Context Navigation

scm.F90 @ 4629

Last change on this file since 4629 was 4593, checked in by yann meurdesoif, 15 months ago

Replace #include (c preprocessor) by INCLUDE (fortran keyword)

in phylmd (except rrtm and ecrad) filtrez, dy3dmem and dyn3dcommon

Other directories will follow
YM

File size: 40.5 KB

Rev	Line
[3541]	1	SUBROUTINE scm
	2
	3	USE ioipsl, only: ju2ymds, ymds2ju, ioconf_calendar,getin
	4	USE phys_state_var_mod, ONLY : phys_state_var_init, phys_state_var_end, &
	5	clwcon, detr_therm, &
	6	qsol, fevap, z0m, z0h, agesno, &
	7	du_gwd_rando, du_gwd_front, entr_therm, f0, fm_therm, &
	8	falb_dir, falb_dif, &
[3888]	9	ftsol, beta_aridity, pbl_tke, pctsrf, radsol, rain_fall, snow_fall, ratqs, &
[3541]	10	rnebcon, rugoro, sig1, w01, solaire_etat0, sollw, sollwdown, &
[4536]	11	solsw, solswfdiff, t_ancien, q_ancien, u_ancien, v_ancien, rneb_ancien, &
[3541]	12	wake_delta_pbl_TKE, delta_tsurf, wake_fip, wake_pe, &
	13	wake_deltaq, wake_deltat, wake_s, wake_dens, &
[3956]	14	awake_dens, cv_gen, wake_cstar, &
[3541]	15	zgam, zmax0, zmea, zpic, zsig, &
	16	zstd, zthe, zval, ale_bl, ale_bl_trig, alp_bl, ql_ancien, qs_ancien, &
[3592]	17	prlw_ancien, prsw_ancien, prw_ancien, &
	18	u10m,v10m,ale_wake,ale_bl_stat
	19
[3541]	20
	21	USE dimphy
	22	USE surface_data, only : type_ocean,ok_veget
	23	USE pbl_surface_mod, only : ftsoil, pbl_surface_init, &
	24	pbl_surface_final
	25	USE fonte_neige_mod, only : fonte_neige_init, fonte_neige_final
	26
	27	USE infotrac ! new
	28	USE control_mod
	29	USE indice_sol_mod
	30	USE phyaqua_mod
	31	! USE mod_1D_cases_read
	32	USE mod_1D_cases_read_std
	33	!USE mod_1D_amma_read
	34	USE print_control_mod, ONLY: lunout, prt_level
	35	USE iniphysiq_mod, ONLY: iniphysiq
	36	USE mod_const_mpi, ONLY: comm_lmdz
	37	USE physiq_mod, ONLY: physiq
	38	USE comvert_mod, ONLY: presnivs, ap, bp, dpres,nivsig, nivsigs, pa, &
	39	preff, aps, bps, pseudoalt, scaleheight
	40	USE temps_mod, ONLY: annee_ref, calend, day_end, day_ini, day_ref, &
	41	itau_dyn, itau_phy, start_time, year_len
	42	USE phys_cal_mod, ONLY : year_len_phys_cal_mod => year_len
	43
	44	implicit none
[4593]	45	INCLUDE "dimensions.h"
	46	INCLUDE "YOMCST.h"
	47	!! INCLUDE "control.h"
	48	INCLUDE "clesphys.h"
	49	INCLUDE "dimsoil.h"
	50	! INCLUDE "indicesol.h"
[3541]	51
[4593]	52	INCLUDE "compar1d.h"
	53	INCLUDE "flux_arp.h"
	54	INCLUDE "date_cas.h"
	55	INCLUDE "tsoilnudge.h"
	56	INCLUDE "fcg_gcssold.h"
	57	INCLUDE "compbl.h"
[3541]	58
	59	!=====================================================================
	60	! DECLARATIONS
	61	!=====================================================================
	62
[3595]	63	#undef OUTPUT_PHYS_SCM
	64
[3541]	65	!---------------------------------------------------------------------
	66	! Externals
	67	!---------------------------------------------------------------------
	68	external fq_sat
	69	real fq_sat
	70
	71	!---------------------------------------------------------------------
	72	! Arguments d' initialisations de la physique (USER DEFINE)
	73	!---------------------------------------------------------------------
	74
	75	integer, parameter :: ngrid=1
	76	real :: zcufi = 1.
	77	real :: zcvfi = 1.
	78	real :: fnday
	79	real :: day, daytime
	80	real :: day1
	81	real :: heure
	82	integer :: jour
	83	integer :: mois
	84	integer :: an
	85
	86	!---------------------------------------------------------------------
	87	! Declarations related to forcing and initial profiles
	88	!---------------------------------------------------------------------
	89
	90	integer :: kmax = llm
	91	integer llm700,nq1,nq2
	92	INTEGER, PARAMETER :: nlev_max=1000, nqmx=1000
	93	real timestep, frac
	94	real height(nlev_max),tttprof(nlev_max),qtprof(nlev_max)
	95	real uprof(nlev_max),vprof(nlev_max),e12prof(nlev_max)
	96	real ugprof(nlev_max),vgprof(nlev_max),wfls(nlev_max)
	97	real dqtdxls(nlev_max),dqtdyls(nlev_max)
	98	real dqtdtls(nlev_max),thlpcar(nlev_max)
	99	real qprof(nlev_max,nqmx)
	100
	101	! integer :: forcing_type
	102	logical :: forcing_les = .false.
	103	logical :: forcing_armcu = .false.
	104	logical :: forcing_rico = .false.
	105	logical :: forcing_radconv = .false.
	106	logical :: forcing_toga = .false.
	107	logical :: forcing_twpice = .false.
	108	logical :: forcing_amma = .false.
	109	logical :: forcing_dice = .false.
	110	logical :: forcing_gabls4 = .false.
	111
	112	logical :: forcing_GCM2SCM = .false.
	113	logical :: forcing_GCSSold = .false.
	114	logical :: forcing_sandu = .false.
	115	logical :: forcing_astex = .false.
	116	logical :: forcing_fire = .false.
	117	logical :: forcing_case = .false.
	118	logical :: forcing_case2 = .false.
	119	logical :: forcing_SCM = .false.
	120
	121	!flag forcings
	122	logical :: nudge_wind=.true.
	123	logical :: nudge_thermo=.false.
	124	logical :: cptadvw=.true.
[3780]	125
	126
[3541]	127	!=====================================================================
	128	! DECLARATIONS FOR EACH CASE
	129	!=====================================================================
	130	!
[4593]	131	INCLUDE "1D_decl_cases.h"
[3541]	132	!
	133	!---------------------------------------------------------------------
	134	! Declarations related to nudging
	135	!---------------------------------------------------------------------
	136	integer :: nudge_max
	137	parameter (nudge_max=9)
	138	integer :: inudge_RHT=1
	139	integer :: inudge_UV=2
	140	logical :: nudge(nudge_max)
	141	real :: t_targ(llm)
	142	real :: rh_targ(llm)
	143	real :: u_targ(llm)
	144	real :: v_targ(llm)
	145	!
	146	!---------------------------------------------------------------------
	147	! Declarations related to vertical discretization:
	148	!---------------------------------------------------------------------
	149	real :: pzero=1.e5
	150	real :: play (llm),zlay (llm),sig_s(llm),plev(llm+1)
	151	real :: playd(llm),zlayd(llm),ap_amma(llm+1),bp_amma(llm+1)
	152
	153	!---------------------------------------------------------------------
	154	! Declarations related to variables
	155	!---------------------------------------------------------------------
	156
	157	real :: phi(llm)
	158	real :: teta(llm),tetal(llm),temp(llm),u(llm),v(llm),w(llm)
	159	REAL rot(1, llm) ! relative vorticity, in s-1
	160	real :: rlat_rad(1),rlon_rad(1)
	161	real :: omega(llm),omega2(llm),rho(llm+1)
	162	real :: ug(llm),vg(llm),fcoriolis
	163	real :: sfdt, cfdt
	164	real :: du_phys(llm),dv_phys(llm),dt_phys(llm)
[3595]	165	real :: w_adv(llm),z_adv(llm)
	166	real :: d_t_vert_adv(llm),d_u_vert_adv(llm),d_v_vert_adv(llm)
[3541]	167	real :: dt_cooling(llm),d_t_adv(llm),d_t_nudge(llm)
	168	real :: d_u_nudge(llm),d_v_nudge(llm)
[3693]	169	! real :: d_u_adv(llm),d_v_adv(llm)
	170	real :: d_u_age(llm),d_v_age(llm)
[3541]	171	real :: alpha
	172	real :: ttt
	173
	174	REAL, ALLOCATABLE, DIMENSION(:,:):: q
	175	REAL, ALLOCATABLE, DIMENSION(:,:):: dq
[3595]	176	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_vert_adv
[3541]	177	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_adv
	178	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_nudge
	179	! REAL, ALLOCATABLE, DIMENSION(:):: d_th_adv
	180
	181	!---------------------------------------------------------------------
	182	! Initialization of surface variables
	183	!---------------------------------------------------------------------
	184	real :: run_off_lic_0(1)
	185	real :: fder(1),snsrf(1,nbsrf),qsurfsrf(1,nbsrf)
	186	real :: tsoil(1,nsoilmx,nbsrf)
	187	! real :: agesno(1,nbsrf)
	188
	189	!---------------------------------------------------------------------
	190	! Call to phyredem
	191	!---------------------------------------------------------------------
	192	logical :: ok_writedem =.true.
	193	real :: sollw_in = 0.
	194	real :: solsw_in = 0.
	195
	196	!---------------------------------------------------------------------
	197	! Call to physiq
	198	!---------------------------------------------------------------------
	199	logical :: firstcall=.true.
	200	logical :: lastcall=.false.
	201	real :: phis(1) = 0.0
	202	real :: dpsrf(1)
	203
	204	!---------------------------------------------------------------------
	205	! Initializations of boundary conditions
	206	!---------------------------------------------------------------------
	207	real, allocatable :: phy_nat (:) ! 0=ocean libre,1=land,2=glacier,3=banquise
	208	real, allocatable :: phy_alb (:) ! Albedo land only (old value condsurf_jyg=0.3)
	209	real, allocatable :: phy_sst (:) ! SST (will not be used; cf read_tsurf1d.F)
	210	real, allocatable :: phy_bil (:) ! Ne sert que pour les slab_ocean
	211	real, allocatable :: phy_rug (:) ! Longueur rugosite utilisee sur land only
	212	real, allocatable :: phy_ice (:) ! Fraction de glace
	213	real, allocatable :: phy_fter(:) ! Fraction de terre
	214	real, allocatable :: phy_foce(:) ! Fraction de ocean
	215	real, allocatable :: phy_fsic(:) ! Fraction de glace
	216	real, allocatable :: phy_flic(:) ! Fraction de glace
	217
	218	!---------------------------------------------------------------------
	219	! Fichiers et d'autres variables
	220	!---------------------------------------------------------------------
	221	integer :: k,l,i,it=1,mxcalc
	222	integer :: nsrf
	223	integer jcode
	224	INTEGER read_climoz
	225	!
	226	integer :: it_end ! iteration number of the last call
[3780]	227	!Al1,plev,play,phi,phis,presnivs,
[3541]	228	integer ecrit_slab_oc !1=ecrit,-1=lit,0=no file
	229	data ecrit_slab_oc/-1/
	230	!
	231	! if flag_inhib_forcing = 0, tendencies of forcing are added
	232	! <> 0, tendencies of forcing are not added
	233	INTEGER :: flag_inhib_forcing = 0
	234
	235
	236	print*,'VOUS ENTREZ DANS LE 1D FORMAT STANDARD'
	237
	238	!=====================================================================
	239	! INITIALIZATIONS
	240	!=====================================================================
	241	du_phys(:)=0.
	242	dv_phys(:)=0.
	243	dt_phys(:)=0.
[3595]	244	d_t_vert_adv(:)=0.
	245	d_u_vert_adv(:)=0.
	246	d_v_vert_adv(:)=0.
[3541]	247	dt_cooling(:)=0.
	248	d_t_adv(:)=0.
	249	d_t_nudge(:)=0.
	250	d_u_nudge(:)=0.
	251	d_v_nudge(:)=0.
[3693]	252	d_u_adv(:)=0.
	253	d_v_adv(:)=0.
	254	d_u_age(:)=0.
	255	d_v_age(:)=0.
[3541]	256
[3780]	257
[3541]	258	! Initialization of Common turb_forcing
	259	dtime_frcg = 0.
	260	Turb_fcg_gcssold=.false.
	261	hthturb_gcssold = 0.
	262	hqturb_gcssold = 0.
	263
	264
	265
	266
	267	!---------------------------------------------------------------------
	268	! OPTIONS OF THE 1D SIMULATION (lmdz1d.def => unicol.def)
	269	!---------------------------------------------------------------------
[3686]	270	call conf_unicol
[3541]	271	!Al1 moves this gcssold var from common fcg_gcssold to
	272	Turb_fcg_gcssold = xTurb_fcg_gcssold
	273	! --------------------------------------------------------------------
	274	close(1)
	275	write(,) 'lmdz1d.def lu => unicol.def'
	276
	277	forcing_SCM = .true.
	278	year_ini_cas=1997
	279	! It is possible that those parameters are run twice.
[3780]	280	! A REVOIR : LIRE PEUT ETRE AN MOIS JOUR DIRECETEMENT
[3541]	281
[3780]	282
[3541]	283	call getin('anneeref',year_ini_cas)
	284	call getin('dayref',day_deb)
	285	mth_ini_cas=1 ! pour le moment on compte depuis le debut de l'annee
	286	call getin('time_ini',heure_ini_cas)
	287
[3780]	288	print*,'NATURE DE LA SURFACE ',nat_surf
[3541]	289	!
	290	! Initialization of the logical switch for nudging
[3780]	291
[3541]	292	jcode = iflag_nudge
	293	do i = 1,nudge_max
	294	nudge(i) = mod(jcode,10) .ge. 1
	295	jcode = jcode/10
	296	enddo
[3780]	297	!-----------------------------------------------------------------------
[3541]	298	! Definition of the run
[3780]	299	!-----------------------------------------------------------------------
[3541]	300
	301	call conf_gcm( 99, .TRUE. )
	302
	303	!-----------------------------------------------------------------------
	304	allocate( phy_nat (year_len)) ! 0=ocean libre,1=land,2=glacier,3=banquise
	305	phy_nat(:)=0.0
	306	allocate( phy_alb (year_len)) ! Albedo land only (old value condsurf_jyg=0.3)
	307	allocate( phy_sst (year_len)) ! SST (will not be used; cf read_tsurf1d.F)
	308	allocate( phy_bil (year_len)) ! Ne sert que pour les slab_ocean
	309	phy_bil(:)=1.0
	310	allocate( phy_rug (year_len)) ! Longueur rugosite utilisee sur land only
	311	allocate( phy_ice (year_len)) ! Fraction de glace
	312	phy_ice(:)=0.0
	313	allocate( phy_fter(year_len)) ! Fraction de terre
	314	phy_fter(:)=0.0
	315	allocate( phy_foce(year_len)) ! Fraction de ocean
	316	phy_foce(:)=0.0
	317	allocate( phy_fsic(year_len)) ! Fraction de glace
	318	phy_fsic(:)=0.0
	319	allocate( phy_flic(year_len)) ! Fraction de glace
	320	phy_flic(:)=0.0
[3780]	321
	322
[3541]	323	!-----------------------------------------------------------------------
	324	! Choix du calendrier
	325	! -------------------
	326
	327	! calend = 'earth_365d'
	328	if (calend == 'earth_360d') then
[4361]	329	call ioconf_calendar('360_day')
[3541]	330	write(,)'CALENDRIER CHOISI: Terrestre a 360 jours/an'
	331	else if (calend == 'earth_365d') then
	332	call ioconf_calendar('noleap')
	333	write(,)'CALENDRIER CHOISI: Terrestre a 365 jours/an'
	334	else if (calend == 'earth_366d') then
	335	call ioconf_calendar('all_leap')
	336	write(,)'CALENDRIER CHOISI: Terrestre bissextile'
	337	else if (calend == 'gregorian') then
	338	stop 'gregorian calend should not be used by normal user'
	339	call ioconf_calendar('gregorian') ! not to be used by normal users
	340	write(,)'CALENDRIER CHOISI: Gregorien'
	341	else
	342	write (,) 'ERROR : unknown calendar ', calend
	343	stop 'calend should be 360d,earth_365d,earth_366d,gregorian'
	344	endif
	345	!-----------------------------------------------------------------------
	346	!
	347	!c Date :
	348	! La date est supposee donnee sous la forme [annee, numero du jour dans
	349	! l annee] ; l heure est donnee dans time_ini, lu dans lmdz1d.def.
	350	! On appelle ymds2ju pour convertir [annee, jour] en [jour Julien].
	351	! Le numero du jour est dans "day". L heure est traitee separement.
	352	! La date complete est dans "daytime" (l'unite est le jour).
[3780]	353
	354
[3541]	355	if (nday>0) then
	356	fnday=nday
	357	else
	358	fnday=-nday/float(day_step)
	359	endif
	360	print *,'fnday=',fnday
	361	! start_time doit etre en FRACTION DE JOUR
	362	start_time=time_ini/24.
	363
	364	annee_ref = anneeref
	365	mois = 1
	366	day_ref = dayref
	367	heure = 0.
	368	itau_dyn = 0
	369	itau_phy = 0
	370	call ymds2ju(annee_ref,mois,day_ref,heure,day)
	371	day_ini = int(day)
	372	day_end = day_ini + int(fnday)
	373
	374	! Convert the initial date to Julian day
	375	day_ini_cas=day_deb
	376	print*,'time case',year_ini_cas,mth_ini_cas,day_ini_cas
	377	call ymds2ju &
	378	& (year_ini_cas,mth_ini_cas,day_ini_cas,heure_ini_cas*3600 &
	379	& ,day_ju_ini_cas)
	380	print*,'time case 2',day_ini_cas,day_ju_ini_cas
	381	daytime = day + heure_ini_cas/24. ! 1st day and initial time of the simulation
	382
	383	! Print out the actual date of the beginning of the simulation :
	384	call ju2ymds(daytime,year_print, month_print,day_print,sec_print)
	385	print *,' Time of beginning : ', &
	386	& year_print, month_print, day_print, sec_print
	387
	388	!---------------------------------------------------------------------
	389	! Initialization of dimensions, geometry and initial state
	390	!---------------------------------------------------------------------
[3780]	391	! call init_phys_lmdz(1,1,llm,1,(/1/)) ! job now done via iniphysiq
[3541]	392	! but we still need to initialize dimphy module (klon,klev,etc.) here.
	393	call init_dimphy1D(1,llm)
	394	call suphel
[4325]	395	call init_infotrac
[3541]	396
	397	if (nqtot>nqmx) STOP 'Augmenter nqmx dans lmdz1d.F'
	398	allocate(q(llm,nqtot)) ; q(:,:)=0.
	399	allocate(dq(llm,nqtot))
[3595]	400	allocate(d_q_vert_adv(llm,nqtot))
[3541]	401	allocate(d_q_adv(llm,nqtot))
	402	allocate(d_q_nudge(llm,nqtot))
	403	! allocate(d_th_adv(llm))
	404
	405	q(:,:) = 0.
	406	dq(:,:) = 0.
[3595]	407	d_q_vert_adv(:,:) = 0.
[3541]	408	d_q_adv(:,:) = 0.
	409	d_q_nudge(:,:) = 0.
	410
	411	!
	412	! No ozone climatology need be read in this pre-initialization
	413	! (phys_state_var_init is called again in physiq)
	414	read_climoz = 0
[3781]	415	nsw=6
	416
[3541]	417	call phys_state_var_init(read_climoz)
	418
	419	if (ngrid.ne.klon) then
	420	print*,'stop in inifis'
	421	print*,'Probleme de dimensions :'
	422	print*,'ngrid = ',ngrid
	423	print*,'klon = ',klon
	424	stop
	425	endif
	426	!!!=====================================================================
	427	!!! Feedback forcing values for Gateaux differentiation (al1)
	428	!!!=====================================================================
	429	!!
	430	qsol = qsolinp
	431	qsurf = fq_sat(tsurf,psurf/100.)
[3888]	432	beta_aridity(:,:) = beta_surf
[3541]	433	day1= day_ini
	434	time=daytime-day
	435	ts_toga(1)=tsurf ! needed by read_tsurf1d.F
	436	rho(1)=psurf/(rdtsurf(1.+(rv/rd-1.)*qsurf))
	437
	438	!
	439	!! mpl et jyg le 22/08/2012 :
	440	!! pour que les cas a flux de surface imposes marchent
	441	IF(.NOT.ok_flux_surf.or.max(abs(wtsurf),abs(wqsurf))>0.) THEN
	442	fsens=-wtsurfrcpdrho(1)
	443	flat=-wqsurfrlvttrho(1)
	444	print *,'Flux: ok_flux wtsurf wqsurf',ok_flux_surf,wtsurf,wqsurf
	445	ENDIF
	446	print*,'Flux sol ',fsens,flat
	447
	448	! Vertical discretization and pressure levels at half and mid levels:
	449
	450	pa = 5e4
	451	!! preff= 1.01325e5
	452	preff = psurf
	453	IF (ok_old_disvert) THEN
	454	call disvert0(pa,preff,ap,bp,dpres,presnivs,nivsigs,nivsig)
	455	print *,'On utilise disvert0'
	456	aps(1:llm)=0.5*(ap(1:llm)+ap(2:llm+1))
	457	bps(1:llm)=0.5*(bp(1:llm)+bp(2:llm+1))
	458	scaleheight=8.
	459	pseudoalt(1:llm)=-scaleheight*log(presnivs(1:llm)/preff)
	460	ELSE
	461	call disvert()
	462	print *,'On utilise disvert'
	463	! Nouvelle version disvert permettant d imposer ap,bp (modif L.Guez) MPL 18092012
	464	! Dans ce cas, on lit ap,bp dans le fichier hybrid.txt
	465	ENDIF
	466
	467	sig_s=presnivs/preff
	468	plev =ap+bp*psurf
	469	play = 0.5*(plev(1:llm)+plev(2:llm+1))
[3780]	470	zlay=-rd300.log(play/psurf)/rg ! moved after reading profiles.
[3541]	471
	472	IF (forcing_type .eq. 59) THEN
	473	! pour forcing_sandu, on cherche l'indice le plus proche de 700hpa#3000m
	474	write(,) '***********************'
	475	do l = 1, llm
	476	write(,) 'l,play(l),presnivs(l): ',l,play(l),presnivs(l)
	477	if (trouve_700 .and. play(l).le.70000) then
	478	llm700=l
	479	print *,'llm700,play=',llm700,play(l)/100.
	480	trouve_700= .false.
	481	endif
	482	enddo
	483	write(,) '***********************'
	484	ENDIF
	485
	486	!
	487	!=====================================================================
	488	! EVENTUALLY, READ FORCING DATA :
	489	!=====================================================================
	490
[4593]	491	INCLUDE "1D_read_forc_cases.h"
[3592]	492	print,'A d_t_adv ',d_t_adv(1:20)86400
[3541]	493
	494	if (forcing_GCM2SCM) then
	495	write (,) 'forcing_GCM2SCM not yet implemented'
	496	stop 'in initialization'
	497	endif ! forcing_GCM2SCM
	498
	499
	500	!=====================================================================
	501	! Initialisation de la physique :
	502	!=====================================================================
	503
	504	! Rq: conf_phys.F90 lit tous les flags de physiq.def; conf_phys appele depuis physiq.F
	505	!
	506	! day_step, iphysiq lus dans gcm.def ci-dessus
	507	! timestep: calcule ci-dessous from rday et day_step
	508	! ngrid=1
	509	! llm: defini dans .../modipsl/modeles/LMDZ4/libf/grid/dimension
	510	! rday: defini dans suphel.F (86400.)
	511	! day_ini: lu dans run.def (dayref)
	512	! rlat_rad,rlon-rad: transformes en radian de rlat,rlon lus dans lmdz1d.def (en degres)
	513	! airefi,zcufi,zcvfi initialises au debut de ce programme
	514	! rday,ra,rg,rd,rcpd declares dans YOMCST.h et calcules dans suphel.F
[3780]	515
	516
[3541]	517	day_step = float(nsplit_phys)*day_step/float(iphysiq)
	518	write (,) 'Time step divided by nsplit_phys (=',nsplit_phys,')'
	519	timestep =rday/day_step
	520	dtime_frcg = timestep
	521	!
	522	zcufi=airefi
	523	zcvfi=airefi
	524	!
	525	rlat_rad(1)=xlat*rpi/180.
	526	rlon_rad(1)=xlon*rpi/180.
	527
	528	! iniphysiq will call iniaqua who needs year_len from phys_cal_mod
	529	year_len_phys_cal_mod=year_len
	530
	531	! Ehouarn: iniphysiq requires arrays related to (3D) dynamics grid,
	532	! e.g. for cell boundaries, which are meaningless in 1D; so pad these
	533	! with '0.' when necessary
[3780]	534
[3541]	535	call iniphysiq(iim,jjm,llm, &
	536	1,comm_lmdz, &
	537	rday,day_ini,timestep, &
	538	(/rlat_rad(1),0./),(/0./), &
	539	(/0.,0./),(/rlon_rad(1),0./), &
	540	(/ (/airefi,0./),(/0.,0./) /), &
	541	(/zcufi,0.,0.,0./), &
	542	(/zcvfi,0./), &
	543	ra,rg,rd,rcpd,1)
	544	print*,'apres iniphysiq'
	545
	546	! 2 PARAMETRES QUI DEVRAIENT ETRE LUS DANS run.def MAIS NE LE SONT PAS ICI:
	547	co2_ppm= 330.0
	548	solaire=1370.0
	549
	550	! Ecriture du startphy avant le premier appel a la physique.
	551	! On le met juste avant pour avoir acces a tous les champs
	552
	553	if (ok_writedem) then
	554
	555	!--------------------------------------------------------------------------
	556	! pbl_surface_init (called here) and pbl_surface_final (called by phyredem)
	557	! need : qsol fder snow qsurf evap rugos agesno ftsoil
	558	!--------------------------------------------------------------------------
	559
	560	type_ocean = "force"
	561	run_off_lic_0(1) = restart_runoff
	562	call fonte_neige_init(run_off_lic_0)
	563
	564	fder=0.
	565	snsrf(1,:)=snowmass ! masse de neige des sous surface
	566	qsurfsrf(1,:)=qsurf ! humidite de l'air des sous surface
	567	fevap=0.
	568	z0m(1,:)=rugos ! couverture de neige des sous surface
	569	z0h(1,:)=rugosh ! couverture de neige des sous surface
	570	agesno = xagesno
	571	tsoil(:,:,:)=tsurf
	572	!------ AMMA 2e run avec modele sol et rayonnement actif (MPL 23052012)
	573	! tsoil(1,1,1)=299.18
	574	! tsoil(1,2,1)=300.08
	575	! tsoil(1,3,1)=301.88
	576	! tsoil(1,4,1)=305.48
	577	! tsoil(1,5,1)=308.00
	578	! tsoil(1,6,1)=308.00
	579	! tsoil(1,7,1)=308.00
	580	! tsoil(1,8,1)=308.00
	581	! tsoil(1,9,1)=308.00
	582	! tsoil(1,10,1)=308.00
	583	! tsoil(1,11,1)=308.00
	584	!-----------------------------------------------------------------------
	585	call pbl_surface_init(fder, snsrf, qsurfsrf, tsoil)
	586
	587	!------------------ prepare limit conditions for limit.nc -----------------
	588	!-- Ocean force
	589
	590	print*,'avant phyredem'
	591	pctsrf(1,:)=0.
	592	if (nat_surf.eq.0.) then
	593	pctsrf(1,is_oce)=1.
	594	pctsrf(1,is_ter)=0.
	595	pctsrf(1,is_lic)=0.
	596	pctsrf(1,is_sic)=0.
	597	else if (nat_surf .eq. 1) then
	598	pctsrf(1,is_oce)=0.
	599	pctsrf(1,is_ter)=1.
	600	pctsrf(1,is_lic)=0.
	601	pctsrf(1,is_sic)=0.
	602	else if (nat_surf .eq. 2) then
	603	pctsrf(1,is_oce)=0.
	604	pctsrf(1,is_ter)=0.
	605	pctsrf(1,is_lic)=1.
	606	pctsrf(1,is_sic)=0.
	607	else if (nat_surf .eq. 3) then
	608	pctsrf(1,is_oce)=0.
	609	pctsrf(1,is_ter)=0.
	610	pctsrf(1,is_lic)=0.
	611	pctsrf(1,is_sic)=1.
	612
	613	end if
	614
	615
	616	print*,'nat_surf,pctsrf(1,is_oce),pctsrf(1,is_ter)',nat_surf &
	617	& ,pctsrf(1,is_oce),pctsrf(1,is_ter)
	618
	619	zmasq=pctsrf(1,is_ter)+pctsrf(1,is_lic)
	620	zpic = zpicinp
	621	ftsol=tsurf
	622	falb_dir=albedo
	623	falb_dif=albedo
	624	rugoro=rugos
	625	t_ancien(1,:)=temp(:)
	626	q_ancien(1,:)=q(:,1)
	627	ql_ancien = 0.
	628	qs_ancien = 0.
	629	prlw_ancien = 0.
	630	prsw_ancien = 0.
	631	prw_ancien = 0.
	632	!jyg<
[3781]	633	! Etienne: comment those lines since now the TKE is inialized in 1D_read_forc_cases
[3780]	634	!! pbl_tke(:,:,:)=1.e-8
[3781]	635	! pbl_tke(:,:,:)=0.
[3780]	636	! pbl_tke(:,2,:)=1.e-2
[3541]	637	!>jyg
	638	rain_fall=0.
	639	snow_fall=0.
	640	solsw=0.
[3956]	641	solswfdiff=0.
[3541]	642	sollw=0.
	643	sollwdown=rsigmatsurf*4
	644	radsol=0.
	645	rnebcon=0.
	646	ratqs=0.
	647	clwcon=0.
	648	zmax0 = 0.
[4104]	649	zmea=zsurf
[3541]	650	zstd=0.
	651	zsig=0.
	652	zgam=0.
	653	zval=0.
	654	zthe=0.
	655	sig1=0.
	656	w01=0.
[3956]	657	!
[3541]	658	wake_deltaq = 0.
	659	wake_deltat = 0.
	660	wake_delta_pbl_TKE(:,:,:) = 0.
	661	delta_tsurf = 0.
	662	wake_fip = 0.
	663	wake_pe = 0.
	664	wake_s = 0.
	665	wake_dens = 0.
[3956]	666	awake_dens = 0.
	667	cv_gen = 0.
	668	wake_cstar = 0.
[3541]	669	ale_bl = 0.
	670	ale_bl_trig = 0.
	671	alp_bl = 0.
	672	IF (ALLOCATED(du_gwd_rando)) du_gwd_rando = 0.
	673	IF (ALLOCATED(du_gwd_front)) du_gwd_front = 0.
	674	entr_therm = 0.
	675	detr_therm = 0.
	676	f0 = 0.
	677	fm_therm = 0.
	678	u_ancien(1,:)=u(:)
	679	v_ancien(1,:)=v(:)
[4536]	680	rneb_ancien(1,:)=0.
[3541]	681
[3780]	682	u10m=0.
	683	v10m=0.
	684	ale_wake=0.
	685	ale_bl_stat=0.
[3592]	686
[3541]	687	!------------------------------------------------------------------------
	688	! Make file containing restart for the physics (startphy.nc)
	689	!
	690	! NB: List of the variables to be written by phyredem (via put_field):
	691	! rlon,rlat,zmasq,pctsrf(:,is_ter),pctsrf(:,is_lic),pctsrf(:,is_oce)
	692	! pctsrf(:,is_sic),ftsol(:,nsrf),tsoil(:,isoil,nsrf),qsurf(:,nsrf)
	693	! qsol,falb_dir(:,nsrf),falb_dif(:,nsrf),evap(:,nsrf),snow(:,nsrf)
[3956]	694	! radsol,solsw,solswfdiff,sollw, sollwdown,fder,rain_fall,snow_fall,frugs(:,nsrf)
[3541]	695	! agesno(:,nsrf),zmea,zstd,zsig,zgam,zthe,zpic,zval,rugoro
	696	! t_ancien,q_ancien,,frugs(:,is_oce),clwcon(:,1),rnebcon(:,1),ratqs(:,1)
	697	! run_off_lic_0,pbl_tke(:,1:klev,nsrf), zmax0,f0,sig1,w01
[3956]	698	! wake_deltat,wake_deltaq,wake_s,wake_dens,awake_dens,cv_gen,wake_cstar,
[3541]	699	! wake_fip,wake_delta_pbl_tke(:,1:klev,nsrf)
	700	!
	701	! NB2: The content of the startphy.nc file depends on some flags defined in
	702	! the ".def" files. However, since conf_phys is not called in lmdz1d.F90, these flags have
	703	! to be set at some arbitratry convenient values.
	704	!------------------------------------------------------------------------
[3780]	705	!Al1 =============== restart option ======================================
[4553]	706	iflag_physiq=0
[4537]	707	call getin('iflag_physiq',iflag_physiq)
	708
[3541]	709	if (.not.restart) then
	710	iflag_pbl = 5
	711	call phyredem ("startphy.nc")
	712	else
	713	! (desallocations)
	714	print*,'callin surf final'
	715	call pbl_surface_final( fder, snsrf, qsurfsrf, tsoil)
	716	print*,'after surf final'
	717	CALL fonte_neige_final(run_off_lic_0)
	718	endif
	719
	720	ok_writedem=.false.
	721	print*,'apres phyredem'
	722
	723	endif ! ok_writedem
	724
	725	!------------------------------------------------------------------------
	726	! Make file containing boundary conditions (limit.nc) Al1->restartdyn*
	727	! --------------------------------------------------
	728	! NB: List of the variables to be written in limit.nc
	729	! (by writelim.F, subroutine of 1DUTILS.h):
	730	! phy_nat,phy_alb,phy_sst,phy_bil,phy_rug,phy_ice,
	731	! phy_fter,phy_foce,phy_flic,phy_fsic)
	732	!------------------------------------------------------------------------
	733	do i=1,year_len
	734	phy_nat(i) = nat_surf
	735	phy_alb(i) = albedo
	736	phy_sst(i) = tsurf ! read_tsurf1d will be used instead
	737	phy_rug(i) = rugos
	738	phy_fter(i) = pctsrf(1,is_ter)
	739	phy_foce(i) = pctsrf(1,is_oce)
	740	phy_fsic(i) = pctsrf(1,is_sic)
	741	phy_flic(i) = pctsrf(1,is_lic)
	742	enddo
	743
	744	! fabrication de limit.nc
	745	call writelim (1,phy_nat,phy_alb,phy_sst,phy_bil,phy_rug, &
	746	& phy_ice,phy_fter,phy_foce,phy_flic,phy_fsic)
	747
	748
	749	call phys_state_var_end
	750	!Al1
	751	if (restart) then
	752	print*,'call to restart dyn 1d'
	753	Call dyn1deta0("start1dyn.nc",plev,play,phi,phis,presnivs, &
	754	& u,v,temp,q,omega2)
	755
	756	print*,'fnday,annee_ref,day_ref,day_ini', &
	757	& fnday,annee_ref,day_ref,day_ini
	758	!** call ymds2ju(annee_ref,mois,day_ini,heure,day)
	759	day = day_ini
	760	day_end = day_ini + nday
	761	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
	762
	763	! Print out the actual date of the beginning of the simulation :
	764	call ju2ymds(daytime, an, mois, jour, heure)
	765	print *,' Time of beginning : y m d h',an, mois,jour,heure/3600.
	766
	767	day = int(daytime)
	768	time=daytime-day
	769
	770	print,'*** intialised fields from restart1dyn *****'
	771	print*,'plev,play,phi,phis,presnivs,u,v,temp,q,omega2'
	772	print*,'temp(1),q(1,1),u(1),v(1),plev(1),phis :'
[3780]	773	print*,temp(1),q(1,1),u(1),v(1),plev(1),phis(1)
[3541]	774	! raz for safety
	775	do l=1,llm
[3595]	776	d_q_vert_adv(l,1) = 0.
[3541]	777	enddo
	778	endif
[3780]	779	!====================== end restart =================================
[3541]	780	IF (ecrit_slab_oc.eq.1) then
	781	open(97,file='div_slab.dat',STATUS='UNKNOWN')
	782	elseif (ecrit_slab_oc.eq.0) then
	783	open(97,file='div_slab.dat',STATUS='OLD')
	784	endif
	785	!
	786	!=====================================================================
[3595]	787	#ifdef OUTPUT_PHYS_SCM
[3977]	788	CALL iophys_ini(timestep)
[3595]	789	#endif
[3780]	790
	791	!=====================================================================
[3541]	792	! START OF THE TEMPORAL LOOP :
	793	!=====================================================================
	794
	795	it_end = nint(fnday*day_step)
	796	do while(it.le.it_end)
	797
	798	if (prt_level.ge.1) then
	799	print*,'XXXXXXXXXXXXXXXXXXX ITAP,day,time=', &
	800	& it,day,time,it_end,day_step
	801	print*,'PAS DE TEMPS ',timestep
	802	endif
	803	if (it.eq.it_end) lastcall=.True.
	804
	805	!---------------------------------------------------------------------
	806	! Interpolation of forcings in time and onto model levels
	807	!---------------------------------------------------------------------
	808
[4593]	809	INCLUDE "1D_interp_cases.h"
[3541]	810
	811	!---------------------------------------------------------------------
	812	! Geopotential :
	813	!---------------------------------------------------------------------
[4104]	814	phis(1)=zsurf*RG
[3780]	815	! phi(1)=phis(1)+RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
[4104]	816
	817	! Calculate geopotential from the ground surface since phi and phis are added in physiq_mod
[3780]	818	phi(1)=RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
[3541]	819
	820	do l = 1, llm-1
	821	phi(l+1)=phi(l)+RD(temp(l)+temp(l+1)) &
	822	& (play(l)-play(l+1))/(play(l)+play(l+1))
	823	enddo
	824
	825	!---------------------------------------------------------------------
[3595]	826	! Vertical advection
	827	!---------------------------------------------------------------------
	828
	829	IF ( forc_w+forc_omega > 0 ) THEN
	830
	831	IF ( forc_w == 1 ) THEN
	832	w_adv=w_mod_cas
	833	z_adv=phi/RG
	834	ELSE
	835	w_adv=omega
	836	z_adv=play
	837	ENDIF
	838
	839	teta=temp(pzero/play)*rkappa
	840	do l=2,llm-1
[3693]	841	! vertical tendencies computed as d X / d t = -W d X / d z
[3595]	842	d_u_vert_adv(l)=-w_adv(l)*(u(l+1)-u(l-1))/(z_adv(l+1)-z_adv(l-1))
	843	d_v_vert_adv(l)=-w_adv(l)*(v(l+1)-v(l-1))/(z_adv(l+1)-z_adv(l-1))
[3693]	844	! d theta / dt = -W d theta / d z, transformed into d temp / d t dividing by (pzero/play(l))**rkappa
	845	d_t_vert_adv(l)=-w_adv(l)(teta(l+1)-teta(l-1))/(z_adv(l+1)-z_adv(l-1)) / (pzero/play(l))*rkappa
[3595]	846	d_q_vert_adv(l,1)=-w_adv(l)*(q(l+1,1)-q(l-1,1))/(z_adv(l+1)-z_adv(l-1))
	847	enddo
[3693]	848	d_u_adv(:)=d_u_adv(:)+d_u_vert_adv(:)
	849	d_v_adv(:)=d_v_adv(:)+d_v_vert_adv(:)
[3595]	850	d_t_adv(:)=d_t_adv(:)+d_t_vert_adv(:)
	851	d_q_adv(:,1)=d_q_adv(:,1)+d_q_vert_adv(:,1)
[4104]	852
[3595]	853	ENDIF
	854
	855	!---------------------------------------------------------------------
[3541]	856	! Listing output for debug prt_level>=1
	857	!---------------------------------------------------------------------
	858	if (prt_level>=1) then
	859	print *,' avant physiq : -------- day time ',day,time
	860	write(,) 'firstcall,lastcall,phis', &
	861	& firstcall,lastcall,phis
	862	end if
	863	if (prt_level>=5) then
	864	write(*,'(a10,2a4,4a13)') 'BEFOR1 IT=','it','l', &
	865	& 'presniv','plev','play','phi'
	866	write(*,'(a10,2i4,4f13.2)') ('BEFOR1 IT= ',it,l, &
	867	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
	868	write(*,'(a11,2a4,a11,6a8)') 'BEFOR2','it','l', &
	869	& 'presniv','u','v','temp','q1','q2','omega2'
	870	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('BEFOR2 IT= ',it,l, &
	871	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
	872	endif
	873
	874	!---------------------------------------------------------------------
	875	! Call physiq :
	876	!---------------------------------------------------------------------
	877	call physiq(ngrid,llm, &
	878	firstcall,lastcall,timestep, &
	879	plev,play,phi,phis,presnivs, &
	880	u,v, rot, temp,q,omega2, &
	881	du_phys,dv_phys,dt_phys,dq,dpsrf)
	882	firstcall=.false.
	883
	884	!---------------------------------------------------------------------
	885	! Listing output for debug
	886	!---------------------------------------------------------------------
	887	if (prt_level>=5) then
	888	write(*,'(a11,2a4,4a13)') 'AFTER1 IT=','it','l', &
	889	& 'presniv','plev','play','phi'
	890	write(*,'(a11,2i4,4f13.2)') ('AFTER1 it= ',it,l, &
	891	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
	892	write(*,'(a11,2a4,a11,6a8)') 'AFTER2','it','l', &
	893	& 'presniv','u','v','temp','q1','q2','omega2'
	894	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('AFTER2 it= ',it,l, &
	895	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
	896	write(*,'(a11,2a4,a11,5a8)') 'AFTER3','it','l', &
	897	& 'presniv','du_phys','dv_phys','dt_phys','dq1','dq2'
	898	write(*,'(a11,2i4,f11.2,5f8.2)') ('AFTER3 it= ',it,l, &
	899	& presnivs(l),86400du_phys(l),86400dv_phys(l), &
	900	& 86400dt_phys(l),86400dq(l,1),dq(l,2),l=1,llm)
	901	write(,) 'dpsrf',dpsrf
	902	endif
	903	!---------------------------------------------------------------------
	904	! Add physical tendencies :
	905	!---------------------------------------------------------------------
	906
	907	fcoriolis=2.sin(rpixlat/180.)*romega
	908
	909	IF (prt_level >= 5) print*, 'fcoriolis, xlat,mxcalc ', &
	910	fcoriolis, xlat,mxcalc
	911
[3693]	912	!---------------------------------------------------------------------
	913	! Geostrophic forcing
	914	!---------------------------------------------------------------------
[3541]	915
[3693]	916	IF ( forc_geo == 0 ) THEN
	917	d_u_age(1:mxcalc)=0.
	918	d_v_age(1:mxcalc)=0.
	919	ELSE
[3541]	920	sfdt = sin(0.5fcoriolistimestep)
	921	cfdt = cos(0.5fcoriolistimestep)
[3780]	922
[3693]	923	d_u_age(1:mxcalc)= -2.sfdt/timestep &
[3541]	924	& (sfdt*(u(1:mxcalc)-ug(1:mxcalc)) - &
	925	& cfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
	926	!! : fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
	927	!
[3693]	928	d_v_age(1:mxcalc)= -2.sfdt/timestep &
[3541]	929	& (cfdt*(u(1:mxcalc)-ug(1:mxcalc)) + &
	930	& sfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
	931	!! : -fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
[3693]	932	ENDIF
[3541]	933	!
[3693]	934	!---------------------------------------------------------------------
[3541]	935	! Nudging
[4104]	936	! EV: rewrite the section to account for a time- and height-varying
	937	! nudging
[3693]	938	!---------------------------------------------------------------------
[3541]	939	d_t_nudge(:) = 0.
	940	d_u_nudge(:) = 0.
	941	d_v_nudge(:) = 0.
[3593]	942	d_q_nudge(:,:) = 0.
[4104]	943
[3594]	944	DO l=1,llm
[4104]	945
	946	IF (nudging_u .LT. 0) THEN
	947
	948	d_u_nudge(l)=(u_nudg_mod_cas(l)-u(l))*invtau_u_nudg_mod_cas(l)
	949
	950	ELSE
	951
	952	IF ( play(l) < p_nudging_u .AND. nint(nudging_u) /= 0 ) &
[3594]	953	& d_u_nudge(l)=(u_nudg_mod_cas(l)-u(l))/nudging_u
[4104]	954
	955	ENDIF
	956
	957
	958	IF (nudging_v .LT. 0) THEN
	959
	960	d_v_nudge(l)=(v_nudg_mod_cas(l)-v(l))*invtau_v_nudg_mod_cas(l)
	961
	962	ELSE
	963
	964
	965	IF ( play(l) < p_nudging_v .AND. nint(nudging_v) /= 0 ) &
[3594]	966	& d_v_nudge(l)=(v_nudg_mod_cas(l)-v(l))/nudging_v
[4104]	967
	968	ENDIF
	969
	970
	971	IF (nudging_t .LT. 0) THEN
	972
	973	d_t_nudge(l)=(temp_nudg_mod_cas(l)-temp(l))*invtau_temp_nudg_mod_cas(l)
	974
	975	ELSE
	976
	977
	978	IF ( play(l) < p_nudging_t .AND. nint(nudging_t) /= 0 ) &
[3686]	979	& d_t_nudge(l)=(temp_nudg_mod_cas(l)-temp(l))/nudging_t
[4104]	980
	981	ENDIF
	982
	983
	984	IF (nudging_qv .LT. 0) THEN
	985
	986	d_q_nudge(l,1)=(qv_nudg_mod_cas(l)-q(l,1))*invtau_qv_nudg_mod_cas(l)
	987
	988	ELSE
	989
	990	IF ( play(l) < p_nudging_qv .AND. nint(nudging_qv) /= 0 ) &
[3594]	991	& d_q_nudge(l,1)=(qv_nudg_mod_cas(l)-q(l,1))/nudging_qv
[4104]	992
	993	ENDIF
	994
[3594]	995	ENDDO
[3595]	996
[3693]	997	!---------------------------------------------------------------------
	998	! Optional outputs
	999	!---------------------------------------------------------------------
[4104]	1000
[3595]	1001	#ifdef OUTPUT_PHYS_SCM
	1002	CALL iophys_ecrit('w_adv',klev,'w_adv','K/day',w_adv)
	1003	CALL iophys_ecrit('z_adv',klev,'z_adv','K/day',z_adv)
	1004	CALL iophys_ecrit('dtadv',klev,'dtadv','K/day',86400*d_t_adv)
	1005	CALL iophys_ecrit('dtdyn',klev,'dtdyn','K/day',86400*d_t_vert_adv)
[3594]	1006	CALL iophys_ecrit('qv',klev,'qv','g/kg',1000*q(:,1))
	1007	CALL iophys_ecrit('qvnud',klev,'qvnud','g/kg',1000*u_nudg_mod_cas)
	1008	CALL iophys_ecrit('u',klev,'u','m/s',u)
	1009	CALL iophys_ecrit('unud',klev,'unud','m/s',u_nudg_mod_cas)
	1010	CALL iophys_ecrit('v',klev,'v','m/s',v)
	1011	CALL iophys_ecrit('vnud',klev,'vnud','m/s',v_nudg_mod_cas)
[3595]	1012	CALL iophys_ecrit('temp',klev,'temp','K',temp)
	1013	CALL iophys_ecrit('tempnud',klev,'temp_nudg_mod_cas','K',temp_nudg_mod_cas)
[3594]	1014	CALL iophys_ecrit('dtnud',klev,'dtnud','K/day',86400*d_t_nudge)
	1015	CALL iophys_ecrit('dqnud',klev,'dqnud','K/day',100086400d_q_nudge(:,1))
[3595]	1016	#endif
[3593]	1017
[3541]	1018	IF (flag_inhib_forcing == 0) then ! if tendency of forcings should be added
	1019
	1020	u(1:mxcalc)=u(1:mxcalc) + timestep*( &
	1021	& du_phys(1:mxcalc) &
[3693]	1022	& +d_u_age(1:mxcalc)+d_u_adv(1:mxcalc) &
[3541]	1023	& +d_u_nudge(1:mxcalc) )
	1024	v(1:mxcalc)=v(1:mxcalc) + timestep*( &
	1025	& dv_phys(1:mxcalc) &
[3693]	1026	& +d_v_age(1:mxcalc)+d_v_adv(1:mxcalc) &
[3541]	1027	& +d_v_nudge(1:mxcalc) )
	1028	q(1:mxcalc,:)=q(1:mxcalc,:)+timestep*( &
	1029	& dq(1:mxcalc,:) &
	1030	& +d_q_adv(1:mxcalc,:) &
	1031	& +d_q_nudge(1:mxcalc,:) )
	1032
	1033	if (prt_level.ge.3) then
	1034	print *, &
	1035	& 'physiq-> temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1) ', &
	1036	& temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1)
	1037	print* ,'dv_phys=',dv_phys
[3693]	1038	print* ,'d_v_age=',d_v_age
	1039	print* ,'d_v_adv=',d_v_adv
[3541]	1040	print* ,'d_v_nudge=',d_v_nudge
	1041	print*, v
	1042	print*, vg
	1043	endif
	1044
	1045	temp(1:mxcalc)=temp(1:mxcalc)+timestep*( &
	1046	& dt_phys(1:mxcalc) &
[3780]	1047	& +d_t_adv(1:mxcalc) &
	1048	& +d_t_nudge(1:mxcalc) &
[3541]	1049	& +dt_cooling(1:mxcalc)) ! Taux de chauffage ou refroid.
	1050
	1051
[3780]	1052	!=======================================================================
[3592]	1053	!! CONSERVE EN ATTENDANT QUE LE CAS EN QUESTION FONCTIONNE EN STD !!
[3780]	1054	!=======================================================================
[3592]	1055
[3541]	1056	teta=temp(pzero/play)*rkappa
[3780]	1057
[3541]	1058	!---------------------------------------------------------------------
	1059	! Nudge soil temperature if requested
	1060	!---------------------------------------------------------------------
	1061
	1062	IF (nudge_tsoil .AND. .NOT. lastcall) THEN
	1063	ftsoil(1,isoil_nudge,:) = ftsoil(1,isoil_nudge,:) &
	1064	& -timestep/tau_soil_nudge*(ftsoil(1,isoil_nudge,:)-Tsoil_nudge)
	1065	ENDIF
	1066
	1067	!---------------------------------------------------------------------
	1068	! Add large-scale tendencies (advection, etc) :
	1069	!---------------------------------------------------------------------
	1070
	1071	!cc nrlmd
	1072	!cc tmpvar=teta
	1073	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
	1074	!cc
	1075	!cc teta(1:mxcalc)=tmpvar(1:mxcalc)
	1076	!cc tmpvar(:)=q(:,1)
	1077	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
	1078	!cc q(1:mxcalc,1)=tmpvar(1:mxcalc)
	1079	!cc tmpvar(:)=q(:,2)
	1080	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
	1081	!cc q(1:mxcalc,2)=tmpvar(1:mxcalc)
	1082
	1083	END IF ! end if tendency of tendency should be added
	1084
	1085	!---------------------------------------------------------------------
	1086	! Air temperature :
	1087	!---------------------------------------------------------------------
	1088	if (lastcall) then
	1089	print*,'Pas de temps final ',it
	1090	call ju2ymds(daytime, an, mois, jour, heure)
	1091	print*,'a la date : a m j h',an, mois, jour ,heure/3600.
	1092	endif
	1093
	1094	! incremente day time
	1095	daytime = daytime+1./day_step
	1096	day = int(daytime+0.1/day_step)
	1097	! time = max(daytime-day,0.0)
	1098	!Al1&jyg: correction de bug
	1099	!cc time = real(mod(it,day_step))/day_step
	1100	time = time_ini/24.+real(mod(it,day_step))/day_step
	1101	it=it+1
	1102
	1103	enddo
	1104
	1105	if (ecrit_slab_oc.ne.-1) close(97)
	1106
	1107	!Al1 Call to 1D equivalent of dynredem (an,mois,jour,heure ?)
[3780]	1108	! ---------------------------------------------------------------------------
[3541]	1109	call dyn1dredem("restart1dyn.nc", &
	1110	& plev,play,phi,phis,presnivs, &
	1111	& u,v,temp,q,omega2)
	1112
	1113	CALL abort_gcm ('lmdz1d ','The End ',0)
	1114
	1115	END SUBROUTINE scm

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format