Context Navigation

old_lmdz1d.F90 @ 3977

Last change on this file since 3977 was 3977, checked in by fhourdin, 3 years ago
Modification des routines iotd* pour mieux gerer les coordonnees. Utile notamment pour la physique a 20 parametres.
File size: 50.4 KB

Line
1	!
2	! $Id: lmdz1d.F90 3540 2019-06-25 14:50:13Z fairhead $
3	!
4
5	SUBROUTINE old_lmdz1d
6
7	USE ioipsl, only: ju2ymds, ymds2ju, ioconf_calendar,getin
8	USE phys_state_var_mod, ONLY : phys_state_var_init, phys_state_var_end, &
9	clwcon, detr_therm, &
10	qsol, fevap, z0m, z0h, agesno, &
11	du_gwd_rando, du_gwd_front, entr_therm, f0, fm_therm, &
12	falb_dir, falb_dif, &
13	ftsol, beta_aridity, pbl_tke, pctsrf, radsol, rain_fall, snow_fall, ratqs, &
14	rnebcon, rugoro, sig1, w01, solaire_etat0, sollw, sollwdown, &
15	solsw, solswfdiff, t_ancien, q_ancien, u_ancien, v_ancien, &
16	wake_delta_pbl_TKE, delta_tsurf, wake_fip, wake_pe, &
17	wake_deltaq, wake_deltat, wake_s, wake_dens, &
18	awake_dens, cv_gen, wake_cstar, &
19	zgam, zmax0, zmea, zpic, zsig, &
20	zstd, zthe, zval, ale_bl, ale_bl_trig, alp_bl, ql_ancien, qs_ancien, &
21	prlw_ancien, prsw_ancien, prw_ancien, &
22	u10m,v10m,ale_wake,ale_bl_stat
23
24
25	USE dimphy
26	USE surface_data, only : type_ocean,ok_veget
27	USE pbl_surface_mod, only : ftsoil, pbl_surface_init, &
28	pbl_surface_final
29	USE fonte_neige_mod, only : fonte_neige_init, fonte_neige_final
30
31	USE infotrac ! new
32	USE control_mod
33	USE indice_sol_mod
34	USE phyaqua_mod
35	! USE mod_1D_cases_read
36	USE mod_1D_cases_read2
37	USE mod_1D_amma_read
38	USE print_control_mod, ONLY: lunout, prt_level
39	USE iniphysiq_mod, ONLY: iniphysiq
40	USE mod_const_mpi, ONLY: comm_lmdz
41	USE physiq_mod, ONLY: physiq
42	USE comvert_mod, ONLY: presnivs, ap, bp, dpres,nivsig, nivsigs, pa, &
43	preff, aps, bps, pseudoalt, scaleheight
44	USE temps_mod, ONLY: annee_ref, calend, day_end, day_ini, day_ref, &
45	itau_dyn, itau_phy, start_time, year_len
46	USE phys_cal_mod, ONLY : year_len_phys_cal_mod => year_len
47
48	implicit none
49	#include "dimensions.h"
50	#include "YOMCST.h"
51	!!#include "control.h"
52	#include "clesphys.h"
53	#include "dimsoil.h"
54	!#include "indicesol.h"
55
56	#include "compar1d.h"
57	#include "flux_arp.h"
58	#include "date_cas.h"
59	#include "tsoilnudge.h"
60	#include "fcg_gcssold.h"
61	!!!#include "fbforcing.h"
62	#include "compbl.h"
63
64	!=====================================================================
65	! DECLARATIONS
66	!=====================================================================
67
68	!---------------------------------------------------------------------
69	! Externals
70	!---------------------------------------------------------------------
71	external fq_sat
72	real fq_sat
73
74	!---------------------------------------------------------------------
75	! Arguments d' initialisations de la physique (USER DEFINE)
76	!---------------------------------------------------------------------
77
78	integer, parameter :: ngrid=1
79	real :: zcufi = 1.
80	real :: zcvfi = 1.
81
82	!- real :: nat_surf
83	!- logical :: ok_flux_surf
84	!- real :: fsens
85	!- real :: flat
86	!- real :: tsurf
87	!- real :: rugos
88	!- real :: qsol(1:2)
89	!- real :: qsurf
90	!- real :: psurf
91	!- real :: zsurf
92	!- real :: albedo
93	!-
94	!- real :: time = 0.
95	!- real :: time_ini
96	!- real :: xlat
97	!- real :: xlon
98	!- real :: wtsurf
99	!- real :: wqsurf
100	!- real :: restart_runoff
101	!- real :: xagesno
102	!- real :: qsolinp
103	!- real :: zpicinp
104	!-
105	real :: fnday
106	real :: day, daytime
107	real :: day1
108	real :: heure
109	integer :: jour
110	integer :: mois
111	integer :: an
112
113	!---------------------------------------------------------------------
114	! Declarations related to forcing and initial profiles
115	!---------------------------------------------------------------------
116
117	integer :: kmax = llm
118	integer llm700,nq1,nq2
119	INTEGER, PARAMETER :: nlev_max=1000, nqmx=1000
120	real timestep, frac
121	real height(nlev_max),tttprof(nlev_max),qtprof(nlev_max)
122	real uprof(nlev_max),vprof(nlev_max),e12prof(nlev_max)
123	real ugprof(nlev_max),vgprof(nlev_max),wfls(nlev_max)
124	real dqtdxls(nlev_max),dqtdyls(nlev_max)
125	real dqtdtls(nlev_max),thlpcar(nlev_max)
126	real qprof(nlev_max,nqmx)
127
128	! integer :: forcing_type
129	logical :: forcing_les = .false.
130	logical :: forcing_armcu = .false.
131	logical :: forcing_rico = .false.
132	logical :: forcing_radconv = .false.
133	logical :: forcing_toga = .false.
134	logical :: forcing_twpice = .false.
135	logical :: forcing_amma = .false.
136	logical :: forcing_dice = .false.
137	logical :: forcing_gabls4 = .false.
138
139	logical :: forcing_GCM2SCM = .false.
140	logical :: forcing_GCSSold = .false.
141	logical :: forcing_sandu = .false.
142	logical :: forcing_astex = .false.
143	logical :: forcing_fire = .false.
144	logical :: forcing_case = .false.
145	logical :: forcing_case2 = .false.
146	logical :: forcing_SCM = .false.
147	integer :: type_ts_forcing ! 0 = SST constant; 1 = SST read from a file
148	! (cf read_tsurf1d.F)
149
150	real wwww
151	!vertical advection computation
152	! real d_t_z(llm), d_q_z(llm)
153	! real d_t_dyn_z(llm), dq_dyn_z(llm)
154	! real zz(llm)
155	! real zfact
156
157	!flag forcings
158	logical :: nudge_wind=.true.
159	logical :: nudge_thermo=.false.
160	logical :: cptadvw=.true.
161	!=====================================================================
162	! DECLARATIONS FOR EACH CASE
163	!=====================================================================
164	!
165	#include "old_1D_decl_cases.h"
166	!
167	!---------------------------------------------------------------------
168	! Declarations related to nudging
169	!---------------------------------------------------------------------
170	integer :: nudge_max
171	parameter (nudge_max=9)
172	integer :: inudge_RHT=1
173	integer :: inudge_UV=2
174	logical :: nudge(nudge_max)
175	real :: t_targ(llm)
176	real :: rh_targ(llm)
177	real :: u_targ(llm)
178	real :: v_targ(llm)
179	!
180	!---------------------------------------------------------------------
181	! Declarations related to vertical discretization:
182	!---------------------------------------------------------------------
183	real :: pzero=1.e5
184	real :: play (llm),zlay (llm),sig_s(llm),plev(llm+1)
185	real :: playd(llm),zlayd(llm),ap_amma(llm+1),bp_amma(llm+1)
186
187	!---------------------------------------------------------------------
188	! Declarations related to variables
189	!---------------------------------------------------------------------
190
191	real :: phi(llm)
192	real :: teta(llm),tetal(llm),temp(llm),u(llm),v(llm),w(llm)
193	REAL rot(1, llm) ! relative vorticity, in s-1
194	real :: rlat_rad(1),rlon_rad(1)
195	real :: omega(llm+1),omega2(llm),rho(llm+1)
196	real :: ug(llm),vg(llm),fcoriolis
197	real :: sfdt, cfdt
198	real :: du_phys(llm),dv_phys(llm),dt_phys(llm)
199	real :: dt_dyn(llm)
200	real :: dt_cooling(llm),d_t_adv(llm),d_t_nudge(llm)
201	real :: d_u_nudge(llm),d_v_nudge(llm)
202	real :: du_adv(llm),dv_adv(llm)
203	real :: du_age(llm),dv_age(llm)
204	real :: alpha
205	real :: ttt
206
207	REAL, ALLOCATABLE, DIMENSION(:,:):: q
208	REAL, ALLOCATABLE, DIMENSION(:,:):: dq
209	REAL, ALLOCATABLE, DIMENSION(:,:):: dq_dyn
210	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_adv
211	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_nudge
212	! REAL, ALLOCATABLE, DIMENSION(:):: d_th_adv
213
214	!---------------------------------------------------------------------
215	! Initialization of surface variables
216	!---------------------------------------------------------------------
217	real :: run_off_lic_0(1)
218	real :: fder(1),snsrf(1,nbsrf),qsurfsrf(1,nbsrf)
219	real :: tsoil(1,nsoilmx,nbsrf)
220	! real :: agesno(1,nbsrf)
221
222	!---------------------------------------------------------------------
223	! Call to phyredem
224	!---------------------------------------------------------------------
225	logical :: ok_writedem =.true.
226	real :: sollw_in = 0.
227	real :: solsw_in = 0.
228
229	!---------------------------------------------------------------------
230	! Call to physiq
231	!---------------------------------------------------------------------
232	logical :: firstcall=.true.
233	logical :: lastcall=.false.
234	real :: phis(1) = 0.0
235	real :: dpsrf(1)
236
237	!---------------------------------------------------------------------
238	! Initializations of boundary conditions
239	!---------------------------------------------------------------------
240	real, allocatable :: phy_nat (:) ! 0=ocean libre,1=land,2=glacier,3=banquise
241	real, allocatable :: phy_alb (:) ! Albedo land only (old value condsurf_jyg=0.3)
242	real, allocatable :: phy_sst (:) ! SST (will not be used; cf read_tsurf1d.F)
243	real, allocatable :: phy_bil (:) ! Ne sert que pour les slab_ocean
244	real, allocatable :: phy_rug (:) ! Longueur rugosite utilisee sur land only
245	real, allocatable :: phy_ice (:) ! Fraction de glace
246	real, allocatable :: phy_fter(:) ! Fraction de terre
247	real, allocatable :: phy_foce(:) ! Fraction de ocean
248	real, allocatable :: phy_fsic(:) ! Fraction de glace
249	real, allocatable :: phy_flic(:) ! Fraction de glace
250
251	!---------------------------------------------------------------------
252	! Fichiers et d'autres variables
253	!---------------------------------------------------------------------
254	integer :: k,l,i,it=1,mxcalc
255	integer :: nsrf
256	integer jcode
257	INTEGER read_climoz
258	!
259	integer :: it_end ! iteration number of the last call
260	!Al1
261	integer ecrit_slab_oc !1=ecrit,-1=lit,0=no file
262	data ecrit_slab_oc/-1/
263	!
264	! if flag_inhib_forcing = 0, tendencies of forcing are added
265	! <> 0, tendencies of forcing are not added
266	INTEGER :: flag_inhib_forcing = 0
267
268	!=====================================================================
269	! INITIALIZATIONS
270	!=====================================================================
271	du_phys(:)=0.
272	dv_phys(:)=0.
273	dt_phys(:)=0.
274	dt_dyn(:)=0.
275	dt_cooling(:)=0.
276	d_t_adv(:)=0.
277	d_t_nudge(:)=0.
278	d_u_nudge(:)=0.
279	d_v_nudge(:)=0.
280	du_adv(:)=0.
281	dv_adv(:)=0.
282	du_age(:)=0.
283	dv_age(:)=0.
284
285	! Initialization of Common turb_forcing
286	dtime_frcg = 0.
287	Turb_fcg_gcssold=.false.
288	hthturb_gcssold = 0.
289	hqturb_gcssold = 0.
290
291
292
293
294	!---------------------------------------------------------------------
295	! OPTIONS OF THE 1D SIMULATION (lmdz1d.def => unicol.def)
296	!---------------------------------------------------------------------
297	!Al1
298	call conf_unicol
299	!Al1 moves this gcssold var from common fcg_gcssold to
300	Turb_fcg_gcssold = xTurb_fcg_gcssold
301	! --------------------------------------------------------------------
302	close(1)
303	!Al1
304	write(,) 'lmdz1d.def lu => unicol.def'
305
306	! forcing_type defines the way the SCM is forced:
307	!forcing_type = 0 ==> forcing_les = .true.
308	! initial profiles from file prof.inp.001
309	! no forcing by LS convergence ;
310	! surface temperature imposed ;
311	! radiative cooling may be imposed (iflag_radia=0 in physiq.def)
312	!forcing_type = 1 ==> forcing_radconv = .true.
313	! idem forcing_type = 0, but the imposed radiative cooling
314	! is set to 0 (hence, if iflag_radia=0 in physiq.def,
315	! then there is no radiative cooling at all)
316	!forcing_type = 2 ==> forcing_toga = .true.
317	! initial profiles from TOGA-COARE IFA files
318	! LS convergence and SST imposed from TOGA-COARE IFA files
319	!forcing_type = 3 ==> forcing_GCM2SCM = .true.
320	! initial profiles from the GCM output
321	! LS convergence imposed from the GCM output
322	!forcing_type = 4 ==> forcing_twpice = .true.
323	! initial profiles from TWP-ICE cdf file
324	! LS convergence, omega and SST imposed from TWP-ICE files
325	!forcing_type = 5 ==> forcing_rico = .true.
326	! initial profiles from RICO files
327	! LS convergence imposed from RICO files
328	!forcing_type = 6 ==> forcing_amma = .true.
329	! initial profiles from AMMA nc file
330	! LS convergence, omega and surface fluxes imposed from AMMA file
331	!forcing_type = 7 ==> forcing_dice = .true.
332	! initial profiles and large scale forcings in dice_driver.nc
333	! Different stages: soil model alone, atm. model alone
334	! then both models coupled
335	!forcing_type = 8 ==> forcing_gabls4 = .true.
336	! initial profiles and large scale forcings in gabls4_driver.nc
337	!forcing_type >= 100 ==> forcing_case = .true.
338	! initial profiles and large scale forcings in cas.nc
339	! LS convergence, omega and SST imposed from CINDY-DYNAMO files
340	! 101=cindynamo
341	! 102=bomex
342	!forcing_type >= 100 ==> forcing_case2 = .true.
343	! temporary flag while all the 1D cases are not whith the same cas.nc forcing file
344	! 103=arm_cu2 ie arm_cu with new forcing format
345	! 104=rico2 ie rico with new forcing format
346	!forcing_type = 40 ==> forcing_GCSSold = .true.
347	! initial profile from GCSS file
348	! LS convergence imposed from GCSS file
349	!forcing_type = 50 ==> forcing_fire = .true.
350	! forcing from fire.nc
351	!forcing_type = 59 ==> forcing_sandu = .true.
352	! initial profiles from sanduref file: see prof.inp.001
353	! SST varying with time and divergence constante: see ifa_sanduref.txt file
354	! Radiation has to be computed interactively
355	!forcing_type = 60 ==> forcing_astex = .true.
356	! initial profiles from file: see prof.inp.001
357	! SST,divergence,ug,vg,ufa,vfa varying with time : see ifa_astex.txt file
358	! Radiation has to be computed interactively
359	!forcing_type = 61 ==> forcing_armcu = .true.
360	! initial profiles from file: see prof.inp.001
361	! sensible and latent heat flux imposed: see ifa_arm_cu_1.txt
362	! large scale advective forcing & radiative tendencies applied below 1000m: see ifa_arm_cu_2.txt
363	! use geostrophic wind ug=10m/s vg=0m/s. Duration of the case 53100s
364	! Radiation to be switched off
365	!
366	if (forcing_type <=0) THEN
367	forcing_les = .true.
368	elseif (forcing_type .eq.1) THEN
369	forcing_radconv = .true.
370	elseif (forcing_type .eq.2) THEN
371	forcing_toga = .true.
372	elseif (forcing_type .eq.3) THEN
373	forcing_GCM2SCM = .true.
374	elseif (forcing_type .eq.4) THEN
375	forcing_twpice = .true.
376	elseif (forcing_type .eq.5) THEN
377	forcing_rico = .true.
378	elseif (forcing_type .eq.6) THEN
379	forcing_amma = .true.
380	elseif (forcing_type .eq.7) THEN
381	forcing_dice = .true.
382	elseif (forcing_type .eq.8) THEN
383	forcing_gabls4 = .true.
384	elseif (forcing_type .eq.101) THEN ! Cindynamo starts 1-10-2011 0h
385	forcing_case = .true.
386	year_ini_cas=2011
387	mth_ini_cas=10
388	day_deb=1
389	heure_ini_cas=0.
390	pdt_cas=3*3600. ! forcing frequency
391	elseif (forcing_type .eq.102) THEN ! Bomex starts 24-6-1969 0h
392	forcing_case = .true.
393	year_ini_cas=1969
394	mth_ini_cas=6
395	day_deb=24
396	heure_ini_cas=0.
397	pdt_cas=1800. ! forcing frequency
398	elseif (forcing_type .eq.103) THEN ! Arm_cu starts 21-6-1997 11h30
399	forcing_case2 = .true.
400	year_ini_cas=1997
401	mth_ini_cas=6
402	day_deb=21
403	heure_ini_cas=11.5
404	pdt_cas=1800. ! forcing frequency
405	elseif (forcing_type .eq.104) THEN ! rico starts 16-12-2004 0h
406	forcing_case2 = .true.
407	year_ini_cas=2004
408	mth_ini_cas=12
409	day_deb=16
410	heure_ini_cas=0.
411	pdt_cas=1800. ! forcing frequency
412	elseif (forcing_type .eq.105) THEN ! bomex starts 16-12-2004 0h
413	forcing_case2 = .true.
414	year_ini_cas=1969
415	mth_ini_cas=6
416	day_deb=24
417	heure_ini_cas=0.
418	pdt_cas=1800. ! forcing frequency
419	elseif (forcing_type .eq.106) THEN ! ayotte_24SC starts 6-11-1992 0h
420	forcing_case2 = .true.
421	year_ini_cas=1992
422	mth_ini_cas=11
423	day_deb=6
424	heure_ini_cas=10.
425	pdt_cas=86400. ! forcing frequency
426	elseif (forcing_type .eq.113) THEN ! Arm_cu starts 21-6-1997 11h30
427	forcing_SCM = .true.
428	year_ini_cas=1997
429	! It is possible that those parameters are run twice.
430	call getin('anneeref',year_ini_cas)
431	call getin('dayref',day_deb)
432	mth_ini_cas=1 ! pour le moment on compte depuis le debut de l'annee
433	call getin('time_ini',heure_ini_cas)
434	elseif (forcing_type .eq.40) THEN
435	forcing_GCSSold = .true.
436	elseif (forcing_type .eq.50) THEN
437	forcing_fire = .true.
438	elseif (forcing_type .eq.59) THEN
439	forcing_sandu = .true.
440	elseif (forcing_type .eq.60) THEN
441	forcing_astex = .true.
442	elseif (forcing_type .eq.61) THEN
443	forcing_armcu = .true.
444	IF(llm.NE.19.AND.llm.NE.40) stop 'Erreur nombre de niveaux !!'
445	else
446	write (,) 'ERROR : unknown forcing_type ', forcing_type
447	stop 'Forcing_type should be 0,1,2,3,4,5,6 or 40,59,60,61'
448	ENDIF
449	print*,"forcing type=",forcing_type
450
451	! if type_ts_forcing=0, the surface temp of 1D simulation is constant in time
452	! (specified by tsurf in lmdz1d.def); if type_ts_forcing=1, the surface temperature
453	! varies in time according to a forcing (e.g. forcing_toga) and is passed to read_tsurf1d.F
454	! through the common sst_forcing.
455
456	type_ts_forcing = 0
457	if (forcing_toga.or.forcing_sandu.or.forcing_astex .or. forcing_dice) &
458	& type_ts_forcing = 1
459	!
460	! Initialization of the logical switch for nudging
461	jcode = iflag_nudge
462	do i = 1,nudge_max
463	nudge(i) = mod(jcode,10) .ge. 1
464	jcode = jcode/10
465	enddo
466	!---------------------------------------------------------------------
467	! Definition of the run
468	!---------------------------------------------------------------------
469
470	call conf_gcm( 99, .TRUE. )
471
472	!-----------------------------------------------------------------------
473	allocate( phy_nat (year_len)) ! 0=ocean libre,1=land,2=glacier,3=banquise
474	phy_nat(:)=0.0
475	allocate( phy_alb (year_len)) ! Albedo land only (old value condsurf_jyg=0.3)
476	allocate( phy_sst (year_len)) ! SST (will not be used; cf read_tsurf1d.F)
477	allocate( phy_bil (year_len)) ! Ne sert que pour les slab_ocean
478	phy_bil(:)=1.0
479	allocate( phy_rug (year_len)) ! Longueur rugosite utilisee sur land only
480	allocate( phy_ice (year_len)) ! Fraction de glace
481	phy_ice(:)=0.0
482	allocate( phy_fter(year_len)) ! Fraction de terre
483	phy_fter(:)=0.0
484	allocate( phy_foce(year_len)) ! Fraction de ocean
485	phy_foce(:)=0.0
486	allocate( phy_fsic(year_len)) ! Fraction de glace
487	phy_fsic(:)=0.0
488	allocate( phy_flic(year_len)) ! Fraction de glace
489	phy_flic(:)=0.0
490	!-----------------------------------------------------------------------
491	! Choix du calendrier
492	! -------------------
493
494	! calend = 'earth_365d'
495	if (calend == 'earth_360d') then
496	call ioconf_calendar('360d')
497	write(,)'CALENDRIER CHOISI: Terrestre a 360 jours/an'
498	else if (calend == 'earth_365d') then
499	call ioconf_calendar('noleap')
500	write(,)'CALENDRIER CHOISI: Terrestre a 365 jours/an'
501	else if (calend == 'earth_366d') then
502	call ioconf_calendar('all_leap')
503	write(,)'CALENDRIER CHOISI: Terrestre bissextile'
504	else if (calend == 'gregorian') then
505	stop 'gregorian calend should not be used by normal user'
506	call ioconf_calendar('gregorian') ! not to be used by normal users
507	write(,)'CALENDRIER CHOISI: Gregorien'
508	else
509	write (,) 'ERROR : unknown calendar ', calend
510	stop 'calend should be 360d,earth_365d,earth_366d,gregorian'
511	endif
512	!-----------------------------------------------------------------------
513	!
514	!c Date :
515	! La date est supposee donnee sous la forme [annee, numero du jour dans
516	! l annee] ; l heure est donnee dans time_ini, lu dans lmdz1d.def.
517	! On appelle ymds2ju pour convertir [annee, jour] en [jour Julien].
518	! Le numero du jour est dans "day". L heure est traitee separement.
519	! La date complete est dans "daytime" (l'unite est le jour).
520	if (nday>0) then
521	fnday=nday
522	else
523	fnday=-nday/float(day_step)
524	endif
525	print *,'fnday=',fnday
526	! start_time doit etre en FRACTION DE JOUR
527	start_time=time_ini/24.
528
529	! Special case for arm_cu which lasts less than one day : 53100s !! (MPL 20111026)
530	IF(forcing_type .EQ. 61) fnday=53100./86400.
531	IF(forcing_type .EQ. 103) fnday=53100./86400.
532	! Special case for amma which lasts less than one day : 64800s !! (MPL 20120216)
533	IF(forcing_type .EQ. 6) fnday=64800./86400.
534	! IF(forcing_type .EQ. 6) fnday=50400./86400.
535	IF(forcing_type .EQ. 8 ) fnday=129600./86400.
536	annee_ref = anneeref
537	mois = 1
538	day_ref = dayref
539	heure = 0.
540	itau_dyn = 0
541	itau_phy = 0
542	call ymds2ju(annee_ref,mois,day_ref,heure,day)
543	day_ini = int(day)
544	day_end = day_ini + int(fnday)
545
546	IF (forcing_type .eq.2) THEN
547	! Convert the initial date of Toga-Coare to Julian day
548	call ymds2ju &
549	& (year_ini_toga,mth_ini_toga,day_ini_toga,heure,day_ju_ini_toga)
550
551	ELSEIF (forcing_type .eq.4) THEN
552	! Convert the initial date of TWPICE to Julian day
553	call ymds2ju &
554	& (year_ini_twpi,mth_ini_twpi,day_ini_twpi,heure_ini_twpi &
555	& ,day_ju_ini_twpi)
556	ELSEIF (forcing_type .eq.6) THEN
557	! Convert the initial date of AMMA to Julian day
558	call ymds2ju &
559	& (year_ini_amma,mth_ini_amma,day_ini_amma,heure_ini_amma &
560	& ,day_ju_ini_amma)
561	ELSEIF (forcing_type .eq.7) THEN
562	! Convert the initial date of DICE to Julian day
563	call ymds2ju &
564	& (year_ini_dice,mth_ini_dice,day_ini_dice,heure_ini_dice &
565	& ,day_ju_ini_dice)
566	ELSEIF (forcing_type .eq.8 ) THEN
567	! Convert the initial date of GABLS4 to Julian day
568	call ymds2ju &
569	& (year_ini_gabls4,mth_ini_gabls4,day_ini_gabls4,heure_ini_gabls4 &
570	& ,day_ju_ini_gabls4)
571	ELSEIF (forcing_type .gt.100) THEN
572	! Convert the initial date to Julian day
573	day_ini_cas=day_deb
574	print*,'time case',year_ini_cas,mth_ini_cas,day_ini_cas
575	call ymds2ju &
576	& (year_ini_cas,mth_ini_cas,day_ini_cas,heure_ini_cas*3600 &
577	& ,day_ju_ini_cas)
578	print*,'time case 2',day_ini_cas,day_ju_ini_cas
579	ELSEIF (forcing_type .eq.59) THEN
580	! Convert the initial date of Sandu case to Julian day
581	call ymds2ju &
582	& (year_ini_sandu,mth_ini_sandu,day_ini_sandu, &
583	& time_ini*3600.,day_ju_ini_sandu)
584
585	ELSEIF (forcing_type .eq.60) THEN
586	! Convert the initial date of Astex case to Julian day
587	call ymds2ju &
588	& (year_ini_astex,mth_ini_astex,day_ini_astex, &
589	& time_ini*3600.,day_ju_ini_astex)
590
591	ELSEIF (forcing_type .eq.61) THEN
592	! Convert the initial date of Arm_cu case to Julian day
593	call ymds2ju &
594	& (year_ini_armcu,mth_ini_armcu,day_ini_armcu,heure_ini_armcu &
595	& ,day_ju_ini_armcu)
596	ENDIF
597
598	IF (forcing_type .gt.100) THEN
599	daytime = day + heure_ini_cas/24. ! 1st day and initial time of the simulation
600	ELSE
601	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
602	ENDIF
603	! Print out the actual date of the beginning of the simulation :
604	call ju2ymds(daytime,year_print, month_print,day_print,sec_print)
605	print *,' Time of beginning : ', &
606	& year_print, month_print, day_print, sec_print
607
608	!---------------------------------------------------------------------
609	! Initialization of dimensions, geometry and initial state
610	!---------------------------------------------------------------------
611	! call init_phys_lmdz(1,1,llm,1,(/1/)) ! job now done via iniphysiq
612	! but we still need to initialize dimphy module (klon,klev,etc.) here.
613	call init_dimphy1D(1,llm)
614	call suphel
615	call infotrac_init
616
617	if (nqtot>nqmx) STOP 'Augmenter nqmx dans lmdz1d.F'
618	allocate(q(llm,nqtot)) ; q(:,:)=0.
619	allocate(dq(llm,nqtot))
620	allocate(dq_dyn(llm,nqtot))
621	allocate(d_q_adv(llm,nqtot))
622	allocate(d_q_nudge(llm,nqtot))
623	! allocate(d_th_adv(llm))
624
625	q(:,:) = 0.
626	dq(:,:) = 0.
627	dq_dyn(:,:) = 0.
628	d_q_adv(:,:) = 0.
629	d_q_nudge(:,:) = 0.
630
631	!
632	! No ozone climatology need be read in this pre-initialization
633	! (phys_state_var_init is called again in physiq)
634	read_climoz = 0
635	nsw=6 ! EV et LF: sinon, falb_dir et falb_dif ne peuvent etre alloues
636
637
638	call phys_state_var_init(read_climoz)
639
640	if (ngrid.ne.klon) then
641	print*,'stop in inifis'
642	print*,'Probleme de dimensions :'
643	print*,'ngrid = ',ngrid
644	print*,'klon = ',klon
645	stop
646	endif
647	!!!=====================================================================
648	!!! Feedback forcing values for Gateaux differentiation (al1)
649	!!!=====================================================================
650	!!! Surface Planck forcing bracketing call radiation
651	!! surf_Planck = 0.
652	!! surf_Conv = 0.
653	!! write(,) 'Gateaux-dif Planck,Conv:',surf_Planck,surf_Conv
654	!!! a mettre dans le lmdz1d.def ou autre
655	!!
656	!!
657	qsol = qsolinp
658	qsurf = fq_sat(tsurf,psurf/100.)
659	beta_surf = 1.
660	beta_aridity(:,:) = beta_surf
661	day1= day_ini
662	time=daytime-day
663	ts_toga(1)=tsurf ! needed by read_tsurf1d.F
664	rho(1)=psurf/(rdtsurf(1.+(rv/rd-1.)*qsurf))
665
666	!
667	!! mpl et jyg le 22/08/2012 :
668	!! pour que les cas a flux de surface imposes marchent
669	IF(.NOT.ok_flux_surf.or.max(abs(wtsurf),abs(wqsurf))>0.) THEN
670	fsens=-wtsurfrcpdrho(1)
671	flat=-wqsurfrlvttrho(1)
672	print *,'Flux: ok_flux wtsurf wqsurf',ok_flux_surf,wtsurf,wqsurf
673	ENDIF
674	print*,'Flux sol ',fsens,flat
675	!! ok_flux_surf=.false.
676	!! fsens=-wtsurfrcpdrho(1)
677	!! flat=-wqsurfrlvttrho(1)
678	!!!!
679
680	! Vertical discretization and pressure levels at half and mid levels:
681
682	pa = 5e4
683	!! preff= 1.01325e5
684	preff = psurf
685	IF (ok_old_disvert) THEN
686	call disvert0(pa,preff,ap,bp,dpres,presnivs,nivsigs,nivsig)
687	print *,'On utilise disvert0'
688	aps(1:llm)=0.5*(ap(1:llm)+ap(2:llm+1))
689	bps(1:llm)=0.5*(bp(1:llm)+bp(2:llm+1))
690	scaleheight=8.
691	pseudoalt(1:llm)=-scaleheight*log(presnivs(1:llm)/preff)
692	ELSE
693	call disvert()
694	print *,'On utilise disvert'
695	! Nouvelle version disvert permettant d imposer ap,bp (modif L.Guez) MPL 18092012
696	! Dans ce cas, on lit ap,bp dans le fichier hybrid.txt
697	ENDIF
698
699	sig_s=presnivs/preff
700	plev =ap+bp*psurf
701	play = 0.5*(plev(1:llm)+plev(2:llm+1))
702	zlay=-rd300.log(play/psurf)/rg ! moved after reading profiles
703
704	IF (forcing_type .eq. 59) THEN
705	! pour forcing_sandu, on cherche l'indice le plus proche de 700hpa#3000m
706	write(,) '***********************'
707	do l = 1, llm
708	write(,) 'l,play(l),presnivs(l): ',l,play(l),presnivs(l)
709	if (trouve_700 .and. play(l).le.70000) then
710	llm700=l
711	print *,'llm700,play=',llm700,play(l)/100.
712	trouve_700= .false.
713	endif
714	enddo
715	write(,) '***********************'
716	ENDIF
717
718	!
719	!=====================================================================
720	! EVENTUALLY, READ FORCING DATA :
721	!=====================================================================
722
723	#include "old_1D_read_forc_cases.h"
724
725	if (forcing_GCM2SCM) then
726	write (,) 'forcing_GCM2SCM not yet implemented'
727	stop 'in initialization'
728	endif ! forcing_GCM2SCM
729
730	print*,'mxcalc=',mxcalc
731	! print*,'zlay=',zlay(mxcalc)
732	print*,'play=',play(mxcalc)
733
734	!Al1 pour SST forced, appell?? depuis ocean_forced_noice
735	! EV tg instead of ts_cur
736
737	tg = tsurf ! SST used in read_tsurf1d
738	!=====================================================================
739	! Initialisation de la physique :
740	!=====================================================================
741
742	! Rq: conf_phys.F90 lit tous les flags de physiq.def; conf_phys appele depuis physiq.F
743	!
744	! day_step, iphysiq lus dans gcm.def ci-dessus
745	! timestep: calcule ci-dessous from rday et day_step
746	! ngrid=1
747	! llm: defini dans .../modipsl/modeles/LMDZ4/libf/grid/dimension
748	! rday: defini dans suphel.F (86400.)
749	! day_ini: lu dans run.def (dayref)
750	! rlat_rad,rlon-rad: transformes en radian de rlat,rlon lus dans lmdz1d.def (en degres)
751	! airefi,zcufi,zcvfi initialises au debut de ce programme
752	! rday,ra,rg,rd,rcpd declares dans YOMCST.h et calcules dans suphel.F
753	day_step = float(nsplit_phys)*day_step/float(iphysiq)
754	write (,) 'Time step divided by nsplit_phys (=',nsplit_phys,')'
755	timestep =rday/day_step
756	dtime_frcg = timestep
757	!
758	zcufi=airefi
759	zcvfi=airefi
760	!
761	rlat_rad(1)=xlat*rpi/180.
762	rlon_rad(1)=xlon*rpi/180.
763
764	! iniphysiq will call iniaqua who needs year_len from phys_cal_mod
765	year_len_phys_cal_mod=year_len
766
767	! Ehouarn: iniphysiq requires arrays related to (3D) dynamics grid,
768	! e.g. for cell boundaries, which are meaningless in 1D; so pad these
769	! with '0.' when necessary
770	call iniphysiq(iim,jjm,llm, &
771	1,comm_lmdz, &
772	rday,day_ini,timestep, &
773	(/rlat_rad(1),0./),(/0./), &
774	(/0.,0./),(/rlon_rad(1),0./), &
775	(/ (/airefi,0./),(/0.,0./) /), &
776	(/zcufi,0.,0.,0./), &
777	(/zcvfi,0./), &
778	ra,rg,rd,rcpd,1)
779	print*,'apres iniphysiq'
780
781	! 2 PARAMETRES QUI DEVRAIENT ETRE LUS DANS run.def MAIS NE LE SONT PAS ICI:
782	co2_ppm= 330.0
783	solaire=1370.0
784
785	! Ecriture du startphy avant le premier appel a la physique.
786	! On le met juste avant pour avoir acces a tous les champs
787
788	if (ok_writedem) then
789
790	!--------------------------------------------------------------------------
791	! pbl_surface_init (called here) and pbl_surface_final (called by phyredem)
792	! need : qsol fder snow qsurf evap rugos agesno ftsoil
793	!--------------------------------------------------------------------------
794
795	type_ocean = "force"
796	run_off_lic_0(1) = restart_runoff
797	call fonte_neige_init(run_off_lic_0)
798
799	fder=0.
800	snsrf(1,:)=snowmass ! masse de neige des sous surface
801	print *, 'snsrf', snsrf
802	qsurfsrf(1,:)=qsurf ! humidite de l'air des sous surface
803	fevap=0.
804	z0m(1,:)=rugos ! couverture de neige des sous surface
805	z0h(1,:)=rugosh ! couverture de neige des sous surface
806	agesno = xagesno
807	tsoil(:,:,:)=tsurf
808	!------ AMMA 2e run avec modele sol et rayonnement actif (MPL 23052012)
809	! tsoil(1,1,1)=299.18
810	! tsoil(1,2,1)=300.08
811	! tsoil(1,3,1)=301.88
812	! tsoil(1,4,1)=305.48
813	! tsoil(1,5,1)=308.00
814	! tsoil(1,6,1)=308.00
815	! tsoil(1,7,1)=308.00
816	! tsoil(1,8,1)=308.00
817	! tsoil(1,9,1)=308.00
818	! tsoil(1,10,1)=308.00
819	! tsoil(1,11,1)=308.00
820	!-----------------------------------------------------------------------
821	call pbl_surface_init(fder, snsrf, qsurfsrf, tsoil)
822
823	!------------------ prepare limit conditions for limit.nc -----------------
824	!-- Ocean force
825
826	print*,'avant phyredem'
827	pctsrf(1,:)=0.
828	if (nat_surf.eq.0.) then
829	pctsrf(1,is_oce)=1.
830	pctsrf(1,is_ter)=0.
831	pctsrf(1,is_lic)=0.
832	pctsrf(1,is_sic)=0.
833	else if (nat_surf .eq. 1) then
834	pctsrf(1,is_oce)=0.
835	pctsrf(1,is_ter)=1.
836	pctsrf(1,is_lic)=0.
837	pctsrf(1,is_sic)=0.
838	else if (nat_surf .eq. 2) then
839	pctsrf(1,is_oce)=0.
840	pctsrf(1,is_ter)=0.
841	pctsrf(1,is_lic)=1.
842	pctsrf(1,is_sic)=0.
843	else if (nat_surf .eq. 3) then
844	pctsrf(1,is_oce)=0.
845	pctsrf(1,is_ter)=0.
846	pctsrf(1,is_lic)=0.
847	pctsrf(1,is_sic)=1.
848
849	end if
850
851	print*,'nat_surf,pctsrf(1,is_oce),pctsrf(1,is_ter)',nat_surf &
852	& ,pctsrf(1,is_oce),pctsrf(1,is_ter)
853
854	zmasq=pctsrf(1,is_ter)+pctsrf(1,is_lic)
855	zpic = zpicinp
856	ftsol=tsurf
857	falb_dir=albedo
858	falb_dif=albedo
859	rugoro=rugos
860	t_ancien(1,:)=temp(:)
861	q_ancien(1,:)=q(:,1)
862	ql_ancien = 0.
863	qs_ancien = 0.
864	prlw_ancien = 0.
865	prsw_ancien = 0.
866	prw_ancien = 0.
867	!jyg<
868	!! pbl_tke(:,:,:)=1.e-8
869	pbl_tke(:,:,:)=0.
870	pbl_tke(:,2,:)=1.e-2
871	PRINT *, ' pbl_tke dans lmdz1d '
872	if (prt_level .ge. 5) then
873	DO nsrf = 1,4
874	PRINT *,'pbl_tke(1,:,',nsrf,') ',pbl_tke(1,:,nsrf)
875	ENDDO
876	end if
877
878	!>jyg
879
880	rain_fall=0.
881	snow_fall=0.
882	solsw=0.
883	solswfdiff=0.
884	sollw=0.
885	sollwdown=rsigmatsurf*4
886	radsol=0.
887	rnebcon=0.
888	ratqs=0.
889	clwcon=0.
890	zmax0 = 0.
891	zmea=0.
892	zstd=0.
893	zsig=0.
894	zgam=0.
895	zval=0.
896	zthe=0.
897	sig1=0.
898	w01=0.
899	!
900	wake_deltaq = 0.
901	wake_deltat = 0.
902	wake_delta_pbl_TKE(:,:,:) = 0.
903	delta_tsurf = 0.
904	wake_fip = 0.
905	wake_pe = 0.
906	wake_s = 0.
907	wake_dens = 0.
908	awake_dens = 0.
909	cv_gen = 0.
910	wake_cstar = 0.
911	ale_bl = 0.
912	ale_bl_trig = 0.
913	alp_bl = 0.
914	IF (ALLOCATED(du_gwd_rando)) du_gwd_rando = 0.
915	IF (ALLOCATED(du_gwd_front)) du_gwd_front = 0.
916	entr_therm = 0.
917	detr_therm = 0.
918	f0 = 0.
919	fm_therm = 0.
920	u_ancien(1,:)=u(:)
921	v_ancien(1,:)=v(:)
922
923	u10m=0.
924	v10m=0.
925	ale_wake=0.
926	ale_bl_stat=0.
927
928	!------------------------------------------------------------------------
929	! Make file containing restart for the physics (startphy.nc)
930	!
931	! NB: List of the variables to be written by phyredem (via put_field):
932	! rlon,rlat,zmasq,pctsrf(:,is_ter),pctsrf(:,is_lic),pctsrf(:,is_oce)
933	! pctsrf(:,is_sic),ftsol(:,nsrf),tsoil(:,isoil,nsrf),qsurf(:,nsrf)
934	! qsol,falb_dir(:,nsrf),falb_dif(:,nsrf),evap(:,nsrf),snow(:,nsrf)
935	! radsol,solsw,solswfdiff,sollw, sollwdown,fder,rain_fall,snow_fall,frugs(:,nsrf)
936	! agesno(:,nsrf),zmea,zstd,zsig,zgam,zthe,zpic,zval,rugoro
937	! t_ancien,q_ancien,,frugs(:,is_oce),clwcon(:,1),rnebcon(:,1),ratqs(:,1)
938	! run_off_lic_0,pbl_tke(:,1:klev,nsrf), zmax0,f0,sig1,w01
939	! wake_deltat,wake_deltaq,wake_s,wake_dens,awake_dens,cv_gen,wake_cstar,
940	! wake_fip,wake_delta_pbl_tke(:,1:klev,nsrf)
941	!
942	! NB2: The content of the startphy.nc file depends on some flags defined in
943	! the ".def" files. However, since conf_phys is not called in lmdz1d.F90, these flags have
944	! to be set at some arbitratry convenient values.
945	!------------------------------------------------------------------------
946	!Al1 =============== restart option ==========================
947	if (.not.restart) then
948	iflag_pbl = 5
949	call phyredem ("startphy.nc")
950	else
951	! (desallocations)
952	print*,'callin surf final'
953	call pbl_surface_final( fder, snsrf, qsurfsrf, tsoil)
954	print*,'after surf final'
955	CALL fonte_neige_final(run_off_lic_0)
956	endif
957
958	ok_writedem=.false.
959	print*,'apres phyredem'
960
961	endif ! ok_writedem
962
963	!------------------------------------------------------------------------
964	! Make file containing boundary conditions (limit.nc) Al1->restartdyn*
965	! --------------------------------------------------
966	! NB: List of the variables to be written in limit.nc
967	! (by writelim.F, subroutine of 1DUTILS.h):
968	! phy_nat,phy_alb,phy_sst,phy_bil,phy_rug,phy_ice,
969	! phy_fter,phy_foce,phy_flic,phy_fsic)
970	!------------------------------------------------------------------------
971	do i=1,year_len
972	phy_nat(i) = nat_surf
973	phy_alb(i) = albedo
974	phy_sst(i) = tsurf ! read_tsurf1d will be used instead
975	phy_rug(i) = rugos
976	phy_fter(i) = pctsrf(1,is_ter)
977	phy_foce(i) = pctsrf(1,is_oce)
978	phy_fsic(i) = pctsrf(1,is_sic)
979	phy_flic(i) = pctsrf(1,is_lic)
980	enddo
981
982	! fabrication de limit.nc
983	call writelim (1,phy_nat,phy_alb,phy_sst,phy_bil,phy_rug, &
984	& phy_ice,phy_fter,phy_foce,phy_flic,phy_fsic)
985
986
987	call phys_state_var_end
988	!Al1
989	if (restart) then
990	print*,'call to restart dyn 1d'
991	Call dyn1deta0("start1dyn.nc",plev,play,phi,phis,presnivs, &
992	& u,v,temp,q,omega2)
993
994	print*,'fnday,annee_ref,day_ref,day_ini', &
995	& fnday,annee_ref,day_ref,day_ini
996	!** call ymds2ju(annee_ref,mois,day_ini,heure,day)
997	day = day_ini
998	day_end = day_ini + nday
999	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
1000
1001	! Print out the actual date of the beginning of the simulation :
1002	call ju2ymds(daytime, an, mois, jour, heure)
1003	print *,' Time of beginning : y m d h',an, mois,jour,heure/3600.
1004
1005	day = int(daytime)
1006	time=daytime-day
1007
1008	print,'*** intialised fields from restart1dyn *****'
1009	print*,'plev,play,phi,phis,presnivs,u,v,temp,q,omega2'
1010	print*,'temp(1),q(1,1),u(1),v(1),plev(1),phis :'
1011	print*,temp(1),q(1,1),u(1),v(1),plev(1),phis
1012	! raz for safety
1013	do l=1,llm
1014	dq_dyn(l,1) = 0.
1015	enddo
1016	endif
1017	!Al1 ================ end restart =================================
1018	IF (ecrit_slab_oc.eq.1) then
1019	open(97,file='div_slab.dat',STATUS='UNKNOWN')
1020	elseif (ecrit_slab_oc.eq.0) then
1021	open(97,file='div_slab.dat',STATUS='OLD')
1022	endif
1023	!
1024	!---------------------------------------------------------------------
1025	! Initialize target profile for RHT nudging if needed
1026	!---------------------------------------------------------------------
1027	if (nudge(inudge_RHT)) then
1028	call nudge_RHT_init(plev,play,temp,q(:,1),t_targ,rh_targ)
1029	endif
1030	if (nudge(inudge_UV)) then
1031	call nudge_UV_init(plev,play,u,v,u_targ,v_targ)
1032	endif
1033	!
1034	!=====================================================================
1035	CALL iophys_ini(timestep)
1036	! START OF THE TEMPORAL LOOP :
1037	!=====================================================================
1038
1039	it_end = nint(fnday*day_step)
1040	!test JLD it_end = 10
1041	do while(it.le.it_end)
1042
1043	if (prt_level.ge.1) then
1044	print*,'XXXXXXXXXXXXXXXXXXX ITAP,day,time=', &
1045	& it,day,time,it_end,day_step
1046	print*,'PAS DE TEMPS ',timestep
1047	endif
1048	!Al1 demande de restartphy.nc
1049	if (it.eq.it_end) lastcall=.True.
1050
1051	!---------------------------------------------------------------------
1052	! Interpolation of forcings in time and onto model levels
1053	!---------------------------------------------------------------------
1054
1055	#include "old_1D_interp_cases.h"
1056
1057	if (forcing_GCM2SCM) then
1058	write (,) 'forcing_GCM2SCM not yet implemented'
1059	stop 'in time loop'
1060	endif ! forcing_GCM2SCM
1061
1062	!---------------------------------------------------------------------
1063	! Geopotential :
1064	!---------------------------------------------------------------------
1065
1066	phi(1)=RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
1067	do l = 1, llm-1
1068	phi(l+1)=phi(l)+RD(temp(l)+temp(l+1)) &
1069	& (play(l)-play(l+1))/(play(l)+play(l+1))
1070	enddo
1071
1072	!---------------------------------------------------------------------
1073	! Listing output for debug prt_level>=1
1074	!---------------------------------------------------------------------
1075	if (prt_level>=1) then
1076	print *,' avant physiq : -------- day time ',day,time
1077	write(,) 'firstcall,lastcall,phis', &
1078	& firstcall,lastcall,phis
1079	end if
1080	if (prt_level>=5) then
1081	write(*,'(a10,2a4,4a13)') 'BEFOR1 IT=','it','l', &
1082	& 'presniv','plev','play','phi'
1083	write(*,'(a10,2i4,4f13.2)') ('BEFOR1 IT= ',it,l, &
1084	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
1085	write(*,'(a11,2a4,a11,6a8)') 'BEFOR2','it','l', &
1086	& 'presniv','u','v','temp','q1','q2','omega2'
1087	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('BEFOR2 IT= ',it,l, &
1088	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
1089	endif
1090
1091	!---------------------------------------------------------------------
1092	! Call physiq :
1093	!---------------------------------------------------------------------
1094	call physiq(ngrid,llm, &
1095	firstcall,lastcall,timestep, &
1096	plev,play,phi,phis,presnivs, &
1097	u,v, rot, temp,q,omega2, &
1098	du_phys,dv_phys,dt_phys,dq,dpsrf)
1099	firstcall=.false.
1100
1101	!---------------------------------------------------------------------
1102	! Listing output for debug
1103	!---------------------------------------------------------------------
1104	if (prt_level>=5) then
1105	write(*,'(a11,2a4,4a13)') 'AFTER1 IT=','it','l', &
1106	& 'presniv','plev','play','phi'
1107	write(*,'(a11,2i4,4f13.2)') ('AFTER1 it= ',it,l, &
1108	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
1109	write(*,'(a11,2a4,a11,6a8)') 'AFTER2','it','l', &
1110	& 'presniv','u','v','temp','q1','q2','omega2'
1111	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('AFTER2 it= ',it,l, &
1112	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
1113	write(*,'(a11,2a4,a11,5a8)') 'AFTER3','it','l', &
1114	& 'presniv','du_phys','dv_phys','dt_phys','dq1','dq2'
1115	write(*,'(a11,2i4,f11.2,5f8.2)') ('AFTER3 it= ',it,l, &
1116	& presnivs(l),86400du_phys(l),86400dv_phys(l), &
1117	& 86400dt_phys(l),86400dq(l,1),dq(l,2),l=1,llm)
1118	write(,) 'dpsrf',dpsrf
1119	endif
1120	!---------------------------------------------------------------------
1121	! Add physical tendencies :
1122	!---------------------------------------------------------------------
1123
1124	fcoriolis=2.sin(rpixlat/180.)*romega
1125	if (forcing_radconv .or. forcing_fire) then
1126	fcoriolis=0.0
1127	dt_cooling=0.0
1128	d_t_adv=0.0
1129	d_q_adv=0.0
1130	endif
1131	! print*, 'calcul de fcoriolis ', fcoriolis
1132
1133	if (forcing_toga .or. forcing_GCSSold .or. forcing_twpice &
1134	& .or.forcing_amma .or. forcing_type.eq.101) then
1135	fcoriolis=0.0 ; ug=0. ; vg=0.
1136	endif
1137
1138	if(forcing_rico) then
1139	dt_cooling=0.
1140	endif
1141
1142	!CRio:Attention modif sp??cifique cas de Caroline
1143	if (forcing_type==-1) then
1144	fcoriolis=0.
1145	!Nudging
1146
1147	!on calcule dt_cooling
1148	do l=1,llm
1149	if (play(l).ge.20000.) then
1150	dt_cooling(l)=-1.5/86400.
1151	elseif ((play(l).ge.10000.).and.((play(l).lt.20000.))) then
1152	dt_cooling(l)=-1.5/86400.(play(l)-10000.)/(10000.)-1./86400.(20000.-play(l))/10000.*(temp(l)-200.)
1153	else
1154	dt_cooling(l)=-1.*(temp(l)-200.)/86400.
1155	endif
1156	enddo
1157
1158	endif
1159	!RC
1160	if (forcing_sandu) then
1161	ug(1:llm)=u_mod(1:llm)
1162	vg(1:llm)=v_mod(1:llm)
1163	endif
1164
1165	IF (prt_level >= 5) print*, 'fcoriolis, xlat,mxcalc ', &
1166	fcoriolis, xlat,mxcalc
1167
1168	! print *,'u-ug=',u-ug
1169
1170	!!!!!!!!!!!!!!!!!!!!!!!!
1171	! Geostrophic wind
1172	! Le calcul ci dessous est insuffisamment precis
1173	! du_age(1:mxcalc)=fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
1174	! dv_age(1:mxcalc)=-fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
1175	!!!!!!!!!!!!!!!!!!!!!!!!
1176	sfdt = sin(0.5fcoriolistimestep)
1177	cfdt = cos(0.5fcoriolistimestep)
1178	! print *,'fcoriolis,sfdt,cfdt,timestep',fcoriolis,sfdt,cfdt,timestep
1179	!
1180	du_age(1:mxcalc)= -2.sfdt/timestep &
1181	& (sfdt*(u(1:mxcalc)-ug(1:mxcalc)) - &
1182	& cfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
1183	!! : fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
1184	!
1185	dv_age(1:mxcalc)= -2.sfdt/timestep &
1186	& (cfdt*(u(1:mxcalc)-ug(1:mxcalc)) + &
1187	& sfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
1188	!! : -fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
1189	!
1190	!!!!!!!!!!!!!!!!!!!!!!!!
1191	! Nudging
1192	!!!!!!!!!!!!!!!!!!!!!!!!
1193	d_t_nudge(:) = 0.
1194	d_q_nudge(:,:) = 0.
1195	d_u_nudge(:) = 0.
1196	d_v_nudge(:) = 0.
1197	if (nudge(inudge_RHT)) then
1198	call nudge_RHT(timestep,plev,play,t_targ,rh_targ,temp,q(:,1), &
1199	& d_t_nudge,d_q_nudge(:,1))
1200	endif
1201	if (nudge(inudge_UV)) then
1202	call nudge_UV(timestep,plev,play,u_targ,v_targ,u,v, &
1203	& d_u_nudge,d_v_nudge)
1204	endif
1205	!
1206	if (forcing_fire) THEN
1207
1208	!let ww=if ( alt le 1100 ) then alt*-0.00001 else 0
1209	!let wt=if ( alt le 1100 ) then min( -3.75e-5 , -7.5e-8*alt) else 0
1210	!let wq=if ( alt le 1100 ) then max( 1.5e-8 , 3e-11*alt) else 0
1211	d_t_adv=0.
1212	d_q_adv=0.
1213	teta=temp(pzero/play)*rkappa
1214	d_t_adv=0.
1215	d_q_adv=0.
1216	do l=2,llm-1
1217	if (zlay(l)<=1100) then
1218	wwww=-0.00001*zlay(l)
1219	d_t_adv(l)=-wwww(teta(l)-teta(l+1))/(zlay(l)-zlay(l+1)) /(pzero/play(l))*rkappa
1220	d_q_adv(l,1:2)=-wwww*(q(l,1:2)-q(l+1,1:2))/(zlay(l)-zlay(l+1))
1221	d_t_adv(l)=d_t_adv(l)+min(-3.75e-5 , -7.5e-8*zlay(l))
1222	d_q_adv(l,1)=d_q_adv(l,1)+max( 1.5e-8 , 3e-11*zlay(l))
1223	endif
1224	enddo
1225
1226	endif
1227
1228	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1229	! call writefield_phy('dv_age' ,dv_age,llm)
1230	! call writefield_phy('du_age' ,du_age,llm)
1231	! call writefield_phy('du_phys' ,du_phys,llm)
1232	! call writefield_phy('u_tend' ,u,llm)
1233	! call writefield_phy('u_g' ,ug,llm)
1234	!
1235	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1236	!! Increment state variables
1237	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1238	print*,'OLDLMDZ1D AANT'
1239	IF (flag_inhib_forcing == 0) then ! if tendency of forcings should be added
1240	print*,'OLDLMDZ1D ARES' , forcing_sandu
1241
1242	! pour les cas sandu et astex, on reclacule u,v,q,temp et teta dans 1D_nudge_sandu_astex.h
1243	! au dessus de 700hpa, on relaxe vers les profils initiaux
1244	if (forcing_sandu .OR. forcing_astex) then
1245	#include "1D_nudge_sandu_astex.h"
1246	else
1247	u(1:mxcalc)=u(1:mxcalc) + timestep*( &
1248	& du_phys(1:mxcalc) &
1249	& +du_age(1:mxcalc)+du_adv(1:mxcalc) &
1250	& +d_u_nudge(1:mxcalc) )
1251	v(1:mxcalc)=v(1:mxcalc) + timestep*( &
1252	& dv_phys(1:mxcalc) &
1253	& +dv_age(1:mxcalc)+dv_adv(1:mxcalc) &
1254	& +d_v_nudge(1:mxcalc) )
1255	q(1:mxcalc,:)=q(1:mxcalc,:)+timestep*( &
1256	& dq(1:mxcalc,:) &
1257	& +d_q_adv(1:mxcalc,:) &
1258	& +d_q_nudge(1:mxcalc,:) )
1259
1260	if (prt_level.ge.3) then
1261	print *, &
1262	& 'physiq-> temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1) ', &
1263	& temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1)
1264	print* ,'dv_phys=',dv_phys
1265	print* ,'dv_age=',dv_age
1266	print* ,'dv_adv=',dv_adv
1267	print* ,'d_v_nudge=',d_v_nudge
1268	print*, v
1269	print*, vg
1270	endif
1271
1272	temp(1:mxcalc)=temp(1:mxcalc)+timestep*( &
1273	& dt_phys(1:mxcalc) &
1274	& +d_t_adv(1:mxcalc) &
1275	& +d_t_nudge(1:mxcalc) &
1276	& +dt_cooling(1:mxcalc)) ! Taux de chauffage ou refroid.
1277
1278	print*,'OLDLMDZ1D IOPH'
1279	CALL iophys_ecrit('d_t_adv',klev,'d_t_adv','m/s',d_t_adv)
1280	CALL iophys_ecrit('d_t_nudge',klev,'d_t_nudge','m/s',d_t_nudge)
1281
1282	endif ! forcing_sandu or forcing_astex
1283
1284	teta=temp(pzero/play)*rkappa
1285	!
1286	!---------------------------------------------------------------------
1287	! Nudge soil temperature if requested
1288	!---------------------------------------------------------------------
1289
1290	IF (nudge_tsoil .AND. .NOT. lastcall) THEN
1291	ftsoil(1,isoil_nudge,:) = ftsoil(1,isoil_nudge,:) &
1292	& -timestep/tau_soil_nudge*(ftsoil(1,isoil_nudge,:)-Tsoil_nudge)
1293	ENDIF
1294
1295	!---------------------------------------------------------------------
1296	! Add large-scale tendencies (advection, etc) :
1297	!---------------------------------------------------------------------
1298
1299	!cc nrlmd
1300	!cc tmpvar=teta
1301	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1302	!cc
1303	!cc teta(1:mxcalc)=tmpvar(1:mxcalc)
1304	!cc tmpvar(:)=q(:,1)
1305	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1306	!cc q(1:mxcalc,1)=tmpvar(1:mxcalc)
1307	!cc tmpvar(:)=q(:,2)
1308	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1309	!cc q(1:mxcalc,2)=tmpvar(1:mxcalc)
1310
1311	END IF ! end if tendency of tendency should be added
1312
1313	!---------------------------------------------------------------------
1314	! Air temperature :
1315	!---------------------------------------------------------------------
1316	if (lastcall) then
1317	print*,'Pas de temps final ',it
1318	call ju2ymds(daytime, an, mois, jour, heure)
1319	print*,'a la date : a m j h',an, mois, jour ,heure/3600.
1320	endif
1321
1322	! incremente day time
1323	! print*,'daytime bef',daytime,1./day_step
1324	daytime = daytime+1./day_step
1325	!Al1dbg
1326	day = int(daytime+0.1/day_step)
1327	! time = max(daytime-day,0.0)
1328	!Al1&jyg: correction de bug
1329	!cc time = real(mod(it,day_step))/day_step
1330	time = time_ini/24.+real(mod(it,day_step))/day_step
1331	! print*,'daytime nxt time',daytime,time
1332	it=it+1
1333
1334	enddo
1335
1336	!Al1
1337	if (ecrit_slab_oc.ne.-1) close(97)
1338
1339	!Al1 Call to 1D equivalent of dynredem (an,mois,jour,heure ?)
1340	! -------------------------------------
1341	call dyn1dredem("restart1dyn.nc", &
1342	& plev,play,phi,phis,presnivs, &
1343	& u,v,temp,q,omega2)
1344
1345	CALL abort_gcm ('lmdz1d ','The End ',0)
1346
1347	END SUBROUTINE old_lmdz1d
1348
1349	#include "old_1DUTILS_read_interp.h"

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format