Context Navigation

← Previous Revision
Latest Revision
Next Revision →
Normal
Revision Log

lmdz_cosp_interface.f90 @ 5268

Last change on this file since 5268 was 5268, checked in by abarral, 8 days ago
.f90 <-> .F90 depending on cpp key use
File size: 24.2 KB

Rev	Line
[3491]	1	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
	2	!
	3	! Nouveau code d'interface entre LMDZ et COSPv2 (version 2)
	4	! L'ancienne interface s'appelait "phys_cosp2" et avait ete concue pour COSPv1.4.
	5	! Dans cette nouvelle version de COSP, le code a ete restructure pour optimiser les calculs
	6	! des differents simulateurs et pour proposer de nouvelles fonctionnalites (par exemple,
	7	! intervenir sur les profils sous-maille, ou subcolumns, donnes en entre a COSP afin que
	8	! leur definition soit coherente avec les parametrisations du modele hote).
	9	! Cette version de COSP propose aussi de nombreux nouveaux diagnostics, notamment pour
	10	! le simulateur lidar (diagnostics CALIPSO-OPAQ, lidar sol 532nm et lidar ATLID 355nm).
	11	!
	12	! Interface reecrite par R.Guzman (01/2019), a partir de l'interface initiale concue
	13	! et ecrite par A.Idelkadi
	14	!
	15	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
	16	! subroutine phys_cosp2( itap,dtime,freq_cosp, &
	17	subroutine lmdz_cosp_interface(itap, dtime, freq_cosp, ok_mensuelCOSP, ok_journeCOSP, &
[3511]	18	ok_hfCOSP, ecrit_mth, ecrit_day, ecrit_hf, ok_all_xml, &
	19	missing_val, Nptslmdz, Nlevlmdz, lon, lat, presnivs, &
	20	overlaplmdz, sunlit, ref_liq, ref_ice, fracTerLic, &
	21	u_wind, v_wind, phis, phi, ph, p, skt, t, sh, rh, &
	22	tca, cca, mr_lsliq, mr_lsice, fl_lsrainI, fl_lssnowI, &
	23	fl_ccrainI, fl_ccsnowI, mr_ozone, dtau_s, dem_s)
[3491]	24
	25	!-------------- Inputs ---------------
	26	! itap, !Increment de la physiq
	27	! dtime, !Pas de temps physiq
	28	! overlaplmdz, !Type Overlap venant de LMDZ
	29	! Npoints, !Nb de points de la grille physiq
	30	! Nlevels, !Nb de niveaux verticaux
	31	! Ncolumns, !Number of subcolumns
	32	! lon,lat, !Longitudes et latitudes de la grille LMDZ
	33	! ref_liq, ref_ice, !Rayons effectifs des particules liq et ice (en micron)
	34	! fracTerLic, !Fraction terre a convertir en masque
	35	! u_wind, v_wind, !Vents a 10m ???
	36	! phi, !Geopotentiel
	37	! phis, !Geopotentiel sol
	38	! ph, !pression pour chaque inter-couche
	39	! p, !Pression aux milieux des couches
	40	! skt, t, !Temp au sol et temp 3D
	41	! sh, !Humidite specifique
	42	! rh, !Humidite relative
	43	! tca, !Fraction nuageuse
	44	! cca !Fraction nuageuse convective
	45	! mr_lsliq, !Liq Cloud water content
	46	! mr_lsice, !Ice Cloud water content
	47	! mr_ccliq, !Convective Cloud Liquid water content
	48	! mr_ccice, !Cloud ice water content
	49	! fl_lsrain, !Large scale precipitation lic
	50	! fl_lssnow, !Large scale precipitation ice
	51	! fl_ccrain, !Convective precipitation lic
	52	! fl_ccsnow, !Convective precipitation ice
	53	! mr_ozone, !Concentration ozone (Kg/Kg)
	54	! dem_s !Cloud optical emissivity
	55	! dtau_s !Cloud optical thickness
	56	! emsfc_lw = 1. !Surface emissivity dans radlwsw.F90
	57
	58
	59	!-------------- Outputs --------------
	60	! La liste complete des diagnostics de sortie (observables simulees) que l'on peut
	61	! avoir avec COSPv2 se trouve au debut du fichier : cosp_read_otputkeys.F90
	62
	63
	64	!!! Modules specifiques a l'interface LMDZ-COSP
	65	use mod_phys_lmdz_para
	66	use mod_grid_phy_lmdz
	67	use ioipsl
	68	use iophy
[4619]	69	use lmdz_xios, ONLY : using_xios
[3491]	70	use lmdz_cosp_output_mod
	71	use lmdz_cosp_output_write_mod
	72	use lmdz_cosp_read_outputkeys
	73	use lmdz_cosp_subsample_and_optics_mod, only : subsample_and_optics
	74	use lmdz_cosp_construct_destroy_mod
	75
	76	!!! Modules faisant partie du code source de COSPv2
[3723]	77	use cosp_kinds, only: wp
	78	use MOD_COSP_CONFIG, only: N_HYDRO,RTTOV_MAX_CHANNELS, &
	79	niv_sorties, vgrid_z_in
	80	use mod_quickbeam_optics, only: size_distribution,hydro_class_init, &
	81	quickbeam_optics_init
	82	use quickbeam, only: radar_cfg
	83	use mod_cosp, only: cosp_init,cosp_optical_inputs, &
	84	cosp_column_inputs,cosp_outputs, &
	85	cosp_simulator
[3491]	86
	87
	88	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
	89	!
	90	! Declaration des variables
	91	!
	92	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
	93
	94	IMPLICIT NONE
	95
	96	! Local variables
[3654]	97	character(len=64),PARAMETER :: cosp_input_nl = 'cospv2_input_nl.txt'
	98	character(len=64),PARAMETER :: cosp_output_nl = 'cospv2_output_nl.txt'
[3491]	99
	100	integer, save :: isccp_topheight, isccp_topheight_direction, overlap
	101	integer, save :: Ncolumns ! Number of subcolumns in SCOPS
	102	integer, save :: Npoints ! Number of gridpoints
	103	!$OMP THREADPRIVATE(Npoints)
	104	integer, save :: Nlevels ! Number of model vertical levels
	105	integer :: Nptslmdz, Nlevlmdz ! Nb de points issus de physiq.F
	106	integer, save :: Npoints_it ! Max number of gridpoints to be
	107	! processed in one iteration
	108	type(cosp_config), save :: cfg ! Variable qui contient les cles
	109	! logiques des simulateurs et des
	110	! diagnostics, definie dans:
	111	! lmdz_cosp_construct_destroy_mod
	112	!$OMP THREADPRIVATE(cfg)
	113
	114	integer :: t0, t1, count_rate, count_max
	115	real(wp), save :: cloudsat_radar_freq, cloudsat_k2, rttov_ZenAng, co2, &
	116	ch4, n2o, co, emsfc_lw
	117	!$OMP THREADPRIVATE(emsfc_lw)
	118
	119	integer, dimension(RTTOV_MAX_CHANNELS), save :: rttov_Channels
	120	real(wp), dimension(RTTOV_MAX_CHANNELS), save :: rttov_Surfem
	121	integer, save :: surface_radar, use_mie_tables, &
	122	cloudsat_use_gas_abs, cloudsat_do_ray, &
	123	melt_lay
	124	integer, save :: lidar_ice_type
	125	integer, save :: rttov_platform, rttov_satellite, &
	126	rttov_Instrument, rttov_Nchannels
	127	logical, save :: use_vgrid_in, csat_vgrid_in, &
	128	use_precipitation_fluxes
	129
	130	! Declaration necessaires pour les sorties IOIPSL
	131	real :: ecrit_day, ecrit_hf, ecrit_mth, missing_val
	132	logical :: ok_mensuelCOSP, ok_journeCOSP, ok_hfCOSP, ok_all_xml
	133	logical, save :: debut_cosp=.true.
	134	!$OMP THREADPRIVATE(debut_cosp)
	135
	136	logical, save :: first_write=.true.
	137	!$OMP THREADPRIVATE(first_write)
	138
	139	integer, save :: cosp_init_flag = 0
	140	!$OMP THREADPRIVATE(cosp_init_flag)
	141
	142
	143	!----------------------------- Input variables from LMDZ-GCM -------------------------------
	144	integer :: overlaplmdz ! overlap type: 1=max,
	145	! 2=rand, 3=max/rand
	146	real, dimension(Nptslmdz,Nlevlmdz) :: phi, p, ph, T, sh, rh, tca, cca, mr_lsliq, &
	147	mr_lsice, mr_ccliq, mr_ccice, fl_lsrain, &
	148	fl_lssnow, fl_ccrain, fl_ccsnow, fl_lsgrpl, &
	149	zlev, zlev_half, mr_ozone, radliq, radice, &
	150	dtau_s, dem_s, dtau_c, dem_c, ref_liq, ref_ice
	151	real, dimension(Nptslmdz,Nlevlmdz) :: fl_lsrainI, fl_lssnowI, fl_ccrainI, fl_ccsnowI
	152	real, dimension(Nptslmdz) :: lon, lat, skt, fracTerLic, u_wind, v_wind, &
	153	phis, sunlit
	154	real, dimension(Nptslmdz) :: land ! variables intermediaire pour masque TerLic
	155	real, dimension(Nlevlmdz) :: presnivs
	156	integer :: itap, k, ip
	157	real :: dtime, freq_cosp
	158	real, dimension(2) :: time_bnds
	159
	160	double precision :: d_dtime
	161	double precision, dimension(2) :: d_time_bnds
	162
	163
	164	! ######################################################################################
	165	! Declarations specific to COSP2
	166	! ######################################################################################
	167
	168	! Local variables
	169	logical :: &
	170	Lsingle = .true., & ! True if using MMF_v3_single_moment CLOUDSAT
	171	! microphysical scheme (default)
	172	Ldouble = .false. ! True if using MMF_v3.5_two_moment CLOUDSAT
	173	! microphysical scheme
	174	type(size_distribution), save :: sd ! Hydrometeor description
	175	!$OMP THREADPRIVATE(sd)
	176	type(radar_cfg), save :: rcfg_cloudsat ! Radar configuration
	177	!$OMP THREADPRIVATE(rcfg_cloudsat)
	178	real, dimension(Nptslmdz,Nlevlmdz,N_HYDRO) :: Reff ! Liquid and Ice particles
	179	! effective radius
	180	type(cosp_outputs) :: cospOUT ! COSP simulator outputs
	181	type(cosp_optical_inputs) :: cospIN ! COSP optical (or derived?)
	182	! fields needed by simulators
	183	type(cosp_column_inputs) :: cospstateIN ! COSP model fields needed
	184	! by simulators
	185	character(len=256), dimension(100) :: cosp_status
	186	character(len=64), save :: cloudsat_micro_scheme
	187
	188	! Indices to address arrays of LS and CONV hydrometeors
	189	integer,parameter :: &
	190	I_LSCLIQ = 1, & ! Large-scale (stratiform) liquid
	191	I_LSCICE = 2, & ! Large-scale (stratiform) ice
	192	I_LSRAIN = 3, & ! Large-scale (stratiform) rain
	193	I_LSSNOW = 4, & ! Large-scale (stratiform) snow
	194	I_CVCLIQ = 5, & ! Convective liquid
	195	I_CVCICE = 6, & ! Convective ice
	196	I_CVRAIN = 7, & ! Convective rain
	197	I_CVSNOW = 8, & ! Convective snow
	198	I_LSGRPL = 9 ! Large-scale (stratiform) groupel
	199
	200	! Parametres qui sont lus a partir du fichier "cosp_input_nl.txt"
[3723]	201	namelist/COSP_INPUT/overlap, isccp_topheight, isccp_topheight_direction, &
	202	npoints_it, ncolumns, use_vgrid_in, csat_vgrid_in, &
	203	cloudsat_radar_freq, surface_radar, use_mie_tables, &
	204	cloudsat_use_gas_abs, cloudsat_do_ray, melt_lay, cloudsat_k2, &
	205	cloudsat_micro_scheme, lidar_ice_type, use_precipitation_fluxes, &
[3491]	206	rttov_platform, rttov_satellite, rttov_Instrument, rttov_Nchannels, &
	207	rttov_Channels, rttov_Surfem, rttov_ZenAng, co2, ch4, n2o, co
	208
	209	!------------------------ Fin declaration des variables ------------------------
	210
	211
	212	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
	213	!
	214	! 1) Lecture du fichier "cosp_input_nl.txt", parametres d'entree pour COSP
	215	!
	216	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
	217
[3723]	218	print*,'Entree lmdz_cosp_interface' !phys_cosp2'
	219	if (debut_cosp) then
[3491]	220	NPoints=Nptslmdz
	221	Nlevels=Nlevlmdz
	222	! Surface emissivity
	223	emsfc_lw = 1.
	224
	225	! Lecture du namelist input
	226	! CALL read_cosp_input
	227	IF (is_master) THEN
	228	OPEN(10,file=cosp_input_nl,status='old')
	229	READ(10,nml=cosp_input)
	230	CLOSE(10)
	231	ENDIF
	232
	233
	234	!$OMP BARRIER
	235	CALL bcast(overlap)
	236	CALL bcast(isccp_topheight)
	237	CALL bcast(isccp_topheight_direction)
	238	CALL bcast(npoints_it)
	239	CALL bcast(ncolumns)
	240	CALL bcast(use_vgrid_in)
	241	CALL bcast(csat_vgrid_in)
	242	CALL bcast(cloudsat_radar_freq)
	243	CALL bcast(surface_radar)
	244	CALL bcast(cloudsat_use_gas_abs)
	245	CALL bcast(cloudsat_do_ray)
	246	CALL bcast(cloudsat_k2)
	247	CALL bcast(lidar_ice_type)
	248	CALL bcast(use_precipitation_fluxes)
	249	CALL bcast(rttov_platform)
	250	CALL bcast(rttov_satellite)
	251	CALL bcast(rttov_Instrument)
	252	CALL bcast(rttov_Nchannels)
	253	CALL bcast(rttov_Channels)
	254	CALL bcast(rttov_Surfem)
	255	CALL bcast(rttov_ZenAng)
	256	CALL bcast(co2)
	257	CALL bcast(ch4)
	258	CALL bcast(n2o)
	259	CALL bcast(co)
	260	CALL bcast(cloudsat_micro_scheme)
	261
	262	print*,'ok read cosp_input_nl'
	263
	264	! Clefs Outputs initialisation
[4619]	265	IF (using_xios) THEN
	266	call cosp_outputkeys_init(cfg)
	267	ELSE
[3491]	268	call read_cosp_output_nl(itap,cosp_output_nl,cfg)
[4619]	269	ENDIF
[3491]	270
	271	print*,' Cles des differents simulateurs cosp a itap :',itap
[3723]	272	print*,'cfg%Lcloudsat, cfg%Lcalipso, cfg%LgrLidar532, cfg%Latlid, cfg%Lparasol, &
[3491]	273	cfg%Lisccp, cfg%Lmisr, cfg%Lmodis, cfg%Lrttov', &
	274	cfg%Lcloudsat, cfg%Lcalipso, cfg%LgrLidar532, cfg%Latlid, cfg%Lparasol, &
[3723]	275	cfg%Lisccp, cfg%Lmisr, cfg%Lmodis, cfg%Lrttov
[3491]	276
	277	if (overlaplmdz.ne.overlap) then
	278	print*,'Attention overlaplmdz different de overlap lu dans namelist '
	279	endif
	280
[4619]	281	IF (using_xios) THEN
	282	print*,'On passe par using_xios'
	283	ELSE
	284	if (cosp_init_flag .eq. 0) then
[3491]	285
[4619]	286	! Initialize the distributional parameters for hydrometeors in radar simulator.
	287	! In COSPv1.4, this was declared in cosp_defs.f.
	288	if (cloudsat_micro_scheme == 'MMF_v3.5_two_moment') then
	289	ldouble = .true.
	290	lsingle = .false.
	291	endif
	292	call hydro_class_init(lsingle,ldouble,sd)
	293	call quickbeam_optics_init()
	294
	295	print*,' just before call COSP_INIT, cosp_init_flag =', cosp_init_flag
	296	call COSP_INIT(cfg%Lisccp, cfg%Lmodis, cfg%Lmisr, cfg%Lcloudsat, cfg%Lcalipso, &
	297	cfg%LgrLidar532, cfg%Latlid, cfg%Lparasol, cfg%Lrttov, &
	298	cloudsat_radar_freq, cloudsat_k2, cloudsat_use_gas_abs, &
	299	cloudsat_do_ray, isccp_topheight, isccp_topheight_direction, &
	300	surface_radar, rcfg_cloudsat, use_vgrid_in, csat_vgrid_in, &
	301	niv_sorties, Nlevels, cloudsat_micro_scheme)
	302	cosp_init_flag = 1
	303	print*,' just after call COSP_INIT, cosp_init_flag =', cosp_init_flag
[3491]	304	endif
[4619]	305	ENDIF
[3491]	306
[3723]	307	print*,'Fin lecture Namelists, debut_cosp =',debut_cosp
[3491]	308
	309	endif ! debut_cosp
	310
	311
	312	!!! Ici on modifie les cles logiques pour les outputs selon les champs actives dans les .xml
[3723]	313	if ((itap.ge.1).and.(first_write))then
[4619]	314	IF (using_xios) call read_xiosfieldactive(cfg)
[3491]	315	first_write=.false.
	316
	317	if (cosp_init_flag .eq. 0) then
	318
	319	! Initialize the distributional parameters for hydrometeors in radar simulator.
	320	! In COSPv1.4, this was declared in cosp_defs.f.
	321	if (cloudsat_micro_scheme == 'MMF_v3.5_two_moment') then
	322	ldouble = .true.
	323	lsingle = .false.
	324	endif
	325	call hydro_class_init(lsingle,ldouble,sd)
	326	call quickbeam_optics_init()
	327
[3723]	328	print*,' just before call COSP_INIT, cosp_init_flag =', cosp_init_flag
[3491]	329	call COSP_INIT(cfg%Lisccp, cfg%Lmodis, cfg%Lmisr, cfg%Lcloudsat, cfg%Lcalipso, &
[3723]	330	cfg%LgrLidar532, cfg%Latlid, cfg%Lparasol, cfg%Lrttov, &
	331	cloudsat_radar_freq, cloudsat_k2, cloudsat_use_gas_abs, &
	332	cloudsat_do_ray, isccp_topheight, isccp_topheight_direction, &
	333	surface_radar, rcfg_cloudsat, use_vgrid_in, csat_vgrid_in, &
	334	niv_sorties, Nlevels, cloudsat_micro_scheme)
	335	cosp_init_flag = 1
[3491]	336	print*,' just after call COSP_INIT, cosp_init_flag =', cosp_init_flag
	337	endif ! cosp_init_flag
	338
	339
	340	print*,' Cles des differents simulateurs cosp a itap :',itap
	341	print*,'cfg%Lcloudsat, cfg%Lcalipso, cfg%LgrLidar532, cfg%Latlid, cfg%Lparasol, &
	342	cfg%Lisccp, cfg%Lmisr, cfg%Lmodis, cfg%Lrttov', &
	343	cfg%Lcloudsat, cfg%Lcalipso, cfg%LgrLidar532, cfg%Latlid, cfg%Lparasol, &
	344	cfg%Lisccp, cfg%Lmisr, cfg%Lmodis, cfg%Lrttov
	345
	346	endif !(itap.gt.1).and.(first_write)
	347
	348	time_bnds(1) = dtime-dtime/2.
	349	time_bnds(2) = dtime+dtime/2.
	350
	351	d_time_bnds=time_bnds
	352	d_dtime=dtime
	353
	354	!------------------------- Fin initialisation de COSP --------------------------
	355
	356
	357	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
	358	!
	359	! 3) Calculs des champs d'entree COSP a partir des variables LMDZ
	360	!
	361	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
	362
	363	! 0) Create ptop/ztop for gbx%pf and gbx%zlev are for the the interface,
	364	! also reverse CAM height/pressure values for input into CSOP
	365	! CAM state%pint from top to surface, COSP wants surface to top.
	366
	367	! 0) Altitudes du modele calculees a partir de la variable geopotentiel phi et phis
	368	zlev = phi/9.81
	369
	370	zlev_half(:,1) = phis(:)/9.81
	371	do k = 2, Nlevels
	372	do ip = 1, Npoints
	373	zlev_half(ip,k) = phi(ip,k)/9.81 + &
	374	(phi(ip,k)-phi(ip,k-1))/9.81 * (ph(ip,k)-p(ip,k)) / (p(ip,k)-p(ip,k-1))
	375	enddo
	376	enddo
	377
	378	! 1) Quantite de nuages (couverture?), convectif (=0) et total
	379	cca = 0._wp ! convective_cloud_amount (1)
	380	tca = tca ! total_cloud_amount (1)
	381
	382	! 2) Humidite relative est donnee tel quel (variable rh)
	383
	384	! 3) Masque terre/mer a partir de la variable fracTerLic
	385	do ip = 1, Npoints
	386	if (fracTerLic(ip).ge.0.5) then
	387	land(ip) = 1.
	388	else
	389	land(ip) = 0.
	390	endif
	391	enddo
	392
	393
	394	! A voir l equivalent LMDZ
	395	mr_ccliq = 0.0
	396	mr_ccice = 0.0
	397	!!! gbx%mr_hydro(:,:,I_LSCLIQ) = mr_lsliq !mixing_ratio_large_scale_cloud_liquid (kg/kg)
	398	!!! gbx%mr_hydro(:,:,I_LSCICE) = mr_lsice !mixing_ratio_large_scale_cloud_ic
	399	!!! gbx%mr_hydro(:,:,I_CVCLIQ) = mr_ccliq !mixing_ratio_convective_cloud_liquid
	400	!!! gbx%mr_hydro(:,:,I_CVCICE) = mr_ccice !mixing_ratio_convective_cloud_ice
	401	! A revoir
	402	fl_lsrain = fl_lsrainI + fl_ccrainI
	403	fl_lssnow = fl_lssnowI + fl_ccsnowI
	404	!!! gbx%rain_ls = fl_lsrain !flux_large_scale_cloud_rain (kg m^-2 s^-1)
	405	!!! gbx%snow_ls = fl_lssnow !flux_large_scale_cloud_snow
	406	! A voir l equivalent LMDZ
	407	fl_lsgrpl = 0.
	408	fl_ccsnow = 0.
	409	fl_ccrain = 0.
	410	!!! gbx%grpl_ls = fl_lsgrpl !flux_large_scale_cloud_graupel
	411	!!! gbx%rain_cv = fl_ccrain !flux_convective_cloud_rain
	412	!!! gbx%snow_cv = fl_ccsnow !flux_convective_cloud_snow
	413
	414	! ISCCP simulator
	415	dtau_c = 0.
	416	dem_c = 0.
	417
	418	! note: reff_cosp dimensions should be same as cosp (reff_cosp has 9 hydrometeor dimension)
	419	Reff(1:Npoints,1:Nlevels,1:N_HYDRO) = 0.
	420	Reff(:,:,I_LSCLIQ) = ref_liq*1e-6
	421	Reff(:,:,I_LSCICE) = ref_ice*1e-6
	422	Reff(:,:,I_CVCLIQ) = ref_liq*1e-6
	423	Reff(:,:,I_CVCICE) = ref_ice*1e-6
	424
	425
	426	if (cosp_init_flag .eq. 1) then ! cosp_init_flag = 1
	427
	428	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
	429	!
	430	! 4a) On construit la variable cospOUT qui contient tous les diagnostics de sortie.
	431	! Elle sera remplie lors de l'appel du simulateur COSP
	432	!
	433	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
	434
	435	call construct_cosp_outputs(cfg,Npoints,Ncolumns,Nlevels,niv_sorties,0,cospOUT)
	436
	437
	438	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
	439	!
	440	! 4b) On construit la variable cospstateIN que l'on va remplir avec les champs LMDZ
	441	! Les champ verticaux doivent etre donnes a l'envers, c-a-d : (Nlevels:1) = (TOA:SFC)
	442	!
	443	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
	444
	445	call construct_cospstateIN(Npoints,Nlevels,0,cospstateIN)
	446
	447	cospstateIN%lat = lat(1:Npoints)
	448	cospstateIN%lon = lon(1:Npoints)
	449	cospstateIN%at = t(1:Npoints,Nlevels:1:-1)
	450	cospstateIN%qv = sh(1:Npoints,Nlevels:1:-1)
	451	cospstateIN%o3 = mr_ozone(1:Npoints,Nlevels:1:-1)
	452	cospstateIN%sunlit = sunlit(1:Npoints)
	453	cospstateIN%skt = skt(1:Npoints)
	454	cospstateIN%land = land(1:Npoints)
	455	cospstateIN%surfelev = zlev_half(1:Npoints,1)
	456	cospstateIN%pfull = p(1:Npoints,Nlevels:1:-1)
	457	cospstateIN%phalf(1:Npoints,1) = 0._wp
	458	cospstateIN%phalf(1:Npoints,2:Nlevels+1) = ph(1:Npoints,Nlevels:1:-1)
	459	cospstateIN%hgt_matrix = zlev(1:Npoints,Nlevels:1:-1)
	460	cospstateIN%hgt_matrix_half(1:Npoints,Nlevels+1) = 0._wp
	461	cospstateIN%hgt_matrix_half(1:Npoints,1:Nlevels) = zlev_half(1:Npoints,Nlevels:1:-1)
	462
	463
	464	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
	465	!
	466	! 4c) On construit la variable cospIN qui contient les proprietes optiques subcolumn
	467	! pour COSP. Elle sera essentiellement remplie dans la subroutine subsample_and_optics
	468	! ou sont appeles SCOPS, PREC_SCOPS et les subroutines qui calculent les signaux
	469	! simules pour chaque simulateur actif.
	470	!
	471	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
	472
	473	call construct_cospIN(cfg,Npoints,Ncolumns,Nlevels,cospIN)
	474	cospIN%emsfc_lw = emsfc_lw
	475	if (cfg%Lcloudsat) cospIN%rcfg_cloudsat = rcfg_cloudsat
	476
	477
	478	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
	479	!
	480	! 5) Appel de subsample_and_optics : Les champs verticaux doivent etre donnes a
	481	! l'envers comme pour le remplissage de cospstateIN, c-a-d : (Nlevels:1) = (TOA:SFC)
	482	!
	483	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
	484
	485	call subsample_and_optics(cfg, Npoints, Nlevels, Ncolumns, N_HYDRO,overlap, &
	486	use_precipitation_fluxes, lidar_ice_type, sd, &
	487	tca(1:Npoints,Nlevels:1:-1), cca(1:Npoints,Nlevels:1:-1), &
	488	fl_lsrain(1:Npoints,Nlevels:1:-1), &
	489	fl_lssnow(1:Npoints,Nlevels:1:-1), &
	490	fl_lsgrpl(1:Npoints,Nlevels:1:-1), &
	491	fl_ccrain(1:Npoints,Nlevels:1:-1), &
	492	fl_ccsnow(1:Npoints,Nlevels:1:-1), &
	493	mr_lsliq(1:Npoints,Nlevels:1:-1), &
	494	mr_lsice(1:Npoints,Nlevels:1:-1), &
	495	mr_ccliq(1:Npoints,Nlevels:1:-1), &
	496	mr_ccice(1:Npoints,Nlevels:1:-1), &
	497	Reff(1:Npoints,Nlevels:1:-1,:), &
	498	dtau_c(1:Npoints,Nlevels:1:-1), &
	499	dtau_s(1:Npoints,Nlevels:1:-1), &
	500	dem_c(1:Npoints,Nlevels:1:-1), &
	501	dem_s(1:Npoints,Nlevels:1:-1), cospstateIN, cospIN)
	502
	503
	504	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
	505	!
	506	! 6) On appelle le simulateur COSPv2
	507	!
	508	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
	509
	510	print*,'call simulateur'
	511
	512	cosp_status = COSP_SIMULATOR(cospIN, cospstateIN, cospOUT, 1, Npoints, debug=.false.)
	513
	514	endif ! cosp_init_flag = 1
	515
	516
	517	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
	518	!
	519	! 7a) Ecriture des sorties 1: on cree d'abord les fichiers NCDF pour ecrire les sorties
	520	! en appelant lmdz_cosp_output_open (lors du premier appel de cette interface pour les
	521	! 2 options d'ecriture), ou sont definis les axes et les caracteristiques
	522	! des fichiers de sortie avec les diagnostics.
	523	!
	524	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
	525
	526	if (debut_cosp) then
	527	!$OMP MASTER
	528
	529	print *, ' Open outpts files and define axis'
	530	call lmdz_cosp_output_open(Nlevlmdz, Ncolumns, presnivs, dtime, freq_cosp, &
	531	ok_mensuelCOSP, ok_journeCOSP, ok_hfCOSP, ok_all_xml, &
	532	ecrit_mth, ecrit_day, ecrit_hf, use_vgrid_in, &
	533	niv_sorties, vgrid_z_in, zlev(1,:))
	534
	535	!$OMP END MASTER
	536	!$OMP BARRIER
	537	debut_cosp=.false.
	538	endif ! debut_cosp
	539
	540	if (cosp_init_flag .eq. 1) then
	541
	542	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
	543	!
	544	! 7b) Ecriture des sorties 2: le remplissage des fichiers de sortie se fait a chaque
	545	! appel de cette interface avec une difference entre les 2 options d'ecriture:
	546	!
	547	! AVEC xios, on commence a remplir les fichiers de sortie a partir du DEUXIEME
	548	! appel de cette interface (lorsque cosp_init_flag = 1).
	549	!
	550	! SANS xios, on commence a remplir les fichiers de sortie a partir du PREMIER
	551	! appel de cette interface (lorsque cosp_init_flag = 1).
	552	!
	553	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
	554
	555	print *, 'Calling write output'
	556	call lmdz_cosp_output_write(Nlevlmdz, Npoints, Ncolumns, itap, dtime, freq_COSP, &
[3723]	557	missing_val, cfg, niv_sorties, cospOUT)
[3491]	558
	559	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
	560	!
	561	! 8) On libere la memoire allouee lors de cet appel a l'interface
	562	!
	563	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
	564
	565	call destroy_cospIN(cospIN)
	566	call destroy_cospstateIN(cospstateIN)
	567	call destroy_cosp_outputs(cospOUT)
	568
	569	endif ! cosp_init_flag = 1
	570
	571	end subroutine lmdz_cosp_interface

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format