Context Navigation

old_lmdz1d.f90 @ 5446

Last change on this file since 5446 was 5368, checked in by abarral, 3 weeks ago
(WIP) Turn implicit into explicit declarations Turn 1dconv.h into a module to that end
File size: 51.3 KB

Line
1	!
2	! $Id: lmdz1d.F90 3540 2019-06-25 14:50:13Z fairhead $
3	!
4
5	SUBROUTINE old_lmdz1d
6
7	USE flux_arp_mod_h
8	USE compbl_mod_h
9	USE clesphys_mod_h
10	USE ioipsl, only: ju2ymds, ymds2ju, ioconf_calendar,getin
11	USE phys_state_var_mod, ONLY : phys_state_var_init, phys_state_var_end, &
12	clwcon, detr_therm, &
13	qsol, fevap, z0m, z0h, agesno, &
14	du_gwd_rando, du_gwd_front, entr_therm, f0, fm_therm, &
15	falb_dir, falb_dif, &
16	ftsol, beta_aridity, pbl_tke, pctsrf, radsol, rain_fall, snow_fall, ratqs, &
17	rnebcon, rugoro, sig1, w01, solaire_etat0, sollw, sollwdown, &
18	solsw, solswfdiff, t_ancien, q_ancien, u_ancien, v_ancien, &
19	wake_delta_pbl_TKE, delta_tsurf, wake_fip, wake_pe, &
20	wake_deltaq, wake_deltat, wake_s, awake_s, wake_dens, &
21	awake_dens, cv_gen, wake_cstar, &
22	zgam, zmax0, zmea, zpic, zsig, &
23	zstd, zthe, zval, ale_bl, ale_bl_trig, alp_bl, &
24	ql_ancien, qs_ancien, qbs_ancien, cf_ancien, rvc_ancien, &
25	prlw_ancien, prsw_ancien, prbsw_ancien, prw_ancien, &
26	u10m,v10m,ale_wake,ale_bl_stat
27
28
29	USE dimphy
30	USE surface_data, only : type_ocean,ok_veget
31	USE pbl_surface_mod, only : ftsoil, pbl_surface_init, &
32	pbl_surface_final
33	USE fonte_neige_mod, only : fonte_neige_init, fonte_neige_final
34
35	USE infotrac ! new
36	USE control_mod
37	USE indice_sol_mod
38	USE phyaqua_mod
39	! USE mod_1D_cases_read
40	USE mod_1D_cases_read2
41	USE mod_1D_amma_read
42	USE print_control_mod, ONLY: lunout, prt_level
43	USE iniphysiq_mod, ONLY: iniphysiq
44	USE mod_const_mpi, ONLY: comm_lmdz
45	USE physiq_mod, ONLY: physiq
46	USE comvert_mod, ONLY: presnivs, ap, bp, dpres,nivsig, nivsigs, pa, &
47	preff, aps, bps, pseudoalt, scaleheight
48	USE temps_mod, ONLY: annee_ref, calend, day_end, day_ini, day_ref, &
49	itau_dyn, itau_phy, start_time, year_len
50	USE phys_cal_mod, ONLY : year_len_phys_cal_mod => year_len
51	USE lmdz_cppkeys_wrapper, ONLY: CPPKEY_OUTPUTPHYSSCM
52
53	USE dimensions_mod, ONLY: iim, jjm, llm, ndm
54	USE dimsoil_mod_h, ONLY: nsoilmx
55	USE yomcst_mod_h
56	USE tsoilnudge_mod_h
57	USE fcg_gcssold_mod_h
58	USE compar1d_mod_h
59	USE date_cas_mod_h
60	USE m_1dconv_mod_h, ONLY: get_uvd, get_uvd2, copie
61	implicit none
62
63	!!! INCLUDE "fbforcing.h"
64
65	!=====================================================================
66	! DECLARATIONS
67	!=====================================================================
68
69	!---------------------------------------------------------------------
70	! Externals
71	!---------------------------------------------------------------------
72	external fq_sat
73	real fq_sat
74
75	!---------------------------------------------------------------------
76	! Arguments d' initialisations de la physique (USER DEFINE)
77	!---------------------------------------------------------------------
78
79	integer, parameter :: ngrid=1
80	real :: zcufi = 1.
81	real :: zcvfi = 1.
82
83	!- real :: nat_surf
84	!- logical :: ok_flux_surf
85	!- real :: fsens
86	!- real :: flat
87	!- real :: tsurf
88	!- real :: rugos
89	!- real :: qsol(1:2)
90	!- real :: qsurf
91	!- real :: psurf
92	!- real :: zsurf
93	!- real :: albedo
94	!-
95	!- real :: time = 0.
96	!- real :: time_ini
97	!- real :: xlat
98	!- real :: xlon
99	!- real :: wtsurf
100	!- real :: wqsurf
101	!- real :: restart_runoff
102	!- real :: xagesno
103	!- real :: qsolinp
104	!- real :: zpicinp
105	!-
106	real :: fnday
107	real :: day, daytime
108	real :: day1
109	real :: heure
110	integer :: jour
111	integer :: mois
112	integer :: an
113
114	!---------------------------------------------------------------------
115	! Declarations related to forcing and initial profiles
116	!---------------------------------------------------------------------
117
118	integer :: kmax = llm
119	integer llm700,nq1,nq2
120	INTEGER, PARAMETER :: nlev_max=1000, nqmx=1000
121	real timestep, frac
122	real height(nlev_max),tttprof(nlev_max),qtprof(nlev_max)
123	real uprof(nlev_max),vprof(nlev_max),e12prof(nlev_max)
124	real ugprof(nlev_max),vgprof(nlev_max),wfls(nlev_max)
125	real dqtdxls(nlev_max),dqtdyls(nlev_max)
126	real dqtdtls(nlev_max),thlpcar(nlev_max)
127	real qprof(nlev_max,nqmx)
128
129	! integer :: forcing_type
130	logical :: forcing_les = .false.
131	logical :: forcing_armcu = .false.
132	logical :: forcing_rico = .false.
133	logical :: forcing_radconv = .false.
134	logical :: forcing_toga = .false.
135	logical :: forcing_twpice = .false.
136	logical :: forcing_amma = .false.
137	logical :: forcing_dice = .false.
138	logical :: forcing_gabls4 = .false.
139
140	logical :: forcing_GCM2SCM = .false.
141	logical :: forcing_GCSSold = .false.
142	logical :: forcing_sandu = .false.
143	logical :: forcing_astex = .false.
144	logical :: forcing_fire = .false.
145	logical :: forcing_case = .false.
146	logical :: forcing_case2 = .false.
147	logical :: forcing_SCM = .false.
148	integer :: type_ts_forcing ! 0 = SST constant; 1 = SST read from a file
149	! (cf read_tsurf1d.F)
150
151	real wwww
152	!vertical advection computation
153	! real d_t_z(llm), d_q_z(llm)
154	! real d_t_dyn_z(llm), dq_dyn_z(llm)
155	! real zz(llm)
156	! real zfact
157
158	!flag forcings
159	logical :: nudge_wind=.true.
160	logical :: nudge_thermo=.false.
161	logical :: cptadvw=.true.
162	!=====================================================================
163	! DECLARATIONS FOR EACH CASE
164	!=====================================================================
165	!
166	INCLUDE "old_1D_decl_cases.h"
167	!
168	!---------------------------------------------------------------------
169	! Declarations related to nudging
170	!---------------------------------------------------------------------
171	integer :: nudge_max
172	parameter (nudge_max=9)
173	integer :: inudge_RHT=1
174	integer :: inudge_UV=2
175	logical :: nudge(nudge_max)
176	real :: t_targ(llm)
177	real :: rh_targ(llm)
178	real :: u_targ(llm)
179	real :: v_targ(llm)
180	!
181	!---------------------------------------------------------------------
182	! Declarations related to vertical discretization:
183	!---------------------------------------------------------------------
184	real :: pzero=1.e5
185	real :: play (llm),zlay (llm),sig_s(llm),plev(llm+1)
186	real :: playd(llm),zlayd(llm),ap_amma(llm+1),bp_amma(llm+1)
187
188	!---------------------------------------------------------------------
189	! Declarations related to variables
190	!---------------------------------------------------------------------
191
192	real :: phi(llm)
193	real :: teta(llm),tetal(llm),temp(llm),u(llm),v(llm),w(llm)
194	REAL rot(1, llm) ! relative vorticity, in s-1
195	real :: rlat_rad(1),rlon_rad(1)
196	real :: omega(llm+1),omega2(llm),rho(llm+1)
197	real :: ug(llm),vg(llm),fcoriolis
198	real :: sfdt, cfdt
199	real :: du_phys(llm),dv_phys(llm),dt_phys(llm)
200	real :: dt_dyn(llm)
201	real :: dt_cooling(llm),d_t_adv(llm),d_t_nudge(llm)
202	real :: d_u_nudge(llm),d_v_nudge(llm)
203	real :: du_adv(llm),dv_adv(llm)
204	real :: du_age(llm),dv_age(llm)
205	real :: alpha
206	real :: ttt
207
208	REAL, ALLOCATABLE, DIMENSION(:,:):: q
209	REAL, ALLOCATABLE, DIMENSION(:,:):: dq
210	REAL, ALLOCATABLE, DIMENSION(:,:):: dq_dyn
211	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_adv
212	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_nudge
213	! REAL, ALLOCATABLE, DIMENSION(:):: d_th_adv
214
215	!---------------------------------------------------------------------
216	! Initialization of surface variables
217	!---------------------------------------------------------------------
218	real :: run_off_lic_0(1)
219	real :: fder(1),snsrf(1,nbsrf),qsurfsrf(1,nbsrf)
220	real :: tsoil(1,nsoilmx,nbsrf)
221	! real :: agesno(1,nbsrf)
222
223	!---------------------------------------------------------------------
224	! Call to phyredem
225	!---------------------------------------------------------------------
226	logical :: ok_writedem =.true.
227	real :: sollw_in = 0.
228	real :: solsw_in = 0.
229
230	!---------------------------------------------------------------------
231	! Call to physiq
232	!---------------------------------------------------------------------
233	logical :: firstcall=.true.
234	logical :: lastcall=.false.
235	real :: phis(1) = 0.0
236	real :: dpsrf(1)
237
238	!---------------------------------------------------------------------
239	! Initializations of boundary conditions
240	!---------------------------------------------------------------------
241	real, allocatable :: phy_nat (:) ! 0=ocean libre,1=land,2=glacier,3=banquise
242	real, allocatable :: phy_alb (:) ! Albedo land only (old value condsurf_jyg=0.3)
243	real, allocatable :: phy_sst (:) ! SST (will not be used; cf read_tsurf1d.F)
244	real, allocatable :: phy_bil (:) ! Ne sert que pour les slab_ocean
245	real, allocatable :: phy_rug (:) ! Longueur rugosite utilisee sur land only
246	real, allocatable :: phy_ice (:) ! Fraction de glace
247	real, allocatable :: phy_fter(:) ! Fraction de terre
248	real, allocatable :: phy_foce(:) ! Fraction de ocean
249	real, allocatable :: phy_fsic(:) ! Fraction de glace
250	real, allocatable :: phy_flic(:) ! Fraction de glace
251
252	!---------------------------------------------------------------------
253	! Fichiers et d'autres variables
254	!---------------------------------------------------------------------
255	integer :: k,l,i,it=1,mxcalc
256	integer :: nsrf
257	integer jcode
258	INTEGER read_climoz
259	!
260	integer :: it_end ! iteration number of the last call
261	!Al1
262	integer ecrit_slab_oc !1=ecrit,-1=lit,0=no file
263	data ecrit_slab_oc/-1/
264	!
265	! if flag_inhib_forcing = 0, tendencies of forcing are added
266	! <> 0, tendencies of forcing are not added
267	INTEGER :: flag_inhib_forcing = 0
268
269	!=====================================================================
270	! INITIALIZATIONS
271	!=====================================================================
272	du_phys(:)=0.
273	dv_phys(:)=0.
274	dt_phys(:)=0.
275	dt_dyn(:)=0.
276	dt_cooling(:)=0.
277	d_t_adv(:)=0.
278	d_t_nudge(:)=0.
279	d_u_nudge(:)=0.
280	d_v_nudge(:)=0.
281	du_adv(:)=0.
282	dv_adv(:)=0.
283	du_age(:)=0.
284	dv_age(:)=0.
285
286	! Initialization of Common turb_forcing
287	dtime_frcg = 0.
288	Turb_fcg_gcssold=.false.
289	hthturb_gcssold = 0.
290	hqturb_gcssold = 0.
291
292
293
294
295	!---------------------------------------------------------------------
296	! OPTIONS OF THE 1D SIMULATION (lmdz1d.def => unicol.def)
297	!---------------------------------------------------------------------
298	!Al1
299	call conf_unicol
300	!Al1 moves this gcssold var from common fcg_gcssold to
301	Turb_fcg_gcssold = xTurb_fcg_gcssold
302	! --------------------------------------------------------------------
303	close(1)
304	!Al1
305	write(,) 'lmdz1d.def lu => unicol.def'
306
307	! forcing_type defines the way the SCM is forced:
308	!forcing_type = 0 ==> forcing_les = .true.
309	! initial profiles from file prof.inp.001
310	! no forcing by LS convergence ;
311	! surface temperature imposed ;
312	! radiative cooling may be imposed (iflag_radia=0 in physiq.def)
313	!forcing_type = 1 ==> forcing_radconv = .true.
314	! idem forcing_type = 0, but the imposed radiative cooling
315	! is set to 0 (hence, if iflag_radia=0 in physiq.def,
316	! then there is no radiative cooling at all)
317	!forcing_type = 2 ==> forcing_toga = .true.
318	! initial profiles from TOGA-COARE IFA files
319	! LS convergence and SST imposed from TOGA-COARE IFA files
320	!forcing_type = 3 ==> forcing_GCM2SCM = .true.
321	! initial profiles from the GCM output
322	! LS convergence imposed from the GCM output
323	!forcing_type = 4 ==> forcing_twpice = .true.
324	! initial profiles from TWP-ICE cdf file
325	! LS convergence, omega and SST imposed from TWP-ICE files
326	!forcing_type = 5 ==> forcing_rico = .true.
327	! initial profiles from RICO files
328	! LS convergence imposed from RICO files
329	!forcing_type = 6 ==> forcing_amma = .true.
330	! initial profiles from AMMA nc file
331	! LS convergence, omega and surface fluxes imposed from AMMA file
332	!forcing_type = 7 ==> forcing_dice = .true.
333	! initial profiles and large scale forcings in dice_driver.nc
334	! Different stages: soil model alone, atm. model alone
335	! then both models coupled
336	!forcing_type = 8 ==> forcing_gabls4 = .true.
337	! initial profiles and large scale forcings in gabls4_driver.nc
338	!forcing_type >= 100 ==> forcing_case = .true.
339	! initial profiles and large scale forcings in cas.nc
340	! LS convergence, omega and SST imposed from CINDY-DYNAMO files
341	! 101=cindynamo
342	! 102=bomex
343	!forcing_type >= 100 ==> forcing_case2 = .true.
344	! temporary flag while all the 1D cases are not whith the same cas.nc forcing file
345	! 103=arm_cu2 ie arm_cu with new forcing format
346	! 104=rico2 ie rico with new forcing format
347	!forcing_type = 40 ==> forcing_GCSSold = .true.
348	! initial profile from GCSS file
349	! LS convergence imposed from GCSS file
350	!forcing_type = 50 ==> forcing_fire = .true.
351	! forcing from fire.nc
352	!forcing_type = 59 ==> forcing_sandu = .true.
353	! initial profiles from sanduref file: see prof.inp.001
354	! SST varying with time and divergence constante: see ifa_sanduref.txt file
355	! Radiation has to be computed interactively
356	!forcing_type = 60 ==> forcing_astex = .true.
357	! initial profiles from file: see prof.inp.001
358	! SST,divergence,ug,vg,ufa,vfa varying with time : see ifa_astex.txt file
359	! Radiation has to be computed interactively
360	!forcing_type = 61 ==> forcing_armcu = .true.
361	! initial profiles from file: see prof.inp.001
362	! sensible and latent heat flux imposed: see ifa_arm_cu_1.txt
363	! large scale advective forcing & radiative tendencies applied below 1000m: see ifa_arm_cu_2.txt
364	! use geostrophic wind ug=10m/s vg=0m/s. Duration of the case 53100s
365	! Radiation to be switched off
366	!
367	if (forcing_type <=0) THEN
368	forcing_les = .true.
369	elseif (forcing_type .eq.1) THEN
370	forcing_radconv = .true.
371	elseif (forcing_type .eq.2) THEN
372	forcing_toga = .true.
373	elseif (forcing_type .eq.3) THEN
374	forcing_GCM2SCM = .true.
375	elseif (forcing_type .eq.4) THEN
376	forcing_twpice = .true.
377	elseif (forcing_type .eq.5) THEN
378	forcing_rico = .true.
379	elseif (forcing_type .eq.6) THEN
380	forcing_amma = .true.
381	elseif (forcing_type .eq.7) THEN
382	forcing_dice = .true.
383	elseif (forcing_type .eq.8) THEN
384	forcing_gabls4 = .true.
385	elseif (forcing_type .eq.101) THEN ! Cindynamo starts 1-10-2011 0h
386	forcing_case = .true.
387	year_ini_cas=2011
388	mth_ini_cas=10
389	day_deb=1
390	heure_ini_cas=0.
391	pdt_cas=3*3600. ! forcing frequency
392	elseif (forcing_type .eq.102) THEN ! Bomex starts 24-6-1969 0h
393	forcing_case = .true.
394	year_ini_cas=1969
395	mth_ini_cas=6
396	day_deb=24
397	heure_ini_cas=0.
398	pdt_cas=1800. ! forcing frequency
399	elseif (forcing_type .eq.103) THEN ! Arm_cu starts 21-6-1997 11h30
400	forcing_case2 = .true.
401	year_ini_cas=1997
402	mth_ini_cas=6
403	day_deb=21
404	heure_ini_cas=11.5
405	pdt_cas=1800. ! forcing frequency
406	elseif (forcing_type .eq.104) THEN ! rico starts 16-12-2004 0h
407	forcing_case2 = .true.
408	year_ini_cas=2004
409	mth_ini_cas=12
410	day_deb=16
411	heure_ini_cas=0.
412	pdt_cas=1800. ! forcing frequency
413	elseif (forcing_type .eq.105) THEN ! bomex starts 16-12-2004 0h
414	forcing_case2 = .true.
415	year_ini_cas=1969
416	mth_ini_cas=6
417	day_deb=24
418	heure_ini_cas=0.
419	pdt_cas=1800. ! forcing frequency
420	elseif (forcing_type .eq.106) THEN ! ayotte_24SC starts 6-11-1992 0h
421	forcing_case2 = .true.
422	year_ini_cas=1992
423	mth_ini_cas=11
424	day_deb=6
425	heure_ini_cas=10.
426	pdt_cas=86400. ! forcing frequency
427	elseif (forcing_type .eq.113) THEN ! Arm_cu starts 21-6-1997 11h30
428	forcing_SCM = .true.
429	year_ini_cas=1997
430	! It is possible that those parameters are run twice.
431	call getin('anneeref',year_ini_cas)
432	call getin('dayref',day_deb)
433	mth_ini_cas=1 ! pour le moment on compte depuis le debut de l'annee
434	call getin('time_ini',heure_ini_cas)
435	elseif (forcing_type .eq.40) THEN
436	forcing_GCSSold = .true.
437	elseif (forcing_type .eq.50) THEN
438	forcing_fire = .true.
439	elseif (forcing_type .eq.59) THEN
440	forcing_sandu = .true.
441	elseif (forcing_type .eq.60) THEN
442	forcing_astex = .true.
443	elseif (forcing_type .eq.61) THEN
444	forcing_armcu = .true.
445	IF(llm.NE.19.AND.llm.NE.40) stop 'Erreur nombre de niveaux !!'
446	else
447	write (,) 'ERROR : unknown forcing_type ', forcing_type
448	stop 'Forcing_type should be 0,1,2,3,4,5,6 or 40,59,60,61'
449	ENDIF
450	print*,"forcing type=",forcing_type
451
452	! if type_ts_forcing=0, the surface temp of 1D simulation is constant in time
453	! (specified by tsurf in lmdz1d.def); if type_ts_forcing=1, the surface temperature
454	! varies in time according to a forcing (e.g. forcing_toga) and is passed to read_tsurf1d.F
455	! through the common sst_forcing.
456
457	type_ts_forcing = 0
458	if (forcing_toga.or.forcing_sandu.or.forcing_astex .or. forcing_dice) &
459	& type_ts_forcing = 1
460	!
461	! Initialization of the logical switch for nudging
462	jcode = iflag_nudge
463	do i = 1,nudge_max
464	nudge(i) = mod(jcode,10) .ge. 1
465	jcode = jcode/10
466	enddo
467	!---------------------------------------------------------------------
468	! Definition of the run
469	!---------------------------------------------------------------------
470
471	call conf_gcm( 99, .TRUE. )
472
473	!-----------------------------------------------------------------------
474	allocate( phy_nat (year_len)) ! 0=ocean libre,1=land,2=glacier,3=banquise
475	phy_nat(:)=0.0
476	allocate( phy_alb (year_len)) ! Albedo land only (old value condsurf_jyg=0.3)
477	allocate( phy_sst (year_len)) ! SST (will not be used; cf read_tsurf1d.F)
478	allocate( phy_bil (year_len)) ! Ne sert que pour les slab_ocean
479	phy_bil(:)=1.0
480	allocate( phy_rug (year_len)) ! Longueur rugosite utilisee sur land only
481	allocate( phy_ice (year_len)) ! Fraction de glace
482	phy_ice(:)=0.0
483	allocate( phy_fter(year_len)) ! Fraction de terre
484	phy_fter(:)=0.0
485	allocate( phy_foce(year_len)) ! Fraction de ocean
486	phy_foce(:)=0.0
487	allocate( phy_fsic(year_len)) ! Fraction de glace
488	phy_fsic(:)=0.0
489	allocate( phy_flic(year_len)) ! Fraction de glace
490	phy_flic(:)=0.0
491	!-----------------------------------------------------------------------
492	! Choix du calendrier
493	! -------------------
494
495	! calend = 'earth_365d'
496	if (calend == 'earth_360d') then
497	call ioconf_calendar('360_day')
498	write(,)'CALENDRIER CHOISI: Terrestre a 360 jours/an'
499	else if (calend == 'earth_365d') then
500	call ioconf_calendar('noleap')
501	write(,)'CALENDRIER CHOISI: Terrestre a 365 jours/an'
502	else if (calend == 'earth_366d') then
503	call ioconf_calendar('all_leap')
504	write(,)'CALENDRIER CHOISI: Terrestre bissextile'
505	else if (calend == 'gregorian') then
506	stop 'gregorian calend should not be used by normal user'
507	call ioconf_calendar('gregorian') ! not to be used by normal users
508	write(,)'CALENDRIER CHOISI: Gregorien'
509	else
510	write (,) 'ERROR : unknown calendar ', calend
511	stop 'calend should be 360d,earth_365d,earth_366d,gregorian'
512	endif
513	!-----------------------------------------------------------------------
514	!
515	!c Date :
516	! La date est supposee donnee sous la forme [annee, numero du jour dans
517	! l annee] ; l heure est donnee dans time_ini, lu dans lmdz1d.def.
518	! On appelle ymds2ju pour convertir [annee, jour] en [jour Julien].
519	! Le numero du jour est dans "day". L heure est traitee separement.
520	! La date complete est dans "daytime" (l'unite est le jour).
521	if (nday>0) then
522	fnday=nday
523	else
524	fnday=-nday/float(day_step)
525	endif
526	print *,'fnday=',fnday
527	! start_time doit etre en FRACTION DE JOUR
528	start_time=time_ini/24.
529
530	! Special case for arm_cu which lasts less than one day : 53100s !! (MPL 20111026)
531	IF(forcing_type .EQ. 61) fnday=53100./86400.
532	IF(forcing_type .EQ. 103) fnday=53100./86400.
533	! Special case for amma which lasts less than one day : 64800s !! (MPL 20120216)
534	IF(forcing_type .EQ. 6) fnday=64800./86400.
535	! IF(forcing_type .EQ. 6) fnday=50400./86400.
536	IF(forcing_type .EQ. 8 ) fnday=129600./86400.
537	annee_ref = anneeref
538	mois = 1
539	day_ref = dayref
540	heure = 0.
541	itau_dyn = 0
542	itau_phy = 0
543	call ymds2ju(annee_ref,mois,day_ref,heure,day)
544	day_ini = int(day)
545	day_end = day_ini + int(fnday)
546
547	IF (forcing_type .eq.2) THEN
548	! Convert the initial date of Toga-Coare to Julian day
549	call ymds2ju &
550	& (year_ini_toga,mth_ini_toga,day_ini_toga,heure,day_ju_ini_toga)
551
552	ELSEIF (forcing_type .eq.4) THEN
553	! Convert the initial date of TWPICE to Julian day
554	call ymds2ju &
555	& (year_ini_twpi,mth_ini_twpi,day_ini_twpi,heure_ini_twpi &
556	& ,day_ju_ini_twpi)
557	ELSEIF (forcing_type .eq.6) THEN
558	! Convert the initial date of AMMA to Julian day
559	call ymds2ju &
560	& (year_ini_amma,mth_ini_amma,day_ini_amma,heure_ini_amma &
561	& ,day_ju_ini_amma)
562	ELSEIF (forcing_type .eq.7) THEN
563	! Convert the initial date of DICE to Julian day
564	call ymds2ju &
565	& (year_ini_dice,mth_ini_dice,day_ini_dice,heure_ini_dice &
566	& ,day_ju_ini_dice)
567	ELSEIF (forcing_type .eq.8 ) THEN
568	! Convert the initial date of GABLS4 to Julian day
569	call ymds2ju &
570	& (year_ini_gabls4,mth_ini_gabls4,day_ini_gabls4,heure_ini_gabls4 &
571	& ,day_ju_ini_gabls4)
572	ELSEIF (forcing_type .gt.100) THEN
573	! Convert the initial date to Julian day
574	day_ini_cas=day_deb
575	print*,'time case',year_ini_cas,mth_ini_cas,day_ini_cas
576	call ymds2ju &
577	& (year_ini_cas,mth_ini_cas,day_ini_cas,heure_ini_cas*3600 &
578	& ,day_ju_ini_cas)
579	print*,'time case 2',day_ini_cas,day_ju_ini_cas
580	ELSEIF (forcing_type .eq.59) THEN
581	! Convert the initial date of Sandu case to Julian day
582	call ymds2ju &
583	& (year_ini_sandu,mth_ini_sandu,day_ini_sandu, &
584	& time_ini*3600.,day_ju_ini_sandu)
585
586	ELSEIF (forcing_type .eq.60) THEN
587	! Convert the initial date of Astex case to Julian day
588	call ymds2ju &
589	& (year_ini_astex,mth_ini_astex,day_ini_astex, &
590	& time_ini*3600.,day_ju_ini_astex)
591
592	ELSEIF (forcing_type .eq.61) THEN
593	! Convert the initial date of Arm_cu case to Julian day
594	call ymds2ju &
595	& (year_ini_armcu,mth_ini_armcu,day_ini_armcu,heure_ini_armcu &
596	& ,day_ju_ini_armcu)
597	ENDIF
598
599	IF (forcing_type .gt.100) THEN
600	daytime = day + heure_ini_cas/24. ! 1st day and initial time of the simulation
601	ELSE
602	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
603	ENDIF
604	! Print out the actual date of the beginning of the simulation :
605	call ju2ymds(daytime,year_print, month_print,day_print,sec_print)
606	print *,' Time of beginning : ', &
607	& year_print, month_print, day_print, sec_print
608
609	!---------------------------------------------------------------------
610	! Initialization of dimensions, geometry and initial state
611	!---------------------------------------------------------------------
612	! call init_phys_lmdz(1,1,llm,1,(/1/)) ! job now done via iniphysiq
613	! but we still need to initialize dimphy module (klon,klev,etc.) here.
614	call init_dimphy1D(1,llm)
615	call suphel
616	call init_infotrac
617
618	if (nqtot>nqmx) STOP 'Augmenter nqmx dans lmdz1d.F'
619	allocate(q(llm,nqtot)) ; q(:,:)=0.
620	allocate(dq(llm,nqtot))
621	allocate(dq_dyn(llm,nqtot))
622	allocate(d_q_adv(llm,nqtot))
623	allocate(d_q_nudge(llm,nqtot))
624	! allocate(d_th_adv(llm))
625
626	q(:,:) = 0.
627	dq(:,:) = 0.
628	dq_dyn(:,:) = 0.
629	d_q_adv(:,:) = 0.
630	d_q_nudge(:,:) = 0.
631
632	!
633	! No ozone climatology need be read in this pre-initialization
634	! (phys_state_var_init is called again in physiq)
635	read_climoz = 0
636	nsw=6 ! EV et LF: sinon, falb_dir et falb_dif ne peuvent etre alloues
637
638
639	call phys_state_var_init(read_climoz)
640
641	if (ngrid.ne.klon) then
642	print*,'stop in inifis'
643	print*,'Probleme de dimensions :'
644	print*,'ngrid = ',ngrid
645	print*,'klon = ',klon
646	stop
647	endif
648	!!!=====================================================================
649	!!! Feedback forcing values for Gateaux differentiation (al1)
650	!!!=====================================================================
651	!!! Surface Planck forcing bracketing call radiation
652	!! surf_Planck = 0.
653	!! surf_Conv = 0.
654	!! write(,) 'Gateaux-dif Planck,Conv:',surf_Planck,surf_Conv
655	!!! a mettre dans le lmdz1d.def ou autre
656	!!
657	!!
658	qsol = qsolinp
659	qsurf = fq_sat(tsurf,psurf/100.)
660	beta_surf = 1.
661	beta_aridity(:,:) = beta_surf
662	day1= day_ini
663	time=daytime-day
664	ts_toga(1)=tsurf ! needed by read_tsurf1d.F
665	rho(1)=psurf/(rdtsurf(1.+(rv/rd-1.)*qsurf))
666
667	!
668	!! mpl et jyg le 22/08/2012 :
669	!! pour que les cas a flux de surface imposes marchent
670	IF(.NOT.ok_flux_surf.or.max(abs(wtsurf),abs(wqsurf))>0.) THEN
671	fsens=-wtsurfrcpdrho(1)
672	flat=-wqsurfrlvttrho(1)
673	print *,'Flux: ok_flux wtsurf wqsurf',ok_flux_surf,wtsurf,wqsurf
674	ENDIF
675	print*,'Flux sol ',fsens,flat
676	!! ok_flux_surf=.false.
677	!! fsens=-wtsurfrcpdrho(1)
678	!! flat=-wqsurfrlvttrho(1)
679	!!!!
680
681	! Vertical discretization and pressure levels at half and mid levels:
682
683	pa = 5e4
684	!! preff= 1.01325e5
685	preff = psurf
686	IF (ok_old_disvert) THEN
687	call disvert0(pa,preff,ap,bp,dpres,presnivs,nivsigs,nivsig)
688	print *,'On utilise disvert0'
689	aps(1:llm)=0.5*(ap(1:llm)+ap(2:llm+1))
690	bps(1:llm)=0.5*(bp(1:llm)+bp(2:llm+1))
691	scaleheight=8.
692	pseudoalt(1:llm)=-scaleheight*log(presnivs(1:llm)/preff)
693	ELSE
694	call disvert()
695	print *,'On utilise disvert'
696	! Nouvelle version disvert permettant d imposer ap,bp (modif L.Guez) MPL 18092012
697	! Dans ce cas, on lit ap,bp dans le fichier hybrid.txt
698	ENDIF
699
700	sig_s=presnivs/preff
701	plev =ap+bp*psurf
702	play = 0.5*(plev(1:llm)+plev(2:llm+1))
703	zlay=-rd300.log(play/psurf)/rg ! moved after reading profiles
704
705	IF (forcing_type .eq. 59) THEN
706	! pour forcing_sandu, on cherche l'indice le plus proche de 700hpa#3000m
707	write(,) '***********************'
708	do l = 1, llm
709	write(,) 'l,play(l),presnivs(l): ',l,play(l),presnivs(l)
710	if (trouve_700 .and. play(l).le.70000) then
711	llm700=l
712	print *,'llm700,play=',llm700,play(l)/100.
713	trouve_700= .false.
714	endif
715	enddo
716	write(,) '***********************'
717	ENDIF
718
719	!
720	!=====================================================================
721	! EVENTUALLY, READ FORCING DATA :
722	!=====================================================================
723
724	INCLUDE "old_1D_read_forc_cases.h"
725
726	if (forcing_GCM2SCM) then
727	write (,) 'forcing_GCM2SCM not yet implemented'
728	stop 'in initialization'
729	endif ! forcing_GCM2SCM
730
731	print*,'mxcalc=',mxcalc
732	! print*,'zlay=',zlay(mxcalc)
733	print*,'play=',play(mxcalc)
734
735	!Al1 pour SST forced, appell?? depuis ocean_forced_noice
736	! EV tg instead of ts_cur
737
738	tg = tsurf ! SST used in read_tsurf1d
739	!=====================================================================
740	! Initialisation de la physique :
741	!=====================================================================
742
743	! Rq: conf_phys.F90 lit tous les flags de physiq.def; conf_phys appele depuis physiq.F
744	!
745	! day_step, iphysiq lus dans gcm.def ci-dessus
746	! timestep: calcule ci-dessous from rday et day_step
747	! ngrid=1
748	! llm: defini dans .../modipsl/modeles/LMDZ4/libf/grid/dimension
749	! rday: defini dans suphel.F (86400.)
750	! day_ini: lu dans run.def (dayref)
751	! rlat_rad,rlon-rad: transformes en radian de rlat,rlon lus dans lmdz1d.def (en degres)
752	! airefi,zcufi,zcvfi initialises au debut de ce programme
753	! rday,ra,rg,rd,rcpd declares dans YOMCST.h et calcules dans suphel.F
754	day_step = float(nsplit_phys)*day_step/float(iphysiq)
755	write (,) 'Time step divided by nsplit_phys (=',nsplit_phys,')'
756	timestep =rday/day_step
757	dtime_frcg = timestep
758	!
759	zcufi=airefi
760	zcvfi=airefi
761	!
762	rlat_rad(1)=xlat*rpi/180.
763	rlon_rad(1)=xlon*rpi/180.
764
765	! iniphysiq will call iniaqua who needs year_len from phys_cal_mod
766	year_len_phys_cal_mod=year_len
767
768	! Ehouarn: iniphysiq requires arrays related to (3D) dynamics grid,
769	! e.g. for cell boundaries, which are meaningless in 1D; so pad these
770	! with '0.' when necessary
771	call iniphysiq(iim,jjm,llm, &
772	1,comm_lmdz, &
773	rday,day_ini,timestep, &
774	(/rlat_rad(1),0./),(/0./), &
775	(/0.,0./),(/rlon_rad(1),0./), &
776	(/ (/airefi,0./),(/0.,0./) /), &
777	(/zcufi,0.,0.,0./), &
778	(/zcvfi,0./), &
779	ra,rg,rd,rcpd,1)
780	print*,'apres iniphysiq'
781
782	! 2 PARAMETRES QUI DEVRAIENT ETRE LUS DANS run.def MAIS NE LE SONT PAS ICI:
783	co2_ppm= 330.0
784	solaire=1370.0
785
786	! Ecriture du startphy avant le premier appel a la physique.
787	! On le met juste avant pour avoir acces a tous les champs
788
789	if (ok_writedem) then
790
791	!--------------------------------------------------------------------------
792	! pbl_surface_init (called here) and pbl_surface_final (called by phyredem)
793	! need : qsol fder snow qsurf evap rugos agesno ftsoil
794	!--------------------------------------------------------------------------
795
796	type_ocean = "force"
797	run_off_lic_0(1) = restart_runoff
798	call fonte_neige_init(run_off_lic_0)
799
800	fder=0.
801	snsrf(1,:)=snowmass ! masse de neige des sous surface
802	print *, 'snsrf', snsrf
803	qsurfsrf(1,:)=qsurf ! humidite de l'air des sous surface
804	fevap=0.
805	z0m(1,:)=rugos ! couverture de neige des sous surface
806	z0h(1,:)=rugosh ! couverture de neige des sous surface
807	agesno = xagesno
808	tsoil(:,:,:)=tsurf
809	!------ AMMA 2e run avec modele sol et rayonnement actif (MPL 23052012)
810	! tsoil(1,1,1)=299.18
811	! tsoil(1,2,1)=300.08
812	! tsoil(1,3,1)=301.88
813	! tsoil(1,4,1)=305.48
814	! tsoil(1,5,1)=308.00
815	! tsoil(1,6,1)=308.00
816	! tsoil(1,7,1)=308.00
817	! tsoil(1,8,1)=308.00
818	! tsoil(1,9,1)=308.00
819	! tsoil(1,10,1)=308.00
820	! tsoil(1,11,1)=308.00
821	!-----------------------------------------------------------------------
822	call pbl_surface_init(fder, snsrf, qsurfsrf, tsoil)
823
824	!------------------ prepare limit conditions for limit.nc -----------------
825	!-- Ocean force
826
827	print*,'avant phyredem'
828	pctsrf(1,:)=0.
829	if (nat_surf.eq.0.) then
830	pctsrf(1,is_oce)=1.
831	pctsrf(1,is_ter)=0.
832	pctsrf(1,is_lic)=0.
833	pctsrf(1,is_sic)=0.
834	else if (nat_surf .eq. 1) then
835	pctsrf(1,is_oce)=0.
836	pctsrf(1,is_ter)=1.
837	pctsrf(1,is_lic)=0.
838	pctsrf(1,is_sic)=0.
839	else if (nat_surf .eq. 2) then
840	pctsrf(1,is_oce)=0.
841	pctsrf(1,is_ter)=0.
842	pctsrf(1,is_lic)=1.
843	pctsrf(1,is_sic)=0.
844	else if (nat_surf .eq. 3) then
845	pctsrf(1,is_oce)=0.
846	pctsrf(1,is_ter)=0.
847	pctsrf(1,is_lic)=0.
848	pctsrf(1,is_sic)=1.
849
850	end if
851
852	print*,'nat_surf,pctsrf(1,is_oce),pctsrf(1,is_ter)',nat_surf &
853	& ,pctsrf(1,is_oce),pctsrf(1,is_ter)
854
855	zmasq=pctsrf(1,is_ter)+pctsrf(1,is_lic)
856	zpic = zpicinp
857	ftsol=tsurf
858	falb_dir=albedo
859	falb_dif=albedo
860	rugoro=rugos
861	t_ancien(1,:)=temp(:)
862	q_ancien(1,:)=q(:,1)
863	ql_ancien = 0.
864	qs_ancien = 0.
865	prlw_ancien = 0.
866	prsw_ancien = 0.
867	prw_ancien = 0.
868	IF ( ok_bs ) THEN
869	qbs_ancien = 0.
870	prbsw_ancien = 0.
871	ENDIF
872	IF ( ok_ice_supersat ) THEN
873	cf_ancien = 0.
874	rvc_ancien = 0.
875	ENDIF
876	!jyg<
877	!! pbl_tke(:,:,:)=1.e-8
878	pbl_tke(:,:,:)=0.
879	pbl_tke(:,2,:)=1.e-2
880	PRINT *, ' pbl_tke dans lmdz1d '
881	if (prt_level .ge. 5) then
882	DO nsrf = 1,4
883	PRINT *,'pbl_tke(1,:,',nsrf,') ',pbl_tke(1,:,nsrf)
884	ENDDO
885	end if
886
887	!>jyg
888
889	rain_fall=0.
890	snow_fall=0.
891	solsw=0.
892	solswfdiff=0.
893	sollw=0.
894	sollwdown=rsigmatsurf*4
895	radsol=0.
896	rnebcon=0.
897	ratqs=0.
898	clwcon=0.
899	zmax0 = 0.
900	zmea=zsurf
901	zstd=0.
902	zsig=0.
903	zgam=0.
904	zval=0.
905	zthe=0.
906	sig1=0.
907	w01=0.
908	!
909	wake_deltaq = 0.
910	wake_deltat = 0.
911	wake_delta_pbl_TKE(:,:,:) = 0.
912	delta_tsurf = 0.
913	wake_fip = 0.
914	wake_pe = 0.
915	wake_s = 0.
916	awake_s = 0.
917	wake_dens = 0.
918	awake_dens = 0.
919	cv_gen = 0.
920	wake_cstar = 0.
921	ale_bl = 0.
922	ale_bl_trig = 0.
923	alp_bl = 0.
924	IF (ALLOCATED(du_gwd_rando)) du_gwd_rando = 0.
925	IF (ALLOCATED(du_gwd_front)) du_gwd_front = 0.
926	entr_therm = 0.
927	detr_therm = 0.
928	f0 = 0.
929	fm_therm = 0.
930	u_ancien(1,:)=u(:)
931	v_ancien(1,:)=v(:)
932
933	u10m=0.
934	v10m=0.
935	ale_wake=0.
936	ale_bl_stat=0.
937
938	!------------------------------------------------------------------------
939	! Make file containing restart for the physics (startphy.nc)
940	!
941	! NB: List of the variables to be written by phyredem (via put_field):
942	! rlon,rlat,zmasq,pctsrf(:,is_ter),pctsrf(:,is_lic),pctsrf(:,is_oce)
943	! pctsrf(:,is_sic),ftsol(:,nsrf),tsoil(:,isoil,nsrf),qsurf(:,nsrf)
944	! qsol,falb_dir(:,nsrf),falb_dif(:,nsrf),evap(:,nsrf),snow(:,nsrf)
945	! radsol,solsw,solswfdiff,sollw, sollwdown,fder,rain_fall,snow_fall,frugs(:,nsrf)
946	! agesno(:,nsrf),zmea,zstd,zsig,zgam,zthe,zpic,zval,rugoro
947	! t_ancien,q_ancien,,frugs(:,is_oce),clwcon(:,1),rnebcon(:,1),ratqs(:,1)
948	! run_off_lic_0,pbl_tke(:,1:klev,nsrf), zmax0,f0,sig1,w01
949	! wake_deltat,wake_deltaq,wake_s,awake_s,wake_dens,awake_dens,cv_gen,wake_cstar,
950	! wake_fip,wake_delta_pbl_tke(:,1:klev,nsrf)
951	!
952	! NB2: The content of the startphy.nc file depends on some flags defined in
953	! the ".def" files. However, since conf_phys is not called in lmdz1d.F90, these flags have
954	! to be set at some arbitratry convenient values.
955	!------------------------------------------------------------------------
956	!Al1 =============== restart option ==========================
957	iflag_physiq=0
958	call getin('iflag_physiq',iflag_physiq)
959
960	if (.not.restart) then
961	iflag_pbl = 5
962	call phyredem ("startphy.nc")
963	else
964	! (desallocations)
965	print*,'callin surf final'
966	call pbl_surface_final( fder, snsrf, qsurfsrf, tsoil)
967	print*,'after surf final'
968	CALL fonte_neige_final(run_off_lic_0)
969	endif
970
971	ok_writedem=.false.
972	print*,'apres phyredem'
973
974	endif ! ok_writedem
975
976	!------------------------------------------------------------------------
977	! Make file containing boundary conditions (limit.nc) Al1->restartdyn*
978	! --------------------------------------------------
979	! NB: List of the variables to be written in limit.nc
980	! (by writelim.F, subroutine of 1DUTILS.h):
981	! phy_nat,phy_alb,phy_sst,phy_bil,phy_rug,phy_ice,
982	! phy_fter,phy_foce,phy_flic,phy_fsic)
983	!------------------------------------------------------------------------
984	do i=1,year_len
985	phy_nat(i) = nat_surf
986	phy_alb(i) = albedo
987	phy_sst(i) = tsurf ! read_tsurf1d will be used instead
988	phy_rug(i) = rugos
989	phy_fter(i) = pctsrf(1,is_ter)
990	phy_foce(i) = pctsrf(1,is_oce)
991	phy_fsic(i) = pctsrf(1,is_sic)
992	phy_flic(i) = pctsrf(1,is_lic)
993	enddo
994
995	! fabrication de limit.nc
996	call writelim (1,phy_nat,phy_alb,phy_sst,phy_bil,phy_rug, &
997	& phy_ice,phy_fter,phy_foce,phy_flic,phy_fsic)
998
999
1000	call phys_state_var_end
1001	!Al1
1002	if (restart) then
1003	print*,'call to restart dyn 1d'
1004	Call dyn1deta0("start1dyn.nc",plev,play,phi,phis,presnivs, &
1005	& u,v,temp,q,omega2)
1006
1007	print*,'fnday,annee_ref,day_ref,day_ini', &
1008	& fnday,annee_ref,day_ref,day_ini
1009	!** call ymds2ju(annee_ref,mois,day_ini,heure,day)
1010	day = day_ini
1011	day_end = day_ini + nday
1012	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
1013
1014	! Print out the actual date of the beginning of the simulation :
1015	call ju2ymds(daytime, an, mois, jour, heure)
1016	print *,' Time of beginning : y m d h',an, mois,jour,heure/3600.
1017
1018	day = int(daytime)
1019	time=daytime-day
1020
1021	print,'*** intialised fields from restart1dyn *****'
1022	print*,'plev,play,phi,phis,presnivs,u,v,temp,q,omega2'
1023	print*,'temp(1),q(1,1),u(1),v(1),plev(1),phis :'
1024	print*,temp(1),q(1,1),u(1),v(1),plev(1),phis
1025	! raz for safety
1026	do l=1,llm
1027	dq_dyn(l,1) = 0.
1028	enddo
1029	endif
1030	!Al1 ================ end restart =================================
1031	IF (ecrit_slab_oc.eq.1) then
1032	open(97,file='div_slab.dat',STATUS='UNKNOWN')
1033	elseif (ecrit_slab_oc.eq.0) then
1034	open(97,file='div_slab.dat',STATUS='OLD')
1035	endif
1036	!
1037	!---------------------------------------------------------------------
1038	! Initialize target profile for RHT nudging if needed
1039	!---------------------------------------------------------------------
1040	if (nudge(inudge_RHT)) then
1041	call nudge_RHT_init(plev,play,temp,q(:,1),t_targ,rh_targ)
1042	endif
1043	if (nudge(inudge_UV)) then
1044	call nudge_UV_init(plev,play,u,v,u_targ,v_targ)
1045	endif
1046	!
1047	!=====================================================================
1048	IF (CPPKEY_OUTPUTPHYSSCM) THEN
1049	CALL iophys_ini(timestep)
1050	END IF
1051	! START OF THE TEMPORAL LOOP :
1052	!=====================================================================
1053
1054	it_end = nint(fnday*day_step)
1055	!test JLD it_end = 10
1056	do while(it.le.it_end)
1057
1058	if (prt_level.ge.1) then
1059	print*,'XXXXXXXXXXXXXXXXXXX ITAP,day,time=', &
1060	& it,day,time,it_end,day_step
1061	print*,'PAS DE TEMPS ',timestep
1062	endif
1063	!Al1 demande de restartphy.nc
1064	if (it.eq.it_end) lastcall=.True.
1065
1066	!---------------------------------------------------------------------
1067	! Geopotential :
1068	!---------------------------------------------------------------------
1069
1070	phi(1)=RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
1071	do l = 1, llm-1
1072	phi(l+1)=phi(l)+RD(temp(l)+temp(l+1)) &
1073	& (play(l)-play(l+1))/(play(l)+play(l+1))
1074	enddo
1075
1076	!---------------------------------------------------------------------
1077	! Interpolation of forcings in time and onto model levels
1078	!---------------------------------------------------------------------
1079
1080	INCLUDE "old_1D_interp_cases.h"
1081
1082	if (forcing_GCM2SCM) then
1083	write (,) 'forcing_GCM2SCM not yet implemented'
1084	stop 'in time loop'
1085	endif ! forcing_GCM2SCM
1086
1087	!!!!---------------------------------------------------------------------
1088	!!!! Geopotential :
1089	!!!!---------------------------------------------------------------------
1090	!!!
1091	!!! phi(1)=RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
1092	!!! do l = 1, llm-1
1093	!!! phi(l+1)=phi(l)+RD(temp(l)+temp(l+1)) &
1094	!!! & (play(l)-play(l+1))/(play(l)+play(l+1))
1095	!!! enddo
1096
1097	!---------------------------------------------------------------------
1098	! Listing output for debug prt_level>=1
1099	!---------------------------------------------------------------------
1100	if (prt_level>=1) then
1101	print *,' avant physiq : -------- day time ',day,time
1102	write(,) 'firstcall,lastcall,phis', &
1103	& firstcall,lastcall,phis
1104	end if
1105	if (prt_level>=5) then
1106	write(*,'(a10,2a4,4a13)') 'BEFOR1 IT=','it','l', &
1107	& 'presniv','plev','play','phi'
1108	write(*,'(a10,2i4,4f13.2)') ('BEFOR1 IT= ',it,l, &
1109	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
1110	write(*,'(a11,2a4,a11,6a8)') 'BEFOR2','it','l', &
1111	& 'presniv','u','v','temp','q1','q2','omega2'
1112	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('BEFOR2 IT= ',it,l, &
1113	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
1114	endif
1115
1116	!---------------------------------------------------------------------
1117	! Call physiq :
1118	!---------------------------------------------------------------------
1119	call physiq(ngrid,llm, &
1120	firstcall,lastcall,timestep, &
1121	plev,play,phi,phis,presnivs, &
1122	u,v, rot, temp,q,omega2, &
1123	du_phys,dv_phys,dt_phys,dq,dpsrf)
1124	firstcall=.false.
1125
1126	!---------------------------------------------------------------------
1127	! Listing output for debug
1128	!---------------------------------------------------------------------
1129	if (prt_level>=5) then
1130	write(*,'(a11,2a4,4a13)') 'AFTER1 IT=','it','l', &
1131	& 'presniv','plev','play','phi'
1132	write(*,'(a11,2i4,4f13.2)') ('AFTER1 it= ',it,l, &
1133	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
1134	write(*,'(a11,2a4,a11,6a8)') 'AFTER2','it','l', &
1135	& 'presniv','u','v','temp','q1','q2','omega2'
1136	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('AFTER2 it= ',it,l, &
1137	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
1138	write(*,'(a11,2a4,a11,5a8)') 'AFTER3','it','l', &
1139	& 'presniv','du_phys','dv_phys','dt_phys','dq1','dq2'
1140	write(*,'(a11,2i4,f11.2,5f8.2)') ('AFTER3 it= ',it,l, &
1141	& presnivs(l),86400du_phys(l),86400dv_phys(l), &
1142	& 86400dt_phys(l),86400dq(l,1),dq(l,2),l=1,llm)
1143	write(,) 'dpsrf',dpsrf
1144	endif
1145	!---------------------------------------------------------------------
1146	! Add physical tendencies :
1147	!---------------------------------------------------------------------
1148
1149	fcoriolis=2.sin(rpixlat/180.)*romega
1150	if (forcing_radconv .or. forcing_fire) then
1151	fcoriolis=0.0
1152	dt_cooling=0.0
1153	d_t_adv=0.0
1154	d_q_adv=0.0
1155	endif
1156	! print*, 'calcul de fcoriolis ', fcoriolis
1157
1158	if (forcing_toga .or. forcing_GCSSold .or. forcing_twpice &
1159	& .or.forcing_amma .or. forcing_type.eq.101) then
1160	fcoriolis=0.0 ; ug=0. ; vg=0.
1161	endif
1162
1163	if(forcing_rico) then
1164	dt_cooling=0.
1165	endif
1166
1167	!CRio:Attention modif sp??cifique cas de Caroline
1168	if (forcing_type==-1) then
1169	fcoriolis=0.
1170	!Nudging
1171
1172	!on calcule dt_cooling
1173	do l=1,llm
1174	if (play(l).ge.20000.) then
1175	dt_cooling(l)=-1.5/86400.
1176	elseif ((play(l).ge.10000.).and.((play(l).lt.20000.))) then
1177	dt_cooling(l)=-1.5/86400.(play(l)-10000.)/(10000.)-1./86400.(20000.-play(l))/10000.*(temp(l)-200.)
1178	else
1179	dt_cooling(l)=-1.*(temp(l)-200.)/86400.
1180	endif
1181	enddo
1182
1183	endif
1184	!RC
1185	if (forcing_sandu) then
1186	ug(1:llm)=u_mod(1:llm)
1187	vg(1:llm)=v_mod(1:llm)
1188	endif
1189
1190	IF (prt_level >= 5) print*, 'fcoriolis, xlat,mxcalc ', &
1191	fcoriolis, xlat,mxcalc
1192
1193	! print *,'u-ug=',u-ug
1194
1195	!!!!!!!!!!!!!!!!!!!!!!!!
1196	! Geostrophic wind
1197	! Le calcul ci dessous est insuffisamment precis
1198	! du_age(1:mxcalc)=fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
1199	! dv_age(1:mxcalc)=-fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
1200	!!!!!!!!!!!!!!!!!!!!!!!!
1201	sfdt = sin(0.5fcoriolistimestep)
1202	cfdt = cos(0.5fcoriolistimestep)
1203	! print *,'fcoriolis,sfdt,cfdt,timestep',fcoriolis,sfdt,cfdt,timestep
1204	!
1205	du_age(1:mxcalc)= -2.sfdt/timestep &
1206	& (sfdt*(u(1:mxcalc)-ug(1:mxcalc)) - &
1207	& cfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
1208	!! : fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
1209	!
1210	dv_age(1:mxcalc)= -2.sfdt/timestep &
1211	& (cfdt*(u(1:mxcalc)-ug(1:mxcalc)) + &
1212	& sfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
1213	!! : -fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
1214	!
1215	!!!!!!!!!!!!!!!!!!!!!!!!
1216	! Nudging
1217	!!!!!!!!!!!!!!!!!!!!!!!!
1218	d_t_nudge(:) = 0.
1219	d_q_nudge(:,:) = 0.
1220	d_u_nudge(:) = 0.
1221	d_v_nudge(:) = 0.
1222	if (nudge(inudge_RHT)) then
1223	call nudge_RHT(timestep,plev,play,t_targ,rh_targ,temp,q(:,1), &
1224	& d_t_nudge,d_q_nudge(:,1))
1225	endif
1226	if (nudge(inudge_UV)) then
1227	call nudge_UV(timestep,plev,play,u_targ,v_targ,u,v, &
1228	& d_u_nudge,d_v_nudge)
1229	endif
1230	!
1231	if (forcing_fire) THEN
1232
1233	!let ww=if ( alt le 1100 ) then alt*-0.00001 else 0
1234	!let wt=if ( alt le 1100 ) then min( -3.75e-5 , -7.5e-8*alt) else 0
1235	!let wq=if ( alt le 1100 ) then max( 1.5e-8 , 3e-11*alt) else 0
1236	d_t_adv=0.
1237	d_q_adv=0.
1238	teta=temp(pzero/play)*rkappa
1239	d_t_adv=0.
1240	d_q_adv=0.
1241	do l=2,llm-1
1242	if (zlay(l)<=1100) then
1243	wwww=-0.00001*zlay(l)
1244	d_t_adv(l)=-wwww(teta(l)-teta(l+1))/(zlay(l)-zlay(l+1)) /(pzero/play(l))*rkappa
1245	d_q_adv(l,1:2)=-wwww*(q(l,1:2)-q(l+1,1:2))/(zlay(l)-zlay(l+1))
1246	d_t_adv(l)=d_t_adv(l)+min(-3.75e-5 , -7.5e-8*zlay(l))
1247	d_q_adv(l,1)=d_q_adv(l,1)+max( 1.5e-8 , 3e-11*zlay(l))
1248	endif
1249	enddo
1250
1251	endif
1252
1253	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1254	! call writefield_phy('dv_age' ,dv_age,llm)
1255	! call writefield_phy('du_age' ,du_age,llm)
1256	! call writefield_phy('du_phys' ,du_phys,llm)
1257	! call writefield_phy('u_tend' ,u,llm)
1258	! call writefield_phy('u_g' ,ug,llm)
1259	!
1260	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1261	!! Increment state variables
1262	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1263	IF (flag_inhib_forcing == 0) then ! if tendency of forcings should be added
1264
1265	! pour les cas sandu et astex, on reclacule u,v,q,temp et teta dans 1D_nudge_sandu_astex.h
1266	! au dessus de 700hpa, on relaxe vers les profils initiaux
1267	if (forcing_sandu .OR. forcing_astex) then
1268	INCLUDE "1D_nudge_sandu_astex.h"
1269	else
1270	u(1:mxcalc)=u(1:mxcalc) + timestep*( &
1271	& du_phys(1:mxcalc) &
1272	& +du_age(1:mxcalc)+du_adv(1:mxcalc) &
1273	& +d_u_nudge(1:mxcalc) )
1274	v(1:mxcalc)=v(1:mxcalc) + timestep*( &
1275	& dv_phys(1:mxcalc) &
1276	& +dv_age(1:mxcalc)+dv_adv(1:mxcalc) &
1277	& +d_v_nudge(1:mxcalc) )
1278	q(1:mxcalc,:)=q(1:mxcalc,:)+timestep*( &
1279	& dq(1:mxcalc,:) &
1280	& +d_q_adv(1:mxcalc,:) &
1281	& +d_q_nudge(1:mxcalc,:) )
1282
1283	if (prt_level.ge.3) then
1284	print *, &
1285	& 'physiq-> temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1) ', &
1286	& temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1)
1287	print* ,'dv_phys=',dv_phys
1288	print* ,'dv_age=',dv_age
1289	print* ,'dv_adv=',dv_adv
1290	print* ,'d_v_nudge=',d_v_nudge
1291	print*, v
1292	print*, vg
1293	endif
1294
1295	temp(1:mxcalc)=temp(1:mxcalc)+timestep*( &
1296	& dt_phys(1:mxcalc) &
1297	& +d_t_adv(1:mxcalc) &
1298	& +d_t_nudge(1:mxcalc) &
1299	& +dt_cooling(1:mxcalc)) ! Taux de chauffage ou refroid.
1300
1301	IF (CPPKEY_OUTPUTPHYSSCM) THEN
1302	CALL iophys_ecrit('d_t_adv',klev,'d_t_adv','m/s',d_t_adv)
1303	CALL iophys_ecrit('d_t_nudge',klev,'d_t_nudge','m/s',d_t_nudge)
1304	END IF
1305
1306	endif ! forcing_sandu or forcing_astex
1307
1308	teta=temp(pzero/play)*rkappa
1309	!
1310	!---------------------------------------------------------------------
1311	! Nudge soil temperature if requested
1312	!---------------------------------------------------------------------
1313
1314	IF (nudge_tsoil .AND. .NOT. lastcall) THEN
1315	ftsoil(1,isoil_nudge,:) = ftsoil(1,isoil_nudge,:) &
1316	& -timestep/tau_soil_nudge*(ftsoil(1,isoil_nudge,:)-Tsoil_nudge)
1317	ENDIF
1318
1319	!---------------------------------------------------------------------
1320	! Add large-scale tendencies (advection, etc) :
1321	!---------------------------------------------------------------------
1322
1323	!cc nrlmd
1324	!cc tmpvar=teta
1325	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1326	!cc
1327	!cc teta(1:mxcalc)=tmpvar(1:mxcalc)
1328	!cc tmpvar(:)=q(:,1)
1329	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1330	!cc q(1:mxcalc,1)=tmpvar(1:mxcalc)
1331	!cc tmpvar(:)=q(:,2)
1332	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1333	!cc q(1:mxcalc,2)=tmpvar(1:mxcalc)
1334
1335	END IF ! end if tendency of tendency should be added
1336
1337	!---------------------------------------------------------------------
1338	! Air temperature :
1339	!---------------------------------------------------------------------
1340	if (lastcall) then
1341	print*,'Pas de temps final ',it
1342	call ju2ymds(daytime, an, mois, jour, heure)
1343	print*,'a la date : a m j h',an, mois, jour ,heure/3600.
1344	endif
1345
1346	! incremente day time
1347	! print*,'daytime bef',daytime,1./day_step
1348	daytime = daytime+1./day_step
1349	!Al1dbg
1350	day = int(daytime+0.1/day_step)
1351	! time = max(daytime-day,0.0)
1352	!Al1&jyg: correction de bug
1353	!cc time = real(mod(it,day_step))/day_step
1354	time = time_ini/24.+real(mod(it,day_step))/day_step
1355	! print*,'daytime nxt time',daytime,time
1356	it=it+1
1357
1358	enddo
1359
1360	!Al1
1361	if (ecrit_slab_oc.ne.-1) close(97)
1362
1363	!Al1 Call to 1D equivalent of dynredem (an,mois,jour,heure ?)
1364	! -------------------------------------
1365	call dyn1dredem("restart1dyn.nc", &
1366	& plev,play,phi,phis,presnivs, &
1367	& u,v,temp,q,omega2)
1368
1369	CALL abort_gcm ('lmdz1d ','The End ',0)
1370
1371	END SUBROUTINE old_lmdz1d
1372
1373	INCLUDE "old_1DUTILS_read_interp.h"

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format