Context Navigation

old_lmdz1d.f90 @ 5308

Last change on this file since 5308 was 5302, checked in by abarral, 37 hours ago
Turn compar1d.h date_cas.h into module Move fcg_racmo.h to obsolete
File size: 51.3 KB

Line
1	!
2	! $Id: lmdz1d.F90 3540 2019-06-25 14:50:13Z fairhead $
3	!
4
5	SUBROUTINE old_lmdz1d
6
7	USE flux_arp_mod_h
8	USE compbl_mod_h
9	USE clesphys_mod_h
10	USE ioipsl, only: ju2ymds, ymds2ju, ioconf_calendar,getin
11	USE phys_state_var_mod, ONLY : phys_state_var_init, phys_state_var_end, &
12	clwcon, detr_therm, &
13	qsol, fevap, z0m, z0h, agesno, &
14	du_gwd_rando, du_gwd_front, entr_therm, f0, fm_therm, &
15	falb_dir, falb_dif, &
16	ftsol, beta_aridity, pbl_tke, pctsrf, radsol, rain_fall, snow_fall, ratqs, &
17	rnebcon, rugoro, sig1, w01, solaire_etat0, sollw, sollwdown, &
18	solsw, solswfdiff, t_ancien, q_ancien, u_ancien, v_ancien, &
19	wake_delta_pbl_TKE, delta_tsurf, wake_fip, wake_pe, &
20	wake_deltaq, wake_deltat, wake_s, awake_s, wake_dens, &
21	awake_dens, cv_gen, wake_cstar, &
22	zgam, zmax0, zmea, zpic, zsig, &
23	zstd, zthe, zval, ale_bl, ale_bl_trig, alp_bl, &
24	ql_ancien, qs_ancien, qbs_ancien, cf_ancien, rvc_ancien, &
25	prlw_ancien, prsw_ancien, prbsw_ancien, prw_ancien, &
26	u10m,v10m,ale_wake,ale_bl_stat
27
28
29	USE dimphy
30	USE surface_data, only : type_ocean,ok_veget
31	USE pbl_surface_mod, only : ftsoil, pbl_surface_init, &
32	pbl_surface_final
33	USE fonte_neige_mod, only : fonte_neige_init, fonte_neige_final
34
35	USE infotrac ! new
36	USE control_mod
37	USE indice_sol_mod
38	USE phyaqua_mod
39	! USE mod_1D_cases_read
40	USE mod_1D_cases_read2
41	USE mod_1D_amma_read
42	USE print_control_mod, ONLY: lunout, prt_level
43	USE iniphysiq_mod, ONLY: iniphysiq
44	USE mod_const_mpi, ONLY: comm_lmdz
45	USE physiq_mod, ONLY: physiq
46	USE comvert_mod, ONLY: presnivs, ap, bp, dpres,nivsig, nivsigs, pa, &
47	preff, aps, bps, pseudoalt, scaleheight
48	USE temps_mod, ONLY: annee_ref, calend, day_end, day_ini, day_ref, &
49	itau_dyn, itau_phy, start_time, year_len
50	USE phys_cal_mod, ONLY : year_len_phys_cal_mod => year_len
51	USE lmdz_cppkeys_wrapper, ONLY: CPPKEY_OUTPUTPHYSSCM
52
53	USE dimensions_mod, ONLY: iim, jjm, llm, ndm
54	USE dimsoil_mod_h, ONLY: nsoilmx
55	USE yomcst_mod_h
56	USE tsoilnudge_mod_h
57	USE fcg_gcssold_mod_h
58	USE compar1d_mod_h
59	USE date_cas_mod_h
60	implicit none
61
62	!!! INCLUDE "fbforcing.h"
63
64	!=====================================================================
65	! DECLARATIONS
66	!=====================================================================
67
68	!---------------------------------------------------------------------
69	! Externals
70	!---------------------------------------------------------------------
71	external fq_sat
72	real fq_sat
73
74	!---------------------------------------------------------------------
75	! Arguments d' initialisations de la physique (USER DEFINE)
76	!---------------------------------------------------------------------
77
78	integer, parameter :: ngrid=1
79	real :: zcufi = 1.
80	real :: zcvfi = 1.
81
82	!- real :: nat_surf
83	!- logical :: ok_flux_surf
84	!- real :: fsens
85	!- real :: flat
86	!- real :: tsurf
87	!- real :: rugos
88	!- real :: qsol(1:2)
89	!- real :: qsurf
90	!- real :: psurf
91	!- real :: zsurf
92	!- real :: albedo
93	!-
94	!- real :: time = 0.
95	!- real :: time_ini
96	!- real :: xlat
97	!- real :: xlon
98	!- real :: wtsurf
99	!- real :: wqsurf
100	!- real :: restart_runoff
101	!- real :: xagesno
102	!- real :: qsolinp
103	!- real :: zpicinp
104	!-
105	real :: fnday
106	real :: day, daytime
107	real :: day1
108	real :: heure
109	integer :: jour
110	integer :: mois
111	integer :: an
112
113	!---------------------------------------------------------------------
114	! Declarations related to forcing and initial profiles
115	!---------------------------------------------------------------------
116
117	integer :: kmax = llm
118	integer llm700,nq1,nq2
119	INTEGER, PARAMETER :: nlev_max=1000, nqmx=1000
120	real timestep, frac
121	real height(nlev_max),tttprof(nlev_max),qtprof(nlev_max)
122	real uprof(nlev_max),vprof(nlev_max),e12prof(nlev_max)
123	real ugprof(nlev_max),vgprof(nlev_max),wfls(nlev_max)
124	real dqtdxls(nlev_max),dqtdyls(nlev_max)
125	real dqtdtls(nlev_max),thlpcar(nlev_max)
126	real qprof(nlev_max,nqmx)
127
128	! integer :: forcing_type
129	logical :: forcing_les = .false.
130	logical :: forcing_armcu = .false.
131	logical :: forcing_rico = .false.
132	logical :: forcing_radconv = .false.
133	logical :: forcing_toga = .false.
134	logical :: forcing_twpice = .false.
135	logical :: forcing_amma = .false.
136	logical :: forcing_dice = .false.
137	logical :: forcing_gabls4 = .false.
138
139	logical :: forcing_GCM2SCM = .false.
140	logical :: forcing_GCSSold = .false.
141	logical :: forcing_sandu = .false.
142	logical :: forcing_astex = .false.
143	logical :: forcing_fire = .false.
144	logical :: forcing_case = .false.
145	logical :: forcing_case2 = .false.
146	logical :: forcing_SCM = .false.
147	integer :: type_ts_forcing ! 0 = SST constant; 1 = SST read from a file
148	! (cf read_tsurf1d.F)
149
150	real wwww
151	!vertical advection computation
152	! real d_t_z(llm), d_q_z(llm)
153	! real d_t_dyn_z(llm), dq_dyn_z(llm)
154	! real zz(llm)
155	! real zfact
156
157	!flag forcings
158	logical :: nudge_wind=.true.
159	logical :: nudge_thermo=.false.
160	logical :: cptadvw=.true.
161	!=====================================================================
162	! DECLARATIONS FOR EACH CASE
163	!=====================================================================
164	!
165	INCLUDE "old_1D_decl_cases.h"
166	!
167	!---------------------------------------------------------------------
168	! Declarations related to nudging
169	!---------------------------------------------------------------------
170	integer :: nudge_max
171	parameter (nudge_max=9)
172	integer :: inudge_RHT=1
173	integer :: inudge_UV=2
174	logical :: nudge(nudge_max)
175	real :: t_targ(llm)
176	real :: rh_targ(llm)
177	real :: u_targ(llm)
178	real :: v_targ(llm)
179	!
180	!---------------------------------------------------------------------
181	! Declarations related to vertical discretization:
182	!---------------------------------------------------------------------
183	real :: pzero=1.e5
184	real :: play (llm),zlay (llm),sig_s(llm),plev(llm+1)
185	real :: playd(llm),zlayd(llm),ap_amma(llm+1),bp_amma(llm+1)
186
187	!---------------------------------------------------------------------
188	! Declarations related to variables
189	!---------------------------------------------------------------------
190
191	real :: phi(llm)
192	real :: teta(llm),tetal(llm),temp(llm),u(llm),v(llm),w(llm)
193	REAL rot(1, llm) ! relative vorticity, in s-1
194	real :: rlat_rad(1),rlon_rad(1)
195	real :: omega(llm+1),omega2(llm),rho(llm+1)
196	real :: ug(llm),vg(llm),fcoriolis
197	real :: sfdt, cfdt
198	real :: du_phys(llm),dv_phys(llm),dt_phys(llm)
199	real :: dt_dyn(llm)
200	real :: dt_cooling(llm),d_t_adv(llm),d_t_nudge(llm)
201	real :: d_u_nudge(llm),d_v_nudge(llm)
202	real :: du_adv(llm),dv_adv(llm)
203	real :: du_age(llm),dv_age(llm)
204	real :: alpha
205	real :: ttt
206
207	REAL, ALLOCATABLE, DIMENSION(:,:):: q
208	REAL, ALLOCATABLE, DIMENSION(:,:):: dq
209	REAL, ALLOCATABLE, DIMENSION(:,:):: dq_dyn
210	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_adv
211	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_nudge
212	! REAL, ALLOCATABLE, DIMENSION(:):: d_th_adv
213
214	!---------------------------------------------------------------------
215	! Initialization of surface variables
216	!---------------------------------------------------------------------
217	real :: run_off_lic_0(1)
218	real :: fder(1),snsrf(1,nbsrf),qsurfsrf(1,nbsrf)
219	real :: tsoil(1,nsoilmx,nbsrf)
220	! real :: agesno(1,nbsrf)
221
222	!---------------------------------------------------------------------
223	! Call to phyredem
224	!---------------------------------------------------------------------
225	logical :: ok_writedem =.true.
226	real :: sollw_in = 0.
227	real :: solsw_in = 0.
228
229	!---------------------------------------------------------------------
230	! Call to physiq
231	!---------------------------------------------------------------------
232	logical :: firstcall=.true.
233	logical :: lastcall=.false.
234	real :: phis(1) = 0.0
235	real :: dpsrf(1)
236
237	!---------------------------------------------------------------------
238	! Initializations of boundary conditions
239	!---------------------------------------------------------------------
240	real, allocatable :: phy_nat (:) ! 0=ocean libre,1=land,2=glacier,3=banquise
241	real, allocatable :: phy_alb (:) ! Albedo land only (old value condsurf_jyg=0.3)
242	real, allocatable :: phy_sst (:) ! SST (will not be used; cf read_tsurf1d.F)
243	real, allocatable :: phy_bil (:) ! Ne sert que pour les slab_ocean
244	real, allocatable :: phy_rug (:) ! Longueur rugosite utilisee sur land only
245	real, allocatable :: phy_ice (:) ! Fraction de glace
246	real, allocatable :: phy_fter(:) ! Fraction de terre
247	real, allocatable :: phy_foce(:) ! Fraction de ocean
248	real, allocatable :: phy_fsic(:) ! Fraction de glace
249	real, allocatable :: phy_flic(:) ! Fraction de glace
250
251	!---------------------------------------------------------------------
252	! Fichiers et d'autres variables
253	!---------------------------------------------------------------------
254	integer :: k,l,i,it=1,mxcalc
255	integer :: nsrf
256	integer jcode
257	INTEGER read_climoz
258	!
259	integer :: it_end ! iteration number of the last call
260	!Al1
261	integer ecrit_slab_oc !1=ecrit,-1=lit,0=no file
262	data ecrit_slab_oc/-1/
263	!
264	! if flag_inhib_forcing = 0, tendencies of forcing are added
265	! <> 0, tendencies of forcing are not added
266	INTEGER :: flag_inhib_forcing = 0
267
268	!=====================================================================
269	! INITIALIZATIONS
270	!=====================================================================
271	du_phys(:)=0.
272	dv_phys(:)=0.
273	dt_phys(:)=0.
274	dt_dyn(:)=0.
275	dt_cooling(:)=0.
276	d_t_adv(:)=0.
277	d_t_nudge(:)=0.
278	d_u_nudge(:)=0.
279	d_v_nudge(:)=0.
280	du_adv(:)=0.
281	dv_adv(:)=0.
282	du_age(:)=0.
283	dv_age(:)=0.
284
285	! Initialization of Common turb_forcing
286	dtime_frcg = 0.
287	Turb_fcg_gcssold=.false.
288	hthturb_gcssold = 0.
289	hqturb_gcssold = 0.
290
291
292
293
294	!---------------------------------------------------------------------
295	! OPTIONS OF THE 1D SIMULATION (lmdz1d.def => unicol.def)
296	!---------------------------------------------------------------------
297	!Al1
298	call conf_unicol
299	!Al1 moves this gcssold var from common fcg_gcssold to
300	Turb_fcg_gcssold = xTurb_fcg_gcssold
301	! --------------------------------------------------------------------
302	close(1)
303	!Al1
304	write(,) 'lmdz1d.def lu => unicol.def'
305
306	! forcing_type defines the way the SCM is forced:
307	!forcing_type = 0 ==> forcing_les = .true.
308	! initial profiles from file prof.inp.001
309	! no forcing by LS convergence ;
310	! surface temperature imposed ;
311	! radiative cooling may be imposed (iflag_radia=0 in physiq.def)
312	!forcing_type = 1 ==> forcing_radconv = .true.
313	! idem forcing_type = 0, but the imposed radiative cooling
314	! is set to 0 (hence, if iflag_radia=0 in physiq.def,
315	! then there is no radiative cooling at all)
316	!forcing_type = 2 ==> forcing_toga = .true.
317	! initial profiles from TOGA-COARE IFA files
318	! LS convergence and SST imposed from TOGA-COARE IFA files
319	!forcing_type = 3 ==> forcing_GCM2SCM = .true.
320	! initial profiles from the GCM output
321	! LS convergence imposed from the GCM output
322	!forcing_type = 4 ==> forcing_twpice = .true.
323	! initial profiles from TWP-ICE cdf file
324	! LS convergence, omega and SST imposed from TWP-ICE files
325	!forcing_type = 5 ==> forcing_rico = .true.
326	! initial profiles from RICO files
327	! LS convergence imposed from RICO files
328	!forcing_type = 6 ==> forcing_amma = .true.
329	! initial profiles from AMMA nc file
330	! LS convergence, omega and surface fluxes imposed from AMMA file
331	!forcing_type = 7 ==> forcing_dice = .true.
332	! initial profiles and large scale forcings in dice_driver.nc
333	! Different stages: soil model alone, atm. model alone
334	! then both models coupled
335	!forcing_type = 8 ==> forcing_gabls4 = .true.
336	! initial profiles and large scale forcings in gabls4_driver.nc
337	!forcing_type >= 100 ==> forcing_case = .true.
338	! initial profiles and large scale forcings in cas.nc
339	! LS convergence, omega and SST imposed from CINDY-DYNAMO files
340	! 101=cindynamo
341	! 102=bomex
342	!forcing_type >= 100 ==> forcing_case2 = .true.
343	! temporary flag while all the 1D cases are not whith the same cas.nc forcing file
344	! 103=arm_cu2 ie arm_cu with new forcing format
345	! 104=rico2 ie rico with new forcing format
346	!forcing_type = 40 ==> forcing_GCSSold = .true.
347	! initial profile from GCSS file
348	! LS convergence imposed from GCSS file
349	!forcing_type = 50 ==> forcing_fire = .true.
350	! forcing from fire.nc
351	!forcing_type = 59 ==> forcing_sandu = .true.
352	! initial profiles from sanduref file: see prof.inp.001
353	! SST varying with time and divergence constante: see ifa_sanduref.txt file
354	! Radiation has to be computed interactively
355	!forcing_type = 60 ==> forcing_astex = .true.
356	! initial profiles from file: see prof.inp.001
357	! SST,divergence,ug,vg,ufa,vfa varying with time : see ifa_astex.txt file
358	! Radiation has to be computed interactively
359	!forcing_type = 61 ==> forcing_armcu = .true.
360	! initial profiles from file: see prof.inp.001
361	! sensible and latent heat flux imposed: see ifa_arm_cu_1.txt
362	! large scale advective forcing & radiative tendencies applied below 1000m: see ifa_arm_cu_2.txt
363	! use geostrophic wind ug=10m/s vg=0m/s. Duration of the case 53100s
364	! Radiation to be switched off
365	!
366	if (forcing_type <=0) THEN
367	forcing_les = .true.
368	elseif (forcing_type .eq.1) THEN
369	forcing_radconv = .true.
370	elseif (forcing_type .eq.2) THEN
371	forcing_toga = .true.
372	elseif (forcing_type .eq.3) THEN
373	forcing_GCM2SCM = .true.
374	elseif (forcing_type .eq.4) THEN
375	forcing_twpice = .true.
376	elseif (forcing_type .eq.5) THEN
377	forcing_rico = .true.
378	elseif (forcing_type .eq.6) THEN
379	forcing_amma = .true.
380	elseif (forcing_type .eq.7) THEN
381	forcing_dice = .true.
382	elseif (forcing_type .eq.8) THEN
383	forcing_gabls4 = .true.
384	elseif (forcing_type .eq.101) THEN ! Cindynamo starts 1-10-2011 0h
385	forcing_case = .true.
386	year_ini_cas=2011
387	mth_ini_cas=10
388	day_deb=1
389	heure_ini_cas=0.
390	pdt_cas=3*3600. ! forcing frequency
391	elseif (forcing_type .eq.102) THEN ! Bomex starts 24-6-1969 0h
392	forcing_case = .true.
393	year_ini_cas=1969
394	mth_ini_cas=6
395	day_deb=24
396	heure_ini_cas=0.
397	pdt_cas=1800. ! forcing frequency
398	elseif (forcing_type .eq.103) THEN ! Arm_cu starts 21-6-1997 11h30
399	forcing_case2 = .true.
400	year_ini_cas=1997
401	mth_ini_cas=6
402	day_deb=21
403	heure_ini_cas=11.5
404	pdt_cas=1800. ! forcing frequency
405	elseif (forcing_type .eq.104) THEN ! rico starts 16-12-2004 0h
406	forcing_case2 = .true.
407	year_ini_cas=2004
408	mth_ini_cas=12
409	day_deb=16
410	heure_ini_cas=0.
411	pdt_cas=1800. ! forcing frequency
412	elseif (forcing_type .eq.105) THEN ! bomex starts 16-12-2004 0h
413	forcing_case2 = .true.
414	year_ini_cas=1969
415	mth_ini_cas=6
416	day_deb=24
417	heure_ini_cas=0.
418	pdt_cas=1800. ! forcing frequency
419	elseif (forcing_type .eq.106) THEN ! ayotte_24SC starts 6-11-1992 0h
420	forcing_case2 = .true.
421	year_ini_cas=1992
422	mth_ini_cas=11
423	day_deb=6
424	heure_ini_cas=10.
425	pdt_cas=86400. ! forcing frequency
426	elseif (forcing_type .eq.113) THEN ! Arm_cu starts 21-6-1997 11h30
427	forcing_SCM = .true.
428	year_ini_cas=1997
429	! It is possible that those parameters are run twice.
430	call getin('anneeref',year_ini_cas)
431	call getin('dayref',day_deb)
432	mth_ini_cas=1 ! pour le moment on compte depuis le debut de l'annee
433	call getin('time_ini',heure_ini_cas)
434	elseif (forcing_type .eq.40) THEN
435	forcing_GCSSold = .true.
436	elseif (forcing_type .eq.50) THEN
437	forcing_fire = .true.
438	elseif (forcing_type .eq.59) THEN
439	forcing_sandu = .true.
440	elseif (forcing_type .eq.60) THEN
441	forcing_astex = .true.
442	elseif (forcing_type .eq.61) THEN
443	forcing_armcu = .true.
444	IF(llm.NE.19.AND.llm.NE.40) stop 'Erreur nombre de niveaux !!'
445	else
446	write (,) 'ERROR : unknown forcing_type ', forcing_type
447	stop 'Forcing_type should be 0,1,2,3,4,5,6 or 40,59,60,61'
448	ENDIF
449	print*,"forcing type=",forcing_type
450
451	! if type_ts_forcing=0, the surface temp of 1D simulation is constant in time
452	! (specified by tsurf in lmdz1d.def); if type_ts_forcing=1, the surface temperature
453	! varies in time according to a forcing (e.g. forcing_toga) and is passed to read_tsurf1d.F
454	! through the common sst_forcing.
455
456	type_ts_forcing = 0
457	if (forcing_toga.or.forcing_sandu.or.forcing_astex .or. forcing_dice) &
458	& type_ts_forcing = 1
459	!
460	! Initialization of the logical switch for nudging
461	jcode = iflag_nudge
462	do i = 1,nudge_max
463	nudge(i) = mod(jcode,10) .ge. 1
464	jcode = jcode/10
465	enddo
466	!---------------------------------------------------------------------
467	! Definition of the run
468	!---------------------------------------------------------------------
469
470	call conf_gcm( 99, .TRUE. )
471
472	!-----------------------------------------------------------------------
473	allocate( phy_nat (year_len)) ! 0=ocean libre,1=land,2=glacier,3=banquise
474	phy_nat(:)=0.0
475	allocate( phy_alb (year_len)) ! Albedo land only (old value condsurf_jyg=0.3)
476	allocate( phy_sst (year_len)) ! SST (will not be used; cf read_tsurf1d.F)
477	allocate( phy_bil (year_len)) ! Ne sert que pour les slab_ocean
478	phy_bil(:)=1.0
479	allocate( phy_rug (year_len)) ! Longueur rugosite utilisee sur land only
480	allocate( phy_ice (year_len)) ! Fraction de glace
481	phy_ice(:)=0.0
482	allocate( phy_fter(year_len)) ! Fraction de terre
483	phy_fter(:)=0.0
484	allocate( phy_foce(year_len)) ! Fraction de ocean
485	phy_foce(:)=0.0
486	allocate( phy_fsic(year_len)) ! Fraction de glace
487	phy_fsic(:)=0.0
488	allocate( phy_flic(year_len)) ! Fraction de glace
489	phy_flic(:)=0.0
490	!-----------------------------------------------------------------------
491	! Choix du calendrier
492	! -------------------
493
494	! calend = 'earth_365d'
495	if (calend == 'earth_360d') then
496	call ioconf_calendar('360_day')
497	write(,)'CALENDRIER CHOISI: Terrestre a 360 jours/an'
498	else if (calend == 'earth_365d') then
499	call ioconf_calendar('noleap')
500	write(,)'CALENDRIER CHOISI: Terrestre a 365 jours/an'
501	else if (calend == 'earth_366d') then
502	call ioconf_calendar('all_leap')
503	write(,)'CALENDRIER CHOISI: Terrestre bissextile'
504	else if (calend == 'gregorian') then
505	stop 'gregorian calend should not be used by normal user'
506	call ioconf_calendar('gregorian') ! not to be used by normal users
507	write(,)'CALENDRIER CHOISI: Gregorien'
508	else
509	write (,) 'ERROR : unknown calendar ', calend
510	stop 'calend should be 360d,earth_365d,earth_366d,gregorian'
511	endif
512	!-----------------------------------------------------------------------
513	!
514	!c Date :
515	! La date est supposee donnee sous la forme [annee, numero du jour dans
516	! l annee] ; l heure est donnee dans time_ini, lu dans lmdz1d.def.
517	! On appelle ymds2ju pour convertir [annee, jour] en [jour Julien].
518	! Le numero du jour est dans "day". L heure est traitee separement.
519	! La date complete est dans "daytime" (l'unite est le jour).
520	if (nday>0) then
521	fnday=nday
522	else
523	fnday=-nday/float(day_step)
524	endif
525	print *,'fnday=',fnday
526	! start_time doit etre en FRACTION DE JOUR
527	start_time=time_ini/24.
528
529	! Special case for arm_cu which lasts less than one day : 53100s !! (MPL 20111026)
530	IF(forcing_type .EQ. 61) fnday=53100./86400.
531	IF(forcing_type .EQ. 103) fnday=53100./86400.
532	! Special case for amma which lasts less than one day : 64800s !! (MPL 20120216)
533	IF(forcing_type .EQ. 6) fnday=64800./86400.
534	! IF(forcing_type .EQ. 6) fnday=50400./86400.
535	IF(forcing_type .EQ. 8 ) fnday=129600./86400.
536	annee_ref = anneeref
537	mois = 1
538	day_ref = dayref
539	heure = 0.
540	itau_dyn = 0
541	itau_phy = 0
542	call ymds2ju(annee_ref,mois,day_ref,heure,day)
543	day_ini = int(day)
544	day_end = day_ini + int(fnday)
545
546	IF (forcing_type .eq.2) THEN
547	! Convert the initial date of Toga-Coare to Julian day
548	call ymds2ju &
549	& (year_ini_toga,mth_ini_toga,day_ini_toga,heure,day_ju_ini_toga)
550
551	ELSEIF (forcing_type .eq.4) THEN
552	! Convert the initial date of TWPICE to Julian day
553	call ymds2ju &
554	& (year_ini_twpi,mth_ini_twpi,day_ini_twpi,heure_ini_twpi &
555	& ,day_ju_ini_twpi)
556	ELSEIF (forcing_type .eq.6) THEN
557	! Convert the initial date of AMMA to Julian day
558	call ymds2ju &
559	& (year_ini_amma,mth_ini_amma,day_ini_amma,heure_ini_amma &
560	& ,day_ju_ini_amma)
561	ELSEIF (forcing_type .eq.7) THEN
562	! Convert the initial date of DICE to Julian day
563	call ymds2ju &
564	& (year_ini_dice,mth_ini_dice,day_ini_dice,heure_ini_dice &
565	& ,day_ju_ini_dice)
566	ELSEIF (forcing_type .eq.8 ) THEN
567	! Convert the initial date of GABLS4 to Julian day
568	call ymds2ju &
569	& (year_ini_gabls4,mth_ini_gabls4,day_ini_gabls4,heure_ini_gabls4 &
570	& ,day_ju_ini_gabls4)
571	ELSEIF (forcing_type .gt.100) THEN
572	! Convert the initial date to Julian day
573	day_ini_cas=day_deb
574	print*,'time case',year_ini_cas,mth_ini_cas,day_ini_cas
575	call ymds2ju &
576	& (year_ini_cas,mth_ini_cas,day_ini_cas,heure_ini_cas*3600 &
577	& ,day_ju_ini_cas)
578	print*,'time case 2',day_ini_cas,day_ju_ini_cas
579	ELSEIF (forcing_type .eq.59) THEN
580	! Convert the initial date of Sandu case to Julian day
581	call ymds2ju &
582	& (year_ini_sandu,mth_ini_sandu,day_ini_sandu, &
583	& time_ini*3600.,day_ju_ini_sandu)
584
585	ELSEIF (forcing_type .eq.60) THEN
586	! Convert the initial date of Astex case to Julian day
587	call ymds2ju &
588	& (year_ini_astex,mth_ini_astex,day_ini_astex, &
589	& time_ini*3600.,day_ju_ini_astex)
590
591	ELSEIF (forcing_type .eq.61) THEN
592	! Convert the initial date of Arm_cu case to Julian day
593	call ymds2ju &
594	& (year_ini_armcu,mth_ini_armcu,day_ini_armcu,heure_ini_armcu &
595	& ,day_ju_ini_armcu)
596	ENDIF
597
598	IF (forcing_type .gt.100) THEN
599	daytime = day + heure_ini_cas/24. ! 1st day and initial time of the simulation
600	ELSE
601	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
602	ENDIF
603	! Print out the actual date of the beginning of the simulation :
604	call ju2ymds(daytime,year_print, month_print,day_print,sec_print)
605	print *,' Time of beginning : ', &
606	& year_print, month_print, day_print, sec_print
607
608	!---------------------------------------------------------------------
609	! Initialization of dimensions, geometry and initial state
610	!---------------------------------------------------------------------
611	! call init_phys_lmdz(1,1,llm,1,(/1/)) ! job now done via iniphysiq
612	! but we still need to initialize dimphy module (klon,klev,etc.) here.
613	call init_dimphy1D(1,llm)
614	call suphel
615	call init_infotrac
616
617	if (nqtot>nqmx) STOP 'Augmenter nqmx dans lmdz1d.F'
618	allocate(q(llm,nqtot)) ; q(:,:)=0.
619	allocate(dq(llm,nqtot))
620	allocate(dq_dyn(llm,nqtot))
621	allocate(d_q_adv(llm,nqtot))
622	allocate(d_q_nudge(llm,nqtot))
623	! allocate(d_th_adv(llm))
624
625	q(:,:) = 0.
626	dq(:,:) = 0.
627	dq_dyn(:,:) = 0.
628	d_q_adv(:,:) = 0.
629	d_q_nudge(:,:) = 0.
630
631	!
632	! No ozone climatology need be read in this pre-initialization
633	! (phys_state_var_init is called again in physiq)
634	read_climoz = 0
635	nsw=6 ! EV et LF: sinon, falb_dir et falb_dif ne peuvent etre alloues
636
637
638	call phys_state_var_init(read_climoz)
639
640	if (ngrid.ne.klon) then
641	print*,'stop in inifis'
642	print*,'Probleme de dimensions :'
643	print*,'ngrid = ',ngrid
644	print*,'klon = ',klon
645	stop
646	endif
647	!!!=====================================================================
648	!!! Feedback forcing values for Gateaux differentiation (al1)
649	!!!=====================================================================
650	!!! Surface Planck forcing bracketing call radiation
651	!! surf_Planck = 0.
652	!! surf_Conv = 0.
653	!! write(,) 'Gateaux-dif Planck,Conv:',surf_Planck,surf_Conv
654	!!! a mettre dans le lmdz1d.def ou autre
655	!!
656	!!
657	qsol = qsolinp
658	qsurf = fq_sat(tsurf,psurf/100.)
659	beta_surf = 1.
660	beta_aridity(:,:) = beta_surf
661	day1= day_ini
662	time=daytime-day
663	ts_toga(1)=tsurf ! needed by read_tsurf1d.F
664	rho(1)=psurf/(rdtsurf(1.+(rv/rd-1.)*qsurf))
665
666	!
667	!! mpl et jyg le 22/08/2012 :
668	!! pour que les cas a flux de surface imposes marchent
669	IF(.NOT.ok_flux_surf.or.max(abs(wtsurf),abs(wqsurf))>0.) THEN
670	fsens=-wtsurfrcpdrho(1)
671	flat=-wqsurfrlvttrho(1)
672	print *,'Flux: ok_flux wtsurf wqsurf',ok_flux_surf,wtsurf,wqsurf
673	ENDIF
674	print*,'Flux sol ',fsens,flat
675	!! ok_flux_surf=.false.
676	!! fsens=-wtsurfrcpdrho(1)
677	!! flat=-wqsurfrlvttrho(1)
678	!!!!
679
680	! Vertical discretization and pressure levels at half and mid levels:
681
682	pa = 5e4
683	!! preff= 1.01325e5
684	preff = psurf
685	IF (ok_old_disvert) THEN
686	call disvert0(pa,preff,ap,bp,dpres,presnivs,nivsigs,nivsig)
687	print *,'On utilise disvert0'
688	aps(1:llm)=0.5*(ap(1:llm)+ap(2:llm+1))
689	bps(1:llm)=0.5*(bp(1:llm)+bp(2:llm+1))
690	scaleheight=8.
691	pseudoalt(1:llm)=-scaleheight*log(presnivs(1:llm)/preff)
692	ELSE
693	call disvert()
694	print *,'On utilise disvert'
695	! Nouvelle version disvert permettant d imposer ap,bp (modif L.Guez) MPL 18092012
696	! Dans ce cas, on lit ap,bp dans le fichier hybrid.txt
697	ENDIF
698
699	sig_s=presnivs/preff
700	plev =ap+bp*psurf
701	play = 0.5*(plev(1:llm)+plev(2:llm+1))
702	zlay=-rd300.log(play/psurf)/rg ! moved after reading profiles
703
704	IF (forcing_type .eq. 59) THEN
705	! pour forcing_sandu, on cherche l'indice le plus proche de 700hpa#3000m
706	write(,) '***********************'
707	do l = 1, llm
708	write(,) 'l,play(l),presnivs(l): ',l,play(l),presnivs(l)
709	if (trouve_700 .and. play(l).le.70000) then
710	llm700=l
711	print *,'llm700,play=',llm700,play(l)/100.
712	trouve_700= .false.
713	endif
714	enddo
715	write(,) '***********************'
716	ENDIF
717
718	!
719	!=====================================================================
720	! EVENTUALLY, READ FORCING DATA :
721	!=====================================================================
722
723	INCLUDE "old_1D_read_forc_cases.h"
724
725	if (forcing_GCM2SCM) then
726	write (,) 'forcing_GCM2SCM not yet implemented'
727	stop 'in initialization'
728	endif ! forcing_GCM2SCM
729
730	print*,'mxcalc=',mxcalc
731	! print*,'zlay=',zlay(mxcalc)
732	print*,'play=',play(mxcalc)
733
734	!Al1 pour SST forced, appell?? depuis ocean_forced_noice
735	! EV tg instead of ts_cur
736
737	tg = tsurf ! SST used in read_tsurf1d
738	!=====================================================================
739	! Initialisation de la physique :
740	!=====================================================================
741
742	! Rq: conf_phys.F90 lit tous les flags de physiq.def; conf_phys appele depuis physiq.F
743	!
744	! day_step, iphysiq lus dans gcm.def ci-dessus
745	! timestep: calcule ci-dessous from rday et day_step
746	! ngrid=1
747	! llm: defini dans .../modipsl/modeles/LMDZ4/libf/grid/dimension
748	! rday: defini dans suphel.F (86400.)
749	! day_ini: lu dans run.def (dayref)
750	! rlat_rad,rlon-rad: transformes en radian de rlat,rlon lus dans lmdz1d.def (en degres)
751	! airefi,zcufi,zcvfi initialises au debut de ce programme
752	! rday,ra,rg,rd,rcpd declares dans YOMCST.h et calcules dans suphel.F
753	day_step = float(nsplit_phys)*day_step/float(iphysiq)
754	write (,) 'Time step divided by nsplit_phys (=',nsplit_phys,')'
755	timestep =rday/day_step
756	dtime_frcg = timestep
757	!
758	zcufi=airefi
759	zcvfi=airefi
760	!
761	rlat_rad(1)=xlat*rpi/180.
762	rlon_rad(1)=xlon*rpi/180.
763
764	! iniphysiq will call iniaqua who needs year_len from phys_cal_mod
765	year_len_phys_cal_mod=year_len
766
767	! Ehouarn: iniphysiq requires arrays related to (3D) dynamics grid,
768	! e.g. for cell boundaries, which are meaningless in 1D; so pad these
769	! with '0.' when necessary
770	call iniphysiq(iim,jjm,llm, &
771	1,comm_lmdz, &
772	rday,day_ini,timestep, &
773	(/rlat_rad(1),0./),(/0./), &
774	(/0.,0./),(/rlon_rad(1),0./), &
775	(/ (/airefi,0./),(/0.,0./) /), &
776	(/zcufi,0.,0.,0./), &
777	(/zcvfi,0./), &
778	ra,rg,rd,rcpd,1)
779	print*,'apres iniphysiq'
780
781	! 2 PARAMETRES QUI DEVRAIENT ETRE LUS DANS run.def MAIS NE LE SONT PAS ICI:
782	co2_ppm= 330.0
783	solaire=1370.0
784
785	! Ecriture du startphy avant le premier appel a la physique.
786	! On le met juste avant pour avoir acces a tous les champs
787
788	if (ok_writedem) then
789
790	!--------------------------------------------------------------------------
791	! pbl_surface_init (called here) and pbl_surface_final (called by phyredem)
792	! need : qsol fder snow qsurf evap rugos agesno ftsoil
793	!--------------------------------------------------------------------------
794
795	type_ocean = "force"
796	run_off_lic_0(1) = restart_runoff
797	call fonte_neige_init(run_off_lic_0)
798
799	fder=0.
800	snsrf(1,:)=snowmass ! masse de neige des sous surface
801	print *, 'snsrf', snsrf
802	qsurfsrf(1,:)=qsurf ! humidite de l'air des sous surface
803	fevap=0.
804	z0m(1,:)=rugos ! couverture de neige des sous surface
805	z0h(1,:)=rugosh ! couverture de neige des sous surface
806	agesno = xagesno
807	tsoil(:,:,:)=tsurf
808	!------ AMMA 2e run avec modele sol et rayonnement actif (MPL 23052012)
809	! tsoil(1,1,1)=299.18
810	! tsoil(1,2,1)=300.08
811	! tsoil(1,3,1)=301.88
812	! tsoil(1,4,1)=305.48
813	! tsoil(1,5,1)=308.00
814	! tsoil(1,6,1)=308.00
815	! tsoil(1,7,1)=308.00
816	! tsoil(1,8,1)=308.00
817	! tsoil(1,9,1)=308.00
818	! tsoil(1,10,1)=308.00
819	! tsoil(1,11,1)=308.00
820	!-----------------------------------------------------------------------
821	call pbl_surface_init(fder, snsrf, qsurfsrf, tsoil)
822
823	!------------------ prepare limit conditions for limit.nc -----------------
824	!-- Ocean force
825
826	print*,'avant phyredem'
827	pctsrf(1,:)=0.
828	if (nat_surf.eq.0.) then
829	pctsrf(1,is_oce)=1.
830	pctsrf(1,is_ter)=0.
831	pctsrf(1,is_lic)=0.
832	pctsrf(1,is_sic)=0.
833	else if (nat_surf .eq. 1) then
834	pctsrf(1,is_oce)=0.
835	pctsrf(1,is_ter)=1.
836	pctsrf(1,is_lic)=0.
837	pctsrf(1,is_sic)=0.
838	else if (nat_surf .eq. 2) then
839	pctsrf(1,is_oce)=0.
840	pctsrf(1,is_ter)=0.
841	pctsrf(1,is_lic)=1.
842	pctsrf(1,is_sic)=0.
843	else if (nat_surf .eq. 3) then
844	pctsrf(1,is_oce)=0.
845	pctsrf(1,is_ter)=0.
846	pctsrf(1,is_lic)=0.
847	pctsrf(1,is_sic)=1.
848
849	end if
850
851	print*,'nat_surf,pctsrf(1,is_oce),pctsrf(1,is_ter)',nat_surf &
852	& ,pctsrf(1,is_oce),pctsrf(1,is_ter)
853
854	zmasq=pctsrf(1,is_ter)+pctsrf(1,is_lic)
855	zpic = zpicinp
856	ftsol=tsurf
857	falb_dir=albedo
858	falb_dif=albedo
859	rugoro=rugos
860	t_ancien(1,:)=temp(:)
861	q_ancien(1,:)=q(:,1)
862	ql_ancien = 0.
863	qs_ancien = 0.
864	prlw_ancien = 0.
865	prsw_ancien = 0.
866	prw_ancien = 0.
867	IF ( ok_bs ) THEN
868	qbs_ancien = 0.
869	prbsw_ancien = 0.
870	ENDIF
871	IF ( ok_ice_supersat ) THEN
872	cf_ancien = 0.
873	rvc_ancien = 0.
874	ENDIF
875	!jyg<
876	!! pbl_tke(:,:,:)=1.e-8
877	pbl_tke(:,:,:)=0.
878	pbl_tke(:,2,:)=1.e-2
879	PRINT *, ' pbl_tke dans lmdz1d '
880	if (prt_level .ge. 5) then
881	DO nsrf = 1,4
882	PRINT *,'pbl_tke(1,:,',nsrf,') ',pbl_tke(1,:,nsrf)
883	ENDDO
884	end if
885
886	!>jyg
887
888	rain_fall=0.
889	snow_fall=0.
890	solsw=0.
891	solswfdiff=0.
892	sollw=0.
893	sollwdown=rsigmatsurf*4
894	radsol=0.
895	rnebcon=0.
896	ratqs=0.
897	clwcon=0.
898	zmax0 = 0.
899	zmea=zsurf
900	zstd=0.
901	zsig=0.
902	zgam=0.
903	zval=0.
904	zthe=0.
905	sig1=0.
906	w01=0.
907	!
908	wake_deltaq = 0.
909	wake_deltat = 0.
910	wake_delta_pbl_TKE(:,:,:) = 0.
911	delta_tsurf = 0.
912	wake_fip = 0.
913	wake_pe = 0.
914	wake_s = 0.
915	awake_s = 0.
916	wake_dens = 0.
917	awake_dens = 0.
918	cv_gen = 0.
919	wake_cstar = 0.
920	ale_bl = 0.
921	ale_bl_trig = 0.
922	alp_bl = 0.
923	IF (ALLOCATED(du_gwd_rando)) du_gwd_rando = 0.
924	IF (ALLOCATED(du_gwd_front)) du_gwd_front = 0.
925	entr_therm = 0.
926	detr_therm = 0.
927	f0 = 0.
928	fm_therm = 0.
929	u_ancien(1,:)=u(:)
930	v_ancien(1,:)=v(:)
931
932	u10m=0.
933	v10m=0.
934	ale_wake=0.
935	ale_bl_stat=0.
936
937	!------------------------------------------------------------------------
938	! Make file containing restart for the physics (startphy.nc)
939	!
940	! NB: List of the variables to be written by phyredem (via put_field):
941	! rlon,rlat,zmasq,pctsrf(:,is_ter),pctsrf(:,is_lic),pctsrf(:,is_oce)
942	! pctsrf(:,is_sic),ftsol(:,nsrf),tsoil(:,isoil,nsrf),qsurf(:,nsrf)
943	! qsol,falb_dir(:,nsrf),falb_dif(:,nsrf),evap(:,nsrf),snow(:,nsrf)
944	! radsol,solsw,solswfdiff,sollw, sollwdown,fder,rain_fall,snow_fall,frugs(:,nsrf)
945	! agesno(:,nsrf),zmea,zstd,zsig,zgam,zthe,zpic,zval,rugoro
946	! t_ancien,q_ancien,,frugs(:,is_oce),clwcon(:,1),rnebcon(:,1),ratqs(:,1)
947	! run_off_lic_0,pbl_tke(:,1:klev,nsrf), zmax0,f0,sig1,w01
948	! wake_deltat,wake_deltaq,wake_s,awake_s,wake_dens,awake_dens,cv_gen,wake_cstar,
949	! wake_fip,wake_delta_pbl_tke(:,1:klev,nsrf)
950	!
951	! NB2: The content of the startphy.nc file depends on some flags defined in
952	! the ".def" files. However, since conf_phys is not called in lmdz1d.F90, these flags have
953	! to be set at some arbitratry convenient values.
954	!------------------------------------------------------------------------
955	!Al1 =============== restart option ==========================
956	iflag_physiq=0
957	call getin('iflag_physiq',iflag_physiq)
958
959	if (.not.restart) then
960	iflag_pbl = 5
961	call phyredem ("startphy.nc")
962	else
963	! (desallocations)
964	print*,'callin surf final'
965	call pbl_surface_final( fder, snsrf, qsurfsrf, tsoil)
966	print*,'after surf final'
967	CALL fonte_neige_final(run_off_lic_0)
968	endif
969
970	ok_writedem=.false.
971	print*,'apres phyredem'
972
973	endif ! ok_writedem
974
975	!------------------------------------------------------------------------
976	! Make file containing boundary conditions (limit.nc) Al1->restartdyn*
977	! --------------------------------------------------
978	! NB: List of the variables to be written in limit.nc
979	! (by writelim.F, subroutine of 1DUTILS.h):
980	! phy_nat,phy_alb,phy_sst,phy_bil,phy_rug,phy_ice,
981	! phy_fter,phy_foce,phy_flic,phy_fsic)
982	!------------------------------------------------------------------------
983	do i=1,year_len
984	phy_nat(i) = nat_surf
985	phy_alb(i) = albedo
986	phy_sst(i) = tsurf ! read_tsurf1d will be used instead
987	phy_rug(i) = rugos
988	phy_fter(i) = pctsrf(1,is_ter)
989	phy_foce(i) = pctsrf(1,is_oce)
990	phy_fsic(i) = pctsrf(1,is_sic)
991	phy_flic(i) = pctsrf(1,is_lic)
992	enddo
993
994	! fabrication de limit.nc
995	call writelim (1,phy_nat,phy_alb,phy_sst,phy_bil,phy_rug, &
996	& phy_ice,phy_fter,phy_foce,phy_flic,phy_fsic)
997
998
999	call phys_state_var_end
1000	!Al1
1001	if (restart) then
1002	print*,'call to restart dyn 1d'
1003	Call dyn1deta0("start1dyn.nc",plev,play,phi,phis,presnivs, &
1004	& u,v,temp,q,omega2)
1005
1006	print*,'fnday,annee_ref,day_ref,day_ini', &
1007	& fnday,annee_ref,day_ref,day_ini
1008	!** call ymds2ju(annee_ref,mois,day_ini,heure,day)
1009	day = day_ini
1010	day_end = day_ini + nday
1011	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
1012
1013	! Print out the actual date of the beginning of the simulation :
1014	call ju2ymds(daytime, an, mois, jour, heure)
1015	print *,' Time of beginning : y m d h',an, mois,jour,heure/3600.
1016
1017	day = int(daytime)
1018	time=daytime-day
1019
1020	print,'*** intialised fields from restart1dyn *****'
1021	print*,'plev,play,phi,phis,presnivs,u,v,temp,q,omega2'
1022	print*,'temp(1),q(1,1),u(1),v(1),plev(1),phis :'
1023	print*,temp(1),q(1,1),u(1),v(1),plev(1),phis
1024	! raz for safety
1025	do l=1,llm
1026	dq_dyn(l,1) = 0.
1027	enddo
1028	endif
1029	!Al1 ================ end restart =================================
1030	IF (ecrit_slab_oc.eq.1) then
1031	open(97,file='div_slab.dat',STATUS='UNKNOWN')
1032	elseif (ecrit_slab_oc.eq.0) then
1033	open(97,file='div_slab.dat',STATUS='OLD')
1034	endif
1035	!
1036	!---------------------------------------------------------------------
1037	! Initialize target profile for RHT nudging if needed
1038	!---------------------------------------------------------------------
1039	if (nudge(inudge_RHT)) then
1040	call nudge_RHT_init(plev,play,temp,q(:,1),t_targ,rh_targ)
1041	endif
1042	if (nudge(inudge_UV)) then
1043	call nudge_UV_init(plev,play,u,v,u_targ,v_targ)
1044	endif
1045	!
1046	!=====================================================================
1047	IF (CPPKEY_OUTPUTPHYSSCM) THEN
1048	CALL iophys_ini(timestep)
1049	END IF
1050	! START OF THE TEMPORAL LOOP :
1051	!=====================================================================
1052
1053	it_end = nint(fnday*day_step)
1054	!test JLD it_end = 10
1055	do while(it.le.it_end)
1056
1057	if (prt_level.ge.1) then
1058	print*,'XXXXXXXXXXXXXXXXXXX ITAP,day,time=', &
1059	& it,day,time,it_end,day_step
1060	print*,'PAS DE TEMPS ',timestep
1061	endif
1062	!Al1 demande de restartphy.nc
1063	if (it.eq.it_end) lastcall=.True.
1064
1065	!---------------------------------------------------------------------
1066	! Geopotential :
1067	!---------------------------------------------------------------------
1068
1069	phi(1)=RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
1070	do l = 1, llm-1
1071	phi(l+1)=phi(l)+RD(temp(l)+temp(l+1)) &
1072	& (play(l)-play(l+1))/(play(l)+play(l+1))
1073	enddo
1074
1075	!---------------------------------------------------------------------
1076	! Interpolation of forcings in time and onto model levels
1077	!---------------------------------------------------------------------
1078
1079	INCLUDE "old_1D_interp_cases.h"
1080
1081	if (forcing_GCM2SCM) then
1082	write (,) 'forcing_GCM2SCM not yet implemented'
1083	stop 'in time loop'
1084	endif ! forcing_GCM2SCM
1085
1086	!!!!---------------------------------------------------------------------
1087	!!!! Geopotential :
1088	!!!!---------------------------------------------------------------------
1089	!!!
1090	!!! phi(1)=RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
1091	!!! do l = 1, llm-1
1092	!!! phi(l+1)=phi(l)+RD(temp(l)+temp(l+1)) &
1093	!!! & (play(l)-play(l+1))/(play(l)+play(l+1))
1094	!!! enddo
1095
1096	!---------------------------------------------------------------------
1097	! Listing output for debug prt_level>=1
1098	!---------------------------------------------------------------------
1099	if (prt_level>=1) then
1100	print *,' avant physiq : -------- day time ',day,time
1101	write(,) 'firstcall,lastcall,phis', &
1102	& firstcall,lastcall,phis
1103	end if
1104	if (prt_level>=5) then
1105	write(*,'(a10,2a4,4a13)') 'BEFOR1 IT=','it','l', &
1106	& 'presniv','plev','play','phi'
1107	write(*,'(a10,2i4,4f13.2)') ('BEFOR1 IT= ',it,l, &
1108	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
1109	write(*,'(a11,2a4,a11,6a8)') 'BEFOR2','it','l', &
1110	& 'presniv','u','v','temp','q1','q2','omega2'
1111	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('BEFOR2 IT= ',it,l, &
1112	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
1113	endif
1114
1115	!---------------------------------------------------------------------
1116	! Call physiq :
1117	!---------------------------------------------------------------------
1118	call physiq(ngrid,llm, &
1119	firstcall,lastcall,timestep, &
1120	plev,play,phi,phis,presnivs, &
1121	u,v, rot, temp,q,omega2, &
1122	du_phys,dv_phys,dt_phys,dq,dpsrf)
1123	firstcall=.false.
1124
1125	!---------------------------------------------------------------------
1126	! Listing output for debug
1127	!---------------------------------------------------------------------
1128	if (prt_level>=5) then
1129	write(*,'(a11,2a4,4a13)') 'AFTER1 IT=','it','l', &
1130	& 'presniv','plev','play','phi'
1131	write(*,'(a11,2i4,4f13.2)') ('AFTER1 it= ',it,l, &
1132	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
1133	write(*,'(a11,2a4,a11,6a8)') 'AFTER2','it','l', &
1134	& 'presniv','u','v','temp','q1','q2','omega2'
1135	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('AFTER2 it= ',it,l, &
1136	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
1137	write(*,'(a11,2a4,a11,5a8)') 'AFTER3','it','l', &
1138	& 'presniv','du_phys','dv_phys','dt_phys','dq1','dq2'
1139	write(*,'(a11,2i4,f11.2,5f8.2)') ('AFTER3 it= ',it,l, &
1140	& presnivs(l),86400du_phys(l),86400dv_phys(l), &
1141	& 86400dt_phys(l),86400dq(l,1),dq(l,2),l=1,llm)
1142	write(,) 'dpsrf',dpsrf
1143	endif
1144	!---------------------------------------------------------------------
1145	! Add physical tendencies :
1146	!---------------------------------------------------------------------
1147
1148	fcoriolis=2.sin(rpixlat/180.)*romega
1149	if (forcing_radconv .or. forcing_fire) then
1150	fcoriolis=0.0
1151	dt_cooling=0.0
1152	d_t_adv=0.0
1153	d_q_adv=0.0
1154	endif
1155	! print*, 'calcul de fcoriolis ', fcoriolis
1156
1157	if (forcing_toga .or. forcing_GCSSold .or. forcing_twpice &
1158	& .or.forcing_amma .or. forcing_type.eq.101) then
1159	fcoriolis=0.0 ; ug=0. ; vg=0.
1160	endif
1161
1162	if(forcing_rico) then
1163	dt_cooling=0.
1164	endif
1165
1166	!CRio:Attention modif sp??cifique cas de Caroline
1167	if (forcing_type==-1) then
1168	fcoriolis=0.
1169	!Nudging
1170
1171	!on calcule dt_cooling
1172	do l=1,llm
1173	if (play(l).ge.20000.) then
1174	dt_cooling(l)=-1.5/86400.
1175	elseif ((play(l).ge.10000.).and.((play(l).lt.20000.))) then
1176	dt_cooling(l)=-1.5/86400.(play(l)-10000.)/(10000.)-1./86400.(20000.-play(l))/10000.*(temp(l)-200.)
1177	else
1178	dt_cooling(l)=-1.*(temp(l)-200.)/86400.
1179	endif
1180	enddo
1181
1182	endif
1183	!RC
1184	if (forcing_sandu) then
1185	ug(1:llm)=u_mod(1:llm)
1186	vg(1:llm)=v_mod(1:llm)
1187	endif
1188
1189	IF (prt_level >= 5) print*, 'fcoriolis, xlat,mxcalc ', &
1190	fcoriolis, xlat,mxcalc
1191
1192	! print *,'u-ug=',u-ug
1193
1194	!!!!!!!!!!!!!!!!!!!!!!!!
1195	! Geostrophic wind
1196	! Le calcul ci dessous est insuffisamment precis
1197	! du_age(1:mxcalc)=fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
1198	! dv_age(1:mxcalc)=-fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
1199	!!!!!!!!!!!!!!!!!!!!!!!!
1200	sfdt = sin(0.5fcoriolistimestep)
1201	cfdt = cos(0.5fcoriolistimestep)
1202	! print *,'fcoriolis,sfdt,cfdt,timestep',fcoriolis,sfdt,cfdt,timestep
1203	!
1204	du_age(1:mxcalc)= -2.sfdt/timestep &
1205	& (sfdt*(u(1:mxcalc)-ug(1:mxcalc)) - &
1206	& cfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
1207	!! : fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
1208	!
1209	dv_age(1:mxcalc)= -2.sfdt/timestep &
1210	& (cfdt*(u(1:mxcalc)-ug(1:mxcalc)) + &
1211	& sfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
1212	!! : -fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
1213	!
1214	!!!!!!!!!!!!!!!!!!!!!!!!
1215	! Nudging
1216	!!!!!!!!!!!!!!!!!!!!!!!!
1217	d_t_nudge(:) = 0.
1218	d_q_nudge(:,:) = 0.
1219	d_u_nudge(:) = 0.
1220	d_v_nudge(:) = 0.
1221	if (nudge(inudge_RHT)) then
1222	call nudge_RHT(timestep,plev,play,t_targ,rh_targ,temp,q(:,1), &
1223	& d_t_nudge,d_q_nudge(:,1))
1224	endif
1225	if (nudge(inudge_UV)) then
1226	call nudge_UV(timestep,plev,play,u_targ,v_targ,u,v, &
1227	& d_u_nudge,d_v_nudge)
1228	endif
1229	!
1230	if (forcing_fire) THEN
1231
1232	!let ww=if ( alt le 1100 ) then alt*-0.00001 else 0
1233	!let wt=if ( alt le 1100 ) then min( -3.75e-5 , -7.5e-8*alt) else 0
1234	!let wq=if ( alt le 1100 ) then max( 1.5e-8 , 3e-11*alt) else 0
1235	d_t_adv=0.
1236	d_q_adv=0.
1237	teta=temp(pzero/play)*rkappa
1238	d_t_adv=0.
1239	d_q_adv=0.
1240	do l=2,llm-1
1241	if (zlay(l)<=1100) then
1242	wwww=-0.00001*zlay(l)
1243	d_t_adv(l)=-wwww(teta(l)-teta(l+1))/(zlay(l)-zlay(l+1)) /(pzero/play(l))*rkappa
1244	d_q_adv(l,1:2)=-wwww*(q(l,1:2)-q(l+1,1:2))/(zlay(l)-zlay(l+1))
1245	d_t_adv(l)=d_t_adv(l)+min(-3.75e-5 , -7.5e-8*zlay(l))
1246	d_q_adv(l,1)=d_q_adv(l,1)+max( 1.5e-8 , 3e-11*zlay(l))
1247	endif
1248	enddo
1249
1250	endif
1251
1252	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1253	! call writefield_phy('dv_age' ,dv_age,llm)
1254	! call writefield_phy('du_age' ,du_age,llm)
1255	! call writefield_phy('du_phys' ,du_phys,llm)
1256	! call writefield_phy('u_tend' ,u,llm)
1257	! call writefield_phy('u_g' ,ug,llm)
1258	!
1259	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1260	!! Increment state variables
1261	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1262	IF (flag_inhib_forcing == 0) then ! if tendency of forcings should be added
1263
1264	! pour les cas sandu et astex, on reclacule u,v,q,temp et teta dans 1D_nudge_sandu_astex.h
1265	! au dessus de 700hpa, on relaxe vers les profils initiaux
1266	if (forcing_sandu .OR. forcing_astex) then
1267	INCLUDE "1D_nudge_sandu_astex.h"
1268	else
1269	u(1:mxcalc)=u(1:mxcalc) + timestep*( &
1270	& du_phys(1:mxcalc) &
1271	& +du_age(1:mxcalc)+du_adv(1:mxcalc) &
1272	& +d_u_nudge(1:mxcalc) )
1273	v(1:mxcalc)=v(1:mxcalc) + timestep*( &
1274	& dv_phys(1:mxcalc) &
1275	& +dv_age(1:mxcalc)+dv_adv(1:mxcalc) &
1276	& +d_v_nudge(1:mxcalc) )
1277	q(1:mxcalc,:)=q(1:mxcalc,:)+timestep*( &
1278	& dq(1:mxcalc,:) &
1279	& +d_q_adv(1:mxcalc,:) &
1280	& +d_q_nudge(1:mxcalc,:) )
1281
1282	if (prt_level.ge.3) then
1283	print *, &
1284	& 'physiq-> temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1) ', &
1285	& temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1)
1286	print* ,'dv_phys=',dv_phys
1287	print* ,'dv_age=',dv_age
1288	print* ,'dv_adv=',dv_adv
1289	print* ,'d_v_nudge=',d_v_nudge
1290	print*, v
1291	print*, vg
1292	endif
1293
1294	temp(1:mxcalc)=temp(1:mxcalc)+timestep*( &
1295	& dt_phys(1:mxcalc) &
1296	& +d_t_adv(1:mxcalc) &
1297	& +d_t_nudge(1:mxcalc) &
1298	& +dt_cooling(1:mxcalc)) ! Taux de chauffage ou refroid.
1299
1300	IF (CPPKEY_OUTPUTPHYSSCM) THEN
1301	CALL iophys_ecrit('d_t_adv',klev,'d_t_adv','m/s',d_t_adv)
1302	CALL iophys_ecrit('d_t_nudge',klev,'d_t_nudge','m/s',d_t_nudge)
1303	END IF
1304
1305	endif ! forcing_sandu or forcing_astex
1306
1307	teta=temp(pzero/play)*rkappa
1308	!
1309	!---------------------------------------------------------------------
1310	! Nudge soil temperature if requested
1311	!---------------------------------------------------------------------
1312
1313	IF (nudge_tsoil .AND. .NOT. lastcall) THEN
1314	ftsoil(1,isoil_nudge,:) = ftsoil(1,isoil_nudge,:) &
1315	& -timestep/tau_soil_nudge*(ftsoil(1,isoil_nudge,:)-Tsoil_nudge)
1316	ENDIF
1317
1318	!---------------------------------------------------------------------
1319	! Add large-scale tendencies (advection, etc) :
1320	!---------------------------------------------------------------------
1321
1322	!cc nrlmd
1323	!cc tmpvar=teta
1324	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1325	!cc
1326	!cc teta(1:mxcalc)=tmpvar(1:mxcalc)
1327	!cc tmpvar(:)=q(:,1)
1328	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1329	!cc q(1:mxcalc,1)=tmpvar(1:mxcalc)
1330	!cc tmpvar(:)=q(:,2)
1331	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1332	!cc q(1:mxcalc,2)=tmpvar(1:mxcalc)
1333
1334	END IF ! end if tendency of tendency should be added
1335
1336	!---------------------------------------------------------------------
1337	! Air temperature :
1338	!---------------------------------------------------------------------
1339	if (lastcall) then
1340	print*,'Pas de temps final ',it
1341	call ju2ymds(daytime, an, mois, jour, heure)
1342	print*,'a la date : a m j h',an, mois, jour ,heure/3600.
1343	endif
1344
1345	! incremente day time
1346	! print*,'daytime bef',daytime,1./day_step
1347	daytime = daytime+1./day_step
1348	!Al1dbg
1349	day = int(daytime+0.1/day_step)
1350	! time = max(daytime-day,0.0)
1351	!Al1&jyg: correction de bug
1352	!cc time = real(mod(it,day_step))/day_step
1353	time = time_ini/24.+real(mod(it,day_step))/day_step
1354	! print*,'daytime nxt time',daytime,time
1355	it=it+1
1356
1357	enddo
1358
1359	!Al1
1360	if (ecrit_slab_oc.ne.-1) close(97)
1361
1362	!Al1 Call to 1D equivalent of dynredem (an,mois,jour,heure ?)
1363	! -------------------------------------
1364	call dyn1dredem("restart1dyn.nc", &
1365	& plev,play,phi,phis,presnivs, &
1366	& u,v,temp,q,omega2)
1367
1368	CALL abort_gcm ('lmdz1d ','The End ',0)
1369
1370	END SUBROUTINE old_lmdz1d
1371
1372	INCLUDE "old_1DUTILS_read_interp.h"

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format