Context Navigation

old_lmdz1d.F90 @ 3817

Last change on this file since 3817 was 3781, checked in by evignon, 4 years ago
Initialisation de la TKE pour les cas 1D (important pour GABLS1), Etienne
File size: 50.2 KB

Rev	Line
[3541]	1	!
	2	! $Id: lmdz1d.F90 3540 2019-06-25 14:50:13Z fairhead $
	3	!
	4
	5	SUBROUTINE old_lmdz1d
	6
	7	USE ioipsl, only: ju2ymds, ymds2ju, ioconf_calendar,getin
	8	USE phys_state_var_mod, ONLY : phys_state_var_init, phys_state_var_end, &
	9	clwcon, detr_therm, &
	10	qsol, fevap, z0m, z0h, agesno, &
	11	du_gwd_rando, du_gwd_front, entr_therm, f0, fm_therm, &
	12	falb_dir, falb_dif, &
	13	ftsol, pbl_tke, pctsrf, radsol, rain_fall, snow_fall, ratqs, &
	14	rnebcon, rugoro, sig1, w01, solaire_etat0, sollw, sollwdown, &
	15	solsw, t_ancien, q_ancien, u_ancien, v_ancien, wake_cstar, &
	16	wake_delta_pbl_TKE, delta_tsurf, wake_fip, wake_pe, &
	17	wake_deltaq, wake_deltat, wake_s, wake_dens, &
	18	zgam, zmax0, zmea, zpic, zsig, &
	19	zstd, zthe, zval, ale_bl, ale_bl_trig, alp_bl, ql_ancien, qs_ancien, &
[3575]	20	prlw_ancien, prsw_ancien, prw_ancien, &
	21	u10m,v10m,ale_wake,ale_bl_stat
	22
[3541]	23
	24	USE dimphy
	25	USE surface_data, only : type_ocean,ok_veget
	26	USE pbl_surface_mod, only : ftsoil, pbl_surface_init, &
	27	pbl_surface_final
	28	USE fonte_neige_mod, only : fonte_neige_init, fonte_neige_final
	29
	30	USE infotrac ! new
	31	USE control_mod
	32	USE indice_sol_mod
	33	USE phyaqua_mod
	34	! USE mod_1D_cases_read
	35	USE mod_1D_cases_read2
	36	USE mod_1D_amma_read
	37	USE print_control_mod, ONLY: lunout, prt_level
	38	USE iniphysiq_mod, ONLY: iniphysiq
	39	USE mod_const_mpi, ONLY: comm_lmdz
	40	USE physiq_mod, ONLY: physiq
	41	USE comvert_mod, ONLY: presnivs, ap, bp, dpres,nivsig, nivsigs, pa, &
	42	preff, aps, bps, pseudoalt, scaleheight
	43	USE temps_mod, ONLY: annee_ref, calend, day_end, day_ini, day_ref, &
	44	itau_dyn, itau_phy, start_time, year_len
	45	USE phys_cal_mod, ONLY : year_len_phys_cal_mod => year_len
	46
	47	implicit none
	48	#include "dimensions.h"
	49	#include "YOMCST.h"
	50	!!#include "control.h"
	51	#include "clesphys.h"
	52	#include "dimsoil.h"
	53	!#include "indicesol.h"
	54
	55	#include "compar1d.h"
	56	#include "flux_arp.h"
	57	#include "date_cas.h"
	58	#include "tsoilnudge.h"
	59	#include "fcg_gcssold.h"
	60	!!!#include "fbforcing.h"
	61	#include "compbl.h"
	62
	63	!=====================================================================
	64	! DECLARATIONS
	65	!=====================================================================
	66
	67	!---------------------------------------------------------------------
	68	! Externals
	69	!---------------------------------------------------------------------
	70	external fq_sat
	71	real fq_sat
	72
	73	!---------------------------------------------------------------------
	74	! Arguments d' initialisations de la physique (USER DEFINE)
	75	!---------------------------------------------------------------------
	76
	77	integer, parameter :: ngrid=1
	78	real :: zcufi = 1.
	79	real :: zcvfi = 1.
	80
	81	!- real :: nat_surf
	82	!- logical :: ok_flux_surf
	83	!- real :: fsens
	84	!- real :: flat
	85	!- real :: tsurf
	86	!- real :: rugos
	87	!- real :: qsol(1:2)
	88	!- real :: qsurf
	89	!- real :: psurf
	90	!- real :: zsurf
	91	!- real :: albedo
	92	!-
	93	!- real :: time = 0.
	94	!- real :: time_ini
	95	!- real :: xlat
	96	!- real :: xlon
	97	!- real :: wtsurf
	98	!- real :: wqsurf
	99	!- real :: restart_runoff
	100	!- real :: xagesno
	101	!- real :: qsolinp
	102	!- real :: zpicinp
	103	!-
	104	real :: fnday
	105	real :: day, daytime
	106	real :: day1
	107	real :: heure
	108	integer :: jour
	109	integer :: mois
	110	integer :: an
	111
	112	!---------------------------------------------------------------------
	113	! Declarations related to forcing and initial profiles
	114	!---------------------------------------------------------------------
	115
	116	integer :: kmax = llm
	117	integer llm700,nq1,nq2
	118	INTEGER, PARAMETER :: nlev_max=1000, nqmx=1000
	119	real timestep, frac
	120	real height(nlev_max),tttprof(nlev_max),qtprof(nlev_max)
	121	real uprof(nlev_max),vprof(nlev_max),e12prof(nlev_max)
	122	real ugprof(nlev_max),vgprof(nlev_max),wfls(nlev_max)
	123	real dqtdxls(nlev_max),dqtdyls(nlev_max)
	124	real dqtdtls(nlev_max),thlpcar(nlev_max)
	125	real qprof(nlev_max,nqmx)
	126
	127	! integer :: forcing_type
	128	logical :: forcing_les = .false.
	129	logical :: forcing_armcu = .false.
	130	logical :: forcing_rico = .false.
	131	logical :: forcing_radconv = .false.
	132	logical :: forcing_toga = .false.
	133	logical :: forcing_twpice = .false.
	134	logical :: forcing_amma = .false.
	135	logical :: forcing_dice = .false.
	136	logical :: forcing_gabls4 = .false.
	137
	138	logical :: forcing_GCM2SCM = .false.
	139	logical :: forcing_GCSSold = .false.
	140	logical :: forcing_sandu = .false.
	141	logical :: forcing_astex = .false.
	142	logical :: forcing_fire = .false.
	143	logical :: forcing_case = .false.
	144	logical :: forcing_case2 = .false.
	145	logical :: forcing_SCM = .false.
	146	integer :: type_ts_forcing ! 0 = SST constant; 1 = SST read from a file
	147	! (cf read_tsurf1d.F)
	148
	149	real wwww
	150	!vertical advection computation
	151	! real d_t_z(llm), d_q_z(llm)
	152	! real d_t_dyn_z(llm), dq_dyn_z(llm)
	153	! real zz(llm)
	154	! real zfact
	155
	156	!flag forcings
	157	logical :: nudge_wind=.true.
	158	logical :: nudge_thermo=.false.
	159	logical :: cptadvw=.true.
	160	!=====================================================================
	161	! DECLARATIONS FOR EACH CASE
	162	!=====================================================================
	163	!
[3593]	164	#include "old_1D_decl_cases.h"
[3541]	165	!
	166	!---------------------------------------------------------------------
	167	! Declarations related to nudging
	168	!---------------------------------------------------------------------
	169	integer :: nudge_max
	170	parameter (nudge_max=9)
	171	integer :: inudge_RHT=1
	172	integer :: inudge_UV=2
	173	logical :: nudge(nudge_max)
	174	real :: t_targ(llm)
	175	real :: rh_targ(llm)
	176	real :: u_targ(llm)
	177	real :: v_targ(llm)
	178	!
	179	!---------------------------------------------------------------------
	180	! Declarations related to vertical discretization:
	181	!---------------------------------------------------------------------
	182	real :: pzero=1.e5
	183	real :: play (llm),zlay (llm),sig_s(llm),plev(llm+1)
	184	real :: playd(llm),zlayd(llm),ap_amma(llm+1),bp_amma(llm+1)
	185
	186	!---------------------------------------------------------------------
	187	! Declarations related to variables
	188	!---------------------------------------------------------------------
	189
	190	real :: phi(llm)
	191	real :: teta(llm),tetal(llm),temp(llm),u(llm),v(llm),w(llm)
	192	REAL rot(1, llm) ! relative vorticity, in s-1
	193	real :: rlat_rad(1),rlon_rad(1)
	194	real :: omega(llm+1),omega2(llm),rho(llm+1)
	195	real :: ug(llm),vg(llm),fcoriolis
	196	real :: sfdt, cfdt
	197	real :: du_phys(llm),dv_phys(llm),dt_phys(llm)
	198	real :: dt_dyn(llm)
	199	real :: dt_cooling(llm),d_t_adv(llm),d_t_nudge(llm)
	200	real :: d_u_nudge(llm),d_v_nudge(llm)
	201	real :: du_adv(llm),dv_adv(llm)
	202	real :: du_age(llm),dv_age(llm)
	203	real :: alpha
	204	real :: ttt
	205
	206	REAL, ALLOCATABLE, DIMENSION(:,:):: q
	207	REAL, ALLOCATABLE, DIMENSION(:,:):: dq
	208	REAL, ALLOCATABLE, DIMENSION(:,:):: dq_dyn
	209	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_adv
	210	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_nudge
	211	! REAL, ALLOCATABLE, DIMENSION(:):: d_th_adv
	212
	213	!---------------------------------------------------------------------
	214	! Initialization of surface variables
	215	!---------------------------------------------------------------------
	216	real :: run_off_lic_0(1)
	217	real :: fder(1),snsrf(1,nbsrf),qsurfsrf(1,nbsrf)
	218	real :: tsoil(1,nsoilmx,nbsrf)
	219	! real :: agesno(1,nbsrf)
	220
	221	!---------------------------------------------------------------------
	222	! Call to phyredem
	223	!---------------------------------------------------------------------
	224	logical :: ok_writedem =.true.
	225	real :: sollw_in = 0.
	226	real :: solsw_in = 0.
	227
	228	!---------------------------------------------------------------------
	229	! Call to physiq
	230	!---------------------------------------------------------------------
	231	logical :: firstcall=.true.
	232	logical :: lastcall=.false.
	233	real :: phis(1) = 0.0
	234	real :: dpsrf(1)
	235
	236	!---------------------------------------------------------------------
	237	! Initializations of boundary conditions
	238	!---------------------------------------------------------------------
	239	real, allocatable :: phy_nat (:) ! 0=ocean libre,1=land,2=glacier,3=banquise
	240	real, allocatable :: phy_alb (:) ! Albedo land only (old value condsurf_jyg=0.3)
	241	real, allocatable :: phy_sst (:) ! SST (will not be used; cf read_tsurf1d.F)
	242	real, allocatable :: phy_bil (:) ! Ne sert que pour les slab_ocean
	243	real, allocatable :: phy_rug (:) ! Longueur rugosite utilisee sur land only
	244	real, allocatable :: phy_ice (:) ! Fraction de glace
	245	real, allocatable :: phy_fter(:) ! Fraction de terre
	246	real, allocatable :: phy_foce(:) ! Fraction de ocean
	247	real, allocatable :: phy_fsic(:) ! Fraction de glace
	248	real, allocatable :: phy_flic(:) ! Fraction de glace
	249
	250	!---------------------------------------------------------------------
	251	! Fichiers et d'autres variables
	252	!---------------------------------------------------------------------
	253	integer :: k,l,i,it=1,mxcalc
	254	integer :: nsrf
	255	integer jcode
	256	INTEGER read_climoz
	257	!
	258	integer :: it_end ! iteration number of the last call
	259	!Al1
	260	integer ecrit_slab_oc !1=ecrit,-1=lit,0=no file
	261	data ecrit_slab_oc/-1/
	262	!
	263	! if flag_inhib_forcing = 0, tendencies of forcing are added
	264	! <> 0, tendencies of forcing are not added
	265	INTEGER :: flag_inhib_forcing = 0
	266
	267	!=====================================================================
	268	! INITIALIZATIONS
	269	!=====================================================================
	270	du_phys(:)=0.
	271	dv_phys(:)=0.
	272	dt_phys(:)=0.
	273	dt_dyn(:)=0.
	274	dt_cooling(:)=0.
	275	d_t_adv(:)=0.
	276	d_t_nudge(:)=0.
	277	d_u_nudge(:)=0.
	278	d_v_nudge(:)=0.
	279	du_adv(:)=0.
	280	dv_adv(:)=0.
	281	du_age(:)=0.
	282	dv_age(:)=0.
	283
	284	! Initialization of Common turb_forcing
	285	dtime_frcg = 0.
	286	Turb_fcg_gcssold=.false.
	287	hthturb_gcssold = 0.
	288	hqturb_gcssold = 0.
	289
	290
	291
	292
	293	!---------------------------------------------------------------------
	294	! OPTIONS OF THE 1D SIMULATION (lmdz1d.def => unicol.def)
	295	!---------------------------------------------------------------------
	296	!Al1
	297	call conf_unicol
	298	!Al1 moves this gcssold var from common fcg_gcssold to
	299	Turb_fcg_gcssold = xTurb_fcg_gcssold
	300	! --------------------------------------------------------------------
	301	close(1)
	302	!Al1
	303	write(,) 'lmdz1d.def lu => unicol.def'
	304
	305	! forcing_type defines the way the SCM is forced:
	306	!forcing_type = 0 ==> forcing_les = .true.
	307	! initial profiles from file prof.inp.001
	308	! no forcing by LS convergence ;
	309	! surface temperature imposed ;
	310	! radiative cooling may be imposed (iflag_radia=0 in physiq.def)
	311	!forcing_type = 1 ==> forcing_radconv = .true.
	312	! idem forcing_type = 0, but the imposed radiative cooling
	313	! is set to 0 (hence, if iflag_radia=0 in physiq.def,
	314	! then there is no radiative cooling at all)
	315	!forcing_type = 2 ==> forcing_toga = .true.
	316	! initial profiles from TOGA-COARE IFA files
	317	! LS convergence and SST imposed from TOGA-COARE IFA files
	318	!forcing_type = 3 ==> forcing_GCM2SCM = .true.
	319	! initial profiles from the GCM output
	320	! LS convergence imposed from the GCM output
	321	!forcing_type = 4 ==> forcing_twpice = .true.
	322	! initial profiles from TWP-ICE cdf file
	323	! LS convergence, omega and SST imposed from TWP-ICE files
	324	!forcing_type = 5 ==> forcing_rico = .true.
	325	! initial profiles from RICO files
	326	! LS convergence imposed from RICO files
	327	!forcing_type = 6 ==> forcing_amma = .true.
	328	! initial profiles from AMMA nc file
	329	! LS convergence, omega and surface fluxes imposed from AMMA file
	330	!forcing_type = 7 ==> forcing_dice = .true.
	331	! initial profiles and large scale forcings in dice_driver.nc
	332	! Different stages: soil model alone, atm. model alone
	333	! then both models coupled
	334	!forcing_type = 8 ==> forcing_gabls4 = .true.
	335	! initial profiles and large scale forcings in gabls4_driver.nc
	336	!forcing_type >= 100 ==> forcing_case = .true.
	337	! initial profiles and large scale forcings in cas.nc
	338	! LS convergence, omega and SST imposed from CINDY-DYNAMO files
	339	! 101=cindynamo
	340	! 102=bomex
	341	!forcing_type >= 100 ==> forcing_case2 = .true.
	342	! temporary flag while all the 1D cases are not whith the same cas.nc forcing file
	343	! 103=arm_cu2 ie arm_cu with new forcing format
	344	! 104=rico2 ie rico with new forcing format
	345	!forcing_type = 40 ==> forcing_GCSSold = .true.
	346	! initial profile from GCSS file
	347	! LS convergence imposed from GCSS file
	348	!forcing_type = 50 ==> forcing_fire = .true.
	349	! forcing from fire.nc
	350	!forcing_type = 59 ==> forcing_sandu = .true.
	351	! initial profiles from sanduref file: see prof.inp.001
	352	! SST varying with time and divergence constante: see ifa_sanduref.txt file
	353	! Radiation has to be computed interactively
	354	!forcing_type = 60 ==> forcing_astex = .true.
	355	! initial profiles from file: see prof.inp.001
	356	! SST,divergence,ug,vg,ufa,vfa varying with time : see ifa_astex.txt file
	357	! Radiation has to be computed interactively
	358	!forcing_type = 61 ==> forcing_armcu = .true.
	359	! initial profiles from file: see prof.inp.001
	360	! sensible and latent heat flux imposed: see ifa_arm_cu_1.txt
	361	! large scale advective forcing & radiative tendencies applied below 1000m: see ifa_arm_cu_2.txt
	362	! use geostrophic wind ug=10m/s vg=0m/s. Duration of the case 53100s
	363	! Radiation to be switched off
	364	!
	365	if (forcing_type <=0) THEN
	366	forcing_les = .true.
	367	elseif (forcing_type .eq.1) THEN
	368	forcing_radconv = .true.
	369	elseif (forcing_type .eq.2) THEN
	370	forcing_toga = .true.
	371	elseif (forcing_type .eq.3) THEN
	372	forcing_GCM2SCM = .true.
	373	elseif (forcing_type .eq.4) THEN
	374	forcing_twpice = .true.
	375	elseif (forcing_type .eq.5) THEN
	376	forcing_rico = .true.
	377	elseif (forcing_type .eq.6) THEN
	378	forcing_amma = .true.
	379	elseif (forcing_type .eq.7) THEN
	380	forcing_dice = .true.
	381	elseif (forcing_type .eq.8) THEN
	382	forcing_gabls4 = .true.
	383	elseif (forcing_type .eq.101) THEN ! Cindynamo starts 1-10-2011 0h
	384	forcing_case = .true.
	385	year_ini_cas=2011
	386	mth_ini_cas=10
	387	day_deb=1
	388	heure_ini_cas=0.
	389	pdt_cas=3*3600. ! forcing frequency
	390	elseif (forcing_type .eq.102) THEN ! Bomex starts 24-6-1969 0h
	391	forcing_case = .true.
	392	year_ini_cas=1969
	393	mth_ini_cas=6
	394	day_deb=24
	395	heure_ini_cas=0.
	396	pdt_cas=1800. ! forcing frequency
	397	elseif (forcing_type .eq.103) THEN ! Arm_cu starts 21-6-1997 11h30
	398	forcing_case2 = .true.
	399	year_ini_cas=1997
	400	mth_ini_cas=6
	401	day_deb=21
	402	heure_ini_cas=11.5
	403	pdt_cas=1800. ! forcing frequency
	404	elseif (forcing_type .eq.104) THEN ! rico starts 16-12-2004 0h
	405	forcing_case2 = .true.
	406	year_ini_cas=2004
	407	mth_ini_cas=12
	408	day_deb=16
	409	heure_ini_cas=0.
	410	pdt_cas=1800. ! forcing frequency
	411	elseif (forcing_type .eq.105) THEN ! bomex starts 16-12-2004 0h
	412	forcing_case2 = .true.
	413	year_ini_cas=1969
	414	mth_ini_cas=6
	415	day_deb=24
	416	heure_ini_cas=0.
	417	pdt_cas=1800. ! forcing frequency
	418	elseif (forcing_type .eq.106) THEN ! ayotte_24SC starts 6-11-1992 0h
	419	forcing_case2 = .true.
	420	year_ini_cas=1992
	421	mth_ini_cas=11
	422	day_deb=6
	423	heure_ini_cas=10.
	424	pdt_cas=86400. ! forcing frequency
	425	elseif (forcing_type .eq.113) THEN ! Arm_cu starts 21-6-1997 11h30
	426	forcing_SCM = .true.
	427	year_ini_cas=1997
	428	! It is possible that those parameters are run twice.
	429	call getin('anneeref',year_ini_cas)
	430	call getin('dayref',day_deb)
	431	mth_ini_cas=1 ! pour le moment on compte depuis le debut de l'annee
	432	call getin('time_ini',heure_ini_cas)
	433	elseif (forcing_type .eq.40) THEN
	434	forcing_GCSSold = .true.
	435	elseif (forcing_type .eq.50) THEN
	436	forcing_fire = .true.
	437	elseif (forcing_type .eq.59) THEN
	438	forcing_sandu = .true.
	439	elseif (forcing_type .eq.60) THEN
	440	forcing_astex = .true.
	441	elseif (forcing_type .eq.61) THEN
	442	forcing_armcu = .true.
	443	IF(llm.NE.19.AND.llm.NE.40) stop 'Erreur nombre de niveaux !!'
	444	else
	445	write (,) 'ERROR : unknown forcing_type ', forcing_type
	446	stop 'Forcing_type should be 0,1,2,3,4,5,6 or 40,59,60,61'
	447	ENDIF
	448	print*,"forcing type=",forcing_type
	449
	450	! if type_ts_forcing=0, the surface temp of 1D simulation is constant in time
	451	! (specified by tsurf in lmdz1d.def); if type_ts_forcing=1, the surface temperature
	452	! varies in time according to a forcing (e.g. forcing_toga) and is passed to read_tsurf1d.F
	453	! through the common sst_forcing.
	454
	455	type_ts_forcing = 0
	456	if (forcing_toga.or.forcing_sandu.or.forcing_astex .or. forcing_dice) &
	457	& type_ts_forcing = 1
	458	!
	459	! Initialization of the logical switch for nudging
	460	jcode = iflag_nudge
	461	do i = 1,nudge_max
	462	nudge(i) = mod(jcode,10) .ge. 1
	463	jcode = jcode/10
	464	enddo
	465	!---------------------------------------------------------------------
	466	! Definition of the run
	467	!---------------------------------------------------------------------
	468
	469	call conf_gcm( 99, .TRUE. )
	470
	471	!-----------------------------------------------------------------------
	472	allocate( phy_nat (year_len)) ! 0=ocean libre,1=land,2=glacier,3=banquise
	473	phy_nat(:)=0.0
	474	allocate( phy_alb (year_len)) ! Albedo land only (old value condsurf_jyg=0.3)
	475	allocate( phy_sst (year_len)) ! SST (will not be used; cf read_tsurf1d.F)
	476	allocate( phy_bil (year_len)) ! Ne sert que pour les slab_ocean
	477	phy_bil(:)=1.0
	478	allocate( phy_rug (year_len)) ! Longueur rugosite utilisee sur land only
	479	allocate( phy_ice (year_len)) ! Fraction de glace
	480	phy_ice(:)=0.0
	481	allocate( phy_fter(year_len)) ! Fraction de terre
	482	phy_fter(:)=0.0
	483	allocate( phy_foce(year_len)) ! Fraction de ocean
	484	phy_foce(:)=0.0
	485	allocate( phy_fsic(year_len)) ! Fraction de glace
	486	phy_fsic(:)=0.0
	487	allocate( phy_flic(year_len)) ! Fraction de glace
	488	phy_flic(:)=0.0
	489	!-----------------------------------------------------------------------
	490	! Choix du calendrier
	491	! -------------------
	492
	493	! calend = 'earth_365d'
	494	if (calend == 'earth_360d') then
	495	call ioconf_calendar('360d')
	496	write(,)'CALENDRIER CHOISI: Terrestre a 360 jours/an'
	497	else if (calend == 'earth_365d') then
	498	call ioconf_calendar('noleap')
	499	write(,)'CALENDRIER CHOISI: Terrestre a 365 jours/an'
	500	else if (calend == 'earth_366d') then
	501	call ioconf_calendar('all_leap')
	502	write(,)'CALENDRIER CHOISI: Terrestre bissextile'
	503	else if (calend == 'gregorian') then
	504	stop 'gregorian calend should not be used by normal user'
	505	call ioconf_calendar('gregorian') ! not to be used by normal users
	506	write(,)'CALENDRIER CHOISI: Gregorien'
	507	else
	508	write (,) 'ERROR : unknown calendar ', calend
	509	stop 'calend should be 360d,earth_365d,earth_366d,gregorian'
	510	endif
	511	!-----------------------------------------------------------------------
	512	!
	513	!c Date :
	514	! La date est supposee donnee sous la forme [annee, numero du jour dans
	515	! l annee] ; l heure est donnee dans time_ini, lu dans lmdz1d.def.
	516	! On appelle ymds2ju pour convertir [annee, jour] en [jour Julien].
	517	! Le numero du jour est dans "day". L heure est traitee separement.
	518	! La date complete est dans "daytime" (l'unite est le jour).
	519	if (nday>0) then
	520	fnday=nday
	521	else
	522	fnday=-nday/float(day_step)
	523	endif
	524	print *,'fnday=',fnday
	525	! start_time doit etre en FRACTION DE JOUR
	526	start_time=time_ini/24.
	527
	528	! Special case for arm_cu which lasts less than one day : 53100s !! (MPL 20111026)
	529	IF(forcing_type .EQ. 61) fnday=53100./86400.
	530	IF(forcing_type .EQ. 103) fnday=53100./86400.
	531	! Special case for amma which lasts less than one day : 64800s !! (MPL 20120216)
	532	IF(forcing_type .EQ. 6) fnday=64800./86400.
	533	! IF(forcing_type .EQ. 6) fnday=50400./86400.
	534	IF(forcing_type .EQ. 8 ) fnday=129600./86400.
	535	annee_ref = anneeref
	536	mois = 1
	537	day_ref = dayref
	538	heure = 0.
	539	itau_dyn = 0
	540	itau_phy = 0
	541	call ymds2ju(annee_ref,mois,day_ref,heure,day)
	542	day_ini = int(day)
	543	day_end = day_ini + int(fnday)
	544
	545	IF (forcing_type .eq.2) THEN
	546	! Convert the initial date of Toga-Coare to Julian day
	547	call ymds2ju &
	548	& (year_ini_toga,mth_ini_toga,day_ini_toga,heure,day_ju_ini_toga)
	549
	550	ELSEIF (forcing_type .eq.4) THEN
	551	! Convert the initial date of TWPICE to Julian day
	552	call ymds2ju &
	553	& (year_ini_twpi,mth_ini_twpi,day_ini_twpi,heure_ini_twpi &
	554	& ,day_ju_ini_twpi)
	555	ELSEIF (forcing_type .eq.6) THEN
	556	! Convert the initial date of AMMA to Julian day
	557	call ymds2ju &
	558	& (year_ini_amma,mth_ini_amma,day_ini_amma,heure_ini_amma &
	559	& ,day_ju_ini_amma)
	560	ELSEIF (forcing_type .eq.7) THEN
	561	! Convert the initial date of DICE to Julian day
	562	call ymds2ju &
	563	& (year_ini_dice,mth_ini_dice,day_ini_dice,heure_ini_dice &
	564	& ,day_ju_ini_dice)
	565	ELSEIF (forcing_type .eq.8 ) THEN
	566	! Convert the initial date of GABLS4 to Julian day
	567	call ymds2ju &
	568	& (year_ini_gabls4,mth_ini_gabls4,day_ini_gabls4,heure_ini_gabls4 &
	569	& ,day_ju_ini_gabls4)
	570	ELSEIF (forcing_type .gt.100) THEN
	571	! Convert the initial date to Julian day
	572	day_ini_cas=day_deb
	573	print*,'time case',year_ini_cas,mth_ini_cas,day_ini_cas
	574	call ymds2ju &
	575	& (year_ini_cas,mth_ini_cas,day_ini_cas,heure_ini_cas*3600 &
	576	& ,day_ju_ini_cas)
	577	print*,'time case 2',day_ini_cas,day_ju_ini_cas
	578	ELSEIF (forcing_type .eq.59) THEN
	579	! Convert the initial date of Sandu case to Julian day
	580	call ymds2ju &
	581	& (year_ini_sandu,mth_ini_sandu,day_ini_sandu, &
	582	& time_ini*3600.,day_ju_ini_sandu)
	583
	584	ELSEIF (forcing_type .eq.60) THEN
	585	! Convert the initial date of Astex case to Julian day
	586	call ymds2ju &
	587	& (year_ini_astex,mth_ini_astex,day_ini_astex, &
	588	& time_ini*3600.,day_ju_ini_astex)
	589
	590	ELSEIF (forcing_type .eq.61) THEN
	591	! Convert the initial date of Arm_cu case to Julian day
	592	call ymds2ju &
	593	& (year_ini_armcu,mth_ini_armcu,day_ini_armcu,heure_ini_armcu &
	594	& ,day_ju_ini_armcu)
	595	ENDIF
	596
	597	IF (forcing_type .gt.100) THEN
	598	daytime = day + heure_ini_cas/24. ! 1st day and initial time of the simulation
	599	ELSE
	600	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
	601	ENDIF
	602	! Print out the actual date of the beginning of the simulation :
	603	call ju2ymds(daytime,year_print, month_print,day_print,sec_print)
	604	print *,' Time of beginning : ', &
	605	& year_print, month_print, day_print, sec_print
	606
	607	!---------------------------------------------------------------------
	608	! Initialization of dimensions, geometry and initial state
	609	!---------------------------------------------------------------------
	610	! call init_phys_lmdz(1,1,llm,1,(/1/)) ! job now done via iniphysiq
	611	! but we still need to initialize dimphy module (klon,klev,etc.) here.
	612	call init_dimphy1D(1,llm)
	613	call suphel
	614	call infotrac_init
	615
	616	if (nqtot>nqmx) STOP 'Augmenter nqmx dans lmdz1d.F'
	617	allocate(q(llm,nqtot)) ; q(:,:)=0.
	618	allocate(dq(llm,nqtot))
	619	allocate(dq_dyn(llm,nqtot))
	620	allocate(d_q_adv(llm,nqtot))
	621	allocate(d_q_nudge(llm,nqtot))
	622	! allocate(d_th_adv(llm))
	623
	624	q(:,:) = 0.
	625	dq(:,:) = 0.
	626	dq_dyn(:,:) = 0.
	627	d_q_adv(:,:) = 0.
	628	d_q_nudge(:,:) = 0.
	629
	630	!
	631	! No ozone climatology need be read in this pre-initialization
	632	! (phys_state_var_init is called again in physiq)
	633	read_climoz = 0
[3781]	634	nsw=6 ! EV et LF: sinon, falb_dir et falb_dif ne peuvent etre alloues
	635
	636
[3541]	637	call phys_state_var_init(read_climoz)
	638
	639	if (ngrid.ne.klon) then
	640	print*,'stop in inifis'
	641	print*,'Probleme de dimensions :'
	642	print*,'ngrid = ',ngrid
	643	print*,'klon = ',klon
	644	stop
	645	endif
	646	!!!=====================================================================
	647	!!! Feedback forcing values for Gateaux differentiation (al1)
	648	!!!=====================================================================
	649	!!! Surface Planck forcing bracketing call radiation
	650	!! surf_Planck = 0.
	651	!! surf_Conv = 0.
	652	!! write(,) 'Gateaux-dif Planck,Conv:',surf_Planck,surf_Conv
	653	!!! a mettre dans le lmdz1d.def ou autre
	654	!!
	655	!!
	656	qsol = qsolinp
	657	qsurf = fq_sat(tsurf,psurf/100.)
	658	day1= day_ini
	659	time=daytime-day
	660	ts_toga(1)=tsurf ! needed by read_tsurf1d.F
	661	rho(1)=psurf/(rdtsurf(1.+(rv/rd-1.)*qsurf))
	662
	663	!
	664	!! mpl et jyg le 22/08/2012 :
	665	!! pour que les cas a flux de surface imposes marchent
	666	IF(.NOT.ok_flux_surf.or.max(abs(wtsurf),abs(wqsurf))>0.) THEN
	667	fsens=-wtsurfrcpdrho(1)
	668	flat=-wqsurfrlvttrho(1)
	669	print *,'Flux: ok_flux wtsurf wqsurf',ok_flux_surf,wtsurf,wqsurf
	670	ENDIF
	671	print*,'Flux sol ',fsens,flat
	672	!! ok_flux_surf=.false.
	673	!! fsens=-wtsurfrcpdrho(1)
	674	!! flat=-wqsurfrlvttrho(1)
	675	!!!!
	676
	677	! Vertical discretization and pressure levels at half and mid levels:
	678
	679	pa = 5e4
	680	!! preff= 1.01325e5
	681	preff = psurf
	682	IF (ok_old_disvert) THEN
	683	call disvert0(pa,preff,ap,bp,dpres,presnivs,nivsigs,nivsig)
	684	print *,'On utilise disvert0'
	685	aps(1:llm)=0.5*(ap(1:llm)+ap(2:llm+1))
	686	bps(1:llm)=0.5*(bp(1:llm)+bp(2:llm+1))
	687	scaleheight=8.
	688	pseudoalt(1:llm)=-scaleheight*log(presnivs(1:llm)/preff)
	689	ELSE
	690	call disvert()
	691	print *,'On utilise disvert'
	692	! Nouvelle version disvert permettant d imposer ap,bp (modif L.Guez) MPL 18092012
	693	! Dans ce cas, on lit ap,bp dans le fichier hybrid.txt
	694	ENDIF
	695
	696	sig_s=presnivs/preff
	697	plev =ap+bp*psurf
	698	play = 0.5*(plev(1:llm)+plev(2:llm+1))
	699	zlay=-rd300.log(play/psurf)/rg ! moved after reading profiles
	700
	701	IF (forcing_type .eq. 59) THEN
	702	! pour forcing_sandu, on cherche l'indice le plus proche de 700hpa#3000m
	703	write(,) '***********************'
	704	do l = 1, llm
	705	write(,) 'l,play(l),presnivs(l): ',l,play(l),presnivs(l)
	706	if (trouve_700 .and. play(l).le.70000) then
	707	llm700=l
	708	print *,'llm700,play=',llm700,play(l)/100.
	709	trouve_700= .false.
	710	endif
	711	enddo
	712	write(,) '***********************'
	713	ENDIF
	714
	715	!
	716	!=====================================================================
	717	! EVENTUALLY, READ FORCING DATA :
	718	!=====================================================================
	719
	720	#include "old_1D_read_forc_cases.h"
	721
	722	if (forcing_GCM2SCM) then
	723	write (,) 'forcing_GCM2SCM not yet implemented'
	724	stop 'in initialization'
	725	endif ! forcing_GCM2SCM
	726
	727	print*,'mxcalc=',mxcalc
	728	! print*,'zlay=',zlay(mxcalc)
	729	print*,'play=',play(mxcalc)
	730
	731	!Al1 pour SST forced, appell?? depuis ocean_forced_noice
[3780]	732	! EV tg instead of ts_cur
	733
	734	tg = tsurf ! SST used in read_tsurf1d
[3541]	735	!=====================================================================
	736	! Initialisation de la physique :
	737	!=====================================================================
	738
	739	! Rq: conf_phys.F90 lit tous les flags de physiq.def; conf_phys appele depuis physiq.F
	740	!
	741	! day_step, iphysiq lus dans gcm.def ci-dessus
	742	! timestep: calcule ci-dessous from rday et day_step
	743	! ngrid=1
	744	! llm: defini dans .../modipsl/modeles/LMDZ4/libf/grid/dimension
	745	! rday: defini dans suphel.F (86400.)
	746	! day_ini: lu dans run.def (dayref)
	747	! rlat_rad,rlon-rad: transformes en radian de rlat,rlon lus dans lmdz1d.def (en degres)
	748	! airefi,zcufi,zcvfi initialises au debut de ce programme
	749	! rday,ra,rg,rd,rcpd declares dans YOMCST.h et calcules dans suphel.F
	750	day_step = float(nsplit_phys)*day_step/float(iphysiq)
	751	write (,) 'Time step divided by nsplit_phys (=',nsplit_phys,')'
	752	timestep =rday/day_step
	753	dtime_frcg = timestep
	754	!
	755	zcufi=airefi
	756	zcvfi=airefi
	757	!
	758	rlat_rad(1)=xlat*rpi/180.
	759	rlon_rad(1)=xlon*rpi/180.
	760
	761	! iniphysiq will call iniaqua who needs year_len from phys_cal_mod
	762	year_len_phys_cal_mod=year_len
	763
	764	! Ehouarn: iniphysiq requires arrays related to (3D) dynamics grid,
	765	! e.g. for cell boundaries, which are meaningless in 1D; so pad these
	766	! with '0.' when necessary
	767	call iniphysiq(iim,jjm,llm, &
	768	1,comm_lmdz, &
	769	rday,day_ini,timestep, &
	770	(/rlat_rad(1),0./),(/0./), &
	771	(/0.,0./),(/rlon_rad(1),0./), &
	772	(/ (/airefi,0./),(/0.,0./) /), &
	773	(/zcufi,0.,0.,0./), &
	774	(/zcvfi,0./), &
	775	ra,rg,rd,rcpd,1)
	776	print*,'apres iniphysiq'
	777
	778	! 2 PARAMETRES QUI DEVRAIENT ETRE LUS DANS run.def MAIS NE LE SONT PAS ICI:
	779	co2_ppm= 330.0
	780	solaire=1370.0
	781
	782	! Ecriture du startphy avant le premier appel a la physique.
	783	! On le met juste avant pour avoir acces a tous les champs
	784
	785	if (ok_writedem) then
	786
	787	!--------------------------------------------------------------------------
	788	! pbl_surface_init (called here) and pbl_surface_final (called by phyredem)
	789	! need : qsol fder snow qsurf evap rugos agesno ftsoil
	790	!--------------------------------------------------------------------------
	791
	792	type_ocean = "force"
	793	run_off_lic_0(1) = restart_runoff
	794	call fonte_neige_init(run_off_lic_0)
	795
	796	fder=0.
[3780]	797	print *, 'snsrf', snsrf
[3541]	798	snsrf(1,:)=snowmass ! masse de neige des sous surface
	799	qsurfsrf(1,:)=qsurf ! humidite de l'air des sous surface
	800	fevap=0.
	801	z0m(1,:)=rugos ! couverture de neige des sous surface
	802	z0h(1,:)=rugosh ! couverture de neige des sous surface
	803	agesno = xagesno
	804	tsoil(:,:,:)=tsurf
	805	!------ AMMA 2e run avec modele sol et rayonnement actif (MPL 23052012)
	806	! tsoil(1,1,1)=299.18
	807	! tsoil(1,2,1)=300.08
	808	! tsoil(1,3,1)=301.88
	809	! tsoil(1,4,1)=305.48
	810	! tsoil(1,5,1)=308.00
	811	! tsoil(1,6,1)=308.00
	812	! tsoil(1,7,1)=308.00
	813	! tsoil(1,8,1)=308.00
	814	! tsoil(1,9,1)=308.00
	815	! tsoil(1,10,1)=308.00
	816	! tsoil(1,11,1)=308.00
	817	!-----------------------------------------------------------------------
	818	call pbl_surface_init(fder, snsrf, qsurfsrf, tsoil)
	819
	820	!------------------ prepare limit conditions for limit.nc -----------------
	821	!-- Ocean force
	822
	823	print*,'avant phyredem'
	824	pctsrf(1,:)=0.
	825	if (nat_surf.eq.0.) then
	826	pctsrf(1,is_oce)=1.
	827	pctsrf(1,is_ter)=0.
	828	pctsrf(1,is_lic)=0.
	829	pctsrf(1,is_sic)=0.
	830	else if (nat_surf .eq. 1) then
	831	pctsrf(1,is_oce)=0.
	832	pctsrf(1,is_ter)=1.
	833	pctsrf(1,is_lic)=0.
	834	pctsrf(1,is_sic)=0.
	835	else if (nat_surf .eq. 2) then
	836	pctsrf(1,is_oce)=0.
	837	pctsrf(1,is_ter)=0.
	838	pctsrf(1,is_lic)=1.
	839	pctsrf(1,is_sic)=0.
	840	else if (nat_surf .eq. 3) then
	841	pctsrf(1,is_oce)=0.
	842	pctsrf(1,is_ter)=0.
	843	pctsrf(1,is_lic)=0.
	844	pctsrf(1,is_sic)=1.
	845
	846	end if
	847
	848	print*,'nat_surf,pctsrf(1,is_oce),pctsrf(1,is_ter)',nat_surf &
	849	& ,pctsrf(1,is_oce),pctsrf(1,is_ter)
	850
	851	zmasq=pctsrf(1,is_ter)+pctsrf(1,is_lic)
	852	zpic = zpicinp
	853	ftsol=tsurf
	854	falb_dir=albedo
	855	falb_dif=albedo
	856	rugoro=rugos
	857	t_ancien(1,:)=temp(:)
	858	q_ancien(1,:)=q(:,1)
	859	ql_ancien = 0.
	860	qs_ancien = 0.
	861	prlw_ancien = 0.
	862	prsw_ancien = 0.
	863	prw_ancien = 0.
	864	!jyg<
	865	!! pbl_tke(:,:,:)=1.e-8
	866	pbl_tke(:,:,:)=0.
	867	pbl_tke(:,2,:)=1.e-2
	868	PRINT *, ' pbl_tke dans lmdz1d '
	869	if (prt_level .ge. 5) then
	870	DO nsrf = 1,4
	871	PRINT *,'pbl_tke(1,:,',nsrf,') ',pbl_tke(1,:,nsrf)
	872	ENDDO
	873	end if
	874
	875	!>jyg
	876
	877	rain_fall=0.
	878	snow_fall=0.
	879	solsw=0.
	880	sollw=0.
	881	sollwdown=rsigmatsurf*4
	882	radsol=0.
	883	rnebcon=0.
	884	ratqs=0.
	885	clwcon=0.
	886	zmax0 = 0.
	887	zmea=0.
	888	zstd=0.
	889	zsig=0.
	890	zgam=0.
	891	zval=0.
	892	zthe=0.
	893	sig1=0.
	894	w01=0.
	895	wake_cstar = 0.
	896	wake_deltaq = 0.
	897	wake_deltat = 0.
	898	wake_delta_pbl_TKE(:,:,:) = 0.
	899	delta_tsurf = 0.
	900	wake_fip = 0.
	901	wake_pe = 0.
	902	wake_s = 0.
	903	wake_dens = 0.
	904	ale_bl = 0.
	905	ale_bl_trig = 0.
	906	alp_bl = 0.
	907	IF (ALLOCATED(du_gwd_rando)) du_gwd_rando = 0.
	908	IF (ALLOCATED(du_gwd_front)) du_gwd_front = 0.
	909	entr_therm = 0.
	910	detr_therm = 0.
	911	f0 = 0.
	912	fm_therm = 0.
	913	u_ancien(1,:)=u(:)
	914	v_ancien(1,:)=v(:)
[3575]	915
[3780]	916	u10m=0.
	917	v10m=0.
	918	ale_wake=0.
	919	ale_bl_stat=0.
[3541]	920
	921	!------------------------------------------------------------------------
	922	! Make file containing restart for the physics (startphy.nc)
	923	!
	924	! NB: List of the variables to be written by phyredem (via put_field):
	925	! rlon,rlat,zmasq,pctsrf(:,is_ter),pctsrf(:,is_lic),pctsrf(:,is_oce)
	926	! pctsrf(:,is_sic),ftsol(:,nsrf),tsoil(:,isoil,nsrf),qsurf(:,nsrf)
	927	! qsol,falb_dir(:,nsrf),falb_dif(:,nsrf),evap(:,nsrf),snow(:,nsrf)
	928	! radsol,solsw,sollw, sollwdown,fder,rain_fall,snow_fall,frugs(:,nsrf)
	929	! agesno(:,nsrf),zmea,zstd,zsig,zgam,zthe,zpic,zval,rugoro
	930	! t_ancien,q_ancien,,frugs(:,is_oce),clwcon(:,1),rnebcon(:,1),ratqs(:,1)
	931	! run_off_lic_0,pbl_tke(:,1:klev,nsrf), zmax0,f0,sig1,w01
	932	! wake_deltat,wake_deltaq,wake_s,wake_dens,wake_cstar,
	933	! wake_fip,wake_delta_pbl_tke(:,1:klev,nsrf)
	934	!
	935	! NB2: The content of the startphy.nc file depends on some flags defined in
	936	! the ".def" files. However, since conf_phys is not called in lmdz1d.F90, these flags have
	937	! to be set at some arbitratry convenient values.
	938	!------------------------------------------------------------------------
	939	!Al1 =============== restart option ==========================
	940	if (.not.restart) then
	941	iflag_pbl = 5
	942	call phyredem ("startphy.nc")
	943	else
	944	! (desallocations)
	945	print*,'callin surf final'
	946	call pbl_surface_final( fder, snsrf, qsurfsrf, tsoil)
	947	print*,'after surf final'
	948	CALL fonte_neige_final(run_off_lic_0)
	949	endif
	950
	951	ok_writedem=.false.
	952	print*,'apres phyredem'
	953
	954	endif ! ok_writedem
	955
	956	!------------------------------------------------------------------------
	957	! Make file containing boundary conditions (limit.nc) Al1->restartdyn*
	958	! --------------------------------------------------
	959	! NB: List of the variables to be written in limit.nc
	960	! (by writelim.F, subroutine of 1DUTILS.h):
	961	! phy_nat,phy_alb,phy_sst,phy_bil,phy_rug,phy_ice,
	962	! phy_fter,phy_foce,phy_flic,phy_fsic)
	963	!------------------------------------------------------------------------
	964	do i=1,year_len
	965	phy_nat(i) = nat_surf
	966	phy_alb(i) = albedo
	967	phy_sst(i) = tsurf ! read_tsurf1d will be used instead
	968	phy_rug(i) = rugos
	969	phy_fter(i) = pctsrf(1,is_ter)
	970	phy_foce(i) = pctsrf(1,is_oce)
	971	phy_fsic(i) = pctsrf(1,is_sic)
	972	phy_flic(i) = pctsrf(1,is_lic)
	973	enddo
	974
	975	! fabrication de limit.nc
	976	call writelim (1,phy_nat,phy_alb,phy_sst,phy_bil,phy_rug, &
	977	& phy_ice,phy_fter,phy_foce,phy_flic,phy_fsic)
	978
	979
	980	call phys_state_var_end
	981	!Al1
	982	if (restart) then
	983	print*,'call to restart dyn 1d'
	984	Call dyn1deta0("start1dyn.nc",plev,play,phi,phis,presnivs, &
	985	& u,v,temp,q,omega2)
	986
	987	print*,'fnday,annee_ref,day_ref,day_ini', &
	988	& fnday,annee_ref,day_ref,day_ini
	989	!** call ymds2ju(annee_ref,mois,day_ini,heure,day)
	990	day = day_ini
	991	day_end = day_ini + nday
	992	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
	993
	994	! Print out the actual date of the beginning of the simulation :
	995	call ju2ymds(daytime, an, mois, jour, heure)
	996	print *,' Time of beginning : y m d h',an, mois,jour,heure/3600.
	997
	998	day = int(daytime)
	999	time=daytime-day
	1000
	1001	print,'*** intialised fields from restart1dyn *****'
	1002	print*,'plev,play,phi,phis,presnivs,u,v,temp,q,omega2'
	1003	print*,'temp(1),q(1,1),u(1),v(1),plev(1),phis :'
	1004	print*,temp(1),q(1,1),u(1),v(1),plev(1),phis
	1005	! raz for safety
	1006	do l=1,llm
	1007	dq_dyn(l,1) = 0.
	1008	enddo
	1009	endif
	1010	!Al1 ================ end restart =================================
	1011	IF (ecrit_slab_oc.eq.1) then
	1012	open(97,file='div_slab.dat',STATUS='UNKNOWN')
	1013	elseif (ecrit_slab_oc.eq.0) then
	1014	open(97,file='div_slab.dat',STATUS='OLD')
	1015	endif
	1016	!
	1017	!---------------------------------------------------------------------
	1018	! Initialize target profile for RHT nudging if needed
	1019	!---------------------------------------------------------------------
	1020	if (nudge(inudge_RHT)) then
	1021	call nudge_RHT_init(plev,play,temp,q(:,1),t_targ,rh_targ)
	1022	endif
	1023	if (nudge(inudge_UV)) then
	1024	call nudge_UV_init(plev,play,u,v,u_targ,v_targ)
	1025	endif
	1026	!
	1027	!=====================================================================
	1028	CALL iophys_ini
	1029	! START OF THE TEMPORAL LOOP :
	1030	!=====================================================================
	1031
	1032	it_end = nint(fnday*day_step)
	1033	!test JLD it_end = 10
	1034	do while(it.le.it_end)
	1035
	1036	if (prt_level.ge.1) then
	1037	print*,'XXXXXXXXXXXXXXXXXXX ITAP,day,time=', &
	1038	& it,day,time,it_end,day_step
	1039	print*,'PAS DE TEMPS ',timestep
	1040	endif
	1041	!Al1 demande de restartphy.nc
	1042	if (it.eq.it_end) lastcall=.True.
	1043
	1044	!---------------------------------------------------------------------
	1045	! Interpolation of forcings in time and onto model levels
	1046	!---------------------------------------------------------------------
	1047
	1048	#include "old_1D_interp_cases.h"
	1049
	1050	if (forcing_GCM2SCM) then
	1051	write (,) 'forcing_GCM2SCM not yet implemented'
	1052	stop 'in time loop'
	1053	endif ! forcing_GCM2SCM
	1054
	1055	!---------------------------------------------------------------------
	1056	! Geopotential :
	1057	!---------------------------------------------------------------------
	1058
	1059	phi(1)=RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
	1060	do l = 1, llm-1
	1061	phi(l+1)=phi(l)+RD(temp(l)+temp(l+1)) &
	1062	& (play(l)-play(l+1))/(play(l)+play(l+1))
	1063	enddo
	1064
	1065	!---------------------------------------------------------------------
	1066	! Listing output for debug prt_level>=1
	1067	!---------------------------------------------------------------------
	1068	if (prt_level>=1) then
	1069	print *,' avant physiq : -------- day time ',day,time
	1070	write(,) 'firstcall,lastcall,phis', &
	1071	& firstcall,lastcall,phis
	1072	end if
	1073	if (prt_level>=5) then
	1074	write(*,'(a10,2a4,4a13)') 'BEFOR1 IT=','it','l', &
	1075	& 'presniv','plev','play','phi'
	1076	write(*,'(a10,2i4,4f13.2)') ('BEFOR1 IT= ',it,l, &
	1077	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
	1078	write(*,'(a11,2a4,a11,6a8)') 'BEFOR2','it','l', &
	1079	& 'presniv','u','v','temp','q1','q2','omega2'
	1080	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('BEFOR2 IT= ',it,l, &
	1081	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
	1082	endif
	1083
	1084	!---------------------------------------------------------------------
	1085	! Call physiq :
	1086	!---------------------------------------------------------------------
	1087	call physiq(ngrid,llm, &
	1088	firstcall,lastcall,timestep, &
	1089	plev,play,phi,phis,presnivs, &
	1090	u,v, rot, temp,q,omega2, &
	1091	du_phys,dv_phys,dt_phys,dq,dpsrf)
	1092	firstcall=.false.
	1093
	1094	!---------------------------------------------------------------------
	1095	! Listing output for debug
	1096	!---------------------------------------------------------------------
	1097	if (prt_level>=5) then
	1098	write(*,'(a11,2a4,4a13)') 'AFTER1 IT=','it','l', &
	1099	& 'presniv','plev','play','phi'
	1100	write(*,'(a11,2i4,4f13.2)') ('AFTER1 it= ',it,l, &
	1101	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
	1102	write(*,'(a11,2a4,a11,6a8)') 'AFTER2','it','l', &
	1103	& 'presniv','u','v','temp','q1','q2','omega2'
	1104	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('AFTER2 it= ',it,l, &
	1105	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
	1106	write(*,'(a11,2a4,a11,5a8)') 'AFTER3','it','l', &
	1107	& 'presniv','du_phys','dv_phys','dt_phys','dq1','dq2'
	1108	write(*,'(a11,2i4,f11.2,5f8.2)') ('AFTER3 it= ',it,l, &
	1109	& presnivs(l),86400du_phys(l),86400dv_phys(l), &
	1110	& 86400dt_phys(l),86400dq(l,1),dq(l,2),l=1,llm)
	1111	write(,) 'dpsrf',dpsrf
	1112	endif
	1113	!---------------------------------------------------------------------
	1114	! Add physical tendencies :
	1115	!---------------------------------------------------------------------
	1116
	1117	fcoriolis=2.sin(rpixlat/180.)*romega
	1118	if (forcing_radconv .or. forcing_fire) then
	1119	fcoriolis=0.0
	1120	dt_cooling=0.0
	1121	d_t_adv=0.0
	1122	d_q_adv=0.0
	1123	endif
	1124	! print*, 'calcul de fcoriolis ', fcoriolis
	1125
	1126	if (forcing_toga .or. forcing_GCSSold .or. forcing_twpice &
	1127	& .or.forcing_amma .or. forcing_type.eq.101) then
	1128	fcoriolis=0.0 ; ug=0. ; vg=0.
	1129	endif
	1130
	1131	if(forcing_rico) then
	1132	dt_cooling=0.
	1133	endif
	1134
	1135	!CRio:Attention modif sp??cifique cas de Caroline
	1136	if (forcing_type==-1) then
	1137	fcoriolis=0.
	1138	!Nudging
	1139
	1140	!on calcule dt_cooling
	1141	do l=1,llm
	1142	if (play(l).ge.20000.) then
	1143	dt_cooling(l)=-1.5/86400.
	1144	elseif ((play(l).ge.10000.).and.((play(l).lt.20000.))) then
	1145	dt_cooling(l)=-1.5/86400.(play(l)-10000.)/(10000.)-1./86400.(20000.-play(l))/10000.*(temp(l)-200.)
	1146	else
	1147	dt_cooling(l)=-1.*(temp(l)-200.)/86400.
	1148	endif
	1149	enddo
	1150
	1151	endif
	1152	!RC
	1153	if (forcing_sandu) then
	1154	ug(1:llm)=u_mod(1:llm)
	1155	vg(1:llm)=v_mod(1:llm)
	1156	endif
	1157
	1158	IF (prt_level >= 5) print*, 'fcoriolis, xlat,mxcalc ', &
	1159	fcoriolis, xlat,mxcalc
	1160
	1161	! print *,'u-ug=',u-ug
	1162
	1163	!!!!!!!!!!!!!!!!!!!!!!!!
	1164	! Geostrophic wind
	1165	! Le calcul ci dessous est insuffisamment precis
	1166	! du_age(1:mxcalc)=fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
	1167	! dv_age(1:mxcalc)=-fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
	1168	!!!!!!!!!!!!!!!!!!!!!!!!
	1169	sfdt = sin(0.5fcoriolistimestep)
	1170	cfdt = cos(0.5fcoriolistimestep)
	1171	! print *,'fcoriolis,sfdt,cfdt,timestep',fcoriolis,sfdt,cfdt,timestep
	1172	!
	1173	du_age(1:mxcalc)= -2.sfdt/timestep &
	1174	& (sfdt*(u(1:mxcalc)-ug(1:mxcalc)) - &
	1175	& cfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
	1176	!! : fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
	1177	!
	1178	dv_age(1:mxcalc)= -2.sfdt/timestep &
	1179	& (cfdt*(u(1:mxcalc)-ug(1:mxcalc)) + &
	1180	& sfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
	1181	!! : -fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
	1182	!
	1183	!!!!!!!!!!!!!!!!!!!!!!!!
	1184	! Nudging
	1185	!!!!!!!!!!!!!!!!!!!!!!!!
	1186	d_t_nudge(:) = 0.
	1187	d_q_nudge(:,:) = 0.
	1188	d_u_nudge(:) = 0.
	1189	d_v_nudge(:) = 0.
	1190	if (nudge(inudge_RHT)) then
	1191	call nudge_RHT(timestep,plev,play,t_targ,rh_targ,temp,q(:,1), &
	1192	& d_t_nudge,d_q_nudge(:,1))
	1193	endif
	1194	if (nudge(inudge_UV)) then
	1195	call nudge_UV(timestep,plev,play,u_targ,v_targ,u,v, &
	1196	& d_u_nudge,d_v_nudge)
	1197	endif
	1198	!
	1199	if (forcing_fire) THEN
	1200
	1201	!let ww=if ( alt le 1100 ) then alt*-0.00001 else 0
	1202	!let wt=if ( alt le 1100 ) then min( -3.75e-5 , -7.5e-8*alt) else 0
	1203	!let wq=if ( alt le 1100 ) then max( 1.5e-8 , 3e-11*alt) else 0
	1204	d_t_adv=0.
	1205	d_q_adv=0.
	1206	teta=temp(pzero/play)*rkappa
	1207	d_t_adv=0.
	1208	d_q_adv=0.
	1209	do l=2,llm-1
	1210	if (zlay(l)<=1100) then
	1211	wwww=-0.00001*zlay(l)
	1212	d_t_adv(l)=-wwww(teta(l)-teta(l+1))/(zlay(l)-zlay(l+1)) /(pzero/play(l))*rkappa
	1213	d_q_adv(l,1:2)=-wwww*(q(l,1:2)-q(l+1,1:2))/(zlay(l)-zlay(l+1))
	1214	d_t_adv(l)=d_t_adv(l)+min(-3.75e-5 , -7.5e-8*zlay(l))
	1215	d_q_adv(l,1)=d_q_adv(l,1)+max( 1.5e-8 , 3e-11*zlay(l))
	1216	endif
	1217	enddo
	1218
	1219	endif
	1220
	1221	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1222	! call writefield_phy('dv_age' ,dv_age,llm)
	1223	! call writefield_phy('du_age' ,du_age,llm)
	1224	! call writefield_phy('du_phys' ,du_phys,llm)
	1225	! call writefield_phy('u_tend' ,u,llm)
	1226	! call writefield_phy('u_g' ,ug,llm)
	1227	!
	1228	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1229	!! Increment state variables
	1230	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[3594]	1231	print*,'OLDLMDZ1D AANT'
[3541]	1232	IF (flag_inhib_forcing == 0) then ! if tendency of forcings should be added
[3594]	1233	print*,'OLDLMDZ1D ARES' , forcing_sandu
[3541]	1234
	1235	! pour les cas sandu et astex, on reclacule u,v,q,temp et teta dans 1D_nudge_sandu_astex.h
	1236	! au dessus de 700hpa, on relaxe vers les profils initiaux
	1237	if (forcing_sandu .OR. forcing_astex) then
	1238	#include "1D_nudge_sandu_astex.h"
	1239	else
	1240	u(1:mxcalc)=u(1:mxcalc) + timestep*( &
	1241	& du_phys(1:mxcalc) &
	1242	& +du_age(1:mxcalc)+du_adv(1:mxcalc) &
	1243	& +d_u_nudge(1:mxcalc) )
	1244	v(1:mxcalc)=v(1:mxcalc) + timestep*( &
	1245	& dv_phys(1:mxcalc) &
	1246	& +dv_age(1:mxcalc)+dv_adv(1:mxcalc) &
	1247	& +d_v_nudge(1:mxcalc) )
	1248	q(1:mxcalc,:)=q(1:mxcalc,:)+timestep*( &
	1249	& dq(1:mxcalc,:) &
	1250	& +d_q_adv(1:mxcalc,:) &
	1251	& +d_q_nudge(1:mxcalc,:) )
	1252
	1253	if (prt_level.ge.3) then
	1254	print *, &
	1255	& 'physiq-> temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1) ', &
	1256	& temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1)
	1257	print* ,'dv_phys=',dv_phys
	1258	print* ,'dv_age=',dv_age
	1259	print* ,'dv_adv=',dv_adv
	1260	print* ,'d_v_nudge=',d_v_nudge
	1261	print*, v
	1262	print*, vg
	1263	endif
	1264
	1265	temp(1:mxcalc)=temp(1:mxcalc)+timestep*( &
	1266	& dt_phys(1:mxcalc) &
	1267	& +d_t_adv(1:mxcalc) &
	1268	& +d_t_nudge(1:mxcalc) &
	1269	& +dt_cooling(1:mxcalc)) ! Taux de chauffage ou refroid.
	1270
[3594]	1271	print*,'OLDLMDZ1D IOPH'
	1272	CALL iophys_ecrit('d_t_adv',klev,'d_t_adv','m/s',d_t_adv)
	1273	CALL iophys_ecrit('d_t_nudge',klev,'d_t_nudge','m/s',d_t_nudge)
	1274
[3541]	1275	endif ! forcing_sandu or forcing_astex
	1276
	1277	teta=temp(pzero/play)*rkappa
	1278	!
	1279	!---------------------------------------------------------------------
	1280	! Nudge soil temperature if requested
	1281	!---------------------------------------------------------------------
	1282
	1283	IF (nudge_tsoil .AND. .NOT. lastcall) THEN
	1284	ftsoil(1,isoil_nudge,:) = ftsoil(1,isoil_nudge,:) &
	1285	& -timestep/tau_soil_nudge*(ftsoil(1,isoil_nudge,:)-Tsoil_nudge)
	1286	ENDIF
	1287
	1288	!---------------------------------------------------------------------
	1289	! Add large-scale tendencies (advection, etc) :
	1290	!---------------------------------------------------------------------
	1291
	1292	!cc nrlmd
	1293	!cc tmpvar=teta
	1294	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
	1295	!cc
	1296	!cc teta(1:mxcalc)=tmpvar(1:mxcalc)
	1297	!cc tmpvar(:)=q(:,1)
	1298	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
	1299	!cc q(1:mxcalc,1)=tmpvar(1:mxcalc)
	1300	!cc tmpvar(:)=q(:,2)
	1301	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
	1302	!cc q(1:mxcalc,2)=tmpvar(1:mxcalc)
	1303
	1304	END IF ! end if tendency of tendency should be added
	1305
	1306	!---------------------------------------------------------------------
	1307	! Air temperature :
	1308	!---------------------------------------------------------------------
	1309	if (lastcall) then
	1310	print*,'Pas de temps final ',it
	1311	call ju2ymds(daytime, an, mois, jour, heure)
	1312	print*,'a la date : a m j h',an, mois, jour ,heure/3600.
	1313	endif
	1314
	1315	! incremente day time
	1316	! print*,'daytime bef',daytime,1./day_step
	1317	daytime = daytime+1./day_step
	1318	!Al1dbg
	1319	day = int(daytime+0.1/day_step)
	1320	! time = max(daytime-day,0.0)
	1321	!Al1&jyg: correction de bug
	1322	!cc time = real(mod(it,day_step))/day_step
	1323	time = time_ini/24.+real(mod(it,day_step))/day_step
	1324	! print*,'daytime nxt time',daytime,time
	1325	it=it+1
	1326
	1327	enddo
	1328
	1329	!Al1
	1330	if (ecrit_slab_oc.ne.-1) close(97)
	1331
	1332	!Al1 Call to 1D equivalent of dynredem (an,mois,jour,heure ?)
	1333	! -------------------------------------
	1334	call dyn1dredem("restart1dyn.nc", &
	1335	& plev,play,phi,phis,presnivs, &
	1336	& u,v,temp,q,omega2)
	1337
	1338	CALL abort_gcm ('lmdz1d ','The End ',0)
	1339
	1340	END SUBROUTINE old_lmdz1d
	1341
	1342	#include "old_1DUTILS_read_interp.h"

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format