Context Navigation

scm.F90 @ 4296

Last change on this file since 4296 was 4104, checked in by evignon, 3 years ago
modification des routines pour lecture de la v1 des cas 1D au format standard + corrections de bug pour le geopotentiel à la surface
File size: 40.5 KB

Line
1	SUBROUTINE scm
2
3	USE ioipsl, only: ju2ymds, ymds2ju, ioconf_calendar,getin
4	USE phys_state_var_mod, ONLY : phys_state_var_init, phys_state_var_end, &
5	clwcon, detr_therm, &
6	qsol, fevap, z0m, z0h, agesno, &
7	du_gwd_rando, du_gwd_front, entr_therm, f0, fm_therm, &
8	falb_dir, falb_dif, &
9	ftsol, beta_aridity, pbl_tke, pctsrf, radsol, rain_fall, snow_fall, ratqs, &
10	rnebcon, rugoro, sig1, w01, solaire_etat0, sollw, sollwdown, &
11	solsw, solswfdiff, t_ancien, q_ancien, u_ancien, v_ancien, &
12	wake_delta_pbl_TKE, delta_tsurf, wake_fip, wake_pe, &
13	wake_deltaq, wake_deltat, wake_s, wake_dens, &
14	awake_dens, cv_gen, wake_cstar, &
15	zgam, zmax0, zmea, zpic, zsig, &
16	zstd, zthe, zval, ale_bl, ale_bl_trig, alp_bl, ql_ancien, qs_ancien, &
17	prlw_ancien, prsw_ancien, prw_ancien, &
18	u10m,v10m,ale_wake,ale_bl_stat
19
20
21	USE dimphy
22	USE surface_data, only : type_ocean,ok_veget
23	USE pbl_surface_mod, only : ftsoil, pbl_surface_init, &
24	pbl_surface_final
25	USE fonte_neige_mod, only : fonte_neige_init, fonte_neige_final
26
27	USE infotrac ! new
28	USE control_mod
29	USE indice_sol_mod
30	USE phyaqua_mod
31	! USE mod_1D_cases_read
32	USE mod_1D_cases_read_std
33	!USE mod_1D_amma_read
34	USE print_control_mod, ONLY: lunout, prt_level
35	USE iniphysiq_mod, ONLY: iniphysiq
36	USE mod_const_mpi, ONLY: comm_lmdz
37	USE physiq_mod, ONLY: physiq
38	USE comvert_mod, ONLY: presnivs, ap, bp, dpres,nivsig, nivsigs, pa, &
39	preff, aps, bps, pseudoalt, scaleheight
40	USE temps_mod, ONLY: annee_ref, calend, day_end, day_ini, day_ref, &
41	itau_dyn, itau_phy, start_time, year_len
42	USE phys_cal_mod, ONLY : year_len_phys_cal_mod => year_len
43
44	implicit none
45	#include "dimensions.h"
46	#include "YOMCST.h"
47	!!#include "control.h"
48	#include "clesphys.h"
49	#include "dimsoil.h"
50	!#include "indicesol.h"
51
52	#include "compar1d.h"
53	#include "flux_arp.h"
54	#include "date_cas.h"
55	#include "tsoilnudge.h"
56	#include "fcg_gcssold.h"
57	#include "compbl.h"
58
59	!=====================================================================
60	! DECLARATIONS
61	!=====================================================================
62
63	#undef OUTPUT_PHYS_SCM
64
65	!---------------------------------------------------------------------
66	! Externals
67	!---------------------------------------------------------------------
68	external fq_sat
69	real fq_sat
70
71	!---------------------------------------------------------------------
72	! Arguments d' initialisations de la physique (USER DEFINE)
73	!---------------------------------------------------------------------
74
75	integer, parameter :: ngrid=1
76	real :: zcufi = 1.
77	real :: zcvfi = 1.
78	real :: fnday
79	real :: day, daytime
80	real :: day1
81	real :: heure
82	integer :: jour
83	integer :: mois
84	integer :: an
85
86	!---------------------------------------------------------------------
87	! Declarations related to forcing and initial profiles
88	!---------------------------------------------------------------------
89
90	integer :: kmax = llm
91	integer llm700,nq1,nq2
92	INTEGER, PARAMETER :: nlev_max=1000, nqmx=1000
93	real timestep, frac
94	real height(nlev_max),tttprof(nlev_max),qtprof(nlev_max)
95	real uprof(nlev_max),vprof(nlev_max),e12prof(nlev_max)
96	real ugprof(nlev_max),vgprof(nlev_max),wfls(nlev_max)
97	real dqtdxls(nlev_max),dqtdyls(nlev_max)
98	real dqtdtls(nlev_max),thlpcar(nlev_max)
99	real qprof(nlev_max,nqmx)
100
101	! integer :: forcing_type
102	logical :: forcing_les = .false.
103	logical :: forcing_armcu = .false.
104	logical :: forcing_rico = .false.
105	logical :: forcing_radconv = .false.
106	logical :: forcing_toga = .false.
107	logical :: forcing_twpice = .false.
108	logical :: forcing_amma = .false.
109	logical :: forcing_dice = .false.
110	logical :: forcing_gabls4 = .false.
111
112	logical :: forcing_GCM2SCM = .false.
113	logical :: forcing_GCSSold = .false.
114	logical :: forcing_sandu = .false.
115	logical :: forcing_astex = .false.
116	logical :: forcing_fire = .false.
117	logical :: forcing_case = .false.
118	logical :: forcing_case2 = .false.
119	logical :: forcing_SCM = .false.
120
121	!flag forcings
122	logical :: nudge_wind=.true.
123	logical :: nudge_thermo=.false.
124	logical :: cptadvw=.true.
125
126
127	!=====================================================================
128	! DECLARATIONS FOR EACH CASE
129	!=====================================================================
130	!
131	#include "1D_decl_cases.h"
132	!
133	!---------------------------------------------------------------------
134	! Declarations related to nudging
135	!---------------------------------------------------------------------
136	integer :: nudge_max
137	parameter (nudge_max=9)
138	integer :: inudge_RHT=1
139	integer :: inudge_UV=2
140	logical :: nudge(nudge_max)
141	real :: t_targ(llm)
142	real :: rh_targ(llm)
143	real :: u_targ(llm)
144	real :: v_targ(llm)
145	!
146	!---------------------------------------------------------------------
147	! Declarations related to vertical discretization:
148	!---------------------------------------------------------------------
149	real :: pzero=1.e5
150	real :: play (llm),zlay (llm),sig_s(llm),plev(llm+1)
151	real :: playd(llm),zlayd(llm),ap_amma(llm+1),bp_amma(llm+1)
152
153	!---------------------------------------------------------------------
154	! Declarations related to variables
155	!---------------------------------------------------------------------
156
157	real :: phi(llm)
158	real :: teta(llm),tetal(llm),temp(llm),u(llm),v(llm),w(llm)
159	REAL rot(1, llm) ! relative vorticity, in s-1
160	real :: rlat_rad(1),rlon_rad(1)
161	real :: omega(llm),omega2(llm),rho(llm+1)
162	real :: ug(llm),vg(llm),fcoriolis
163	real :: sfdt, cfdt
164	real :: du_phys(llm),dv_phys(llm),dt_phys(llm)
165	real :: w_adv(llm),z_adv(llm)
166	real :: d_t_vert_adv(llm),d_u_vert_adv(llm),d_v_vert_adv(llm)
167	real :: dt_cooling(llm),d_t_adv(llm),d_t_nudge(llm)
168	real :: d_u_nudge(llm),d_v_nudge(llm)
169	! real :: d_u_adv(llm),d_v_adv(llm)
170	real :: d_u_age(llm),d_v_age(llm)
171	real :: alpha
172	real :: ttt
173
174	REAL, ALLOCATABLE, DIMENSION(:,:):: q
175	REAL, ALLOCATABLE, DIMENSION(:,:):: dq
176	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_vert_adv
177	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_adv
178	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_nudge
179	! REAL, ALLOCATABLE, DIMENSION(:):: d_th_adv
180
181	!---------------------------------------------------------------------
182	! Initialization of surface variables
183	!---------------------------------------------------------------------
184	real :: run_off_lic_0(1)
185	real :: fder(1),snsrf(1,nbsrf),qsurfsrf(1,nbsrf)
186	real :: tsoil(1,nsoilmx,nbsrf)
187	! real :: agesno(1,nbsrf)
188
189	!---------------------------------------------------------------------
190	! Call to phyredem
191	!---------------------------------------------------------------------
192	logical :: ok_writedem =.true.
193	real :: sollw_in = 0.
194	real :: solsw_in = 0.
195
196	!---------------------------------------------------------------------
197	! Call to physiq
198	!---------------------------------------------------------------------
199	logical :: firstcall=.true.
200	logical :: lastcall=.false.
201	real :: phis(1) = 0.0
202	real :: dpsrf(1)
203
204	!---------------------------------------------------------------------
205	! Initializations of boundary conditions
206	!---------------------------------------------------------------------
207	real, allocatable :: phy_nat (:) ! 0=ocean libre,1=land,2=glacier,3=banquise
208	real, allocatable :: phy_alb (:) ! Albedo land only (old value condsurf_jyg=0.3)
209	real, allocatable :: phy_sst (:) ! SST (will not be used; cf read_tsurf1d.F)
210	real, allocatable :: phy_bil (:) ! Ne sert que pour les slab_ocean
211	real, allocatable :: phy_rug (:) ! Longueur rugosite utilisee sur land only
212	real, allocatable :: phy_ice (:) ! Fraction de glace
213	real, allocatable :: phy_fter(:) ! Fraction de terre
214	real, allocatable :: phy_foce(:) ! Fraction de ocean
215	real, allocatable :: phy_fsic(:) ! Fraction de glace
216	real, allocatable :: phy_flic(:) ! Fraction de glace
217
218	!---------------------------------------------------------------------
219	! Fichiers et d'autres variables
220	!---------------------------------------------------------------------
221	integer :: k,l,i,it=1,mxcalc
222	integer :: nsrf
223	integer jcode
224	INTEGER read_climoz
225	!
226	integer :: it_end ! iteration number of the last call
227	!Al1,plev,play,phi,phis,presnivs,
228	integer ecrit_slab_oc !1=ecrit,-1=lit,0=no file
229	data ecrit_slab_oc/-1/
230	!
231	! if flag_inhib_forcing = 0, tendencies of forcing are added
232	! <> 0, tendencies of forcing are not added
233	INTEGER :: flag_inhib_forcing = 0
234
235
236	print*,'VOUS ENTREZ DANS LE 1D FORMAT STANDARD'
237
238	!=====================================================================
239	! INITIALIZATIONS
240	!=====================================================================
241	du_phys(:)=0.
242	dv_phys(:)=0.
243	dt_phys(:)=0.
244	d_t_vert_adv(:)=0.
245	d_u_vert_adv(:)=0.
246	d_v_vert_adv(:)=0.
247	dt_cooling(:)=0.
248	d_t_adv(:)=0.
249	d_t_nudge(:)=0.
250	d_u_nudge(:)=0.
251	d_v_nudge(:)=0.
252	d_u_adv(:)=0.
253	d_v_adv(:)=0.
254	d_u_age(:)=0.
255	d_v_age(:)=0.
256
257
258	! Initialization of Common turb_forcing
259	dtime_frcg = 0.
260	Turb_fcg_gcssold=.false.
261	hthturb_gcssold = 0.
262	hqturb_gcssold = 0.
263
264
265
266
267	!---------------------------------------------------------------------
268	! OPTIONS OF THE 1D SIMULATION (lmdz1d.def => unicol.def)
269	!---------------------------------------------------------------------
270	call conf_unicol
271	!Al1 moves this gcssold var from common fcg_gcssold to
272	Turb_fcg_gcssold = xTurb_fcg_gcssold
273	! --------------------------------------------------------------------
274	close(1)
275	write(,) 'lmdz1d.def lu => unicol.def'
276
277	forcing_SCM = .true.
278	year_ini_cas=1997
279	! It is possible that those parameters are run twice.
280	! A REVOIR : LIRE PEUT ETRE AN MOIS JOUR DIRECETEMENT
281
282
283	call getin('anneeref',year_ini_cas)
284	call getin('dayref',day_deb)
285	mth_ini_cas=1 ! pour le moment on compte depuis le debut de l'annee
286	call getin('time_ini',heure_ini_cas)
287
288	print*,'NATURE DE LA SURFACE ',nat_surf
289	!
290	! Initialization of the logical switch for nudging
291
292	jcode = iflag_nudge
293	do i = 1,nudge_max
294	nudge(i) = mod(jcode,10) .ge. 1
295	jcode = jcode/10
296	enddo
297	!-----------------------------------------------------------------------
298	! Definition of the run
299	!-----------------------------------------------------------------------
300
301	call conf_gcm( 99, .TRUE. )
302
303	!-----------------------------------------------------------------------
304	allocate( phy_nat (year_len)) ! 0=ocean libre,1=land,2=glacier,3=banquise
305	phy_nat(:)=0.0
306	allocate( phy_alb (year_len)) ! Albedo land only (old value condsurf_jyg=0.3)
307	allocate( phy_sst (year_len)) ! SST (will not be used; cf read_tsurf1d.F)
308	allocate( phy_bil (year_len)) ! Ne sert que pour les slab_ocean
309	phy_bil(:)=1.0
310	allocate( phy_rug (year_len)) ! Longueur rugosite utilisee sur land only
311	allocate( phy_ice (year_len)) ! Fraction de glace
312	phy_ice(:)=0.0
313	allocate( phy_fter(year_len)) ! Fraction de terre
314	phy_fter(:)=0.0
315	allocate( phy_foce(year_len)) ! Fraction de ocean
316	phy_foce(:)=0.0
317	allocate( phy_fsic(year_len)) ! Fraction de glace
318	phy_fsic(:)=0.0
319	allocate( phy_flic(year_len)) ! Fraction de glace
320	phy_flic(:)=0.0
321
322
323	!-----------------------------------------------------------------------
324	! Choix du calendrier
325	! -------------------
326
327	! calend = 'earth_365d'
328	if (calend == 'earth_360d') then
329	call ioconf_calendar('360d')
330	write(,)'CALENDRIER CHOISI: Terrestre a 360 jours/an'
331	else if (calend == 'earth_365d') then
332	call ioconf_calendar('noleap')
333	write(,)'CALENDRIER CHOISI: Terrestre a 365 jours/an'
334	else if (calend == 'earth_366d') then
335	call ioconf_calendar('all_leap')
336	write(,)'CALENDRIER CHOISI: Terrestre bissextile'
337	else if (calend == 'gregorian') then
338	stop 'gregorian calend should not be used by normal user'
339	call ioconf_calendar('gregorian') ! not to be used by normal users
340	write(,)'CALENDRIER CHOISI: Gregorien'
341	else
342	write (,) 'ERROR : unknown calendar ', calend
343	stop 'calend should be 360d,earth_365d,earth_366d,gregorian'
344	endif
345	!-----------------------------------------------------------------------
346	!
347	!c Date :
348	! La date est supposee donnee sous la forme [annee, numero du jour dans
349	! l annee] ; l heure est donnee dans time_ini, lu dans lmdz1d.def.
350	! On appelle ymds2ju pour convertir [annee, jour] en [jour Julien].
351	! Le numero du jour est dans "day". L heure est traitee separement.
352	! La date complete est dans "daytime" (l'unite est le jour).
353
354
355	if (nday>0) then
356	fnday=nday
357	else
358	fnday=-nday/float(day_step)
359	endif
360	print *,'fnday=',fnday
361	! start_time doit etre en FRACTION DE JOUR
362	start_time=time_ini/24.
363
364	annee_ref = anneeref
365	mois = 1
366	day_ref = dayref
367	heure = 0.
368	itau_dyn = 0
369	itau_phy = 0
370	call ymds2ju(annee_ref,mois,day_ref,heure,day)
371	day_ini = int(day)
372	day_end = day_ini + int(fnday)
373
374	! Convert the initial date to Julian day
375	day_ini_cas=day_deb
376	print*,'time case',year_ini_cas,mth_ini_cas,day_ini_cas
377	call ymds2ju &
378	& (year_ini_cas,mth_ini_cas,day_ini_cas,heure_ini_cas*3600 &
379	& ,day_ju_ini_cas)
380	print*,'time case 2',day_ini_cas,day_ju_ini_cas
381	daytime = day + heure_ini_cas/24. ! 1st day and initial time of the simulation
382
383	! Print out the actual date of the beginning of the simulation :
384	call ju2ymds(daytime,year_print, month_print,day_print,sec_print)
385	print *,' Time of beginning : ', &
386	& year_print, month_print, day_print, sec_print
387
388	!---------------------------------------------------------------------
389	! Initialization of dimensions, geometry and initial state
390	!---------------------------------------------------------------------
391	! call init_phys_lmdz(1,1,llm,1,(/1/)) ! job now done via iniphysiq
392	! but we still need to initialize dimphy module (klon,klev,etc.) here.
393	call init_dimphy1D(1,llm)
394	call suphel
395	call infotrac_init
396
397	if (nqtot>nqmx) STOP 'Augmenter nqmx dans lmdz1d.F'
398	allocate(q(llm,nqtot)) ; q(:,:)=0.
399	allocate(dq(llm,nqtot))
400	allocate(d_q_vert_adv(llm,nqtot))
401	allocate(d_q_adv(llm,nqtot))
402	allocate(d_q_nudge(llm,nqtot))
403	! allocate(d_th_adv(llm))
404
405	q(:,:) = 0.
406	dq(:,:) = 0.
407	d_q_vert_adv(:,:) = 0.
408	d_q_adv(:,:) = 0.
409	d_q_nudge(:,:) = 0.
410
411	!
412	! No ozone climatology need be read in this pre-initialization
413	! (phys_state_var_init is called again in physiq)
414	read_climoz = 0
415	nsw=6
416
417	call phys_state_var_init(read_climoz)
418
419	if (ngrid.ne.klon) then
420	print*,'stop in inifis'
421	print*,'Probleme de dimensions :'
422	print*,'ngrid = ',ngrid
423	print*,'klon = ',klon
424	stop
425	endif
426	!!!=====================================================================
427	!!! Feedback forcing values for Gateaux differentiation (al1)
428	!!!=====================================================================
429	!!
430	qsol = qsolinp
431	qsurf = fq_sat(tsurf,psurf/100.)
432	beta_aridity(:,:) = beta_surf
433	day1= day_ini
434	time=daytime-day
435	ts_toga(1)=tsurf ! needed by read_tsurf1d.F
436	rho(1)=psurf/(rdtsurf(1.+(rv/rd-1.)*qsurf))
437
438	!
439	!! mpl et jyg le 22/08/2012 :
440	!! pour que les cas a flux de surface imposes marchent
441	IF(.NOT.ok_flux_surf.or.max(abs(wtsurf),abs(wqsurf))>0.) THEN
442	fsens=-wtsurfrcpdrho(1)
443	flat=-wqsurfrlvttrho(1)
444	print *,'Flux: ok_flux wtsurf wqsurf',ok_flux_surf,wtsurf,wqsurf
445	ENDIF
446	print*,'Flux sol ',fsens,flat
447
448	! Vertical discretization and pressure levels at half and mid levels:
449
450	pa = 5e4
451	!! preff= 1.01325e5
452	preff = psurf
453	IF (ok_old_disvert) THEN
454	call disvert0(pa,preff,ap,bp,dpres,presnivs,nivsigs,nivsig)
455	print *,'On utilise disvert0'
456	aps(1:llm)=0.5*(ap(1:llm)+ap(2:llm+1))
457	bps(1:llm)=0.5*(bp(1:llm)+bp(2:llm+1))
458	scaleheight=8.
459	pseudoalt(1:llm)=-scaleheight*log(presnivs(1:llm)/preff)
460	ELSE
461	call disvert()
462	print *,'On utilise disvert'
463	! Nouvelle version disvert permettant d imposer ap,bp (modif L.Guez) MPL 18092012
464	! Dans ce cas, on lit ap,bp dans le fichier hybrid.txt
465	ENDIF
466
467	sig_s=presnivs/preff
468	plev =ap+bp*psurf
469	play = 0.5*(plev(1:llm)+plev(2:llm+1))
470	zlay=-rd300.log(play/psurf)/rg ! moved after reading profiles.
471
472	IF (forcing_type .eq. 59) THEN
473	! pour forcing_sandu, on cherche l'indice le plus proche de 700hpa#3000m
474	write(,) '***********************'
475	do l = 1, llm
476	write(,) 'l,play(l),presnivs(l): ',l,play(l),presnivs(l)
477	if (trouve_700 .and. play(l).le.70000) then
478	llm700=l
479	print *,'llm700,play=',llm700,play(l)/100.
480	trouve_700= .false.
481	endif
482	enddo
483	write(,) '***********************'
484	ENDIF
485
486	!
487	!=====================================================================
488	! EVENTUALLY, READ FORCING DATA :
489	!=====================================================================
490
491	#include "1D_read_forc_cases.h"
492	print,'A d_t_adv ',d_t_adv(1:20)86400
493
494	if (forcing_GCM2SCM) then
495	write (,) 'forcing_GCM2SCM not yet implemented'
496	stop 'in initialization'
497	endif ! forcing_GCM2SCM
498
499	print*,'mxcalc=',mxcalc
500	! print*,'zlay=',zlay(mxcalc)
501	! print*,'play=',play(mxcalc)
502
503	!! When surface temperature is forced
504	tg= tsurf ! surface T used in read_tsurf1d
505
506
507	!=====================================================================
508	! Initialisation de la physique :
509	!=====================================================================
510
511	! Rq: conf_phys.F90 lit tous les flags de physiq.def; conf_phys appele depuis physiq.F
512	!
513	! day_step, iphysiq lus dans gcm.def ci-dessus
514	! timestep: calcule ci-dessous from rday et day_step
515	! ngrid=1
516	! llm: defini dans .../modipsl/modeles/LMDZ4/libf/grid/dimension
517	! rday: defini dans suphel.F (86400.)
518	! day_ini: lu dans run.def (dayref)
519	! rlat_rad,rlon-rad: transformes en radian de rlat,rlon lus dans lmdz1d.def (en degres)
520	! airefi,zcufi,zcvfi initialises au debut de ce programme
521	! rday,ra,rg,rd,rcpd declares dans YOMCST.h et calcules dans suphel.F
522
523
524	day_step = float(nsplit_phys)*day_step/float(iphysiq)
525	write (,) 'Time step divided by nsplit_phys (=',nsplit_phys,')'
526	timestep =rday/day_step
527	dtime_frcg = timestep
528	!
529	zcufi=airefi
530	zcvfi=airefi
531	!
532	rlat_rad(1)=xlat*rpi/180.
533	rlon_rad(1)=xlon*rpi/180.
534
535	! iniphysiq will call iniaqua who needs year_len from phys_cal_mod
536	year_len_phys_cal_mod=year_len
537
538	! Ehouarn: iniphysiq requires arrays related to (3D) dynamics grid,
539	! e.g. for cell boundaries, which are meaningless in 1D; so pad these
540	! with '0.' when necessary
541
542	call iniphysiq(iim,jjm,llm, &
543	1,comm_lmdz, &
544	rday,day_ini,timestep, &
545	(/rlat_rad(1),0./),(/0./), &
546	(/0.,0./),(/rlon_rad(1),0./), &
547	(/ (/airefi,0./),(/0.,0./) /), &
548	(/zcufi,0.,0.,0./), &
549	(/zcvfi,0./), &
550	ra,rg,rd,rcpd,1)
551	print*,'apres iniphysiq'
552
553	! 2 PARAMETRES QUI DEVRAIENT ETRE LUS DANS run.def MAIS NE LE SONT PAS ICI:
554	co2_ppm= 330.0
555	solaire=1370.0
556
557	! Ecriture du startphy avant le premier appel a la physique.
558	! On le met juste avant pour avoir acces a tous les champs
559
560	if (ok_writedem) then
561
562	!--------------------------------------------------------------------------
563	! pbl_surface_init (called here) and pbl_surface_final (called by phyredem)
564	! need : qsol fder snow qsurf evap rugos agesno ftsoil
565	!--------------------------------------------------------------------------
566
567	type_ocean = "force"
568	run_off_lic_0(1) = restart_runoff
569	call fonte_neige_init(run_off_lic_0)
570
571	fder=0.
572	snsrf(1,:)=snowmass ! masse de neige des sous surface
573	qsurfsrf(1,:)=qsurf ! humidite de l'air des sous surface
574	fevap=0.
575	z0m(1,:)=rugos ! couverture de neige des sous surface
576	z0h(1,:)=rugosh ! couverture de neige des sous surface
577	agesno = xagesno
578	tsoil(:,:,:)=tsurf
579	!------ AMMA 2e run avec modele sol et rayonnement actif (MPL 23052012)
580	! tsoil(1,1,1)=299.18
581	! tsoil(1,2,1)=300.08
582	! tsoil(1,3,1)=301.88
583	! tsoil(1,4,1)=305.48
584	! tsoil(1,5,1)=308.00
585	! tsoil(1,6,1)=308.00
586	! tsoil(1,7,1)=308.00
587	! tsoil(1,8,1)=308.00
588	! tsoil(1,9,1)=308.00
589	! tsoil(1,10,1)=308.00
590	! tsoil(1,11,1)=308.00
591	!-----------------------------------------------------------------------
592	call pbl_surface_init(fder, snsrf, qsurfsrf, tsoil)
593
594	!------------------ prepare limit conditions for limit.nc -----------------
595	!-- Ocean force
596
597	print*,'avant phyredem'
598	pctsrf(1,:)=0.
599	if (nat_surf.eq.0.) then
600	pctsrf(1,is_oce)=1.
601	pctsrf(1,is_ter)=0.
602	pctsrf(1,is_lic)=0.
603	pctsrf(1,is_sic)=0.
604	else if (nat_surf .eq. 1) then
605	pctsrf(1,is_oce)=0.
606	pctsrf(1,is_ter)=1.
607	pctsrf(1,is_lic)=0.
608	pctsrf(1,is_sic)=0.
609	else if (nat_surf .eq. 2) then
610	pctsrf(1,is_oce)=0.
611	pctsrf(1,is_ter)=0.
612	pctsrf(1,is_lic)=1.
613	pctsrf(1,is_sic)=0.
614	else if (nat_surf .eq. 3) then
615	pctsrf(1,is_oce)=0.
616	pctsrf(1,is_ter)=0.
617	pctsrf(1,is_lic)=0.
618	pctsrf(1,is_sic)=1.
619
620	end if
621
622
623	print*,'nat_surf,pctsrf(1,is_oce),pctsrf(1,is_ter)',nat_surf &
624	& ,pctsrf(1,is_oce),pctsrf(1,is_ter)
625
626	zmasq=pctsrf(1,is_ter)+pctsrf(1,is_lic)
627	zpic = zpicinp
628	ftsol=tsurf
629	falb_dir=albedo
630	falb_dif=albedo
631	rugoro=rugos
632	t_ancien(1,:)=temp(:)
633	q_ancien(1,:)=q(:,1)
634	ql_ancien = 0.
635	qs_ancien = 0.
636	prlw_ancien = 0.
637	prsw_ancien = 0.
638	prw_ancien = 0.
639	!jyg<
640	! Etienne: comment those lines since now the TKE is inialized in 1D_read_forc_cases
641	!! pbl_tke(:,:,:)=1.e-8
642	! pbl_tke(:,:,:)=0.
643	! pbl_tke(:,2,:)=1.e-2
644	!>jyg
645	rain_fall=0.
646	snow_fall=0.
647	solsw=0.
648	solswfdiff=0.
649	sollw=0.
650	sollwdown=rsigmatsurf*4
651	radsol=0.
652	rnebcon=0.
653	ratqs=0.
654	clwcon=0.
655	zmax0 = 0.
656	zmea=zsurf
657	zstd=0.
658	zsig=0.
659	zgam=0.
660	zval=0.
661	zthe=0.
662	sig1=0.
663	w01=0.
664	!
665	wake_deltaq = 0.
666	wake_deltat = 0.
667	wake_delta_pbl_TKE(:,:,:) = 0.
668	delta_tsurf = 0.
669	wake_fip = 0.
670	wake_pe = 0.
671	wake_s = 0.
672	wake_dens = 0.
673	awake_dens = 0.
674	cv_gen = 0.
675	wake_cstar = 0.
676	ale_bl = 0.
677	ale_bl_trig = 0.
678	alp_bl = 0.
679	IF (ALLOCATED(du_gwd_rando)) du_gwd_rando = 0.
680	IF (ALLOCATED(du_gwd_front)) du_gwd_front = 0.
681	entr_therm = 0.
682	detr_therm = 0.
683	f0 = 0.
684	fm_therm = 0.
685	u_ancien(1,:)=u(:)
686	v_ancien(1,:)=v(:)
687
688	u10m=0.
689	v10m=0.
690	ale_wake=0.
691	ale_bl_stat=0.
692
693	!------------------------------------------------------------------------
694	! Make file containing restart for the physics (startphy.nc)
695	!
696	! NB: List of the variables to be written by phyredem (via put_field):
697	! rlon,rlat,zmasq,pctsrf(:,is_ter),pctsrf(:,is_lic),pctsrf(:,is_oce)
698	! pctsrf(:,is_sic),ftsol(:,nsrf),tsoil(:,isoil,nsrf),qsurf(:,nsrf)
699	! qsol,falb_dir(:,nsrf),falb_dif(:,nsrf),evap(:,nsrf),snow(:,nsrf)
700	! radsol,solsw,solswfdiff,sollw, sollwdown,fder,rain_fall,snow_fall,frugs(:,nsrf)
701	! agesno(:,nsrf),zmea,zstd,zsig,zgam,zthe,zpic,zval,rugoro
702	! t_ancien,q_ancien,,frugs(:,is_oce),clwcon(:,1),rnebcon(:,1),ratqs(:,1)
703	! run_off_lic_0,pbl_tke(:,1:klev,nsrf), zmax0,f0,sig1,w01
704	! wake_deltat,wake_deltaq,wake_s,wake_dens,awake_dens,cv_gen,wake_cstar,
705	! wake_fip,wake_delta_pbl_tke(:,1:klev,nsrf)
706	!
707	! NB2: The content of the startphy.nc file depends on some flags defined in
708	! the ".def" files. However, since conf_phys is not called in lmdz1d.F90, these flags have
709	! to be set at some arbitratry convenient values.
710	!------------------------------------------------------------------------
711	!Al1 =============== restart option ======================================
712	if (.not.restart) then
713	iflag_pbl = 5
714	call phyredem ("startphy.nc")
715	else
716	! (desallocations)
717	print*,'callin surf final'
718	call pbl_surface_final( fder, snsrf, qsurfsrf, tsoil)
719	print*,'after surf final'
720	CALL fonte_neige_final(run_off_lic_0)
721	endif
722
723	ok_writedem=.false.
724	print*,'apres phyredem'
725
726	endif ! ok_writedem
727
728	!------------------------------------------------------------------------
729	! Make file containing boundary conditions (limit.nc) Al1->restartdyn*
730	! --------------------------------------------------
731	! NB: List of the variables to be written in limit.nc
732	! (by writelim.F, subroutine of 1DUTILS.h):
733	! phy_nat,phy_alb,phy_sst,phy_bil,phy_rug,phy_ice,
734	! phy_fter,phy_foce,phy_flic,phy_fsic)
735	!------------------------------------------------------------------------
736	do i=1,year_len
737	phy_nat(i) = nat_surf
738	phy_alb(i) = albedo
739	phy_sst(i) = tsurf ! read_tsurf1d will be used instead
740	phy_rug(i) = rugos
741	phy_fter(i) = pctsrf(1,is_ter)
742	phy_foce(i) = pctsrf(1,is_oce)
743	phy_fsic(i) = pctsrf(1,is_sic)
744	phy_flic(i) = pctsrf(1,is_lic)
745	enddo
746
747	! fabrication de limit.nc
748	call writelim (1,phy_nat,phy_alb,phy_sst,phy_bil,phy_rug, &
749	& phy_ice,phy_fter,phy_foce,phy_flic,phy_fsic)
750
751
752	call phys_state_var_end
753	!Al1
754	if (restart) then
755	print*,'call to restart dyn 1d'
756	Call dyn1deta0("start1dyn.nc",plev,play,phi,phis,presnivs, &
757	& u,v,temp,q,omega2)
758
759	print*,'fnday,annee_ref,day_ref,day_ini', &
760	& fnday,annee_ref,day_ref,day_ini
761	!** call ymds2ju(annee_ref,mois,day_ini,heure,day)
762	day = day_ini
763	day_end = day_ini + nday
764	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
765
766	! Print out the actual date of the beginning of the simulation :
767	call ju2ymds(daytime, an, mois, jour, heure)
768	print *,' Time of beginning : y m d h',an, mois,jour,heure/3600.
769
770	day = int(daytime)
771	time=daytime-day
772
773	print,'*** intialised fields from restart1dyn *****'
774	print*,'plev,play,phi,phis,presnivs,u,v,temp,q,omega2'
775	print*,'temp(1),q(1,1),u(1),v(1),plev(1),phis :'
776	print*,temp(1),q(1,1),u(1),v(1),plev(1),phis(1)
777	! raz for safety
778	do l=1,llm
779	d_q_vert_adv(l,1) = 0.
780	enddo
781	endif
782	!====================== end restart =================================
783	IF (ecrit_slab_oc.eq.1) then
784	open(97,file='div_slab.dat',STATUS='UNKNOWN')
785	elseif (ecrit_slab_oc.eq.0) then
786	open(97,file='div_slab.dat',STATUS='OLD')
787	endif
788	!
789	!=====================================================================
790	#ifdef OUTPUT_PHYS_SCM
791	CALL iophys_ini(timestep)
792	#endif
793
794	!=====================================================================
795	! START OF THE TEMPORAL LOOP :
796	!=====================================================================
797
798	it_end = nint(fnday*day_step)
799	do while(it.le.it_end)
800
801	if (prt_level.ge.1) then
802	print*,'XXXXXXXXXXXXXXXXXXX ITAP,day,time=', &
803	& it,day,time,it_end,day_step
804	print*,'PAS DE TEMPS ',timestep
805	endif
806	if (it.eq.it_end) lastcall=.True.
807
808	!---------------------------------------------------------------------
809	! Interpolation of forcings in time and onto model levels
810	!---------------------------------------------------------------------
811
812	#include "1D_interp_cases.h"
813
814	!---------------------------------------------------------------------
815	! Geopotential :
816	!---------------------------------------------------------------------
817	phis(1)=zsurf*RG
818	! phi(1)=phis(1)+RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
819
820	! Calculate geopotential from the ground surface since phi and phis are added in physiq_mod
821	phi(1)=RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
822
823	do l = 1, llm-1
824	phi(l+1)=phi(l)+RD(temp(l)+temp(l+1)) &
825	& (play(l)-play(l+1))/(play(l)+play(l+1))
826	enddo
827
828	!---------------------------------------------------------------------
829	! Vertical advection
830	!---------------------------------------------------------------------
831
832	IF ( forc_w+forc_omega > 0 ) THEN
833
834	IF ( forc_w == 1 ) THEN
835	w_adv=w_mod_cas
836	z_adv=phi/RG
837	ELSE
838	w_adv=omega
839	z_adv=play
840	ENDIF
841
842	teta=temp(pzero/play)*rkappa
843	do l=2,llm-1
844	! vertical tendencies computed as d X / d t = -W d X / d z
845	d_u_vert_adv(l)=-w_adv(l)*(u(l+1)-u(l-1))/(z_adv(l+1)-z_adv(l-1))
846	d_v_vert_adv(l)=-w_adv(l)*(v(l+1)-v(l-1))/(z_adv(l+1)-z_adv(l-1))
847	! d theta / dt = -W d theta / d z, transformed into d temp / d t dividing by (pzero/play(l))**rkappa
848	d_t_vert_adv(l)=-w_adv(l)(teta(l+1)-teta(l-1))/(z_adv(l+1)-z_adv(l-1)) / (pzero/play(l))*rkappa
849	d_q_vert_adv(l,1)=-w_adv(l)*(q(l+1,1)-q(l-1,1))/(z_adv(l+1)-z_adv(l-1))
850	enddo
851	d_u_adv(:)=d_u_adv(:)+d_u_vert_adv(:)
852	d_v_adv(:)=d_v_adv(:)+d_v_vert_adv(:)
853	d_t_adv(:)=d_t_adv(:)+d_t_vert_adv(:)
854	d_q_adv(:,1)=d_q_adv(:,1)+d_q_vert_adv(:,1)
855
856	ENDIF
857
858	!---------------------------------------------------------------------
859	! Listing output for debug prt_level>=1
860	!---------------------------------------------------------------------
861	if (prt_level>=1) then
862	print *,' avant physiq : -------- day time ',day,time
863	write(,) 'firstcall,lastcall,phis', &
864	& firstcall,lastcall,phis
865	end if
866	if (prt_level>=5) then
867	write(*,'(a10,2a4,4a13)') 'BEFOR1 IT=','it','l', &
868	& 'presniv','plev','play','phi'
869	write(*,'(a10,2i4,4f13.2)') ('BEFOR1 IT= ',it,l, &
870	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
871	write(*,'(a11,2a4,a11,6a8)') 'BEFOR2','it','l', &
872	& 'presniv','u','v','temp','q1','q2','omega2'
873	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('BEFOR2 IT= ',it,l, &
874	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
875	endif
876
877	!---------------------------------------------------------------------
878	! Call physiq :
879	!---------------------------------------------------------------------
880	call physiq(ngrid,llm, &
881	firstcall,lastcall,timestep, &
882	plev,play,phi,phis,presnivs, &
883	u,v, rot, temp,q,omega2, &
884	du_phys,dv_phys,dt_phys,dq,dpsrf)
885	firstcall=.false.
886
887	!---------------------------------------------------------------------
888	! Listing output for debug
889	!---------------------------------------------------------------------
890	if (prt_level>=5) then
891	write(*,'(a11,2a4,4a13)') 'AFTER1 IT=','it','l', &
892	& 'presniv','plev','play','phi'
893	write(*,'(a11,2i4,4f13.2)') ('AFTER1 it= ',it,l, &
894	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
895	write(*,'(a11,2a4,a11,6a8)') 'AFTER2','it','l', &
896	& 'presniv','u','v','temp','q1','q2','omega2'
897	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('AFTER2 it= ',it,l, &
898	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
899	write(*,'(a11,2a4,a11,5a8)') 'AFTER3','it','l', &
900	& 'presniv','du_phys','dv_phys','dt_phys','dq1','dq2'
901	write(*,'(a11,2i4,f11.2,5f8.2)') ('AFTER3 it= ',it,l, &
902	& presnivs(l),86400du_phys(l),86400dv_phys(l), &
903	& 86400dt_phys(l),86400dq(l,1),dq(l,2),l=1,llm)
904	write(,) 'dpsrf',dpsrf
905	endif
906	!---------------------------------------------------------------------
907	! Add physical tendencies :
908	!---------------------------------------------------------------------
909
910	fcoriolis=2.sin(rpixlat/180.)*romega
911
912	IF (prt_level >= 5) print*, 'fcoriolis, xlat,mxcalc ', &
913	fcoriolis, xlat,mxcalc
914
915	!---------------------------------------------------------------------
916	! Geostrophic forcing
917	!---------------------------------------------------------------------
918
919	IF ( forc_geo == 0 ) THEN
920	d_u_age(1:mxcalc)=0.
921	d_v_age(1:mxcalc)=0.
922	ELSE
923	sfdt = sin(0.5fcoriolistimestep)
924	cfdt = cos(0.5fcoriolistimestep)
925
926	d_u_age(1:mxcalc)= -2.sfdt/timestep &
927	& (sfdt*(u(1:mxcalc)-ug(1:mxcalc)) - &
928	& cfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
929	!! : fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
930	!
931	d_v_age(1:mxcalc)= -2.sfdt/timestep &
932	& (cfdt*(u(1:mxcalc)-ug(1:mxcalc)) + &
933	& sfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
934	!! : -fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
935	ENDIF
936	!
937	!---------------------------------------------------------------------
938	! Nudging
939	! EV: rewrite the section to account for a time- and height-varying
940	! nudging
941	!---------------------------------------------------------------------
942	d_t_nudge(:) = 0.
943	d_u_nudge(:) = 0.
944	d_v_nudge(:) = 0.
945	d_q_nudge(:,:) = 0.
946
947	DO l=1,llm
948
949	IF (nudging_u .LT. 0) THEN
950
951	d_u_nudge(l)=(u_nudg_mod_cas(l)-u(l))*invtau_u_nudg_mod_cas(l)
952
953	ELSE
954
955	IF ( play(l) < p_nudging_u .AND. nint(nudging_u) /= 0 ) &
956	& d_u_nudge(l)=(u_nudg_mod_cas(l)-u(l))/nudging_u
957
958	ENDIF
959
960
961	IF (nudging_v .LT. 0) THEN
962
963	d_v_nudge(l)=(v_nudg_mod_cas(l)-v(l))*invtau_v_nudg_mod_cas(l)
964
965	ELSE
966
967
968	IF ( play(l) < p_nudging_v .AND. nint(nudging_v) /= 0 ) &
969	& d_v_nudge(l)=(v_nudg_mod_cas(l)-v(l))/nudging_v
970
971	ENDIF
972
973
974	IF (nudging_t .LT. 0) THEN
975
976	d_t_nudge(l)=(temp_nudg_mod_cas(l)-temp(l))*invtau_temp_nudg_mod_cas(l)
977
978	ELSE
979
980
981	IF ( play(l) < p_nudging_t .AND. nint(nudging_t) /= 0 ) &
982	& d_t_nudge(l)=(temp_nudg_mod_cas(l)-temp(l))/nudging_t
983
984	ENDIF
985
986
987	IF (nudging_qv .LT. 0) THEN
988
989	d_q_nudge(l,1)=(qv_nudg_mod_cas(l)-q(l,1))*invtau_qv_nudg_mod_cas(l)
990
991	ELSE
992
993	IF ( play(l) < p_nudging_qv .AND. nint(nudging_qv) /= 0 ) &
994	& d_q_nudge(l,1)=(qv_nudg_mod_cas(l)-q(l,1))/nudging_qv
995
996	ENDIF
997
998	ENDDO
999
1000	!---------------------------------------------------------------------
1001	! Optional outputs
1002	!---------------------------------------------------------------------
1003
1004	#ifdef OUTPUT_PHYS_SCM
1005	CALL iophys_ecrit('w_adv',klev,'w_adv','K/day',w_adv)
1006	CALL iophys_ecrit('z_adv',klev,'z_adv','K/day',z_adv)
1007	CALL iophys_ecrit('dtadv',klev,'dtadv','K/day',86400*d_t_adv)
1008	CALL iophys_ecrit('dtdyn',klev,'dtdyn','K/day',86400*d_t_vert_adv)
1009	CALL iophys_ecrit('qv',klev,'qv','g/kg',1000*q(:,1))
1010	CALL iophys_ecrit('qvnud',klev,'qvnud','g/kg',1000*u_nudg_mod_cas)
1011	CALL iophys_ecrit('u',klev,'u','m/s',u)
1012	CALL iophys_ecrit('unud',klev,'unud','m/s',u_nudg_mod_cas)
1013	CALL iophys_ecrit('v',klev,'v','m/s',v)
1014	CALL iophys_ecrit('vnud',klev,'vnud','m/s',v_nudg_mod_cas)
1015	CALL iophys_ecrit('temp',klev,'temp','K',temp)
1016	CALL iophys_ecrit('tempnud',klev,'temp_nudg_mod_cas','K',temp_nudg_mod_cas)
1017	CALL iophys_ecrit('dtnud',klev,'dtnud','K/day',86400*d_t_nudge)
1018	CALL iophys_ecrit('dqnud',klev,'dqnud','K/day',100086400d_q_nudge(:,1))
1019	#endif
1020
1021	IF (flag_inhib_forcing == 0) then ! if tendency of forcings should be added
1022
1023	u(1:mxcalc)=u(1:mxcalc) + timestep*( &
1024	& du_phys(1:mxcalc) &
1025	& +d_u_age(1:mxcalc)+d_u_adv(1:mxcalc) &
1026	& +d_u_nudge(1:mxcalc) )
1027	v(1:mxcalc)=v(1:mxcalc) + timestep*( &
1028	& dv_phys(1:mxcalc) &
1029	& +d_v_age(1:mxcalc)+d_v_adv(1:mxcalc) &
1030	& +d_v_nudge(1:mxcalc) )
1031	q(1:mxcalc,:)=q(1:mxcalc,:)+timestep*( &
1032	& dq(1:mxcalc,:) &
1033	& +d_q_adv(1:mxcalc,:) &
1034	& +d_q_nudge(1:mxcalc,:) )
1035
1036	if (prt_level.ge.3) then
1037	print *, &
1038	& 'physiq-> temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1) ', &
1039	& temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1)
1040	print* ,'dv_phys=',dv_phys
1041	print* ,'d_v_age=',d_v_age
1042	print* ,'d_v_adv=',d_v_adv
1043	print* ,'d_v_nudge=',d_v_nudge
1044	print*, v
1045	print*, vg
1046	endif
1047
1048	temp(1:mxcalc)=temp(1:mxcalc)+timestep*( &
1049	& dt_phys(1:mxcalc) &
1050	& +d_t_adv(1:mxcalc) &
1051	& +d_t_nudge(1:mxcalc) &
1052	& +dt_cooling(1:mxcalc)) ! Taux de chauffage ou refroid.
1053
1054
1055	!=======================================================================
1056	!! CONSERVE EN ATTENDANT QUE LE CAS EN QUESTION FONCTIONNE EN STD !!
1057	!=======================================================================
1058
1059	teta=temp(pzero/play)*rkappa
1060
1061	!---------------------------------------------------------------------
1062	! Nudge soil temperature if requested
1063	!---------------------------------------------------------------------
1064
1065	IF (nudge_tsoil .AND. .NOT. lastcall) THEN
1066	ftsoil(1,isoil_nudge,:) = ftsoil(1,isoil_nudge,:) &
1067	& -timestep/tau_soil_nudge*(ftsoil(1,isoil_nudge,:)-Tsoil_nudge)
1068	ENDIF
1069
1070	!---------------------------------------------------------------------
1071	! Add large-scale tendencies (advection, etc) :
1072	!---------------------------------------------------------------------
1073
1074	!cc nrlmd
1075	!cc tmpvar=teta
1076	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1077	!cc
1078	!cc teta(1:mxcalc)=tmpvar(1:mxcalc)
1079	!cc tmpvar(:)=q(:,1)
1080	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1081	!cc q(1:mxcalc,1)=tmpvar(1:mxcalc)
1082	!cc tmpvar(:)=q(:,2)
1083	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1084	!cc q(1:mxcalc,2)=tmpvar(1:mxcalc)
1085
1086	END IF ! end if tendency of tendency should be added
1087
1088	!---------------------------------------------------------------------
1089	! Air temperature :
1090	!---------------------------------------------------------------------
1091	if (lastcall) then
1092	print*,'Pas de temps final ',it
1093	call ju2ymds(daytime, an, mois, jour, heure)
1094	print*,'a la date : a m j h',an, mois, jour ,heure/3600.
1095	endif
1096
1097	! incremente day time
1098	daytime = daytime+1./day_step
1099	day = int(daytime+0.1/day_step)
1100	! time = max(daytime-day,0.0)
1101	!Al1&jyg: correction de bug
1102	!cc time = real(mod(it,day_step))/day_step
1103	time = time_ini/24.+real(mod(it,day_step))/day_step
1104	it=it+1
1105
1106	enddo
1107
1108	if (ecrit_slab_oc.ne.-1) close(97)
1109
1110	!Al1 Call to 1D equivalent of dynredem (an,mois,jour,heure ?)
1111	! ---------------------------------------------------------------------------
1112	call dyn1dredem("restart1dyn.nc", &
1113	& plev,play,phi,phis,presnivs, &
1114	& u,v,temp,q,omega2)
1115
1116	CALL abort_gcm ('lmdz1d ','The End ',0)
1117
1118	END SUBROUTINE scm

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format