Context Navigation

old_lmdz1d.f90 @ 5440

Last change on this file since 5440 was 5368, checked in by abarral, 3 weeks ago
(WIP) Turn implicit into explicit declarations Turn 1dconv.h into a module to that end
File size: 51.3 KB

Rev	Line
[3541]	1	!
	2	! $Id: lmdz1d.F90 3540 2019-06-25 14:50:13Z fairhead $
	3	!
	4
	5	SUBROUTINE old_lmdz1d
	6
[5301]	7	USE flux_arp_mod_h
	8	USE compbl_mod_h
[5296]	9	USE clesphys_mod_h
[5282]	10	USE ioipsl, only: ju2ymds, ymds2ju, ioconf_calendar,getin
[3541]	11	USE phys_state_var_mod, ONLY : phys_state_var_init, phys_state_var_end, &
	12	clwcon, detr_therm, &
	13	qsol, fevap, z0m, z0h, agesno, &
	14	du_gwd_rando, du_gwd_front, entr_therm, f0, fm_therm, &
	15	falb_dir, falb_dif, &
[3888]	16	ftsol, beta_aridity, pbl_tke, pctsrf, radsol, rain_fall, snow_fall, ratqs, &
[3541]	17	rnebcon, rugoro, sig1, w01, solaire_etat0, sollw, sollwdown, &
[5205]	18	solsw, solswfdiff, t_ancien, q_ancien, u_ancien, v_ancien, &
[3541]	19	wake_delta_pbl_TKE, delta_tsurf, wake_fip, wake_pe, &
[4744]	20	wake_deltaq, wake_deltat, wake_s, awake_s, wake_dens, &
[3956]	21	awake_dens, cv_gen, wake_cstar, &
[3541]	22	zgam, zmax0, zmea, zpic, zsig, &
[5212]	23	zstd, zthe, zval, ale_bl, ale_bl_trig, alp_bl, &
[5213]	24	ql_ancien, qs_ancien, qbs_ancien, cf_ancien, rvc_ancien, &
	25	prlw_ancien, prsw_ancien, prbsw_ancien, prw_ancien, &
[3575]	26	u10m,v10m,ale_wake,ale_bl_stat
	27
[5282]	28
[3541]	29	USE dimphy
	30	USE surface_data, only : type_ocean,ok_veget
	31	USE pbl_surface_mod, only : ftsoil, pbl_surface_init, &
	32	pbl_surface_final
[5282]	33	USE fonte_neige_mod, only : fonte_neige_init, fonte_neige_final
[3541]	34
	35	USE infotrac ! new
	36	USE control_mod
	37	USE indice_sol_mod
	38	USE phyaqua_mod
	39	! USE mod_1D_cases_read
	40	USE mod_1D_cases_read2
	41	USE mod_1D_amma_read
	42	USE print_control_mod, ONLY: lunout, prt_level
	43	USE iniphysiq_mod, ONLY: iniphysiq
	44	USE mod_const_mpi, ONLY: comm_lmdz
	45	USE physiq_mod, ONLY: physiq
	46	USE comvert_mod, ONLY: presnivs, ap, bp, dpres,nivsig, nivsigs, pa, &
	47	preff, aps, bps, pseudoalt, scaleheight
	48	USE temps_mod, ONLY: annee_ref, calend, day_end, day_ini, day_ref, &
	49	itau_dyn, itau_phy, start_time, year_len
[5260]	50	USE phys_cal_mod, ONLY : year_len_phys_cal_mod => year_len
	51	USE lmdz_cppkeys_wrapper, ONLY: CPPKEY_OUTPUTPHYSSCM
[3541]	52
[5273]	53	USE dimensions_mod, ONLY: iim, jjm, llm, ndm
	54	USE dimsoil_mod_h, ONLY: nsoilmx
[5368]	55	USE yomcst_mod_h
	56	USE tsoilnudge_mod_h
	57	USE fcg_gcssold_mod_h
	58	USE compar1d_mod_h
	59	USE date_cas_mod_h
	60	USE m_1dconv_mod_h, ONLY: get_uvd, get_uvd2, copie
[5271]	61	implicit none
	62
[4593]	63	!!! INCLUDE "fbforcing.h"
[3541]	64
	65	!=====================================================================
	66	! DECLARATIONS
	67	!=====================================================================
	68
	69	!---------------------------------------------------------------------
	70	! Externals
	71	!---------------------------------------------------------------------
	72	external fq_sat
	73	real fq_sat
	74
	75	!---------------------------------------------------------------------
	76	! Arguments d' initialisations de la physique (USER DEFINE)
	77	!---------------------------------------------------------------------
	78
	79	integer, parameter :: ngrid=1
	80	real :: zcufi = 1.
	81	real :: zcvfi = 1.
	82
	83	!- real :: nat_surf
	84	!- logical :: ok_flux_surf
	85	!- real :: fsens
	86	!- real :: flat
	87	!- real :: tsurf
	88	!- real :: rugos
	89	!- real :: qsol(1:2)
	90	!- real :: qsurf
	91	!- real :: psurf
	92	!- real :: zsurf
	93	!- real :: albedo
	94	!-
	95	!- real :: time = 0.
	96	!- real :: time_ini
	97	!- real :: xlat
	98	!- real :: xlon
	99	!- real :: wtsurf
	100	!- real :: wqsurf
	101	!- real :: restart_runoff
	102	!- real :: xagesno
	103	!- real :: qsolinp
	104	!- real :: zpicinp
	105	!-
	106	real :: fnday
	107	real :: day, daytime
	108	real :: day1
	109	real :: heure
	110	integer :: jour
	111	integer :: mois
	112	integer :: an
	113
	114	!---------------------------------------------------------------------
	115	! Declarations related to forcing and initial profiles
	116	!---------------------------------------------------------------------
	117
	118	integer :: kmax = llm
	119	integer llm700,nq1,nq2
	120	INTEGER, PARAMETER :: nlev_max=1000, nqmx=1000
	121	real timestep, frac
	122	real height(nlev_max),tttprof(nlev_max),qtprof(nlev_max)
	123	real uprof(nlev_max),vprof(nlev_max),e12prof(nlev_max)
	124	real ugprof(nlev_max),vgprof(nlev_max),wfls(nlev_max)
	125	real dqtdxls(nlev_max),dqtdyls(nlev_max)
	126	real dqtdtls(nlev_max),thlpcar(nlev_max)
	127	real qprof(nlev_max,nqmx)
	128
	129	! integer :: forcing_type
	130	logical :: forcing_les = .false.
	131	logical :: forcing_armcu = .false.
	132	logical :: forcing_rico = .false.
	133	logical :: forcing_radconv = .false.
	134	logical :: forcing_toga = .false.
	135	logical :: forcing_twpice = .false.
	136	logical :: forcing_amma = .false.
	137	logical :: forcing_dice = .false.
	138	logical :: forcing_gabls4 = .false.
	139
	140	logical :: forcing_GCM2SCM = .false.
	141	logical :: forcing_GCSSold = .false.
	142	logical :: forcing_sandu = .false.
	143	logical :: forcing_astex = .false.
	144	logical :: forcing_fire = .false.
	145	logical :: forcing_case = .false.
	146	logical :: forcing_case2 = .false.
	147	logical :: forcing_SCM = .false.
	148	integer :: type_ts_forcing ! 0 = SST constant; 1 = SST read from a file
	149	! (cf read_tsurf1d.F)
	150
	151	real wwww
	152	!vertical advection computation
	153	! real d_t_z(llm), d_q_z(llm)
	154	! real d_t_dyn_z(llm), dq_dyn_z(llm)
	155	! real zz(llm)
	156	! real zfact
	157
	158	!flag forcings
	159	logical :: nudge_wind=.true.
	160	logical :: nudge_thermo=.false.
	161	logical :: cptadvw=.true.
	162	!=====================================================================
	163	! DECLARATIONS FOR EACH CASE
	164	!=====================================================================
	165	!
[4593]	166	INCLUDE "old_1D_decl_cases.h"
[3541]	167	!
	168	!---------------------------------------------------------------------
	169	! Declarations related to nudging
	170	!---------------------------------------------------------------------
	171	integer :: nudge_max
	172	parameter (nudge_max=9)
	173	integer :: inudge_RHT=1
	174	integer :: inudge_UV=2
	175	logical :: nudge(nudge_max)
	176	real :: t_targ(llm)
	177	real :: rh_targ(llm)
	178	real :: u_targ(llm)
	179	real :: v_targ(llm)
	180	!
	181	!---------------------------------------------------------------------
	182	! Declarations related to vertical discretization:
	183	!---------------------------------------------------------------------
	184	real :: pzero=1.e5
	185	real :: play (llm),zlay (llm),sig_s(llm),plev(llm+1)
	186	real :: playd(llm),zlayd(llm),ap_amma(llm+1),bp_amma(llm+1)
	187
	188	!---------------------------------------------------------------------
	189	! Declarations related to variables
	190	!---------------------------------------------------------------------
	191
	192	real :: phi(llm)
	193	real :: teta(llm),tetal(llm),temp(llm),u(llm),v(llm),w(llm)
	194	REAL rot(1, llm) ! relative vorticity, in s-1
	195	real :: rlat_rad(1),rlon_rad(1)
	196	real :: omega(llm+1),omega2(llm),rho(llm+1)
	197	real :: ug(llm),vg(llm),fcoriolis
	198	real :: sfdt, cfdt
	199	real :: du_phys(llm),dv_phys(llm),dt_phys(llm)
	200	real :: dt_dyn(llm)
	201	real :: dt_cooling(llm),d_t_adv(llm),d_t_nudge(llm)
	202	real :: d_u_nudge(llm),d_v_nudge(llm)
	203	real :: du_adv(llm),dv_adv(llm)
	204	real :: du_age(llm),dv_age(llm)
	205	real :: alpha
	206	real :: ttt
	207
	208	REAL, ALLOCATABLE, DIMENSION(:,:):: q
	209	REAL, ALLOCATABLE, DIMENSION(:,:):: dq
	210	REAL, ALLOCATABLE, DIMENSION(:,:):: dq_dyn
	211	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_adv
	212	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_nudge
	213	! REAL, ALLOCATABLE, DIMENSION(:):: d_th_adv
	214
	215	!---------------------------------------------------------------------
	216	! Initialization of surface variables
	217	!---------------------------------------------------------------------
	218	real :: run_off_lic_0(1)
	219	real :: fder(1),snsrf(1,nbsrf),qsurfsrf(1,nbsrf)
	220	real :: tsoil(1,nsoilmx,nbsrf)
	221	! real :: agesno(1,nbsrf)
	222
	223	!---------------------------------------------------------------------
	224	! Call to phyredem
	225	!---------------------------------------------------------------------
	226	logical :: ok_writedem =.true.
	227	real :: sollw_in = 0.
	228	real :: solsw_in = 0.
	229
	230	!---------------------------------------------------------------------
	231	! Call to physiq
	232	!---------------------------------------------------------------------
	233	logical :: firstcall=.true.
	234	logical :: lastcall=.false.
	235	real :: phis(1) = 0.0
	236	real :: dpsrf(1)
	237
	238	!---------------------------------------------------------------------
	239	! Initializations of boundary conditions
	240	!---------------------------------------------------------------------
	241	real, allocatable :: phy_nat (:) ! 0=ocean libre,1=land,2=glacier,3=banquise
	242	real, allocatable :: phy_alb (:) ! Albedo land only (old value condsurf_jyg=0.3)
	243	real, allocatable :: phy_sst (:) ! SST (will not be used; cf read_tsurf1d.F)
	244	real, allocatable :: phy_bil (:) ! Ne sert que pour les slab_ocean
	245	real, allocatable :: phy_rug (:) ! Longueur rugosite utilisee sur land only
	246	real, allocatable :: phy_ice (:) ! Fraction de glace
	247	real, allocatable :: phy_fter(:) ! Fraction de terre
	248	real, allocatable :: phy_foce(:) ! Fraction de ocean
	249	real, allocatable :: phy_fsic(:) ! Fraction de glace
	250	real, allocatable :: phy_flic(:) ! Fraction de glace
	251
	252	!---------------------------------------------------------------------
	253	! Fichiers et d'autres variables
	254	!---------------------------------------------------------------------
	255	integer :: k,l,i,it=1,mxcalc
	256	integer :: nsrf
	257	integer jcode
	258	INTEGER read_climoz
	259	!
	260	integer :: it_end ! iteration number of the last call
	261	!Al1
	262	integer ecrit_slab_oc !1=ecrit,-1=lit,0=no file
	263	data ecrit_slab_oc/-1/
	264	!
	265	! if flag_inhib_forcing = 0, tendencies of forcing are added
	266	! <> 0, tendencies of forcing are not added
	267	INTEGER :: flag_inhib_forcing = 0
	268
	269	!=====================================================================
	270	! INITIALIZATIONS
	271	!=====================================================================
	272	du_phys(:)=0.
	273	dv_phys(:)=0.
	274	dt_phys(:)=0.
	275	dt_dyn(:)=0.
	276	dt_cooling(:)=0.
	277	d_t_adv(:)=0.
	278	d_t_nudge(:)=0.
	279	d_u_nudge(:)=0.
	280	d_v_nudge(:)=0.
	281	du_adv(:)=0.
	282	dv_adv(:)=0.
	283	du_age(:)=0.
	284	dv_age(:)=0.
	285
	286	! Initialization of Common turb_forcing
	287	dtime_frcg = 0.
	288	Turb_fcg_gcssold=.false.
	289	hthturb_gcssold = 0.
	290	hqturb_gcssold = 0.
	291
	292
	293
	294
	295	!---------------------------------------------------------------------
	296	! OPTIONS OF THE 1D SIMULATION (lmdz1d.def => unicol.def)
	297	!---------------------------------------------------------------------
	298	!Al1
	299	call conf_unicol
	300	!Al1 moves this gcssold var from common fcg_gcssold to
	301	Turb_fcg_gcssold = xTurb_fcg_gcssold
	302	! --------------------------------------------------------------------
	303	close(1)
	304	!Al1
	305	write(,) 'lmdz1d.def lu => unicol.def'
	306
	307	! forcing_type defines the way the SCM is forced:
	308	!forcing_type = 0 ==> forcing_les = .true.
	309	! initial profiles from file prof.inp.001
	310	! no forcing by LS convergence ;
	311	! surface temperature imposed ;
	312	! radiative cooling may be imposed (iflag_radia=0 in physiq.def)
	313	!forcing_type = 1 ==> forcing_radconv = .true.
	314	! idem forcing_type = 0, but the imposed radiative cooling
	315	! is set to 0 (hence, if iflag_radia=0 in physiq.def,
	316	! then there is no radiative cooling at all)
	317	!forcing_type = 2 ==> forcing_toga = .true.
	318	! initial profiles from TOGA-COARE IFA files
	319	! LS convergence and SST imposed from TOGA-COARE IFA files
	320	!forcing_type = 3 ==> forcing_GCM2SCM = .true.
	321	! initial profiles from the GCM output
	322	! LS convergence imposed from the GCM output
	323	!forcing_type = 4 ==> forcing_twpice = .true.
	324	! initial profiles from TWP-ICE cdf file
	325	! LS convergence, omega and SST imposed from TWP-ICE files
	326	!forcing_type = 5 ==> forcing_rico = .true.
	327	! initial profiles from RICO files
	328	! LS convergence imposed from RICO files
	329	!forcing_type = 6 ==> forcing_amma = .true.
	330	! initial profiles from AMMA nc file
	331	! LS convergence, omega and surface fluxes imposed from AMMA file
	332	!forcing_type = 7 ==> forcing_dice = .true.
	333	! initial profiles and large scale forcings in dice_driver.nc
	334	! Different stages: soil model alone, atm. model alone
	335	! then both models coupled
	336	!forcing_type = 8 ==> forcing_gabls4 = .true.
	337	! initial profiles and large scale forcings in gabls4_driver.nc
	338	!forcing_type >= 100 ==> forcing_case = .true.
	339	! initial profiles and large scale forcings in cas.nc
	340	! LS convergence, omega and SST imposed from CINDY-DYNAMO files
	341	! 101=cindynamo
	342	! 102=bomex
	343	!forcing_type >= 100 ==> forcing_case2 = .true.
	344	! temporary flag while all the 1D cases are not whith the same cas.nc forcing file
	345	! 103=arm_cu2 ie arm_cu with new forcing format
	346	! 104=rico2 ie rico with new forcing format
	347	!forcing_type = 40 ==> forcing_GCSSold = .true.
	348	! initial profile from GCSS file
	349	! LS convergence imposed from GCSS file
	350	!forcing_type = 50 ==> forcing_fire = .true.
	351	! forcing from fire.nc
	352	!forcing_type = 59 ==> forcing_sandu = .true.
	353	! initial profiles from sanduref file: see prof.inp.001
	354	! SST varying with time and divergence constante: see ifa_sanduref.txt file
	355	! Radiation has to be computed interactively
	356	!forcing_type = 60 ==> forcing_astex = .true.
	357	! initial profiles from file: see prof.inp.001
	358	! SST,divergence,ug,vg,ufa,vfa varying with time : see ifa_astex.txt file
	359	! Radiation has to be computed interactively
	360	!forcing_type = 61 ==> forcing_armcu = .true.
	361	! initial profiles from file: see prof.inp.001
	362	! sensible and latent heat flux imposed: see ifa_arm_cu_1.txt
	363	! large scale advective forcing & radiative tendencies applied below 1000m: see ifa_arm_cu_2.txt
	364	! use geostrophic wind ug=10m/s vg=0m/s. Duration of the case 53100s
	365	! Radiation to be switched off
	366	!
	367	if (forcing_type <=0) THEN
	368	forcing_les = .true.
[5084]	369	elseif (forcing_type .eq.1) THEN
[3541]	370	forcing_radconv = .true.
[5084]	371	elseif (forcing_type .eq.2) THEN
[3541]	372	forcing_toga = .true.
[5084]	373	elseif (forcing_type .eq.3) THEN
[3541]	374	forcing_GCM2SCM = .true.
[5084]	375	elseif (forcing_type .eq.4) THEN
[3541]	376	forcing_twpice = .true.
[5084]	377	elseif (forcing_type .eq.5) THEN
[3541]	378	forcing_rico = .true.
[5084]	379	elseif (forcing_type .eq.6) THEN
[3541]	380	forcing_amma = .true.
[5084]	381	elseif (forcing_type .eq.7) THEN
[3541]	382	forcing_dice = .true.
[5084]	383	elseif (forcing_type .eq.8) THEN
[3541]	384	forcing_gabls4 = .true.
[5084]	385	elseif (forcing_type .eq.101) THEN ! Cindynamo starts 1-10-2011 0h
[3541]	386	forcing_case = .true.
	387	year_ini_cas=2011
	388	mth_ini_cas=10
	389	day_deb=1
	390	heure_ini_cas=0.
	391	pdt_cas=3*3600. ! forcing frequency
[5084]	392	elseif (forcing_type .eq.102) THEN ! Bomex starts 24-6-1969 0h
[3541]	393	forcing_case = .true.
	394	year_ini_cas=1969
	395	mth_ini_cas=6
	396	day_deb=24
	397	heure_ini_cas=0.
	398	pdt_cas=1800. ! forcing frequency
[5084]	399	elseif (forcing_type .eq.103) THEN ! Arm_cu starts 21-6-1997 11h30
[3541]	400	forcing_case2 = .true.
	401	year_ini_cas=1997
	402	mth_ini_cas=6
	403	day_deb=21
	404	heure_ini_cas=11.5
	405	pdt_cas=1800. ! forcing frequency
[5084]	406	elseif (forcing_type .eq.104) THEN ! rico starts 16-12-2004 0h
[3541]	407	forcing_case2 = .true.
	408	year_ini_cas=2004
	409	mth_ini_cas=12
	410	day_deb=16
	411	heure_ini_cas=0.
	412	pdt_cas=1800. ! forcing frequency
[5084]	413	elseif (forcing_type .eq.105) THEN ! bomex starts 16-12-2004 0h
[3541]	414	forcing_case2 = .true.
	415	year_ini_cas=1969
	416	mth_ini_cas=6
	417	day_deb=24
	418	heure_ini_cas=0.
	419	pdt_cas=1800. ! forcing frequency
[5084]	420	elseif (forcing_type .eq.106) THEN ! ayotte_24SC starts 6-11-1992 0h
[3541]	421	forcing_case2 = .true.
	422	year_ini_cas=1992
	423	mth_ini_cas=11
	424	day_deb=6
	425	heure_ini_cas=10.
	426	pdt_cas=86400. ! forcing frequency
[5084]	427	elseif (forcing_type .eq.113) THEN ! Arm_cu starts 21-6-1997 11h30
[3541]	428	forcing_SCM = .true.
	429	year_ini_cas=1997
	430	! It is possible that those parameters are run twice.
	431	call getin('anneeref',year_ini_cas)
	432	call getin('dayref',day_deb)
	433	mth_ini_cas=1 ! pour le moment on compte depuis le debut de l'annee
	434	call getin('time_ini',heure_ini_cas)
[5084]	435	elseif (forcing_type .eq.40) THEN
[3541]	436	forcing_GCSSold = .true.
[5084]	437	elseif (forcing_type .eq.50) THEN
[3541]	438	forcing_fire = .true.
[5084]	439	elseif (forcing_type .eq.59) THEN
[3541]	440	forcing_sandu = .true.
[5084]	441	elseif (forcing_type .eq.60) THEN
[3541]	442	forcing_astex = .true.
[5084]	443	elseif (forcing_type .eq.61) THEN
[3541]	444	forcing_armcu = .true.
[5084]	445	IF(llm.NE.19.AND.llm.NE.40) stop 'Erreur nombre de niveaux !!'
[3541]	446	else
	447	write (,) 'ERROR : unknown forcing_type ', forcing_type
	448	stop 'Forcing_type should be 0,1,2,3,4,5,6 or 40,59,60,61'
	449	ENDIF
	450	print*,"forcing type=",forcing_type
	451
	452	! if type_ts_forcing=0, the surface temp of 1D simulation is constant in time
	453	! (specified by tsurf in lmdz1d.def); if type_ts_forcing=1, the surface temperature
	454	! varies in time according to a forcing (e.g. forcing_toga) and is passed to read_tsurf1d.F
	455	! through the common sst_forcing.
	456
	457	type_ts_forcing = 0
	458	if (forcing_toga.or.forcing_sandu.or.forcing_astex .or. forcing_dice) &
	459	& type_ts_forcing = 1
	460	!
	461	! Initialization of the logical switch for nudging
	462	jcode = iflag_nudge
	463	do i = 1,nudge_max
[5084]	464	nudge(i) = mod(jcode,10) .ge. 1
[3541]	465	jcode = jcode/10
	466	enddo
	467	!---------------------------------------------------------------------
	468	! Definition of the run
	469	!---------------------------------------------------------------------
	470
	471	call conf_gcm( 99, .TRUE. )
	472
	473	!-----------------------------------------------------------------------
	474	allocate( phy_nat (year_len)) ! 0=ocean libre,1=land,2=glacier,3=banquise
	475	phy_nat(:)=0.0
	476	allocate( phy_alb (year_len)) ! Albedo land only (old value condsurf_jyg=0.3)
	477	allocate( phy_sst (year_len)) ! SST (will not be used; cf read_tsurf1d.F)
	478	allocate( phy_bil (year_len)) ! Ne sert que pour les slab_ocean
	479	phy_bil(:)=1.0
	480	allocate( phy_rug (year_len)) ! Longueur rugosite utilisee sur land only
	481	allocate( phy_ice (year_len)) ! Fraction de glace
	482	phy_ice(:)=0.0
	483	allocate( phy_fter(year_len)) ! Fraction de terre
	484	phy_fter(:)=0.0
	485	allocate( phy_foce(year_len)) ! Fraction de ocean
	486	phy_foce(:)=0.0
	487	allocate( phy_fsic(year_len)) ! Fraction de glace
	488	phy_fsic(:)=0.0
	489	allocate( phy_flic(year_len)) ! Fraction de glace
	490	phy_flic(:)=0.0
	491	!-----------------------------------------------------------------------
	492	! Choix du calendrier
	493	! -------------------
	494
	495	! calend = 'earth_365d'
	496	if (calend == 'earth_360d') then
[4361]	497	call ioconf_calendar('360_day')
[3541]	498	write(,)'CALENDRIER CHOISI: Terrestre a 360 jours/an'
	499	else if (calend == 'earth_365d') then
	500	call ioconf_calendar('noleap')
	501	write(,)'CALENDRIER CHOISI: Terrestre a 365 jours/an'
	502	else if (calend == 'earth_366d') then
	503	call ioconf_calendar('all_leap')
	504	write(,)'CALENDRIER CHOISI: Terrestre bissextile'
	505	else if (calend == 'gregorian') then
	506	stop 'gregorian calend should not be used by normal user'
	507	call ioconf_calendar('gregorian') ! not to be used by normal users
	508	write(,)'CALENDRIER CHOISI: Gregorien'
	509	else
	510	write (,) 'ERROR : unknown calendar ', calend
	511	stop 'calend should be 360d,earth_365d,earth_366d,gregorian'
	512	endif
	513	!-----------------------------------------------------------------------
	514	!
	515	!c Date :
	516	! La date est supposee donnee sous la forme [annee, numero du jour dans
	517	! l annee] ; l heure est donnee dans time_ini, lu dans lmdz1d.def.
	518	! On appelle ymds2ju pour convertir [annee, jour] en [jour Julien].
	519	! Le numero du jour est dans "day". L heure est traitee separement.
	520	! La date complete est dans "daytime" (l'unite est le jour).
	521	if (nday>0) then
	522	fnday=nday
	523	else
	524	fnday=-nday/float(day_step)
	525	endif
	526	print *,'fnday=',fnday
	527	! start_time doit etre en FRACTION DE JOUR
	528	start_time=time_ini/24.
	529
	530	! Special case for arm_cu which lasts less than one day : 53100s !! (MPL 20111026)
[5084]	531	IF(forcing_type .EQ. 61) fnday=53100./86400.
	532	IF(forcing_type .EQ. 103) fnday=53100./86400.
[3541]	533	! Special case for amma which lasts less than one day : 64800s !! (MPL 20120216)
[5084]	534	IF(forcing_type .EQ. 6) fnday=64800./86400.
[3541]	535	! IF(forcing_type .EQ. 6) fnday=50400./86400.
[5084]	536	IF(forcing_type .EQ. 8 ) fnday=129600./86400.
[3541]	537	annee_ref = anneeref
	538	mois = 1
	539	day_ref = dayref
	540	heure = 0.
	541	itau_dyn = 0
	542	itau_phy = 0
	543	call ymds2ju(annee_ref,mois,day_ref,heure,day)
	544	day_ini = int(day)
	545	day_end = day_ini + int(fnday)
	546
[5084]	547	IF (forcing_type .eq.2) THEN
[3541]	548	! Convert the initial date of Toga-Coare to Julian day
	549	call ymds2ju &
	550	& (year_ini_toga,mth_ini_toga,day_ini_toga,heure,day_ju_ini_toga)
	551
[5084]	552	ELSEIF (forcing_type .eq.4) THEN
[3541]	553	! Convert the initial date of TWPICE to Julian day
	554	call ymds2ju &
	555	& (year_ini_twpi,mth_ini_twpi,day_ini_twpi,heure_ini_twpi &
	556	& ,day_ju_ini_twpi)
[5084]	557	ELSEIF (forcing_type .eq.6) THEN
[3541]	558	! Convert the initial date of AMMA to Julian day
	559	call ymds2ju &
	560	& (year_ini_amma,mth_ini_amma,day_ini_amma,heure_ini_amma &
	561	& ,day_ju_ini_amma)
[5084]	562	ELSEIF (forcing_type .eq.7) THEN
[3541]	563	! Convert the initial date of DICE to Julian day
	564	call ymds2ju &
	565	& (year_ini_dice,mth_ini_dice,day_ini_dice,heure_ini_dice &
	566	& ,day_ju_ini_dice)
[5084]	567	ELSEIF (forcing_type .eq.8 ) THEN
[3541]	568	! Convert the initial date of GABLS4 to Julian day
	569	call ymds2ju &
	570	& (year_ini_gabls4,mth_ini_gabls4,day_ini_gabls4,heure_ini_gabls4 &
	571	& ,day_ju_ini_gabls4)
[5084]	572	ELSEIF (forcing_type .gt.100) THEN
[3541]	573	! Convert the initial date to Julian day
	574	day_ini_cas=day_deb
	575	print*,'time case',year_ini_cas,mth_ini_cas,day_ini_cas
	576	call ymds2ju &
	577	& (year_ini_cas,mth_ini_cas,day_ini_cas,heure_ini_cas*3600 &
	578	& ,day_ju_ini_cas)
	579	print*,'time case 2',day_ini_cas,day_ju_ini_cas
[5084]	580	ELSEIF (forcing_type .eq.59) THEN
[3541]	581	! Convert the initial date of Sandu case to Julian day
	582	call ymds2ju &
	583	& (year_ini_sandu,mth_ini_sandu,day_ini_sandu, &
	584	& time_ini*3600.,day_ju_ini_sandu)
	585
[5084]	586	ELSEIF (forcing_type .eq.60) THEN
[3541]	587	! Convert the initial date of Astex case to Julian day
	588	call ymds2ju &
	589	& (year_ini_astex,mth_ini_astex,day_ini_astex, &
	590	& time_ini*3600.,day_ju_ini_astex)
	591
[5084]	592	ELSEIF (forcing_type .eq.61) THEN
[3541]	593	! Convert the initial date of Arm_cu case to Julian day
	594	call ymds2ju &
	595	& (year_ini_armcu,mth_ini_armcu,day_ini_armcu,heure_ini_armcu &
	596	& ,day_ju_ini_armcu)
	597	ENDIF
	598
[5084]	599	IF (forcing_type .gt.100) THEN
[3541]	600	daytime = day + heure_ini_cas/24. ! 1st day and initial time of the simulation
	601	ELSE
	602	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
	603	ENDIF
	604	! Print out the actual date of the beginning of the simulation :
	605	call ju2ymds(daytime,year_print, month_print,day_print,sec_print)
	606	print *,' Time of beginning : ', &
	607	& year_print, month_print, day_print, sec_print
	608
	609	!---------------------------------------------------------------------
	610	! Initialization of dimensions, geometry and initial state
	611	!---------------------------------------------------------------------
	612	! call init_phys_lmdz(1,1,llm,1,(/1/)) ! job now done via iniphysiq
	613	! but we still need to initialize dimphy module (klon,klev,etc.) here.
	614	call init_dimphy1D(1,llm)
	615	call suphel
[4325]	616	call init_infotrac
[3541]	617
	618	if (nqtot>nqmx) STOP 'Augmenter nqmx dans lmdz1d.F'
	619	allocate(q(llm,nqtot)) ; q(:,:)=0.
	620	allocate(dq(llm,nqtot))
	621	allocate(dq_dyn(llm,nqtot))
	622	allocate(d_q_adv(llm,nqtot))
	623	allocate(d_q_nudge(llm,nqtot))
	624	! allocate(d_th_adv(llm))
	625
	626	q(:,:) = 0.
	627	dq(:,:) = 0.
	628	dq_dyn(:,:) = 0.
	629	d_q_adv(:,:) = 0.
	630	d_q_nudge(:,:) = 0.
	631
	632	!
	633	! No ozone climatology need be read in this pre-initialization
	634	! (phys_state_var_init is called again in physiq)
	635	read_climoz = 0
[3781]	636	nsw=6 ! EV et LF: sinon, falb_dir et falb_dif ne peuvent etre alloues
	637
	638
[3541]	639	call phys_state_var_init(read_climoz)
	640
[5084]	641	if (ngrid.ne.klon) then
[3541]	642	print*,'stop in inifis'
	643	print*,'Probleme de dimensions :'
	644	print*,'ngrid = ',ngrid
	645	print*,'klon = ',klon
	646	stop
	647	endif
	648	!!!=====================================================================
	649	!!! Feedback forcing values for Gateaux differentiation (al1)
	650	!!!=====================================================================
	651	!!! Surface Planck forcing bracketing call radiation
	652	!! surf_Planck = 0.
	653	!! surf_Conv = 0.
	654	!! write(,) 'Gateaux-dif Planck,Conv:',surf_Planck,surf_Conv
	655	!!! a mettre dans le lmdz1d.def ou autre
	656	!!
	657	!!
	658	qsol = qsolinp
	659	qsurf = fq_sat(tsurf,psurf/100.)
[3890]	660	beta_surf = 1.
[3888]	661	beta_aridity(:,:) = beta_surf
[3541]	662	day1= day_ini
	663	time=daytime-day
	664	ts_toga(1)=tsurf ! needed by read_tsurf1d.F
	665	rho(1)=psurf/(rdtsurf(1.+(rv/rd-1.)*qsurf))
	666
	667	!
	668	!! mpl et jyg le 22/08/2012 :
	669	!! pour que les cas a flux de surface imposes marchent
	670	IF(.NOT.ok_flux_surf.or.max(abs(wtsurf),abs(wqsurf))>0.) THEN
	671	fsens=-wtsurfrcpdrho(1)
	672	flat=-wqsurfrlvttrho(1)
	673	print *,'Flux: ok_flux wtsurf wqsurf',ok_flux_surf,wtsurf,wqsurf
	674	ENDIF
	675	print*,'Flux sol ',fsens,flat
	676	!! ok_flux_surf=.false.
	677	!! fsens=-wtsurfrcpdrho(1)
	678	!! flat=-wqsurfrlvttrho(1)
	679	!!!!
	680
	681	! Vertical discretization and pressure levels at half and mid levels:
	682
	683	pa = 5e4
	684	!! preff= 1.01325e5
	685	preff = psurf
	686	IF (ok_old_disvert) THEN
	687	call disvert0(pa,preff,ap,bp,dpres,presnivs,nivsigs,nivsig)
	688	print *,'On utilise disvert0'
	689	aps(1:llm)=0.5*(ap(1:llm)+ap(2:llm+1))
	690	bps(1:llm)=0.5*(bp(1:llm)+bp(2:llm+1))
	691	scaleheight=8.
	692	pseudoalt(1:llm)=-scaleheight*log(presnivs(1:llm)/preff)
	693	ELSE
	694	call disvert()
	695	print *,'On utilise disvert'
	696	! Nouvelle version disvert permettant d imposer ap,bp (modif L.Guez) MPL 18092012
	697	! Dans ce cas, on lit ap,bp dans le fichier hybrid.txt
	698	ENDIF
	699
	700	sig_s=presnivs/preff
	701	plev =ap+bp*psurf
	702	play = 0.5*(plev(1:llm)+plev(2:llm+1))
	703	zlay=-rd300.log(play/psurf)/rg ! moved after reading profiles
	704
[5084]	705	IF (forcing_type .eq. 59) THEN
[3541]	706	! pour forcing_sandu, on cherche l'indice le plus proche de 700hpa#3000m
	707	write(,) '***********************'
	708	do l = 1, llm
	709	write(,) 'l,play(l),presnivs(l): ',l,play(l),presnivs(l)
[5084]	710	if (trouve_700 .and. play(l).le.70000) then
[3541]	711	llm700=l
	712	print *,'llm700,play=',llm700,play(l)/100.
	713	trouve_700= .false.
	714	endif
	715	enddo
	716	write(,) '***********************'
	717	ENDIF
	718
	719	!
	720	!=====================================================================
	721	! EVENTUALLY, READ FORCING DATA :
	722	!=====================================================================
	723
[4593]	724	INCLUDE "old_1D_read_forc_cases.h"
[3541]	725
	726	if (forcing_GCM2SCM) then
	727	write (,) 'forcing_GCM2SCM not yet implemented'
	728	stop 'in initialization'
	729	endif ! forcing_GCM2SCM
	730
	731	print*,'mxcalc=',mxcalc
	732	! print*,'zlay=',zlay(mxcalc)
	733	print*,'play=',play(mxcalc)
	734
	735	!Al1 pour SST forced, appell?? depuis ocean_forced_noice
[3780]	736	! EV tg instead of ts_cur
	737
	738	tg = tsurf ! SST used in read_tsurf1d
[3541]	739	!=====================================================================
	740	! Initialisation de la physique :
	741	!=====================================================================
	742
	743	! Rq: conf_phys.F90 lit tous les flags de physiq.def; conf_phys appele depuis physiq.F
	744	!
	745	! day_step, iphysiq lus dans gcm.def ci-dessus
	746	! timestep: calcule ci-dessous from rday et day_step
	747	! ngrid=1
	748	! llm: defini dans .../modipsl/modeles/LMDZ4/libf/grid/dimension
	749	! rday: defini dans suphel.F (86400.)
	750	! day_ini: lu dans run.def (dayref)
	751	! rlat_rad,rlon-rad: transformes en radian de rlat,rlon lus dans lmdz1d.def (en degres)
	752	! airefi,zcufi,zcvfi initialises au debut de ce programme
	753	! rday,ra,rg,rd,rcpd declares dans YOMCST.h et calcules dans suphel.F
	754	day_step = float(nsplit_phys)*day_step/float(iphysiq)
	755	write (,) 'Time step divided by nsplit_phys (=',nsplit_phys,')'
	756	timestep =rday/day_step
	757	dtime_frcg = timestep
	758	!
	759	zcufi=airefi
	760	zcvfi=airefi
	761	!
	762	rlat_rad(1)=xlat*rpi/180.
	763	rlon_rad(1)=xlon*rpi/180.
	764
	765	! iniphysiq will call iniaqua who needs year_len from phys_cal_mod
	766	year_len_phys_cal_mod=year_len
	767
	768	! Ehouarn: iniphysiq requires arrays related to (3D) dynamics grid,
	769	! e.g. for cell boundaries, which are meaningless in 1D; so pad these
	770	! with '0.' when necessary
	771	call iniphysiq(iim,jjm,llm, &
	772	1,comm_lmdz, &
	773	rday,day_ini,timestep, &
	774	(/rlat_rad(1),0./),(/0./), &
	775	(/0.,0./),(/rlon_rad(1),0./), &
	776	(/ (/airefi,0./),(/0.,0./) /), &
	777	(/zcufi,0.,0.,0./), &
	778	(/zcvfi,0./), &
	779	ra,rg,rd,rcpd,1)
	780	print*,'apres iniphysiq'
	781
	782	! 2 PARAMETRES QUI DEVRAIENT ETRE LUS DANS run.def MAIS NE LE SONT PAS ICI:
	783	co2_ppm= 330.0
	784	solaire=1370.0
	785
	786	! Ecriture du startphy avant le premier appel a la physique.
	787	! On le met juste avant pour avoir acces a tous les champs
	788
	789	if (ok_writedem) then
	790
	791	!--------------------------------------------------------------------------
	792	! pbl_surface_init (called here) and pbl_surface_final (called by phyredem)
	793	! need : qsol fder snow qsurf evap rugos agesno ftsoil
	794	!--------------------------------------------------------------------------
	795
	796	type_ocean = "force"
	797	run_off_lic_0(1) = restart_runoff
	798	call fonte_neige_init(run_off_lic_0)
	799
	800	fder=0.
[3888]	801	snsrf(1,:)=snowmass ! masse de neige des sous surface
[3780]	802	print *, 'snsrf', snsrf
[3541]	803	qsurfsrf(1,:)=qsurf ! humidite de l'air des sous surface
	804	fevap=0.
	805	z0m(1,:)=rugos ! couverture de neige des sous surface
	806	z0h(1,:)=rugosh ! couverture de neige des sous surface
	807	agesno = xagesno
	808	tsoil(:,:,:)=tsurf
	809	!------ AMMA 2e run avec modele sol et rayonnement actif (MPL 23052012)
	810	! tsoil(1,1,1)=299.18
	811	! tsoil(1,2,1)=300.08
	812	! tsoil(1,3,1)=301.88
	813	! tsoil(1,4,1)=305.48
	814	! tsoil(1,5,1)=308.00
	815	! tsoil(1,6,1)=308.00
	816	! tsoil(1,7,1)=308.00
	817	! tsoil(1,8,1)=308.00
	818	! tsoil(1,9,1)=308.00
	819	! tsoil(1,10,1)=308.00
	820	! tsoil(1,11,1)=308.00
	821	!-----------------------------------------------------------------------
	822	call pbl_surface_init(fder, snsrf, qsurfsrf, tsoil)
	823
	824	!------------------ prepare limit conditions for limit.nc -----------------
	825	!-- Ocean force
	826
	827	print*,'avant phyredem'
	828	pctsrf(1,:)=0.
[5084]	829	if (nat_surf.eq.0.) then
[3541]	830	pctsrf(1,is_oce)=1.
	831	pctsrf(1,is_ter)=0.
	832	pctsrf(1,is_lic)=0.
	833	pctsrf(1,is_sic)=0.
[5084]	834	else if (nat_surf .eq. 1) then
[3541]	835	pctsrf(1,is_oce)=0.
	836	pctsrf(1,is_ter)=1.
	837	pctsrf(1,is_lic)=0.
	838	pctsrf(1,is_sic)=0.
[5084]	839	else if (nat_surf .eq. 2) then
[3541]	840	pctsrf(1,is_oce)=0.
	841	pctsrf(1,is_ter)=0.
	842	pctsrf(1,is_lic)=1.
	843	pctsrf(1,is_sic)=0.
[5084]	844	else if (nat_surf .eq. 3) then
[3541]	845	pctsrf(1,is_oce)=0.
	846	pctsrf(1,is_ter)=0.
	847	pctsrf(1,is_lic)=0.
	848	pctsrf(1,is_sic)=1.
	849
	850	end if
	851
	852	print*,'nat_surf,pctsrf(1,is_oce),pctsrf(1,is_ter)',nat_surf &
	853	& ,pctsrf(1,is_oce),pctsrf(1,is_ter)
	854
	855	zmasq=pctsrf(1,is_ter)+pctsrf(1,is_lic)
	856	zpic = zpicinp
	857	ftsol=tsurf
	858	falb_dir=albedo
	859	falb_dif=albedo
	860	rugoro=rugos
	861	t_ancien(1,:)=temp(:)
	862	q_ancien(1,:)=q(:,1)
	863	ql_ancien = 0.
	864	qs_ancien = 0.
	865	prlw_ancien = 0.
	866	prsw_ancien = 0.
	867	prw_ancien = 0.
[5213]	868	IF ( ok_bs ) THEN
	869	qbs_ancien = 0.
	870	prbsw_ancien = 0.
	871	ENDIF
[5212]	872	IF ( ok_ice_supersat ) THEN
	873	cf_ancien = 0.
	874	rvc_ancien = 0.
	875	ENDIF
[3541]	876	!jyg<
	877	!! pbl_tke(:,:,:)=1.e-8
	878	pbl_tke(:,:,:)=0.
	879	pbl_tke(:,2,:)=1.e-2
	880	PRINT *, ' pbl_tke dans lmdz1d '
[5084]	881	if (prt_level .ge. 5) then
[3541]	882	DO nsrf = 1,4
	883	PRINT *,'pbl_tke(1,:,',nsrf,') ',pbl_tke(1,:,nsrf)
	884	ENDDO
	885	end if
	886
	887	!>jyg
	888
	889	rain_fall=0.
	890	snow_fall=0.
	891	solsw=0.
[3956]	892	solswfdiff=0.
[3541]	893	sollw=0.
	894	sollwdown=rsigmatsurf*4
	895	radsol=0.
	896	rnebcon=0.
	897	ratqs=0.
	898	clwcon=0.
	899	zmax0 = 0.
[4104]	900	zmea=zsurf
[3541]	901	zstd=0.
	902	zsig=0.
	903	zgam=0.
	904	zval=0.
	905	zthe=0.
	906	sig1=0.
	907	w01=0.
[3956]	908	!
[3541]	909	wake_deltaq = 0.
	910	wake_deltat = 0.
	911	wake_delta_pbl_TKE(:,:,:) = 0.
	912	delta_tsurf = 0.
	913	wake_fip = 0.
	914	wake_pe = 0.
	915	wake_s = 0.
[4744]	916	awake_s = 0.
[3541]	917	wake_dens = 0.
[3956]	918	awake_dens = 0.
	919	cv_gen = 0.
	920	wake_cstar = 0.
[3541]	921	ale_bl = 0.
	922	ale_bl_trig = 0.
	923	alp_bl = 0.
	924	IF (ALLOCATED(du_gwd_rando)) du_gwd_rando = 0.
	925	IF (ALLOCATED(du_gwd_front)) du_gwd_front = 0.
	926	entr_therm = 0.
	927	detr_therm = 0.
	928	f0 = 0.
	929	fm_therm = 0.
	930	u_ancien(1,:)=u(:)
	931	v_ancien(1,:)=v(:)
[3575]	932
[3780]	933	u10m=0.
	934	v10m=0.
	935	ale_wake=0.
	936	ale_bl_stat=0.
[3541]	937
	938	!------------------------------------------------------------------------
	939	! Make file containing restart for the physics (startphy.nc)
	940	!
	941	! NB: List of the variables to be written by phyredem (via put_field):
	942	! rlon,rlat,zmasq,pctsrf(:,is_ter),pctsrf(:,is_lic),pctsrf(:,is_oce)
	943	! pctsrf(:,is_sic),ftsol(:,nsrf),tsoil(:,isoil,nsrf),qsurf(:,nsrf)
	944	! qsol,falb_dir(:,nsrf),falb_dif(:,nsrf),evap(:,nsrf),snow(:,nsrf)
[3956]	945	! radsol,solsw,solswfdiff,sollw, sollwdown,fder,rain_fall,snow_fall,frugs(:,nsrf)
[3541]	946	! agesno(:,nsrf),zmea,zstd,zsig,zgam,zthe,zpic,zval,rugoro
	947	! t_ancien,q_ancien,,frugs(:,is_oce),clwcon(:,1),rnebcon(:,1),ratqs(:,1)
	948	! run_off_lic_0,pbl_tke(:,1:klev,nsrf), zmax0,f0,sig1,w01
[4744]	949	! wake_deltat,wake_deltaq,wake_s,awake_s,wake_dens,awake_dens,cv_gen,wake_cstar,
[3541]	950	! wake_fip,wake_delta_pbl_tke(:,1:klev,nsrf)
	951	!
	952	! NB2: The content of the startphy.nc file depends on some flags defined in
	953	! the ".def" files. However, since conf_phys is not called in lmdz1d.F90, these flags have
	954	! to be set at some arbitratry convenient values.
	955	!------------------------------------------------------------------------
	956	!Al1 =============== restart option ==========================
[4553]	957	iflag_physiq=0
[4537]	958	call getin('iflag_physiq',iflag_physiq)
	959
[3541]	960	if (.not.restart) then
	961	iflag_pbl = 5
	962	call phyredem ("startphy.nc")
	963	else
	964	! (desallocations)
	965	print*,'callin surf final'
	966	call pbl_surface_final( fder, snsrf, qsurfsrf, tsoil)
	967	print*,'after surf final'
	968	CALL fonte_neige_final(run_off_lic_0)
	969	endif
	970
	971	ok_writedem=.false.
	972	print*,'apres phyredem'
	973
	974	endif ! ok_writedem
	975
	976	!------------------------------------------------------------------------
	977	! Make file containing boundary conditions (limit.nc) Al1->restartdyn*
	978	! --------------------------------------------------
	979	! NB: List of the variables to be written in limit.nc
	980	! (by writelim.F, subroutine of 1DUTILS.h):
	981	! phy_nat,phy_alb,phy_sst,phy_bil,phy_rug,phy_ice,
	982	! phy_fter,phy_foce,phy_flic,phy_fsic)
	983	!------------------------------------------------------------------------
	984	do i=1,year_len
	985	phy_nat(i) = nat_surf
	986	phy_alb(i) = albedo
	987	phy_sst(i) = tsurf ! read_tsurf1d will be used instead
	988	phy_rug(i) = rugos
	989	phy_fter(i) = pctsrf(1,is_ter)
	990	phy_foce(i) = pctsrf(1,is_oce)
	991	phy_fsic(i) = pctsrf(1,is_sic)
	992	phy_flic(i) = pctsrf(1,is_lic)
	993	enddo
	994
	995	! fabrication de limit.nc
	996	call writelim (1,phy_nat,phy_alb,phy_sst,phy_bil,phy_rug, &
	997	& phy_ice,phy_fter,phy_foce,phy_flic,phy_fsic)
	998
	999
	1000	call phys_state_var_end
	1001	!Al1
	1002	if (restart) then
	1003	print*,'call to restart dyn 1d'
	1004	Call dyn1deta0("start1dyn.nc",plev,play,phi,phis,presnivs, &
	1005	& u,v,temp,q,omega2)
	1006
	1007	print*,'fnday,annee_ref,day_ref,day_ini', &
	1008	& fnday,annee_ref,day_ref,day_ini
	1009	!** call ymds2ju(annee_ref,mois,day_ini,heure,day)
	1010	day = day_ini
	1011	day_end = day_ini + nday
	1012	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
	1013
	1014	! Print out the actual date of the beginning of the simulation :
	1015	call ju2ymds(daytime, an, mois, jour, heure)
	1016	print *,' Time of beginning : y m d h',an, mois,jour,heure/3600.
	1017
	1018	day = int(daytime)
	1019	time=daytime-day
	1020
	1021	print,'*** intialised fields from restart1dyn *****'
	1022	print*,'plev,play,phi,phis,presnivs,u,v,temp,q,omega2'
	1023	print*,'temp(1),q(1,1),u(1),v(1),plev(1),phis :'
	1024	print*,temp(1),q(1,1),u(1),v(1),plev(1),phis
	1025	! raz for safety
	1026	do l=1,llm
	1027	dq_dyn(l,1) = 0.
	1028	enddo
	1029	endif
	1030	!Al1 ================ end restart =================================
[5084]	1031	IF (ecrit_slab_oc.eq.1) then
[3541]	1032	open(97,file='div_slab.dat',STATUS='UNKNOWN')
[5084]	1033	elseif (ecrit_slab_oc.eq.0) then
[3541]	1034	open(97,file='div_slab.dat',STATUS='OLD')
	1035	endif
	1036	!
	1037	!---------------------------------------------------------------------
	1038	! Initialize target profile for RHT nudging if needed
	1039	!---------------------------------------------------------------------
	1040	if (nudge(inudge_RHT)) then
	1041	call nudge_RHT_init(plev,play,temp,q(:,1),t_targ,rh_targ)
	1042	endif
	1043	if (nudge(inudge_UV)) then
	1044	call nudge_UV_init(plev,play,u,v,u_targ,v_targ)
	1045	endif
	1046	!
	1047	!=====================================================================
[5260]	1048	IF (CPPKEY_OUTPUTPHYSSCM) THEN
[3977]	1049	CALL iophys_ini(timestep)
[5260]	1050	END IF
[3541]	1051	! START OF THE TEMPORAL LOOP :
	1052	!=====================================================================
	1053
	1054	it_end = nint(fnday*day_step)
	1055	!test JLD it_end = 10
[5084]	1056	do while(it.le.it_end)
[3541]	1057
[5084]	1058	if (prt_level.ge.1) then
[3541]	1059	print*,'XXXXXXXXXXXXXXXXXXX ITAP,day,time=', &
	1060	& it,day,time,it_end,day_step
	1061	print*,'PAS DE TEMPS ',timestep
	1062	endif
	1063	!Al1 demande de restartphy.nc
[5084]	1064	if (it.eq.it_end) lastcall=.True.
[3541]	1065
	1066	!---------------------------------------------------------------------
[4105]	1067	! Geopotential :
	1068	!---------------------------------------------------------------------
	1069
	1070	phi(1)=RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
	1071	do l = 1, llm-1
	1072	phi(l+1)=phi(l)+RD(temp(l)+temp(l+1)) &
	1073	& (play(l)-play(l+1))/(play(l)+play(l+1))
	1074	enddo
	1075
	1076	!---------------------------------------------------------------------
[3541]	1077	! Interpolation of forcings in time and onto model levels
	1078	!---------------------------------------------------------------------
	1079
[4593]	1080	INCLUDE "old_1D_interp_cases.h"
[3541]	1081
	1082	if (forcing_GCM2SCM) then
	1083	write (,) 'forcing_GCM2SCM not yet implemented'
	1084	stop 'in time loop'
	1085	endif ! forcing_GCM2SCM
	1086
[4105]	1087	!!!!---------------------------------------------------------------------
	1088	!!!! Geopotential :
	1089	!!!!---------------------------------------------------------------------
	1090	!!!
	1091	!!! phi(1)=RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
	1092	!!! do l = 1, llm-1
	1093	!!! phi(l+1)=phi(l)+RD(temp(l)+temp(l+1)) &
	1094	!!! & (play(l)-play(l+1))/(play(l)+play(l+1))
	1095	!!! enddo
[3541]	1096
	1097	!---------------------------------------------------------------------
	1098	! Listing output for debug prt_level>=1
	1099	!---------------------------------------------------------------------
	1100	if (prt_level>=1) then
	1101	print *,' avant physiq : -------- day time ',day,time
	1102	write(,) 'firstcall,lastcall,phis', &
	1103	& firstcall,lastcall,phis
	1104	end if
	1105	if (prt_level>=5) then
	1106	write(*,'(a10,2a4,4a13)') 'BEFOR1 IT=','it','l', &
	1107	& 'presniv','plev','play','phi'
	1108	write(*,'(a10,2i4,4f13.2)') ('BEFOR1 IT= ',it,l, &
	1109	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
	1110	write(*,'(a11,2a4,a11,6a8)') 'BEFOR2','it','l', &
	1111	& 'presniv','u','v','temp','q1','q2','omega2'
	1112	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('BEFOR2 IT= ',it,l, &
	1113	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
	1114	endif
	1115
	1116	!---------------------------------------------------------------------
	1117	! Call physiq :
	1118	!---------------------------------------------------------------------
	1119	call physiq(ngrid,llm, &
	1120	firstcall,lastcall,timestep, &
	1121	plev,play,phi,phis,presnivs, &
	1122	u,v, rot, temp,q,omega2, &
	1123	du_phys,dv_phys,dt_phys,dq,dpsrf)
	1124	firstcall=.false.
	1125
	1126	!---------------------------------------------------------------------
	1127	! Listing output for debug
	1128	!---------------------------------------------------------------------
	1129	if (prt_level>=5) then
	1130	write(*,'(a11,2a4,4a13)') 'AFTER1 IT=','it','l', &
	1131	& 'presniv','plev','play','phi'
	1132	write(*,'(a11,2i4,4f13.2)') ('AFTER1 it= ',it,l, &
	1133	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
	1134	write(*,'(a11,2a4,a11,6a8)') 'AFTER2','it','l', &
	1135	& 'presniv','u','v','temp','q1','q2','omega2'
	1136	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('AFTER2 it= ',it,l, &
	1137	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
	1138	write(*,'(a11,2a4,a11,5a8)') 'AFTER3','it','l', &
	1139	& 'presniv','du_phys','dv_phys','dt_phys','dq1','dq2'
	1140	write(*,'(a11,2i4,f11.2,5f8.2)') ('AFTER3 it= ',it,l, &
	1141	& presnivs(l),86400du_phys(l),86400dv_phys(l), &
	1142	& 86400dt_phys(l),86400dq(l,1),dq(l,2),l=1,llm)
	1143	write(,) 'dpsrf',dpsrf
	1144	endif
	1145	!---------------------------------------------------------------------
	1146	! Add physical tendencies :
	1147	!---------------------------------------------------------------------
	1148
	1149	fcoriolis=2.sin(rpixlat/180.)*romega
	1150	if (forcing_radconv .or. forcing_fire) then
	1151	fcoriolis=0.0
	1152	dt_cooling=0.0
	1153	d_t_adv=0.0
	1154	d_q_adv=0.0
	1155	endif
	1156	! print*, 'calcul de fcoriolis ', fcoriolis
	1157
	1158	if (forcing_toga .or. forcing_GCSSold .or. forcing_twpice &
[5084]	1159	& .or.forcing_amma .or. forcing_type.eq.101) then
[3541]	1160	fcoriolis=0.0 ; ug=0. ; vg=0.
	1161	endif
	1162
	1163	if(forcing_rico) then
	1164	dt_cooling=0.
	1165	endif
	1166
	1167	!CRio:Attention modif sp??cifique cas de Caroline
	1168	if (forcing_type==-1) then
	1169	fcoriolis=0.
	1170	!Nudging
	1171
	1172	!on calcule dt_cooling
	1173	do l=1,llm
[5084]	1174	if (play(l).ge.20000.) then
[3541]	1175	dt_cooling(l)=-1.5/86400.
[5084]	1176	elseif ((play(l).ge.10000.).and.((play(l).lt.20000.))) then
[3541]	1177	dt_cooling(l)=-1.5/86400.(play(l)-10000.)/(10000.)-1./86400.(20000.-play(l))/10000.*(temp(l)-200.)
	1178	else
	1179	dt_cooling(l)=-1.*(temp(l)-200.)/86400.
	1180	endif
	1181	enddo
	1182
	1183	endif
	1184	!RC
	1185	if (forcing_sandu) then
	1186	ug(1:llm)=u_mod(1:llm)
	1187	vg(1:llm)=v_mod(1:llm)
	1188	endif
	1189
	1190	IF (prt_level >= 5) print*, 'fcoriolis, xlat,mxcalc ', &
	1191	fcoriolis, xlat,mxcalc
	1192
	1193	! print *,'u-ug=',u-ug
	1194
	1195	!!!!!!!!!!!!!!!!!!!!!!!!
	1196	! Geostrophic wind
	1197	! Le calcul ci dessous est insuffisamment precis
	1198	! du_age(1:mxcalc)=fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
	1199	! dv_age(1:mxcalc)=-fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
	1200	!!!!!!!!!!!!!!!!!!!!!!!!
	1201	sfdt = sin(0.5fcoriolistimestep)
	1202	cfdt = cos(0.5fcoriolistimestep)
	1203	! print *,'fcoriolis,sfdt,cfdt,timestep',fcoriolis,sfdt,cfdt,timestep
	1204	!
	1205	du_age(1:mxcalc)= -2.sfdt/timestep &
	1206	& (sfdt*(u(1:mxcalc)-ug(1:mxcalc)) - &
	1207	& cfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
	1208	!! : fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
	1209	!
	1210	dv_age(1:mxcalc)= -2.sfdt/timestep &
	1211	& (cfdt*(u(1:mxcalc)-ug(1:mxcalc)) + &
	1212	& sfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
	1213	!! : -fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
	1214	!
	1215	!!!!!!!!!!!!!!!!!!!!!!!!
	1216	! Nudging
	1217	!!!!!!!!!!!!!!!!!!!!!!!!
	1218	d_t_nudge(:) = 0.
	1219	d_q_nudge(:,:) = 0.
	1220	d_u_nudge(:) = 0.
	1221	d_v_nudge(:) = 0.
	1222	if (nudge(inudge_RHT)) then
	1223	call nudge_RHT(timestep,plev,play,t_targ,rh_targ,temp,q(:,1), &
	1224	& d_t_nudge,d_q_nudge(:,1))
	1225	endif
	1226	if (nudge(inudge_UV)) then
	1227	call nudge_UV(timestep,plev,play,u_targ,v_targ,u,v, &
	1228	& d_u_nudge,d_v_nudge)
	1229	endif
	1230	!
	1231	if (forcing_fire) THEN
	1232
	1233	!let ww=if ( alt le 1100 ) then alt*-0.00001 else 0
	1234	!let wt=if ( alt le 1100 ) then min( -3.75e-5 , -7.5e-8*alt) else 0
	1235	!let wq=if ( alt le 1100 ) then max( 1.5e-8 , 3e-11*alt) else 0
	1236	d_t_adv=0.
	1237	d_q_adv=0.
	1238	teta=temp(pzero/play)*rkappa
	1239	d_t_adv=0.
	1240	d_q_adv=0.
	1241	do l=2,llm-1
	1242	if (zlay(l)<=1100) then
	1243	wwww=-0.00001*zlay(l)
	1244	d_t_adv(l)=-wwww(teta(l)-teta(l+1))/(zlay(l)-zlay(l+1)) /(pzero/play(l))*rkappa
	1245	d_q_adv(l,1:2)=-wwww*(q(l,1:2)-q(l+1,1:2))/(zlay(l)-zlay(l+1))
	1246	d_t_adv(l)=d_t_adv(l)+min(-3.75e-5 , -7.5e-8*zlay(l))
	1247	d_q_adv(l,1)=d_q_adv(l,1)+max( 1.5e-8 , 3e-11*zlay(l))
	1248	endif
	1249	enddo
	1250
	1251	endif
	1252
	1253	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1254	! call writefield_phy('dv_age' ,dv_age,llm)
	1255	! call writefield_phy('du_age' ,du_age,llm)
	1256	! call writefield_phy('du_phys' ,du_phys,llm)
	1257	! call writefield_phy('u_tend' ,u,llm)
	1258	! call writefield_phy('u_g' ,ug,llm)
	1259	!
	1260	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1261	!! Increment state variables
	1262	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1263	IF (flag_inhib_forcing == 0) then ! if tendency of forcings should be added
	1264
	1265	! pour les cas sandu et astex, on reclacule u,v,q,temp et teta dans 1D_nudge_sandu_astex.h
	1266	! au dessus de 700hpa, on relaxe vers les profils initiaux
	1267	if (forcing_sandu .OR. forcing_astex) then
[4593]	1268	INCLUDE "1D_nudge_sandu_astex.h"
[3541]	1269	else
	1270	u(1:mxcalc)=u(1:mxcalc) + timestep*( &
	1271	& du_phys(1:mxcalc) &
	1272	& +du_age(1:mxcalc)+du_adv(1:mxcalc) &
	1273	& +d_u_nudge(1:mxcalc) )
	1274	v(1:mxcalc)=v(1:mxcalc) + timestep*( &
	1275	& dv_phys(1:mxcalc) &
	1276	& +dv_age(1:mxcalc)+dv_adv(1:mxcalc) &
	1277	& +d_v_nudge(1:mxcalc) )
	1278	q(1:mxcalc,:)=q(1:mxcalc,:)+timestep*( &
	1279	& dq(1:mxcalc,:) &
	1280	& +d_q_adv(1:mxcalc,:) &
	1281	& +d_q_nudge(1:mxcalc,:) )
	1282
[5084]	1283	if (prt_level.ge.3) then
[3541]	1284	print *, &
	1285	& 'physiq-> temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1) ', &
	1286	& temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1)
	1287	print* ,'dv_phys=',dv_phys
	1288	print* ,'dv_age=',dv_age
	1289	print* ,'dv_adv=',dv_adv
	1290	print* ,'d_v_nudge=',d_v_nudge
	1291	print*, v
	1292	print*, vg
	1293	endif
	1294
	1295	temp(1:mxcalc)=temp(1:mxcalc)+timestep*( &
	1296	& dt_phys(1:mxcalc) &
	1297	& +d_t_adv(1:mxcalc) &
	1298	& +d_t_nudge(1:mxcalc) &
	1299	& +dt_cooling(1:mxcalc)) ! Taux de chauffage ou refroid.
	1300
[5260]	1301	IF (CPPKEY_OUTPUTPHYSSCM) THEN
[3594]	1302	CALL iophys_ecrit('d_t_adv',klev,'d_t_adv','m/s',d_t_adv)
	1303	CALL iophys_ecrit('d_t_nudge',klev,'d_t_nudge','m/s',d_t_nudge)
[5260]	1304	END IF
[3594]	1305
[3541]	1306	endif ! forcing_sandu or forcing_astex
	1307
	1308	teta=temp(pzero/play)*rkappa
	1309	!
	1310	!---------------------------------------------------------------------
	1311	! Nudge soil temperature if requested
	1312	!---------------------------------------------------------------------
	1313
	1314	IF (nudge_tsoil .AND. .NOT. lastcall) THEN
	1315	ftsoil(1,isoil_nudge,:) = ftsoil(1,isoil_nudge,:) &
	1316	& -timestep/tau_soil_nudge*(ftsoil(1,isoil_nudge,:)-Tsoil_nudge)
	1317	ENDIF
	1318
	1319	!---------------------------------------------------------------------
	1320	! Add large-scale tendencies (advection, etc) :
	1321	!---------------------------------------------------------------------
	1322
	1323	!cc nrlmd
	1324	!cc tmpvar=teta
	1325	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
	1326	!cc
	1327	!cc teta(1:mxcalc)=tmpvar(1:mxcalc)
	1328	!cc tmpvar(:)=q(:,1)
	1329	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
	1330	!cc q(1:mxcalc,1)=tmpvar(1:mxcalc)
	1331	!cc tmpvar(:)=q(:,2)
	1332	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
	1333	!cc q(1:mxcalc,2)=tmpvar(1:mxcalc)
	1334
	1335	END IF ! end if tendency of tendency should be added
	1336
	1337	!---------------------------------------------------------------------
	1338	! Air temperature :
	1339	!---------------------------------------------------------------------
	1340	if (lastcall) then
	1341	print*,'Pas de temps final ',it
	1342	call ju2ymds(daytime, an, mois, jour, heure)
	1343	print*,'a la date : a m j h',an, mois, jour ,heure/3600.
	1344	endif
	1345
	1346	! incremente day time
	1347	! print*,'daytime bef',daytime,1./day_step
	1348	daytime = daytime+1./day_step
	1349	!Al1dbg
	1350	day = int(daytime+0.1/day_step)
	1351	! time = max(daytime-day,0.0)
	1352	!Al1&jyg: correction de bug
	1353	!cc time = real(mod(it,day_step))/day_step
	1354	time = time_ini/24.+real(mod(it,day_step))/day_step
	1355	! print*,'daytime nxt time',daytime,time
	1356	it=it+1
	1357
	1358	enddo
	1359
	1360	!Al1
[5084]	1361	if (ecrit_slab_oc.ne.-1) close(97)
[3541]	1362
	1363	!Al1 Call to 1D equivalent of dynredem (an,mois,jour,heure ?)
	1364	! -------------------------------------
	1365	call dyn1dredem("restart1dyn.nc", &
	1366	& plev,play,phi,phis,presnivs, &
	1367	& u,v,temp,q,omega2)
	1368
	1369	CALL abort_gcm ('lmdz1d ','The End ',0)
	1370
	1371	END SUBROUTINE old_lmdz1d
	1372
[4593]	1373	INCLUDE "old_1DUTILS_read_interp.h"

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format