nchar), ' ')
191      else
192        inext = nchar+2
193      end if
194      ! Find gas code
195      i_gas_code = 0
196      do jjgas = 1, NMaxGases
197        if (constituent_id(istart:inext-2) == trim(GasLowerCaseName(jjgas))) then
198          i_gas_code = jjgas
199          exit
200        end if
201      end do
202      ! if (i_gas_code == 0) then
203      !   write(nulerr,'(a,a,a)') '*** Error: Gas "', constituent_id(istart:inext-2), &
204      !        & '" not understood'
205      !   call radiation_abort('Radiation configuration error')
206      ! end if
207      this%i_gas_mapping(i_gas_code) = jgas;
208      call this%single_gas(jgas)%read(file, constituent_id(istart:inext-2), i_gas_code)
209      istart = inext
210    end do
211   
212    if (lhook) call dr_hook('radiation_ecckd:read_ckd_model',1,hook_handle)
213
214  end subroutine read_ckd_model
215
216  !---------------------------------------------------------------------
217  ! Print a description of the correlated k-distribution model to the
218  ! "nulout" unit
219  subroutine print_ckd_model(this)
220
221    use radiation_io, only : nulout
222    use radiation_gas_constants
223
224    class(ckd_model_type), intent(in)  :: this
225
226    integer :: jgas
227   
228    if (this%is_sw) then
229      write(nulout,'(a)',advance='no') 'ecCKD shortwave gas optics model: '
230    else
231      write(nulout,'(a)',advance='no') 'ecCKD longwave gas optics model: '
232    end if
233
234    write(nulout,'(i0,a,i0,a,i0,a,i0,a)') &
235         &  nint(this%spectral_def%wavenumber1(1)), '-', &
236         &  nint(this%spectral_def%wavenumber2(size(this%spectral_def%wavenumber2))), &
237         &  ' cm-1, ', this%ng, ' g-points in ', this%spectral_def%nband, ' bands'
238    write(nulout,'(a,i0,a,i0,a,i0,a)') '  Look-up table sizes: ', this%npress, ' pressures, ', &
239         &  this%ntemp, ' temperatures, ', this%nplanck, ' planck-function entries'
240    write(nulout, '(a)') '  Gases:'
241    do jgas = 1,this%ngas
242      if (this%single_gas(jgas)%i_gas_code > 0) then
243        write(nulout, '(a,a,a)', advance='no') '    ', &
244             &  trim(GasName(this%single_gas(jgas)%i_gas_code)), ': '
245      else
246        write(nulout, '(a)', advance='no') '    Composite of well-mixed background gases: '
247      end if
248      select case (this%single_gas(jgas)%i_conc_dependence)
249        case (IConcDependenceNone)
250          write(nulout, '(a)') 'no concentration dependence'
251        case (IConcDependenceLinear)
252          write(nulout, '(a)') 'linear concentration dependence'
253        case (IConcDependenceRelativeLinear)
254          write(nulout, '(a,e14.6)') 'linear concentration dependence relative to a mole fraction of ', &
255               &  this%single_gas(jgas)%reference_mole_frac
256        case (IConcDependenceLUT)
257          write(nulout, '(a,i0,a,e14.6,a,e13.6)') 'look-up table with ', this%single_gas(jgas)%n_mole_frac, &
258               &  ' log-spaced mole fractions in range ', exp(this%single_gas(jgas)%log_mole_frac1), &
259               &  ' to ', exp(this%single_gas(jgas)%log_mole_frac1 &
260               &           + this%single_gas(jgas)%n_mole_frac*this%single_gas(jgas)%d_log_mole_frac)
261      end select
262    end do
263
264  end subroutine print_ckd_model
265
266
267  !---------------------------------------------------------------------
268  ! Compute layerwise optical depth for each g point for ncol columns
269  ! at nlev layers
270  subroutine calc_optical_depth_ckd_model(this, ncol, nlev, istartcol, iendcol, nmaxgas, &
271       &  pressure_hl, temperature_fl, mole_fraction_fl, &
272       &  optical_depth_fl, rayleigh_od_fl)
273
274    use yomhook,             only : lhook, dr_hook
275    use radiation_constants, only : AccelDueToGravity
276
277    ! Input variables
278
279    class(ckd_model_type), intent(in), target  :: this
280    ! Number of columns, levels and input gases
281    integer,               intent(in)  :: ncol, nlev, nmaxgas, istartcol, iendcol
282    ! Pressure at half levels (Pa), dimensioned (ncol,nlev+1)
283    real(jprb),            intent(in)  :: pressure_hl(ncol,nlev+1)
284    ! Temperature at full levels (K), dimensioned (ncol,nlev)
285    real(jprb),            intent(in)  :: temperature_fl(istartcol:iendcol,nlev)
286    ! Gas mole fractions at full levels (mol mol-1), dimensioned (ncol,nlev,nmaxgas)
287    real(jprb),            intent(in)  :: mole_fraction_fl(ncol,nlev,nmaxgas)
288   
289    ! Output variables
290
291    ! Layer absorption optical depth for each g point
292    real(jprb),            intent(out) :: optical_depth_fl(this%ng,nlev,istartcol:iendcol)
293    ! In the shortwave only, the Rayleigh scattering optical depth
294    real(jprb),  optional, intent(out) :: rayleigh_od_fl(this%ng,nlev,istartcol:iendcol)
295
296    ! Local variables
297
298    real(jprb), pointer :: molar_abs(:,:,:), molar_abs_conc(:,:,:,:)
299
300    ! Natural logarithm of pressure at full levels
301    real(jprb) :: log_pressure_fl(nlev)
302
303    ! Optical depth of single gas at one point in space versus
304    ! spectral interval
305    !real(jprb) :: od_single_gas(this%ng)
306
307    real(jprb) :: multiplier(nlev), simple_multiplier(nlev), global_multiplier, temperature1
308
309    ! Indices and weights in temperature, pressure and concentration interpolation
310    real(jprb) :: pindex1, tindex1, cindex1
311    real(jprb) :: pw1(nlev), pw2(nlev), tw1(nlev), tw2(nlev), cw1(nlev), cw2(nlev)
312    integer    :: ip1(nlev), it1(nlev), ic1(nlev)
313
314    ! Natural logarithm of mole fraction at one point
315    real(jprb) :: log_conc
316
317    ! Minimum mole fraction in look-up-table
318    real(jprb) :: mole_frac1
319
320    integer :: jcol, jlev, jgas, igascode
321
322    real(jprb) :: hook_handle
323
324    if (lhook) call dr_hook('radiation_ecckd:calc_optical_depth',0,hook_handle)
325
326    global_multiplier = 1.0_jprb / (AccelDueToGravity * 0.001_jprb * AirMolarMass)
327
328    do jcol = istartcol,iendcol
329
330      log_pressure_fl = log(0.5_jprb * (pressure_hl(jcol,1:nlev)+pressure_hl(jcol,2:nlev+1)))
331
332      do jlev = 1,nlev
333        ! Find interpolation points in pressure
334        pindex1 = (log_pressure_fl(jlev)-this%log_pressure1) &
335             &    / this%d_log_pressure
336        pindex1 = 1.0_jprb + max(0.0_jprb, min(pindex1, this%npress-1.0001_jprb))
337        ip1(jlev) = int(pindex1)
338        pw2(jlev) = pindex1 - ip1(jlev)
339        pw1(jlev) = 1.0_jprb - pw2(jlev)
340
341        ! Find interpolation points in temperature
342        temperature1 = pw1(jlev)*this%temperature1(ip1(jlev)) &
343             &       + pw2(jlev)*this%temperature1(ip1(jlev)+1)
344        tindex1 = (temperature_fl(jcol,jlev) - temperature1) &
345             &    / this%d_temperature
346        tindex1 = 1.0_jprb + max(0.0_jprb, min(tindex1, this%ntemp-1.0001_jprb))
347        it1(jlev) = int(tindex1)
348        tw2(jlev) = tindex1 - it1(jlev)
349        tw1(jlev) = 1.0_jprb - tw2(jlev)
350
351        ! Concentration multiplier
352        simple_multiplier(jlev) = global_multiplier &
353             &  * (pressure_hl(jcol,jlev+1) - pressure_hl(jcol,jlev))
354      end do
355
356      optical_depth_fl(:,:,jcol) = 0.0_jprb
357     
358      do jgas = 1,this%ngas
359
360        associate (single_gas => this%single_gas(jgas))
361          igascode = this%single_gas(jgas)%i_gas_code
362         
363          select case (single_gas%i_conc_dependence)
364           
365          case (IConcDependenceLinear)
366            molar_abs => this%single_gas(jgas)%molar_abs
367            multiplier = simple_multiplier * mole_fraction_fl(jcol,:,igascode)
368
369            do jlev = 1,nlev
370              optical_depth_fl(:,jlev,jcol) = optical_depth_fl(:,jlev,jcol) &
371                   &        + (multiplier(jlev)*tw1(jlev)) * (pw1(jlev) * molar_abs(:,ip1(jlev),it1(jlev)) &
372                   &                +pw2(jlev) * molar_abs(:,ip1(jlev)+1,it1(jlev))) &
373                   &        + (multiplier(jlev)*tw2(jlev)) * (pw1(jlev) * molar_abs(:,ip1(jlev),it1(jlev)+1) &
374                   &                +pw2(jlev) * molar_abs(:,ip1(jlev)+1,it1(jlev)+1))
375            end do
376
377          case (IConcDependenceRelativeLinear)
378            molar_abs => this%single_gas(jgas)%molar_abs
379            multiplier = simple_multiplier  * (mole_fraction_fl(jcol,:,igascode) &
380                 &                            - single_gas%reference_mole_frac)
381            do jlev = 1,nlev
382              optical_depth_fl(:,jlev,jcol) = optical_depth_fl(:,jlev,jcol) &
383                   &        + (multiplier(jlev)*tw1(jlev)) * (pw1(jlev) * molar_abs(:,ip1(jlev),it1(jlev)) &
384                   &                +pw2(jlev) * molar_abs(:,ip1(jlev)+1,it1(jlev))) &
385                   &        + (multiplier(jlev)*tw2(jlev)) * (pw1(jlev) * molar_abs(:,ip1(jlev),it1(jlev)+1) &
386                   &                +pw2(jlev) * molar_abs(:,ip1(jlev)+1,it1(jlev)+1))
387            end do
388
389          case (IConcDependenceNone)
390            ! Composite gases
391            molar_abs => this%single_gas(jgas)%molar_abs
392            do jlev = 1,nlev
393              optical_depth_fl(:,jlev,jcol) = optical_depth_fl(:,jlev,jcol) &
394                   &  + (simple_multiplier(jlev)*tw1(jlev)) * (pw1(jlev) * molar_abs(:,ip1(jlev),it1(jlev)) &
395                   &                              +pw2(jlev) * molar_abs(:,ip1(jlev)+1,it1(jlev))) &
396                   &  + (simple_multiplier(jlev)*tw2(jlev)) * (pw1(jlev) * molar_abs(:,ip1(jlev),it1(jlev)+1) &
397                   &                              +pw2(jlev) * molar_abs(:,ip1(jlev)+1,it1(jlev)+1))
398            end do
399
400          case (IConcDependenceLUT)
401            ! Logarithmic interpolation in concentration space
402            molar_abs_conc => this%single_gas(jgas)%molar_abs_conc
403            mole_frac1 = exp(single_gas%log_mole_frac1)
404            do jlev = 1,nlev
405              ! Take care of mole_fraction == 0
406              log_conc = log(max(mole_fraction_fl(jcol,jlev,igascode), mole_frac1))
407              cindex1  = (log_conc - single_gas%log_mole_frac1) / single_gas%d_log_mole_frac
408              cindex1  = 1.0_jprb + max(0.0_jprb, min(cindex1, single_gas%n_mole_frac-1.0001_jprb))
409              ic1(jlev) = int(cindex1)
410              cw2(jlev) = cindex1 - ic1(jlev)
411              cw1(jlev) = 1.0_jprb - cw2(jlev)
412            end do
413              ! od_single_gas = cw1 * (tw1 * (pw1 * molar_abs_conc(:,ip1,it1,ic1) &
414              !      &                       +pw2 * molar_abs_conc(:,ip1+1,it1,ic1)) &
415              !      &                +tw2 * (pw1 * molar_abs_conc(:,ip1,it1+1,ic1) &
416              !      &                       +pw2 * molar_abs_conc(:,ip1+1,it1+1,ic1))) &
417              !      &         +cw2 * (tw1 * (pw1 * molar_abs_conc(:,ip1,it1,ic1+1) &
418              !      &                       +pw2 * molar_abs_conc(:,ip1+1,it1,ic1+1)) &
419              !      &                +tw2 * (pw1 * molar_abs_conc(:,ip1,it1+1,ic1+1) &
420              !      &                       +pw2 * molar_abs_conc(:,ip1+1,it1+1,ic1+1)))
421            do jlev = 1,nlev
422              optical_depth_fl(:,jlev,jcol) = optical_depth_fl(:,jlev,jcol) &
423                   &  + (simple_multiplier(jlev) * mole_fraction_fl(jcol,jlev,igascode)) * ( &
424                   &      (cw1(jlev) * tw1(jlev) * pw1(jlev)) * molar_abs_conc(:,ip1(jlev),it1(jlev),ic1(jlev)) &
425                   &     +(cw1(jlev) * tw1(jlev) * pw2(jlev)) * molar_abs_conc(:,ip1(jlev)+1,it1(jlev),ic1(jlev)) &
426                   &     +(cw1(jlev) * tw2(jlev) * pw1(jlev)) * molar_abs_conc(:,ip1(jlev),it1(jlev)+1,ic1(jlev)) &
427                   &     +(cw1(jlev) * tw2(jlev) * pw2(jlev)) * molar_abs_conc(:,ip1(jlev)+1,it1(jlev)+1,ic1(jlev)) &
428                   &     +(cw2(jlev) * tw1(jlev) * pw1(jlev)) * molar_abs_conc(:,ip1(jlev),it1(jlev),ic1(jlev)+1) &
429                   &     +(cw2(jlev) * tw1(jlev) * pw2(jlev)) * molar_abs_conc(:,ip1(jlev)+1,it1(jlev),ic1(jlev)+1) &
430                   &     +(cw2(jlev) * tw2(jlev) * pw1(jlev)) * molar_abs_conc(:,ip1(jlev),it1(jlev)+1,ic1(jlev)+1) &
431                   &     +(cw2(jlev) * tw2(jlev) * pw2(jlev)) * molar_abs_conc(:,ip1(jlev)+1,it1(jlev)+1,ic1(jlev)+1))
432            end do
433          end select
434           
435        end associate
436
437      end do
438
439      ! Ensure the optical depth is not negative
440      optical_depth_fl(:,:,jcol) = max(0.0_jprb, optical_depth_fl(:,:,jcol))
441
442      ! Rayleigh scattering
443      if (this%is_sw .and. present(rayleigh_od_fl)) then
444        do jlev = 1,nlev
445          rayleigh_od_fl(:,jlev,jcol) = global_multiplier &
446               &  * (pressure_hl(jcol,jlev+1) - pressure_hl(jcol,jlev)) * this%rayleigh_molar_scat
447        end do
448      end if
449
450    end do
451
452    if (lhook) call dr_hook('radiation_ecckd:calc_optical_depth',1,hook_handle)
453
454  end subroutine calc_optical_depth_ckd_model
455
456  !---------------------------------------------------------------------
457  ! Calculate the Planck function integrated across each of the g
458  ! points of this correlated k-distribution model, for a given
459  ! temperature, where Planck function is defined as the flux emitted
460  ! by a black body (rather than radiance)
461  subroutine calc_planck_function(this, nt, temperature, planck)
462
463    class(ckd_model_type), intent(in)  :: this
464    integer,    intent(in)  :: nt
465    real(jprb), intent(in)  :: temperature(:) ! K
466    real(jprb), intent(out) :: planck(this%ng,nt) ! W m-2
467
468    real(jprb) :: tindex1, tw1, tw2
469    integer    :: it1, jt
470
471    do jt = 1,nt
472      tindex1 = (temperature(jt) - this%temperature1_planck) &
473           &   * (1.0_jprb / this%d_temperature_planck)
474      if (tindex1 >= 0) then
475        ! Normal interpolation, and extrapolation for high temperatures
476        tindex1 = 1.0_jprb + tindex1
477        it1 = min(int(tindex1), this%nplanck-1)
478        tw2 = tindex1 - it1
479        tw1 = 1.0_jprb - tw2
480        planck(:,jt) = tw1 * this%planck_function(:,it1) &
481             &       + tw2 * this%planck_function(:,it1+1)
482      else
483        ! Interpolate linearly to zero
484        planck(:,jt) = this%planck_function(:,1) &
485             &       * (temperature(jt)/this%temperature1_planck)
486      end if
487    end do
488
489  end subroutine calc_planck_function
490 
491
492  !---------------------------------------------------------------------
493  ! Return the spectral solar irradiance integrated over each g point
494  ! of a solar correlated k-distribution model, given the
495  ! total_solar_irradiance
496  subroutine calc_incoming_sw(this, total_solar_irradiance, &
497       &                      spectral_solar_irradiance)
498
499    class(ckd_model_type), intent(in)    :: this
500    real(jprb),            intent(in)    :: total_solar_irradiance ! W m-2
501    real(jprb),            intent(inout) :: spectral_solar_irradiance(:,:) ! W m-2
502 
503    spectral_solar_irradiance &
504         &  = spread(total_solar_irradiance * this%norm_solar_irradiance, &
505         &           2, size(spectral_solar_irradiance,2))
506
507  end subroutine calc_incoming_sw
508
509end module radiation_ecckd
Note: See TracBrowser for help on using the repository browser.