Context Navigation

scm.F90 @ 3595

Last change on this file since 3595 was 3595, checked in by fhourdin, 5 years ago
Details SCM standard format
File size: 45.0 KB

Line
1	SUBROUTINE scm
2
3	USE ioipsl, only: ju2ymds, ymds2ju, ioconf_calendar,getin
4	USE phys_state_var_mod, ONLY : phys_state_var_init, phys_state_var_end, &
5	clwcon, detr_therm, &
6	qsol, fevap, z0m, z0h, agesno, &
7	du_gwd_rando, du_gwd_front, entr_therm, f0, fm_therm, &
8	falb_dir, falb_dif, &
9	ftsol, pbl_tke, pctsrf, radsol, rain_fall, snow_fall, ratqs, &
10	rnebcon, rugoro, sig1, w01, solaire_etat0, sollw, sollwdown, &
11	solsw, t_ancien, q_ancien, u_ancien, v_ancien, wake_cstar, &
12	wake_delta_pbl_TKE, delta_tsurf, wake_fip, wake_pe, &
13	wake_deltaq, wake_deltat, wake_s, wake_dens, &
14	zgam, zmax0, zmea, zpic, zsig, &
15	zstd, zthe, zval, ale_bl, ale_bl_trig, alp_bl, ql_ancien, qs_ancien, &
16	prlw_ancien, prsw_ancien, prw_ancien, &
17	u10m,v10m,ale_wake,ale_bl_stat
18
19
20	USE dimphy
21	USE surface_data, only : type_ocean,ok_veget
22	USE pbl_surface_mod, only : ftsoil, pbl_surface_init, &
23	pbl_surface_final
24	USE fonte_neige_mod, only : fonte_neige_init, fonte_neige_final
25
26	USE infotrac ! new
27	USE control_mod
28	USE indice_sol_mod
29	USE phyaqua_mod
30	! USE mod_1D_cases_read
31	USE mod_1D_cases_read_std
32	!USE mod_1D_amma_read
33	USE print_control_mod, ONLY: lunout, prt_level
34	USE iniphysiq_mod, ONLY: iniphysiq
35	USE mod_const_mpi, ONLY: comm_lmdz
36	USE physiq_mod, ONLY: physiq
37	USE comvert_mod, ONLY: presnivs, ap, bp, dpres,nivsig, nivsigs, pa, &
38	preff, aps, bps, pseudoalt, scaleheight
39	USE temps_mod, ONLY: annee_ref, calend, day_end, day_ini, day_ref, &
40	itau_dyn, itau_phy, start_time, year_len
41	USE phys_cal_mod, ONLY : year_len_phys_cal_mod => year_len
42
43	implicit none
44	#include "dimensions.h"
45	#include "YOMCST.h"
46	!!#include "control.h"
47	#include "clesphys.h"
48	#include "dimsoil.h"
49	!#include "indicesol.h"
50
51	#include "compar1d.h"
52	#include "flux_arp.h"
53	#include "date_cas.h"
54	#include "tsoilnudge.h"
55	#include "fcg_gcssold.h"
56	#include "compbl.h"
57
58	!=====================================================================
59	! DECLARATIONS
60	!=====================================================================
61
62	#undef OUTPUT_PHYS_SCM
63
64	!---------------------------------------------------------------------
65	! Externals
66	!---------------------------------------------------------------------
67	external fq_sat
68	real fq_sat
69
70	!---------------------------------------------------------------------
71	! Arguments d' initialisations de la physique (USER DEFINE)
72	!---------------------------------------------------------------------
73
74	integer, parameter :: ngrid=1
75	real :: zcufi = 1.
76	real :: zcvfi = 1.
77
78	!- real :: nat_surf
79	!- logical :: ok_flux_surf
80	!- real :: fsens
81	!- real :: flat
82	!- real :: tsurf
83	!- real :: rugos
84	!- real :: qsol(1:2)
85	!- real :: qsurf
86	!- real :: psurf
87	!- real :: zsurf
88	!- real :: albedo
89	!-
90	!- real :: time = 0.
91	!- real :: time_ini
92	!- real :: xlat
93	!- real :: xlon
94	!- real :: wtsurf
95	!- real :: wqsurf
96	!- real :: restart_runoff
97	!- real :: xagesno
98	!- real :: qsolinp
99	!- real :: zpicinp
100	!-
101	real :: fnday
102	real :: day, daytime
103	real :: day1
104	real :: heure
105	integer :: jour
106	integer :: mois
107	integer :: an
108
109	!---------------------------------------------------------------------
110	! Declarations related to forcing and initial profiles
111	!---------------------------------------------------------------------
112
113	integer :: kmax = llm
114	integer llm700,nq1,nq2
115	INTEGER, PARAMETER :: nlev_max=1000, nqmx=1000
116	real timestep, frac
117	real height(nlev_max),tttprof(nlev_max),qtprof(nlev_max)
118	real uprof(nlev_max),vprof(nlev_max),e12prof(nlev_max)
119	real ugprof(nlev_max),vgprof(nlev_max),wfls(nlev_max)
120	real dqtdxls(nlev_max),dqtdyls(nlev_max)
121	real dqtdtls(nlev_max),thlpcar(nlev_max)
122	real qprof(nlev_max,nqmx)
123
124	! integer :: forcing_type
125	logical :: forcing_les = .false.
126	logical :: forcing_armcu = .false.
127	logical :: forcing_rico = .false.
128	logical :: forcing_radconv = .false.
129	logical :: forcing_toga = .false.
130	logical :: forcing_twpice = .false.
131	logical :: forcing_amma = .false.
132	logical :: forcing_dice = .false.
133	logical :: forcing_gabls4 = .false.
134
135	logical :: forcing_GCM2SCM = .false.
136	logical :: forcing_GCSSold = .false.
137	logical :: forcing_sandu = .false.
138	logical :: forcing_astex = .false.
139	logical :: forcing_fire = .false.
140	logical :: forcing_case = .false.
141	logical :: forcing_case2 = .false.
142	logical :: forcing_SCM = .false.
143	integer :: type_ts_forcing ! 0 = SST constant; 1 = SST read from a file
144	! (cf read_tsurf1d.F)
145
146	!flag forcings
147	logical :: nudge_wind=.true.
148	logical :: nudge_thermo=.false.
149	logical :: cptadvw=.true.
150	!=====================================================================
151	! DECLARATIONS FOR EACH CASE
152	!=====================================================================
153	!
154	#include "1D_decl_cases.h"
155	!
156	!---------------------------------------------------------------------
157	! Declarations related to nudging
158	!---------------------------------------------------------------------
159	integer :: nudge_max
160	parameter (nudge_max=9)
161	integer :: inudge_RHT=1
162	integer :: inudge_UV=2
163	logical :: nudge(nudge_max)
164	real :: t_targ(llm)
165	real :: rh_targ(llm)
166	real :: u_targ(llm)
167	real :: v_targ(llm)
168	!
169	!---------------------------------------------------------------------
170	! Declarations related to vertical discretization:
171	!---------------------------------------------------------------------
172	real :: pzero=1.e5
173	real :: play (llm),zlay (llm),sig_s(llm),plev(llm+1)
174	real :: playd(llm),zlayd(llm),ap_amma(llm+1),bp_amma(llm+1)
175
176	!---------------------------------------------------------------------
177	! Declarations related to variables
178	!---------------------------------------------------------------------
179
180	real :: phi(llm)
181	real :: teta(llm),tetal(llm),temp(llm),u(llm),v(llm),w(llm)
182	REAL rot(1, llm) ! relative vorticity, in s-1
183	real :: rlat_rad(1),rlon_rad(1)
184	real :: omega(llm),omega2(llm),rho(llm+1)
185	real :: ug(llm),vg(llm),fcoriolis
186	real :: sfdt, cfdt
187	real :: du_phys(llm),dv_phys(llm),dt_phys(llm)
188	real :: w_adv(llm),z_adv(llm)
189	real :: d_t_vert_adv(llm),d_u_vert_adv(llm),d_v_vert_adv(llm)
190	real :: dt_cooling(llm),d_t_adv(llm),d_t_nudge(llm)
191	real :: d_u_nudge(llm),d_v_nudge(llm)
192	real :: du_adv(llm),dv_adv(llm)
193	real :: du_age(llm),dv_age(llm)
194	real :: alpha
195	real :: ttt
196
197	REAL, ALLOCATABLE, DIMENSION(:,:):: q
198	REAL, ALLOCATABLE, DIMENSION(:,:):: dq
199	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_vert_adv
200	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_adv
201	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_nudge
202	! REAL, ALLOCATABLE, DIMENSION(:):: d_th_adv
203
204	!---------------------------------------------------------------------
205	! Initialization of surface variables
206	!---------------------------------------------------------------------
207	real :: run_off_lic_0(1)
208	real :: fder(1),snsrf(1,nbsrf),qsurfsrf(1,nbsrf)
209	real :: tsoil(1,nsoilmx,nbsrf)
210	! real :: agesno(1,nbsrf)
211
212	!---------------------------------------------------------------------
213	! Call to phyredem
214	!---------------------------------------------------------------------
215	logical :: ok_writedem =.true.
216	real :: sollw_in = 0.
217	real :: solsw_in = 0.
218
219	!---------------------------------------------------------------------
220	! Call to physiq
221	!---------------------------------------------------------------------
222	logical :: firstcall=.true.
223	logical :: lastcall=.false.
224	real :: phis(1) = 0.0
225	real :: dpsrf(1)
226
227	!---------------------------------------------------------------------
228	! Initializations of boundary conditions
229	!---------------------------------------------------------------------
230	real, allocatable :: phy_nat (:) ! 0=ocean libre,1=land,2=glacier,3=banquise
231	real, allocatable :: phy_alb (:) ! Albedo land only (old value condsurf_jyg=0.3)
232	real, allocatable :: phy_sst (:) ! SST (will not be used; cf read_tsurf1d.F)
233	real, allocatable :: phy_bil (:) ! Ne sert que pour les slab_ocean
234	real, allocatable :: phy_rug (:) ! Longueur rugosite utilisee sur land only
235	real, allocatable :: phy_ice (:) ! Fraction de glace
236	real, allocatable :: phy_fter(:) ! Fraction de terre
237	real, allocatable :: phy_foce(:) ! Fraction de ocean
238	real, allocatable :: phy_fsic(:) ! Fraction de glace
239	real, allocatable :: phy_flic(:) ! Fraction de glace
240
241	!---------------------------------------------------------------------
242	! Fichiers et d'autres variables
243	!---------------------------------------------------------------------
244	integer :: k,l,i,it=1,mxcalc
245	integer :: nsrf
246	integer jcode
247	INTEGER read_climoz
248	!
249	integer :: it_end ! iteration number of the last call
250	!Al1
251	integer ecrit_slab_oc !1=ecrit,-1=lit,0=no file
252	data ecrit_slab_oc/-1/
253	!
254	! if flag_inhib_forcing = 0, tendencies of forcing are added
255	! <> 0, tendencies of forcing are not added
256	INTEGER :: flag_inhib_forcing = 0
257
258
259	print*,'VOUS ENTREZ DANS LE 1D FORMAT STANDARD'
260
261	!=====================================================================
262	! INITIALIZATIONS
263	!=====================================================================
264	du_phys(:)=0.
265	dv_phys(:)=0.
266	dt_phys(:)=0.
267	d_t_vert_adv(:)=0.
268	d_u_vert_adv(:)=0.
269	d_v_vert_adv(:)=0.
270	dt_cooling(:)=0.
271	d_t_adv(:)=0.
272	d_t_nudge(:)=0.
273	d_u_nudge(:)=0.
274	d_v_nudge(:)=0.
275	du_adv(:)=0.
276	dv_adv(:)=0.
277	du_age(:)=0.
278	dv_age(:)=0.
279
280	! Initialization of Common turb_forcing
281	dtime_frcg = 0.
282	Turb_fcg_gcssold=.false.
283	hthturb_gcssold = 0.
284	hqturb_gcssold = 0.
285
286
287
288
289	!---------------------------------------------------------------------
290	! OPTIONS OF THE 1D SIMULATION (lmdz1d.def => unicol.def)
291	!---------------------------------------------------------------------
292	!Al1
293	call conf_unicol
294	!Al1 moves this gcssold var from common fcg_gcssold to
295	Turb_fcg_gcssold = xTurb_fcg_gcssold
296	! --------------------------------------------------------------------
297	close(1)
298	!Al1
299	write(,) 'lmdz1d.def lu => unicol.def'
300
301	forcing_SCM = .true.
302	year_ini_cas=1997
303	! It is possible that those parameters are run twice.
304
305	! A REVOIR : LIRE PEUT ETRE AN MOIS JOUR DIRECETEMENT
306	call getin('anneeref',year_ini_cas)
307	call getin('dayref',day_deb)
308	mth_ini_cas=1 ! pour le moment on compte depuis le debut de l'annee
309	call getin('time_ini',heure_ini_cas)
310
311	type_ts_forcing = 0
312	IF (nat_surf==0) type_ts_forcing=1 ! SST forcee sur OCEAN
313	print*,'NATURE DE LA SURFACE ',nat_surf
314	!
315	! Initialization of the logical switch for nudging
316	jcode = iflag_nudge
317	do i = 1,nudge_max
318	nudge(i) = mod(jcode,10) .ge. 1
319	jcode = jcode/10
320	enddo
321	!---------------------------------------------------------------------
322	! Definition of the run
323	!---------------------------------------------------------------------
324
325	call conf_gcm( 99, .TRUE. )
326
327	!-----------------------------------------------------------------------
328	allocate( phy_nat (year_len)) ! 0=ocean libre,1=land,2=glacier,3=banquise
329	phy_nat(:)=0.0
330	allocate( phy_alb (year_len)) ! Albedo land only (old value condsurf_jyg=0.3)
331	allocate( phy_sst (year_len)) ! SST (will not be used; cf read_tsurf1d.F)
332	allocate( phy_bil (year_len)) ! Ne sert que pour les slab_ocean
333	phy_bil(:)=1.0
334	allocate( phy_rug (year_len)) ! Longueur rugosite utilisee sur land only
335	allocate( phy_ice (year_len)) ! Fraction de glace
336	phy_ice(:)=0.0
337	allocate( phy_fter(year_len)) ! Fraction de terre
338	phy_fter(:)=0.0
339	allocate( phy_foce(year_len)) ! Fraction de ocean
340	phy_foce(:)=0.0
341	allocate( phy_fsic(year_len)) ! Fraction de glace
342	phy_fsic(:)=0.0
343	allocate( phy_flic(year_len)) ! Fraction de glace
344	phy_flic(:)=0.0
345	!-----------------------------------------------------------------------
346	! Choix du calendrier
347	! -------------------
348
349	! calend = 'earth_365d'
350	if (calend == 'earth_360d') then
351	call ioconf_calendar('360d')
352	write(,)'CALENDRIER CHOISI: Terrestre a 360 jours/an'
353	else if (calend == 'earth_365d') then
354	call ioconf_calendar('noleap')
355	write(,)'CALENDRIER CHOISI: Terrestre a 365 jours/an'
356	else if (calend == 'earth_366d') then
357	call ioconf_calendar('all_leap')
358	write(,)'CALENDRIER CHOISI: Terrestre bissextile'
359	else if (calend == 'gregorian') then
360	stop 'gregorian calend should not be used by normal user'
361	call ioconf_calendar('gregorian') ! not to be used by normal users
362	write(,)'CALENDRIER CHOISI: Gregorien'
363	else
364	write (,) 'ERROR : unknown calendar ', calend
365	stop 'calend should be 360d,earth_365d,earth_366d,gregorian'
366	endif
367	!-----------------------------------------------------------------------
368	!
369	!c Date :
370	! La date est supposee donnee sous la forme [annee, numero du jour dans
371	! l annee] ; l heure est donnee dans time_ini, lu dans lmdz1d.def.
372	! On appelle ymds2ju pour convertir [annee, jour] en [jour Julien].
373	! Le numero du jour est dans "day". L heure est traitee separement.
374	! La date complete est dans "daytime" (l'unite est le jour).
375	if (nday>0) then
376	fnday=nday
377	else
378	fnday=-nday/float(day_step)
379	endif
380	print *,'fnday=',fnday
381	! start_time doit etre en FRACTION DE JOUR
382	start_time=time_ini/24.
383
384	annee_ref = anneeref
385	mois = 1
386	day_ref = dayref
387	heure = 0.
388	itau_dyn = 0
389	itau_phy = 0
390	call ymds2ju(annee_ref,mois,day_ref,heure,day)
391	day_ini = int(day)
392	day_end = day_ini + int(fnday)
393
394	! Convert the initial date to Julian day
395	day_ini_cas=day_deb
396	print*,'time case',year_ini_cas,mth_ini_cas,day_ini_cas
397	call ymds2ju &
398	& (year_ini_cas,mth_ini_cas,day_ini_cas,heure_ini_cas*3600 &
399	& ,day_ju_ini_cas)
400	print*,'time case 2',day_ini_cas,day_ju_ini_cas
401	daytime = day + heure_ini_cas/24. ! 1st day and initial time of the simulation
402
403	! Print out the actual date of the beginning of the simulation :
404	call ju2ymds(daytime,year_print, month_print,day_print,sec_print)
405	print *,' Time of beginning : ', &
406	& year_print, month_print, day_print, sec_print
407
408	!---------------------------------------------------------------------
409	! Initialization of dimensions, geometry and initial state
410	!---------------------------------------------------------------------
411	! call init_phys_lmdz(1,1,llm,1,(/1/)) ! job now done via iniphysiq
412	! but we still need to initialize dimphy module (klon,klev,etc.) here.
413	call init_dimphy1D(1,llm)
414	call suphel
415	call infotrac_init
416
417	if (nqtot>nqmx) STOP 'Augmenter nqmx dans lmdz1d.F'
418	allocate(q(llm,nqtot)) ; q(:,:)=0.
419	allocate(dq(llm,nqtot))
420	allocate(d_q_vert_adv(llm,nqtot))
421	allocate(d_q_adv(llm,nqtot))
422	allocate(d_q_nudge(llm,nqtot))
423	! allocate(d_th_adv(llm))
424
425	q(:,:) = 0.
426	dq(:,:) = 0.
427	d_q_vert_adv(:,:) = 0.
428	d_q_adv(:,:) = 0.
429	d_q_nudge(:,:) = 0.
430
431	!
432	! No ozone climatology need be read in this pre-initialization
433	! (phys_state_var_init is called again in physiq)
434	read_climoz = 0
435	!
436	call phys_state_var_init(read_climoz)
437
438	if (ngrid.ne.klon) then
439	print*,'stop in inifis'
440	print*,'Probleme de dimensions :'
441	print*,'ngrid = ',ngrid
442	print*,'klon = ',klon
443	stop
444	endif
445	!!!=====================================================================
446	!!! Feedback forcing values for Gateaux differentiation (al1)
447	!!!=====================================================================
448	!!! Surface Planck forcing bracketing call radiation
449	!! surf_Planck = 0.
450	!! surf_Conv = 0.
451	!! write(,) 'Gateaux-dif Planck,Conv:',surf_Planck,surf_Conv
452	!!! a mettre dans le lmdz1d.def ou autre
453	!!
454	!!
455	qsol = qsolinp
456	qsurf = fq_sat(tsurf,psurf/100.)
457	day1= day_ini
458	time=daytime-day
459	ts_toga(1)=tsurf ! needed by read_tsurf1d.F
460	rho(1)=psurf/(rdtsurf(1.+(rv/rd-1.)*qsurf))
461
462	!
463	!! mpl et jyg le 22/08/2012 :
464	!! pour que les cas a flux de surface imposes marchent
465	IF(.NOT.ok_flux_surf.or.max(abs(wtsurf),abs(wqsurf))>0.) THEN
466	fsens=-wtsurfrcpdrho(1)
467	flat=-wqsurfrlvttrho(1)
468	print *,'Flux: ok_flux wtsurf wqsurf',ok_flux_surf,wtsurf,wqsurf
469	ENDIF
470	print*,'Flux sol ',fsens,flat
471	!! ok_flux_surf=.false.
472	!! fsens=-wtsurfrcpdrho(1)
473	!! flat=-wqsurfrlvttrho(1)
474	!!!!
475
476	! Vertical discretization and pressure levels at half and mid levels:
477
478	pa = 5e4
479	!! preff= 1.01325e5
480	preff = psurf
481	IF (ok_old_disvert) THEN
482	call disvert0(pa,preff,ap,bp,dpres,presnivs,nivsigs,nivsig)
483	print *,'On utilise disvert0'
484	aps(1:llm)=0.5*(ap(1:llm)+ap(2:llm+1))
485	bps(1:llm)=0.5*(bp(1:llm)+bp(2:llm+1))
486	scaleheight=8.
487	pseudoalt(1:llm)=-scaleheight*log(presnivs(1:llm)/preff)
488	ELSE
489	call disvert()
490	print *,'On utilise disvert'
491	! Nouvelle version disvert permettant d imposer ap,bp (modif L.Guez) MPL 18092012
492	! Dans ce cas, on lit ap,bp dans le fichier hybrid.txt
493	ENDIF
494
495	sig_s=presnivs/preff
496	plev =ap+bp*psurf
497	play = 0.5*(plev(1:llm)+plev(2:llm+1))
498	zlay=-rd300.log(play/psurf)/rg ! moved after reading profiles
499
500	IF (forcing_type .eq. 59) THEN
501	! pour forcing_sandu, on cherche l'indice le plus proche de 700hpa#3000m
502	write(,) '***********************'
503	do l = 1, llm
504	write(,) 'l,play(l),presnivs(l): ',l,play(l),presnivs(l)
505	if (trouve_700 .and. play(l).le.70000) then
506	llm700=l
507	print *,'llm700,play=',llm700,play(l)/100.
508	trouve_700= .false.
509	endif
510	enddo
511	write(,) '***********************'
512	ENDIF
513
514	!
515	!=====================================================================
516	! EVENTUALLY, READ FORCING DATA :
517	!=====================================================================
518
519	#include "1D_read_forc_cases.h"
520	print,'A d_t_adv ',d_t_adv(1:20)86400
521
522	if (forcing_GCM2SCM) then
523	write (,) 'forcing_GCM2SCM not yet implemented'
524	stop 'in initialization'
525	endif ! forcing_GCM2SCM
526
527	print*,'mxcalc=',mxcalc
528	! print*,'zlay=',zlay(mxcalc)
529	print*,'play=',play(mxcalc)
530
531	!Al1 pour SST forced, appell?? depuis ocean_forced_noice
532	ts_cur = tsurf ! SST used in read_tsurf1d
533	!=====================================================================
534	! Initialisation de la physique :
535	!=====================================================================
536
537	! Rq: conf_phys.F90 lit tous les flags de physiq.def; conf_phys appele depuis physiq.F
538	!
539	! day_step, iphysiq lus dans gcm.def ci-dessus
540	! timestep: calcule ci-dessous from rday et day_step
541	! ngrid=1
542	! llm: defini dans .../modipsl/modeles/LMDZ4/libf/grid/dimension
543	! rday: defini dans suphel.F (86400.)
544	! day_ini: lu dans run.def (dayref)
545	! rlat_rad,rlon-rad: transformes en radian de rlat,rlon lus dans lmdz1d.def (en degres)
546	! airefi,zcufi,zcvfi initialises au debut de ce programme
547	! rday,ra,rg,rd,rcpd declares dans YOMCST.h et calcules dans suphel.F
548	day_step = float(nsplit_phys)*day_step/float(iphysiq)
549	write (,) 'Time step divided by nsplit_phys (=',nsplit_phys,')'
550	timestep =rday/day_step
551	dtime_frcg = timestep
552	!
553	zcufi=airefi
554	zcvfi=airefi
555	!
556	rlat_rad(1)=xlat*rpi/180.
557	rlon_rad(1)=xlon*rpi/180.
558
559	! iniphysiq will call iniaqua who needs year_len from phys_cal_mod
560	year_len_phys_cal_mod=year_len
561
562	! Ehouarn: iniphysiq requires arrays related to (3D) dynamics grid,
563	! e.g. for cell boundaries, which are meaningless in 1D; so pad these
564	! with '0.' when necessary
565	call iniphysiq(iim,jjm,llm, &
566	1,comm_lmdz, &
567	rday,day_ini,timestep, &
568	(/rlat_rad(1),0./),(/0./), &
569	(/0.,0./),(/rlon_rad(1),0./), &
570	(/ (/airefi,0./),(/0.,0./) /), &
571	(/zcufi,0.,0.,0./), &
572	(/zcvfi,0./), &
573	ra,rg,rd,rcpd,1)
574	print*,'apres iniphysiq'
575
576	! 2 PARAMETRES QUI DEVRAIENT ETRE LUS DANS run.def MAIS NE LE SONT PAS ICI:
577	co2_ppm= 330.0
578	solaire=1370.0
579
580	! Ecriture du startphy avant le premier appel a la physique.
581	! On le met juste avant pour avoir acces a tous les champs
582
583	if (ok_writedem) then
584
585	!--------------------------------------------------------------------------
586	! pbl_surface_init (called here) and pbl_surface_final (called by phyredem)
587	! need : qsol fder snow qsurf evap rugos agesno ftsoil
588	!--------------------------------------------------------------------------
589
590	type_ocean = "force"
591	run_off_lic_0(1) = restart_runoff
592	call fonte_neige_init(run_off_lic_0)
593
594	fder=0.
595	snsrf(1,:)=snowmass ! masse de neige des sous surface
596	qsurfsrf(1,:)=qsurf ! humidite de l'air des sous surface
597	fevap=0.
598	z0m(1,:)=rugos ! couverture de neige des sous surface
599	z0h(1,:)=rugosh ! couverture de neige des sous surface
600	agesno = xagesno
601	tsoil(:,:,:)=tsurf
602	!------ AMMA 2e run avec modele sol et rayonnement actif (MPL 23052012)
603	! tsoil(1,1,1)=299.18
604	! tsoil(1,2,1)=300.08
605	! tsoil(1,3,1)=301.88
606	! tsoil(1,4,1)=305.48
607	! tsoil(1,5,1)=308.00
608	! tsoil(1,6,1)=308.00
609	! tsoil(1,7,1)=308.00
610	! tsoil(1,8,1)=308.00
611	! tsoil(1,9,1)=308.00
612	! tsoil(1,10,1)=308.00
613	! tsoil(1,11,1)=308.00
614	!-----------------------------------------------------------------------
615	call pbl_surface_init(fder, snsrf, qsurfsrf, tsoil)
616
617	!------------------ prepare limit conditions for limit.nc -----------------
618	!-- Ocean force
619
620	print*,'avant phyredem'
621	pctsrf(1,:)=0.
622	if (nat_surf.eq.0.) then
623	pctsrf(1,is_oce)=1.
624	pctsrf(1,is_ter)=0.
625	pctsrf(1,is_lic)=0.
626	pctsrf(1,is_sic)=0.
627	else if (nat_surf .eq. 1) then
628	pctsrf(1,is_oce)=0.
629	pctsrf(1,is_ter)=1.
630	pctsrf(1,is_lic)=0.
631	pctsrf(1,is_sic)=0.
632	else if (nat_surf .eq. 2) then
633	pctsrf(1,is_oce)=0.
634	pctsrf(1,is_ter)=0.
635	pctsrf(1,is_lic)=1.
636	pctsrf(1,is_sic)=0.
637	else if (nat_surf .eq. 3) then
638	pctsrf(1,is_oce)=0.
639	pctsrf(1,is_ter)=0.
640	pctsrf(1,is_lic)=0.
641	pctsrf(1,is_sic)=1.
642
643	end if
644
645
646	print*,'nat_surf,pctsrf(1,is_oce),pctsrf(1,is_ter)',nat_surf &
647	& ,pctsrf(1,is_oce),pctsrf(1,is_ter)
648
649	zmasq=pctsrf(1,is_ter)+pctsrf(1,is_lic)
650	zpic = zpicinp
651	ftsol=tsurf
652	nsw=6 ! on met le nb de bandes SW=6, pour initialiser
653	! 6 albedo, mais on peut quand meme tourner avec
654	! moins. Seules les 2 ou 4 premiers seront lus
655	falb_dir=albedo
656	falb_dif=albedo
657	rugoro=rugos
658	t_ancien(1,:)=temp(:)
659	q_ancien(1,:)=q(:,1)
660	ql_ancien = 0.
661	qs_ancien = 0.
662	prlw_ancien = 0.
663	prsw_ancien = 0.
664	prw_ancien = 0.
665	!jyg<
666	!! pbl_tke(:,:,:)=1.e-8
667	pbl_tke(:,:,:)=0.
668	pbl_tke(:,2,:)=1.e-2
669	PRINT *, ' pbl_tke dans lmdz1d '
670	if (prt_level .ge. 5) then
671	DO nsrf = 1,4
672	PRINT *,'pbl_tke(1,:,',nsrf,') ',pbl_tke(1,:,nsrf)
673	ENDDO
674	end if
675
676	!>jyg
677
678	rain_fall=0.
679	snow_fall=0.
680	solsw=0.
681	sollw=0.
682	sollwdown=rsigmatsurf*4
683	radsol=0.
684	rnebcon=0.
685	ratqs=0.
686	clwcon=0.
687	zmax0 = 0.
688	zmea=0.
689	zstd=0.
690	zsig=0.
691	zgam=0.
692	zval=0.
693	zthe=0.
694	sig1=0.
695	w01=0.
696	wake_cstar = 0.
697	wake_deltaq = 0.
698	wake_deltat = 0.
699	wake_delta_pbl_TKE(:,:,:) = 0.
700	delta_tsurf = 0.
701	wake_fip = 0.
702	wake_pe = 0.
703	wake_s = 0.
704	wake_dens = 0.
705	ale_bl = 0.
706	ale_bl_trig = 0.
707	alp_bl = 0.
708	IF (ALLOCATED(du_gwd_rando)) du_gwd_rando = 0.
709	IF (ALLOCATED(du_gwd_front)) du_gwd_front = 0.
710	entr_therm = 0.
711	detr_therm = 0.
712	f0 = 0.
713	fm_therm = 0.
714	u_ancien(1,:)=u(:)
715	v_ancien(1,:)=v(:)
716
717	u10m=0.
718	v10m=0.
719	ale_wake=0.
720	ale_bl_stat=0.
721
722	!------------------------------------------------------------------------
723	! Make file containing restart for the physics (startphy.nc)
724	!
725	! NB: List of the variables to be written by phyredem (via put_field):
726	! rlon,rlat,zmasq,pctsrf(:,is_ter),pctsrf(:,is_lic),pctsrf(:,is_oce)
727	! pctsrf(:,is_sic),ftsol(:,nsrf),tsoil(:,isoil,nsrf),qsurf(:,nsrf)
728	! qsol,falb_dir(:,nsrf),falb_dif(:,nsrf),evap(:,nsrf),snow(:,nsrf)
729	! radsol,solsw,sollw, sollwdown,fder,rain_fall,snow_fall,frugs(:,nsrf)
730	! agesno(:,nsrf),zmea,zstd,zsig,zgam,zthe,zpic,zval,rugoro
731	! t_ancien,q_ancien,,frugs(:,is_oce),clwcon(:,1),rnebcon(:,1),ratqs(:,1)
732	! run_off_lic_0,pbl_tke(:,1:klev,nsrf), zmax0,f0,sig1,w01
733	! wake_deltat,wake_deltaq,wake_s,wake_dens,wake_cstar,
734	! wake_fip,wake_delta_pbl_tke(:,1:klev,nsrf)
735	!
736	! NB2: The content of the startphy.nc file depends on some flags defined in
737	! the ".def" files. However, since conf_phys is not called in lmdz1d.F90, these flags have
738	! to be set at some arbitratry convenient values.
739	!------------------------------------------------------------------------
740	!Al1 =============== restart option ==========================
741	if (.not.restart) then
742	iflag_pbl = 5
743	call phyredem ("startphy.nc")
744	else
745	! (desallocations)
746	print*,'callin surf final'
747	call pbl_surface_final( fder, snsrf, qsurfsrf, tsoil)
748	print*,'after surf final'
749	CALL fonte_neige_final(run_off_lic_0)
750	endif
751
752	ok_writedem=.false.
753	print*,'apres phyredem'
754
755	endif ! ok_writedem
756
757	!------------------------------------------------------------------------
758	! Make file containing boundary conditions (limit.nc) Al1->restartdyn*
759	! --------------------------------------------------
760	! NB: List of the variables to be written in limit.nc
761	! (by writelim.F, subroutine of 1DUTILS.h):
762	! phy_nat,phy_alb,phy_sst,phy_bil,phy_rug,phy_ice,
763	! phy_fter,phy_foce,phy_flic,phy_fsic)
764	!------------------------------------------------------------------------
765	do i=1,year_len
766	phy_nat(i) = nat_surf
767	phy_alb(i) = albedo
768	phy_sst(i) = tsurf ! read_tsurf1d will be used instead
769	phy_rug(i) = rugos
770	phy_fter(i) = pctsrf(1,is_ter)
771	phy_foce(i) = pctsrf(1,is_oce)
772	phy_fsic(i) = pctsrf(1,is_sic)
773	phy_flic(i) = pctsrf(1,is_lic)
774	enddo
775
776	! fabrication de limit.nc
777	call writelim (1,phy_nat,phy_alb,phy_sst,phy_bil,phy_rug, &
778	& phy_ice,phy_fter,phy_foce,phy_flic,phy_fsic)
779
780
781	call phys_state_var_end
782	!Al1
783	if (restart) then
784	print*,'call to restart dyn 1d'
785	Call dyn1deta0("start1dyn.nc",plev,play,phi,phis,presnivs, &
786	& u,v,temp,q,omega2)
787
788	print*,'fnday,annee_ref,day_ref,day_ini', &
789	& fnday,annee_ref,day_ref,day_ini
790	!** call ymds2ju(annee_ref,mois,day_ini,heure,day)
791	day = day_ini
792	day_end = day_ini + nday
793	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
794
795	! Print out the actual date of the beginning of the simulation :
796	call ju2ymds(daytime, an, mois, jour, heure)
797	print *,' Time of beginning : y m d h',an, mois,jour,heure/3600.
798
799	day = int(daytime)
800	time=daytime-day
801
802	print,'*** intialised fields from restart1dyn *****'
803	print*,'plev,play,phi,phis,presnivs,u,v,temp,q,omega2'
804	print*,'temp(1),q(1,1),u(1),v(1),plev(1),phis :'
805	print*,temp(1),q(1,1),u(1),v(1),plev(1),phis
806	! raz for safety
807	do l=1,llm
808	d_q_vert_adv(l,1) = 0.
809	enddo
810	endif
811	!Al1 ================ end restart =================================
812	IF (ecrit_slab_oc.eq.1) then
813	open(97,file='div_slab.dat',STATUS='UNKNOWN')
814	elseif (ecrit_slab_oc.eq.0) then
815	open(97,file='div_slab.dat',STATUS='OLD')
816	endif
817	!
818	!=====================================================================
819	#ifdef OUTPUT_PHYS_SCM
820	CALL iophys_ini
821	#endif
822	! START OF THE TEMPORAL LOOP :
823	!=====================================================================
824
825	it_end = nint(fnday*day_step)
826	!test JLD it_end = 10
827	do while(it.le.it_end)
828
829	if (prt_level.ge.1) then
830	print*,'XXXXXXXXXXXXXXXXXXX ITAP,day,time=', &
831	& it,day,time,it_end,day_step
832	print*,'PAS DE TEMPS ',timestep
833	endif
834	!Al1 demande de restartphy.nc
835	if (it.eq.it_end) lastcall=.True.
836
837	!---------------------------------------------------------------------
838	! Interpolation of forcings in time and onto model levels
839	!---------------------------------------------------------------------
840
841	#include "1D_interp_cases.h"
842	! Vertical advection
843	! call lstendH(llm,nqtot,omega,d_t_vert_adv,d_q_vert_adv,q,temp,u,v,play)
844	! print,'B d_t_adv ',d_t_adv(1:20)86400
845	! print,'B d_t_vert_adv ',d_t_vert_adv(1:20)86400
846	! print*,'B dt omega ',omega
847
848	!---------------------------------------------------------------------
849	! Geopotential :
850	!---------------------------------------------------------------------
851
852	phi(1)=RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
853	do l = 1, llm-1
854	phi(l+1)=phi(l)+RD(temp(l)+temp(l+1)) &
855	& (play(l)-play(l+1))/(play(l)+play(l+1))
856	enddo
857
858	!---------------------------------------------------------------------
859	! Vertical advection
860	!---------------------------------------------------------------------
861
862	IF ( forc_w+forc_omega > 0 ) THEN
863
864	IF ( forc_w == 1 ) THEN
865	w_adv=w_mod_cas
866	z_adv=phi/RG
867	ELSE
868	w_adv=omega
869	z_adv=play
870	ENDIF
871
872	teta=temp(pzero/play)*rkappa
873	do l=2,llm-1
874	d_u_vert_adv(l)=-w_adv(l)*(u(l+1)-u(l-1))/(z_adv(l+1)-z_adv(l-1))
875	d_v_vert_adv(l)=-w_adv(l)*(v(l+1)-v(l-1))/(z_adv(l+1)-z_adv(l-1))
876	d_t_vert_adv(l)=-(w_adv(l)(teta(l+1)-teta(l-1))/(z_adv(l+1)-z_adv(l-1)))/(pzero/play(l))*rkappa
877	d_q_vert_adv(l,1)=-w_adv(l)*(q(l+1,1)-q(l-1,1))/(z_adv(l+1)-z_adv(l-1))
878	enddo
879	d_t_adv(:)=d_t_adv(:)+d_t_vert_adv(:)
880	d_q_adv(:,1)=d_q_adv(:,1)+d_q_vert_adv(:,1)
881
882	print*,'OMEGA ',w_adv(10),z_adv(10)
883
884	ENDIF
885
886	!---------------------------------------------------------------------
887	! Listing output for debug prt_level>=1
888	!---------------------------------------------------------------------
889	if (prt_level>=1) then
890	print *,' avant physiq : -------- day time ',day,time
891	write(,) 'firstcall,lastcall,phis', &
892	& firstcall,lastcall,phis
893	end if
894	if (prt_level>=5) then
895	write(*,'(a10,2a4,4a13)') 'BEFOR1 IT=','it','l', &
896	& 'presniv','plev','play','phi'
897	write(*,'(a10,2i4,4f13.2)') ('BEFOR1 IT= ',it,l, &
898	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
899	write(*,'(a11,2a4,a11,6a8)') 'BEFOR2','it','l', &
900	& 'presniv','u','v','temp','q1','q2','omega2'
901	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('BEFOR2 IT= ',it,l, &
902	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
903	endif
904
905	!---------------------------------------------------------------------
906	! Call physiq :
907	!---------------------------------------------------------------------
908	call physiq(ngrid,llm, &
909	firstcall,lastcall,timestep, &
910	plev,play,phi,phis,presnivs, &
911	u,v, rot, temp,q,omega2, &
912	du_phys,dv_phys,dt_phys,dq,dpsrf)
913	firstcall=.false.
914
915	!---------------------------------------------------------------------
916	! Listing output for debug
917	!---------------------------------------------------------------------
918	if (prt_level>=5) then
919	write(*,'(a11,2a4,4a13)') 'AFTER1 IT=','it','l', &
920	& 'presniv','plev','play','phi'
921	write(*,'(a11,2i4,4f13.2)') ('AFTER1 it= ',it,l, &
922	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
923	write(*,'(a11,2a4,a11,6a8)') 'AFTER2','it','l', &
924	& 'presniv','u','v','temp','q1','q2','omega2'
925	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('AFTER2 it= ',it,l, &
926	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
927	write(*,'(a11,2a4,a11,5a8)') 'AFTER3','it','l', &
928	& 'presniv','du_phys','dv_phys','dt_phys','dq1','dq2'
929	write(*,'(a11,2i4,f11.2,5f8.2)') ('AFTER3 it= ',it,l, &
930	& presnivs(l),86400du_phys(l),86400dv_phys(l), &
931	& 86400dt_phys(l),86400dq(l,1),dq(l,2),l=1,llm)
932	write(,) 'dpsrf',dpsrf
933	endif
934	!---------------------------------------------------------------------
935	! Add physical tendencies :
936	!---------------------------------------------------------------------
937
938	fcoriolis=2.sin(rpixlat/180.)*romega
939
940	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
941	!! CONSERVE EN ATTENDANT QUE LE CAS EN QUESTION FONCTIONNE EN STD !!
942	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
943	! if (forcing_radconv .or. forcing_fire) then
944	! fcoriolis=0.0
945	! dt_cooling=0.0
946	! d_t_adv=0.0
947	! d_q_adv=0.0
948	! endif
949	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
950
951	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
952	!! CONSERVE EN ATTENDANT QUE LE CAS EN QUESTION FONCTIONNE EN STD !!
953	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
954	! if (forcing_toga .or. forcing_GCSSold .or. forcing_twpice &
955	! & .or.forcing_amma .or. forcing_type.eq.101) then
956	! fcoriolis=0.0 ; ug=0. ; vg=0.
957	! endif
958	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
959
960	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
961	!! CONSERVE EN ATTENDANT QUE LE CAS EN QUESTION FONCTIONNE EN STD !!
962	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
963	! if(forcing_rico) then
964	! dt_cooling=0.
965	! endif
966	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
967
968	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
969	!! CONSERVE EN ATTENDANT QUE LE CAS EN QUESTION FONCTIONNE EN STD !!
970	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
971	!CRio:Attention modif sp??cifique cas de Caroline
972	! if (forcing_type==-1) then
973	! fcoriolis=0.
974	!
975	!on calcule dt_cooling
976	! do l=1,llm
977	! if (play(l).ge.20000.) then
978	! dt_cooling(l)=-1.5/86400.
979	! elseif ((play(l).ge.10000.).and.((play(l).lt.20000.))) then
980	! dt_cooling(l)=-1.5/86400.(play(l)-10000.)/(10000.)-1./86400.(20000.-play(l))/10000.*(temp(l)-200.)
981	! else
982	! dt_cooling(l)=-1.*(temp(l)-200.)/86400.
983	! endif
984	! enddo
985	!
986	! endif
987	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
988
989	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
990	!! CONSERVE EN ATTENDANT QUE LE CAS EN QUESTION FONCTIONNE EN STD !!
991	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
992	! if (forcing_sandu) then
993	! ug(1:llm)=u_mod(1:llm)
994	! vg(1:llm)=v_mod(1:llm)
995	! endif
996	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
997
998	IF (prt_level >= 5) print*, 'fcoriolis, xlat,mxcalc ', &
999	fcoriolis, xlat,mxcalc
1000
1001	! print *,'u-ug=',u-ug
1002
1003	!!!!!!!!!!!!!!!!!!!!!!!!
1004	! Geostrophic wind
1005	! Le calcul ci dessous est insuffisamment precis
1006	! du_age(1:mxcalc)=fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
1007	! dv_age(1:mxcalc)=-fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
1008	!!!!!!!!!!!!!!!!!!!!!!!!
1009	sfdt = sin(0.5fcoriolistimestep)
1010	cfdt = cos(0.5fcoriolistimestep)
1011	! print *,'fcoriolis,sfdt,cfdt,timestep',fcoriolis,sfdt,cfdt,timestep
1012	!
1013	du_age(1:mxcalc)= -2.sfdt/timestep &
1014	& (sfdt*(u(1:mxcalc)-ug(1:mxcalc)) - &
1015	& cfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
1016	!! : fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
1017	!
1018	dv_age(1:mxcalc)= -2.sfdt/timestep &
1019	& (cfdt*(u(1:mxcalc)-ug(1:mxcalc)) + &
1020	& sfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
1021	!! : -fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
1022	!
1023	!!!!!!!!!!!!!!!!!!!!!!!!
1024	! Nudging
1025	!!!!!!!!!!!!!!!!!!!!!!!!
1026	d_t_nudge(:) = 0.
1027	d_u_nudge(:) = 0.
1028	d_v_nudge(:) = 0.
1029	d_q_nudge(:,:) = 0.
1030	DO l=1,llm
1031	IF ( play(l) < p_nudging_u .AND. nint(nudging_u) /= 0 ) &
1032	& d_u_nudge(l)=(u_nudg_mod_cas(l)-u(l))/nudging_u
1033	IF ( play(l) < p_nudging_v .AND. nint(nudging_v) /= 0 ) &
1034	& d_v_nudge(l)=(v_nudg_mod_cas(l)-v(l))/nudging_v
1035	IF ( play(l) < p_nudging_t .AND. nint(nudging_t) /= 0 ) &
1036	& d_t_nudge(l)=(temp_nudg_mod_cas(l)-temp(l))/nudging_t
1037	IF ( play(l) < p_nudging_qv .AND. nint(nudging_qv) /= 0 ) &
1038	& d_q_nudge(l,1)=(qv_nudg_mod_cas(l)-q(l,1))/nudging_qv
1039	ENDDO
1040
1041	#ifdef OUTPUT_PHYS_SCM
1042	CALL iophys_ecrit('w_adv',klev,'w_adv','K/day',w_adv)
1043	CALL iophys_ecrit('z_adv',klev,'z_adv','K/day',z_adv)
1044	CALL iophys_ecrit('dtadv',klev,'dtadv','K/day',86400*d_t_adv)
1045	CALL iophys_ecrit('dtdyn',klev,'dtdyn','K/day',86400*d_t_vert_adv)
1046	CALL iophys_ecrit('qv',klev,'qv','g/kg',1000*q(:,1))
1047	CALL iophys_ecrit('qvnud',klev,'qvnud','g/kg',1000*u_nudg_mod_cas)
1048	CALL iophys_ecrit('u',klev,'u','m/s',u)
1049	CALL iophys_ecrit('unud',klev,'unud','m/s',u_nudg_mod_cas)
1050	CALL iophys_ecrit('v',klev,'v','m/s',v)
1051	CALL iophys_ecrit('vnud',klev,'vnud','m/s',v_nudg_mod_cas)
1052	CALL iophys_ecrit('temp',klev,'temp','K',temp)
1053	CALL iophys_ecrit('tempnud',klev,'temp_nudg_mod_cas','K',temp_nudg_mod_cas)
1054	CALL iophys_ecrit('dtnud',klev,'dtnud','K/day',86400*d_t_nudge)
1055	CALL iophys_ecrit('dqnud',klev,'dqnud','K/day',100086400d_q_nudge(:,1))
1056	#endif
1057
1058	!
1059	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1060	!! CONSERVE EN ATTENDANT QUE LE CAS EN QUESTION FONCTIONNE EN STD !!
1061	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1062	! if (forcing_fire) THEN
1063	! print*,'Enlever cette section rapidement'
1064	! stop
1065	!
1066	!
1067	!!let ww=if ( alt le 1100 ) then alt*-0.00001 else 0
1068	!!let wt=if ( alt le 1100 ) then min( -3.75e-5 , -7.5e-8*alt) else 0
1069	!!let wq=if ( alt le 1100 ) then max( 1.5e-8 , 3e-11*alt) else 0
1070	! d_t_adv=0.
1071	! d_q_adv=0.
1072	! teta=temp(pzero/play)*rkappa
1073	! d_t_adv=0.
1074	! d_q_adv=0.
1075	! do l=2,llm-1
1076	! if (zlay(l)<=1100) then
1077	! wwww=-0.00001*zlay(l)
1078	! d_t_adv(l)=-wwww(teta(l)-teta(l+1))/(zlay(l)-zlay(l+1)) /(pzero/play(l))*rkappa
1079	! d_q_adv(l,1:2)=-wwww*(q(l,1:2)-q(l+1,1:2))/(zlay(l)-zlay(l+1))
1080	! d_t_adv(l)=d_t_adv(l)+min(-3.75e-5 , -7.5e-8*zlay(l))
1081	! d_q_adv(l,1)=d_q_adv(l,1)+max( 1.5e-8 , 3e-11*zlay(l))
1082	! endif
1083	! enddo
1084	!
1085	! endif
1086	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1087
1088	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1089	! call writefield_phy('dv_age' ,dv_age,llm)
1090	! call writefield_phy('du_age' ,du_age,llm)
1091	! call writefield_phy('du_phys' ,du_phys,llm)
1092	! call writefield_phy('u_tend' ,u,llm)
1093	! call writefield_phy('u_g' ,ug,llm)
1094	!
1095	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1096	!! Increment state variables
1097	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1098	IF (flag_inhib_forcing == 0) then ! if tendency of forcings should be added
1099
1100	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1101	!! CONSERVE EN ATTENDANT QUE LE CAS EN QUESTION FONCTIONNE EN STD !!
1102	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1103	! pour les cas sandu et astex, on reclacule u,v,q,temp et teta dans 1D_nudge_sandu_astex.h
1104	! au dessus de 700hpa, on relaxe vers les profils initiaux
1105	! if (forcing_sandu .OR. forcing_astex) then
1106	!#include "1D_nudge_sandu_astex.h"
1107	! else
1108	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1109	u(1:mxcalc)=u(1:mxcalc) + timestep*( &
1110	& du_phys(1:mxcalc) &
1111	& +du_age(1:mxcalc)+du_adv(1:mxcalc) &
1112	& +d_u_nudge(1:mxcalc) )
1113	v(1:mxcalc)=v(1:mxcalc) + timestep*( &
1114	& dv_phys(1:mxcalc) &
1115	& +dv_age(1:mxcalc)+dv_adv(1:mxcalc) &
1116	& +d_v_nudge(1:mxcalc) )
1117	q(1:mxcalc,:)=q(1:mxcalc,:)+timestep*( &
1118	& dq(1:mxcalc,:) &
1119	& +d_q_adv(1:mxcalc,:) &
1120	& +d_q_nudge(1:mxcalc,:) )
1121
1122	if (prt_level.ge.3) then
1123	print *, &
1124	& 'physiq-> temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1) ', &
1125	& temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1)
1126	print* ,'dv_phys=',dv_phys
1127	print* ,'dv_age=',dv_age
1128	print* ,'dv_adv=',dv_adv
1129	print* ,'d_v_nudge=',d_v_nudge
1130	print*, v
1131	print*, vg
1132	endif
1133
1134	temp(1:mxcalc)=temp(1:mxcalc)+timestep*( &
1135	& dt_phys(1:mxcalc) &
1136	& +d_t_adv(1:mxcalc) &
1137	& +d_t_nudge(1:mxcalc) &
1138	& +dt_cooling(1:mxcalc)) ! Taux de chauffage ou refroid.
1139
1140
1141	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1142	!! CONSERVE EN ATTENDANT QUE LE CAS EN QUESTION FONCTIONNE EN STD !!
1143	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1144	! endif ! forcing_sandu or forcing_astex
1145	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1146
1147	teta=temp(pzero/play)*rkappa
1148	!
1149	!---------------------------------------------------------------------
1150	! Nudge soil temperature if requested
1151	!---------------------------------------------------------------------
1152
1153	IF (nudge_tsoil .AND. .NOT. lastcall) THEN
1154	ftsoil(1,isoil_nudge,:) = ftsoil(1,isoil_nudge,:) &
1155	& -timestep/tau_soil_nudge*(ftsoil(1,isoil_nudge,:)-Tsoil_nudge)
1156	ENDIF
1157
1158	!---------------------------------------------------------------------
1159	! Add large-scale tendencies (advection, etc) :
1160	!---------------------------------------------------------------------
1161
1162	!cc nrlmd
1163	!cc tmpvar=teta
1164	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1165	!cc
1166	!cc teta(1:mxcalc)=tmpvar(1:mxcalc)
1167	!cc tmpvar(:)=q(:,1)
1168	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1169	!cc q(1:mxcalc,1)=tmpvar(1:mxcalc)
1170	!cc tmpvar(:)=q(:,2)
1171	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1172	!cc q(1:mxcalc,2)=tmpvar(1:mxcalc)
1173
1174	END IF ! end if tendency of tendency should be added
1175
1176	!---------------------------------------------------------------------
1177	! Air temperature :
1178	!---------------------------------------------------------------------
1179	if (lastcall) then
1180	print*,'Pas de temps final ',it
1181	call ju2ymds(daytime, an, mois, jour, heure)
1182	print*,'a la date : a m j h',an, mois, jour ,heure/3600.
1183	endif
1184
1185	! incremente day time
1186	! print*,'daytime bef',daytime,1./day_step
1187	daytime = daytime+1./day_step
1188	!Al1dbg
1189	day = int(daytime+0.1/day_step)
1190	! time = max(daytime-day,0.0)
1191	!Al1&jyg: correction de bug
1192	!cc time = real(mod(it,day_step))/day_step
1193	time = time_ini/24.+real(mod(it,day_step))/day_step
1194	! print*,'daytime nxt time',daytime,time
1195	it=it+1
1196
1197	enddo
1198
1199	!Al1
1200	if (ecrit_slab_oc.ne.-1) close(97)
1201
1202	!Al1 Call to 1D equivalent of dynredem (an,mois,jour,heure ?)
1203	! -------------------------------------
1204	call dyn1dredem("restart1dyn.nc", &
1205	& plev,play,phi,phis,presnivs, &
1206	& u,v,temp,q,omega2)
1207
1208	CALL abort_gcm ('lmdz1d ','The End ',0)
1209
1210	END SUBROUTINE scm

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format